The Yamaha's FG series FGX800C is a perfectly machined instrument. If there is one thing Yamaha is known for, it's the quality of their mass-produced acoustic guitars, which people like to pooh-pooh due to the romanticization of extremely expensive handmade guitars. Yamaha has perfected this machining process to a point where you wouldn't really be able to figure out if the instrument was put together by a luthier or if it was made on a factory floor somewhere. This is the case with nearly every accessible guitar these days thanks to machines reducing errors and driving prices down.


These guitars are to hard for most people to understand, but there is so much quality to these guitars, more than most brands. Its like a science project making them most of the stuff on Manson Guitars hasn't even been heard of being used, or even invented by any other brands. Ill tell you what I wouldn't save my money up for a expensive strat that no ones really going to be impressed with or appreciate save your change for one of these bad boys, people will pass out of enjoyment though.

To preserve the clarity of the tone, it is most common to put compression, wah and overdrive pedals at the start of the chain, modulation (chorus, flanger, phase shifter) in the middle, and time-based units (delay, echo, reverb) at the end. When using many effects, unwanted noise and hum can be introduced into the guitar’s sound. Some performers use a noise gate or noise suppression pedal at the beginning or end of a chain to reduce unwanted noise and hum.


Its simple yet effective design and revolutionary sound broke ground and set trends in electric guitar manufacturing and popular music. Introduced for national distribution as the Broadcaster in the autumn of 1950, it was the first guitar of its kind produced on a substantial scale. Its commercial production can be traced as far back as March 1950, when the single- and dual-pickup Esquire models were first sold. The Telecaster has been in continuous production in one form or another since its first incarnation.[1] The Fender Telecaster has been mostly used in music genres such as country and rock, but is also sometimes used in blues and jazz.

Fender made some pretty big waves when they announced their latest line of Mustang amplifiers – primarily because of their sound-shaping abilities. You see, the brand’s modeling amp line has 17 preprogrammed amp models to choose from, as well as an auxiliary input so you can play along to your favorite tunes, and a wealth of included effects. The real highlights of this particular amp, however, can be found outside of the amp itself. You see, it includes a smartphone app that will let you shape the sound of the amp easily and remotely. Better still, the amp comes with its own recording software, so you can capture your songs at your leisure. For something so inexpensive, this amp packs a serious wallop.
There is not one standard # of frets, but the three most common are 21, 22 and 24 frets. The extra frets simply mean you can play some additional high notes. If you are just starting out, you will probably be just fine choosing 21, 22 or 24 frets. But, you should probably avoid the fretless option unless you're specifically learning how to play fretless instruments.
guitar brands german guitar brands best korean guitars korean guitar factory korean guitar manufacturers korean guitar to ukulele manufacturers south korean guitars korean guitars acoustic all electric guitar brands good quality guitar brands acoustic bass guitar brands electric bass guitar brands quality acoustic guitar brands acoustic electric guitar brands good guitar brands More...
I think the best is at DiGiSTORMERS :: Online Music Studio - Home digistormers website and there is an acoustic guitar vsti which sounds like the real one in the products plugins section. I never use anything else. I used to record live guitars, but using this it is not needed anymore. Also mistakes are recorded!!! It is not perfect then, so it sounds more realistic.
The Hi Flyer guitar and bass would be offered pretty much until the end, in ’77. At some point after, probably around ’73 or ’74, the plastic logo was changed to an outline decal logo. Also, at some point the pickups were changed to the distinctive twin-coil humbuckers with metal sides and a see-through pink insert on top. These changes most certainly occurred by the ’76 catalog, when the Hi Flyers were available in four finishes – sunburst (U1815, U1815B), white (U1816, U1816B), black (U1817, U1817B) and a cool natural with maple fingerboard and black dots (U1818, U1818B).
Another thing to keep in mind is the purpose of the amplifier. And I don’t mean the actual purpose. We all know that I’m pretty sure. What I mean is what you will be using it for? Are you a beginner who wants to practice a lot in their basement before they ever take their guitar and amp into the daylight or maybe you have been playing for quite some time and want to record your music. MAYBE you have gathered all your strength and confidence (and your band) and decided to gig. All of these situations are somewhat different and various amps work for different purposes. While there are a lot of amps that do all of them together, sometimes getting an amp just for practice might be more efficient and, of course, affordable.
You planned out your hardware but it is best to make the purchase after you know you have the body and neck built and made sure they will fit together. If you have made it to that point, you are ready to put in the hardware components. Realize that you may need to do some basic soldering. If you need some guidance in that area, you can get it in a free course on metalworking.
Consider the MusicMan SR5 20th Anniversary basses, with a "mahogany tone block" channeled into an ash body, running from the neck, through the pickups, to the bridge. I've played several of these basses, and the best two of them were really outstanding (I own one of those). Could be any number of reasons they sound as good as they do, but there you have it.

It comes in lots of different colors, has a great quality at a bargain price. The HSS combination of this guitar is capable of playing a wide range of tones and sounds. It has a solid body and is quite comfortable to play. It has a Tremolo Bridge, which is not the best in the market but works quite well. Then there are tuners, which are also good enough. 
There's just no getting around the Martin brand when there's talk about good acoustics. And since we're talking about the best of them, it's not surprising to find their name filling up multiple slots in this list. The Martin DRS2 acoustic guitar is special because it gives us a true all-solid wood body Martin acoustic guitar - at a very reasonable price point, in the dreadnought shape that the company themselves developed.
Use of a slide or bottleneck. The term slide refers to the motion of the slide against the strings, while bottleneck refers to the material originally used for such slides: the necks of glass bottles. Instead of altering the pitch of a string in the normal manner (by pressing the string against a fret), a slide is placed upon the string to vary its vibrating length and thus its pitch. The slide can be moved along the string without lifting, creating continuous transitions in pitch.
If you already have an electric guitar and you're looking for replacement strings, carry cases, guitar stands, or other accessories, you've come to the right place. Amazon.com offers a selection of tools and accessories designed for players of every age and skill level, from beginners to pros. Look for amplifiers, cables, and microphones too—you can enjoy great selection right here online, with no need to make a special trip to the guitar shop.
Wow, to work with Johnny Mac! But he makes anything sound better, right? I am not a Stick player (love the instrument though), but I would think with a well-tuned setup, it might actually be easier? I think Tony Levin is running a Kemper now for his Stick. The whole idea isn’t an either/or thing, or which one is better. The idea is “running direct is a thing now, and here’s why.” But no one is taking our amps away. BTW, Bootsy is cray cray.

If you’re looking for a decent guitar at a super affordable price, look no further. This Ibanez features Powersound Pickups as well as 5-way switching to give you a variety of tones and styles. With a contoured body, it’s super easy to get comfortable while shredding away on this puppy. If your music styles fall in line with hard rock or country, then this is the guitar for you!

The Professionals, just like the Standards before them, are designed to appeal to a wide range of players with a wide range of styles. These are not for vintage obsessives. Most of the changes are relatively subtle: a new 'modern deep C' neck shape; new narrow/tall frets; and the Teles revert back to three (compensated) brass saddles over the previous six Strat-style saddles. Both single coils here use Alnico 5 rods on the bass side and Alnico 2 on the trebles and we have a treble bleed RC network on the volume. A basic trio of sounds shouts 'contemporary Tele' from the biting harmonically rich honk of the flat- pole bridge, through the wider, less quacky pickup mix, to the less hard-hitting but not soft neck voice. It's like someone has EQ'd the sound to balance and maximise its Tele-ness. There's a very lively ringing resonance, too: all the planets seem to align, the maple neck/alder body perhaps pulling down a little edgy spike, while those brass saddles - not to mention the through-body stringing and the more classically voiced pickups - combine to create what seems like a modern Tele in spec but one that has plenty of classic, vintage reference.The colour/wood choices are wide and the subtle improvements to the build - on an already very well proven chassis - make a noticeable change, not least the new neck shape and the taller fretwire. Yes, we've played thicker, beefier-sounding Teles, and thinner, brighter ones, too, but as a foundation tone, which also includes a very smart and practical, lightweight moulded case, it all becomes a bit of a no-brainer.

The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.

Tremolo is the gentle art of making your signal subtly cut in and out of volume. Think of all those old surf records. Phase and flange are quite similar in essence; phase emulates the sweeping of the frequency band, alternating between cutting the bass and treble frequencies, while flange does a similar thing but with a slightly more extreme sound. Wah is perhaps more well known; the Jim Dunlop Cry Baby wah pedal has been used for decades by players of all genres. Adding a highly distinctive wah-wah sound can elevate a solo into something infinitely more interesting. Or it can add a bit of that classic wakka-wakka sound you hear on classic funk records.
Another option would be to instead buy a mobile guitar interface and download one of the many guitar apps available, but I typically don’t recommend this for beginners. These apps are very robust, and can be a little overwhelming for someone just starting out. First learn how the controls on a real amp affect your tone. Once you’ve grasped these basics (and acquired some basic guitar skills), you can think about buying some fancy apps and effects.
Then, as the most popular version goes, a young, jack of all trades guitarist named Les Paul got tired of all that. So, he set out to create a guitar that could be heard just as much as the louder instruments. He fiddled with a lot of electronic means to boost his sound. Some worked better than others. His piece de resistance at the time would come to be known as "The Log". It looked like what you see up there on the left:
Here you will find a list of beginner guitar chords. These chords are very commonly used through many popular songs and so learning them is a great foundation for your guitar future. With the chords below you will be able to play thousands of songs, including most of your favourites. And once you have learnt these chords and the changes between them you will find it very easy to learn new chords and add them to your repertoire.
20 pages, black and white with color front cover. In the middle of 1981, Rosetti took over distribution of the Gibson line in the UK. Rosetti were a very big name in Britain, having distributed Epiphone since at least 1963, as well as Hagstrom and others. This catalogue was produced at the tail end of 1981, and introduces a number of models to the UK, such as the MV-II, MV-X guitars and the Victory basses, the GGC-700 and the Flying V bass. Some of these models were so short-lived that they were actually never included in US brochures. The cover image (reproduced in part here) showed some of the earliest demonstration models, including a Victory with a highly unusual white scratchplate.

In the grand scheme of things, fixed bridges are as simple as it gets. Aside from saddles, which are used to tune in intonation, there are usually no other moving parts involved. The benefit of fixed bridges is their ability to retain intonation and tuning over time. If you're just starting out, sticking with a fixed bridge will make your life much easier. However, it does have its limitations compared to a tremolo bridge.
{"product":{"id":"113884849","stock":"instock","price":"219.99","name":"Thunderbird IV Electric Bass Guitar","download":false,"sku_id":"113884849","checksum":"117352072023","rep_id":"site5113884849","displayId":"113884849","sku_display_id":"113884849","sku_rep_id":"site5113884849","gc_pro":false},"category":"Electric Bass","pageName":"product_detail","subcategory":"4 String Electric Bass","dept":"Bass"}
{ "thumbImageID": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "defaultDisplayName": "Fender Special Edition Deluxe PJ Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Olympic White", "sku": "sku:site51500000048792", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Olympic-White-1500000048792.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Olympic-White/H96715000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-Olympic-White/H96715000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "3-Tone Sunburst Maple", "sku": "sku:site51434378852529", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple-1434378852529.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple/H96715000003006", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple/H96715000003006-00-60x60.jpg", "imgAlt": "" } , { "name": "Sea Foam Pearl", "sku": "sku:site51365435327256", "price": "699.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl-1365435327256.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000-00-60x60.jpg", "imgAlt": "" } ] }
If you're getting your amp for the purposes of playing out with a band, it's very tempting to invest in a large amplifier, whether that means a big combo or a half-stack (don't even mention a full stack). I get it; it's what the pros use when they're rocking out at festivals. The reality there is that the vast majority of the time, whenever you see a guitarist with a wall of sound, it's comprised mainly of dummy cabs with no actual speakers. It's for the look.
A third product which does not fit into the "combo"/"head"/cabinet categorization are powered speaker cabinets designed for use with bass instruments. While these powered speakers share many features with a regular combo amp, a bassist cannot plug her bass directly into a powered speaker cab. The powered speaker system is designed to operate as a "slave" to another amplifier's unpowered signal (or another combo amp which has a pre-amp out jack). Some powered speaker cabs only accept a "link" XLR cable from the main amp. Some powered speaker cabinets are designed as part of a company's line of bass amps; as such, the colour of the cabinet and its grille match the combo amp which will be placed on top of the powered speaker. As well, the powered speaker may have interlocking corners to ensure that the main amp stays put on top of the powered speaker.

Boost effects are simple effects that increase overall volume. However, every boost pedal is very unique and often sounds different. It always comes down to the type of components the effects pedal manufacturer used to achieve the volume boost. Some boost pedals try to maintain the guitar tone while providing a volume boost, others can heavily affect the guitar tone while providing a volume boost. Oftentimes, guitarists will get a specific boost pedal and use it as an always-on effect because they like the way the boost pedal colors their tone.


Bob, 66 is not too late to start playing. I play classical guitar, my preference and I -also play steel string scoustic guitar. I own a Taylor because it lends itself nicely to finger style picking (carried over from my classical guitar. I play with a harpest who did not begin playing until she was 73. She is now 86 and plays someplace almost every day of the week. It's never too late to begin. Go for it I'm 69 and playing more gigs than ever.
This is one of the most frustrating questions from the MIJ collector. As I've read many different guitar collector/enthusiast forums and spoken to local guitar dealers, it's clear that the layperson has little to no idea who made their badged guitar from the 1960-1980 period, also known as the MIJ golden age of guitar manufacturing. People often make the mistake of citing the American or European importer as the 'maker' of the guitar, when in fact several Japanese manufacturers were producing badged guitars out of their plants and shipping them to America and Europe to sell. Japanese manufacturers made multiple badges at the same plant, many of whom resemble each other closely. Some manufacturers merged or changed hands over the years which added to the confusion, sometime merging with another maker, only to pick up their name later. In some cases a manufacturer would farm out production to various manufacturers, making it still more difficult to know who made the guitar in your hands. Parts from other guitars would be used in the making of a particular badge for a period of time because it was all the manufacturer had to hand...which doesn't always help in identifying a maker. And sometimes, the guitar which is supposed to be an MIJ guitar is actually made elsewhere (Korea, Indonesia) because production was moved during this period in history. Sounds hopeless, right? Not always!
If you are not shopping online, then get to the nearest local instrument store and try out different guitars by playing them while switching between different positions in standing and sitting down. Plug them in and turn them on. Stand in front of a mirror with them on hand. Try holding it up like George Harrison, and downwards like Slash. Its different tires for different cars—so there are no hard and fast rules, but your eyes, hands, and ears will tell you what suits you best.
Due to the good critical response received, the ATH-M50x can be considered the flagship of Audio-Technica headphones, and it definitely doesn’t disappoint. It’s clearly a professional product, so much so in fact that philistines who dare compare it to models directed at casual entertainment get verbal beat downs in comment sections from its many fans.
I have a problem with the way the neck bows going down from the low to high e strings. I have a Gibson les paul with the recent change in seasons I notice it on all my guitars I can adjust it out but it will some times just do the same thing, I see this on my fender and my Acoustic guitars as well when I adjust this I have a lot of problems with tuning I know this is not exactly what we were talking about but jut a question I wanted to ask I hope I made what I am saying plain enough I am pretty new to all of this. Thank you for all the great info.
Les Pauls are all about that heavy metal feel and heavy weight. When they were first introduced, they had two p-90 single coil pickups. Today, they use double humbucker pickups for outputting a thick, sustainable sound. Like Tele and Stratocasters, they have a single cutaway shape. Heavy rock musicians love Les Pauls. Fender offers an affordable range of Les Paul electric guitars compared to Gibson, but Epiphone by Gibson is a hot item for the beginners.
Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
Compression is somewhat of a utilitarian effect, though I suppose some players see it as a key part of their sound. Essentially, compression is used to even out your sound. In recording situations this means helping instruments blend together by smoothing out the peaks and valleys inherent in the overall frequency spectrum. Louder sounds, like the crack of snare drum or a shout from a vocalist, become smoother, softer and woven into the overall mix.
Black trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

This tonewood isn’t a very common wood used. But, when it is used on a solid-body guitar, you’re definitely going to have access to deeper, richer, and woodier tones. However, pair it with a Cedar top and you can have bright and warm overtones. Paired with a Spruce top, you can play to get an aggressive bite on the trebles with a definite presence on the low end.
The inlays are the little shapes that are installed in the instruments neck/fretboard. Inlays do not make a significant difference in the sound of the instrument. They come in various shapes and materials. Inlays allow a player to quickly see where certain positions are located on the fretboard. They are also a great way to decorate, or personalize an instrument. Choose among our existing inlays designs, or send us a drawing of your own designs. Some popular inlay designs are band logos, initials, corporate brand logos, or tribal designs.
However, even for recording experts who can discern if something was done at Columbia Records Studio A or Olympic or wherever, it’s challenging to define a percentage of influence that the studio provides. “I don’t know that you can measure it in any way. It’s really more an ineffable quality of sound and aesthetics,” Horning Schmidt says. “You can measure frequency response and you can measure decibels but in my research I’ve found that back in the thirties and forties, you had engineers saying ‘you can’t just go by the meters. You have to use your ears.’”
Even with such a lightweight configuration, the Fishman F1 system is still more than capable of rendering the tone of the DCPA4R with a great deal of accuracy due to the superior tight focus on the preamp. This guitar is our pick for the top acoustic electric guitar if price is no object. There are many other awesome models out there and we urge you to check them out as well, but you'll likely find that your search could have ended right here.
Some of the best pedals in this segment, like the TC Electronic Sentry, will allow you to set both the volume threshold where the noise gate kicks in, and the type of interference you want to filter out. The important thing to remember about noise gate pedals is that they only eliminate hissing when you don’t play. As soon as you do, the pedal disengages and the noise comes back. With that said, noise gate pedals are essential for a good tone.
Whether you play classical folk or modern metal, it doesn't matter. There is an amplifier to suit the needs of your music and your bandmates. All you need to do is take a moment to determine which features you need and you'll have plenty of amazing options to choose from. If you're just having a browse or aren't entirely sure where to begin your search for an amplifier, you'll almost certainly be best served by checking out our top sellers. An option such as the Fender '68 Custom Deluxe Reverb 22W 1x12 Tube Guitar Combo Amp with Celestion G12V-70 Speaker, for example, might be just what Doctor Rock ordered. This amp is small, yet powerful, and absolutely loaded with tone. Both of its channels boast reverb and tremolo, and, best of all, the "custom" channel features a modified Bassman tone stack, allowing for even more flexibility when you plug in and play.
Unlike the guitars we have mentioned so far, the Taylor BT2 Baby Taylor is a travel guitar. In other words, it's a 3/4 scale size of a standard dreadnought, making it easier to play for a lot of us. The top wood is a solid mahogany piece while the back and sides are made of layered Sapele. The use of laminate wood is one of those friction points which many purists like to point out to. However, the way Taylor builds these guitars, you really won't hear a difference. In this case it's only a visual difference, and a fairly attractive one at that.
International shipping and import charges paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping and import charges are paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab International shipping paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping is paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab

Arai, Aria, Aria Pro II, Aria Diamond, Apollo, Arita, Barclay, Burny, Capri, Cimar, Cortez (electrics only), Columbus, Conrad, Cutler, Dia, Domino, Electra, Epiphone, Granada, Hi Lo, Howard, Ibanez, Lindberg, Lyle, Luxor, Maxitone (this guitar differs from Tama's Maxitone badge), Mayfair, Memphis, Montclair, Pan, Pearl (electrics only), Raven, Stewart, Tempo, Univox ,Vantage,V entura, Vision, Volhox, Washburn, Westbury, Westminster, Westone


Judging by many of my last few years guitar purchases (on Ebay and elsewhere), I’m the kind of a person who seems to think he’s the kind of a person who likes guitars with a lot of knobs and switches. I’ve bought several multi-pickup guitars. Old ones, new ones, new ones made to look like old ones (not those stupid “relic-ed” ones, though…I’m an idiot, but I’m not stupid). Yet, as I look at the keepers in my collection, I’ve only kept one guitar with more than four knobs, and none with more than two pickups. Odd.
​​Our primary goal here at Top Custom Guitars is to create unique instruments that match our players' personalities. The bond we've formed over the past 15 years with each of our clients has not only fueled the growth and maturity of our instruments, it's fueled our creative growth as a company. YOUR passion drives OUR passion, and because of the individual relationships we build with our clients. Enjoy our galleries and forums, and if you have any questions, ideas, or dreams to share, we’d love to hear them.
Pickup(s) 3 or 2 single-coils, with the latter having a hot humbucker in the bridge position,[1] with the exception of the Acoustasonic Strat and Stratacoustic models, the only acoustic Stratocasters.[1]Most Stratocasters generally came with a pickguard; on certain high-end versions, the pickguard is absent. There are also select models that come with active electronics and HSH, HHH, HH or Hpickup configurations.Humbucker-equipped Strats are often referred to as “Fat Strats”, in reference to the fact that humbucking pickups usually tend to have more bass in the output signal than single coils, thus making the sound “fatter”.
Mr. Bojangles,Nitty Gritty Dirt Band, Leaving on a Jet Plane, John Denver, City of New Orleans,Steve Goodman, Alice’s Restaurant & Motorcycle song, Arlo Guthrie, Bobby McGee, Janis Joplin, Taxi, Harry Chapin, Please Come To Boston, Dave Loggins, Lady, Little River Band, Sailing, Christopher Cross, Lookin’ Out My Back Door, Credence Clear Water Revival.
Whether you are a guitarist looking for new tones, or a sound designer looking for new ways to mangle your audio, virtual guitar amps and effects are a great way to achieve new sounds and enhance your productions. There are many great guitar amp and pedal effects plug-ins available on the market today to purchase, but there are also numerous effects that are available for free. In this article I'll offer up some professional guitar effect plug-ins from around the internet that you can use on your next project, completely for free.
Re-amping a DI'd keyboard or bass can really liven up a sound, but if you don't have access to a nice amp or amp modeller, you can simulate the effect by sending the audio to a bus with a delay plug-in set to a short delay time and with the wet signal set to 100 percent and dry to 0 percent. Then send the bus's output to another bus with a distortion (or better still, a guitar amplifier emulator) plug-in inserted. This simulates the delay you get from miking up a speaker, and if you blend this in with the DI'd sound, it can give the recording a live feel — especially if you use a convolution reverb to add some 'room' ambience. You may also want to roll off the very low and high frequencies to help get rid of that DI'd vibe. Nicholas Rowland
Another exotic tonewood is making a name for itself in the guitar industry. It’s similar in appearance and sound performance as Mahogany. It has a distinctive punch for the mid-range tones, but it emphasizes the bright trebles that can be an asset in music when you achieve pitch-perfect intonation. The Martin Road Series DRS1 Guitar sports Sapele beauty perfectly!

For most players, the ideal location to place modulation effects—which include phase shifters, flangers, chorus, rotary, tremolo, vibrato and so on—is directly after a compressor and/or overdrive/distortion pedal. When these effects are distorted after the fact, the sound tends to smear and lose definition (particularly with chorus), although there are a few exceptions where distorting a flanger or phase shifter can sound really cool. The best example is Eddie Van Halen, who doesn’t use distortion pedals and instead generates all of his distortion from the amp. When a flanger or phase shifter is placed in front of a distorted amp or overdrive pedal, it can create dramatic thick, jet-like phasing and flanging effects (See Example 2, below).
In the ever-changing world of jazz music, you shouldn’t be surprised to hear of some big changes to the jazz guitar market either! To reflect this we’ve tweaked our chart, removing a couple of models such as the Ibanez AF95FB and the D’Angelico EXL101, and adding five new six-strings. These comprise the faithfully reproduced Epiphone Masterbilt Zenith Classic and the thinbody LH-302T from The Loar. In the semi-hollow section, we added the Ibanez AM93AYS Artcore Expressionist and the beautiful Hagstrom Tremar Viking Deluxe, while the solid-body section saw the arrival of Fender’s Classic Player Jazzmaster Special.

At this point you should have the pots, switch, and jack out of the guitar with the pickup wires still connected. You can either de-solder the pickup wires or use wire cutters to clip them off. If you’re replacing the pickups as part of your re-wiring, you can do this now (I did not in the example photographed here). Just feed the leads of the new pickups back through the holes in the pickup cavities.
Theory - These sessions will be devoted to investigating how the fretboard works, how strings and notes relate to each other, what chords are made up of etc. A lot of theory time will be spent reading and analysing diagrams and your guitar's fretboard. This aspect is for understanding how music works on the guitar, to map out the fretboard in your mind so you can later apply the physical techniques with confidence. If you're serious about getting good on guitar, you need time devoted to theory.
Given the small amplifier that comes with the Rise by Sawtooth, one would have thought it wouldn’t offer much, but it turns out to be just everything you ever wanted in a beginner or intermediate electric guitar, even as it is capable of giving that adequate sound and melody when connected to the guitar using the connecting cable that comes with it.
Healthy forests are vital to all of us, for many reasons. We must preserve these precious resources for future generations. To that end, Oregon Wild Wood strives to provide only salvaged wood, trunks and stumps left behind from old timber harvests, trees that have died and/or must be removed, trees from commercial groves that become unproductive, and even wood salvaged from old buildings and structures. Your next guitar can be a source of pride in yet another way.
From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.
Fortunately, some of the best happy accidents have been preserved for posterity. For over 40 years Seymour W. Duncan has kept meticulous notes on the best pickups to cross his workbench. Many of these have been resurrected as Seymour Duncan models. For example, our ’59 Model is based on a particularly sweet-sounding ’59 P.A.F. in one of Jeff Beck’s guitars. Another of our models, the Pearly Gates, is inspired by another, rawer-sounding ’59 P.A.F. That’s just one example of two supposedly identical pickups from the same year displaying different musical personalities.

