Compression: A "limiter" is envisioned as a circuit which prevents the output signal from exceeding a certain limit. If it did this by clipping, it would cause distortion, but if it can do it cleanly by just progressively reducing the amplification of the incoming signal, then it may properly be called a compressor. A compressor reduces the overall dynamic range by "compressing" the gain of high amplitude signals while maintaining the design gain for lower amplitude signals.
But there are more questions – are you a beginner, or do you have 20 years playing experience under your belt? Are you on a tight budget, or is money no object? Do you prefer funk, or are you a full-on metalhead? Somewhere the perfect guitar is waiting for you, and – with hundreds of reviews on this site – chances are we have featured it on these pages!
While we have touched on the characteristics of single coil and humbucking pickups, to truly cover guitar electronics check out -‘Guitar Electronics for Musicians’ by Donald Brosnac which details the history of guitar pickups and goes into great detail about the mechanics of guitar pickups). It’s fairly heavy going for anyone new to the topic but also very interesting at the same time.
My guitar is in excellent condition and is all mostly original. The tuners are replicas of the original Klusons, and it came with non-original wooden legs. The legs were originally `sold separately, so it’s possible that the original owner opted for cheaper off-brand legs instead. I prefer to use a table-type keyboard stand anyway, mainly because it frees up more space for my feet underneath. This is my primary gigging steel; it’s reliable and versatile, and it usually turns a few heads as well due to its unique appearance. Aside from a broken name badge, it’s in excellent condition; it came with the cleanest original Valco case I’ve ever seen. There is some slight deterioration of the chrome plating, but otherwise there is little wear to be found. I previously owned a Supro Console Eight, and liked it so much that I traded it for the double-neck version. The Console Sixteen is a rare bird because it was produced only briefly; it first appeared in the 1958 Supro catalog and last appeared in 1959.

Well technically, the floor and the ceiling do shape the tone, post amp. Room acoustics are a major factor in the quality of sound recordings. Also Dan isn't wrong. Each thing that vibrates that eventually moves the pickup (while a note is being played or sustained) will disrupt the magnetic field. In physics there is hardly ever an instance where things have absolutely zero effect on the things around them. It comes down to the significance of the effect. For example, if something moves the pickup .05 picometers six times a second, then it likely has a negligible effect on the sound (i.e. our ears are not capable of detecting any difference. There does come a point where other variables do begin to change the characteristics of the sound. Additionally, as a string is struck, due to the rigidity (or slight lack thereof) the neck and body will vibrate, changing the distance between bridge and nut. The shortening and lengthening of this distance will then change the vibration frequency of the string. This can result in the dampening of vibration or potentially slight amplification of frequencies or overtones. Overall, it is impossible to say with absolute certainty that something does not have an effect on something else in this case. The truth, however, is that the degree to which the change is noticeable may not be detectable by the human ear.
From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.
The American Deluxe Telecaster (introduced in 1998; upgraded in 2004, 2008, and 2010) features a pair of Samarium Cobalt Noiseless pickups and the S-1 switching system. Models made prior to 2004 featured two Fender Vintage Noiseless Tele single-coils, Fender/Fishman Powerbridge piezo system and 4-bolt neck fixing. Other refinements include a bound contoured alder or ash body and an abalone dot-inlaid maple neck with rosewood or maple fingerboard, 22 medium-jumbo frets, rolled fingerboard edges, and highly detailed nut and fret work. The HH model sported an ebony fingerboard, quilted or flamed maple top and a pair of Enforcer humbuckers with S-1 switching (discontinued as of 2008). As of March 23, 2010, Fender updated the American Deluxe Telecaster with a compound radius maple neck, N3 Noiseless Tele pickups and a reconfigured S-1 switching system for wider sonic possibilities. The new model now sports staggered, locking tuning machines, which provide better break angle over the nut for increased sustain and improved tuning stability.
Another reason that some bassists prefer the "bass stack" approach is that it is much easier to customize a separate preamp/amp/speaker cabinet setup with a bass stack than it is to customize a combo amp. With a bass stack setup, a professional bassist can handpick the brands of preamplifier, graphic equalizer, power amplifier and speaker cabinet(s) they wish to use. It is also much easier to replace defective components with a bass stack than with a combo amp. If the power amp on a combo amp fails, only an electronics technician can repair or replace the power amp. With a bass stack, in which the power amp may be a separate component in a rackmount road case, the defective power amp can be removed with only a screwdriver and a new power amp can be mounted in the rack and connected to the other components. This facilitates replacement of components while on tour. Touring bassists may travel with one or more backup amplifier heads, to use in case the main amplifier head develops a technical problem.
If you're in need of some assistance, you've come to the right place. At BestReviews, our goal is to help you find the perfect products to fit your individual requirements. We test items in our labs, gather feedback from existing customers, and consult experts. The result? Fair and thorough reviews that help you cut through the jargon. Read on for our full guide to electric guitars to learn all you need to know to pick the right one for your next jam session.
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
The type of potentiometer you should use will depend on the type of circuit you are designing for. Typically, for audio circuits the audio taper potentiometer is used. This is because the audio taper potentiometer functions on a logarithmic scale, which is the scale in which the human ear percieves sound. Even though the taper chart appears to have a sudden increase in volume as the rotation increases, in fact the perception of the sound increase will occur on a gradual scale. The linear scale will actually (counterintuitively) have a more significant sudden volume swell effect because of how the human ear perceives the scale. However, linear potentiometers are often used for other functions in audio circuits which do not directly affect audio output. In the end, both types of potentiometers will give you the same range of output (from 0 to full), but the rate at which that range changes varies between the two.
In typical pedal effect chains you will most likely be running cable lengths that are much longer than 5.5 meters. The ME-80 allows you to keep your tone pure when running lots of effects. You can run a cable up to 5.5 metres into the input of the ME-80. The multi effects engine processes up to 8 effects in its internal signal chain. Then the ME-80 outputs your guitar signal as a 2,000 Ohm low impedance signal allowing you to run a much longer cable to the amplifier.
Unfortunately, there is very little documentation or early catalog literature on the Kingston brand, so it is nearly impossible to date their guitars or group them into series. However, we do know that these guitars were likely built by Kawai, Teisco, and/or Guyatone (other manufacturers are possible as well). At the time, Kawai was building guitars in the style of a Fender Jazzmaster as well as the uniquely shaped Burns double-cutaway. Your guitar has more of a Strat-shaped body and I have seen it called a “Swinga,” but I wasn’t able to find another exact comparison in my research. I think your guitar was made by Kawai in the mid-to-late-1960s, because Westheimer was likely done with Teisco when this guitar was built, and it doesn’t really look like a Teisco from that era anyway.
Now we’ve moved away from the three ‘main’ shapes of steel-strung acoustics, we start looking at the off-shoots and variants which exist to give players even more options and opportunity to find the guitar which is exactly right for them. First among them is probably still well-known and identifiable in itself; the round-shoulder dreadnought. Again, these are largely Gibson-led creations, and include among their ranks the famous J-45 style famously employed by the Beatles and Noel Gallagher.
The Ford Model T was revolutionary. The only horses involved were under the hood, which was a big enough deal at the time, but we now know that the assembly line process behind it would go on to revolutionize the way we manufacture tools, vehicles, and the rest of our modern appurtenances. In all honesty, the Model T had a long way to go. Consider how that horseless carriage would hold up today. When we put nostalgia and historic significance aside, it’s the last car you’d want take a long trip in or depend on for daily commutes. From a modern day performance perspective, the Ford Model T was garbage.

The Ford Model T was revolutionary. The only horses involved were under the hood, which was a big enough deal at the time, but we now know that the assembly line process behind it would go on to revolutionize the way we manufacture tools, vehicles, and the rest of our modern appurtenances. In all honesty, the Model T had a long way to go. Consider how that horseless carriage would hold up today. When we put nostalgia and historic significance aside, it’s the last car you’d want take a long trip in or depend on for daily commutes. From a modern day performance perspective, the Ford Model T was garbage.
Mike Longworth’s book shows at least three guitar amplifiers carrying the Martin name from the early ’60s. Who made them is unknown… most certainly it wasn’t Martin. In 1961 Martin marketed a pair of combos, the Model 110T and Model 112T. Both had top rear-mounted controls and a very groovy geometrical grillcloths in a sort of M.C. Escher pattern. Presumably the 110 featured a 10″ speaker, while the 112 had a 12″. The “T” suggests a tremolo circuit. In 1962 Martin offered a very cool #700 portable amplifier, a unit ensconced in a leather carrying case, presumably battery-powered.
Echo controls usually let you determine the level, the period between playbacks, and the decay—the rate at which succeeding notes become quieter and quieter until they fade out altogether. The period (or time) parameter is often controlled by a single button you push repeatedly in time with the music. This is called tap delay and keeps your echo effect from clashing with the music's time signature.
Someone recently posted one of my pedal demos in a thread on a guitar forum and stated that he really liked the sound of the pedal in the demo. Another forum member chimed in and said that for some reason, everything I play through usually sounds good. Shortly after, forum member “Squank” replied, “It’s a talent. Most gear can be dialed in to sound at least decent.”

The body of the instrument is a major determinant of the overall sound variety for acoustic guitars. The guitar top, or soundboard, is a finely crafted and engineered element often made of spruce, red cedar, redwood or mahogany. This thin (often 2 or 3 mm thick) piece of wood, strengthened by different types of internal bracing, is considered the most prominent factor in determining the sound quality of a guitar. The majority of the sound is caused by vibration of the guitar top as the energy of the vibrating strings is transferred to it. Different patterns of wood bracing have been used through the years by luthiers (Torres, Hauser, Ramírez, Fleta, and C.F. Martin being among the most influential designers of their times); to not only strengthen the top against collapsing under the tremendous stress exerted by the tensioned strings, but also to affect the resonation of the top. Some contemporary guitar makers have introduced new construction concepts such as "double-top" consisting of two extra-thin wooden plates separated by Nomex, or carbon-fiber reinforced lattice - pattern bracing. The back and sides are made out of a variety of woods such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is chosen for its aesthetic effect and structural strength, and such choice can also play a significant role in determining the instrument's timbre. These are also strengthened with internal bracing, and decorated with inlays and purfling.
Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.
Beginning about 1975, Hoshino began introducing original guitar and bass models to the market. At first, their original designs were subtle variations on the copy models. For example, the "Custom Agent" (model 2405) was basically a Les Paul with a fancy scroll headstock, a fancy pick guard, and, yes, fancy inlays on the neck and body. The Professional model 2671 was a Les Paul with a "vined" neck and a fancy headstock. But soon, the overall shapes of the guitars changed, and models known as the "Weir" (after Bob Weir of the Grateful Dead), "Artist" and "Musician" were introduced. By 1978, Hoshino had ceased production of all of its copy models and was truly producing 100% original designs. These guitars are not just beautiful, but are some of the best crafted guitars of all time, by any manufacturer, and represent the pinacle of guitar-making skill and quality.
Fuzz Box World – We are dedicated to bringing the highest quality components to builders of guitar and bass effects. We want to be the number one source of parts for electronics diyers. Whether you are a professional boutique pedal builder or a weekend hobbyist, your business is very important to us. We will do everything we can to make sure you are happy with your experience at Fuzz Box World.

Emerald City Guitars is the professional’s choice for guitar repair in Seattle! A partial list of some of our more well known clients: Bill Frisell, Billy F. Gibbons, Jimmie Vaughan, The Black Crowes, Pearl Jam, Jessica Dobson & Deep Sea Diver, Telekinesis, The Walkmen, Lynval Golding, The Supersuckers, Mudhoney, Randy Hansen, Death Cab for Cutie, Clinton Fearon, KD Lang, Henry Cooper, Alien Crime Syndicate, Orbit Studios, The Lonely H, Mars Hill Church, Fleet Foxes, The Magic Mirrors… and YOU!
Of course, any item is only worth what a willing buyer will pay to a willing seller. iGuide?is "just a guide." Please be aware that PRICES VARY WIDELY from region to region. Current estimated values are the result of much research. And we invite anyone to help add and update data. Read the "What's A Wiki" section below for more info on how to help.
SHEILDING Sheilding is good to use if you want to minimize that annoying buzz you can get from surrounding interference that electronic components such as amps can produce. You can use sheilding paint that is a bit more expensive but easier to apply than copper tape. All you do is paint it on and let it dry. It also gets into the areas tape can't reach. To install the tape you basically just apply it to the inside of the control cavity and solder up any seams that might let the interference through. The soldering can be a little tricky since you have to lay down a long bead of it along the seam. Kind of like welding. Here are some futher instructions After this is done you can install the pots and switch. Be careful when tightening them down not to scratch the finish. Add the knobs and get out your schematic for wiring it up.
Taylor also has a Build-To-Order program that allows anyone to design their very own guitar. There’s an extensive menu of guitar options starting from tonewoods, including species and grades that aren’t offered through Taylor’s standard line; inlay, binding and purfling options; finish options such as solid colors, sunburst, or vintage finishes; wood accents like a backstrap, armrest or truss rod cover; neck options such as scale length and neck profiles; and finally body shapes including the deep-body Dreadnought and the new Grand Orchestra.

Eric Clapton was in a bad mood during the photoshoot for Blues Breakers. The 1966 Clapton/John Mayall collaboration sees Clapton on the album art reading a copy of UK comic book the Beano. He was so aghast and bored by the idea of a photoshoot that day that he refused to make eye contact with the photographer, therefore settling on staring at a comic instead. Nicknamed “The Beano Album”, it’s often considered to be one of the most important guitar recordings ever made.
The Fender Tele Jr. is a variant of the Fender Telecaster electric guitar that the Fender Custom Shop produced in a limited run of 100 units in the early 1990s. It uses a Telecaster body shape, scale length, and electronics controls (albeit, with a reversed control plate). However, many of its construction and electronic features—for example its set-in neck and P-90-style pickups—are similar to those of a Gibson Les Paul Junior (hence the name) and Gibson Les Paul Special electric guitars.
Make your next guitar one of a kind. Every luthier set sold by OregonWildWood is visually unique and distinctive - even sets within the same species vary greatly in color, contrast and figuring. You'll find the largest online selection of guitar woods available - all special within their own right. All are exotic, beautiful, unique and superior. Each set is individually pictured giving you the opportunity to choose the perfect one for your next guitar.
I've been asked why it took so long to make this record. Well, it didn't really take too long to make this record. It took six months to make it. What I'd been doing before that was hopefully a journey I can continue. I guess what we play is still indie or alternative, I don't know all the different terms these days -- I've kind of lost track about what label I'm supposed to be these days. But it's still the kind of music I started playing when I was a kid, really. I'm fronting a band I could have fronted at fifteen or sixteen, so that's quite cool.
I am writing this due to the mixed reviews that I read before buying this. This is a really powerful device. I have had a POD 2.0 for years. This is just as good and is also small, portable, and inexpensive. Most of the criticism that I read is that it is not well made and durable. It is well made, but I don't think it is designed for gigging. It is perfect for practicing or interfacing with a home studio. If this is your application, then you will be very satisfied. One other thing that I found true of this and similar devices that I own is that the quality of the headphones makes a big difference. If you use studio quality headphones it will sound great, if you use music player headphones it will just sound good. I haven't ... full review
I have a Norma single pickup electric guitar with 1 volume and the 3 position tone switch. Someone tried to repair the wiring (w/o soldering) so it didn’t work when I found it. I did some simple wiring/soldering and got it working and the pickup sounds great but I cant figure how to wire it so the tone selector works. Any help or a diagram would be great.

The questions I get asked in response to people reading my stuff on guitar wiring often relate to the 5-way pickup selector switch so I thought I’d write a brief explanation of how it works. Understanding how the 5-way switch on your guitar works is key to successful guitar wiring. Knowing what goes on inside the switch may sound like a simple, maybe trivial, detail but it’s something we all need to understand and it’s not as easy as it first seems.
Electrical impedance is like two different sizes of hose. High impedance is like a garden hose, Low impedance is like a fire hose. The amount of water pressure coming through a garden hose is great for reaching your garden but if you need to run a long length of hose up the street, the pressure from a garden hose will give out after a certain distance. You definitely need that high pressure fire hose.

The Eastcoast Vintage T Series Custom Electric Guitar seen here in Flame Red is a cheap electric guitar that certainly doesn’t suck! It features appointments usually associated with higher tier guitars such as a solid alder body and hard maple neck. In addition, you have a high quality 22 fret rosewood fingerboard as well as 2 x single coil pickups to achieve a wide variety of tones from rock to blues to country – this thing can handle it all. The “T” style bridge is a great feature often found on guitars 3 x the price. A fantastic option and an extremely hard working, handmade guitar for those in need of a high quality first guitar or a great second option for the studio or stage.

In January 2017, Vox introduced the MV50 amp head and amp sets. Described by Vox as a hybrid amp, the amp heads are called the MV50 AC, the MV50 Clean, and the MV50 Rock. When paired with the BC108 cabinet, each is then described as the MV50 AC set, the MV50 Clean set, and the MV50 Rock set respectively. Vox states the MV50 AC is designed to provide the sound of a VOX AC30, and that the MV50 Clean is designed to provide clean tones with a lot of headroom as inspired by the sound of American amplifiers. Vox states the MV50 Rock is designed to provide the more aggressive high gain sound of vintage British amps. In January 2018, Vox announced two new MV50 amp heads: the MV50 Boutique and the MV50 High Gain.
The Squier Vintage Modified Jaguar Bass has major “cool” factor, and the sound holds out, too. With a P-bass style single in the neck position, and a J-bass style single in the bridge position, you’ll actually get the best of both worlds in terms of tonal options on the pickups. You have a choice between basswood (on the sunburst and crimson models) and agathis (on the black model), so there isn’t anything special about the woods they’re using in these basses. But the slim, fast-action, C contour of the maple neck will give you a nice, smooth J-bass feel that plays well above this guitar’s pay grade.
Arai, Aria, Aria Pro II, Aria Diamond, Apollo, Arita, Barclay, Burny, Capri, Cimar, Cortez (electrics only), Columbus, Conrad, Cutler, Dia, Domino, Electra, Epiphone, Granada, Hi Lo, Howard, Ibanez, Lindberg, Lyle, Luxor, Maxitone (this guitar differs from Tama's Maxitone badge), Mayfair, Memphis, Montclair, Pan, Pearl (electrics only), Raven, Stewart, Tempo, Univox ,Vantage,V entura, Vision, Volhox, Washburn, Westbury, Westminster, Westone

An instant classic, and an easy guitar song that offers a simple, repeated section of just a handful of dyads, or two-note chords. It is one of the most recognizable guitar riffs of all time and it’s great for beginners to learn. The entire section is played with just two notes per chord, and it’s a progression that keeps your fretting hand in just a single section of the neck. Once you learn this riff, it’ll be tough to stop, since it sounds so good, and it’s easy to play. 
The weapon of choice for today’s modern recording musician, the Axe-Fx is as good as it gets in terms of modeling amps. Used by countless musician both live and in the studio, this machine has proven to deliver for just about every musical style under the sun. Notable users of the Axe Fx include Alex Lifeson, Steve Vai, Misha Mansoor, and many others famous musicians. The Axe-Fx II features a high resolution speaker simulator with 150+ “Factory” models and room for 512 “User” cab locations.  It contains a vast virtual inventory of hundreds of vintage and modern guitar amps, speaker cabinets, guitar stompbox and studio effects, and more. The options are pretty much endless.

But here’s the thing: every single useful DAW is available for a 30-day demo or so. So you can at the very least try before you buy. The only downside is that some of these are only available in their full “pro” versions, so if you’re on a budget, you can get the 30 day (or more : REAPER has a 60 day demo and only costs $60 if you keep it, but I don’t know if you’d do live stuff with it… some of the fun will be figuring out all the tech).

Orville Gibson patented a single-piece mandolin design in 1898 that was more durable than other mandolins and could be manufactured in volume.[10] Orville Gibson began to sell his instruments in 1894 out of a one-room workshop in Kalamazoo, Michigan. In 1902, the Gibson Mandolin-Guitar Mfg. Co. Ltd. was incorporated to market the instruments. Initially, the company produced only Orville Gibson's original designs.[11] Orville died in 1918 of endocarditis (inflammation of the inside lining of the heart chambers and valves).[10]
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
Boutique quality instruments, available at prices that the masses can afford. Andrew strives to innovate with what he does with his instruments, from his unique bracing techniques, to the selection on soundboard woods to find the best wood grains for sound production. From his top-of-the-line custom made creations, all the way down to his Production series of guitars, you get so much bang for the buck.

A common issue for playing on larger stages or in studios is the distance between a guitarist’s pedals and their amp. Guitar cables that are longer than eight or nine meters (25 or 30 feet) not only degrade the quality of the signal, but also become incredibly susceptible to noises like hiss and hum. To allow guitarists to drive their signal over 100 meters (300 feet), Radial created the SGI-TX/RX™. The SGI changes the unbalanced guitar signal to a balanced line-level signal, altering the impedance for longer XLR cable runs; guitarists are able to use their amps offstage or in an entirely separate room when trying to craft the perfect tone.
In addition to the 1/4" input for your guitar, you may want to consider amps with better connectivity features like those with built-in USB output for direct recording, footswitch input, aux input for jamming with tracks, and headphone output. Speaking of headphone out, there are some amps that come with built-in speaker cabinet simulated outputs, this subtly changes the resulting sound much like the amp cabinet would without having to actually use the speaker. There are also a number of newer guitar amplifiers that come with Bluetooth connectivity for streaming audio and for software control.
A right handed 6 strings, electric guitar that mostly comes in black. The body is made from mahogany, while the fret board is made up of rosewood. The fret board is composed of up to 22 frets of 2.7 mm in size. It additionally has beautiful electric features such as a 3 way toggle and a push and pulls volume and tone. Price ranges from INR 21,400-21,541. Click below to get more product details.
Spanish-style electrics, which you could sling in front of you while standing and singing, proved to be much more versatile for many different musical genres. Gibson’s 1936 ES-150 (E for Electric and S for Spanish) had a sleek bar-shaped electronic pickup that was mounted into the guitar’s hollow body for a more streamlined look. The pickup earned the nickname “the Charlie Christian” thanks to the jazz virtuoso who is generally credited with introducing the electric guitar solo. In 1939, Christian stepped out in front of Benny Goodman’s band and performed long, complicated passages imitating the style of horn playing. He explained, “Guitar players have long needed a champion, someone to explain to the world that a guitarist is something more than a robot pluckin’ on a gadget to keep the rhythm going.”

Keep in mind that the year the guitar was built is no guarantee that any individual guitar is in the optimum condition required to handle steel strings. Any Martin should be evaluated with care, and a top that lifts significantly in the bridge area or this is not firm, is a sign that lighter strings should be used. Or that the guitar is in need of attention by a qualified repair person.

Guitar wiring refers to the electrical components, and interconnections thereof, inside an electric guitar (and, by extension, other electric instruments like the bass guitar or mandolin). It most commonly consists of pickups, potentiometers to adjust volume and tone, a switch to select between different pickups (if the instrument has more than one), and the output socket. There may be additional controls for specific functions; the most common of these are described below.

First of all, the staff are incredibly amazing, lovely, hilarious and helpful.  My bandmates and I are not the most knowledgable in terms of gear, and the first time we came in wanting to get our first our ever guitar petals, Blake actually drew a graph of sound to explain how guitar pedals worked. They are the absolute best. Helping us out and going above and beyond what staff should be expected to do.  Hands down my favorite guitar store in Seattle, great selection, prices and above all the attention to detail and friendly attitude of the staff.  Can't rave enough!  Definitely found my guitar store for life!  Would recommend for all your guitar needs :)
ARTIN IS NOT THE BEST ACOUSTIC GUITAR. Any Taylor of the same price range WILL BEAT THE BRAKES OFF A GUITAR IN THAT SAME PRICE RANGE! In fact, most profession guitar players switched from Martin to Taylor for that reason Dave Matthews Clapton jack Johnson BUT MARTIN OR TAYLOR ARE THE LEADERS IN THE ACOUSTIC GUITARS! Epiphone master built is another great choice if you are looking for a great 3-500 price range..the ONLY REASON THEY DONT COMPETE WITH MARTIN IS BC FEW PEOPLE KNOW ABOUT THEM! You can buy a Martin that sounds just same but you'll triple the price! Alvarez yari is another well built wonderful guitar but again &1000-1300 against the epiphone masterbilt. Low price great sound go masterbilt about anything else go Taylor

Rounding out our list of the best acoustic-electric guitars, the Yamaha L-Series LL6 is a functional, reliable and great-sounding guitar. The LL6 features a solid Engelmann spruce top that’s treated with Yamaha’s ARE (Acoustic Resonance Enhancement) technology. This gives the guitar the rich tone that you’ll only find on guitars that have aged for many years.
The 5150 III EL34 50-watt head downsizes EVH's high-gain format, and boasts three channels: channel 1 (clean) and channel 2 (crunch) share the same EQ but feature separate gain and volume controls on clever, dual concentric pots; channel 3 (lead) gets its own dedicated EQ. A global presence control on the front panel and a global resonance control on the rear panel tune the power amplifier’s high and low frequency response to taste. The 5150 EL34 also takes MIDI program change commands, so you can sync it to MIDI-compatible effects units and floor controllers. The EL34 version of the 5150 is important because Van Halen’s groundbreaking early work relied exclusively on heavily-modified Marshall Super Lead heads, which used EL34s. Sat firmly in hot-rodded Plexi territory, the 5150’s channel 1 is capable of sparkling cleans, with enough gain for mildly driven blues sounds. Channel 2’s higher gain is perfect for crunch and classic rock leads, while Channel 3 launches into the stratosphere with gain levels that are cheerfully insane, yet works a clever magic trick by retaining most of the dynamics that are often lost at such extremes. This means the 5150 sounds properly cranked up, even at quite low practice levels. EVH’s 5150 III 50W EL34 is a highly-effective weapon for the modern rock and metal player that puts tone before unnecessary complexity.

One and one half steps down from Drop D. This tuning is most often used by modern rock and heavy metal bands. Utilized by bands like A Day to Remember, Slayer (on "Cast Down", "Seven Faces" and "Payback" from God Hates Us All, as well as few songs on Christ Illusion, World Painted Blood and Repentless), Slipknot, Intronaut, Down, Machine Head (tuned 40 cents sharp), Demon Hunter, Chevelle, Origin, Asking Alexandria on their third and fourth albums, From Death To Destiny and The Black respectively, RED (on "Faceless"), Parkway Drive, Skillet (on much of Comatose), Veil of Maya, Bring Me the Horizon (up until Count Your Blessings), Sevendust, Soilwork, Chimaira (on a few songs from The Infection), Eye Empire, Crown the Empire, The Devil Wears Prada, Drowning Pool, The Veer Union, Comfort in the End, Attack Attack!, Mark Tremonti (on much of Full Circle and All I Was, and the songs "Coming Home" and "Home" from Blackbird and AB III, respectively), Nickelback on the song "Side of a Bullet", Disturbed on Immortalized and occasionally Black Stone Cherry, Limp Bizkit, The Kills, and Sucioperro.
Gibson announced a new interactive computerized Les Paul that produces more sounds, named the Dark Fire. It was released on December 15, 2007. The guitar has a computer integrated into the body and controlled by the “Master Control Knob” (MCK). The MCK allows players to change the pickups and coils, adjust each tone and tunings automatically and simultaneously, even during a song being played. Like the Robot, the Dark Fire features the ability to tune the guitar; however, in an improvement over the Robot, the player can tune it up to 500 times per battery charge, allowing the tuning pegs to adjust themselves to different tuning styles. Using the “Chameleon Tone Technology” Gibson claims this guitar will produce every imaginable guitar sound. In addition to the improved and advanced tuning features, the guitar has three types of pickups which include Burstbucker (humbucker), a P-90 single-coil and a bridge-mounted piezo acoustic, all of which contribute to organic blends of original sounds.
Bending: Bending is a pretty common element of Tab. You can tell that you are supposed to bend a note by an upward pointing arrow next to one or more numbers. The distance you are to bend the note will be defined by an indicator next to the arrow. It might be a “full” bend or a “1/2” bend. Once you are exposed to a couple of bends you will quickly catch on to the basic idea.
Matthias Karl Hohner, son of Dipl.-Ing. Matthias Hohner and a direct descendant in fourth generation and name bearer of the founder Matthias Hohner, was one of the last members of the Hohner dynasty involved in managing the family business, between 1968 and 1986. His son Matthias Francisco Hohner belonged to the first generation of direct descendants who did not enter into the family business. Many direct descendants of the founder are still active as members of the "Deutsches Harmonika Museum" and the "Hohner'sche Familienverein".
Yamaha’s Pacifica Series spans many ability levels and price ranges, with notable models such as the entry-level PAC112 proving one of the most popular beginner’s guitars on the market. Then there is the RevStar Series, which launched in 2015 – another beautiful collection, inspired by the street-racing motorbikes of London and Tokyo in the sixties.
{ "thumbImageID": "F335-Acoustic-Guitar-Black/512940000001000", "defaultDisplayName": "Yamaha F335 Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274115033905", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Black-1274115033905.gc", "skuImageId": "F335-Acoustic-Guitar-Black/512940000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51274115034006", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Natural-1274115034006.gc", "skuImageId": "F335-Acoustic-Guitar-Natural/512940000010000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tobacco Brown Sunburst", "sku": "sku:site51274115033955", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Tobacco-Brown-Sunburst-1274115033955.gc", "skuImageId": "F335-Acoustic-Guitar-Tobacco-Brown-Sunburst/512940000337000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
In the 1950's company called Don Noble and Co, was founded in the 1950’s by Don Noble, a well-known accordion player and entrepreneur.  He began by importing Italian made musical instruments, mainly accordions, in an era when the "stomach Steinway" was very popular and accordions were being sold door-to-door, and accordion academies were common in most larger cities. But he also imported guitars under the Noble brand name.
Fun !...Top 5...Such a good game I love it I would defiantly reccomend this game to all console users the graphic las the entertainment is just great you can play either online or offline so that's good so many different missions to play all at different difficulty so they ain't too easy but they also ain't too hard I ate this 5 stars for everything of people like shooting games car games then go get this game coz it is all of those things it is just excellent....The graphics are amazing though but I'm going to trade it in for something I enjoy more if this is your type of game I would recommend it but I mostly play games like Diablo and wolfenstein thought I might like it but don't and I don't have anything negative to say about it because it looks and plays great just not my cup of tea
I don't have enough good things to say about this shop.  Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings?  Well, this ain't that shop.  James, the owner,  is super helpful and knowledgeable, and stocks his shop with really top quality gear.  I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection).  That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well.  
Let’s face it, without people listening and responding to your music, there’s not much point in you throwing all you have into that hobby or business. Furthermore, it is relatively hard to be a passionate musician and to work in a more reliably financial-rewarding job alongside it, so one of your primary goals as a musician is bound to be to crack the music business and start making millions.
Patti Smith famously described Tom Verlaine's guitar sound as "a thousand bluebirds screaming." Television's leader soaked up the flavor of favorite records by John Coltrane, the Stones and the Dead – then synthesized them into something entirely new on the band's 1977 debut, Marquee Moon, spinning out endless fluid solos in concert with fellow guitar aesthete Richard Lloyd. Verlaine has kept a low profile in recent decades, but he remains a model for generations of guitarists with a taste for both punk violence and melodic flight.

One of  the most widely used guitars in jazz, the ES-175 is a semi-acoustic, hollow-bodied archtop that comes equipped with two humbucking pickups. The ES-175’s deep body produces the thick, dark sound beloved of jazz guitarists and the thin neck allows for fast chording and soloing. The bridge pickup is capable of producing a less jazzy, thinner sound, and ES-175s can be used in blues and rock.
Tremolo – Not to be confused with a tremolo bar (which is closer to the Whammy pedal), this effect works on volume. You can think of tremolo pedals as being like strumming a note, and then wiggling the volume knob on the amp while it’s ringing. Usually, the pedal will have controls for speed (equivalent to how fast the volume is “wiggled”) and depth (equivalent to how far the knob would be turned).
At the higher end of the market, you will definitely want to consider theGibson Memphis ES Les Paul Studio. A stunning marriage of the ES hollowbody and Les Paul solidbody shapes, this is a model that combines playability, power, sustain and tonal warmth to perfection. Equipped with ’57 Classic and Super ’57 Classic pickups and boasting solid construction throughout, the ES-Les Paul Studio is perfect for anything and everything you could imagine. Each model is supplied with a Gibson Memphis hardshell case to get you out and about in style.
Today's use of Torres and post-Torres type guitars for repertoire of all periods is sometimes critically viewed: Torres and post-Torres style modern guitars (with their fan-bracing and design) have a thick and strong tone, very suitable for modern-era repertoire. However, they are considered to emphasize the fundamental too heavily (at the expense of overtone partials) for earlier repertoire (Classical/Romantic: Carulli, Sor, Giuliani, Mertz, ...; Baroque: de Visee, ...; etc.). "Andrés Segovia presented the Spanish guitar as a versatile model for all playing styles"[5] to the extent, that still today, "many guitarists have tunnel-vision of the world of the guitar, coming from the modern Segovia tradition".[6]
1939: The #1 brace inside near the neck block changes from 5/16" wide to 1/2" wide, making it roughly twice as wide. This happened at the same time as the popscicle brace addition. The neck block thickness was also reduced by 1/4". About the same time neck width reduced from 1 3/4" to 1 11/16" at the nut, and the bridge spacing reduced from 2 5/16" to 2 1/8".
Seller: bennick2013 (4) 100%, Location: Marietta, Georgia, Ships to: US, Item: 302905274242 Beautiful red body and maple neck looks great despite minor dings and scratches. Neck is straight and intonates well, action just fine with no divots or dead spots. Get it now before they become scarce and PLAY Condition: Used, Condition: Very Good, Brand: Lotus, MPN: Does Not Apply, String Configuration: 6 String, Body Type: Solid, Body Color: Red, Model: Strat, Model Year: ? See More
The Fender Deluxe Players Stratocaster Electric Guitar gives you classic Strat sound and feel in a beautiful package. This luxurious model is upgraded with American-made Vintage Noiseless pickups, medium-jumbo frets, and a 12" neck radius. As a result, it sounds fantastic and plays easy. It also is equipped with a push-button pickup switch (in addition to the usual toggle) that gives you 7 pickup combinations. Other deluxe features include a vintage-style synchronized tremolo, vintage-style tuners and gold-plated hardware throughout.
In the Spring of 1960 the Kent Musical Instrument Company (20 East 15th Street, New York City) was founded as a subsidiary of prominent New York distributors Buegeleisen and Jacobson. It’s first products were microphones, cables and aftermarket guitar accessories like pickguard/pickup assemblies for archtop guitars and soundhole pickups for flattop acoustics. In 1960 the Marco Polo Company (1055 E. First Street, Santa Ana, CA) began importing Japanese guitars (many by Suzuki), including electrics, which it began to advertise in 1961. Kent began promoting Japanese solidbody electric guitars (mainly Guyatones) in April of 1962, although by the Fall of ’62 the Kent Standard series consisted of Teisco models.

Welcome to Part 1 of a new Gibson series that will dissect a different breed of effect each week, to tell you—the player—what each does, and how it does it. Effects pedals can be divided into a range of categories of types, but there are undeniably some gray areas between these, since different designs will achieve their sonic ends via different means. The distinctions get blurrier when we throw digital technology into the brew. An analog and a digital chorus, for example, are very different circuits, approached—from the design perspective—from very different standpoints, although the sonic results may sound roughly similar (in the good ones, though, the subtleties are usually quite distinctive).

An acoustic guitar suited to bluesy rhythms. Has quite alot of fret rattle with the high velocities but also a certain amount of mid to high frequencies which helps to give it its own place in a mix. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them.
Now, there are some basic terms in the electric guitar lingo that you need to be aware of. Below are some of the terms that you need to know before you go out and research about different electric guitars. But if you are musically inept, there are some ways you can compete with the guitar guy. If you learn some points about the electric guitar, such as terms and mechanics of the instrument, you can impress your friends and possibly even will be the guy holding the guitar at your next dinner party.
Wah pedals can sound eerily similar to a human voice, and they were actually a favorite of Jimi Hendrix, who many have said possessed the most expressive guitar playing amongst all the great guitarists. Wah pedals are great to activate right when you’re about to take a solo and when you really want to make it sound like you’re speaking with the guitar.
Neutrik has been making superior electronic interconnection products since 1975, making them the logical choice to supply the performance safeguarding jack in Gibson’s 2008 Les Paul Standard. Like many Neutrik products, the jack in the 2008 Les Paul Standard is manufactured from strong, high-grade thermoplastics and housed in a rugged diecast nickel shell. A retention spring inside the jack ensures optimum grip on any guitar cable, thus avoiding the chance of lost connection.
Kay/Valco went out of business soon afterwards, and in 1969 its assets were auctioned off. Syl Weindling and Barry Hornstein of W.M.I. (the main importer of Teisco Del Rey products) purchased the Kay brand name during this time. As a result of this, the names "Teisco" and "Kay" were used on Teisco Del Rey guitars for a while in the early 70's. In 1980 the Kay Guitar Company was purchased by Tony Blair and is currently active selling Kay brand and Santa Rosa brand guitars, Chicago Blues harmonicas and accessories and of course the Kay Vintage Reissue line of professional guitars and basses.
Mother-of-pearl rosette inlay. If you’ve had acoustic guitars with mother-of-pearl accents, you’ll appreciate the beauty of the mother-of-pearl inlay around the sound hole. This particular rosette pattern is inspired by the 1920’s Domingo Esteso design, which will be a treat for those who love specific historic details like this. Even if history isn’t your concern, the mother-of-pearl colors enhance the pattern.

{ "thumbImageID": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000", "defaultDisplayName": "Takamine G Series GD30CE-12 Dreadnought 12-String Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000034308", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "769.99", "priceVisibility": "1", "skuUrl": "/Takamine/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black-1500000034308.gc", "skuImageId": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Black/H99532000002000", "brandName": "Takamine", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51372692952068", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "769.99", "priceVisibility": "1", "skuUrl": "/Takamine/G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural-1372692952068.gc", "skuImageId": "G-Series-GD30CE-12-Dreadnought-12-String-Acoustic-Electric-Guitar-Natural/H99532000001000", "brandName": "Takamine", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

The first burst of interest in Explorer-style guitars in the 1970s, led by players such as Rick Derringer and Sammy Hagar, was followed by a hiatus at the end of the decade when guitarists followed an Alembic-style lead. However, natural-finished neck-through guitars with sophisticated electronics didn’t cut it with the heavy metal bands that became more popular in the early 1980s with the New Wave of British Heavy Metal and the subsequent American response, chiefly out of Los Angeles. Poofy hair and skin-tight spandex begged for guitars with in-your-face style. The radical Explorer shape was perfect for making the right kind of personal stage statement. Manufacturers jumped on the bandwagon. Baby Deans, Ibanez, Aria, Cort… Even Gibson offered Explorers in cool custom graphics.
Having perfected the modelling amp concept, Line 6 have become experts at delivering a huge variety of great sounds in a convenient, affordable package. Experiment with 12 different amp models, from classic 1960s Fender tone to the “Insane Red”, inspired by the mental Mesa/Boogie Dual Rectifier, and sculpt your tone further with the seven built-in effects.
The design goal of these hybrid micro heads was to provide usable power from a compact digital power amp section combined with a real analogue preamplifier in a very small and light metal chassis. The amps each weigh about 1.1 lbs, and fit in one hand (Dimensions (W x D x H): 135mm x 100mm x 75mm/5.31” x 3.94” x 2.95”). These amps are advertised as 50 watt heads, so the power section is a special Class D design as might be expected. What is unexpected is the preamp design that includes a new type of vacuum tube (valve) called the Nutube 6P1, which is the result of Korg working with Japanese vacuum fluorescent display (VFD) company Noritake Itron Corp.(Ise Electronics Corp). As such, the Nutube is a dual-triode vacuum tube packaged similarly to a VFD "chip" which makes it mountable on a circuit board using holes and pads not unlike a DIP. The miniaturised flat package topography, low power consumption, and low heat, long life attributes of the Nutube are key contributors to deploying an analogue tube preamp in such a small, lightweight footprint. Power consumption is only 3.43 Amps which is provided by a DC19VAC adapter, but Vox rates the MV50 power output at 50 Watts. However, note the 50W rating is for a 4Ω load; power output specs are as follows: Max 50W RMS at 4 Ohms, 25W RMS at 8 Ohms, 12.5W RMS at 16 Ohms.
If this were a list of the best electric guitar brands for metal it is very likely Jackson would be near the top. This is a company practically synonymous with metal, and for decades the most extreme players on the planet have looked to Jackson to get the job done. But Jackson also has a strong presence in the rock and hard rock genres, and if that’s your bag you’d be smart to give them a good look.
The Basic Principles: A Valve is an extension of the light bulb. Theoretically inside the valve is a vacuum. The hot filament is called ‘Cathode’ (Let’s not forget a T.V. is a’ Cathode ray tube’ ). Around the outside of the Cathode is a cylindrical metal tube called ‘Anode’. When a +Voltage is placed on the Anode and a -Voltage placed on the Cathode, a large current can flow between them, but not the other way around.
These electric guitar tone tips from Guitar Control are money saving and time saving tips you can use to create great guitar tone without investing in anything other than the guitar you already own. Your volume control, your tone control, and your switches are a wealth of guitar sounds. Also, the way you play your guitar -- the dynamics. All of these elements can be used separately or together to build guitar tones into any of the solos you play. This is an awesome lesson for beginners because you can put these tricks to work immediately to get the results you’re looking for, and if you’re short on cash, these guitar tone tips will allow you to express yourself with tone without having to spend money.
A touring pro friend of my was given one of these years ago by the McPherson company as a promotional endorsement for him to play on stage. After playing his I have wanted one for years. They are indeed expensive, but recently I was able to purchase one. In my 45 years of playing I have always gone through multiple examples of each guitar I've owned before purchasing, and have (and do) own Martins, Taylors, Gibsons, Tacomas, Fenders, Seagulls, Alvarez, Yamaha, etc. which were all really good in their own right. However, nothing I've played has been as good as the McPherson in terms of tone, volume, sustain, note clarity, playability, workmanship; it's useful whether played solo or in an ensemble setting, and for chords or single line playing. It is indeed the last acoustic guitar that I will ever buy.
Different types of guitars have different sound aesthetics, e.g. different colour-spectrum characteristics (the way the sound energy is spread in the fundamental frequency and the overtones), different response, etc. These differences are due to differences in construction; for example modern classical guitars usually use a different bracing (fan-bracing) from that used in earlier guitars (they had ladder-bracing); and a different voicing was used by the luthier.

learning how to play songs on guitar is not necessarily the same as learning how to play guitar. If your just repeating something without understanding it, your not learning. If you are one of the very few who can instinctively play, learn songs and teach yourself simply by doing- then it doesn't really matter- many (of the few) really successful musicians have done it this way. In most cases, a beginner should do both- learn the chords and the theory pertaining to the songs you want to play, so you can more easily connect the learning to the playing. One thing is for sure, you're not going to be able play very many songs without first knowing at least your 7 basic major and minor chords and some basic rhythm patterns. All the other primary chords (7 / 9 / 11 and 13's) are all built off these 7 basic major and minor triad structures. it's all up to you as to how much effort and time and how far you want to go with it- in any case good luck and have fun with it
Nitrocellulose lacquer is prized as a coating by some guitarists as it is thinner than some other coatings, which some claim leads to a better sound (though we’re not going to wade into that argument here). It’s also easy to blend with paints, and easier to repair. It does have its downsides, however. The solvents used in the lacquer can be potentially damaging to the respiratory systems of workers applying the coating during the guitar’s manufacture, and for this reason other options were sought.
Although fairly small in size, this packs a serious punch thanks to the overdrive control which can produce that classic orange crunch to smooth and creamy British distortion. The Orange Crush 12 is definitely a great small gig and rehearsal amp, but it also makes a fantastic amplifier for practice at home thanks to the headphone/line output which features the Orange CabSim technology. This allows you to plug your headphones in and enjoy a faithfully emulated sound of a mic’d Orange 4×12" cabinet directly to your headphones – ideal for silent practice. This can also be used in conjunction with your audio interface for direct recording and the capturing of authentic Orange tones without dragging a massive cabinet into a room (or destroying your windows!).
Effects units are available in a variety of formats or form factors. Stompboxes are primarily used units in live performance and (in some cases) studio recordings. Rackmount devices saw a heavy usage during the later 20th century, due to their advanced processing power and desirable tones. However, by the 21st century, with the advant of digital Plug-Ins and more powerful Stompboxes for live usage, the need and practicality of rackmounted effects units went down, and as such, prices of rack effects have diminished due to lower usage.[5] An effects unit can consist of analog or digital circuitry or a combination of the two. During a live performance, the effect is plugged into the electrical "signal" path of the instrument. In the studio, the instrument or other sound-source's auxiliary output is patched into the effect.[6][7] Form factors are part of a studio or musician's outboard gear.[8]
Another great thing about this guitar is the Min-ETune system that offers 16 tuning presets. This not only makes it super quick to tune your guitar for everyday use, it’s also great if you need to tune your guitar up or down. It saves you a lot of work and time! It’s also a feature that makes these electric guitars for beginners who don’t know how to tune their guitar, and even if they of course can use a tuner this is still a faster option.
Had a seven string Ibanez with loose/worn frets worked on. Steve knew right away that the frets had to be tacked and it could use a fret re-crowning and gave me a quote for 125$. I thought it was a bit high but trusted him because of the good reviews. Came back a couple weeks later and he had re-crowned the frets, tacked all the loose frets, tightened down some more loose hardware and did a set-up for only 100$. I am overall quite satisfied with the quality of the work and the pricing. I will be going back to have my acoustic worked on.
Next models is another semi-hollow design, only this time we are looking at a bit more neutral guitar. I wouldn’t go so far as to say that it’s somewhere between a solid body and a semi-hollow. That would simply be wrong, but it does have a harder tone for a model of this type. It didn’t take me long to find the right setup, and off we went. Sound, playability – everything is on point.

Phrase sampler: Like a loop pedal, a phrase sampler will store loops or phrases of even greater length. The more expensive and sophisticated phrase samplers will save multiple phrases or loops, drum and bass, rhythm guitar, or practice solos. Some have USB connectivity and can hook up to your computer for uploading, so you never lose a loop or phrase.

The positions (that is where on the fretboard the first finger of the left hand is placed) are also not systematically indicated, but when they are (mostly in the case of the execution of barrés) these are indicated with Roman numerals from the first position I (index finger of the left hand placed on the 1st fret: F-B flat-E flat-A flat-C-F) to the twelfth position XII (the index finger of the left hand placed on the 12th fret: E-A-D-G-B-E; the 12th fret is placed where the body begins) or even higher up to position XIX (the classical guitar most often having 19 frets, with the 19th fret being most often split and not being usable to fret the 3rd and 4th strings).
In 1981 Fender-CBS hired William Schultz, John McLaren, and Dan Smith away from the U.S. division of Yamaha. Schultz became the president of Fender-CBS, McLaren the managing director while Smith was appointed the director of marketing for Fender electric guitars. In a drive to rejuvenate the quality control and Fender’s market position, Dan Smith oversaw an upgrading of the basic production model Stratocaster and by late 1981 the new production model was unveiled as the 1982 Stratocaster. It featured a pre-CBS smaller headstock (compared to the 1980 “Strat”), a four bolt neck plate, an overwound X-1 pickup (introduced on the 1980 “Strat” model) in the bridge position and a body end truss-rod adjustment without the Bullet nut. These are known today as “Dan Smith” Stratocasters and prized by collectors for the attempted, albeit brief, return to pre-CBS stylings.
ASIO drivers do a bunch of things. For one, your DAW talks directly to an ASIO driver, no going through the Windows Mixer and actually bypassing a bunch of other Windows stuff you can’t see. The ASIO driver itself is very efficient. And native ASIO drivers allow you to adjust the buffering on that interface. If you’re working a DAW with 64 tracks of audio going to and from hard drive, you may need to add some “buffer’ memory to keep everything working, because computers are way better at doing a fewer big things than lots of little things. But if it’s just your guitar playing live, you can dial down to minimum buffering to make the delay through the PC as small as possible.
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
I'd never heard of this brand but was recently in a store in North Carolina looking for a nylon string guitar. The salesman asked me if I was "open minded" and if I'd be receptive to trying a brand that I probably had never heard of. He handed me a really pretty instrument with a very different looking headstock. I immediately figured he was showing me a very expensive instrument. I asked how much it cost, but he didn't answer. He simply replied "Try it, then let me know what you think." I had no idea how much this guitar would cost, and honestly I hate guessing games, but the guitar was really beautiful. I played several classical guitars there that day. A Yamaha, a Cordoba and an Alvarez, but the Merida was unquestionably the best sounding (and looking).
We’ve already made numerous allusions to the “split” between Merson and Unicord, so now is probably a good time to talk about it. At some point (almost certainly 1975), Ernie Briefel of Merson decided to part company with Sid Hack’s Unicord. 1975 is the logical choice because flyers copyrighted 1975 are still identified as from Merson Musical Products, a Division of Unicord, Inc, a Gulf + Western Systems Company. All flyers from ’76 on are copyrighted by Unicord, Inc., a Gulf + Western Manufacturing Company. Briefel’s Merson subsequently relocated to Long Island and became Music Technology, Incorporated (MTI). This company took the distribution of Giannini guitars with it.

Stay tuned for the second part of our series/parallel discussion next month. We’ll pick up the soldering iron and explore some sweet parallel/ series switching options for our Strats. This will also close out our run of Stratocaster mod columns. When we finish the series/parallel discussion, we’ll switch over to Telecaster and Esquire mods. Until next time, keep on modding!
I have never reviewed anything, however felt that I had to share that this is a complete disappointment. I bought it two weeks ago for my daughters birthday and it is already broken. The mechanism to plug the amp line/chord into the guitar broke, rendering it useless. The amp itself is very cheap and the sound quality was a disappointment, crackling when in use. The strap has holes that connect the strap to the guitar, were too big and would not stay fastened so I had to tie the strap with rope to see that it stayed on while she played.
Here we have a matching quad of late sixties Goodman speakers with green labels 25 Watts each @ 12 ohms Very rare in that EACH driver is fully functional, the cones are nice and stiff, no cone rub or any tears, just a killer set of vintage speakers. These came out of a wem cab and were also stock in laney cabinets(think sabbath tone, wem, Burman and Selmer gear Wem used odd impedances, these read 10.01 ohms on my multimeter so is treat them as 8ohms if they are wired up in a cab series parallel. Postage in the U.K. is £32 and they will be sent out in two separate parcels, you will have to arrange your own courier if your not U.K. based you can also collect in person! Any questions just ask
Description: Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: Humbucker - Pickup Configuration: H-S-H - String Instrument Finish: White, Black, Red, Sunburst
If you are a beginner, you may have heard of electro-acoustic models. In the future you may want to consider one of these, as they will allow you to plug into an amplifier and project your sound across a room, concert hall or stadium (well, you have to dream big!). However, for now it’s wise to stick with a solely acoustic model, which will be cheaper and less complicated to use.
There was a question from Benhur about Cort. If you lived in England you may know them better. They are an Indonesian company who builds many of the lower price point guitars for the big names like G&L and Fender just to name a. Few. Lower price doesn’t always mean less quality. Cort has a following in their own skin, and many with other well known names just may not know they are playing a Cort.
There is competition for Guitar Tricks and this is a good thing, as this makes sure that they have to keep improving. Prior to starting with Guitar Tricks I bought some lessons from True Fire. While the lessons were good and very well presented they needed to be downloaded onto a PC and could only be played in a special player program. TrueFire also offer an online service that includes group and one-on-one lessons.  Another alternative worth checking out is JamPlay. JamPlay has been continually gaining ground on Guitar Tricks and is worth while checking out. They do not have a free trial period, but you can get started with a very low amount for the first month and they also have some free lessons. Another option is a fairly new program called Infinite Guitar. They seem to be doing a rather good job too and also offer some free lessons.

Without a doubt, dont even entertain the idea of getting one, I was given one by an unfortunate friend who bought one, to try and get it to at be semi playable.. the necks are not even straight, in fact , you could ski off them.....the frets stick out from the side of the neck, the strings are so far off the neck you cannot even fret them down.... There must be no quality control whatsoever in the factory..
{"pageName":"[gc] pdp: washburn xmdlx solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","products":";114096449;;;;evar65=null-Guitars-Washburn","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
Humbucker pickups were designed to deal with hum while also offering tonal characteristics beyond those of single-coil models. This design incorporates two single-coils wound together in series, with the polarity of the magnets arranged opposite each other. This design helps to eliminate hum. Hence it’s name. Humbuckers usually have a thicker, louder, more powerful tone when compared to single-coils. While they are very versatile, humbuckers lend themselves to rock, heavy metal, and jazz styles. Famous guitarists who use humbuckers include Slash, Jimmy Page, Joe Pass, and Duane Allman.
Generally, guitarists with an array of pedals like to put their drive pedals first. This includes your overdrive, distortion, fuzz, or boost pedals. Some guitarists have more than one of these, and they usually go at the beginning of your chain. The reason for putting them first in your pedalboard order is because you will be distorting or boosting the purest version of your guitar tone. Putting a delay pedal before distortion means that the echoes from the delay pedal would themselves become distorted, resulting in an unnatural and messy sound. If you’re using an overdrive and a boost, it’s wise to put the boost first – that sends a stronger signal into the overdrive to get the most out of it.
Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: Some great info on that site, you should have a browse around!
Straight away meeting the essential criteria and tonal platform for a good small solid state combo amp for practicing at low volumes with a pocket friendly price tag is Orange Crush 20RT. This dual channel 20 watt guitar amplifier that also comes in a 35 watt version is the upgraded model of the well received Orange Crush 20 for having a built-in spring reverb effect and a chromatic tuner which are the kind of features great for daily use.
Yngwie Malmsteen released his Concerto Suite for Electric Guitar and Orchestra in 1998, and Steve Vai released a double-live CD entitled Sound Theories, of his work with the Netherlands Metropole Orchestra in June 2007. The American composers Rhys Chatham and Glenn Branca have written "symphonic" works for large ensembles of electric guitars, in some cases numbering up to 100 players, and the instrument is a core member of the Bang on a Can All-Stars (played by Mark Stewart). Still, like many electric and electronic instruments, the electric guitar remains primarily associated with rock and jazz music, rather than with classical compositions and performances.[37] R. Prasanna plays a style of Indian classical music (Carnatic music) on the electric guitar.