While Gibson are the creators of the original J2000 jumbo-sized acoustics, the company’s reasonably priced sister company Epiphone do a range of acoustics which are perfect for players looking to dip their toes in the water. The Epiphone EJ2000 is identical in dimensions and appearance to its more costly sibling, yet offers the perfect entry guitar for budding rhythm players.

With a typical Strat single coil pickup and assuming an instrument cable capacitance of 500pF, 250K tone pot, 0.022uF cap, guitar plugged in to a 1Meg input, the range of the tone control is roughly from 6.0kHz -3dB (tone fully clockwise – with a resonant peak of +7.4dB at 3.9kHz) to 950Hz (tone fully anti-clockwise – with a resonant peak of +4.5dB at 594Hz). These figures vary from pickup to pickup and depending on the instrument cable capacitance.

While it is fun to kick your amp and make car-crash noises with your reverb unit, a much better use is to add depth and echo to your guitar signal. The effect is similar to playing your guitar in an empty room where the sound bounces off the walls. When you move on to digital reverb pedals you have the option of some truly lush, expansive sounds ranging classic spring reverb, to studio-style plate reverb, to hall and arena-type effects.
Mark Tremonti is well-known as an avid gearhead and first impressions of the MT 15 are of a purposeful, working player’s tool with no unnecessary bells or whistles. The MT 15 has clean and lead footswitchable preamp channels, with gain and master volume on the lead channel, and volume on the clean channel. Both channels have their own bass, mid and treble controls with a master presence control and a pull boost on the clean channel to add a mild overdriven edge. Around the back things are kept simple with a series effects loop plus a half-power switch which drops the MT 15 from 15 watts RMS down to around seven watts. At first glance there’s no channel indicator, however, when powered up all the MT 15’s valves are lit by LEDs which change colour: red for lead, blue for clean – very visible and very cool. The lead channel has no less than five gain stages and the amount of gain and distortion on tap is huge. However, it’s also been carefully sculpted into a stunning barrage of harmonic filth that flatters every note and power chord. Often, very high gain can easily descend into an unpleasant mush that’s perceived more as noise than music, yet the MT 15 manages to 
avoid this and retains exceptional clarity and articulation. The clean channel offers plenty of headroom to cater for any guitar, while pulling the channel mid-boost function adds a sweet vintage Fender overdrive with a medium-fast response that’s great for country picking or blues.
We considered more than 40 guitars for this guide, and we tested the 13 most promising models. A couple of models aside, our testing panel thought, as Lynn Shipley Sokolow put it, “These are all of good quality and are all adequate.” In fact, certain models we didn’t pick may be a better choice for beginning guitarists who are into a specific style—most notably metal, which is clearly the primary market for brands such as Ibanez and Jackson.
Launch price: $499 / £279 | Body: Laminated maple, semi-hollow | Neck: Mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: Alnico Classic humbucker (neck), Alnico Classic Plus humbucker (bridge) | Controls: Neck volume, bridge volume, neck tone, bridge tone, 3-way pickup selector | Hardware: LockTone Tune-O-Matic stopbar, Grover 18:1 tuners | Left-handed: No | Finish: Vintage Sunburst, Natural, Cherry, Ebony
The "Chrome Edition" harmonica is also based upon the MS reed plates. Featuring a crystal glass comb and specially engraved chrome-plated anniversary cover plates. The bottom cover plate has the serial numbers from 1 to 1857. It is also packaged with an anniversary booklet. The "Standard Edition" model features a clear acrylic comb and the top cover plate is specially engraved.
The first guitarist to chain effect pedals together, Hendrix combined their tones and textures with whammy bar squeals and growls and unorthodox playing techniques to make the guitar sound like a symphony, animals, armies or the far reaches of outer space. While most Sixties psychedelic music was banal bubblegum pop with fuzz-tone guitar hooks, Hendrix made music that actually sounded like a trip after ingesting a cocktail of LSD, mushrooms and THC.

