From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.
The ultimate in superb workmanship, total versatility. This deluxe 4 pickup electric will be played with pride by the most experienced performer.  Four simulated split pickups make possible virtually unlimited sound combinations. Powerful magnetic pickups are height adjustable. Ultra fast steel reinforced neck. Head and Rosewood fingerboard bound in White. .22 Nickel Silver frets (plus zero fret), 8 “N” shaped pearl position markers, 4 volume controls, 3 position rotary tone control (high-medium-low), Rhythm-Solo-Switch, 4 slide pickup switches.  Advanced type tremolo arm.  Chrome adjustable roller-type bridge.  Highly polished yellow-to-red-to-black sunburst finish.  Size 41″x14″.

While audio feedback in general is undesirable due to the high frequency overtone, when controlled properly, it can provide true sustain of the sound (instead of using a distortion/compressor to make quiet notes louder, or a feedback of a signal in a circuit as in a delay unit). Several approaches have been used to produce guitar feedback effects, which sustain the sound from the guitar:
Build Your Own Effect Pedal. Mammoth Electronics makes an effort to offer our customers a very neatly packaged and personally customizable effect pedal kit. Each guitar pedal kit comes equipped with everything you need to build your own effect pedal as quickly and inexpensively as possible without sacrificing quality. These DIY guitar pedals kits are designed to make building your own effect pedal easy for everyone from the hobby builder to the manufacturer. All parts are labeled and packaged in the kit for easy identification. Enclosures are fully customizable to the user specification and specially wrapped in a protective foam for safe transit. We’ve provided a wide selection for any effect pedal kit needs you might have. From a simple boost pedals, and fuzz pedals, as well as overdrive, distortion, and compression kits. We also have a wide range of modulation kits, including delay, reverb, tremolo, and phaser effect pedal kits. If you need a quick fix or a more complex guitar pedal kit, Mammoth Electronics offers a variety of options making it effortless to build your own effect pedal with a sound quality that will make an impression. We work hard to build relationships with only the best brands for our customers. These strong relationships allow us to provide extremely competitive pricing on all of our DIY guitar pedals kits.. We’re confident you will save yourself money & time if you build your own effect pedal with Mammoth Electronics. Mammoth Electronics offers customized DIY guitar kits and effect pedal kits that allow you to experiment with, create and amplify your own taste of music, without compromising on the sound quality. With added protective layering, these kits are safe for transportation and transit. We’re passionate about helping our customers build the best effect pedal possible so please Check out our Facebook page where you can provide feedback, share tips or ask any questions you might have about your latest projects.
Taylors are okay as guitars go, but... I've owned three, sold them all in mint condition and lost considerable coin in doing so. I think they belong on this list because they charge hand made prices for MASS PRODUCED guitars. Don't believe me? Take the Taylor that you own and do a search for it on eBay. That's right, at this very moment there are hundreds of guitars just like yours for sale on eBay. And that's only checking this one sales venue! These guitars are worth half of what you paid because the market is saturated with them. Taylor cranks out hundreds of them per day and 100's of thousands per year. If you're shopping and seriously considering a Taylor, you can get comparable quality and far better value elsewhere. Choose carefully and you'll see your investment go up in value. Aside from some special, collectable models of Taylor, you will loose money on this brand.

It depends on whether you are playing with someone, or you just wanna start to play home in your bedroom. If you play with others, you need an amp that can play loud enough to follow the bass and especially the drums. Marshall make some great tubeamps, but also Vox make some great amps, where this one on 40 watt with effects incl are real good. Sound like a tubeamp, and have a 12ax7 in the frontamp.

Since 1977, Dean Guitars has been a leading guitar company manufacturing the highest quality electric guitars, acoustics, and bass guitars for musicians of all ages and at all price ranges. From guitar legends to beginners, we offer a choice for any music genre or style. Browse guitars and more all packed with a limited life-time warranty. Get Your Wings today!

Depending on the type of music you're playing, you may actually want your compressor pedal at the end of your chain. For example, if you're playing country music, a compressor pedal at the end of the chain squashes everything, regardless of the effects you're using. With rock music, on the other hand, it typically works better right after the filter pedals.
It's always hard to rate amps when mixing high gain with vintage, boutique amps and the mass produced monsters, but including S.S. and digital technology seems to be a unrealistic stretch. That being said, this manufacturer is making some of the best sounding vintage type tube amps I've heard to date. their lineup of vintage Fender style amps are all excellent, and considerably more affordable and reliable. If you are a fan of the tweed, black and silver faced gems, you have to give Victoria a try. If you prefer something with a unique spin they make their own unique creations as well and they are all serious tone machines. In so far as tube amps go, these guys are definitely in my top five. Speaking of boutique, where is Carr?
The final pillar in the temple of electric guitar production is the semi-hollow guitar. Just as the name suggests, these guitars do have some chambering in the body, but they aren’t completely hollow. In an ideal world, a semi-hollow guitar will have the biting, singing tone of a solid body guitar, but can also achieve the same smooth fullness of a solid body. However, that simply isn’t the reality for many semi-hollow bodies.
The tone controls compensate for and complement the somewhat lifeless and mostly midrange-y character of the average guitar pickup. The gain control, often designed with a pull-boost, basically excites and heats the preamp tubes, which along with judicious use of both the amp and the guitar’s tone controls will begin to produce much of the sonic seasoning and flavor that guitarists and their fans crave as it flows from the speakers.

{ "thumbImageID": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "defaultDisplayName": "Ibanez AEG10NII Nylon String Cutaway Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51351266816534", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black-1351266816534.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tangerine", "sku": "sku:site51351266816747", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine-1351266816747.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine/H90907000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The OO-18E was basically the small-bodied OO-18 acoustic with mahogany back and sides, spruce top, and the ring-mounted DeArmond tucked right at the end of the fingerboard. These featured one tone and one volume control, with large two-tone plastic knobs situated down on the lower treble bout. The first prototype was serial number 166839. OO-18Es were produced from 1959 to 1964. Around 1,526 of these were produced.
The neck wood is used for the headstock and for the back of the neck (where your thumb rests when playing the instrument). Be careful not to confuse the neck wood with the fretboard wood, as they are separate and different. All our necks are handcrafted from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.

Harmony Hollywood H38- OK, here's the one we will sell. She's about the same as above but with opposite color combo. This one has a nice vintage DeArmond Gold Foil Pickup. Action is medium, but if you would like a lower action, we will be happy to cut that bridge a bit down. Guitar is in  nice vintage condition. All original except the period style Rosewood Bridge and reproduction Harmony Pick Guard. SOLD

Wah-wah: A wah-wah pedal creates vowel-like sounds by altering the frequency spectrum produced by an instrument—i.e., how loud it is at each separate frequency—in what is known as a spectral glide or "sweep".[68] The device is operated by a foot treadle that opens and closes a potentiometer. Wah-wah pedals are often used by funk and rock guitarists.[69]

Using that pickup and gain level, you should be able to hear some guitar distortion. Of course, if that's not entirely satisfactory, there are a few other things you can do. If your amp has tone controls, you can turn up the mid knob to hear the guitar distortion more clearly. If there's only bass and treble controls available to you, you can turn both of these down a little to hear more distortion.
The desire for innovative sounds has intrigued musicians in every culture since the dawn of time. Oscillating the volume of a note is an ancient technique — we’ve been able to do it with our voices as long as we’ve been capable of singing. Any musician playing a stringed instrument can create tremolo effect — they simply move the bow or finger back and forth while sustaining a note, as violinists and cellists do. But what about other sounds? How has the addition of mechanical and digital devices changed our music?

A lot of EBay sellers have been calling the Hagstrom solid-bodies of the time Hagstrom-Kent. They are not. If it says Hagstrom on the body, it’s a Hagstrom. If it is one of the Hagstrom guitars that was sold as a Kent, it’s a ‘Kent, made by Hagstrom’. I wonder if the sellers think they can get more for a guitar by associating the Kent name with it. I don’t see how. Perhaps the fact that there are so many Kents floating around, the sellers wanted a more familiar name to hang on the Hagstrom.

After you've made your selections from the best selection of guitar and bass tabs, you'll want to download the apps for your Android, iPad, iPhone, or other device to gain access to your digital library anywhere. The option to print the file is still available, and you will also have all of your sheet music stored in your personal account to access your digital file from any computer or mobile device. If any issues arise, make sure to contact our customer support of musicians, ready to help fellow musicians.
The person who made up the Top Ten list of best guitars has it all wrong! Of all the guitar companies he lists, Carvin is the only company that still uses ebony as standard material for the fretboard. This is because most other companies refuse to take the time and expense of this type of production. The others all use rosewood because it is cheap, relatively soft and can be "slammed" together quickly by machine; an indication of how they make their guitars in general! No other company who makes guitars even comes close to using the hand selected grade of wood (start to finish) that Carvin does. Take a hint from someone who knows how great guitars made step by step; if you want a guitar made from the best materials you can get, with critical operations still done by hand, order one one from Carvin, try it for ten days, if you really don't like it just return it... No questions and no hassles... Really. If you are not the type of person who cares, or are not willing to do ...more

Acoustic guitars were always subjected to various limitations. Since the body of the guitar is its own source of sound amplification, we had to find other ways to get the sound out there. One of the most popular ways was to put a microphone in front of the instrument. This is a method that is still heavily used today, although it's cumbersome and inconvenient in a lot of applications.

Alembic | Baldwin | BC Rich | Burns | Crucianelli | Danelectro | Egmond | Eko | Epiphone | Fender | Framus | Futurama | Gibson | Goya | Gretsch | Guild | Guyatone | Hagstrom | Harmony | Hofner | Ibanez | Kalamazoo | Kay | Kent | Kramer | Levin | Martin | Magnatone | Microfrets | Mosrite | National | Ovation | PRS | Rickenbacker | Silvertone | Supro | Teisco | Yamaha | Valco | Vox | Wal | Zemaitis
Admit it. You’ve slow danced to Stairway To Heaven before. Page’s playing have influenced so many guitar players of today, and Led Zeppelin revolutionized Rock and Roll blending acoustic guitars, banjos, and mandolins while still staying with the same gritty rock image. His guitar riffs are forever etched into Rock and Roll’s hall of fame. How influential was he? Step into a guitar store, and you’ll see. Thousands of 12 year old kids across the globe are playing the intro to Stairway. Now that’s how you know you’ve made it.
Most delay pedals have controls for the number of repeats (called “feedback”), the volume of the repeats and the time between each repeat. Some pedals have what’s called “tap tempo”, where you can tap your foot on the pedal and the delay unit will match the speed of the effect to your foot, allowing you to match the delay time to the tempo of a song. Delay pedals are often used to thicken up heavy lead guitar sounds, or to subtly add more to a simple rhythm guitar part.
Epiphone Zakk Wylde Les Paul Custom Plus Bullseye Solidbody Electric Guitar at a Glance: Loaded with Zakk's blazing-hot custom EMG active humbuckers Totally solid mahogany body and hard maple neck deliver freakish sustain Premium hardware put this Les Paul in a class all of its own Loaded with Zakk's blazing-hot custom EMG active humbuckers Turn up the heat with a pair of the most outrageously amp ...
Nice and great are just two of the many positive adjectives that people use to describe the Ibanez AEG12II-NT. And most of these satisfied users are pleased with its playability, describing it as a truly inspiring and fun instrument. Its visual appeal and sound quality are also commended often, some even coming from experienced players who compare it to more expensive acoustic-electric guitars.
Seagull acoustic guitars are among the best values you are going find. They’re made in Canada, and there’s an attention to detail and craftsmanship here you may not expect in guitars at these price points. The Seagull Artist series is the top of the lineup. You’ll find unique tonewoods and high-quality construction techniques at an affordable price.
This is a gradual and repetitive change in volume, going up and down. Done slowly and subtly it can be very gentle, but turn up the controls and you get a surf-guitar like shimmer. On extreme settings the signal turns from fully on to fully off sharply and repetitively, giving a robotic sound. Controls are usually rate and depth, with a third control to affect how sharply the volume changes occur – whether they are smooth and gradual or sharp and sudden. Tremolo pedals are often equipped with tap tempo too, allowing you to match the volume changes with the tempo of the song.

Now, let’s consider the tone knobs. Eric Clapton was one of the first guitarists to realize the power within those unassuming plastic spinners. His famed “woman tone” sound during Cream relied on rolling the pots on his Gibson Les Paul Standard, SG or ES-335 all the way off and turning the treble and midrange of his superbly overdriven Marshall amps high. Similarly, jazz guitar players who are looking for a classic tone roll their pots back until they get in the Wes-Benson-Burrell-Pass-etc. zone.
The two most prominent electric guitar brands overall are Fender and Gibson. Although you won't find guitars with those labels on the headstock in this price range, both of them have sub-brands under which they sell their entry level models: - Fender owns the Squier brand and Gibson owns the Epiphone brand. Other well-known brands that have guitars in this price range include Dean, ESP, Ibanez, Jackson, Kramer and Yamaha and Washburn.
Ovation guitars are produced in the U.S. as well as in Korea and China. Those models in general have a wooden top. Recently Ovation significantly reduced the production of U.S. made Ovation models. From 2010 on better models (e.g., Legend, Elite, Custom Legend, Custom Elite) used to be available, both, made in the U.S. and made in Korea. Before that, the mentioned models were U.S. made. In recent years many U.S. made guitars could be identified by the LX in the product name (e.g., Legend 2077LX), whereas the Korean-made version of the same guitar had AX in its model name (e.g., Legend 2077AX). Again, this name-system has not been used throughout the whole guitar model range (e.g., Ovation 1617ALE). Nowadays only a few U.S. made models are being produced, mostly signature and limited edition models (e.g., Custom Legend 1769-ADII Al DiMeola). Production of the standard model range of Ovation guitars in the U.S. has been seized.[24]

The question here is how high to make the bridge. Well, this is personal choice. Find somewhere were the string doesn’t buzz on any fret from being too low, but low enough that you can play up and down the neck easily. There’s usually a sweet spot where you can just start to detect some buzzing and you can leave it just a tiny bit higher than that. Now do the exact same procedure for the high (thin) E string end of the bridge. Play the guitar a little bit to see if any of the other strings are buzzing. If, say, the A string is still buzzing, then raise up the end of the bridge nearest to that string a little bit ( a small amount of buzzing is often OK as long as it doesn't bother you too much and isn't heard through the amplifier - this a bit of a personal choice thing). OK, that’s step 2 finished. Your guitar should be nice and playable now. However, it may not seem to stay in tune very well. That’s because the intonation might be off.  
Accompanying the Supro frying pan in the ’36 Peate catalog was the Supro amplifier. This had a small, rectangular cabinet with a round grillplate with the screws attaching the speaker showing around the edges. The grille cover was still similar to a resonator cover, with large diamond cutouts, backed with cloth, and finished with black wrinkle paint. A leather handle sat on top, and metal bumper guards graced the lower corners. No information is available regarding specs.
Of this list I think it's such a shame to see some names there and others missed but it's only a list to grab attention, not a definitive, set in stone, tablet for future generations to adhere by. But seriously where is Brian May? The man that made me want to play in the beginning. Every time I hear him hit those strings it sounds like the first time. And no Danny Gatton either. But hey that opinions for you.
In late 2013, it was announced that Absara Audio of Port Jefferson Station, New York, had purchased the rights to the Supro trademark from noted electronic engineer Bruce Zinky.[7] Zinky himself had used the Supro name for a series of amps beginning in 2005 from his company, Zinky Electronics. Absara announced in January 2014 that a series of new Supro amps would debut at the Winter 2014 NAMM Show in Anaheim, California.[8] The new Supro amps are cosmetically reminiscent of their progenitors from the 1960s.
This depends on personal preference; changing the order of drive pedals changes how they sound when used together. For instance, a clean boost placed before a heavy distortion or fuzz will result in a louder boosted signal hitting the heavier distortion circuit which in turn works that circuit harder and you get heavier distortion. If you place that clean boost after the heavy distortion, it will just make the original distorted sound louder. Experiment with different placement order and you will find your own preference.
Before diving in, it’s also worth mentioning the “crap in, crap out” rule, which dictates that any recorded track is only going to sound as good as the guitar and amp that it captures, however good your mic or skilled your engineering. You can’t expect elevated studio technique to convert junk tone or a mediocre performance to stellar sounds in the mix; the best you can hope for is to accurately capture the sound being made by your amp, and to do so with optimum depth, dynamics, and fidelity. Of course, it’s possible that the crappy, low-grade junk tone you capture from a scuzzball rig is exactly what the recording demanded (Jack White or Dan Auerbach, anyone?), but it will usually benefit the tune to capture it as powerfully as you can!
Description: Body: Alder - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 3+3 - Bridge: Fulcrum Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Duncan Designed - Pickup Configuration: S-S-S - String Instrument Finish: Transparent Colors
For example, Pat Metheny took his Gibson ES-175 and ran it through some lush chorus, delays, and compression to create his signature jazz sound. On the flipside, John McLaughlin plugged his guitar into a Marshall stack for the wild rock tones heard on records with Tony Williams Lifetime and Miles Davis. In fact, Joe Perry of Aerosmith plays a Gretsch Falcon. The hardest thing to do when playing a hollow body guitar through a loud amp, or a hollow body with a dollop of distortion, is not to get bowled over with feedback. Either way, these guitars are celebrated for their big, full sounds, and can be applied to many musical situations.
I think Matts’ advice is good, (old guitar strings can be helpfull for “fishing”) but if you change your p’ups and switching often an accessible control cavity is a great thing, just be sure to drop all pots and such into the body and drill through the potentiometer holes so you know where to place template and assure router bit won’t hit anything dangling in the body.
The pickups on an electric guitar can only pick up the vibrations of the string and convert those vibrations into electricity, which is ultimately converted into sound waves that emanate from the speakers. Do the pickups shape the sound? Of course! Can pickups mask the characteristics and make two electric guitars with different tonewoods sound the same? Yes again. So, I guess the correct answer to the question if wood makes a difference in the sound of an electric guitar is “It depends”. A pickup that can’t pick up these subtle overtone differences, enough compression, or other kinds of dynamics-killing processing, will kill the dynamics of any guitar, regardless of tonewood. Does that make it a bad guitar? Not necessarily – it depends on what the musician is after.
If you’re a very dynamic player who likes to play soft and loud, a compressor is a must have: by raising the soft parts and lowering / adjusting the loud parts, you will get an even sound that works for most applications and won’t make ears bleed: the simplest way to describe it is as an “automated” volume control. The EQ, on the other hand, is crucial if you have a problematic guitar, an amplifier with limited tone-shaping control or, simply, need a creative way to alter the way your guitar sounds. EQ can be placed in front of the amp for shaping the sound going inside the amp or in the send/return (after the amplifier section) as a volume boost/eq boost.

Gold models had single coil pickups with clear silver plastic covers and phillips head bolt adjustable pole pieces. The Upbeat model came with an optional transparent black plastic cover. These pickups appeared on Kay instruments through the late 1960s and are sometimes called “Kessel” or “Kleenex Box” pickups.[citation needed] The Jazz Special Bass has a single blade pickup as used on the K-161 and K-162 (tilted slightly towards the neck at the treble side), as well as a distinctive, oversized headstock.
I like it especially as a studio companion for lead guitar players who have session clients that need melodies to come out perfectly on recorded tracks. Having a neck that's so thin makes it easier to play and get right the first time which will reduce the number of takes. Though the live performer will benefit as well, considering that improve playability has universal benefits.
Lastly try a fuzz pedal like a Fuzz Face or Big Muff. Fuzz pedals offer huge amounts of drive and low end but are generally used for single notes and power chords. Regular chords can sound pretty nasty with fuzz and it’s probably a bit wild for acoustic guitars. Although if it works with your style and draws the congregation into worship, then why not? The important thing is to be tasteful and selective in how, when and how much you use effects. Follow the golden rule; a little ‘salt’ can bring out flavour but too much kills the dish altogether.
Loop-based guitar plugins are slowly moving to the point of obscurity as virtual instrument technology is getting to the point where even string instruments can sound out-of-this-world good and blossom with character. But there still exists some gems out there such as Acoustic Revolutions, which updated to volume two as recently as 2015, doubling the number of loops.
In 1966 Vox introduced the revolutionary but problematic GuitarOrgan, a Phantom VI guitar with internal organ electronics. The instrument's trigger mechanism required a specially-wired plectrum that completed circuit connections to each fret, resulting in a very wide and unwieldy neck. John Lennon was given one in a bid to secure an endorsement, though this never panned out. According to Up-Tight: the Velvet Underground Story, Brian Jones of the Rolling Stones also tried one; when asked by the Velvets if it "worked", his answer was negative. The instrument never became popular, but it was a precursor to the modern guitar synthesizer.
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.
A more affordable but still high-quality pair from Audio-Technica would be the M20x, which still shares some features with the premium products offered by this manufacturer. The drivers — in this case at 40 mm in size — feature the same rare earth magnets, and the voice coils are made of copper clad aluminum wire to provide for the clearest possible tones.
The matching Baton amplifier had the same cabinet shape as the Supreme, but was smaller, with a brown simulated alligator covering, and a square grill with rounded corners. It had three tubes, four watts of power, and a 61/2″ speaker. Similarly, it’s possible that the Baton amp may have debuted by 1940. In April, 1942, the Baton Guitar Outfit cost $57.50.

