Its simple yet effective design and revolutionary sound broke ground and set trends in electric guitar manufacturing and popular music. Introduced for national distribution as the Broadcaster in the autumn of 1950, it was the first guitar of its kind produced on a substantial scale. Its commercial production can be traced as far back as March 1950, when the single- and dual-pickup Esquire models were first sold. The Telecaster has been in continuous production in one form or another since its first incarnation.[1] The Fender Telecaster has been mostly used in music genres such as country and rock, but is also sometimes used in blues and jazz.
What we're looking at here is a standard Les Paul body made of mahogany and finished with an attractive vintage sunburst pattern. There's also a gorgeous heritage cherry sunburst and a straight ebony finish option as well. It features a pair of 700T humbuckers, one at the bridge and one at the neck position. These are pretty basic in nature, but their performance is more than good enough even for more experienced players and important recordings.
A rackmount effects unit may contain an electronic circuit nearly identical to a stompbox-based effect, but it is mounted in a standard 19" equipment rack, which is usually mounted in a road case that is designed to protect the equipment during transport. More recently, as signal-processing technology continuously becomes more feature-dense, rack-mount effects units frequently contain several types of effects. They are typically controlled by knobs or switches on the front panel, and often by a MIDI digital control interface.
The Effect:To this day, there are 3 main delay pedal types coexist, Tape is usually the most expensive and sough-after (especially Vintage releases) type as they provide very natural sound reproduction. Analog were modernized in the 70’s and they worked on electronics, with a minor drawback according to some as they store up to 3 seconds of Delay time. Digital pedals is the type met with most frequency on today’s market, offering longer-than-usual Delay times and pristine sound reproduction, these are usually your best pick. A lot of players know that they want a delay effect but have no idea from where to start, if you are one of them, try the Boss DD-7 Digital Delay Pedal The most basic and often met controls on Delay pedals are Time, Level and Feedback, you’ll sometimes find them labeled differently but with the same function and purpose.
The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
I have had some dog bad guitars! You and every one passes up Rickenbacker. I just dumped mine, I had two in my life they are bad out dated guitars. I saw people come in a store to buy one, they play one with a great Fender amp and walk out with some other brand. You do not see and of the greats play them. The sounds of the 60's is not a Ricky. Look for them and you will only see old photo of Lennon play one, no solos!
Every year we bring a new opening act on tour with us, and every year I have the harsh task of going on stage after some of the finest players in the business. This summer’s tour was no exception. With Montgomery Gentry in the support slot of the Toby Keith Biggest and Baddest tour, I had my work cut out for me. Two of the best axe slingers the music scene has to offer—Frank Bowers and Bo “two-timechampion” Garrett—have some of the greatest chops and sounds on the circuit today.
John McLaughlin was invited to record with Miles Davis while still in his twenties, co-parenting jazz fusion on Bitches Brew and other Davis LPs. But he achieved guitar-god status with his own Mahavishnu Orchestra, where he made his Gibson spit fire like a many-headed dragon. A breakneck stylist, McLaughlin was peerless, mixing psychedelic rock, R&B, gypsy jazz, flamenco and Indian raga techniques. That polyglot mastery earned him huge respect from jazz and rock peers alike: Jeff Beck called him "the best guitarist alive."
The Red Hot Chili Peppers always knew how to rock a party; it took John Frusciante to turn them into an arena-packing band with a sound they could call their own. Frusciante is a remarkably elastic stylist and a gifted sculptural arranger who pushed the Chilis to explore new worlds without getting in the way of their funk-pumped energy; he beefed up their sound with both well-placed fire (the volcanic, Hendrix-style solo on “Dani California”) and remarkable elegance (the indelible opening chords of “Under the Bridge”).
Proceed to the next two chords. The next chord you would play would be a power chord on the fifth fret of A three times. So you would play with your index finger on the fifth fret of A, your middle finger on the seventh fret of D, and your ring finger on the seventh fret of G. Then, simply shift this finger shape down one string so that your index finger is on the fifth fret of the E string with your other fingers on the seventh frets of the A and D strings. Play the chords in the sequence that they're highlighted with parentheses below:
Let’s take a closer look at what’s known as the switching matrix. A switch’s poles are like separate channels that aren’t connected until you add a jumper wire between them. A SPST or SPDT switch has only one of these channels, while a DPDT switch has two. Likewise, 3PDT and 4PDT switches have three and four channels, respectively. A switch’s throws are simply the different sides of a switch. For example, a DPDT on/on switch has two channels (poles) with three lugs on each channel. Engaging the switch turns on one side or the other. When one signal is turned on, the other is turned off.

This is the main component that separates acoustic guitars from electric guitars. A pickup senses the vibration from a string, transfers it to the guitar amplifier which then transfers it to the loudspeaker. There are many pickups but we’ll cover the four basic ones. The single coil pickup has a single coil of wire with two horseshoe-shaped magnets. They produce a bright, cutting sound and are quite noisy. The P90 pickup is a single coil pickup with one wide coil that increases the surface area of the strings, producing a bigger yet less bright sound. Humbucker pickups were designed with twin coils. They produce richer, warmer, more powerful sounds but roll back some higher frequency sound. Active-passive pickups use a battery-powered circuit to produce a powerful yet balanced tone across a range of frequencies. It outputs a balanced, clean tone.
I always say that Jose Feliciano? is indeed one of the greatest guitarists that’s ever lived. Flamenco, latin, bolero, classical, rock ect ect…. You name it and Jose can play it. Why he’s not on Rolling Stone’s 100 greatest guitarist of all time, is beyond anyone’s guess. dont believe me look up on youtube purple haze, the thrill is gone, flight of the bumble bee, Malagueña under Jose Feliciano. the guy can play anything and make it his own.

What can you expect from a shop whose exterior is painted in Eddie Van Halen stripes? Everything! Their selection of pedals was astounding. One of the largest selections I've come across in any store. I left having bought about a dozen things. Dangerous place! They are obviously a big dealer in PRS guitars because they had a nice selection of the USA made guitars. The Guitar Store represents Seattle right with an awesome staff and a vast selection of great guitars. With an ongoing series of in-store events and appearances by notable musicians, there is always a reason to stop in. Last year the shop hosted a monthly "build your own pedal" workshop--how cool is that?

The late ’36 Supro Amplifier was a spiffed-up version of the amp seen in the ’36 Bronson catalog, with a leatherette-type covering, leather handle, and enclosed, removable back. It now had an 8″ speaker, which spoke through a round grill with four bolts visible from the front. It’s impossible for me to tell from the illustration available to me, but this may still have had the resonator plate grill. The amp had four tubes and a “…special high fidelity circuit” that was “…rich in tone quality, and superfluous [sic!] in power.”

As we discussed in our post about cheap effects pedals, price does not always indicate quality. As with buying anything, simply picking out the most expensive item isn’t the way to ensure you get the best product for your needs. Sure, you might really want to own a Ferarri, but have you ever spent any time driving one around town to pick up your groceries? Fortunately, we live in an era of truly great, yet inexpensive, guitars. There are lower-priced riffs on old classics right alongside purpose-built value axes. You don’t have to settle for that rattling pawn shop special. With a few hundred dollars you can buy a guitar that will suit all your needs and last for many years to come.
The components are adequate. The electronics are good, have good tolerances, but the off board components are cheap and flimsy. The hardware is quite good, especially the enclosure. The PCB is well designed and well labeled. The big problem is that the layout instructions are quite poor and mislabeled in a number of places. There is no bill of materials so the components can be quite difficult to distinguish even when they're labeled. Additionally, product only includes one color of wire and does not include digital instructions as indicated in the product description.
OM-28: Similar to the 000-28 model in body size and ornamentation, but uses a 25.4″ scale, 1-2/4″ nut spacing, and 2-3/8″ string spacing at the bridge. Also known as the “orchestra” model, so named because of its association with banjo players transitioning to guitar in the late 1920s and early 1930s. The 14-fret neck-to-body design was designed to allow greater upper fret access, and thus feel more comfortable to banjo players accustomed to full acces the length of a 24-fret + neck.

This is my new, energetic positive corporate music track with confident bright mood, which contains happy optimistic piano and synth solo, driving electric guitars, drums and live bass. This track can be used as a motivational musical background for business websites, computer games, tv or radio jingles, advertising and commercial youtube video, etc. Enjoy!
What started as an aftermarket parts company has grown into a real giant. ESP is a brand that is currently building some of the best guitars in the mid range segment of the market. Even though they are often associated with metal scene, ESP offers a wide variety of models. In all honesty, you will rarely find the same bang for the buck that ESP is capable of delivering. On top of that, their guitars are good looking as well.
On the way folks arriving soon stay tuned pics of this made in Japan hand crafted beautiful Exotic Vintage Martin copy will be uploaded soon ... in great players condition original and stock Takamine pickup installed you can plug in at the strap pin jack and go electric and sounds amazing or fully acoustic of course unpluged. You know theses are know for the ultimate beauty of them as well as the Rich complex tone they offer well seasoned instrument of this caliber Japan had to offer in the Lawsuit series days 70-85 or so that have been discontinued decades ago as they say they don't make um like this any more... Stay tuned for another exotic Brazilian Rosewood guitar at any questions for Joe email:
Cole Clark guitars are made largely using Australian indigenous timbers. Solid timber is used in preference to plywood.[2] Clark’s discovery of the best type of wood for his guitars came whilst searching in Australia in 1998. He came across Bunya Pine, and found out that it had the perfect characteristics for the sound board on an acoustic guitar. Whilst researching this type of wood, Clark also discovered that Bunya is about 18% stronger than Spruce wood, which a traditional choice when constructing a guitar. Blackwood is also another favourite material of Cole Clark’s for building their guitars (
The Fender Mustang II V2 40w Guitar Amplifier Combo is an extremely versatile modelling amplifier that comes complete with 8 amp models, 37 effects, and 24 onboard factory and user presets. So, you’ve got a huge amount of different sounds to play with! It’s like having 18 amplifiers in one easy to carry box all pumping out through a powerful 1 x 12” fender Special Design speaker – great for gigs and studio use!
Stripped holes: small holes without much tension on them (i.e. pickguard screws) can be repaired with super glue (gel stuff). Put some glue in the hole and screw the screw in about 1/2 way. The glue will not stick to the plated screw, and will form threads. More severely stripped holes or holes w/ more tension on them (i.e. strap button screws) require pieces of toothpick be glued in w/ wood glue. Larger holes w/ alot of tension (i.e. neck mounting screws) require the hole be drilled out and a hardwood dowel glued in place.

