The Hi Flyer was a thin-bodied reverse Strat-type with a German carve around the top, almost always seen in sunburst. This was identical to the Aria 1702T. The bolt-on neck had a three-and-three castle head, plastic logo, string retainer bar, zero fret, 22-fret rosewood with large dot inlays. A white-black-white pickguard carried volume, tone and three-way. Two black-covered single-coil pickups were top-mounted, the neck slanted back like on a Mosrite, with six flat non-adjustable exposed poles in the center. An adjustable finetune bridge with round saddles sat in front of a Jazzmaster-style vibrato. The plastic logo was still in use in 1971, though gone was the string retainer, replaced by a pair of little string trees. Dots had gotten smaller by ’71, and the Hi Flyer was available in three finishes – orange sunburst (U1800), black (U1801) and white (U1802). The Hi Flyer listed for $82.50 (plus $12 for case) in ’71.

So, here’s the deal: the M5 is NOT an amplifier modeler (no Marshall or Vox recreations here), nor is it meant to replace your entire pedalboard. This is ONLY an effect modeling pedal, and contains over 100 effects, of which you can have active one at a time. In terms of “extras” it has a tuner and tap tempo. The Line 6 M5 is a perfect first pedal to buy, since with 100+ built-in effects you can play with all of them and find out what types of effects you really like. It’s also a perfect pedal to simply just have on your pedalboard, for situations where you need a certain effect and don’t have a pedal for it. Need a reverb in a pinch? It’s a reverb. Need a compressor? You got it. Need a phaser? Yep, it’s that too. It’s also really inexpensive for what it is, making it a great starting point that you can build upon.

We consider the finest tonewoods to be those with superior projection and sustain, and without weak or bright spots within the tonal range. Many of the wood species from the US Pacific NW meet this criteria, and more. Some were well known by luthiers, but others, like Myrtlewood, Claro, Franquette & Bastogne Walnut, Port Orford Cedar, Redwood, Pistachio, Olive, Osage Orange and Douglas Fir are just now gaining notoriety.

I too have a similar Alvarez made in Japan, 4 digit model no. etc. Mine is a 5059 autumn heringbone model and there is actually a production date on the tag in the sound hole of 1978. The tag is identical to yours as is the headstock logo inlay. Tuners are different however. Based on the similarities to yours I would date it around the same years, '77-'80. I know the model name due to an Alvarez advertisement clipping that depicts the model I have. I too am getting ready to do some much needed TLC to mine as it has been my most loved acoustic for 20 years now. It was a gift from my mother who used it in a country band way back when. These are great guitars that can be bought very cheaply when you can find them. Good luck with the search!
Yes, don't do it. Take her to a music store and let her play whatever they have that's within your price range, and let her take home the one she most enjoys playing. You don't need to spend a ton. I just bought a used Breedlove for a similar gift, and it was under $200 at my local music store. The key is finding one she doesn't want to set down. That's what will get her playing.
Originally, distortion of the guitar signal happened accidentally when tube amps were turned up too loud. While distortion was first considered undesirable, players soon came to recognize that a distorted signal increased the amount of sustain they could get out of each note. This essential discovery created a fundamental shift in guitar soloing styles to include extended notes such as those produced by a wind instrument or organ. Used on rhythm guitar parts, distortion thickens up the signal and allows for a much heavier, chunkier sound.
The other US-based manufacturers were from Chicago Harmony (formerly owned by Sears), National-Dobro (Supro/Valco) and Kay. Chicago was the largest guitar manufacturing area of the US at the time. The only other manufacturer of Silvertones during this period was the Japanese-based company, Teisco (or Teisco Del Ray as it was formerly called). Teisco created some of the wildest designs for Silvertones, in our opinion. The earliest model was the TG1. This was the first guitar to incorporate an amplifier and speaker into the body of the guitar. Although some people look down on the Japanese guitars we think they've got some really interesting sounds and innovations not found on American made guitars.
In 1932, John Dopyera left Dobro and came back into the National fold, regaining control of the company. We can only speculate that the absence of Beauchamp has something to do with his decision. National and Dobro merged in 1935, becoming the National Dobro Company. However, until the end of the ’30s, when National Dobro finally completed its relocation to Chicago, Dobro instruments continued to be made in L.A. by what had been the separate Dobro Corporation, even though it was a part of National Dobro. Got it? Hmmm…