All product names, logos, and brands are property of their respective owners, and are in no way associated or affiliated with The Top Guitars.  Product names, logos, and brands are used solely for the purpose of identifying industry-standard products and brands used by The Top Guitars for the business of post production sound, and any related awards or honors therein. Use of these names, logos, and brands does not imply any co-operation or endorsement.
This guitar has an interesting makeup of tone wood. First, the body is Mahogany just like the Iron Label model. The top of the guitar is Poplar Burl, where a burl is actually a type of growth on a tree in which the grain has become somewhat deformed. It sounds bizarre but, Burl is highly prized for its rarity and beauty and is often sought after by wood sculptors and luthiers alike.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: guitar value packages","pageName":"[mf] shop: guitars: guitar value packages","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: guitar value packages","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"guitar value packages","prop5":"[mf] shop: guitars: guitar value packages","prop6":"[mf] shop: guitars: guitar value packages","prop3":"[mf] shop: guitars: guitar value packages","prop4":"[mf] shop: guitars: guitar value packages","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}
CALIFORNIA CLASSIC models feature superb playability, distinctive looks and an unmistakable Fender vibe. The fully-painted solid Sitka spruce top and natural solid mahogany back and sides, as well as a matching painted 6-in-line headstock and koa binding and rosette, give them an elegant two-toned aesthetic that was made for the stage. California Special and California Classic acoustic guitars are equipped with a Fender- and Fishman-designed PM preamp specifically tuned to complement the unique shape and voice of each instrument—complete with tuner, frequency and phase controls.
• Do the Right String: Some instructional guides advise beginning players to try ball-end nylon strings because they are easier on the fingers and are more bendable than metal, but steel string guitars are called “steel string guitars” because that’s what they require. Nylon strings lack the tension needed to keep steel strings guitars at their peak, which means warping, bridge damage and other issues can occur. Likewise, steel strings on a nylon string classical guitar will warp its neck with frightening speed.
I think I understand the value of not being tied to those things so your own technique can flourish -- not relying on anything, really. I think that it's cool to keep an eye on your purism sometimes. I'm glad I can pick up an acoustic guitar, and if it's not sounding too good, I just put it into a tuning until it does. I also have an appreciation for the almost novelty factor of being able to hit a couple of switches and go from one amp sound to another.
Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, Diecast, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Amber, Red
The truth is that I've never known what it's like to not want to play music of my own because I come from an Irish family that all played instruments. Luckily for me, my parents were very young when I was born -- they were like sixteen, seventeen -- and they were from a tradition of people playing instruments, accordions, pennywhistles, guitars, harmonicas and things like that -- cheap little instruments. But because they were young and moved over to Manchester, they liked rock and roll and pop music of the day.
In terms of tone, a smaller dreadnought body will be slightly lacking in projecting the low-end frequencies. That doesn't matter here thanks to being an acoustic electric. With that said, the trebles and mids give away its origin, tone-wise. Play a few chords and you'll immediately hear that classic 'Taylor sound' even from a lower mid-range guitar like this one.
The brand continued to release new models through the sixties, seventies and eighties (namely, the RGX Series). Then, in 1990, Yamaha launched the incredibly successful Pacifica range, which combined versatility, reliability and great tone in an affordable package. It was pounced on by beginners who didn’t feel the need to splash out on a Fender. Needless to say, the Pacifica Series is still going strong in 2018.
Here’s the thing about acoustic guitars: those that use solid wood command a higher price than those that use laminates for their soundboard. Acoustic guitars that have a solid top are more sturdy and sound better as the wood matures. This is why solid wood models are usually more expensive, and also why they come highly recommended if you want to make a really good investment.
We make our Tone Bars / Ferrule Blocks (tone slugs) out of 360 brass and use them on most all of our string through custom guitars. You will notice an enhancement in sustain and beauty.  The ones sold here are not polished. Go to to purchase slugs that are polished. Please ask any questions you might have about the Slug. I offer quantity discounts.
Jump up ^ This sequence of fifths features the diminished fifth (b,f), which replaces the perfect fifth (b,f♯) containing the chromatic note f♯, which is not a member of the C-major key. The note f (of the C-major scale) is replaced by the note f♯ in the Lydian chromatic scale (Russell, "The fundamental harmonic structure of the Lydian scale", Example 1:7, "The C Lydian scale", p. 5).
Fujigen Gakki is a musical instrument maker located in Matsumoto, Japan. They began making violins and classical guitars in 1960 and electric guitars in 1962. Their real heyday of guitar production began in the 1970’s when they began producing guitars for major American manufacturers like Fender and Gibson as well as some Japanese manufacturers. In fact, after CBS acquired Fender Electronic Instruments Company they decided to move to larger manufacturing facilities. Between the closing of the old factory and the opening of the new one, the only Fender guitars being made came from the Fujigen Gakki factory. Other factories have been used to manufacture Fender guitars, some for the Japanese market only. Regardless, Fenders made in Japan are considered top-quality.
Back in the 1930s jazz and big-band guitarists began to make the switch to electric guitars in order to compete with the volume of other instruments onstage. Early electric instruments were hollow-body guitars. They were big, and featured an arched top that helped with power and projection. They had f-holes to facilitate amplification acoustically, and the first rudimentary pickups that allowed the guitar to be plugged into an external amplification system.
Sound quality-wise, it’s too close to call. All modern Zoom, Line 6, Boss, and DigiTech multi-effects units sound excellent. Distortion sounds a bit better on the DigiTech, and if reverb is your thing it doesn’t get much better than the Lexicon verbs. The other multi-effects units might be better if you’re looking for more experimental sounds and textures. The DigiTech RP500 tends to be more conservative, and focuses on nailing the classics.
A right handed 6 strings, electric guitar that mostly comes in black. The body is made from mahogany, while the fret board is made up of rosewood. The fret board is composed of up to 22 frets of 2.7 mm in size. It additionally has beautiful electric features such as a 3 way toggle and a push and pulls volume and tone. Price ranges from INR 21,400-21,541. Click below to get more product details.
As a trained engineer I just don’t see how contemporary luthiers would be able to control only these three parameters in combination in order to make up a specific tone. There is simply no connection between these and the sonic impact they have–again, in combination. Did anyone ever change the shape due to the wood he uses? For instance wood would be lighter by 5%, stiffer by 8% (which would be very much, by the way, but it happens all the time even with the same species) so consequentially make the horn less thick by 3% and trim the tail by 5 mm. A rule like that would be plausible in case wood would affect the tone that much. But luthiers never do. Thy do not even take care of weight and stiffness.
The term overdrive refers to when a tube amp is driven past its range to supply a clean tone. This is something we as guitar players have come to love and seek out. A common question is “what is the difference between overdrive, distortion, and fuzz as the terms have become interchangeable?” The short answer is not a lot, just one is more extreme as we go down the line.
There is no way to indicate strumming patterns or the duration of notes. Take our examples above. If you know these two songs, you can quickly figure out how to play these passages. But imagine that you don't know them. How long do you hold the C chord at the beginning of Silent Night? How long do you play the notes for Day Tripper? The only indication in Silent Night is the inclusion of lyrics. For Day Tripper, the distance between the numbers gives you minimal information about note duration, but you could never reproduce the riff if you didn't hear someone else play it.
A compressor acts as an automatic volume control, progressively decreasing the output level as the incoming signal gets louder, and vice versa. It preserves the note's attack rather than silencing it as with an Envelope Volume pedal. This adjustment of the volume for the attack and tail of a note evens out the overall volume of an instrument. Compressors can also change the behaviour of other effects, especially distortion. when applied toward the guitar, it can provide a uniformed sustained note; when applied to instruments with a normally short attack, such as drums or harpsichord, compression can drastically change the resulting sound. Another kind of compressor is the optical compressor which uses a light source (LED or lamp) to compress the signal.
Considering that all of the other small-sized guitars we tested were much flashier, I was shocked when our teenage testers, Alana and Charles, both picked the Epiphone Les Paul Express as their favorite short-scale model. It turns out our younger panelists didn’t care at all about the style of the guitars, they cared about comfort—and for them, the Les Paul Express was as comfortable as an old sweatshirt.
Our pick here is the PAC112V version, for a few reasons. First off, the solid alder body offers you the same tonewood you’ll find in a lot of higher end S-style guitars. The maple neck and diecast tuners will feel really premium in your hands, too. But the 112 series further boosts its value with two Alnico V single coil pickups and an Alnico V humbucker. The addition of the humbucker in the bridge position will open up a whole other world of tones for a budding musician, giving the option for both clean, crisp single coil sounds and thick, high-output humbucker growls.
{ "thumbImageID": "APX600-Acoustic-Electric-Guitar-Vintage-White/L03937000005000", "defaultDisplayName": "Yamaha APX600 Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage White", "sku": "sku:site51500000208044", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Vintage-White-1500000208044.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Vintage-White/L03937000005000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000208043", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Natural-1500000208043.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Natural/L03937000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Old Violin Sunburst", "sku": "sku:site51500000208047", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Old-Violin-Sunburst-1500000208047.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Old-Violin-Sunburst/L03937000003000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000208045", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Black-1500000208045.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Black/L03937000004000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Oriental Blue Burst", "sku": "sku:site51500000208046", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Oriental-Blue-Burst-1500000208046.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Oriental-Blue-Burst/L03937000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
In the ideal scenario, once set, your saddles should neither be flush down on the bridge assembly of the guitar, nor extended so high they could go no further. This saddle height relative to the bridge assembly is a reflection of the neck angle. If the saddles sit flush, the neck angle is not set back very far and vice-versa. This is where you should decide if your neck angle is in need of adjustment ( if you have a bolt-on neck). Check the measurement at the 12th fret then progress up the neck, measuring every couple of frets. The string height should continue to gradually rise, if it doesn't the neck is set back too far and has to be tilted up just a little. This is a very sensitive adjustment and the thickness of a couple sheets of paper can make a big difference. Some Fenders have a neck tilt adjustment screw that is accessed with an Allen wrench through a hole in the neck screw plate. The strings must be loosened, then the neck screws, then the tilt adjustment screw is tightened or loosened. Never do this when the neck screws are tight! If you don't have a tilt adjustment, thin shims of wood veneer are fitted in the neck pocket to adjust neck angle. Uneven frets are also a possibility. If , after having followed all the above steps, you are still getting fret buzz, you must establish that the frets are all even. But this leads us to fret dressing, which is another story altogether.

Bowers loves combining incredible chops with strong melodies, and his influences read like a “Who’s Who” of guitar heroes. Included are such high-tech players as Steve Morse, John Petrucci, and Steve Howe. While talking with Frank, I learned that he has had two of his Les Pauls customized to accommodate a push-pull tap switch on their tone knobs. In the normal position he has full control of his Seymour Duncan humbuckers; in the pulled-up position he goes to a single coil “spin-a-split” configuration that allows him to get more of a “Tele” tone at zero—or he can dial in a bit more of the other half of the pickup to emulate more of a P-90 sound. The thinner “Tele-ish” tone cuts better, allowing more clarity on his leads and rhythm patches.

This should give you an idea of when the majority of the production for any one model occured (majority meaning more than 5 instruments per year). Note this does not mean a model can not exist outside of these years - it certainly can. Just these are the years recorded by Martin in their ledgers. Note this list (for the most part) does not go past 1969.
Designed to be the greatest all-rounder, the Grand Auditorium shape was the perfect blend of size, shape, volume and comfort, and its modern-day incarnation has seen the likes of the biggest pop star on the planet these days, Taylor Swift pick one up. People forget that before mega-stardom, Taylor was a respected country artist, and it was on a Taylor Grand Auditorium that she plied her trade.
alright i think we all need to stop hating on john mayer. I don't think that he really would even call himself one of the best guitarists of all time, he's obviously not far enough into his career to be criticized about this stuff. But i love him, and he eventually will make it on this list. Oh, and for all you who say he sucks and whatever, if he is so bad then why has he played with so many of the people who actually should deserve to be on this list?
Taylor’s proprietary pickup system, the Expression System, consists of ahumbucking induction pickup mounted in the neck and a pair of dynamic soundboard transducers wired to an on board preamplifier designed by Rupert Neve.[10] The entry-level 100 and 200 series use an externally similar system known as ES-T, which utilizes a single under-saddle pickup and no soundboard transducers. The first generation system was powered by a pair of AA batteries. Starting in 2007 the electronics use a 9-volt battery similarly to common piezoelectric and microphonic pickup systems in other guitars.
Amp modeling is a polarizing topic for some guitarists, but it shouldn't be because the alternative is still widely available. If f you feel that amp modeling will just be a distraction then go for a straightforward amplifier. For those who do appreciate the versatility that they offer, there are now many options on the market, from the usual digital recreations of popular amps, to those with analog based amp voicing approximations.
I commented earlier that the guitar amp is the instrument as far as the mic is concerned, but if the guitar is played in the control room with the amp itself in the studio (assuming decent separation between the rooms), a capacitor microphone close to the guitar neck may be used to capture the direct sound from the guitar strings. This sounds a bit thin and naff on its own, but sometimes works well in combination with the miked sound. A similar effect can be achieved by splitting the guitar output, feeding some of it direct to the console via a DI box and then either removing some low end or using an enhancer to exaggerate the brightness. DI'ing the piezo bridge pickups (where fitted) may also produce a similar result, and any of these techniques may also be used with guitar recording preamps as well as when miking.

A switch is a device that segments networks into different subnets. Segmenting the network into different subnets keeps one network from overloading with traffic. Therefore, a switch forwards all data in the data layer and sometimes the network layer as it filters the data. A switch allows a connection to be established and it terminates a connection when there is no longer a session to support. Prior to switches there were hubs. Hubs also connected multiple independent (connected) modules in a network, but they were not as efficient as switches. Since most switches work in Layer 2, and not in Layer 1 like a hub, they are better at filtering data. A switch looks for Ethernet MAC addresses, keeps a table (the bridge forwarding table) of these addresses, and navigates the switch between ports. The switch prevents collisions and gives full bandwidth to each connection at the switch port. Switches save bandwidth by only sending traffic to destinations that have traffic. When a switch switches Ethernet frames, they monitor the traffic for the response from that frame and see what device, on what port, responds to that flooded frame. There are different types of switches that range from "dumb" switches that lack manageability and can monitor only 4-8 ports to "managed" switches that can get statistics on switch traffic, monitor connections, and hard-code up to 96 port speeds and duplex. Then again, there are "chassis-based" switches with blades or cards that perform not just switching, but routing and intrusion detection too! If you are interested in this, look into Cisco's Catalyst 6500 Series. Another type of switch preferred by large enterprises is the "Layer 3 Switch," because it has the functionality of a router .

Certainly, the response to these innovative guitars at the time gave no indication. They tanked pretty quickly. No one has ever even seen a real Moderne, and players didn’t warm up to the Explorer and V until the 1970s. These models even inspired at least two new American brands – Hamer and Dean – both dedicated to making “improvements” on the Gibson originals. Japanese manufacturers also picked up on the appeal of these designs.
Why the Ultra Hard Bodies flopped is a mystery, since they certainly fit with the superstrat rage of the times, but they hung around for only a year or so. According to Walter Carter, Ovation briefly contracted for a shipment of solidbodies made by a Japanese manufacturer. No information is available about these, but it doesn’t really matter since only one carton of 100 or so guitars ever came in. If you find an animal that doesn’t fit the descriptions here, take a picture and let us know about it.
I still keep in touch with Mark and occasionally pose questions to him about various maintenance concerns. He's pretty busy and it may take a few days before he get's back to me. He has always been willing to help and actually encourages me to take on a lot more of the responsibility of maintaining my basses. Yeah, I spent a little on the front end but I really feel that it's going to payoff for me long term.
When you are in Drop D tuning, the note open string is a D. This means that at fifth fret you would play a G. To get the A note (the root of the power chord) you would move up to the seventh fret. How convenient that the fifth is right next to it, on the seventh fret of the next string! Power chords now look like the following chart. Note the difference between these chords and those in the previous chart.
The guitar is very light in weight and pretty resonant. At this point they were hard-wiring the cord right into the guitar with a nifty spring strain relief on the plug. This guitar has a brighter sound than my Gretsch and I probably prefer it for ultra-clean work because it has that vintage "thang" going on that some call "mojo." I am, however, trying to get the driven sound sorted at this point because of all the overtones. Now I know what sort of sound the Telecaster bridge pickup was based upon!
The electric guitar was at the heart of popular music for the new generation. Fender released the Telecaster – the first mass produced solid body electric which made it possible for the average Joe to buy a guitar and start a band to express themselves.  With amplifiers and solid body electrics the volume could be cranked and every bit of emotion displayed through the music.
The effects alter the instrument sound by clipping the signal (pushing it past its maximum, which shears off the edges of the signal waves), adding sustain and harmonic and inharmonic overtones and leading to a compressed sound that is often described as "warm" and "dirty", depending on the type and intensity of distortion used. The terms distortion and overdrive are often used interchangeably; where a distinction is made, "distortion" is used to denote a more extreme version of the effect than "overdrive". "Fuzz" is a term used to describe a particular form of extreme distortion originally created by guitarists using faulty equipment (such as a misaligned valve tube, see below), which has been emulated since the 1960s by a number of "fuzzbox" effects pedals.
Rackmounts are most commonly used in recording studios and "front of house" live sound mixing situations, though professional musicians who play electric bass, electric guitar, or synthesizers may use them in place of stompboxes, to create a rackmounted head unit for their speaker cabinet(s). Rackmounts are controlled by knobs, switches or buttons on their front panel, and often by a MIDI digital control interface. During live performances, a musician can operate rackmounted effects using a "foot controller".[14] By setting up effects in a rack-mounted road case, this speeds up set-up and tear-down, because all of the effects can be connected together with patch cords (which can be left connected permanently) and all of the units can be plugged into a power bar. This means that a musician only needs to plug in the main power bar into AC Mains power and plug their instrument into the rack, and the last effect unit's output into their instrument amplifier and/or the PA system.
Pedals. I have a basic rule when it comes to overdrives, distortions, and fuzzes: When I engage them, I want the volume to either stay the same or increase a bit, so I’m “pushing” the amp with the pedal. Because drives compress the sound, they can tend to seem louder overall when you turn them on, but actually they might be reducing the overall peak level. I don’t want to diminish the natural output level coming out of my guitar, and I don’t want my guitar tone to vanish in the mix when I hit a pedal. As I mentioned earlier, I often run the tone control quite low on drive pedals, which I feel keeps them sounding warm and natural.
CALIFORNIA CLASSIC models feature superb playability, distinctive looks and an unmistakable Fender vibe. The fully-painted solid Sitka spruce top and natural solid mahogany back and sides, as well as a matching painted 6-in-line headstock and koa binding and rosette, give them an elegant two-toned aesthetic that was made for the stage. California Special and California Classic acoustic guitars are equipped with a Fender- and Fishman-designed PM preamp specifically tuned to complement the unique shape and voice of each instrument—complete with tuner, frequency and phase controls.
Fender’s MIM (Made in Mexico) Stratocasters are offered as an affordable option, buyable at about half the rates of their American siblings. Moreover, you can also select your preferred one from among the maple and rosewood fingerboards, SSS or HSS pickup configuration, and color variations. You can also find several models available with Floyd Rose tremolo and pretty tops. For those requiring American Fenders, the American Original Series is available with all essential features.
Rack-mounted effects processors are another option, and are often used in pro and home studios as well as in stage rigs.. These effects units offer the same options as floor-based pedals and multi-effects units. They are simply mounted in a rack, and usually can be controlled with a foot pedal or the controls on their front panels. Newly developed iOS app-based and DAW-based effects add even more options to how you go about building an effects collection.
“This is a very complicated mix of economy versus market, demand versus what products are they putting out, versus are their products as good as they used to be, versus what’s going on with the Internet, versus how are the big-box stores dealing with what’s going on,” Smith says. “But I’ll tell you this: You put a magic guitar in a case and ship it to a dealer, it will sell.”
Aside from the stereo effect of doubling up the same part and panning it to opposite ends of the stereo spectrum, some guitarists use stereo rigs in conjunction with stereo effects. Traditionally, this involves using two amp cabinets, although single cabs that operate in stereo are available. To achieve a good, even stereo image, it’s best to mic each cab identically, ideally with the same type of mic. Invert the polarity of one of the channels to avoid any out-of-phase issues, and pan them hard left and right. Stereo effects such as reverb, delay and room ambience, can be added to mono guitar signals at the mixing stage.
After the dissolve of Kay/Valco in 1968, the Engelhardt-Link company bought the upright bass and cello lines[clarification needed] at the asset auction in 1969, and continue to produce the same instrument lines till today. Manufactured in Elk Grove Village, Illinois, Engelhardt basses and cellos are sturdy instruments, widely used by students and touring professionals. The ES9 Swingmaster bass (formerly the Kay S9 Swingmaster), is highly thought-of by jazz, swing, and bluegrass musicians.
Wes Borland (b. 1975) guitarist for Limp Bizkit has owned many Ibanez guitars, including a custom 4-string baritone guitar, although he no longer endorses them. He was mainly noted for playing an Ibanez RG7 CST which had selectable piezo and magnetic pickups, only 18 of these were made in 1999. Borland has a signature Yamaha guitar, but has been seen playing a Jackson with the reformed Limp Bizkit.

Great guitar this is my 2nd one fist one i purchesd in 2010. Had to pown it I was realy upset about it but nothing i could do. I was so happy to find another one here on Amzon!!! Only thing it did not come with A pick card as addvertized. Thats why iam giveing it 4 in stead of 5 stars. Case that comes with it is realy cheep you would think the money invested the would at least give you a padded soft case.I have orderd a hard shell Gator case for it it will be here in 2 days. This is why it gets 3 stars. Iam a pro. Guritist and song writer,singer. Guitar it self gets 5 stars

In 1969 MCA closed the Danelectro plant. This was blamed on MCA's shift to selling instruments to individual guitar stores instead of jobbers (such as Sears). At this time, Dan Armstrong bought most of the remaining parts, and continued manufacturing Danelectros through Ampeg. These instruments had single cutaway bodies with one humbucking pickup (not lipstick tube pickups), and no brand name on the peghead. Apparently Ampeg was having problems with the production of the see-thru Dan Armstrong guitars. In the interium, Armstrong sold the remaining Danelectros through Ampeg until the Dan Armstrong guitars were fully available.

Note: All versions and platforms of Rocksmith are compatible with the Real Tone Cable. It is a required 1/4-inch audio jack cable necessary for Rocksmith to detect and respond to your guitar playing. All versions of Rocksmith include the Real Tone Cable in the box, except downloaded versions and the Rocksmith 2014 Edition "No Cable Included" Version.
Alvarez has always been an under-rated brand. Beautiful workmanship, great sound- an excellent value for the money. I have one of the old six string "dove" guitars and a Yairi 12 string: both are close to forty years old and both still sound and look great and have never needed any repairs. I also have an old Martin six string. I have done the "blindfold" test with friends to choose the best sound between the alvarez and the martin - alvarez wins every time.
In addition, there were other assessments. I went to Guitar Center to buy an amp. I was playing my guitar through a vintage tube amp when I noticed a man standing behind me. I said, “It sounds good.” He said “It sounds really good, are you going to buy it” as he pointed at my guitar. It was then I realized he was a customer and was interested in buying my guitar.
Gitar Tricks are listening (see quote in bold) and as a result I have upgraded my Review Rating of this awesome Online Guitar Training Program. My previous review highlighted problems with the Video Loop Feature and the lack of Speed Control I am so happy that Guitar Tricks have released an immensely improved Video Player with faster video loading time, more accurate and reliable A/B looping and added a Video Timeline Preview that displays thumbnail images of the video at various points as you hover over the timeline. Another feature of the new player is the ability to adjust the speed via the Slow Motion feature.

Gruhn Guitars: If you're looking for a convenient appraisal that can be done online--something along the lines of what May Music Studio used to do--Gruhn Guitars offers an appraisal service. You must first send information and pictures of your guitar according to their guidelines. You must also include a payment for the appraisal fee, which varies depending on the instrument.
The question is now - do you need the entire bundle? When it comes to the presets, the guitars are all very unique, but because of the mass amount of tone-shaping available once you start twisting and manipulating away there becomes less and less of a distinction — the bundle being over a third less than individually purchasing them doesn’t help the decision making factor at all.   
The reason for their order boils down to the evolution of the stringed instrument.  By adding a string or two, shortening the neck, and arranging them in a Perfect 4th Interval you can increase the speed of playing and reduce strain on the hands and wrists.  Other interval layouts were toyed with but had some harmonic problems that couldn't be ignored.
Much like the FG series model we have talked about above, this guitar is made solid and has passed Yamaha's unforgiving quality control. You know precisely what you're getting and how it'll perform because each guitar in this line-up is exactly the same as the next, with no discernible variation. They went with a nice solid Sitka spruce top in combination with a rosewood back and sides. This should tell you right away that the guitar is going to be very responsive aurally.
One day I want to own a Martin IN ADDITION to my Gibson.. but having tried both a lot.. the D-18, the D-28... I went with the J-45. The J-45 is special in that it has slim shoulders - you won't get an enormous boom out of it when un-amplified. But the sustain is super fine, and as accompaniment to the singer and as a tool for the songwriter, it is rock solid and it gives, gives, gives, then gives some more. Plus, it's sexy as hell - every boy might think he longs for a Martin, but every girl goes home with the guy with the Gibson.

While Fender specialize in the single-coil pickup, it’s Gibson who are masters of the pickup in general – and it shows when you browse the chart in our dedicated Gibson pickup article. However, you’ll quickly discover that there is no ‘one Gibson pickup’, as the brand offer a wide range including single-coils and humbuckers, medium and high outputs, and vintage and modern tones. You’ll find different pickups on all of Gibson’s famous models, including the Les Paul, Firebird, SG and Flying V. Perhaps they are best-known for their PAF-style humbuckers – an awesome vintage tone that is well-replicated in their famous Gibson ‘57 Classic Plus.
I found myself un-obligated, bored and holding a fist full of cash one Friday afternoon, so I wandered into my local guitar shop. With a new found love of single coil pickups I had been eyeballing the Gretsch and Guild hollow bodies unfortunately too poor to actually buy one. On this afternoon, however, I played the Godin 5th Avenue Kingpin. It was love at first strum. Mine is called Cognac Burst. The satin finish on these instruments is beautiful, and give it a vintage, played look. This guitar has a really nice feel in terms of the neck and the thickness of the body. I have fairly long fingers and the neck is comfortable to play. It feels to me, a bit like the thicker necks on the Les Pauls of the late 50s. When I got the guitar, the shop said they'd dial it in for me for free, but frankly, I have no complaints as it is. With the classic style floating bridge you can drop the action impossibly low before you start to get fret buzz. After I brought mine home, I did just that and it plays like a dream. The frets are finished well and there is a bevel on the edge of the fret board and frets that keep them out of the way if you're in the habit of sliding your hand up and down the neck quickly. The Kingpin has a warm mellow tone when unplugged that is perfect for playing jazz and blues. I also enjoy the lower volume of the guitar since it has f holes when I play later in the evening. Plugged in, the P90 kills and sounds good clean and driven. It also retains that warm, mellow tone when played without distortion. I haven't had any trouble with feedback as I tend to keep the volume a bit lower for small spaces. My one complaint is the hideously ugly case, that costs 80 bucks. It's like its made of extra tough styrofoam. I understand they were going for lightness, but it's just ugly. All in all though, this guitar is a great choice and plays as well as my Gibson Les Paul and my buddies Gretsch 51... whatever.
Harmony Hollywood H38- OK, here's the one we will sell. She's about the same as above but with opposite color combo. This one has a nice vintage DeArmond Gold Foil Pickup. Action is medium, but if you would like a lower action, we will be happy to cut that bridge a bit down. Guitar is in  nice vintage condition. All original except the period style Rosewood Bridge and reproduction Harmony Pick Guard. SOLD
A phaser pedal is similar to a chorus as it thickens up your sound but also adds a sweeping effect – almost as if the speaker within the amplifier is spinning around or moving up and down. If you pretend the speaker is moving away from you and moving closer and back again – you’ll get an idea as to how it sounds. You can change the length of the effect and how quickly the movements are via the pedal.
The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.

Many bass players believe that tube amplifiers produce a "warmer" or more "natural" sound than solid state amplifiers when lightly or moderately driven, and more pleasing distortion characteristics when overdriven. Some performers also believe that tube amps have a greater level of perceived loudness for a given amount of amplifier power. Even though tube amplifiers produce more heat than solid state amplifiers, few manufacturers of tube amplifiers include cooling fans in the amplifiers' chassis. Usually adequate cooling is provided by passive convection. Adequate airflow is needed to prevent excessive heat from shortening the tubes' lifespan or producing tonal inconsistencies.[13] Tube amplifiers require more maintenance than solid state transistor amplifiers, such as replacing vacuum tubes or rectifying the tubes.

Every electric guitar has a series of electronics that give the guitar its unique sound. Fender guitars signature sound comes from their five-way switches and single coil pickups where as Gibson Les Pauls comes from their three way selectors, multiple tone knobs, and humbucker pickups. Many other aspects of electric guitars affect the tonal qualities of the instrument, but the electronics cannot be overlooked. In this article, I will talk about different electronics in electric guitars as well as some common repairs. For more information about electric guitar pickups, see the electric guitar pickup page.
Small amps can benefit from being placed on a stand, rather than the floor, as reflections from the floor can muddy the sound. A stool or something similar will do if a stand isn’t available. For the same reason, when using larger stacks or combos with several speakers, try mic’ing one that’s furthest from the floor. Placing an amp against a wall will increase the bottom-end response, and placing it in a corner will emphasise the low end further still. A mellow tone can be achieved by pointing the amp into the corner and mic’ing from behind.

In all my years I have never seen filter cct's like this but as tleco tech the filters have never been variable, When I put my guitar together I had a 0.022uF and a 0.047uF and for reasons that I have long forgotten I put in a switching matrix that allows me to get 0.047, 0.022 and 0.015uF. After many revisions to the cct (it had coil taping and variable taping) I almost put in a 0.033uF and taking out the switching, well I ended up getting some single ended 9 Watt amp and all of a sudden this flexibility made scene I have one tone control that I can control the cut frequency a coil control pot and a volume control. Now the funny thing If I put in a single cap 0.015uF (as close as you can get) It doesn’t sound like the two 0.022 and 0.047uF in parallel, Its in the harmonics that get let through from what I can hear. But when all said and done could be something to give it a go.
Now that we’re done with the construction, let me discuss the pivotal aspect of playability itself. Having conducted scores of guitar lessons both online and offline, I am for one well aware of the fact that it only takes a few tiresome sessions with a bulky, full size guitar to scare them away from their lessons forever! Therefore, your first ever guitar choice is extremely important. A beginner’s guitar needs to be user-friendly and high on playability. On both these accounts, the Davisson Full Size Black Electric Guitar scores high. Not only is it lightweight and comfortable to wrap your fingers around, but also has a very neat and simplistic design to enables beginners for learning faster. The presence of a single Humbucker Pickup and the invariable absence of a pickup toggle, is not a hindrance but in fact a positive aspect of getting your grasp over your first electric guitar.
Previously, Epiphone guitars were considered to be the biggest competitor of Gibson. However, they were later acquired by Gibson who has retained the name of this brand to distinguish them from their pricey brothers. You can certainly consider it a budget-friendly production from the high-end guitar makers. Epiphone, just like the Gibson’s Les Paul, shares the same design but is available at a much lesser price. When it comes to craftsmanship, then we must say that Gibson is much better than this one. Unfortunately, Epiphone utilizes low-quality products such as mahogany and other electronic components.

• Ready-made sound : ELECTRIC SUNBURST offers a high-quality set of effects, amplifiers and cabinet emulation. Three distortion and four modulation effects provide the sound of classical pedals, while five amp models and a choice of ten cabinets offer an authentic guitar sound – exactly the same. Finally, a high-quality console equalizer, two compressors, tape emulation, reverb, delay and tap delay allow you to get a real guitar sound!
Pitchshifters change the pitch of the note played via a user-specified amount. The range of pitch deviation depends on the equipment used, but many pedals are capable of raising and lowering the pitch two octaves above and below the fundamental pitch. The amount of pitch deviation can be set or controlled via a foot pedal (which typically offers smooth, continuous pitch control). Typically, such function will be used with the original signal, resulting in a Harmonizer: the pitch is altered and combined with the original pitch to create two or more note harmonies. These harmonies are typically programmed in discrete integer multiples of the fundamental tone. When used with an expression pedal, it provides a smooth, abeit slightly digital, bend-like effect. Pitch shifters can also be used to electronically "detune" the instrument. Some examples are:
ACTION: fret low E at first fret and measure the distance from the bottom of the to the top of the 15th fret. It should be 5/64". Do the same with the high E, measurement should be 3/64". Now measure the string height at the nut; underside of the string to the top of the fret. Low E and A should measure 2/64", D and G =1.5/64" and B and high E = 1/64". If string height at nut is correct, recheck string height at 12th fret with strings open. Measurement for low and high E's should be the same as measurement taken at the 15th.

I bought my Norma accoustic in 1971 from a lady dealer who bought-out other stores going out of business. I paid $50. for guitar,case and strings. Best $50. I`ve ever spent. The sound gets better everyday. I have played the local market a lot, and fronted a Jamboree stage for 12 years (did the microphone work and sang), where I saw many a performer and their guitars come and go. Everyone was envious of my good sounding guitar. I applied a Dean Markeley electric pickup into the round hole and "wow" what a sound. Wouldnt take nothing for it. I own 7 accoustics,4 ele and three ele bass` guitars. I take my Norma everywhere. I am in the Georgia Music Hall of Fame and get lots of opportunities.

The Line 6 Spider IV is a good option for beginners not entirely sure what they are looking for. The amp models and effects allow it to achieve a wide variety of tones that are appropriate for almost any style of music. The Killer Ant and Hot Rod Pro Junior III do have better tones, but both are more expensive and less versatile. The Line 6 Spider IV is good for guitarists that want to be able to try a bunch of different sounds until they find something they like. It’s a very solid choice for any style of guitarist.
The original dreadnought shape was launched by CF Martin, one of the big names in acoustic guitars, and was named after an old English warship. It features rounded shoulders, and the neck typically joins the body around the 14th fret. The dreadnought strikes the most even balance between volume, size and ease of playing, and for this reason it has been used by just about every big-named player you can think of.
Note: When it comes to acoustics, I recommend you do NOT go super cheap (unless you know what you’re doing). I’m not joking about this. The results can be painful both physically and emotionally when you’re not able to learn anything. I made this mistake starting out and I regret it 100% (I’ll tell you about this later on). Save yourself the trouble. Get a decent, playable guitar to learn on and you’ll be one step ahead of most beginners who try to go cheap, then end up quitting because it’s too hard to learn (cheap guitars are hard to learn on!).
This product was not working and parts were defect. I don't know how some people made it works. The instruction was terrible and seller's wires description photos are more worse. I did not expect much for this little toy. Just piece of the junk. I was tried to return, but the seller said that I had to pay return shipping and he gave me a fake return shipping address.
From the low-string riff for “What Difference Does It Make?” to the deep tremolo textures and swooning string bends of “How Soon Is Now,” Marr always seemed to have the notes and the tone to suit the moment perfectly. Marr’s work has been profoundly influential to guitarists of the Nineties and beyond. Noel Gallagher of Oasis dubbed Marr “a fucking wizard,” and Radiohead guitarist Ed O’Brien has cited Marr as the reason he picked up a guitar. In essence, Marr is a classicist, drawing much of his approach from the guitar sounds of the Sixties British Invasion, yet deftly adapting those influences to rock and roll modernity.

Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.

It can be tough to know where to start when you’re looking at as many options as there are in the world of effects pedals. In fact, your first pedal may not even be a pedal at all – many amplifiers have built-in effects sections so you can get your introduction without having to attach an external stompbox. But if you have a more straightforward amp, or if you’re ready to try effects units that go beyond its built-in capabilities, there are some great varieties for novice users. And don’t forget that you can always look up the preferred pedals of your favorite guitar hero to inspire your own collection.
I have been a bass player and still am however I started on guitar at 12 and went back to it about 12 years ago. There really isn’t too much difference of perfecting your craft on either instrument. The most important thing to realize is when to play and when not to. I spent years learning how not to be a busy bass player and now that I have such a passion for playing guitar, I’m learning how to sound busy without really being busy.
The best guitarists of all time, voted on and ranked by many music fans, with photos and other info. With help from the wisdom of the crowd, you'll find a comprehensive ranking of the greatest guitar players in history. All the top guitarists are on this list - monster guitar heroes from rock, metal, blues, and alternative music. Are you on Team Eddie or Team Jimi? How about both!
Since treble frequencies pass through a capacitor, what would happen if you routed the positive lead THROUGH the capacitor rather than having it ground out frequencies?  The answer: just the opposite - the signal from you pickups would pass through the capacitor and only treble frequencies would get through.  Aha!  A new type of tone control.  The illustration below shows this type of wiring in a bit of an advanced concept.
Although acoustic guitars have recently surpassed electrics in popularity, the electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. If you want to play in a band, you’ll probably want an electric guitar. You’ll also want one if you want to develop the ability to play melodies and solos because electric guitars are, in general, better designed to accommodate fast fingering and more able to stand out in a musical group.
Due to the ever rising popularity of reverb, it didn’t take long for companies to figure out how to recreate the effect in early guitar amps. Have you ever heard of Spring Reverb or Plate Reverb? While to you these are just labels on a knob, back then these were real analog devices built into amplifiers. Needless to say, we have come a long way from using complex mechanical contraptions to create decent reverb.
Tube enthusiasts believe that tube amps produce a "warmer" sound and a more natural "overdrive" sound. Typically, tube amps use one or more dual triodes in the preamplifier section to provide sufficient voltage gain to offset tone control losses and drive the power amplifier section. While tube technology is, in many ways, outdated, tube amps remain popular since many guitarists prefer their sound.[15]
I believe that the best electric guitar amp for beginners is a straightforward combo amp, represented by the amps on this list. Avoid the bells and whistles of the fancier, feature-rich combo amps until you’re confident you have a solid set of playing chops. Then you can either move up to a modeling amp, or start adding effects pedals to your rig. The great thing about all the amps profiled above is that they provide a solid base for what ever effects you want to add to the mix later on down the road.

Guitar amplifier design uses a different approach than sound reinforcement system power amplifiers and home "hi-fi" stereo systems. Audio amplifiers generally are intended to accurately reproduce the source signal without adding unwanted tonal coloration (i.e., they have a flat frequency response) or unwanted distortion. In contrast, most guitar amplifiers provide tonal coloration and overdrive or distortion of various types. A common tonal coloration sought by guitarists is rolling off some of the high frequencies.