The ’55 hollowbody line consisted of no less than eleven guitars. Models included the EP-4, EP-5, EP-6, EP-7, EP-11, EP-12, EP-13, EP-14, EP-15, EP-16, and EP-23. Clearly, in these instances, the numerical designation indicates appointments, not the number of pickups. Some of these are likely to be thin-bodied archtops with no cutaways, some thinlines with a single cut, and some full-bodied archtops with a single cutaway, with either one or two pickups, and probably no vibratos.
I’ll give your guitar a thorough inspection inside and out, letting you know what is correct and what may need attention now or in the near future. Frets, neck, action, bridge and bridge plate, truss rod, tuners, and internal bracing are some of the things that are assessed. This service is provided as a courtesy to my customers and there is no obligation or pressure to buy anything.

Portland, OR was probably the place of import, but all the Lyles were 'licensed' copies of Gibson, they weren't seconds. The acoustic guitars were built in Japan, with laminated tops and sides. Over all construction on the guitars was very good for the materials used. I gave my Humminbird copy to my son after playing it for 25 years, and he still plays it today. Unfortunated during that 25 years, I had to have the bridge reset 3 times due to the weakness of the laminated top. My luthier asked me why I didn't just buy a Gibson or a Martin for as much money as I put into repairing that Lyle...I told him the tone was worth the extra expense.
If you can afford to start on an amp in the sub-$200 segment, you will see an instant upgrade in the amount of power as well as additional features. In this category you are looking at very good practice rigs, although as power is still pretty low they may not be suitable for more than small casual performances. This is the first category where you will find both amp heads and tube amps, although the choice of these is very, very limited. One of the best amps you can grab for under $200 is the Marshall Code 25W. This combo provides a solid tone, 25 watts of power and plenty of amp voices and effects to play around with.
I wish both of them bankrupt and disappear from the face of the earth to give way for new innovative brands with better pricing towards beginner musicians. I don’t care they are made on the blueridge mountains of Tennase or the shanty town in Shanghai. If they cann’t make a guitar to the new musicians for their liking, tradition or not they are garbage.
Finding a good pickup for an acoustic guitar is a real personal choice that will depend on your budget, style, aspirations, and the actual guitar you own – that’s why we’ve written a focused article on the best acoustic pickups. Among the myriad of acoustic pickups on offer, you’ll find the quickest to install are transducer pickups, which attach to the face of your guitar – an affordable solution, although the sound quality isn’t as advanced as others. A step up is both undersaddle and soundhole pickups, which have their own pros and cons, while – at the higher-end – you’ll find internal microphones and hybrid mic/pickup systems, which offer a beautifully rich, natural tone. A great example of one of these hybrid systems is the LR Baggs Anthem Tru-Mic.
{"product":{"id":"H91419","stock":"","price":"999.99","name":"Artstar AS153 Semi-Hollow Electric Guitar","download":false,"sku_id":"","checksum":"637145126000","rep_id":"site51352403996001740095","displayId":"1352403996001740095","sku_rep_id":"","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Semi-Hollow and Hollow Body Electric Guitars","dept":"Guitars"}
JAZZ :Al Di Meola , John McLaughlin ,Wes Montgomery ,Pat Metheny ,John Scofield,Django Reinhardt ,Larry carlton ,Joe Pass,Herb Ellis ,Eddie Lang , and again I still have in mind at least 10 more jazz guitar players that jazz is the hardest and more complex guitar composition and it is an awesome style or kind of music to play just because not everybody play can play jazz.
The guitar is just a small step on being a guitar player. Having a budget friendly guitar to practice and learn with is suitable enough at this stage. The key to success really depends on how you practice and dedicate yourself on learning how to play. As long as you have a decent sounding playable guitar to begin with and has the quality that can last you in years to come. You’ll be all set.
This full-size electric guitar from Davidson is all that you need to start playing master the very art of strumming. The quality, durability, comfort, and accessories that are required to get you started is included in this solid guitar package from Davidson. This is a full size (39 inches) and complete scale solid electric guitar made of maple wood. It is an electric guitar featuring a maple neck and gloss finish.
If the fuzz is the grandaddy, the Arbiter/England Fuzz Face (introduced 1966) is the grand-poobah of the grandaddies’ social club. A handful of other fuzzes came first, but this distinctive round, smiling box is the one most guitarists point to when identifying the fuzz tone of the gods. Why? Two words: Jimi Hendrix. Apparently he died and took it up there with him. Oh, and two other words: germanium transistors. When these fuzz fans point to the Fuzz Face, however, they don’t point to just any Fuzz Face. They point to a good one. The quality of these pedals varies wildly, mainly because the tolerances of germanium transistors themselves varies wildly and sorting out the good ones was more work than the makers could afford to put in (or, perhaps, knew was necessary). Contemporary makers from Fulltone to Z.Vex to Mayer take the time and trouble to laboriously sort their germanium transistors, and it pays in spades in terms of tone and consistency.

The materials and the methods of classical guitar construction may vary, but the typical shape is either modern classical guitar or that historic classical guitar similar to the early romantic guitars of France and Italy. Classical guitar strings once made of gut are now made of such polymers as nylon, with fine wire wound about the acoustically lower (bass side) strings.
My cousin Mike had a red Lotus LP Custom copy that his mom got for him, it was a bolt-on one, looked just about like the one you have in your pic. It played pretty nice, but the tuners and pickups sucked. We added a set of Grovers and a pair of (then popular) DiMarzio super 2 pickups. Mike used this Lotus guitar for 3 or 4 years until he got a Guild s-100. He sold the Lotus for 125.00 after taking off the DiMarzios and Grovers. He gave me those parts and I installed them on a stripped and mutilated 71 SG Standard that I painted with auto enamel (a nice Candy red). I later sold the SG to Mike. The lotus had a plywood body and was pretty cheap, I wouldn't pay a 100 bucks for one today, if anything. But, back then, it was as good as any, we worked with what we could get. I know we played some excrutiating unison leads (ala Blackfoot, Molly Hatchet,etc) he with his souped up Lotus, me with my Memphis Strat copy, both plugged into my bitchin solid state Crate (looked like a real wooden crate!) amp.

Here we have a real vintage Rare IBANEZ CONCORD beauty from the Golden Era of the Best Japanese Martin D41 style guitars period... This example is Ibanez Model #679 and is the Top of the Line and is an exact Martin copy and is a great " Law Suit " model from the era where Ibanez set out to make the best guitars worldwide period...Fit and finish even after 30 years it is simply superior it appears to be thin old school Nitrocellulose Lacquer finish, this guitar was constructed using the best woods very ornate intricate triple bindings with lots of beautiful inlaid abalone on the Brazilian Rosewood fretboard and the spruce top body WoW...please do have a very good look ...This example has employed the best exotic woods in its construction, The top looks to be solid no seam edge showing at sound hole some pick wear and looks solid, the sides & back also look the same on the inside and outside grain matches so again it looks to be solid?.... A high grade mahogany neck, Sitka spruce top, Choice Indian Rosewood sides & back, and what seems to be a beautiful Rich Chocolate brown Brazilian Jacaranda Rosewood fretboard with gorgeous abalone, frets show some wear lower several yet plays excellently all the way up with very good action and fast & plays easily...Neck width is a nice slim-med super comfortable 1-3/4" at the nut with no buzzing all the way up action is good set at 5/32nds @ 12th fret. This guitar has been well played and well taken care of and is a good professional grade instrument ready to record tonight. Cosmetically this is a 8.5 out of 10, A real vintage player that has not been abused at all yet has been lovingly well played its tone has richly mellowed with the years and only improved with its age and now after 30 years it shows this wonderful patina that can not be replicated that only comes with age, vintage is not for everyone some like it new we understand that this vintage Martin Copy Japanese Guitar however is not new or is it in mint condition yet it is very beautiful in vintage terms of mellowing with age and patina Wow this is for the TRUE VINTAGE LOVER... also you Ibanez Collectors of Japanese vintage. Its Sound is second to none it has nicely articulate lows with nicely contrasting bright highs and the mid-range has a good punch and ring when finger picked, full on sweet big tone when strumming open cords. This one is a real pleasure to play and is EZ on the eyes too. These are really great old classic guitars and are getting very difficult to find now in anywhere near this kind of vintage condition...its all original and the original tuners work very well with no need to change them out they are keeping the guitar tuned cracks or repairs non needed , excellent original neck set and angle, intonation is good. This Rare beauty is conservatively JVG condition rated at very good - excellent in a 30 year old Vintage guitar...amazing looks and tone & playability in a real vintage collectible that your not going to want to put down.. Every bit as good as the much more expensive Martin for a fraction of that. Any questions ask? .

Schooled in flamenco and jazz, Robby Krieger pushed beyond rock at a time when most players were still bound to the blues. In the Doors, he had the improvisatory flair to follow Jim Morrison's wildest journeys, wrote some of their biggest hits ("Light My Fire"), and picked up the slack in their keyboard-drums-guitar lineup. "Not having a bass player… made me play more bass notes to fill out the bottom," he said. "Not having a rhythm player also made me play differently, to fill out the sound. I always felt like three players simultaneously."
Whether you’re young or old, there’s no better feeling than learning to play an instrument. While many attempt to learn the guitar, it is unfortunately very common for beginners to give up after only a couple of months. Guitar lessons with an instructor can be expensive and it can be frustrating if you’re not seeing progress immediately. That’s where ChordBuddy steps in, offering one of the easiest and quickest ways to learn to play the guitar in 60 days or less. Simple, effective, and affordable, this guitar learning device has shown great success among beginner guitar players of every age. Use this handy guide to learn everything you need to know as a beginner guitarist. You’ll be playing your favorite song in no time at all!
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Hauptfeder Anschlag Tremoloblock Anschlagstab Bei richtig gestimmter Gitarre stellen Sie die Hauptfeder ein, um sicherzustellen, dass Anschlagstab den Tremoloblock und Anschlag berührt. Wenn der Anschlagstab nicht den Tremoloblock und Anschlag berührt, stellen Sie die Hauptfeder- Einstellschraube ein, bis Kontakt hergestellt ist.
A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:
The Effect: Expression pedals are nowhere near as popular as some other guitar effects. However, they have the power to make or break your guitar tone, depending on how far you are willing to go. At their very core, expression pedals are nothing more than a potentiometer in a pedal form. They can be as simple as that, which is represented beautifully by the Mission Engineering Inc EP­1, but there definitely are more advanced designs available. The purpose of an expression unit in your signal chain is to give you more control over equipment which supports this kind of accessory. We’re talking rack mounted effects, digital processors, guitar effects pedals and more. In some cases they are downright necessary, but in most they offer a whole new level of control over the effect in question. Despite their inherent simplicity, finding a good one still take some effort, lots of research and planning.
While Laney brand might not sound as familiar to the “uninitiated”, this brand has been producing quality amps for very good prices. The  LG12 is a combo amp with 12-watts. While 12-watts isn’t much it seems to kick in a punch when needed (and plus, you want it for practice and more practice amps don’t have a lot of wattages). Apart from that this combo offers  LG12 12 single channel with switchable drive, CD input, headphone socket (a much for practice) as well as Bass, Middle and Treble control. The tone of this amp is pretty crisp and clean. That’s partly due to the 6.5″ custom-designed speaker. The speaker is not only functional but looks pretty nice. Looks wise this model has top mounted construction, rubber feet for sturdiness and leather handle for ease of transportation. Apart from being a great practice amp, it is also great if you travel around and want a model that can take a punch or two.

I played electric guitar in a band from the age of 12 through to the age of 36, then gave it up. Now, at the age of 68 I want to get back into playing. I went into a store and tried playing and found that my fingertips really hurt! Are there any electric guitars where the metal strings don’t hurt or do I just need to “grin and bare it” until my fingertips get calloused again?

The original dreadnought shape was launched by CF Martin, one of the big names in acoustic guitars, and was named after an old English warship. It features rounded shoulders, and the neck typically joins the body around the 14th fret. The dreadnought strikes the most even balance between volume, size and ease of playing, and for this reason it has been used by just about every big-named player you can think of.
This deal leapt out of the page at me straight away. The Fender Squier series has been around a while and even though it’s a budget guitar, you can always rely on Fender for great quality. But what I like the most about this package is that everything you need is included (apart from a guitar stand) and the Frontman 10G amplifier has some extra features that are excellent. The amp has an input for a playback device to jam along to (like your iPad or Smart phone, or even a CD player) plus a headphone output for when the neighbours get too annoyed. A Gain control and Overdrive switch let you grunge everything up, or you can dial it back to a classic, clean Fender sound.
If the book had been proofread better, I'd give it 5 stars. For example, there are places where the text has both a fret number and standard musical notation, and the fret number is wrong. The book refers you to play along with the instructional CD backing tracks, but it doesn't tell you which track number to play. It's easy enough to figure out what was meant, but a little more care would have been better.
CostHelper Electric Guitar Guide - [New Window] - Find out how much an electric guitar should cost. Get price guidelines and shopping tips for an electric guitar. A basic electric guitar with amplifier and cord starts around $200 to $400 for a beginner's outfit; a better quality kit can run $500 to $2,000, and high-end electric guitars are $2,000 to $5,000 or more for the instrument alone.
The original Les Paul featured a solid mahogany body capped with a maple top, which produced an instrument capable of many tonal variants with maximum sustain.  Although the first Les Pauls included two P-90 pickups, they are most well known for their two PAF humbucking pickups.  While many variants are produced, the double humbuckers put the Les Paul in a league of its own, separate from the offerings of Fender’s Telecaster and Stratocaster.

An excerpt: “Quite a few of the artists I’ve worked with have told me that my own personal style might be described as flashy. In this book, we will definitely cover the hotter aspects of playing, not only regarding lead styles, but rhythm techniques, too. What I’ve found after years of experience in the studio and onstage with many different types of artists is that a guitarist can modify his playing and adapt it to the requirements of the particular situation while still revealing his own distinctive musical personality.”

The body of the guitar is usually made of wood; different types of woods are used by different manufacturers, and there is ongoing debate concerning which is best. Typical woods include maple, mahogany, swamp ash and alder for quality guitars, and plywood or pine for cheaper, less durable guitars. While the type of wood used in the solid body of an electric guitar will noticeably affect the sound it produces, the quality of the sound is most affected by the pickups which convert the vibration of the strings into an electrical signal, as well as the amplifier that's used to shape and model such signal. We could go on and on dissecting the technical aspects of electric guitars, and yet never get close to that which makes that music unique: it's soul. That's something that can be clearly felt and experienced by players and listeners alike, but which all the while can hardly be put into words. Enjoy the electric guitar music loops!

You've bought most ANY new guitar that sells for less than about 700-bucks.  Seriously.  These days there are LOTS of really decent guitars out there in the $300-$500 price range.  Guitars designed well (and by that I mean ripped-off from Leo Fender), with bodies and necks that have been cut precisely by high-end CNC machines, decent hardware, and again a nice CNC-finish on the frets and good-looking automated paint jobs.  All in all, a guitar that plays well, intonates and stays in tune well, and looks great.  But ... sounds mediocre!  Yep, ALL manufacturers skimp on the pickups today, at least on any guitar less that about  $700-$1000.  Great guitar with midlin pickups?  Yea, fix that!
3. Peavey Vypyr VIP 2 40-watt 1x12 ($199): This amp is an all-in-one powerhouse, equally capable of handling electric guitar, bass and acoustic all in one amp. Not only is it capable of effects modeling, it can also handle instrument modeling, giving the player access to acoustic, violin, bass and many other stringed instruments. As far as effects go, it boasts more than 25 effects with controllable parameters and with over 40 watts of power, it’s even ideal for rehearsal.
One of my favourite hardware effect units is the Electrix Mo-FX (sadly no longer in production). It is superbly constructed for hands-on performance and it offers full MIDI control over the panel's knobs and buttons. I use this in conjunction with the Sequentix P3 (a hardware step sequencer). Not only can the P3 generate patterns of controllers suitable for varying multiple Mo-FX parameters, but it can generate evolving or shifting patterns, courtesy of its 'accumulators'. In a nutshell, accumulators are designed to prevent your sequences becoming annoyingly repetitive: controller values (actually values directed at any internal sequencer parameter) can be added or subtracted on each pass of the pattern, with rules and limits directing the behaviour as the accumulation progresses. Digging through the Mo-FX manual quickly reveals all the MIDI Continuous Controllers you need. Usefully, you can also trigger the tap-tempo function via MIDI, and this offers a rather wonderful way of generating clock intervals. As you can decide exactly where to place your tap-tempo trigger events, and the P3 sequencer can shift or vary these events according to rules you devise, you can find clock sync intervals unseen on any other device. Paul Nagle

Patti Smith famously described Tom Verlaine's guitar sound as "a thousand bluebirds screaming." Television's leader soaked up the flavor of favorite records by John Coltrane, the Stones and the Dead – then synthesized them into something entirely new on the band's 1977 debut, Marquee Moon, spinning out endless fluid solos in concert with fellow guitar aesthete Richard Lloyd. Verlaine has kept a low profile in recent decades, but he remains a model for generations of guitarists with a taste for both punk violence and melodic flight.
On Martin guitars, this is a really big deal. Martins all seem to have a problem with the "neck set" on many of their guitars before 1970. High string action is the result, making the guitar very difficult to play. This can only be fixed correctly by a "neck set" (removing the neck on the guitar, and refitting the neck at a slightly increased angle, which lowers the string action). If done correctly, this does not affect the value of the guitar (and in fact can make it more valuable, as the guitar is much more playable). Generally speaking, most players would agree if the "string action" is more than 3/16 inch (5 mm) at the 12th fret, the guitar needs a neck set. This measurement is taken from the bottom of the low-E string, to the top of the 12th fret.
{"pageName":"[mf] pdp: el dorado vintage handtooled leather guitar strap","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: accessories: fretted instrument accessories and parts","prop1":"[mf] shop: accessories","events":"event3,prodView","evar51":"default: united states","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";361014","linkInternalFilters":"javascript:,","channel":"[mf] shop","prop7":"[mf] product detail page"}
In terms of usage, it is quite similar to the mini Strat guitar we discussed earlier. It is a great choice for someone who just wants a cheap electric guitar for practice or someone who is an absolute beginner. Also, it is one of the best choices for five to fifteen years old kids wanting to learn guitar. It comes with small ¾ sized bodies and a 22.75inch of scale length. It has a c shaped fine maple neck with its 20fret fingerboard. 
{ "thumbImageID": "TMB100-Electric-Bass-Guitar-Soda-Blue/J18871000006000", "defaultDisplayName": "Ibanez TMB100 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Flat Walnut", "sku": "sku:site51500000037119", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Flat-Walnut-1500000037119.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Flat-Walnut/J18871000009000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Soda Blue", "sku": "sku:site51418053839849", "price": "159.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Soda-Blue-1418053839849.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Soda-Blue/J18871000006000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "White", "sku": "sku:site51418053839859", "price": "159.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-White-1418053839859.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-White/J18871000008000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mint Green", "sku": "sku:site51418660057607", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Mint-Green-1418660057607.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Mint-Green/J18871000005000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51418660057427", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Black-1418660057427.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Black/J18871000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ivory", "sku": "sku:site51418660057317", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Ivory-1418660057317.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Ivory/J18871000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tri-Fade Burst", "sku": "sku:site51418660057447", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "285.70", "priceVisibility": "1", "skuUrl": "/Ibanez/TMB100-Electric-Bass-Guitar-Tri-Fade-Burst-1418660057447.gc", "skuImageId": "TMB100-Electric-Bass-Guitar-Tri-Fade-Burst/J18871000004000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

But the biggest difference between the American Special Strat and the Highway One model is in the pickup configuration. This guitar comes equipped with three Texas Special single-coils, which are overwound Alnico V pickups known for their tight bass, clear highs and pronounced mids. Famously, they’re also found on the Stevie Ray Vaughan signature Strat. And significantly, these pickups retail for about $200 for a set of three.

The Fretted Synth website has mysteriously disappeared (the likes of Native Instruments not happy that they’re giving away so much goodness for free??), so we’re linking to the Rekkerd page that still seems to host the plugins. FreeAmp3 really shouldn’t be free: it features masses of sound-shaping potential and the user interface looks great. If you just want one (free) VST guitar plugin, get this.

I like the pseudo PTB scheme where the tone cap (I prefer .033 or .022mF) is attached to lug 3 of the pot and to ground. Lug 2 is connected to the Volume pot’s lug 1 and there’s an additional small cap (0.001mF or smaller) connected between tone pot lug 1 and Vol pot lug 2. Assume both pots are Log types: with tone at 7.5 (ie halfway along the pot’s sweep) there is no appreciable treble cut, and the volume pot gives a pretty even tone throughout its range. With tone pot higher than 7.5 bass is cut as you roll back the volume, with tone pot lower than 7.5 treble is cut. Minimum bass setting – vol approx 3, tone full up. Minimum treble setting vol full up, tone full down. I have this in most of my guitars and love it.