Now, as others have mentioned, there is a switch that controls which pickup (or pickups plural) you want to use at any given moment. Seeing as each pickup is placed at a different point under the strings, the vibrations are slightly different. The closer the strings are to the bridge at the bottom, the more 'narrow' and intense the vibrations get. Thus the current generated from the magnets lead to different sound characteristics.
The new Martin electrics were offset double cutaway guitars which, in terms of shape, fall very loosely into a Stratocaster category. The cutaways are a bit wider and shallower than a Strat, both pointing away from the body. The horns are much more rounded than a Strat. Like a Strat, the waist is slightly offset, and the lower bout has a slightly asymmetrical slant to it. The bodies were initially built of hard maple and rosewood laminates that imitate the look of neck-through guitars popular at the time, but actually have neck pockets with glued-in mahogany necks. These had unbound 22-fret rosewood fingerboards, dot inlays and a distinctive three-and-three variation on the old Stauffer/Viennese headstock � which may have originally inspired Leo Fender’s Strat creation � with script CFM logo decal. (Prior to developing the Strat, Fender visited the Martin factory and was shown some of the old Stauffer/Martins with the round-hooked Eastern European headstock shape.) These all featured chrome Sperzel tuners, brass nuts, twin humbuckers, threeway selects, two volume and two tones with chrome dome knobs, and a Leo Quan Badass bridge.
Johnny Marr: I'd already played a couple of shows before that with a couple of bands. I'd been in a couple of bands before I met Andy, even though I was fourteen or fifteen at the time. We met in school, Andy and I. I'd been playing in these little kid's kinds of bands at twelve and thirteen. When I got to fourteen and fifteen, I got invited to play in a couple of bands with much older guys.

Straight away, we have to talk about how good this guitar sounds. Lots of low-end and mid-range acoustics tend to do one tonal area well, but the Martin DRS2 does an awesome job all round. It’s got deep, booming lows, while the highs remain nice and crisp. And of course, all of this is available acoustically or electrically in the dreadnought cutaway acousticelectric guitar.
This model offers the pretty standard budget Stratocaster experience, with the bright, open tone of alder as the body wood. It comes in two configurations, S-S-H and H-H, and given that the humbucker is the star, you might opt for the H-H version, especially because it comes with a coil tap. It’s a solid guitar and should give you everything you need for short money, minus the frustrations of a lot of cheap guitars out there. If you’re just starting out, you could also go cheaper with the PAC112J, but you have to give up the coil tap.
The key feature that makes the GT-1000 stand out from the crowd is the inclusion of the ingenious AIRD (Augmented Impulse Response Dynamics) technology which ensures your effects respond correctly with the likes of tube amps and don’t muddy your sound. You can read more about the AIRD technology here, but in a nutshell, it ensures the dynamics of your unique amp are preserved. With other multi effects, you might find have to turn your amp emulations off if you want your effects to respond correctly to YOUR amp, but with the GT-1000 you won’t have to do that as you can select which type of amp you’re playing with and the pedal will respond correctly.
The EM-18 came with either a pair of Mighty Mite humbuckers or a pair of DiMarzios. It was otherwise the same as the E-18 with the addition of a three-way mini-toggle coil selector switch which allowed a choice of both or either coil on the lead pickup. This arrangement allowed for a rather remarkable variety of tones, by the way. EM-18 production began in 1979 and some 1,375 were made until the guitar ended in February 1982.
This is a subsidiary guitar brand owned by Gibson. Epiphone makes the same models as Gibson - SGs, Les Pauls and what have you. The only real difference is the electrics, the circuitry, the wood and the finish, which to the normal eye/intermediate guitar player won't be able to tell apart from a Gibson. In fact, most of the musicians started out with an Epiphone because Gibsons are too expensive. John Lennon famously continued using Epiphone even after being able to buy Gibsons because he loved the imperfection of his Epiphone Casino.
Focus on the new chords you have learned and get physically used to changing between these and other chords you've learned in previous sessions. This is where you can use a metronome or backing drums to develop your rhythm and timing around these chord fingerings. Try and strum a simple sequence using these chords. Create a simple 3-4 chord song. This is about putting the theory you have learned into context.
 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.
What made him truly special was that, unlike other guitarists of his time who stuck to one style of playing, Jimi combined styles and used strumming alongside licks and other additions to create a fuller and more organic sound. Amazingly, he also used his thumb to do do a moving baseline whilst he was playing chords – he wanted to do what no other guitarists were doing, or were able to do and he succeeded. The way he dressed his chords with so many different sounds and rhythms just shows how naturally talented a guitarist Jimi Hendrix was. His guitar was like an extension of his body, a part of his left hand that had no boundaries.
Bell's journey to become a guitar master began with a car running over him as a child. He was an aspiring baseball player just shy of his 13 birthday and left with a fractured skull that ended his future career. So he picked up the guitar and fell in love. He's been building and repairing guitars since 1975. Today, he's running Bell's Custom Guitars on the side and repairing guitars at Murphy's Music in Irving.

In 1933, Dobro released an electric guitar and amp package. The combo amp had "two 8″ Lansing speakers and a five-tube chassis. Dobro made a two speaker combo amp that was on the market over 12 years before Fender launched its two-speaker "Dual Professional/Super" combo amp. In 1933, Audio-Vox was founded by Paul Tutmarc, the inventor of the first electric bass (Tutmarc's instrument did not achieve market success until Leo Fender's launched the Precision Bass). In 1933, Vega sold a "pickup and amplifier set" which a musician could use with her/his existing guitar. In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson developed prototype combo amps, but these never got produced and sold. By 1935, Electro/Rickenbacher sold "more amps and electric guitars than all the amps and electrified/electric guitars made from ’[19]28 through the end of ’[19]34, combined".[1]

Providing all of the necessary features expected in a quality electric guitar at a budget-friendly price, the Epiphone Les Paul Special II is perfect for those just beginning their musical journey or the seasoned guitarist looking for an everyday guitar for practice. The 650R humbucker pickups combined with the open coil design deliver strong and sustained tones. As seen on all Epiphone guitars, the Special II has over 500K potentiometer for both tone and volume, and a toggle selector with a 3-way pickup to focus in on the clarity of the sound and decreased excess humming. The body and neck are made with mahogany, while the fretboard has dot inlays within the rosewood design. String changing is also made easier due to the stopbar tailpiece, which helps to add more sustain in sound when combined with the LockTone Tune-O-Matic bridge. With all of these features at such a reasonable price point, the Epiphone Les Paul Special II is a strong contender included on this list.

Budget, feel and sound! Don't worry about who plays what or brand names. NONE of that matters if the guitar does not FEEL good to you and have the SOUND that you are looking for. Of course, most people have a budget and there is no need in trying $2000 guitars if you can't afford one, except for expanding your education about different types of guitar.

{"reportSuiteIds":"guitarcenterprod","pageName":"[gc] services:repairs","prop2":"[gc] services:repairs","prop1":"[gc] services","prop5":"[gc] services:repairs","prop6":"[gc] services:repairs","prop3":"[gc] services:repairs","evar51":"default: united states","prop4":"[gc] services:repairs","channel":"[gc] services","linkInternalFilters":"javascript:,","prop7":"[gc] services"}
Route the body. You’ll need to make a cavity (a hole that goes partly through the body of the guitar) in the back of the guitar to fit the electronics for the volume, tone, pickup selection controls. You will cover it later with a bit of material (usually hard plastic). You’ll also need one cavity in the front of the guitar for each of its pickups. Rout the pickup cavity (or cavities) to the depth recommended by the manufacturer.[9]
This is my new, energetic positive corporate music track with confident bright mood, which contains happy optimistic piano and synth solo, driving electric guitars, drums and live bass. This track can be used as a motivational musical background for business websites, computer games, tv or radio jingles, advertising and commercial youtube video, etc. Enjoy!
On the same topic, if you do apply some compression during recording, be careful not to overdo it. At this stage, you don’t need to hear any effect, it should just transparently control peaks. If you apply the amount of squeeze that may be needed for the mix as the part is going down, it might cramp the player’s style—better to leave that for later. Plus, if the signal is over-compressed here, it may bring out the normal squeaks and finger & fret noises so much that it becomes difficult to eliminate them later—this is especially true if the player is really a guitarist who also moonlights on bass. Guitarists who try their hand at bass parts often haven’t mastered an experienced bassist’s technique for damping the strings, and the little playing noises I referred to, as well as distracting undamped harmonics, can end up overpowering the recording if heavy limiting/compression brings them up (I recently struggled mightily to deal with a bass track that suffered from this flaw).
Though pitch-shifting is an effect, it is easier to control when used via an insert point. However, if you need to use the effect on several tracks in varying amounts, you can use it via a send/return loop, providing the shifter is set to 100 percent wet. That way, you can adjust the effects depth for individual mix channels by using the send control feeding the pitch-shifter.
I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...
{ "thumbImageID": "Modern-Player-Telecaster-Plus-Electric-Guitar-Honey-Burst-Maple-Fretboard/H76265000002001", "defaultDisplayName": "Fender Modern Player Telecaster Plus Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Honey Burst Maple Fretboard", "sku": "sku:site51309565842071", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Modern-Player-Telecaster-Plus-Electric-Guitar-Honey-Burst-Maple-Fretboard-1309565842071.gc", "skuImageId": "Modern-Player-Telecaster-Plus-Electric-Guitar-Honey-Burst-Maple-Fretboard/H76265000002001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Charcoal Maple Fretboard", "sku": "sku:site51309565842056", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Modern-Player-Telecaster-Plus-Electric-Guitar-Transparent-Charcoal-Maple-Fretboard-1309565842056.gc", "skuImageId": "Modern-Player-Telecaster-Plus-Electric-Guitar-Transparent-Charcoal-Maple-Fretboard/H76265000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
There are many excellent pedals out there, I especially like the ones that contain multiple reverbs like, plate, spring, hall, church, etc. Reverb can be a great subtle effect adding a slight bit of ambience to your guitar sound. This is especially nice when playing in small or dry rooms. Usually the larger the room, the less reverb you may want as the room produces its own reverb, which is exactly what we are trying to create with the effect! One of my favorite reverb tones is the old surf guitar sounds made famous by Dick Dale and the Ventures.
SPEAKER-LANEY-LA30Stock Code: 558568Guitar Amp Items Available: 1Stock ID: 558568Available at Cash Converters Pinetown only. Subject to availability.Please visit the store to view and purchase the product.Cellphone number 083 459 1248 (Whatsapp) Telephone number 031 701 9017 - speak to JennyBuy with confidence -This product is covered by the Cash Converters guarantee.Faulty goods returned within 6 ...
A real hall-of-famer from Ibanez, which displays true rock style and lightning-fast playability in an affordable beginner-friendly package. With the classic Superstrat body in a range of colors, this RG is made of solid basswood and features a slick, thin Wizard III maple neck, with rosewood fretboard and 24 jumbo frets, making it superb for chugging powerchords and fast soloing.

The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.
Ibanez is a Japanese guitar brand, which is established in the year 1957. They provide Acoustic, Bass Guitars and Semi-Acoustic Guitars at different price segments. The company is owned by Hoshino Gakki. Their headquarters located in Nagoya, Aichi, Japan. They also manufacture amplifiers, mandolins and effect units. They become one of the top ten best guitar brands in India. The price range starts from Rs. 13,299/- onwards (approx). For further details, visit
Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.

Maton Guitars - Australia's leading manufacturer of Acoustic and Acoustic / Electric Guitars. Until the late 1930's the Australian guitar manufacturing industry was virtually non existent and good quality guitars were hard to find. The best guitars, it was well understood, came from the U.S.A. Bill May, a Melbourne born jazz musician, woodwork teacher, and luthier, decided to change all that.
Route the body. You’ll need to make a cavity (a hole that goes partly through the body of the guitar) in the back of the guitar to fit the electronics for the volume, tone, pickup selection controls. You will cover it later with a bit of material (usually hard plastic). You’ll also need one cavity in the front of the guitar for each of its pickups. Rout the pickup cavity (or cavities) to the depth recommended by the manufacturer.[9]
I've had it for a few months and have been using it at shows. It has become erratic. The patch I use most often occasionally oscillates. It's like microphonic feedback (not guitar sustaining feedback). The output level seems to change on it's own as well. I will say I found an amazing sound with the marshall 800 emulation but the inconsistency makes it unusable live. It is possible it's not the unit but a power supply problem or connection, but I have not seem the power go off and other devices on the same power supply work fine. I have ordered the digitech 360xp since I had used that brand for 15 years or more with no issue.

Spruce has historically been the wood of choice for acoustic flat-top guitar soundboards. However, Luthiers and other large guitar manufacturers very often choose more economical and readily available woods rather than top-quality spruce. Redwoods and cedar, for instance, are often used in soundboards by American guitar-makers to great effect. In some cases, two different woods are used together to give the guitar a distinctive appearance and tone.

Very well cared for electric guitar.  Very light with a good tone provided by the maple neck and mahogany body. The S520EX features a thin, sculpted mahogany body bolted to a maple Wizard II neck with a 22-fret rosewood fingerboard with binding and claw scratch inlays only at the twelfth fret. Components include a pair of Ibanez Infinity covered humbucking pickups and a ZR ball-bearing pivot double locking tremolo bridge with a ZPS2 tuning stabilizer.
Unlike acoustic guitars, solid-body electric guitars have no vibrating soundboard to amplify string vibration. Instead, solid-body instruments depend on electric pickups and an amplifier (or amp) and speaker. The solid body ensures that the amplified sound reproduces the string vibration alone, thus avoiding the wolf tones and unwanted feedback associated with amplified acoustic guitars. These guitars are generally made of hardwood covered with a hard polymer finish, often polyester or lacquer. In large production facilities, the wood is stored for three to six months in a wood-drying kiln before being cut to shape. Premium custom-built guitars are frequently made with much older, hand-selected wood.

Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too. 
This happens when discussing variables within a number of different art forms—you simply can’t rely on scientific equipment to make some assessments. You can’t trust the gadgets; instead, you have to rely on your ears. Even relying on your ears can be difficult because it is, once again, a subjective discussion. “We don’t hear what’s out there,” Millard says. “We hear what we think we hear. It’s the psychological or neurological way we hear. To think we hear what sound is out there is so naïve and so wrong.” Trustworthiness aside, this brings us to another concept that pops up frequently when discussing the nature of tone: the role of good old fashioned, organic, human beings.
If you have any comments about what you see in this web site,  we would love to hear from you.  Our E-Mail address is below.  Of course we are particularly anxious to talk to you about our repair services or our handcrafted guitars.  But  --  don't let that limit you.  We would love to hear your ideas about any guitar related topic.  (One such e-mail led to the harp guitar project)   We WILL respond, generally quite soon.    If you have a question that you would like to see addressed in our Q& A page, let us know.  Our E-Mail Address is:
For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound. 
DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
Founded in 1902, Gibson began life producing mandolins and other instruments, before making hollow-body electric guitars in the thirties. Their first solid-body guitar came in 1952 – the Les Paul, which remains one of the most iconic guitars in the world. They are also well known for pioneering some classic guitar shapes such as the SG, the Explorer, and the Flying V. Used by everyone from James Hetfield to B.B. King, Gibson’s are manufactured in three American factories – two in Tennessee and one in Montana.
If you decide to use my link to Guitar Tricks when you sign up as a member, I will receive a compensation for my referral. I am not a professional reviewer and my views are biased because I only recommend stuff that I use and like. I appreciate if you follow my links to Guitar Tricks if you like I Really Like Guitars and my review of Guitar Tricks. Thank you!
My first guitar was a fender knockoff. My first professional guitar was a Gibson LP custom. I like the richer tone of the Gibson for ballads, folk and country and the Fender gives you the edge you need for rock, garage and loud stuff. Foot pedals get the sounds you need for just about any style of music with either brand. The fender neck is a bit easier to move over because it is thin and fat-fingered guys like me need a bit of help that way. The Gibson reminds me more of my acoustic guitars. Strings are an important selection for any guitar to be comfortable and get the right sound.
Generic PC audio cards often don’t have ASIO drivers. However, there is a freeware thing called ASIO4ALL - Universal ASIO Driver that can turn some of the low-level game friendly Windows audio interfaces (WDM streaming) into an ASIO driver, which is better than nothing. So if you’re going to start with your guitar going direct to the PC sound card, get this next.

Overdrive distortion is the most well known of all distortions. Although there aren't many electronic differences between a distortion an overdrive, the main audible one is that a distortion does exactly as the name suggests; distorts and clips the signal no matter what volume is going through it, the amount of distortion usually remains relatively the same. This is where an overdrive differs. Most overdrives are built to emulate the sound of a tube amp overdriving and therefore give the player control of the clipping through dynamics. This simply means that the effect gives a clean sound for quieter volumes and a more clipped or distorted sound for louder volumes.

A: If it looks like a ??? it almost certainly is a ??? Because the factory used to change the hardware at a whim there will be slight variations. This has, in most cases, nothing to do with a particular year but more to do with what happened to be to hand at the time. Some exceptions are pickups, pickguards, logos and headstocks. All I know is here on the website if you look hard enough. Also bear in mind that your guitar may have been modified at some stage in its life.
Typically, guitar amplifiers have two amplifying circuit stages and in addition frequently have tone-shaping electric circuits, which usually include at least bass and treble controls, which function similarly to the equivalent controls on a home hi-fi system. More expensive amplifiers typically have more controls for other frequency ranges, such as one or two "midrange" controls and a "presence" control for high frequencies. Some guitar amplifiers have a graphic equalizer, which uses vertical faders to control multiple frequency bands. Some more expensive bass amps have a parametric equalizer, which enables precise control of tone.
The specifications of the neck and string setup dictate the guitar's overall playability. As such, it is important to get a handle of important specs which include scale length (the length by which the string is stretched from the bridge saddle to the nut), nut width, fingerboard radius, and neck profile (shape of the back of the neck). Beginners normally want guitars to play easier, and will prefer those with shorter scale length, thin nut width and neck profile, and flatter fingerboard radius. On the other hand, experienced players will have grown accustomed to a specific neck configuration, if this is your case, you will want your new guitar to have similar specs to what you already like.
How are acoustic guitars and electric guitars different? Several ways. Most notably, acoustics don’t need to be plugged in to be heard. Acoustic guitars are generally larger and have a hollow sound chamber. This sound chamber "magnifies" the resonance of the guitar’s wooden top and body as you pluck or strum the strings. The bridge helps transmit the strings’ vibrations to the body.
Just knowing three chords will enable you to play all of these, albeit sometimes in a key that doesn't suit the song too well. As Rockin Cowboy illustrates, chords come in 'families', so if you understand that, songs become far more predictable. Sometimes I play with others, and when they try to explain that this new song 'has G, C and D in it', all I need to know is the key - in this case, G. The other two chords are virtually inevitable, but that fact seems to have escaped them!
No matter how good a tech may be, his preferences are going to be different than yours on string height, etc. And he is never going to use the exact same amount of pressure fretting a note as you do (affects intonation adjustments). So, the best you can hope for is finding a good tech with good comunication skills, willing to listen to what you want. I'll admit I've never tried to find one, but that sounds more difficult than learning to do the setups yourself, which is what I did.
The playing of conventional chords is simplified by open tunings, which are especially popular in folk, blues guitar and non-Spanish classical guitar (such as English and Russian guitar). For example, the typical twelve-bar blues uses only three chords, each of which can be played (in every open tuning) by fretting six-strings with one finger. Open tunings are used especially for steel guitar and slide guitar. Open tunings allow one-finger chords to be played with greater consonance than do other tunings, which use equal temperament, at the cost of increasing the dissonance in other chords.
Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.
As a beginner, it is best to avoid making a pawn shop, flea market, or yard sale purchase unless you are shopping with somebody who has experience in purchasing a guitar. Having never purchased a guitar, you may not know what to look for in terms of damage or guitar quality. With that being said, a local music retail shop is your best bet. You may also shop online with a reputable company, although be sure to review the business’ return policy.
But there were already hints of the change to come, of the evolutions in music technology that would eventually compete with the guitar. In 1979, Tascam’s Portastudio 144 arrived on the market, allowing anybody with a microphone and a patch cord to record with multiple tracks. (Bruce Springsteen used a Portastudio for 1982’s “Nebraska.”) In 1981, Oberheim introduced the DMX drum machine, revolutionizing hip-hop.
Depending on your choice of guitar kit you may be required to perform a small amount (or a large amount) of work wiring the guitar. This typically involves a soldering iron and a basic understanding of guitar electronics. You will also need to be able to follow schematic diagrams of pickup configurations. It’s not a one size fits all job either, wiring up a Telecaster is different to wiring a Stratocaster and a Les Paul or hollow body is different again.

I think for somebody reasonable, the right answer would be that yes, it has an effect on the tone of the guitar and the notes coming off the strings, but not nearly as much as other factors in the design of the guitar. If you think I'm wrong then you should read more about the overtone series, the physics of sound, difference tones, and how sounds interact both as vibrations moving through air, and digitally as numbers in a computer. It's just not as simple as to say wood doesn't have a magnetic field so therefore it can't possibly affect the tone. It's true that much of what we hear is a result of the ear-brain axis, but there are also many fundamentally measurable physical properties of sound as it occurs over time (as all sounds do) that can easily explain why different types or shapes of wood could have a subtle but real effect on the tone.

Believe it or not, Eddie Van Halen hadn’t even heard rock music until he and his family moved from the Netherlands to Pasadena California in 1967. After hearing Cream, he quickly abandoned piano and drums for the guitar, learning the instrument by picking licks off records by Eric Clapton, Led Zeppelin, Jimi Hendrix and Jeff Beck. These influences were merely a springboard, though. Eddie was quickly able to put his own mark on everything he played.

Launched in the late 1990s the SE models are manufactured in South Korea by a third-party company (World Musical Instruments) then shipped to re-sellers and dealers in the United States. This is a major part of the cost-cutting technique, in addition to a more flat (as opposed to carved) body shape and cheaper pickups/electronics. So be advised, I’m not telling you that you’re getting a $2000 guitar for $600.
{ "thumbImageID": "Limited-Edition-Wildkat-Studio-Electric-Guitar-Antique-Natural/J24175000002000", "defaultDisplayName": "Epiphone Limited Edition Wildkat Studio Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Wine Red", "sku": "sku:site51433169999736", "price": "399.00", "regularPrice": "399.00", "msrpPrice": "599.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Wildkat-Studio-Electric-Guitar-Wine-Red-1433169999736.gc", "skuImageId": "Limited-Edition-Wildkat-Studio-Electric-Guitar-Wine-Red/J24175000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Metallic Gold", "sku": "sku:site51433169999813", "price": "399.00", "regularPrice": "399.00", "msrpPrice": "599.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Wildkat-Studio-Electric-Guitar-Metallic-Gold-1433169999813.gc", "skuImageId": "Limited-Edition-Wildkat-Studio-Electric-Guitar-Metallic-Gold/J24175000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Natural", "sku": "sku:site51433169999695", "price": "299.99", "regularPrice": "399.00", "msrpPrice": "599.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Wildkat-Studio-Electric-Guitar-Antique-Natural-1433169999695.gc", "skuImageId": "Limited-Edition-Wildkat-Studio-Electric-Guitar-Antique-Natural/J24175000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
GUITAR RIG 5 PLAYER is the free, modular and expandable effects processor from Native Instruments, combining creative effects routing possibilities with ease-of-use and pristine sound quality. The included FACTORY SELECTION library provides one stunning amp with 17 cabinet emulations, plus 13 effects and sound modifiers to shape and enhance any audio signal.

Super nice !.... Beautiful Patina exceptional Booming sound much like the old Martin 000 or old Gibson for that matter for a fraction $ and this ONE is a really good one folks. These are a well kept secret sort of ... known for their GREAT rich mature sound. This example is in fine all-round Original condition without any of the over 60 group problematic issues- none found anywhere upon close examination, no NONE nada -- neck issues -frets ARE good - tuners ARE good - bridge IS good - Solid Top is without a crack it s wood is FREE of cracks, Back is OK no buckle rash , no buldge to its Spruce top, The bridge is tight and NEW MARTIN STRINGS and just JVGuitars Set up this baby plays and sounds amazing at this price point unbelievable! Made in Japan quality with a beautifully grained high grade Mahogany medium soft V NECK feels like an old Martin too ....looks at the neck grain they used a beautiful Honduran mahogany not African or other this one is cool See the Pics of that ...its original Tortious pickguard is nice too..... nearly 40 years old its amazing but she's not new or mint of course she has a few minor doinks and plenty of that natural vintage patina and such but overall she's JVG condition rated at vintage excellent used condition rated. She Plays with easily and will bring a warm smile to your face when playing GREAT TONE fingerpicking rich and punchy its a very fun guitar to play... she's over 45 years old and in this kind of condition..... you better snap this gem up before she's gone or I change my mine and keep her for myself...haha this is my business I need to sell but you get my point its a good one folks. This is one amongst several of the FG150's Red Label Nippon Gakki's we have and I call it ( # 3 ) Contact Joe by email to BUY it:
John Mayer and Frusciante are very talented guitarists, but to include them at the expense of legends like Clapton, Duane Allman, Neil Young, The Edge, Brian May, George Harrison…that's unforgivable. I'll admit that Jack White needs more time to prove himself too, but of all the recent guitarists listed, he is the one with the most vision and confidence in his ideas. He is his generation's Jimmy Page.
Pickup selectors can wear out over time. The lugs and the rotating switch can loose their tight connect with years of use. Also, many inexpensive guitars made today use cheap electronic parts. You may just want to upgrade your switch for more control and better selections. It is fairly easy to install a new pickup selector. Here are a few simple steps to replacing your pickup selector.
Epiphone's offering in the low and mid-range segment has been pretty strong for years. The Epiphone Hummingbird Pro is their take on a legendary Gibson model and it brings much of the same qualities. What really makes this acoustic-electric stand out is the overall level of quality you get for your money. You can trust it as an accurate emulation since Gibson now owns and produces Epiphone's guitars.
With the new Shreddage 2X update released in July 2014, S2 is better than ever. Enjoy a brand-new user interface and totally rewritten engine, with intelligent string / fret selection, new features and options, even more customizable mapping, and new samples like powerchord slides and staccatos. You can also use new built-in effects pedals and save/load your own custom presets to use across multiple projects.

It also has an overwhelming amount of sheet music in it. These music sheets allow you to practice what is being taught in the given chapter, which is nice, but going through the books, I felt there was a lot left unexplained. This was probably a result of them trying to simplify things as much as possible, but this actually leaves holes in the padawan guitarist's knowledge.

Definitely agree that Fender should be number one. Marshall is over rated, and fender brings the tone way better then a Marshall hands down. Marshall makes you pay for their name, fender only charges you for the amp components and the time tested fender quality. Why do you think so many amp companies try to replicate the fender tone?... Because its awesome and blows peoples minds!
Why We Liked It - The Martin DRS2 will take some beating as one of the all-round best electric acoustics you can buy, simply because you’re getting the finish and tonal quality of a much more expensive guitar for a solid price. Whether you’re mainly looking for a traditional acoustic you can occasionally amplify, or you need something professional grade for gigs, this could be it. In terms of recording your guitar, you can mics for guitars or a microphone for the guitar amp. If you're looking for an alternative, check out the Martin Road Series DRS1 Dreadnought.
Near the beginning of Epiphone's thinline semi-acoustic range is 'The Dot', based on the timeless and legendary Gibson ES-335. The Dot feels comfortable to hold and play, and the neck, while by no means clubby, feels substantial in your palm, probably due to the 43mm width at the nut. Its slightly flattened C-profile increases marginally in depth further up the neck, making for a suitably vintage feel. An acoustic strum issues forth a pleasing, resonant ring. We'd wager that the Dot's all-maple construction has got something to do with that, but more obviously, the hollow bouts bolster the acoustic tone, inducing wry smiles to those listening. Before plugging in, listen to Ronny Jordan, then Noel Gallagher, then BB King, then George Harrison and John Lennon. It becomes immediately apparent that this style of guitar is hugely versatile. This Dot is no exception: the pickups, while not packing the punch of USA PAFs, offer everything form smooth and moody, front-position mellowness to screeching, bridge position rawk. It's one of the best electric guitars for jazz at this price point, too. The Dot looks fine, sounds great and plays great. To our minds, that's value for money indeed.
Music Theory for Guitarists by Tom Kolb is one of the most comprehensive ways to learn music theory from a book that we can recommend. This book, and the combination of online audio that accompanies it, has helped many aspiring guitarists learn theory after being frustrated with trying to learn how to play the guitar. One reason that might be is because Tom uses very plain language to explain theoretical concepts that are often confusing and can come off as complex. Further, the book includes diagrams frequently, which really helps visual learners.
Here’s the thing about acoustic guitars: those that use solid wood command a higher price than those that use laminates for their soundboard. Acoustic guitars that have a solid top are more sturdy and sound better as the wood matures. This is why solid wood models are usually more expensive, and also why they come highly recommended if you want to make a really good investment.
He’s sauntered down through the decades unfazed by stints in jail and hospital, heroin addiction, assorted femmes fatales, copious boozing, rampaging Hells Angels and assaults from fellow icons like Chuck Berry and Peter Tosh. Unconstrained by the grinding gradations of clock, calendar, public morality or legal prohibition, he has defined life on his own terms.
I just purchased a Lyle acoustic guitar in excellent condition. It's Serial # 204 and Model # 712. The top of the guitar says Lyle with a gold cross-like design up by the tuning keys. It looks like it was painted on the wood by the manufacture. The top tuning key head and neck are the color of milk chocolate with pearl-type fret inlays. The body of the guitar is a light tangerine color showing the natural wood grain under the clear lacquer finish. It has a dark chocolate bridge, and a black pick guard with a white pearl engraved inlay of a floral sprig or vine-type design. There is a set of three circles around the center opening (1 thin black line, a wide band of black and white lines and another thin black line. It has light tangerine and milk to dark chocolate stripped sides and back which is the natural wood grain showing through the clear lacquer finish. JAPAN is engraved on the back of the tuning key head in back.
{ "siteName" : "/m123", "sourceCodeId" : "61001563", "sourceName" : "DIRECTLOADFORM123", "sourceSegment" : "direct", "richRelevanceMode":"render", "richRelevanceApiKey":"413c08763c06fde6", "richRelevanceUserId":"", "richRelevanceSessionId":"a9438a874b3f643826015539d38d85fe", "rrBaseUrl":"//", "rrChannelId":"-", "rrMobileChannelId":"586e31c42963afdf", "hashedUserIdForCriteo":"", "rrTimeout":"10000", "rrLoadAtgRecs":"false", "contextPath" : "", "JSESSIONID":"9qYR4FK6oBJZ-PTPDs-s9v33.mfbot04", "unicaEnv" : "site-devint", "staticContentUrl" : "", "styleStaticContentUrl" : "", "staticVersion" : "ecmd-2018.10.2-0g&cb=3", "versionParam" : "?vId=ecmd-2018.10.2-0g&cb=3", "customerService" : "888-566-6123", "profileID" : "6031423577", "powerReviewsUrl" : "", "contentKey": "site7AV", "isInternational": "false", "isWarrantyShippable": "true", "currencySymbol": "$", "profileCountryCode": "US", "profileCurrencyCode": "USD", "welcomeMat" : "false" } Skip to main content Skip to footer {"eVar4":"shop by department: guitars","eVar5":"shop by department: guitars: guitar value packages","pageName":"[m123] shop by department: guitars: guitar value packages","reportSuiteIds":"music123prod","eVar3":"shop by department","prop2":"[m123] shop by department: guitars: guitar value packages","prop1":"[m123] shop by department: guitars","prop10":"category","prop11":"guitar value packages","prop5":"[m123] shop by department: guitars: guitar value packages","prop6":"[m123] shop by department: guitars: guitar value packages","prop3":"[m123] shop by department: guitars: guitar value packages","prop4":"[m123] shop by department: guitars: guitar value packages","channel":"[m123] shop by department","linkInternalFilters":"javascript:,","prop7":"[m123] sub category"} false
The Blues Junior's compact dimensions, light weight and pedal-friendly credentials have made it one of the most popular gigging combos in the world, but for 2018, Fender has updated it to the new Mark IV specification, which features various tweaks, including Celestion’s excellent A-Type loudspeaker. Controls include gain, bass treble and middle, reverb level and master volume, with a small push-button ‘Fat’ switch. In use, the Junior unleashes a stunning range of Fender tones, from spanky, sparkling cleans, to fat and smooth midrange crunch that’s spot on for blues and classic rock. The Fat switch adds a generous midrange boost and can be remote-controlled from a footswitch for greater versatility, while the improved reverb circuit is very impressive, with no noise and a smooth, warm delay that feels more integral to the overall amp tone, harking back to the best blackface reverbs of the 1960s. No matter what guitar you use, the Blues Junior flatters single coils and humbuckers alike, not to mention drive pedals with plenty of volume. The sounds are top-drawer, comparing well against many so-called boutique amps costing four times the price. Factor in the compact dimensions and light weight, and it’s easy to see why the Blues Junior remains a firm favourite.

The Ibanez DT-250 is a perfect guitar for shredding. The basswood is light so you can run all over the stage, jump off your stack, and still have energy to dive-bomb. Even do the splits. Notice that was a “you can.” These were outfitted with a pair of blade-pole V5 humbuckers, produced toward the end of Japanese-made pickups, before Ibanez started working with DiMarzio. They are smokin’ hot! This guitar almost leaps out of your hand when you plug it in. The Japanese improvements on the locking vibrato were also impressive, and this combines the precision of a Floyd Rose with the feather touch of a Kahler.

Part of their Espana series, the Cordoba 45MR is handsome, handmade in Spain, and brings all the character of Spanish guitar music to the player, starting with the idea of using the guitars of the 1880s and 1890s as a model for the appearance and sound. Nylon-string guitars themselves came from Spain, so this is perfect for the player who wants as much connection to tradition and authenticity as possible.
The main advantage of the Rocktron Velocity V10 is the low price tag. It is one of the better values for beginner guitar amps out there. There is nothing particularly amazing about the Velocity V10 in its own right, but it can potentially cost less than half as much as some other beginner level amps. The Velocity V10 is capable enough to be a solid practice amp with a price that almost nothing of similar quality can match. It is a good budget option that delivers on all the actually necessary features.
Here we SOLD OUT: a real nice vintage 1986 Japanese crafted Ibanez LS-300 this is a unique classic series of hand built quality guitars made for a short era in limited quantities is a wonderful example of very good Japanese quality workmanship that were built with good quality materials these have stood the test of time ... post lawsuit era. This full size Dred has a classic sound and has quite nice articulate tone notes ring true & clear. This Mahogany neck is quite nice it has good and low finger play Action and has room to go either way with truss rod not maxed out at all , room to adjust to taste either way...body back & sides are also mahogany with some slight buckle mars on back but not to came in with fingerboard grime and a broken nut and old rotten strings so we started from scratch & cleaned & re-hydrated the woods especially the rosewood fingerboard was soaked and cleaned with lemon oil I just polished the frets most are showing little to no where and a few lower frets were polished down further leaving only slight signs of past play not taking hardly any off vintage frets and left its original integrity in tact, NECK WIDTH IS its 1-11/16ths nut width medium slim profile neck is very good its easy to play set up nicely...I did replace its nut with a compensated Martin bone nut and installed new strings....while doing this observing closely its overall condition to be excellent ....its top is nice and flat its made of beautiful straight grained Sitka spruce with some nice visible bear claw figure to it the Spruce is Solid it is center seamed 2 - piece, bridge is flat too with no cracks...x bracing is also cracks or separations, neck is straight to this day this is a great player folks...this tone is great for recording. Its noticeably fast pro feeling neck makes this one a pleasure to play. These pics were before new strings and clean & set up with new martin bone nut its even more beautiful now. any questions let me know thanks for your interest Joe, You can email me at:
Fender was started by Leo Fender in 1946 in Fullerton, CA. Leo Fender sold his company to CBS in 1965. In 1985 Fender employees purchased the company. Leo Fender founded Music Man in 1975, and later founded the G&L Musical Instruments company. Fender brands currently include brands include Fender®, Squier®, Guild®, Gretsch®, Jackson®, Charvel®, EVH®, Tacoma…
i'll be 50 yrs old in a few days. i started playing guitar at 8. this is my 30th guitar. i started ordering various guitars from amazon a year and a half ago and have not been displeased at all with any of my orders. i get some for young people who cannot afford to get one for themselves and so have started exploring the guitars in the price range of 80 to 140 dollars. at first glance, it would seem pretty much impossible for any guitars in this price range to be of any worth, but the factories are set up to put out fine instruments now in this price range. i can't recommend this guitar highly enough to convince you what i think of it but i am astounded at the quality, playability and sound of this guitar. it has really good tuners and rings out like a
For solidbodies there is usually a one- or two-letter prefix indicating the body style or general model. This is followed by a dash and a number which usually indicates the number of pickups (e.g., J-1), although on occasion the number indicates the year of introduction (e.g., TG-54). Guitars bearing a vibrato usually appended an “L” after the pickup number (e.g., MJ-2L).

