The Hi-Flier likely is among the first of Univox's guitars. For those who don’t know, the Hi-Flier takes after the Mosrite Ventures. This guitar gained significant influence in Japan, particularly because of the Ventures’s enormous popularity in the country at that time. The Ventures were an instrumental group who rose to fame worldwide in the ‘60s, and, despite their decline in the U.S. in the ‘70s, remained “Beatlemania huge” in Japan up until today. Along with the Ventures-esque guitar, a Hi-Flier bass was designed as well, which was nearly identical to its six-stringed counterpart.
With electric specifically, it's important to ask what genre's of music do you want to play and who are your influences. A humbucker pick-up found in Les Pauls and SGs sound MUCH different than single-coils found in Stratocasters and Telecasters. If you like the sound of your guitar heroes, chances are you will like playing through similar gear. Again, go with my BUDGET, FEEL and SOUND trifecta!
Maton was founded in 1946 as the Maton Musical Instruments Company by Bill May and his brother Reg. Reg was a wood machinist, and Bill a jazz musician, woodwork teacher andluthier who had for some years operated a custom guitar building and repair business under the name Maton Stringed Instruments and Repairs. The name “Maton” came from the words “May Tone” and is pronounced May Tonne.
The main purpose of the bridge on a classical guitar is to transfer the vibration from the strings to the soundboard, which vibrates the air inside of the guitar, thereby amplifying the sound produced by the strings. The bridge holds the strings in place on the body. Also, the position of the saddle, usually a strip of bone or plastic that supports the strings off the bridge, determines the distance to the nut (at the top of the fingerboard).
Intonation is difficult since the bridge is a bar of metal with grooves cut into the top. The whammy bar works and provides a nice warble in a limited range. Action is a bit high at the moment, and adjustment is limited to bridge height unless I shim the neck (no truss-rod adjustment is obvious). Still, the short scale and light strings make it easy to play anyway.
The Thunderhead guitars would be offered until June of ’72, with several model designation changes along the way. In ’70, the K-1360 became the K-1213, and in May of the following year changed again to the K-1233. At the same time, the vibrato-equipped models also changed, the K-1460 becoming the K-1214 and then the K-1234. The Tornado lasted until the end in January, ’73, but also went through the model number changes along with the Thunderheads, the K-1160 becoming the K-1211 and then the K-1231. The vibrato Tornados went from K-1260 to K-1212 and then K-1232.

Fred’s wife Lynn Shipley Sokolow served as our student tester. She plays double bass and banjo in the Americana quartet Sugar in the Gourd but is just starting to learn her way around the electric guitar. I also got Wirecutter’s John Higgins to give me his opinions of the amps; he is a Los Angeles session musician and frequent Wirecutter contributor who has a master’s degree in music from the University of Southern California and more than 10 years’ experience teaching music at private schools.
The Educator 10 is a 10-hole, 40-reed chromatic harmonica built on a plastic comb. It is designed without the valve or windsaver technology found in many other chromatics, and because of its ten holes, it is smaller than most chromatics. This makes it a simple and inexpensive chromatic, ideal both for novices and for experienced diatonic players making the transition from the smaller 10-hole harmonicas. Like the Chromonica, it plays ​2 1⁄2 full octaves.[38]
Acoustic amplifiers are intended for acoustic guitars and other acoustic instruments, especially for the way these instruments are used in relatively quiet genres such as folk and bluegrass. They are similar to keyboard amplifiers, in that they have a relatively flat frequency response with minimal coloration. To produce this relatively "clean" sound, these amplifiers often have powerful amplifiers (providing up to 800 watts RMS), to provide additional "Headroom" and prevent unwanted distortion. Since an 800 watt amplifier built with standard Class AB technology is heavy, some acoustic amplifier manufacturers use lightweight Class D amplifiers, which are also called "switching amplifiers."
Three full steps from standard tuning. Used by Dream Theater, Adema, Asking Alexandria on From Death to Destiny and The Black, Boris, Cannibal Corpse, Morbid Angel (on several songs starting with their album Covenant), Father Befouled, Sepultura, Jeff Hanneman of Slayer (on "War Zone" and "Here Comes the Pain" from God Hates Us All and "Not Of This God" from World Painted Blood. Kerry King used a 7-string for those songs), Mutoid Man (Stephen Brodsky started using the tuning during the recording of the Helium Head EP to fill in the low end of the sound, in an attempt to make up for their lack of a bassist at the time), American Head Charge, Nickelback (on "This Means War" and "Gotta Get Me Some" from " Here and Now" and Nevermore (when band switched to 7 strings).
In my own (first) project guitar, I did not know quite what to expect, so I built it with HSH pickups and two complete signal paths. The humbucking path uses 500k pots and an 0.047 cap; the single coil path uses 250K pots and a 0.022 cap. I did this with stacked, concentric CTS 250K/500K pots and an on/on toggle switch, all within the minimal confines of a standard Telecaster control plate. I created a custom 5-way selector switch to isolate the single-coil wiring from the humbucking combinations, but in the end when I flip the switch I opted for just the stand-alone single coil for the warmest sound. As I said above, the tapped humbuckers just didn't compare. This project is a work in progress; I hope this helps you find your own path.
The first step is to determine what’s in your pickup already. The most common magnets for humbuckers are (roughly in order of strength): alnico 2, alnico 4, alnico 5, and then various types of ceramic magnets. In simple terms, the stronger the magnet, the greater the potential output. But you can’t just look at magnetic strength alone, because stronger magnets also affect the string’s ability to sustain.
Now, for most players, deciding what should go where on a signal chain simply came through trial and error along with a good dose of common knowledge. And while a player’s signal chain should be his or her own, those of you out there new to creating a solid signal chain can benefit from some of the general 'rule of thumb' type of advice that can get you started in the right direction.
Essentially the 28s looked very similar to the E/EM/EB-18s. They had the same offset double cutaway body outline and the modified Viennese three-and-three headstock. Instead of maple laminate bodies with glued-in necks, the 28s had mahogany bodies and necks in a neck-through-body design. The basically slab bodies of the E-18 had gained a carved top, with a deep contour in the upper waist. The brass nut had become a Micarta nut. Fingerboards were now ebony. Finishes were sunburst.
I haven't listened to all the amps on the list but found the Rivera Knucklehead blew away every Fender, Marshalla and Mesa in the shop when I was testing things out for the clean blues with a PRS. My daughter playfully plugged in a Gretsch baritone, cranked up the gain and Three Days Grace came screaming out with the finest quality. She agreed the Knucklehead was a win.
Alibaba.com offers 169 korean electric guitars products. About 86% of these are guitar, 5% are guitar parts & accessories, and 4% are other musical instruments & accessories. A wide variety of korean electric guitars options are available to you, such as paid samples, free samples. There are 169 korean electric guitars suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of korean electric guitars respectively. Korean electric guitars products are most popular in North America, South America, and Eastern Europe. You can ensure product safety by selecting from certified suppliers, including 6 with ISO9001, 4 with FSC, and 1 with GSV certification.
Guitar Center added a replica of the “Black Beauty” Les Paul Custom, with three pickups, that Peter Frampton used as his main guitar from his days in Humble Pie through his early solo career, photographed playing the instrument on the front jackets of his albums Frampton and Frampton Comes Alive. It has all the same qualities such as the three uncovered humbucking pickups and missing pickguard. The Black Beauty was not issued until 1957; however, the one given to Frampton by a fan named Mark Mariana was a 1954 model that had been routed out for a middle pickup.
The Estimated Values shown on each web page are out-of-date in many cases. One person cannot possibly keep every page up-to-date, so that is why we created a Wiki system to allow anyone to help maintain the database. We invite anyone who sees a problem with any Estimated Value to report it to us by clicking the Report A Problem icon at the top of each page (it looks like this ).
1. Blackstar ID:15 TVP ($229): This is one of the best combo amps on the market and with good reason: it comes with a variety of options to not only get you playing in no time. It also allows you to record very easily with a built-in USB option. You can select from six different power responses modeled after popular tube amp sounds (via Blackstar’s True Valve Power system) and even when turned down, the amp doesn’t lose its bite. The built-in multi-effects allow you to experiment with the world of effects and the Insider Software allows you to edit up to 128 user storable patches to further your sonic crafting.
In late 2013, it was announced that Absara Audio of Port Jefferson Station, New York, had purchased the rights to the Supro trademark from noted electronic engineer Bruce Zinky.[7] Zinky himself had used the Supro name for a series of amps beginning in 2005 from his company, Zinky Electronics. Absara announced in January 2014 that a series of new Supro amps would debut at the Winter 2014 NAMM Show in Anaheim, California.[8] The new Supro amps are cosmetically reminiscent of their progenitors from the 1960s.
If there is one body shape out there that everyone will recognize, it is this one. In terms of finish, Fender chose a lacquer clear coat to show off the natural wood instead of their usual choice, and it looks pretty awesome (of course there's a 3 tone sunburst and olympic white too). Made of ash, this particular Strat offers a U-shaped maple neck with a maple fretboard that is bolted onto the body. In terms of pickups, we have a set of three single coils belonging to their vintage line. These come with Alnico magnets, giving you that classic tone we all love so much. The hardware follows the canon as well. Here we have Fender's well known synchronized tremolo bridge paired with a set of F tuners on the headstock.
Guitar Center Twin Cities provides comprehensive guitar repair services for the Roseville area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Twin Cities can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.
This fuzz sounds great! Different from a standard fuzzface or tonebender sound, and much more musical in my opinion. Not buzzy at all, very smooth. It is not one of those over-the-top fuzz sounds. It's more of a fuzzy overdrive. But really the amount and quality of the fuzz is highly dependent on the transistors. Q1 seems to effect the amount of output, and Q2 changes the character of the fuzz. I tried many combinations and ended up using 2N2222's for both (BC109's also sounded great!). One other ... full review

