Boost effects are simple effects that increase overall volume. However, every boost pedal is very unique and often sounds different. It always comes down to the type of components the effects pedal manufacturer used to achieve the volume boost. Some boost pedals try to maintain the guitar tone while providing a volume boost, others can heavily affect the guitar tone while providing a volume boost. Oftentimes, guitarists will get a specific boost pedal and use it as an always-on effect because they like the way the boost pedal colors their tone.
Without the rhythmic pummel of the Slits, there would be no riot grrl, no Rapture, no Yeah Yeah Yeahs; and without Viv Albertine — who played guitar for this groundbreaking U.K. punk band, and wrote the bulk of their early material — there would be no Slits. Albertine’s unrepentantly unpolished guitar stylings eschewed the high velocities and power-chord assaults of her male contemporaries in favor of trebly, dissonant stabs. It all meshed perfectly with the band’s cheeky, confrontational songs, ultimately turning jagged rhythms into something as provocative and primal as anything punk produced.

You couldn’t call it a pedal, but Fender’s tube reverb, in its original or reissued form, has always been considered one of the best spring reverb units around, and can be added at the front end of any amp (although this isn’t ideal if your overdrive sound comes from a channel-switching overdrive preamp placed after the reverb). Other amp makers in the USA and the UK also offered stand-alone reverbs, plenty of which can sound totally fabulous. Fender was actually a little slow getting onboard reverb into its amplifiers, though, and makers such as Gibson and Ampeg offered combos with fantastic sounding built-in reverb in the early ’60s.
Tempo guitars and amps offered in 1971 included three nylon-stringed guitars, three steel-stringed guitars, and two solidstate amplifiers. These were pretty low-end beginner guitars probably imported from Japan, though the heads have a Harmony look to them. The N-5 Folk Guitar ($31.90) was standard-sized with spruce top and mahogany body (presumably laminates), slothead, tie bridge, no markers. The GM-62 Steel String Guitar ($29) was also standard size, “light” top and “dark” back with dots, moveable bridge with saddle and stamped metal tailpiece. The GM-300 Convertible Guitar Outfit ($33.90) was a spruce and mahogany slothead with dots and a glued/bolted bridge which could be used for either nylon or steel strings. It came with nylons and an extra set of steel strings. Harmony made guitars like this for Sears in the early ’60s. The N-48 Nylon String Guitar Outfit ($82.50) was a grand concert classical with amber spruce top, maple body, marquetry strip on the slothead and gold hardware, hardshell case included. The N-40 Nylon String Guitar ($45) was grand concert-sized with amber spruce top and “dark brown” body. The F-34 Steel String Guitar was also grand concert-sized with spruce top, “dark brown” body, belly pin bridge, block inlays, and engraved hummingbird pickguard. Like most things involved with creative pursuits like making music, there isn’t a steadfast right or wrong way to do things, but if you encountered any of the problems above you’re definitely doing things wrong (unless you play in a German nihilist industrial noise band, in which case, go nuts). This article will help you avoid those scenarios by describing some of the basic rules and suggestions for placing different effects in the ideal order in your rig’s signal chain and how to achieve the best possible tones when using several stomp boxes together. If you’ve ever wondered how to put together your own pedal board, this info will give you a good start toward obtaining the best sound and most versatility out of your rig. The Hummingbird Pro's unique look breaks the typical monotonous appearance of conventional acoustics, and it does so without straying too far from the familiar. It is easily identifiable by its uniquely shaped ornate pickguard, which matches the guitar's faded cherry sunburst finish. Whether you are on stage or just jamming with friends, you can be sure that this acoustic will stand out. It mostly comes in black color. it is a right handed 6 string electric guitar. The body is given a polyurethane finish whereas the neck is given a satin finish. The fret board is composed of 24 frets and has a master white tone. The guitar is relatively affordable, with prices ranging from around INR 15,642. For stage performances, this guitar will give you a nice experience and a classical feel. Second in your chain are usually wah or EQ pedals. These tend to do well when directly affecting a distorted signal, and without much else in the mix. If you plan on using a compressor you have a choice: for a more natural rock tone, the compressor works best right after the distortion or wah/EQ effects. If you’re going for that thick classic country sound however, try putting your compressor right at the end of the chain so that it squashes everything. As with many of our services, we do more than just pull and replace your frets when doing a refret. Full refrets include a resurfacing of the fingerboard to proper level (even more precisely done than many factories), repair to any damaged fret slots, nut removal and reuse (when applicable), and full Calibration and Reset service (which includes a full traditional set up). Strat style tremolos add$10 to the price, Floyd Rose style bridges add $30. You can get a rough idea of what the All-Electric looked like in Gruhn/Carter’s Electric Guitars (Miller Freeman Books, 1995), although this example has been refinished and replated, with a new fingerboard, tuners and added tailpiece, and is an atypical 14-fret Spanish model, possibly assembled at the end of the ’30s from leftover parts. Toward the end of National Dobro’s presence in Los Angeles, a great many guitars were assembled and shipped from remaining stock, often as exports. Not many classical guitar concertos were written through the guitar history. Nevertheless, some guitar concertos are nowadays wide known and popular, especially Joaquín Rodrigo's Concierto de Aranjuez (with the famous theme from 2nd movement) and Fantasía para un gentilhombre. Composers, who also wrote famous guitar concertos are: Antonio Vivaldi (originally for mandolin or lute), Mauro Giuliani, Heitor Villa-Lobos, Mario Castelnuovo-Tedesco, Manuel Ponce, Leo Brouwer, Lennox Berkeley... Nowadays, more and more contemporary composers decide to write a guitar concerto. ###### There are quite a few types of guitar shapes, with the most popular one being the dreadnought. However, contrary to acoustic guitars, many acoustic-electric variants come with some form of cutaway for better access to the higher frets. This can really come in handy for a wide range of techniques so you don’t have to play with your hand over the body, which can be uncomfortable. A noise gate is a very handy device that gets rid of hums and hisses that may become apparent when you're plugged in but not playing your instrument. Basically a limiter in reverse, the noise gate simply cuts out sounds below a preset level. As long as you're making music your sound is full on; but as soon as you stop playing, all the noise generated by your effects chain, vintage amp, and/or house wiring is silenced. Barney Kessel was known for playing his Gibson hollow body jazz guitar and used it almost exclusively on his own recordings. But when it came to rock, pop, r&b and blues recording sessions with the most popular performers of the early '60s such as Elvis Presley, Sam Cooke, Connie Francis, T-Bone Walker, Ike & Tina Turner, Phil Spector, Dinah Washington and Bobby Darin, Kessel turned to his Kay Barney Kessel Artist guitar. ## Here is s very nice 1976 Takamine F375s from the laswsuit era with the Headstock shape and logo style font replica of a Martin D-35 Exotic Brazilian rosewood guitar from 1962, An amazing likeness in looks obviously and she sounds sooooo sweet the 40+ years since she was built back in 1976 at the time of this build it has been said that Takamine had used aged woods of at least 20 years aging prior to its construction... this guitar has been extremely well cared for and it has barely a few scratches that will be sort of hard to find, the structural integrity of this guitar is excellent its neck set is excellent as is its action is low and as a result this guitar plays amazingly with no buzz smooth action and a pleasure to play. Frets have been lightly dressed and are nice too. Neck width is 1-11/16ths at the nut with a medium profile it feels like an old Martin to just perfect. It has been set up with a Martin bone nut & saddles set as well as new Martin 80/20 strings set she sings loud and sweet a pleasure to play with rich encouraging tone. This guitar is straight as can be with no cracks or separation on its body or neck with the only exception being its Solid Sitka Spruce top has 2 fine hairline cracks in the top and they do not go threw to the back side and are insignificant and have been properly sealed and buffed and you can not see them until the closest inspection, they are not progressing and have been stabilized professionally years ago. Other that the hairlines you cant see its near mint otherwise overall condition give this a very good to -excellent vintage used condition rating and a great choice fot the lover of these great exotic Brazilian Rosewood guitars, Japan does offer these Exotic Jacaranda Brazilian rosewood bodied guitars today but note they do not come with the OLD school Martin Headstocks or the old style Script logo they have the modern headstock Takamine design and logo oh ya a$4500-6000 price tag as well. You will find that this beautiful Rare guitar is a Bargain priced gem and should be played tonight as it is Ready to tour or Record tonight! .

BTW, Superstition is not played on synth but clavinet, a stringed keyboard instrument with magnetic pickups that are, in this song, actually used like two guitar single coils. — I quite agree with all your arguments, however I prefer HSS on a strat-like guitar as it doesn't have the too-muddy-neck-humbucker problem. On a Les Paul or Tele, a neck humbucker is much more useful of course. – leftaroundabout Jun 24 '14 at 23:28

I wonder if this list shouldn’t be renamed as Best Electric Guitar Brands, since there does seem to be a strong focus on electric guitars in this list. Yamaha does make a very good line of acoustic guitars, and Ibanez and Epiphone also manufacture acoustic guitars, and the Gibson Hummingbird would make any top 10 list of acoustic, but it’s the only one on this list that seems world class for an acoustic manufacturere(other manufacturers on the list may also make acoustics, but I’m not familiar with them) I doubt if they would be considered the best guitars or the most highly respected brands.
{ "thumbImageID": "SG-Special-Electric-Guitar-Cherry/517239000019000", "defaultDisplayName": "Epiphone SG-Special Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51273888007012", "price": "179.00", "regularPrice": "179.00", "msrpPrice": "299.00", "priceVisibility": "1", "skuUrl": "/Epiphone/SG-Special-Electric-Guitar-Cherry-1273888007012.gc", "skuImageId": "SG-Special-Electric-Guitar-Cherry/517239000019000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SG-Special-Electric-Guitar-Cherry/517239000019000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51273888006945", "price": "199.00", "regularPrice": "199.00", "msrpPrice": "299.00", "priceVisibility": "1", "skuUrl": "/Epiphone/SG-Special-Electric-Guitar-Ebony-1273888006945.gc", "skuImageId": "SG-Special-Electric-Guitar-Ebony/517239000035000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SG-Special-Electric-Guitar-Ebony/517239000035000-00-60x60.jpg", "imgAlt": "" } ] }
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
Although PRS offers a range of affordable models (the Korean-made SE Series) and the mid-range S2 Series, the brand is still best known for its elegant high-end signature and custom guitars which are a prominent part of the modern rock and metal scene. As such, PRS boasts a full roster of artists playing its guitars, including John Mayer, Mark Holcomb, Mike Oldfield, Dave Navarro and Mark Tremonti.
I am not satisfied with the sound I am getting from my guitar so I have decided to invest in a new set of strings. I bought an Electric guitar about 1 year ago and have not changed the strings as yet. Since it was not new when I bought it so I do not know how long they have been on it. I am not sure what the gauge of the strings are. I am trying to play lead. Should I go for a .,08 or .09 or a bit higher? I want to do bends as well.

The very first thing to remember about pickups is that the active option is not necessarily better than the passive choice, and vice versa. Each type brings its own set of drawbacks and benefits. Passive pickups might be limited in terms of signal strength and tone shaping, but they are much more expressive in comparison to the active pickups in terms of picking and strumming intensities.

# DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.

The first effect in our signal chain is a pedal wah. A wah is an effect known as a filter that alters the basic tone of the guitar. When you push the pedal fully forward, the filter brightens up your guitar tone and you bring back the pedal your guitar tone gets darker. For the most variety of sound, you want all the other effects to have a shot at the sound from the Wah so the ME-80 places it as close to the guitar as possible.
How are we supposed to choose an Ibanez model? Well, here’s what we went with. Made out of mahogany with a vintage look to appease the masses, the Ibanez Roadcore RC365H offers a retro feel with a modern sound. The f-hole on the lower part of the guitar creates a deep and rich resonant sound, while the neck contains an RC bolt that adds both warmth and depth to the notes. Due to the stringing throughout the body and an improved bridge, tuning becomes easier while switching through progressions, while the rosewood fingerboard presents both style and comfortability. The highly touted feature on this guitar is the custom designed Core-Tone pickup, reducing additional hum and reverberation for clarity in tone. With various tones provided by a three-way selector, this electric guitar offers high-quality features while maintaining a classic rock-and-roll vibe.
Gut strings were the original strings for the classical stylist.  They were literally made from the guts of farm animals, mostly sheep.  The intestines and the process used to make these strings became more expensive than nylon and thus have fallen out of favor.  Even though you may hear the term “cat gut” strings, this style of string was never made from the innards of our cute, cuddly, feline friends… just the beasts we like tend to use as a food source.

Remember that each cited Mark has many different models, some better than others. Above all, the definition of how good a brand or model will depend on the personal taste of its user. When it comes to music, there is a lot of controversy and discussion about what are the best tone, the best touch, and the most beautiful design, ultimately the perception of each person is different. We try here only give direction for those seeking to know good guitar brands. This list is not intended to be exclusive or limiting. Of course, the amount you are willing to pay too much regard to the definition of the right guitar. Soon we will be adding this list marks a bit cheaper and cost-effective. If you think we missed any brand that deserved appear here in the list, send your suggestion to onlineguitarlab@gmail.com.
Thanks for posting the cool video. I have a Decca like that one. Its pickups migrated to my #1 guitar, which is a relative from roughly the same era (early 1970’s), a Daimaru (sunburst, jazzmaster / jaguar copy surf guitar body, tremolo, etc.). The Decca now has one Daimaru pickup (I wrecked the other one when I was a teenager — thinking I was going to ‘improve’ it), but otherwise, my Decca looks basically identical to yours — except for it has the original tuners, and I angled the bridge in the 1990’s. The neat sound you can get from one of these particular Deccas is the placement of the bridge pickup, it’s a bit further from the bridge than a lot of other electrics, which gives it a neat, plunky sound to it — as is apparent from your video.
With the ME-80, Boss has made a unit that’s slightly different than a traditional multi-fx unit. Instead of trying to simplify the interface and make it sparse and clean, it’s immediately evident that there are a LOT of knobs on the front of this unit. The ME-80 is trying to mimic the feel of having a pedalboard full of pedals at your fingertips. This is good, because us guitar players love pedals for exactly that reason - you can just look down at them, twist some knobs, and your tone changes. Instant gratification! Not many guitarists we know like to scroll through endless menus and read text on a tiny screen, much less have to read the user manual cover to cover to understand how to work our gear. We want to twist a knob or two, and we want to play!
When you’re starting to become serious about playing the guitar, the question of “what amp should I get” is bound to pop up. There’s quite a deal of variety out there, with many brands and models, and constant innovation adding new features to choose between with each passing year. It’s enough to baffle even an intermediate player, let alone a rookie who’s just getting started. To ensure that you get the right amplifier for your needs, you’ll first need to know a bit about how the amp’s specifications translate to real life.
There are quite a few types of guitar shapes, with the most popular one being the dreadnought. However, contrary to acoustic guitars, many acoustic-electric variants come with some form of cutaway for better access to the higher frets. This can really come in handy for a wide range of techniques so you don’t have to play with your hand over the body, which can be uncomfortable.
I have a epiphone sg 50th edition and it does great by me in all I do. I play a lot of 60's music and otherwise all I want. It's very versatile and not to mention the cherry red wood grain finish makes it looks really awesome. Everyone I've ever met has bragged on it and I've been offered all kinds of guitars from Washburns to fenders. Just recently I went to a old guitar player of 30 yearsiin my grandfathers neighborhood and he absolutely loved the tone and playability. He said the only thing it might need to make it better was a professional setup which I'll soon be getting. When I first got it I complained a lot that the strings were a bit harder to push down due to the longer scale of the neck (the neck on it is pretty long) however. If you' work with it for about 2 days off and on its no problem. I love epiphone and judging from what I've played in ibanez guitars I might soon invest in one of them.
One step up is the combination of a treble cut and a bass cut, with a single knob to select between them, like the one in the Electro-Harmonix Big Muff (Figure 2). The knob selects a blend of highs left over from the bass cut side and lows left over from the treble cut side. If you make the cut frequencies of the treble and bass sides far apart, you get a persistent midrange scoop, as in the original Big Muff. You can also have the bass and treble sides overlap in the middle and get a midrange hump in response. The near-endless variations you can get by tinkering with the relative values of the parts and the need for only one knob make this a favorite in effects.
We would also recommend starting off with a DIY guitar pedal building kit. We created a list of the best DIY pedal kits here. Places like Mammoth Electronics and Build Your Own Clone (BYOC) have some fantastic sounding kits available – they even come with a step by step guide to lend you a hand along the way. Even Amazon has a killer tube drive pedal kit!
Epiphone offers one for every guitarist out there and has a product lineage featuring electric, acoustic and other options. One of its famed options among the acoustic line is the Les Paul Ukulele, a true vintage piece. The guitar has been termed as the market leader in the acoustic guitar field. It comes with mahogany body facilitated by top laminated, rosewood fingerboard and maple top. The tone of the same is truly resonating.
The Dobro Standard Guitar is not shown, but this is described as a “…conventional arch top body” with Dobro electric amplification. Like the first National Spanish, this had f-holes and was made by Regal. The Dobro Mandolin is also described as having a “conventional” body, probably a pear-shaped mando, again, by Regal. These were probably introduced slightly later than the Hawaiian.
As with drive tones, many guitar amplifiers will come with reverb built-in. As such, you may have an idea of the type of effect it is already. In pedal form though, there are companies taking things to new heights by embracing reverb as a gloriously creative tool in its own right. Not just something you add on as an afterthought. Strymon, the American pedal brand, are the masters of this as you’ll see in their Blue Sky (reviewed here) and Big Sky (reviewed here) pedals. Both offer a host of unique, interesting and quite incredible sounding reverbs which will alter your tone in all kinds of wonderful ways.
In 2017, Slash was named Gibson Brands' first Global Brand Ambassador. And to celebrate, Slash has designed his first Signature Firebird for Epiphone! Slash’s Limited Edition Firebird features the classic Firebird profile that has gone virtually unchanged since its debut in 1963 and is made with a AAA Flame Maple top and a 3-piece Mahogany body in a Translucent Black finish chosen by Slash. The traditional Firebird style pickguard is layered white and black and has Slash’s “Skull & Top Hat” log in red. The Mahogany neck is glued to the body with a deep-set neck tenon and has a standard 24.75" scale and a rounded custom "Slash" profile. The Pau Ferro fingerboard has single-ply cream binding with Pearl trapezoid inlays, a nylon nut, and 22 medium jumbo frets along with a 2-way adjustable truss rod. The back of the Firebird's traditional reverse headstock has Slash’s Snakepit logo in gold.
While you don’t have to mortgage your home to buy a good guitar, price will still be a key factor in deciding which guitar to purchase. When buying for a beginner—especially younger players—you may be hesitant to spend too much without knowing if the recipient will stick with the guitar. That’s perfectly reasonable. There are guitars to fit just about every budget. Just keep in mind that the better the guitar the new player starts with, the more likely they will be to continue learning and playing. An instrument that’s hard to play or won’t stay in tune will deter even the most enthusiastic beginner.
The Ibanez Artcore AS53 is a semi hollow-body guitar created for guitar players from diverse genres as blues, country, rock and jazz. The guitar feels nice and has a compact and comfortable body. The tone is rich, warm and full. If you are looking for that fat hollow body sound, this guitar makes it possible to switch from jazz to every semi-hollow rocking style of music. A combination of quality and affordability.
##### Reverb creates a sense of space, but it also increases the perception of distance. If you need something to appear at the front of a mix, a short, bright reverb may be more appropriate than a long, warm reverb, which will have the effect of pushing the sound into the background. If you need to make the reverb sound 'bigger', a pre-delay (a gap between the dry and wet signals) of up to 120ms can help to do this without pushing the sound too far back, or obscuring it.

Epiphone's offering in the low and mid-range segment has been pretty strong for years. The Epiphone Hummingbird Pro is their take on a legendary Gibson model and it brings much of the same qualities. What really makes this acoustic-electric stand out is the overall level of quality you get for your money. You can trust it as an accurate emulation since Gibson now owns and produces Epiphone's guitars.
If any item fails to meet your expectations at any time, please return it for a refund or exchange. From tuners to endpins, everything we sell at Stewart-MacDonald is backed by our rock-solid guarantee of satisfaction. This is how we do business, ever since selling our first 5-Star Banjo Head in 1968. We proudly continue this tradition by offering quality products and standing behind them.
This guitar is one of the most appreciated units on the market at the current time. This unit is prized for the fact that it comes equipped with a particularly sturdy body that has been made out of solid wood. Even more so, the body of this instrument was constructed using mahogany, hence its durability, while its top part contains maple. Consequently, this unit is glossy and has an appealing clear-cut design that you are prone to enjoy.

Before we wade in, please note that National Dobro and subsequently Valco, more than most other manufacturers, were notorious for putting together guitars with parts left around. This, combined with the fact that they routinely used components (especially bodies) provided by other manufacturers, means that you are likely to find instruments with details inconsistent with catalog descriptions, and they may just be Kosher.
I've had my Dorado, model #5986, serial #41 since 1972 and have used it for classical guitar study off and on since getting it as a gift. For what it is, the sound quality and playability are quite good. I'm donating it to a church rummage sale tomorrow (6/3/07) and will remember it fondly. I have an Alvarez Regency, similar to the Dorado, which lacks the sound character.
So, which are the best budget electrics guitars available today? We've gathered a selection of the electric guitars that we reckon offer the best bang for the buck in the sub-$/£500 market. You may recognise some of the perennial budget classics (hello - again - to the trusty Yamaha Pacifica), but there's a raft of high-scoring options out there for the more adventurous. The output of the rails is a crunchy, high sustain rock tone that turns your Strat into a much heavier and hard-hitting instrument. The pickguard, pots and five-way volume selector are all included with the wiring taken care of. It’s also really easy to change pickups using a solderless method that allows you to remove and add pickups by simply using screws. 700-Series, which are all solid-bodies are probably worth$250-$350, maybe a little more for the 4-pickup 742 model. I’m pretty sure that they were on the market at the same time as the 800s but not as many are being seen. Since the 800s were a step-up in quality compared to previous Kents and the 700s used similar design features, they should be pretty decent instruments. Although collectors haven't shown a lot of interest in them, rarity has to be considered an influence on the price at this point.Recently a 742 sold on Ebay for over$1000 and a 740 recently sold for $999. Previously most of the 700s had been selling for$200-400.

##### For under £400 you get a set of Paul Gagon-Designed Alnico Pickups which provide a massive sound ranging from smooth and cool surf rock to all out grunge distortion. The AW4470B humbucker in the bridge position is complemented by an AP4285B P-90 neck pickup which ensures you have an array of tones at your fingertips – ideal for clean and distorted amplifiers. The addition of a push/pull coil tap allows you to split the humbucker so you can enjoy the classic sounds of a single coil. A mahogany body and maple neck provide the resonance, depth and snap you need for a wide range of tones and the G&L Saddle Lock Bridge with its six individual saddles offer incredible intonation as the saddles actually lock onto the strings.

While I’m on the subject of guitar myths... Many sellers of vintage Japanese guitars have been throwing around the term “lawsuit guitar”, although not usually in reference to Kents. In 1977 the Norlin Company, which owned Gibson at the time, sued Elger Guitars, which was the U.S. distributing arm of Hoshino Gakki of Japan. The suit claimed that Hoshino-made Ibanez guitars too-closely copied the headstock design of Gibson. Just the headstock. By the time the suit was brought out, Hoshino had already changed to a headstock more closely resembling what was on Guild guitars of the time. So it was pretty easy for Elger Guitars/Hoshino to promise not to copy the Gibson headstock anymore.
I was at a friends house and he had a couple of his guitar playing buddies over. We got to talking about guitar repair and setups and such. Then one the guys said “the guy I use is the be...st ever...”, and I was all like, “yeah I’m sure the guy you use is great, but the guy I know is better”. This went on, back and forth for a few minutes, when he blurted out, “I use the Cigainero brothers...”. I said “cool, me too” See More
All of the guitars on this list except for the Blueridge BR-160 are equipped with an electronics system that make them stage- and studio-ready. You can simply plug and play when you need to perform in front of an audience in a crowded or big venue where there’s a lot of ambient noise. If you don’t need amplification – for example if you’re just practicing at home – these guitars sound great unplugged as well.
It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join[citation needed]. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.
If you've ever opened up a non-digital pedal - for example, a fuzz pedal - there's a good chance you will have seen a dizzying array of tiny components. However overwhelming this looks, however, there's probably only a relatively small number of component types present - and on boutique or older pedals, these should be even more clearly identifiable.

# The PRS SE Standard 24 is one of the stand outs in this line, a straightforward dual humbucker guitar with the same attention to detail as more expensive PRS instruments. It starts off with a mahogany body that is elegantly carved double cutaway shape that PRS has made their own, paired with a 25" scale length mahogany neck. The 24-fret rosewood fingerboard has a slightly wider nut width of 1.6875", while PRS' distinctive bird inlays serve as fret markers. Other features include PRS-Designed Vintage humbucker on the neck and PRS-Designed HFS humbucker on the bridge, both of which are wired to a volume and tone knob, as well as a 3-way pickup selector.

Guitar amp and FX plug-ins are very advanced nowadays to the point that you can actually record “clean” by plugging your guitar straight into a mixer or interface, and add a plugin like Guitar Rig, Amplitube or Waves GTR as an insert. You will hear this effect as you play but without any risk of feedback, since no mics are live in the room. This approach also means you can tweak and change any aspect of the sound post-recording since the raw recording is actually completely dry.
Here's a fresh one from the JVG Vault... vintage tone much like an old classic Martin Acoustic has some wear and has the "feel" just feels great in your hands and plays & sounds wonderful. Good volume and rich sounding lows and very nice.. condition rated at a solid 8.5 / 10 or better no cracks no repairs and plays nicely with original nut & saddle still in place , optional change nut & saddle & set up add $80.00. Please SEE MORE FULL SCREEN HIGH RES PICTURES HERE: https://picasaweb.google.com/gr8bids/70sYamahaFG140RedLableLikeFG180?authkey=Gv1sRgCIHmw573kYa6HA#slideshow/5634523767539294722. Though because of this flexibility, it can be hard to figure which of the many types of electric guitar is going to be a good fit for your needs. Thankfully, if you’ve arrived at this article you’re going to get all of the information that you need to make an informed decision on which body styles are going to be worth considering for your genre of choice. Tube amp distortion is created when tubes are overdriven by receiving more juice than they can handle, thus causing the signal break up. Tube-driven amplifiers are still in demand by seasoned players because of the warm, musical tones they create, and some distortion-type effects use actual tubes to replicate that sound. But most distortion effects are produced either through analog solid-state circuitry or digitally. The use of two or more mics is likely to result in other phase issues when these mics are combined in the mix, since they will almost certainly be capturing sound waves that reach the mic capsules at slightly different times. Whether such issues are bad enough to cause a problem (or even be heard) depends on the situation. First, if your two mics sound odd and hollow and/or lacking in low-end from the outset, flip the phase of one (usually via a switch on the preamp or afterward in your DAW) to ensure you aren’t trying to blend two mics that are reverse-phase in the first place. If your two-mic sound goes from hollow and thin sounding to fat and full, you had a reverse-phase issue. If it doesn’t improve – or gets worse – you need to consider other remedies. Once you know that both mics are at least in phase with each other, you can improve their phase relationship even further by moving the position of one around until any other sonic oddities are less obtrusive, which is simply determined by finding a pair of positions that are really smoking tone-wise. Their are also guitars made with a "compound radius", which is a little rounder in the lower register, and a little flatter in the higher register. The true best of both worlds. Warmoth makes necks with a 10"-16" compound radius, as do some production guitar companies. I have a custom made guitar with a 16"-24" compound radius, and it's REALLY flat. Takes some time to get used to. It's breeze to rip on, but not nearly as comfortable to play rhythm on as my other guitars. Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used. That is true, but without the many fine guitarists of today, who will inspire the gifted musicians of tomorrow. Musicians are artists and it would be quite dull if they all copied each other and sounded the same wouldn’t it? Whether we like it or not the world keeps on spinning regardless of what we want, think or do. Enjoy the gifts that are shared today, because we’re not guaranteed a minute more. According to Longworth, Martin began to use built-in Schaller Straploks beginning with guitar #2085. However, the example shown here is #1034, the thirty-fourth made if #1000 was indeed the first, and it has the Schaller Straploks, which are original. Pot dates are late 1978, confirming that it’s probably one of the early examples. The serial number on #1034, by the way, was printed on a piece of tape in the cavity under the neck pickup. The control cavity had “EM-18” stamped in it. This is the Autumn Brown El Dorado. The finish is outstanding, and it’s also very easy to handle at only 7 lbs. We used 24 extra fat frets. Dual humbuckers provide the sound, and it comes with a whammy bar. We used gold hardware to complement the nice finish. Like other Big Lou guitars, this one features our 1 7/8″ nut width and 8mm string spacing. The construction involves a “set” neck, so it can’t be swapped out, but the factory is ISO9001 certified, so this guitar is a very high quality instrument. Considering the price at$379, it’s a great value. I really tried to keep the cost down, but that arched top costs a small fortune to build. If you can make a statement by playing, that’s the best. But if your still in training, this guitar will make a statement just sitting there. I took the first one off the assembly line for myself. I had to have it.
This comment is directed towards the video of the gentleman changing guitar strings. I have an LP Junior, so I don't thread my strings through the guitar body. But I'm curious why he is turning the guitar completely over, flipping the guitar towards himself each time when he could in fact just lean the guitar away from himself, leaving the back of the guitar facing him? I know that seems a bit nit picky, but it would be tremendously more efficient just leaving the guitar on its side with less risk of the string damaging the guitar surface. Any thoughts or am I just missing something?

I just recently started to try to" really learn" to play guitar. I've known a few "not too difficult" songs for years. Now at 45yrs. old I bought a couple of cord books and it's bittersweet. It's such a wonderful feeling to play songs all the way to the end with a friend of mine who told me years ago that I had a good natural musical ability. I've learned more in 3 or 4 months than in 25 years. But enough about that... I was handed a jumbo GUILD from I believe around the early 70's. I've never heard anything like it. I must have one!!!
And you should still be able to take it to a certified Martin repair person. There may be some issue given how long you have had the instrument, however, if there is no evidence of the problem existing when the guitar was new. But it is worth checking out. Martin has changed policy in recent years regarding what voids the warranty and what does not. But if things are as you say, they should have taken care of the issue a long time ago. And they may still be willing to under your warranty. If not, you may be able to find someone who really knows what they are doing to fix the issue – which may require a neck reset, but would be worth it in my opinion. Good luck!
While a little on the pricey side, their products are seen as particularly powerful and reliable overall. The H&K Trilogy is well appreciated for its versatility, allowed by the high level of German technology and engineering involved in its construction.  It has easy MIDI control and three channels, a clean, crutch, and lead, all with boost options that give a lot of freedom to musicians who are into experimenting.
Paul Reed Smith is a relative newcomer having been born just 2 years after the Stratocaster was created, and founding PRS Guitars in 1985, but in that relatively short period of time PRS have made a huge impact on the guitar world, have been used by the likes of Carlos Santana, Ted Nugent, Dave Navarro. and Mark Tremonti, are now the 3rd biggest electric guitar manufacturer in the USA, and have earned their place among the best electric guitar brands.

This guitar is one of the most appreciated units on the market at the current time. This unit is prized for the fact that it comes equipped with a particularly sturdy body that has been made out of solid wood. Even more so, the body of this instrument was constructed using mahogany, hence its durability, while its top part contains maple. Consequently, this unit is glossy and has an appealing clear-cut design that you are prone to enjoy.
{"pageName":"[mf] pdp: epiphone les paul special vintage edition electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"silver,36-month,24 month","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";J40301","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] product detail page"}
On PremierGuitar.com, "Sponsored Content" refers to articles, videos, or audio recordings that are produced or curated by an advertiser but that Premier Guitar is happy to share alongside our own editorial content due to the Sponsored Content’s educational, musical, or entertainment value. Sponsored Content is clearly labeled everywhere it appears, and Premier Guitar's editorial department has no involvement in its creation.
Hughes & Kettner is another new comer that's making really good progress in the market, thanks to the surge in popularity of their TubeMeister line of low-wattage tube amps. For a company that just started in the mid '80s, this is an incredible feat, and it seems like they are not letting up because they continue to get good market feedback from users and experts alike. This is mostly due to their commitment to building quality tube driven musical equipment, the same commitment which inspires their latest guitar amp models. Nuno Bettencourt, Alex Lifeson, Tony Macalpine, Allan Holdsworth are just a small sample of big name guitarists who help further expand the company's reach.

# While continuing to keep the E string depressed at the first fret, move up the neck from the 12th fret to the end of the fretboard, continuing to depress the string at each of the successive frets. As you move up the fretboard, watch if and how much the distance between the bottom of the string and the top of the frets in the 6-7th fret range changes, if at all. The less the gap rises, the flatter, overall, the neck is. Using this method you may discern that there is more curve in one area than another, and not necessarily centering on the 6-7th fret area. In some cases this curve will be resolved by changing the tension on the truss rod. In other cases, adjusting the truss rod tension will not resolve them, and fret leveling, refretting, or heat bending the neck(rarely) may be necessary.

Most users are happy with what they got for the money, from its wood quality, to the included hardware and electronics. As expected, many of its buyers are fans of the Les Paul Jr who want to try their hand at customizing their own straightforward rock machine. Surprisingly, there are some who are happy with its default configuration, including the feel of the neck, the sound of the P-90 pickup and the quality of the tuners.
Loop-based guitar plugins are slowly moving to the point of obscurity as virtual instrument technology is getting to the point where even string instruments can sound out-of-this-world good and blossom with character. But there still exists some gems out there such as Acoustic Revolutions, which updated to volume two as recently as 2015, doubling the number of loops.

## A question which causes much thought and divide! Catch 22 to a degree: you can't play songs till you've learnt some chords, but just knowing some chords will mean you actually can (though you are not aware of it) play loads of songs. There is a plethora of songs out there with only three chords (some with only two!). Their differences are that the order of chords is slightly different for each - with the exception of the thousands of 12-bar tunes!

For several years now Godin have been producing some of the most sonically versatile guitars available with their combination of regular pickups, piezo pickups and synth pickups built into their higher end guitars. Note that the synth pickups are 13-Pin and compatible with the Roland GR series guitar synths - if you want MIDI you have to first plug into a Roland synth then take the MIDI out from the synth.

Here we have a Taylor guitar for under $500. Taylor is known for their high quality, and expensive guitars. It’s great that they are offering a lower priced model so more players can enjoy their great sounding guitars. The Big Baby is a 15/16 dreadnought sized guitar which is slightly smaller than a full sized. Perfect for those that want that dreadnought sound but want a little smaller body. The top is sitka spruce and the back and sides are sapele. Owners are saying that the guitar has a very warm and full bodied tone, and that it does not sound like a cheap guitar. This is no surprise given that it is made by Taylor. This is another great choice for those with smaller hands, as Taylor’s are known for their great necks and amazing playability. See more info including more pictures here. Frets are the metal strips (usually nickel alloy or stainless steel) embedded along the fingerboard and placed at points that divide the length of string mathematically. The strings' vibrating length is determined when the strings are pressed down behind the frets. Each fret produces a different pitch and each pitch spaced a half-step apart on the 12 tone scale. The ratio of the widths of two consecutive frets is the twelfth root of two ( {\displaystyle {\sqrt[{12}]{2}}} ), whose numeric value is about 1.059463. The twelfth fret divides the string in two exact halves and the 24th fret (if present) divides the string in half yet again. Every twelve frets represents one octave. This arrangement of frets results in equal tempered tuning. You’ll need to get yourself setup with an account on some of the web stores selling components such as effects pedal specialty stores listed above, and some general component stores such as Mouser and Digikey. AMZ provides a list of the components required for each project. Make sure you check carefully the component requirements such as type of capacitors. Many components may have suitable electrical values but different physical layouts, so use the datasheets for your chosen component. Measure the spaces and holes on your PCB to make sure the components will fit. Remember that you’ll also need an enclosure in which to install the finished circuit and don’t forget things such as knobs, battery holders etc. The pedal rocks forward and backward like a see-saw as you rest your foot on it. Move the pedal to get the wah effect. On some pedals, there is a switch under the toe end to switch ceon straight-through (no effect) to using the wah effect. This means that when you switch it on, it's always in the "aaaa" position. You can hear this in some of Hendrix's work. The first Touch Guitar Invention started in 1959 with the filing of patent #2,989,884 issued in 1961 as the first touch tapping instrument which could be played on two separated necks Simultaneously by muting the strings at the distal end of the neck along with numerous other claims. Until 1974 it was known as the DuoLectar and with a new patent "the "Electronic Mute" has been known as the "Touch Guitar. It is held in the normal way over the shoulder and design with the left hand playing the lower bass neck in a traditional way and the right hand playing over the top on a neck which has a wider string spacing allowing the hand to be used in both vertical and horizontal angels to the strings. It is absolutely off at all times, until Touched or picked. Their are also guitars made with a "compound radius", which is a little rounder in the lower register, and a little flatter in the higher register. The true best of both worlds. Warmoth makes necks with a 10"-16" compound radius, as do some production guitar companies. I have a custom made guitar with a 16"-24" compound radius, and it's REALLY flat. Takes some time to get used to. It's breeze to rip on, but not nearly as comfortable to play rhythm on as my other guitars. I love this guitar! I am so happy with this axe and haven't put it down since it arrived. I don't think that you will find a better value in the Martin lineup, especially for an all solid wood guitar and a free HSC. People complain because this wasn't made in the USA, but I don't think that anyone would complain after playing this beauty. The action right out of the box was perfect, just like any high end Martin should be (plays like my HD28 and D18). This thing plays like butter and is silky smooth. Some people complain about the stratabond neck, but I love the feel of it and it is rock solid and should last forever! The finish and style of the guitar is very minimalistic, which is something that I love. It may be too plain for some people, but I love it. Something just First Act is a very peculiar guitar company. They have guitars that sell at Toys R Us that will literally fall apart in your hands. They sell pedals that are a complete joke, leaving you with the impression that they must be a bad, bad joke. Then something strange happened, I did a little research and found some info that was stunning. First Act has a couple of guitar lines that are some of the finest guitars I have ever seen, heard, or even read about. They have guitars that go for$3000 plus and are better guitars than any person commenting on this board will ever have the opportunity of even being in the same room with (including myself) Who would have thought?! Go figure.
Nickel finish Frequensator style split trapeze tailpiece. This split fork design originated on archtop models from the 40's. The difference in fork length alters string tension behind the bridge to add depth to the bottom strings and brilliance to the top strings. Width of plate with mounting screws = 2 17/32 in. (64.3mm). Length of mounting bracket side with mounting holes = 1 39/64 in. (41mm) from end to bend Length of mounting bracket from bend to trapeze hook tops = 1 13/64 in. 30.5mm.) Length of short trapeze to top of string retainer bar (not including nut heights) = 2 1/2 in. (63.35mm). Short bracket width = 1 3/64 in. (26.65mm). String Bracket width = 1 3/16 in. (30.35mm). Length of long Trapeze section including string bracket = 6 in. (152mm). Widths of each trapeze and string bracket are equal.
There’s a lot of knowledge here to digest, so the best advice anyone can give you is not to sweat it too much. You aren’t going to become a pedal encyclopedia overnight, and even if you could, you’d be missing out on the fun experience of trial and error that comes with figuring out your first pedals. The truth is that some of the most distinctive guitar and bass effects ever recorded have been the result of artists experimenting with effects units they’d never used before – especially in the 1960s, when pedals were brand-new to everyone.
I love squire guitars because they are cheap and affordable. I love the fact that I now have a stratocaster so if you think that they suck think again. I can play under the bridge and scar tissue etc on my squire stratocaster honestly for those that can't afford a fender this is the best thing that has ever happened to me because I can now play an electric guitar which is not only good but it is brilliant
Acoustic amplifiers produce an uncolored, "acoustic" sound when used with acoustic instruments with built-in transducer pickups or microphones. The amplifiers often come with a simple mixer, so that the signals from a pickup and condenser microphone can be blended. Since the early 2000s, it has become increasingly common for acoustic amplifiers to provide a range of digital effects, such as reverb and compression. As well, these amplifiers often contain feedback-suppressing devices, such as notch filters or parametric equalizers.[22]
Low frets aren't a bad idea, and Carvin is a very good brand for guitar, amp, etc. To me, it seems that the neck shape is going to be very important for you. Double-check what Carvin's return policy is, and if you think it will work for you (whatever it is) then I would totally say go for it! The caveat is that I would bring it to your local music store for them to do the setup, setups and intonations usually need to be done after shipping, and you'd need to have it done if you were changing string gauges anyways, so....
Plugged into a Fender blue deluxe, this instrument immediately proved to be a love at first riff. The humbuckers sounds so amazingly, and coupled with great and rich percussive and natural full tone, that overall sound that emanates from this instrument is far beyond what is normally expected for a beginner’s piece. The fact that it is made in China has nothing to do with its quality. This might just be your favourite new ax.
On the other hand, practicing with your band should allow you a bit more flexibility with sound. You can ask the rest of the band to accommodate for you a little, lowering the sound on their own instruments (ask the drummer to be nice to the drums). Even during an all out practice session a small amp might be able to keep up with the rest of the band’s volume, if powerful and high quality enough.
The body is pre-drilled and crafted from basswood, while the maple neck is meant to be glued into the neck joint, something that requires a bit of care and precision. Because of its hollow body design, installing electronics can be a bit of a challenge, but very doable as attested to by reviews. Note that wood is raw and unfinished, so you'll need a bit more sanding and patching before you paint on it.
In 1967, McCartney gave his 4001 a psychedelic paint job, as seen in the promo film for Hello Goodbye, and in the Magical Mystery Tour film.[7] A year or so later the finish was sanded off; a second over-zealous sanding in the early 1970s removed the “points” of the bass’ cutaways. McCartney predominantly used the Rickenbacker bass during his time with Wings, until the late 1970s.

CF Martin & Co: When CF Martin & Co first started business, America only had 24 states in its union and Andrew Jackson had begun his second term as president. CF Martin & Co has seen two world wars, and huge economic peaks and troughs. The history of this guitar company is unlike any other, it’s the world’s oldest surviving guitar company in the world and the reason for so is they indeed make excellent guitars. When you own a Martin guitar you don’t just own a guitar, you own a small part of history.
As for necks, the majority of guitars will have either a maple or mahogany neck, with a rosewood, maple or ebony fretboard. Again, there’s no right or wrong, and a neck wood is never going to sway your decision. But you should choose something that feels smooth and comfortable to play. There are a variety of shapes and profiles, and what you go for will depend on personal preference and playing style. For example, a modern C-shaped neck is always a safe choice as the majority of guitarists will feel comfortable using it, while a thin U-shape is great for faster players (think punk rock and metal).
The Neoclassical Speed Strategies for Guitar is another book we’d recommend more for the seasoned player. This one provides an excellent introduction into fingerpicking with helpful illustrations of exactly how to position yourself for the quickest and most efficient playing. It includes lots of helpful examples and exercises to make it easier to master.
You want this before all of the remaining effects because you want, for example, a distorted signal to be delayed, not a delayed signal to be distorted. You can try it the reverse way but you'll end up with varying results since the gain will change during reverb tails, decaying delay echoes, and crazy chorus or flanger effects. And since these effects in this group rely on gain, you want to feed them a consistent and high gain signal, which gets reduced by other effects.

Description: Body: Mahogany - Body Construction: Solid - Neck Wood: Maple - Neck Construction: 3 Piece - Nut Width: 43.2mm - Fingerboard: Rosewood - Frets: Bound, Jumbo - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Gibraltar/Accucast - Hardware: Black - Pickups: EMG 81/85 - Pickup Configuration: H-H - String Instrument Finish: Black
All that being said the best guitar is the one that allows you to express yourself to the best of your ability and makes you feel good doing so. If you need a custom shop Les Paul to do it then by all means go for it. If a Godin or Ibanez or Dean or Jackson is the one for you who are we to tell anyone they are wrong. Personally I think the best guitarists on the planet play Telecasters! :-)

The JEM70V is a Steve Vai signature model based on early JEMs he helped create. It comes with 3 different DiMarzio Evolution pickups that were handpicked by Steve Vai himself to give him the various tones that he needs for his expressive solo work, and intricate rhythm textures. The body is crafted from basswood, while the low profile 5-pc Maple/Walnut and 24-fret, 25.5" scale length rosewood fingerboard provide the fast playability expected of the brand. Other features include the Edge tremolo, 1.69" nut width, tree of life inlay, and it comes wrapped in Seafoam green finish.
Cort, a South Korean manufacturer of musical instruments was founded in 1973. Cort specialises in Electric guitars, Bass guitars and Steel-string acoustic guitars. The hallmark of the company is its elegant series of Electric guitars. The Classic rock series, G, M, CR and X series guitars, Sunset series and Zenox series form part of the list. These guitars not only deliver high performance, but also have a great look and feel. It has established its brand name in Indian market by offering high-class products at affordable prices. The company is amongst the best guitar brands in the country.
A chorus effect alters the duplicated waveform in a more subtle, nuanced way. The altered waveform will sound much like the original, but just different enough to sound like multiple voices playing the same note or notes. As it is usually applied, chorus sounds like the same signal running through two amps with a very slight delay between them. In fact, Pat Metheny's famous chorus sound is produced in exactly this manner, using no actual chorus effect at all.
Three recording sessions between 1936 and 1937 produced 29 songs, including the verifiable classics “(I Believe I’ll) Dust My Broom,” “Sweet Home Chicago,’” “Walkin’ Blues,” “Love in Vain” and “Crossroad Blues.” His popularization of cut boogie patterns presaged electric Chicago blues and rock and roll, while his fretted and slide guitar licks are so timeless that they still show up in contemporary music.
The auditorium style is a standard mid-sized acoustic guitar, with a lower bout that is generally the same width as a dreadnought, but with a smaller waist. Sometimes referred to as an "orchestra" body, these guitars balance volume, tone, and comfort, and have been regaining popular ground in recent decades. In 1992, Eric Clapton used an acoustic guitar of this body size, when he appeared on MTV Live to record his Unplugged album.
The list of musicians who are (or who have been) in love with their vintage Fender Bassman amps—especially the 4x10 tweed variety made between 1957 and 1960—is pretty much endless. Just for starters (past and present), there's Eric Clapton, Buddy Guy, Mike Campbell, Mike Bloomfield, Jimmie Vaughan, John Fogerty, Josh Homme, Brian Setzer, the guy up the street from me... . Again, this is just the tip of the iceberg, people. After all, many professional music industry analysts have heralded Fifties 4×10 Bassman amps as the greatest amps—ever.
Native Instruments Guitar Rig VST plugin offers a free collection of various rack stacks that lets us try out typical effects setups of recent years. It can run in a DAW host or as a standalone. Do a Web search for "best amp synth" and you'll find more about what's happening with amp emulators -- along with maybe a link back to the excellent recommendations found in this thread.
If you're looking for one of the best Strats Fender has to offer, be sure to check out the Fender American Professional Stratocaster. Developed with pickup master Tim Shaw, its brand-new V-Mod single-coil pickups are voiced specifically for each position, mixing alnico magnet types to produce powerful, nuanced tones with original Fender sonic DNA. For metal guitarists, have a look at the Jackson JS32 DKA electric guitar. Swift, mean, and easy to play, this guitar offers classic Jackson tone and playability at a more than affordable price. If you're looking for a Les Paul guitar, a great choice is the Epiphone Les Paul Custom PRO electric guitar. If you're ready to step up to a Gibson Les Paul, the 2019 Gibson electric guitar lineup is in-stock.