A closer look at a 1981 Gibson Victory MV-II electric guitar. The Gibson Victory MV, or 'Multi-Voice' guitars had very wide tonal palettes; with coil-tapped humbuckers they could produce typical Gibson tones, but were also designed to 'out-Fender' Fender. Two models were launched in the summer of 1981. Whilst the MVX, was designed to do everything a Stratocaster could do, the MVII was 'primarily for the discerning country player' - placing it squarely against the Telecaster.
The Fender Bassbreaker 15 Amplifier Head presents a budget friendly option for those in need of great tone. You have 15 watts of pure power to channel here as well as a studio friendly Power Amp Mute so you can record straight into a desk - a great feature for those in need of a powerful stage and studio amplifier. This is a professional grade amplifier head that features 3 very unique tonal options and overdrive levels to provide you with a whole host of lush fender tones that range from glass like cleans to vintage overdrive. Perfectly paired with the Fender Bassbreaker 212 Guitar Cab.
The AEG10II combines laminated spruce top with mahogany back and sides, and packs both in a thin profile body. Thin bodied guitars, while more resistant to feedback than their larger counterparts, don’t have the breadth of tone or the volume of a full sized acoustic guitar. The cool thing about this guitar is that, it’s one of the cheapest ways for beginning musicians to get a solid gigging instrument.
The looper is a little more limited and offers shorter loop time than its competitors (20-seconds), but hey, at least it has a looper. The inclusion of a USB means you can hook the DigiTech RP500 straight to your computer and start recording riffs and ideas. If you like, you can use the included Cubase LE software for all your recording needs. Furthermore, just like with the other pedals on our list, you can manage and adjust your presets from the provided X-Edit Editor/Librarian software, which is quicker and easier than scrolling through the menus on the unit itself. The DigiTech website has a pretty extensive Tone Library, where you can download and use a bunch of patches.
If you're getting your amp for the purposes of playing out with a band, it's very tempting to invest in a large amplifier, whether that means a big combo or a half-stack (don't even mention a full stack). I get it; it's what the pros use when they're rocking out at festivals. The reality there is that the vast majority of the time, whenever you see a guitarist with a wall of sound, it's comprised mainly of dummy cabs with no actual speakers. It's for the look.

Aaron Staniulis is not only a freelance live sound and recording engineer, but also an accomplished musician, singer, and songwriter. He has spent equal time on both sides of the microphone working for and playing alongside everyone from local bar cover bands to major label recording artists, in venues stretching from tens to tens of thousands of people. Having seen both sides at all levels gives him the perfect perspective for shedding light on the "Angry Sound Guy." You can find out more about what he’s up to at
Like effects pedals, multi-effects processors are used to modify and alter the clean signal of your guitar to produce a large variety of effects (reverb, wah-wah, overdrive, distortion, chorus, etc). Unlike a simple pedal that gives you one or two options for modifying tone, a multi-effects processor has a full load of effects and sounds that allow you to play music with a rainbow-colored tonal palette. There are processors for modifying guitar, bass, and even units for vocalists with pitch-correction tools and harmonizer effects.
I've been a guitar player for decades but only recently became serious about working on my instruments. In my research, I’ve found hundreds of articles about instrument repair, and while many are fantastic and chock full of information that’s invaluable to musicians, a lot is impractical or requires more space or specialized tools than most of us have. Plus, some repairs, such as fretwork, nut replacement, under-saddle pickup installation and finish repairs are best left to professionals.
The Fender CC-60SCE acoustic-electric guitar combines the powerful onboard electronics with classic Fender tone and the comfort of their longstanding craftsmanship. The smaller concert body features a solid spruce top, mahogany back and sides, and "Easy-To-Play" neck, making it a perfect choice for beginning to intermediate level players looking to take the next step in their music. 
If you aren't planning to be in a band, i would get a modeling box like a POD, and just play on headphones. If you have the cash, I would just buy things here used on Craigslist, then sell them when I was leaving. If you know your prices, you could use the gear and get all your money back. Voltage issue is a problem with amps, one that is solvable, but seems like hassle for you. it really depends on your needs when here though.
All mass-market brands offer at least one distortion pedal—and often many. Boss, for one, tries to cater to all possible tastes. Its DS-1 (not to be confused with the SD-1 overdrive mentioned above) is one of the workhorses of the breed, with some big-name players happy to stomp on its rectangular switch, including both Steve Vai and Joe Satriani. The DS-2 takes things a step further, while the MT-2 Metal Zone and MD-2 Mega Distortion get successively more evil. And Boss isn’t the only one, with DOD, Ibanez, Marshall and many, many others playing the game too, along with a few of the boutique makers. The proliferation is most distinctive in many “metal” pedals that go beyond even the standard distortion sounds. These generally offer the archetypal scooped-mid sound with thudding lows and crispy highs. Many are adjustable for anything from classic rock to metal sounds, with a tone control that acts more to reduce or accentuate mids rather than the usual high boost/cut, and often a “resonance” control or similar to adjust the fullness of the bass.

This may seem like an odd value to consider, but most guitarists need to feel a certain connection to their instrument. It’s part of what makes being a guitarist different from other types of musicians; a sense of individuality as well as style. Your guitar will be a significant investment regardless of which brand you settle on, and while sound and construction are more critical factors overall, it’s important that your instrument inspires you. Different brands are known for cultivating different images; Gibson’s and Fender’s were made famous by the rock gods of yesterday, while Taylor’s unique acoustic bodies will conjure up a different vibe for a folk player. Again, this aspect speaks to your individual needs as a guitarist.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars: epiphone","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"epiphone","prop5":"[mf] shop: guitars: electric guitars","prop6":"[mf] shop: guitars: electric guitars","prop3":"[mf] shop: guitars: electric guitars","prop4":"[mf] shop: guitars: electric guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}

