One of more commonly known effects for musicians is distortion. It falls into the family of effects sometimes referred to as "dirt" boxes: Distortion, Overdrive, and Fuzz. In simple terms, it is cutting the top and bottom of the sound wave off using a technique known as "hard" clipping to create a more square shaped wave instead of the more natural sine wave formation. A solid explanation on the techniques and methods of creating different types of distortion can be found on Wikipedia.

In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.

Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.
Orville Gibson founded the company in Michigan and stayed a family business until the early 50's. Ted Mcarty ran the company from 1951 or so, and is the "father" of most successful Gibson electric guitars, the Les Paul, the SG, Explorer, Flying V, ES-335 and so on.. In the late 60's Gibson was bought by the Norlin Corp, who mainly were known for making refrigerators. Most feel Gibson adopted a quanity over quality approach to guitar making during this period and 1970's to 1980's Gibson electrics are considered less desireable by most guitar collectors, and considered outright junk by many others.. Cosmetic changes to Gibson models during that period apparently reflect the poor taste of the buying public during that era... and while a 1974 Gibson SG may look ugly compared to the classic 1961 or 1968 models, please remember this was the era of ployester liesure suits and Chrysler Cordobas.. In 1986 Gibson was bought by a group who understood guitar making, and is a privately held company to this day. Gibson quality has appeared to improve steadily from 1987 to present day, but it seems to be unanimous that todays models do not approach the craftsmanship of the late 1950's when Gibson apparently peaked.
Crafted with quality body woods, it features a solid cedar top with a wild cherry back and produces a dynamic sound with a good mid-range that projects wonderfully. Sitting at the top is a distinctive, tapered headstock, which allows for greater tuning stability, while the hand-finished silver leaf maple neck – with rosewood fretboard – is slightly fatter than other acoustics, and is great for fingerstyle guitarists.
In 1959, with sales under pressure from the more powerful Fender Twin and from The Shadows, who requested amplifiers with more power, Vox produced what was essentially a double-powered AC15 and named it the AC30. The AC30, fitted with alnico magnet-equipped Celestion "blue" loudspeakers and later Vox's special "Top Boost" circuitry, and like the AC15 using valves (known in the US as tubes), helped to produce the sound of the British Invasion, being used by The Beatles, The Rolling Stones, The Kinks and the Yardbirds, among others. AC30s were later used by Brian May of Queen (who is known for having a wall of AC30s on stage), Paul Weller of The Jam (who also assembled a wall of AC30s), Rory Gallagher, The Edge of U2 and Radiohead guitarists Thom Yorke, Jonny Greenwood and Ed O'Brien. The Vox AC30 has been used by many other artists including Mark Knopfler, Hank Marvin who was instrumental in getting the AC30 made, Pete Townshend, Ritchie Blackmore, John Scofield, Snowy White, Will Sergeant, Tom Petty, The Echoes, Mike Campbell, Peter Buck, Justin Hayward, Tom DeLonge, Mike Nesmith, Peter Tork, Noel Gallagher, Matthew Bellamy, Omar Rodriguez-Lopez, Dustin Kensrue, Tame Impala, and many others.
The relationship between perceived volume (loudness) and power output in watts of an amplifier is not immediately obvious. While beginners sometimes assume that there is a linear relationship between perceived volume and wattage (e.g., beginners may think that a 50-watt amp will be much louder, or about ten times louder than a 5-watt amp), in fact the human ear perceives a 50-watt amplifier as only twice as loud as a 5-watt amplifier (which is a tenfold increase in power in watts). Doubling the power of an amplifier results in a "just noticeable" increase in volume, so a 100-watt amplifier is only just noticeably louder than a 50-watt amplifier. Such generalizations are also subject to the human ear's tendency to behave as a natural audio compressor at high volumes.
Reverb is one of the most fundamental effects for electric guitar, which is why it is already built into most amps. Reverb adds natural sounding depth to your sound. Used extensively in the recording world, electric guitars do not sound “right” without it. Just a little makes the guitar have more of a natural sound and decay, but you can go to the extremes and get cavernous depth to your sound. Plate and spring are the most common types, but with so many makers coming up with new sonic “spaces” to play in, finding your reverb sound is a priority.

The Teisco brand name stands for 'Tokyo Electric Instrument and Sound Company'. Teisco was founded in 1946 by renowned Hawaiian and Spanish guitarist Atswo Kaneko, and electrical engineer Doryu Matsuda. Teisco guitars sold in the United States were badged "Teisco Del Rey" beginning in 1964. Teisco guitars were also imported in the U.S. under several brand names including Silvertone, Jedson, Kent, Kingston, Kimberly, Tulio, Heit Deluxe and World Teisco. While guitars manufactured by Teisco were ubiquitous in their day, they are now very collectable."
Achieved with springs or plates, as in the early days, reverb is a distinct sound all its own. The effect has been lured in to the delay camp more in modern times because the same bucket brigade analog technology or digital delay technology that is used to create long echoes can be manipulated to produce a reverb sound, too. Tap the multistage analog delay chip at a very short delay, and layer these with other such short delays, and a reverb effect is produced. It has something in common with the spring reverb in guitar amps—or old studio plate reverb units—in that both approximate the reverberant sound of a guitar played in an empty, reflective room. While many players make good use of reverb pedals, including anything from Danelectro’s newer, far-eastern-built units to old and new Electro-Harmonix and Boss models, most consider the amp-based, tube-driven spring reverb to be the pinnacle of the breed. But there are many great guitar amps out there with no reverb onboard, so for anything from your tweed Fender Bassman to your Marshall JTM45 to your Matchless DC30, an add-on unit is the only option.

Some combo amp and speaker cab manufacturers sell fitted amp or cab covers, to protect the equipment from dust and inclement weather. Professional touring bassists may place their amp heads, combo amps and speaker cabinets into foam-lined road cases to protect them during transportation. Rackmounted road cases typically have recessed handles on the sides for carrying the case. Touring professional bassists may have roadies who carry their amps and cabinet on and off stage.

Bass distortion effects preamplify the signal until the signals' waveform "clips" and becomes distorted, giving a "growling", "fuzzy" or "buzzing" sound. Until the late 1980s, distortion effects designed specifically for electric bass' low range were not commonly available in stores, so most electric bass players who wanted a distortion effect either used the natural overdrive that is produced by setting the preamplifier gain to very high settings or used an electric guitar distortion pedal. Using the natural overdrive from an amplifier's preamplifier or a guitar distortion effect has the side effect of removing the bass' low range (low-pitched) sounds. When a low-range note is amplified to the point of "clipping", the note tends to go up an octave to its second harmonic, making deep bass notes sound "tinny".

The key feature that makes the GT-1000 stand out from the crowd is the inclusion of the ingenious AIRD (Augmented Impulse Response Dynamics) technology which ensures your effects respond correctly with the likes of tube amps and don’t muddy your sound. You can read more about the AIRD technology here, but in a nutshell, it ensures the dynamics of your unique amp are preserved. With other multi effects, you might find have to turn your amp emulations off if you want your effects to respond correctly to YOUR amp, but with the GT-1000 you won’t have to do that as you can select which type of amp you’re playing with and the pedal will respond correctly.
The S670 QM is a speedster's guitar, with locking tuners and a razor thin "Wizard III" Maple neck, developed by Ibanez to be specifically fast and easy to play. Players with smaller hands or those who like to use their thumb to grab notes on the sixth string will find the neck particularly accommodating. So this model (and many of the Ibanez designs) score high marks for playability.

Although Ibanez’s S series is designed to be far more versatile than the RG guitars, its Iron Label collection is built for one, brutal purpose: heavy metal. The SIX6FDFM represents exactly what we consider a ‘value-for-money’ guitar: It sports many premium specs, is skewed towards a single use, and, at a little under $1,000, won’t hemorrhage your bank account.
If you’re making the crossover from electric to acoustic, then Takamine won’t be a particularly well known brand to you, but rest assured that they’re a top make when it comes to acoustics, and of course electric acoustics. The GN93CE-NAT is a mid-range electric acoustic that features some really nice touches, such as the rosewood fretboard, and is an interesting choice.
While the modifications described above have all been passive (i.e. they don't require an external power source), active electronics considerably increase the number of possible wiring options. These can range from simple preamps that offer a volume boost and buffer the instrument's signal (to prevent loss of higher frequencies in longer cable runs), to multi-band equalisers and more.[30][31] Enterprising guitarists have even built entire effects processors into guitars, such as the Korg Kaoss Pad.[32]
I’d like to think that I am a little more forgiving of slight finish errors than most, so most of the horror stories surrounding Gibson QC do not bother me too much. After all, one area of the body where the sunburst color doesn't fade at EXACTLY the same point all the way around? That sounds more like middle aged guys trying to save face around their buddies after their wives saw the credit card bill the next month and made them take it back.
Back in the mid-60s, a desire for independence in business led to John Skewes forming a small musical instrument agency and wholesale business based at his home near Leeds, England. Over time, his new business steadily began to take off, and soon included throughput of some self-branded lines of musical merchandise. That effective early decision to carry self-branded merchandise continues to this day, with their signature Vintage® acoustic and electric guitars and basses which were first produced and sold in 1985. Today, Skewes is the largest family-owned independent musical merchandise distributor in the U.K. and the Vintage ‘family’ includes Fret King® electric guitars, Pilgrim® Banjo’s and Mandolins, Laka® Ukuleles, Encore® electric and acoustic guitars, and Kinsman® cases.
Birmingham’s Table Scraps add a grunge-y Midlands mud to the garage rock sound established by the likes of 13th Floor Elevators and The Cramps. Guitarist Scott sticks to a “three-pedal limit”, using a Death By Audio Fuzz War (“a versatile monster”), Echo Dream 2 and Boss DD-3 to jarring effect to create freaky, DC59’d melodic lead bursts. As Scott says: “Once you try 12-string everything else only sounds half as good.”

THE NECK POCKET The next step is to rout the neck pocket and body cavities. For the neck pocket I like to use a 1/4" bit and leave the scrap wood edge around the body to give the router the extra support it needs when routing the neck area. To find out how deep you will have to rout the pocket measure the total thickness of the heal of the neck. Then measure the hieght of the bridge from the bottom to the top of the groove the string will sit in on the saddle and add about 1/8" to it. That allows for the string clearence over the frets. The subtract that from the overall thickness that you came up with when you measured the heal of the neck. That will give you a pretty accurate depth that you will need to carve the pocket down to. Be very careful when you rout the neck pocket! You don't want to make it too big otherwise you end up with gaps between the neck and the body and you don't want to go too deep because it can be impossible to fix. Rout a little bit at a time, and set the neck in each time to make sure you get the proper fit. It shouldn't fit to tight and the pocket should be slightly lager than the heal of the neck because you will have paint accumulation in it which will shrink it a little.
Radial Engineering Ltd. is a manufacturer of professional audio products based in Vancouver, British Columbia, Canada. The company offers a wide array of products that are sold under brand names such as Radial, Tonebone, Primacoustic, Reamp and Zebracase. These are offered through a network of dealers and distributors that span the globe. Quality construction, exceptional audio performance and superb customer service are the underpins that have served to make Radial one of the most respected and trusted brands in the industry.
This was my first attempt on building pedal. Now I'm hooked. It was such a joy putting it all together and quite a learning experience. I cannot emphasize on reading/studying the instructions thoroughly. I would rate the included instructions a 10, a 5 STAR. Very clear and easy for a novice pedal builder to understand and walk through. Very well illustrated as well. Take your time as you can easily overlook soldering connections. The main problem I encountered was a shorting problem. The two soldering terminals along each side of the tube socket were located very close to the tube base socket and volume/gain pots. Follow the instructions by running a wire between the volume and gain pots, as well as the tube socket. Once, I've addressed this problem, it was clear sailing from there.
Unlike the unit I am using here, the original units were large, AC powered, and the speed was controlled with an external pedal. Vintage Uni-Vibe pedals are very expensive at this point but fortunately we can find some very high quality reissues. Famous uses of Uni-Vibe are “Machine Gun” by Jimi Hendrix, “Bridge of Sighs” by Robin Trower, and “Breathe” by Pink Floyd.

Sensitivity: Valve amplifiers (current drive) are sensitive to crossover resonances and speaker impedance variations. Quality speaker systems often used passive crossovers that were second-order, constant impedance, and critically aligned to avoid resonant effects. Some quality speakers had copper caped pole pieces, which helped damp impedance variations. Note:- With solid-state amps in voltage drive, power decreases as the speaker impedance rises. With valve amps in current drive, power increases as the speaker impedance rises. Therefore a flat speaker impedance is synonymous with a flat frequency response.
yeah, i used to play the vht straight up sometimes. that amp was tonal sweetness, and had a tank reverb. if i dime it, i can get away with playing alot of stuff on the ac4. but i like having a little chorus for certain things, and i do a couple of songs that i would like to have a rotary pedal for, and although i'm not big on reverb, i don't mind using a touch of delay in place of it. if i did have a wah, i'd use it as a tone knob. oh, and i want a harmonizer. specifically, the eventide pitchfactor.

Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.

From loopers to distortion, effects pedals are a major part of guitar playing these days – and there are two ways to feed these pedals to the amp. You can run them from the front through the instrument input, or you can use an FX loop. The benefit of the latter is that it allows you to insert effects between the preamp and power stage. It’s a complicated topic that relies on a lot of trial and error – not to mention personal taste – but plugging boosters (overdrive, distortion, wah) into the front and then using an FX loop for modulators (chorus, flanger, delay) tends to deliver the best results.
Having lived in an apartment when learning guitar, it was painful. Using headphones works, but most days you just want to hear it from an amp like it was meant to be. Your only real solution is to try out some of those tiny lunchbox amps and see if they can fill that void. Another option is to start saving for a house, or find a friend who has one to jam out in.
Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.
Mundt Music of Longview, LLC is your one stop guitar shop. Located at 2312 Judson Road, we have everything that you need whether you’re buying your first guitar or adding to your growing collection. Make sure to join us in store on October 10, 2016 at 6:30pm, for our “Taylor Road Show” event. Guests will enjoy an evening of guitar talk and demos with Taylor factory staff and guitar makers from El Cajon, CA. It’s an event that any guitar enthusiast won’t want to miss.
The coolness in ’38, however, lay in two lap/amp combinations, the Supro 60 Electric Combination and the Portable Supro 70 Electric Combination. Both featured the little pearloid Supro Electric Hawaiian Guitar tucked into an amp-in-case! The Supro 60 featured a rectangular case with an 8-tube amp and 4″ speaker. This amp had to be plugged in, but was definitely boss. The combo cost $60. The Portable Supro 70 combination featured the same amp but operated with batteries (“…available at any radio supply house”). Most folks are conversant with Nat Daniel’s amp-in-cases from the early ’60s, but the idea was actually developed a good 25 years earlier. Actually, Daniel may have invented the first amp-in-case in 1936, with the amps he made for the first Epiphone Electar C steel guitars. These apparently had an amp built into the case, however, they were quickly replaced with a separate Model C amplifier. There’s no evidence that the Supro was a copy of the earlier Epiphone, but the idea was clearly around at the time.
One of the most useful features of guitar-amp simulation plug-ins is that they can help mask some quite serious problems with whatever you're putting through them, without necessarily changing it beyond all recognition. I've found that even relatively clean settings can disguise such horrors as clipping on transients to a surprising extent. If you're ever faced with a badly recorded guitar part (even one that's played on an acoustic guitar, or through an amp), try putting it through an amp modeller.
When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).
Situated just under the Spectrum 5 were the Teisco K guitars. Indeed, these Ks may have been introduced slightly before the Spectrums, since they appear in a 1966 Japanese Teisco brochure that does not contain the Spectrum. A second ’66 Japanese Teisco brochure contains both Ks and Spectrums. The K guitars were very similar in profile to the Spectrum, except that the horns were not curved, and flared out more or less equally in a more tulip shape, though still pointing slightly inward. These still had the German carve relief, 22-fret rosewood fingerboards, plus the new hooked headstocks. Inlays, however, were dots, and the vibratos were the more pedestrian Japanese version of the Bigsby. Pickguards were the new striped metal affairs introduced the year before, extending from above the strings down through the lower bout control area.
The first rule of making repairs to any instrument is to decide if the value of the instrument, financial and otherwise, is worth the price of the desired repairs. If the repair is small enough to be comparable to guitar setup cost (about $50) then it is almost always worth having done. However, for large and expensive jobs like painting and neck replacement, the cost can easily outweigh the need of repair.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: victoria","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"victoria","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
The Dobro All-Electric featured a pickup purchased from the fellow who’d invented it in ’32, Arthur J. Stimson of Seattle, Washington (it was not invented by Dobro’s Vic Smith, as has been reported elsewhere). This was, as far as we know, the first modern electric guitar pickup, with the magnet under the pickup, rather than over the strings, as on Electro/Rickenbacker instruments (or the presumed “transducer” on the ’28 Stromberg-Voisinet). Stimson’s pickup had a large horseshoe pickup in the body with two coils, one for bass and one for treble strings, each with its own bar polepiece. A 1/4″ jack outlet sat on the top down near the standard stamped National trapeze tailpiece, next to a single volume control.
As this effect is more pronounced with higher input signals, the harder "attack" of a note will be compressed more heavily than the lower-voltage "decay", making the latter seem louder and thereby improving sustain. Additionally, because the level of compression is affected by input volume, the player can control it via their playing intensity: playing harder results in more compression or "sag". In contrast, modern amplifiers often use high-quality, well-regulated power supplies.
One half step down from standard Drop A. Used by bands such as Trivium on some songs from Silence in the Snow and The Sin and the Sentence, Destrophy, TesseracT, Brian "Head" Welch, After The Burial on some songs from their Rareform, In Dreams and Dig Deep albums, Within the Ruins, In Hearts Wake and Periphery. Jim Johnston used this tuning for the song "I Bring the Darkness (End of Days)".
Copyright © 2016 Sonoma Wire Works. All rights reserved. RiffWorks and the RW Logo, RiffWorld, RiffCaster, RiffLink, RiffRumble, InstantDrummer, StudioTrack and the StudioTrack iPad App Logo, the FourTrack iPhone App Logo, GuitarTone and the GuitarTone Logo, GuitarJack and the GuitarJack logo, DrummerPack, KitPack and Discrete Drums are trademarks of Sonoma Wire Works. DrumCore and KitCore are registered trademarks of Sonoma Wire Works. iPod, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. ReWire and REX2 are technologies licensed from Propellerhead Software. VST is a trademark of Steinberg Media Technologies GmbH. All other trademarks are property of their respective owners.
STEM educators will take part in an intense five-day electric guitar design/build institue. Each faculty member will build his/her own custom electric guitar and will engage in student centered learning activities that relate the guitar design to specific math, science and engineering topics. Participants leave this weeklong experience with their custom-made guitars, curriculum modules with short term assessments that can be immediately integrated into the faculty team school curriculum.
The Boss Katana Head is a full featured amplifier head that can handle stage, recording and practice duties. It does this with its built-in power attenuator, which lets you choose between 100W, 50W and a super quiet setting of 0.5W. To complement the 0.5W setting, Boss even added a built-in 5" speaker into the amp head - making the Katana head to be technically a combo amp in head form factor. Complementing its versatile power rating is its built in amp modeling, which gives you five voicings from acoustic, to clean to high-gain. As expected, this amp comes with essential effects from Boss, with over 50 of them to choose from, 15 of which can be loaded to the amp for quick use, albeit limited to just 3 effects running simultaneously. Finally, all these features are packed in sleek looking profile that feels really solid, as expected from Boss.
This is a guitar tuning and style of playing on the Classical Guitar that has been developed by Ian Low. It was recently publicized in the form of a series of videos posted onto his YouTube channel on 14 July 2016. The 6 strings are tuned to F, G, C, E, C# and C using the standard guitar strings EADGBE strings to allow a different style of harmonic playing.

Players perceived a loss of the initial high quality of Fender guitars after the company was taken over by CBS in 1965. As a result, the late-1960s Stratocasters with the large “CBS” headstock and (from the mid 1970s) the 3-bolt necked models (instead of the conventional 4 bolts) with the “Bullet” truss-rod and the MicroTilt adjustment system fell out of fashion. However, many blues-influenced artists of the late 1960s soon adopted the Stratocaster as their main instrument, reviving the guitar’s popularity. Also, so-called ‘pre-CBS’ Stratocasters are, accordingly, quite sought-after and expensive due to the perceived difference in quality even compared with contemporary post-CBS models. In recent times, some Stratocasters manufactured from 1954 to 1958 have sold for more than US$175,000.
Today’s beginner guitars are far superior to the hunk of wood with strings I started with, and now there is a huge array of instruments to choose from. In fact, I’d go so far as to say if you only intend to play guitar for fun you’ll never need to spend another dime on gear beyond your starter setup, if you don’t want to. (Except for things like strings and picks, of course.) That definitely wasn’t true thirty years ago.
Finally, there were some twelve Hawaiian lap steels in ’55, the EG-NT, EG-K, EG-Z, EG-A, EG-S, EG-R, EG-L, EG-7L, EG-P, EG-8L, EG-M and EG-NW. Again, since I have no reference materials, there’s no point in attempting any description. However, many of these guitars continued on into the ’60s where we’ll discuss them in detail, and you can probably extrapolate backwards to these mid-’50s models, allowing for pickup changes, etc.
Alas, the DT-250 was more of a punctuation point than a sign of the times. Or maybe it was a sign of the times. The Phil Collen model (minus his name after ’85) and the flametop DT-350 made it through 1987, but this DT-250 lasted only from ’84 to ’85. Unfortunately for this heavy metal monster, pointy guitars were already on the way out when it appeared, about to be eclipsed by the Superstrat craze that would dominate the rest of the ’80s. While these redboards do not really qualify for rarebird status, they’re not all that common. Over the course of their production, only 1,432 were built for worldwide distribution.
I always respond to these enquiries as I have played some in UK shops and like them a lot .Well designed and made though I am sure the odd duffer gets through like most imports .Trev Wilkinson did the designing ,though it should really read ,modifying ,as most are other makers basic designs,.The Les Paul lemon drop is superb judging by reviews and I loved their S types ..Worth the money it seems .I would prefer a Vintage Strat , 335 or Les Paul to the other cloned alternatives .I did buy an Epiphone Dot but after playing a Vintage 335 ,wish I had bought it instead .The ones I played were Chinese
Playing different guitars in a music shop is a great way of familiarising yourself with each model's unique qualities but don't forget to take off any objects that could scratch the guitar. A music salesman will let you try as many guitars as you like but may not be too happy about the little scratch your coat button left. Your choice of guitar will usually be based on the type of music you wish to play and the aesthetic appeal of the colour and design.
Another thing to keep in mind is the purpose of the amplifier. And I don’t mean the actual purpose. We all know that I’m pretty sure. What I mean is what you will be using it for? Are you a beginner who wants to practice a lot in their basement before they ever take their guitar and amp into the daylight or maybe you have been playing for quite some time and want to record your music. MAYBE you have gathered all your strength and confidence (and your band) and decided to gig. All of these situations are somewhat different and various amps work for different purposes. While there are a lot of amps that do all of them together, sometimes getting an amp just for practice might be more efficient and, of course, affordable.
Alonso de Mudarra's book Tres Libros de Música, published in Spain in 1546, contains the earliest known written pieces for a four-course guitarra. This four-course "guitar" was popular in France, Spain, and Italy. In France this instrument gained popularity among aristocrats. A considerable volume of music was published in Paris from the 1550s to the 1570s: Simon Gorlier's Le Troysième Livre... mis en tablature de Guiterne was published in 1551. In 1551 Adrian Le Roy also published his Premier Livre de Tablature de Guiterne, and in the same year he also published Briefve et facile instruction pour apprendre la tablature a bien accorder, conduire, et disposer la main sur la Guiterne. Robert Ballard, Grégoire Brayssing from Augsburg, and Guillaume Morlaye (c. 1510 – c. 1558) significantly contributed to its repertoire. Morlaye's Le Premier Livre de Chansons, Gaillardes, Pavannes, Bransles, Almandes, Fantasies – which has a four-course instrument illustrated on its title page – was published in partnership with Michel Fedenzat, and among other music, they published six books of tablature by lutenist Albert de Rippe (who was very likely Guillaume's teacher).

I have a vox valvtronics amp I bought a while ago it has a real preamp tube and loads of very accurate effects great reverb 3 kinds good modulation effects awesome distortion and tube overdrive and very important it is easy to adjust effect level and a power knob that lets you adjust output 1 to 60 watts like a pr attenuator its great so you don't loose that sound of a cranked up amp when you don't want it to loud it also has a easy to use tuner this amp is very user friendly unlike some modeling and effects carrying amps and you can easily adjust effects levels with separate knobs no confusion also a pedal to control effects is available for about 50 dollars is a great studio or small gig still amp and saves a lot because all of the effects it offers its like having a vox tone labe on top of a amp exactly you can sound like van halen led Zeppelin pink floyd lady gaga or the beatles and more and the price is very competitive to all others in its category
Many web surfers contact me looking for a wiring diagram for an unusual / no name / import guitar after having no luck online. And sometimes you aren't going to find it, however, if you have an electric guitar that is similar to lets say a Strat ... it has 3 single coil pickups (and they are 2 wire pickups), one 5 way switch, 2 tone pots and 1 volume pot then you can simply use a Strat wiring diagram. It's often easiest to think of the instrument in terms of components not brand.
You wont be sorry with this harness, full size volume pot , push pull tone pot/switch both with good throw torque, great solder connects and a quality, all hardware was intact , just remove replace, I did have to carefully bend the lugs on the input switch to get it to seat properly in my Epiphone but other than that minor obstacle all went well, no hum or noise and the toggle feels solid, man Epiphone put some straight up junk electronics in my guitar so this was a great upgrade, thanks Kmise you got a new customer..will order another for my Jackson Kelly..
What we consider as standard size today were not so standard back in the '30s. Back then the "parlor guitar" or "blues box" was commonly used, with its compact body and mid-emphasized tone. Many artists used this instrument to shape many of the musical styles that we have today. The L-00 Standard from Gibson captures the iconic "blues box" faithfully for today's players, adding in their premium touch and modern tech that results in a true timeless museum quality instrument.

Looks like a good guitar. I honestly think that for 90% of the hobbyist players out there, after buying better pickups, the difference between the sound of a Squier and a real Fender is negligible. I could be wrong I guess, but my ear doesn't really pick up enough of a difference to justify the money for a more expensive guitar. The quality of the guitar plays a big part for me. For instance, when I first got my guitar, the frets weren't smooth. Bends sucked because the note had lost it's sound by the time it was bent all the way up. Finally through playing and polishing, they flattened. Now they play really nice. I'm sure that on a new Gibson, that wouldnt happen. Oh well. About the Tele headstock that you didn't like, what don't you like about it? Do you like the gibson style 3 tuners to a side configuration?(like an acoustic?)
What our panelists didn’t like about the Spider Classic 15 is the weird operation of its controls. Because Line 6 uses digital processing to model not only the basic sound of different amplifiers but also the way all of their controls work, whenever you switch amp sounds, the operation of the tone controls shifts radically. Thus, when you go to turn the treble down just a smidge, the sound of the amp changes quite a bit, and you have to spend some time experimenting to find the treble setting you want—or even get it back to how it sounded before you touched it. It also automatically adds reverb and perhaps a bit of chorus effect whenever you switch to the Clean sound; to shut off this effect, you actually have to use the effect knobs to turn the effect on, then turn it off again.

I bought this kit for myself. I wanted the satisfaction of building and playing my own guitar. The price was well within my budget. I did upgrade the electronics, put on a Bigsby tailpiece, a new roller tune-o-matic bridge, and planet waves self trimming tuners. The items in the kit were fine to use, but i wanted a one off guitar, that would have the sound and the look I wanted.
It can get a bit difficult trying to properly depict certain aspects of effects pedals to our newer musicians out there since much of music tends to be described in an intangible sort of manner which relies heavily the assumption of prior knowledge and personal tastes which is why we try our best to not get the pros out there the meat of the information they are looking for, but describe it in a way that players of even entry levels can comprehend. So with that in mind, one of the more complex aspects of effects pedals for newer musicians is their implementation of a signal chain.
A volume pedal does the same thing a volume knob on a guitar, but it allows you to control the volume with your foot. It is not a boost, it just allows you to sweep between zero output and the full output capacity of your instrument. Many guitarists use a volume pedal, also sometimes referred to as an expression pedal, to create pedal steel-like swells, where a note or chord is played, then the volume is slowly and smoothly raised. Volume pedals can also be used as a boost effect, by simply playing at less than full volume, then stepping on the pedal to go to full volume momentarily when you need the extra boost. Volume pedals can make a standard electric guitar sound like a pedal steel when used with a well-practiced foot technique.They can also be an important pedal to have in your toolbox when playing in a band with multiple guitars.

The following effects are a step up from your basic overdrive, distortion and fuzz, with more specialized sounds. In this category, you’ll find pedals that include effects such as time delays or frequency modifications – things that go beyond changing the shape of a sound by also changing the pitch, rhythm or both. Others are simpler, but still offer enough tone-altering potential to set them apart from the basic pedals.

A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.