National Dobro’s involvement with electrics began, indirectly, with experiments conducted by George Beauchamp, who designed his first “electro” guitar in 1931, while actually still with the National company (not yet merged with Dobro). This was a wood-bodied “frying pan” with a pickup probably designed in conjunction with Paul Barth and Harry Watson, another National employee.

There were also four full-sized archtops; the Model EP-14, Model EP-15, Model EP-17 and Model EP-18. These were basically all variations on the same guitar, with glued-in necks, non-dipped heads, mini-strip plastic inlays, single rounded cutaway, f-holes, adjustable bridge, trapeze tail and translucent pickguard. Rocker switches were mounted on a small plate on the upper shoulder, while the volume, tone and jack were on a small plate on the lower treble bout. The EP-14 (shaded mahogany) and EP-15 (natural) had two pickups. The EP-17 (shaded mahogany) and EP-18 (natural) had three pickups, some two-tone, some flat rectangular metal-covered.

It features a solid mahogany top, supported by laminate mahogany back and sides, which gives a warmer tonality and a very earthy vibe. It also comes with Graphtech NuBone nut and saddle, a premium feature that you normally have to pay extra to add into your guitar. Giving this guitar its amplified voice is a Fishman Presys II 301T electronic pickup/preamp system that comes with a built-in tuner. On top of all that, the Washburn WL012SE does not skimp on ornamentation, which includes the Washburn Parquet rosette and rosewood bindings.
Tremolo is a regular and repetitive variation in gain for the duration of a single note, which works like an auto-volume knob; this results in a swelling or fluttering sound. This effect is very popular in psychedelic and trip-hop music. The speed and depth of the flutter are usually user-controlled.This is a volume-related effects pedal. This effect is based on one of the earliest effects that were built into guitar amplifiers. Examples include:
Wah-Wah: For swishy, rounded sounds that sort of sound like the guitar is wailing, a wah-wah pedal employs a sweeping filter controlled by a spring-loaded treadle, creating quirky frequency boosts as you work the pedal up and down. A famous version of this pedal is marketed by one manufacturer as the “Crybaby,” in an attempt to describe its tone in one word. The late Jimi Hendrix used one of these pedals to great advantage.
The Lotus Vantage copy (Washburn Eagle, Aria Pro II Cardinal series, or Ibanez Artist) double cutaway (batwing) guitar with a solid body, 3 per side tuners on headstock, rosewood fingerboard with brass inlays, brass nut and neck-through construction (though there may have been a bolt-on model). This was usually finished in emerald green, polished mahogany or stained blue/white breadboard style and occasionally gloss white with 2 exposed humbucker pickups.
My first guitar was an acoustic guitar made by Ibanez. At the time I got it, I was very into the acoustic-oriented bands that were dominating adult rock radio at the time, the mid-90s. You know, bands like Hootie & The Blowfish, Blues Traveler, the Goo Goo Dolls and Barenaked Ladies, for example. So this was perfect for me. I could imitate some of my current favorite acoustic guitarists and learn to play the basic chord structures of their songs. But the itch to do more grew, and I was ready to branch out into the foreign, exotic, sexy world of electric guitars. I bought one of those starter pack guitars that come with an amp, some power cords, a strap, picks, a guitar case, some kind of instructional materials, and everything you needed to transform yourself into Jimi Hendrix in a matter of days or even moments. I was all set.

This effect gives a guitar that ska/reggae sound. It works by varying the cutoff frequency of a low-pass or bandpass filter (the same filter that's in a Wah-Wah effect, hence the Envelope Filter is also called an Auto-Wah) using an envelope follower which watches the signal for amplitude changes. So it wahs your attack, and then gives less and less wah as the signal attenuates. So the sound has a crunchier attack and the tone is very sensitive to varying dynamics.
Strumming Patterns: Tremolo is a tough fit here for the same reason as delay. Timing and repeating issues both tend to cause problems.Chords: This can work if used sparingly, especially when strumming patterns are simple and chords are allowed to ring.Short Arpeggios: Particularly if played during a verse, short arpeggios are easily benefited and improved by a light tremolo effect.Quick Solos: Any unique, lead guitar part that needs something extra can be a good spot for the tremolo effect. Usually this will occur during the bridge of a song.
While Gretsch is known for semi-hollow and full hollow body guitars, and it is only fitting that one of their semi-hollow chambered body models make this list, specifically the Gretsch Electromatic Pro Jet Bigsby. Being part of their Electromatic line, brings with it all the Gretsch goodness minus the premium appointments, at a very accessible price point. It is a true archtop thinline guitar, that passed the same attention to quality and detail that more expensive Gretsch guitars also go through.
Founded by a father and son, Ryohei Tahara and the unknown Tahara. I do not know which was the father and which was the son. The company existed until the late 1979 when it was bought up by Saga Musical Instruments. In all, the company existed less than a decade as Tahara. Both the Maya and El Maya badges are attributed to Tahara. Saga Musical Instruments exists to this day.
Epiphone Les Paul Custom Pro Electric Guitar Look at this snazzy thing. The Epiphone Les Paul Custom PRO is one electric guitar you’d be proud to tote on stage with its sleek looks. Taking from the original Les Paul Custom - AKA the “Tuxedo” Les Paul - the Epiphone Les Paul Custom PRO is now packed with modern upgrades including a more slender neck and a modified stopbar design.
Sweet and tasty Smooth Jazz track. Featured electric and acoustic pianos, electric organ with synth. Rhythm electric guitar playing chords and another creamy electric guitar playing solo. Also, this track has warm and wide bass guitar with drums and percussion. This track is great for presentations, advertising, real estate background, Youtube and other videos.

Maple is a very hard type of wood with good tonal qualities and good sustain. Guitar necks are traditionally made from maple, in part because of its strength, and in part because the material can highlight and amplify the wood in the body. Maple is also often used as a top for the guitar body, partly because it is beautiful (think flame, or quilted maple tops), and partly because it can brighten a sound that would otherwise be murky.

It wasn't long before Southland went to hell in a hand basket. I would like to acknowledge the professionalism of people like the late Lee Ingber who was quality minded enough to know that junk will ruin any business. It's too bad that the last owners of Southland never learned that, even as their company faded into the sunset of the graveyard of greed.

{ "thumbImageID": "FA-135CE-Acoustic-Electric-Guitar-Natural/K37012000002000", "defaultDisplayName": "Fender FA-135CE Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51500000139262", "price": "179.99", "regularPrice": "179.99", "msrpPrice": "180.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Acoustic-Electric-Guitar-Natural-1500000139262.gc", "skuImageId": "FA-135CE-Acoustic-Electric-Guitar-Natural/K37012000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000139263", "price": "179.99", "regularPrice": "179.99", "msrpPrice": "180.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Acoustic-Electric-Guitar-3-Color-Sunburst-1500000139263.gc", "skuImageId": "FA-135CE-Acoustic-Electric-Guitar-3-Color-Sunburst/K37012000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000139260", "price": "179.99", "regularPrice": "179.99", "msrpPrice": "180.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Acoustic-Electric-Guitar-Black-1500000139260.gc", "skuImageId": "FA-135CE-Acoustic-Electric-Guitar-Black/K37012000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Clock maker Matthias Hohner began crafting harmonicas in 1857, assisted by his wife and a single employee. 650 were made in the first year.[1] Hohner harmonicas quickly became popular, and in his lifetime Matthias built the largest harmonica factory in the world.[2] During the American Civil War, Matthias Hohner distributed harmonicas to family members in the United States who in turn gave them to the soldiers.[3]