In 1974 Martin Sigma electrics included two SGs, a Tele and a Fender bass. The SBG2-6 was pretty much a straightforward SG copy with a bolt-on neck, center-peaked three-and-three head, block inlays, large pickguard, twin humbuckers, finetune bridge, and stop tailpiece, in cherry. The SBG2-9 was pretty cool, with a natural-finished plywood body, white pickguard, rosewood fingerboard with white block inlays, gold hardware and Bigsby. The SBF2-6 was a Tele with rosewood fingerboard, three-and-three head, block inlays, neck humbucker and bridge single-coil. The SBB2-8 was the bass, with natural finished body, three-and-three head, rosewood ‘board, block inlays, white ‘guard, and two humbucking pickups.
The Ibanez RG series is basically synonymous with shreddable metal music. Inspired by the classic JEM series of the glammy 80s rock years, this GRGR120EX guitar is perfect for the guitar player who aspires to be a real metalhead. The body is made of solid alder and it comes with a slick black binding. There are two super-high-output, extra-snarly Infinity R pickups that will respond well to overdrive and distortion pedals. Moreover, a rosewood fingerboard with classic Ibanez sharktooth inlays and sharp black hardware make this guitar look like the real deal.
John Scofield (b 1951) is an American jazz guitarist and composer, who has played and collaborated with Miles Davis, Joe Henderson, Charles Mingus, Joey DeFrancesco, Herbie Hancock, Pat Metheny, Bill Frisell, Pat Martino, Mavis Staples, Phil Lesh, Billy Cobham, Medeski Martin & Wood, George Duke, Jaco Pastorius, John Mayer, and many other artists. Scofield had played a 1981 Ibanez AS-200 as his main guitar for over 20 years.[26]
Fender released the first successful solidbody electric guitar, the Broadcaster, in 1950. (Remember, the original Esquires were problematic.) Gibson produced the first Les Paul 24 months later. And a mere six years after that, a small run of sunburst Les Pauls flowed out of Gibson’s Kalamazoo, Michigan factory. Originally just another instrument, those Les Pauls now occupy a mythic status in the minds of guitarists and collectors everywhere. The instruments, along with a small handful of Fender Stratocasters and examples from one or two other manufacturers from roughly the same era, represent the Holy Grail in guitar tones.
If you want to measure the fret size on existing instruments, a good way to do it is to get an inexpensive dial caliper (think Harbor Freight etc).  You can measure the width with the outer jaws (make sure to zero out the calipers for accurate measurements), but for the height (unless you are going to notch the depth rod and subtract the difference), use a piece of something of a uniform thickness and drill a hole in it to accomodate the depth rod, place it across two frets and measure thru the hole (usually near the crown) to the fingerboard and subtract your piece's thickness.  When measuring fret height, it is always good to measure a few different places on the neck as the height may vary according to leveling and wear. On many guitars (but not all) the upper frets (if there is not a neck joint area hump that was accounting for during leveling) will be a good indicator of fret height.
The Ibanez TSA15H gets most of its high ratings from users who love the sound of a cranked tube amp, because this is where it excels. This is especially true of guitarists who use single coil guitars, but there are some humbucker users who are just as impressed. Even experts commend the amp's dynamic response, Premiere Guitar's Kenny Rardin comments: "It feels and responds like a good tube amp, and varying the controls dials in the response even further". Value for money and reliability are also commended, as expected from Ibanez.

The 2-6kHz region is good for adding bite or presence to guitar tracks at the mixdown stage.There is no 'right' electric guitar sound because the instrument has no natural sound, so you can use as much EQ as you like without feeling guilty. Even so, getting something close to the desired sound at source is always the best way to work. Should you need to use EQ, here are a few comments concerning the frequency areas you might want to tweak. Boxiness tends to occur between 100Hz and 250Hz, so if this is a problem, use a parametric to tame it. Experiment with the Q setting as you may be able to notch out a narrower section than you think to get the desired result. Cabinet thump can be accentuated by boosting at around 80-100Hz, but take care not to boost anything much lower than this, as you'll just bring up unwanted resonances and hum.
{ "thumbImageID": "1984-Explorer-EX-Electric-Guitar-Alpine-White/H77720000002000", "defaultDisplayName": "Epiphone 1984 Explorer EX Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Alpine White", "sku": "sku:site51316049519074", "price": "749.00", "regularPrice": "749.00", "msrpPrice": "1,248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/1984-Explorer-EX-Electric-Guitar-Alpine-White-1316049519074.gc", "skuImageId": "1984-Explorer-EX-Electric-Guitar-Alpine-White/H77720000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51316049519054", "price": "749.00", "regularPrice": "749.00", "msrpPrice": "1,248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/1984-Explorer-EX-Electric-Guitar-Ebony-1316049519054.gc", "skuImageId": "1984-Explorer-EX-Electric-Guitar-Ebony/H77720000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Most of the time, a chord diagram will not show you the finger numbers. They will leave that up to you, because different people sometimes play chords differently. Some people cannot play an A chord like this, because their fingers are too big, and this fingering is very cramped for them. Instead, they play an A with a mini-barre, using the same finger for more frets. For example, I could bar my 1st finger across the 4th, and 3rd strings at the second fret, then place my 2nd finger on the 2nd string, second fret (see image on the left). This gives me more room between the frets, and also frees up my 3rd and fourth fingers to pick out melody and bass notes. It’s just a preference, you can play the chord how you prefer.
You can assemble your own system from disparate components, hardware and software, and spend a lot of time and confusion getting them all to work together. But the easiest and ultimately most cost-effective route is to purchase one of the least-expensive Apple Macintosh computers, all of which come with Apple's free GarageBand software installed. This will provide you with a wealth of tools for amp emulation and effects in an integrated environment for multi-track recording and editing (and it includes a wealth of drum machine, synthesizers, and sampled instrument libraries as well.) If you outgrow Apple GarageBand, you can suppliment it by purchasing Apple MainStage for $30 and/or Apple Logic Pro for $200.
Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.
I wish both of them bankrupt and disappear from the face of the earth to give way for new innovative brands with better pricing towards beginner musicians. I don’t care they are made on the blueridge mountains of Tennase or the shanty town in Shanghai. If they cann’t make a guitar to the new musicians for their liking, tradition or not they are garbage.
Dont buy too cheap. The cheaper the guitar, the harder to play and the less quality the sound. You want a rewarding feel and sound or you will get discouraged. Buy a better guitar used than a new one cheap. Are you going to learn chords or fingerpicking ? Some guitars are better sounding for one than the other. Some like Taylors are versatile and provide good sound for both. Be smart. Good luck.
Most seven-string guitars add a low B string below the low E. Both electric and classical guitars exist designed for this tuning. A high A string above the high E instead of the low B string is sometimes used. Another less common seven-string arrangement is a second G string situated beside the standard G string and tuned an octave higher, in the same manner as a twelve-stringed guitar (see below). Jazz guitarists using a seven-string include George Van Eps, Lenny Breau, Bucky Pizzarelli and his son John Pizzarelli.
Electrical impedance is like two different sizes of hose. High impedance is like a garden hose, Low impedance is like a fire hose. The amount of water pressure coming through a garden hose is great for reaching your garden but if you need to run a long length of hose up the street, the pressure from a garden hose will give out after a certain distance. You definitely need that high pressure fire hose.
2.  Cracked peg head.  Customer “fixed” with mystery glue and a wood screw.  Result:  Peg head and neck shaft not aligned. Fix: If the peg head can be re-broken you may be able to re-align the neck and re-glue (if it was glued with aliphatic glue you won’t be able to as the glue will not stick to itself).  The joint may have to be resurfaced and new wood may have to be inserted, possibly a spline as well.

