If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.
But opposites not only attract—sometimes they also make groundbreaking music together. This is certainly true of Zoom’s collaboration with Doe and Cervenka. Since that band broke up, Zoom has gone on to do session work with everyone from the late John Denver to the Raconteurs. He’s also become semi-legendary as a guitar amp hotrod guru, having tweaked circuitry for Jackson Browne, the Black Crowes, Los Lobos, L7 and Social Distortion, among many others.
This depends on a number of things. Are you looking for placement in a series of pedals? If so, it should go towards the end of your chain. Are you looking at it as a functional point? If so, using an octave lower can give some hugeness to heavy guitar or might pull a fatter sound out of some higher solos, whereas an octave up is almost always great for a layering effect.

Of course, as guitar players we still want to remain open to a number of tonal aspects that happen after the front end of the initial attack. These elements aren’t necessarily in the front part of the very beginning of a guitar tone, nor are they delegated to the trail of lingering sustain. “The reason why people sound a certain way is because of little nuances, those little pull offs, those hammer ons, those plucking [dynamics]— the sequence of those things. Think of it as a sonic palette. That sequence is what makes the artist sound like himself.”
1958-1969: replaces the "U" models and now has a double cutaway body with short horns. Masonite/poplar frame bodies, 13.25" wide. Models numbers include the "Standard": 3011 (black 1 pickup), 3012 (bronze 1 pickup), 3021 (black 2 pickup), 3022 (bronze 2 pickup), 5025 (blond 2 pickup). The 3021 is considered THE Jimmy Page model. "Seal" shaped pickguard and concentric knobs on 2 or 3 pickup models. Round control knobs.
But there are more questions – are you a beginner, or do you have 20 years playing experience under your belt? Are you on a tight budget, or is money no object? Do you prefer funk, or are you a full-on metalhead? Somewhere the perfect guitar is waiting for you, and – with hundreds of reviews on this site – chances are we have featured it on these pages!

Modulation stompboxes like our BF-3 Flanger should be after the tone-producing effects like distortion, wah, etc. so they can process and modify the tone built by the pedals before it. If you put it before the distortion, then you are distorting the sound of the flanger. Maybe that’s what you’re after, but in general, put the BF-3 and other modulation effects after the tone-shaping (and noise–producing) pedals. And then there are the ambience effects: delay and reverb. As we discussed earlier, reverb—and sometimes delay, depending on the space—is the last thing that happens before the sound reaches your ears in a physical space, so these go last. Delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.

it is four solders on a guitar on say a les paul needs electricty so two wires pass the electricity through the other two wires are for your pickups the pickups electricity goes through the wires of them , into a potentiometer which is the technical name for the thing under the knob (or two depending on the guitars wiring) .... than into the 3 way and than finally passes out of the guitar and into an amp , pedal or tuner

All six strings are made from nylon, or nylon wrapped with metal, as opposed to the metal strings found on other acoustic guitars. Nylon strings also have a much lower tension than steel strings, as do the predecessors to nylon strings, gut strings (made from ox or sheep gut). The lower three strings ('bass strings') are wound with metal, commonly silver-plated copper.
I have a Dover, it was my great uncle’s guitar. It has seen better days but considering its age its in pretty good shape. Some one did some custom wiring inside so I had to replace the pots. One of the pickups was glued back together but it wasn’t done properly so now it doesn’t quite sit right. The plastic cracked at most of the corners where the screws hold the pick ups down.
If you want to take your tracks to the next level, a multi effects processor can do the trick. For a high-end example of what one of these units can do, check out the Eventide H8000FW 8-Channel Ultra-Harmonizer Effects Processor. It supports 24-bit audio and comes with an impressive 1,600 pre-set effects. Some are even pre-customized for 5.1 surround sound, so production for home theater playback is a cinch. Its smorgasbord of I/O options includes AES/EBU, ADAT, S/PDIF and FireWire with sampling up to 96kHz, so whatever you're looking to connect to the H8000FW, it's a safe bet that you can get the job done. Of course, not all of the processors here are quite as advanced. There are plenty of setups out there that just need a straightforward solution, and if that sounds like yours, don't worry: you'll find plenty of those here as well. Take the TC Electronic M350 Reverb and Effects Processor, for instance. This single-space rackmount is easy to fit into any budget, living up to TC's reputation of delivering amazing bang for your buck. It's loaded with 15 different effects plus 15 reverbs, and even includes control software for your AU/VST environment.
"Like any music technology, it's just a tool to help someone express their creativity. The gear never makes the player, but there's a purpose to it in certain playing situations and that's all good. As long as some guys are not hiding the truth of their playing behind it. A good player's a good player, and they usually sound good on an acoustic guitar simply because because they can actually play the damn thing.
Leo Fender didn’t know how to play guitar. The inventor of the famous guitar brand, which includes the Telecaster and Stratocaster models (favored by Kurt Cobain and Jimi Hendrix), never learned how to play his own instrument. Fender began as an accountant with a knack for repairing radios, later turning that hobby into a full-time electronics operation. The highly versatile Telecaster, which he developed in 1950, became the first mass-produced solid-body electric guitar.
Strumming Patterns: Not surprisingly, light distortion works great for strumming patterns, since it’s an effect without any timing or repeating issues.Chords: Depending on where the chords are being played, light distortion can work for swells and ringing chords.Short Arpeggios: This isn’t a place where you will hear a lot of distortion utilized. In some cases it can work, but it’s not a hallmark tactic.Quick Solos: If you’re dealing with a louder bridge solo, light distortion will often be coupled with another effect (delay, tremolo, chorus, etc.) to give it that extra boost.

Unlike Christian, however, Montgomery used his thumb instead of a pick to create the percussive-yet-warm tone associated with his style. (According to interviews, Wes learned to play with his thumb because it created a softer sound, appeasing his neighbors.) With his phenomenal ear, Wes quickly grew beyond his influences and developed a style all his own. His knack for melody, groundbreaking use of octaves in a soloing context and intricate chord solos—as demonstrated in his devastating interpretations of standards like “Round Midnight” and “Days of Wine and Roses”—broadened the range of guitar, pushing the instrument into unchartered territory.
The one-string guitar is also known as the Unitar. Although rare, the one-string guitar is sometimes heard, particularly in Delta blues, where improvised folk instruments were popular in the 1930s and 1940s. Eddie "One String" Jones had some regional success.[citation needed] Mississippi blues musician Lonnie Pitchford played a similar, homemade instrument. In a more contemporary style, Little Willie Joe, the inventor of the Unitar, had a rhythm and blues instrumental hit in the 1950s with "Twitchy", recorded with the Rene Hall Orchestra.

For players who want an incredible palette of tones for a low entry cost, this is the amp for you. Experiment with 128 tonal presets, or create your own sounds with digital models of over 200 amps, cabs and effects. If you’re into playing different styles of music and you don’t want to invest in different rigs, look to this versatile solid state amp first.

Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  1 Meg Ohm, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.
Last fall, Ubisoft released a new version. But Rocksmith 2014 is considered a replacement rather than an update: The company is trying to rebrand the franchise not as a game but as a teaching tool. The box bears a fat label proclaiming "The fastest way to learn guitar," and Ubisoft launched an ad campaign promising that Rocksmith 2014 could teach prospective shredders to play guitar or bass in just 60 days.

Iidi began manufacturing guitars in 1958 in Nagoya, Japan. Iida is still producing guitars, but mostly in their factory located in Korea. They were mainly responsible for producing acoustic and semi-acoustic rather than electric guitars for major manufacturers Ibanez and Yamaha. There is speculation that Iida may have assisted Moridara for a short period in making Morris badged guitars, but that is not verified.
I don't have enough good things to say about this shop. Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings? Well, this ain't that shop. James, the owner, is super helpful and knowledgeable, and stocks his shop with really top quality gear. I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection). That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well. They also do top-notch repair on equipment. I brought in my Princeton Reverb for a speaker swap, and the work was completely cheaply and flawlessly. They definitely have a loyal customer in me going forward!
The technique is often executed by the little finger of the guitarist which is wrapped around the volume pot of the guitar. When the note is struck the volume is increased from zero by a rolling motion of the little finger. Alternatively, the effect is achieved with a volume pedal. It is sometimes called "violining", because the sound is similar to a bowed violin. Allan Holdsworth pioneered the technique of the pedal swelling along with a delay unit to create a thicker sound that is more associated with the cello. - winner333
Unfortunately it’s during this critical time that a lot of people get discouraged and may even give up on playing altogether. The first 6 months of learning guitar are critical, statistics show that if someone can still be playing at 6 months they will be much more likely to go on to play guitar for life, so the first 6 months are actually the most important time.
Spruce has historically been the wood of choice for acoustic flat-top guitar soundboards. However, Luthiers and other large guitar manufacturers very often choose more economical and readily available woods rather than top-quality spruce. Redwoods and cedar, for instance, are often used in soundboards by American guitar-makers to great effect. In some cases, two different woods are used together to give the guitar a distinctive appearance and tone.
Seeing one in the hands of Ed Sheeran was a huge shot in the arm for the small-body acoustic market, and now players are picking these up as good-quality, usable guitars which are equally at home in the living room as they are on the stage. The Martin LX1E is perhaps the best known and best respected small body acoustic, and can hold its own tonally against many of its regular-sized peers.
In the years following Electric Mud and Muddy's Death in 1983 from heart failure , the record itself started building a cult around it, comprised of acid rock fans, record collectors and curious people. By 1996, the resurgence of popularity in the record matched with its scarcity led it to being reissued in a deluxe edition by Chess with new line notes by Mark Humphrey and Marshall Chess. Despite all the bad press Electric Mud received, Marshall Chess never stopped claiming it was a brilliant, misunderstood record.
I’m starting at guitar too at sixty years old, my opinion is that it’s not the guitar, but the time put into practicing, you can dup any type of sound with the features from amps, and guitar processors. You can even make an electric guitar sound like an acoustic. I purchased a line 6 150 watt amp, and a processor from line six, and I can dup any type of guitar sound. I built my own guitar
Lastly, we have the M-100FM. This guitar features a body that is similar that Super Strat style Ibanez is known for, packed with a great set of pickups. This is a mid range guitar, but one that is very capable compared to its immediate competition. If you need an axe that looks good and plays good as well, ESP LTD M Series M-100FM is the ESP for you.

Let’s kick things off in style. This guitar is one of Epiphone’s mid range semi-hollow models. As such, it has to meet much more refined standards. Many wondered if Epiphone was capable of delivering such a guitar, but the answer is a strong yes. With its three Dogear Alnico pups, this thing is a beast. If you know how to handle a semi-hollow, you will find that Epiphone Riviera Custom P93 brings a lot of range. At least that’s the type of impression it left on me.
We’ve decided to give our top choice award to the Martin DRS2 dreadnought acoustic because it’s simply the best all round balance of quality, sound and price, and pretty much anyone reading this should be able to consider it as an option. The only reason you might not is if you’re dead set against a dreadnought body. Otherwise, it’s a fine choice to spend your money on.
6. Bugera V5 Infinium 5-watt 1x8 ($199.99): This little amp delivers pure all-tube tone at a fraction of the size of its larger counterparts. Bugera has utilized the Infinium Tube Life Multiplier technology to make sure your tubes stay healthy over the lifetime of the amp. If you want to get into the world of tube amplifiers but don’t care about a lot of bells and whistles, this little amp is a great option.
For 10" speakers, the most common combo amp and speaker cabinet configurations are 2x10" and 4x10". For speaker cabinets, 2x10" and 4x10" are the most widely used, although 8x10" cabinets are used in stadium concerts, especially in louder rock genres. Other configurations with 10" speakers do exist, but they are less common. For example, there are a small number of 1x10" and 3x10" combo amps and speaker cabinets, and a small number of 6x10" cabinets. Bass speakers are usually made with stiff paper cones. Hartke combo amps and speaker cabinets are unique in that the cone is made from paper, except for the middle, which is made of aluminium. Gallien-Krueger's MB210-II combo amp uses ceramic speakers.
This is one of the best guitars according to many guitarists and there are many reasons for that! It has a nice weight, not too heavy, not too light, and it’s comfortable to play. If you want to find a good guitar but don’t really know what to look for this is a safe choice, you will most likely love this guitar, especially if you like vintage-looking things! Go wireless on stage with this guitar, with one of these awesome wireless guitar systems.

