Another advantage of an Apple Macintosh computer is that they come with a much better built-in sound card than those of almost any brand of Windows PC. You can actually use the headphone audio output of any model of Apple Macintosh without needing a professional audio internal or external audio interface and get acceptable results. Of course, if you do in fact want the highest-quality audio output, especially for multiple channels, you would want to purchase a third-party external audio interface.
The first Hagstrom electrics actually came to the U.S. beginning about 1959, carrying the Goya name imported by New York’s Hershman (Goya acoustics were made by Levin, also in Sweden). These were the now-legendary sparkle-covered hollowbody “Les Pauls” with the modular pickup units. However, while the Goya acoustics continued on in the ’60s (eventually to be distributed by Avnet, the owners of Guild in the late ’60s), the Hagstrom electrics took on their own identity and switched to Merson. The first Hagstrom I guitars were the little vinyl-covered mini-Strats with the “swimming pool” pickup assemblies – basically two single-coil pickups mounted in a molded plastic assembly looking like its nickname, with sliding on-off switches and the Hagstrom fulcrum vibrato (which was also used on early Guild solidbodies). These were followed by similar wood-bodied Hagstrom IIs, then the quasi-SG Hagstrom IIIs in the ’60s. Hagstrom electrics continued to be imported by Merson through most of the ’60s, but by the ’70s distribution had switched to Ampeg, which was responsible for the Swedes, and several thinlines, some of which were designed by Jimmy D’Aquisto. Hagstrom hung around until the early ’80s before disappearing.
Our first impression of this guitar was that something must be wrong. Surely this guitar is way more expensive than we thought? We doublechecked and the truth is that it’s just incredible value for money. Both the design and the sound are wonderfully good and we understand why Schecter describe their Schecter Hellraiser guitars as having “raised the bar on sight, sound, quality and affordability”- we totally agree!

Now as for flipping the whole bridge, yes, in some cases this may help you. Try it out and see what happens. Just an extra mm or two could make all the difference. One thing to watch out for, though. The notches on your saddles might not all be the same. Often you will have wider notches for the wound strings and thinner notches for the unwound strings. So you might have to swap these all around.
Gitar Tricks are listening (see quote in bold) and as a result I have upgraded my Review Rating of this awesome Online Guitar Training Program. My previous review highlighted problems with the Video Loop Feature and the lack of Speed Control I am so happy that Guitar Tricks have released an immensely improved Video Player with faster video loading time, more accurate and reliable A/B looping and added a Video Timeline Preview that displays thumbnail images of the video at various points as you hover over the timeline. Another feature of the new player is the ability to adjust the speed via the Slow Motion feature.
You can trace all things loud and riff-y right back to the Kinks' Dave Davies, starting with the fantastically simple power chords of "You Really Got Me," which he recorded at age 17 – setting off a run of proto-metal singles from "All Day and All of the Night" to "Till the End of the Day." Davies, who created the distortion on "You Really Got Me" by slicing an amp speaker with a razor, has laughed off claims that it was actually played by an uncredited Jimmy Page: "Who'd want to play a solo that crazy, anyway? Only Dave Davies could do that."
Today, Van Halen is one of rock’s most influential and imitated innovators. As unpredictable and flamboyant as Hendrix, Van Halen has had an unmeasurable impact on the guitar community. By the mid Eighties, his self-described “brown” sound, over-the-top techniques (including two-handed tapping), and revolutionary trem-bar effects inspired a generation of aspiring guitarists who bought the one-pickup, one-volume-knob, Floyd Rose–equipped Strat-style guitars that Van Halen made famous.
After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
The enormous world of electric guitars can seem daunting to navigate. While there is no best or worst guitar, there are guitars that have been ingrained into our collective headspace. There are also guitars that have pushed boundaries and become staples of the modern musical landscape. Putting aside the latest in guitar tech or rare vintage gems, let’s take a look at models that have time and time again satisfied and inspired players of all tastes and from all walks of life. Here are five of the most popular electric guitars in the world.
WahWah ('Filter' category): What's a guitar rack without a Wah? Cubase's is really quite good: not only can you vary the band‑pass filter frequency, you can set high‑ and low‑frequency limits, and the Q at those limits. The frequency responds to host automation, but if you want to do real‑time pedalling, the WahWah shows up as a destination in any inserted MIDI track, so you just need a MIDI foot controller. Because insert four comes before the amp simulator, adding a wah there more faithfully duplicates the traditional rock wah sound, where guitarists patched it between the guitar and (usually overdriven) amp. The filter changes thus occur before distortion, which gives a very different sound compared to placing it after distortion. For more emphasis on the wah sound, you could remove the StereoDelay or StereoEnhancer effect, and place the WahWah in one of those slots instead.
Most Humbuckers are wired in anti-phase, where the opposing polarity of the localised magnetic fields cancel each others out at selective points, creating a lower bandwidth region in the high frequency domain. Less bandwidth = lower noise. If done correctly, with carefully designed pickups, it will not affect the tone, but traditionally it did, because Hillbilly wannabe technicians made the things on their knees.
So what are acousticelectric guitars? Quite simply, it’s an acoustic guitar with slight modifications that means it can be plugged into a power amp. This means that the sound from the guitar can be made much louder for use live or with a band. It also means that, as the signal becomes electric, it can be altered with effects pedals and other equipment. Sometimes, because of this, electric acoustics are used when recording in a studio, though a microphone is often used too.
The simplest close-miking technique using a single mic is one that’s familiar to anyone who has gigged in a venue large enough to have a full sound-support system. Stick a Shure SM57 or similar dynamic mic within an inch of the grille, and away you go. This technique frequently delivers a direct, punchy, in-your-face guitar tone that feels muscular in rock-oriented tracks. If you have a Royer R-121 ribbon mic or some other good ribbon or condenser option that can handle the sound-pressure levels involved in close-miking a guitar cab, these will offer variations on the traditional mids-forward SM57 flavor. In many circumstances this simple technique proves entirely adequate, or at least makes a good foundation to build upon, but you still need to consider exactly where to position that mic, and subtle variations of approach will reveal nuanced differences in the tones you can achieve. Also, if you’re playing a combo or extension cab with more than one speaker, listen carefully to determine which is the best-sounding speaker – or the one that’s right for the track – and mic that one (if you’re not sure, and have two appropriate mics, record two speakers to separate tracks to select from later, more of which below).
▽ Your account minimum payment amount is determined by the purchases and balances on your WebBank/Gettington Credit Account. The change in minimum payment amount is based on your minimum payment due on your last statement, and includes an assumption of interest charges and SafeLine fees, as applicable. The change in minimum payment amount does not include some subsequent activity on your account as of your last statement, such as backordered, unshipped, returned or other pending purchases or exchanges; any payments, including partial, missed or returned payments; any fees, including recurring partner program charges, subsequent interest charges, late fees or returned payment fees. It is also subject to change based on shipping address, shipping method, partial shipments and taxes. Your minimum payment amount will not change and the purchase will not reflect on your statement until the order ships. If you have a balance or are making a multiple item purchase, see the Existing Balance Payment Chart.

You’ll need to get yourself setup with an account on some of the web stores selling components such as effects pedal specialty stores listed above, and some general component stores such as Mouser and Digikey. AMZ provides a list of the components required for each project. Make sure you check carefully the component requirements such as type of capacitors. Many components may have suitable electrical values but different physical layouts, so use the datasheets for your chosen component. Measure the spaces and holes on your PCB to make sure the components will fit. Remember that you’ll also need an enclosure in which to install the finished circuit and don’t forget things such as knobs, battery holders etc.
Guitar effects pedals are a great way to get started with electronics. The simplest ones only require some basic skills to assemble. The few parts can be easily obtained, and the minimum of tools required can be purchased quite cheaply. Better still is the gratification from plugging it in for the first time and being able to incorporate a pedal that you made yourself into your music. With the skills you acquire, you can graduate from simple to more complex projects; maybe build an entire pedal board of your own effects. Your friends might ask you to build pedals for them too. What you learn can also be put to use with commercial pedals, as you will better understand how they work, and will be able to repair and hot rod old pedals. If you are interested in working at a repair shop, as a guitar tech, or for an electronics company in the future, your portfolio of home built pedals will be a great advertisement for your skills.
{"id": "114572014", "categoryId":"site5AAG", "name":"Used S421 S Series Solid Body Electric Guitar", "pageUrl":"/Used/Ibanez/S421-S-Series-Solid-Body-Electric-Guitar-114572014.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/S421-S-Series-Solid-Body-Electric-Guitar/000000114572014-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"239.99", "priceMin":"239.99", "priceMax":"239.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"Ibanez", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"159269514523", "priceVisibility": "", "itemType": "Used"}
Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011. Retrieved 9 October 2012.
Usually, electric guitars have six metallic strings – although there are certain variants used in specific musical styles with seven or even a dozen strings (six pairs). This kind of guitar is used in all kinds of musical styles, from jazz, to metal, pop... and of course Rock'n'Roll music. Actually, the origins of the electric guitar can be traced back to the 1930s Swing-era Jazz movement, when guitarists started experimenting with steel pickups adapted to their hollow-bodied instruments, as a way to get a louder, more substantial sound than what would be possible from a regular guitar. The first commercial electric guitars came up in the mid 1940s, and by then a solid-body was already in use – thus introducing the much familiar look that's now typically associated with electric guitars.
Most of Peter, Paul and Mary’s work had splendid fingerstyle guitar work. My favorite is “Don’t Think Twice It’s Alright”. Paul Stookey also had some fine acoustic work going solo with stuff like “Sebastian” and “The Wedding Song”. “The Wedding Song” was supposedly “must learn” stuff for aspiring acoustic players in the 70’s (so they could play at their friends’ weddings).
Jamplay is a large YouTube Channel featuring all levels of guitar lessons from the very basic, beginners’ guides to expert levels and, of course, some videos that dissect popular songs or styles down to the last finger and fret. It has big range of different players and “teachers”, so if you maybe find one guy a bit hard to understand or perhaps you don’t quite connect with his style, look around and you’ll soon find someone else.

Chicago’s vintage guitar shop is located in Ravenswood just west of Lincoln Square. Rock N Roll Vintage is your one stop shop in Chicago for new guitars, vintage guitars, Chicago guitar lessons, guitar pedals, and we are currently the largest synth dealer in the Midwest. Looking for a specific guitar? Rock N Roll Vintage Guitar Shop carries Fender, Gibson, Martin, Gretsch, Rickenbacker and other popular guitars and basses including boutique amps. We have one of the largest selections of effects pedals in Chicago with many hard to find boutique pedal brands.


Gibson originally offered a single cutaway from the guitar body, so that players could access higher frets.  Notice that Fender includes a double cutaway design so the player’s thumb also has access to the higher side of the neck.  Gibson used “3 On A Side” tuners, so Fender offered “6 Inline” tuning pegs.  It was these choices that created a large part of the visual appeal of the Strat.
A variety of labels are used for level attenuation potentiometers (knobs) in a guitar amplifier and other guitar equipment. Electric guitars and basses have a volume control on the instrument that attenuates the signal from selected pickups. There may be two volume controls on an electric guitar or bass, wired in parallel to mix the signal levels from the neck and bridge pickups. Rolling back the guitar's volume control also changes the pickup's equalization or frequency response, which can provide pre-distortion equalization.
On some amps, setting the "gain" or "drive" control above a certain setting causes an overdrive effect, either due to the natural effect of overloading the preamplifier (or the preamp tube on a tube amplifier) and/or due to a distortion effect being turned on. Tube amplifiers typically also have a "standby" switch in addition to an "on/off" switch. Controls are typically mounted on the front of the amplifier near the top of the cabinet; often the knobs are recessed so that they do not project beyond the wooden cabinet, to protect the knobs during transportation. On amplifier "heads", protective metal U-shaped protrusions may be used to protect the knobs during transportation. On some amps, notably Roland models, the knobs and switches may be on top of the amplifier, at the rear of the top surface. Again, the knobs are usually recessed below the top of the wooden cabinet to protect them.
In the fall of 1954, Daniel started production of solidbody guitars for Sears, under the Silvertone name. He also produced the same guitars under the Danelectro name, sold to other jobbers. These early models didn't have truss rods but had a 3/4" square aluminum tube beginning at the peghead and through the body to the bridge. The bodies were constructed of solid Poplar wood. The Silvertone models were covered with a dark maroon vinyl covering, while the Danelectro models were covered in a whitish tweed material. Both lines came with either 1 or 2 pickups, concealed under a baked melamine pickguard. Concentric stacked tone and volume knobs were used on the two pickup models only. Notably, when both pickups were used together, the tone was much stronger. This was due to wiring the pickups in series, instead of parallel like most other maker's two pickup guitars.
Most guitar especially for those which have more than 1 pickup have selector switch. Attached on the body and normally below the 1st E string on the body of a stratocaster guitar. And on the top shoulder for Les Paul. Its a basic things to understand the switches on which pickups its toggling. First, you need to understand what is the switch for???
Radial Engineering Ltd. is a manufacturer of professional audio products based in Vancouver, British Columbia, Canada. The company offers a wide array of products that are sold under brand names such as Radial, Tonebone, Primacoustic, Reamp and Zebracase. These are offered through a network of dealers and distributors that span the globe. Quality construction, exceptional audio performance and superb customer service are the underpins that have served to make Radial one of the most respected and trusted brands in the industry.

Microphonic Pickups: Generally this is more of a problem with covered humbuckers, and more often than not it is caused by vibration of the cover itself. The easiest way to determine if this is the cause is to remove the cover. Typically there are two solder points which need to be de-soldered. If the microphonic condition goes away, you have four options. The first is to leave the cover off. This will affect the tone if the metal cover is magnetic, otherwise it will not. However, the cover does provide protection for the pickup and I'd advise leaving it, the pickup was designed to have a cover. Second is to have the pickup wax potted, this involves setting up a wax pot, and there is risk of damage to the pickup. Third is to apply a layer of silicoln inside the cover and seat the pickup in the cover before it dries making sure not to push it all out, but getting it up around the sides of the pickup. This is safe, easy and effective, but makes a mess of the pickup for future repair. (not a big concern IMO) The fourth option is to do a partial wax potting. Get some parafin from the grocery store. Boil a small pan of water then remove it from the heat. Place a chunk of wax in the cover press the wax into the holes to prevent water getting into the cover, and hold the cover on the surface of the water with a pair of tongs.As the wax softens spread it around and up the sides with a spoon. Resoften the wax until you can easily seat the pickup in the cover. This is much safer and easier than true wax potting.

The guitar itself features a resonant and solid American Alder body, maple neck and 2 x single-coil pickups with 1 x humbucker installed with a coil tap function for tonal variety. The guitar is comfortable to play and sounds great especially when you throw some distortion at it through an amplifier. The guitar is budget friendly and ideal for beginners and home recording enthusiasts thanks to its high build quality and comfortable playing experience.
Now we switch gears to a company called Unicord, which was owned by Sid Hack. At some point in the early ’60s (probably in around ’64), Unicord purchased the Amplifier Corporation of America (ACA) which was located in Westbury, New York, a northern suburb of New York City. ACA made Haynes guitar amplifiers and an early distortion device powered by batteries.
We've already heard the story of Muddy's rise from a Mississippi planation to a Chicago blues legend but that only took his career so far, at least in his chosen style of music. Eventually, bands that were influenced by Muddy like the Rolling Stones (named after one of his songs), Animals, Yardbirds, Cream and Hendrix became big, raising Muddy's profile but not getting him the same level of success his descendants were having. Marshall Chess, son of the president of the label who worked at the company had the idea to try something different by putting Muddy's music into a psychedelic setting to appeal to a younger audience. After discussing the project with Muddy, he went for it. He wasn't forced into it as some have been led to believe.
Where do you people get off not even mentioning BC Rich. They have a fine selection of Guitars, they use some of the best woods you can ask for, very good electronics, and Kerry King of Slayer fame will only play BC Rich, that in itself should be enough said. On top of that the body styles that they have to choose from is far more innovative and original than anything that Ibanez could ever dream of producing. Fender and Gibson are in fact the most well known guitars in the world but frankly the body styles are outdated and worn. They believe in staying with what works but wheres the originality? Im sorry if I offend but BC Rich til death. I have never seen anyone come up with anything as wild and as evil looking as the worlock models. I mean the nickname for a guitar is an axe but so far only BC Rich guitwrs look like somthing you can take into battle, and the sound is like the very voice of Satan himself. And shame on you all to forget about Dean Guitars, They were used and endorsed by the God of Metal shreddiing himself Dimebag Darrell Abbott. The man died on stage with one in his hands. RIP Brotger and Goddspeed. give repect where respect is due.
This product was not working and parts were defect. I don't know how some people made it works. The instruction was terrible and seller's wires description photos are more worse. I did not expect much for this little toy. Just piece of the junk. I was tried to return, but the seller said that I had to pay return shipping and he gave me a fake return shipping address.
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!
If you wanted to wire a 4 conductor Dimarzio or Seymour Duncan in this way, just look at the diagram. Solder the 2 "middle wires" together, tape the connection, then solder the outer wires to the output. Be very careful when working with 4 conductor wiring. The colors and polarity are very important. You could easily make a mistake and wire an "out-of-phase" arrangement which would have low output, a squawky, thin sound AND the humbucker would NOT be hum canceling.

Bass combo cabinets and speaker cabinets are typically cube- or rectangle shaped. However, some small- to mid-sized combo amp cabinets have a wedge shape, like a keyboard amp or a stage monitor speaker cabinet. The wedge shape, also called a "rock back" feature, enables a bassist to point their speakers up towards themselves, to make it easier to hear their sound.
When looking at acoustic pianos, there are so many variations that can lead to differences in tone: upright vs. grand, hammer types, mechanical condition, the player, mic choices, and mic techniques. No matter what, though, the piano tends to be a behemoth in the mix – for better or worse – so most often you'll be looking to cut holes out for other things in your mix.
Spruce has historically been the wood of choice for acoustic flat-top guitar soundboards. However, Luthiers and other large guitar manufacturers very often choose more economical and readily available woods rather than top-quality spruce. Redwoods and cedar, for instance, are often used in soundboards by American guitar-makers to great effect. In some cases, two different woods are used together to give the guitar a distinctive appearance and tone.
The Effect:These pedals keep the original clarity of your sound intact, depending on how you tune it, you can use a little bit of overdrive, that adds some grit to the signal, with higher tuning you can get relatively more aggressive overdrive sound that’s still tame and if you push your overdrive pedal to the limits you might get a similar sound to that of a distortion pedal’s lower settings. A good overdrive (like the Ibanez TS9 Tube Screamer) is an essential solution for those of you wanting sound enhancement with lower interference, while having the option to add some aggression in your sound, but without taking it to extreme degrees.

ASSEMBLE Now you can put it all together! By this time you'll be so excited you'll forget about the electronics and start to string in up before you get the electronics in but it's ok, we'll get there. Start with bolting on the neck in the same fasion that you did when you test fitted everything. Then follow that with the tuners, bridge and pickups. Don't forget to run the wiring for the pickups when you put them in.


One of the most useful features of guitar-amp simulation plug-ins is that they can help mask some quite serious problems with whatever you're putting through them, without necessarily changing it beyond all recognition. I've found that even relatively clean settings can disguise such horrors as clipping on transients to a surprising extent. If you're ever faced with a badly recorded guitar part (even one that's played on an acoustic guitar, or through an amp), try putting it through an amp modeller.

Billy Corgan chose the handcrafted LJ16 A.R.E. as the foundation for his signature model. A few sonic changes were made during design at Mr. Corgan’s request -- a slight emphasis on the upper-mid harmonic frequencies creating a better listening experience for the audience and a bit more detailing in the low-mid range to help round out the balance to complement his playing style. Other personalized Billy touches are brass bridge pins, TUSQ nut and saddle, GOTOH open-gear tuners and a unique “Zero” head stock logo.


During the first three decades of the 20th century, with the rising popularity of Hawaiian and big band music in America, guitar makers built larger-bodied instruments, using steel instead of gut strings, and metal instead of wood for the guitar body. Around 1925, John Dopyera designed a guitar with metal resonating cones built into the top that amplified the instrument’s sound. That suited twangy Hawaiian and blues music but not other genres. Then, in the 1920s, innovations in microphones and speakers, radio broadcasting, and the infant recording industry made electronic amplification for guitars possible. The volume was suddenly able to go up: way up.
Great for beginner guitar players, the electric guitar packages/electric guitar kits give you all the essential tools that’ll help you get started on your musical journey. These electric guitar packs typically include an electric guitar, a guitar amplifier, and various must-have guitar accessories including guitar picks,guitar straps, and an electric guitar gig bag.
×