Like Ibanez, Jackson is known for targeting the metal crowd. They have a variety of instruments available from affordable lower-cost guitars to high-end pro/enthusiast guitars. Jackson likes to keep their designs unique. Think of an 80s metal band and what they might be playing. If you thought of pointy guitars with sharp angles, Jackson might be what you’re looking for. Jackson not only sounds metal, it looks metal too. The Jackson King V, for example, is a staple instrument. If you know who Dave Mustaine is, you’ve heard of Megadeth. Because he was a co-founder and its guitarist. He is one of the people who made the Jackson King V as famous as it is. However, the design can be a bit too over the top for some people. Not everyone wants their guitar to be as “loud” as the sound it produces.
Anonymous, that's tough one. Usually, breaking the D string would be down to two things - a sharp edge on the saddle (unlikely if you're using a roller bridge) or your technique. The only other thing I can think of right now is the break angle (how sharply the strings pass over the saddle on the way to the tailpiece). Perhaps raising the tailpiece (or feeding the strings through from the front and then passing them over the tailpiece - you could do this second one with the D string only) might help.

The 5968 written on the label is a model number, not a serial number. It seems that the labels were void of serial numbers rather than model numbers (the opposite of what I had originally suspected). The Dorado I'm working on is constructed of rosewood while the Model 5969 is Mahogany. The 5969 is identicle in size to the 5968 but had nickel plated tuners and a satin finish. From my quick look around the auction business, it appears that the Mahogany back and sides model brings about $150 less than the Rosewood model.
The Matsumoto Musical Instrument Manufacturers Association was the organization responsible for Fresher guitars. Little is known about this association, other than it did not have larger guitar manufacturers Matsumoku or Fujigen Gakki as members. Nakai Gakki was a possible member of the association. Fresher guitars began production in 1973 by the Kyowa Shokai Company, an association member, which was also responsible for the Camel badge. It's interesting to note that Fresher guitars were eventually being produced by Chushin, which leads me to believe that they may have been an Association member along with Kyowa. The beginning production year was considered a low quality benchmark for the company. The Fresher brand continuously improved in quality until 1980.
There are more expensive versions of the Alex Lifeson signature available, but the SE that we’ve chosen has a really nice balance of price and specification. This is a firmly mid-range guitar, and is really good value at that. It’s a slightly thinner body style, but with PRS’ nice traditional acoustic hybrid shape, and comes with all of the high quality hardware and electronics that you’d expect from PRS.

If you love the Telecaster look and sound, then here’s a great entry level Tele for beginners. In fact, “entry level” really doesn’t do this Telecaster justice. I’ve considered buying this exact model for myself–for times when I need to record some true single coil tones. If country twang is your thing, this is the guitar to get started with. But the Telecaster isn’t a one-trick pony. Plenty of rock (and even metal) players have used Telecasters over the years. Swap that bridge pickup with a single coil-sized humbucker and you’ve got a guitar that can do rock and metal with the best of ’em.
Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce and Cedar as the key to getting the desired tone from a guitar. Indeed, many beginning builders agonize over wood choice combinations as they relate to tone, with more experienced craftspeople offering suggestions that seem to assure the correct … [Read More...]
Those items considered -- performance notation and computational capacity for emulation of stringed instrument sounds otherwise reinforced by the same speaker systems that amplify synthesized sounds -- the other significant factors in the realism matrix involve economics of VST production, listener preferences and, least we forget, performer or producer preferences.
Another Quality Ibanez Guitar ....This example is MODEL VINTAGE # V302 BS...And it IS A REAL GEM and it has a Premium German Sitka SOLID Spruce Top, WoW! what a nice original finish this one has...AAA Mahogany Sides-Neck & Back "see quality og the grain in the pics" . Lots of Full-and Wonderful rich tone from this baby. Its real ez to play & stays in tune well. It is a crafted in Japan guitar and it compairs favorably to Gibson, Guild or Martin! Please Note: If you prefer the guitar in Natural and not sunburst see our other listing for another V302 non sunburst we have in stock & available.. thank you for your interest, Joe .

Having said this, if it’s for a child under 12 we normally do recommend a nylon string as it’s easier for them to press the strings down. Some children can have tougher hands than others, so if you have a rough and tumble child, they mght be able to handle steel strings earlier than usual. Check out our buying guide for Choosing a Guitar for a Child for more information.
Today, Van Halen is one of rock’s most influential and imitated innovators. As unpredictable and flamboyant as Hendrix, Van Halen has had an unmeasurable impact on the guitar community. By the mid Eighties, his self-described “brown” sound, over-the-top techniques (including two-handed tapping), and revolutionary trem-bar effects inspired a generation of aspiring guitarists who bought the one-pickup, one-volume-knob, Floyd Rose–equipped Strat-style guitars that Van Halen made famous.
Soundwise, it still packs the same AudioDNA2 processor but somehow sounds 'better', I think John Johnson (founder of Digitech before it was sold to Harman re-hired to work on this RP) had a lot to do with the improvements. I think they have made this with it being used/abused in mind, from the rigid metal chasis, to the USB connectivity, line-in jack to play along backing tracks, headphone input, stereo out, built-in looper (40 seconds) and the awesome Stompbox and SoundCheck features.
Processed Pitch Shifts: Few pitch-shifting algorithms are transparent enough to allow you to transpose anything by more than a couple of semitones without obvious side-effects. If what you're processing is going through an amp modeller, however, you can get away with much more radical changes. You can even do effective swoops and dives in pitch by progressively increasing the amount of pitch-shifting you apply to a note, and pitch changes of an octave or more can sound good, although they probably won't sound natural at these extremes. Sam Inglis
Since joining Charley's team, Russell has worked on hundreds of guitars. Music shops across Dallas and Fort Worth call him with questions. He's even corrected other guitar masters' mistakes, and he's also repaired some of the music industry's finest guitarslingers, including the guitarist from Cold Play and countless prominent local musicians. "It's part of the joy is knowing that I'm helping put players in a position where they can get on stage and feel confident knowing their guitar is working at its peak." He's also probably the only guitar master on this list asked to restore a broken guitar back to its original broken state. But it wasn't just any broken guitar. It was Elvis Presley's Martin D-28. "Elvis had broken it." This guy is truly more than a guitar master; he's a magician performing musical magic at Charley's five days a week.

Johnny Marr is an iconic and influential guitarist best known for his work in the Smiths, which broke up in 1987. His guitar phrases and his genius for crafting textured and tonally rich rhythmic leads has influenced countless rock guitarists of the last quarter-century. Since leaving the Smiths, Marr hasn't exactly been idle or resting on his laurels.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
The electric guitar setup routine is as important to your sound as any component on your instrument. In addition, if you learn how to setup your guitar correctly you can save some money by not running down to the local guitar shop, and paying them to do it. I want to preface that I am not an expert on the building of guitars. I did not go to the "Fender/Gibson school of Luthier excellence". I am however someone that's built a dozen electric guitars, and have setup everyone of them. Additionally I've setup probably fifty more guitars, including acoustics, for friends, and friends of friends, who found out I've got some practical experience in the matter.
One trait of most ribbon mics is the figure-of-eight polar response, and this is often exceptionally consistent across the frequency range. This polar pattern means, of course, that ribbons tend to pick up a little more room ambience than cardioids, given that the polar pattern is as sensitive behind the diaphragm as it is in front. Ribbon mics are also often characterised as sounding 'smoother' compared with typical condenser microphones, partly because their construction avoids the high-frequency diaphragm resonances normally inherent in condenser designs.
Finally, there were some twelve Hawaiian lap steels in ’55, the EG-NT, EG-K, EG-Z, EG-A, EG-S, EG-R, EG-L, EG-7L, EG-P, EG-8L, EG-M and EG-NW. Again, since I have no reference materials, there’s no point in attempting any description. However, many of these guitars continued on into the ’60s where we’ll discuss them in detail, and you can probably extrapolate backwards to these mid-’50s models, allowing for pickup changes, etc.
{"id": "361091", "categoryId":"site5LRABAA", "name":"Vintage Leather Guitar Strap", "pageUrl":"/El-Dorado/Vintage-Leather-Guitar-Strap.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Vintage-Leather-Guitar-Strap-Black/361091000001000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"1", "message":"", "value":"85.00", "priceMin":"85.00", "priceMax":"85.00", "msrp":"85.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"11", "brand":"El Dorado", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMI,site5LP", "stickerText": "", "isVintage": "0", "outletonly": "0", "checksum":"41079093650", "priceVisibility": "1", "itemType": "New"}

Made famous by George Harrison in the ‘60s, the jangly Rickenbacker 360/12 12-string electric guitar has become perhaps one of the most iconic 12-string electrics. With a semi-hollow body and thru-body neck, the 360/12 is able to create a unique tone that is difficult to create with other 12-string guitars. Though this model has undergone many changes and seen many iterations through the years, the newer Rick 360/12 models have a slimmer neck and are still highly-sought instruments.
Combo or Head + Cab? Again, this is a personal choice. It's easier to have a combo, but a head + cab combination might be easier (& lighter) to carry, as you can carry both parts separately. Of course, if you're in a metal band, you simply MUST use a really loud head amp (no matter how small the venue is) and a 4x 12" speaker cabinet. That's just how it is...it's in the rock bible, somewhere! We've put together a complete guitar amp buyer's guide to help you figure out what you need.
As you will note in the earliest catalogs, Ibanez guitars were first "copies" or "reproductions" of guitar models originated by several American guitar manufacturers and manufacturers from other countries. They were not forgeries, as they were never sold with misleading logos or with the intent to deceive. Ibanez models replicated such styles as the Gibson Les Paul, Fender Stratocaster and Telecaster, Rickkenbacker styles, and others. Due to their high quality, Ibanez guitars and those made under other brands, such as Greco and Aria, quickly earned a reputation around the world as quality instruments at a great value. There is a form of urban legend that circulates in the guitar community that has many variations, but usually involves either Gibson or Fender suing Ibanez, Aria, or some other Japanese manufacturer, with the intent to stop that company from manufacturing superior copies. The truth is less glamourous. Only one company ever sued another, and it was Norlin (the owner of the Gibson brand at the time) suing Hoshino (owner of the Ibanez brand) and the suit was focused only on the "open book" headstock shape common to Gibson guitars and replicated on the Ibanez guitars. The suit was brought in 1977, but by then Ibanez had already changed the headstock shape on its copy models, so the suit was settled out of court. No other company was ever sued by any other company. However, this episode has given rise to the term "lawsuit" guitar, which is used to describe any Japanese copy guitar made in the shape of an American manufacturer's model.
{ "thumbImageID": "SG-Special-Electric-Guitar-Cherry/517239000019000", "defaultDisplayName": "Epiphone SG-Special Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51273888007012", "price": "179.00", "regularPrice": "179.00", "msrpPrice": "299.00", "priceVisibility": "1", "skuUrl": "/Epiphone/SG-Special-Electric-Guitar-Cherry-1273888007012.gc", "skuImageId": "SG-Special-Electric-Guitar-Cherry/517239000019000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SG-Special-Electric-Guitar-Cherry/517239000019000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51273888006945", "price": "199.00", "regularPrice": "199.00", "msrpPrice": "299.00", "priceVisibility": "1", "skuUrl": "/Epiphone/SG-Special-Electric-Guitar-Ebony-1273888006945.gc", "skuImageId": "SG-Special-Electric-Guitar-Ebony/517239000035000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SG-Special-Electric-Guitar-Ebony/517239000035000-00-60x60.jpg", "imgAlt": "" } ] }
Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
His tone is incredible and he is capable of an extreme vibrato that is perfect for his style of playing.  It’s obvious he’s not working hard for it.  His choices of strings benefit his economy of motion.  Even though he maintains low action on his Fender Stratocasters and even scallops the frets for acrobatic, tight-rope string walking, his ability is only strengthened by the ease of playing light string gauges.

Fred’s wife Lynn Shipley Sokolow served as our student tester. She plays double bass and banjo in the Americana quartet Sugar in the Gourd but is just starting to learn her way around the electric guitar. I also got Wirecutter’s John Higgins to give me his opinions of the amps; he is a Los Angeles session musician and frequent Wirecutter contributor who has a master’s degree in music from the University of Southern California and more than 10 years’ experience teaching music at private schools.

Pre-delay on the reverb can help separate it out from the source sound. If your reverb has no controls for pre-delay, you can simulate this using a simple delay on an aux track before the reverb. Decay Settings: Choosing the most appropriate reverb treatment for a song can be surprisingly difficult, especially if you have hundreds of presets to choose from. So, instead of regarding reverb like the glue that holds the mix together, try adjusting its parameters (and in particular the decay time) while listening to the reverb return by itself. If the decay time is too long you'll hear a continuous mush of sound; if it's too short you'll scarcely hear it unless its level is turned right up. Somewhere in the middle you should find a setting that adds rhythmic interest to your song, without overpowering it, making the reverb work for its keep. This is also a useful technique when using several reverbs in a song, to make sure they complement each other. Martin Walker

I have been using a Belcat tube 50R guitar amp. I've owned all the top amps,Fender, Marshall,Mesa,Peavey. This Belcat amp,with pedals, is one of the best sounds I've ever gotten. It's not heavy like a twin,and the clean sound is great, although it's hard to beat a Fender Super reverb,or a twin for pure tone,but I don't like how Fenders sound with distortion pedals. I have a Marshall Combo and a Blackstar HT Club 40,love them both,but I've been using the Belcat. It's distortion,on it's own,is a blues type, not heavy, but with a Rat it screams, or a Boss Blues driver,or Ibanez Tube Screamer,you can get just the sound you're looking for. Too bad they're not making them anymore, it's really a good amp!

Guitar loudspeakers are designed differently from high fidelity stereo speakers or public address system speakers. While hi-fi and public address speakers are designed to reproduce the sound with as little distortion as possible, guitar speakers are usually designed so that they will shape or color the tone of the guitar, either by enhancing some frequencies or attenuating unwanted frequencies.[47]
Combo or Head + Cab? Again, this is a personal choice. It's easier to have a combo, but a head + cab combination might be easier (& lighter) to carry, as you can carry both parts separately. Of course, if you're in a metal band, you simply MUST use a really loud head amp (no matter how small the venue is) and a 4x 12" speaker cabinet. That's just how it is...it's in the rock bible, somewhere! We've put together a complete guitar amp buyer's guide to help you figure out what you need.

Though pitch-shifting is an effect, it is easier to control when used via an insert point. However, if you need to use the effect on several tracks in varying amounts, you can use it via a send/return loop, providing the shifter is set to 100 percent wet. That way, you can adjust the effects depth for individual mix channels by using the send control feeding the pitch-shifter.


Hey Frank i removed the pick guard and discovered why they were so tall.I just bought the guitar the day i asked you about it and it was late very late after midnight and i found out someone used pick guard screws to just secure them to the PG…lol And i have it back together correctly installed now.No pictures yet here is a better detailed description.The body is solid wood stained factory dark cherry.Rosewood fretboard semi-enclosed tuners…SSS P/U arrangement in a 3 ply black PG and 5 way switch and probably weighs 8 lbs.Thanks ….Larry
Launch price: $999 / £899 | Type: Amp modeller/multi-effects pedal | Amp models: 33 | Effects: 42 | Connections: Standard guitar input, minijack stereo aux input, standard main outputs (L/Mono, R), XLR main outputs (L/Mono, R), standard stereo phones output, standard Send (L/Mono, R), standard Return (L/Mono, R), MIDI in, MIDI out/thru, USB, expression pedal | Power requirements: Mains power (IEC lead)
Unlike fuzz and distortion pedals, booster effects typically are engineered to boost the signal reaching the amp without adding coloration. Some booster pedals do slightly fatten the tone of the guitar by overdriving the preamp stage of the amplifier. They can be very useful in getting your amp to break up and produce musical-sounding distortion at lower volume levels as well as adding clarity to your solo riffs. A booster pedal can become an essential part of your rig when you have more than four effects in your signal chain or 18 feet or more of cabling between your instrument and amp.
Tom Petty's lead guitarist for more than 40 years, Mike Campbell never clutters up a song with notes when two or three bull's-eyes will suffice. "It's a challenge to make your statement in a short amount of time," he has said, "but I prefer that challenge as opposed to just stretching out." Listen to the skeletal hook that holds "Breakdown" together or the laconic, tone-bending solo in "You Got Lucky" to hear Campbell's ingenious use of negative space. "Michael is not one to show off," Petty once said. "What he says is essential."
Shimming a neck: The best shims are one piece and the full size of the neck pocket. For this veneer from the hardware store works well. However, it is very hard to get an even taper on these. The next best option is to use masking tape. Masking tape is paper which is wood fiber so it's almost as good as a solid shim, and much better than the smaller shims which leave large gaps which impedes the transfer of vibration, and could cause problems later on. To make a tape shim, lay strips of tape side by side perpendicular to neck, and add layers to provide the taper. i.e. stripe 1- 1 layer, stripe 2- 2 layers, stripe 3- 3 layers. Place the neck in the pocket, mark outline of pocket, and trim just inside outline.

The chord below (an Am) is going to be used for demonstration. Firstly, you'll notice the name of the chord labeled up the top. Next you'll see a "grid" below it. This grid represents your guitar fretboard. The 6 lines running downwards represent the six strings on your guitar with the fattest and lowest sounding string on the left hand side. The horizontal lines represent the frets on your guitar neck. The top line is the top of the neck.
{"pageName":"[mf] pdp: ibanez dt1gfm destroyer electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";H98107","linkInternalFilters":"javascript:,musiciansfriend.com","channel":"[mf] shop","prop7":"[mf] product detail page"}
The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.
A DPDT (2PDT or 2P2T) on/on switch has two channels (poles), each having three lugs. This is like having two SPDT switches in one. It’s the standard configuration for most push/ pull or push/push pots, and you can use it for almost all mods, including the seven-sound mod (if you leave one pole unconnected), coil-splitting a humbucker, out-of-phase mods (by adding some jumper wires from pole 1 to pole 2), a direct-through mod, and countless others. Let’s see what’s going on here.
Teisco produced guitars that were sold in the U.S. as Teisco del Rey as well as Silvertone, Beltone, Duke, Decca, Heit Deluxe, Jedson, Kimberly, Kingston, Lyle, Norma, Tulio and World Teisco, as well as some of the early Kents. At various times Teisco guitars were made for and sold under the now well-known Ibanez name. They have developed somewhat of a cult following in the U.S. which has resulted in some unrealistic prices for some models.
There’s a lot of knowledge here to digest, so the best advice anyone can give you is not to sweat it too much. You aren’t going to become a pedal encyclopedia overnight, and even if you could, you’d be missing out on the fun experience of trial and error that comes with figuring out your first pedals. The truth is that some of the most distinctive guitar and bass effects ever recorded have been the result of artists experimenting with effects units they’d never used before – especially in the 1960s, when pedals were brand-new to everyone.
Effects can be connected via insert points, or the effect send and return loop that is included in most consoles and DAWs (Digital Audio Workstations). When effects are used in the send/return loop, their Mix control should be set to 100 percent wet, so you add back only effected sound to the dry sound, which comes directly through the mixer channel.
Earth Quaker Devices – Have you ever heard a song and wondered “how did they get that sound?”. If it was a recent recording there is a good chance these guys were behind it. They make an incredibly wide range of pedals that all go from great quality, usable pedals for almost any style to the weirdest, most wonderful tones that you have never heard before.
Non Locking Tremolo FAT/SAT TREMOLO TREMOLO ARM INSTALLATION The tremolo arm can be inserted and removed very easily. Insert the arm into the armhole on the tremolo base plate. Pull up on the arm to remove it. TREMOLO ARM ADJUSTMENT (SAT PRO) To adjust the height of the arm, remove the tremolo spring cover from the back of the guitar, and use a 3 mm Allen wrench to turn the height adjustment screw attached to the bottom of the tremolo block.
Following the lead of Electro, which was having some success with their cast aluminum alloy bodies, Dobro – still a separate company – introduced its first cast aluminum Dobro Hawaiian electric lap steel guitar, probably in late 1934. Along with the aluminum lap, Dobro also debuted the Standard Guitar, and the Mandolin. Accompanying these was the Dobro Amplifier. All four listed for $67.50. These are all shown in the ’35 Tonk Brothers catalog.
Since 1946, the P-90 has been pleasing guitarists with its vintage-soaked tone, that shares qualities of both single-coil pickups and humbuckers. P-90s are primarily single-coil in their construction (although larger and flatter), and come in a range of different housings. Although they feature a relatively low output, they provide a meatier tone than a single-coil, but with a bit more sparkle than a humbucker, and are therefore very versatile. They have been put to great use in rock, blues and jazz music, with Pete Townshend, Tony Iommi, and Carlos Santana all taking advantage of the sweet P-90 tone. On our chart above, the Seymour Duncan Antiquity is a great example, but check out more P-90 highlights on the dedicated page.
I use a coat hanger wire to hang the body and neck from when I paint. It keeps the guitar from touching any thing and makes it easier to move from one place to another. I like to dedicate one place for painting and another for drying to avoid any free floating particales from landing on the wet paint. I use a shed for painting and hang the guitar to dry in my garage.
{"product":{"id":"L20582","stock":"backorderable","price":"899.00","name":"Slash Firebird Limited-Edition Electric Guitar","download":false,"sku_id":"L20582000001000","checksum":"565047124900","rep_id":"site1prodL20582","sku_rep_id":"site1skuL20582000001000"},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red

Like in the overall best-selling list, there are a few amps on this list which have been discontinued but continue to sell very well on the used market. Part of the reason these amps rank so high on our lists is that Reverb is one of the only places these models are still being sold, meaning that our sales likely account for a sizable chunk of the entire used market for these particular amps.

• Guitar : ELECTRIC SUNBURST captures the sound of a classic guitar, chosen with its rich, warm and versatile sound. The continuous signal path has been retained throughout, including high-quality cables, vintage tube preamps and high-resolution transducers to ensure that every nuance of this legendary instrument was accurately fixed. Since the string holder and neck were recorded separately, you can fully control the balance of the mix. Moreover, a condenser microphone was installed above the strings to capture subtle sound nuances and add punch and realism.
A variation of the wah pedal is the auto wah. Not to be confused with a city in Canada, auto-wah effects do the same things a wah does, but without the foot treadle. Usually, you can adjust the attack time (how fast the tone shifts toward the treble) and the depth of the cycle. Some auto-wahs also let you set a constant up and down motion that's not triggered by the note. You’ll find auto-wahs included in many multi-effects processors. One of the newer developments in this area is the Talking Pedal from Electro-Harmonix. While eliminating the moving parts of traditional wahs, it produces amazing male-vocal and vowel-sound effects that harmonize with your guitar’s notes. A fuzz circuit lets you dial in more growl and grit.
A pedal itself can have an effects loop, but the most commonly used place is on the amplifier itself. You'll see on most amps (but not all) some form of output labeled as Effects Send or Preamp Out accompanied by an input labeled Effects Return or Power Amp In, respectively. Both sets of outputs and inputs refer to the effects loop that you can add between the preamplifier and the power amp section of your amplifier.
A very, and in my opinion (from experience), the most difficult technique to learn and one of the most versatile. From simple single string transitions (a term I use to describe it I don't know the actual term) and used in jazz to quick shredding in rock. Learning this skill was not only a task, but helped me more fully understand a lot of musical theory.
Electric Guitars- Vintage, new & used / Second-hand electric guitars by Kay, Teisco Del Rey Ray ET J-1, Univox & Silvertone. Cheesy Japanese, Surf Guitars. Also guitars by Ibanez, Gibson, Fender, Peavey, Martin, Zon, Gretsch, Rickenbacker, Diasonic & More. Les Pauls recording, lap steels / slide guitars, Barney Kessel style, Fender Stratocasters, Telecasters, Squire Bullet series, Peavey Falcon neck Martin Acoustics, bass guitars, Zon Legacy Elite 5 string Bass, Diasonic double single cutaway, Rickenbacker, archtop, Gretsch TW-100T Traveling Wliburys guitar, Hamer Mirage 1, Yamaha sg-2000, Fender Jag-Stang, Gibson Howard Roberts, Ibanez Artist AR-100 to name a few.
The Martin DSR2 also comes equipped with built-in Fishman Sonitone electronics, which features discrete soundhole mounted controls, allowing for stage-ready performance without having to drill excessive holes on the side of the body. With its continuesly high rating and incredible value for money, the Martin DSR2 should be at the top of your list when you're looking for an acoustic-electric guitar in this price range.
Reverb is one of the most fundamental effects for electric guitar, which is why it is already built into most amps. Reverb adds natural sounding depth to your sound. Used extensively in the recording world, electric guitars do not sound “right” without it. Just a little makes the guitar have more of a natural sound and decay, but you can go to the extremes and get cavernous depth to your sound. Plate and spring are the most common types, but with so many makers coming up with new sonic “spaces” to play in, finding your reverb sound is a priority.

While it can’t be used to guide early versions of the B52 to their targets (despite looking the part) it does, however, answer all the guitar tuning and guitar amplifying needs of the modern musician. It acts like an amp during concerts, one that allows you to pre-load the exact settings the band used during studio recordings, so the fans won’t get disappointed at a live performance sounding like a bootleg version of the tunes they came to hear.

So, I was looking for a single-ended amp. Say what you will about class A/B amps (and, to be fair, most of the great recorded tones in rock history are class A/B push-pull amps), some of them don’t really get singing until they’re too loud for the bedroom or studio. Sometimes you just need to hear that cranked tone without getting the knock from the neighbors. To quickly recap:


It has a 32bit float point DSP for better sound and True Simulation of Analog Circuits (TSAC) technology to give great modeling with your choice of 60 amplifier models. It has built in looping (up to a massive 60 seconds) , a sample-based drum machine and MP3/WAV player, sophisticated user interface and big colorful LCD display. MG20 is the pro solution for guitarist who wants great tone and function.
Firstly, we advise sticking with a brand name you can trust. We’ve established that there’s nothing particularly premium about the guitars on offer at $200, but by sticking with Fender, Ibanez, Yamaha, Epiphone, Oscar Schmidt and the others on this list, you at least guarantee a guitar from a renown guitar manufacturer with some history, instead of something thrown together by a company who don’t specialise in instruments.

The standard tuning, without the top E string attached. Alternative variants are easy from this tuning, but because several chords inherently omit the lowest string, it may leave some chords relatively thin or incomplete with the top string missing (the D chord, for instance, must be fretted 5-4-3-2-3 to include F#, the tone a major third above D).
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Sitka Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Nut Width: 44.5mm - Fingerboard: Rosewood - Frets: 20 - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Hardware: Chrome, Grover Tuners - String Instrument Finish: Light Violin High Gloss Sunburst, Dark Violin High Gloss Sunburst
The Squire Affinity Telecaster has an alder body, maple neck and fingerboard. It features two single-coil pickups with three-way switching. The tuners and hardware are solid and durable. The guitar is the cheapest telecaster in the telecaster series, but it’s still a decent build guitar. The guitar plays and feels nice. An excellent guitar for the beginner and intermediate telecaster fanatics.
Early proponents of the electric guitar on record include Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Eddie Durham, Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra), Tampa Red, Memphis Minnie, and Arthur Crudup. According to jazz historian James Lincoln Collier, Floyd Smith can be credited as the first person to rig up an amplified guitar. According to Collier, "Floyd's Guitar Blues" may be the first important use of the electric guitar on record.[17]
×