New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
Traditionally, the vast majority of professional engineers prefer to record electric guitars through a mic’d up amplifier, rather than use a DI (direct injection) box, even though specialist guitar DI units are readily available. That said, there are many pracitcal reasons to split the signal from the guitar and use a DI box in conjunction with an amp. If you find out later that the recorded amp sound doesn’t work in the mix, or you wish you hadn’t committed a particular effect ‘to tape’, the pure guitar sound can be re-amped and subsequently reprocessed without the need to discard a great take. You can route the DI’d signal through a modelling plug-in and blend that with the mic’d amp sound, too.
Fender’s legendary tone is enough to win just about anyone over, and they cater to a wide range of customers by offering the more cost friendly Squier series. While their classic electric guitars are favored by plenty of players, their acoustic selection and Jazzmaster offerings have their fair share of supporters as well. No matter what you’re looking for in a guitar or what price range you’re shopping in, you’re likely to find a good fit with Fender.

Madbean Pedals provides schematics and circuit boards so you can create your own pedal kits. As the creator, Brian, describes it, “I love making music and I love making things, so pedal building is a happy accident for me. Mostly, it came from being too broke to buy any gear. I owned and used only two pedals for about a decade: a TS-10 and a Digitech PDS-1000 Digital Delay. I used those for both my bass and guitar gigs. Even my drum gigs, I think. Anyway, rather than spend money I didn’t have, I decided it would be more fun to take a “peek under the hood” and see what the whole effects thing was about. That was about six years ago, and the obsession grows a little more every day! “
We've had a thread here in the last couple months about Squires, with some pretty discerning forum members praising their quality and tone. You don't need to spend a lot of money these days for a good guitar. The one the OP bought was years ago. The fierce competition in the guitar market since the economy went bad, has forced manufacturers to up their game, and recent production is of a much higher standard.
This is a more muffled bass, suited for blending in or behind distorted guitars but useful for any situation when a bass sound without so much clarity is needed. It is also a much smaller file than the rest. Originally I made this just for my own personal use but decided it might be useful to others as it fits some pieces where the washburn bass doesn't.

I’m also going to go out on a limb and suggest the earliest Univoxes also included the ‘Lectra, a version of the one-pickup Aria 1930 violin bass (made by Aria). These were basically violin-bodied basses originally inspired by the Gibson EB-0, and popularized among imports by Paul McCartney’s use of the Höfner violin bass, copied by EKO. This was a hollowbody with no f-holes, Cremona brown finish, single neck pickup, bolt-on neck with position dots along the top of the 22-fret bound rosewood fingerboard. Strings anchored to a covered bridge/tailpiece assembly.

You have 6 strings that are always made of metal. Then you have a number of pickups - these are actually magnets. Sometimes you can see a round magnet under each string. When a metal string vibrates over a magnet, a current is produced; this current is what ends up being converted into sound waves, but it is very weak. Thus you have to send it through an amplifier.
Used as a send effect, a resonant filter can be used much more creatively than as an insert.You get very different results from your filtering depending on where you put the filter in the signal chain. To introduce some real movement into delay lines, for example, place sweeping low-pass filters before the delay. You then get the movement of the dry sound contrasting with the movement in the delay line. If both the filter sweep and the delay lines are tempo-sync'd, you can create interesting effects where the filter appears to be moving up and down at the same time.
Once you have the essential elements in place-a great amp, guitar, and guitarist-you almost can't help but get a great guitar tone. Crank the amp up to the appropriate level and begin with some mic comparisons. It's especially telling to audition different types of mics: for example, dynamics, ribbons, and large-diaphragm condensers. (I rarely use small-diaphragm condensers for miking guitar amps; on the other hand, I've found that almost any microphone will strike gold once you find the right spot for it.)
This is a great local shop. I bought a new Floyd Rose bridge for one of my electric guitars and brought it to Franklin Guitar to be installed and set up. I got the guitar back within 2 days and it plays so well that I brought them my other guitar for a set up the next day. Again, within 2 days I had it back and it plays exactly like the other one...awesome. I had both guitars set up for a little more than half of what another shop quoted me just to install and set up the new bridge on the one. High quality work at a fair price in a reasonable time...I won't go any where else to have my guitars worked on. They also have a good inventory of guitars and amps for sale to fit any budget.
Almost every guitar you see on our website is available in our Chicago guitar showroom. While we carry hard-to-find, top of the line vintage guitars, Rock N Roll Vintage Guitar Shop also carries new guitars and basses from Fender (Squire), Martin, Seagull, Lakland, Hofner, Kay, Hanson, EGC, and other top brands. You can also find top of the line amps including Ampeg, Analog Outfitters, Divided By 13, Fender, Hi-Tone, Laney, Magnatone and Orange to name a few.
One look at its distinct bowl-back body, and you already know that the Ovation Applause Elite AE44II is not your average wooden guitar. This distinct back is crafted from Lyrachord, the same material which is said to be used in helicopter blades and more. This results in a lightweight instrument that's not as fragile as wood. Still it does come with a solid spruce top and other wooden components, so it doesn't sound or look too out of the ordinary. Finally, the guitar comes equipped with an undersaddle piezo and preamp system, which features a 3-band EQ and built-in tuner.
Hello. I am trying to find out more about my Hohner electric guitar. I've been trying to research it online but cannot find ANY information or reference to this particular model. Some people have told me that it may have been a prototype sample that never went into production. The only reference number I can find on the guitar is a label that says Sample by Nanyo CG300G and Made in Japan. I bought this guitar around 1980-1982 when I was 13-15 years old and it is still in mint condition. I would really love to know more about it's origin.

Tube or solid-state? One has the nice warm vintage tone, but the other is just so much simpler and free of hassle. Vox make one of the best hybrid amps, which heats up your guitar signal with a proper 12AX7 tube in the preamp before it becomes amplified by conventional transistors to deliver up to 30 Watts. A warm tone with smooth overdrive, but without the aggravation.

We’re bookending this article with two Epiphone guitars. Why? Because Les Paul was the man. And G-400 Pro was actually a successor Les Paul model from ’61 to ’68, making this guitar a true icon of rock, power, and endless sustain. With a mahogany neck and rosewood fretboard, this guitar has the looks and, with Alnico Classic Pro humbucking pickups, the tonal quality is excellent. 

Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
Read Full Review If you’re looking for a lightweight guitar aside from a Stratocaster. You prefer the quality of tone produced using humbuckers than a single-coil can deliver. This SG model from Epiphone meets that requirements on the overall sound, playabilty and price that fits the under two hundred dollar budget of a beginner. As well as for seasoned players looking at the market for an affordable studio or back-up guitar to bring on stage.
Music enthusiasts can find a wide range of new and used guitar amplifiers on eBay, often for deep discounts.  Buyers who want to explore a wide range of possibilities should simply enter the keywords "guitar amplifier" into the eBay search bar, while those with more particular needs can refine their search by adding keywords associated with the make and model of the amplifier, as well as its color or condition.  The "ask the seller a question" feature will enable the buyer to ask additional questions pertaining to style, sound, and condition (if the guitar amplifier is used).
The Epiphone ES-335 Dot was the world's first semi-hollowbody electric guitar, introduced in 1958. Today, it's made by Gibson, but it is still prized by jazz and blues musicians looking for a classic sound. Setting up the Dot involves adjusting the truss rod to correct for any underbowing or overbowing of the neck because of humidity changes. The bridge saddle on the Dot may also be adjusted to get the right distance between the string and the fretboard, called the “action.”
As one of the best electric guitars under 200 dollars, the instrument utilizes an agathis body, a bolt-on maple neck, a sonokeling neck, and a classic rosewood fingerboard with 22 frets and white dot inlays. The electronic section features a peculiar combination of one humbucker and two single pickups, allowing the guitar to cover plenty of sonic ground.

• We'll add EQ to give some polish and let the guitar cut through a little better in a mix. Enable a stage in the standard channel EQ (which comes after the inserts in the signal chain), and choose the Parametric II response. Add a boost of around 4‑5dB at 3.5kHz, with a Q of 0.2.This screen shows the VST Audio Channel Settings and the roster of effects used to create our basic guitar rack.
I bought my 10 year old son a digitech RP355 multi effects pedal to use. It's cheap and simple to edit patches for different sounds and you can download patches to get the sound used in some popular songs but the thing I like best about it is the amplifier emulation. After using it for a while my son found he liked the sound of Vox amps so we bought a AC4 and it sounds great. I liked the fender deluxe and bassman amps so I had a deluxe amp circuit built by a local amp guy. Later on you will find that you want to move on to real pedals as they sound better so a multieffects pedal is a good way to sample a lot of different effects in one package. Most multi effect pedals have a sampling function so you can record a short song segment and then the unit will replay it while you solo along. Some also have the ability to record from an outside source and then play it back at slower speed so you can learn tricky licks. Lastly, most units have drum tracks which is a great way to play along and stay on time.

The 2019 Gibson Les Paul Standard sports a mahogany back with an artisan-grade AAA figured maple top and a mahogany neck with Ultra-Modern weight relief. This chambering technique is provides a solid core through the center of the guitar, retaining the classic Les Paul sound and making the guitar less prone to feedback. The Ultra Modern weight-relieved body also makes playing long sets a breeze. The neck has an asymmetrical Slim Taper neck profile for increased playability and comfort.

I always recommend spending a little more money in the beginning. If you start with a complete bottom of the line starter guitar, you are going to want to upgrade within a few months. So I recommend getting a more midrange priced guitar between $350-$800. It will be cheaper in the long run and if you decide playing guitar isn't for you, you will find it much easier to sell the nicer guitar.
Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.
The HSS pickup configuration with a five-way switch keeps things versatile and beginner-friendly. Two single-coils and an overwound bridge humbucker provide a good mix of glassy Strat-like and fat Les Paul-esque tones that are capable of straight-up rock, funk and blues. They’re good as far as in-house pickups go, but don’t expect tonal authenticity at this price point.
We used to see and hear Al Di Meola performing his big instrumental hit "Mediterranean Sun Dance" either with unforgatable Paco de Lucia or with his band's members. This time he performed it in duet with Antonio Sánchez, young flamenco guitarist born in Madrid, nephew of Paco de Lucia and Ramón de Algeciras and cousin of J.M. Bandera, who spent four years touring the world...
I agree that you should spend more on the guitar than the amp, but if you have a nice guitar and a cheap amp, you aren't giving the guitar enough width and breadth of tone capabilities to warrant spending $1500 or more on a guitar. So, if you're going to spend over $1200 on a guitar, don't buy a lousy amp. A Peavy 30 is a decent amp, but is short on breadth of tone as compared to a Fender Deluxe Reverb 22 watt. Marrying the guitar and amp is an important part of the process, they are symbiotic. My advice, as a player for over 40 years is to buy as good a guitar as you can. For beginners, a bad guitar will not get you playing, in fact, the most common reason young novices stop taking lessons is that the cheap junker they got is unplayable, even by professionals. It's hard, not fun, seems like a world of work and they quit. That's not how it's supposed to be. It's a fun thing, so get out there, get a good playable instrument and you are on your way to a lifetime of good times.

The acoustic solos Reinhardt recorded with the Quintet of the Hot Club of France between 1936 and 1940 are simply astounding displays of virtuosity, melodic taste and speed that left indelible impressions on players throughout several generations, including Les Paul, Jimmy Page and Michael Angelo Batio. Django didn’t even need all four fretting fingers either, using only two left hand fingers to play complicated chords and hyperspeed solos (his third and fourth fingers were badly burned in a fire).

Boasting the title of the “world’s largest guitar manufacturer,” Fender is responsible for the creation and production of a number of the most iconic guitars ever conceived. The one Jimi Hendrix set on fire on stage? That was a Fender Stratocaster – similar in shape to the one pictured above. The one Bruce Springsteen plays at every concert? That’s a Fender Telecaster. Look at nearly any band on stage around the world and the likelihood is you’ll see a Fender guitar up there. And that’s no accident. Founded by Leo Fender in Fullerton, California in 1946, this brand hasn’t just pioneered iconic looks – they pioneered iconic sound. And that’s what keeps musicians like Eric Clapton, David Gilmour of Pink Floyd, and Jeff Beck so viciously loyal to the brand: unrepentant quality.
In 1960, Gibson experienced a decline in electric guitar sales due to their high prices and strong competition from Fender’s comparable but much lighter double-cutaway design, the Stratocaster. In response, Gibson modified the Les Paul line. This 1961 issue Les Paul guitar was thinner and much lighter than the earlier models, with two sharply pointed cutaways and a vibrato system. However, the redesign was done without Les Paul’s knowledge. Although pleased with the sound, he asked Gibson to remove his name from the instrument until they fixed a design issue with the neck.[18] This separation occurred in 1960, but Gibson had a surplus stock of “Les Paul” logos and truss rod covers, and so continued to use the Les Paul name until 1963. At that point, the SG guitar’s name was finally changed to “SG“, which stood simply for Solid Guitar. In addition to the SG line, Gibson continued to issue the less expensive Jrs and Specials (and the Melody Makers) with the newer body style. These, together with the Firebird, were the standard Gibson solid-body models until the reintroduction of the Les Paul Standard Goldtop and the Les Paul Custom guitars to the market in 1968.
The Mahogany body and neck with rosewood fretboard makes it a highly resonant and great sounding guitar whilst the dual Alnico Classic pickups with push pull coil tapping provide a world of tonality. A SlimTaper D Shape neck profile makes it comfortable for beginners to learn on, whilst pro players will enjoy the ergonomic design 2 hours into their set or rehearsal! Available in more finishes here.
View tab notation as a representation of the guitar's strings. A tab is usually written using six horizontal lines, each corresponding with a string on the guitar. The bottom line represents the lowest, thickest string, while the top string represents the highest, thinnest string. For standard tunings, this means that the lines will represent, from the bottom up, the low E, A, D, G, B and high E strings.
We have already covered one Behringer reverb, which was the epitome of affordable and functional simplicity. However, this brand has a couple more aces up their sleeve, including the more advanced RV600 (click for full review). What this pedal offers is a significantly more versatile solution that brings you additional flexibility at a bargain price.
As one user put it, this is one of “Amazon’s hidden little gems”, with a good set of tube electronics that gives out a natural sounding overdrive and some crystal-clear rhythmic sounds. If you want to make your guitar sound clear enough to accompany Porcupine Tree while also having the option for a natural grainy sound that might work well for jazz and blues, then this item is definitely something to look into.  
When Jimi Hendrix came on the scene in the late 1960s, he was like nothing anyone had ever seen before. His ability to use volume, feedback, wah pedals, and other sonic devices to their maximum effect was awe-inspiring. Eric ‘God’ Clapton saw Hendrix for the first time and thought he would be the end to his career. There may be more technically impressive guitar players, but it’s hard to find anyone who played with more adventure or spirit than James Marshall Hendrix.
First, plug your guitar in and toggle all the switches and knobs. If your guitar still plays fine, the connection problem is internal. Second, for non-Stratocaster style guitars, remove the cavity covers on the back of the guitar. Strum the strings and move the wires that are soldered to the switches, pots, and output jack. You will probably find your loose connection when the guitar cuts out again. For Stratocaster style guitars, you will need to remove the pickguard and manually check each connection point to make sure the solders are solid. Third, re-solder the loose wire and screw the cavity covers or pickguard back on. For more information about how to solder wiring, see the soldering page.
Gretsch was founded in 1883 in Brooklyn, with their biggest boom coming in the fifties and sixties, at the birth of rock n’ roll. Famed for making hollow and semi-hollow models, their guitars were used by icons including Chuck Berry, Chet Atkins, Bo Diddley, and George Harrison. Since 2002 the production side of things has been run by Fender, although the Gretsch family still own the company.
These pedals are different, but are both based on the same idea. Pitch shifters shift the whole pitch of your guitar up or down by a set amount (often an octave), giving you a higher or lower tone than would normally be possible. Jack white uses a Whammy pitch shifter in the solo for Seven Nation Army, which has a foot pedal that rocks back and forth (similar to a wah pedal) allowing you to go up and down a full octave or more smoothly and quickly.

In the ever-changing world of jazz music, you shouldn’t be surprised to hear of some big changes to the jazz guitar market either! To reflect this we’ve tweaked our chart, removing a couple of models such as the Ibanez AF95FB and the D’Angelico EXL101, and adding five new six-strings. These comprise the faithfully reproduced Epiphone Masterbilt Zenith Classic and the thinbody LH-302T from The Loar. In the semi-hollow section, we added the Ibanez AM93AYS Artcore Expressionist and the beautiful Hagstrom Tremar Viking Deluxe, while the solid-body section saw the arrival of Fender’s Classic Player Jazzmaster Special.

The origins of the modern guitar are not known with certainty. Some believe it is indigenous to Europe, while others think it is an imported instrument.[32] Guitar-like instruments appear in ancient carvings and statues recovered from Egyptian, Sumerian, and Babylonian civilizations. This means that the contemporary Iranian instruments such as the tanbur and setar are distantly related to the European guitar, as they all derive ultimately from the same ancient origins, but by very different historical routes and influences.

Even when using noise-cancelling pickups, guitars tend to be relatively noisy sound sources, especially when used in conjunction with high levels of overdrive, either from a pedal or an amplifier. High levels of gain are needed to produce overdrive sounds, so any source noise will be increased accordingly. If an attempt is going to be made to remove some of the noise by electronic means (such as a gate, expander or single-ended noise-reduction unit), it may be best to leave this until the mixing stage, so that an incorrectly set gate or noise filter doesn't ruin a good take. However, gates should be used before delay or reverb effects to prevent the tail end of the sound being shut off abruptly when it falls below the gate threshold. If you simply have to record with delay effects, a dedicated guitar gate pedal placed before the delay unit will probably work best. If you are also using an overdrive pedal, then the gate should come after this so that it can deal with circuit hiss as well as hum from the guitar pickups. Note that all-in-one floor units tend to include gates at an appropriate point in the signal path, between the overdrive/amp section and the effects.
“I was getting really bored with this guitar sound—or lack of an interesting sound,” Davies remembers. “There was this little radio spares shop up the road, and they had a little green amplifier in there next to the radios. An Elpico. I twiddled around with it and didn’t know what to do. I tried taking the wires going to the speaker and putting a jack plug on there and plugging it straight into my AC30. It kind of made a weird noise, but it wasn’t what I was looking for.
In 1962 or 63 (possibly as early as 1959) Guyatone guitars began arriving in the U.S.. If you look around the internet you will see that they could be found under a variety of brand names and were sold in drug stores, department stores, even auto parts stores, as well as music stores. There were two lines of Kent guitars: a Standard series and a “Pro-series”. They were made by Teisco and Guyatone. I haven't been able to get my hands on any of these early solidbodies so I don't know if "the Professional Group" guitars are actually worthy of the "professional" designation and slightly higher pricetag or if it was all about marketing.

Unlike the guitars we have mentioned so far, the Taylor BT2 Baby Taylor is a travel guitar. In other words, it's a 3/4 scale size of a standard dreadnought, making it easier to play for a lot of us. The top wood is a solid mahogany piece while the back and sides are made of layered Sapele. The use of laminate wood is one of those friction points which many purists like to point out to. However, the way Taylor builds these guitars, you really won't hear a difference. In this case it's only a visual difference, and a fairly attractive one at that.

Fender, or the Fender Electric Instrument Manufacturing Company, as it was properly known, was started in 1946, in Fullerton, California, by Leo Fender. The early designs effectively wrote the book on the solid body guitar manufacture; his approach of simple guitars using quality parts, easily assembled (most specifically the replaceable neck) proved an immediate sucess. Guitars like the Fender Stratocaster, Telecaster, Jaguar and Precision bass have barely changed since their very first inception; Fender simply got it right first time round.
Ibanez 12 string Martin style, vintage Natural High Quality Japanese Ibanez Vintage Guitar ....This example is MODEL# V302 ...And it IS ANOTHER great find this one is in a Natural finish and is a REAL GEM ta-boot and it has a Beautiful aged Premium Solid German Sitka Spruce Top, WoW! what a nice glass like original finish to this one ...again High Grade woods used on this 80's Ibanez AAA Mahogany Sides-Neck & Back "see quality og the grain in the pics" . Lots of volume & is full-and rich tone from this baby.Pics show missing string done while we were cleaning her up they just snapped ... obviously old and so this guitar will come with a brand new set of Martin strings installed for the new owner no worries..... this one is ez to play & stays in tune well. It is a crafted in Japan guitar and it compares favorably to Gibson, Guild or Martin... at a fraction of that cost. Note: we also have a Sunburst V302 in stock in our listings please see that if you prefer the guitar in sunburst. Thank you for your interest, Joe.
On August 21, 1965, during a Beatles concert tour, Randy Resnick of B-Sharp, aMinnesota music store, presented Harrison with a second model 360/12 FG “New Style” 12-string electric guitar, distinguishable from Harrison’s first 12-string by its rounded cutaways and edges. There was a television documentary produced by KSTP TV in Minneapolis documenting this event.

Talk box: A talk box directs the sound from an electric guitar or synthesizer into the mouth of a performer using a tube, allowing the sound to be shaped into vowels and consonants with movements of the mouth. The modified sound is then picked up by a microphone. In this way the guitarist is able create the effect that the guitar "licks" are "talking". Some famous uses of the talkbox include Bon Jovi's "Livin' on a Prayer", Stevie Wonder's "Black Man", Mötley Crüe's "Kickstart My Heart", Joe Walsh's "Rocky Mountain Way", Alice in Chains's "Man in the box" and Peter Frampton's "Show Me the Way".[66][67]

Gibson ES-335 Figured Electric Guitar The Gibson ES-335 thinline archtop semi-acoustic electric guitar is a popular choice among blues, rock and jazz musicians because of its warm tone and near-zero feedback. The 2019 Gibson ES-335 Figured model features a thermally engineered chambered maple center block, a hand-wired MTC Premiere control assembly, an ABR-1 bridge with titanium saddles and all-new MHS II humbucking pickups.
{ "thumbImageID": "PR-4E-LE-Acoustic-Electric-Guitar-Natural/L19965000002000", "defaultDisplayName": "Epiphone PR-4E LE Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000214448", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "249.00", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-4E-LE-Acoustic-Electric-Guitar-Natural-1500000214448.gc", "skuImageId": "PR-4E-LE-Acoustic-Electric-Guitar-Natural/L19965000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000214447", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "249.00", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-4E-LE-Acoustic-Electric-Guitar-Vintage-Sunburst-1500000214447.gc", "skuImageId": "PR-4E-LE-Acoustic-Electric-Guitar-Vintage-Sunburst/L19965000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000214446", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "249.00", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-4E-LE-Acoustic-Electric-Guitar-Ebony-1500000214446.gc", "skuImageId": "PR-4E-LE-Acoustic-Electric-Guitar-Ebony/L19965000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

The classical guitar repertoire also includes modern contemporary works – sometimes termed "New Music" – such as Elliott Carter's Changes,[17] Cristóbal Halffter's Codex I,[18] Luciano Berio's Sequenza XI,[19] Maurizio Pisati's Sette Studi,[20] Maurice Ohana's Si Le Jour Paraît,[21] Sylvano Bussotti's Rara (eco sierologico),[22] Ernst Krenek's Suite für Guitarre allein, Op. 164,[23] Franco Donatoni's Algo: Due pezzi per chitarra,[24] etc.
I’ve been keeping track of completed Ebay sales since I started looking at Kents, and have come up with a few average sale prices. The way I figure an average is by first tossing out the highest and lowest sales. If I am left with fewer than three sales I don’t bother. That’s too small a sampling to be worthwhile, otherwise I take the average of the rest. The table below will only be updated when there is a sale that results in a change, so if the table looks like it might be dated, it’s probably because there haven’t been any sales that affected the numbers. Availability of Kent guitars on Ebay seems to ebb and flow.
At one point, Fender switched to producing guitars with the bridge pickup located farthest from the highest-amplitude portion of the vibrating strings, slightly “over-wound”, thus increasing the signal output from that pickup. Even more overwound pickups (“hot-wired” designs) became popular, either for all three pickups (a “hot” configuration), or for the bridge position only (so-called “Texas Hot” due to its popularity among Southern Rock guitarists).
Size & Weight: If the multi-effects pedal will stay in one place at all times, then perhaps size and weight is not a big deal. However, one of the biggest selling points of a unit like this is its portability. If you need to gig with it or simply take it to a friend’s house, make sure you’re fine with its dimensions. The good thing is that a manufacturer like Line 6 makes several versions of the same basic pedal. The Line 6 M13 is a great unit, but if you need it to be more compact you can opt for the M9, or smaller yet the M5.
The stompswitches take a couple stomps to cut on. There also some tape residue around the led lights where someone covered them. But its not a huge issue for reverb considering that the way I play, I always have a little reverb on to add texture and presence to my tone. Also, if you have a pedal switch looper that you can run all your pedals through it can stay always on that way too. But I'm going set the bidding price lower just because they don't work 100% properly and the tape residue. Other than the issue with the stompswitches the effect works great. Just clarify, you have to stomp on the switch 2 or 3 times and it cuts on.
Originally, distortion of the guitar signal happened accidentally when tube amps were turned up too loud. While distortion was first considered undesirable, players soon came to recognize that a distorted signal increased the amount of sustain they could get out of each note. This essential discovery created a fundamental shift in guitar soloing styles to include extended notes such as those produced by a wind instrument or organ. Used on rhythm guitar parts, distortion thickens up the signal and allows for a much heavier, chunkier sound.
-Would be nice to edit the string colors, add training modes telling you which finger to hit the note with, how many times to play through a sequence (so you learn/memorize the song, vs just respond to the game - i.e is the chorus sequence repeated 4 times before moving onto the next part of the song?),indicating strumming patterns to help with timing (newbies tend to down pick everything and just pick faster when the notes are closer vs switching to an up-down strum) etc.
The D-120's all-mahogany body strays from conventional spruce top design, which results in a warmer and more articulate tone. This particular tone is ideal for guitarists who sing, and for those who accompany vocals, it also blends well with conventional spruce top acoustic guitars, easily cutting through the mix with its lower-mids emphasized voicing. And since the body is crafted from solid mahogany, you can be sure that the instrument grows with you, sounding better with age.
Heat-treated Maple is used for the AZ's neck construction. Its use increases the wood's stability, durability, water resistance and tolerance of temperature changes. After extensive prototyping and trials, we concluded that 20.5mm thickness at the 1st fret to 22.5mm at the 12th fret is the optimal neck thickness for this process. The neck is sealed with an oil finish (sealer coat) which feels similar to a comfortable well-played guitar neck.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: left handed electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
This bass guitar amplifier features a 20-watt amplifier and an 8-inch driver. It reproduces frequencies from 70 Hz ~ 10 KHz with a total harmonic distortion of 0.5% (typical). It also has a built-in, switchable active compressor. It features a 3-band EQ, with the bass EQ centered at 100 Hz, mid-range EQ at 800 Hz, and a treble EQ at 6 KHz. It features a 3.5mm line output with an impedance of 1 kilohm, for directing the output signal to a mixer, recorder, or another amp. The 3.5mm stereo headphone output will defeat the internal speaker for quiet practicing.
Get superior guitar tone and flexibility using this 15-Watt, 1x12 Guitar Combo Tube Amplifier with Celestion Speaker & Spring Reverb from Monoprice! As the title indicates, this guitar amplifier features a 15-watt tube power amplifier and a Celestion brand speaker. It uses three ECC83/12AX7 preamplification tubes and two EL84 power tubes for the amplifier section, plus a Celestion Red Truvox 1215 speaker. The EL84 tube is the tube that powered the Mullard amplifiers favored by the British Invasion bands of the 1960s.

Not the first commercially available flanger pedal, but probably the first that really worked properly with the full sonic depth of the effect, the A/DA Flanger was made possible by the advent of the SAD1024 chip (others were used through its lifetime, depending upon availability). It hit the shelves in 1977, and was shortly followed by Electro-Harmonix’s equally beloved Electric Mistress, and MXR’s big, gray Flanger. Nearly every big maker slapped its own flanger on the butt and sent it toddling down the pike within the next few years. These were serious pedals in their day, the big boys requiring their own regulated onboard AC power stage to run all that thirsty silicon. Most required a serious investment on behalf of the impoverished guitarist, too. A/DA’s unit retailed at $199.95 when introduced, and others went for even more. Not a steal, when you consider that minimum wage was $2.30 an hour in 1977. 

This is easily the most popular category of effect, and sonically is the natural first-step away from the thin sound of a straight, clean amplified guitar. If a player only owns one pedal, chances are it’s a distortion, fuzz, or booster box, and plenty of players have collections of several or even dozens of units from this genre, and use two or three at a time on their pedalboards for different colors and textures and levels of sonic sizzle. Yep, of the players who want to change their guitar’s pure sound in the first place, more probably want to filth it up than all of the other options combined.
Artwork: Improved Fender pickups from 1944. 1) A general view of a guitar with the pickup shown in blue and the strings colored orange. 2) An end-on view (looking down from the head toward the bridge) shows one version with a single pickup coil (green) spanning all six strings. 3) Looking from the side, you can see how the strings thread through the pickup coil. 4) In an alternative design, there are six separate pickup coils, one for each string. From US Patent 2,455,575: Pickup Design for Instruments by Clarence Leo Fender and Clayton Orr Kauffman (filed September 26, 1944, issued December 7, 1948). Artwork courtesy of US Patent and Trademark Office.
Larry Robinson Fine Custom Inlays - They produce one-of a kind shell inlays for all kinds of guitars. One of a handful of inlay practicioners in the country, Larry has done exquisite work for major guitar manufacturers (Fender, gi bson, Yamaha,...), small production shops (Santa Cruz, Collings, etc.), single luthier shops (Klein, Ryan, Olson, Megas, and more), collectors like Tsumura and people who just want something to personalize their guitar.

The GK Studio mixes traditional flamenco construction techniques, a comfortable body shape and modern Fishman electronics, resulting in an easy to play nylon-string guitar that can be plugged in for stage use. My main concern about this guitar is its slightly thinner body depth, neck and nutwidth(1.96"), but these are calculated tweaks that should make this classical guitar play and feel more akin to conventional steel-string acoustics.

1. Blackstar ID:15 TVP ($229): This is one of the best combo amps on the market and with good reason: it comes with a variety of options to not only get you playing in no time. It also allows you to record very easily with a built-in USB option. You can select from six different power responses modeled after popular tube amp sounds (via Blackstar’s True Valve Power system) and even when turned down, the amp doesn’t lose its bite. The built-in multi-effects allow you to experiment with the world of effects and the Insider Software allows you to edit up to 128 user storable patches to further your sonic crafting.
Electronics kit building kind of fell out of favor during the computer age as the home based technology enthusiasts moved to assembling PC’s, and software development. But home brew electronics has enjoyed a resurgence in recent years in what is now called the maker community. Internet electronics stores such as Adafruit and Element 14 are enabling 21st century geeks to build anything from simple circuits to complex embedded computing projects. These sites provide documentation, tutorials, video channels, and of course, a store, where you can purchase the tools and components required to internet enable your toaster, or feed your cat from the couch.
The first recording of an electric guitar west of the Mississippi was in Dallas, in September 1935, during a session with Roy Newman and His Boys, an early Western swing dance band. Their guitarist, Jim Boyd, used his electrically-amplified guitar during the recording of three songs, Hot Dog Stomp, Shine On, Harvest Moon, and Corrine, Corrina.. An even earlier Chicago recording of an electrically amplified lap steel guitar was during a series of sessions by Milton Brown and His Brownies (another early Western swing band) that took place January 27-28, 1935, when Bob Dunn played his amplified Hawaiian guitar.
First, Steel String sounds heavenly, and I always love it when my mouth drops the first time I hear a hyper-realistic sounding VST. Steel String has done this completely, in fact, the only time I was ever pulled out from its hyper-realism was on the fret noise that recreates the articulation of finger sliding across the strings when changing positions.

I recommend you buy your pickup new, and from a place that you trust. I am getting more and more unsatisfied with Musician's Friend(everything I order is backordered...) so after being informed that my pickup was going to be in stock three weeks from when I wanted it, I canceled the order, bought the same pickup at Guitar Center(online) and it came in by the end of the week. 

The neck contains a metal truss rod that prevents it from bowing and twisting due to string tension and environmental factors. Adjusting the truss rod corrects intonation issues that prevent the instrument from being tuned properly. This truss rod can be adjusted either at the headstock, or just inside the body of the guitar, at the base of the neck.
We answer this with a resounding, “Yes!” While electric guitars depend solely on pickups to be heard and to change or distort sound, acoustic electric guitars just provide the ability to amplify the sounds of an acoustic. The acoustic electric guitar construction is still built the same way as an acoustic but with pickups added in the design. You now have the ability to play plugged-in to amplify the natural acoustic harmonics of your tonewoods, or you can play unplugged when jammin’ it at a Summer bonfire.
This acoustic-electric parlor style guitar features a solid cedar top and solid sapele back and sides, premium appointments that other builders will require you to pay top dollars for. And it features old school parlor style body shape, which gives the instrument a vintage appeal, and blues box style tone with emphasis on the middle frequencies. This makes it ideal for blues, folk and old school comping, a good contrast to regular sized acoustics in a mix.
With 24 amp models including a digital chromatic tuner, 9 stomps boxes, 4 amps, 5 cabs, 3 mics, and 2 rack effects; AmpliTube Custom Shop is a great way to get your hands on IK Multimedia's great guitar simulation software. As the name suggests, in addition to the free units you can purchase more effects units from right inside the plugin to build your own custom guitar shop.
Lastly, Capacitors. Now this one is a vast subject matter to cover as there is so much debate about which is the 'best', which is the most 'vintage correct' etc. If you're a member of any guitar forum, I'm sure you've encountered many a thread about this too. There's an awful lot of cork sniffing about this subject, it's pretty bad! but I'm going to keep it as civilized as I can sticking to facts and my findings/experiences.

I was paging through my daughter's Rolling Stone Magazine today and saw a small article with three different artists that use Harmony Guitars and they were singing their praises. I'm an old dude (or shall we say vintage)who's not familiar with all of the new bands popping up today, so I can't even tell you who these artists are. However, I did find it interesting that Rolling Stone did a spot on these guitars. I was too young to get my hands on many Harmonies when I was a kid, so I can't comment on their quality, but I know they were budget guitars and weren't considered anything special back then.

Why We Liked It - Even if this isn’t the cheapest guitar on our list, we think the Schecter Hellraiser is the best bargain! To get this much guitar for so little money is almost incomprehensible and we feel like a million bucks when we play it! It not only looks good, it sounds fantastic, and you can be sure to impress everyone who hears you play with this wonderful instrument!
Who among us doesn’t relate to Nigel Tufnel in This Is Spinal Tap when he tried to explain to “Meathead” that having an 11 on his amp made it louder than – and hence superior to – one having a mere 10? That’s just how I felt back in the day when, after nearly two decades of owning one – that’s only one – guitar, a classical, I decided I ought to get an electric guitar again. Who could have known how slippery that slope would turn out to be?!

The MC5 was founded by guitarists Wayne Kramer and Fred “Sonic” Smith, friends since their teen years and veterans of the Detroit garage rock scene. They honed a two-guitar attack that owed much to the heavy rock sounds being popularized at the time by acts like Cream, the Jimi Hendrix Experience and Led Zeppelin. But Kramer and Smith laid down their riffs with more reckless abandon and a greater sense of desperate urgency than any of those groups.

Note: as of November 2004, the serial number represents not necessarily the year the instrument was produced but rather the model year to which the instrument belongs. It has long been Ibanez's practice to begin production for the subsequent model year in November (or even late October), but the serial numbering change that was implemented in November 2004 acknowledged and formalized this practice.
The way Kristin Hersh rubs major and minor notes next to each other in her intricately plotted songs is truly haunting; a ghostly approach that didn’t even require selling her soul at the Crossroads. Blending plucky arpeggios and bluesy slides with punishing strumming, Hersh’s playing has actually gotten more aggressive as she’s eased into her 40s with 50 Foot Wave.
After lowering the bridge (usually in a failed attempt at getting lower string action), the owner will eventually realize this is not the best solution. When this happens and a neck reset is preformed, the original bridge will now be *useless* (because it is too low!) The repair guy won't reset the neck to a low bridge, so a new replacement bridge will be installed. At this point the originality of the instrument is compromised.
The best way of working out which contact is which is to use a multimeter and see for yourself which contacts are connected to each other in the 5 switch positions. On the Fender-type and some import-type switches you’re given a good clue because you can actually see the mechanism or see through the switch casing. Watch this as you move the switch through the 5 positions – you can see which contact is always in circuit (the wiper) and which ones are in circuit in each position (1, 2, 3, 4 and 5). This method of visualising the switch also helps when it comes to fitting the switch to your pickguard and getting it the right way around! Now, where does the wire from the bridge pickup go again…
Family Owned and Operated, Lamb's Music has been serving the musical metroplex for over 30 years. Offering warranty on almost every brand of stringed instrument, Lamb's Music has been the go-to spot for repairs and customizations for companies like Guitar Center, Gibson, Gretsch,Taylor Guitars, and Fender Musical Instruments as well as many others.  
PRS started off in the 1990s. At that time, it seemed Les Pauls were being swapped in favor of a PRS guitar. PRS leveraged this opportunity to continue the trend, making PRS more accessible to all. Hence, they launched another line of product with affordable price tags – the SE guitars. Nonetheless, one cannot consider SE guitars as the beginner’s guitars, since they all flaunt with high-end specs like other instruments. Through these guitars, one gets an opportunity to enjoy playing a pro guitar without causing a blow to your budget.
The microphone set up I described earlier will give you a similar effect. The close mic gives you great detail (in audio terms, top-end, treble) and warmth. The mid-distance mic will give you the perspective that the amp is in a room, but without too much loss of detail. The far mic will tell you in no uncertain terms that you are definitely in a room, and with any luck, the listener's brain will process that information and tell the listener what size the room is (I'm not talking exact measurements here--just rough approximations). There will be a fairly significant loss of detail though. The combination of any of the mics will give you varying degrees of perspective and detail.

Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.

Gibson announced the new 2012 Les Paul Standard at Winter NAMM 2012. The new Standard features two Burstbucker Pro humbuckers with coil splitting, and Pure Bypass. Pure Bypass gives the option of bypassing the volume and tone potentiometers, sending the signal directly from the bridge pickup to the output jack. The 2012 Standard also features Gibson’s “modern weight relief” as opposed to the chambered body of previous Standards. Other changes include a phase switch and compound fretboard radius.
While electric guitar manufacturers like this are often more expensive, they do provide a level of customization that isn’t available with several mainline models. Most companies of this size can have a casual email or phone conversation with you, take a few notes about how you want your guitar setup (probably jotting it all down with pen and paper) and then making a guitar to your exact specifications.
An effects unit or effects pedal is an electronic or digital device that alters the sound of a musical instrument or other audio source. Common effects include distortion/overdrive, often used with electric guitar in electric blues and rock music; dynamic effects such as volume pedals and compressors, which affect loudness; filters such as wah-wah pedals and graphic equalizers, which modify frequency ranges; modulation effects, such as chorus, flangers and phasers; pitch effects such as pitch shifters; and time effects, such as reverb and delay, which create echoing sounds.[1][2]
This is a really cool program. It let's you fiddle with a lot of cool effects, without having to spend a lot of money. The program works really well, after a bit of fiddling with the Jack server, and it far exceeds some of the commercial programs I have tried. I hope that this project gets some attention :) If I wasn't a "coding dyslexic", I'd be the first to sign up.
It helps if you shop frequently but at my Guitar Center the tech is frequently going through guitars on the wall and setting them up so it's ready to be sold without the need for a setup. They have motivation to keep their guitars setup. I mean, have you ever went to a shop, picked up a guitar you wanted, and it had stupid high action? You're not gonna buy it until it's setup right? If they're setup, they'll play better and it'll be a lot easier to sell.
The process of building our kit guitars and basses is straight forward and requires little experience in woodworking or in instrument building. The entire instrument can be assembled with a few simple tools. Setting the instrument up for your playing style is also straightforward. We will guide you though the basic process in our instruction manual. For more complex or particular setup requirements, we suggest that you work with a professional for setup - just as you would with any instrument that you purchase.
The Epiphone Thunderbird IV Reverse Bass is Epiphone’s most distinctive bass guitar to date. The Thunderbird features the classic reverse body styling and dual humbuckers just like the Gibson originals! The Thunderbird IV features an alder body and a 34 inch scale bolt-on maple neck with a rosewood fretboard and dot inlays, and warm and phat dual humbucking pickups.
The BOSS ME-80 multi effects pedal is an excellent entry point into effects as it contains just about every type of effect you can think of. The ME-80 allows you to chain eight effect groups together in one patch with 36 preset patches allowing you to seamlessly switch from rock to funk to jazz at the push of a footswitch. There are also 36 user patches so you can create your own tone.
Gilmour was made famous by his haunting guitar scores in Pink Floyd. This “replacement” guitarist surpassed expectations and helped shape Pink Floyd’s unique sound. You can always expect hairs at the back of your neck to stand whenever you hear one of his solos – be it for the first or hundredth time you’re listening to it. All the emotion that Gilmour’s poured into his guitar work lives on in the music and is channeled through anyone who’s ever wanted to cover a Pink Floyd song. I know several guitar players (myself included) who whenever playing the Comfortably Numb solo – whether they are alone in their bedrooms or on stage – have always been unwillingly brought to tears, near the point of crying. How could you not expect things to get esoteric and mystical when it comes to music?

Made famous by Dream Theater guitarist and loyal Mesa Boogie endorsee John Petrucci, the Tri-Axis presents the absolute best of modern rock and metal tone with a touch of that signature Mesa Boogie character. If you scoured the Petrucci forums in the 90’s and early 2000’s, you’d be the first to know John had quite a few of these, both live and in the studio. It was the Tri-Axis that contributed to the now legendary sweet singing tone he achieved on countless DT albums. The first thing you’ll probably notice about the Tri-Axis is it’s unusual interface, which features digital numbers and arrow buttons instead of knobs.  The Tri-Axis also boasts five 12AX7’s into one rack space. Furthermore, you can achieve tones from Mesa amps like the Mark I, Mark IIC+, Mark IV™ and much more.

Peavey - Hartley Peavey started Peavey electronics in 1965, it went on to one of the largest musical instrument and audio equipment manufacturer in the world. They offer a multitude of guitars, amps and related gear, and the price point they use are comparatively very reasonable. One of their latest guitars, the Peavey AT-200, has the guitar world talking about its innovative auto-tune feature.
Tremolo is a regular and repetitive variation in gain for the duration of a single note, which works like an auto-volume knob; this results in a swelling or fluttering sound. This effect is very popular in psychedelic and trip-hop music. The speed and depth of the flutter are usually user-controlled.This is a volume-related effects pedal. This effect is based on one of the earliest effects that were built into guitar amplifiers. Examples include:

​​Our primary goal here at Top Custom Guitars is to create unique instruments that match our players' personalities. The bond we've formed over the past 15 years with each of our clients has not only fueled the growth and maturity of our instruments, it's fueled our creative growth as a company. YOUR passion drives OUR passion, and because of the individual relationships we build with our clients. Enjoy our galleries and forums, and if you have any questions, ideas, or dreams to share, we’d love to hear them.
The Model EP-17-T was a regular-sized thinline with a single round cutaway, bolt-on neck, non-dipped three-and-three head, dots, three pickups, adjustable bridge, plain trapeze tail, elevated guard, three rocker switches plate-mounted on the upper shoulder, and controls on a rectangular strip on the lower bout. All three were offered in shaded mahogany finish.
Acoustic guitar body sizes and styles differ between manufacturers. The C.F. Martin Company has been at the forefront of setting trends in body styles and sizes, and many companies have followed suit with their standards as a solid foundation,and altering their designs to creat custom sizes and styles. The following describes some of the common acoustic guitar body sizes and styles, and shares a little bit about the sound and tone profiles.   These profiles do not follow Martins standards to a tee, but do exhibit some of the most commonly used acoustic guitar body sizes and styles used, many having been influenced by the Martin Guitar Company.
Standard versions and collectable versions of the 4003 have included the 4003s (special)(discontinued 1995) a 4003 similar to the 4001s with dot neck markers, no body binding based loosely upon the original Rickenbacker basses and fitted with 4001 pick ups. 1985-2002 versions of 4003 and 4003s were available with black hardware option and black binding. Other later special editions have included 4003 Blue Boy, 4003 CS (Chris Squire) similar to 4001 CS Limited edition specials include the Blackstar, the Shadow Bass, the Tuxedo and 4003 Redneck.
As a result of requests by audio engineers to reduce onstage volume, in the 2010s, in many large venues. much of the on-stage sound reaching the musicians now comes from the monitor speakers or in-ear monitors, not from the instrument amplifiers. Stacks of huge speaker cabinets and amplifiers are still used in concerts in some genres of music, especially heavy metal, but they tend to be used more for the visual effect than for sound reproduction.
Loop-based guitar plugins are slowly moving to the point of obscurity as virtual instrument technology is getting to the point where even string instruments can sound out-of-this-world good and blossom with character. But there still exists some gems out there such as Acoustic Revolutions, which updated to volume two as recently as 2015, doubling the number of loops.
Ibanez offers a wide variety of electric guitars, bass guitars, and acoustic guitars. They’re not the best at producing super high-end guitars for pros and enthusiasts, but they are excellent guitars for any beginner. The price you typically pay for an ibanez is usually between $200 and $500. If you’re set on Ibanez, they do offer higher end models that can cost over $2,500. Despite their reasonable prices, the quality of Ibanez guitars is decent. Ibanez tends to have good performance at economical prices. Not every aspect of their guitars are perfect as they are a cheaper brand, but they do tend to put a little more effort into areas that matter. For example, the necks of their guitars are typically mahogany or basswood. These materials are known as the high-end materials that the top guitar models would use.
Midco International, a former musical distributor, sold the Lotus brand as an exclusive trademark of guitars during the 1970s and 1980s. Like many other distributors, Midco commissioned a manufacturer in Asia to build guitars under a unique brand name. However, many of these factories in Asia received requests to build guitars for multiple manufacturers/distributors, meaning the same guitar could essentially end up under multiple trademarks. This isn’t much different from what Harmony, Kay, and other house-brand jobbers from the Chicago area were doing in the 1940s through the 1960s.
Roger McGuinn worked with C. F. Martin & Company to develop a seven-string folk guitar. McGuinn’s guitar (the D7) is tuned the same as a standard folk guitar with steel strings, but the third (G) string is augmented with a harmonic string one octave higher. The intention was to offer the six-string player the chance to play “jangly” twelve-string style lead guitar.
Fortunately I did some research, performed some trial and error experimentation on my own semi-hollow (a very nice Epiphone Dot) and found what I consider to be the best way to wire up a hollow body guitar. You won’t need any uncommon tools or equipment – just a wrench set (or an adjustable wrench), plenty of wire, a pair of needle-nose pliers, a soldering iron, and a bit of patience. I’ve included plenty of pics to help illustrate each step.
Twelve-string guitars produce a brighter and more jangly tone than six-string guitars. They are used by guitarists for chord progressions that require thickening. The twelve-string is mainly used as a rhythm instrument due to the extra effort involved in playing lead guitar using paired strings. Twelve-string guitars have twelve tuning pegs and double truss rods and are slightly more expensive than their corresponding six-string version.
I agree to receive these communications from I understand that I can withdraw my consent at anytime. Please refer to our Terms of Use and Privacy Policy or Contact Us for more details. I agree to receive these communications from via the means indicated above. I understand that I can withdraw my consent at anytime. Please refer to our Terms of Use and Privacy Policy or Contact Us for more details.
On paper it looks fantastic for the money, but having Google'd it I found some people were less than happy with the fit & finish. But I value the opinions of my fellow MLP'ers a bit more than those found on some other forums so I'd like to hear what you all think. Aside from the electronics, which I'd replace, how is the quality of this instrument? Is it as good as the singlecut models?
OM-42PS: Paul Simon’s signature acoustic model (manufactured in the 1997 model year) is based on the OM-42, which had not been manufactured since 1930. Alterations were specifically requested by Simon himself. From the original planned run of approximately 500, only 223 were produced, making these a collector’s item. A standard version of the OM-42 is in the current range.
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!
Referring to this setup, Leckie also explains more about what makes double-miking so powerful: "If you brighten up the U67, it's totally different to brightening up the SM58, so sometimes I'll add a little brightness to the 67 and a little compression. But between that combination, I find I can get pretty much everything I need. They're rarely used at equal level; sometimes I'll favour the SM58 with the U67 at 10-15dB down. Even 20-30dB down, just bringing it in, it's amazing the different colour you get — how much the tone of the guitar changes."
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: davison","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"davison","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.
SHAPING THE BODY This is totaly up to you. You can carve down the body however you want. For my project I chose to carve down the body as close to the way the guitar I was modeling it after was. I used a verity of different sanders. I used a belt sander for the arm contour on the top back of the guitar, a dremmel tool with a sanding attachment for the small carve down under the neck, a 6" sanding disk attachment on my drill for the body contour on the back of the guitar, and a Black and Decker mouse sander for the neck area and smoothe down of all the other areas that had previously been carved. One rule of thumb is to only sand with a 220 grit when carving the body down. This will prevent any deep scratches any lower grit will cause. Don't use any electric sander on the falt parts of the guitar either, like the top or the back. Use a 220 grit paper with a sanding block to smooth out those areas. You can also run a slightly dampened cloth along the surface of the body and let dry before the final hand sanding. This will raise the small grains in the wood so they can be cut by the paper easier. Sand in the direction of the grain.
One look around our shop and you'll see that we're serious about offering our customers a large selection of instruments, equipment and gear. You'll find both new and used instruments, and our top-notch staff are here to help you choose exactly what fits your needs, preferences and budget. If you're interested in learning new skills and techniques, check out the group workshops we host on a regular basis. We cover a wide range of music topics, so stop by and see what class we're holding next. Can't make it in? Give us a call at 505-889-6300, and we'll be happy to answer all your questions.
Our private lessons in guitar, bass, keyboards, and drums are available in 30 and 60-minute sessions with flexible scheduling, so you can progress at your own pace. Maybe you'd rather be the instrument - in that case, come learn more about our singing lessons. And those are only scratching the surface of the unique services at Guitar Center Lessons in Roseville, which also include jam sessions, recording lessons, group lessons and more. Want to know what it's like to be in a band? Ask us about our Rock Show program, which connects you with other musicians at your skill level to get the full experience.
It’s big, it’s brawny and it’s bold—the Reverend Jetstream HB represents a ton of value for its price tag. Although it excels in rafter-shaking rock ’n’ roll tones, this offset guitar has a few nifty tricks that make it more versatile. Add to that quality construction and components, and you’re left with one of the best electric guitars under $1,000.
{ "thumbImageID": "MM100-Mini-Double-Cutaway-Electric-Guitar-Blood-Red/J37216000003000", "defaultDisplayName": "Mitchell MM100 Mini Double Cutaway Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blood Red", "sku": "sku:site51500000010548", "price": "79.99", "regularPrice": "99.99", "msrpPrice": "149.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MM100-Mini-Double-Cutaway-Electric-Guitar-Blood-Red-1500000010548.gc", "skuImageId": "MM100-Mini-Double-Cutaway-Electric-Guitar-Blood-Red/J37216000003000", "brandName": "Mitchell", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000010547", "price": "99.99", "regularPrice": "99.99", "msrpPrice": "149.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MM100-Mini-Double-Cutaway-Electric-Guitar-Black-1500000010547.gc", "skuImageId": "MM100-Mini-Double-Cutaway-Electric-Guitar-Black/J37216000002000", "brandName": "Mitchell", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut Stain", "sku": "sku:site51500000010546", "price": "99.99", "regularPrice": "99.99", "msrpPrice": "149.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MM100-Mini-Double-Cutaway-Electric-Guitar-Walnut-Stain-1500000010546.gc", "skuImageId": "MM100-Mini-Double-Cutaway-Electric-Guitar-Walnut-Stain/J37216000001000", "brandName": "Mitchell", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
• Fast Fingers: If speed’s the goal, most shred-heads prefer light gauge strings. They’re easy to bend and promote fast playing by offering less resistance to the fretting and picking hands. Since guitar strings are measured in thousandths of an inch, the typical recommended gauge for players planning to burn in standard tuning are .009s, available in every guitar shop.
SPRAYING TECHNIQUE Spray the body holding the can 6 to 8 inches away, moving either up and down or right and left depending on how you have set the nozzel. Start spraying from 2 inches outside the body and finish the stoke the same way. Don't stop or start the spry right on the body because you will end up with an uneven build up or paint drips. It is also good to spray a light "tack" coat first and let that dry for 45 min before laying on the thicker coats. This lets the paint adhere to the body better. You can also mount the guitar body to a square wooden stick that will fit inside the neck pocket so you can hold the guitar flat while you paint the top of it. This lets the coats build up thick and even, but watch for drips on the side.
If you've ever opened up a non-digital pedal - for example, a fuzz pedal - there's a good chance you will have seen a dizzying array of tiny components. However overwhelming this looks, however, there's probably only a relatively small number of component types present - and on boutique or older pedals, these should be even more clearly identifiable.

The Telecaster is known for its ability to produce both bright, rich, cutting tone (the typical telecaster twang) or mellow, warm, bluesy tone depending on the selected pickup, respectively “bridge” pickup or “neck” pickup. The bridge pickup has more windings than the neck pickup, hence producing higher output, which compensates for a lower amplitude of vibration of the strings at bridge position. At the same time, a capacitor between the slider of the volume control and the output, allows treble sounds to bleed through while damping mid and lower ranges.[3] A slanted bridge pickup enhances the guitar’s treble tone. The solid body allows the guitar to deliver a clean amplified version of the strings’ tone. This was an improvement on previous electric guitar designs, whose hollow bodies made them prone to unwanted feedback. These design elements allowed musicians to emulate steel guitar sounds, making it particularly useful in country music. These characteristics make the Telecaster a versatile guitar, usable for most styles of music including country, blues, rock, and jazz.

Everything about the shape and feel of the S6 Original is meant to be as close to familiar acoustic guitars as possible, including its playability, which is brought about by its 25.5" scale length, 1.8" nut width and 16" fingerboard radius. Tone wise, you're getting a crisp yet warm tone thanks to its pressure-tested solid cedar top, which also adds to the overall earthy appeal of the instrument.
When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​
La Niña en la Tienda de Flores / The Girl in the Flower Shop ( is inspired of when I was in a flower shop in Miami for buying red roses for Valentins day. The young girl serving me was a beautiful young "Latina" with a smile I will never forget. She told me my wife/girlfriend was very lucky to receive those...
Used as a send effect, a resonant filter can be used much more creatively than as an insert.You get very different results from your filtering depending on where you put the filter in the signal chain. To introduce some real movement into delay lines, for example, place sweeping low-pass filters before the delay. You then get the movement of the dry sound contrasting with the movement in the delay line. If both the filter sweep and the delay lines are tempo-sync'd, you can create interesting effects where the filter appears to be moving up and down at the same time.
I gave some relief to the guitar, just enough to be able to move a business card on the 8th fret. I think the truss rod adjustment is ok now. Strangely it's still buzzing. I compared the height of the bridge to my Navigator N-LP-380LTD and i have the same height on the RLG-120 the same. The string that buzzes the most is the D string!!! E and A string buzz too but less than the D. Don't know if i want to raise the bridge more. G B E are ok! Don't know if the D slot on the nut is too low. Seems like the slots on the nut on my guitar are higher than the ones on your Burny. Don't know what to do. Frets seem even. Any chance it's the saddles or something? Do they play a role on buzzing. I will raise the bridge tomorrow morning and see how it goes. Any idea what should be a standard string height on these guitars? Lets say height on 1st fret, 5th fret, 8th fret, 12th fret, 16th fret, 22nd fret. Can we say that? Can you tell me yours to check with mine?
Indeed, pros can be picky. Of course, they’ve heard, played and tried out innumerable electric guitars over the years and often have a high standard when it comes to the build, tone, playability and overall quality of the instrument. Many professional guitar players already consider themselves collectors, taking pride in what they have in their guitar arsenal.
It was also in January of ’64 that the Westheimer Sales Company, 1414 South Wabash Avenue, Chicago, began advertising its New Kingston, the “S” line of quality guitars. These double-cutaway guitars included the #S-1 single pickup, #S-2 double pickup, #S-3 three pickup, the #S-2T double with tremolo, and #S-3T with tremolo. These were most likely versions of the little MJ and WG guitars.
The amp and cabinet modeling is probably the weakest link of the Zoom G3X. Make no mistake - it’s nice to have customizable amp and cabinet pairings in a practice or headphones scenario, or if you simply don’t have a guitar amp yet. It’s just difficult to replicate the character and “oomph” of a vintage tube amp. This isn’t so much a knock on the G3X as it is of most amplifier modeling.
The frets are the little metal pieces that are installed in the instrument's neck. Frets do not make a significant difference in the sound of the instrument. They come in various sizes and materials. If you're just starting out, we recommend choosing Medium size frets made of Nickel-Silver. For a more scalloped feel, we recommend Extra Jumbo size frets. For increased durability (wear-and-tear), we recommend Stainless Steel frets. Some customers have reported stainless steel frets to be very slippery and brighter sounding when compared to nickel-silver frets – this could be a good, or a bad thing depending on the player.
I thin Yamaha LL16 is one of the best acoustic guitar on the market . Yamaha is known for making affordable, quality guitars, and this is one is no different. It features a solid spruce top, solid rosewood back and sides, and an ebony fretboard. It is smaller than the dreadnought guitars – a fact that is neither good nor bad but that does affect the way the instrument sounds and feels.
If the book had been proofread better, I'd give it 5 stars. For example, there are places where the text has both a fret number and standard musical notation, and the fret number is wrong. The book refers you to play along with the instructional CD backing tracks, but it doesn't tell you which track number to play. It's easy enough to figure out what was meant, but a little more care would have been better.

Rock On Good People (it’s actually rockongoodpeople) is another YouTube channel really designed to funnel viewers towards the creator’s website, which—no surprise—has heaps of stuff you can buy. But that doesn’t mean that Rock On Good People doesn’t provide a long list of free videos ranging from lessons for beginners through to how-to-play-techniques aimed at experienced players. What I like about Rock On Good People is the cool vibe you get from all the presenters, no matter the style or subject of the lesson, and some of the videos take you further down the guitar-playing track with themes like “Tips For Improving Your Live Shows”. That might seem a long way off, when you’re currently trying to get your head around playing basic barre chords, but these videos have hints and advice that are good seeds to plant in your mind early, even if you’re still some years off jumping off your first Marshall stack and into the mosh pit.
{"pageName":"[mf] pdp: el dorado vintage handtooled leather guitar strap","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: accessories: fretted instrument accessories and parts","prop1":"[mf] shop: accessories","events":"event3,prodView","evar51":"default: united states","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";361014","linkInternalFilters":"javascript:,","channel":"[mf] shop","prop7":"[mf] product detail page"}
here is an example of why an acoustic reigns supreme for practical reasons. Last week, I had to get new tires on the truck. Knew I had a couple hours to kill while there. the Discount Tire was on the way to my guitar teacher… in a big way (an hour drive up to Denver for guitar lessons, the Discount was half way there). So, I brought my acoustic in to Discount and played for a couple hours in the waiting room. People loved it, and were shouting out requests and stuff.
Gibson Les Paul Studio Electric Guitar The Gibson Les Paul Studio electric guitar has been around since 1983. For 2018 Gibson upgraded one of its most well-loved models, fitting it with cryogenically treated frets for greater fret durability, adding fingerboard binding and giving it a Slim Taper neck profile. The core Les Paul tones and quality hardware and electronics are still there, of course.
Ovation makes a great acoustic electric that is only $469. It has a spruce top with a lyracord bowl back. Some people don’t like the rounded back as it’s hard to keep it in your lap, so a strap may be needed if you should choose this guitar. The onboard pre amp has a built in tuner which makes staying in tune very simple. It’s nice not having to keep up with a separate tuning device. The reviews for this guitar are positive, citing great tone and playability. Click here for more information and pictures of this guitar.
The original flanger effect was produced back in the 1960’s by recording to two tape deck simultaneously and mixing the result. As they were recording, an audio engineer would lightly touching the flange of one the reels of tape. When it played back, it created a swooshing effect similar to what you hear when a jet airplane takes off. Stomp boxes use a delay effect to create a similar sound.
Guitars vary by type. Some are designed for beginners, while others are customized for professional guitar players. Most of the major guitar brands are available in a variety of different styles, each designed to best suit a customers' specific playing needs. Ease and sound are certainly big factors to consider when choosing a new guitar. In general, heavy wood makes the tone rich and full--the weight and quality of the wood makes a big difference when choosing which guitar you should purchase. The type of music that you will be playing will also have an impact. While Fenders may be the best for rock and metal, an Ibanez may be more well suited for blues and jazz.
The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.
The design of this guitar probably makes it stand out from the “crowd.” This is another awesome six string acoustic guitar from the brand Juarez available in sunburst and black . It is designed for the right handed and mostly comes in Sunburst color without a bag. The body is made from blackwood with the top laminated with Linden Wood. The entire structure has a natural gloss finish, with the fret board having up to 18 frets. The hardware structure has a chrome finish. Prices are quite fair, ranging from INR 2,790. Find more details below.
*VERY GOOD CONDITION, W/CD (NEVER USED)* PAYMENT is requested within 2 days or 48 hours of purchase.   FEEDBACK: Positive feedback and a 5 star rating is such an important part of the eBay rating system. Please contact me before leaving Neutral or negative feedback, I will try to help you. I will leave feedback when feedback is left for me!   SHOP WITH CONFIDENCE 😎   TRUSTED & ESTABLISHED SELLER!!

One main reason for this is the “ambiance” of a live performance. It’s not just the acoustics of the hall where the concert is taking place but also the acoustic interaction of all instruments on stage, the pure power of having everything cranked to the max and even the response of the audience that often psychologically makes your guitar sound a lot better to you than when you try to re-create that sound in the recording studio.

Launch price: $1,499 / £1,419 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood/maple (dependent on finish) | Frets: 22 | Pickups: 3x V-Mod Single-Coil Strat | Controls: Volume, neck tone, bridge and middle tone, 5-way selector | Hardware: 2-Point Synchronized vibrato, Fender standard staggered tuners | Left-handed: Yes | Finish: Antique Olive, 3-Color Sunburst, Black, Candy Apple Red, Natural, Olympic White, Sienna Sunburst, Sonic Gray
Echo – There is some crossover between delay pedals and echo pedals, but as a general rule, you can think of echo effects as extended delay effects. It’s a brother of reverb pedals, producing the canyon-like echoing you would naturally hear in a wide-open space. With long enough settings, an echo pedal can even let you harmonize against your own notes as they repeat.
The first step is to determine what’s in your pickup already. The most common magnets for humbuckers are (roughly in order of strength): alnico 2, alnico 4, alnico 5, and then various types of ceramic magnets. In simple terms, the stronger the magnet, the greater the potential output. But you can’t just look at magnetic strength alone, because stronger magnets also affect the string’s ability to sustain.
Technically, distortion is defined as being any change to the original signal other than in level. However, we tend not to think of processes such as EQ and compression as distortion, and the term is more commonly used to describe processes that change the waveform in some radical and often level-dependent way. These include guitar overdrive, fuzz, and simply overdriving analogue circuitry or tape to achieve 'warmth'. In the analogue domain, heavy overdrive distortion is usually created by adding a lot of gain to the signal to provoke deliberate overloading in a specific part of the circuit. Such high levels of gain invariably bring up the level of hum and background noise, so it may be helpful to gate the source. Though overdriving analogue circuitry is the traditional way of creating intentional distortion, we now have many digital simulations, as well as some new and entirely digital sound-mangling algorithms.
Note that the competition for our pick in this “simple beginner’s amp” category was much more hotly contested than our other picks in this guide. The Crush 12 just barely edged out two other amps that our panelists liked. One is the Stage Right 611800, a very loud, 40-watt amp with built-in reverb that’s a great choice for those who need a powerful amp on the cheap (although that person probably isn’t a beginner). The other is the Vox Pathfinder 10, an amp with a simple control setup that our panelists loved, but a rather bright and blaring sound that some liked and some didn’t. Both are mentioned in the competition section below.
In recent years,[when?] guitars and basses with multi-scale or fanned-fret fingerboards started to appear. These instruments are supposed to offer an advantage over the classical fixed-scale guitars and basses by providing more freedom in setting the tension of each string at the design and manufacturing phases. This may result[according to whom?] in a more uniform tension of the strings, as well as possibly[weasel words] offer timbre and tonal characteristics somewhat different from the usual fixed-scale instruments.

Description: 2014+ Model. Body: Maple - Flamed - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Mahogany - Nut Width: 43mm - Fingerboard: Ebony - Frets: Medium - Inlay: Pearl & Abalone Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Gotoh 510BN - Bridge Construction: Ebony - Cutaway: Double - Hardware: Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Circuit Type: Passive - Pickups: Super 58 - Pickup Configuration: H-H - String Instrument Finish: Vintage Yellow Sunburst - String Instrument Accessories: Hardshell Case - Made In: Japan
This beast features a classic Sitka spruce top with a rosewood back and sides combo. We have already mentioned a few guitars that feature these types of tonewood. However, the difference here is that the Martin DCPA4R is a handmade instrument that brings you the craftsmanship of Martin's top luthiers. If you appreciate craftsmanship, you'll love this instrument.
Lyle guitars are among the rarest brands of electric and acoustic guitars in the world. Produced during an indefinite timeline in the 1960s and 1970s in Japan, the history of the Lyle instrument brand remains somewhat of a mystery. Total distribution of Lyle instruments in the U.S. was very limited. The same company that produced many of them, Matsumoku, also produced the more popular Aria brand.
We have covered pickups here before so rather than running over old ground I suggest you read that article to get an understanding of the different types of pickups an electric guitar uses and how they work in greater detail. For the purpose of this article, however, all sound starts with your pickups. Pickups are essentially magnets, generally 6 small magnets wrapped in a very fine copper wire (over 7000 times), and can be better described as magnetic wire coils.
The overall design of the JS11 Dinky is a streamlined and straightforward, it is basically a less contoured version of the Dinky with cost-effective parts, assembled and built overseas. But don't count it out yet because many found it to exceed their expectations in terms of looks and tone. The 25.5" scale maple neck, flat 12" radius fingerboard and 1.6875" wide nut also makes it a pleasure to play, and have made life easier for both students and experienced players alike. The high output Jackson designed humbuckers are also good enough for high gain playing, although most got great results by switching them out.

Super nice !.... Beautiful Patina exceptional Booming sound much like the old Martin 000 or old Gibson for that matter for a fraction $ and this ONE is a really good one folks. These are a well kept secret sort of ... known for their GREAT rich mature sound. This example is in fine all-round Original condition without any of the over 60 group problematic issues- none found anywhere upon close examination, no NONE nada -- neck issues -frets ARE good - tuners ARE good - bridge IS good - Solid Top is without a crack it s wood is FREE of cracks, Back is OK no buckle rash , no buldge to its Spruce top, The bridge is tight and NEW MARTIN STRINGS and just JVGuitars Set up this baby plays and sounds amazing at this price point unbelievable! Made in Japan quality with a beautifully grained high grade Mahogany medium soft V NECK feels like an old Martin too ....looks at the neck grain they used a beautiful Honduran mahogany not African or other this one is cool See the Pics of that ...its original Tortious pickguard is nice too..... nearly 40 years old its amazing but she's not new or mint of course she has a few minor doinks and plenty of that natural vintage patina and such but overall she's JVG condition rated at vintage excellent used condition rated. She Plays with easily and will bring a warm smile to your face when playing GREAT TONE fingerpicking rich and punchy its a very fun guitar to play... she's over 45 years old and in this kind of condition..... you better snap this gem up before she's gone or I change my mine and keep her for myself...haha this is my business I need to sell but you get my point its a good one folks. This is one amongst several of the FG150's Red Label Nippon Gakki's we have and I call it ( # 3 ) Contact Joe by email to BUY it:

FYI, Dave might be backed up due to demand if he is still working, so I'd call those places up and ask them in advance. Twin Town isn't too bad a drive if you've got a car, maybe 15 minutes from Bloomington, but the place up in Fridley is about a 20-25 minute drive. They might be the best at working on short notice though as they're a smaller place. Definitely give them all calls.
Finally, there was a mysterious lap – clearly Valco – which had no real National or Supro equivalents. This had tapered shoulders that swept down, wing-like, to the bottom, which had a little concave cutout. It was covered in ivory plastic on top, with black-lacquered sides. It had a rosewood ‘board with dot inlays. The pickup was the new exposed-pole single-coil with a bolt-on handrest, in front of narrow rectangular plate that held the saddle and attaching holes. Volume and tone knobs sat on little mini-plates on either of the strings. Another atypical downscale version of the National New Yorker was offered at the same time by Montgomery Ward.
First of all we have to make special mention for the build quality of the RP500. It has a cast-metal chassis and vacuum-style footswitches like on an actual stompbox, and it just feels like it’s built better than any Line 6 or Boss multi-effect we’ve tried. On the rear of the RP500 you’ll find a ¼” input for your guitar, stereo output, headphones jack, AUX in, balanced XLR stereo out, and a USB port. A power supply is included, so points for DigiTech over Boss for doing users that courtesy. A look at the front panel layout reveals it’s pretty unique. It doesn’t have the side-by-side stompbox look we love so much in the Zoom G3X, it has fewer knobs than the Boss ME-80, and yet it looks more straightforward to use than the Line 6 POD HD500X. The dimensions and weight are almost exactly the same as the Boss ME-80 (about 20 inches wide, and weighs approximately 8 lbs).
Im sure are techs at these stores that aren't bad AT ALL, but when you don't know who they are, I wouldn't trust them with a truss rod while you're not there standing over trheir shoulder watching them. I may just be paranoid, but hey, better safe than sorry is the way I look at it. I've done my own setups. And I plan to keep doing it until the day comes when I order myself a custom bass that I worked my ass off for, then I'll be willing to spend $50 on a 'properly' done setup. I dunno
thanks for your note. We are not drawing any conclusions whether one is better than the other, just that they are different, which I think is apparent from the samples. Also, we did use only one pickup that we moved between the samples, and mounted it in the exact same location in relationship to the bridge. I would claim that the only variable that could have been controlled to a greater extent is the picking attack.
Or course, you have a repulsive snobs on here that can't acknowledge the truth that the list above correctly consists of quality, popular choices. I'd never play a Dean, a Parker, or a Godin. I'm so glad you love them, but you're a minority. The Gibsons and Fenders are tried and true designs. That's why the majority play them. They're actually good guitars, at least the equal of the snobs-are-us suggestions above. Having limited funds to spend, and wanting to ensure that a quality guitar with quality tone is aquired, I would go with a Fender or a Gibson without hesitation. I'm not a snotty nosed rich brat like most of the above put-downs and belly achers; I'm a 50+ mature adult who knows how to play and I play good, thank you. Not because I say, but because that's what others say. Fender and Gibson are overall the best guitars on the market for the average person of means and talent, unless you're rich and can afford something above $5000.00. Otherwise, calm down, remove the pentangle from your rectum, and relax. Is it really that important to you? THEN OPEN YOUR OWN WEBSITE AND PREACH ABOUT IT. This has been a public service message...Billy
The first of the easy guitar chords for beginners is E minor, followed by E major. Next you learn A minor and C major, all in the open position, which means the chords contain open strings and are played at the nut position. The next chord is D major, followed by A major. You will learn the B major chord, which is a barre chord with the root note on the A string. After this you learn the B7 open chord, which sounds really nice.
The middle S (Position 3) by itself also works very well for chord strumming, and it also responds very well if slapping is something you like to do (A single coil in the middle is literally the textbook choice: Single coils typically have more bite and will bring life to the pops, and it's position will ensure the slaps aren't too boomy (like a neck pickup would be) or too tinny/nasally (like a bridge pickup would be)).

Featuring a comfortable neck and solid spruce top, the Epiphone Dove Pro Acoustic-Electric Guitar rings out with full, rich sound. Based on a design going back to 1962, the Dove Pro is equipped with a Fishman Sonicore pickup system that accurately reproduces its acoustic tone when you plug the guitar into an amplifier or PA system to play with amplified instruments. A terrific value.
{ "thumbImageID": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "defaultDisplayName": "Epiphone Les Paul Special I P90 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51314371183322", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry-1314371183322.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Black", "sku": "sku:site51314371183302", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black-1314371183302.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51314371183312", "price": "149.00", "regularPrice": "149.00", "msrpPrice": "209.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow-1314371183312.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

There are nine types of guitar here: four folk, two classical, one flamenco, one jumbo and one gypsy, as well as a choice of nylon or steel strings. It works like Kontakt in that you have MIDI keys for playing notes and then control keys for the playing articulations, such as legato, palm mute, harmonics, sustain or chord detection. There are different chord types and a strumming engine to recreate the action of playing.
For years, Schecter has provided a nice counterpoint to the various Les Paul and Strat look-a-likes on the market (many of which are very good) at an affordable pricepoint. As my local guitar shop owner once said, for the money, they might make the best all around guitar south of $1,000. You can spend more than that, but the point is, they don’t skimp downrange.
"The library has a huge amount of great samples covering every nook & cranny of the electric guitar, and it really is of the highest quality... I could tell that they must have put in a gigantic effort into the scripting, sampling, and design... It’s easy to use, has extensive options for articulations, sounds even better with its effects, and yet it can have a pristine, clean sound as well. I highly recommend it... When they say 'Absolute Electric Guitar' on their website, those words are a lot to live up to [and] they achieved this with a brilliant product and awesome sound." Rob Mitchell (SoundBytes Magazine)
Nice 60's, Japanese Hollow-Body. Really cool, "Barney Kessel" style hollow body / Arch top, double cutaway Electric Guitar by Univox. 2-Pick-up. Fabulous Sunburst finish. Bound, Rosewood fingerboard. "Trapeze" tailpiece. Separate Volume and Tone for each pickup and adjustable truss rod. White "Mother-of-Toilet seat" headstock overlay. Finish and wood in great shape. Plays and sounds great. Missing Logo, Pick guard and whammy bar. Not many finish chips. Very shiny. Some chips on plastic pick-up bezel (see photos). Really cool "Emerald" cap on pick-up selector switch. Frets in great shape with minor, normal wear. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, Re-soldered the output jack, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!),  and cleaning and polishing. Plays and sounds great. We also installed a new set of .011 "Flat-wound" strings. Dilapidated, but functional gig bag included.
In launching the AZ series, the goal was not to merely create a completely new guitar model, but to sculpt a great guitar that can foster the potential of the modern ?third phase' while maintaining traditional elements. Even though Ibanez is thought of as a modern guitar brand, it has decades of accumulated knowledge and a history of pushing the boundaries. The AZ series carries with it all of the hallmarks of these tried and tested Ibanez qualities. The harmonic balance between bridge and ...
The Salamander Grand made by Alexander Holm (details above) who sampled his Yamaha C5 Grand and is quite well known for having a great sound. Most sf2/sfz versions seem to be lacking the proper dynamics, have latency problems or have been oversimplified. This sf2 version has addressed these issues yet retains its essential character including optional resonance but removes other non-essential sounds such as pedal noises.

{"pageName":"[gc] pdp: epiphone les paul special vintage edition electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,event45,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";J40301;;;;evar65=New-Guitars-Epiphone","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
And again. the no-brainer: your guitar just plain sucks.  If your bought your guitar at Wall-Mart for $19.99, PLEASE don't put my pickups in it!!!  Here is EXACTLY what you should do with it: keep it around until you are playing your first big club gig and you need to do something extraordinary to get the crowds attention.  As you thrash away on the final chord of the last song pick up THIS guitar, douse it heavily with lighter-fluid and light that puppy up!  Now that's getting more that 20-bucks worth of wow-factor out of that pile of Chinese dog-dung!
While Gretsch is known for semi-hollow and full hollow body guitars, and it is only fitting that one of their semi-hollow chambered body models make this list, specifically the Gretsch Electromatic Pro Jet Bigsby. Being part of their Electromatic line, brings with it all the Gretsch goodness minus the premium appointments, at a very accessible price point. It is a true archtop thinline guitar, that passed the same attention to quality and detail that more expensive Gretsch guitars also go through.
Ultimately, you want to make the best purchase for the person who will be playing the guitar while staying within your budget. As we recommended in the beginning, it’s good to get an idea of what the player is looking for. Find out what styles they like, and his or her favorite music. Looks are important too! The right guitar in the right color could make all the difference.

Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  250K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.  Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
Some guitars are equipped with active pickups that require batteries as an energy source and incorporate a preamp for sound-shaping. Active electronics may also include filters and equalization circuits for added sound control. Guitars with active electronics generally have a higher output than magnetic pickups and produce cleaner, clearer sound. Most guitar pickups are passive.
The implementation of musical chords on guitars depends on the tuning. Since standard tuning is most commonly used, expositions of guitar chords emphasize the implementation of musical chords on guitars with standard tuning. The implementation of chords using particular tunings is a defining part of the literature on guitar chords, which is omitted in the abstract musical-theory of chords for all instruments.
The #1 cause of fret wear is the fretting hand pressure exerted by the player.  I have some clients that grip very tightly and wear frets quickly (Rob Fahey), and some that grip very lightly and take forever to exhibit significant wear (Jasan Stepp, Dog Fashion Disco/PolkaDot Cadaver).  Fret material hardness, string hardness and frequency of use all contribute to wear as well, but hand pressure is still the leading cause since frets do not wear themselves out.  Technique is different for every player, unique and personal and habits can be hard to change.  Just like brakes in a car, how hard and how much something is driven directly impacts wear and longevity.  Please see the refrets page for further thoughts on this topic.
What makes the THR100HD special is its clever digital power amp, which faithfully mimics the operation of real valves. Then there's the fact that you get two of everything: two preamps, both with a built-in booster function that behaves as a stompbox; two effects loops; two power amps; two XLR line outs. What you see is very much what you get, with a five-position amp voice selector, which packs three overdrives - crunch, lead and modern - and two cleans: solid, and er, clean. There's also a channel volume control, because the master volume control works inside Yamaha's Virtual Circuit Modelling environment, adding more drive to the THR's digital power amp simulation, which in turn has five different valve choices, as well as Class A or Class A/B operation. Lurking on the rear panel are two speaker-simulated balanced XLR line-outs, with a ground lift switch that uses the latest Impulse Response cabinet simulation. There are superb Fender-influenced cleans, bluesy touch-sensitive crunches and a choice of classic or modern lead tones, all footswitchable for your convenience. The tones are so convincing it's really hard to believe there are no valves. The interaction of the clever digital power stage with the loudspeaker is just like that of a good valve amp, and the virtual valve choices are uncannily authentic.
Before taking the plunge, make sure that you have the necessary tools to build the guitar of your dreams. Most kits will require you to have screwdrivers, pliers and soldering iron for the assembly process. While others require more, like wood glue, bandsaw and other wood routing tools. Once you've decided on the finish, you'll also have to get finishing tools like sandpaper, wood sealant, primer, paint and more. It is also recommended to have a dedicated room or space for you to work on, a nice working table would also make work a bit more easier.
A Japanese company which is renowned for its amazing guitars, Ibanez is a great brand for beginners. Since the Ibanez RG450DX RG Series Starter Electric Guitar has a maple neck, mahogany body, and a rosewood fretboard. Together, these give this guitar a great sound. The Ibanez RG450DX RG Series Starter Electric Guitar is a pretty fine looking guitar with amazing sound to boot.
If you are looking for a simple and old school way to spice up your guitar sound, tremolo is a great option. Tremolo lowers the amplitude of your signal at a regular rate. It's like having a machine move your volume knob back and forth rhythmically, and it's one of the first effects that were built into early amplifiers. While simple in concept , tremolo adds a great movement to you tone, in either a subtle or intense way. The choice is yours. On low settings, a pleasant motion effect can add some ear candy to your tone. Set on high, a “stutter” or “chop” effect can add emphasis to a song or riff. Some pedals will even split the repeats in stereo, which adds a genuine vortex to your tone.
You’ll find a full slate of dedicated bass stompbox effects as well as many multi-effects pedals and processors. Like their guitar-friendly cousins, bass effects offer most of the same tone shaping capabilities, including chorus, reverbs, delays, phasers, and tremolos. Because of the bass’s unique sound dynamics that reach deep into the lower frequencies, many bass effects are focused around compression and limiters that help keep a lid on destructive subsonic sound waves that can damage gear. Typically, many guitar effects are not optimal when used with a bass.
Personally, I don't like the fender and gibson knockoffs, and squire's aren't the best brand, but I have a squire telecaster, which is actually great quality, better than I expected, and it has a slightly more drier, shaky tone that an actual tele, which is a nice feature. My friend has a squire precision bass, and upon hearing it, I honestly thought it was an actual precision bass at first, so, if you must get squire, than consider either the tele or the precision.
The far mic will give you a bigger, more heavy-metal type of sound with a more pronounced bottom end on it. The reason for that is low end sound waves take much more distance to fully develop than high end waves. Someone once told me that a low E note on a bass guitar takes thirty-three feet to fully develop. Whether or not that is true will only be known by people who have enough time on their hands to calculate such things. I do know that if you take a tuning fork that's vibrating with a high note and stick it in the imaginary puddle of water, it will generate waves that are small in comparison, and closer together than what a low note will make. Simple physics.
To celebrate the new generation of shredders profiled in our May/June “Loud Issue,” the SPIN staff decided to find some wheedle in a haystack, taking on the impossible task of ranking our favorite guitar players of all time. Traditionally, the “greatest guitarist” timeline begins with Robert Johnson magically conjuring the blues, nears perfection with Eric Clapton mutating it beatifically, and then ultimately reaches a boomer-baiting Rock and Roll Hall of Fame apotheosis with the free-spirited Jimi Hendrix shooting it into space like feedback-laden fireworks. For this list, we veer toward the alternative canon that kicks in with the Velvet Underground trying to erase that form entirely, making guitar solos gauche and using instruments as sadomasochistic tools for hammering out sheets of white heat.
Three full steps from standard tuning. Used by Dream Theater, Adema, Asking Alexandria on From Death to Destiny and The Black, Boris, Cannibal Corpse, Morbid Angel (on several songs starting with their album Covenant), Father Befouled, Sepultura, Jeff Hanneman of Slayer (on "War Zone" and "Here Comes the Pain" from God Hates Us All and "Not Of This God" from World Painted Blood. Kerry King used a 7-string for those songs), Mutoid Man (Stephen Brodsky started using the tuning during the recording of the Helium Head EP to fill in the low end of the sound, in an attempt to make up for their lack of a bassist at the time), American Head Charge, Nickelback (on "This Means War" and "Gotta Get Me Some" from " Here and Now" and Nevermore (when band switched to 7 strings).
A group of blues-crazy Brits even took their name from one of his songs: the Rolling Stones. The blues in general, and the recordings of Muddy Waters in particular, became the “roots music” for the youth counterculture that sprang up in the Sixties. Countless bands, from the Stones on down, have assayed Waters classics like “Rollin’ and Tumblin’,” “Got My Mojo Workin’,” “You Shook Me,” “I Just Wanna Make Love to You” and “Mannish Boy.”