Basswood comes from Linden trees, and it is soft and easy to work with. A side effect of being soft is that it also dents easy. Because it doesn’t have much of a grain or color, it’s most commonly used on instruments that have an opaque paint-job, though this isn’t always the case (as in the photo above). Basswood has a warm, balanced sound with great mid range and good sustain.

The solid body electric guitar was a major design advance introduced by Leo Fender in the early 1950s. The solid body guitar helped remedy the feedback problems of hollowbody instruments. They were also easier to make, which led to mass market production. Fender introduced the iconic Telecaster and Stratocaster. Soon Gibson also introduced their first electric guitars in a partnership with Les Paul to produce what would become the equally iconic Gibson Les Paul.

The Marine Band Thunderbird is a model of low and super-low pitched 10-hole diatonic harmonica that was introduced in 2011. It possesses a bamboo comb like the Crossover, and a conical shaped lower cover plate. Designed by noted harmonica player and customizer Joe Filisko, this plate helps reduce any rattle caused by the low frequency tone produced by the reeds. It is available in low major keys A through F, as well as low B-flat and E-flat, and double-low F.[14]
To make frequency selective networks, we must use capacitors and/or inductors. Unlike resistors, both caps and inductors discriminate against some frequencies in favor of others. Capacitors preferentially pass higher frequencies; inductors pass lower frequencies more easily. Resistors help us set how much gets through, while caps and inductors select which frequencies get through. Inductors are big, heavy and expensive, so almost all tone controls use only caps and resistors.
The ’55 hollowbody line consisted of no less than eleven guitars. Models included the EP-4, EP-5, EP-6, EP-7, EP-11, EP-12, EP-13, EP-14, EP-15, EP-16, and EP-23. Clearly, in these instances, the numerical designation indicates appointments, not the number of pickups. Some of these are likely to be thin-bodied archtops with no cutaways, some thinlines with a single cut, and some full-bodied archtops with a single cutaway, with either one or two pickups, and probably no vibratos.
Barely used in my home, NUX Cerberus multi pedal. Not a modeler, it has true bypass distortion, overdrive, modulations(chorus,flange, phase, univibe and trem) as well as delay and reverb- all completely programmable and can be used as a pedal board or as presets. Built in tuner and cab simulator- great multi pedal can be used as a fly rig or in front of an amp- Comes in the original packaging with power supply. US buyers ONLY- I will not ship internationally- No returns accepted
Distortion is a feature available on many guitar amplifiers that is not typically found on keyboard or bass guitar amplifiers. Tube guitar amplifiers can produce distortion through pre-distortion equalization, preamp tube distortion, post-distortion EQ, power-tube distortion, tube rectifier compression, output transformer distortion, guitar speaker distortion, and guitar speaker and cabinet frequency response. Because many factors beyond preamp distortion contribute to a particular guitarist's sound, recording engineers and PA system techs typically put a microphone in front of the guitar speaker, rather than only use the guitar amp's pre-amp out signal. A sound engineer or music producer may send the DI out signal from the pickups to a separate track at the same time, so they can re-amp the signal later. In contrast, it is fairly common to use a DI box with electric bass.
There’s been a steady evolution in effects signal processing since the 1940s. Guitarist-innovator Les Paul was among the first and most avid effects developers, experimenting with echo and multi-track recording to add sonic excitement to his music. The first foot-switched effect showed up in the late ‘40s with Harry DeArmond’s Trem Tol tremolo processor that was later used by Bo Diddley. In the 1950s and early 1960s other effects were developed, but they tended to be expensive and some had operational issues. Meanwhile amplifier makers such as Fender and Gibson were building reverb and tremolo effects into their amps. These tube amps also produced tasty distortion and overdrive effects when gain and volume were cranked up to maximum settings. Today, many effects are designed to reproduce those sounds.
Multi-effects pedals and processors come in three basic formats: floor-based units equipped with foot-operated pedals and switches, tabletop units with knobs and switches, and rack-mounted units. Most tabletop and rack-mount units offer foot control options in addition to the knobs, switches, and menus accessible from their control panels. Pedals and footswitches are often user-assignable so that you can instantly engage various effects settings and other presets with a single toe tap.
The Squire Affinity Telecaster has an alder body, maple neck and fingerboard. It features two single-coil pickups with three-way switching. The tuners and hardware are solid and durable. The guitar is the cheapest telecaster in the telecaster series, but it’s still a decent build guitar. The guitar plays and feels nice. An excellent guitar for the beginner and intermediate telecaster fanatics.
While it was produced, Ovation’s super-shallow 1867 Legend was the recommended guitar in Robert Fripp‘s Guitar Craft.[22][23] Tamm (1990) wrote that the acoustic 1867 Legend has “a gently rounded super-shallow body design that may be about as close to the shape and depth of an electric guitar as is possible without an intolerable loss of tone quality. Fripp liked the way the Ovation 1867 fitted against his body, which made it possible for him to assume the right-arm picking position he had developed using electric guitars over the years; on deeper-bodied guitars, the Frippian arm position is impossible without uncomfortable contortions”.[22]
Seagull acoustic guitars are among the best values you are going find. They’re made in Canada, and there’s an attention to detail and craftsmanship here you may not expect in guitars at these price points. The Seagull Artist series is the top of the lineup. You’ll find unique tonewoods and high-quality construction techniques at an affordable price.
I suspect this has been done by someone but I can't find any such tests in my quick internet search. Seems to me this is the only way to really settle the debate; the differences may be too small to hear, but regardless if there is differences then the tone is being affected by the instrument. In that case the wood and body design is making the string vibrate differently, which is what the pickup...picks up.
Hi, my cousin gave me a bass guitar, the brand is called Cyclone by EKS Technology Inc. I looked it up and I could find barely anything. the bass has been in his garage since the early '90s and he told he that Fender bought the brand sometime around then, but I still can't find anything about the brand, apart from that they also produce electric guitars. almost as if the brand has been wiped from history. Any information regarding this brand would be gratefully accepted!
Same woods sounding different? OF COURSE!!! Look, I’ve been a carpenter for over 30 years and can absolutely inform you that there is a marked variation of characteristics of wood in the same species…density, tap tone, characteristics of how the individual piece reacts to being worked with tools…heck for all anybody knows internal stresses (for example as indicated by how a 12″ wide piece of wood reacts to being ripped down the center…many times both pieces end up being bowed and such) might play a big factor in how said piece of wood sounds musically…shrugs shoulders…
Anything for which they are wired and/or programmed.  One great example is my first real guitar, a Carvin V220.  It had two humbuckers in a sorta heavy angular gibson explorer body.  Each pickup had volume and tone with a 3 way selector for either or both pickups to be on.  In addition, you could toggle switches to split coils on the humbucker to do a good approximation of a single coil pickup.  Further, you could toggle in/out of phase to get a Peter Green tone or other effects.   Tom anderson guitars have great configurations.  I have gone to lighter strats in recent years and usually replace the pickups with handwounds and customize my 5way switch depending on the guitar.   I love true single coils except that I prefer a humbucker in the bridge. 
Definitely agree that Fender should be number one. Marshall is over rated, and fender brings the tone way better then a Marshall hands down. Marshall makes you pay for their name, fender only charges you for the amp components and the time tested fender quality. Why do you think so many amp companies try to replicate the fender tone?... Because its awesome and blows peoples minds!

I was thinking about my personal favorite and it’s just too hard to choose only one. There are too many brilliant creations and all unique in their own way. I love the simplicity of “highway to hell”, the beautiful, mysterious, wah wah riff of “Voodoo child”, I have a weak spot for almost every guitar riff by John Frusciante or Slash and not to mention the zillion riffs that aren’t even on the list. Thank god it never stops.
I have my Dad's '68 Kent guitar and am looking to have it restored..any info on parts would be helpful...I think all it needs is the spring for the vibrato (whammy bar)...everything else is there...the rubber piece on the bridge looks quite worn or perhaps brittle (rightfully so). Does anyone know what this guitar is worth? It's in orange sunburst ...It's a left handed guitar
Since 1998, many high-end US-made Fender Stratocasters such as the American Deluxe, American, Hot Rodded American, American Special and American Standard series came with an HSH pickup rout instead of a “swimming pool” (or “bath tub”) cavity to increase the total amount of wood that actually can resonate, producing a more complex tone. The HSH rout allows players to modify their pickups to the most often seen after-market configurations without re-routing or cutting into their guitar’s body, while maintaining more wood than a “swimming pool” rout.