There are nine types of guitar here: four folk, two classical, one flamenco, one jumbo and one gypsy, as well as a choice of nylon or steel strings. It works like Kontakt in that you have MIDI keys for playing notes and then control keys for the playing articulations, such as legato, palm mute, harmonics, sustain or chord detection. There are different chord types and a strumming engine to recreate the action of playing.
Cordoba is a fast growing guitar builder that specializes in nylon string acoustic instruments, played by artists like the Gypsy Kings and Bon Iver just to name a few. And with their ever increasing reputation, we find it only fitting to give them a spot on this list, specifically for the impressive quality and tone of the GK Studio. This nylong string guitar incidentally provides a refreshing break from the many steel-string acoustics that are featured here.
Also in 1952, Kay introduced the matching K-162 "Electronic" Bass, which was the first commercially available thinline-hollowbody electric bass guitar, and the second production electric bass guitar after the Fender Precision Bass debuted in 1951. Due to the use of K-162 by a bassist of Howlin' Wolf, Andrew "Blueblood" McMahon, it is commonly known as the "Howlin Wolf" bass. These instruments[clarification needed] are believed to be the first semi-hollow electrics[citation needed] (i.e., thinline-hollowbody electric with solid center-block), predating the Gibson ES-335 by six years. Their unique design[clarification needed] featured a flat top with no f-holes, a free-floating arched back, and two braces running along the top. The result was a semi-acoustic instrument that was feedback-resistant while retaining natural acoustic resonances. In 1954, Kay added the K-160 bass to its catalog with baritone tuning, according to the catalog,[citation needed] "tuned like the first four guitar strings but one octave lower." Structurally this bass was basically same as K-162 bass, except for the higher pitched tuning and the addition of a white pickguard.

Play with it, see what happens. Worst case; you’ll set it, forget it or use it as a means to dial out some hum. Best case, you’ll find the guitar in your hands is far more versatile than advertised and use the tone knob to wield it like a musical samurai and leave everyone wondering…”how the hell do they get so many sounds without a guitar change?!”

Epiphone Zakk Wylde Les Paul Custom Plus Bullseye Solidbody Electric Guitar at a Glance: Loaded with Zakk's blazing-hot custom EMG active humbuckers Totally solid mahogany body and hard maple neck deliver freakish sustain Premium hardware put this Les Paul in a class all of its own Loaded with Zakk's blazing-hot custom EMG active humbuckers Turn up the heat with a pair of the most outrageously amp ...
By the way, if you like older Japanese guitars, you must obtain a copy of Mr. Noguchi’s book, ’60s Bizarre Guitars (Guitar Magazine Mooks, Rittor Music). It is lusciously printed in color and, while the text is in Japanese, model names and dates are in English, so it is an invaluable reference tool, as well as a fun coffee table book. Some of the following information on specific guitars comes from this source, as well as catalogs and other research materials kindly provided by dedicated guitar fans in both the U.S. and Japan. It’s virtually impossible to reconstruct a comprehensive chronology, but we will attempt to document some broad-brush details and periods of what guitars we can, and with luck you’ll be able to search out and identify your favorite Teiscos with much greater authority. Your corrections and additions are most welcome!
I have tried many different wiring schemes as well, with 3-way switching, 3-way with coil taps, and even bypassed the tone control (since I never dial back the tone in my playing anyway). I have played this guitar through high-gain amps (Carvin V3, all three channels, Carvin Vai Legacy), through VOX AC15, Vox AC30 (both with Greenbacks and with Celestion Blues speakers), and an Orange 2x12 combo. In all of these excellent amps where my Carvin SC90 guitar sings and sparkles and does whatever I want it to, this Frankenstrat with Duncans or with Carvin P'ups sounds like a fart after 12 glasses of cheap Charles Shaw wine.
Got one, a V-???? Gold Top w/ P-90's. Way hotter than my PRS or my Gibson. Plays about as well. If I were a LP kinda guy I'd probably rant and rave, it has a special place in my herd but not in the top five. If you want an LP style and sound but don't want to spend $3K plus, it's more worthy than any of the Epi's I looked at including the '56 reissue.

While jazz can be played on any type of guitar, from an acoustic instrument to a solid-bodied electric guitar such as a Fender Stratocaster, the full-depth archtop guitar has become known as the prototypical "jazz guitar." Archtop guitars are steel-string acoustic guitars with a big soundbox, arched top, violin-style f-holes, a "floating bridge" and magnetic or piezoelectric pickups. Early makers of jazz guitars included Gibson, Epiphone, D'Angelico and Stromberg. The electric guitar is plugged into a guitar amplifier to make it sound loud enough for performance. Guitar amplifiers have equalizer controls that allow the guitarist to change the tone of the instrument, by emphasizing or de-emphasizing certain frequency bands. The use of reverb effects, which are often included in guitar amplifiers, has long been part of the jazz guitar sound. Particularly since the 1970s jazz fusion era, some jazz guitarists have also used effects pedals such as overdrive pedals, chorus pedals and wah pedals.

The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
Plug one in, and you'll understand what an acoustic instrument is supposed to sound like while playing live. Unplugged they sound great as well, especially the deep bowl models. I hear from my friends that they think those rounded backs feel awkward to play while sitting down. I have a deep contour bowl, that is way more comfy playing relaxed in my couch than even my little 000-martin.
Rickenbacker basses became a staple of 1970s hard rock and were featured on countless recordings of the decade (such as the first two albums by Deep Purple). These instruments were also widely used among progressive rockbassists, particularly Chris Squire of Yes and Geddy Lee of Rush, who achieved distinctive signature sounds with their Rickenbacker bass, strung with round-wound Rotosound bass strings. The “Ricks” were not as visible among the punk/new wave explosion of the late 1970s and early 1980s, with the notable exception of Kira Roessler (Black Flag). Many bass players continue to play Rickenbackers. (see “Ric” players section below)
A. Electric guitars either have bolt-on, set neck, or neck-through neck construction. Bolt on necks are simply bolted onto the body, set necks are set into the body and glued, and neck-through construction is where the neck extends all the way through the body. The latter is generally considered the best and most durable, but won't be found on cheaper guitars.
Hawaiian lap steels are not in the American Teisco Del Rey catalog, however, five laps remained in the ’66 Japanese Teisco catalog. Still available was the Harp-8, an 8-string console with two pickups and some sort of electronics controlled by four floor pedals. Still around were the H-39, the H-905 and the self-amplified TRH-1. Also available was the H-850, a single-pickup 6-string very similar to the H-905.
Potentiometers are used in all types of electronic products so it is a good idea to look for potentiometers specifically designed to be used in electric guitars. If you do a lot of volume swells, you will want to make sure the rotational torque of the shaft feels good to you and most pots designed specifically for guitar will have taken this into account. When you start looking for guitar specific pots, you will also find specialty pots like push-pull pots, no-load pots and blend pots which are all great for getting creative and customizing your guitar once you understand how basic electric guitar circuits work.

Playing the guitar is no joke. To be honest, not all who bought a guitar end up playing. Maybe it’s just hype from friends and family or along the way found something else more interested on. You have to remember that you will spend countless hours practicing and the time you spent to it is impossible for you to get it back. This is not meant to discourage but to challenge you to succeed.
Delay – a time-based effect that sounds like an echoing of your guitar tone. A delay pedal creates a copy of your guitar tone that repeats like a fading echo. Delay pedals usually have a time knob that allows you to choose the time of the delay intervals, an effect level knob that controls the volume of the delayed sound and a feedback knob that controls how many repeats are sounded before the effect fades. See different types of Delay below:
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: 3-Color Sunburst
Editor’s Note: My previous top choice, the Yamaha APX500iii, is now replaced with a newer and better model, the Yamaha APX600. What make’s it better, you ask? Well, there were some complaints regarding the previous model for having a lack of bass response and a “bland” sound when unplugged. Yamaha addresses this issue by changing the guitar’s bracing pattern, thus improving it’s overall sound response, making the APX600 a good choice for an acoustic-electric guitar. I suggest you go check this bad boy out.
Hi Jeff. I just wanted to point a couple of things that IMHO are not 100% accurate. Most probably its just to make things not too complicated, but I think is important to notice them. First, resistance is not frecuency dependant, and therefore it doesn´t have any effect on high frecuency content. However, Impedance does, and impedance is the resistance on the AC world (and a guitar signal is an AC signal). Therefore, the reason both long cables and pickups loose high frecuencies as they get longer is because the capacitance in them increases, and capacitors have a certain impedance (once again, resistance in the AC world). So you may actually be true, but its because of impedance created by the capacitance and inductance present on the pickup. Will continue..
Welcome to the gallery of Silvertone guitars from the collection! The instruments are listed in chronological order from left (oldest) to right (more recent). The gallery will continue to grow as we get more Silvertones. The purpose of this gallery is to help identify all the Vintage Silvertone guitars from the 1950's through the early 1970's. We're major fan of Silvertones and have discovered that there's a lot of misinformation out there.
If you’ve decided to make the neck from scratch, rather than purchasing it, you will want to cut that at this point. Make sure you are following specifications for how it will need to connect to the body. It’s best to cut the basic shape first and then refine.  You also need to hollow out space for the truss rod. Finally, for a rosewood fretboard, you will need to laminate the board to the neck.

Producing one of the most popular clean sounds in rock, you’ll rarely see a solid-state amplifier with as much notoriety as the Roland JC-120. The amp was introduced in 1975, offering pure “JC Clean” sound with 120 watts of power and a built-in Dimensional Space Chorus effect. The JC-120 features dual 12” speakers plus dual power amps that drive the speakers to their full potential for a stunningly clear sound. As a result, the amplifier became a favorite among players like Andy Summers, Robert Smith, Johnny Marr, Jeff “Skunk” Baxter and more.

Presuming it is at least theoretically possible to digitally document in computational language every nuance of Eddie Van Halen's performance, the other aspect on the rendering side of the best-most-real equation is the guitar - from the pick or fingers on the strings, to the resonance of the wood body, the dynamics of pickups, the amps, the effects and such other processing gear.

The biggest issue when starting out is not to get any bad habits with picking or hand/finger positioning. I'd highly recommend to find a teacher who - not necessarily on a periodical basis - would take a closer look at your progress and technique and make adjustments when needed. There are lots of bad habits that you can get and I'd rather spend some money on lessons than weeks of lifetime to undo those.

You’re probably not going to damage your laptop by plugging in a guitar. But take it easy. Instrument output is usually about 10dB louder than mic level and 10dB quieter than line level. But there’s a big variation between instruments, and of course, your guitar has a volume output. On an electric, it’s just an attenuator — there’s no active circuitry, the volume knob just knocks down the output of your pickups, some use it as creative control, some just to match a cheap amp better.

2) The neck edges at the fret board are not rounded and tend to be rather sharp which can really start to hurt your hands if you play for awhile . Typically this is where guitar companies skimp on their budget models and Yamaha didn't disappoint. But it's an easy fix for a Luthier who will just take some sand paper and sand down the sharp edges and dress the end of the frets if needed. Also, its an easy fix for someone with a steady hand, good eye, and a women's fingernail file. It took me about 10 minutes to round the neck edges with a fingernail file and it didn't even require touch up paint thereafter as the fret board is solid wood and the same color all the way through. She feels like a dream now and I can play all day long without the sharp neck edge digging into my hand, and my hand just glides ever so smoothly up and down the neck as it should.
On some amps, setting the "gain" or "drive" control above a certain setting causes an overdrive effect, either due to the natural effect of overloading the preamplifier (or the preamp tube on a tube amplifier) and/or due to a distortion effect being turned on. Tube amplifiers typically also have a "standby" switch in addition to an "on/off" switch. Controls are typically mounted on the front of the amplifier near the top of the cabinet; often the knobs are recessed so that they do not project beyond the wooden cabinet, to protect the knobs during transportation. On amplifier "heads", protective metal U-shaped protrusions may be used to protect the knobs during transportation. On some amps, notably Roland models, the knobs and switches may be on top of the amplifier, at the rear of the top surface. Again, the knobs are usually recessed below the top of the wooden cabinet to protect them.
This model stands out from the rest due to its modified Explorer body shape. It’s one of the more affordable guitars with such an exotic design. However, it not only looks good but it also sounds good as well. There’s enough juice in those pups to make any amp scream. Explorers aren’t really my thing, but I can’t say that Jackson JS32T Kelly was bad when I played it. On the contrary, it’s actually quite good.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"classical & nylon guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Another aspect of the jazz guitar style is the use of stylistically appropriate ornaments, such as grace notes, slides, and muted notes. Each subgenre or era of jazz has different ornaments that are part of the style of that subgenre or era. Jazz guitarists usually learn the appropriate ornamenting styles by listening to prominent recordings from a given style or jazz era. Some jazz guitarists also borrow ornamentation techniques from other jazz instruments, such as Wes Montgomery's borrowing of playing melodies in parallel octaves, which is a jazz piano technique. Jazz guitarists also have to learn how to add in passing tones, use "guide tones" and chord tones from the chord progression to structure their improvisations.
In 1961, Grady Martin scored a hit with a fuzzy tone caused by a faulty preamplifier that distorted his guitar playing on the Marty Robbins song "Don't Worry". Later that year Martin recorded an instrumental tune under his own name, using the same faulty preamp. The song, on the Decca label, was called "The Fuzz." Martin is generally credited as the discoverer of the "fuzz effect." [18]
Stephen Ray Vaughan, known as Stevie Ray Vaughan, was an American musician, singer, songwriter, and record producer. In spite of a short-lived mainstream career spanning seven years, he is widely considered one of the most influential electric guitarists in the history of blues music, and one of the most important figures in the revival of blues in the 1980s. AllMusic describes him as "a rocking powerhouse of a guitarist who gave blues a burst of momentum in the '80s, with influence still felt long after his tragic death." Born and raised in Dallas, Texas, Vaughan began playing guitar at the age of seven, inspired by his older brother Jimmie. In 1971 he dropped out of high school, and moved ...more on Wikipedia
These soundfonts were started by converting some presets from the gig files using cdextract demo and then altered using Viena, Swami and SF2Comp. The gig files are better as they contain more samples and a better variety of presets that were not possible in the soundfont format. For instance, I could not include the Fender reverb samples as the release samples would all play at the same volume no matter where in the envolope the key was released. So, if you have a chance you would be better off to use the gigasamples. They can be used in LinuxSampler of which is free and runs on windows and linux. Some people need samples in sound font format though, so I have created these samples out of the same samples that I used for the giga samples. I also have an impulse response of the Fender Reverb that I made with voxengo for download on the Other Stuff page so you can use that if you want to get the reverb sound with the soundfonts. At the moment I use Freeverb3 for realtime impulse in windows and Jconv in linux.
The Les Paul guitar line was originally conceived to include two models: the regular model (nicknamed the Goldtop), and the Custom model, which offered upgraded hardware and a more formal black finish. However, advancements in pickup, body, and hardware designs allowed the Les Paul to become a long-term series of electric solid-body guitars that targeted every price-point and market level except for the complete novice guitarist. This beginner guitar market was filled by the Melody Maker model, and although the inexpensive Melody Maker did not bear the Les Paul name, its body consistently followed the design of true Les Pauls throughout each era.
I took a guitar to this great place to have new strings put on it. I explained to the owner that the guitar belonged to my son who had been killed in a car accident. I was donating the guitar to a pro...gram called SOAR. A program for veterans to learn to play. They are a therapy type program for any veterans. Thank you for the help I received to be able to give this guitar to this worthy program. They are great people in the guitar store. See More
While many individuals who want to become guitar technicians dream of working with big-name bands, it is more realistic to work with smaller bands first to gain experience. Local bands often need extra help with many of the technical aspects of show production. Techs may be asked to perform other tasks besides guitar maintenance, such as stage set-up and breakdown, driving the tour bus and selling merchandise. All of these activities can provide techs with invaluable knowledge regarding staging live performances.
Hohner Musikinstrumente GmbH & Co. KG is a German manufacturer of musical instruments, founded in 1857 by Matthias Hohner (1833–1902). Hohner is identified especially with harmonicas and accordions. The Hohner company has invented and produced many different models of instrument, particularly the modern melodica, and most of the harmonicas used by professionals. The company also makes kazoos, recorder flutes, melodicas, banjos, guitars, bass guitars, accordions, and ukuleles (under the brand name Lanikai), along with its one million harmonicas a year.

I've gone into a fair bit of detail here, which may be baffling to some, or may be old news to others, but I hope it cleared some of the common misconceptions about certain parts transforming tone that I have discovered in my time doing this! Truth is, upgrading your wiring is a really worthwhile modification to carry out. Replacing parts with quality components, of reliable build quality and accurate tolerances and ratings will simply be the best for your guitar. You may well see a tonal improvement afterwards which each customer of mine has reported back after fitting one of our harnesses, which is lovely to hear. But approach with the right facts, approach without the mystique of 'this vintage style pot will transform my tone' and you'll be pleasantly surprised I'm sure! There's no magic to a responsive, great guitar tone. 
And for those who don't feel ready to tackle songs yet - or just need a refresher on guitar play - "Rocksmith 2014" has 1980s-looking Guitarcade games to help you work on various skills. "Gone Wailin'!" is a "Jetpack Joyride"-esque game where you fly through the air to catch bananas; how high and low you fly depends on how loud you play. In another, "String Skip Saloon," you shoot bandits by plucking the right string. With no time to look down, you have to learn which string is which.
Like most affordable super strat guitars, the Omen-6 has a basswood body, carved into the elegant looking shape that Schecter is known for. The neck is crafted from mahogany and joins the body via a bolt-on joint. It is topped by a 14" radius rosewood fingerboard that has 24 jumbo frets. It comes setup for fast and comfortable playability, with its 25.5" scale length, 1.65" nut width and stylized fretboard markers. Giving this guitar its voice are two Schecter Diamond Plus pickups, which are passive pickups but are still hot enough for driving high-gain pedals and amps.
I just purchased a Lyle acoustic guitar in excellent condition. It's Serial # 204 and Model # 712. The top of the guitar says Lyle with a gold cross-like design up by the tuning keys. It looks like it was painted on the wood by the manufacture. The top tuning key head and neck are the color of milk chocolate with pearl-type fret inlays. The body of the guitar is a light tangerine color showing the natural wood grain under the clear lacquer finish. It has a dark chocolate bridge, and a black pick guard with a white pearl engraved inlay of a floral sprig or vine-type design. There is a set of three circles around the center opening (1 thin black line, a wide band of black and white lines and another thin black line. It has light tangerine and milk to dark chocolate stripped sides and back which is the natural wood grain showing through the clear lacquer finish. JAPAN is engraved on the back of the tuning key head in back.
POLISHING Once you have completed the wet sanding you wil have a pretty smooth surface that is almost a dull shine. You can either hand polish the finish or use a polising attachment to buff it out. Stew Mac has a polishing pad that attaches to you drill. Or you can get 6" foam bonnets from an auto parts store that will fit over the sanding disk attachment you may already have. It is best not to use any thing made from cotton because it will cut through the finish. Stew Mac also has polishing compounds that you will use in order working you way down to the swirl remover. It's on the expensive side so I use McGuires polish that you can get from the auto shop. If you use a buffing attachment make sure that you uae a different attachment for each grade of polish. Don't use the same pad for each one. Also remember to wait 10 minutes after buffing before you wipe off the surface. The lacquer gets hot and soft after buffing so give it time to cool. You will have to hand polish the cutaways, don't attempt to use the buffer on the edges of the guitar or cutaways because you will burn though the finish.
And that's a wrap. If you're new to the pedal game, don't let anyone tell you that there are no rules. There are some very strict rules that apply if you want to sound professional, and these rules quickly reduce the amount of options down to very few, indeed. The honest and realistic among us will tell you the truth that there is a very firm effects pedal order you should connect your pedals in that you don't want to stray from unless you want to ruin your tone and appear to not know what you're doing. Guitar pedal order matters!
If you see a "\n/," where n = some number, perform a tremolo bar dip. Quickly hit and release the bar to dip the note's pitch. The number between the slashes gives an indication of the pitch you should dip to - dip the pitch by "n" semitones (a semitone is the same as the pitch between two adjacent frets.)[1] For instance, "\5/" means to drop the pitch by 5 semitones, which will be the same tone as 5 frets below the original note.
You will definitely want to start slow, with an almost completely dry signal, and start adding some reverb bit by bit. Depending on the type of music you are making, that subtle hint of reverb may be all it takes to get the point across and make that track sound more organic. If you want to take things a bit further, recording a completely dry track and then mixing it with the very same section with added reverb can yield some pretty interesting results. As you have probably noticed by now, experimentation is the key here. The most important thing is to start slow.
The only guitars that I have been able to find pictures of that have the little curly thingie on the headstocks have been Kents, Kawais and some kind of no-name guitar that looks like the factory took a red Kent 820 and sprayed black around the edges to create a “redburst” finish. The example above appears to has started as a regular sunburst finish with more red and black added. The neck, headstock, pickups, and body are identical to the Kent 820 except the name ‘Kent’ doesn’t appear on the guitar anywhere. Note that the hardware on it is the same as on the 820 shown. That bridge and tailpiece configuration is a little unusual for Kent 820s. (the 820 there is mine) The bridge and tailpiece on the Kent 823 is the more common configuration.

Some of the earliest electric guitars, amps-in-cases, pickups under the bridge, fiberglass guitars, built-in electronic vibratos. Sound curious enough for you? The subject of Supro guitars and amplifiers represents a profitable avenue for exploration by collectors and enthusiasts interested in the many curious and significant byways off the guitar superhighway, which can be enjoyed without having an oil sheik’s bankroll. While National resonator guitars have received superb attention by Bob Brozman, little has been written about this mysterious corner of the Valco universe. Well, with a little help from our friends (in particular, catalogs and invaluable information supplied by Mike Newton, Jim Dulfer, and Michael Lee Allen), let’s set the record straight.
So, I’m 50+, I’ve never played a guitar, and I’m trying to decide on an electric guitar. I’m less concerned with the brand name, more concerned with high quality and workmanship, and last, I like the tone of the guitars played by the late Pete Ham of Badfinger (especially Baby Blue), and Joe Walsh. I know Ham played a cherry red Gibson SG standard, but I’m seeing quite a few mixed reviews on the quality control and workmanship of the current SGs. I listen to a lot of jam band music (i.e. Widespread Panic) and enjoy the rhythm guitar best. So, where to start and stay under $2000 to get a guitar that will produce the type of sound I’m looking for?
ESP is a Japanese company, which focused on the production of electric guitars and basses. This brand was established in 1975 in Tokyo. They produce instruments under the label of “ESP Custom Shop”, “Navigator”, “Grassroots”, “ESP Standard”, “LTD Guitars and Basses”, “Edwards Guitar and Basses” etc. Available price is Rs. 9,270/- onwards (approx). For more information, visit (Global) or (Japan).
The next most important review criteria for any electric guitar, is its sound. Please allow me to be very clear here that this guitar is mostly suited for heavy rock tones, aggressive higher leads and chugging, crazy distortions. If you are more interested in a crisp, jazzy tone, maybe you should opt for a beginner’s Stratocaster electric guitar like Squier by Fender, instead. Having said that, this instrument sounds great in its genre, and also remains in tune for long periods, so you don’t have to worry about manually tuning it. Yes, the string tension is higher as compared to a 24.75” Stratocaster or XX Les Paul, but in a way this challenges electric guitar novices to acquire greater mastery over their notes!
Every new 2008 Les Paul Standard will benefit from Gibson’s proven chambering technique, which leaves each guitar with perfect tone, balance, and weight. Prior to gluing the maple cap on top of the mahogany body, the expert craftsmen at Gibson USA carve out carefully mapped-out chambers in the body using a Computer Numeric Controlled (CNC) router. The positioning of the routes was established after careful examination of the resonant characteristics of the Les Paul. Gibson approached this process with the awareness that every change to the formula would have repercussions on the instrument’s sound. So, in addition to relieving the stress on a player’s back and shoulder, these lighter Gibson guitars also enhance the tone palette in a manner unique only to these guitars. The results are comfortable, lightweight guitars that are acoustically louder, with increased sustain and resonance.

The SG retains a similar dual-humbucker configuration as the Les Paul Standard but it truly has a life and style all its own. Due in part to its aggressive style, impressive mid-range bite and thunderous output, the SG has become synonymous with rock ’n’ roll. The Gibson SG is one of only a handful of models that has never been out of production since its introduction in the early ’60s.
The fully hollow body electric guitar is almost always a finely crafted work of art.  These instruments are a throw back to the days of hand shaped acoustic instruments of yesteryear.  The hand carved archtops and backs are designed to take advantage of pure acoustic detail, such as resonance and tone, while the electric aspect allows the performer to be amplified.  A pure traditionalist could ask for nothing better tone wise, but must contend with other aspects of these incredibly resonant instruments.
Tuner: If you’re new to guitars and playing music, there is absolutely NO way that you know how to recognize all the notes by ear and tune your guitar without a tuner. Even if someone tunes the guitar for you at the shop, it will get out of tune by the time you’re home, so this one’s an absolute must have. Hang on for the price until we discuss the next device.
This guitar comes with an undersaddle piezo pickup system and a ¼-inch output. You also get a detachable lap rest so you can comfortably play this miniature guitar. The rosewood fingerboard has 22 medium frets, while the D’Addario EJ15 steel strings ensure superior playability. This compact guitar is small enough to fit even in airline overhead compartments.
Now, none of this should take away from the actual tones, which are beautiful, even when not fully convincing.  I haven’t commented on Instant Guitar’s GUI yet and that should tell all you really need to know. It gets the job done well, but looks unfortunately ugly — or at the very least bland and not matching the high-quality of the sounds found in this line of guitar VSTs.
Gibson lost the trademark for Les Paul in Finland. According to the court, “Les Paul” has become a common noun for guitars of a certain type. The lawsuit began when Gibson suedMusamaailma, which produces Tokai guitars, for trademark violation. However, several witnesses testified that the term “Les Paul” denotes character in a guitar rather than a particular guitar model. The court also found it aggravating that Gibson had used Les Paul in the plural form and that the importer of Gibson guitars had used Les Paul as a common noun. The court decision will become effective, as Gibson is not going to appeal.[48]
{ "thumbImageID": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Natural/J46217000007000", "defaultDisplayName": "Fender American Professional Stratocaster Maple Fingerboard Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000138952", "price": "1,499.99", "regularPrice": "1,499.99", "msrpPrice": "1,500.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Natural-1500000138952.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Natural/J46217000007000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000030467", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst-1500000030467.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-3-Color-Sunburst/J46217000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030468", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sonic-Gray-1500000030468.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sonic-Gray/J46217000005000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sienna Sunburst", "sku": "sku:site51500000030466", "price": "1,499.99", "regularPrice": "1,499.99", "msrpPrice": "1,500.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst-1500000030466.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst/J46217000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030469", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Antique-Olive-1500000030469.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Antique-Olive/J46217000006000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51500000030470", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Olympic-White-1500000030470.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Olympic-White/J46217000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000030471", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black-1500000030471.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Black/J46217000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }