If you play with your guitar’s tone controls all the way up, your tone is going to be trebly and bright — possibly even painfully shrill at high volumes. To get a handle on their range, get a clean sound cooking out of your amp and play at every numeral stop on your instrument’s tone pot dial. And for multi-pickup models, do that for each individual pickup and all the blended settings. Find a few positions you like, and while playing a tune you know by heart, roll to different settings for verses, choruses and solos and see how tonally diverse and interesting things become. On stage this can be a very impressive way to create fresh sounds — subtle, but noticeable — without relying on pedals or amp channel switching.
One master's name that kept being repeated by the guitar experts was Roger Crisler of Crisler Guitar Repair in Carrollton. He's been in the business of repairing guitars for almost 40 years. Some of the best guitarists in the DFW area turn to him when their guitar is sick: Chris Watson, Bnois King, Zach Weeks, Drew Adkins, Smokin' Joe Kubek, the list just continues to grow. He's trusted, and his work is respected. "When you love what you do, it doesn't feel like a job," he says.
For example, bass guitar frequencies are on the relatively low end of the tonal spectrum. However, plucking a bass string can create a sudden, short burst of high and mid-frequency sounds. You need your bass amp to be loud enough to make those low-frequency sounds strong and audible in the mix, but you don’t want to flatten your band mates or blow out your speakers by sudden pops of high-frequency sounds.

Depending on the type of music you're playing, you may actually want your compressor pedal at the end of your chain. For example, if you're playing country music, a compressor pedal at the end of the chain squashes everything, regardless of the effects you're using. With rock music, on the other hand, it typically works better right after the filter pedals.


Firs, I'm a tube guy - 68 Vibro Champ, 57 Deluxe, Falcon. Next, I have hand wired boutique pedals. And C, I have owned previous Zoom iterations of this pedal, my favorite is the MS100 BT. With all that said this unit is awesome!! It's all metal and a solid build. The onboard tuner is easy to get to and has more options than I expected. I love that it is stereo out and has an aux in for my iPhone backing tracks. Now the sound - the word is the started from the ground up on modeling amps, cabs and effects. I can tell you the rocks my sox. Whether I'm going through it with my SG or my Les Paul this thing screams. From trippy ambient delays and reverb to 50's rock. The acoustic guitar tones are very convincing. All this for $200 is a steal. I would ... full review
"I have purchased 15 personalized guitars from the top guitar custom shop. All the guitars have met or exceeded my expectations. Great workmanship and quality work. An exceptional group of people to work with. They are ready to answer your questions or concerns. The one time i had a concern about a guitar they responded immediately and handled the situation more than i expected. I highly recommend this company!" Dr E C Fulcher Jr - Abingdon, Maryland USA.
Hidesato Shiino (1947–). Music-Trade.co.jp. Dai-Show Corporation. — The person who involved with a lot of remarkable Japanese guitars including: Yamaha FG, Fernandes & Greco models, Morris & H.S. Anderson (named after his son; well known as Prince's Hohner Telecaster), early ESP, Vesta Graham & Vestax (now known as DJ brand), Akai Guitar 1997 series, D'Angelico, etc.
In low-end instruments laminated or plywood soundboards are often used. Although these materials often impart great strength and stability to the instrument, via layers of perpendicular grains, they do not vibrate the same way that natural wood does, generally producing an inferior tone with less amplification. Instruments with laminated or plywood soundboards should be avoided if possible.
While there's nothing necessarily wrong with plonking your mic right at the centre of the speaker cone if it gets what you're after, a lot of producers take the time to experiment with different positionings off axis, where the sound is typically warmer. Mike Hedges: "Depending on where you have [the mic] — outer speaker or inner speaker — you get the difference in tone from the edge of the speaker and the centre of the cone." In fact, Mike Clink also tries small changes in position even when working with basically on-axis sounds. "I'll point [the SM57] exactly dead on, though I might move it an inch or two to get the right sound."
when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier.  
We are recording between June and July our new album entitled "Brutal Agression" which should be out in October/November, also we were recently invited to Rock al Parque in Bogota, which is one of the biggest festivals in Latin America, joining Cannibal Corpse, Havok, Symphony X, Internal Suffering and many more. After that we will play at other festivals such as Mamut Fest y more to be confirmed, then we will concentrate on album release and touring, which will be accompanied by one or more videos.
Do you know what does custom shop means? Like custom shop cars and motorcycle, furniture. With Top Guitars it pertains to woodworking, most of us would define a custom shop as one dealing with made-to-order goods with certain specifications. Someone comes into my realm with a certain vision. That vision may be on a set of architectural prints or still locked in their brain waiting for extraction. In either case, it’s a vision or plan that they have, not me.
Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used.
Electric guitar necks vary in composition and shape. The primary metric of guitar necks is the scale length, which is the vibrating length of the strings from nut to bridge. A typical Fender guitar uses a 25.5-inch (65 cm) scale length, while Gibson uses a 24.75-inch (62.9 cm) scale length in their Les Paul. While the scale length of the Les Paul is often described as 24.75 inches, it has varied through the years by as much as a half inch.[citation needed]
 Best Answer:  Half of playability is how your hands interact with the neck. Me, for instance, I've found that BC Rich necks are just too big... I can play it, but it's uncomfortable enough to make it a little akward. On the other hand, ultrathin necks like those you find on many Jacksons (Dinky's, etc) are a little too thin, over time my hands actually hurt from playing them. I discovered that I was playing them too hard, but even beyond that they're just too thin. For me, LTD necks are where its at for me. Rather inexpensive ones, EC-50 and EC-100QM, but once I upgraded the electronics, got a setup, and replaced the pickups, I was happy with them. 

The arched top Strats all had maple necks, rosewood ‘boards, black hardware, Floyd Rose licensed locking vibrato systems, and slight finish variations. The SSL-1 had a single humbucker with a volume control that had a push-pull coil tap. This could be had in metallic black, purple burst, white pearl, red pearl, and pink fire. The neck on the early SSL-1 is described in different sources as having a stain finish or as having an oil finish; there’s probably a clue to dating sequence here, but I don’t know the answer.
Shimming a neck: The best shims are one piece and the full size of the neck pocket. For this veneer from the hardware store works well. However, it is very hard to get an even taper on these. The next best option is to use masking tape. Masking tape is paper which is wood fiber so it's almost as good as a solid shim, and much better than the smaller shims which leave large gaps which impedes the transfer of vibration, and could cause problems later on. To make a tape shim, lay strips of tape side by side perpendicular to neck, and add layers to provide the taper. i.e. stripe 1- 1 layer, stripe 2- 2 layers, stripe 3- 3 layers. Place the neck in the pocket, mark outline of pocket, and trim just inside outline.
{"id": "K47863", "categoryId":"site5ABA", "name":"California Redondo Player Acoustic-Electric Guitar", "pageUrl":"/Fender/California-Redondo-Player-Acoustic-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/California-Redondo-Player-Acoustic-Electric-Guitar-Jetty-Black/K47863000001000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"399.99", "priceMin":"399.99", "priceMax":"399.99", "msrp":"400.01", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"392", "brand":"Fender", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMID,site5LAAB", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"352089750023", "priceVisibility": "1", "itemType": "New"}

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
Electronics.  If your guitar comes with a pickup system (either from the factory or aftermarket) we will test it before it ships.  Poor sound, uneven string balance, and just plain component failure is all checked & corrected so you don't have to fool around with it. If your guitar's system requires a battery inside the guitar, we may remove it prior to shipping.
Guitar Center Albuquerque provides comprehensive guitar repair services for the Albuquerque area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Albuquerque can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.

While relatively new compared to many established brands on the market, Seagull has managed to gain traction in the past few decades. Started in Canada in 1982, the company focuses on building high-quality acoustic and acoustic-electric guitars. These usually use solid tops rather than laminated tops, resulting in crystal-clear sounds and superior quality.


Originally, the Californian brand created by Randall Smith in 1969 used to offer Fender mods, just like Marshall, to give the amps more gain or, in other words, more distortion. And they managed to seduce Carlos Santana and Keith Richards. The Mark series was the brand's flagship until the introduction of the Rectifier series whose name refers to their current rectifying technology (a rectifier converts AC to DC). Mesa Boogie is certainly the best-known brand after Fender and Marshall. It is still the reference among metal musicians, especially thanks to bands like Metallica and Dream Theater who tend to use Mesa products on stage and in the studio. More recently, Mesa Boogie introduced the Atlantic series that includes the TransAtlantic TA-15 and TA-30. These two amps reflect the manufacturer's interest in the "lunchbox" market.


I dont know but im looking for a good bass guitar too. Depends on your price range. Personally I realy like Ibanez basses and think they do really good low to mid price range basses. If you are looking at a professional quality basses you should look at Rickenbacker, Musicman (stingray), Fender, Lakland and Shadowsky as they are the main brands for professional basses.
The Kent 800-series hollow bodied guitars all had asymmetrical bodies and the pickup closest to the neck was tilted. There are several Kents that had symmetrical hollow bodies and no tilted pickups. The pickups are either humbuckers or wide single coils with covers. They resemble Gibson ES-style guitars. The necks and headstocks are very similar to the Kent 800s. They're probably newer than the 700s and 800s. I won’t be covering those here.
The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.

The Pocket Pal is a recent addition to the Hohner standard line of harmonicas. It is somewhat unusual because it is slightly shorter in length than most harmonicas, leading to its namesake of being pocket handy. It is Chinese made, which is unfavorable to most harmonica players, but the Pocket Pal has caught on as an inexpensive, yet quality harp. Like the Old Standby, the Pocket Pal is designed for use in country music.[26]
Fender’s MIM (Made in Mexico) Stratocasters are offered as an affordable option, buyable at about half the rates of their American siblings. Moreover, you can also select your preferred one from among the maple and rosewood fingerboards, SSS or HSS pickup configuration, and color variations. You can also find several models available with Floyd Rose tremolo and pretty tops. For those requiring American Fenders, the American Original Series is available with all essential features.
While it is well loved for its HD amp models, it also packs quite a lot of effects (over 100!), applying the same HD modeling technology on actual stompboxes to get them to sound as close to the real thing as possible. The amp modeling and effects section together allow for a wide variety of tones, while the deep controls that you have over each amp and effect parameter allows for even more in-between tones, so you can craft your very own sound. The LED rings add to the unit's overall eye candy and improve the already intuitive interface of the unit. It also houses extensive input and output options, including having its very own mic preamp, so you can use it for a variety of instruments and even vocals. Other features include built-in 48-second looping, tuning and compatibility with Line 6' modeling instrument (Variax) and amps.

Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.


This guitar manufacturer started out as a parts supplier in the early 1970s. Atlansia didn't begin production of guitars under their badge until infamous engineer and designer Nobuaki Hayashi of Matsumoku fame became the company's president and chief designer in the late 1970s. Since then, Atlansia has continued to produce cutting-edge guitar designs in Nagano, Japan. The company did not make any other badged guitars other than namesake Atlansia.
ESP LTDs are a ripoff. All the money goes into the finish and nothing else. Cheap hardware and poor electronics. All of the LTDs I've ever owned couldn't stay in tune worth a damn, have noisy, pop-y switches and crappy pots. I have the Viper 400, and it's an overrated turd. Luckily I got it for a steal. Thing can't stay in tune AT ALL. I will be replacing the alleged Grover tuners with real Grover lockers. That still doesn't solve the issues with the soft finish and ultra-noisy electronics. Plus it has a humpy neck, a cracking neck joint (like all of my LTD set-necks) and the frets were likely leveled by a monkey considering the quality.

Another cool place I just found was Madison Guitar Repair out of Fridley. I went there a couple weeks ago. It's a little hole in the wall place where they just work on guitars and have tons of parts. Really nice guys that seem like they know their stuff pretty dang well. Never used them but considering that all they do is luthier work I'd give them a shot.


{ "thumbImageID": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "defaultDisplayName": "Schecter Guitar Research C-1 Platinum Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Transparent Midnight Blue", "sku": "sku:site51500000239535", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "699.02", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue-1500000239535.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Translucent Black", "sku": "sku:site51364222300326", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "799.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Translucent-Black-1364222300326.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Translucent-Black/H96103000001000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/C-1-Platinum-Electric-Guitar-Translucent-Black/H96103000001000-00-60x60.jpg", "imgAlt": "" } ] }
×