The electric bass was invented in the 1930s, but the instrument did not sell well until Leo Fender developed the Precision Bass in the 1950s. As such, the type of bass players who first began trying methods to make their instruments louder with amplifiers and speakers were upright bass players. While the upright bass is a large instrument, standing about six feet tall (with its endpin extended), due to its low register, it is not a loud instrument when played acoustically. This is largely a result of the decreased sensitivity of human hearing, which is most sensitive to mid-range tones; equal perceived loudness for a mid-range sound and a low frequency sound requires much more acoustic power in the low-frequency sound. In the 1890s and early 1900s, upright bass players performing in bars and brothels in an era before amplifiers and speakers were available, particularly those who performed in bands with louder instruments such as trumpet, often found it hard to be heard. About the only solution available in the pre-amplifiers era was playing slap bass, a style of slapping the strings against the fingerboard to make a relatively loud percussive sound. Beginning in the 1920s, the first amplifiers and speakers designed for gigging musicians became available.
Real quick, I'm assuming you're talking production quitars here, not boutique or full on custom rigs. In that arena, one stands above all others... Gibson. While I was working at strings and things I was shocked at the way guitars were coming in from the factories... Completely not at all set up, some appears to have barely bothers to install strings. It was up to us to set them up to a kennel we felt appropriate, and I'm talking good guitars here, including the brands I play. And then came Gibson. Out of the box they are set up as prefect as can be without being personalized their final fit and finish is unparalleled, I'm sure their final inspection are all former Marine drill instructors and in need of therapy and on top of the physical aspects, at the bitter end they get handed to a guitar player, and some damn good ones by the way, to see if they make muster in playability and tone. It was rare to have one come out of its shipping box that wasn't nearly perfectly tuned. Hats off gents they just don't do it like that anymore ya know. Anyhow, the best one is gonna wind up being the one you like the best at least until you get old like me and start to appreciate somebody find things the right way instead of the fast/more profitable/ whatever else way. A little pride in your work late forever, especially in a disposable society such as this one...
When recording an electric guitar, the amp is the instrument as far as the mic is concerned, and mic position is important. While a lot of sound comes direct from the speakers as you'd expect, a significant level is also emitted from the back and sides of the box via panel vibrations. Also, an open-backed cabinet throws about as much sound out of the back of the box as it does out of the front. Choosing a mic for recording electric guitar isn't difficult, as virtually any decent mic of any type can be made to produce usable results. If I were to generalise, I'd say that British recording engineers tend to use cardioid, dynamic models while American engineers seem to prefer capacitor microphones. The dynamic mic produces a solid sound with a smooth high end, while the capacitor mic's increased definition produces a brighter, more open sound when used in the same way. However, the mic position has just as much bearing on the tone as the mic itself.
To me, the best practice amp hands down is the Yamaha THR10, and I have had them all. It just blows everything else away. But, it is $300 for an amp smaller than a toaster. Don't let the size fool you though, it is a killer amp. After the Yamaha, the Blackstar ID: Core series is my favorite. The ID: Core 20 or 40 is a great amp. The Yamaha and Blackstar ID: Core are both stereo for your aux input. To me this is a big deal. Many beginners are going to be playing along with backing tracks and songs, these stereo amps are awesome music playback tone. After those two amps, the Fender Mustang, Peavey Vypyr and Line 6 Spider are all about the same to me.
Planning for this review started right after the January 2018 National Association of Music Merchants (NAMM) show in Anaheim, California. We didn’t notice any significant introductions in the under-$200 electric guitar category during our time there, but new guitars can appear at any time. We’ll be watching out for them, and we’ll get our hands on them as soon as we can.
Many arguments can be made for Peej’s gifted lead guitarist (and corn-dogging, cheese-mongering Stevie Ray Vaughan acolyte) Mike McCready, but it’s Gossard whose songwriting and toothsome licks propelled the Seattle grunge icons early, record-setting releases. The winsome chords of both “Daughter” and “Black,” the white-knuckle smash of “Animal” or “Deep” or “Do the Evolution” — all were anchored by Gossard, a quiet type more invested in classic-rock craft than classic-rock showmanship.
So just to throw this out there- I've been trying to figure out how to set up electric guitars on my own for years and could never get it remotely figured out. At about 11:30 pm last night I decided to take a garbage fret buzzing machine of a guitar and try again. Your blog is the first time I've comprehended and successfully set up a guitar!! I'd buy you a six pack if you were in the neighborhood!

B.C. Rich manufactured a ten-string six-course electric guitar, the Bich, whose radical shape positioned the machine heads for the four secondary strings onto the body, avoiding the head-heaviness of many electric twelve-string guitars. However, many players bought it for the body shape or electrics and simply removed the extra strings. The company recognized this and released six-string models of the Bich, a shape now generally incorporated into their standard Warlock.

I've used 3 effects applications till now: Amplitube podfarm and guitar rig 5. The best software I found so far is guitar rig the sound it gives is amazing it has some pretty good presets and it has an intuitive interface I recommend trying out demos of every software to see which better suits you. I recommend guitar rig. I would suggest using a PC instead of a laptop because they're processor intensive. Anything that's part of the is series is great (i3 i5 i7). Good luck and remember to get asio4all drivers google it and get the newest drivers

Octave ('Other' category): This effect really surprised me because it tracks well, but inserting the compressor before the Octave plug-in improves the tracking even further. Distorting the post‑octave sound with the AmpSimulator gives a big distortion sound, even with only the Octave 1 level turned up. If you want more of a brontosaurus guitar, turn up Octave 2 as well. In general, I like to leave a fair amount of direct sound in the output mix. You can just as easily go in a cleaner direction by using only the Octave 1 output, and bypassing the AmpSimulator. Select the neck pickup on your guitar, pull back a bit on the tone, and you'll hear a sound that recalls jazz great Wes Montgomery.
For those other performances, we run into limits of computer memory, computer processing power and computer programmers' time (and talent). With increasing processing power available in the consumer market, simulations are in some cases surpassing storage intensive sample libraries in terms of acoustic similarity and perceptive preferences. In guitar world, though, there seem to be no VST players of the simulation variety contending for top honors against leading sample libraries - of which seems to be the leading collection (unless you like something Vienna Symphonic Libraries has to offer)
Primarily, people also use Mahogany wood to construct the guitar neck. Since it’s able to prevent the neck from warping, you’ll never have to worry about any impact that can deteriorate the quality of sound. Furthermore, the body ends up with a spruce top. In comparison with cedar, spruce is much brighter and provides better echoes through the instrument.
This is an American Fender Telecaster electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jangly indie sounds or clean country sounds but can be very rocky with more distortion added. This guitar is also a classic that has been used in alot of types of music.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: multi effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"multi effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: multi effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: multi effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}

What is an Essex? Also who compiled this list? It definitely wasn't guitar professionals. Every guitar maker has top line and then entry level guitars. Top line for those that can play and entry for the beginner who 9 out of 10 stop playing and they don't care that a $60 to $200 mistake lays in the closet for years. Yamaha makes 100's of styles and a lot are great guitars and some stink. It goes with the territory in a very competitive market. This should have been better defined and broken down by cost levels. Because this could have even been titled "The 10 Best Guitar List"
Stimson’s basic pickup design was used on most of National Dobro’s subsequent electrics, however, by around 1935 or so, when Supro arrived on the scene, the pickup had been modified to have a single coil wrapped around the two bar poles. Nevertheless, virtually all of National Dobro/Valco pickups were evolutionary descendents of this Stimson pickup.
Pre-delay on the reverb can help separate it out from the source sound. If your reverb has no controls for pre-delay, you can simulate this using a simple delay on an aux track before the reverb. Decay Settings: Choosing the most appropriate reverb treatment for a song can be surprisingly difficult, especially if you have hundreds of presets to choose from. So, instead of regarding reverb like the glue that holds the mix together, try adjusting its parameters (and in particular the decay time) while listening to the reverb return by itself. If the decay time is too long you'll hear a continuous mush of sound; if it's too short you'll scarcely hear it unless its level is turned right up. Somewhere in the middle you should find a setting that adds rhythmic interest to your song, without overpowering it, making the reverb work for its keep. This is also a useful technique when using several reverbs in a song, to make sure they complement each other. Martin Walker

The Triple Crown TC-50 is a three-channel amp, with independent preamps covering clean, low-gain and high-gain ranges. The front panel packs three identical sets of controls including gain, master volume, bass, mid, treble and presence, together with a two-way toggle switch that changes the channel gain and voice. There’s a small toggle switch for manual channel changing, and a pair of master output level controls, one of which is footswitchable. The feature-rich rear panel includes Mesa’s exceptional CabClone speaker-emulated output, with a balanced XLR, headphones socket and line out. The TC-50 also benefits from a footswitchable effects loop, separate reverb level controls for each channel, and MIDI switching for all the major functions. The Triple Crown’s clean channel is highly versatile, going from butter-sweet clarity through to edgy blues soloing, with a lot of control over that ‘just on the edge’ sweet spot. The Lo Gain channel is where the TC-50’s crunch and classic rock tones live, with a multi-layered overdrive and harmonic overtones that shift with varying degrees of pick attack. Flipping the toggle switch into Drive mode adds a subtle midrange bump, invoking JCM800-approved snarl and a dose of extra gain. The Hi Gain channel adds more of the same - lots more, so much so that in the upper reaches we think this is probably the most gain ever from a Mesa amp. No doubt about it, the Triple Crown has three channels packed full of world-class tone that only a handful of amps can compete with.
Meaning of electronic: (of a device) having or operating with the aid of many small components, especially microchips and transistors, that control and direct an electric current. or (of a device) having or operating with the aid of many small components, especially microchips and transistors, that control and direct an electric current. Example is “electronic calculator”.
Before deciding on how to go about mic’ing the amp, listen to the sound in the room. If the guitar is being recorded as part of a rhythm track in the same room as drums and other instruments, the only option may be to use a close-mic’ing technique, unless you don’t mind dealing with the other instruments bleeding into the guitar track. Recording guitars in isolation, as an overdub, presents more options for ambient room mic’ing. Experiment with mic positioning to achieve the right amount of room sound and the desired bass and treble response. Distance-mic’ing in a very live-sounding room can create an appealing slapback echo-type sound, while close mic’ing gives you absolute flexibility in the mix.   
Next to the great sounds and looks, the most noticeable thing about Seagull guitars is the incredibly reasonable prices. With Seagull, you get a quality guitar made from superior woods and materials for a lot less than it seems like it ought to cost. The Performer CW Flame Maple is definitely one of the best acoustic-electric guitars under $1000 out there.
Collings Guitars is an Austin, Texas based stringed instrument manufacturer. The company was founded in 1973 by Bill Collings who is “one of the most recognized and respected names amongst aficionados of modern acoustic instruments.”[ Their acoustic guitars have been highly regarded for decades.[2]In addition to acoustic guitars they also make electric guitars, archtop guitars,mandolins, and ukuleles.
Thanks for the list. Michael Gurian was a luthier in NYC who began as a classical guitar maker then began making steel string instuments in the 1960’s , I remember seeing his instruments shortly after i bought My first Martin in the dog years of the 70’s along wi Don Gallaghers instruments. Recently acquired one of his jumbos in Brazilian rosewood made in 1971 still in remarkable condition. He was among the first to compete as luthier with the big boys at Martin and gibson , even before Bob taylor jumped in.
It will take time to write and update all of the content at once. Come back regularly and I promise that there will be always something new for you to read, the list with essential guitar effects will be constantly updated. If you are just starting out, we recommend going through some online guitar training before you dive in the guitar pedals world.
Teisco first began importing guitars to the United States under their own brand in 1960. In 1964, the company then switched the name of their U.S. brand to Teisco Del Rey. The company was then sold in 1967, and the Teisco brand name stopped being used for guitars sold in the United States in 1969. Guitars were still sold under the Teisco name in Japan until 1977.

That's right. It's neck first, then bridge height, then intonation (at least the way I do it). Nut height can be taken out of the equation by putting a capo on the first fret, so it can be sorted out later if there are any problems with it. Of course if you were to put a capo on the first fret, you'd need to compare that with the 13th fret when setting up the intonation.
I'll second the neck comment, conditionally. My first guitar was a hand-me-down Monterey archtop acoustic that had been my uncle's, and it have a sharp V neck. Out of nostalgia I bought another Monterey on eBay and its cross section feels like a tomato can lying in my hand. After a refret it plays smoother and easier than anything that fat has a right to. The original frets..., not quite. 

