As this effect is more pronounced with higher input signals, the harder "attack" of a note will be compressed more heavily than the lower-voltage "decay", making the latter seem louder and thereby improving sustain. Additionally, because the level of compression is affected by input volume, the player can control it via their playing intensity: playing harder results in more compression or "sag". In contrast, modern amplifiers often use high-quality, well-regulated power supplies.
I have a very unique Lyle guitar. It is apparently a 1972 but on the headstock it has the pearl from Gibson and it says Gibson on it as well on the headstock. It has the tail trapeze and the adjustable saddle. I recently had it set up and there is absolutely no fret buzz, it looks like it just came off the wall, stellar condition. My tech was stunned at the body condition and even the frets were like a new guitar? This is the only guitar I have seen that is definately a Lyle but it has Gibson, correctly done on the front of the headstock? I went in to the acoustic section and played a Gibson new hummingbird next to mine and it sounded cheap! I was stunned. I have no idea what this is worth but is like the perfect guitar. No dents, nicks, scratches, just and old guitar that has been babied, no warping anywhere, I think this will play another 30 years easy. If anyone knows about a Lyle with a Gibson logo and Gibson written on the headstock, please let me know
Specifically, the book includes exercises to focus on sweeping, alternate picking, string skipping, and bending in addition to arpeggios and legato. Keep in mind, this book builds on the skills you’ll learn and practice along the way. Having said that, intermediate players can jump a few chapters and still get a ton of value out of the guitar exercises in this book. In that way, it really can function as a choose-your-own-adventure type way to learn guitar that matches your current skill level.

The Univibe effect was produced to also mimic the sound of the Leslie rotary speaker, but in a slightly different way from the new digital pedals previously mentioned.  They often combine slight amounts of all modulation type effects at the same time to approximate the rotary sound, but became a unique sound of its own.  Some pedals allow some individual tweaking of each modulator, but most typically allow the user to adjust the speed of the Univibe effect.

One of the most appreciated brands on the market at the current time, the Epiphone by Gibson surely won’t let you down. The company was founded 144 years ago by Anastasios Stathopoulos and is still running today. This brand is known for producing top-notch guitars that many players love and recommend, the reason why its popularity increased over the years.

For some performances - those well controlled performances of an orchestral guitarist, let's say - machine notation can get a lot closer to producing a true sound than it will to the variations offered by a virtuoso jazz guitarist, blues master or metal thrasher jamming outside the box. In some cases, the machine sound might already fool some of the most discerning listeners -- if the performance does not test the limits of the mechanical emulation.

When we take a look at a guitar neck, it is important that the guitar is under string tension and in playing condition when measured. The PLEK measures the instruments neck and fret height with the instrument strung up to pitch. The computer ascertained a 3-D like graph of the fret board surface, including the position and height of the strings. Thanks to the PLEK SCAN the relief of the neck made by the string tension is taken into account while calculating the process-parameters. The operator then has the ability to manipulate the parameters to give the player an optimal playing instrument.
Now, none of this should take away from the actual tones, which are beautiful, even when not fully convincing.  I haven’t commented on Instant Guitar’s GUI yet and that should tell all you really need to know. It gets the job done well, but looks unfortunately ugly — or at the very least bland and not matching the high-quality of the sounds found in this line of guitar VSTs.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
Semi-hollow Body Guitars: The first and most classic semi-hollow body is the Gibson ES-335, which was quickly embraced with Chuck Berry and later sonically reinvented by Freddie King, Alvin Lee, Larry Carlton and a host of others in the ’60s and ’70s, who pushed semi-hollow Electric Spanish models into the ’60s and ’70s with aggressive technique and tones.

The STRATosphere is in no way sponsored, endorsed, or affiliated with Gibson Brands, Inc. LES PAUL®, SG®, ES®, EXPLORER®, FLYING V®, GIBSON®, the corresponding body shape designs and headstock designs are registered trademarks of Gibson Brands, Inc. The STRATosphere is not an authorized dealer or reseller of Gibson products. Therefore, Gibson products purchased through The STRATosphere are not covered under warranty by Gibson Brands, Inc.

The fact is, the qualities of different strings can have an effect on your guitar’s resonance and tone, on the quality and responsiveness of your attack as a plectrist or finger picker, and impact your speed and other important factors. And think about your budget. Some coated strings list at nearly $20, while a good basic set of electric guitar strings can be scored for $3 to $4 on sale.

Indeed, pros can be picky. Of course, they’ve heard, played and tried out innumerable electric guitars over the years and often have a high standard when it comes to the build, tone, playability and overall quality of the instrument. Many professional guitar players already consider themselves collectors, taking pride in what they have in their guitar arsenal.

Staggered brass saddles offer individual string intonation never before available in a design of this type, still widely regarded as the tone machine. The baseplate itself is a faithful reproduction of the original, made from steel, very important in a bridge of this style due to the tonal effect it has on the magnetic field of the pickup mounted in it.
PRS guitars are among the best on the market. Their style, tone and design are unique, giving them a pretty good chance against much more established brands. PRS Custom 24 has been my go-to choice, and will remain so in foreseeable future. If you are looking for good old American craftsmanship combined with a killer tone, PRS is definitely worth checking out.
Now comes the fun part. Put the jack and the tone pots into the F hole, and use the jack hole wire to feed the jack through the cavity. If the washer holds, the jack will pop up through the jack hole. Thread the wire through the jack washer and nut, and pull up on the wire to hold the jack in place while you tighten the nut. Once you’re sure the jack is firmly installed, clip the wire and let the washer end fall into the cavity. You can shake that out through the F hole later – just leave it for now.
B.C. Rich specializes in guitars for the heavy metal and hard rock crowd. They’ve produced some of the most legendary designs in the history of metal, including the Warlock, Bich, Virgin, and Mockingbird. Their instruments helped to mold the hard rock and thrash revolution of the 1980s and B.C. Rich is still a great choice for any guitarist looking for an instrument that looks and sounds as edgy as possible.
Volume pots don’t attenuate all frequencies consistently. Treble gets attenuated faster which results in treble loss when volume is rolled down. Treble bleed circuits (or bright caps) are there to compensate for treble loss and make guitar sound at lower volume as close as possible to sound with volume maxed. There are several different treble bleed circuits used or recommended by guitar/pickup manufacturers. What’s common between them is that they are installed across guitar volume pot (input and output lug).
Any vibration we can hear as "sound" is composed of some distribution of overtones above the fundamental frequency. Overtones exist in a set fashion based on the physics of vibrating waves and the ratios between them. The only difference in tone between any instrument is caused by a different prominence and distribution of these overtones. When a string is plucked on an electric guitar the vibrations move into the body of the guitar as well. The resonant properties of the wood will cause some of these overtones to be "summed" and exaggerated while others will "cancel" to some degree. The vibrating string will be influenced, however slightly, by the vibration of the guitar, in turn changing the distribution of overtones on the vibrating string - essentially creating a feedback loop.

The Yamaha's FG series FGX800C is a perfectly machined instrument. If there is one thing Yamaha is known for, it's the quality of their mass-produced acoustic guitars, which people like to pooh-pooh due to the romanticization of extremely expensive handmade guitars. Yamaha has perfected this machining process to a point where you wouldn't really be able to figure out if the instrument was put together by a luthier or if it was made on a factory floor somewhere. This is the case with nearly every accessible guitar these days thanks to machines reducing errors and driving prices down.

The chord below (an Am) is going to be used for demonstration. Firstly, you'll notice the name of the chord labeled up the top. Next you'll see a "grid" below it. This grid represents your guitar fretboard. The 6 lines running downwards represent the six strings on your guitar with the fattest and lowest sounding string on the left hand side. The horizontal lines represent the frets on your guitar neck. The top line is the top of the neck.
For those other performances, we run into limits of computer memory, computer processing power and computer programmers' time (and talent). With increasing processing power available in the consumer market, simulations are in some cases surpassing storage intensive sample libraries in terms of acoustic similarity and perceptive preferences. In guitar world, though, there seem to be no VST players of the simulation variety contending for top honors against leading sample libraries - of which seems to be the leading collection (unless you like something Vienna Symphonic Libraries has to offer)
Based on SGM-v2.01 ( with improved quality aoustic guitars (21mb) and basses (50mb) and also designed to run on apps such as Sweet Midi Player. This is a great GM SoundFont and the one I use on iPad/iPhone and PC.  You can comfortably run this GM Soundfont in Sweet Midi Player app on most iOS devices. For Windows PC you can install a new GM soundfont using the free program Coolsoft VirtualMIDISynth.

Splitting the humbucker #1: by grounding the coil-tap and connecting the hot lead to output we’re rendering the coil closer to ground useless because both of it’s leads are grounded. What we’re left with is the coil closer to the hot lead. Since we only have one coil, it will not be hum-cancelling on it’s own. It’s common to split a humbucker, so it can be wired with another coil in parallel, making the noiseless combination, especially on H-S-H guitars.
There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most people would consider to be a lot of money. Are there compelling reasons to spend your money on a handmade guitar from a custom builder rather than from a brand name factory or custom shop? There certainly are! … [Read More...]
THE CONTROL CAVITY Routing the control cavity is just as important as the neck pocket but with a couple more steps. The best thing to do is to cut out the plastic cover. Trace the pattern that you came up with for it on the plastic then cut it out with a jig saw. Use a fine tooth blade to prevent the plastic from chipping and will also yeild a smoother cut. Once this is done, take your template and reverse it, trace the patern on the back side of the body. Next set your router to a depth that is the same as the thickness of the plastic plate and rout the cavity working out to the line you drew. I do this free hand since the first cut is too shallow for a template. Be careful when you do this and test fit the plate you cut to make sure you get a goo fit. Then you will draw another line about 1/4" along the inside of the cavity you routed out, leaving extra room in areas for the screws you will use later on to secure the control plate. Rout this area out in the same way, working out to the line you drew. When you start to get close to the half way point in the wood start to think about how much wood you need to leave at the bottom. Usualy 1/4" is good but make sure you are careful! I miscalculated once and ended up going all the way through the body. Bad experience.
To ensure 100% customer satisfaction Bajaao offers 10 day return policy and we also pay for the return shipping to help you be free of the online shopping anxiety. Our content rich page is your one stop to get all the required information about the products be it the product description or the user generated hands on reviews. A friendly and knowledgeable staff is there to help you out with your queries should there be anything else you wish to know about the product, process, payment or after sale service. Our dedicated team will help you to select from the best of the products within your range. Call our experts to find out the best product to suit your style and need and buy electro acoustic guitars at the lowest prices in India.
Granular Guitars is the second exclusive VST Sound Instrument Set created by sound designer, composer and multi-instrumentalist Simon Stockhausen. Adding to the sound libraries of Padshop and Padshop Pro Granular Guitars spans nearly three gigabytes worth of studio-grade recorded samples, covering various acoustic and electric guitars as well as providing more exotic instruments like psaltery, celtic harp and oud played in traditional styles, plus experimental ways of treating the guitar. With 260 presets, Granular Guitars includes big cinematic soundscapes, beds and pads, beautiful fragile textures, plucked string sounds morphed into alien noises, heavy metal sounds and overdriven guitar screams clashed with divine New Age sounds.
The L-00 carries over the airy nasal tone and midrange emphasis of the original, making it great for tasty slide and classic rock riffs. Your favorite blues licks will also have more oomph when played through this blues box. For something so small, this parlor guitar can compete with standard size acoustics in terms of volume. Its solid sitka spruce top and solid mahogany back and sides work together well to give this seemingly diminutive instrument great clarity and good low end. – designs and sells printed circuit boards (PCBs) with a boutique look for classic and boutique pedal designs. Their active forum provides support for builders using the PCBs. A theme throughout their site is that you expensive boutique pedals are simply classic older designs with little or no modification, and you can easily build your own.

The size and shape of the ME-80 is comparable to the Line 6 POD HD500X, though the Boss measures a few inches smaller, and also weighs a few lbs less. This is a Boss product, and as such it’s built like a tank. No worries whatsoever over the build quality of the chassis, knobs, and footswitches. Starting with the rear of the ME-80, you can see the I/O is pretty basic - mono input for your guitar, stereo output, a headphones jack, AUX in (so you can plug in your iPhone and jam along to your favorite tracks), and a USB port. Like the Zoom G3X and the Line 6 POD HD500X, you can use the Boss ME-80 as a USB interface for your computer and record your guitar straight into your favorite DAW. Oh and one small inconvenience is that you’ll need to buy the power supply separately. Why Boss doesn’t just include one for a unit of this quality and price, we don't really understand. If you do end up getting the ME-80, this is the power adapter you want. It can also use 6 AA batteries which is good if you need to use this on-the-go, but we don’t recommend it as it will suck those batteries dry in no time.
{ "name": "Ruby Red", "skuUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar/l21430000002000", "status": "backorderable", "statusText": "Back Order", "pimStatus": "R1", "inventoryText": "Reserve now - Ships 11-28-2018", "inventoryKey": "available_date", "availableDate": "11-28-2018", "price": 999.99, "formatedIntegerValue": "999", "decimalValue": "99", "isOnSale": false, "msrp": 1430.00, "salePrice": 999.99, "listPrice": 999.99, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuL21430000002000", "displaySku": "L21430 000002000", "serialized": false, "stickerDisplayText":"Backstage Pass Members Earn 12% Back In Rewards On This Item", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/L21430000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"12-08-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Fullerton Standard Legacy Electric Guitar Ruby Red", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"12,000", "pdpLoyaltyPointsMultiplier":"1.5", "checksum":"581797334923", "restrictionType":"", "restrictionError":"" }
In 1977, Gibson introduced the serial numbering system in use until 2006.[71] An eight-digit number on the back shows the date when the instrument was produced, where it was produced, and its order of production that day (e.g., first instrument stamped that day, second, etc.).[72] As of 2006, the company used seven serial number systems,[71] making it difficult to identify guitars by their serial number alone.[71][72] and as of 1999 the company has used six distinct serial numbering systems.[72] An exception is the year 1994, Gibson's centennial year; many 1994 serial numbers start with "94", followed by a six-digit production number[citation needed]. The Gibson website provides a book to help with serial number deciphering.[72]
The 1960s were the Golden Age for guitars in America. The folk music boom was followed closely by the British Invasion and the demand for guitars skyrocketed as young people by the millions started making their own music. The Silvertone Amp-In-Case model 1457 was the entry point for thousands of them. Some of the most sought-after Silvertones are from this era … more
Music is an art, which can create pleasure in our mind. We can do it with the help of a good musical instruments like guitar, flute, harmonium etc. This art has the power to change our mood. Here we are introducing top ten best guitar brands with price in India. These brands are providing high quality guitar. Most of the musicians choose these brands. All are ensuring high performance. Some of the companies provide quality guitar at affordable prices. Our list covers ten well known company. They offer wide range of guitars. If you are looking for a good guitar brand, check out our list.

ESP is another Japanese guitar brand that makes this top 10 list with its many artist endorsements and actual user recommendations. Founded in 1975, it started as a builder of custom made parts for guitarists who want to personalize their existing instruments. Now ESP is known worldwide for their hot-rodded versions of popular guitar shapes, and other unique and eccentric designs, built to please modern rock and metal players.
In addition to the Les Paul, Gibson is a brand well known for pioneering some classic guitar shapes and constantly innovating, introducing concepts such as the humbucker, the digital guitar, and – most recently – the Min-ETune automatic tuning unit. Since the fifties, Gibson electric guitars have been used by everyone from James Hetfield to B.B. King.
With the new Shreddage 2X update released in July 2014, S2 is better than ever. Enjoy a brand-new user interface and totally rewritten engine, with intelligent string / fret selection, new features and options, even more customizable mapping, and new samples like powerchord slides and staccatos. You can also use new built-in effects pedals and save/load your own custom presets to use across multiple projects.
‘Power' Chords are used in most styles of music but are particularly useful for rock guitar; they even sound cool on acoustic (check out Nirvana's Unplugged album for an awesome example). The basic idea is that you only have to learn one chord shape, and that one shape can move around the fingerboard to make other chords. It uses no open strings, and muting the unused open strings is a very important part of the technique.
Most new electric guitars tend to ship pre-strung with "super light" guitar strings. Depending on your technique, and the style of music you play, that string gauge may or may not be too light for you. The following is a list of the standard string gauges included with each set of electric guitar strings. Note though that different manufacturers include slightly different string gauges in their sets of strings.
Meanwhile, in Sepulveda, Thomas Organ, after importing JMI's British-made amps for a short period in 1964–65, began to produce a line of mostly solid-state amplifiers in the United States that carried the Vox name and cosmetic stylings. With some assistance from Dick Denney, these amps effectively paralleled JMI's own transistorised amplifiers but were different from the British and Italian made Voxes in sound and reliability. To promote their equipment, Thomas Organ built the Voxmobile, a Ford roadster dressed up to look like a Phantom guitar, complete with a Continental organ and several "Beatle" amplifiers. Despite the huge marketing effort, Thomas Organ's Vox products did much to damage the reputation of Vox in the North American market for many years. By 1968, the company had also marketed a line of Vox drum sets (actually made by a German drum company, known as Trixon), which included a kit that featured a conical-shaped bass (kick) drum, that looked more like a wastepaper basket left on its side, and another with a bass (kick) drum, that looked like a flat tire. Such gimmicks did not help sales, and by the early 1970s Vox's American presence was virtually nonexistent.
Another strong point of this guitar is its African mahogany neck that has a close to standard scale length of 25.3", making this instrument very easy to transition to when coming from regular sized guitars. Also noteworthy is its innovative split bone saddle, which allows for better intonation. Finally, the CT4B preamp gives you 3-band EQ, a volume control and a nifty built-in tuner Artists that play Takamine guitars include John Scofield, Bruce Springsteen and Bruno Mars! This is a great buy if you are looking for a premium couch & travel friendly acoustic guitar that does not cost an arm and a leg.
“It had ‘Walking the Dog,’ ‘Route 66,’ and others on it,” Millard says. “That has tone. The reason it has tone is that it was made in the worst damn studio possible. Everyone who worked there said this was a shithole. There was no sound separation, they used lousy mics, they never cleaned it. Andrew Loog Oldham, who was the manager at that point, said that was the key to the sound.”
Blend potentiometers are a popular modification to instruments with separate volume controls for pickups, no master volume and/or no pickup selector. For instance, on the Fender Jazz Bass, the dual volume controls can be replaced with blend and master volume controls, to allow the instrument's output level to be adjusted with just one knob while still retaining the various combinations of the two pickups blended together.
Chorus is a great way to thicken up the sound of a bass (especially in a 3-piece band), rhythm guitar, or solo guitar. It is often used with distorted sounds but is a fantastic way to create full-sounding clean sounds as well. Stereo output (from two separate speakers) enhances chorus a great deal. Many acoustic guitar amps include a clean-sounding chorus effect adding depth and character to the amplified signal. Chorus pedals can be very helpful in fattening up the tone of acoustic-electric guitars whose piezo pickups tend to sound a little thin.
C.F. Martin & Company is a U.S. guitar manufacturer established in 1833 byChristian Frederick Martin. Martin is highly regarded for its steel-string guitarsand is a leading mass-manufacturer of flattop acoustics. Martin instruments can cost thousands of dollars and vintage instruments often cost six figures. The company has also made several models of electric guitars and electric basses.
Most Martin guitars made are "flat top" models. That is, they have a round sound hole in approximately the center of the flat top of the guitar, with a "pin" style bridge. Martin also made some archtop models during the 1930s. These can have a round sound hole, or two "f" style sound holes (one on each side of the top of the body), and have an arched top, with a "trapeze" style bridge. Martin also made ukuleles. If a guitar only has four strings (and is not a ukulele), this is known as a Tenor guitar. Uke size instruments with ten string are Tiples. Uke size instruments with eight strings are Taropatches. Martin also made mandolins, which have eight strings. To summarize:
For its tops (soundboards), Ovation used sitka spruce, a wood which Kaman engineers had been using in helicopter blades. In the 1970s, Ovation developed thinner sound-boards with carbon-based composites laminating a thin layer of birch, in its Adamas model, which has been viewed as one of the most radical designs in the history of acoustic guitars. The Adamas model dissipated the sound-hole of the traditional soundboard among 22 small sound-holes in the upper chamber of the guitar, yielding greater volume and further reducing feedback during amplification.[1] The Adamas design strengthened the sound-board, reducing the traditional design’s bracing and hence its weight. In the 1980s, another innovation was the introduction of shallow-bowl guitars, which appealed to electric guitarists.
For any venue, it's important to bring along the right amp. A huge amp in a tiny club is not only overkill; it's also extra setup work that you can avoid altogether with a smaller combo amp. On the flipside, a little amp in a big theatre could mean that some of the audience won't even hear you. Take your time deciding what the best option is for you.
Later, on-board electronics allowed guitarists to move about the stage, rather than stay immediately in front of a microphone. On-board electronic tuning, availability, uniformity, and frugal costs facilitated performances by guitar ensembles like Robert Fripp‘s Guitar Craft students. Ovation has also produced solid-body electric guitars and active basses.
Purchase the required hardware. There’s a lot of variety in terms of the looks and capabilities of the parts you’ll need for your guitar. You can choose based on the kind that existing guitars you like use, or experiment with something new. You can easily buy the equipment you’ll need from most guitar shops or online. For an electric guitar, you’ll need:[3]
A Flanger simulates the sound effect originally created by momentarily slowing the tape during recording by holding something against the flange, or edge of the tape reel, and then allowing it to speed up again. This effect was used to simulate passing into "warp speed," in sci-fi films, and also in psychedelic rock music of the 1960s. Flanging has a sound similar to a phase-shifter, but different, yet is closely related to the production of chorus.
Do you have an old guitar that requires knowing how to repair a damaged guitar body? Read on and learn some neat tricks for repairing body damage on a guitar. Body damage on a guitar ruins the acoustics. Body damage on a guitar body really make it useless in the playing arena. If you are looking to bust out that old guitar but need some handy advice on how to repair some old damage, MadeMan has the fixes for you. This article will give you the fixes for larger damage and the annoying little nicks and teach you the way to repair them.
Guitar amplifier design uses a different approach than sound reinforcement system power amplifiers and home "hi-fi" stereo systems. Audio amplifiers generally are intended to accurately reproduce the source signal without adding unwanted tonal coloration (i.e., they have a flat frequency response) or unwanted distortion. In contrast, most guitar amplifiers provide tonal coloration and overdrive or distortion of various types. A common tonal coloration sought by guitarists is rolling off some of the high frequencies.
{ "thumbImageID": "AZ2204-AZ-Prestige-Series-Electric-Guitar-Ice-Blue-Metallic/K76903000001000", "defaultDisplayName": "Ibanez AZ2204 AZ Prestige Series Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ice Blue Metallic", "sku": "sku:site51500000188731", "price": "1,999.99", "regularPrice": "1,999.99", "msrpPrice": "2,666.65", "priceVisibility": "1", "skuUrl": "/Ibanez/AZ2204-AZ-Prestige-Series-Electric-Guitar-Ice-Blue-Metallic-1500000188731.gc", "skuImageId": "AZ2204-AZ-Prestige-Series-Electric-Guitar-Ice-Blue-Metallic/K76903000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Buying an electric guitar will also require less force to play, but obviously the sound and styles you will be playing will be very different. I am a guitar teacher and I often recommend people start on an electric guitar,because it doesnt require as much hand strength. As for type of electric guitar, anything with a low action (strings close to the neck) will work well, try some out and you will feel the difference. But getting overly technical with guitar specifications is unnecessary, its like shopping for a mountain bike by comparing the tires...silly, eh.
Recent amplifiers may include digital technology similar to effects pedals, up to the ability to model or emulate a variety of classic amplifiers. Some modeling systems also emulate the tonal characteristics of different speaker configurations, cabinets, and microphones. Nearly all amp and speaker cabinet modeling is done digitally, using computer techniques (e.g., Digital Signal Processing or DSP circuitry and software).
Pre-delay on the reverb can help separate it out from the source sound. If your reverb has no controls for pre-delay, you can simulate this using a simple delay on an aux track before the reverb. Decay Settings: Choosing the most appropriate reverb treatment for a song can be surprisingly difficult, especially if you have hundreds of presets to choose from. So, instead of regarding reverb like the glue that holds the mix together, try adjusting its parameters (and in particular the decay time) while listening to the reverb return by itself. If the decay time is too long you'll hear a continuous mush of sound; if it's too short you'll scarcely hear it unless its level is turned right up. Somewhere in the middle you should find a setting that adds rhythmic interest to your song, without overpowering it, making the reverb work for its keep. This is also a useful technique when using several reverbs in a song, to make sure they complement each other. Martin Walker
Classic 000 Martin copy by the great Yamaha Nippon Gakki factory in Japan, Here is a fine example , no structural issues no cracks and neck is excellent and plays with ease because it has great action, intonation is 100%, beautiful patina of a true vintage 40+ year old with great workmanship and materials this example has stood the test of time like few have its not new or mint of course it has been played but not abused and taken care of and maintained and sounds better than new with its well aged TONE WOODS these are 40+ years old but when made the woods were known to have been aged over 20 years then so this doesn't compare to a new Yamaha all of those factors make this a rare survivor. Fun to play because it sounds so good and is easy to play. Pics soon to come. Questions for Joe or ready to buy email me at: .

Popular Categories: Body and Skin Care Air Conditioners Air Purifiers Anti Pollution Mask Cameras External Hard Disks Eye Care Face Cream Face Pack Face Scrubs Face Wash Fragrances Gaming Console Hair Care Hair Conditioner Hair Gel Hair Oil Health and Nutrition Health and Wellness Health Food and Snacks Laptops Makeup Mobiles Pen Drives Personal Care and Beauty Power Banks Protein Supplements Refrigerators Shampoo Smart Assistants Smart Watches Speakers Tablets Televisions Toiletries Toothpaste Washing Machines Water Geysers Water Purifiers Women Analog Watches

Onboard effects had already appeared on various guitars, especially Höfner and Vox models, but these were not truly “active” in the modern sense. Alembic, with support from the Grateful Dead, was exploring active pickup systems, but these were still basically custom-made instruments. Both had a master volume and tone control with three-way select and a “band rejection filter tone switch,” also called a midrange bypass filter. Ovation was among the first to offer linear potentiometers to correlate movement with effect. Controls inside were mounted on a circuitboard with individual trim pots that can be adjusted to control the volume of each pickup.
The question of how far away to place your mic really divides opinions. While Chuck Ainlay's 'just off the grille' seems to express the majority view, Bill Price preferred a position six inches away on the Sex Pistols sessions, while Steve Albini usually starts from around 10-12 inches away. Alan Parsons, on the other hand, avoids close placements: "Every engineer I've ever come across has always had the mic touching the cloth, and the first thing I do is move it away literally a foot. Let's hear what the amplifier sounds like, not what the cabinet sounds like... I might have it even further away if it's a really loud 4x12 cabinet — as much as four feet away." Ben Hillier also extols the benefits of more distant placements, up to six to eight feet, when he's trying to capture his favourite 'amp in a room' sound.

When used with the human voice, it is important that the pitch correction doesn't happen too quickly, otherwise all the natural slurs and vibrato will be stripped out leaving you with a very unnatural and robotic vocal sound. If only a few notes need fixing, consider automating the pitch-corrector's correction speed parameter so that it is normally too slow to have any significant effect, then increase the speed just for the problem sections. This prevents perfectly good audio from being processed unnecessarily.

Today, Van Halen is one of rock’s most influential and imitated innovators. As unpredictable and flamboyant as Hendrix, Van Halen has had an unmeasurable impact on the guitar community. By the mid Eighties, his self-described “brown” sound, over-the-top techniques (including two-handed tapping), and revolutionary trem-bar effects inspired a generation of aspiring guitarists who bought the one-pickup, one-volume-knob, Floyd Rose–equipped Strat-style guitars that Van Halen made famous.

Epiphone currently produces several models of the Les Paul including the entry level “Les Paul Special II”, which is generally made of a basswood body and a veneered top, a bolt-on neck (with dot inlays instead of the usual trapezoid inlays), lacks a binding, and has simplified electronics.[25] The next model up is the “Les Paul 100”, which costs approximately $US300, has similar features but it has the standard Les Paul wiring, mahogany body and a higher-quality paint job. The Epiphone Les Paul Studio is the least expensive Les Paul model to have a carved top and a set neck (features considered central to the feel and sound of more expensive Les Paul models), and is between $350–$400 depending on features and finish. The standard models are the “Les Paul Standard Plain Top” and the “Les Paul Standard Plus Top”. They cost $US550 and $US650 respectively. They both feature a solid mahogany body with a maple veneer and carved top; the “Plus” model includes a “flamed” maple finish while the “Plain” top is unfigured.[26]
Here we have a wonderful made in Japan Takamine from a while back in 1990 this makes it officially a Vintage guitar next year but its tone sounds rich and vintage now! As you will see looking her over this F349 is GORGEOUS!.... better than average condition in all aspects... few only minor doinks here or there but NOTHING to detract from this Taks sound - playability or sheer playing enjoyment... Excellent ALL Mahogany build construction, high AA grade mahogany, masterfully built - fit and finish excellent, neck angle is excellent so action is very good so playing is a breeze and quite enjoyable not all can state this...its 1-11/16ths at the nut so its a nice feeling medium profile " C " shape, frets are very good - excellent can barely tell its been played in fact if you polish them they will be as new...beautiful quality rosewood fingerboard no dead spots or funny buzzes noted...This guitars wood still shines like glass and overall is an outstanding original example with an addition of the best sounding Piezo transducer cleanly installed if I didn't tell you -you may not have noticed but she is also fully electric and sounds amazing amplified I played her threw my Princeton Reverb amp and it truly sounds bold & rich and rings like a bell with the newish Martin strings I installed (I have played this guitar in my office for a short while ) so they should be done stretching and are clean and ready to perform. This guitar is nearing 25 years old so don't expect a brand new guitar this is a beautiful vintage guitar and has personality and patina of a well treated well loved professional grade instrument. Its in excellent vintage condition. JVG Rated 9/10. If you want a rich sounding great playing fun vintage Japanese Dreadnought guitar well this one should put a grin on your face when you open her up and see it. Enjoy! Let me know if interested thanks for looking. Joe contact us at:
As mentioned, most of the ’50s Teisco guitars were heavily influenced by Gibson-style design. At the very end of the decade or just at the dawn of the ’60s, Teisco guitars began to change to double cutaways and exhibit a playful � if slightly frumpy � more Fender-oriented design aesthetic. This was almost in lock-step with American guitar industry trends. Gibson launched its thinline ES-335 in 1958 and, indeed, changed its single-cutaway Les Paul to the double-cutaway SG in ’61. American manufacturers such as Kay and Harmony quickly followed suit. The Teisco change was a part of the guitar Zeitgeist.
Today we are going to show you some of the best effects pedals from this category, which you can get right now. We have chosen a variety of flavors as well as price ranges, thus making sure that anyone can have access to a good reverb no matter what. More importantly, we want to use this opportunity to familiarize you with reverb as a guitar effect.
Upon starting the game and creating a new profile, Rocksmith 2014 asks you to assess your basic skill level so that it can tailor games and lessons to your specific ability. But it can also adapt on the fly based upon how well (or poorly) you handle a particular song, riff, or skill. That's key to Rocksmith's teaching prowess. And the feature immediately becomes clear when you select the Learn a Song mode, which allows the user to play through any one of the dozens of real licensed rocks songs included in the game.
Want to switch from pristine cleans, to vintage crunch, to face-melting distortion within seconds? You’ll probably want a modeling amplifier. Based on digital sound processing, modeling amps will combine many (sometimes hundreds) of iconic, vintage and modern amp sounds into a single unit, easily selectable at the twist of a dial or press of a button. Of course, the downside to modeling amps can be their recognizable digital tone, but when this means you have a whole guitar store worth of amps at your disposal it doesn’t tend to put many guitarists off.

Some guitarists consider the notion of modifying an electric guitar from its stock configuration distasteful, while others consider it mandatory. As a custom builder with a decidedly vintage background, I fall somewhere in between. Generally, I’m most in favor of maximizing an instrument’s usability without jeopardizing the ability to return it to original condition.
Turning our attention to the main controls on the front, it actually doesn’t look as intimidating to use as some owners of it make it out to be. Yes, you can get lost in tweaking and tinkering with amp models and effects until you’re blue in the face - but we actually find the interface to be nice and uncluttered, with all the footswitches and knobs nicely spaced out. On the top left there’s a small screen with some knobs surrounding it, and this is where the majority of your tweaking and editing will take place. Across the top are seven knobs which are meant to replicate what you would find on your amp. If you’re interested in the amp modeling part of the POD HD500X, you’ll appreciate having things like DRIVE, BASS, and PRESENCE immediately available. Two footswitches on the far left of the unit are responsible for up/down menu navigation, eight switches labeled FS1 to FS8 are assignable to individual effects, and finally there are two switches dedicated to the Looper function, and Tap Tempo/Tuner. You can also clearly see an expression pedal built-in on the right of the unit.
A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:
Before we begin, it should be pointed out that some time ago Guitar Player presented the history of Teisco, based on information painstakingly translated from a Japanese article penned by Mr. Hiroyuki Noguchi of Japan’s Rittor Music, editor of the Guitar Graphic book series. Unfortunately, the article used for reference was an older piece which has subsequently been totally revised and corrected by Mr. Noguchi based on later interviews with principals in the Teisco company. Some of the chronology in the GP story is inaccurate. What follows here is the latest and most accurate information on Teisco (in regards to company history), confirmed in repeated direct communications with Mr. Noguchi in Japan. This information also supersedes some incorrect facts in my own essay on Teisco Del Rey Spectrum 5 guitars in the first issue of Vintage Guitar Classics.
Like we said; if you’re just starting out in the world of electric guitar, a looper pedal is a great way to learn how to play in time and play with other musicians. As you can jam along with yourself, lay down a rhythm track and play lead over the top, you get to learn what works best. It’s also a great song writing tool as you can jam with yourself and create some killer tracks. You may not use it live but you’ll definitely use it!
{ "thumbImageID": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "defaultDisplayName": "Epiphone Les Paul Custom PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Alpine White", "sku": "sku:site51321473136588", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White-1321473136588.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51321473136458", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Ebony-1321473136458.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Ebony/H79039000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Many community, vocational or technical colleges offer technical and musical programs for those who wish to become guitar technicians. Many are instrument construction and/or repair programs. Guitar tech courses include construction, set-up, structural repair, fretwork, structural design and finishing for acoustic and electric guitars. Any courses involving musical theory and music technology may be helpful in advancing a guitar tech's career.
I think for somebody reasonable, the right answer would be that yes, it has an effect on the tone of the guitar and the notes coming off the strings, but not nearly as much as other factors in the design of the guitar. If you think I'm wrong then you should read more about the overtone series, the physics of sound, difference tones, and how sounds interact both as vibrations moving through air, and digitally as numbers in a computer. It's just not as simple as to say wood doesn't have a magnetic field so therefore it can't possibly affect the tone. It's true that much of what we hear is a result of the ear-brain axis, but there are also many fundamentally measurable physical properties of sound as it occurs over time (as all sounds do) that can easily explain why different types or shapes of wood could have a subtle but real effect on the tone.

{ "thumbImageID": "F335-Acoustic-Guitar-Black/512940000001000", "defaultDisplayName": "Yamaha F335 Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274115033905", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Black-1274115033905.gc", "skuImageId": "F335-Acoustic-Guitar-Black/512940000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51274115034006", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Natural-1274115034006.gc", "skuImageId": "F335-Acoustic-Guitar-Natural/512940000010000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tobacco Brown Sunburst", "sku": "sku:site51274115033955", "price": "119.99", "regularPrice": "159.99", "msrpPrice": "360.00", "priceVisibility": "1", "skuUrl": "/Yamaha/F335-Acoustic-Guitar-Tobacco-Brown-Sunburst-1274115033955.gc", "skuImageId": "F335-Acoustic-Guitar-Tobacco-Brown-Sunburst/512940000337000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Dorado instruments are of decent quality, but are often found at slightly inflated asking prices due to the attachment of the Gretsch name. Remember, these are 1970s Japanese guitars imported in by Gretsch during their phase of Baldwin ownership! Dorados are sometimes rightly priced between $125 to $175; but many times they are tagged at prices double that. Of course, what a guitar is tagged at and what it sells at (cash talks, baby!) are always two different animals.

This is a really special, limited edition guitar. Gibson are well known for their premium products, and the J-200 Standard certainly lives up to that billing. What we have here is Gibson’s modern interpretation of the legendary Super Jumbo that has been around in some incarnation since 1937. It’s an enlarged, round body style for big sounds and presence.
Named using Jim Marshall’s initials and numbers from his car's license plate, the Marshall JCM800 debuted in 1981. With the newly introduced Master Volume feature, the JCM800 allowed for crunchy, sizzling distortion at low output levels, making it the amplifier of choice for heaps of hard rock and metal players, including Slayer’s Kerry King and Jeff Hanneman and Slash of Guns N’ Roses. The JCM800’s popularity carried on beyond the Eighties, becoming a favorite of Fugazi’s Ian Mackaye and Tom Morello of Rage Against the Machine.

Gibson dates back to the late 1800s, when Orville Gibson patented a mandolin design that was much more durable than other instruments at that time. He sold these instruments out of a one-room workshop in Kalamazoo, MI, until his death in 1918. The designs lived on, however, as the company hired designer Lloyd Lear to continue creating new instruments.
Since they present a finer break point at the neck end of the strings’ speaking length, narrower vintage-gauge frets are generally more precise in their noting accuracy. From this, you tend to get a sharper tone, possibly with increased intonation accuracy, plus enhanced overtone clarity in some cases, which could be heard as a little more “shimmer.” If you’re thinking these are all characteristics of the classic Fender sound, you’d be right—or they are, at least, until you change those vintage frets to jumbo.
These guys are great! I took my Martin in for a refret, and it might have been the cleanest I have ever seen it done. Played better than it did when I got it. So after that show of quality work I took... my old Guild to them. It had developed a little belly bulge and warped top. Mark got that thing sounding and playing like brand new. They are priced honest and fair, and do work in a very timely manner. I am done looking for my guitar shop. I highly recommend these gentlemen. See More
ESP is another Japanese guitar brand that makes this top 10 list with its many artist endorsements and actual user recommendations. Founded in 1975, it started as a builder of custom made parts for guitarists who want to personalize their existing instruments. Now ESP is known worldwide for their hot-rodded versions of popular guitar shapes, and other unique and eccentric designs, built to please modern rock and metal players.
I found a Decca guitar lying in my woodworks shop at school, and my teacher let me take it home. My friend and I have been restoring it, and we nearly have it finished, the only thing missing is the tremolo spring. However the model of the guitar is kind of odd as we have not found any record of what type of guitar we own. Its a double cut-away archtop, with a tobacco sunburst and 3 single coil pick ups. We have looked everywhere and haven't been able to find any record of a 3 pick up Decca guitar. We're still looking...
Guitar effects pedals can range from just £30 each for cheap, Chinese-made copies to over £200 for boutique hand-made pedals with unique sounds. For the average good-quality pedal (made by a company such as BOSS, for example), you’ll be looking at around £50-£100. This might seem like a lot for one effect, but if you’re careful that one pedal could last years.
Guitar distortion is obtained and shaped at various points in the signal processing chain, including multiple stages of preamp distortion, power valve distortion, output and power transformer distortion, and guitar speaker distortion. Much of the distortion character or voicing is controlled by the frequency response before and after each distortion stage. This dependency of distortion voicing on frequency response can be heard in the effect that a wah pedal has on the subsequent distortion stage, or by using tone controls built into the guitar, the preamp or an EQ pedal to favor the bass or treble components of the guitar pickup signal prior to the first distortion stage. Some guitarists place an equalizer pedal after the distortion effect, to emphasize or de-emphasize different frequencies in the distorted signal.
Vox quickly grew. In 1964 Tom Jennings, to raise capital for JMI's expansion, sold controlling interest in JMI to the Royston Group, a British holding company, and sold American rights to the California-based Thomas Organ Company. Displeased with the direction his old company was taking, he left the company in 1967, which was around the same time that Marshall overtook Vox as the dominant force in the British guitar amplifier market. While Royston's Vox Sound Equipment division set up new operations in the Kent town of Erith, Tom Jennings set up a new company in his old Dartford location, joined later by Dick Denney. Jennings Electronic Industries operated for several years, making an updated and rebadged version of the AC30 along with other amplifiers, as well as a new range of organs.
{"id": "L21430", "skuOrProductId": "L21430", "categoryId":"site1AAG", "name":"Fullerton Standard Legacy Electric Guitar", "pageUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/gl-fullerton-standard-legacy-electric-guitar", "hasFeatures":"1", "isAccessory":"0", "message":"Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"30", "inventory":"0", "brand":"G&L", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"1", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "12% in Rewards", "checksum":"581797334923", "priceVisibility": "1"}

Martin ukuleles produced in greatest numbers in the smallest soprano size, but concert and tenor sizes were available circa 1922. Concert and tenor models were available in all the following styles, with the exception of Style 0, which was produced only as a soprano. Custom order ukuleles, while rare, were available upon request, and may have combined features from various styles.
What style of music do you play? While there are many versatile guitar amps that can be used for many styles of music, if you play a particular style of music a majority of the time, then you should get an amplifier that best suits it. Do you play acoustic or electric? Certain guitar amplifiers are designed specifically for acoustic guitars although it is possible to play an acoustic through any amp. In terms of styles, jazz players typically do not need an overdrive option as clean tones are best suited for that style of music. Blues aficionados will be happiest with a clean channel plus an overdrive channel with plenty of sustain, such as one finds on many vintage Fender models. Shredders will require an amp that will accept distortion pedals without losing signal quality. Do your research regarding which guitar amps are best suited for the type of music you play.
Pedaldoc – is a company specialized in the production of kits to convert standard guitar effect pedals into boutique sounding pedal stomp boxes. They carry “do it yourself” kits to modify many topselling Boss pedals, Electro harmonix stompboxes, Vox 847´s wah pedals and more. The only thing needed to perform one of their mods in is about an hour of your time and a soldering iron. Their kits are designed for guitar and bass players who may not have any knowledge of electronics and all the components that need to be substituted are clearly market on a picture of the pcb board of the pedal.
This is easily the most popular category of effect, and sonically is the natural first-step away from the thin sound of a straight, clean amplified guitar. If a player only owns one pedal, chances are it’s a distortion, fuzz, or booster box, and plenty of players have collections of several or even dozens of units from this genre, and use two or three at a time on their pedalboards for different colors and textures and levels of sonic sizzle. Yep, of the players who want to change their guitar’s pure sound in the first place, more probably want to filth it up than all of the other options combined.
Are you running it through a cab simulator? That or proper eqing. Turn up the mids and drop a high pass filter on that sucker. If you're finding it still lacking check out the KeFir cab simulator and then just use the preamp you have now. I've had wonderful results with that. If you're not liking your preamp try out The Anvil by Ignite amps. Best clean tone I've had out of freeware.
The instruction covers both electric and acoustic guitars. The music part is thorough but progresses pretty quickly. It covers a few genres so that you can get the specific information you want whether you’re playing the blues or going classical. The best thing about it is that it is an all-in-one reference that even experienced players will appreciate.

Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.
The Very Best Rock Vocalists All-Time Best Rock Frontmen Greatest Drummers Insane Rock Rumors That Are Actually True Druggiest Rock Stars of All Time What Their Kids Look Like Now Incredible Songwriters The Rockingest Women Singers Undeserving Members of the Rock HoF Great Guitar Rock Albums All-Time Best Rock Bassists Our Rock Hall of Fame Nominees Huge Stars Who Stepped Out of the Spotlight Old Rock Stars Who Still Look Pretty Good Rock Guitarists of the 1970s Rock Stars in Love Triangles The Greatest Living Rock Songwriters Mononymous Singers Greatest American Rock Bands Rumors That Were Never True
12. Once your wiring loom is complete, install it in the guitar, and reattach the pickup and ground wires. Test the guitar through your amp and make sure everything is working. If it is, congratulate yourself on a job well done. If it’s not, check that you’ve wired everything together properly. Also, check your solder joints and redo any that aren’t shiny or look a little iffy.
Pots generally come in two types: 500k or 250k. K refers to 1000 ohms and is a measure of resistance, which is the amount of resistance the signal from your pickup receives before being passed to your output. As a result, increasing or decreasing the amount of resistance your output receives via your volume pot affects the overall volume of your guitar.

Well technically, the floor and the ceiling do shape the tone, post amp. Room acoustics are a major factor in the quality of sound recordings. Also Dan isn't wrong. Each thing that vibrates that eventually moves the pickup (while a note is being played or sustained) will disrupt the magnetic field. In physics there is hardly ever an instance where things have absolutely zero effect on the things around them. It comes down to the significance of the effect. For example, if something moves the pickup .05 picometers six times a second, then it likely has a negligible effect on the sound (i.e. our ears are not capable of detecting any difference. There does come a point where other variables do begin to change the characteristics of the sound. Additionally, as a string is struck, due to the rigidity (or slight lack thereof) the neck and body will vibrate, changing the distance between bridge and nut. The shortening and lengthening of this distance will then change the vibration frequency of the string. This can result in the dampening of vibration or potentially slight amplification of frequencies or overtones. Overall, it is impossible to say with absolute certainty that something does not have an effect on something else in this case. The truth, however, is that the degree to which the change is noticeable may not be detectable by the human ear.
The company makes four models, the FS (fingerstyle), GC, D, and the Jumbo, each retailing at a flat price of $8,880 as of September 2011, making them amongst the most expensive new guitars in the world. The company also provides the option for customized furnishings such as exotic woods, buffalo horn nuts and saddles, mammoth ivory bridge pins and nuts, and specialized inlay and cutaway designs etc for an additional fee. The customized Petros guitars made of rare woods such as African Blackwood, Ceylon Satinwood or old flitch matched Brazilian Rosewood are sold for an extra $4,000 which with other furnishings such as ivory bridge pins can fetch over $13,000 in total.[2]
The ultimate in superb workmanship, total versatility. This deluxe 4 pickup electric will be played with pride by the most experienced performer.  Four simulated split pickups make possible virtually unlimited sound combinations. Powerful magnetic pickups are height adjustable. Ultra fast steel reinforced neck. Head and Rosewood fingerboard bound in White. .22 Nickel Silver frets (plus zero fret), 8 “N” shaped pearl position markers, 4 volume controls, 3 position rotary tone control (high-medium-low), Rhythm-Solo-Switch, 4 slide pickup switches.  Advanced type tremolo arm.  Chrome adjustable roller-type bridge.  Highly polished yellow-to-red-to-black sunburst finish.  Size 41″x14″.
And that’s about that. After ’93 Martin Stingers, like their previous Martin-brand cousins, started drifting off into solidbody byways of guitar history. The Stinger ST-2, basic fulcrum-vibrato Strats with pickguards and three single-coils, in black, red, and white, and the now ubiquitous droopy pointy headstock, was still listed in the 1996 Martin catalog, but these were pale reflections of the peak years.
There is enough acoustic guitars in the world to rock it to sleep, with a peaceful feeling of spanish legends to it. On the other hand there are enough electric guitars in the world to guarantee that it will never go to sleep, because there is always an electric guitar playing somewhere in the world. Which is exciting and which also causes the prices for electric guitar amps to be lower than for the amps of acoustic guitars, while retaining the same level of quality. The Roland Micro Cube Guitar Amplifier is a tiny little angel in the form of metal and plastic combined. It is small enough to be easy to carry around and store wherever, but it is also powerful enough to attract the attention of anyone passing you in the street, sitting in the bar, or otherwise hanging out in your vicinity. With a punkish style and a punk attitude, it is the perfect little helper for any musician, beginner or otherwise.

Despite its high production figures, Fernandes is better known in the United States for its Sustainer system, which uses electromagnetism[1] to vibrate a string for an extended period, so long as the user continues to fret a note.[2] Unlike the similar manual E-Bow sustainer, the Fernandes Sustainer can be used with a standard plectrum, because the sustainer is imbedded in the body of guitar. Fernandes' custom shop has installed numerous Sustainers into guitars built by other manufacturers.

By far the most common way to sort out this tablature selection is by artist. Some best-selling highlights include the Hal Leonard Jimi Hendrix Complete Guitar Tab Library, Alfred Led Zeppelin Box Set I-V Guitar Tab Platinum Edition and Hal Leonard Eric Clapton Complete Clapton Guitar Tab Songbook. And those are just a few examples from a library packed with hundreds of books. No matter what sort of music you want to play, there's tablature ready to teach it to you.
Sound images are very similar to visual images. If you're in a large auditorium, but standing on stage right next to an actor's face, you will see every nuance of his face, pimples, pores and all. You will not see his whole body though, and you won't see him in the context of the rest of the stage or the room. If you move back to the tenth row, you will lose some of the facial detail, but you will gain perspective. If you move to the rear of the auditorium you'll lose all the detail of the actor's face, but you see the whole enchilada in perspective.
A reluctant soloist, Yo La Tengo cofounder Ira Kaplan was credited with “naïve guitar” on the band’s first single in 1985 and didn’t begin taking the spotlight regularly until some two years later. Starting with a bucket of Velvet Underground moves, Kaplan became a consummate inside guitarist, too, a deceptively normal-looking dude folding in space jazz, barbed noise, spare country soul, and — when very occasionally called for — traditional feet-behind-knees rock jumps.
The more pedals you collect, the more you should consider investing in a pedal board as well. Some pedal boards are simply that – boards – to which you can stick your stompboxes to keep them organized. But you can also get powered pedal boards, which have built-in DC power supplies. That means no need for batteries or individual adapters connected to each pedal: just tether them to the central source, and you can power them all up by plugging the pedal board into a single outlet.

Let's discard the keyboard idea. And the human hand idea. Let's isolate the guitar player from the instrument. The player can manipulate only three parameters - the tone, velocity and duration of sounds to be generated. We have that in MIDI. (Okay, the guitar player can dance and wear a costume, but for our purposes, that's not part of the equation.)

This vintage Teisco Del Rey Japanese guitar was made in the 1960s and has a classic sunburst finish and tulip shaped body. Manufactured in Japan by the Tokyo Electric Instrument and Sound Company (yeah, you got it…TEISCo!), the Del Rey measures 37 3/8 inches x 11 1/4 inches at widest and longest points. The fretboard measures 18 3/8 inches in length from the nut to end. My dad bought this one from some guy at his work, who later supplied him with the original whammy bar and headstock hardware which he found later! The relatively small body size of the Teisco Del Rey was appealing to my wife, who was on the lookout for a smaller-sized guitar she could play. My dad replaced the original tuning pegs with much nicer chrome ones from a 1980’s Gibson SG and we took it home. However, she realized that she didn’t care much for electric guitar, so we decided to clean it up and sell it. Everything was in excellent shape, but it did have some electrical issues. The volume/tone pots were filthy and you could hear a wall of white noise as you turned the knobs. At the time, I didn’t know the marvels of Deoxit and contact cleaners, so I didn’t know how easy it would have been to clear that problem up. One of the pickups or pickup selectors also didn't seem to be working. It played OK without noise or distortion when the volume and tone knobs were set to 10 and the pickup selectors set to "black up, white down", but the sound could still fade in and out sometimes if you bumped the buttons or switches the wrong way. Again, simple issues that I could have cleared up with a soldering iron and contact cleaner. In any case, we meticulously cleaned it and put it up for auction. Despite the minor problems, a bidding war ensued and now this Teisco Del Rey Japanese guitar lives in Australia! Overall, the Teisco is a good playing trashy guitar with loads of funky style. Scroll down for more Japanese Guitars from our collection!
The earliest Teisco Spanish guitar of which I’m aware was the EO-180 from around 1952. This was basically a glued-neck folk-style acoustic guitar with a three-and-three slothead, round soundhole, bound top and glued-on bridge. Essentially dissecting the soundhole was a large triangular round-cornered pickguard with a white insert shaped like a sock, toe pointing toward the head, with a white-covered pickup situated on the ankle of the sock, just behind the soundhole on the bridge side. The cord appeared to come out of the side on the lower bout.
Boogex is a guitar amplifier plug-in with a variety of sound shaping features.  With Boogex it is possible to get heavy distorted sound as well as slight distortion sound.  Boogex is also able to apply any speaker cabinet impulse response (selection of built-in impulses is available).  Processing latency is very modest - 96 samples (2.1 ms at 44.1kHz).  Boogex comes with several example factory presets.
Distortion – A dynamic effect that sounds like your guitar is being played through a loud, distorted amplifier. This can range from a slight crunch to a full-on metal distortion. The first distortion tones boosted the gain of an amplifier’s pre amp to the point where the guitar signal begins to “clip”. This clipping changes the harmonic structure of the guitar sound and the additional overtones heard as distortion. Connecting distortion pedals to the “front” of the pre-amplifier helps create the break up sound before it reaches the power amp.
You can set an octave to play the higher or lower notes or both at the same time. This is ideal for those who want to really thicken up their sound and are often used by heavy metal guitarists to make solos and riffs sound really cool! The Valeton OC-10 Octave pedal is a budget friendly choice and the Electro Harmonix Nano Pog is an industry standard option.
Where there is more than one pickup, a switch selects between the outputs of individual pickups or some combination; two-pickup guitars have three-way switches, and three-pickup guitars have five-way switches. Further circuitry sometimes combines pickups in different ways. For instance, phase switching places one pickup out of phase with the other(s), leading to a "honky", "nasal", or "funky" sound[citation needed]. Individual pickups can also have their timbre altered by switches, typically coil tap switches that effectively short-circuit some of a dual-coil pickup's windings[vague] to produce a tone similar to a single-coil pickup (usually done with push-pull volume knobs).