While styles and models may vary, electric guitars operate on the same general principles. The pickup mounted on the electric guitar’s body functions as a magnetic field. When a metal string is plucked and vibrates, it generates a current. That current is transmitted by the pickup through a preamp circuit with tone controls to the guitar cable, and in turn to the amplifier. The amplifier boosts the signal and modifies it with various tone controls and effects, depending on the amplifier's design and capabilities. The signal is then output to a speaker, which converts it to sound waves. The type of pickup(s), tone controls, strings, playing techniques, and other factors built into the guitar's design all influence the signal that is sent to the amplifier. In short, each component of the guitar affects how the guitar sounds.

Gibson Brands, Inc. is considered as an American producer of guitars and other instruments, which is located in Nashville, Tennessee. The brand was earlier known as Gibson Guitar Corp. The company was founded by Orville Gibson in 1902. They are famous for its innovative and superior quality guitars. They sell their guitars under different brand names. These guitars are available at little higher rates. The price range starts from Rs. 49,500/- onwards (approx). For more details, visit
Although I’ve spent most of my life focusing on audio journalism, I’ve been active as a musician since taking up guitar seriously in the 1970s, and I have played lots of gigs with jazz, rock, and folk groups in New York and Los Angeles. I now play mostly double bass and ukulele; I currently play in three jazz groups in Los Angeles, and I sub regularly in a couple more groups. I also conduct more-or-less weekly jazz jam sessions at my home, where I accompany numerous guitarists of widely varying skill levels, toting all sorts of axes. Having conducted innumerable multi-listener comparisons of audio products over some 25 years, I have a good idea of how to make product tests fair.

Electric basses tend to use a medium jumbo fret as most Fenders have thru the years.  There are some folks who like the medium or even the very narrow/small mandolin fretwire for basses – this is more of a vintage feel, like the earliest Fender basses (Fender created the Precision Bass in 1951).  Since string height for bass strings is higher due to gauge and tuning, they are easy to grip and many bassists do not seem as concerned about fret height as guitarists. offers 50 german guitars brands products. About 34% of these are guitar, 30% are wood router, and 6% are other musical instruments & accessories. A wide variety of german guitars brands options are available to you, such as free samples. There are 50 german guitars brands suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of german guitars brands respectively. German guitars brands products are most popular in Western Europe, North America, and South America. You can ensure product safety by selecting from certified suppliers, including 22 with ISO9001, 4 with BSCI, and 2 with FSC certification.

I think singing with confidence without too much doubt was a satisfying thing. It was, artistically, very satisfying to be covering subject matter that means something to me. I think a little bit of that was getting to know yourself. And just the simple fact that I was ready to do it now. Everything else I'd done since going out on my own in '87 has been absolutely amazing to me, and I feel like the luckiest guitar player alive, and I am very grateful.

Traditionally, the vast majority of professional engineers prefer to record electric guitars through a mic’d up amplifier, rather than use a DI (direct injection) box, even though specialist guitar DI units are readily available. That said, there are many pracitcal reasons to split the signal from the guitar and use a DI box in conjunction with an amp. If you find out later that the recorded amp sound doesn’t work in the mix, or you wish you hadn’t committed a particular effect ‘to tape’, the pure guitar sound can be re-amped and subsequently reprocessed without the need to discard a great take. You can route the DI’d signal through a modelling plug-in and blend that with the mic’d amp sound, too.
Rickenbacker has produced a number of uniquely designed and distinctively trimmed acoustic guitars. Although a small number of Rickenbacker acoustics were sold in the 1950s and were seen in the hands of stars like Ricky Nelson[9]and Sam Cooke,[10] the company concentrated on their electric guitar and western steel guitar business from the early 1960s onward. From about 1959 through 1994, very few Rickenbacker acoustic guitars were made.
The pre-1945 braces have a scooped or "scalloped" profile, making them lighter in design and weight. Functionally this means a greater vibrating surface (the guitar's top), and provides stronger bass response. Why did the Martin Company change from the lighter scalloped braces to heavier braces? The answer is in the strings. Many guitarists of that time were using heavier gauge strings, and these heavier strings were tough on the lightly constructed scalloped-braced Martins (especially on D-models with the long 25.4" scale). Martin didn't make a heavier guitar to withstand the extra string tension, so they compensated by adding more rigid (non-scalloped) braces to the guitar's top.
Some guitarists consider the notion of modifying an electric guitar from its stock configuration distasteful, while others consider it mandatory. As a custom builder with a decidedly vintage background, I fall somewhere in between. Generally, I’m most in favor of maximizing an instrument’s usability without jeopardizing the ability to return it to original condition.

It looks cheaper the more I examine it... super easy to play though. the truss adjustment bolt is far enough back from the sound hole that I could only reach it with the longer end of the crappy allen wrench I found, and then the tiny end I had left couldn't really leverage. I'll have a few more of those (better ones) once I clean my place though. The saddle barely pops out from the bridge but the bridge has this weird curve that makes the string angle like normal to the pins. Just poked my hand in and its not even X-braced. I'm sorta confused. It's different.
"I have purchased 15 personalized guitars from the top guitar custom shop. All the guitars have met or exceeded my expectations. Great workmanship and quality work. An exceptional group of people to work with. They are ready to answer your questions or concerns. The one time i had a concern about a guitar they responded immediately and handled the situation more than i expected. I highly recommend this company!" Dr E C Fulcher Jr - Abingdon, Maryland USA.

{"pageName":"[gc] pdp: musicians gear electric acoustic and bass guitar stand","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: accessories: stands and racks","prop1":"[gc] shop: accessories","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers: guitar stands","prop6":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers: guitar stands","prop3":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers","prop4":"[gc] shop: accessories: stands and racks: guitar stands and wall hangers: guitar stands","products":";451058;;;;evar65=New-Accessories-Musician's Gear","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}

Their selection these days is insane, especially since they target a lot of awesome smaller brands that NOBODY else in the area carries. I'm pretty sure this is the only place in town you can go to play the Reverend line, not to mention damn near every PRS model currently in production. The locally-made boutique stuff they stock is awesome too, and I would have never even known about it had it not been for the shop.

There is a weekly newsletter that features lessons from different genres and difficulty levels. Whenever I open that newsletter I feel compelled to try out that featured lesson. I believe that this is a big reason why my guitar playing is improving so quickly. I am continuously trying out different styles and techniques and I get better overall while doing this and having fun.

Because IRs can be recorded in virtually any space, convolution reverbs generally come with a library of IRs ranging from small live rooms to famous venues, top studio rooms, forests, canyons, railway stations and just about anything else you can think of. They sound very convincing, and there's plenty of variety to be had, but once the IR is loaded, there's only a limited amount of editing you can do without spoiling the natural sound. Usually you can apply EQ and also change the envelope of the reverb decay to make it shorter, and adding pre-delay is not a problem, but after that you pretty much have to take what you get. Some companies, such as Waves, have managed to create additional controls but, as a rule, the further you move from the original IR, the less natural the end result.

I'm going to break this review into pros and cons. Pros: Top notch wood, electronics, wonderful bound neck and great machine heads. The action/fretboard are wonderful (after being setup). Sounds beautiful!, and more so if you take my advice. One last pro, all of the cons are easily remedied. Cons: The saddle, nut, and bridge pins are plastic (kind of like putting crap tires on a good sports car). I replaced the saddle and nut with tusk, and for the bridge pins I went with brass. It was like the volume went from a 4 to a 8, and the tone went from nice to beautiful and singing. It was about a 40$ upgrade, that made it sound like a thousand dollar guitar. This is the first time I bought a guitar before playing it. The gamble more than paid off. Been playing guitar for 25 years, and I
Epiphone introduces the Les Paul Special VE (Vintage Edition) electric guitar featuring the classic Les Paul profile with a lightweight Poplar body. The Les Paul Special VE is powered by Epiphone Open Coil humbuckers and is available in beautiful “Vintage Worn” color finishes.For decades, the Les Paul Special has been one of Epiphone’s best se...  Click To Read More About This Product
The Takamine F-340 was the cause of a letter from Martin Guitars in the early 1980s because Takamine’s acoustic guitars including the logo design were supposedly nearly identical to Martin Models[citation needed]. According to Chris F. Martin IV, CEO of CF Martin and Company in a speech given to the Unofficial Martin Guitar Forum members on August 8, 2005, no lawsuit was ever actually filed, and Takamine did change the appearance of their guitars[citation needed].

By 1966 Daniel sold Danelectro to MCA, but remained with the company. In 1967 the Coral line of guitars is introduced. At the time, Danelectro sold about 85% of it's products to Sears. So MCA started the Coral line to sell to other distributors. The difference was the Coral hollow bodies (only) were manufactured in Japan. All other Coral parts were made in the New Jersey Danelectro plant. Also all Silvertones and Danelectro instruments were made entirely in the U.S.
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Main Spring Stopper Tremolo Block Stop Rod With the guitar tuned correctly, adjust the Main Spring make sure that the Stop Rod makes contact with the Tremolo Block and Stopper. If the Stop Rod does not make contact with the Tremolo Block and Stopper, adjust the Main Spring adjustment screw until contact is made.
Guitar amp and FX plug-ins are very advanced nowadays to the point that you can actually record “clean” by plugging your guitar straight into a mixer or interface, and add a plugin like Guitar Rig, Amplitube or Waves GTR as an insert. You will hear this effect as you play but without any risk of feedback, since no mics are live in the room. This approach also means you can tweak and change any aspect of the sound post-recording since the raw recording is actually completely dry.
I nearly returned this guitar when it first arrived. I'm very glad I changed my mind. When I first unboxed it I was not a fan of the sound at all, and I didn't think it could improve significantly, but I was wrong. I put my trusty Tone Rite on it and left it there for several days. It opened the sound up and made it project much better. The finish is great, and I love the dark sound of sapele. It just takes some time and playing to get it to open up. When I first picked it up, I much preferred the sound of my Seagull, but now the Martin is really speaking to me and the Seagull has been relegated to backup status. I've even picked up a couple of bluegrass tunes, just because I'm playing a Martin now. I've only plugged it in a couple of

Electric guitars and guitar equipment - want something new? Shop online and in-store for your new guitar setup. Pick from solid body, semi-acoustic, and hollow body styles to get your ideal electric guitar. We stock all the major guitar brands like Fender, Gibson, and Ibanez. Alongside electric guitars, you'll find amps and pedals from Marshall, Vox, and Orange.
The Vox T-60/AC-100 bass amplifier uses two 15-inch cabinets and thirty-to-forty watts of solid-state power using "germanium transistors".[5] The Sunn Model T was used by The Moody Blues, Kiss, Queen, The Who's John Entwistle and Rush's Geddy Lee.[5] The Sunn used a 150-watt amp with "four 12AX7WA tubes, followed by two 12AX7A tubes, and powered by four 6L6GC tubes".[6]
I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.
When technology changed from valve to solid-state, it was noticed that solid-state amplifiers lacked warmth and bass performance, and had to be twice as powerful as valve amplifiers, to sound as loud. Current Drive: Solid-state amplifiers behave in ‘Voltage Drive’. This acts as a short circuit (zero output impedance, or 100% damping factor) across the speakers, causing excessive damping, which reduces efficiency, limiting responsiveness. Valve amplifiers behave in ‘Current Drive’. This represents an open circuit across the speaker without over damping, allowing maximum response and efficiency.
Compression: A "limiter" is envisioned as a circuit which prevents the output signal from exceeding a certain limit. If it did this by clipping, it would cause distortion, but if it can do it cleanly by just progressively reducing the amplification of the incoming signal, then it may properly be called a compressor. A compressor reduces the overall dynamic range by "compressing" the gain of high amplitude signals while maintaining the design gain for lower amplitude signals.
Power attenuation[when defined as?] can be used with either low-power or high-power amplifiers, resulting in variable-power amplifiers. A high-power amplifier with power attenuation can produce power-tube distortion through a range of listening volumes, but with a decrease in high power distortion. Other technologies, such as dual rectifiers and the sag circuit[jargon]—which should not be confused with attenuation—allow high power amplifiers to produce low power volume while preserving high power distortion.[27]
This is because sound in an acoustic is dependent upon the bridge, saddle, and soundboard’s (top) ability to transfer string vibration through the sound hole of the body. The top (soundboard), back, and sides makes the body of the guitar where the sound hole is designed and cut. Knowing this, you’ll not only need wood that’s strong, but wood that can offer unique acoustic properties that emphasize its ability to project differing sounds at various frequencies. Of course, your choice of strings also lends to the harmonic ranges of a guitar.

In order to keep your guitar clean, there are some tips that you should be aware of. When taking the strings off to clean the system, do so two or three at a time. If you are not changing strings, wipe them with a dry cloth after every session. Wiping down the fretboard with a damp cloth occasionally is enough to keep it in good shape. The pickups, tuners, bridges, and nuts can be cleaned in much the same way. The pickups on your guitar should be cleaned with a dry cloth. Be sure to only use gentle cleaning products on your guitar.

Although the electric bass was invented in the 1930s by Paul Tutmarc, his new instrument did not sell well. It was not until Leo Fender developed the Fender Precision electric bass in 1950 that this new instrument took off in the marketplace. Unlike the upright bass, a solid-body electric bass does not produce acoustic sound from a hollow body; while an upright bass player often benefits from using a bass amp, a bass amp is a necessity for an electric bass player.
As much a sculptor as a guitarist, Pajo’s work in post-rock progenitors Slint was a frightening, seemingly rootless display of guitartistry that glided between extremes. Songs formed and dissolved without notice, turned inside out and back again, always at wildly unpredictable volumes. Pajo’s uncanny knack for both creating and shrinking spaces on tape would eventually become the blueprint for later luminaries like Tortoise, with whom he also played.
Boost effects are simple effects that increase overall volume. However, every boost pedal is very unique and often sounds different. It always comes down to the type of components the effects pedal manufacturer used to achieve the volume boost. Some boost pedals try to maintain the guitar tone while providing a volume boost, others can heavily affect the guitar tone while providing a volume boost. Oftentimes, guitarists will get a specific boost pedal and use it as an always-on effect because they like the way the boost pedal colors their tone.

Johnny Marr: I'd already played a couple of shows before that with a couple of bands. I'd been in a couple of bands before I met Andy, even though I was fourteen or fifteen at the time. We met in school, Andy and I. I'd been playing in these little kid's kinds of bands at twelve and thirteen. When I got to fourteen and fifteen, I got invited to play in a couple of bands with much older guys.

One of the tricky parts about teaching yourself to play is knowing what to focus on. As I said, I strongly encourage you to start by learning as many chords as possible because even tunefully outlining them through a progression will help you keep up in just about any setting. But that’s a pretty broad ask. This book is laser-focused on what modern guitarists need to know to best express themselves. Each of the 200 exercises comes with an audio track to help you learn how to listen, too. Though there are no shortcuts to greatness, consider this a quick-start guide that will help you know where to look. A fine complement to this might be Alexander’s The Practical Guide to Modern Music Theory for Guitarists, which takes a similar approach to learning the theory.
Two brands are synonymous with this type of instrument: Gibson and Fender.  Not only were they the earliest to bring the electric guitar to the masses, but the designs they created are still employed today, preferred by budding beginners and working professional musicians alike.  Other companies have made their mark in the market by creating variants on Gibson’s and Fender’s original designs, but they are still identified through the names that the originals were given.
The Ibanez DT-250 is a perfect guitar for shredding. The basswood is light so you can run all over the stage, jump off your stack, and still have energy to dive-bomb. Even do the splits. Notice that was a “you can.” These were outfitted with a pair of blade-pole V5 humbuckers, produced toward the end of Japanese-made pickups, before Ibanez started working with DiMarzio. They are smokin’ hot! This guitar almost leaps out of your hand when you plug it in. The Japanese improvements on the locking vibrato were also impressive, and this combines the precision of a Floyd Rose with the feather touch of a Kahler.

The palm mute is a playing technique for guitar and bass guitar, executed by placing the side of the picking hand below the little finger across the strings to be plucked, very close to the bridge, and then plucking the strings while the damping is in effect. This produces a muted sound. It was popularized by Black Sabbath in the song "Paranoid". - winner333
In the eighties, the Sonic Youth leader emerged as indie ­rock's premier guitar radical, mixing strange drone tunings, jamming screwdrivers or drumsticks under his strings, and blasting out feedback-swirled punk jams. Thurston Moore influenced a generation of noise­heads, from grunge rockers to shoegazers. Neil Young once said that if Sonic Youth wanted to record with him, "Hell, I'd be there."

You’ve decided to pick up an axe and learn to shred like one of the pros. While mastering the guitar is no easy feat itself, before you even start jamming you’ll probably find yourself looking through site after site trying to find the right instrument. It’s hard. There’s an expansive list of components to be taken into account: body styles, wood types, pickups, bridges, necks — and that’s just scratching at the surface.
In the ideal scenario, once set, your saddles should neither be flush down on the bridge assembly of the guitar, nor extended so high they could go no further. This saddle height relative to the bridge assembly is a reflection of the neck angle. If the saddles sit flush, the neck angle is not set back very far and vice-versa. This is where you should decide if your neck angle is in need of adjustment ( if you have a bolt-on neck). Check the measurement at the 12th fret then progress up the neck, measuring every couple of frets. The string height should continue to gradually rise, if it doesn't the neck is set back too far and has to be tilted up just a little. This is a very sensitive adjustment and the thickness of a couple sheets of paper can make a big difference. Some Fenders have a neck tilt adjustment screw that is accessed with an Allen wrench through a hole in the neck screw plate. The strings must be loosened, then the neck screws, then the tilt adjustment screw is tightened or loosened. Never do this when the neck screws are tight! If you don't have a tilt adjustment, thin shims of wood veneer are fitted in the neck pocket to adjust neck angle. Uneven frets are also a possibility. If , after having followed all the above steps, you are still getting fret buzz, you must establish that the frets are all even. But this leads us to fret dressing, which is another story altogether.
Automatic Track Creation & Loop Recording: A new layer (track) is created each time you start recording and each time a Riff loops. Stack layers on top of each other (bass, guitar, vocals) to create a Riff. Use looping to create multiple tracks, do multiple takes, etc. Each layer has controls for mixing and effects. (4 tracks with T4, 24 tracks with Standard)
Most users are happy with what they got for the money, from its wood quality, to the included hardware and electronics. As expected, many of its buyers are fans of the Les Paul Jr who want to try their hand at customizing their own straightforward rock machine. Surprisingly, there are some who are happy with its default configuration, including the feel of the neck, the sound of the P-90 pickup and the quality of the tuners.

Now I know the image above will give some people fits. Just the idea of doing a gig without your favorite amp roaring behind you is enough to send people to their sheds, grabbing pitchforks and lighting torches. This article is about why some guitarists choose to go direct at gigs. Going direct doesn’t replace the traditional guitar/pedals/amp formula that has powered popular music for over 60 years. Bass players and acoustic guitarists have gone direct for years, and technology is catching up to the ears of electric guitarists. Of course, no one is trying to tell every guitarist to do this, but it does seem to have merit in certain situations. Those situations are exactly what we will be talking about here. 
I have a problem with the way the neck bows going down from the low to high e strings. I have a Gibson les paul with the recent change in seasons I notice it on all my guitars I can adjust it out but it will some times just do the same thing, I see this on my fender and my Acoustic guitars as well when I adjust this I have a lot of problems with tuning I know this is not exactly what we were talking about but jut a question I wanted to ask I hope I made what I am saying plain enough I am pretty new to all of this. Thank you for all the great info.
Wah – This type of pedal was a Jimi Hendrix favorite, and you’ve probably heard the original “Cry Baby” in a lot of music. It was the first wah pedal to find success, and paved the way for others to follow. The Cry Baby is an example of manual wah, controlled by a rocker pedal that adjusts the level of treble response dynamically as you move it. Some modern wah pedals, by contrast, are “auto-wah effects,” which do the same thing but use presets for control instead of live input from your foot.
Barney Kessel, American jazz/blues guitarist/session musician prominent in the 1950s and 1960s. Kessel endorsed the Kay "Jazz Special", "Artist" and "Pro" guitars. As of 2016 the Barney Kessel name has been assigned exclusive manufacturing rights with the Kay Guitar Company. Kay is now reissuing the 1960s signature models (Barney Kessel Pro, Barney Kessel Artist, Barney Kessel Jazz Special). Contrary to some misleading stories, Barney Kessel often played Kay Guitars and can seen on video playing a Kay Jazz Special Guitar on the T.V. series Johnny Staccato, "Television’s Jazz Detective"
Last week we talked about choosing the right “Guitar Effects to Expand Your Sound” with sub-topics of “Guitar Effects Used By Your Favorite Pro Guitarists” and “Guitar Effects To Use For Each Music Genre”. Now that you’ve hopefully acquired some pedals of your own, there is another important topic that greatly influences the outcome of your tone – your pedalboard order.
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use a worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.[18]