Super info. thks. Just found your site as I too, had some questions about action. I have a Martin D-28, manufacture date late 2013 and I purchased new in Feb. of 2015. It has always been humidified and kept in the case. I only really noticed the ‘high’ action when I changed to drop D tuning and I noticed amplified ‘string whip’. I estimate the height to be 4mm. I re-tuned and looked again and the action is noticeably higher than my Epiphone EJ 200 and Simon & Patrick Woodland Folk. I think, as you have said, the guitar is just getting acclimatized to it’s ‘new’ home. Play ability is still good, (although the player needs work!) but I think I will take it back to Folkways Music to have the Tech take a look. Thks. Great site, I will bookmark it!
“Take a humbucker wound with 42-gauge wire as a benchmark. With an Alnico II magnet, it would have a warm, soft bass response, a very sweet high end and a slightly pronounced mid- range. Alnico III, funnily enough, is not quite as strong as Alnico II. So, the highs tend to be more muted and rounded. Probably the best way to imagine the sound of Alnico III is to think of the early 1950s when this form of magnet was very common. Think of the sounds of the jazz and clean guitar tones from that time – that plummy roundness.

This page contains information, pictures, videos, user generated reviews, automatically generated review and videos about Washburn XM DLX2 but we do not warrant the quality, accuracy or completeness of any information on our web site. If you have more information about Washburn XM DLX2 please write a review. Some reviews are automatically generated generated by using verbal representation of publicly available numeric rating information musicians entered while writing review of Washburn XM DLX2. User generated reviews of Washburn XM DLX2 represent opinions of credited authors alone, and do not represent Chorder's opinion.


{"pageName":"[gc] pdp: el dorado vintage leather guitar strap","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: accessories: fretted instrument accessories and parts","prop1":"[gc] shop: accessories","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories","prop4":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";361091;;;;evar65=New-Accessories-El Dorado","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}
So you decided to play electric guitar. Once you get a guitar and an amp, the next step is to explore effects. Effects pedals can be separated into groups based on their functions. Understanding the different pedal groups is the key to getting the best sound when chaining them together. The largest pedal group is probably overdrives and distortions, and BOSS currently makes 16 different pedals in this category. For our example pedal board, we’ll pick the ST-2 Power Stack. Another category with many choices is modulation.These are effects like flanger, phaser, chorus, tremolo, and others. Let’s use the most versatile of these—the BF-3 Flanger. Another group is ambience effects, such as delays and reverbs. We’ll use one of each: a DD-7 Digital Delay and the FRV-1 ’63 Fender Reverb. There are some pedal effects that can add notes or alter the pitch of what you’re playing. For want of a more esoteric name, we’ll call these “pitch-altering” pedals. From this category, let’s throw in a BOSS OC-3 Octave. BOSS also has a few pedals that make your instrument sound like some other instrument. The AC-3 Acoustic Simulator will do the job. Some effects change your sound with filtering. This effect type can be used in different places in the signal path, so we’ll use the GE-7 Graphic EQ. A few BOSS effects defy categorization, but are nevertheless very useful in any signal path. The most common of these is the CS-3 Compression/Sustainer. Loopers fall into this category also, so let’s add an RC-3 Loop Station to the mix. And you might want the NS-2 Noise Suppressor to kill the noise in your rig, so let’s add that in, too. What about a tuner? The TU-3 is the most popular pedal tuner in the world.
Hopefully now you have a good idea of what to look for in a multi-effects pedal, and what criteria we judge one on. We made this list by going through dozens of forum threads asking for best multi-effects pedal recommendations (we ended up with an initial list of 45 different recommended pedals), and tallying up the ones mentioned the most. We then researched the top 5 by reading as many user reviews as we could find, and went out to test the top 5 ourselves. Here are the winners.

The first two Cordobas we’ve featured have been cedar-top guitars. Now we come to the C7, which is available in both spruce and cedar (see item 7). If you hadn’t noticed by now, the “SP” or “CD” abbreviations in the Cordoba listings indicate the wood that the front of the guitar is made from, so that should help you in the future when looking for a particular guitar with a particular sound, just with the factory-supplied strings alone.


The truth is that you can play any genre of music with just about any type of electric guitar. Many blues players run Gibson Les Pauls with beefy humbuckers, while Iron Maiden completely broke the stereotype that you can't play metal with a Stratocaster.  Guitar effects pedals really changed the game too. However, some guitars do actually deal better with certain music genres.
Also, if your slide playing includes any fretting at all, FORGET IT. While it certainly raises them well away from the neck, the strings are lifted to a height that makes trying to fret them pull them off pitch well before you reach the fret... and there is NO adjusting it. I used one on a wide neck 12 string strung for six. A neck designed for the tension of 12 strings easily takes the tension of a heavy gauge set in a raised open tuning. The "Slide Guitar Extension Nut" is ideal for such an application (if you don't want to even try any fretting) but I doubt Stewey Mac's sells very many of them.
As an active musician in Los Angeles, I often hear guitarists marvel at how good the latest Squier by Fender guitars are for the price. The Squier by Fender HSS Bullet Strat is no exception. A few minor complaints aside, it’s simply a well-made version of a decades-proven design at a very affordable price. All of our panelists felt that it played well, sounded good, and in general felt like a more expensive guitar.

I've been coming in since they opened, and it's been crazy cool to watch this little corner shop grow into a major Seattle contender. That's really saying something, as there are some really incredible locally-owned guitar shops in the Greater Seattle Area. As has been mentioned, the service is the selling point. The entire staff are very, very cool people who are perfectly happy to talk shop without trying to push you on a sale. There's a lot of regulars, and combined with the student roster, it definitely has it's own little built in community. Their selection these days is insane, especially since they target a lot of awesome smaller brands that NOBODY else in the area carries. I'm pretty sure this is the only place in town you can go to play the Reverend line, not to mention damn near every PRS model currently in production. The locally-made boutique stuff they stock is awesome too, and I would have never even known about it had it not been for the shop. Kyle, the tech, is an expert. The other guys all do good work as well. This is my go-to shop for basically everything guitar-shop related. And I'm very picky.
Trim:  Heel cap: ebony. Fingerboard: ebony bound in white celluloid with scalloped lower end; 24 frets under A and D, 21 nickel-silver frets under G and C; single abalone dots behind 5th, 7th, 9th, 10th (slightly larger), and 15th frets; double mother-of-pearl dots behind 12th fret. Nut: bone. Bridge: mahogany capped with ebony; nickel-silver-plated steel screws to adjust bridge height and pickup contact. Tuners: six nickel-plated steel, worm-gear machine tuners by Grover with convex head surfaces and decoratively cut plate outline. Endpin: black bakelite; extends through tailpiece. Pick guard: imitation tortoise shell plastic raised on wood brace affixed to top with two steel dome-headed screws. Lacquer: dark orange-brown sunburst.
Hohner Musikinstrumente GmbH & Co. KG is a German manufacturer of musical instruments, founded in 1857 by Matthias Hohner (1833–1902). Hohner is identified especially with harmonicas and accordions. The Hohner company has invented and produced many different models of instrument, particularly the modern melodica, and most of the harmonicas used by professionals. The company also makes kazoos, recorder flutes, melodicas, banjos, guitars, bass guitars, accordions, and ukuleles (under the brand name Lanikai), along with its one million harmonicas a year.
i really liked it! especially since it goes over standard musical notation, which hasn't been considered a conerstone for electric guitar players, but i think, like the author says "it a skill you'll never regret learning". the reason it didn't get 5 stars is because the book states that it will start from zero as for standard musical notation, but it doesn't, it assumes a bit of knowledge and it advances at a perfect rate for some who has already a notion of standard musical notation, but not for someone who doesn't have a clue a buys this book to go from zero-to-master such ability.
Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.

As previously stated, a dominant seventh is a four-note chord combining a major chord and a minor seventh. For example, the C7 dominant seventh chord adds B♭ to the C-major chord (C,E,G). The naive chord (C,E,G,B♭) spans six frets from fret 3 to fret 8;[49] such seventh chords "contain some pretty serious stretches in the left hand".[46] An illustration shows a naive C7 chord, which would be extremely difficult to play,[49] besides the open-position C7 chord that is conventional in standard tuning.[49][50] The standard-tuning implementation of a C7 chord is a second-inversion C7 drop 2 chord, in which the second-highest note in a second inversion of the C7 chord is lowered by an octave.[49][51][52] Drop-two chords are used for sevenths chords besides the major-minor seventh with dominant function,[53] which are discussed in the section on intermediate chords, below. Drop-two chords are used particularly in jazz guitar.[54] Drop-two second-inversions are examples of openly voiced chords, which are typical of standard tuning and other popular guitar-tunings.[55]
The stringed, chord-playing rhythm can be heard in groups which included military band-style instruments such as brass, saxes, clarinets, and drums, such as early jazz groups. As the acoustic guitar became a more popular instrument in the early 20th century, guitar-makers began building louder guitars which would be useful in a wider range of settings.
I have a Hohner DC. It is either a MIC or MIK. It does not have body, or neck bindings, but in every other respect is very nice. It was one of the first guitars I got when I started paly about 5 years ago. As a matter of fact, I had not played it for over a year - I recently got it out of the case, re-strung it and played it regularly for a couple weeks. I have been going over my colection looking for things I could sell off, but I decided to keep this one.
I had this guitar handed down to me. It is in pretty rough shape. I think it is in good enough shape to restore to good condition/used shape. Before I attempt such a thing I would like to know more about the guitar itself. I know the history of Lyle and "Lawsuit" guitars so that part is done. The body has a cherry red finish with 2 "f" openings. The neck has had some stress on it, enough to have the wood lift a little on its grain pattern about 2 inches long from the nut to the fret board. I am not sure if injecting glue into this will keep the neck from breaking in the future. The fret board is loose at the nut but I believe I can glue it again. This is not the first restoration I have done. I have restored a flute and a grenadilla wood clarinet. Any comments regarding how to or if I am wasting my time will be welcome.
We’ve had a lot of fun looking at all of these great online guitar electric acoustics, and hope that among or top ten is your next instrument. There’s a lot to read through and consider, but we’ve been sure to make sure there’s something for everyone here, and all of the guitars come highly recommended. Read through the buyer’s guide if you’re new to electric acoustic guitars and aren’t 100% sure of what you’re comparing between electric and acoustic, and then make your purchase knowing you’ve made the right decision.
In terms of usage, it is quite similar to the mini Strat guitar we discussed earlier. It is a great choice for someone who just wants a cheap electric guitar for practice or someone who is an absolute beginner. Also, it is one of the best choices for five to fifteen years old kids wanting to learn guitar. It comes with small ¾ sized bodies and a 22.75inch of scale length. It has a c shaped fine maple neck with its 20fret fingerboard. 

The best way to use this type of book is to just take 15 minutes a day to work through a page or two at a time. You don’t have to find something that requires a lot of study or dedication on your part at this point. Your first priority should be finding a book that gets you thinking about theory as well as helping you develop coordination in both your fretting and strumming hand.
Finally introduced in 1936 was National Dobro’s first wooden Hawaiian Electric Guitar. These Hawaiian laps were built by National Dobro in Chicago. This had a squarish pear shape, rather wide and frumpy, with two sharp points for shoulders and fairly wide cutaways. This was “…solid wood finish, in hi-lited mahogany,” which is basically a shaded mahogany sunburst. The top was bound. A square neck rose up to a squared-off flat three-and-three head, now with plate tuners with plastic buttons. The 26-fret fingerboard (23″ scale) had dot inlays plus little numbers written along the treble edge for each fret position! This first wood-body looks to have some sort of elevated pickguard, also made of wood. The old, improved Stimson pickup was housed under a large, two-part rectangular cast bridge assembly with a slotted cover revealing the pickup poles, and a slightly elevated back section with rear slots for attaching the strings. Two little wings were appended to either side of this rectangular housing, the treble side with a volume knob, the bass side with a screw-on microphone-type plug attachment (this would be favored over 1/4″ plugs on Supro laps for years to come). A square metal Supro logo plate was mounted between the end of the fingerboard and the pickup cover. Again, cost was $75, including the amp.

Struggling to get your guitar sounding sweet and creamy? Don't fret! STUDIO GUITARS is here to warm up your sound with a selection of certified studio-fresh guitar loops recorded by Prime Loops' own professional master of the strings! Using some of the most classic equipment around, we've covered every curve of this awesome instrument's sound with an incredible collection of acoustic and electric guitar samples.
The bass guitar has a long neck (scale-length) and thick strings. The open strings of the bass guitar corresponds to the four lowest strings of the guitar and are pitched an octave lower. The standard bass has four strings though five and six string basses are available which extends the range of the instrument. Though the bass guitar is the bass instrument of the guitar family and the double-bass is the bass instrument of the orchestral string family their similar roles have drawn bass players to both instruments.

custom made guitars luthier services alvarez ampeg benedetto boss breedlove collings danelectro ,dean,digitech eastman electro-harmonix ,grinning elk, electro-harmonix epiphone fender- fender-custom-shop fender-usa fulltone g&l gibson godin gretsch guild hagstrom hal-leonard hamer harmony heritage hofner ibanez jackson kay line-6 marshall martin mxr national orange ovation paul-reed-smith peavey prs prs-paul-reed-smith rickenbacker roland silvertone suhr takamine taylor vox washburn yamaha 000-18 00-18 4001 asat-classic catalog champ classic custom-22 custom-24 d-18 d-28 d-35 deluxe es-125 es-175 es-335 flying-v j-45 j-50 jaguar jazz-bass jazzmaster l-00 lap-steel legacy les-paul- les-paul-classic les-paul-custom les-paul-deluxe les-paul-jr les-paul-junior les-paul-special les-paul-standard les-paul-studio lg-1 lg-2 melody-maker mustang precision- precision-bass sg sg-special sg-standard strat,bass guitar,speakers,parts,effects pedals stratocaster- telecaster telecaster-custom telecaster-deluxe telecaster-thinline..Greg's Guitars is the only author of "The Vintage Guitar News and Views.


I bought this guitar about 1 month ago. I am a small girl 5'2". I just strap this thing on and walk around the house playing. The pickup sounds freaking great hooked up to my Marshall amp. I have several other guitars including a Taylor 210ce which I also love. But this guitar is great for traveling, camp fires, and just plain old jammin. I chose this over the baby Taylor because the Martin had a full heel on the neck where's the taylor baby did not. It also sounded better when I play both the Taylor and the lx1e side by side. I thought that the Martin had a better "feel" to is as well when holding it. It is a travel guitar so it doesn't balance as well when you are standing with the guitar strap but I don't mind that at all. I love this little guy

Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-...  Click To Read More About This Product
You may be questioning why we’ve not covered bass pickups in this article. However, to keep things simple, we decided to stick solely to guitar pickups. If you are looking for a new tone or more power for your beloved bass, check out our dedicated articles on Jazz Bass pickups and Precision Bass pickups for all you need to know, as well as recommendations.
There’s 12 footswitches for you to control all your sounds and effects as well as a smooth expression pedal that can control swells, wah and even make parameter changes. A looper with 20 mins of record time is ideal for songwriters, buskers and those who need to be able to write music anywhere. It especially shines when coupled with the HeadRush FRFR-112 2000 Watt Powered Speaker.
A second common problem we encounter is a poor mechanical connection. When inserting a cord into a jack, the click you feel is the tip of the cord seating against the metal prong on the end of the jack. With use this prong may spread outward and loose a bit of it's tension. A gentle bend of the prong may be just enough to create a solid connection, however, metal fatigue can dictate the need to replace.

Other Archtone owners may notice a slightly different model number, but with the exception of a tenor version, the only difference is the finish. The H1213 (your model) was finished with a shaded-brown sunburst, the H1214 was ivory-colored with a flame effect, and the H1215 was a sunburst with a grained effect. In excellent condition, this model is worth between $200 and $250 today. But in the average condition yours appears to be, it’s worth between $100 and $150.
Clear and easy to follow instructions. I re-wired my Gibson Les Paul 60's Tribute for new pickups after removing the easy connects and circuit board that came stock. I ended up re-using the 3 way switch that came in the guitar instead of the one in the kit since it was shorter and the guitar didn't have room for the full length switch in the kit. They were both Switchcraft so same quality. I'm very happy with the results. After shopping prices, the kit is very reasonable versus buying the components separately.
{"id": "519377", "skuOrProductId": "519377", "categoryId":"site1AAG", "name":"Firebird Studio Electric Guitar", "pageUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/NonExistingImage-00-120x120.jpg", "addToCartUrl":"/guitars/epiphone-firebird-studio-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"All the classic Firebird Studio elements--mahogany body, set mahogany neck, Alnico Classic 'buckers, chrome hardware, and stopbar tailpiece with a limited edition finish.", "value":"167.58", "priceMin":"167.58", "priceMax":"399.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"70", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}
I have been playing guitar, banjo, bass and harmonica for 46 years - and I don't find a $4,300 Martin D 41 to be affordable (Guitar Center price). I play a Taylor 402ce and a dozen other instruments. I believe Taylor is the best instrument for the price..Alvarez Yairi guitars are very good too. Martin and Gibson make fine guitars but they are overpriced. I have a Chinese Maple Guild that sounds fine but the fretwork is amateurish. A Chinese Takamine New Yorker is very well constructed and sounds great.
Following the lead of Electro, which was having some success with their cast aluminum alloy bodies, Dobro – still a separate company – introduced its first cast aluminum Dobro Hawaiian electric lap steel guitar, probably in late 1934. Along with the aluminum lap, Dobro also debuted the Standard Guitar, and the Mandolin. Accompanying these was the Dobro Amplifier. All four listed for $67.50. These are all shown in the ’35 Tonk Brothers catalog.

Learning the notes on your guitar fretboard is one of the most important things you can do to advance your guitar playing skills. Knowing this information opens up an enormous amount of possibilities and can greatly help ease the learning curve for future guitar exercises. From scales, to soloing, to chord positions / progressions, knowing where each guitar note without having to think about it will put you well ahead of other guitarists who have not mastered this yet. This guide will give you some background information regarding how the notes on your guitar fretboard are laid out and of
However, you don͛t need to fork out over $10k for this version, as it comes with a respectable sub-$1,000 price tag. Sporting a familiar Strat style basswood body, this model is available in three iconic EVH-approved colors. Playability – as you͛d expect – is top-notch, with a reinforced quatersawn maple neck and a compound radius rosewood fretboard.
Jackson is yet another brand among the best electric guitar brands satisfying the needs of metal players. In fact, around three decades ago, back in the ’80s, Jackson guitars were the favorite ones for all metal and hard rock players in the world. Even today, the legacy continues as we see these guitars trending among the fans. Notably, the models like Kelly, King V, Soloist, Dinky, and Rhoads still rule the realm of guitars for their outstanding performance and tone.
Unbelievable value for money with quality that is second to none The Joey series of electric guitars have been specifically designed for smaller hands, with 3/4 sized bodies and smaller 21.5" fret scale. They are a great sounding, fun guitar and come complete with a built-in tuner to make sounding good even easier. Awesome value as a part of Ashton's

Some of the most impressive pieces of equipment come in small packages and in the shape of an item you would not expect to be as good as it is. The proof of this is the deceptively simple looking Mugig Portable Amplifier for Electric guitar, with 10W of power. This piece of equipment is on the big side of small, but is perfect in every single aspect of it, other than the size. The design is simple and understanded, the ease of transport is guaranteed, while the sound takes over the mind and heart of the musician and the crowd instantly. It is possibly the best electric guitar amp that I have gotten to mention on this list.


Well, we are not part of the study! The study has been conducted, and he’s just giving you the results, it was written nowhere that you had to guess which wood was which or anything of the sort. This doesn’t imply that his little kid (cause this is his son’s science project, remember) performed any form of double-blind test, but still your remark is completely inapplicable and actually turns back on you, that make a big fuss about this article’s sloppyiness, only to attack it with wrong logical reasoning.
Reverb pedals come with all kinds of different layouts. Even so, some of the controls are virtually universal. The first one we would like to mention is the dry/wet knob. This control is what you use to mix your original signal and the effect itself. When the knob is turned all the way to dry, there will be zero reverb present in the signal. As you move towards wet, the amount of reverb increases.
Most players dream of having comfortable, smooth action on a guitar. With the PLEK, the most optimal string action possible for any instrument can be realized. This gives the individual musician an instrument that plays exactly the way he has dreamed of. Optimal playability on a guitar makes it sounds better with notes that ring true and clean. There is no fret buzz under normal playing conditions and the intonation problems that occur because of high string action, are eliminated. You can hear and feel the difference.
One thing that is worth trying is combining different delays with different reverb effects. You can get some seriously beautiful sounds with a reverb and delay effect that sound good together. Some manufacturers have even gone so far as to create reverb and delay combo pedals. It is truly a perfect combination of effects, kind of like peanut butter and jelly.
The author is an excellent writer and explains everything slowly but doesn't treat you like an idiot. He starts from the very beginning with teaching string names, notation etc but you can start anywhere in the book according to your knowledge and experience. Each exercise/song teaches a new concept and there is a very good sound quality CD that is enjoyable to play along with and hear what the proper timing should be.
I have a Dover, it was my great uncle’s guitar. It has seen better days but considering its age its in pretty good shape. Some one did some custom wiring inside so I had to replace the pots. One of the pickups was glued back together but it wasn’t done properly so now it doesn’t quite sit right. The plastic cracked at most of the corners where the screws hold the pick ups down.
Someone recently posted one of my pedal demos in a thread on a guitar forum and stated that he really liked the sound of the pedal in the demo. Another forum member chimed in and said that for some reason, everything I play through usually sounds good. Shortly after, forum member “Squank” replied, “It’s a talent. Most gear can be dialed in to sound at least decent.”

Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce and Cedar as the key to getting the desired tone from a guitar. Indeed, many beginning builders agonize over wood choice combinations as they relate to tone, with more experienced craftspeople offering suggestions that seem to assure the correct … [Read More...]

Measure the height of the strings at the twelfth fret. For most playing styles, the height between the bottom of the low "E" string and the top of the twelfth fret should be a hair over 2/32". The High "E" string should be set at 2/32". The other strings should gradually flow between these measurements. This is where I would start, but the player's style (particularly their right-hand attack), as well as string gauge, scale length and individual neck nuances may necessitate deviation from these numbers.


When looking to buy a guitar, you want to make sure that you’re picking a model that is right for your skill level, playing style, and needs, all that while ensuring that you don’t overspend. If you’re just starting out, there’s probably no need to spend a couple grand on a flashy model when one of the quality cheap acoustic electric guitars will do.
Perhaps the most dramatic of ambient mic techniques, though, comes courtesy of Chris Tsangarides. His 'Vortex' involves using studio screens to build 30-foot-long walls along each side of the guitar cabinet, creating a flare shape (apparently inspired by the shape of a bass bin). Within this flare, he places a close condenser mic and typically another couple of condenser mics with different distant positionings, perhaps at 15 and 30 feet away. "I walk around while the guy's playing and find a sweet spot and put the mic there", says Chris.
There are many different kinds of pickup selectors. The most common forms of pickup selectors are 3-way and 5-way switches. Obviously, a 5-way switch gives you more pickup combinations than a 3-way switch. Below are some diagrams of what 3-way and 5-way pickup selectors can do. In choosing a pickup selector, I suggest that you try to replace your pickup selector with the same kind of selector. Refer to the manufacturers website and wiring diagram to get the right specifications. Notice I said to get the same “kind” — not the same one. It would make no sense to replace a cheap selector with another cheap selector. Find out the specs on the old selector and buy a nice one.
Are you in earnest need of a guitar and do you want to buy that right now. Well, if the answer to this question is yes, then you will have to stop and think for a while before you actually make the investment. This is because of the fact that buying a guitar is an expensive investment, so you must to be quick to arrive at a decision. Now you should be asking yourself some pretty interesting questions before you buy a guitar so that you do not have to regret later on in any way.
Now, let’s consider the tone knobs. Eric Clapton was one of the first guitarists to realize the power within those unassuming plastic spinners. His famed “woman tone” sound during Cream relied on rolling the pots on his Gibson Les Paul Standard, SG or ES-335 all the way off and turning the treble and midrange of his superbly overdriven Marshall amps high. Similarly, jazz guitar players who are looking for a classic tone roll their pots back until they get in the Wes-Benson-Burrell-Pass-etc. zone.
The AS is a semi-acoustic guitar built to tackle just about any genre of music you throw at it. The pickups are mounted into a sustain block for increased sustain and feedback elimination. The 17th fret joint features comfortable access to higher notes. Super 58 Custom Pickups The Super 58 Custom pickups deliver the smooth, nuanced tones and the biting growl of blues. Ebony Fret board w/ Art star Fret Edge Treatment The Ebony fret board with Art star fret edge treatment provides tight response and smooth left-hand fingering. Bone Nut The Bone nut provides richer tone from low to high. Specifications: neck type: Art star 3pc Mahogany/Maple set-in neck body: Flamed Maple top/back/sides fret board: Bound Ebony fret board w/Pearl & Abalone block inlay frets: Medium frets w/Art star fret edge treatment bridge: ART-1 bridge tailpiece: Quick Change III tailpiece neck pu: Super 58 custom (H) neck pu bridge pu: Super 58 custom (H) bridge pu Neck Dimensions: Scale: 628mm/24.7" a: Width at Nut - 43mm b: Width at Last Fret - 57mm c: Thickness at 1st - 20mm d: Thickness at 12th - 22mm Radius 305mmR Body Dimensions: a: Length - 19 1/4" b: Width - 15 3/4" c: Depth - 2 5/8".
Repair body wings. These wings form the main body shape and may have been broken by dropping the guitar or other damaging methods. If you do not properly glue in the wings you will need to use extra caution as to not break the bond. Repairing wings or any body wood is rarely necessary, especially on a thick guitar body such as a Les Paul Standard. It may be needed on a smaller bodied guitar much like a Les Paul Junior.
They say the formula for how many guitars to own is n + 1, where n equals the current number of guitars you already own. Now that we know that you’ll be buying another guitar, I’ve put together a list of the top 15 acoustic guitars for under $500. A top 10 list just wasn’t going to cut it here, as there are so many great choices under $500. If $500 is too much to spend, check out my guide on the best beginner guitars that come in under $300.
Harmony almost wrote the book on guitars and responsible for so many rock stars. Youngsters all over the world ordered guitars from Sears, Montgomery Ward, and later by JC Penny. These affordable guitars are now very sort after and have become very expensive. Many of these models have been copied and reissued over the years. In their heyday, Harmony was the largest manufacture of guitars in the USA. In 1964-65 they sold over 350,000 instruments. The pickup used during and around those years were made by DeArmond Company. Today Vintage DeArmond Pups are still valued and sold. Look into years of bands, and you will find VIP's of the Rock World, with a Harmony in their hands.
Bridge pins prior to 1945 did not have string slots. There is a slight seam seen in the round head (hard to see but it's there). The bridge pin round head diameter from 1931 until mid-1939 was about 0.320". In mid-1939 the round head was reduced to about 0.300", and this size was used until the unslotted pins ended in 1945. The shaft size was slightly increased at this time too. The pre-1939 style pins have a more bulbous head, where the 1939-1945 style's head is more slender. The pin taper is about 5 degrees, and the diameter under the collar is about 0.225". The pins are made of hard celluloid. Several companies have reissued these old style pins.

The Best TV Shows to Rewatch The Best Automotive Exterior Accessory Brands The Best Electric Guitar Brands for Beginners The Best TBS Original Shows The Dumbest Reality Shows of All Time 10 Celebrities Who Have Been Stabbed The Best Anime Streaming on Netflix The Best Biopics About Real Comedians The Most Hated Game of Thrones Characters The Best Organic Coffee Brands The Best TV Spinoffs A Random Collection of 30 Hilarious YouTube Comments 37 Secrets That Your Gym May Be Hiding from You The Best TV Shows Streaming On Hulu The Best CBS Shows of All Time The Best Drum Brands for Beginners Times Companies Royally Screwed Themselves With Marketing Promotions The Most Embarrassing Celebrity Yearbook Photos The Best Acoustic Guitar Brands The Best Electric Guitar Brands The Best Toothpaste Brands The Best Christmas Songs Written by Jewish Songwriters The Best Probiotics Brands The Best Washing Machine Brands

“I started to get really frustrated, and I said, ‘I know! I’ll fix you!’ I got a single-sided Gillette razorblade and cut round the cone like this [demonstrates slitting from the center to the edge of the cone], so it was all shredded but still on there. I played and I thought it was amazing, really freaky. I felt like an inventor! We just close-miked that in the studio, and also fed the same speaker output into the AC30, which was kind of noisy but sounded good.”
One of the best known Kay electric guitars during the 1950s was the K-161 "Thin Twin", most visibly used by blues artist Jimmy Reed. This instrument debuted in 1952, and featured a single cutaway body, a distinctive "fire stripe" tortoiseshell pickguard, and a pair of thin blade-style pickups that gave the guitar its name.[citation needed] Kay used this type of pickups on various Kay electrics dating back to the 1940s.
With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.

Edit: After reading everyone's comments I've decided to let the technician give my strat a first time setup and I'll try to absorb any information I can in order to be able to do it myself one day. I realize many of you have some pretty cool guitar shops that'll do a free setup so I'll try to negotiate something. I'll be sure to record the condition of the guitar itself before the setup in case the technician chips it or scratches it. I'll also check out Dan Erlewine's books like the guitarist below suggested. Thank you all for your advice, I really do appreciate it and I hope to be as wise as you all are when it comes to guitars someday.


Guitar FX BOX is acting just like a good collection of analog effect pedals. Just plug your guitar into the sound card input and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice, and other inputs real-time - I/O delay is really low, almost undetectable. This is achieved using DirectSound, WDM streaming or ASIO for fast access to the sound card hardware and special DSP algorithms optimized for real-time processing. Besides high sound quality, Guitar FX BOX features intuitive user interface, supports presets and hot keys for quick presets changing, MIDI/Game controllers pedals, configurable tuner, metronome, file input/output. Currently included effects: Overdrive/distortion, Amp&Speaker cabinet simulator, Echo, Pitch shifter, Reverb, Wah-Wah, Chorus, Tremolo, I/O Equalizers, Dynamic compressor, Phaser and Volume swell.

Multi-effects processors come in various configurations, too. Some are floor units that have built-in foot pedals and controllers so they can be operated while your hands remain on your guitar. There are rackmount processors (these can be fitted into a rack of recording gear in line with your signal chain) that incorporate a preamp for your guitar. The more sophisticated models have MIDI I/O for connecting guitar synthesizers to keyboards, modules, computers and other MIDI devices and include a divided pickup to attach to your standard guitar. These processors pack effects libraries that offer combinations of effects, amp models and stompboxes that can number in the thousands. Switching can be controlled by onboard knobs, foot controllers or guitar-picking technique. Expect to pay considerably more for a rackmount effects processor, in a range of three- to four-digit prices. 
* The guitar comes with very light bendy strings. This is probably due to market data that tells Epiphone that the bulk of buyers for this guitar are teen Guitar Heros who think that string bending every note is an essential aspect of shredding and wailing. If you plan to put heavier strings on the guitar (like 12-51s for example) for jazz or other styles of music then you will probably need a truss rod adjustment to compensate for the added tension. If you don't know how to do this, ask someone who does. You can ruin a guitar, permanently, by being too aggressive with a truss rod adjustment.

A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.
Hey dan, others: My first guitar was a Palmer, my parents purchased it for me from our small town's jewelry store. That was like 1968. The guitar was an electric with two pick-ups and "wabble-stick" (tremelo). It was a beautiful natural wood tone sunburst. Jewelry stores have not been known to carry the best in guitars; but I had a lot of fun learning to play that thing. I still have it; can't bring myself to part with it, though I now have three acoustics (Yamaha, Alvarez (12 string), and a Fender (DGS21, a Peavey bass and Lyon series Washburn. I'd say, for your money, your better off with a washbun. The neck action on them is very impressive. My Palmer is now in disrepair. I need to resolder the pick-ups. The key-board was quite nice; some bridge problems, however, a bit of a rattle. Maybe the nut needs to be reset. I don't know where to find them now, but I understand that they're still out there somewhere.
The 1960s were the Golden Age for guitars in America. The folk music boom was followed closely by the British Invasion and the demand for guitars skyrocketed as young people by the millions started making their own music. The Silvertone Amp-In-Case model 1457 was the entry point for thousands of them. Some of the most sought-after Silvertones are from this era … more
• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Bubinga - Neck Construction: 3 Piece - Nut Width: 48mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 7 In-Line - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG 707 - String Instrument Finish: Black
Cool guitar! And you’re right— most Harmony guitars aren’t worth much, or in other words, they aren’t very collectible. That said, I wonder how many guitarists reading this column started out learning to play on a Harmony. There are hundreds of thousands of Harmony guitars out there, and though these are mostly entry-level instruments, they’re very much a part of guitar history.
That’s why it’s incredibly important that once you work through your first method book you should start seriously considering finding a teacher to further your education. A teacher can help give you the tools that you’ll need to continually advance on your instrument, which in turn will ensure that it will be a lifelong source of entertainment and enrichment.
One and one half steps down from Drop D. This tuning is most often used by modern rock and heavy metal bands. Utilized by bands like A Day to Remember, Slayer (on "Cast Down", "Seven Faces" and "Payback" from God Hates Us All, as well as few songs on Christ Illusion, World Painted Blood and Repentless), Slipknot, Intronaut, Down, Machine Head (tuned 40 cents sharp), Demon Hunter, Chevelle, Origin, Asking Alexandria on their third and fourth albums, From Death To Destiny and The Black respectively, RED (on "Faceless"), Parkway Drive, Skillet (on much of Comatose), Veil of Maya, Bring Me the Horizon (up until Count Your Blessings), Sevendust, Soilwork, Chimaira (on a few songs from The Infection), Eye Empire, Crown the Empire, The Devil Wears Prada, Drowning Pool, The Veer Union, Comfort in the End, Attack Attack!, Mark Tremonti (on much of Full Circle and All I Was, and the songs "Coming Home" and "Home" from Blackbird and AB III, respectively), Nickelback on the song "Side of a Bullet", Disturbed on Immortalized and occasionally Black Stone Cherry, Limp Bizkit, The Kills, and Sucioperro.
Higher strings can potentially induce some drawbacks that you will need to minimize. Before settling on your new action, you want to determine that strings don’t go out of tune in any fretting positions up and down the neck. You also need to ensure that using a capo, if you ever play with one, doesn’t throw all strings out of pitch too badly. Also note that if this experimentation results in raising your strings considerably from their previous position — and your guitar remains playable after doing so — you might also need to adjust your pickup height slightly. But, note that lowering the pickups further from the strings can often also help the strings to vibrate more freely (as discussed way back in Gibson Tone Tips #1), so leaving the pickups lower might be adding a double bonus to your new playing set up. Play with the options and see what works for you, and that will yield the “best right answer” for each individual player — and once you have achieved it for you, be sure to check and change your intonation, as necessary. If low action floats your boat, great, but it’s worth knowing that there’s a wealth of tone hiding in that thin slice of air between string and fingerboard.
Gretsch re-emerges with this awesome rex acoustic-like electric guitar that defines quality and perfection in terms of style and elegance. Te Jim Dandy Flat Top G9500 is one of the Gretsch best electric guitars which effectively brings back the quality and sound that characterize one of their most famous guitars throughout the 30’s, 40’s and the 50’s era.
The wah-wah pedal is one of the most identifiable of all guitar effects, yet is one of the most simple as well.  An easy way to think of it is that you have a tone knob under your foot.  It is literally just that.  A rocker foot pedal allows you to accentuate high frequencies when your toes are down.  When you put your heel down, you accentuate the bass frequencies.
The original Overdrive pedals were created to mimic the sound of tube amps being cranked to 10. This will cause the tubes to be pushed to their limits, producing a crunchy and aggressive tone. The sound of overdriven tubes are certainly iconic as it gave birth to the sound of Rock ‘n’ Roll. However, the problem with bringing your volume up to 10 to overdrive your tubes is that it gets really, really loud--safety hazard loud.
It can be tough to know where to start when you’re looking at as many options as there are in the world of effects pedals. In fact, your first pedal may not even be a pedal at all – many amplifiers have built-in effects sections so you can get your introduction without having to attach an external stompbox. But if you have a more straightforward amp, or if you’re ready to try effects units that go beyond its built-in capabilities, there are some great varieties for novice users. And don’t forget that you can always look up the preferred pedals of your favorite guitar hero to inspire your own collection.

Much like the FG series model we have talked about above, this guitar is made solid and has passed Yamaha's unforgiving quality control. You know precisely what you're getting and how it'll perform because each guitar in this line-up is exactly the same as the next, with no discernible variation. They went with a nice solid Sitka spruce top in combination with a rosewood back and sides. This should tell you right away that the guitar is going to be very responsive aurally.

Wildwood Guitars is proud to be recognized as one of nine authorized online Gibson dealers. We invite you to browse our extensive inventory and discover the magic of one of the greatest American brands of all time. Located in the heart of Tennessee, the Gibson Memphis factory is known for crafting the majority of Gibson’s incredible semi-hollow and hollowbody instruments. These guitars are overflowing with the soul of the city they’re born in, and they represent the ultimate in both vibe and versatility.
Leo Fender started Fender Guitars in 1946, and his first innovation was the production of solid body guitars. Up until then, electric guitars were made with hollow bodies, meaning that they were somewhat fragile and somewhat complicated in design. Leo Fender’s guitars offered a more straightforward design; the were bodies made from one solid block of wood and the bridges were simply attached to the body, removing the need for extra calibration of elevated bridges.
All I can say is 5+ STARS, holy smokes and WOW!!!! ALL that for $140 SHIPPED!!!! AMAZING DEAL!!! The guitar plays GREAT! The color is very beautiful! The sound is quite impressive for the little money spent!!! The little AMP is adorable and works perfectly. All the accessories are great and are the perfect 'icing on the cake'!!! You will need a better gig bag than the one the guitar is shipped with, the gig bag that comes with it is thin and good to keep the dust off but not much more. So, buy a nice gig bag that will fit and your guitarist will be travel ready! I highly recommend this guitar ensemble to everyone! For $140 SHIPPED, you truly won't be disappointed!
Good Deals - BlackHatHunter, vexed73, Shamdog, sa1126, Doctor Morbius, Tweedledee, RitalinCupcake, CompleteGuitard, Metal0822, lfrz93, deadanddreaming, Billy Dee, jigowatt, jcameronk2, Steve_man, orangesix, Zuzuman, BryanFTL, finboy, IBDBB (x2), Mike Fiasco, Posh1227, Woody_in_MN, finboy, FarToMany, kojdogg, Fusion1, dcindc, fulcrumpoint, live-I-evil, Deadbeat Son, Teletaylor, Mr Goodbomb, Firebrand, Jse, bdhn, Lonnie99(x2), jjegg
About the only thing that all these producers have tended to agree on across the board is that you should try to get your guitar sound as good as you can before you even think about recording. "The stupidest thing that any musician can do," remarks Tony Platt, "is to just plug in and play and say 'make that sound good'. It doesn't work like that. I will always say to the guitar player, for instance, 'Is that sound coming out of your amplifier the sound you want to hear? If it isn't, show me what it is and we'll try to get somewhere close to that before we even put a microphone on.' It's a waste of everybody's time to sit there tweaking stuff until somebody says 'Oh that's good.'"
In preparation for making these electric guitar pickups, I carefully studied the qualities of both vintage and modern guitar tone. All of my pickups feature grounded shielding to reduce noise from external electric fields and are potted under vacuum to eliminate microphonic feedback. The result of years of building and testing is a family of pickups for guitar, bass, lap steel and other instruments that will help you achieve the tone you desire. All V V G pickups are hand-made in the USA. Several of the new designs offer the user the capability to shape the tone by changing the magnet assembly and reversing the effective winding direction. We're here to help you find your tone!

Flamenco technique, in the performance of the rasgueado also uses the upstroke of the four fingers and the downstroke of the thumb: the string is hit not only with the inner, fleshy side of the fingertip but also with the outer, fingernail side. This was also used in a technique of the vihuela called dedillo[40] which has recently begun to be introduced on the classical guitar.
After your design has been properly plotted out on the poster board you can cut it out with an exacto knife. Make sure you stay as true to your lines as possible so you have a nice clean line to trace once your ready to. Then lay out the template on body blank and trace away. I like to cut the piece of poster board the same size as the body blank I am using. It makes it a lot easier to line everything up that way. Now you're ready to move on to the next step.
Don't just slap an effect on a track: why not try using automation to apply effects (in this case delay) on single words or phrases to make them stand out? Modern audio sequencers make it very easy to play around with spot effects — that is, effects which are applied to single notes or phrases within a track, rather than to a pattern or track as a whole. Try using different reverb styles on the snare within drum patterns: a short decay on the '2' and a long decay on the '4' for example. Another idea is to apply spot chorus to individual words within a vocal line, as a way of adding emphasis to the lyrics. The 'freeze' or audio bounce-down function of a typical sequencer allows you to get around any problems your computer might have in running lots of instances of a particular effect. Stephen Bennett
Some guitars have a fixed bridge (3.4). Others have a spring-loaded hinged bridge called a vibrato bar, tremolo bar, or whammy bar, which lets players bend notes or chords up or down in pitch or perform a vibrato embellishment. A plastic pickguard on some guitars protects the body from scratches or covers the control cavity, which holds most of the wiring. The degree to which the choice of woods and other materials in the solid-guitar body (3) affects the sonic character of the amplified signal is disputed. Many believe it is highly significant, while others think the difference between woods is subtle. In acoustic and archtop guitars, wood choices more clearly affect tone.
×