An American company that makes some amazing acoustic and electric guitars, Taylor guitars are considered as one of the best in the world. Like Martin, they can be expensive, but surely worth every penny. Taylor and Martin have the upper hand when it comes to acoustic guitar brands in America. One of the popular series is the 200 series and is of great value. For beginners, Baby and Big Baby, and the GS Mini are perfect choices as they are small-bodied.
{ "name": "Ruby Red", "skuUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar/l21430000002000", "status": "backorderable", "statusText": "Back Order", "pimStatus": "R1", "inventoryText": "Reserve now - Ships 11-28-2018", "inventoryKey": "available_date", "availableDate": "11-28-2018", "price": 999.99, "formatedIntegerValue": "999", "decimalValue": "99", "isOnSale": false, "msrp": 1430.00, "salePrice": 999.99, "listPrice": 999.99, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuL21430000002000", "displaySku": "L21430 000002000", "serialized": false, "stickerDisplayText":"Backstage Pass Members Earn 12% Back In Rewards On This Item", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/L21430000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"12-08-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Fullerton Standard Legacy Electric Guitar Ruby Red", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"12,000", "pdpLoyaltyPointsMultiplier":"1.5", "checksum":"581797334923", "restrictionType":"", "restrictionError":"" }
To make frequency selective networks, we must use capacitors and/or inductors. Unlike resistors, both caps and inductors discriminate against some frequencies in favor of others. Capacitors preferentially pass higher frequencies; inductors pass lower frequencies more easily. Resistors help us set how much gets through, while caps and inductors select which frequencies get through. Inductors are big, heavy and expensive, so almost all tone controls use only caps and resistors.
I can give my own story as why I decided to go direct at shows when the band I am in uses our own PA. In a 5 piece band, with dense guitar, a busy keyboardist/organist, a 5 string bass, 3 vocalists and a cymbal-happy drummer, things were getting loud onstage. Our singer would have the monitors close to feedback all night (and it would feedback several times in the night). Live recordings, both in the room, or miked on TV or radio were a mess of frequencies, since setup times were quick, and we hoped for the best. My amp, a Mesa/Boogie with 6v6s & EL84s sounded amazing. But everyone said they couldn’t hear the vocals. When we listened back, we heard what everyone else (didn’t hear). We were a sonic mess. We tried clearing it up with EQs and amp placement. It sounded clearer onstage, but microphone leakage and feedback were still a problem, and the band had internal ‘volume wars’ with each other. Truth is, we didn’t always have a great soundperson. We were carrying a lot of gear. The venues we played and the sizes of the stages and audiences varied wildly. After several poor sounding gigs that left my ears ringing (even with earplugs), I started investigating. The first decision was to go with IEMs. This would eliminate the bulky monitors (with 1 poorly placed handle, mind you) and stop the feedback problems. It would free up stage space. The next problem was realizing that the amps onstage easily could overpower the IEMs that were directed right in our ears. So I came to the conclusion that the only way past this problem was to get rid of all of the amps. 

There are different ways to play electric guitar. One is to just play the electric guitar, and to take it as it is. Another way is to play the guitar as a sort of synthesizer. With the right effects (delay, reverb, volume swells, added octaves), no one would even know that it was a guitar. Neither way is wrong, but we refer to both as "playing electric guitar" even though they're being used in completely different ways that may as well be different instruments. Drama ensues.

Lunes-Domingo de 9AM a 7PM EST Customize Search Results for Your Location change location SitemapView Our SitemapContact UsBlogBy EmailPlace a Purchase OrderReturn RequestLet Us Help YouFAQsProduct ConditionShipping InformationPayment OptionsOrder VerificationReturnsNotice of AccessibilityAffiliate ProgramJoin Our Affiliate Program Follow zZounds on:

So, what string gauge is standard for electric guitars? Most new guitars come strung with super-light or light-gauge strings. For beginning guitarists, that’s probably a good place to start. As you develop fretting and picking skills and your fingers gain calluses and strength, you may want to gradually move up to heavier strings, depending on the music you play and the tone you seek. Many guitar manufacturers make specific recommendations about what strings to use. Some produce their own strings or have them custom-manufactured to their specifications.
Here's my attempt to catalog those songs. Note that these are not necessarily my personal favorites by each artist, although I think all of them are at least pretty good. I tried to stick to at least "acoustic-friendly" songs. They range from incredibly simple to fairly complicated, but nothing is near-impossible. I omitted several popular piano tunes that would be easy to learn on guitar. Also note that many if not most of these are intended to be sung simultaneously for full effect. And finally, yes, the songs are in alphabetical order because I thought of most by scrolling down my iTunes list
Ibanez offers a wide variety of electric guitars, bass guitars, and acoustic guitars. They’re not the best at producing super high-end guitars for pros and enthusiasts, but they are excellent guitars for any beginner. The price you typically pay for an ibanez is usually between $200 and $500. If you’re set on Ibanez, they do offer higher end models that can cost over $2,500. Despite their reasonable prices, the quality of Ibanez guitars is decent. Ibanez tends to have good performance at economical prices. Not every aspect of their guitars are perfect as they are a cheaper brand, but they do tend to put a little more effort into areas that matter. For example, the necks of their guitars are typically mahogany or basswood. These materials are known as the high-end materials that the top guitar models would use.

The guitar features hand-rubbed solid Sitka Spruce top supported by Martin's incredibly reliable mahogany HPL (high pressure laminate) back and sides, essentially similar to the configuration found on many of Martin's mid-priced acoustics. If you're looking for an affordable starting instrument that has big-brand backing, or you are looking to get into the parlor-style guitar trend, check out the LX1E Little Martin.

The first subject I concentrated on is (you guessed it) recording electric guitars. What became immediately apparent was that there was a huge range of different techniques being used, and also that there were strong differences of opinion between different professionals, which left the question 'who do I believe?' The only way I could answer that question was to put the different techniques into practice in the studio, and then A/B them to sort the sheep from the goats.

My favorite guitar effect is Tremolo with a touch of echo. This works well on songs with slower melodic guitar leads and slower rhythms. Tremolo is an effect that has a speed adjustment and amplitude adjustment. The speed needs to be adjusted to the song tempo. This was popular for many songs written in the 1950’s. If you are a guitar shredder you will not be happy with this effect. I have a Boss Guitar Pedal and Line 6 Pod XT and use this effect from the pedal. I am not crazy about software generated effects as there is not enough space on stage for all the equipment and adding a MacBook and keeping it from getting knocked around would be too difficult. After recording I have used Garage Band and this software is easy to use. I probably have four or five software packages and they are too overwhelming at times. I have given up trying to figure out how to use the software with my expensive Presonus 24 track digital AI Board. It is almost impossible to use these recording software packages without having expensive school training.
Although there’s no clear delineation for when Phase Two officially began, the Hi-Flier began to develop new features. While it maintained the P90-style pickups, other aspects of the guitar were changed. The fret markers shrunk and were made uniform in size, the rocker switches were replaced by three-way toggles and a plain white pickguard was made standard.
Power attenuation[when defined as?] can be used with either low-power or high-power amplifiers, resulting in variable-power amplifiers. A high-power amplifier with power attenuation can produce power-tube distortion through a range of listening volumes, but with a decrease in high power distortion. Other technologies, such as dual rectifiers and the sag circuit[jargon]—which should not be confused with attenuation—allow high power amplifiers to produce low power volume while preserving high power distortion.[27]
Let’s start off with a guitar’s signal. As the driving force behind the entire effects chain, a guitar’s signal (more importantly, it’s voltage) must travel through the input cables and all of your effects pedals before it can reach the amp. As you can imagine, by the time a guitar’s signal finishes making its way all the way to the amp, the signal will undoubtedly suffer from a bit of degradation, losing its tone and body in the process. It's not your guitar's fault, it's simply the nature of electricity.
Another LTD model that is easily on the same level as the standard ESP stuff is the MH-100QMNT. The guitar comes from the very top of LTD’s entry level lineup, and brings a great price to performance ratio. I’ve had a lot of time to play with this guitar, and at first it didn’t sit right with me. As I played it more, I got used to the contour of the neck and the way its body ‘moves’. From that point on, ESP LTD MH-100QMNT grew on me rather quickly.

Distortion and overdrive: In the early days of electronic music, vacuum tube amplifiers were used for processing the output electrical signals. Like any amplifier, these tube amplifiers had a maximum amplification above which they began to clip the peaks of the waveforms. While the resulting distortion may have disturbed the electrical engineers, a substantial fraction of the musicians liked the distorted sound and it became part of the musical medium.

Yes, I see your point, quite. This article was not aimed at experienced Strat stranglers, but more at their parents or relatives, who may have wished to give them a pedal as a holiday gift but didn't know what to purchase or what the effects might be. We thought a simple guide might be helpful for the completely uninformed. Obviously, we're not an established guitar journal, so thank you very much for your helpful and constructive critique.
This is a tricky one, because I’d hate to see anyone miss out on a bargain. Unless you really know what you’re doing, buying a used guitar is a risky venture. Definitely, you shouldn’t buy a second-hand guitar without seeing or trying it out. Again, sticking with well-known brands is wise. Look carefully for worn fret boards (pitted holes under frequently-played notes) and grooves in the frets themselves. Check along the neck to see if it’s not too bent— it’s supposed to be slightly curved. Getting problems like these fixed professionally can be expensive and you might as well buy something new in the first place. The bottom line here is that high-quality instruments that have been properly maintained don’t lose any value. A good second-hand guitar should cost you as much as a good new one — but yes, those bargains are out there, too.
Ease of Use: Multi-effects pedals are inherently more complicated to use than individual stompboxes. As such, we value multi-fx units that are not overly complicated, and require hours with the user manual to understand. Look for pedals with intuitive layouts and interfaces. Technology has come a long way, and most multi-effects pedals have good quality sound. To us, ease of use is a huge selling point (probably the most important behind price), and can differentiate the good from the great.
Although I left it up to our panelists to decide what they think is most important in a beginner’s amp, we all agreed on a few parameters. First, the amp should have no glaring technical flaws—it shouldn’t produce excessive amounts of noise or hum, and it shouldn’t exhibit audible signs of distress, such as buzzes or rattles. Second, it should produce enough volume that the guitarist can jam with instruments such as piano, saxophone, and a small drum kit.
A DPDT (2PDT or 2P2T) on/on switch has two channels (poles), each having three lugs. This is like having two SPDT switches in one. It’s the standard configuration for most push/ pull or push/push pots, and you can use it for almost all mods, including the seven-sound mod (if you leave one pole unconnected), coil-splitting a humbucker, out-of-phase mods (by adding some jumper wires from pole 1 to pole 2), a direct-through mod, and countless others. Let’s see what’s going on here.
What makes the THR100HD special is its clever digital power amp, which faithfully mimics the operation of real valves. Then there's the fact that you get two of everything: two preamps, both with a built-in booster function that behaves as a stompbox; two effects loops; two power amps; two XLR line outs. What you see is very much what you get, with a five-position amp voice selector, which packs three overdrives - crunch, lead and modern - and two cleans: solid, and er, clean. There's also a channel volume control, because the master volume control works inside Yamaha's Virtual Circuit Modelling environment, adding more drive to the THR's digital power amp simulation, which in turn has five different valve choices, as well as Class A or Class A/B operation. Lurking on the rear panel are two speaker-simulated balanced XLR line-outs, with a ground lift switch that uses the latest Impulse Response cabinet simulation. There are superb Fender-influenced cleans, bluesy touch-sensitive crunches and a choice of classic or modern lead tones, all footswitchable for your convenience. The tones are so convincing it's really hard to believe there are no valves. The interaction of the clever digital power stage with the loudspeaker is just like that of a good valve amp, and the virtual valve choices are uncannily authentic.
{ "thumbImageID": "LC100-Classical-Guitar-Natural/518978000010000", "defaultDisplayName": "Lucero LC100 Classical Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115036014", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Natural-1274115036014.gc", "skuImageId": "LC100-Classical-Guitar-Natural/518978000010000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115036008", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Black-1274115036008.gc", "skuImageId": "LC100-Classical-Guitar-Black/518978000001000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Pickup selectors can wear out over time. The lugs and the rotating switch can loose their tight connect with years of use. Also, many inexpensive guitars made today use cheap electronic parts. You may just want to upgrade your switch for more control and better selections. It is fairly easy to install a new pickup selector. Here are a few simple steps to replacing your pickup selector.
The "Slide Guitar Extension Nut" presents a bad case of convenience to the manufacturer (only having to make one size) disguised as a convenience to the customer (pretending one size fits all). This thing is not very versatile. With an outer string spread of 1.75", it's made for a wide guitar neck so if yours is only average, the outer strings will be suspended off to the sides of the overall width of the neck. That's not insurmountable but it's also not something every budding slide player wants to tolerate.
Bob, 66 is not too late to start playing. I play classical guitar, my preference and I -also play steel string scoustic guitar. I own a Taylor because it lends itself nicely to finger style picking (carried over from my classical guitar. I play with a harpest who did not begin playing until she was 73. She is now 86 and plays someplace almost every day of the week. It's never too late to begin. Go for it I'm 69 and playing more gigs than ever.
{"product":{"id":"K47863","stock":"","price":"399.99","name":"California Redondo Player Acoustic-Electric Guitar","download":false,"sku_id":"","checksum":"368856727023","rep_id":"site51500000000140752","displayId":"1500000000140752","sku_rep_id":"","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
I'm pleased more and more people are realising this. It really is blindingly obvious when you think about it. Anyone who talks about "resonance" when talking about a solid electric guitar body is completely missing the point, and the point is to remove, as far as is possible (and that's pretty far), any influence the body has on the amplified sound. So the primary quality you're looking for in a solid electric guitar body is not resonance, but density.
But no all are created equal, and I don’t really do this — I have live performance gear for anything I do, actually, way more than I need at this point. But a good friend of mine does the whole live-thing-throug-PC and has completely sold his soul to Ableton Live (Music production with Live and Push). You can find Ableton Live Intro online for about $99. It’s not just a live performance tool but also a DAW, you can use it for recording, composing, etc. Again, not one I use, but probably what you want if you’re going for live playing.
Today's use of Torres and post-Torres type guitars for repertoire of all periods is sometimes critically viewed: Torres and post-Torres style modern guitars (with their fan-bracing and design) have a thick and strong tone, very suitable for modern-era repertoire. However, they are considered to emphasize the fundamental too heavily (at the expense of overtone partials) for earlier repertoire (Classical/Romantic: Carulli, Sor, Giuliani, Mertz, ...; Baroque: de Visee, ...; etc.). "Andrés Segovia presented the Spanish guitar as a versatile model for all playing styles"[5] to the extent, that still today, "many guitarists have tunnel-vision of the world of the guitar, coming from the modern Segovia tradition".[6]
This Yamaha Pacifica features a Strat sound that is very good, especially since the humbucker can be tuned into a single pickup by lifting up on the tone control. Like with every other strat, it has a five-way switch which allows the player to select the bridge pickup, the bridge+middle pickups, the middle pickup, the middle+neck pickups, or just the neck alone. In the event that you are tired of the strat sound and you would like to return to Led Zeppelin, simply flip to the humbucker and get set to go!

The Les Paul Triumph bass, like the Les Paul Recording guitar was first shipped in 1971, but was based on a slightly older model, the 1969 Les Paul Bass. Functionally, these basses were very similar, although the Triumph did offer low and high impedance operation, without the need for a transformer cable. This owners manual details the basses specifications, suggests a string set, recommended action, and suggests a series of tonal settings for rock, country and solo bass playing.
{"pageName":"[gc] pdp: washburn xmdlx solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","products":";114096449;;;;evar65=null-Guitars-Washburn","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}

This is a product of Colorado USA, every detail of this guitar was hand painted with waterproof organic non led based paint. It is brand new fully functional acoustic guitar. Become the center of attention on your party with this beautifull vibrant instrument. Perfect for a present (Christmas, Valentine, or b-day) for your loved one, family or a friend. Come in to the magic world of music with this beautifull hand painted acoustic guitar. Fill the positive energy of Marcy's artistic story through your song.  The artist Marcy Snow all the way from Colorfull Colorado presents you this unique hand painted acoustic guitar .

Imagine someone telling you about an old-time music store that had a huge stash of unsold guitars from the 1960s, plus some guitar effects from the ‘70s lying around in its upper floors in Newark, NJ. Well, you can bet it didn’t take long for me to beat a path to the door of Newark Music City (calm down; this was a long time ago and, while the company still exists, it’s long gone from Newark). Even though I was late in the game, there were still unmined treasures to be had. A real Temple of Doom!

Solid-state amplifiers incorporating transistors and/or op amps can be made to produce hard clipping. When symmetrical, this adds additional high-amplitude odd harmonics, creating a "dirty" or "gritty" tone.[37] When asymmetrical, it produces both even and odd harmonics. Electronically, this is usually achieved by either amplifying the signal to a point where it is clipped by the DC voltage limitation of the power supply rail, or by clipping the signal with diodes.[citation needed] Many solid-state distortion devices attempt to emulate the sound of overdriven vacuum valves using additional solid-state circuitry. Some amplifiers (notably the Marshall JCM 900) utilize hybrid designs that employ both valve and solid-state components.[citation needed]
We’ll talk more about the sound quality shortly. To give you a gentle introduction, Line 6 has been in the amp and effects modeling game for a long time. Their POD line of guitar effects processors has been around for a while, and you might be familiar with their Pocket POD. Some of you might also know them for their extremely popular digital delay pedal and looper, the DL4 (an absolute mainstay on pedalboards everywhere). Line 6 makes several multi-effects units, and according to the research we did the POD HD500X (from their POD HD X series) is the one mentioned and recommended most often. They make a rack-mountable version of it, but we’re more interested in the floor pedal unit. This is a multi-effects pedal, amp simulator, incorporates an expression pedal, tuner and looper, and doubles as a USB audio interface, just to name the basics.
While styles and models may vary, electric guitars operate on the same general principles. The pickup mounted on the electric guitar’s body functions as a magnetic field. When a metal string is plucked and vibrates, it generates a current. That current is transmitted by the pickup through a preamp circuit with tone controls to the guitar cable, and in turn to the amplifier. The amplifier boosts the signal and modifies it with various tone controls and effects, depending on the amplifier's design and capabilities. The signal is then output to a speaker, which converts it to sound waves. The type of pickup(s), tone controls, strings, playing techniques, and other factors built into the guitar's design all influence the signal that is sent to the amplifier. In short, each component of the guitar affects how the guitar sounds.
As mentioned above, the Martin DSR2 comes with an all-solid wood body, with traditional solid spruce as its top. In conjunction with the solid sapele back and sides, this configuration produces premium level Martin dreadnought tones, albeit with stripped down aesthetics. The neck is as familiar as it gets, with its 1.75" nut width and 25.4" scale length.
The Effect: Pedalboards are not guitar effects, but are an essential piece of equipment for every musician utilizing more than 2 or three pedals. Essentially, a pedalboard is a casing for guitar pedals, specially crafted to house a number of effects – typically ranging from 4 to 12. In some cases, boards come as just casings and it’s up to the player to sort out the electronic department and powers supply; in other cases, all the electronics are included in the mix and even cables are included. So in a nutshell, boards make your pedal use far more convenient and practical. In our opinion, they are an absolute must-have for any player who has more than two effects in use. For a first pedalboard I would recommend the Donner DB-2 as a great option.
I've had my Dorado, model #5986, serial #41 since 1972 and have used it for classical guitar study off and on since getting it as a gift. For what it is, the sound quality and playability are quite good. I'm donating it to a church rummage sale tomorrow (6/3/07) and will remember it fondly. I have an Alvarez Regency, similar to the Dorado, which lacks the sound character.
During the NSF grant cycles, the STEM Guitar Project has exceeded initial estimates of faculty impacted by recruiting over 450 STEM educators, with an additional 500 faculty exposed via national education conferences. Thus far, this effort is impacting over 20,000 students nationally over the 8 years because of faculty members adopting or adapting the curriculum developed through the project.
Description: Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: Humbucker - Pickup Configuration: H-S-H - String Instrument Finish: White, Black, Red, Sunburst
Makers of the Elk badged guitar from the early to mid 1960s to 1975, although other sources indicate that the Elk brand did not stop production until the early 1980s. Elk badged guitars came in clear acrylics in addition to colors in the early 1970s, which was an attempt to copy clear acrylics designed by the legendary Dan Armstrong in the late 1960s.
You finally bought that guitar you've been eyeing for a long time. You open the case, gently remove it from its plush cradle, and hold it in your arms. A fresh pick in your fingers, you begin an elegant and complex arpeggio that ranges across the fretboard. Suddenly, right in the middle of the run, the strings start buzzing. You check your technique and it's fine. So what's the problem?
The first of these guitars was the Slash “Snakepit” Les Paul Standard, which was introduced by the Gibson Custom Shop in 1996. It has a transparent cranberry red finish over a flame maple top, a relief carving of the smoking snake graphic off the cover of Slash’s Snakepit‘s debut album, It’s Five O’Clock Somewhere, hand carved by Bruce J. Kunkel (owner of Kunkel Guitars –, and a mother of pearl inlay of a cobra wrapped up the length of the ebony fretboard. Production was limited to 50, with Slash receiving the first four including the prototype, the only one with the carving on the body turned 90 degrees to be viewed right side up when displayed on a guitar stand. In 1998 Slash’s studio was broken into and his guitars were stolen, including the “Snakepit” prototype, so the Gibson Custom Shop built him a replica. These guitars are by far the rarest and most collectible of any of the Gibson Slash signature guitars, they sold for around $5,000 when new, the Hollywood Guitar Center was asking $20,000 for one in 2002.[citation needed] In 1997, Epiphone released a more affordable version of the “Snakepit” Les Paul, featuring a decal of the smoking snake logo and standard fretboard inlay.[32]
You should have been making all the above adjustments with the preferred gauge of strings, but since you have probably loosened and tightened the strings a number of times over the course of this process, you should now put on a fresh set and do a final check of all the settings Neck adjustments in particular can tend to settle in over the a couple hours after they have been done, so I find it best to then let the guitar sit overnight and do a final check the next day. The bottom line in ending up with a quality set-up is making each of the important adjustments in the correct order: Neck- then Nut- then Bridge saddles.
The clipping detector stages receive inputs from the guitar preamp and the reverb recovery amp, they act in an identical manner. The 1458 op-amp is wired as a comparator with a threshold that is near the high side of the allowable voltage swing on the associated 2N3906 preamp stage. If the transistor output exceeds this voltage, the 1458 output turns on, causing the 4011 one-shot pulse stretcher circuit to fire. The one-shot circuit activates the LED, and stays on long enough that even minor clipping on the amplifier causes visible blinking.
Built-in mics aren’t necessarily the budget option as they can be seen on some high-end guitars. They’re extremely helpful when you need volume but not so much where the acoustics of your setting, say in a concert hall, carries sound projection for you. However, the internal mic can raise problems for the performer as they’re prone to producing unwanted feedback. Multi-blend pickup and preamp systems allow you the flexibility to switching out from the mic when it proves to be problematic. However, if you’re going to install one yourself, look for one with a high feedback resistance of exceptional quality.
We are recording between June and July our new album entitled "Brutal Agression" which should be out in October/November, also we were recently invited to Rock al Parque in Bogota, which is one of the biggest festivals in Latin America, joining Cannibal Corpse, Havok, Symphony X, Internal Suffering and many more. After that we will play at other festivals such as Mamut Fest y more to be confirmed, then we will concentrate on album release and touring, which will be accompanied by one or more videos.
I borrowed the above quote from an article on effects pedals by Robert Keeley (a maker of seriously fine effects pedals) which can help you remember the order to place your pedals. I have a few slight modifications and additions to this that I use, but this is a great way to remember the rough order quickly, and it comes from one of the great pedal masters.
The Effect: Flangers belong to the modulation class of effects and are among the most unusual tools you can have as a guitar player. Being similar to phasers, flangers are often the subject of numerous controversies. At the end of the day, this effect is a different kind of beast. One of the best examples of a good flanger is the Electro-Harmonix Stereo Electric Mistress. This pedal was based on an older design that’s credited with pushing flangers to the mainstream. Another thing to know about flangers is that they can make or break your tone. Due to their aggressive nature, one has to be careful how much of this effects they use. It’s easy to get overwhelmed and lost in it.
Back in the mid-60s, a desire for independence in business led to John Skewes forming a small musical instrument agency and wholesale business based at his home near Leeds, England. Over time, his new business steadily began to take off, and soon included throughput of some self-branded lines of musical merchandise. That effective early decision to carry self-branded merchandise continues to this day, with their signature Vintage® acoustic and electric guitars and basses which were first produced and sold in 1985. Today, Skewes is the largest family-owned independent musical merchandise distributor in the U.K. and the Vintage ‘family’ includes Fret King® electric guitars, Pilgrim® Banjo’s and Mandolins, Laka® Ukuleles, Encore® electric and acoustic guitars, and Kinsman® cases.
I’ve been keeping track of completed Ebay sales since I started looking at Kents, and have come up with a few average sale prices. The way I figure an average is by first tossing out the highest and lowest sales. If I am left with fewer than three sales I don’t bother. That’s too small a sampling to be worthwhile, otherwise I take the average of the rest. The table below will only be updated when there is a sale that results in a change, so if the table looks like it might be dated, it’s probably because there haven’t been any sales that affected the numbers. Availability of Kent guitars on Ebay seems to ebb and flow.

As we mentioned before, the first mass-produced solid body electric guitar was introduced in the early ‘50s as a way for guitar players to avoid getting that unwanted feedback that amplified hollow body electric guitars were infamous for. Today, there are countless solid body guitars to accommodate any type of player and price range—from beginner guitar players to seasoned pros playing genres spanning hard rock, country, blues, heavy metal, jazz, and more! Some of the most popular solid body electric guitars include the Fender Telecaster, the Fender Stratocaster, the Gibson Les Paul, the Gibson SG, the Ibanez RG, and the ESP Eclipse.