You might initially think that Music Lab is narcissistic for creating a line of guitar VSTs with the word “real” in them. But after you hear the first note, you’ll be kicking yourself for doubting it. There is a lot to cover with the “Real” line, and since they share many of the same features, we will slowly go over the components of these VSTs throughout the reviews for them.  
“This is a very complicated mix of economy versus market, demand versus what products are they putting out, versus are their products as good as they used to be, versus what’s going on with the Internet, versus how are the big-box stores dealing with what’s going on,” Smith says. “But I’ll tell you this: You put a magic guitar in a case and ship it to a dealer, it will sell.”
In 1952, Alfred Dronge – co-owner of small New York City music shop Sagman & Dronge – registered the Guild Guitar Company. The following year, they began producing deep hollow body guitars, a reflection of Dronge’s love for jazz music. The brand grew steadily through to the 70s – when Alfred Dronge died unexpectedly in a plane crash – getting their instruments in the hands of musicians such as Buddy Guy, Muddy Waters, and Bonnie Raitt. In the 80s, Guild began producing signature guitars for musicians Hank Williams Jr. and Brian May of Queen. The brand moved around frequently and it wasn’t until 2014 that they settled in their present headquarters in Oxnard, California – where all of their line of USA made guitars are now produced. To this day, they still produce a wide variety of hollow, semi-hollow, and solid body guitars that look as beautiful as they sound.
Amazing unit! I loved using my POD XT Live for years and wanted to upgrade. This unit totally exceeded my expectations. Sounds amazing and it's incredibly flexible for routing processing and effects chains. They built the hardware better and it's got a better set of pedal buttons too. Absolutely recommend! (Plus, they announced at NAMM that there will be more model packs, so that's great too!)
Interesting cosmetics and great playing 4-string, Factory, but "custom re-built" Fretless bass. Appears to be re-finished. I had to buy this, as I recognized it immediately as a great "player", fretless bass. Adjustable P-J passive / dynamic pickup configuration sounds great. Separate volume and tone controls. Appears to be a "re-finish", in interesting "Fleck-Tone" gray paint. We think it is not the original finish, but it could be original. Someone did an incredible job it if is a re-fin, as the routed edges are perfectly finished and all parts had to have been removed with room made for the extra finish thickness. No worries about finger prints with this one. Un-bound, graphite? or other synthetic material, ebony black fingerboard  w/ dot inlay side markers on a solid mahogany neck with a 4-bolt neck joint. Black anodized tail piece perfect and rust-free. Finger board near new condition. Features 4 high quality, "sealed" tuning machines that work perfectly and hold tune. Plays and sounds great! Lots of fun. We have completely done a "Pro" set up on the guitar, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!). 34.5" scale length. Plays and sounds great. We also installed a new set of .040 "Round-wound" strings (yes I know flat wounds are more correct for fretless, but I prefer a bit more brightness. You are free to install flats once you own it). No case or bag included.
This is like an echo where the sound you play repeats either once or multiple times depending on how you set the pedal. At low repeat settings this fills up the sound which is useful if there aren’t many other musicians. With lots of repeats it sounds rhythmic and huge. This effect relies heavily on the speed of the repeats keeping time with the song tempo. With practice it’s easy to set correctly but get it wrong and it can sound like your chords are running away from you.
Get it tuned up and play it in the store. Some people may find this uncomfortable, being a newbie and all. If you don't want to play it, just start bending strings, up and down, using the whammy bar; think of it as 'guitar stretching'. Then see how well it stays in tune. If this guitar has no locking nuts on the head, and it still stays in tune, it's a winner. But if you have to re-tune more than a little, and almost all the strings, pass on it. You will grow frustrated by it very quickly.
Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.
The Univibe effect was produced to also mimic the sound of the Leslie rotary speaker, but in a slightly different way from the new digital pedals previously mentioned.  They often combine slight amounts of all modulation type effects at the same time to approximate the rotary sound, but became a unique sound of its own.  Some pedals allow some individual tweaking of each modulator, but most typically allow the user to adjust the speed of the Univibe effect.
My Carvin SH575 is a semi-hollow body electric. The size is similar to the Gibson 336, but sounds totally different. When you play this guitar you can't put it down, Carvins are made with computer aid wood carving CNC machines the proto-type of the guitar is measured with lasers and programed into the computer so every guitar they make is to the 1000th to the original. The finish and the detail is awesome. It also is wired with hum bucking pick-ups, piezo acoustic pick-up and Roland GK synth guitar. You can get some beautiful hybrid tones from this thing and I never can stop finding new ones. Try one of these out if you ever go to California I think there is like 5 stores around the L. A. / San Diego area, you will see what I mean.
Wet Set: If you have a sound that you want to push a long way back in the mix, it can often be better to make your reverb effect pre-fader, and temporarily remove all the dry sound. Then alter the sound's EQ and reverb settings while listening only to the wet reverb sound. Once you've got that sounding good, gradually fade the dry sound back in until you're happy with the wet/dry balance. This approach can often be more effective than simply whacking up the reverb level while you listen to the whole song. Martin Walker
700-Series, which are all solid-bodies are probably worth $250-$350, maybe a little more for the 4-pickup 742 model. I’m pretty sure that they were on the market at the same time as the 800s but not as many are being seen. Since the 800s were a step-up in quality compared to previous Kents and the 700s used similar design features, they should be pretty decent instruments. Although collectors haven't shown a lot of interest in them, rarity has to be considered an influence on the price at this point.Recently a 742 sold on Ebay for over $1000 and a 740 recently sold for $999. Previously most of the 700s had been selling for $200-400.
The more difficult nut to crack in emulating the full drive train of a modern guitar is the instrument itself. That breaks down into two categories -- acoustic and amplified. VSTs and the gear that emulate the performance logic and physics of a guitar can get close to an acceptable reproduction of acoustic instruments but that last mile will be a hard gap to close. That's because the resonate bodies of most instruments -- especially stringed instruments -- are shaped differently than speakers. The materials, the inertial matrix, they're just not the same. The resonance of a stringed instrument originates at a single point of impact with the string, much as a speaker's sound originates at a sort-of single magnetic point, but inertia carries the vibration of a bowed or plucked string through a 3D body to produce 3D acoustics that cannot be exactly matched with a forward facing speaker -- or by speakers facing front and back. Close, but no exact match. We might argue that speakers can render sounds closer than a human ear can detect, but nuanced vibrations picked up in the bones and fluids of the human body could arguably betray a difference.
In Chicago in the sixties, "the rules had been laid down" for young, white blues bands, Mike Bloomfield told Rolling Stone in 1968. "You had to be as good as Otis Rush." That wasn't easy. A Mississippi native who moved to the Windy City in the late Forties, Rush was a fearsome electric guitarist – with a grittytreble tone and lacerating attack, like a gunslinging cross of Muddy Waters and B.B. King – as well as a knockout songwriter. Along with guitarists like Magic Sam and Buddy Guy, Rush helped create the more modernized, R&B-influenced approach to Chicago blues that came to be known as the West Side Sound. Rush's impact on later generations was enormous: His late-Fifties and early-Sixties singles were go-to covers for Led Zeppelin ("I Can't Quit You Baby"), John Mayall ("All Your Love [I Miss Loving]") and the J. Geils Band ("Homework"), while Stevie Ray Vaughan named his band after Rush's lethal '58 lament "Double Trouble."
This is another best budget electric guitar from Epiphone. It is also a great choice for a beginner and it is quite lightweight to carry. For an inexpensive guitar, this one has a pretty good sound and tone. Despite being low priced, the manufacturer has not compromised in its quality. The cherry red color is really attractive and appealing and can help you to boost up your smart personality as a guitarist. This is closer in look to the iconic rock guitars.
CLEAR COATStew Mac sells nitrocellulose lacquer that works realy well for guitar finishing but if your like me you can't afford $10 a can for paint. Or you can check out reranchthough I haven't used any of their products they are a little cheaper. I use Deft spary lacquer. You can get it at Wal-Mart for under $5 a can and it works great. Use the same basic steps that you used when you sprayed you color coats, keeping in mind that you want enough coats so you don't cut through the clear top coat when wet sand and polish it out. Now comes the waiting. The paint has to set for several days to a month to let the solvents that are in the paint to rise to the top and harden. The paint will feel dry but you will notice that it might feel a little sticky or soft when you touch it. I like to do a "nail" test on mine. I use my finger nail and push it into the painted area in the neck pocket to see if it is still soft. No one will see the inside of the neck pocket so it's ok if you scratch it. Once it has cured completly you shouldn't be able dent the finish. It could take longer than a month for certain finishes to harden completely but trust me, you will be glad that you waited. For more information about all the different types of lacquer or clear coats products that are out there and how to choose what may be right for you, check out the drum foundry they have some great info.
Pitch Bend/Shifting: From a simple octave above the note you’re playing or at intervals in between, a pitch shifter effects pedal will change the pitch of your note or chord. More sophisticated pitch shifters create two or more harmony notes so you can accompany your root note for a fuller sound. Some simulate a chorus effect by providing minute shifts in pitch.
The smallest Taylor guitar available. The Baby Taylor series has been hailed for its easy-to-transport size and affordability. Features include sapele laminate back and sides with an optional Sitka spruce (identified as a BT1) or mahogany top (identified as a BT2). A larger bodied option is also available called the “Big Baby” (BBT introduced in 2002), which is a 15/16-size dreadnought with a neck that is standard scale (25-1/2”) and narrow width (1-11/16”). The Big Baby however only comes with a Sitka spruce top.
Guitar has a vicious tone, nice wood, great p[ickups. However the guitar I received has a problem with the volume control acting as a tone knob and also cuts out sometimes. The guitar chord had to be replaced because it was cheap and cut out like a bad phone chord. I have to take it in to a local guitar shop and have the volume control fixed. Not too expensive but some additional cost. I didn't want to send it back as I otherwise love the guitar and didn't want them to send me a different one rather than just repairing it. Plus I don't want to wait that long. But certainly a great guitar for the money. No question.
E-B-E-G#-B-E (use light gauge strings because three strings must be raised) Open E is used by: Brian Jones on "No Expectations", "I Wanna Be Your Man"; Keith Richards on "Salt of the Earth", "Prodigal Son", "Gimme Shelter", "Jigsaw Puzzle", "Jumpin' Jack Flash", "You Can't Always Get What You Want" and by Bob Dylan on his 1975 album Blood on the Tracks. By Hoobastank on their first and second albums, and by Junior Campbell on The Marmalade recordings Reflections of My Life and I See The Rain Used by Johnny Marr of the Smiths on "The Headmaster Ritual".
My brother had the single-pickup (neck) version of this exact guitar c. 1969, badged as a Tempo. I wound up with it but in the ’80s I butchered it into a four-string “piccolo bass” with a sawed-down Badass II bridge, a Bigsby, a Seymour Duncan stacked-coil J-bass pickup, and a set of phase/split switches. I sent it back to him in the mid-’90s and he tossed it. Now that I’ve gotten into guitar over the past few years, I’m sorry I don’t still have it in its original condition. I don’t believe it was ever plugged into a proper tube guitar amp.

I started playing & kinda grew up then (although my wife would dispute the 'grew up' part). We used to play mostly 9s or 10s. It depended on the quality of the neck on the guitar we could afford. A good guitar neck/fret job would let you go to the lighter 9s. You couldn't get all the great pedals then, so sustain was often achieved with some feedback, which is a product of TURNING UP the volume. Lighter strings seemed to feedback more easily. Lighter strings don't last as long as heavier ones, so unless you love re-stringing, 10s are a good compromise. I think Billy Gibbons still plays 8s, but he has a guitar tech that probably changes them for every show.

I don't have enough good things to say about this shop. Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings? Well, this ain't that shop. James, the owner, is super helpful and knowledgeable, and stocks his shop with really top quality gear. I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection). That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well. They also do top-notch repair on equipment. I brought in my Princeton Reverb for a speaker swap, and the work was completely cheaply and flawlessly. They definitely have a loyal customer in me going forward!
Likewise, six Folk/Country Western guitars were offered, with flat, corner-notched heads, belly pin bridges and tortoise pickguards. The 14″ GS240 Concert ($79.50) was a Spanish shape with natural spruce top, mahogany body, and dot inlays, presumably on a rosewood fingerboard. The 15″ GS350 Grand Concert ($99.50) was another Spanish with natural spruce and figured Brazilian fruitwood body, with diamond inlays and wood rope binding. The GS380 Grand Concert ($109.50) was the same as the GS350 except for a Brazilian rosewood body. The GS460 Country Western ($129.50) was a 16″ dreadnought with a spruce top in red sunburst, cherry-finished mahogany body, a black pickguard, sort of mustache bridge, diamond inlays and white binding. The 16″ GS570 Auditorium ($149.50) was another dreadnought with yellow spruce and full grained Brazilian rosewood body, diamond inlays and fancier rosette. The GS680 12-String Auditorium ($185) was another 16″ dreadnought 12-string otherwise the same as the GS570.
High frequency tweeters, typically horn-loaded, are included in some bass instrument speaker cabinets. Vox's 1960s-era "Super Beatle" amplifier was an early enclosure that used horn tweeters. During the late 1960s Acoustic's 260 Series guitar amp used a treble horn in the dual 15" loudspeaker 261 guitar enclosure, and Kustom's nearly 5-foot-tall (1.5 m) 2J + 1H guitar enclosure used two 15" speakers and a 15" diameter treble horn. Horn-equipped cabinets were not available for bass players until much later.
I thin Yamaha LL16 is one of the best acoustic guitar on the market . Yamaha is known for making affordable, quality guitars, and this is one is no different. It features a solid spruce top, solid rosewood back and sides, and an ebony fretboard. It is smaller than the dreadnought guitars – a fact that is neither good nor bad but that does affect the way the instrument sounds and feels.
A complete step-by-step guide to maintenance and setup of your electric guitar. This guide, packed with images, will show every aspect of essential electric guitar care such as changing the strings, adjusting the neck, and setting the action to match your playing style. It will also show you how to fix common electric guitar problems such as buzzing strings, scratchy pots and much more. Electric Guitar Repair and Maintenance is a great resource for any guitar owner.

There are lot of great amp out there, but there are overpriced. Peavey prove they can do almost as great as other for a really more decent price. Moreover, they have great features and technical improvement that the "classic" manufactureres avoid to be focus on vintage sound and their reputation... The bandit 112 is a bargain. The valveking series was great budget valve amp for metal. Classic 30 and 6505 are interesting too. Vypr series was also great but it seems their recent series have issues... Anyway they build great amp and doesn't scam people as others do... check it out!

I played electric guitar in a band from the age of 12 through to the age of 36, then gave it up. Now, at the age of 68 I want to get back into playing. I went into a store and tried playing and found that my fingertips really hurt! Are there any electric guitars where the metal strings don’t hurt or do I just need to “grin and bare it” until my fingertips get calloused again?

Is there a correct guitar pedal order? Every guitarist will move into using effects pedals in their signal chain, which is when the chaos starts. What the heck is an effects loop? Why is there more than one output on a pedal? This is the same plight mix engineers and keyboardists deal with. But thankfully, with a decent explanation, you'll find there is a logical sequence your effects should be in. Today we explain what that order is and why...
Guitar technicians need a high school diploma or equivalent, though some community colleges offer programs in guitar technology. Apprenticeships or on-the-job training may also be available. These professionals should have hearing acuity for tone and pitch and the ability to play guitar. They should know how to use electronic tuning devices, as well as hand and power tools. Guitar technicians should also be skilled at woodworking. According to 2015 data from the U.S. Bureau of Labor Statistics, musical instrument repairs earn a median salary of $35,660.

So last week I wrote about if it made sense to replace the speaker in an amp, or if it would be better to just get a different amp, I'll bet some of ya saw this weeks topic coming, right?  Once again I must begin by stating that even though we design, build and sell pickups here, we will NOT offer biased information (I promise); remember, we are real-world guitar players too.  Yep, we also need to carefully watch how we spend our money lest we find ourselves without a roof over our head!  And I mean really, I could take being homeless ... but I'd NEVER do that to a good GUITAR! Shall we dive in?
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Shape Shifter - String Instrument Finish: High Gloss Natural
{ "thumbImageID": "CE-24-Electric-Guitar-Whale-Blue/J30024000008000", "defaultDisplayName": "PRS CE 24 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Whale Blue", "sku": "sku:site51500000005478", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Whale-Blue-1500000005478.gc", "skuImageId": "CE-24-Electric-Guitar-Whale-Blue/J30024000008000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/CE-24-Electric-Guitar-Whale-Blue/J30024000008000-00-60x60.jpg", "imgAlt": "" } , { "name": "Amber Stain", "sku": "sku:site51500000005480", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Amber-Stain-1500000005480.gc", "skuImageId": "CE-24-Electric-Guitar-Amber-Stain/J30024000007000", "brandName": "PRS", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/CE-24-Electric-Guitar-Amber-Stain/J30024000007000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ruby", "sku": "sku:site51500000005479", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Ruby-1500000005479.gc", "skuImageId": "CE-24-Electric-Guitar-Ruby/J30024000006000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/CE-24-Electric-Guitar-Ruby/J30024000006000-00-60x60.jpg", "imgAlt": "" } , { "name": "Trampas Green", "sku": "sku:site51500000005437", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Trampas-Green-1500000005437.gc", "skuImageId": "CE-24-Electric-Guitar-Trampas-Green/J30024000005000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/CE-24-Electric-Guitar-Trampas-Green/J30024000005000-00-60x60.jpg", "imgAlt": "" } , { "name": "Dark Cherry Sunburst", "sku": "sku:site51500000005404", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Dark-Cherry-Sunburst-1500000005404.gc", "skuImageId": "CE-24-Electric-Guitar-Dark-Cherry-Sunburst/J30024000003000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/CE-24-Electric-Guitar-Dark-Cherry-Sunburst/J30024000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000002332", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Vintage-Sunburst-1500000002332.gc", "skuImageId": "CE-24-Electric-Guitar-Vintage-Sunburst/J30024000002000", "brandName": "PRS", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/CE-24-Electric-Guitar-Vintage-Sunburst/J30024000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Gray Black", "sku": "sku:site51500000002331", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Gray-Black-1500000002331.gc", "skuImageId": "CE-24-Electric-Guitar-Gray-Black/J30024000001000", "brandName": "PRS", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/CE-24-Electric-Guitar-Gray-Black/J30024000001000-00-60x60.jpg", "imgAlt": "" } ] }