yea seriously as the other reply said especially when it comes to Japan you can no longer just go with the American is better mantra. Tell that to all the amazing musicians who play top of the line regular or custom models from yamaha and Takamines. IMHO especially Takamines are on the cutting edge and even some of their cheaper guitars which are now made in china(the topshelf ones that are typically roughly $1200+ are Japanese made) . Your selling yourself short and also in many cases overpaying if you'll only look at American made. Not to mention many of the American companies even on the $30000+ models mix and match where their supplies come from and or where the labor/construction of the guitar takes place. Martin is one of only American companies that does everything in America but they are an increasingly overpriced guitar. I love any old Martin I touch at a yard sale or older family members house but I'm totally underwhelmed by the newest ones I try at guitar center.

The EB-18 was the first electric bass the Martin company produced in 1979. The single-pickup EB-18 was a partner to Martin’s E-series electric guitars. Its scroll-shaped headstock was reminiscent of the Stauffer-style pegheads of early Martins. The EB-28 was added to the line a year later. It had a mahogany body and PJ pickups. Both models were discontinued in 1983.
This is because you won’t have to go through all the hassle of doing research on pickups, then finding a way to mount them without damaging your guitar. While magnetic pickups are surely quite easy to install, contact pickups or blended systems with microphones and preamps might require removing the top, drilling, using all sorts of screws and plates, etc.
Many of the Cordobas, such as the C7, come with a gig bag or case, which makes it easier to keep your guitar in great condition, especially if you purchase a humidifier block. If you head over to the Amazon listing for this guitar, you might see that the reviews are the same for this guitar as they are for another Cordoba instrument, so there really isn’t much extra information, unfortunately.​
My granddaughter really liked this book. I know it was used but the CD and the wall chart were missing. I wish that would have been noted in the comments. Some of the other book sellers noted that one or the other of these were missing so I didn't order from them. Nothing was noted in the comments on this. My granddaughter was happy with the book and wanted to keep it.
Having humbucker pickups (sometimes just a neck pickup) and usually strung heavlly, jazzboxes are noted for their warm, rich tone. A variation with single-coil pickups, and sometimes with a Bigsby tremolo, has long been popular in country and rockabilly; it has a distinctly more twangy, biting tone than the classic jazzbox. The term archtop refers to a method of construction subtly different from the typical acoustic (or "folk" or "western" or "steel-string" guitar): the top is formed from a moderately thick (1 inch (2.5 cm)) piece of wood, which is then carved into a thin (0.1 inches (0.25 cm)) domed shape, whereas conventional acoustic guitars have a thin, flat top.
Many musical instruments are works of art, so it’s little doubt that design is very important to a lot of people. Make sure that you really like the way a guitar looks before purchase, because you might be playing it for years. This is one of the reasons the more natural wood colored guitars are always popular - they don’t go out of style or look out of place.
Then, one weekend his combo got the biggest gig of its career – opening for Tommy Dorsey and his orchestra. Charlie was hot that night, and Dorsey took notice. In one of those rare coincidences, Dorsey’s guitar player had just quit, and the next day Kaman was offered the job. Which path does the son of a construction foreman pursue? The uncertain, fleeting glory of the entertainment industry, or the unknown possibilities of putting craft in the air?

