PUENTE HARDTAIL Para cambiar las cuerdas, pase las nuevas cuerdas por los ojales correspondientes situados en la parte posterior de la guitarra y llévelas por encima de la silleta. Puede ajustar la octavación girando el tornillo de octavación situado en la parte posterior del puente con un destornillador Phillips para desplazar la silleta adelante o atrás.

(https://rytmenpinne.wordpress.com/sounds-and-such/salamander-grandpiano/) (http://creativecommons.org/licenses/by/3.0/). Some versions on this site have been carefully edited down to 6 velocity layers and looped at the almost inaudible tail ends to reduce Ram usage but the quality is almost indistinguishable.  They are based on a nicely sampled Yamaha C5 Grand. Samples have been normalised, re-attenuated, latency reduced and modified for sf2. Three or more brightness levels are available plus optional resonance.
I also didn’t mention a tuner, but that’s because a tuner really isn’t an effect. If you use one, the ideal location is in the very front of the signal chain right after the guitar as you don’t want the signal going into the tuner processed by any effects that might affect the tuner’s accuracy. Even better, get a loop switcher with a separate tuner output that keeps the tuner entirely out of the signal chain until you need to use it and that will mute the signal so the audience doesn’t need to suffer while you make adjustments.
If you haven’t heard Colin Hay’s acoustic version of “Overkill” from his solo album ‘Man @ Work’, you haven’t really heard this song. This has been my favorite acoustic guitar song for some time now. I like the mainstream version, but this one blows it away. For a taste, try listening to it as a sample on iTunes or amazon. BTW, if you decide to download it, DO NOT get the much shorter edited version off of the ‘Scrubs’ soundtrack.

Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.

The first pedal-operated flanger designed for use as a guitar effect was designed by Jim Gamble of Tycobrahe Sound Company in Hermosa Beach, CA, during the mid 1970s. Last made in 1977, the existing "Pedalflangers" appear occasionally on eBay and sell for several hundred dollars. A modern "clone" of the Tycobrahe Pedalflanger is sold by Chicago Iron.Famous users of this Flanger effect include Randy Rhoads and Eddie Van Halen, coincidentally they both used the MXR M-117R flanger and Eddie Van Halen even has his own signature model now.

What is an Essex? Also who compiled this list? It definitely wasn't guitar professionals. Every guitar maker has top line and then entry level guitars. Top line for those that can play and entry for the beginner who 9 out of 10 stop playing and they don't care that a $60 to $200 mistake lays in the closet for years. Yamaha makes 100's of styles and a lot are great guitars and some stink. It goes with the territory in a very competitive market. This should have been better defined and broken down by cost levels. Because this could have even been titled "The 10 Best Guitar List"
hi-its the standard wiring for a strat-i have the push pull in the middle position-i have two wires going from two lugs on the push pull pot- one   giong to neck position on 5 way selector swich and the other to voloume on selector switch-when i have select     brige position when  i pull  middle pot i get neck and bridge -next position all three – middle position neck /middle .next neck middle and first position -neck=also if you put two tone  caps on one pot will it effect the pickup sound when it maxed to ten  and willit sound too bassy–thanks sean
While most instruments made by Harmony and Kay were much cheaper than Martins, Gibsons or Fenders, the upper-level, more elaborate ones actually cost more money than some lower-end and even mid-priced Gibsons and Martins. A top-of-the-line Harmony, Kay or Silvertone made by Harmony featured inlay, binding and multiple pickups, switches and knobs, and cost more than a Les Paul Junior or Special and in some cases fully as much as a Les Paul Standard. While one of these instruments in near-perfect condition today might fetch $1,000 or more, it certainly would not have been nearly as good an investment as spending less to buy a Les Paul Junior and sure enough not as good an investment as spending an equal amount to buy an original 1959 sunburst Les Paul Standard.
Among the most common rookie amp buyer mistakes is buying a big amp that's too heavy to gig with, or going the opposite and buying one that's too small. If you're gigging at different places and you don't have a roadie, then consider going with a smaller amp that has DI output so you can go straight to PA with your tone intact. In big venues where big amps are a must, some opt for amp heads because the separated head and speaker cabinet are lighter on their own, although you'll have to move more pieces.

Description: Body: Mahogany - Body Construction: Solid - Neck Wood: Maple - Neck Construction: 3 Piece - Nut Width: 43.2mm - Fingerboard: Rosewood - Frets: Bound, Jumbo - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Gibraltar/Accucast - Hardware: Black - Pickups: EMG 81/85 - Pickup Configuration: H-H - String Instrument Finish: Black
Gibson Les Paul and Fender electric guitars can retail for several thousands of pounds, but electric guitars for beginners are available for less than £100. One example of a cheap electric guitar is the LA Electric Guitar + Amp Pack, which features everything a beginner needs to start playing the guitar right away for under £90.00. It includes a 15 watt guitar amp with 6.5" speaker for practising, a guitar lead, a strap, a padded gig bag, a set of spare strings, a pick and a 2-year warranty. The electric guitar itself has a neck made from maple - the most common type of wood used in necks - which helps to expand on the treble sounds of a guitar due to its hardness. The guitar is capable of producing a wide variety sounds, thanks in part to its 3x single coil pickups with a reverse wound middle pickup, which enables users to experiment with playing different styles of music.
The idea of what actually constitutes a “beginner” amp has changed over the years. Before playing electric guitar became such a widespread hobby, most guitarists had at least some aspirations of becoming a professional at some point. As a result, a good beginner amp needed to be capable enough for live performances and recording, in addition to practice.
The arched top Strats all had maple necks, rosewood ‘boards, black hardware, Floyd Rose licensed locking vibrato systems, and slight finish variations. The SSL-1 had a single humbucker with a volume control that had a push-pull coil tap. This could be had in metallic black, purple burst, white pearl, red pearl, and pink fire. The neck on the early SSL-1 is described in different sources as having a stain finish or as having an oil finish; there’s probably a clue to dating sequence here, but I don’t know the answer.
Other notable effects include the tube-driven Leslie speaker series, which originally modified the sound of electric organs (such as the Hammond B3) until guitarists like George Harrison (and the Beatles more generally) began to use it for spacey chorus, tremolo, and phaser tones. The classic 60s model, the Leslie 122, was housed in a huge 41-inch wooden laminate casing and comprised of two motors (essentially two electromechanical horns) that had been rotated to create a Doppler-effect-based vibrato. These horns were, in turn, picked up by the dual speaker units. The Leslie 122 wasn’t even built to connect to a guitar, but bull-headed technicians fudged the electronics and made it work anyway. The laminate wood wasn’t just for aesthetics, either: It functioned as a partial enclosure, ensuring mellower tones, and different woods created different vibratos.
Interestingly, the neck is crafted from maple, topped by a 20-fret walnut fingerboard which complements the back and sides nicely. Following the specs of older Gibson guitars, the scale length is shorter at 24.75", while the nut width is 1.725", which gives the instrument a comfortable playing feel. Adding to the already good vale of this guitar is the built-in LR Baggs Element electronics for stage performance, with discrete soundhole mounted volume control. If you are looking for a handcrafted workhorse acoustic guitar that will not break the bank, then check this out.

If you’re making the crossover from electric to acoustic, then Takamine won’t be a particularly well known brand to you, but rest assured that they’re a top make when it comes to acoustics, and of course electric acoustics. The GN93CE-NAT is a mid-range electric acoustic that features some really nice touches, such as the rosewood fretboard, and is an interesting choice.

By the late twenties, the idea for electrified string instruments had been around for some time, and experimental banjo, violin and guitar pickups had been developed. George Beauchamp had himself been experimenting with electric amplification as early as 1925, but his early efforts involving microphones did not produce the effects he desired. Along the way Beauchamp also built a one-string test guitar made out of a 2X4 piece of lumber and an electric phonograph pickup. As the problems at National became more apparent, Beauchamp’s home experiments took on a more rigorous shape, and he began to attend night classes in electronics as well as collaborating with fellow National employee Paul Barth.[1] When the prototype electric pickup they were developing finally worked to his satisfaction, Beauchamp asked former National shop craftsman Harry Watson to make a wooden neck and body to which the electronics could be attached. It was nicknamed the frying pan because of its shape, though Adolph Rickenbacker liked to call it the pancake.[6] The final design Beauchamp and Barth developed was an electric pickup consisting of a pair of horseshoe-shaped magnets that enclosed the pickup coil and completely surrounded the strings.[1]
Fred’s wife Lynn Shipley Sokolow served as our student tester. She plays double bass and banjo in the Americana quartet Sugar in the Gourd but is just starting to learn her way around the electric guitar. I also got Wirecutter’s John Higgins to give me his opinions of the amps; he is a Los Angeles session musician and frequent Wirecutter contributor who has a master’s degree in music from the University of Southern California and more than 10 years’ experience teaching music at private schools.
Though not much is known about the production of the Hi-Flier after about 1977, it clearly came to an end — and clearly has had an impact on players in the vintage market. Used by guitarists like Cobain and Lee Ranaldo of Sonic Youth, as well as many others in a variety of bands, the Hi-Flier gained notoriety as a unique guitar with a sound as striking as its looks.
Grover Jackson became a partner with Wayne Charvel in the Charvel's Guitar Repair shop in California in the 1970s then Grover Jackson took over the entire business in 1978 and at that time they were making guitars under the name Charvel. Their guitars were tailored to the heavy metal and hard rock genre's of the day. Then a relatively unknown Randy Rhoads, who had just joined Ozzy Osbourne’s new band, contacted them in 1980 with the idea to create a highly customized guitar. That guitar, a new take on the Flying V called 'Concorde' became the first guitar to carry the Jackson brand and the company has been popular with shredders ever since.

A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:
I played electric guitar in a band from the age of 12 through to the age of 36, then gave it up. Now, at the age of 68 I want to get back into playing. I went into a store and tried playing and found that my fingertips really hurt! Are there any electric guitars where the metal strings don’t hurt or do I just need to “grin and bare it” until my fingertips get calloused again?
No-load pots – also used by Fender, these pots have the clockwise lug disconnected from the resistive strip within, resulting in infinite resistance between the wiper and the other outer lug when turned fully clockwise. These are sometimes used as tone controls, to remove the load on the pickup(s) presented by the pot and the tone capacitor when turned to 10.[10]
I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.
Although we encountered Japanese guitars from the early 1960s onward, the few Teisco brand and other Japanese instruments of that time did not capture nearly as large a market share in the USA as Harmony, Kay and Danelectro. Japanese guitars of the 1960s were generally very crudely made and did not at that time present any great threat to the market dominance of American-made student models.
This great book of interviews is, in my opinion, one of only a handful of truly essential record-production books, and is packed with down-to-earth recording advice, as well as discussions of the art of production. In addition to the interviews I've referred to in this article, the book also features such greats as Glen Ballard, Arif Mardin, Brian Wilson, Phil Ramone, Mitchell Froom, George Martin and Geoff Emerick, and one of the strengths of Massey's approach is that he often asks them similar questions, which makes for interesting comparisons.

The same kind of automatic difficulty adjustment works in Rocksmith's Lessons feature, which is just what it sounds like: a set of tutorials to teach players everything from how to hold the guitar and basic picking techniques, to how to bend, slide, and hammer on notes. Get them right and you'll advance to ever more challenging material. Struggle, and the oh-so-polite instructor tells you he's just going to slow that riff down a little and give you another crack at it. Herein lies Rocksmith's greatest strength as a teaching tool—it gives you the ability to learn at your own pace without fear of judgment.
1928 to 1967: Tortoise grain celluloid pickguards glued directly to the top, clear finish then applied over top and pickguard. Due to extreme shrinkage of celluloid and lacquer, this often causes a "pickguard crack" in the top. Pickguards became "standard" in 1931 on most models, but some martin guitars had them as early as 1928. The OM series was the first model to consistently have a pickguard in 1930.
Jazz guitar playing styles include rhythm guitar-style "comping" (accompanying) with jazz chord voicings (and in some cases, walking basslines) and "blowing" (improvising solos) over jazz chord progressions with jazz-style phrasing and ornaments. The accompanying style for electric guitar in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In rock and pop, the rhythm guitarist typically performs chords in dense and regular fashion to define a tune's rhythm. Simpler music tends to use chord voicings focused on the first, third, and fifth notes of the chord. In contrast, more complex music styles of pop might intermingle periodic chords and delicate voicings into pauses in the melody or solo. Complex guitar chord voicings are often have no root, especially in chords that have more than six notes. Such chords typically emphasize the third and seventh notes of the chord. These chords also often include the 9th, 11th and 13th notes of the chord, which are called extensions, or color notes.
Thinking out loud... what defines electronics then? I've always assumed that the pickups, caps, pots, etc. inside an electric guitar constituted an electronic system. The "guitar's electronics" facilitate a deliberate flow of electrons through a circuit with semi-conductors, etc. Heck, with coils and magnets (and sometimes battery packs), they also provide the electricity that's conducted through the system.
This is a special edition by Boss, for one main reason, they’ve collaborated with Fender to design the FRV-1 (click for full review), a dominant manufacturer of guitars which everyone should have at least heard of by now.This pedal is an enhanced remake of its old classic release, the manufacturers have kept everything people loved in the original release, while adding more quality.

I have a Gemtone guitar tube amp that was made in Canada in early 70's I think. This is the only Gemtone I have ever seen and the only information I could find out about it (but not verify) is that it was a sub-company of Regal Instruments. I would love to find some more info about this amp but have nearly given up after several years of searching. Sorry its not really an answer but my hope is to fire up the thread again so someone with more concrete info can chime in.

Been meaning to try this for years.... Should have done it earlier! It really works well for me, despite a puny Atom cpu in an HP netbook and a kludged lead from an electric Ukulele stuck into the microphone socket. Yes, this lash-up can be noisy - the impedances are mismatched, the signal levels too, but a very respectable result indeed. The processing is highly effective and the presets are (of course) variable in their suitability (not every effect is ideal for a ukulele) with gems that include a really decent and surprising choice of autowah effects. Never thought I'd say that. The user interface is logical, but there is a lot of it. That's because it can do so much. Fortunately there is a 'Random' button that creates random new patches for you - keep pushing it and some fun stuff can emerge. Documentation is helpful - press F1 and have a look, it even includes hardware suggestions and hints. I intend to follow that religiously so as to get the best from this gem - and I'll be spending money to get the suggested full fat Behringer interface (~£20) from Amazon, and trying a less-compact machine with some more CPU to see if that adds to the experience. Problems? A couple of the presets do seem to crash Rakarrack - but apart from that irt has been solid. Recommended to give it a go, if you have not already done so. Both guitar an uke work well with this.
Thats a major bend of opinions! It all boils down to..the style of music that you play and what you expect out of the guitar! Is playing only a hobby or are you trying to make a living bangin that Ax? The price of a guitar is not as important as the ability of the person strumming the strings! If your abilitys suck,and you have a expensive guitar..You Still Suck..No matter how good the guitar may be! I have owned cheep and expensive guitars of all different brand names..some very good..some very bad..bottom line is..if Your happy with the AX,thats all that matters! Screw the Name or the Price!!
Later makes of fuzzes—and later generations of those above—moved on to silicon transistors. Many players found the silicon-based models a little harsher sounding, however, and the legend of the magical germanium transistors began to grow. Even so, plenty of guitarists get along just fine with the silicon variety. Eric Johnson, often credited with ears of canine keenness, has used a silicon-transistor Dallas-Arbiter Fuzz Face to drive the dirty rhythm of his famous multi-amped, multi-routed set-up. He also holds the unit together with a rubber band because he says the bottom plate’s central mounting screw affects its tone. Make of this what you will.
Another way of categorizing bass equipment manufacturers is by which part of the market they are targeting. While Peavey and Yorkville products are aimed at the generalist mass market, some bass equipment manufacturers, such as Acoustic Image or Walter Woods make expensive "boutique" equipment that is aimed at a niche market within the professional musician market. Acoustic Image amplifiers and speaker cabinets tend to be used by professional acoustic folk and jazz musicians, and Walter Woods amplifiers are associated with professional acoustic jazz bass players.
The first “production” electrics were made by Stromberg-Voisinet in Chicago in 1928 under the direction of Henry Kay “Hank” Kuhrmeyer, soon to be president of the company which would shortly be renamed the Kay Musical Instrument Company. S-V developed the first commercially viable (more or less) pickup and amplifier. The pickup – we’ve yet to see one so an accurate description is impossible at this point in time – was probably a quasi-transducer which probably adapted phono cartridge or telephone receiver technology. It was placed on S-V’s two-pointed Venetian-shaped acoustic guitars and was greeted with great ballyhoo in the music trade press. The amp was produced before the development of preamp tubes, and was undoubtedly very primitive (there is no mention of even volume controls), and probably not particularly loud (though, of course, listeners had nothing to compare). Apparently, the reality didn’t live up to the hype, because Kuhrmeyer later suggested than only a few hundred of these guitars were actually made, and mention of them evaporates after 1928, likely done in by a combination of lack of performance and the upcoming Great Depression, which descended in 1929.

The SG Standard is Gibson’s all-time best-selling guitar. It was conceived in 1961 and originally released as the new Les Paul. It featured distinct horn-shaped cutaways, and the neck joint was moved three frets, which made the guitar lighter and allowed easier upper fret access. In addition to these changes, the body was slimmer than the Les Paul Standard and the neck profile was more slender. However, with Mr. Paul preferring the sturdier design elements of his original model and due to contractual complications, his name was ultimately removed. Where Les Paul saw a mutation of his original design, others saw genius—from ’63 on, the Les Paul name was removed and the SG, or “Solid Guitar,” was born.
Designed by Mesa founder Randall Smith, the amp uses silicone diodes that give it a gain level and feeling all its own. The amp proved especially popular with metal and hard-rocking groups such as Living Colour, Metallica, Tool, Korn, Soundgarden and Foo Fighters. In 2009, Mesa revamped the Dual with a third, dedicated clean channel, making the venerable workhorse more versatile than ever.
your right brian i been a acdc freak since u all been out in the early n mid 70s the greast band of all time. and i seen acdc 37 times through out the united states. i love my memories with the band and still watch and listen to the cds and dvds of the band. brian johnson is the best thing that happen to acdc since bond scott death. keep rockin guys i love u with a passion. mark

Monte Allums Mods – Tweaking the tone of inexpensive stomp boxes is an obsession of Monte Allums. He started modding mainly because he refused to spend $200 to $300 or more to achieve great tone. Monte believes that most expensive boutique pedals are simply clones of inexpensive pedals, but upgraded with higher-quality components. So his mods and kits feature classic designs with better components to deliver superior tone.
Selling my guitar rig i used here in RSA Not splitting up 1 x tech 21 sansamp psa1.1 preamp,studio standard 1 x crate Powerblock 150w mono or 2x 75w stereo amp 1 x 4x12 quad box,custom built with plywood not cheap chipboard, loaded with celestion G12s All as good as new Too heavy to ship overseas Can swop for something lighter i can carry on a plane

It also includes a -6dB/oct low-pass filter that’s built into the plugin’s tube/valve modeling equation, and can imitate a lower-quality tube triode.  There’s a switchable output saturation stage, which can be used to overdrive the output signal and all the standard Voxengo plugin features, such as full multi-channel operation, channel routing and built-in oversampling. It’s great for guitars and for dirtying up sounds such as vocals, drums or synths.

The Loar guitars are crafted after the classic guitars of the 1920’s and 30’s. Cited by many owners as a great singer songwriter guitar, the LH 200 is a small body folk style acoustic. It does not have the volume of a dreadnought style body, but this guitar is described as having a warmer tone. It has a solid spruce top with mahogany back and sides. So if you fancy yourself a singer songwriter, this may be a great choice for you. It's the best small body acoustic guitar under $500, in my opinion.
Crafted with quality body woods, it features a solid cedar top with a wild cherry back and produces a dynamic sound with a good mid-range that projects wonderfully. Sitting at the top is a distinctive, tapered headstock, which allows for greater tuning stability, while the hand-finished silver leaf maple neck – with rosewood fretboard – is slightly fatter than other acoustics, and is great for fingerstyle guitarists.

: But in general, there's nothing wrong with Decca electric guitars, especially for indie musicians today who are looking for a vintage guitar with some character to it. Since most vintage guitar fans have seen every model that Gibson, Fender, et al, have ever made, many of the Japanese guitars of the '60s have a fresh look that stands out from the crowds. In 20 years, the M-i-J electric guitars of the '60s are going to be worth 4 or 5 times what they sell for now, and smart collectors who either can't afford Fenders, Gibsons and their ilk from that period, or who are interested in something more unusual, are already snapping them up.
Fuzz: A fuzz pedal or "fuzzbox" is a type of overdrive pedal that clips a sound-wave until it is nearly a squarewave, resulting in a heavily distorted or "fuzzy" sound.[53][56] Fuzzboxes may contain frequency multiplier circuitry to achieve a harsh timbre by adding complex harmonics.[57][58] The Rolling Stones' song "(I Can't Get No) Satisfaction", with the main riff played by Keith Richards with fuzz guitar, greatly popularized the use of fuzz effects.[23] Fuzz bass (also called "bass overdrive") is a style of playing the electric bass that produces a buzzy, overdriven sound via a tube or transistor amp or by using a fuzz or overdrive pedal.
The Line 6 Spider IV is the most fully featured beginner amps out there, yet is surprisingly inexpensive, only edging out the Orange Crush PiX CR12L a little bit on cost. The Line 6 Spider IV 15 offers four amp models, six built in effects, a built in tuner, a headphone jack, and a CD/MP3 player input. Everything a beginner needs to practice in one compact package. These features aren’t completely necessary for beginners to have, but they do serve as a nice convenience and the Spider IV does not cost that much more in the process to add them. On top of that, the Spider IV still manages to be straight forward and easy to use, despite all the built in options.
Some distortion effects provide an "overdrive" effect. Either by using a vacuum tube, or by using simulated tube modeling techniques, the top of the wave form is compressed, thus giving a smoother distorted signal than regular distortion effects. When an overdrive effect is used at a high setting, the sound's waveform can become clipped, which imparts a gritty or "dirty" tone, which sounds like a tube amplifier "driven" to its limit. Used in conjunction with an amplifier, especially a tube amplifier, driven to the point of mild tonal breakup, short of what would be generally considered distortion or overdrive, these pedals can produce extremely thick distortion sounds much like those used by Carlos Santana or Eddie Van Halen. Today there is a huge variety of overdrive pedals, and some of them are:
Its the type of clipping you would expect to hear from a tube amp that been naturally gained up by cranking the volume levels really high.  Some players refer to this sound as Crunch.  These Overdrive pedals, such as the famous Ibanez Tube Screamer, can also be doubled up to give two gain stages:  Slight Crunch and Creamy Velvet Lead.  They sound as good as they might taste, if they were flavors of cereal or ice cream.  Many players found their tone by using two overdrive pedals back to back.

Time controls the length of time between any two repetitions of your signal. It is most often measured in milliseconds (ms). Most delay pedals don’t have a delay-time readout that would enable you to determine exact delay times in milliseconds, so you typically just adjust the Time knob to get an approximate time based on the unit’s available range. For instance, the Boss DD-7 (street $179) has a Mode knob that selects between four time ranges—up to 50 ms, 51–200 ms, 201–800 ms, and 801–3200 ms—and the Time knob then adjusts the setting within the selected range.
For a relatively new band, Dream State have - in industry parlance - gained some serious frigging traction, playing Reading/Leeds last year, gobbling up streams in the millions and signing to hardcore label par excellence UNFD. Lead guitarist Aled does a deft line in a tapped arpeggio, while breakthrough single White Lies covers a hell of a lot of ground in its four minute runtime - combining Marmozets’ urgency in its opening and Deftones’ dynamics at the close. 
"The Legacy’s vintage-spec CLF-100 Alnico V pickups have that unmistakable chime and quack reminiscent of the best examples from the late ‘50s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo’s private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D engineer at another company when he was tasked with finding out what was so special about the early bolt-on guitars many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail guitars, spending time out on the shop floor talking to builders still working in the pickup department since the ‘50s, all on a quest to discover where the real mojo was – and wasn’t. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming that down that old production line varied considerably. That meant coming up with the right specs for the Legacy pickups was more challenging than simply following the prints. Gagon’s persistence paid off as the Legacy garnered rave reviews from both players and magazines like Guitar Player and Guitar World."
I want to focus on acoustic guitar but some electric is alright. Mainly I want to build up a repertoire of songs that MOST people will know if heard and be able to sing a long. Currently I know very few songs such as this but I have been playing off and on for years. Any really popular (old or newish is fine) songs that are not impossible to play would be great. Thanks!
One of the most important attributes of boost pedals is their transparency. In other words, they need to able to boost the signal without changing the signal itself. As easy as it sounds, achieving good transparency is pretty hard and not many pedals are capable of doing so. With that said, a good booster pedal is a pretty powerful tool in the right hands.

No guitar recommendation list is ever complete without a Fender product in the mix. Squier is Fender’s more affordable instrument range, and this set is a great place to start. The affinity series Stratocaster is available in sunburst, classic black, or candy apple red. A 10 watt Fender amp and corresponding cable are also included alongside a strap, 3 picks, snap on the tuner, tremolo bar, replacement parts and tools, strings, gig bag, and an instructional DVD to help you get off on the right foot with your playing.
Other handheld guitar and bass resonators on the market, manufactured under the tradename SRG, produced by Aescher Europa, in Germany, are available in both monophonic (one note at a time) and polyphonic (multiple notes at once) models, which include multiple onboard trigger switch effects, such as HPF (high pass filter) for enhancing harmonics and producing feedback effects, and LPF (low pass filter), producing a bass boost with a cello sound on heavy gauge strings. Later EBow models, such as the plus Ebow, contain a mode slide switch on the back, which allows the player to either produce just sustain or overtone feedback in addition to sustain.[69]
He also opened the doors for left-handed guitar players by showing them that they too can master a musical instrument and make something unforgettable from it. In the same way that a “southpaw” boxer like Manny Pacquiao achieved unbelievable things in the ring, the gifted left-handed guitarist Jimmy Hendrix pushed guitar playing to its highest level.
I have many Behringer pedals.Used them gigging.Have had many people ( lots of musicians ) asking me what I am using to get my tone and effects .They are all surprised when I tell them Behringer pedals.And almost all say the same thing."aren't they made of plastic"? Yes they are made of plastic.But being someone who has worked in the plastics industr.for 25 + years I know Plastic can be very strong .I have done hundreds of gigs with these pedals and never had a problem.You would really have to jump ontop of these hard to damage them.And if you did that with the non plastic pedals I am sure you would also have a problem .That said.I have 5 fx600 pedals because I found a site selling them for $14.A super bargin for so much effect.As far as battery power nowadays batteries cost more than pedals so anyone ... full review
I work out of my home shop in Idaho Falls, Idaho.  I do repairs for clients and guitar shops all over the United States.  I’d love to help you repair or restore your guitar.  Repair prices are based on a rate of $60 per hour.  These prices apply to guitars in otherwise good working order.  Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss.  Consultations are always free.
Looking for a lifelong friend, something solid that will get better with age and can take a thrashing if needed. I plan on using drop tunings for heavy rock and will be dropping a set of alnico bare knuckle pickups into it and running it through a dual rectifier. Preferences but not important are, mahogany body, standard bridge, Les Paul style necks, most classic body shapes. Any model/brand suggestions would be greatly appreciated. I’m living in an isolated region so this will be a blind purchase. Really love my Schecter Diamond Series Tempest Classic but unfortunately it did not stand the test of time and will need a restoration on the neck.
The intervals between the notes of a chromatic scale are listed in a table, in which only the emboldened intervals are discussed in this article's section on fundamental chords; those intervals and other seventh-intervals are discussed in the section on intermediate chords. The unison and octave intervals have perfect consonance. Octave intervals were popularized by the jazz playing of Wes Montgomery. The perfect-fifth interval is highly consonant, which means that the successive playing of the two notes from the perfect fifth sounds harmonious.
Popularity also was a critical factor in our choices, although we generally passed over a few best-selling reissues or boutique clones in favor of the real deal. So even though the Bubba Bob Buttcrack Tube Overdrive may sound more soulful than an original Tube Screamer, if it’s little more than a copy with slightly upgraded components, it didn’t make the cut.
Replace or upgrade your guitars pickup selector and other switches with the highest quality switches available from Switchcraft, CRL, Fender, Oak Grigsby Gotoh, Philmore and other top brands. Lever/blade style switches, toggle switches, mini switches, rotary switches, slide switches and other styles. For pickup selector and mini switch technical data, visit our Pickup Selector & Mini Switch Connections page to view drawings with the internal switch connections of each switch position. And if you are upgrading or replacing your pickup selector switch with a different type or style, check out the Pickup Switch Terminal Cross Reference page to view the corresponding terminals of the most common pickup selectors and switches.
Fortunately I did some research, performed some trial and error experimentation on my own semi-hollow (a very nice Epiphone Dot) and found what I consider to be the best way to wire up a hollow body guitar. You won’t need any uncommon tools or equipment – just a wrench set (or an adjustable wrench), plenty of wire, a pair of needle-nose pliers, a soldering iron, and a bit of patience. I’ve included plenty of pics to help illustrate each step.
Electric guitars largely depend on electronic pickups to generate their sound. They usually have one, two or three pickups that are mounted in the body. Depending on their mounting location and type of electronics, pickups will produce a variety of sounds. Multi-pickup electric guitars have controls with which you can select output from each pickup or blend their output. This allows you to create a variety of sounds, all from the same guitar.
Here we have a great D-28 clone from the finest Matsumoto Japanese guitar factory with a lot of history of making premium guitars Aria this is a AD-35 model these high quality D-28 copy’s were made in Japan for a short time frame of about a decade or so I believe discontinued in early to mid 1990’s for the Japanese domestic market not seen in the US until recently. Aria Dreadnought / Aria Auditorium SERIES The pursuit of perfection - This was Aria’s theme pursuing continuously ever since they started to manufacture guitars in 1956. This Aria Dreadnought / Aria Auditorium series lent brilliance to the early and middle days in the history of Aria acoustic guitar they know how to make great guitars this is model is no exception. The high standard for workmanship and materials are simply second to none. This instrument produces a Rich sound and offers the intermediate - pro grade playability from the determined beginner to the accomplished player. With its premium Solid Sitka Spruce top, will increase the volume and dynamic complexity of sound as you play it more and more. Noted Japan’s advanced finishing skills learned over decades this gloss vintage thin poly finish allows tone to jump of its sound box. AD-35 features Solid sitka spruce top and beautiful rosewood back and sides -bridge and fingerboard, the body binding, the center line of the body back and so on. I believe the original brochures specs were all solid woods on this run from Aria I look and can not tell you be the judge for yourself. This is recommendable model to guitar players who want to own a high end Martin D-28 but on a realistic budget you wouldn’t compromise much here surprisingly. This example has been upgrades here at JVGuitars with a Martin bone nut and compensated saddle - solid ebony decorotive with Abalone detail bridge pins and new set of Martin Marquis strings .... she has been fully cleaned and polished from headstock to bridge pin and natural rosewood re-hydrated with lemon oil We also leveled -dressed -recrowned-polished refined frets .... she plays and sound like a MUCH more expensive guitar now... sure to please for decades to come She’s a beauty and easily in 8.7/10 condition with a few insignificant blemish nicks - scratched we have addressed by lacquer tip color matched touch up and repolished Specifications: Top : Solid Sitka Spruce Back & Sides : Rosewood ... said to possibly be solid woods ... little is difinitivly known of this series just looking it looks to be solid you judge for yourself Neck : Mahogany Fingerboard : Rosewood Bridge : Rosewood Hardware : Chrome Finish : vintage gloss Hand crafted in Japan Vintage very good used condition Sound is really good!!! Contact Joe to buy it at jvguitars@gmail.com .
As you'd expect, the most important decision to make with multi effects pedals is the choice of which effects, specifically, you want in them. The Electro-Harmonix Epitome Multi-Effects Guitar Pedal, for instance, is a veritable buffet of effects including flanger, chorus, reverb, pitch-shifting and more. But if you're looking for an expression pedal, you'll probably be more interested in a unit like the Vox StompLab IIG Modeling Guitar Effect Processor, which has one of those built in. Both of these multi effects pedals are top sellers, which comes as no surprise considering the versatility they bring to the table.
Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you are looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.
Perhaps the most popular choice though is a paper in oil capacitor. I have tried so many brands and options, and truth be told, it's very hard to notice a substantial difference and you can, unnecessarily spend a lot of money on premium ones. I received so many requests for a PIO equipped harness, so in an effort to try and whittle my findings down to a good value, tight tolerance and good sounding paper in oil capacitor, I've settled with one made by WD Music USA which are superb. Compared to other PIO caps on the market, they're a reasonable price and importantly are tight tolerance meaning the key details about how it will react with a tone pot, is accurately presented. Again, no real right or wrong here, if your budget allows you to go crazy on capacitor choices, no one can tell you not too. But truthfully, just pay attention to the tolerances, as that will tell you the most about how it will 'sound'. 
The Effect: Vibrato effect, often mistaken for a tremolo, is the type of guitar effect that alters the pitch of your signal. The result is very similar to that which you get when you operate the tremolo bar on your guitar. There are different types of vibratos out there, but the most common division is between analog and digital units. Analog vibratos are known for their clarity and organic feel that comes from analog pitch shifting.
I have played a ASAT Telecastor Bass for about thirteen years. I keep purchasing other bass guitars for many other reasons. But I have sold them all. I am down to just one bass that's all I need with my G&L, it very responsive, it has many opitions with pick ups and the action is good. It took along time for me to figure out how to use the pick ups because there is so many different ways you adjust it. They are built with better quality parts than a fender. They are numbered from the factory in america. But watch out for the Tribute series that is fake or cheap want to be G&L. A real G&L will be a little more expensive but the quality is excellent
Have you ever looked at a guitar and wondered, "How do they make that?" Or thought to yourself, "I bet that I could build my own guitar," but never actually tried it? I have built several electric guitars over the years and through trial and error have learned many helpful tips that anyone who might want to tackle this sort of project needs to know before starting out. This kind of thing does require some wood working skill and also requires some specific tools as well but not all the fancy stuff that a guitar manufacture has. Building an electric guitar is time consuming and requires the completion of several steps before your project gets finished but be patient and you'll be happy with the results. I tend to go into detail so as not skip any steps or tips you need along the way, and use pics from other projects that I did as well so you can get more that on reference. If you set out to make a guitar you'll find that it takes quite a bit of time so you'll have time enough to go back and read other info if you just want to skim through the first go round. So I hope this helps all the future guitar builders out there!

The first thing is to adjust height. If you have the first type, you will need a flathead screwdriver. The two posts holding the bridge have flat slotted heads showing at either end. You can turn these clockwise to lower the strings or counter-clockwise to raise them. Find the string height that suits you. For an electric guitar, it will be about 1/4" off of the neck or lower. Get the strings as low as you can for comfort, but be careful that your frets don't start buzzing or that the strings are not coming into contact with pickups or any other parts. If this happens, your strings are too low. If the bridge is the second type, you will need a very narrow Allen wrench to adjust the saddles; you will find the Allen heads on either side of the saddle top.

Need a portable pedalboard for fly dates? Tech 21 has the answer in the form of the Fly Rig 5: a small but perfectly functional pedalboard, powered by an auto-switching adaptor, so it can be used anywhere in the world. What you get is the equivalent of five stompboxes. The SansAmp is at the heart of the Fly Rig. Stomp on its footswitch and its six mini control knobs light up blue. You get level and drive knobs, three-band EQ and a spring reverb emulation based on the Boost RVB pedal. In front of the SansAmp, you get the Plexi section, based on Tech 21's Hot-Rod Plexi pedal. One footswitch emulates the natural overdrive and distortion of a late-60s Marshall, with sound dialled in with level, tone and drive controls. A second 'Hot' footswitch brings in up to 21dB of boost and can be used independently of the Plexi distortion. Last in the signal chain is the DLA, a delay with tap tempo. The Fly Rig 5 is an extremely functional unit that contains arguably the most essential effects - you can plug it into a guitar amp or straight into a PA or mixing desk. It's also a life-saver should your equipment go down at the last minute, as well as being the answer to the prayers of guitarists who need to travel light.

The most common way that bass players connect their instrument to their bass amp is by using a 1/4" patch cord, a standard signal cable used in music and audio applications. Some bassists plug their bass into a small wireless transmitter about the size of a pack of cards, which can be clipped to the strap or to their belt. The transmitter transmits the bass signal to a receiver that is plugged into the amp. Bassists playing in large venues with complex stage set-ups, or a stage design where there is a large distance between performers, or players who like to dance or go out into the audience during the performance, may use wireless transmitters to avoid the risk of having their cable become disconnected while they move about on stage and give themselves more freedom. Another reason that some bassists use wireless transmitters is if their stage setup requires a long cable run between their bass and their amp. Long cable runs can weaken the strength of the signal and can adversely affect tone and sound quality.
In the early 1950s, pioneering rock guitarist Willie Johnson of Howlin' Wolf′s band began deliberately increasing gain beyond its intended levels to produce "warm" distorted sounds.[3] Guitar Slim also experimented with distorted overtones, which can be heard in his hit electric blues song "The Things That I Used to Do" (1953).[8] Chuck Berry's 1955 classic "Maybellene" features a guitar solo with warm overtones created by his small valve amplifier.[9] Pat Hare produced heavily distorted power chords on his electric guitar for records such as James Cotton's "Cotton Crop Blues" (1954) as well as his own "I'm Gonna Murder My Baby" (1954), creating "a grittier, nastier, more ferocious electric guitar sound,"[10] accomplished by turning the volume knob on his amplifier "all the way to the right until the speaker was screaming."[11]

Read Full Review This electric guitar offered by Epiphone is absolutely on the budget when it comes to and looking for a markdown price decent sounding Les Paul style electric guitar. The guitar can be bought individually to pair it with an amplifier of choice or as part of the Epiphone Les Paul Special II guitar package that comes complete with a strap, guitar cable, plectrums, gig bag and a small 10 watts Electar amplifier to already begin playing right out of the box.
You might expect PRS's budget take on its venerable Custom 24 to pale in comparison to the real deal, but that certainly isn't the case. Considering the price, this is one impressively put-together instrument; we scoured our review model for signs of the guitar's price tag, and all we could find was a slightly loose vibrato arm fitting - a minor point. Like the traditional USA-made Custom 24 design, there's no scratchplate, so the SE Standard 24's electronics are installed in a cavity. The non-locking SE-level tuners are smooth-handling, and visually, you'd struggle to distinguish the vibrato from top-end PRS guitars. The SE Standard isn't quite as refined or sleek a playing experience as PRS's S2 and above models, courtesy of the chunkier Wide Thin profile, higher action and slightly creaky vibrato response, but a more player-personal setup helps to rectify that. The tones are here, though: searing solos, toasty rhythms and coil-split quack are all within reach – at this price, it's an impressive performance from one of the best electric guitar brands in the market.
Harmoniser – a frequency-based effect that sounds like a second guitarist is playing in harmony with the original guitar signal. The effect is created by doubling the guitar input signal and then shifting the pitch of the double up or down at a certain interval (usually a 3rd, 5th or octave). The harmony effect is often used in the metal and hard rock genre to play solos.
• Now let's add some slap-back room delay. In the seventh insert (which, incidentally, comes post‑fader in Cubase, as does insert eight), go to Delay/StereoDelay. In the left channel, try setting Delay to 1/16T, Feedback to 6.5, Lo to 50, Hi to 15000, Pan to ‑100, and Mix to 20, and enable Sync, Lo Filter, and Hi Filter. Use the same values for the right channel, but with Delay at 1/16, Feedback at 7.3, and Pan at 100.

It wasn't long before Southland went to hell in a hand basket. I would like to acknowledge the professionalism of people like the late Lee Ingber who was quality minded enough to know that junk will ruin any business. It's too bad that the last owners of Southland never learned that, even as their company faded into the sunset of the graveyard of greed.

Two-handed tapping was the hoariest of heavy-metal clichés until Marnie Stern reclaimed the concept on behalf of indie-prog bedroom shredders everywhere. No one would ever confuse Stern’s chops with Eddie Van Halen’s, but that’s kind of the point: If Stern’s shredding exudes the agreeably skewed internal logic of the self-taught, it also allows her to utilize the two-handed technique far more creatively than the pseudo-classical chest-puffing that usually comes with Dokken territory.
as cool as it sounds to say that robert johnson has influenced everyone since him, directly or indirectly, is just nonsense. sure he was a legend in his own right; but a lot of that has to do with his life being shrouded in mystery. yes, he has influenced some players, way back when, but there were so many more players influenced by electric blues; chicago and texas blues, not delta blues. i understand he was somewhat of an innovator, and that is very important, but i think so called ‘music critics’ have over-blown it a bit in the reverence department for fear of being labeled un-hip. dave marsh, the ‘rolling stone’ critic is a perfect example. he claims johnson as one of the most gifted players of all time. but he dislikes david lee roth, singer in ‘van halen’, so right away edward van halen, guitarist in that group is marginalized with: “the basic 12 bar-blues on the louie-louie thump theme” to describe his playing. lol. to sum it up, whenever a critic uses the phrase ’12 bar blues’, you can pretty much assume he has no clue about what he talking about….best wishes.
Charlie Christian and Django Reinhardt are generally held to have initiated the use of the guitar to play melodies and improvisations over other instruments, the former using an early form of amplification, the latter playing forcefully on an acoustic guitar. Over the years, jazz guitarists have been able to solo in standard jazz idioms, such as bebop, cool jazz and so on, while in also absorbing influences from rock guitarists, such as the use of electronic effects.
Distortion is a feature available on many guitar amplifiers that is not typically found on keyboard or bass guitar amplifiers. Tube guitar amplifiers can produce distortion through pre-distortion equalization, preamp tube distortion, post-distortion EQ, power-tube distortion, tube rectifier compression, output transformer distortion, guitar speaker distortion, and guitar speaker and cabinet frequency response. Because many factors beyond preamp distortion contribute to a particular guitarist's sound, recording engineers and PA system techs typically put a microphone in front of the guitar speaker, rather than only use the guitar amp's pre-amp out signal. A sound engineer or music producer may send the DI out signal from the pickups to a separate track at the same time, so they can re-amp the signal later. In contrast, it is fairly common to use a DI box with electric bass.
Depending on your choice of guitar kit you may be required to perform a small amount (or a large amount) of work wiring the guitar. This typically involves a soldering iron and a basic understanding of guitar electronics. You will also need to be able to follow schematic diagrams of pickup configurations. It’s not a one size fits all job either, wiring up a Telecaster is different to wiring a Stratocaster and a Les Paul or hollow body is different again.
Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
With this modification, you will not get any parallel sounds which are so typical of the "Fender sound". (For example, "Sultans of Swing" is played with the middle and bridge pickups in parallel). The pickups in series gives you a fuller sound with much higher output, which is good for distortion. If you want a more versatile modification, go to the Wolf Wire™ Modification which will give you series choices, parallel, single coil, and out of phase options.

Here we have a well aged Vintage Washburn D12/br from 1989 its a D-18 type with a cedar top and man does this cedar top sound great…it was surprisingly sound and deep for a late 80s it has a mature balanced tone…I like it with its pretty good bass response and all. Its structurally great no cracks and no playability issues what so ever its neck and alignment integrity is also excellent as the action is good and the guitar is as a result easy to play. Cosmetically this guitar has been around the block its no sissy its stood the test of time and its previous owner and still all in all with all its obvious nicks and scratches and various doinks man it looks pretty darn vintage COOL and I loved it I thought you might like it too just take a good look for yourself if your the type that likes a well warn in vintage guitar and you don't really mind that it has some extra character and soul this just may be a guitar you might appreciate….. its own beauty from life playing and enjoying the music experience this guitar has been well loved and played yet it is no where near warn out it has years of life left in her she just wants to really sing for someone and in my assessment she’s ready to be enjoyed for another 30 years or more! Very cool vintage Washburn Dreadnought guitar. Its neck is straight and has the proper relief its Tuners are real good sealed gears and doing an excellent job to this day, This one has the medium slim taper neck with the Diamond volute like the old Martin style…nice touch Washburn. Mahogany Back and sides and neck with rosewood fingerboard its neck width is 1-11/16ths at the nut. This a a well built good player folks if you don’t mind it not being exactly mint cosmetically its actually beautiful in its own vintage appeal. Any questions or to make the purchase you can contact Joe at: JVGuitars@gmail.com.

I understand and concur with you totally, as a sound man, I love it when everyone is direct, it makes life so much easier. every mike you eliminate adds roughly 3 db headroom overall to the max level without feedback. But as a bassist, and a Chapman Stick player, ampless just feels too flat and lifeless for me. I recently worked a John McLaughlin and Fourth Dimension gig in Bali, Both John, and Gary Husband went direct, it was wonderful. The bassist was amped though, for the same reasons I prefer to be amped If I am playing bass. Nathan East is another who doesn’t like bass in the monitors, preferring the sound and dynamic control of having his own amp. By and large, I find that generally (with some VERY notable exceptions) people who grew up playing concerts “back in the day” prefer amps, subsequent generations of people who grew up playing with small “portable” amps (think SWR, etc.) generally don’t mind going ampless, they have pedal racks, and have the sound they want from that. They don’t miss the air moving on their strings, because they never had it.. Perhaps because I am a dinosaur, I need the feel of 6, or 8 10s behind me, (or at least 2 15s), the resonance effect it has on the strings, makes my instrument come alive and it breathes with a feeling no pedal rack can duplicate. You should see Bootsy Collins’ rig, he had 2 1x18s, 2 2x15s, and 2 4×10 boxes, and that is what he calls his “small gig rig”! I guess I grew up regarding the amp as an integral part of my instrument, without it, playing feels, well, like you don’t have an amp! Even in the studio, I run a DI into the board, but I play through an amp for my own feel. Peas.
On guitars with bound fingerboards, shrinking of the binding can produce a gap large enough to catch the treble E string when pulling it over the edge. If only a few our present I will fill the gap to eliminate the problem. If the binding shrinkage has introduced gaps at every fret, the board should be re-radiused to eliminate all gaps and re-fretted.

The most common way that bass players connect their instrument to their bass amp is by using a 1/4" patch cord, a standard signal cable used in music and audio applications. Some bassists plug their bass into a small wireless transmitter about the size of a pack of cards, which can be clipped to the strap or to their belt. The transmitter transmits the bass signal to a receiver that is plugged into the amp. Bassists playing in large venues with complex stage set-ups, or a stage design where there is a large distance between performers, or players who like to dance or go out into the audience during the performance, may use wireless transmitters to avoid the risk of having their cable become disconnected while they move about on stage and give themselves more freedom. Another reason that some bassists use wireless transmitters is if their stage setup requires a long cable run between their bass and their amp. Long cable runs can weaken the strength of the signal and can adversely affect tone and sound quality.

This comprehensive set contains the most detailed version of the Yamaha C5 Grand plus a full compliment of performance sounds to cover all your needs from pads, strings, EPs, orchestra, synth, organs, guitars and many other instruments. At 971mb in size (with 592mb dedicated to one outstanding piano with five brightness levels to choose from)  it is designed for the fussy pianist who also wants a full bank of sounds at their fingertips.
Synonymous in the electric guitar industry, the Gibson brand continues to produce some of the best electric guitars on the market, including the Les Paul Studio. Designed with a classic look that maintains the appearance of a vintage quality, this electric guitar comes with a neck that is slimmer than most traditional models, allowing for ease and smooth transitions when switching between notes. The guitar utilizes an upgraded version of humbucker PAF to cancel out any outside interference that detracts from the quality of the sound, while maple and mahogany wood are combined to deliver both definition and sustainability. Other features include traditional tuners that can be manually altered, a Graph Tech Nut for precise spacing between strings, and a neck heel with the class Les Paul design. Well reviewed and great for the price, the Les Paul Studio is one of the best electric guitars available if your cash flow allows.

Whether playing scabrous grindcore in Napalm Death or juxtaposing smooth, almost Pink Floyd–like blues solos over the surgically precise death-metal riffage of Carcass, Steer always managed to find a way to inject some ear candy into genres known for avoiding it. By 1993, when Carcass released Heartwork — its last true death-metal album (before embracing death’n’roll) — Steer had masterminded a hook-filled songwriting style that perfectly balanced metal virility with honest-to-God melody, something countless bands are still attempting to copy.

This fully analog simple plug and play guitar amplifier is enjoyable to play with. It has a switchable clean and dirty channel with separate volume knobs that shares a 3-band EQ treble-mid-bass and gain control to add more grit so players can arrive on a crunch and lead sounds. Other useful attributes on the amp are set of input jacks for a headphone and audio source to play along with a backing track.
Ask yourself this question right at the beginning. Before buying a guitar you have to make sure of the kind of style you are comfortable in- be it the jazz and blues or be it country, soul or pop. Only once you are sure of the kind of style you are in for, you should move forward to buying your new guitar. Make the wrong choice, and you will have to regret for it later on.
I got this guitar just a couple months ago, not knowing much about guitars and not really knowing much about quality or anything I did a lot of research about what would be the best purchase for the right price for a beginner guitarist.. and I stumbled upon the Yamaha FG700, Fantastic reviews and ratings for beginners with great overall quality and overall sound, especially for the cost. I did a bit more research, comparing instruments and what not just to be sure I didn't purchase something that was made out of cardboard and shoe strings when I stumbled upon the Yamaha FG800, which was said to be the upgrade of the 700. I did some reading and though it didn't have as many reviews it was said to have improved sound and durability for the exact same price. Knowing that Yamaha has pretty much always been rather good quality

Now imagine the puddle again, but this time imagine some wood blocks (12 inch long 2x4's for those of you with rusty imaginations) that are placed on their sides in the puddle in the shape of a three-sided box with the open side facing the pebble's point of impact. The radiating lines go in to the box and bounce back or reflect off the walls. Soon, there are so many lines radiating around in that imaginary box that they all collide with each other and become a random, jumbled mess. Eventually, the size of the lines and the number of them diminish. That my friends is reverb.

"I wanted my guitar to sound like Gene Krupa's drums," Dick Dale said, and the hyperpercussive style he invented for his jukebox wonders – including a juiced-up arrangement of the old Greek tune "Misirlou" – pioneered the sound of surf rock. Dale played as fast as possible, at max volume; Leo Fender once attempted to design an amp that wouldn't be destroyed by Dale's sheer loudness. "His arrangements were really complex, really unruly," said Rush's Alex Lifeson. "It was all staccato strumming reverb, but with a reverb that just sounded so cool."
I am not completely sure this tuner info is completely accurate. Sorry about that... Remember as a general rule Grovers were used on style 21 and above, and Klusons were used on style 18 and lower. There are some exceptions (like during 1940 to 1945, and pre-1930s). On pre-war Grover tuners, there are basically two types used on Martins: G-93 (round button 'butterbean') and G-98 (scalloped buttons, aka "Sta-Tite"). Both came in 6:1 and 12:1 tuning ratios, with 12:1 coming about in 1938 (and replacing the 6:1 ratio). The post-1938 12:1 ratio Grovers can be always be identified since they combine the thin seamed tuner buttons with the long pointed baseplate, and the tuner gear is screw mounted. The 1938 and prior Grover G98 tuners have a thin seamed button combined with the a square tipped baseplate, and always had the 6:1 ratio. They also had the riveted tuner gear. Ater WW2 the G98 was reintroduced with pointy baseplates and a screw mounted gear, and this was copied by Waverly, Grover, Schaller, etc after the war. Also Martin used original Waverly tuners (open back, rounded base tips, butterbean buttons) after WW2 on 00 and 000 and some D guitars style 18 (and some 28) in the late 1940s and 1950s.

As I’ve mentioned before, the topic of guitar pedals can really be a rabbit-hole and some people get really, really into them. They are very often the key to the tone you keep chasing after. However, at the end of the day, a lot of your sound depends on your ability to play your instrument, so please don’t neglect practicing your instrument over trying out different effects.
Yes, don't do it. Take her to a music store and let her play whatever they have that's within your price range, and let her take home the one she most enjoys playing. You don't need to spend a ton. I just bought a used Breedlove for a similar gift, and it was under $200 at my local music store. The key is finding one she doesn't want to set down. That's what will get her playing.
Distortion and overdrive: Distortion and overdrive units re-shape or "clip" an audio signal's wave form so that it has flattened peaks, creating "warm" sounds by adding harmonics or "gritty" sounds by adding inharmonic overtones. In tube amplifiers, distortion is created by compressing the instrument's out-going electrical signal in vacuum tubes or "valves".[52][53] Distortion pedals produce perfectly flattened peaks or "hard" clipping. Overdrive pedals produce "soft” tube-like distortion by compressing the sine wave without completely flattening it. Much like tube amps, overdrive units produce "clean" sounds at quieter volumes and distorted "warm" sounds at louder volumes. Distortion and overdrive pedals may either be transistor-based or digital.[54][55] While distortion pedals are most associated with electric guitar, they are also used with bass guitar (fuzz bass), Hammond organ and electric piano.

1) The tuning keys (machine heads) are as bad as it gets and if you're planning on keeping this guitar for a while and making it really workable plan on changing them ASAP and throwing the others away as far as you can throw them - Shame on you Yamaha, you could have at least used some half decent tuners!! These are an insult to your good name. So I replaced mine with Grover Sta-Tite V97-18NA (with brass colored gear) which are the best tuners "for the money" ($40) for any guitar especially for this one. However, be aware that you will also need to replace the Yamaha bushings because the I.D. is too small for the Grover post and, unfortunately,the Grover bushing O.D. is too small for the holes in the Yamaha headstock. The correct bushing that will allow an easy proper fit of the Grover tuning pegs to the Yamaha APXT2 is Kluson MBG65N or B bushings (Google it). If you elect to do this instead of letting your friendly Luthier do it, be advised that when you knock out the stock Yamaha bushings, since they're press fit it may have a tendency to split the wood on the top of the headstock. This one modification will bring this guitar from the level of a toy trying to be a serious contender to the best little guitar that money can buy.

The guitar is hand-made by Martin's top luthiers, using exotic cocobolo wood for the back and sides, mixed with a more conventional solid sitka spruce top. As expected from a high-end instrument, this guitar features impressive visual appointments, most notable of which is its ivoroid binding, beautiful rosette and fretboard inlays. While its price tag and looks may push you to just hide this guitar in the closet, know that this instrument is built to make music in the road or in the studio. Martin employed modern bracing and construction techniques to ensure the guitar stays reliable, beautiful and great sounding for a long time. Those that are lucky enough to own this guitar have themselves a treasure that they can pass down to the next generation of players.
Collings Guitars is an Austin, Texas based stringed instrument manufacturer. The company was founded in 1973 by Bill Collings who is “one of the most recognized and respected names amongst aficionados of modern acoustic instruments.”[ Their acoustic guitars have been highly regarded for decades.[2]In addition to acoustic guitars they also make electric guitars, archtop guitars,mandolins, and ukuleles.
The Boss MS-3 is a multi-effects pedal that is not meant to replace your favorite pedals, rather it is meant to help you make better use of them. It has more than enough effects (112) for most musical applications, but what makes it special is its old school approach that lets you incorporate pedals and amps into your rig, along with its built-in effects.
EBow is a brand name of Heet Sound Products, of Los Angeles, California, for a small, handheld, battery-powered resonator. The Ebow was invented by Greg Heet, as a way to make a note on an electric guitar string resonate continuously, creating an effect that sounds similar to a bowed violin note or a sustained pipe organ note. The resonator uses a pickup - inductive string driver - feedback circuit, including a sensor coil, driver coil, and amplifier, to induce forced string resonance. The Ebow brand resonator is monophonic, and drives only one string at a time.

Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
My brother owns a Norma acoustic guitar modeled on the Gibson Hummingbird. He bought it used in the mid 70s. Solidly built but only average sound. I would guess that like many Japanese made guitars from the 70s, Norma was not a "company," but simply an American sounding brand name chosen by a larger Japanese instrument manufacturer to market their guitars in the USA. I own a mid 70s Penco acoustic, same deal, name was used on Japanese made guitars marketed through the Pennsylvania Music Company, thus Penco.
No matter your vision, SparkFun's products and resources are designed to make the world of electronics more accessible. In addition to over 2,000 open source components and widgets, SparkFun offers curriculum, training and online tutorials designed to help demystify the wonderful world of embedded electronics. We're here to help you start something.

Drop A in D standard variation - A-G-C-F-a-D: Used by Mastodon on most of their first album (Remission) and on some songs on other albums. Also utilized by Periphery on the song "Zyglrox" as well as "Alpha" and "The Bad Thing." Also used on occasion by Black Label Society, who previously tuned it a half-step up, which Alter Bridge also utilizes on some of their songs such as "Broken Wings", "Come to Life", "I Know it Hurts", "Still Remains", "Breath Again", and "All Hope is Gone." Creed, Architects, and Sevendust all use this tuning tuned a half-step down on their songs "Bread of Shame", "Early Grave", and "Home" and "Chop" respectively, with the latter also tuning down a full step for the songs "Death Dance" and "Not Today". Danish industrial metal band Raunchy used this tuning tuned one and a half-step down (F#-E-A-D-f#-B) on the song "Dim the Lights and Run" from the album A Discord Electric. Wage War also utilize this tuning one whole step down for songs like "The River" and "Spineless" off their album Blueprints.
It’s safe to say a wah-wah pedal will be your first stompbox if it’s not already. The wah is a sweepable fixed bandwidth filter that has a treadle you rock back and forth producing vowel-like inflections. The phrasing possibilities are only limited by the player. These days, you have an array of major as well as indie pedal builders who make incredible wah pedals such as Dunlop, Vox, Fulltone, Teese, Xotic, and Wilson Effects.
I have been playing for two years. I use to play (and still have) a fender squier. Today I bought a Lyle on impuls. I wasn't planning on buying one, i just walked in and it looked so beautiful. I have a feeling it is about 10 years old or so, but the sales man didn't know much other than it was a Lyle and it had new tunning pegs on it. I got it for 150$ and i would REALLY love to know more about it. Thanks.
The Yamaha LL16 gives you high-end features for a lot less money, starting off with its solid Engelmann spruce top and solid rosewood back and sides. This all solid body results in richer and more detailed acoustic tone, something that you will have to pay top dollars for from other acoustic brands. It also sports a slightly smaller body that gives it an elegant appeal, adding to its already favorable affordable price and top-tier specs.
Yes, a Martin guitar under $500. The Martin LX1E features a sitka spruce top with mahogany back and sides. It carries the Martin name, which  means high quality is expected. Being that it is closer to out $500 limit, you can expect this guitar to deliver on tone. This one is a direct competitor to the Baby Taylor. People that own both have said that they like the sound of the Martin better, describing it as bright and crisp. The tradeoff is the playability is not rated as high as the Taylor. See more pictures and reviews of the guitar here.
Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.
The first signs that the times they were a-changin’ began to appear in 1960 with the debut of the T-60 and the EB-1. The T-60 (named for the year) was a more-or-less Jazzmaster-shaped guitar with an extended upper horn and backward-sloped lower cutway. Even the pickguard was similarly shaped, although not tripart, bearing three pickups, the bridge pickup angled slightly like a Strat. Controls included one volume and one tone and a chicken-beak rotary selector. This had a covered bridge/tailpiece assembly. The headstock was a long, extended variation on a Fender Strat head, with six-in-line tuners, with a round sticker Teisco logo on the round tip. Fingerboard inlays were the soon-to-become-signature rectangles along the upper edge. However, the most striking detail was the so-called “monkey grip,” a handle-shaped cutout on the top of the lower bout. This design would continue through the ’60s (two decades before Ibanez would introduce it on its JEM guitars!).
It is traditional to think that learning guitar initially involves learning lots of chord shapes. I agree that this can be a distraction, and for me, it made the guitar seem more complicated than it is. As well as (or instead of) learning lots of chords 'by rote', an alternative would be to learn a few scales, and learn how to construct chords from those scale shapes.
Alternatively – and often most effectively – you can fix phase issues in the digital realm. Record your two-mic signal on two separate tracks, then zoom in on the sound waves in each of the two channels in your DAW’s editing window until they are huge and you’re seeing the full up-and-down crests and troughs of the waves. Now, drag or nudge the sound wave of the ambient mic forward (i.e., to the left of the screen) a few milliseconds at a time until the sound waves line up perfectly. Listen again, and you should hear a very different blend that is fuller, richer, and more “together.”

Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.

“Volume pedals work well just before any delay or echo effects, as you can fade in and out of delays smoothly. A volume pedal at the very end of the chain just before the amp input will control master volume, and can also be used as a mute. Reducing the signal at this point will also reduce any noise. I put clean boosts right at the end—also just before the amp input—to ensure that any effects earlier in the chain would not be overloaded.”
While most instruments made by Harmony and Kay were much cheaper than Martins, Gibsons or Fenders, the upper-level, more elaborate ones actually cost more money than some lower-end and even mid-priced Gibsons and Martins. A top-of-the-line Harmony, Kay or Silvertone made by Harmony featured inlay, binding and multiple pickups, switches and knobs, and cost more than a Les Paul Junior or Special and in some cases fully as much as a Les Paul Standard. While one of these instruments in near-perfect condition today might fetch $1,000 or more, it certainly would not have been nearly as good an investment as spending less to buy a Les Paul Junior and sure enough not as good an investment as spending an equal amount to buy an original 1959 sunburst Les Paul Standard.
Route the body. You’ll need to make a cavity (a hole that goes partly through the body of the guitar) in the back of the guitar to fit the electronics for the volume, tone, pickup selection controls. You will cover it later with a bit of material (usually hard plastic). You’ll also need one cavity in the front of the guitar for each of its pickups. Rout the pickup cavity (or cavities) to the depth recommended by the manufacturer.[9]

Some emulator designs include switchable filters, enabling them to simulate open or closed-backed speaker cabinets, and can come very close to the sound of a close-miked amp, while ambience can be simulated using a reverb processor or plug-in. Even if the amp has a good spring reverb, a little additional digital ambience (mainly early reflections) will help create the illusion of the amplifier being recorded in a room.
Why We Liked It - The price on amazon is undoubtedly pretty high, which means that this Gibson is going to be for serious players and professionals only. You'll need to make sure you have gig bags or a guitar case in hand for protection! However, if you’re looking for the absolute best that the electric acoustic market has to offer right now, then there probably aren’t many contenders to the J-200’s crown.
If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.
• Brute force game : Offers the same realistic engine that can be found in STRUMMED ACOUSTIC 1 and 2 – ideal for chord accompaniment. It also contains riffs and a new game mode by picking Picking: just play a chord for creating very convincing arpeggio patterns. Reproduction of these new types of patterns should be completely familiar to users of STRUMMED ACOUSTIC.
Folks, it's not a Fender that you're buying here. It's a kids guitar made to the scale of little hands. It will hold a tune once you stretch the strings and intonate it. The amp is a little muddy sounding, but that can be corrected by adjusting the volume levels on the amp and guitar. Don't expect Line6 quality! The wood on the neck we received was actually a very good looking cut of wood. Overall, I'm happy with it.
It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join[citation needed]. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.
{"id": "H91419", "categoryId":"site5AAH", "name":"Artstar AS153 Semi-Hollow Electric Guitar", "pageUrl":"/Ibanez/Artstar-AS153-Semi-Hollow-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Artstar-AS153-Semi-Hollow-Electric-Guitar-Jet-Blue-Burst/H91419000002000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "msrp":"1,377.76", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"879.99", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"15", "brand":"Ibanez", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"7", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LAAA,site5LFMIC,site5HBA", "stickerText": "Top Rated", "isVintage": "0", "outletonly": "2", "checksum":"637145126000", "priceVisibility": "1", "itemType": "New"}
This 248 page book is part of a series of similar volumes, including The Guitar Grimoire: A Compendium of Formulas for Guitar Scales and Modes, The Guitar Grimoire: Progressions & Improvisation, The Guitar Grimoire: A Compendium of Guitar Chords and Voicings, and so on. You get the idea. Master a few of these and you’re going to to be in excellent shape.
Beginners face this very common problem when they go for the cheaper options. The strings are usually far from the fret board, and due to lack of knowledge, many think that this is how it was meant to be. Such a guitar brings pain to the fingers since force has to be applied to lower the string to the fret board so as to produce sound. All these difficulties make it very hard for a beginner to learn the guitar. For you to learn the guitar quickly and without problems, you should get a guitar whose distance from string to fret is less.
As we discussed in our post about cheap effects pedals, price does not always indicate quality. As with buying anything, simply picking out the most expensive item isn’t the way to ensure you get the best product for your needs. Sure, you might really want to own a Ferarri, but have you ever spent any time driving one around town to pick up your groceries? Fortunately, we live in an era of truly great, yet inexpensive, guitars. There are lower-priced riffs on old classics right alongside purpose-built value axes. You don’t have to settle for that rattling pawn shop special. With a few hundred dollars you can buy a guitar that will suit all your needs and last for many years to come.
The Line 6 POD Farm program is famous for its amp simulation, however many users have realized that the quality of its modeled effects are equally superb. Some even use the POD Farm strictly for its effects! It has a huge collection of FX - up to 94 - and it modeled some of the most popular stompboxes including the MXR Phase 90, ProCo Rat, Uni-Vibe, Arbiter Fuzz Face and Big Muff Pi. It also includes modeled versions of old analog devices like the EP-1 Echoplex. Setting up is a breeze with its simple carousel-style interface, which lets you visualize your signal chain. Current Retail Price $49.00
I'm also retarded. And my father used to beat me with my decca.... Im also the ex-ceo for decca inc. Your guitars are worth mere pennies.... litterally, Deccas were originated in the late 60s for young children to pretend to be their idols.. Deccas were packaged in cereal boxes as ready-to-go kits.. you assembled them yourself... they are made from old left over popsicle sticks.. So Im glad to put your high hopes and sleepless nights of wondering whos going to come up to you and tell you your old guitar is rare and worth thousands... Because frankly it will just never happen..

Never buy a guitar for its looks alone. You must buy a guitar only once you have started learning and know your fingerstyle and the genre of songs you will be playing. Most of the guitars last for more than a decade. This is the reason, you must keep all these tips in mind before buying a guitar. Look for the style of your playing before you buy a guitar. A few guitars have a thicker neck which may or may not be comfortable to you. In each brand of guitars, different layouts and designs are available. Look for the series and the design that provide you comfort while playing the guitar.
In 1928, the Stromberg-Voisinet firm was the first company to sell an electric stringed instrument and amplifier package. However, musicians found that the amps had an "unsatisfactory tone and volume, [and] dependability problems", so the product did not sell well. Even though the Stromberg-Voisinet amp did not sell well, it still launched a new idea: a portable electric instrument amp with a speaker, all in an easily transported wooden cabinet. In 1929, Vega Electrics launched a portable banjo amplifier. In 1932, Electro String Instruments and amplifier (this is not the same company as Stromberg Electro Instruments) introduced a guitar amp with "high output" and a "string driven magnetic pickup". Electro set out the standard template for combo amps: a wooden cabinet with the electronic amplifier mounted inside, and a convenient carrying handle to facilitate transporting the cabinet to rehearsals and shows. 1n 1933, Vivi-Tone amp set-ups were used for live performances and radio shows. In 1934, Rickenbacker launched a similar combo amp which added the feature of metal corner protectors, which keep the corners in good condition during transportation.[1]
You can assemble your own system from disparate components, hardware and software, and spend a lot of time and confusion getting them all to work together. But the easiest and ultimately most cost-effective route is to purchase one of the least-expensive Apple Macintosh computers, all of which come with Apple's free GarageBand software installed. This will provide you with a wealth of tools for amp emulation and effects in an integrated environment for multi-track recording and editing (and it includes a wealth of drum machine, synthesizers, and sampled instrument libraries as well.) If you outgrow Apple GarageBand, you can suppliment it by purchasing Apple MainStage for $30 and/or Apple Logic Pro for $200.
It’s hard to conceive a better musical foil for Steven Tyler than his longtime partner and occasional adversary. For more than 40 years, Joe Perry’s monstrous, blues-on-steroids riffs have been Aerosmith‘s bedrock. And his solos, jutting out from “Walk This Way” or slashing boldly through the high-gloss production of later hits like “Janie’s Got a Gun” and “Cryin’,” have a caffeinated energy that’s every bit Tyler’s match. “He had a streamlined style that reminded me of Keith Richards,” said Slash. “And a careless style that’s really cool.”
Distortion, overdrive, and fuzz can be produced by effects pedals, rackmounts, pre-amplifiers, power amplifiers (a potentially speaker-blowing approach), speakers and (since the 2000s) by digital amplifier modeling devices and audio software.[1][2] These effects are used with electric guitars, electric basses (fuzz bass), electronic keyboards, and more rarely as a special effect with vocals. While distortion is often created intentionally as a musical effect, musicians and sound engineers sometimes take steps to avoid distortion, particularly when using PA systems to amplify vocals or when playing back prerecorded music.
While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:
The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.
After music fans heard his impressive blues rock playing on John Mayall’s ‘Beano’ album, they began to spray paint “Clapton is God” on London, England infrastructure. It’s safe to say that Clapton left quite an impression on people. His playing with Cream, Derek and the Dominos, and Blind Faith as well as in his solo work only helped to strengthen Clapton’s legend.
I play a Tele, but I can’t say I’m in love with it. I have this feeling that a Gibson would sound and play differently – perhaps warmer and more mellow – but I have no factual basis for thinking that. It is based more on who I have seen playing different models, and what style of music they are playing. This is what I think most of the differences guitarists imagine come down to – a lot of preconceived notions, reinforced by vague generalizations (like the ones in this article) and marketing hype. But I readily admit I could be wrong about that.
Introduced around the same time as the White Falcon, the Duo-Jet (6128) became another hit for Gretsch, especially after a young George Harrison played one with The Beatles in the early sixties. While finding an original Gretsch is very expensive, the brand still makes faithful reproductions of most of its historic models and are popular with guitarists with a penchant for vintage.
As I’ve mentioned before, the topic of guitar pedals can really be a rabbit-hole and some people get really, really into them. They are very often the key to the tone you keep chasing after. However, at the end of the day, a lot of your sound depends on your ability to play your instrument, so please don’t neglect practicing your instrument over trying out different effects.
The Ibanez DT-250 is a perfect guitar for shredding. The basswood is light so you can run all over the stage, jump off your stack, and still have energy to dive-bomb. Even do the splits. Notice that was a “you can.” These were outfitted with a pair of blade-pole V5 humbuckers, produced toward the end of Japanese-made pickups, before Ibanez started working with DiMarzio. They are smokin’ hot! This guitar almost leaps out of your hand when you plug it in. The Japanese improvements on the locking vibrato were also impressive, and this combines the precision of a Floyd Rose with the feather touch of a Kahler.

While most single-coil pickups are wired in parallel with each other, it is possible to wire two or more of them in series, producing a fuller and stronger sound not unlike that of a humbucker.[26] This is a popular modification for instruments with two single-coil pickups like the Fender Telecaster and the Fender Jazz Bass. For the former, special 4-way switches are available to replace the stock 3-way switch and provide a series wiring position.[27]

In Chicago in the sixties, "the rules had been laid down" for young, white blues bands, Mike Bloomfield told Rolling Stone in 1968. "You had to be as good as Otis Rush." That wasn't easy. A Mississippi native who moved to the Windy City in the late Forties, Rush was a fearsome electric guitarist – with a grittytreble tone and lacerating attack, like a gunslinging cross of Muddy Waters and B.B. King – as well as a knockout songwriter. Along with guitarists like Magic Sam and Buddy Guy, Rush helped create the more modernized, R&B-influenced approach to Chicago blues that came to be known as the West Side Sound. Rush's impact on later generations was enormous: His late-Fifties and early-Sixties singles were go-to covers for Led Zeppelin ("I Can't Quit You Baby"), John Mayall ("All Your Love [I Miss Loving]") and the J. Geils Band ("Homework"), while Stevie Ray Vaughan named his band after Rush's lethal '58 lament "Double Trouble."
Not all guitars sound the same. The type of pickups, strings, wood, and body style all dictate the sound a guitar makes. One of the most important decisions a guitarist can make is whether to get a solid body, semi-hollow, or hollow body guitar. A solid body has a cutting tone with plenty of sustain, whereas a hollow body has a warmer, more rounded sound.
This diagram shows 3 single coils wired in parallel, allowing seven tone choices. The typical 3 single coil guitar contains a 5 way rotary switch which allows you to get 5 sounds - each single coil; neck and middle in parallel and middle and bridge in parallel. This modification will give you 2 more sounds - all 3 pickups in parallel and Neck and Bridge in parallel.

The Dolce is a cedar-top, with mahogany back and sides, and the usual set of Savarez Cristal Corum high-tension strings. At 9 lbs and 38” this is a slightly shorter and lighter-weight guitar, which will be more appropriate for a smaller person. This guitar does not come with a gig bag or other accessories, so if you choose this guitar, prepare to make a list of what your instructor of choice says you need.
A guitar recital may include a variety of works, e.g. works written originally for the lute or vihuela by composers such as John Dowland (b. England 1563) and Luis de Narváez (b. Spain c. 1500), and also music written for the harpsichord by Domenico Scarlatti (b. Italy 1685), for the baroque lute by Sylvius Leopold Weiss (b. Germany 1687), for the baroque guitar by Robert de Visée (b. France c. 1650) or even Spanish-flavored music written for the piano by Isaac Albéniz (b. Spain 1860) and Enrique Granados (b. Spain 1867). The most important composer who did not write for the guitar but whose music is often played on it is Johann Sebastian Bach (b. Germany 1685), whose baroque lute works have proved highly adaptable to the instrument.
Some guitarists use identical pickups in each position and still get contrasting sounds from each pickup. Others use different types of pickups, often to balance the tonal tendencies of a particular pickup position. For example, a guitarist might choose a moderate-output pickup in the neck position and use if for clean-toned chords, but opt for a high-output bridge pickup for a louder, more distorted, solo sound. A pickup of that type will probably sound darker than a single-coil, but a player who finds the naturally twangy bridge position a little too bright would welcome that change.
Fuzz pedals provide guitarists, bass players and even keyboard players with a hefty amount of distortion that sounds VERY different to regular distortion sounds. Fuzz pedals make your guitar sound like its pushing your amplifier to the point of blowing up. A fuzz pedal completely changes the sound of your guitar signal into a heavy, fizzy, and extremely noisy sound that, depending on which pedal you choose, can provide a bass heavy noise, to a spitting ‘broken’ amp sound. Think Velcro being ripped apart and you’re somewhere pretty close.
Semi-acoustic guitars have a hollow body (similar in depth to a solid-body guitar) and electronic pickups mounted on the body. They work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Whereas chambered guitars are made, like solid-body guitars, from a single block of wood, semi-acoustic and full-hollowbody guitars bodies are made from thin sheets of wood. They do not provide enough acoustic volume for live performance, but they can be used unplugged for quiet practice. Semi-acoustics are noted for being able to provide a sweet, plaintive, or funky tone. They are used in many genres, including blues, funk, sixties pop, and indie rock. They generally have cello-style F-shaped sound holes. These can be blocked off to prevent feedback, as in B. B. King's famous Lucille. Feedback can also be reduced by making them with a solid block in the middle of the soundbox.