Ibanez Mikro GIO Electric Guitar in Black w/ Bag. The guitar is in good working condition does have few marks and one nick. Does not include stand just used to take pictures. Includes guitar strap and Ibanez bag. Please contact me if you have any problems with your purchased item and I would be Happy work with you to help make your Transaction a Pleasant Experience.           Please check photos carefully and use the enlarging tool. Some photos are taken with a flash and may cause the image to appear darker in some areas. Photos are an important part of the description and the condition of each item.Thanks for Looking!!           Also please verify the correct shipping address before bidding. Payment is expected within 48 hours.    
Founded in 1976, Schecter Guitar Research started out by producing replacement parts for existing guitars of the era. They then took the production a step further by custom building guitars, and have grown steadily ever since. Today, Schecter is known for their extensive line of mass produced electric guitars, and their instruments are well received in the rock, punk and metal circles.
Buddy Holly was one of the pioneers of the Stratocaster and used the instrument on virtually all of his songs with the Crickets. During the recording of “Peggy Sue”, rhythm guitarist Niki Sullivan was not needed for the song, and instead stood next to Holly, and flipped the selector switch of Holly’s guitar from the neck pickup to the bridge pickup for the guitar solo.
So, if you’d like to emulate some of the guitar greats like Jimmy Page (Led Zeppelin) or Slash, this Epiphone package again with all the extras you’ll need—but with an Epiphone guitar—is a great way to start. Also, it’s worth mentioning that Gibson/Epiphone Les Paul designs usually have a slightly rounded, more narrow fret board and, in my opinion, are a little easier to play compared to the flatter, wider Fender fret boards. But I strongly recommend you don’t take my word for that. Get into a music shop and try the two types of guitar for yourself.
Even though pickups are the main component tasked with interpreting string vibrations and indirectly turning them into sound, your choice of wood still matters. Although the effect is subtle, certain woods will give you better sustain, more definition, and so on.  And in the end it's the accumulation of all of these choices that determine your ultimate sound.
{ "thumbImageID": "RG550-Genesis-Collection-Electric-Guitar-Purple-Neon/K59743000002000", "defaultDisplayName": "Ibanez RG550 Genesis Collection Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Purple Neon", "sku": "sku:site51500000177727", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Purple-Neon-1500000177727.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Purple-Neon/K59743000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RG550-Genesis-Collection-Electric-Guitar-Purple-Neon/K59743000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Road Flare Red", "sku": "sku:site51500000177726", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Road-Flare-Red-1500000177726.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Road-Flare-Red/K59743000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RG550-Genesis-Collection-Electric-Guitar-Road-Flare-Red/K59743000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Desert Sun Yellow", "sku": "sku:site51500000177862", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Desert-Sun-Yellow-1500000177862.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Desert-Sun-Yellow/K59743000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RG550-Genesis-Collection-Electric-Guitar-Desert-Sun-Yellow/K59743000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Gloss White", "sku": "sku:site51500000177863", "price": "999.99", "regularPrice": "999.99", "msrpPrice": "1,333.32", "priceVisibility": "1", "skuUrl": "/Ibanez/RG550-Genesis-Collection-Electric-Guitar-Gloss-White-1500000177863.gc", "skuImageId": "RG550-Genesis-Collection-Electric-Guitar-Gloss-White/K59743000004000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RG550-Genesis-Collection-Electric-Guitar-Gloss-White/K59743000004000-00-60x60.jpg", "imgAlt": "" } ] }

Back again! I sold the Eagle Jazz bass copy, but have acquired a hollow body 3/4 bass that we believe said Lyle or Aria on the peg head (badge gone). Interestingly it seems like possibly a copy of a Kay design, florentine cutaway with a sunburst. Three of the tuners are missing the bushings, and I'd love to know how to get replacements! I may have to manufacture something, but don't own a metal lathe. Also found a Strat copy that says Mark II on the peg head, nice mahogany neck, in a dumpster along with a Jackson Dinky. Stole parts off the Dinky to make the Strat copy whole, and I like it better than the Mexi-Strat and Squier Affinity start I had, so I sold those, and the Jackson after replacing the bridge parts I'd stolen off it. Besides, I still haven't got all the magic marker off the pick guard on the Mark II (recently heard they were made by Cort, or whoever makes Cort). I bought a Telestar (believe it was made by Teisco) in a thrift store for maybe $12.99 or something like that. I love the pickup sound, but the neck doesn't get any wider as it approaches the body and the frets get closer together. I also have a San Antonio made Alamo like that, and sold off a Silvertone (made in Japan) tiny hollow body with that issue. The necks are hard to play! But I like that pickup on the Telestar so much I can't part with it.
One difference today is the number of big-name guitar brands that make affordable acoustic and electric guitars, which are often versions of their pro-level instruments. These days, you can own a Les Paul or a Stratocaster as a beginner or intermediate player. Of course, they aren’t the same as the Gibson or Fender flagship models, but they are still darned good guitars based on those designs.

The design of this guitar probably makes it stand out from the “crowd.” This is another awesome six string acoustic guitar from the brand Juarez available in sunburst and black . It is designed for the right handed and mostly comes in Sunburst color without a bag. The body is made from blackwood with the top laminated with Linden Wood. The entire structure has a natural gloss finish, with the fret board having up to 18 frets. The hardware structure has a chrome finish. Prices are quite fair, ranging from INR 2,790. Find more details below.


Great Gretsch "pumpkin orange color", and a great sounding, and playing import reissue. Knobs replaced with dice, and a couple of decals added. Has factory installed Epiphone labeled Bigsby trem-tail piece, no longer available on this model. Chrome p-90 pick-ups. Guitar, and original hard-shell case in like new cond. New list on these is $1195.00 with original hard shell  case.
Another reason that some bassists prefer the "bass stack" approach is that it is much easier to customize a separate preamp/amp/speaker cabinet setup with a bass stack than it is to customize a combo amp. With a bass stack setup, a professional bassist can handpick the brands of preamplifier, graphic equalizer, power amplifier and speaker cabinet(s) they wish to use. It is also much easier to replace defective components with a bass stack than with a combo amp. If the power amp on a combo amp fails, only an electronics technician can repair or replace the power amp. With a bass stack, in which the power amp may be a separate component in a rackmount road case, the defective power amp can be removed with only a screwdriver and a new power amp can be mounted in the rack and connected to the other components. This facilitates replacement of components while on tour. Touring bassists may travel with one or more backup amplifier heads, to use in case the main amplifier head develops a technical problem.
The Gretsch G5421 Jet Club in Firebird Red is one of our favourite cheap electric guitars that features superb, world class build quality at an extremely budget friendly price tag. This is a professional level guitar at beginner prices and an absolute workhorse ready to be unleashed upon the stage of the world or just to accompany you on your journey into guitar. A chambered basswood body construction makes the guitar light on the shoulder but also provides a fantastic resonance and crispy treble.
If you’re paying attention, you probably noticed that I forgot to mention EQ and volume pedals. Actually I didn’t. Placement of these particular pedals depends more on what you want to achieve with them than any hard and fast rules. For example, you may want to place a volume pedal at the very front of the signal chain to perform dramatic fade in and fade out effects or to better regulate the guitar’s level before it hits any effects (or you could just do what I do and use the guitar’s own volume control). Placing the volume pedal near the end of the signal chain just before the delay and reverb effects allows you to perform professional-sounding fades or mute the guitar’s signal without cutting delay or reverb tails short. If you use a loop switcher, a volume pedal can be paired with a single effect, and you can use the volume pedal to blend or mix that effect independently.

While the combination of guitar, amp, effects and technique all play a crucial role in achieving the desired tone, it’s important to choose the right guitar for the job in the first place. There’s a reason why Stratocasters, Teles, Les Pauls and ES-335s have featured on so many classic recordings over the years; it’s because they are as reliable as they are versatile. That said, don’t be afraid to try guitars fitted with more esoteric pickups, such as Gold Foils, for a less generic sound.   P-90s are another great studio weapon; less dense than humbuckers, they can provide plenty of rhythm raunch without crowding the mix.


Ok so currently i run a Mesa 20/20 along with a GSP1101 and a MXR 10-Band EQ pedal. I love the MXR but would like to get a EQ in rack form. I see about a millon rack EQs out there but not sure which ones are made for guitar? They seem more focused on live sound/PA/Home recording..I am not sure if there all the same, Meaning a PA EQ will work for a guitar rack.
Automatic Track Creation & Loop Recording: A new layer (track) is created each time you start recording and each time a Riff loops. Stack layers on top of each other (bass, guitar, vocals) to create a Riff. Use looping to create multiple tracks, do multiple takes, etc. Each layer has controls for mixing and effects. (4 tracks with T4, 24 tracks with Standard)
Standard versions and collectable versions of the 4003 have included the 4003s (special)(discontinued 1995) a 4003 similar to the 4001s with dot neck markers, no body binding based loosely upon the original Rickenbacker basses and fitted with 4001 pick ups. 1985-2002 versions of 4003 and 4003s were available with black hardware option and black binding. Other later special editions have included 4003 Blue Boy, 4003 CS (Chris Squire) similar to 4001 CS Limited edition specials include the Blackstar, the Shadow Bass, the Tuxedo and 4003 Redneck.
Some of the best pedals in this segment, like the TC Electronic Sentry, will allow you to set both the volume threshold where the noise gate kicks in, and the type of interference you want to filter out. The important thing to remember about noise gate pedals is that they only eliminate hissing when you don’t play. As soon as you do, the pedal disengages and the noise comes back. With that said, noise gate pedals are essential for a good tone.
In 1950 and 1951, electronics and instrument amplifier maker Leo Fender through his company, designed the first commercially successful solid-body electric guitar with a single magnetic pickup, which was initially named the "Esquire". The two-pickup version of the Esquire was called the "Broadcaster". The bolt-on neck was consistent with Leo Fender's belief that the instrument design should be modular to allow cost-effective and consistent manufacture and assembly, as well as simple repair or replacement. The Broadcaster name was changed to Telecaster because of a legal dispute over the name.
Funny, the Dorado was manufactured in Japan during the 70's and the Japanese factory worker must have arbitrarily placed a model number when he or she felt like it. However, it seems that Serial Numbers (presumably in proper sequence) were always assigned and hand written with a black ink pen. My example, while space is present, is void of any model number.
The neck, which extends from the guitar body, includes the fretboard and headstock on which the tuners are mounted. It contains a metal truss rod that prevents neck bowing and twisting, and can be adjusted to help the guitar maintain consistent pitch. The fretboard is usually made from a thin layer of rosewood or ebony, although some models, usually with maple necks, have a fretboard made of the same wood as the neck. Most fretboards have position dots or other markers inlaid in the fretboard. Some models have markers on the upper edge of the fretboard offering the player easy visibility.
Measure the height of the strings at the twelfth fret. For most playing styles, the height between the bottom of the low "E" string and the top of the twelfth fret should be a hair over 2/32". The High "E" string should be set at 2/32". The other strings should gradually flow between these measurements. This is where I would start, but the player's style (particularly their right-hand attack), as well as string gauge, scale length and individual neck nuances may necessitate deviation from these numbers.
Guitar strap: If you intend to stand up while playing on guitar during live shows (and most people do), then you need to practice in the same position like when you’re playing live. Your muscles and hands are in a completely different position when you’re sitting down and when you’re standing, and that’s why you MUST get a strap right from the start and practice standing up, as well as sitting down. Price: $10 – $15 should do the trick.
Rickenbacker: From making world’s first electric guitar to making the most iconic guitars of Rock’n Roll, Rickenbacker has a history of innovations in guitar industry. Their guitars are still made in the old way. Owning a Rickenbacker is pretty much like owning a classic muscle car, yes there may be more modern guitars out there but no one’s got the mojo of a Rickenbacker.

In the 2010s, virtually all of the sound reaching the audience in large venues comes from the PA system or sound reinforcement system, the huge speaker systems pointed at the audience. As well, in the 2010s on-stage instrument amplifiers are more likely to be kept at a low volume, because when band members have their onstage amps "cranked" to high volume levels on stage, this makes it harder for the audio engineer to control the sound mix and blend. For example, if a heavy metal bassist had two 8x10" cabinets and several 1x18" subwoofer cabinets and several thousand watts of bass amplifier heads, and these amps are set to a very high volume level, this bass player will be creating very significant onstage bass volume. If the sound engineer wished to turn down the bass in the PA/sound reinforcement system, this bassist's loud onstage volume would make it hard for this engineer to control and/or reduce the volume of bass in the FOH (Front of House) sound mix. Another issue that can develop with bass players who have very high onstage volume is that it can be hard for the audio engineer to produce a clean sound through the PA/sound reinforcement system. For example, if a bassist was driving her bass amp speaker stacks into clipping to create a fuzz bass tone, if the audio engineer wished to have a "clean" bass sound, this could pose a challenge.


Many users describe it by phrases like "great value for the money", "great beginner guitar", and "great quality for the price". And while most of the raves are from beginners, there were experienced guitarists who shared their positive sentiments, specifically pointing to its build quality and playability. And while many cheap guitars are plagued with mass production setup inconsistencies, the Epiphone Les Paul Special II gets a lot of kudos from users who found that it plays nicely right out of the box.
In the ideal scenario, once set, your saddles should neither be flush down on the bridge assembly of the guitar, nor extended so high they could go no further. This saddle height relative to the bridge assembly is a reflection of the neck angle. If the saddles sit flush, the neck angle is not set back very far and vice-versa. This is where you should decide if your neck angle is in need of adjustment ( if you have a bolt-on neck). Check the measurement at the 12th fret then progress up the neck, measuring every couple of frets. The string height should continue to gradually rise, if it doesn't the neck is set back too far and has to be tilted up just a little. This is a very sensitive adjustment and the thickness of a couple sheets of paper can make a big difference. Some Fenders have a neck tilt adjustment screw that is accessed with an Allen wrench through a hole in the neck screw plate. The strings must be loosened, then the neck screws, then the tilt adjustment screw is tightened or loosened. Never do this when the neck screws are tight! If you don't have a tilt adjustment, thin shims of wood veneer are fitted in the neck pocket to adjust neck angle. Uneven frets are also a possibility. If , after having followed all the above steps, you are still getting fret buzz, you must establish that the frets are all even. But this leads us to fret dressing, which is another story altogether.
Located in Kobe, Japan, this manufacturer made the famous Maya brand guitar. Maya guitars were in production from 1970-1980. It's been suggested that Maya may have been responsible for the Aztec badge. You'll notice that Maya has been attributed to a company known as Tahara. At this point I do not know if Maya assisted in production or if Tahara produced some Maya guitars as a subcontractor. Maya and El Maya badges have also been attributed to Chushin Gakki. More research is needed to clarify this point.
Guitar pedal multi-effects units comprise several effects in just one package. Multi-effects units utilize digital processing to bring out different sound effects when playing guitar. These digital multi-effects pedals come with internal memory in order to save your individual settings. Among the top-rated multi-effects brands you might want to check out are the DigiTech RP and GNX series, the Boss ME-20 and ME-50 models, the Boss GT-6 and GT-8, the Zoom G2, G3, and G5, various Behringer models, and the Line 6 POD.
The first design was an Early Telecaster model, called Squier, with a single mic. The main contribution Leo Fender did, was the bode and neck removal separetly. In previous models, when the guitar need repairs, the complete instrument needed to be sent, while, after Leo fender design, the plate could be unscrew and sent to the shop only the damaged part.

Potentiometers (Pots) for audio are used to adjust tone and volume. Pots are resistors with three terminals and a sliding contact (the wiper) that creates an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are most commonly used as control devices, such as volume control on audio equipment. A potentiometer for Audio applications would feature very low to no introduced noise.


You have 16 different modulation effects including chorus and flange, 12 overdrive/distortion effects including high gain monsters and smooth creamy overdrives, 14 mono and stereo delays and reverbs and 22 amp models including tube and solid state amps from Fender, Marshall, Orange, Diezel, and mesa Boogie. It’s safe to say, you’ll find it hard to get bored of this thing!
In 1941, CMI became the national distributor for National Dobro products. In ’42, Victor Smith, Al Frost and Louis Dopyera purchased controlling interest in the company. By this time, however, the world was at war and almost all instrument manufacturing ground to a halt as all segments of industry converted to production of materials to support the war effort. In October of 1943, with builders in wartime hiatus, the new owners changed the company name to Valco Manufacturing, incorporating the first initial of each partner’s given name (V-A-L-Co).
Though the line between the two is easily smudged, where multi-effects processors create a broad spectrum of effects, modeling processors can recreate the sound of particular instruments and amplifiers, like a Gibson Les Paul played through a stack of Marshall amplifiers, or a Fender Stratocaster played through a Fender Deluxe Reverb amplifier. A modeling processor offers you the ability to make your guitar and amp combination sound like whatever guitar and amplifier sound you want—even if you don’t own either guitar or amplifier. You are limited only by the number of models programmed into the modeling processor when you plug your guitar into one.
The list is leaving off some HUGE names. You absolutely cannot leave out Clapton and Van Halen. However, you apparent uninformed people saying that John Mayer shouldn't be on the list should wake up and get in your music. He is on track to waxing this whole list by the end of his career. Clapton is practically handing him the torch. But then again, I guess that Tiger Woods will never be as good as Jack to some.
Pickguards were white pearloid, or sometimes tortoiseshell, the neck used a string tree, and the all-around makeup of the guitar was bigger than later iterations — thicker necks, bigger and heavier bodies, larger fret markers. One obvious differentiator is the logo on the headstock; the earlier models, and even a few released as they moved into Phase Two, had a raised plastic “Univox” logo on the headstock.
My husband was looking forward to checking this place out. When we entered a guy wearing glasses asked if he could help us with anything and my husband said "oh just browsing." So we walked around some more. When we got to the electric guitar section, my husband saw a $2,000+ guitar he wanted to try. He took off his jacket so as not to scratch the guitar and SLOWLY picked the guitar from the wall hanger. The same guy earlier suddenly came up to my husband and said "You can't just pull it out like that!" My husband was surprised and had to ask what he just said?! I was as surprised. The clerk said "You can't just take it unless you are buying it." Really?! My husband said then you should have told me earlier when we first came in. We did not see any signs nor there's any lock on the guitar hanger. Why would you buy without trying it first?! That clerk probably thinks my husband don't have the money. They just lost a customer and a bunch of my husband's musician friends.
Purchase a more suitable microphone, if necessary. If you have found that your mic really doesn't capture sound the way you need, you'll have to research to find the right mic for your situation. For example, you might use a large diaphragm condenser mic to capture crisp, pop rock tones.[32] However, you should be able to achieve consistently good recordings with the use of either a common:
Most guitars will benefit from an annual setup, and instruments that are kept in less than ideal climate conditions (or that are on the road a lot) may need two per year. I’ll evaluate your guitar and make a recommendation. Setups may include truss rod lubrication and adjustment, saddle lowering to adjust action, nut slot adjustments, cleaning of grimy frets and fretboard, lubricating and tightening of tuners, and checking electronics and batteries. Price is based on what your guitar needs. The price range is for labor and does not include parts costs such as strings and bone nut and saddle blanks.
Due to the ever rising popularity of reverb, it didn’t take long for companies to figure out how to recreate the effect in early guitar amps. Have you ever heard of Spring Reverb or Plate Reverb? While to you these are just labels on a knob, back then these were real analog devices built into amplifiers. Needless to say, we have come a long way from using complex mechanical contraptions to create decent reverb.
Another Quality Ibanez Guitar ....This example is MODEL VINTAGE # V302 BS...And it IS A REAL GEM and it has a Premium German Sitka SOLID Spruce Top, WoW! what a nice original finish this one has...AAA Mahogany Sides-Neck & Back "see quality og the grain in the pics" . Lots of Full-and Wonderful rich tone from this baby. Its real ez to play & stays in tune well. It is a crafted in Japan guitar and it compairs favorably to Gibson, Guild or Martin! Please Note: If you prefer the guitar in Natural and not sunburst see our other listing for another V302 non sunburst we have in stock & available.. thank you for your interest, Joe .

Let’s start off with a guitar’s signal. As the driving force behind the entire effects chain, a guitar’s signal (more importantly, it’s voltage) must travel through the input cables and all of your effects pedals before it can reach the amp. As you can imagine, by the time a guitar’s signal finishes making its way all the way to the amp, the signal will undoubtedly suffer from a bit of degradation, losing its tone and body in the process. It's not your guitar's fault, it's simply the nature of electricity.
Just wanted to get back with a thank you note. I received the kit last week and installed it in my Stratocaster with Texas Special p'ups. It's absolutely brilliant. Not only is the Blend control a superb new addition to the tonal options, but the pots also feel so sturdy and smooth. Feels like I have some custom build now. Just amazing, thank you! In addition, the treble bleed mod is the icing on the cake. I’m no longer afraid to roll down the volume knob." - Andrei Custom Blender Mod for Strat®  

Just SOLD OUT sorry.... Another FRESH Release from the JVG Vintage Vault: Hey Mandolin lovers here we are proud to present a wonderful vintage 40 year old beautiful sounding and is absolutely gorgeous !!! She has chop too well preserved and well taken care of this is the more rare of the Japanese mando's you do see a lot more Aria's & Alvarez but less Ibanez lawsuit version of the famously popular Gibson F5 mando. Excellent workmanship and it's the solid spruce carved example she's in very good - excellent vintage condition with just a few blemishes and yet nothing to detract from its undeniable beauty. This beauty comes with its original hard shell case it's rectangular black tolex with brilliant plugs marigold lining, open its cas and wow she's really striking .... This Iis a rare one folks a must for the ibanez mando fan... Contact Joe: jvguitars@gmail.com.
One of the things that initially surprised me was that coincident dual-mic techniques, where the two mics are placed as close as possible to each other to minimise phase cancellation between them, actually appear to be more commonly used than single-mic techniques. John Leckie explains: "There's an amazing difference in the sound and colouration you get from adjusting the balance of each of the mics, and you can get radically different textures depending on your mix of the two."
Rickenbacker continued to specialize in steel guitars well into the 1950s, but with the rock and roll boom they shifted towards producing standard guitars, both acoustic and electric. In 1956, Rickenbacker introduced two instruments with the “neck through body” construction that was to become a standard feature of many of the company’s products, including the Combo 400 guitar, the model 4000 bass, and, later, the 600 series.

This guitar is perfect no matter if you’re a beginner or have been playing for many years. The design is vintage at its best, with a lovely soft V-shaped neck and great colors, namely Surf Green, Daphne Blue and Fiesta Red. This guitar has a very traditional look that most people like. True, some people would feel that it’s a little bit too mainstream, but others would reason that hey, if it’s good enough for everybody else, it’s good enough for me!
As you will see, our list embraces outsiders, trailblazers, outliers, and Eugene Chadbourne playing a rake. We don’t worship “guitar gods,” but prefer our axe-wielders to be resourceful, egalitarian, flawed, and human. We’re not drawn to Olympic feats of fleet-fingered athletics, unless they’re used for unique and exploratory ends. We see the mewling histrionics of Jeff Beck as tyranny instead of catharsis. The name Derek Trucks is practically alien to us.
Deco Tape Saturation & Doubletracker is a unique effects pedal that allows for a wide variety of tonal possibilities.  You can place Deco near the beginning of your signal chain and use the Tape Saturation as a light overdrive.  Or, you can place Deco at the end of your chain, use lower Tape Saturation settings, and provide your entire signal with the tape-like warmth, compression, and added low end harmonics.
In my opinion, I don't think this guitar is quite worthy of all of the rave reviews here, based on the thin sound. I bought this because my Zager needs to go in for new frets and I have to wait until May to get it worked on, and wanted to get something inexpensive to use in the meantime. This is a beautiful instrument, no doubt. The finish is stunning, it's very nicely made and ready to play out of the box, so on that level I would give it 5 stars. But soundwise, for me I'd say 2 and half stars. The bottom end is nowhere to be found. I tried to switch to the same strings I am using on my other guitar and it's no different. This guitar has about the same dimensions as my Zager, but nowhere near the same bass response. It'll do fine as

Hendrix was known for a lot of things.The beautiful chord embellishments on Little Wing, the grit of the solo in Voodoo Child screaming off of his strat pickups, his cover of the Dylan song All Along The Watchtower, and the backwards solo in Castles Made of Sand, but known as a great innovative guitar player over and over again. His short but explosive career influenced numerous artists for many years past his death and continues to influence musicians today. To make such a difference in such a short amount of time truly earns Jimi a spot as number two. But…then you may ask, “Who is deserving of number one?!”
{"product":{"id":"113206695","stock":"instock","price":"299.99","name":"Vintage 1960s Maxitone Bruno Sunburst Hollow Body Electric Guitar","download":false,"sku_id":"113206695","checksum":"83818118023","rep_id":"site5113206695","displayId":"113206695","sku_display_id":"113206695","sku_rep_id":"site5113206695","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Semi-Hollow and Hollow Body Electric Guitars","dept":"Guitars"}
A: If it looks like a ??? it almost certainly is a ??? Because the factory used to change the hardware at a whim there will be slight variations. This has, in most cases, nothing to do with a particular year but more to do with what happened to be to hand at the time. Some exceptions are pickups, pickguards, logos and headstocks. All I know is here on the website if you look hard enough. Also bear in mind that your guitar may have been modified at some stage in its life.
Muddy Waters is obviously one of the most recognized and influential blues artists of this century. When his name is mentioned phrases like "slide guitar" and "electric Chicago blues" are associated with it, but what about "wah-wah" and "psychedelic"? For a small period in history, Muddy Waters' image became one of a psychedelic icon and if there weren't records still around from then, most people would doubt it had ever happened. The sixties were a strange time for music and musicians- none felt stranger than musicians from the previous decade trying to stay afloat then. Many times in music, established artists will try to expand upon their work and take a chance with something different. They should at least be praised and encouraged when they try to experiment with their sound. If music were condemned to always following a strict guideline of rules, it would be pretty boring. Music should be allowed to grow and explore new territories because everyone can agree that it's not exciting if it's always predictable.
I cut my template with a jig saw and a fine tooth blade to make sure it kept a straight edge. Then i mounted it to the body blank using small screws in the ares that would be routed out later like the neck cavity area and where the pick ups would be. You will want to start routing a bit outside your line or the edge of the template so you can get you router bit to the depth it will need to be at for the ball bearing to follow the template. I use a 1/2"x1" bit with a ball bearing guide on top.I make several passes around the body, lowering the router 1/4" at a time for smooth easy cuts. Once you have made your pass were the bearing runs along side the template, it is much easier to rout and you will end up with a nice squared edge to the body.
In 1950, Leo Fender introduced the single-pickup Esquire, and a few months later released a dual-pickup version called the Broadcaster that, due to trademark issues, was later renamed the Telecaster. The Tele® would go on to become the world's first successfully mass-produced solidbody electric guitar. Simple yet elegant, it has been a show-stopper and session magnet since its debut. It’s the go-to guitar for twangy chicken pickin’ solos, which is why the iconic axe has appeared on the majority of country records over the past six-plus decades.
What? I have an early 90s pe and I've recorded with it and its one of the best guitars I've ever played. Beutifull clean lp tone and ballsy as when you dirty it up. I also have a pro 2 fullarton which with the fender lace sensor pups I put in it, plays and sounds as good as any strat I've played in thirty years. Check the new arias comming out of the states at the moment and they are really awesome looking guitars. There is also a reason the early ones are known as lawsuit guitars as Gibson though they were so good they had to sue them!
The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. Many believe this design improves a guitar's sustain and timbre. A few examples of string-through body guitars are the Fender Telecaster Thinline, the Fender Telecaster Deluxe, the B.C. Rich IT Warlock and Mockingbird, and the Schecter Omen 6 and 7 series.
×