One of the newer brands on this list, Jackson Guitars was established in Glendora, California in 1980. However they’ve made a huge impact to the world of metal, and their guitars are used by some of the biggest names – Randy Rhoads, Adrian Smith, and David Ellefson to name a few. Some of their most famous models include the Soloist, and the Rhoads.
Other artists, such as George Benson, John Lennon, and the world renowned B.B. King would use the instrument to its fullest capability to produce a clean, bright, woody tone reminiscent of fully hollow guitars, while being able to provide the volume levels to perform in much larger concert halls without the inherent issues known with fully hollow body guitars.
We took another detailed look at all acoustic-electric guitars priced under $500 available from major American online retailers, and for this update, we shortlisted 78 of them for closer analysis. We then collated over 7700 ratings and reviews from forums, videos, retailers, blogs and major music gear publications and processed those data with the Gearank Algorithm to produce a Gearank score of out 100 for each guitar. Finally we selected the highest rated guitars in two of the most popular price brackets, sub $300 and sub $500. For more information about this process see How Gearank Works.
It doesn't even seem to matter which kind of Guitar amp you have or when plugged into any PA system. This guitar is a keeper. it comes with Godin Nickel Strings which is why unplugged it may sound too tinny to some ears, but after changing to Elixer Acoustic Strings, it sounds much better unplugged and really shows off plugged in. It now can give my Acoustic six strings a real run for my attention. At gigs and open mics, people come up and ask,,,what the Heck is this Bruce? Looks and sounds amazing. My only wish is that it had the same Pick-up system as on my A6 Ultra, two separate Pick Ups and Controls and two 1/4 in outputs.

After I published that blog post, a number of beginners wrote to tell me they had a higher budget and would actually like me to recommend some better beginner guitars than those you typically find in starter packs. When I dug deeper, most told me they had a max budget of about $300 for the guitar alone, and weren’t interested in all-in-one starter packs. They wanted a really great (but affordable) guitar and wanted to shop for amps and accessories separately. I further confirmed this with a little informal poll on Twitter:

Each option has a unique tonal quality, some may not seem all that useful in some situations.  2 adjacent pickups that are out of phase, can sound very tinny and weak but often cut through better in the mix as they occupy a different placement in the spectrum.  Consider Brian May's (Queen) tone as some of his selections rely on 2 single coil pickups being out of phase
Clipping is a non-linear process that produces frequencies not originally present in the audio signal. These frequencies can be harmonic overtones, meaning they are whole number multiples of one of the signal's original frequencies, or "inharmonic", resulting from general intermodulation distortion.[34][35][36] The same nonlinear device will produce both types of distortion, depending on the input signal. Intermodulation occurs whenever the input frequencies are not already harmonically related. For instance, playing a power chord through distortion results in intermodulation that produces new subharmonics.

I believe that the best electric guitar amp for beginners is a straightforward combo amp, represented by the amps on this list. Avoid the bells and whistles of the fancier, feature-rich combo amps until you’re confident you have a solid set of playing chops. Then you can either move up to a modeling amp, or start adding effects pedals to your rig. The great thing about all the amps profiled above is that they provide a solid base for what ever effects you want to add to the mix later on down the road.
The output transformer sits between the power valves and the speaker, serving to match impedance. When a transformer's ferromagnetic core becomes electromagnetically saturated a loss of inductance takes place, since the back E.M.F. is reliant on a change in flux in the core. As the core reaches saturation,the flux levels off and cannot increase any further. With no change in flux there is no back E.M.F. and hence no reflected impedance. The transformer and valve combination then generate large 3rd order harmonics. So long as the core does not go into saturation, the valves will clip naturally as they drop the available voltage across them. In single ended systems the output harmonics will be largely even ordered due to the valve's relatively non linear characteristics at large signal swings. This is only true however if the magnetic core does NOT saturate.[45]

Either way, the results in the Descent Reverb are nothing short of phenomenal.  If you watch the demo video below, you'll hear some of the most unique sounds capable of being produced by a guitar pedal. Pigtronix did something similar with delay and pitch shifting in the Echolution 2 Ultra Pro, but we think the combination is even better in the Descent.
If you are inexperienced, it is only recommended that you attempt to setup a guitar that is of little value to you, both financially and sentimentally. If you don’t have one that fits these requirements, then it is best to pay the cost of a guitar setup as performed by a professional. The primary risk while setting up the instrument is over adjustment. Working any part of the bridge too much will cause wear and tear, and irreparable damage to the neck is often the result of improperly adjusting the truss rod. It is always hard to justify ruining a perfectly good instrument in order to avoid guitar setup cost.

Late 1938: Scalloped "X" bracing with "rear shifted bracing", where position of the "X" moved further than one inch from soundhole (exact measurement varies, for example: a 1941 D-18 has 1 7/8" distance). So the X-braces were moved about 7/8" further down. And the tone bars were angled more parallel with the length of the guitar and further apart. These late-1938 to late-1944 guitars had deeper scalloped braces than the 1938 and prior forward or advanced braced guitars. This gives the late 1938 to late 1944 Martin guitars improved bass response (don't let anyone tell you that war-time Martins are not as good as pre-1939 Martins!)
At this point you should have the pots, switch, and jack out of the guitar with the pickup wires still connected. You can either de-solder the pickup wires or use wire cutters to clip them off. If you’re replacing the pickups as part of your re-wiring, you can do this now (I did not in the example photographed here). Just feed the leads of the new pickups back through the holes in the pickup cavities.
Without some kind of amplification, it would of course be possible to “hear” what you’re doing. That is something very different from never hearing what a particular electric guitar sounds like when amplified. In that case get an electric with a soundboard such as an archtop or ask yourself “why would I not amplify a device meant to be amplified through the guitar pickups?”
Guitar Center Repairs is your go-to spot for expert stringed instrument repairs, upgrades and servicing. Located inside every Guitar Center store, our staff of experienced, certified technicians will keep your guitar or other stringed instrument in peak playing condition and help you get the most out of your investment. We also repair and modify other equipment like effects pedals, amps and more at select locations. Set up an appointment or stop by any Guitar Center today.
A direct user interface can give far more musically rewarding results than dozens of parameters, menus and alpha dials. Often, even a panel of knobs isn't anywhere near as natural to play as, say, a Korg Kaoss Pad. Here's something Kaoss Pad 3 owners can try at home: choose effect DL2 (Smooth Delay) in which the pad controls delay time on the X-axis and depth on the Y-axis. Next route your favourite solo patch through it and set the FX depth to about 12 o'clock. Solo wildly whilst simultaneously stroking the top right-hand corner of the Kaoss Pad with short, circular motions. With practice, you should be able to produce delicate pitch sweeps as the delay shifts in time. As you control depth by vertical motion, practise diagonal upwards sweeps followed by vertical downward ones to smoothly dampen the effect. Hey, it takes years to master the violin, so a few evenings spent waggling your finger over flashing LEDs shouldn't be too arduous. Next try the same technique with lush solo pads: simple yet devastatingly effective! Paul Nagle
Boss is an effects legend, but thanks to the digital expertise of parent company Roland, the brand now also has an amp that promises organic, valve-like tones at an impressively low price. It does this by using the same Tube Logic technology employed in last year’s 150-watt Waza Craft head, and other Roland amps. The K100 doesn’t invite direct comparison with specific amp brands and models. Instead, there are five generic voices: Acoustic, Clean, Crunch, Lead and Brown. You can pre-load 15 different effects types into the amp, with 55 to currently choose from when you link the Katana to the Boss Tone Studio application. The Katana may look plain, but its tones are truly exceptional. The Crunch voice is responsive and dynamic, while the Brown solo sound is as good as many USA valve-powered competitors. Start using the Tone Studio editor and the Katana’s edge becomes sharper still, with different effects chain presets and assignable control parameters.
“You can also think of it as what the signal path in a studio situation would be if you were to plug your guitar directly into the input of your amplifier, and process that sound through outboard effects. You’re not going to have your echo first before going into your distortion boxes—unless you’re looking for a specific sound—because you want the echoes to die out naturally, and not with your distorted sound.”
Guitar FX BOX is acting just like a good collection of analog effect pedals. Just plug your guitar into the sound card input and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice, and other inputs real-time - I/O delay is really low, almost undetectable. This is achieved using DirectSound, WDM streaming or ASIO for fast access to the sound card hardware and special DSP algorithms optimized for real-time processing. Besides high sound quality, Guitar FX BOX features intuitive user interface, supports presets and hot keys for quick presets changing, MIDI/Game controllers pedals, configurable tuner, metronome, file input/output. Currently included effects: Overdrive/distortion, Amp&Speaker cabinet simulator, Echo, Pitch shifter, Reverb, Wah-Wah, Chorus, Tremolo, I/O Equalizers, Dynamic compressor, Phaser and Volume swell.

The combination of Slash’s rough-edged pyrotechnic solos and Izzy’s raw power chords and off-kilter rhythms resulted in an unusual mish-mash with massive crossover appeal that metalheads, punks, glam poseurs, pop fans and classic rockers loved alike. Slash and Izzy also made vintage guitars cool again, strapping on Gibson Les Pauls, Telecasters and ES-175 hollowbodies when most guitarists were playing DayGlo superstrats, pointy metal weapons or minimalist headstock-less Stein-bortions.
 Alibaba.com offers 50 german guitars brands products. About 34% of these are guitar, 30% are wood router, and 6% are other musical instruments & accessories.   A wide variety of german guitars brands options are available to you, such as free samples.   There are 50 german guitars brands suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of german guitars brands respectively.   German guitars brands products are most popular in Western Europe, North America, and South America.   You can ensure product safety by selecting from certified suppliers, including 22 with ISO9001, 4 with BSCI, and 2 with FSC certification. 

Why We Liked It - Guitarists often have a love hate relationship with signature models, but we really think that the SE Angelus is a worthy addition to our rundown of the ten best electric acoustics you can buy right now. It’s a good price, offers some great design and hardware, and of course comes with the seal of approval from one of rock’s most accomplished guitarists.
Unlike many of the other pedals, which are designed to create dramatic or exciting effects, these units take care of the less glamorous (but still very important) jobs in creating your tone. Sound-conditioning effects are the ones that will give the finishing touches to your sound, making the difference between “amateur garage band” and “international touring guitarist.”
It should also be mentioned, that LX does not just stand for U.S. made. Originally LX was an indicator for an Ovation guitar that included several new features that were not available on previous guitar models. Back in 2007 Ovation explained on its website, that the new features included the new OP-Preamp, an advanced neck system (lightweight dual-action truss rod, carbon fibre stabilizers), a patented pick-up (made of 6 elements), inlaid epaulets, scalloped bracing as well as a new hard composite Lyrachord GS body.[25] Back then, no such thing as an AX model line existed (the first AX models appeared on the Ovation-website in 2010). Based on the website’s history the LX features must have been introduced in 2004.

It was late 1969 early 1970. I was 13 years old and had been learning guitar for about a year when I was given what I considered to be the key to a world of freedom. Mum & Dad said it was ok for me to setup my room in a shed inside Dad’s garage. The shed was the size of a small bedroom, about eight by ten in the old measurements. It was originally built from scraps of recycled building material from a 100 year old house and was initially used as a tool shed.

1. Examples. There are a handful of examples in this book and that's about it. I expected much more in the way of alternate wiring examples but they were only mentioned in passing it seems. Additionally if you're looking for good step by step instructions you wont find it here. The instructions are average at best and never really go deeper than "put this wire here and that wire there" . It's step by step,but just barely. Don't expect any deep explanations on the theory behind why certain wirings do what they do or why they sound the way they do. It's cursory at best.
The guitar output jack typically provides a monaural signal. Many guitars with active electronics use a jack with an extra contact normally used for stereo. These guitars use the extra contact to break the ground connection to the on-board battery to preserve battery life when the guitar is unplugged. These guitars require a mono plug to close the internal switch and connect the battery to ground. Standard guitar cables use a high-impedance 1⁄4 inch (6.35 mm) mono plug. These have a tip and sleeve configuration referred to as a TS phone connector. The voltage is usually around 1 to 9 millivolts.
The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
Next up is another electric guitar from Fender Standard, namely the American Special Telecaster. This one has two Texas Special Tele pickups and it’s perfect for great American genres like country, rock and blues. This American Special Telecaster has a lovely alder body and the neck is maple. Just like number one on our list, the 50’s Stratocaster, it’s vintage-looking, but the Vintage Blonde model we’re reviewing looks vintage in a cooler, less sentimental way.
Fishman is the main brand that you’ll see manufacturing the electrics, but lots of the bigger guitar brands will also have their own in house products. Higher end guitars are more likely to have specialist or boutique equipment which is generally considered to be better. Gibson using LR Baggs pickups systems is one such example. You can also opt for aftermarket pickups.
Nice and great are just two of the many positive adjectives that people use to describe the Ibanez AEG12II-NT. And most of these satisfied users are pleased with its playability, describing it as a truly inspiring and fun instrument. Its visual appeal and sound quality are also commended often, some even coming from experienced players who compare it to more expensive acoustic-electric guitars.
If you want to measure the fret size on existing instruments, a good way to do it is to get an inexpensive dial caliper (think Harbor Freight etc).  You can measure the width with the outer jaws (make sure to zero out the calipers for accurate measurements), but for the height (unless you are going to notch the depth rod and subtract the difference), use a piece of something of a uniform thickness and drill a hole in it to accomodate the depth rod, place it across two frets and measure thru the hole (usually near the crown) to the fingerboard and subtract your piece's thickness.  When measuring fret height, it is always good to measure a few different places on the neck as the height may vary according to leveling and wear. On many guitars (but not all) the upper frets (if there is not a neck joint area hump that was accounting for during leveling) will be a good indicator of fret height.
• What they’re made of: Frets are typically made of nickel-silver or nickel-steel alloys, or – less often – brass, copper alloy or stainless steel. The harder and more dense the material, with stainless at the top of the scale and soft nickel at the bottom, the brighter and more cutting the notes played on a guitar should sound. Most manufacturers use nickel alloys because the metal is soft and easy to work with. At this point, most guitarists’ ears have been developed to the sound of nickel as well, and most guitar buyers have a tendency to balk at the unfamiliar when shopping for instruments.
When considering the guitar from a historical perspective, the musical instrument used is as important as the musical language and style of the particular period. As an example: It is impossible to play a historically informed de Visee or Corbetta (baroque guitarist-composers) on a modern classical guitar. The reason is that the baroque guitar used courses, which are two strings close together (in unison), that are plucked together. This gives baroque guitars an unmistakable sound characteristic and tonal texture that is an integral part of an interpretation. Additionally the sound aesthetic of the baroque guitar (with its strong overtone presence) is very different from modern classical type guitars, as is shown below.
Referring to this setup, Leckie also explains more about what makes double-miking so powerful: "If you brighten up the U67, it's totally different to brightening up the SM58, so sometimes I'll add a little brightness to the 67 and a little compression. But between that combination, I find I can get pretty much everything I need. They're rarely used at equal level; sometimes I'll favour the SM58 with the U67 at 10-15dB down. Even 20-30dB down, just bringing it in, it's amazing the different colour you get — how much the tone of the guitar changes."

Vibrato design is slightly changed and enhanced with the addition of block saddles for adding a fair amount of firmness to the tone. Likewise, they also give a precise breakpoint for the strings. Talking about pickups, pac 112v is equipped with 5-way blade pickup selector. Similarly, master tone and volume controls are also provided for the neatest output.

Jump up ^ DeCurtis, Anthony (1992). Present Tense: Rock & Roll and Culture (4. print. ed.). Durham, N.C.: Duke University Press. ISBN 0-8223-1265-4. His first venture, the Phillips label, issued only one known release, and it was one of the loudest, most overdriven, and distorted guitar stomps ever recorded, "Boogie in the Park" by Memphis one-man-band Joe Hill Louis, who cranked his guitar while sitting and banging at a rudimentary drum kit.
Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.
The pre-1945 braces have a scooped or "scalloped" profile, making them lighter in design and weight. Functionally this means a greater vibrating surface (the guitar's top), and provides stronger bass response. Why did the Martin Company change from the lighter scalloped braces to heavier braces? The answer is in the strings. Many guitarists of that time were using heavier gauge strings, and these heavier strings were tough on the lightly constructed scalloped-braced Martins (especially on D-models with the long 25.4" scale). Martin didn't make a heavier guitar to withstand the extra string tension, so they compensated by adding more rigid (non-scalloped) braces to the guitar's top.
The earliest sound effects were strictly studio productions. In the mid to late 1940s, recording engineers and experimental musicians such as Les Paul began manipulating reel-to-reel recording tape to create echo effects and unusual, futuristic sounds. Microphone placement ("miking") techniques were used in spaces with specially designed acoustic properties to simulate echo chambers.[22][23][24] In 1948 DeArmond released the Trem-Trol, the first commercially available stand-alone effects unit. This device produced a tremolo by passing an instrument's electrical signal through a water-based electrolytic fluid.[25] Most stand-alone effects of the 1950s and early 60s such as the Gibson GA-VI vibrato unit and the Fender reverb box, were expensive and impractical, requiring bulky transformers and high voltages. The original stand-alone units were not especially in-demand as many effects came built into amplifiers. The first popular stand-alone was the 1958 Watkins Copicat, a relatively portable tape echo effect made famous by the British band, The Shadows.[26][27]

The roots of effects pedal usage can be traced back to early into the history of the electric guitar, but two people immediately come to mind who really pushed its usage out there:  Roger Mayer and Jimi Hendrix.  We’ve come a long way since those early days and it’s easy to be overwhelmed by the insane amount of options out there.  From good old standbys to newer boutique options, it can be a chore to know what effects pedals could be right for you.

The Fender T Bucket is a great choice for beginner guitarists looking for a great sounding entry level acoustic. It is frequently the top choice for new guitarists looking for a an affordable acoustic guitar. Many owners site it’s ease of playability as one of its greatest attributes. It is available in 3 different color combinations: 3-Color Sunburst, Moonlight Burst, and Trans Cherry Burst. It is made of maple wood. It has a preamp installed, making it an acoustic electric. It is our top pick for the best acoustic electric under $500. It is a great choice for beginners.
Fender’s MIM (Made in Mexico) Stratocasters are offered as an affordable option, buyable at about half the rates of their American siblings. Moreover, you can also select your preferred one from among the maple and rosewood fingerboards, SSS or HSS pickup configuration, and color variations. You can also find several models available with Floyd Rose tremolo and pretty tops. For those requiring American Fenders, the American Original Series is available with all essential features.
Overdrive originally resulted from the natural breakup that occurred when a tube amp received an overly hot signal from a guitar. This pushed the tubes to deliver a subtle, warm breakup. Generally overdrive is a more subdued, natural form of distortion. While you don’t have to use an overdrive effect with a tube amp to get a great sound, the combination of the two can produce a rich, pleasing tone that many guitarists prefer. The first overdrive effects were designed to push more signal into a tube amp, giving it the very throaty, mid-range tone associated with Stevie Ray Vaughan. With that in mind, many of today's pedal makers have created circuitry to add that desired tone when used with a solid state amps as well. Since overdrive is a signal boost, adjustments from your volume knob will create a variety of different sounds.
when I started playing, if you wanted distortion, you "cranked up" the volume on the guitar and the amp. my old Gibson amp had reverb and tremolo. I used to play without reverb or tremolo. nowadays, in my old age, I use a little reverb for flavoring. I have pedals, but it's too much hassle to set everything up. so, I just plug into the amp with a little reverb. I'm happy and that's all that really counts. isn't it ?

Finally, we come to our time-based (and space-based) effects group. This includes reverb and delay. Both are forms of the same effect with reverb being a much faster version of delay. All they do is take the input and "smear it out" while reducing the volume over time. Not only does this create an extremely complicated signal that other effects won't react to well, but the variances in volumes these create would further confuse the previous pedals.
A 100-watt stack is overkill if you live in an apartment and need an amp only for home recording. Conversely, a 10-watt combo is woefully inadequate if you play in a band with a drummer named Thunder Fist. Choose an amp that’s right for your primary application. You’ll need at least 30 watts for playing live with a rock band, but smaller amps often provide surprisingly huge sounds in the studio—just ask Jimmy Page. Also, as a rule of thumb, if you're playing out often, you might want to shoot for at least 15 watts of tube tone.
A guitarist’s or bassist’s effects chain can largely determine the uniqueness of that player’s tone. Perhaps the most common effects pedal is a distortion or overdrive pedal, which either provides a distorting effect or overdrives the guitar’s signal into the amplifier—a tone that is highly popular in many genres of music. Other popular effects pedals include a wah-wah pedal (designed for sweeping a guitar’s tone control), fuzz, delay, flanger, phaser, reverb, chorus, compression, looping and boost. Many guitarists also use an EQ pedal to further shape and customize their sound. With all the brands and effects available at Guitar Center, your effects pedal options are virtually endless.
Back in the 1930s jazz and big-band guitarists began to make the switch to electric guitars in order to compete with the volume of other instruments onstage. Early electric instruments were hollow-body guitars. They were big, and featured an arched top that helped with power and projection. They had f-holes to facilitate amplification acoustically, and the first rudimentary pickups that allowed the guitar to be plugged into an external amplification system.
Kasuga produced their own house brand in Kasuga guitars. For a brief period of time the company produced Yamaha acoustic guitars. Kasuga guitars were first sold in America in 1972. Unlike many Japanese manufacturers who outsourced their guitar production in other factories outside the main maker, Kasuga produced all their products in-house. Badged guitars known to have been made by Kasuga include Conrad, Emperador, ES-S, Ganson, Heerby, Hondo, Mei Mei and Roland. Kasuga went out of business in 1996.
Featuring a sound engine derived from the bigger, premium-priced GT-100, the GT-1 contains 99 preset and 99 user patches each built from a chain of blocks that can draw from 108 effects, including 27 amp/speaker sims and a 32-second looper. The first two footswitches scroll through patches, while the third (CTL1) footswitch is used to turn an effect, or a combination of effects, on and off in a patch, or for tap tempo. Sonically, there's some great stuff here. Many of the presets are playable straight off the bat, but the wide range of effects means that you can get really creative with your own patches. As you'd expect from Boss, the modulation effects are a highlight, as well as the delays and reverbs, particularly the Tera Echo. We've heard better pitch-shifting though... While the COSM amp sims will give you an approximation of the real thing for recording, at this price, you don't get the playability and detail of high-end modelers. Likewise, the overdrives and distortions work really well when building a patch but, used as solo effects, have less of the impact of real analogue pedals. The acoustic guitar simulator is class, though. For live use, the GT-1 doesn't have the flexibility of bigger units where you can switch individual effects, although you could get 
by in a live situation with careful sequential use of your own patches and the CTL1 button.

The Dean Vendetta pack offers a sharp looking metallic red super Stratocaster style guitar with dual humbuckers, a tremolo bridge for fun dive tricks, and a 24 fret neck. This is perfect for players that want to start learning lead guitar as soon as possible. The neck is quite fast for a guitar in its price range. Also included with the purchase is a 10-watt practice amp, gig bag, instrument cable, picks, a tuner, and a fairly comfortable strap.
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use a worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.[18]