We love guitars, they are definitely one of the best instruments of all time. What we don’t love is spending crazy amounts of money. We decided to find out what the best electric guitar under 1000 dollars is. Most often when it comes to musical instruments, you can’t expect budget beginners’ instruments to be as good as the best ones that cost ten times as much, but that doesn’t mean that there aren’t bargains to be found. For any skill levels looking for new acoustic guitars click here. If you want the best of both worlds, consider looking at our review of the top acoustic electric guitars.
Fender Kingman "C" Custom Shop Acoustic/electric in Fiesta Red, 1 of 150 worldwide. This was a limited production that came out of the custom shop in Hartford, CT. Has a Fishman pickup. Not a nick, ding or blemish will you find on this guitar, almost museum quality. Comes with original Fender case(perfect shape), Certificate of authenticity and other paperwork and allen wrench. Ships to the US only.
The lower strings of a guitar (E, A & D) will often have a nickel winding over their steel core. Nickel also makes an appearance in the frets of most guitars, which are commonly made from nickel-silver. Despite the name, this alloy doesn’t actually contain any silver, but is named for its silver appearance. It’s actually an alloy of copper, nickel, and zinc. These nickel-silver frets aren’t as hard-wearing as steel, so some guitar manufacturers use stainless steel instead to give the frets more longevity.
I've been to Steve about a dozen times with my guitars, families and friends instruments and have sent several people there and have nothing but great things to say. He is reasonably priced and likely one of the most talented and experienced Luthier's in Boston. It's rare to see any establishment get 5 stars from so many people and Steve deserves it! Only thing is, if you're in a rush to get your instrument back, go somewhere else where they do it quickly and without much thought/TLC. Steve takes his time to do it right and has a lot of customers because he's the guy to go to in the greater Boston area. Highly recommend!
Which tonewood works the best for you will depend on your personal preference as well as the genre of music you're playing. Electric guitar bodies come in a whole range of styles. You have classics such as the Stratocaster and the Les Paul shape, but there's much more out there to explore. Granted, a vast majority of these were heavily inspired by the aforementioned models and you probably don't want to go too far off into the realm of the strange.
SOLD OUT! Takamine EF406 RARE Here we have a RARE and GORGEOUS 1999 limited Edition Takamine acoustic-electric guitar, model EF-406. This instrument is a PREMIUM example of a New York or also called a Parlor guitar and is a Hand Crafted in Japan model an amazing example of Japans high Quality workmanship & fit & finish and is truly just as good as it gets. As you can see from the pictures, it is simply gorgeous to look at. It has a classic slotted headstock with Top Quality gold open gears and gold tuners with Pearl buttons. The Top- Back & sides are all a High grade choice AAAA FLAMED KOA with natural Koa color (there is no stain)and none was needed to bring out the AWESOME grain patterns of this Rare Native Hawaiian Wood. The top sound hole apears to be bound or painted and inside looks same as out /all Takamine internet information leeds to say the tops on this model is solid however we can not guarantee this as fact. The electronics are a GRAPH-EX pre-amp system: peizo transducer, with "exciter," volume, bass, treble, and mid controls. It comes with a deluxe, plush hardh shell case, note: In he picture close up of the ack of the headstock you may notice a dull spot running threw the center over the made in Japan tag area this is just a spot of waxed area that was inadvertently missed and not rubbed out... it is fine this guitar is in Excellent used condition. .

This guitar is one of the most popular choices for those looking for a quality acoustic guitar under $500. It comes in a dreadnought size or concert (smaller body) size. It also comes in a variety of colors (10 at time of writing). Some of the features of this acoustic are: Spruce top, rosewood back and sides, new scalloped bracing. Owners describe the sound of this guitar as full, bright, and balanced. It will surely bring a smile to your face as you strum chords for hours while learning new songs. See all the available color choices for this guitar here.
A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.
A common issue for playing on larger stages or in studios is the distance between a guitarist’s pedals and their amp. Guitar cables that are longer than eight or nine meters (25 or 30 feet) not only degrade the quality of the signal, but also become incredibly susceptible to noises like hiss and hum. To allow guitarists to drive their signal over 100 meters (300 feet), Radial created the SGI-TX/RX™. The SGI changes the unbalanced guitar signal to a balanced line-level signal, altering the impedance for longer XLR cable runs; guitarists are able to use their amps offstage or in an entirely separate room when trying to craft the perfect tone.
The CD-60CE is a Factory Special Run acoustic-electric guitar made by Fender. This inexpensive model comes with a Honeyburst gloss finish and a solid construction that gives a warm and rich sound. This guitar is made of laminated mahogany all-around. The top features scalloped X-bracing patterns for a wider range of frequencies and a distinctive sound.

What people may not know is that they have a very affordable line of entry-level guitars.  This line continues the legacy of craftsmanship and prestige that comes with owning a Taylor. Whether you look into their line of Baby Taylors – 3/4 sized guitars that play better than many full-sized budget guitars, or you look into their entry full-sized acoustics, Taylor will not disappoint you.

In a market filled with increasingly good Japanese copies of Les Pauls, the Ovation offerings fell, well, flat, despite obvious high quality. In ’75 both the Breadwinner and Deacon switched to Ovation humbucking pickups, metal covered with twin rows of six pole pieces. A very short-run Deacon 12-string debuted as well in ’75. In ’76 the blue finish on the Breadwinner was ditched and the Deacon acquired red, black and natural finish options. As synthesizer technology caught on in the late ’70s, some of these guitars became popular for adapting to synth playing, primarily because of their “high-tech” image.
The tone selector on an electric guitar controls the capacitor, which basically filters out high frequencies. The same way a high-cut filter (or low-pass-filter if you prefer) works on a standard equalizer. By dialing down the tone, you remove brightness and treble. The pickup selector does just what it's called.. Selecting which pickups being used to capture the vibration of the strings, and translates the energy into electric current, though the configuration and number of "presets" can vary from guitar to guitar, depending on how many pickups it has etc. If you're a handyman you can even configure this yourself.
The F-65 was the top of the line with two equal cutaways. Other than the bookmatched cutaways, this was the same as the two-pickup F-55, with the addition of a Bigsby-made Martin vibrato in which the stylized “M” had become a similar “V” shape. Probably the strangest feature of the F-65 was the fact that the heel of the neck did not change from the single-cutaway models, creating a sort of thick chunk of body extending up to the 14th fret. The first F-65 was #179834. 1,825 F-65s were made from 1962 to the summer of ’65.
The heaviest heffalumps in this year’s roundup, share a few strands of DNA with early Mastodon, blending bludgeon and benign  in ambitious and unpredictable ways. Brady Deeprose and Dan Nightingale form the two-pronged guitar attack, leading these lofty compositions from blast-beaten brutality to doom-y sludge and back again. Their debut album Mire was released last month and is the sort of fully-formed statement that requires metallers to pack a spare pair of pants.
Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  1 Meg Ohm, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.

My epi is very nice (Almost like a gibson for 1/3 of a gibson price) and obviously, my Jackson is far superior than my other guitars. But I'm just have mid end ibanez guitars and they are very good guitars. The high end ibanez are awesome and worth less than high ends of other brands in most cases having with the same quality (or superior in very cases).
Jazz rhythm guitar often consists of very textural, odd-meter playing that includes generous use of exotic, difficult-to-fret chords. In 4/4 timing, it is common to play 2.5 beat intervals such as on the 2 and then the half beat or "and" after 4. Jazz guitarists may play chords "ahead" of the beat, by playing the chord a swung eighth note before the actual chord change. Chords are not generally played in a repetitive rhythmic fashion, like a rock rhythm guitarist would play.
{ "name": "Tan", "skuUrl": "/El-Dorado/Vintage-Leather-Guitar-Strap-Tan-1274228084718.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "11-16-2018", "price": 85.00, "isOnSale": false, "msrp": 85.00, "salePrice": 85.00, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $4 back in rewards Valid through,85.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "85", "decimalValue": "00", "listPrice": 85.00, "isPriceDrop": false, "priceDropPrice": "", "promos":["freeShipping","international","return"], "warranty": false, "sku": "site51274228084718", "shipToStore": true, "displaySku": "361091000298000", "displayId": "1274228084718", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361091000298000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Vintage Leather Guitar Strap Tan", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"41079093650", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
Further down the Seagull line, looking at models outside of the Artist Series, the components and woods aren’t the same but we still see an impressive attention to detail. The Seagull S6 Original is a bare-bones acoustic, perfect for beginners and intermediate players. This is a guitar worth checking out if you need a solid acoustic and don’t want to break the bank.
If you’re a beginner you might not feel like you know enough to be able to test play different guitars, but play whatever you know and see if you notice any difference. If you only know a few chords, or even “Smoke on the Water”, then play that, it’s better than nothing! Don’t care about the staff hearing you play, they’re used to it and are probably just happy to have a potential customer.
Initially inspired by his older brother Jimmie, Stevie picked up the guitar at an early age and was playing in bands by the time he was 12. By the time he formed his legendary trio Double Trouble in 1980, Stevie Ray Vaughan was already a legend in his adopted hometown of Austin, Texas. After hearing and seeing Vaughan playing at Switzerland’s Montreux Jazz Festival, pop icon David Bowie invited Stevie to play on his Let’s Dance album. Vaughan’s career took off form there.
Anyway, this little beast didn’t need much work. This is one of the pleasures of working on a Champ-style practice amp. They have so little in them, there’s simply not much to go wrong or fix. This one, it turned out, only needed a filter cap job, a new preamp tube and one coupling cap. Piece o’ cake. Twenty minutes of soldering and one $4.00 7F7 tube later, I had a monster little Champ-esque amplifier (actually it sounds a little more like the Gibson Skylark than a Champ, but that’s cool by me) for under $80.
I have no idea what the set measurement is for the Authentics, and if it is any different than other guitars. Probably not. But guitars settle during their initial acclimation period and the exact bow of the neck and arch of the top can change. Actually it is almost certain to change some. There have been reports of all sorts of Martins with action reaching up near or over the maximum height within spec. But the same holds rue from brand of guitar that uses organic materials like solid wood.
If you are not attracted to the way the guitar looks or feels in your hand, chances are you won't be too eager to pick it up every day. When you are just starting out, this is supremely important. Here's where a disclaimer needs to be placed. This isn't always the case, and often times people warm up to a guitar even if they didn't initially like it, but why chance it?
Since there is little difference outside of the individual guitars featured in this series, I will nitpick a bit and say that RealLPC has the worst GUI of the four.  Where there was never any difficult-to-read text on RealStrat, there is some here, and the weird navy green parameter boxes along with a black Les Paul with gold trim doesn’t sit well for me.  
Legend has it that funkadelic's "Maggot Brain," the 10-minute solo that turned the late Eddie Hazel into an instant guitar icon, was born when George Clinton told him to imagine hearing his mother just died – and then learning that she was, in fact, alive. Hazel, who died of liver failure in 1992 at age 42, brought a thrilling mix of lysergic vision and groove power to all of his work, inspiring followers like J Mascis, Mike McCready and Lenny Kravitz. "That solo – Lord have mercy!" says Kravitz of "Maggot Brain." "He was absolutely stunning."
“What’s the best multi-effects pedal?” is a question that comes up again and again in guitar and bass forums and discussions, and for good reason! There are a lot of multi-effect pedals out there, with prices and features varying drastically from model to model. With multi-effects pedals, it’s a little bit different than something like distortion pedals. With distortion, there might be 50 different manufacturers each making a single distortion pedal. With multi-effects, there are only around 5 major manufacturers (Zoom, Line 6, Boss, DigiTech, TC Electronic), but they each make 10 models of multi-effect pedals. This can make choosing the best one tough for beginners and advanced players alike. Luckily, we’re here to help, and after a ton of research and play testing, we’ll help you decide what the best multi-effects pedals on the market are, no matter your budget and needs.
Living Colour’s Vernon Reid agrees but also speaks to a larger shift. He remembers being inspired when he heard Santana on the radio. “There was a culture of guitar playing, and music was central,” adds Reid, 58. “A record would come out and you would hear about that record, and you would make the journey. There was a certain investment in time and resources.”
Don't forget that you can use MIDI velocity and other controller data to create quite complex effects — and this approach can take up much less computing power than using audio effects. Don't forget that you can create audio-style effects purely through MIDI. For example, using a grid-style sequencer, it's very easy to program in echo and delay effects, just by drawing in the repeated notes and then putting a velocity curve over the top to simulate the echoes fading away. By combining this with automated MIDI control of other parameters — reverb send, filter cutoff and resonance, for example — you can alter the timbre of the repeated note and create dubby-sounding, feedback-style delays. Stephen Bennett

Variable 1: Speaker size. In Clip 1 you hear similar phrases played through models of four common speaker types. First comes the sort of 10" speaker you’d find in a small Fender Champ-style combo. Next is the 12" speaker of a midsized Fender-style combo, then a 12" Celestion Greenback you might encounter in a vintage Marshall cabinet, and finally the Celestion Alnico Blue from a vintage Vox combo.

One step up is the combination of a treble cut and a bass cut, with a single knob to select between them, like the one in the Electro-Harmonix Big Muff (Figure 2). The knob selects a blend of highs left over from the bass cut side and lows left over from the treble cut side. If you make the cut frequencies of the treble and bass sides far apart, you get a persistent midrange scoop, as in the original Big Muff. You can also have the bass and treble sides overlap in the middle and get a midrange hump in response. The near-endless variations you can get by tinkering with the relative values of the parts and the need for only one knob make this a favorite in effects.
The PRS S2 Custom 24 is a stripped down version of the expensive yet sought after PRS Custom 24 guitar, and because of its accessibility, it helped put the Custom 24 design into the hands of more players. What's impressive about the S2 Custom 24 is how it retains the same attention to detail and quality as PRS' more expensive guitars, making it a viable instrument even for those who can afford more expensive alternatives.
the product took a while to arrive which i was ok with they let u know ahead of time….however the only instructions is a poorly photocopied over view of the board and a few details of other items…nowhere is the wiring schematic… they give you a foot long one color wire not the 3 color connected wire they show here on amazon… kinda bummed on unfinished instructions…. disappointed with the single color wire i mean the foot switch has 9 openings where are the instructions for that? actually while writing this review i down graded it to a 1 star… i was getting more upset with the lack of instructions….
Oh, did you say you like lots of switches and pickups and knobbies?  Hell, welcome to our club!  Yes, the Norma 421-4 was the proverbial “king” of the catalog from 1968 to around 1970.  Similar guitars were sold in Japan at this same time, mostly carrying the brand name Liberty.This model was sold alongside a 12 string (EG412-2T) with a tremolo(!!!!!), a bass (EG467-2B), and a two pickup version (EG450-2).  Reading the catalog from 1968 is a real trip!  Here’s the description of the 412-4:
A lot of people begin with a nylon string acoustic, often called a classical guitar. They’re reasonably priced at beginners level (don’t go too cheap), the design has a wide fret board to accommodate your inexperienced fingers and the nylon strings are easier on your aching fingertips. You have to agree, they can sound kind of dull unless that dream of yours is of becoming a famous, classical guitarist like John Williams — certainly not a bad thing. So nylon string acoustics are great to learn with, but there’s a risk you’ll want something more pretty quickly.
Having got the technicalities out of the way, it's time to look at recording methods. The traditional method, and still the most satisfactory in many cases, is to mic up a really good amplifier, but where this isn't appropriate, we have a choice of physical modelling guitar preamplifiers, complete guitar/pickup/amp modelling systems using Roland's VG series of products, or the slightly lower-tech approach of using analogue guitar recording preamps (solid state or valve). The latest option is to plug the guitar directly into the computer and use a software plug-in to handle the amp and speaker modelling, but I'll start at the beginning with the miking options.
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
There's a sick little used Chinese Peavey going for $90 at my local guitar shop. It plays great, but nobody seems to want it. I'm already picking up a MIM strat from there, but after I save up a bit more change I think I'll grab it as well. You always have to dig for the good players, and sometimes you just happen to be lucky enough to find a cheap one on a fluke, doesn't matter where it's from.
The signal from your pickups or pickup selector gets routed to two tone pots. The 500k pot and .022 µF capacitor provide a conventional treble-cut control. Meanwhile, the 1M pot and smaller .0022 µF cap filter out lows. (Pay careful attention to the zeros and decimal points in those cap values!) The treble cut creates its effect in the usual way: by diverting signal to ground. But the bass cut doesn’t go to ground at all—the low-filtering cap is inline with your signal. Its output goes to the volume pot (250k in the original). Clever!
I have many Behringer pedals.Used them gigging.Have had many people ( lots of musicians ) asking me what I am using to get my tone and effects .They are all surprised when I tell them Behringer pedals.And almost all say the same thing."aren't they made of plastic"? Yes they are made of plastic.But being someone who has worked in the plastics industr.for 25 + years I know Plastic can be very strong .I have done hundreds of gigs with these pedals and never had a problem.You would really have to jump ontop of these hard to damage them.And if you did that with the non plastic pedals I am sure you would also have a problem .That said.I have 5 fx600 pedals because I found a site selling them for $14.A super bargin for so much effect.As far as battery power nowadays batteries cost more than pedals so anyone ... full review
"It's a labor of love," says Youngman, a guitar master who's been handling guitars since the '50s and '60s when rock 'n' roll was still in its infancy. But he's not just a surgeon; he's a neck specialist. "If the neck doesn't feel right, you're not going to play." He's always been good at setting guitars up, and today he works mostly from home, although he also does repair work at Guitarasaur in Watuga. "It's always nice to make someone happy. It makes me feel like I'm doing something right."
Yes, a Martin guitar under $500. The Martin LX1E features a sitka spruce top with mahogany back and sides. It carries the Martin name, which  means high quality is expected. Being that it is closer to out $500 limit, you can expect this guitar to deliver on tone. This one is a direct competitor to the Baby Taylor. People that own both have said that they like the sound of the Martin better, describing it as bright and crisp. The tradeoff is the playability is not rated as high as the Taylor. See more pictures and reviews of the guitar here.
Ok, funny enough last week i got my old squire Tele out the loft to perform a maintenance on it and i adjusted the Truss rod, action, innotation. I've installed some nee pick ups too. But it still doesn't mean that there aren't easier guitars out there to play. There are differen't necks, frets, body shapes etc that all factor in. Someone has already said that a Tele is one of the hardest to play so i still think my question is valid
With that in mind, the quality of said effect is satisfactory, to say the least. You maybe won’t see the same level of refinement as you would in some stand-alone models, however its reverb comes across as fairly organic. On top of that, you are presented with several decent options. All of that aside, the real value of this Zoom comes from its ability to combine up to 6 effects at any given time.
The more solid wood there is, the better the overall resonance, sustain and tone of the acoustic guitar. Solid wood, specially those used on the tops of acoustics, also resonate better as it ages. The downside to solid wood is mainly its more premium cost, and not to mention it uses more wood resources than laminate wood. Solid wood is also more prone to damage, so they require extra care especially from changing weather and humidity. Laminate woods are more affordable, and they are also more sturdy and resistant to damage. On the flip side, they will lack the resonance and sustain of solid wood, but this can be a good thing if you're looking for vintage mid-range focused tone.
{ "thumbImageID": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Natural/J46217000007000", "defaultDisplayName": "Fender American Professional Stratocaster Maple Fingerboard Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000138952", "price": "1,499.99", "regularPrice": "1,499.99", "msrpPrice": "1,500.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Natural-1500000138952.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Natural/J46217000007000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000030467", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst-1500000030467.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst/J46217000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030468", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sonic-Gray-1500000030468.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sonic-Gray/J46217000005000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sienna Sunburst", "sku": "sku:site51500000030466", "price": "1,499.99", "regularPrice": "1,499.99", "msrpPrice": "1,500.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst-1500000030466.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst/J46217000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030469", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Antique-Olive-1500000030469.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Antique-Olive/J46217000006000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51500000030470", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Olympic-White-1500000030470.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Olympic-White/J46217000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000030471", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black-1500000030471.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black/J46217000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }