Most pedalheads consider the Ibanez TS-808 Tube Screamer and, to a slightly lesser extent, the TS9 which followed, to be the grandaddies of overdrive pedals—and, yes, they certainly generate an element of distortion, too. Indeed, more boutique overdrives are based on the late-1970s and early-’80s Tube Screamer template than on any other, but despite the claimed improvements and undeniable quality of many of these, original units still usually fetch far higher prices on the vintage market (ain’t it always the way?) than new units do in the stores. With all of these—and other vaguely similar units—the guts of the sound comes from a clipping amp based around the first section of a dual opamp (purists swear by the JRC4558 chip in the early Ibanez units) and a pair of clipping diodes, with transistorized buffer stages at both the input and output, and a section for tone-shaping and output level control which uses the second part of the dual opamp in conjunction with a network of capacitors and resistors.
Ovation makes a great acoustic electric that is only $469. It has a spruce top with a lyracord bowl back. Some people don’t like the rounded back as it’s hard to keep it in your lap, so a strap may be needed if you should choose this guitar. The onboard pre amp has a built in tuner which makes staying in tune very simple. It’s nice not having to keep up with a separate tuning device. The reviews for this guitar are positive, citing great tone and playability. Click here for more information and pictures of this guitar.
In 1958, Gibson updated the Les Paul yet again. The new model retained most of the specifications of the 1957 Goldtop, including PAF humbucker pickups, maple top, tune-o-matic bridge with a stop tailpiece or Bigsby vibrato tailpiece. The most significant change in the new models was the finish. The Goldtop color used since 1952 was replaced by the Sunburst finish already being used on Gibson’s archtop acoustic and hollow electric guitars, such as the J-45 model. To differentiate from the earlier Goldtop model, the new Les Paul was referred to as The Les Paul Standard. Original production of the standards lasted from 1958 to 1960. Only 1,700 of these early models were made and have subsequently become highly collectible.[note 6] Original production ended when, in 1961, Gibson redesigned the Les Paul to feature a “double cutaway” body, which has subsequently become the Gibson SG. Due to high demand, Gibson resumed production of Les Paul Standards in 1968. Today, the Gibson Les Paul Standard has BurstBucker pickups on the Vintage Original Spec models and Burstbucker Pro on the lower end models bearing the ‘Standard’ name.
{ "thumbImageID": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "defaultDisplayName": "Fender Kurt Cobain Jaguar NOS Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst Rosewood Fingerboard", "sku": "sku:site51398177063833", "price": "1,224.99", "regularPrice": "1,224.99", "msrpPrice": "1,225.01", "priceVisibility": "1", "skuUrl": "/Fender/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard-1398177063833.gc", "skuImageId": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Welcome to the world of premium! While there are several tiers of boutique amplifier priced higher than $1000, this category is when you really start to hit the high end. Some of the most iconic guitar amps sit in this section, although all models are capable of performing on big stages and professional recording studios with pro-grade features, exceptional tones and massive power, extending into 100 watts and above. One amp you will find in this market is the legendary Peavey 6505 Plus head, which has helped shape the sound of metal over the past few decades.

Guitar chords and signatures. Find and save list of chords. Basic guitar chords A sheet of the most used rock chords. Suitable for beginners. Empty chord sheet An empty sheet of chords templates to print out and use. Basic guitar chords Em, C, G, D, Am, E, and A Free lesson on the basic guitar chords Em, C, G, D, Am, E, and A. The following chords are 7 of the most basic open position chords. An open position chord is one that contains at least o
Most Gibson guitars feature two humbucking pickups, giving them a very full, clean sound. They are very simple in design, and easy to use with a focus on quality. Maintenance is also easy with Gibsons. Their bridge style places the strings closer together than the likes of Fender or Ibanez guitars, making them slightly different to play. While there is slightly less room for error in finger placement, the strings’ proximity makes them a better fit for small hands and for instrumentalists who need to rapidly navigate the fretboard.
"Acousterr's tab maker is a tablature maker application which can be used to write down and compose music. Users can create tabs, play them out, explore tabs created by other users. They can choose any instrument like guitar, bass guitar, piano, ukulele. The sounds are mathematically modelled to be generated at runtime for any combination of notes and effects like hammer on pull off etc for different types of instruments. This gives a beautiful listening experience. Multiple tracks can be added in a single tab which play out simultaneously, so as to simulate an entire song with various parts like bass guitar, lead guitar, rhythm guitar etc. The UX for editing multiple tracks has been meticulously designed to allow tab lines to synchronise easily. With great keyboard support, notes can be easily added and chords can be created on the fly by pressing shift key and selecting multiple notes. Scale helper is there to allow composing solos easily. Designed to work well on mobile browsers too."

These are the most versatile 5 position switches around. They have 4 poles, each pole has one common and 5 switched terminal which makes a total of 24 terminals. With that many connections you can wire pretty much any pickup combination you can imagine. Poles are mounted on two wafers, two poles each. Common terminals are usually the outer two terminals on each wafer. Image below shows multipole switch, two poles on the front wafer are outlined with different colors.
Certainly, the response to these innovative guitars at the time gave no indication. They tanked pretty quickly. No one has ever even seen a real Moderne, and players didn’t warm up to the Explorer and V until the 1970s. These models even inspired at least two new American brands – Hamer and Dean – both dedicated to making “improvements” on the Gibson originals. Japanese manufacturers also picked up on the appeal of these designs.
One glance at this bad boy reveals just how accurate it is to the 1959 version. We are talking exact same tubeless truss rod assembly, aniline dye, exact same finish... everything. In terms of hardware, they went with a set of Klauson Deluxe tuners and period specific Tune-o-Matic bridge. The custom humbuckers were coiled and voiced to perfectly match the original PAF design from the late '50s which was done using Alnico III magnets and 42 AWG wire. The performance of this guitar is an experience that is rarely found out there.

The guitar's history mirrors the cultural values, preoccupations, and norms in the United States over time. So, too, does the guitar's design, especially since the development of solid-body guitar construction by the 1950s. Because the sound produced by solid-body electrics does not depend on their shape, makers could experiment with a wider range of guitar designs. This era's seemingly radical instruments echoed the popular cultural focus on space-age modernity. The Fender "Strat" recalled the modern tail fins and imaginative colors of Detroit's cars, while the Gibson Flying V literally appeared ready for takeoff.
Twelve-string guitars produce a brighter and more jangly tone than six-string guitars. They are used by guitarists for chord progressions that require thickening. The twelve-string is mainly used as a rhythm instrument due to the extra effort involved in playing lead guitar using paired strings. Twelve-string guitars have twelve tuning pegs and double truss rods and are slightly more expensive than their corresponding six-string version.
Lastly, if you fancy yourself the next Slash, Jimmy Page, or Pete Townshend… you’ll want to pick up a Les Paul style guitar. It’ll get you that classic rock sound that you’re looking for. Les Pauls are equipped with “humbuckers” which produce a fat, meaty sound that’s rounder and less sharp than the single-coil pickups of a strat. The signal is also stronger so you’ll get more sustain.
MIDI connectivity has also been included, allowing you to take control of your existing synth or sampler with ease. In addition, the Helix features a 6.2 inch 800x480-pixel LCD display for easy editing, customisable scribble strips above the 12 capacitive-sensing footswitches and an expression pedal that can actually be used to edit parameters of a pedal so you don’t have to bend down and start twiddling knobs. Best of all, you can even integrate existing hardware and effects pedals in to your Helix and control them through the unit. We could talk about how this is one of the kings of the multi-effects world all day, but just watch the video below and see for yourself!

Many players today have more than one overdrive/distortion stomp box on their pedal boards and sometimes use both at once. My personal preference is to place the lower gain pedals in front of the higher gain ones, but the opposite is absolutely fine if you prefer the sound of that configuration. Placing overdrive/distortion pedals later in the signal chain can increase noise as the noise of several effects chained together can add up, and any noise produced by other effects going into an overdrive/distortion effect will be boosted along with the guitar signal.

Delay pedals take your original signal, a guitar chord or note for example, delays it and plays it back exactly how the pedal hears it the first time. It can either play the note back once or multiple times depending on your settings or “feedback time”. Often, you’ll see Digital Delay pedals as well as Analogue Delay pedals. The major difference is that digital delay pedals will offer longer delays and a ‘cleaner’ exact sound, however guitarists often prefer the analogue sound for all the subtle nuances and slight unpredictability in sound. This comes down to personal preference but both options sound great.
Guitar amplifier design uses a different approach than sound reinforcement system power amplifiers and home "hi-fi" stereo systems. Audio amplifiers generally are intended to accurately reproduce the source signal without adding unwanted tonal coloration (i.e., they have a flat frequency response) or unwanted distortion. In contrast, most guitar amplifiers provide tonal coloration and overdrive or distortion of various types. A common tonal coloration sought by guitarists is rolling off some of the high frequencies.
Because IRs can be recorded in virtually any space, convolution reverbs generally come with a library of IRs ranging from small live rooms to famous venues, top studio rooms, forests, canyons, railway stations and just about anything else you can think of. They sound very convincing, and there's plenty of variety to be had, but once the IR is loaded, there's only a limited amount of editing you can do without spoiling the natural sound. Usually you can apply EQ and also change the envelope of the reverb decay to make it shorter, and adding pre-delay is not a problem, but after that you pretty much have to take what you get. Some companies, such as Waves, have managed to create additional controls but, as a rule, the further you move from the original IR, the less natural the end result.
Martin is an American guitar company specializing in acoustic guitars. Most of their instruments are still built at their facility in Nazareth, Pennsylvania, and their legacy dates back all the way to 1833. Martin, in many ways, has helped to shape the look and sound of the American acoustic guitar. In fact, they invented the now-classic dreadnought shape in an effort to help American country musicians who wanted more projection out of their guitars onstage.
Keep in mind that the year the guitar was built is no guarantee that any individual guitar is in the optimum condition required to handle steel strings. Any Martin should be evaluated with care, and a top that lifts significantly in the bridge area or this is not firm, is a sign that lighter strings should be used. Or that the guitar is in need of attention by a qualified repair person.
This guitar follows traditional Martin specs with a 25.4" scale length and a 1.75" nut width, and they also gave the neck and ebony fretboard a worn-in feel that makes the guitar play extremely well right out of the case that it comes with. On top of its true to form vintage sound, playability and looks, the OM-28 E Retro is equipped with the extremely versatile Fishman F1 Aura Plus, which offers three acoustic voicings modeled from actual Martin Museum guitars. If you play various musical styles and you're looking for a be-all and end-all acoustic guitar, you will be blown away by the OM-28 E Retro.
At first the company produced high-quality acoustic instruments for students and working professionals, aiming at providing good value for money and experimenting with the use of Australian woods. In the 1960s they expanded into electric instruments and instrument amplifiers, at first under the nameMagnetone. The early catalogues noted that the warranties on amplifiers and loudspeakers were void if used in situations of “overload or distortion“, reflecting Bill’s jazz background but still incredible to modern electric guitarists of any style.
The Matsumoto Musical Instrument Manufacturers Association was the organization responsible for Fresher guitars. Little is known about this association, other than it did not have larger guitar manufacturers Matsumoku or Fujigen Gakki as members. Nakai Gakki was a possible member of the association. Fresher guitars began production in 1973 by the Kyowa Shokai Company, an association member, which was also responsible for the Camel badge. It's interesting to note that Fresher guitars were eventually being produced by Chushin, which leads me to believe that they may have been an Association member along with Kyowa. The beginning production year was considered a low quality benchmark for the company. The Fresher brand continuously improved in quality until 1980.
Reamping was originally invented as a creative tool. Instead of spending hours crafting the perfect guitar tone before hitting record, the dry signal from a DI is recorded and later “reamped”, saving time and letting the guitarist focus on nailing the performance. This allows the engineer to send the recorded dry signal through guitar amps or tone shaping devices during post production, eliminating the need for the guitarist to be present.
There is clearly a great deal that the guitarist can do for the sound by changing guitars, strings and amps, but from the perspective of the recording engineer it's also important to think about how the guitar cab is interacting with the room it's in. For example, Roy Thomas Baker mentions that he sometimes sets up the same guitar cab in different rooms because of the effect on the sound. Even if you're restricted to one room, a number of producers suggest trying out different positions of the amp in the room. Tony Visconti: "It's not so much that you're miking a guitar — you're miking a guitar in a room. I had a cellist in here recently, and I moved her until I got a good sound. Once I put her in one particular corner, her cello just sang — the room just filled up with the low end, and the sound exploded! A person who hasn't had years of experience might not have thought of doing that, but I could tell there was something lacking when she was in the centre of the room. That's mic technique. It's not so much the instrument; the room is very much part of the sound."
A combination of standard 6 string tuning and a 7th string dropped one full step for power chords, used by deathcore bands such as Suicide Silence, Oceano, and Whitechapel, as well as other bands such as Lacuna Coil, Blotted Science, In This Moment, Chimaira (on Pass Out of Existence and Crown of Phantoms), and occasionally Scar Symmetry, Escape the Fate, King 810, The Devil Wears Prada, Dry Kill Logic, Eldest 11, December In Red, A Fall To Break, and CFO$ on some songs. Triumphant Return guitarist Matti varies this tuning by dropping both the low B to A and low E to D and raising the high B and E a half-step to C and F (A-D-A-D-G-C-F).
Being a grand auditorium body shape guitar, it’s a little smaller than the typical dreadnought size that we’ve covered several times on our list. That’s no bad thing, and allows this guitar to be nice and flexible, especially when combined with the ‘Expression’ electronics system that allows for some good tonal customisation. Match up with an effective wireless instrument system.
The key to getting a great guitar sound really is in the hands of the engineer, not his equipment. I've gotten great sounds in multi-million dollar rooms, and topped them in the smallest of home studios. You can do it too. The key is to constantly experiment and apply some basic physics. Try different mics, try moving them closer and farther, try different angles, try putting the amp in a corner, try putting the amp on a concrete floor, try it on a wood floor, try it on a floor with green shag carpeting, just try anything!
EDIT: I didn't even think of scale size. I think that the difference between a few inches of string shouldn't make as much difference as some of the other factors I've described above. The conservative bet would be to get a short-scale, since that puts the frets closer together, which might make it easier for your fingers to stretch between them. (did I say that right? hmm...) If you're concerned about weight, go with a Fender or ask your Carvin rep what the weight of the guitar you're looking at is, and compare with other guitars. Lighter guitars will have a different tone than heavier guitars, but if it makes the difference between being able to play and not, then do whatever it takes!

The Ibanez DT-250 is a perfect guitar for shredding. The basswood is light so you can run all over the stage, jump off your stack, and still have energy to dive-bomb. Even do the splits. Notice that was a “you can.” These were outfitted with a pair of blade-pole V5 humbuckers, produced toward the end of Japanese-made pickups, before Ibanez started working with DiMarzio. They are smokin’ hot! This guitar almost leaps out of your hand when you plug it in. The Japanese improvements on the locking vibrato were also impressive, and this combines the precision of a Floyd Rose with the feather touch of a Kahler.

This old Nickelback hit is made up of only four different chords, written in the Key of G. During the verses only use G – C – F to progress, while the chorus of the song will add an Am (A minor) to change things up a little bit. This is a fun song to listen to and play along with, especially since the song is set a slower tempo, especially for a rock song.
Description: 1997 Non Left Handed Model. Body: Laminated Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - String Instrument Finish: Ebony, Natural, Vintage Sunburst
Whilst we’re on the subject of practice amps, we have to talk about the amazing BOSS Katana-Mini Guitar Amplifier. This little powerhouse of tone makes our best cheap amps that don’t suck list due to its immense sound, portability and inspiring tones within. Coming straight out of the acclaimed BOSS Katana series, the Katana-Mini uses the authentic multi-stage analog gain circuitry which allows you to select from three classic sound settings - Brown, Crunch, and Clean and enjoy a selection of fantastic sonic options. On top of that you have a classic 3 band EQ to dial in your perfect sound as well as an onboard tape-style delay.

Guitar technicians must be proficient in not only playing the guitar, but also in the construction of the instrument. They need to know how to repair and rebuild guitars from scratch as well as stringing and tuning the instruments. They need to understand how all the parts of the guitar interact to produce clear musical notes. This knowledge can be obtained through formal education, experience, working under a knowledgeable guitar tech or with other experienced musicians.
Featured specs include a solid sapele back and sides, solid Sitka spruce top, birch laminated (Stratabond) neck, Richlite fingerboard and bridge, white Corian nut and compensated white Tusq saddle. The neck shape is actually the same as that of the hugely popular Performing Artist Series. The neck also features Martin’s High Performance taper that makes it extremely ergonomic.
He has a way about him that makes you stop and listen, but he isn’t in your face. His sound is very melodic, which is why his tone was so perfectly matched to answering the needs of the vocals, yet he still holds his own in every tune. Bright, confident and edgy, he is a serious guitar-player and he has no intentions of holding back! People often say that he carries humour in his music, which is quite a clever characteristic to portray with this piece of equipment.
InstantDrummer provides tempo-sycronized drum loop sessions that can be accessed easily from within RiffWorks guitar recording software. Most RiffWorks InstantDrummer Sessions are loop recordings of professional drummers brought into the InstantDrummer format for easy manipulation by RiffWorks users. Play along with InstantDrummer sessions by famous drummers like Alan White (Yes, Lennon), Jason McGerr (Death Cab for Cutie), John Tempesta (Rob Zombie, Exodus, Testament, Tony Iommi, The Cult), Lonnie Wilson (Brooks and Dunn, Faith Hill, Tim McGraw), and Matt Sorum (Guns N Roses, Velvet Revolver). Use them in your recordings royalty free!
Why We Liked It - Even if this isn’t the cheapest guitar on our list, we think the Schecter Hellraiser is the best bargain! To get this much guitar for so little money is almost incomprehensible and we feel like a million bucks when we play it! It not only looks good, it sounds fantastic, and you can be sure to impress everyone who hears you play with this wonderful instrument!
Now, before you buy a brand new electric guitar, it is a good idea to pause and think about the purpose that you are buying it for. Do you just want to learn from it? Maybe you will want to upgrade it after a year or two when you become a more skilled guitarist? If this is the case, go with the most basic or affordable guitar. You don’t need anything fancy yet.

As a rule, open-backed cabinets tend to have a different low-frequency characteristic to closed ones, partly because no air is trapped inside the box to act as a pneumatic spring. One characteristic is that low-frequency sounds, such as damped lower strings, cause the speaker cone to move a considerable distance, producing what is affectionately known as cabinet thump. In addition, there is interaction between the sound coming from the front and the back of the cabinet, which may cause some frequencies to cancel and others to be reinforced.
The Epiphone ES-335 Dot was the world's first semi-hollowbody electric guitar, introduced in 1958. Today, it's made by Gibson, but it is still prized by jazz and blues musicians looking for a classic sound. Setting up the Dot involves adjusting the truss rod to correct for any underbowing or overbowing of the neck because of humidity changes. The bridge saddle on the Dot may also be adjusted to get the right distance between the string and the fretboard, called the “action.”
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(319) 378-1720, visibilitySalePrice=249.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114368474, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Thu Oct 25 10:53:54 PDT 2018, invMsgAvailability=, serialized=false, listPrice=249.99, isShipsInternational=false, name=3 Color Sunburst, storeCity=Cedar Rapids, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Cedar Rapids, newPrice=249.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=249.99, warranty=true, storeId=312, displayId=114368474, stickerDesc=, isOnSale=false} 249.99 USD
If you play an acoustic guitar but don’t own an amp and prefer not to (perhaps because you almost always play into a PA system) then this preamp is ideal for your situation. Not only does it give you the added control over your tone but, it also eliminates the need for an acoustic amplifier entirely, similar to the Venue DI. It’s also much cheaper than an amp.

This is a great local shop. I bought a new Floyd Rose bridge for one of my electric guitars and brought it to Franklin Guitar to be installed and set up. I got the guitar back within 2 days and it plays so well that I brought them my other guitar for a set up the next day. Again, within 2 days I had it back and it plays exactly like the other one...awesome. I had both guitars set up for a little more than half of what another shop quoted me just to install and set up the new bridge on the one. High quality work at a fair price in a reasonable time...I won't go any where else to have my guitars worked on. They also have a good inventory of guitars and amps for sale to fit any budget.

Forget Risky Business (remember the famous scene of Tom Cruise rockin' out in his boxers?); this technique, which I consider real air guitar, is serious business. It entails capturing the airy, percussive sound of the plectrum strumming or picking the electric guitar's strings-either in acoustic isolation or combined with the ambient sound from the amp-and then mixing this sound with the recorded amplifier sound. The addition of just a little percussive plucking can enhance the presence wonderfully for any style of guitar playing. In my opinion, it's the greatest studio-recording innovation since John Bonham's distinctive drum sound.
As much a sculptor as a guitarist, Pajo’s work in post-rock progenitors Slint was a frightening, seemingly rootless display of guitartistry that glided between extremes. Songs formed and dissolved without notice, turned inside out and back again, always at wildly unpredictable volumes. Pajo’s uncanny knack for both creating and shrinking spaces on tape would eventually become the blueprint for later luminaries like Tortoise, with whom he also played.
Description: Body: Maple - Burled - Top Wood: Maple - Burl - Neck Attachment: Set - Neck Wood: Mahogany & Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: 20, Medium - Inlay: Pearloid & Abalone - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ART-W - Bridge Construction: Ebony - Cutaway: Single - Hardware: Gold - Circuit Type: Passive - Pickups: Super 58 - Pickup Configuration: H-H - String Instrument Finish: Blue Lagoon - String Instrument Accessories: Hardshell Case
Unlike the other brands so far, Martin focuses more on the acoustic side of the world of guitars. They offer both acoustic and acoustic-electric guitars. The quality in the wood of a Martin strongly depends on the model you purchase. Their higher-priced guitars feature extremely high-quality wood, but even the lower end models are made of a decent material. Surprisingly, you can even find their lower-end models sporting Rosewood necks. Rosewood is known as one of the best materials to use for guitar necks. When it comes to resonators, on the other hand, Martin has that one in the bag. Most of the top-quality resonators in other high-end guitars are actually made by Martin. That, alone, should be proof enough of the quality of Martin’s resonators. Overall, Martins are excellent quality and are great for honing finger-picking skills. They are known for a warm, sustained tone and a very bright sound.
As stated previously, the closer 2 coils are to one another, the greater the cancelations will be when they go "out of phase". So, wiring a humbucker out of phase with itself is going to produce a lot of cancelations, a huge reduction in volume and a very thin sound. If that's not enough, the pickup will not be humbucking either. Still there are some people that like this kind of sound. The best way to put a humbucker out of phase with itself is to wire the coils out of phase in series. (see below)
Electric guitars are solid-bodied guitars that are designed to be plugged into an amplifier. The electric guitar when amplified produces a sound that is metallic with a lengthy decay. The shape of an electric guitar is not determined by the need for a deep resonating body and this had led to the development of contoured and thin bodied electric guitars. The two most popular designs are the Fender Stratocaster and the Gibson Les Paul.
The best advice any guitar player can give when it comes to figuring out which guitar to get is to buy the best model your money can afford. In most cases, this advice is rock solid. Even if you are a beginner who isn't sure whether or not you want to commit to playing guitar long term, you can always sell the guitar with a minimal loss, like a decent car versus a junker.  Think of it as an investment as long as you maintain and take care of it.
The Ibanez Artcore line is a beautiful example of modern guitar manufacturing. Normally, hollow-body guitars, even those from Epiphone, provide interesting challenges to companies trying to produce axes on a mass scale, and thus they have to charge a higher dollar. The Artcore series provides buyers with an option to shell out a fraction of the price for a really impressive guitar. The AF55 is a fully hollow option that will make you think you should have paid double for it.
One step up is the combination of a treble cut and a bass cut, with a single knob to select between them, like the one in the Electro-Harmonix Big Muff (Figure 2). The knob selects a blend of highs left over from the bass cut side and lows left over from the treble cut side. If you make the cut frequencies of the treble and bass sides far apart, you get a persistent midrange scoop, as in the original Big Muff. You can also have the bass and treble sides overlap in the middle and get a midrange hump in response. The near-endless variations you can get by tinkering with the relative values of the parts and the need for only one knob make this a favorite in effects.

As such, a velocity-sensitive MIDI keyboard is a must here, and the more experience you have with string instruments, the more you will get out of this VST. It's knowing things like how the string all have different weight and tension behind them and how the volume changes when a plectrum thwacks against the strings that will give guitarists the edge here.

Without some kind of amplification, it would of course be possible to “hear” what you’re doing. That is something very different from never hearing what a particular electric guitar sounds like when amplified. In that case get an electric with a soundboard such as an archtop or ask yourself “why would I not amplify a device meant to be amplified through the guitar pickups?”
A Wiki is a web page that anyone can make changes to. The job of maintaining accurate information is far too monumental for one person, but a community of enthusiasts can maintain many thousands of pages quite easily, each person adding a bit at a time. That's the idea behind iGuide?s "What's It Worth Wiki". The most famous example of a Knowledge Wiki is Wikipedia, of course. But, our vision is that someday iGuide?will become the Wikipedia of Art, Antiques, Collectibles, Memorabilia....and Guitars.
An Octaver is a cool little effect that will tune your original sound several octaves up or down in pitch. This effect can give you the ability to fill up the bass frequencies with your guitar. You can often see Jack White using this effect when he plays live with only one other drummer. He will turn on his octaver at certain points of the song to play bass lines.
For someone who’s been playing for a while, your options are a little different. Perhaps they’ve got a certain guitar in mind. If so, get them what they want! Chances are they’ve already done their homework and have their eye on their next guitar. If they’re not sure, you can still make an educated purchase. There are many popular options that should satisfy most experienced players. And there are many lesser-known models that can be the right fit for someone with more specific tastes.
Guild acoustic guitars are played by some of the best professional musicians in the business. From this standpoint, Guild is on par with Martin and Taylor, and completes the triumvirate of American acoustic guitar titans. As you’d expect, the prices follow suit. However, the GAD series offers a way for intermediate players to get a Guild acoustic for a reasonable price.
Sennheiser's cardioid MD421 crops up almost as frequently in interviews, and has a wider frequency response, none of the low mid-range suckout, and an even heftier sensitivity boost upwards of 1kHz. This microphone also has a larger diaphragm than the SM57, and the off-axis response anomalies of the larger diaphragm, in particular, give a different character to the sound. Although obviously very popular, this mic seems more often to be used in combination with other mics than on its own.
After covering the Top 5 Guitar Plugins You Need To Know and 5 Best Multi Effects for Beginner Guitar Players and 5 Guitar Stomp Box Pedals Every Guitarist Needs let’s face it: probably half of our sound comes from our amplifiers. That makes them kind of important… and with so many little things to consider, from size and reliability to power output and built-in effects, you might appreciate some suggestions. So without further ado, here are my Top 10 recommendations (in no particular order) for beginner Guitar Amps to get you started.
Dobro was founded by John Dopyera and a brother after he left National Guitar in 1928. The history of Dobro and National is long and complicated. Dobro merged with National in 1934. They contracted with Regal to build their guitars and for a time Regal was the exclusive builder of resonator guitars. They lost the rights to the names during World War II which led to a number of other names. The Original Musical Instrument Company was the last name used with Hound Dog being a brand of resonator guitar when Gibson eventually purchased them in 1994. Gibson currently sells Dobros (single cone, spider bridge resonator guitars) and Hound Dog brand guitars. Epiphone has also made resonator guitars.
Play your guitar a while like this, and notice how much more ring, richness, and sustain you get out of it. The strings should now vibrate for close to the full potential of the instrument (which, of course, also depends upon factors such as nut and bridge type and condition, body style, neck and body woods, and so forth). Put simply, your tone is likely to sound bigger and fuller, and to bloom with a broader voice and a longer note decay than previously. If this as-high-as-you-can-hack-it setting is a little too much for every-day playing, try backing the strings down a hair at a time, and hopefully you can find a height that offers a healthy compromise. Sure, it’s also possible you preferred it the way it was before you adjusted it at all, and if your playing style involves a lot of speed riffing, hammer-ons and pull-offs, or extreme bending, you might simply require that as-low-as-it-goes actions (and will very likely mask its drawbacks with some judicious high-gain tone). With any luck, though, you’ll have discovered an easy means of achieving a fatter tone, without purchasing or modifying a single thing.
"Our expertise is to customize guitars according to the specifications of our clients. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. Our 100% satisfaction guarantee allows you to buy with confidence!"
As both the British invasion and the 1960s came to an end, Rickenbacker guitars fell somewhat out of fashion; however Rickenbacker basses remained highly in favor through the 1970s and on. Perhaps as an echo of the past, during the late 1970s and early 1980s, Rickenbacker guitars experienced a renaissance as manyNew Wave and jangle pop groups began to use them.
Pictured is a tremolo arm or vibrato tailpiece style bridge and tailpiece system, often called a whammy bar or trem. It uses a lever ("vibrato arm") attached to the bridge that can temporarily slacken or tighten the strings to alter the pitch. A player can use this to create a vibrato or a portamento effect. Early vibrato systems were often unreliable and made the guitar go out of tune easily. They also had a limited pitch range. Later Fender designs were better, but Fender held the patent on these, so other companies used older designs for many years.