Most of the guitars, banjos and mandolins my customers use and collect have been made by major manufacturers such as Martin, Gibson and Fender or a few superb handcrafters such as D'Angelico and Stromberg, but over the years, by far the greatest number of instruments purchased in the USA and worldwide have been lower-priced student models. Prior to 1970 most student grade instruments sold in the USA were made here by companies such as Kay, Harmony and Regal in Chicago or Oscar Schmidt of Jersey City, New Jersey, and Danelectro of Neptune, New Jersey. When I started out playing and collecting guitars in the mid 1960s, brands such as Harmony, Kay, Stella, Silvertone and Danelectro were the standards for student use. We saw very few Oriental imports.
As far as reliability goes, a guitar is actually quite simple to make reliable. Build, sound quality and playability are much more important than reliability per se, simply because if the guitar is at least half-decently made it usually turns out to be quite dependable. The biggest reliability issue would be a guitar that cannot stay in tune very long. This is something that often happens in regards to the build and material quality of acoustic guitars, but with electrics it’s something that can usually be corrected by swapping out the tuning machines to locking ones, or at least better-performing ones as well as setting the intonation and neck relief correctly.
Since joining Charley's team, Russell has worked on hundreds of guitars. Music shops across Dallas and Fort Worth call him with questions. He's even corrected other guitar masters' mistakes, and he's also repaired some of the music industry's finest guitarslingers, including the guitarist from Cold Play and countless prominent local musicians. "It's part of the joy is knowing that I'm helping put players in a position where they can get on stage and feel confident knowing their guitar is working at its peak." He's also probably the only guitar master on this list asked to restore a broken guitar back to its original broken state. But it wasn't just any broken guitar. It was Elvis Presley's Martin D-28. "Elvis had broken it." This guy is truly more than a guitar master; he's a magician performing musical magic at Charley's five days a week.
Why We Liked It - Unless you’re looking for an electric guitar to play genres like heavy metal, chances are you would love this guitar. It just makes us happy and it’s hard to put it down. Fender is a good brand and they offer guitars of very high build quality. It’s available in green, blue and red, so you can really get a guitar that matches your personality and music.
We are here today to help you break free.  It's time to understand the difference between the types of guitar strings.  We can have higher value from our brand of choice or any other by understanding which product serves our personal preferences and instruments the best.  Let’s dive in and learn about the many variables that makes certain strings better or worse for each individual player.
You’re probably not going to damage your laptop by plugging in a guitar. But take it easy. Instrument output is usually about 10dB louder than mic level and 10dB quieter than line level. But there’s a big variation between instruments, and of course, your guitar has a volume output. On an electric, it’s just an attenuator — there’s no active circuitry, the volume knob just knocks down the output of your pickups, some use it as creative control, some just to match a cheap amp better.

Clapton is good… not gonna argue that he is an amazing guitarist… but no where near the best guitarist of all time…. Satriani can play ANY clapton riff, solo, song, chord progression, whatever.. Clapton can’t come close to playing any of Joe’s stuff. And most of Claptons best songs are JJ Cale tunes. Cocaine, Layla, After Midnight, etc,…. etc…. Oh and Clapton put out a whole album dedicated to Robert Johnson and admitted that most of the songs are redone and reworked because “the man” Clapton couldn’t play em anywhere near as well as Mr. Johnson.

These are hybrid tube and transistor amps. They are not emulators like a line 6 or other amps. They have 8 different analog amp circuits based on various amps, they don’t call them what they are but they are similar to Fender, Vox AC15, Vox Ac30, Dumble, Marshall and I think an Orange ( CLEAN1, CLEAN2, CRUNCH1, CRUNCH2, OD1, OD2, H.GAIN1, H.GAIN2). I don’t use the higher gain ones much - they are very heavy metal sounding. They also have very nice modulation effects - Chorus, Delay, and Reverb. I no longer use a separate chorus or reverb in my signal chain. The amp uses a 12AX7 tube pre-amp and the power amp which gives the tube overtones to the analog circuit you choose. Plus, you can bias the tubes to bright and power in both the pre-amp and post amp.
The movement to all-transistor amplifiers probably followed hot on the heels of the hybrid amps of 1968. The 1971 Univox catalog features a new, updated line of tube amps, but also has a little offset-printed flyer showing the Univox A Group of solidstate amps, which probably debuted a year or two before. These had black tolex-covered cabinets with vinyl handles, black grillcloths surrounded by white beading, and, on some, corner protectors. On amps with front-mounted controls, the logo had changed to wide, block, all-caps lettering printed on a metal strip running across the top of the grillcloth just under the panel. Combo amps with this logo treatment included the U-150R and U-65RN. The U-150R ($177.50) offered 20 watts of power running through two 10″ speakers, with reverb and tremolo, three inputs, and six control knobs. The U-65RN ($110) had 15 watts, one 15″ speaker, reverb and tremolo, with three inputs and five knobs. Joining these was the UB-250 ($150), a piggyback bass amp with 20 watts, 15″ speaker cabinet, two inputs, volume and tone. The U-4100 Minimax ($299.50) was a bass combo amp with 100 watts pushed through a 15″ speaker. Controls were on the back, with two channels for bass and normal. This had a rectangular logo plate on the upper left corner of the grille, with block letters and a round bullet or target design.
The body is pre-drilled and crafted from basswood, while the maple neck is meant to be glued into the neck joint, something that requires a bit of care and precision. Because of its hollow body design, installing electronics can be a bit of a challenge, but very doable as attested to by reviews. Note that wood is raw and unfinished, so you'll need a bit more sanding and patching before you paint on it.
As a rule, you don't add much, if any, reverb to low-frequency sounds, such as bass guitar or kick drums. Where you need to add reverb to these sources, short ambient space emulations usually work better than big washy reverbs, which tend to make things sound muddy. Taking this a step further, you can also make a mix sound less congested by EQ'ing some low end out of your reverbs.
Obviously, what I've done is to give myself a choice of three different sounds--a close, ballsy sound, a mid-range room sound, and a more distant room sound. By setting all three mics up at the same time, putting them each in a different input, and assigning them all to the same track on tape, I've given myself the option of having any one of those sounds immediately available to me, or a combination of them.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"distortion & overdrive effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category3"}
If you can afford to go to a store and drop $3000 on the latest, greatest Les Paul Gibson or vintage Fender Stratocaster, this is a very different question. But let’s assume your budget isn’t quite that big. Many affordable guitars are very similar, but come in a variety of packages that include lots of extras and even an amplifier. In case you are looking to buy the amp separately, here is an amazing list of 10 Best and Affordable Guitar Amps for Beginners: 2016 and while you are it, check out: Top 5 Guitar Plug-Ins You Need to Know: AmpliTube, Guitar Rig & Others.
Choosing an electric guitar can be a difficult feat, especially if you have never played electric guitar before. There are so many brands of electric guitars and so many things you need to consider while making your choice. Among the things you need to consider are shape, musical preference, and price. In addition, you need to take a look at the best electric guitar brands to help you choose the highest quality guitars out there that will fit your preference and give you the best playing experience. This is why we have put together a list to give you a look at said brands.
Compressor: Compressors make loud sounds quieter and quiet sounds louder by decreasing or "compressing" the dynamic range of an audio signal.[60] A compressor is often used to stabilize volume and smooth a note's "attack" by dampening its onset and amplifying its sustain. A compressor can also function as a limiter with extreme settings of its controls.[61]
What I really want is a pelham blue or mostly-bluish-but-a-little-teal gibson sg with an ebony fretboard. the fretboard is absolutely a deal breaker. i'll probably change the pickups to WRC's so stock pickups are unimportant. Could get a used Elliot Easton, but I'd have to buy it used, sight unseen, and the trem isn't really ideal for how I tend to play, so I was hoping there was someone out there who does this. I am kinda surprised that no one does. It's one of the most iconic designs in history, why no interest in BTOs?
In the midst of the controversy, conservative commentators alleged that the raid was a politically motivated act of retaliation by the Obama administration, as Juszkiewicz had frequently donated to Republican politicians, including Marsha Blackburn and Lamar Alexander. Chris Martin IV, the CEO of Gibson competitor C.F. Martin & Co., had donated over $35,000 to the Democratic National Committee and Democratic candidates in the same time period. Though Martin featured several guitars in its catalog made with the same Indian wood as Gibson, the company was not subjected to a raid.[55] Following revelations in the 2013 IRS targeting controversy, the right-leaning magazine FrontPage declared that "there is now little doubt the raid...was politically motivated," and that "the Gibson Guitar case can hardly be dismissed as regulatory overreach. In hindsight, it was an ominous foreshadowing of the explosion of misdeeds we are witnessing today.[56]
While close-miking can indeed be punchy and muscular, you’ll often find it doesn’t capture the full breadth of your electric guitar tone – that is, it simply doesn’t sound the way your amp sounds in the room. That’s because when you stand somewhere near the middle of any room and play an amp that’s placed a few feet away, several other elements affect the sonic picture. The distance between your ears and the speaker (the “air”), the shape and size of the room, materials used to make the walls, ceiling and floor and/or their coverings, the ways in which sound reflects from them, along with other factors all contribute to how your amp really sounds in the acoustic environment. Most engineers find, therefore, that they need to use some form of distant miking when the aim is capturing a realistic amp tone.

Southpaw Guitars has over 900 Left Handed Guitars and Basses In Stock at any time. At Southpaw Guitars you will find a knowledgeable friendly sales staff to provide Service, Assistance, and Guidance as you purchase your Dream Guitar. Furthermore, You will not be greeted by hold music, transferred between departments, treated discourteously, or given the sell what we have routine. We are conveniently located in Southwest Houston. 713-667-5791
According to the laws of electromagnetism, whenever an iron coil is moved inside a magnetic field, an electric potential is generated in the iron coil. This arrangement is known as an electromagnet. An electric guitar uses the same principle for generating an electric signal using small electromagnets which is then rectified and amplified to reach an appropriate audible sound level.
In January 1986, Gibson changed ownership and began manufacturing a range of varied Les Paul models to suit different user needs. The 1980s also saw the end to several design characteristics that were classic to the Les Paul, including the volute and maple neck. However, due to consumer demand, the Gibson Les Paul guitar is available today in an array of choices, ranging from guitars equipped with modern digital electronics to classic re-issue models built to match the look and specifications of the guitar’s earliest production runs from 1952 to 1960.
However, in my opinion, the reason why two pickups in parallel sound so detailed is not because they do not loose high frecuencies, on the contrary, it is becuase they loose mid frecuencies by the phase cancelation that occur when two signals not 100% identical are sumed toguether. you get the same effect with two microphones combined. The slightly diferences in phase in both signals makes some cancelations, being higher in frecuency the closer together. Take a hum pickup as an example. If yuo wire it in parallel, the sound is similar to that of a stret in between position, but not equal. It is because the reange of frecuencies that gets cancelled are diferent because the two coils are much closer to each other. Cheers!

It comes in lots of different colors, has a great quality at a bargain price. The HSS combination of this guitar is capable of playing a wide range of tones and sounds. It has a solid body and is quite comfortable to play. It has a Tremolo Bridge, which is not the best in the market but works quite well. Then there are tuners, which are also good enough. 
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
It's Mal - i posted the comment ref the muted G string on my Epi Les Paul 1960 Tribute - thanks for your response it was very good of you. I'm going to be playing (when i say playing i really mean faffing with) my guitar later so i'll have a look at the saddle, though i have rubbed my finger over it to see if there were any obvious issues which there wasn't. I have also rubbed the graphite from my clutch pencil over it when changing strings - no improvement; i'll get magnifier out and take a closer look and let you know, i may take you up on your kind offer if i'm still stumped.
I’ve written in previous issues of Premier Guitar about how the size and shape of a guitar’s headstock affect its sustain and tone. Clearly, the mass of the tuning machines is a factor in this, as well. Having overseen the building of tens of thousands of custom guitars over the course of my career has given me cause to consider machine-head weight as a fine-tuning tool in and of itself. This kind of mod is more complex than the others I’ve presented here because it is harder to predict, and obviously more costly to dabble in because it involves replacing the existing tuners. Nevertheless, I put it out there for those of you who are willing to go to the limit of sanity in the search for a responsive instrument.
The reason why you would want to have one of these on your pedalboard is simple. An EQ pedal allows you to adjust a variety of frequency bands and shape your tone based on your own requirements. As you evolve your skill and knowledge, you will soon realize that you can’t play without a pedal of this type. When it comes to some notable models, Empress ParaEQ comes to mind as the best choice.

{ "thumbImageID": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Black/430855000011000", "defaultDisplayName": "Epiphone Les Paul Special II Plus Limited Edition Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black", "sku": "sku:site51275425411034", "price": "214.99", "regularPrice": "214.99", "msrpPrice": "348.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Black-1275425411034.gc", "skuImageId": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Black/430855000011000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Blue", "sku": "sku:site51275425411029", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "348.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Blue-1275425411029.gc", "skuImageId": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Blue/430855000012000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Heritage Sunburst", "sku": "sku:site51275425411031", "price": "234.99", "regularPrice": "234.99", "msrpPrice": "348.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Heritage-Sunburst-1275425411031.gc", "skuImageId": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Heritage-Sunburst/430855000191000", "brandName": "Epiphone", "stickerDisplayText": "Clearance", "stickerClass": "", "condition": "Clearance", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }