Yea, really depends on your area. At the local Guitar Center, the guy seems to know what hes doing. Overworked and underpaid if what iveheard about GC and Sam Ash techs is true though. Theres a local tech who got his site to be one of the top results and hes busy as well. Perfect work. And even though hes busy, hes fast too. Thats why his site is one of the top results though.


it's really hard to beat the ric sound. the 335 12's and fender 12's are cool, but really the ric has the sound we're all familiar with. that being said, everyone has different tastes and I encourage you to play as many different ones as possible. Jimmy Page used a Fender 12 on Stairway. I went rick for that early beatles sound. the neck is tiny but it's part of the instrument.
Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
Originally, the Californian brand created by Randall Smith in 1969 used to offer Fender mods, just like Marshall, to give the amps more gain or, in other words, more distortion. And they managed to seduce Carlos Santana and Keith Richards. The Mark series was the brand's flagship until the introduction of the Rectifier series whose name refers to their current rectifying technology (a rectifier converts AC to DC). Mesa Boogie is certainly the best-known brand after Fender and Marshall. It is still the reference among metal musicians, especially thanks to bands like Metallica and Dream Theater who tend to use Mesa products on stage and in the studio. More recently, Mesa Boogie introduced the Atlantic series that includes the TransAtlantic TA-15 and TA-30. These two amps reflect the manufacturer's interest in the "lunchbox" market.
Gibson’s drive to recapture the magic of the original “Patent Applied For” humbucker pickups of the 1950s culminated with the introduction of the Burstbucker line in the early 1990s. In 2002, Gibson followed up this innovative accomplishment with yet another breakthrough in pickup design—the Burstbucker Pro, designed specifically for the new Les Paul Standards. The Burstbucker Pro features an Alnico V magnet (instead of the Alnico II), which offers slightly higher output and allows preamps to be driven a little harder to achieve a more natural break-up. Like all Burstbuckers, the Burstbucker Pro has asymmetrical coils—true to the original PAFs—which supply a more open sound. The Burstbucker Pro Neck is wound slightly less than the original PAFs, while the Burstbucker Pro Bridge is slightly overwound for increased output. The Burstbucker Pro pickups are also wax potted to allow loud volume pressures with minimal feedback.
This has always been one of the most revered brands of guitars amongst professional musicians. They sell one of the most affordable and durable electric guitars. The acoustic and classic guitars sold by this brand are ideal for students and beginners. The dreadnought sized body with cutaway has a Sitka spruce top with nato back & sides. The neck has 20 frets & dot inlays on the fretboard and made of nato. The bridge and fingerboard are made of rosewood. Yamaha’s own System55T. The starting price of a Yamaha acoustic 6-string guitar is 6990 INR.approximately.
When I was a kid in the 60s, all of the Japanese brands (probably ALL made by Teisco) had a really bad rap and only kids ended up with them. Some were very cheaply made, with weak metal, thin chrome plating, funky finishes and thin pickups. I owned a Rodeo, which was terrible. But then, who knew much about guitars then? Nowdays, anything has character.
“It was just a different world,” Ford says. “There was ‘Don Kirshner’s Rock Concert,’ Ed Sullivan, Dick Clark, and they would have one band on and you would wait all week to see who that band was going to be. And you could talk about it all week long with your friends — ‘Saturday night, Deep Purple’s going to be on, what are they going to play?’ — and then everybody’s around the TV like you’re watching a football game.”

Manne guitars - This Italy based guitar manufacturer produces instruments with unique features. The first Manne guitar was built in 1986 and they continue to provide finely crafted instruments based on some very original design concepts. Manne's design philosophy: hand craft the finest stringed instruments then offer them to the public at a reasonable price.


This is an American brand of guitar that is available in India. It was created in the year 1873. After a few years, it was bought by Gibson Guitar Corporation. Epiphone has a compact non-cutaway body made entirely from laminated mahogany. The neck features smooth slim taper profile, fretboard made of rosewood and 20 frets. Epiphone guitars India price starts from 14,000 INR approximately. This is the brand of guitar that is nylon strung and offers highest standards in acoustic and electric guitars.
Also like Taylor, high-end Martin guitars can cost thousands of dollars and are out of the reach of many players. But the DRS2 Acoustic-Electric is an affordable guitar that will keep you under budget, and allow you to own a real Martin. It features a dreadnought body style for strong projection, and is constructed using a solid Sitka Spruce top, solid Sapele back and sides and a Stratabond neck. Stratabond is a strong laminate Martin has been using on some of their guitars in order to preserve some of those aforementioned tonewoods, and keep costs down. Richlite is another eco-friendly material, and here Martin uses it for the fingerboard and bridge.
AmpliTube Free is a cool entry level program for those that want to experience software based guitar effects and amp modeling without spending money. It only comes with 9 stompbox and 2 rack type effects, but it covers essential effect types which are good enough for various musical genre applications. Should you need more, AmpliTube offers an upgrade system in which you can shop for additional amps, cabinets, mics and effects. Each model can even be tried out for free for two days prior to purchase, quite impressive for a free software!
In 2005, after two years of research and development utilizing Jimmy Page’s actual guitar, Gibson Custom Shop issued a limited run of Jimmy Page Signature guitars based on Jimmy Page’s No. 1 1959. This time, Gibson worked directly from Jimmy Page’s actual guitar, which he lent to Gibson for the project. The guitar featured just one push-pull pot, just like Page’s No. 1, which reversed the phase of the pickups in the up position, which in Page’s own words gave “a close approximation to the Peter Green sound.” Gibson also went to great lengths to replicate the accuracy of the pickups, creating two custom pickups, which were available only in this guitar. The pickups were based on the Burstbucker vintage-style pickups, but featured stronger Alnico magnets and slightly higher output than the other Burstbuckers, as well as slightly higher treble response, which accurately reproduced the sound of the pickups in Page’s guitar. Gibson also replicated the neck profile, which was heavily modified prior to Page acquiring the guitar, and the Grover tuners that Page favored.
Honestly, a couple of years back I never looked at Fender for acoustic guitars because everyone was always talking about Taylors, Gibsons, Martins, Takamines, Paul Reed Smiths etc. Despite being a very good electric guitar company not to mention the inventor of the no. 1 guitar in the world, the strat, everyone always looked Fender, alongside with Ibanez and Washburn (good electric guitar brands) as bad acoustic manufacturers. I was one of them too. For me, Washburn and Ibanez might be a good budget acoustic guitar manufacturer but they don't deserve to be high in this 'top acoustic guitar brands' list. But for Fender, these past few months my mindset about them changed. I never realized how authentic and good sounding fender acoustics were way back then but I'm happy now that I changed my mind about them. I love them now. It's not about having vintage acoustics, or having high end prices. Fender don't set their prices as high as taylor, martin or gibson but they must not be judged ...more
An equalizer (more often called EQ) is the device that allows you to adjust certain frequencies within your tone. The 3-band part implies that the EQ offers three points of control: bass, middle and treble. While 3-band is the standard, you can also have 2-Band EQ (which tend to offer just bass and treble), as well as 4-band EQ, 5-band EQ (low-bass, mid-bass, midrange, upper-midrange, treble) and upwards! Of course, the higher the band, the more versatility the amp offers. But 3-band tends to be the easiest to get to grips with.
It comes with a single coil pickup in the neck position and a humbucker at the bridge - switching between the two pickups gives you both a strat like sound and an LP like tone. The pickup selector is 3-way so you can play with both pickups at the same time. It sports a shorter 24.75" scale length and smaller 12" radius on the rosewood topped mahogany bolt-on neck with a 1.6875" nut width making it very playable and accessible to guitarists of all levels of experience. Many customer reviews suggest the Empire HG feels and plays like a more expensive guitar.
{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Black", "sku": "sku:site51296155735782", "price": "129.99", "regularPrice": "159.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black-1296155735782.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000-00-60x60.jpg", "imgAlt": "" } ] }
An electric guitar with 6 strings, dark blue metallic in color without case. It is has its body made of rosewood and its neck from the maple. The fret boartd is made from rosewood and has dimension of about 106.7 x 52.6 x 12.4 cm. The guitar goes for about INR 13,990 depending on prevalent market factors. you can get more information by clicking on the following link:
E-B-E-G#-B-E (use light gauge strings because three strings must be raised) Open E is used by: Brian Jones on "No Expectations", "I Wanna Be Your Man"; Keith Richards on "Salt of the Earth", "Prodigal Son", "Gimme Shelter", "Jigsaw Puzzle", "Jumpin' Jack Flash", "You Can't Always Get What You Want" and by Bob Dylan on his 1975 album Blood on the Tracks. By Hoobastank on their first and second albums, and by Junior Campbell on The Marmalade recordings Reflections of My Life and I See The Rain Used by Johnny Marr of the Smiths on "The Headmaster Ritual".

Bill Collings dropped out of medical school in the early 1970s[3] and instead worked in a machine shop for five years.[4] At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.

{"id": "K47863", "categoryId":"site5ABA", "name":"California Redondo Player Acoustic-Electric Guitar", "pageUrl":"/Fender/California-Redondo-Player-Acoustic-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/California-Redondo-Player-Acoustic-Electric-Guitar-Jetty-Black/K47863000001000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"399.99", "priceMin":"399.99", "priceMax":"399.99", "msrp":"400.01", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"392", "brand":"Fender", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMID,site5LAAB", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"352089750023", "priceVisibility": "1", "itemType": "New"}
A common acoustic body style that makes use of a very large soundboard is the dreadnought. Dreadnoughts are distinctive for their square bouts, wide waists, and 14-fret necks. The first dreadnought was developed in 1916, and it has been gaining in popularity ever since. Dreadnoughts are very popular among bluegrass guitarists due to their powerful, driving sound.

When talking about 1920s Martin guitars, you hear people say this a lot (especially if they are trying to sell you a guitar!) Unfortunately there is no definative way to tell if a 1920s Martin is capable of handling steel strings. The term, "braced for steel strings", though is inaccurate. A better way to put it would be, "built for steel strings". For a 1920s Martin to be built for steel strings there were several small changes - the top, braces and bridge plate are all slightly thicker. Can you see this inside the guitar? For the most part, no, unless you really know what you are looking for (frankly I can't tell). So how do you know if a 1920s Martin is built for steel?

If all other Telecaster models fail, the Standard Tele is a safe pick. The two Tele pickups provide a warmer tone and add more “twang” to your sound than the other pickup configurations we’ve seen. I’ve had some Telecasters get strangely noisy, with even the more expensive American models needing help from a good noise suppressor. It’s not a universal Telecaster problem, but the Tele pickups (especially the neck variation) can be susceptible to excess noise.


{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: supro","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"supro","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
The Fretted Synth website has mysteriously disappeared (the likes of Native Instruments not happy that they’re giving away so much goodness for free??), so we’re linking to the Rekkerd page that still seems to host the plugins. FreeAmp3 really shouldn’t be free: it features masses of sound-shaping potential and the user interface looks great. If you just want one (free) VST guitar plugin, get this.

All Vintage V6’s offer an extraordinarily high level of specification including the revered Wilkinson WVC original specification vibrato featuring authentic bent steel saddles for that classic sparkle and tone; precision machined pivot points for total ‘return to pitch’ accuracy and a stagger-drilled sustain block to prevent string hang-up. An adjustable, ‘vintage bend’ push-in arm completes this definitive vibrato system..
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
The fretted instrument market is in many ways an excellent leading edge indicator of world economic conditions as a whole. China is not only rapidly advancing in the fretted instrument market but in all areas of manufacturing. Furniture factories in North Carolina are closing due to competition with imported Chinese products of equal quality for far less money. Numerous other industries are moving offshore. As you have all noticed the price of gasoline has risen dramatically in recent months. It should be noted that China now consumes approximately an equal amount of petroleum to Japan. This was certainly not the case five years ago. If OPEC and other producers pump the same amount of oil as they used to, but China emerges as a new player consuming this much fuel, it should come as no surprise that prices will go up. China now is a major importer of fuel, wood and agricultural products. Commodity prices in general are rapidly rising. China is not only becoming a world leader in manufacturing but it is becoming one of the world's leading consumers of all sorts of raw materials and commodities. While the per capita income in China and the per capita consumption of fuel is much lower than in the USA, their population is well over a billion people. At the rate they are going it will not be long before they consume fully as much fuel and other raw material as we do and have an economy which could rival the annual GNP of the USA. Not only are they an economic and manufacturing powerhouse, but they have a huge army. As their manufacturing capability increases not only quantitatively but qualitatively they become more and more of a super power. While the USA may have won the cold war with Russia, at the rate things are going as much as American consumers may benefit from inexpensive but high quality-guitars, furniture and other products from China, we may find ourselves in the uncomfortable position of no longer being the only world super power.
There's no wrong answer to which neck will work best for you. When people speak of rounder vs. flatter being better for chording/bending, they are referring to the radius of the fretboard, not necessarily overall neck shape. The fretboard on all guitars has a curvature across is, from the the treble to the bass side. Generally speaking, most people would agree that rounder fretboards facilitate better chording, while flatter ones facilitate better bending, but even that's not hard and fast.
It’s true that the best guitars are built from the inside out, and Vintage enjoys a well-earned reputation for building great vintage electric guitars. Working with acknowledged guitar industry guru Trevor Wilkinson, Vintage has created a fantastic line-up of Wilkinson-equipped Vintage electric guitars and basses. Using Trev’s excellent range of pickups, tuners and hardware has taken Vintage electrics to the next level.
From the low-string riff for “What Difference Does It Make?” to the deep tremolo textures and swooning string bends of “How Soon Is Now,” Marr always seemed to have the notes and the tone to suit the moment perfectly. Marr’s work has been profoundly influential to guitarists of the Nineties and beyond. Noel Gallagher of Oasis dubbed Marr “a fucking wizard,” and Radiohead guitarist Ed O’Brien has cited Marr as the reason he picked up a guitar. In essence, Marr is a classicist, drawing much of his approach from the guitar sounds of the Sixties British Invasion, yet deftly adapting those influences to rock and roll modernity.

3/4 guitars are fine for children under the age of 11, or as travel guitars, but if you want to learn properly, then buy a full-size guitar at the start. I started on a full-size classical guitar right back when I was knee-high to a grasshopper; initially, it's hard, but your fingers adapt fast enough and you will soon develop flexibility and dexterity. For children under 11, a 3/4 guitar is an option, but even then I still feel that full-size is better. Check out all the amazing 6-year-old kids playing amazing stuff on the internet, 9 times out of 10 they are playing full-size instruments.
Some early Valco instruments continued to make it into the marketing pipeline – early on, at least. Probably as a sign of the increasing difficulty in getting product, the Spring/Summer 1942 Sears catalog sported a full complement of Supro guitars, essentially the ’41 line, all labeled with the newly-chosen Sears brand name, Silvertone. Shown in the ’42 Sears catalog were the Supro Capitan and Supro Rio, now renamed the Silvertone Crest (carved torch logo) and Silvertone Spanish (no logo), respectively. The Capitan had a standard trapeze tailpiece rather than the Dobro variety, with permanent cord coming out of the top of the lower bout!

By far the most convenient way to DI guitar is to use a digital preamplifier that combines amp modelling, speaker modelling and effects all in one unit. More flexible still is something like a Roland VG88. This requires the guitar to be fitted with a GK2 compatible hex pickup, but in return enables the system to model pickups and guitars as well as the rest of the signal chain. All these modelling systems sound different to each other and many guitarists say they don't 'feel' the same to play as going via a real amplifier, but, in many situations, the sound you record using them is very much like the sound you hear on records. As you hear exactly the sound you're recording over the monitors while you're playing, you know just how the end result will turn out, so there's little to be said about working this way other than to rely on your ears. Nevertheless, it is worth pointing out that some of the more unlikely combinations of amplifier models and speaker cabinet models can produce unexpectedly interesting results, so don't just rely on the factory patches, most of which I've found not to do justice to the products anyway. The morphing feature used in the Digitech Genesis 3 processor is also very creative, as it allows you to combine the characteristics of two completely different amp/speaker models, sometimes with surprising results.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"delay & reverb effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}
While there is absolutely no reason to go with "standard" if that's not what you prefer for a given instrument, I think it's safe to say that 10s (usually 10-46) are standard, since nearly every string manufacturer that uses such descriptors for their electric sets refers to their 10s as "regular." Ernie Ball Regular SLinky? 10-46. Fender Regular Whatevers? 10-46. D'addario Regular Light (note that there is no other, more REGULAR sounding name)? 10-46. Dean Markley Regular Blue Steels? 10-46...
Granite, when quarried in its natural state, also has a crystalline atomic structure which is ideal for sonic transference and has a compression strength of 19,000 psi, and a tension strength of 700 psi—the material these blocks are made of is the fourth densest on earth next to Diamond, Carbon and Quartz that has ideal resonant qualities which will decrease signal loss from your guitar to your amplifier by at least 30%. Utilizing this optimum material allows you to achieve maximum attack, clarity, sustain, note articulation, note separation, harmonics and punch. While the lows get tight and articulate, the harmonics scream effortlessly! Palm mutes, tapping, sweeps, you name it, all sounds so much better.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: sx","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"sx","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
Because any acoustic guitar can be made into an acoustic-electric, from what I’ve seen — and this is simply an observation, not a blanket statement — most of these sacrifice both quality of guitar and quality of pickup to sell affordable instruments in the name of convenience. So for the introductory acoustic player, here is my advice: Skip the acoustic-electric section and find a plain ol’ acoustic guitar that you like. When the time is right, plenty of companies make a variety of pickups designed for acoustic guitars, which will give you more options when selecting a method of amplifying your acoustic.
Tremolo is a regular and repetitive variation in gain for the duration of a single note, which works like an auto-volume knob; this results in a swelling or fluttering sound. This effect is very popular in psychedelic and trip-hop music. The speed and depth of the flutter are usually user-controlled.This is a volume-related effects pedal. This effect is based on one of the earliest effects that were built into guitar amplifiers. Examples include:
Another popular value pack comes courtesy of one of the greatest rock'n'roll guitarists of all time. For those who have an appetite for destruction, look no further than the Slash AFD Les Paul Guitar Outfit. Endorsed by the Guns N' Roses shredder himself, this pack comes with the killer AFD Special-II guitar that's equipped with new Ceramic Plus humbucking pickups, and a built-in Shadow pickup ring E-tuner. Additionally, this pack also contains a custom gig bag with the Slash "Snakepit" logo, Slash signature Dunlop Tortex picks, and much more.
Although most acoustic guitars have steel strings, classical and flamenco guitars use nylon strings. Nylon strings produce a mellower, softer sound. It is a common misconception that a new guitar player should start with nylon strings because they are easier on fingers or easier to play. Nylon strings and steel strings are not interchangeable on the same guitar, so it’s not a matter of progressing from one kind of string to another with experience. What should really drive your decision is what kind of music you want to play.
Plug an electric guitar into the input. Adjust the input drive level as high as it will go without causing the input clipping light to activate. Adjust the drive level control to a level below where the drive clipping light activates. Different reverb sounds can be achieved by lowering and raising the reverb drive level. Adjust the reverb level for a nice sounding balance between the dry and reverb sounds. Adjust the output level for the optimum volume level. Now go play some surf music.
Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.
The irony with guitars is that an original 1950s Gibson, for example, whilst capable of producing the most amazing sounds, and playing like butter - may not stay in tune, or intonate quite as well as a modern day equivalent. Consequently old guitars have very often been 'upgraded', with original parts lost. But this can seriously down-grade their value. Replacing missing parts with original or period-correct ones can very much improve a guitars collectability, saleability and therefore value.
Once you have the essential elements in place-a great amp, guitar, and guitarist-you almost can't help but get a great guitar tone. Crank the amp up to the appropriate level and begin with some mic comparisons. It's especially telling to audition different types of mics: for example, dynamics, ribbons, and large-diaphragm condensers. (I rarely use small-diaphragm condensers for miking guitar amps; on the other hand, I've found that almost any microphone will strike gold once you find the right spot for it.)
One of the key features that makes this stand out is the 7-inch high-resolution touch display which allows you to move amps, effects and set up your pedal board to exactly how you want it, sculpting the chain to your exact specifications. Want to run a reverb pedal before a distortion? Well, just move it around using the touch screen! The OLED scribble-strip and assignable colour LEDs appear above the switches and allow you to keep track of where your effects are – a great idea!
{ "thumbImageID": "PR-150-Acoustic-Guitar-Natural/512457000010000", "defaultDisplayName": "Epiphone PR-150 Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51273888006818", "price": "139.99", "regularPrice": "174.99", "msrpPrice": "269.99", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-150-Acoustic-Guitar-Natural-1273888006818.gc", "skuImageId": "PR-150-Acoustic-Guitar-Natural/512457000010000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/PR-150-Acoustic-Guitar-Natural/512457000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51273888007092", "price": "139.99", "regularPrice": "174.99", "msrpPrice": "269.99", "priceVisibility": "1", "skuUrl": "/Epiphone/PR-150-Acoustic-Guitar-Vintage-Sunburst-1273888007092.gc", "skuImageId": "PR-150-Acoustic-Guitar-Vintage-Sunburst/512457000015000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/PR-150-Acoustic-Guitar-Vintage-Sunburst/512457000015000-00-60x60.jpg", "imgAlt": "" } ] }
Even though the Orange Amps were still neither of the Top of of all lists because the Fender and the Marshall are amongst well known amplifiers for its individual claims in both patent and innovated in each technologies, (Fender corporation claims its first solid body elecric guitar to been market in mass productions and patents, whilst the other one Marshall claims either in terms truest guitar amplifications that also in mass production, so on Marshall claims a patent innovation itself and both of them were been a major direct suppliers on every famous music artists in every decades of music revolutions, on the other hands, the top spots of their hardship innovations were be at their hands, until to theIR last steps of their innovations, let the famous artists decide their demand at their hands whilst on the other side, Orange produces amps with considering a reasonable market on its considerably fine quality products because, the top spots were be still at working, and it means, ...more
Many guitars (even new guitars) need the frets leveled in order to play buzz-free with low action. Most electric guitars with bolt-on necks come from the factory with high tongue frets. Doing great fret work is a learned art, and I guarantee that you will be happy with mine. All my fret work jobs are performed with the guitar mounted in a neck jig that simulates string tension. This allows very accurate work. Re-fret jobs include leveling the fretboard if needed.
{ "thumbImageID": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "defaultDisplayName": "Yamaha GigMaker Acoustic Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115034173", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Natural-1274115034173.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GigMaker-Acoustic-Guitar-Pack-Natural/519040000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tobacco Brown Sunburst", "sku": "sku:site51274115034083", "price": "169.99", "regularPrice": "169.99", "msrpPrice": "285.00", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst-1274115034083.gc", "skuImageId": "GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst/519040000337000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GigMaker-Acoustic-Guitar-Pack-Tobacco-Brown-Sunburst/519040000337000-00-60x60.jpg", "imgAlt": "" } ] }
You think those guys are good? They are, but you should hear my uncle- Chris Lambert- and my cousin -Brent Lambert-. My uncle works at the Shadow Box in Columbus (or is it Cincinnati?) Ohio. He plays in a whole bunch of the music shows as a guitarist, and he rocks. Sometimes my cousin works there, too. Brent is just as good as my uncle, and they're both as good as the people you put on here.

Compressors are available as footpedal controls and can be used as an effect on electric guitar signals, for example. They can be used to obtain greater sustain for a string by setting the gain high and allowing the compressor to keep the output signal at a more-or-less constant level until the natural sustain of the string drops the signal below a certain threshold.
From the low-string riff for “What Difference Does It Make?” to the deep tremolo textures and swooning string bends of “How Soon Is Now,” Marr always seemed to have the notes and the tone to suit the moment perfectly. Marr’s work has been profoundly influential to guitarists of the Nineties and beyond. Noel Gallagher of Oasis dubbed Marr “a fucking wizard,” and Radiohead guitarist Ed O’Brien has cited Marr as the reason he picked up a guitar. In essence, Marr is a classicist, drawing much of his approach from the guitar sounds of the Sixties British Invasion, yet deftly adapting those influences to rock and roll modernity.

Good questions. Firstly, swapping the saddle around has the effect of moving the tapered top edge of the saddle closer to, or farther from (depending on which way it was to start with) the front of the bridge. If you're wanting the string to be as long as possible, for example, you'd need to make sure the saddle is oriented in such a way that the tapered edge is at the tail end (farther from the pickups). If you look at my pictures above, you'll see that my D-string saddle is originally oriented in this way, but in my case I need to SHORTEN the string, so I rotate it and this gives me more forward adjustment. Since you need to do the opposite of me, you'd therefore need to make sure your saddle has the same orientation as what mine had BEFORE I changed it. I really hope that makes sense.
However, 50 x does not mean that the two pickups wired in parallel are only half as loud as a single pickup, nor does 200 x mean that the two pickups wired in series are twice as loud as one pickup. Our human hearing does not work this way. Why that’s the case is beyond the scope of this column, but for our guitar-wiring purposes, it’s enough to know that the human ear doesn’t operate in a linear way.
The most common way that bass players connect their instrument to their bass amp is by using a 1/4" patch cord, a standard signal cable used in music and audio applications. Some bassists plug their bass into a small wireless transmitter about the size of a pack of cards, which can be clipped to the strap or to their belt. The transmitter transmits the bass signal to a receiver that is plugged into the amp. Bassists playing in large venues with complex stage set-ups, or a stage design where there is a large distance between performers, or players who like to dance or go out into the audience during the performance, may use wireless transmitters to avoid the risk of having their cable become disconnected while they move about on stage and give themselves more freedom. Another reason that some bassists use wireless transmitters is if their stage setup requires a long cable run between their bass and their amp. Long cable runs can weaken the strength of the signal and can adversely affect tone and sound quality.
There are two types of acoustic guitar namely the steel-string acoustic guitar and the classical guitar. Steel-string acoustic guitars produce a metallic sound that is a distinctive component of a wide range of popular genres. Steel-string acoustic guitars are sometimes referred to as flat tops. The word top refers to the face or front of the guitar which is called the table. Classical guitars have a wider neck than steel-string guitars and are strung with nylon strings. They are primarily associated with the playing of the solo classical guitar repertoire. Classical guitars are sometimes referred to as Spanish guitars in recognition of their country of origin.

In other words, it will slather the tone with raw dirt without affecting the core of the signal. A lot of people mistake fuzz pedals for distortions due to their more aggressive nature, but these beasts of old are definitely unique. One of the best examples of what a fuzz box sounds like is the Electro-Harmonix Big Muff Pi – a fuzz pedal whose circuitry gave birth to countless other models.


• How fanned frets work: You’ve likely seen players like the jazz virtuoso Charlie Hunter picking instruments that have frets fanned out at an angle along the fingerboard. The aim of fanned fret placement is to give the lower strings more length and the higher strings less length, thereby providing more accurate tuning and deep bass sounds. Fanned frets may seem like an innovation, but they first appeared in the 16th century.


FRET LEVELING ("Filing", "Dressing"...) $150.00 Worn or uneven frets can he filed level in many cases, if there will remain enough height on the fret to suit the customer (and practical playability). Frets must be lowered to the height of the lowest pit that can be found. Sometimes, replacing the most worn frets is appropriate. Includes "set up" adjustments.
20 pages, black and white with color front cover. In the middle of 1981, Rosetti took over distribution of the Gibson line in the UK. Rosetti were a very big name in Britain, having distributed Epiphone since at least 1963, as well as Hagstrom and others. This catalogue was produced at the tail end of 1981, and introduces a number of models to the UK, such as the MV-II, MV-X guitars and the Victory basses, the GGC-700 and the Flying V bass. Some of these models were so short-lived that they were actually never included in US brochures. The cover image (reproduced in part here) showed some of the earliest demonstration models, including a Victory with a highly unusual white scratchplate.
@Ricardo – I recommend placing tuners as close to your original signal as possible at the beginning of your signal chain. An EQ pedal can be placed where you would like to filter your signal to the settings of the EQ which is technically at any point in your signal chain. Try the EQ in different locations and use the setting that works best for your.
7) Yamaha quality can't be beat. I just returned from my friend's house and noticed his $1,000 Martin box splitting because of the dry Las Vegas climate. And, no I'm not a believer in guitar humidifiers because I believe a guitar should be made for the real world and not so delicate that it needs a humidifier. My friend and fellow old-time musician who has been working at Guitar Center here in Vegas for many years has seen them all come back over time because of splitting or warping except one brand that is... You guessed it, Yamaha! The reason you find them back ordered from time to time is because Yamaha actually gives their wood time to cure properly unlike other manufacturers who tend to rush their products out the door. And, this guitar is for my kid and for travel which means it needs to be exceptionally tough and well-made:)
There’s another wrinkle: vintage-style pickup magnets can weaken over time, resulting in a softer, smoother tone. Some pickups are designed to mimic this ageing process. Say you were looking for a vintage P.A.F.-style humbucker: You could choose between one of our models that that sounds like a pickup straight off the late-’50s production line (the Seth Lover humbucker), and another that mimics a similar pickup as it would sound and look today after decades of wear and tear (the Antiquity humbucker).
Also in 1952, Kay introduced the matching K-162 "Electronic" Bass, which was the first commercially available thinline-hollowbody electric bass guitar, and the second production electric bass guitar after the Fender Precision Bass debuted in 1951. Due to the use of K-162 by a bassist of Howlin' Wolf, Andrew "Blueblood" McMahon, it is commonly known as the "Howlin Wolf" bass. These instruments[clarification needed] are believed to be the first semi-hollow electrics[citation needed] (i.e., thinline-hollowbody electric with solid center-block), predating the Gibson ES-335 by six years. Their unique design[clarification needed] featured a flat top with no f-holes, a free-floating arched back, and two braces running along the top. The result was a semi-acoustic instrument that was feedback-resistant while retaining natural acoustic resonances. In 1954, Kay added the K-160 bass to its catalog with baritone tuning, according to the catalog,[citation needed] "tuned like the first four guitar strings but one octave lower." Structurally this bass was basically same as K-162 bass, except for the higher pitched tuning and the addition of a white pickguard.

I’m super excited for this post as it’s the culmination of some of the biggest names in online guitar lesson providers coming together to offer their advice and insights on guitar chords. Understanding the right way to play guitar chords is one of the first things you’ll learn as a beginner guitar player. It can also be quite frustrating when you are just starting out.That’s why I decided it would be a great idea to get a bunch of experts together all giving their insight into learning more about the wonderful world of guitar chords. I basically asked everyone two questions:
Almost all bass amplifiers are designed for use with an electric bass, which has magnetic pickups. When a double bass player is plugging their instrument into a typical bass amp, the signal usually comes from a piezoelectric pickup mounted on the bridge or beneath the feet of the bridge. The direct signal from a piezoelectric pickup does not usually sound good when it is plugged into a standard electric bass amp. Many upright bass players who use piezoelectric pickups use a preamplifier or preamp-equipped DI box before the signal is sent to the bass amp. The preamplifier helps to ensure that the impedance of the pickup signal matches the impedance of the amplifier, which improves the tone. Some preamplifiers also have equalizers which can be used to modify the tone.

Staggered brass saddles offer individual string intonation never before available in a design of this type, still widely regarded as the tone machine. The baseplate itself is a faithful reproduction of the original, made from steel, very important in a bridge of this style due to the tonal effect it has on the magnetic field of the pickup mounted in it.


Flanging is the strongest of the standard modulation effects. The feedback control increases the depth of the 'comb filtering' produced when a delayed signal is added back to itself. Because it is such a distinctive effect, it is best used sparingly, though it can also be used to process a reverb send to add a more subtle complexity to the reverbed sound.

As similar as the two instruments are, bass guitars have enough differences from electric guitars that bassists should definitely look for effects designed specifically for their instrument. By doing that, you’re getting a pedal balanced for the low-frequency dynamics of the bass, and built to help it blend better with the other instruments in the band. Many bass effects have the same purposes as guitar effects described above, including chorus, reverb, delay, phaser and tremolo.


The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
I'm going to assume that if you're reading this, you've probably been to two dozen guitar sites, all with varying, if not conflicting information on the correct way to do a setup. I've been there too, I've watched guys on youtube filing down frets with a dremel tool. Now it didn't look right to me, but maybe it works for him. The reality is there is more than one way to do something, and that's OK. If the end result is a great sounding instrument, it doesn't matter how you got there. So I'm going to show you my way of how to get to a great sounding electric guitar. And if you should choose to do something differently, and it works, great!!. Part of having some fun in life is experimenting, I encourage it.
We took another detailed look at all acoustic-electric guitars priced under $500 available from major American online retailers, and for this update, we shortlisted 78 of them for closer analysis. We then collated over 7700 ratings and reviews from forums, videos, retailers, blogs and major music gear publications and processed those data with the Gearank Algorithm to produce a Gearank score of out 100 for each guitar. Finally we selected the highest rated guitars in two of the most popular price brackets, sub $300 and sub $500. For more information about this process see How Gearank Works.

You probably won’t have to do this, but if you do, here’s how to go about it: First, slacken the affected strings and move them to the sides of the saddles. Then take some needle-nose pliers and remove one end of the retaining spring (different styles of bridge will use different types of retaining spring – sometimes there is an individual one for each saddle, in which case you might even need to remove the whole bridge to do this).


An instant classic, and an easy guitar song that offers a simple, repeated section of just a handful of dyads, or two-note chords. It is one of the most recognizable guitar riffs of all time and it’s great for beginners to learn. The entire section is played with just two notes per chord, and it’s a progression that keeps your fretting hand in just a single section of the neck. Once you learn this riff, it’ll be tough to stop, since it sounds so good, and it’s easy to play. 
In the first part of this two-part article, we look at the original five-way switch and find it lacking for some uses. The 2-pole super-switch steps in to help, and we look at how we would go about wiring a Strat in the standard way using that switch. Once we’ve understood that, we go on to create an interesting alternate wiring scheme for a Strat that wouldn’t be possible with the standard 5-way.
Flanger – a time-based effect likened to the sound of an aeroplane taking off and landing. The “whooshing”effect is created by feeding the output of the guitar tone back in on itself with a very short delay (usually less than 20 milliseconds) causing comb filtering (boosts and cuts along the frequency range). The delay time is then varied which causes the comb filter to move up and down the frequency range.

There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.
Ibanez brand guitars are manufactured at a variety of factories in several countries under contract from the brand's owner, Hoshino Gakki Group. The catalogs scanned and linked below represent output from the year 1971 through the present. During the 1970's and most of the 1980's, Ibanez guitars were made almost exclusively in Japan, and the majority of electric models were made at the Fujigen Gakki manufacturing plant.
Enter the polyesters and the polyurethanes. These plastics can be made into synthetic resins which harden after application the guitar body, making them more durable than nitrocellulose finishes. In some cases, UV light can be used to initiate the curing process of the resin, making the finishing process much quicker than the application of nitrocellulose lacquer.
 Great, low priced, vintage Japanese project guitar. May be Decca, Teisco or similar. Has "P90" style, Japanese pickup installed which is not original to the guitar. Solid Mahogany body and neck with Brazilian rosewood fingerboard. Body is perfectly flat and is a thin 1.25" thick. Back of neck profile is very "flat". Top of original bridge is missing and has a wooden one laying in it's place. The pickup is wired directly to the output jack as there are no pots. 3 of the original tuning machines have had their gears changed. All work fine. The headstock logo is missing. We have no additional parts with this one, nor a case or gig bag. Guitar as photo'd only. Would make a great vintage, Japanese, project / player guitar.
Nice-4-Bass-V1.5 This is an sf2 simplified version of three different basses - all with 4 velocity layers.  It includes the 1958 Otto Rubner double bass played and mapped by Drogomir Smolken, recorded by Ludwik Zamenhof. The samples are exceptional and some percussive effects have been mapped to some high notes. Royalty-free for all commercial and non-commercial use. Copyright 2016 Karoryfer Lecolds (Karoryfer Samples). The original Meatbass sfz version for Sforzando has round-robin sampling and includes arco as well as pizzicato presets.  (http://www.karoryfer.com/karoryfer-samples).
I was paging through my daughter's Rolling Stone Magazine today and saw a small article with three different artists that use Harmony Guitars and they were singing their praises. I'm an old dude (or shall we say vintage)who's not familiar with all of the new bands popping up today, so I can't even tell you who these artists are. However, I did find it interesting that Rolling Stone did a spot on these guitars. I was too young to get my hands on many Harmonies when I was a kid, so I can't comment on their quality, but I know they were budget guitars and weren't considered anything special back then.

Valco manufactured Spanish acoustic guitars, metal-bodied resonator guitars, electric lap steel guitars, and vacuum tube amplifiers under a variety of brand names including Supro, Airline, Oahu, and National. They also made amplifiers under contract for several other companies such as Gretsch, Harmony, and Kay. In the 1950s they began producing solid body electric guitars.
As you can see, this is simply a case where the Les Paul Custom is a feature-rich product, with more qualities that Epiphone can highlight as buying incentive. All the same contextual advice applies, as the LP Custom is every bit as versatile as the Standard (if not more) and can hang in just about any musical style. When deciding between them it's more a matter of price and aesthetics than any kind of style or playing scenario.
The brand’s biggest boom through the fifties and sixties was largely down to the birth of rock n’ roll. Thanks to their excellent hollow and semi-hollow models, Gretsch guitars were used by icons including Chuck Berry, Chet Atkins, Bo Diddley, and George Harrison. Since 2002 the production side of things has been run by Fender, although the Gretsch family still own the company.
In the eighties, the Sonic Youth leader emerged as indie ­rock's premier guitar radical, mixing strange drone tunings, jamming screwdrivers or drumsticks under his strings, and blasting out feedback-swirled punk jams. Thurston Moore influenced a generation of noise­heads, from grunge rockers to shoegazers. Neil Young once said that if Sonic Youth wanted to record with him, "Hell, I'd be there."
Engl is not particularly famous among US guitarists, and even veterans in the field might be unfamiliar with this hard-to-pronounce name. A good shorthand to give you an idea of what they’re about is to make a mental list of the features most readily associated with German products: good manufacturing quality, reliability, an adequate level of innovation (but only when needed) and higher than average performance.
Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used.

The 2019 Gibson Les Paul Standard sports a mahogany back with an artisan-grade AAA figured maple top and a mahogany neck with Ultra-Modern weight relief. This chambering technique is provides a solid core through the center of the guitar, retaining the classic Les Paul sound and making the guitar less prone to feedback. The Ultra Modern weight-relieved body also makes playing long sets a breeze. The neck has an asymmetrical Slim Taper neck profile for increased playability and comfort.
The Fender CC-60SCE acoustic-electric guitar combines the powerful onboard electronics with classic Fender tone and the comfort of their longstanding craftsmanship. The smaller concert body features a solid spruce top, mahogany back and sides, and "Easy-To-Play" neck, making it a perfect choice for beginning to intermediate level players looking to take the next step in their music. 

Great article and very enlightening comments too. One thing I’d like to add is that it seems to me that a considerably large expense is necessarily involved in going the ampless route i.e. Axe FX + midi controller at the least, in an Axe Fx setup. Granted, amp setups can be just as expensive or more expensive, but cheaper amp options are available.


Funny, the Dorado was manufactured in Japan during the 70's and the Japanese factory worker must have arbitrarily placed a model number when he or she felt like it. However, it seems that Serial Numbers (presumably in proper sequence) were always assigned and hand written with a black ink pen. My example, while space is present, is void of any model number.
Taylor does produce a more budget friendly line of instruments with the 200 series, which is ideal for beginners looking to capture their famous sound at a fraction of the price. Taylor also produces small bodied guitars such as the Baby, Big Baby and GS Mini, which rival their full bodied instruments at a lessened price and are perfect for kids and beginners to learn on (6).

The American David Schecter founded his company in 1976 in order to produce spare parts for guitars already available (especially Fender and Gibson). But since 1979 the brand has been manufacturing its own guitars. In the beginning they had only Fender-based models but nowadays, Schecter guitars are clearly conceived for hairy players (but not exclusively), with models like the Hellraiser or the Damien. Among their most famous users are Billy Corgan, Eddie Vedder, Pete Townshend, Mark Knopfler, Matthew Bellamy... And the brand also presented its first amps at the latest NAMM show.

INSTALL "UNDER SADDLE" PICK UP - $100.00 and up. Expand endpin hole to accommodate jack. Wire pickup to pre-amp and jack. Fit and re-size old saddle for proper action and contact with pickup. May require new saddle and re-rout of saddle slot(additional). There are other variables relating to pre-amps which must be individually quoted. Condition of bridge and neck angle may be factors in the appropriateness of an under the saddle pickup.
I figured it was a bad choice of pickups and eventually, with great anticipation, purchased a set of P-Rails after hearing the great demos of them on youtube. I am a pragmatic engineer and used to believe that the tone of an electric guitar MOSTLY came from the pickups. How WRONG was I. The P-Rails sound just as muddy as the JB and M22V (in fact, the M22V should be really bright because it's a lower winding count an lower DC resistance p'up).
© Frank Meyers and Drowning in Guitars, 2012-2017. Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Frank Meyers and Drowning in Guitars with appropriate and specific direction to the original content.
Covers all the material needed for the RGT Grade One electric guitar examination, enabling you to gain an internationally recognised qualification. The book should help you to develop all aspects of guitar playing, increase your knowledge of specialist electric guitar techniques, understand the music theory that relates to electric guitar playing and achieve your full potential as a guitarist.
The Ampeg Bassamp Company, founded in 1949 by Everett Hull, responded to the growing demand for electric bass equipment by producing a line of bass amplifiers. Ampeg bass amps were widely used by electric bass guitarists in the 1950s and 1960s. The first bass amplifier offered by Ampeg was an 18-watt model with a single 12" speaker and a rear ventilation port called the Super 800. In 1951, they introduced a 20-watt version with a 15-inch speaker. In 1960, they introduced the B-15 Portaflex, a flip-top 25-watt tube bass amplifier with a single 15" speaker. While the Ampeg Portaflex had a pleasing bass tone, and was used by studio bassists such as James Jamerson and Carol Kaye, it was not powerful enough to be used in a stadium or arena concert.[3]
Versatile- many of the practice amps today have “AUX” (Auxiliary) inputs for your electronic music devices like your iPod, phone, or tablet computer. This is essential for learning songs because you can pipe your song from your device into your practice amp and play along either out loud or with your headphones in private. With so many music apps out today for iPhones and Android devices, you can also connect the headphone jack of your practice amp to your personal device to learn new songs and/or record your performance! Check out Ultimate Guitar Web on Google Chrome
Classic 000 Martin copy by the great Yamaha Nippon Gakki factory in Japan, Here is a fine example , no structural issues no cracks and neck is excellent and plays with ease because it has great action, intonation is 100%, beautiful patina of a true vintage 40+ year old with great workmanship and materials this example has stood the test of time like few have its not new or mint of course it has been played but not abused and taken care of and maintained and sounds better than new with its well aged TONE WOODS these are 40+ years old but when made the woods were known to have been aged over 20 years then so this doesn't compare to a new Yamaha all of those factors make this a rare survivor. Fun to play because it sounds so good and is easy to play. Pics soon to come. Questions for Joe or ready to buy email me at: jvguitars@gmail.com .
Volume pots are wired as simple voltage dividers. Higher settings have higher resistance to ground and lower series resistance, so more signal passes through. When maxed, volume pot has zero series resistance and full pot resistance to ground. Signal takes the path of least resistance and most of it will go though. However, some signal, mostly treble will be lost. With low pot values (250K) it will be more noticeable than with higher (500K and 1M) pots. That’s why typical pot values for brighter single coil pickups is 250K and for warmer humbuckers 500K or sometimes even 1M.
Playing the guitar is no joke. To be honest, not all who bought a guitar end up playing. Maybe it’s just hype from friends and family or along the way found something else more interested on. You have to remember that you will spend countless hours practicing and the time you spent to it is impossible for you to get it back. This is not meant to discourage but to challenge you to succeed.
Once again a British company. It isn't hard for this brand to attract attention thanks to the (would you believe it?!) orange color that envelops most of their products. The first models saw the light of day in the late 1960's with the OR series. Its first renowned users were Fleetwood Mac and later Jimmy Page... The crunch sound and the mid-frequency range are the brand's main attributes. Orange even managed to outclass Marshall in the 1970's thanks to its prestigious endorsers. In the 90's, Noel Gallagher from Oasis was the best-known Orange fan and he even collaborated in the development of the OTR head. At the start of 2011, the brand surprised everyone and launched the OPC, a workstation for musicians — actually a PC and a guitar amp in a single unit.
The Fender Hot Rod Pro Junior III is a good example of what the older style beginner amps used to entail. The initial price tag is much higher than the typical beginner amps popular today, but it is also a better made, better sounding tube amp. The Hot Rod Pro Junior III can be cheaper in the long run for guitarists that want to eventually do professional work. Most beginner amps are not powerful enough or sound good enough to quite cut it as a professional amp. The Hot Rod Pro Junior III is a simple amp that provides the bare essentials to get a professional level sound. Going the Hot Rod Pro Junior III route is a bit less conventional for beginners, but it is a solid option to consider if plans of recording or playing live lay in the future.
I ordered this item from their ebay store, roughly the same price with shipping, very easy to read point to point instructions, this was my first diy pedal, I've fooled around with a soldering iron but not enough to speak of. I bought it because I was not pleased with my Peavey Valveking 112's boost sound, it not only boosts the signal, it changes the tone, from the reviews I watched on youtube, it sounded like this pedal would do the trick, for the price, and the fun of a first time build, I love it, it boosts the signal with no change in tone, I'm not super impressed with the pedal's distortion tone, but I am spoiled with that saturated tube tone, there is some extra hum when I turn on the pedal, I don't know if this is my fault from the build, or what, but I would ... full review

 The type of guitar strings you choose, and how often you change them will not only dramatically affect your tone, but also impact the playability of your guitar. By learning about the different string options available for your guitar, you can find the strings which strike the best balance between great tone and playability. The key components affecting tone and playability come from string gauge, string winding method and the string construction material.
That’s not an overstatement, as traces of T-Bone’s influence can be heard in the early recordings of Albert, B.B. and Freddie King, Muddy Waters, and especially Chuck Berry, who adopted many of Walker’s signature licks as his own. A sharp-dressed, flamboyant performer who played the guitar behind his head and did the splits without missing a note, Walker helped reposition the guitar player from the sidelines to center stage, inspiring Buddy Guy, Jimi Hendrix and Stevie Ray Vaughan to copy his impossible-to-ignore moves.
For the guitarist who's frequently on the road or often plays out, the pedalboard is an indispensable aid. Many pedalboards include custom-fitted travel cases or gig bags. With your effects already mounted on the pedalboard, performance setups are fast: just unpack the already-configured board, plug in your guitar and amplifier, and you're ready to play.

Electronics installs are one of my favorite jobs here at the shop and this project was one of the funnest.  Installing a Clapton pre-amp is more then just a quick wiring job because of the surface mount board.  The board needs to be routed into the body underneath the pickguard.  Setting up the router is the most time consuming part of this job and once the routing in complete the actual wiring takes only a few minutes.  The guitar was then topped off with a fret level and setup. -Evan
CF Martin & Company was established by Christian Fredrick Martin in 1833, is an American guitar manufacturer. It is highly regarded for its guitars with steel strings. Martin Company is a leading manufacturer of flat top guitars that produce top quality sound. They fabricate classic and retro styles of guitars with varied body type and sizes available in 12, 14, and 15-string styled guitars. Top quality tonewood is used after testing the sounds and vibrations produced within a pattern of a time frame. Choose the strings based on the genre of music and style you will play this guitar. The starting price of an acoustic Martin guitar is 23,000 INR approximately.

While the bulk of new players will likely want an amplifier for their electric guitars, acoustic-driven music is still plenty popular amongst players of all skills. And while acoustics are fairly loud on their own, some players still want to pump up the volume from time to time, as well as shape their sound. And you can do all that without sacrificing the warmth of your guitar’s sound with the Behringer Ultracoustic AT108. Perfect for home practices and coffee shop performances, this amp was specifically designed to enhance the volume and tones of an acoustic guitar (or, more accurately, an acoustic-electric). It also has a secondary microphone input to amplify your voice alongside your guitar.


Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.
×