Because IRs can be recorded in virtually any space, convolution reverbs generally come with a library of IRs ranging from small live rooms to famous venues, top studio rooms, forests, canyons, railway stations and just about anything else you can think of. They sound very convincing, and there's plenty of variety to be had, but once the IR is loaded, there's only a limited amount of editing you can do without spoiling the natural sound. Usually you can apply EQ and also change the envelope of the reverb decay to make it shorter, and adding pre-delay is not a problem, but after that you pretty much have to take what you get. Some companies, such as Waves, have managed to create additional controls but, as a rule, the further you move from the original IR, the less natural the end result.

The most musically satisfying types of distortion tend to be progressive, where the audio waveform becomes more 'squashed' as the level increases. Hard clipping, by contrast, tends to sound harsh. All these types of distortion introduce additional harmonics into the signal, but it is the level and proportion of the added harmonics that creates the character of the sound. Harmonically related distortion can be added at much higher levels than non-harmonically related distortion before the human hearing system recognises it as such, so there is no way to define a percentage of distortion below which audio is acceptable or above which it is unacceptable. The reason that digital distortion has its own character, which most people find less musically pleasant, is because it is not usually harmonically related to the input signal. For example, quantisation distortion, which results from sampling at too low a bit depth, sounds quite ugly, though many dance and industrial music producers have found a use for it, and some plug-ins deliberately introduce it.
{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: recording gear","pageName":"[gc] shop: pro audio: recording gear","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: recording gear","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"recording gear","prop5":"[gc] shop: pro audio: recording gear","prop6":"[gc] shop: pro audio: recording gear","prop3":"[gc] shop: pro audio: recording gear","prop4":"[gc] shop: pro audio: recording gear","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}
The SD is a classic. This had a more exaggerated Jazzmaster shape than the T-60. It had a dramatically swept back lower horn, and an offset pair of waists, looking as though it’s been slightly melted. These had bolt-on necks with the elongated Strat-style head, with round logo stickers. A rectangular plastic control panel was mounted above the strings, with large thumbwheel controls and on/off rocker switches, while a large-ish pickguard was mounted under the strings. The controls on the SD-4L were especially interesting, taking their cue from the Italians, no doubt. The thumbwheels were for volume and tone, while there were a total of six rocker switches. Four of these were on/off for each of the four pickups, but in between were two more. Their function is unknown, but a good guess would be phase reversal between the front and back pairs of pickups. Both models had the rectangular fingerboard edge inlays. With “L” designations, both had vibratos. These consisted of a fairly simple bar for string attachment with a series of springs behind it, all covered with a hinged metal cover. The handle was extremely long. Pickups were the beefy tall rectangular type with metal cases and black plastic center tops with exposed pole pieces (these could be screws or squares). The SD-4L had four pickups, in two pairs, while the SD-2L had two. If I couldn’t have a Spectrum 5, I’d be looking for one of these (I am!).

Potentiometers are used in all types of electronic products so it is a good idea to look for potentiometers specifically designed to be used in electric guitars. If you do a lot of volume swells, you will want to make sure the rotational torque of the shaft feels good to you and most pots designed specifically for guitar will have taken this into account. When you start looking for guitar specific pots, you will also find specialty pots like push-pull pots, no-load pots and blend pots which are all great for getting creative and customizing your guitar once you understand how basic electric guitar circuits work.
The HOF is one of the single best examples of a convergence of price and quality features that we've ever been able to find. While we can't mention pricing in this article, we'd recommend clicking through and checking the retail price on the HOF, then comparing it to the other reverb pedals in this list. As far as value, the HOF is nearly a perfect 10.
The first guitar amplifiers were relatively low-fidelity, and would often produce distortion when their volume (gain) was increased beyond their design limit or if they sustained minor damage.[3] Around 1945, Western-swing guitarist Junior Barnard began experimenting with a rudimentary humbucker pick-up and a small amplifier to obtain his signature "low-down and dirty" bluesy sound. Many electric blues guitarists, including Chicago bluesmen such as Elmore James and Buddy Guy, experimented in order to get a guitar sound that paralleled the rawness of blues singers such as Muddy Waters and Howlin' Wolf,[4] replacing often their originals with the powerful Valco "Chicagoan" pick-ups, originally created for lap-steel, to obtain a louder and fatter tone. In early rock music, Goree Carter's "Rock Awhile" (1949) featured an over-driven electric guitar style similar to that of Chuck Berry several years later,[5] as well as Joe Hill Louis' "Boogie in the Park" (1950).[6][7]
Pictures, description and soundclips from a 1973 Fender Musicmaster bass. The Musicmaster bass changed very little between it's introduction in 1970, and it's deletion in the early 1980s. Although often regarded as a student bass, the Musicmaster was of high enough quality, both in terms of components and build, to sell to student guitarists and more advanced players looking for an affordable shortscale bass.
Now I do all of my own adjustments and I have no plans to change that unless I run into something that's beyond me. Even if that scenario occurs, I still plan to try to learn as much as I can so that hopefully I will be able to take care of any future issues that are related. Mark did a great job for me but I feel that I do a better job adjusting my instruments to my needs.
There are several kinds of bridge (located at the bottom of the guitar, where the strings are attached), but to keep things simple you’ll usually find either a fixed bridge or a tremolo bridge. Both have their pros and cons. A tremolo bridge will allow you to experiment with everything from vibrato effects right up to full-on divebombs, and can sound amazing when playing high lead solos. However, tremolo bridges can affect tuning, unless the bridge and nut locks. A fixed bridge is excellent for sustain and tuning stability, although there’s no vibrato. Again, it’s all down to personal preference.
PRS S2 Vela comes as one of the more extraordinary models in this company’s lineup. This is made apparent by the body shape that stands out from their usual designs. When I had some one-on-one time with this axe, it left a good impression. One thing that really stuck with me was just how light it was. That usually means a thinner tone, but not with this PRS. It plays great, and is pretty smooth.
{ "thumbImageID": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "defaultDisplayName": "Fender Kurt Cobain Jaguar NOS Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst Rosewood Fingerboard", "sku": "sku:site51398177063833", "price": "1,224.99", "regularPrice": "1,224.99", "msrpPrice": "1,225.01", "priceVisibility": "1", "skuUrl": "/Fender/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard-1398177063833.gc", "skuImageId": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The common design of a standalone stompbox is simple and, thus, hasn’t changed much: The guitar lead plugs into an input while a second lead carries the output to the amplifier. In between, a multitude of knobs, switches, and pedals modify the signal. To connect two or more boxes requires “jumper” leads, which chain the boxes together to complete a circuit of circuits, each one powered by a 9V battery. Typically, stompboxes are activated by “stomping” on an on/off bypass switch. This simple design enables tinkering: The exterior casing can be easily removed, exposing the interior for modification. To do so requires only a basic grasp of electronics, solder tools (or a solder-less breadboard circuit), and patience. Lots of patience.
This is one of the most popular guitar brands bought by the beginner and advanced learners in India. This brand is also one of the top-rated electro-acoustic guitars for beginners. This is the Japanese brand of guitar that is available in acoustic, bass, electric, and classical guitars styles. It flourishes a full-size frigate shape with a laminated select dapper top, and mahogany back and sides. It sports a mahogany neck, with a rosewood fretboard and 20 frets, withal an Ibanez-branded headstock with pretty good closed chrome die-cast tuners. The price of this brand of guitar starts from 13,000 approximately.
Phasers – Sometimes called “phase shifters,” these pedals take the “copy” of the guitar signal and put the waves out of phase with each other before mixing them back together. Since those sound waves are no longer in sync, they’ll interact in unique ways, creating futuristic whooshing and swooping sounds. Look back to late 1970s and early ’80s rock music, and you’ll see lots of examples of phasers in action.
Three acoustic guitars were offered in 1971. These were glued-neck models with roughly Martin-shaped heads and pickguards slightly larger and squarer than a Martin. All had spruce tops (presumably plywood), mahogany bodies and necks, rosewood fingerboards and dot inlays. These appear to be Japanese, not Brazilian Gianninis. The bridges are glued on, with screw-adjustable saddles and pins. The U3012 Auditorium was a Spanish-shaped steel-string and cost $89.50 plus the cost of a case. The U3013 Grand Auditorium was a dreadnought costing $105. The U3014 Twelve String cost $120.
Vox is a musical equipment manufacturer founded in 1947 by Thomas Walter Jennings in Dartford, Kent, England. The company is most famous for making the Vox AC30 guitar amplifier, used by The Beatles, The Rolling Stones, The Kinks, The Yardbirds, Queen, Dire Straits, U2 and Radiohead, the Vox Continental electric organ, and a series of innovative electric guitars and bass guitars. Since 1992, Vox has been owned by the Japanese electronics firm Korg.

After the wah or EQ, try throwing in your phasers, flangers, chorus or vibrato effects. Because they’re following overdrive/distortion, wah and EQ, you will find that modulation effects gain a richer and more complex sound than they would have on their own or toward the front of your chain. But annoyingly, putting them right at the end of your chain can also be somewhat limiting because these types of effects tend to overpower others that go before it. Modulation effects work best right in the middle of the effects sequence.

Great article. Thank you!However I've had a lot of experience with Squier guitars. They often come in at $200, sometimes on sale for $129 but I live in a college town and have had many Squiers. All have very sharp fret ends which discourage beginners not knowing they must be filed. IDK about any of the others but this is my only complaint. Squier quality and playability (after fretwork) is amazing at that price point.
Also, if your slide playing includes any fretting at all, FORGET IT. While it certainly raises them well away from the neck, the strings are lifted to a height that makes trying to fret them pull them off pitch well before you reach the fret... and there is NO adjusting it. I used one on a wide neck 12 string strung for six. A neck designed for the tension of 12 strings easily takes the tension of a heavy gauge set in a raised open tuning. The "Slide Guitar Extension Nut" is ideal for such an application (if you don't want to even try any fretting) but I doubt Stewey Mac's sells very many of them.
What equally contributes to the Entourage’s place on our list of the best acoustic-electric guitars is its nuanced and bright acoustic sound. This signature tone comes courtesy of a select pressure-test solid cedar top and wild cherry back and sides. The electronics on this model are easy to use and compact, highlighted by a pewter plate giving the entire package a stylish appearance.​

Which guitar brand should you choose? It is one of the common questions which arise in every music lover’s mind. The basic answer is to find a guitar which can fulfill which fulfills all your demands and within your budget. However, for an appropriate solution, a user should check out all the features in a guitar before deciding which model to buy.

On some amps with a number of input and output jacks, the jacks may be consolidated in a patch bay. Some amps have an input jack for a foot-operated switch which can be used to turn on an effect or switch to a solo channel. Some higher-end amps have a Speakon speaker jack for an extension speaker. In the 2010s, the Speakon jack is often used in high wattage amplifiers, because the design of the connector, which is shielded from human touch, prevents electrical shock from a high-powered amplifier. Some amplifiers have a "tuner out" jack, for sending the instrument signal to an external electronic tuner. Bass speaker cabinets often have two 1/4" jacks. These are provided so that one speaker cable can be plugged into the first jack and connected to the power amp; if the bassist wants to use a second cabinet, a second speaker cable is plugged into the second jack and then into second speaker.
It obviously wasn’t ideal for guitarists to permanently damage their amplifiers for the benefit of experimental tone. Nor was it practical for them to drag immovably large objects on tours. Luckily, increasing experimentation in guitar sound modification collided with the widespread manufacture of electronic transistors in the early 1960s, which replaced vacuum tubes and integrated synthetic distortion in amplifiers. As the transistor revolutionized computing, it also dramatically simplified the production of guitar effects and amplifiers, allowing compact design and portability with little overheating.
I picked up a Lyle 630L recently for $100. Best playing acoustic I've ever played and sounds awesome, but it has a few issues. First being the fact that it's been played long and hard, with at least 3 frets showing hard wear. I had to tweak the torsion rod and raise the adjustable bridge some to stop a few frets from buzzing, but one is still a stickler. Bridge has cracked between the peg holes but the pegs still stay secure. My thought is to use good epoxy to stabilize it. Any thoughts? Also, leaving the strings taught over the years seems to have warped the body some, but there are no cracks or finish peeling from it. One tuner has been replaced with another style tuner, (looks like crap from the back) and I'd love to replace it.
As a lover of fuzz pedals myself I have both kinds and find uses for them, they sound different and excellent. Other famous fuzz users are Eric Johnson, David Gilmour, Joe Bonamassa, and Stevie Ray Vaughan to name a few. When shopping for a fuzz, try to play as many as you can next to each other, even of the same model. Due to the transistor values the same model pedal can sound and feel very different from pedal to pedal.
In 1944 Gibson was purchased by Chicago Musical Instruments. The ES-175 was introduced in 1949. Gibson hired Ted McCarty in 1948, who became President in 1950. He led an expansion of the guitar line with new guitars such as the "Les Paul" guitar introduced in 1952 and designed by Les Paul, a popular musician in the 1950s and also a pioneer in music technology. The Les Paul was offered in Custom, Standard, Special, and Junior models.[15] In the mid-50s, the Thinline series was produced, which included a line of thinner guitars like the Byrdland. The first Byrdlands were slim, custom built, L-5 models for guitarists Billy Byrd and Hank Garland. Later, a shorter neck was added. Other models such as the ES-350T and the ES-225T were introduced as less costly alternatives.[16] In 1958, Gibson introduced the ES-335T model. Similar in size to the hollow-body Thinlines, the ES-335 family had a solid center, giving the string tone a longer sustain.
We received a quote so promptly and after already seeing so many other rates in the DFW area, I knew instantly that this was the best value. My 8 year old son is shy and even though he was super interested in learning how to play the guitar, I worried that he’d have a hard time connecting with whoever we chose. After about 5 minutes into the lesson, that fear was long gone. Jack was awesome with him and very patient. He showed up right on time which was great because any parent knows that adding one more thing to an already busy schedule isn’t always the easiest thing to do. Great experience so far!
Here’s a fairly comprehensive listing of all Supro guitars and amplifiers. As always, treat the dates with a certain flexibility, but these (for a change) should be pretty close to accurate. In some cases – e.g., the Clipper/Supreme Hawaiian, where the fundamental model stayed the same – they are listed in consecutive order following the original entry to emphasize the continuity. Also, certain salient details are included in parentheses, especially where these can help distinguish model changes. I’ve made no attempt to be comprehensive on these details.
{ "thumbImageID": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "defaultDisplayName": "ESP LTD EC-256FM Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "See-Thru Black", "sku": "sku:site51371482100566", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-1371482100566.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Lemon Drop", "sku": "sku:site51335886296183", "price": "429.00", "regularPrice": "429.00", "msrpPrice": "613.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-Lemon-Drop-1335886296183.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-Lemon-Drop/H90046000001000", "brandName": "ESP", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "See-Thru Black Cherry Sunburst", "sku": "sku:site51371482100552", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst-1371482100552.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst/H90046000002000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }