I've been playing music my whole life, guitar since 16 (>30 years!!!). I'm used to distortion, delay, and some sort of phase for my unique sound. With this little devil, I make my guitar scream and whine like I'm playng straight from hell! Makes me sound almost as evil as I am in real life. For this DIYer, I have some good noise until I can build all my own pedals. Many presets, I only needed to modify two of the for my sound. Now i can sound like the true 80's hardcore punk and thrash metal songs and sounds that I grue up with.
Around the same time as the 700-800 series of guitars there was also a line of acoustics. The steel-stringed "Folk Guitars" featured necks and headstocks very similar, if not the same as, the electric models. The nylon-stringed "Classical Guitars" featured slotted headstocks with the curly logo squeezed into the middle. The acoustics seem to be pretty well-made and often fetch pretty good prices on Ebay. One reader of this site even found a Kent banjo made in Germany. The lettering of the name is the same as on the 700-800 series instruments without the curly thingie.
Next to the great sounds and looks, the most noticeable thing about Seagull guitars is the incredibly reasonable prices. With Seagull, you get a quality guitar made from superior woods and materials for a lot less than it seems like it ought to cost. The Performer CW Flame Maple is definitely one of the best acoustic-electric guitars under $1000 out there.
A one of a kind 6 stringed electric guitar that is right handed and mostly comes in black. The body is made of bass wood where as the fret board is made of maple. The neck also consists of white dot inlay. The product price ranges from about 15,350.00 which is quite cost effective considering the adorable features of the guitar. More information concerning the product can be found by clicking on the following link.
We all know the sound of this effect: It replicates varying degrees of the sound of playing your guitar in the gym showers, a cathedral, or Mammoth Cave, and it has proved itself one of the most atmospheric aural adulterations available. Since none of those locations is entirely gig friendly, however, our ever-handy techs have bottled the flavor in a reliable, portable form. This category covers both echo and reverb effects, since they are versions of the same thing. The term “echo” was used more often in the early days, and is sometimes used today to refer to the distinct and distant repeats of a signal, while “delay” refers to anything from the same, to the short repeats heard as reverb, to the complex, long, manipulated repeats of an intricate digital delay line. Either way, they are both really the same thing, just used differently.
At the end of 1931, Beauchamp, Barth, Rickenbacker and with several other individuals banded together and formed the Ro-Pat-In Corporation(elektRO–PATent-INstruments) in order to manufacture and distribute electrically amplified musical instruments, with an emphasis upon their newly developed A-25 Hawaiian Guitar, often referred to as the “Frying Pan” lap-steel electric guitar as well as an Electric Spanish (standard) model and companion amplifiers. In the summer of 1932, Ro-Pat-In began to manufacture cast aluminum production versions of the Frying Pan as well as a lesser number of standard Spanish Electrics built from wooden bodies similar to those made in Chicago for the National Company. These instruments constitute the origin of the electric guitar we know and use today by virtue of their string-driven electro-magnetic pick-ups. Not only that, but Ro-Pat-In was the first company in the world specifically created to manufacture electric instruments. In 1933 the Ro-Pat-In company’s name was changed to Electro String Instrument Corporation and its instruments labeled simply as “Electro”. In 1934 the name of Rickenbacher” was added in honor of the company’s principal partner, Adolph Rickenbacker. In 1935 the company introduced several new models including the Model “B” Electric Spanish guitar which is considered the first solid body electric guitar. Because the original aluminum Frying Pans were susceptible to tuning problems from the expansion of the metal under hot performing lights, many of the new models were manufactured from cast Bakelite, an early synthetic plastic from which bowling balls are made.[2]
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.
This is hands down THE BEST brand there is! Trust me, I've been playing guitar since I was a kid. I've had used, owned, and tried every guitar there is. Gibson is NO WAY better than PRS, the sound quality of a PRS is awesome! They are pretty light, the designs are awesome as well, although PRS is a bit more expensive than your average guitar it is worth every penny! Gibson's are way too over priced and would never match the PRS. I used to own a gibson sg and lp, and I sold them after I had my own PRS. If you really know the difference between a good and a great guitar you would pick PRS over any other brand. Period.

Guitar effects pedals offer a huge range of possibilities for guitar-sound manipulation―there are literally hundreds of pedals from scores of manufacturers. If you or someone you know is not completely satisfied with the clean, unprocessed sound coming from their guitar and they want to experiment with and modify or color that sound, a great way to tweak it is with effects pedals, also called “stompboxes.” An effects pedal, depending upon its configuration, modifies the sound of a guitar through electrical circuitry or digital modeling via computer chips, either giving it subtle color or dramatic shift. All pedals include knobs on the enclosures that allow the player to adjust the intensity, speed, depth, and shape of the effect in increments, from nuanced color to ear-splitting crunch.

Hi, it seems like the problem lies in your hands and not in the guitar itself. If you are a beginner, you must start slowly and build up strength in your hands. A good way is to simply buy a "stress ball" or other hand exerciser. A "Gripmaster" one that lets you work each finger individually, which can be very useful, they are available for about $20 at most music stores.


pedal bass fender stratocaster electric amp left handed guitar fender telecaster gibson les paul telecaster ibanez epiphone martin guitar fuzz prs taylor guitar gretsch electro acoustic guitar les paul gibson sg marshall stratocaster fender precision bass tokai rickenbacker free fender bass fender jazz bass resonator guitar 12 string guitar fender amp fender jaguar
Plug one in, and you'll understand what an acoustic instrument is supposed to sound like while playing live. Unplugged they sound great as well, especially the deep bowl models. I hear from my friends that they think those rounded backs feel awkward to play while sitting down. I have a deep contour bowl, that is way more comfy playing relaxed in my couch than even my little 000-martin.
The EB-28 bass was very similar to the guitar in appointments and controls. It had a 22-fret ebony fingerboard, 33.825″ scale, a DiMarzio P-style neck pickup and a DiMarzio J-style pickup at the bridge. It, too, carried a Schaller bridge and Schaller M-4 tuners. Around 4,854 each of these 28 Series guitars and basses were built between January 1981 and February 1982.
However, unlike a boost pedal, the overdrive effect is not dependent on the amplifier to have a distorted sound. The overdrive pedal will internally boost the input signal so much that the top of the signal wave will be forced to naturally shrink itself. This is called soft clipping and it simulates amplifier like clipping as though an amplifier was being overly driven, hence the name overdrive. The distortion pedal will also boost the input signal but will then add resistors within the circuitry to not just shrink or soft clip the wave form but completely flatten the wave peaks. This is called hard clipping. For more understanding on the differences between soft clipping and hard clipping see the illustration below.
A. Many professional musicians invest thousands of dollars in high-end guitars made from expensive and rare tonewoods. A $100 student guitar made from spruce is not going to produce that level of tonality regardless of the player’s skill level. As a beginner, your main focus should be on skills such as chord formation, fretting techniques, and basic scales. Improving tonality and performance are long-term goals.
Look for lyrics or chord changes. Many songs have guitar parts made up solely (or mostly) of chords. This is especially true for rhythm guitar parts. In this case, the tab may forgo typical tab notation in favor of a simplified list of chord changes. These chords are almost always written in standard chord notation (Amin = A minor, E7 = E dominant 7, etc.) Simply play the chords in the order that they're listed - if it's not noted otherwise, try playing one chord per measure, but if the changes don't sound right, listen to the song for the strumming pattern.
In the 2010s, virtually all of the sound reaching the audience in large venues comes from the PA system or sound reinforcement system, the huge speaker systems pointed at the audience. As well, in the 2010s on-stage instrument amplifiers are more likely to be kept at a low volume, because when band members have their onstage amps "cranked" to high volume levels on stage, this makes it harder for the audio engineer to control the sound mix and blend. For example, if a heavy metal bassist had two 8x10" cabinets and several 1x18" subwoofer cabinets and several thousand watts of bass amplifier heads, and these amps are set to a very high volume level, this bass player will be creating very significant onstage bass volume. If the sound engineer wished to turn down the bass in the PA/sound reinforcement system, this bassist's loud onstage volume would make it hard for this engineer to control and/or reduce the volume of bass in the FOH (Front of House) sound mix. Another issue that can develop with bass players who have very high onstage volume is that it can be hard for the audio engineer to produce a clean sound through the PA/sound reinforcement system. For example, if a bassist was driving her bass amp speaker stacks into clipping to create a fuzz bass tone, if the audio engineer wished to have a "clean" bass sound, this could pose a challenge.
Controls were volume and tone. A little elevated pickguard sat on the upper treble bout. The earliest examples of these had the little plastic logo on the head. By ’71, these had changed to an outlined block letter decal logo. A fretless version was also available by ’71. The U1970 with frets, and fretless U1970F, were both $220 with case. How long these were available is uncertain, but they were probably gone by ’73 or ’74.
For strumming, I've recently been using Virtual Guitarist Iron. They have a lot of similar strum types in each preset, but different enough that you can switch between them and it almost sounds like a real guitarist if you time it right and it is easy to use. They do a power chord type of strum. I also find if you run them through something like Guitar Rig, they sound a lot better also.
The Ovation Guitar Company founded by Charles Kaman based in the USA. The company primarily manufactures nylon-string acoustic guitars & steel-string acoustic guitars.These are the kind of electric guitars that are ideal for a recording in a studio and also great for stage performance. Their design incorporates, a wood top with a rounded, synthetic bowl shape instead of the traditional back and sides. CE44-RR is one of the most popular series of acoustic guitars produced by this brand. This is an expensive brand of guitars whose starting price is 31,555 INR approximately.

We tried adding treble to the acoustic guitar.. It sounds like a xylophone, only the highs are heard. Panning is a good idea. I remember doing it with several synthesizer tracks to make more space. Unfortunately we already have a compressor in the pedal-board and it doesn't help much. The dynamics are flat but the electric guitar is still screening the acoustic one even at a quite low volume. I guess it will still be so... whatever we do. I wonder how people manage 4 or more guitars all at once. – SovereignSun Jan 10 '17 at 9:28
Unlike most new wave guitarists at the dawn of the Eighties, Honeyman-Scott had impeccable fashion sense. He always maintained a timeless detached rocker look, and his aviator shades, medium-length shag haircut, suit jacket and jeans attire never really went out of style, unlike the geometric haircuts and DayGlo suits that many of his contemporaries wore. He always played the coolest guitars onstage as well, from classic Gibson Les Pauls and Firebirds to custom-made Hamers and Zemaitis metal-front guitars.
Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.

The best way of working out which contact is which is to use a multimeter and see for yourself which contacts are connected to each other in the 5 switch positions. On the Fender-type and some import-type switches you’re given a good clue because you can actually see the mechanism or see through the switch casing. Watch this as you move the switch through the 5 positions – you can see which contact is always in circuit (the wiper) and which ones are in circuit in each position (1, 2, 3, 4 and 5). This method of visualising the switch also helps when it comes to fitting the switch to your pickguard and getting it the right way around! Now, where does the wire from the bridge pickup go again…
I have a Montclair guitar, it sounds like I have an original but I have some questions. I purcahsed this quitar about 40 years ago. It is a dark brown archtop, with two cutaways and a pick guard like in the picture. On the top of neck the only says Montclair, strait across, and on the back it says "steel reinforced neck". On the inside the only number is L 6089.
The top is made from spruce and features X-bracing, while the back and sides are made from basswood. The FA-100 also sports a very playable maple neck, with a rosewood fretboard and 20 frets. It would work very well for beginners, as it provides a defined, crisp sound that’s well suited to plucking or strumming, and good for everything from rock to country.
I’m not sure if you’re right about Joe being wrong. My memory of exactly how tone controls are usually wired is kind of failing me, but I think I remember that what you’re saying would be true if the output was taken from the node connected to the capacitor, but it’s not–the output node is the node on the opposite end of the tone pot from the capacitor, unless I’m remembering wrong. I think that filter-characteristics of guitar tone circuits are easier to visualize if you imagine them as reacting to a current source. Meaning “a big resistor in series with a capacitor” reacts the same way that “a big resistor” does. Basically, current above the cutoff frequency is shunted to ground through the tone pot–so if the tone pot is high, very little percentage (compared to if it was just a capacitor) of this current gets shunted, whereas if the tone pot is low, a high percentage gets shunted.
Our basic no frills guitar Denny designed to go head to head with $1000+ guitars. Magazine reviews and customer testimonials say it actually outperforms many well known $1500 models. If you want the look, feel and sound of a high dollar acoustic with 50% easier playability this is the best guitar we offer. Shipped wholesale direct from our workshop in Lincoln, Nebraska. 100% money back guarantee, lifetime warranty.
The twelve-string guitar is a simple variation of the normal six string design. Twelve-string guitars have six regular strings and a second set of thinner strings. Each string of the second set corresponds to the note of its regular string counterpart. The strings form pairs and therefore you play a twelve-string guitar in the same manner as you would a standard six-string.
GUITAR RIG 5 PLAYER is the free, modular and expandable effects processor from Native Instruments, combining creative effects routing possibilities with ease-of-use and pristine sound quality. The included FACTORY SELECTION library provides one stunning amp with 17 cabinet emulations, plus 13 effects and sound modifiers to shape and enhance any audio signal. 

Unlike the piano, the guitar has the same notes on different strings. Consequently, guitar players often double notes in chord, so increasing the volume of sound. Doubled notes also changes the chordal timbre: Having different "string widths, tensions and tunings, the doubled notes reinforce each other, like the doubled strings of a twelve-string guitar add chorusing and depth".[38] Notes can be doubled at identical pitches or in different octaves. For triadic chords, doubling the third interval, which is either a major third or a minor third, clarifies whether the chord is major or minor.[39]
In a way, the Ovation story (to use Robert Frost’s famous metaphor) is one of roads not taken. Of course, as the philosopher, Hegel, so neatly noted long ago, the paths tend to join up again, and the resulting synthesis works out fine in the end. It certainly worked that way for Charlie Kaman, whose choice of paths ultimately led to the synthesis (in more ways than one!) of Ovation guitars.

So you decided to play electric guitar. Once you get a guitar and an amp, the next step is to explore effects. Effects pedals can be separated into groups based on their functions. Understanding the different pedal groups is the key to getting the best sound when chaining them together. The largest pedal group is probably overdrives and distortions, and BOSS currently makes 16 different pedals in this category.
Taylors are okay as guitars go, but... I've owned three, sold them all in mint condition and lost considerable coin in doing so. I think they belong on this list because they charge hand made prices for MASS PRODUCED guitars. Don't believe me? Take the Taylor that you own and do a search for it on eBay. That's right, at this very moment there are hundreds of guitars just like yours for sale on eBay. And that's only checking this one sales venue! These guitars are worth half of what you paid because the market is saturated with them. Taylor cranks out hundreds of them per day and 100's of thousands per year. If you're shopping and seriously considering a Taylor, you can get comparable quality and far better value elsewhere. Choose carefully and you'll see your investment go up in value. Aside from some special, collectable models of Taylor, you will loose money on this brand.

Note: All versions and platforms of Rocksmith are compatible with the Real Tone Cable. It is a required 1/4-inch audio jack cable necessary for Rocksmith to detect and respond to your guitar playing. All versions of Rocksmith include the Real Tone Cable in the box, except downloaded versions and the Rocksmith 2014 Edition "No Cable Included" Version.
Semi-hollow guitars can be seen in the hands of many guitarists who have especially signature sounds. For example, John Scofield has been playing the same Ibanez AS-200 since 1981! Larry Carlton helped define the sound of the ’70s as one of the top call session guitarists of all time, and did it with his Gibson ES-335 (in fact, Carlton is known as Mr. 335). John Lennon, Gary Clark Jr., Jack White, Dave Grohl — guitar titans past and present use semi-hollow guitars.

Vacuum tubes (called "valves" in British English) were by far the dominant active electronic components in most instrument amplifier applications until the 1970s, when solid-state semiconductors (transistors) started taking over. Transistor amplifiers are less expensive to build and maintain, reduce the weight and heat of an amplifier, and tend to be more reliable and more shock-resistant. Tubes are fragile and they must be replaced and maintained periodically. As well, serious problems with the tubes can render an amplifier inoperable until the issue is resolved. In the 2000s, high-end tube instrument amplifiers (along with a small number of hi-fi power amplifiers used by audiophiles and high-end studio microphone preamplifiers) survive as the few exceptions, because of their perceived sound quality.
I think I understand the value of not being tied to those things so your own technique can flourish -- not relying on anything, really. I think that it's cool to keep an eye on your purism sometimes. I'm glad I can pick up an acoustic guitar, and if it's not sounding too good, I just put it into a tuning until it does. I also have an appreciation for the almost novelty factor of being able to hit a couple of switches and go from one amp sound to another.
{"pageName":"[gc] vintage: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
One of the first solid-body guitars was invented by Les Paul. Gibson did not present their Gibson Les Paul guitar prototypes to the public, as they did not believe the solid-body style would catch on. Another early solid-body Spanish style guitar, resembling what would become Gibson's Les Paul guitar a decade later, was developed in 1941 by O.W. Appleton, of Nogales, Arizona.[27] Appleton made contact with both Gibson and Fender but was unable to sell the idea behind his "App" guitar to either company.[28] In 1946, Merle Travis commissioned steel guitar builder Paul Bigsby to build him a solid-body Spanish-style electric.[29] Bigsby delivered the guitar in 1948. The first mass-produced solid-body guitar was Fender Esquire and Fender Broadcaster (later to become the Fender Telecaster), first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster.[30] Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and more comfortable ergonomics than other models.
The Wire. You'll see a lot of vintage spec wordings bounced around here and that pretty much boils down to the aesthetics. Those early Fenders and Gibsons we all know were wired at the original factories with a cloth covered 'push back' wire, whereas as some modern factories, far east predominantly use standard plastic coated wire today. But the important detail is the 'AWG', or American Wire Gauge. Widely used in the guitar world for optimal results, is 22AWG wire. I would go into detail on this, but THIS site has some superb facts about AWG, which if you'd like to find out more I'd recommend a read of! So back to the cloth/plastic thing. Personally, the 'push back' cloth wire is much easier and tidier to work with and I fully hold my hands up to saying it looks much better too. I always use this for any guitar wiring, the results are always great and it's a pleasure to wire up with. I personally use 22AWG copper, solid core wire, great to work with and consistent. 
I've met and talked to Andrew as his shop is 20 minutes from me. When you talk guitars to Andrew, you will get the feeling that this man knows his guitar building. He strives for perfection in his small WV workshop. There is plenty of evidence seeing some of his production models hanging on display. His quiet voice belies his guitar building abilities. As a luthier, his personal hand made guitars command a big price tag. But when you understand how he builds them, you'll understand why. One day, I'll own one his creations from his workshop. But until then, I'll just drool over the pictures. Not sure why his production models are rated at 42 though.
Now, you said that most people you see just crank the tone knob to the maximum and leave it there. That’s fine, and some genres of music actually have no need for a tone control. Heavy metal and hard rock and their derivatives have almost no need for tone control. Guitarists either keep the tone knob wide open and never touch it, or they just buy a guitar that don’t have a tone knob (nor a neck pickup). Guitars made and designed for metal are built this way. I think a lot of country musicians also keep the treble wide open to get that biting shimmery single coil tone.
Engineers invented the first loud, powerful amplifier and speaker systems for public address systems and movie theaters. These large PA systems and movie theatre sound systems were very large and very expensive, and so they could not be used by most touring and gigging musicians. After 1927, smaller, portable AC mains-powered PA systems that could be plugged into a regular wall socket "quickly became popular with musicians"; indeed, "...Leon McAuliffe (with Bob Wills) still used a carbon mic and a portable PA as late as 1935." During the late 1920s to mid-1930s, small portable PA systems and guitar combo amplifiers were fairly similar. These early amps had a "single volume control and one or two input jacks, field coil speakers" and thin wooden cabinets; remarkably, these early amps did not have tone controls or even an on-off switch.[1] While we do know that these late 1920s portable PA systems were used by guitarists and singers, it is not known whether upright bass players used these PA systems.

While there's nothing necessarily wrong with plonking your mic right at the centre of the speaker cone if it gets what you're after, a lot of producers take the time to experiment with different positionings off axis, where the sound is typically warmer. Mike Hedges: "Depending on where you have [the mic] — outer speaker or inner speaker — you get the difference in tone from the edge of the speaker and the centre of the cone." In fact, Mike Clink also tries small changes in position even when working with basically on-axis sounds. "I'll point [the SM57] exactly dead on, though I might move it an inch or two to get the right sound."
Clipping is a non-linear process that produces frequencies not originally present in the audio signal. These frequencies can be harmonic overtones, meaning they are whole number multiples of one of the signal's original frequencies, or "inharmonic", resulting from general intermodulation distortion.[34][35][36] The same nonlinear device will produce both types of distortion, depending on the input signal. Intermodulation occurs whenever the input frequencies are not already harmonically related. For instance, playing a power chord through distortion results in intermodulation that produces new subharmonics.
Use of audio feedback to enhance sustain and change timbre. Feedback has become a striking characteristic of rock music, as electric guitar players such as Jeff Beck, Pete Townshend and Jimi Hendrix deliberately induced feedback by holding their guitars close to the amplifier. Lou Reed created his 1975 album Metal Machine Music entirely from loops of feedback played at various speeds. A good example of feedback can be heard on Jimi Hendrix's performance of "Can You See Me?" at the Monterey Pop Festival. The entire guitar solo was created using amplifier feedback.[26]
Guitar tabs (which is short for tablature) is a type of musical notation for stringed instruments that show you which fret to play on each string, as opposed to standard staff notation, which shows you the pitch of a note. Beginner guitarists have a much easier time learning from tablature, but in the long run, it’s a good idea to learn the standard musical notation as well.
Looper – A time-based effect that records a “phrase” of your playing and loops it back repetitively. These phrases can play sequentially in a song-style format or overdubbed to create dense layers, as used by one-man band style performers, vocalists to beatboxers. Larger loop pedals have more than one pedal for multiple tracks and allow you to add in-built effects to your loops. Remember: If you want to record your chain of effects pedals, make sure your loop pedal is always at the end of effects chain.
An amazing electric guitar player pack that is suitable for use by beginners. It has a mahogany body, with its fret board having been made from rosewood. The neck is also made from mahogany. Most interestingly, it comes with passive fienzo pickups, and an exclusive guitar player pack with gig bags, strap, cord, tuner, and an instructional DVD. It is well design to assist the beginner to better access the frets and practice through to perfection. Prices range from INR 12,650. Find it on the link below:
I have tried many different wiring schemes as well, with 3-way switching, 3-way with coil taps, and even bypassed the tone control (since I never dial back the tone in my playing anyway). I have played this guitar through high-gain amps (Carvin V3, all three channels, Carvin Vai Legacy), through VOX AC15, Vox AC30 (both with Greenbacks and with Celestion Blues speakers), and an Orange 2x12 combo. In all of these excellent amps where my Carvin SC90 guitar sings and sparkles and does whatever I want it to, this Frankenstrat with Duncans or with Carvin P'ups sounds like a fart after 12 glasses of cheap Charles Shaw wine.
In 2010, Gibson USA released the Slash “Appetite” Les Paul Standard as a tribute to Guns N’ Roses‘ debut album, Appetite for Destruction. It resembles the original Les Paul Standards of the late 1950s, including the 1959 Les Paul replica Slash used for the recording of the album. It has a maple top with a nitrocellulose Sunburst finish, rosewood fingerboard with acrylic inlay, and a Slash headstock graphic. It also features Slash’s signature Seymour Duncan pickups.[40] The Gibson Custom Shop introduced the Slash “Appetite” Les Paul Standard. Production was limited to 400, with 100 guitars hand-aged and signed by Slash himself, and another 300 finished with the Custom Shop’s VOS process.[41] Epiphone issued a more affordable version of the “Appetite” Les Paul, production of which was limited to 3,000.[42][43]
{ "name": "Jet Blue Burst", "skuUrl": "/Ibanez/Artstar-AS153-Semi-Hollow-Electric-Guitar-Jet-Blue-Burst-1500000032799.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "12-13-2018", "price": 999.99, "isOnSale": false, "msrp": 1377.76, "salePrice": 999.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $49 back in rewards Valid through,999.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "999", "decimalValue": "99", "listPrice": 999.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 377.77, "discountPercentage": 27, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000032799", "shipToStore": true, "displaySku": "H91419000002000", "displayId": "1500000032799   POS #: 113004634", "serialized": false, "stickerDesc":"Top Rated", "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/H91419000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Artstar-AS153-Semi-Hollow-Electric-Guitar-Jet-Blue-Burst/H91419000002000-00-140x140.jpg", "styleImgAlt": "Artstar AS153 Semi-Hollow Electric Guitar Jet Blue Burst", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"637145126000", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Available Now" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
These guys are great! I took my Martin in for a refret, and it might have been the cleanest I have ever seen it done. Played better than it did when I got it. So after that show of quality work I took... my old Guild to them. It had developed a little belly bulge and warped top. Mark got that thing sounding and playing like brand new. They are priced honest and fair, and do work in a very timely manner. I am done looking for my guitar shop. I highly recommend these gentlemen. See More
Where can you find one? My guess is that FIDELITY was a housebrand (like Holiday or Silvertone), and these might be Valcos or some other maker. But I have since seen 2 or 3 of them on Ebay, not going for too much money. Also, there are several other brands (and no-brands) that look much like these, so keep your eyes peeled, don’t pay too much, and score a little gem that will have other guitar players saying “what the hell is that” and have your significant other shaking his or her head when the UPS/Fedex people come knocking.
If you’re new to the world of guitar or bass, a looper pedal is a great way to hone your skills. A looper pedal is not an effect, but more a tool that allows you to record chord progressions, notes or riffs and then play it back through your amp. It’s ideal for playing a chord progression or rhythm section, looping it and then playing a lead line or riff over the top – like two guitars playing together.

At least one other Teisco guitar was available from around this time in the ’50s, probably slightly later on � another mini Les Paul that was the ’50s piece de resistance, the J-5. The J-5 was a single-cutaway solidbody that went beyond the other more derivative LPs. This had a slightly elongated body shape, with less pronounced waist than a traditional Les Paul. The upper bass bout headed toward the neck with a more angular, almost pointed corner rather than the typical rounded shoulder. The cutaway horn was also more angular, heading out at almost a right angle to the neck. It’s impossible to tell from the photograph, but this looks to be a glued-in neck. The fingerboard was bound, and featured the typical large white dots with two small dots at the octave. The headstock was a white-faced asymmetrical affair, with a curved peak extending on the bass side, with a concave dip across the top. Tuners had white rectangular buttons. These would be interesting enough, but the body had a bound flamed maple top � flat, not carved. The pickguard followed the body profile, with an extension down the lower side for the volume and tone controls. On the black pickguard were two black-covered pickups, looking sort of like P-90s. Pickup selection was with a chicken-beak rotary three-way switch. Knobs were white knurled with silver top rings. The bridge was a typical adjustable wooden type. Again, a large tailpiece assembly allowed the strings to pass through the body. This is a very beautiful guitar.
Just SOLD OUT: here is a great sounding wonderful 43 year old Vintage Japanese OOO guitar in excellent vintage condition. We have already set her up with our Martin Bone Nut & Compensated Saddle and action is dialed in to Martin specs. We also upgraded the original plastic bridge Pins to SOLID Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic if not familiar with the Morris brand thats ok many are not, I have know of these for 2 decades now many of these were made in the Terada factory in Japan... another name you may not have heard of none the less they are know to make the highest end guitars in Japan in those days and also today, for makers like Ibanez virtually all of their top end guitars like Musicians - Artists - George benson GB line and the old Aria L-5's and Ibanez L-5's and many others continuing on today in that great Custom Shop tradition. This is one of them and is very well constructed with top workmanship and fit and finish build quality is comparable to a Martin- Taylor_Gibson and so on... that is to say no worries this guitar Morris has an excellent pedigree. Guitars of great playability and great sounding what more do you need?.... This guitar was built from wods aged at least 20 years at time of build that was over 40 years ago and just look at its condition to this day... it has truly stood the test of time. See for yourself... it this price range a wonderful classic 000 style Japanese true Vintage guitar in its own right. Great Value and great fun Japanese vintage collectible. For a song. .
The fact that there are a lot of us belies a truth about learning guitar: It’s kind of frustrating. Unless you’re moving to guitar from some other kind of musical training, there’s a lot to adjust to right out of the gate. While a piano can sound reasonably good if you simply press a key, playing that same note on a guitar requires you to hold both hands the right way, situate the guitar properly, and make sense out of holding a pick.
Ok I know Hondo? .... But this is a good one folks its got a lot going for it really have a closer look, its actually built well it is a beautiful vintage guitar in its own right its condition and patina good looks good sound and easy playability make it an excellent entry or back up choice into vintage guitars, The Top appears to be solid 2 piece center seam spruce top you see grain going from top to bottom with really beautiful straight grain with flame type figuring that is surprising on a Hondo it's unique in that feature and it has that patina I love it caught my eye big time as I got close I couldn't believe it was a Hondo, it's logo has that same font as old Martin & Takamine used this one has the look and feel, but it's action was a little off spec , so I fixed all that it has great action now it's neck set and angle was excellent and I ended up changing its nut & saddle out for Martin born nut & saddle set and a new set of 80/20 strings, this guitar has good volume and sweet tone it rings clear and true with good intonation. It's in very good to excellent vintage condition, it's body & neck has no cracks , no finish checking and still shines like glass it's beautiful just have a look, it's not new or mint it has a couple drinks on its top and a couple on its back too but besides those it's exceptional vintage and plays easy with good low action with plenty of saddle left to lower more down the line of ever needed it's set up to meet or exceed Martin specs for playability. This is a lot of vintage guitar for this kind of price WOW! .
Virtually all headphone amps offer a full menu of distortion, EQ, reverb, and a host of other digital effects, many of them simultaneously. So a headphone amp can usually double as a multi-effects processor, which is quite cool. Headphone amps also provide numerous presets — sounds preprogrammed by the manufacturer — plus full stereo sound (especially effective over headphones).
Some bonehead really put the WRONG pickups in a guitar you just bought. So you bought a sweet vintage Strat from a guy who put P-Rails in it because now it can get "any tone".  He failed to mention that all of those tones kinda suck.  Hey, you just want a great sounding STRAT!  Drop in the right vintage Strat pickups and you'll be there baby'.  Then off-load those jack-of-all-trades tone-suckers to some idiot who actually believes one weird pickup can nail EVERYTHING.
Altium is known for it’s high end PCB development application called Altium Designer which starts at around $7000 and there’s a yearly subscription fee too. Gulp! Altium Designer is used by many industry professionals for product development. Altium just recently released Circuit Maker, which has many of the features of Designer and is, Gasp!…. Completely free!  The trade off at this point seems to be that it’s designed around a community and apart from a couple of private slots, you have to share your work, so it’s not very useful for completely proprietary projects.
Very difficult guitar to put down. I was browsing local guitar shops, looking for a deal on a used MIM Stratocaster, just to have, I'm an SG man. This guitar caught my eye and the store owner was kind enough to allow me a little play time with this visually stunning guitar. I think I was expecting another copy of Fender's Stratocaster, given the shape and three single coil pickups. From the first strum I knew this was something different, tonally like a cross between a Strat and a "Rick". That's a very big deal. Finish was excellent and setup close to ideal for me, so I wound up with a new guitar for roughly what I expected to pay for a used model. Getting home I immediately ran through my amps, trying to find something to complain about. I'm lucky to have a few tube amps known for excellent clean channels. This is my preference, and this guitar does not disappoint. Think 60s Ventures, dripping with reverb. Yeah! Overall this guitar gives a great range of tone, is comfortable though just this side of heavy and seems to be very well made. Moderate use of Leo Fender's brilliant trem doesn't seem to effect tune. The guitar came strung with 9s, though I've since moved to 10s, my personal preference. And it fits a Strat hardcase perfectly. To be crystal clear, this guitar doesn't replace any of the legends, such as my beloved SG's or Strats. Instead, it provides a beautiful and unique enhancement for guitarists that favor those instruments.

I played a gig (to an empty house) at The Haunt in Ithaca NY. A lot of up and coming regional bands play there. We, on the other hand are just a cover band from Binghamton, about an hour away. While setting up, the sound man left a mic on the floor where I’d be setting up. I let him know that I send a direct signal. I could tell he wasn’t happy. After the gig though, he came and complimented me on my sound, saying that he didn’t expect a direct sound to be that good.

The PAL Promise is about giving you an unparalleled shopping experience. We want you to be 100% satisfied with every purchase you make from us. We're committed to not only meeting, but exceeding your expectations. We strive to create a lifelong relationship with you and your music, by delivering the best gear in the business at unbeatable prices, top notch tech support, outstanding customer service and a secure safe checkout process. Click Here To Learn More...
You are likely to encounter phase issues when you have the same sound hitting a microphone from two different positions. The more mics you use or the more distance is put between mic and speaker in a reflective room, the more likely this will occur. The result is an effect called “comb filtering,” which cancels out certain frequencies and emphasizes others, creating an odd sound. Part of the reason for using distant-miking techniques is to obtain some “room sound” in the tone, which is created in part by such reflections, but at times these will have an adverse affect on the focus and solidity of your guitar sound. If a distant position with just one mic is sounding considerably more thin, loose, and washy than a close mic on the same amp, move it around, experiment with other locations, and see if you can eliminate these issues through mic placement alone. Otherwise, consider using a baffle or two to shield the mic from specific reflective surfaces.

In launching the AZ series, the goal was not to merely create a completely new guitar model, but to sculpt a great guitar that can foster the potential of the modern ?third phase' while maintaining traditional elements. Even though Ibanez is thought of as a modern guitar brand, it has decades of accumulated knowledge and a history of pushing the boundaries. The AZ series carries with it all of the hallmarks of these tried and tested Ibanez qualities. The harmonic balance between bridge and ...

The "Slide Guitar Extension Nut" presents a bad case of convenience to the manufacturer (only having to make one size) disguised as a convenience to the customer (pretending one size fits all). This thing is not very versatile. With an outer string spread of 1.75", it's made for a wide guitar neck so if yours is only average, the outer strings will be suspended off to the sides of the overall width of the neck. That's not insurmountable but it's also not something every budding slide player wants to tolerate.

Dr Doug Clark-"I stumbled onto your site while looking for an entry-level classical guitar for my grandson in Denver, Colorado. Regrettably, I'm not resident in England (though I've been there many times), otherwise I'd be on your doorstep tomorrow morning. That said, might you have any acquaintances in America (firms similar to yours) whom you could recommend? We're limited at this point (8th form next year, at Denver School of the Arts), to around $300 US. Any advice or recommendation you can offer will be greatly appreciated. Watched Harry and Meghan's wedding twice! Wish them both, and England itself, a wonderful decade ahead. PS: I took up steel string acoustic guitar at about age 60. Hence my email "handle". Still working on my skills and loving it."

Most of the better machine heads on the market these days use a standard .375" headstock hole, so swapping tuners isn’t that hard to do. The problem comes with the mounting at the rear of the peghead. Luckily, if you use the type that screw down from the front side with a nut and washer, you can swap and test before you drill additional mounting-screw holes.

I have an old Zoom 505 all in one pedal plugged into the clean channel of my Peavy Scorpion 2-12 amp. I’m using the distortion, chorus, reverb, delay, etc. programmed from my pedal. I want to add my Crybaby wah so it’s just a matter of easily just switching the order of both pedals and see what works best. Until I upgrade, it should be simple. Here we go. Thanks.
The Fender Bassbreaker 15 Amplifier Head presents a budget friendly option for those in need of great tone. You have 15 watts of pure power to channel here as well as a studio friendly Power Amp Mute so you can record straight into a desk - a great feature for those in need of a powerful stage and studio amplifier. This is a professional grade amplifier head that features 3 very unique tonal options and overdrive levels to provide you with a whole host of lush fender tones that range from glass like cleans to vintage overdrive. Perfectly paired with the Fender Bassbreaker 212 Guitar Cab.
Music enthusiasts can find a wide range of new and used guitar amplifiers on eBay, often for deep discounts.  Buyers who want to explore a wide range of possibilities should simply enter the keywords "guitar amplifier" into the eBay search bar, while those with more particular needs can refine their search by adding keywords associated with the make and model of the amplifier, as well as its color or condition.  The "ask the seller a question" feature will enable the buyer to ask additional questions pertaining to style, sound, and condition (if the guitar amplifier is used).
Blend potentiometers (essentially two potentiometers ganged on the same shaft) allow blending together two pickups in varying degrees. The operation is the same as in a balance control found in stereo equipment – in the middle position (often marked with a detent) both pickups supply their full output, and turning the pot in either direction gradually attenuates one of the pickups while leaving the other at full output.[13][29]
For easy, go-anywhere amplification, start out with a combo guitar amp. These all-in-one units combine the preamp, power amp and speakers into one piece, which makes them ideal for places where you want to set up and tear down in a hurry. Rehearsals and busking are easier with a combo amplifier, and they're great for small venues that don't need the power of a larger amp. The combo is your basic, high-versatility amp, and no guitarist should be without one.

"Soft clipping" gradually flattens the peaks of a signal which creates a number of higher harmonics which share a harmonic relationship with the original tone. "Hard clipping" flattens peaks abruptly, resulting in higher power in higher harmonics.[37] As clipping increases a tone input progressively begins to resemble a square wave, which has odd number harmonics. This is generally described as sounding "harsh".
I was interested in this book, and almost walked away after reading many negative reviews which complained about black and white photos and numerous typos. Then I noticed it was available in a Kindle version, for only $9.99. I ordered the Kindle version, and have no regrets. I have read it on my iPad, and gleaned a lot of useful information from it. I have not encountered any typos, and the colored wiring diagrams and numerous photos are just fine. It seems that the paperback version suffered from a poor layout and printing job, which is a shame, since it is obvious to me that Mr. Swike put in the effort to make a good product, which the Kindle version surely is. Anyone interested in a simple but comprehensive intro to wiring their Strat/Tele/Les Paul will find this a good reference. I also enjoyed the Varitone circuit presentation, and the explanation of how capacitor values affect treble/bass response.
One of the most popular and widespread pickups in history is the single-coil, played by more legends than we can count – from Jimi Hendrix and Eric Johnson, to Jeff Beck and Yngwie Malmsteen. Renowned for their delightfully bright and clear tone, the single-coil is exactly as the name describes – a single set of magnetic pole-pieces, wrapped in a thin wire coil. Simple in design, but complex in their sound, with exceptional dynamics, sparkling highs, and huge twang. They are great for all styles of music, from classic rock to country. Generally found on all kinds of models from a huge range of brands, single-coils are famously the exclusive pickup on both Fender Stratocasters and Telecasters. The DiMarzio DP419 Area 67 is a good example of a great single-coil pickup and a must for Hendrix fans, although check our dedicated single-coil category for more.
Gibson filed a lawsuit November 18, 2010 in Federal court, the Central District of California, against WowWee USA and their Paper Jamz battery operated guitar toys charging trademark infringement.[27][28] The lawsuit claimed the Paper Jamz toy guitars copied the looks of some of Gibson’s famous guitars, the Gibson Les Paul, the Gibson Flying V, the Gibson Explorer, and the Gibson SG. On December 21, 2010 Gibson was granted a request for an injunction against WowWee and retailers in the United States which were selling Paper Jamz guitars: WalMart, Amazon (company), Big Lots stores, Kmart Corporation, Target Corporation, Toys “R” Us, Walgreens, Brookstone, Best Buy, eBay, Toywiz.com, and Home Shopping Network (HSN)[29][30][31] The case was dismissed with prejudice (dismissed permanently) January 11, 2011 by Federal Judge R. Gary Klausner.[32][33]
Imagine someone telling you about an old-time music store that had a huge stash of unsold guitars from the 1960s, plus some guitar effects from the ‘70s lying around in its upper floors in Newark, NJ. Well, you can bet it didn’t take long for me to beat a path to the door of Newark Music City (calm down; this was a long time ago and, while the company still exists, it’s long gone from Newark). Even though I was late in the game, there were still unmined treasures to be had. A real Temple of Doom!

Once you've mastered the intricacies of single-transducer miking, it's fun to start working in stereo. For true stereo recording, you need a matched mic pair as well as a twin-speaker amplifier, preferably one with built-in stereo chorus and vibrato (such as a vintage Magnatone or a Roland Jazz Chorus). Two separate amplifiers fed by the same stereo delay or multi-effects unit will also work.
Acurious phenomenon that ac-companies certain guitar compa-nies is an inability to translate success from one medium to another. For instance, Martin has never been able to transfer its reputation for high-quality acoustics to electric guitars. And Fender has never been able, on its own, to really succeed in marketing acoustic guitars. Instead, it purchased Guild.
Two new models that would eventually become mainstays joined the Teisco line in ’65. Theye were two double cuts with slightly more flared horns, in a sort of tulip shape. Both had a single, wide, chrome-covered pickup with poles exposed along one edge. This was similar to the old MJ-1 but by ’65 would become the new SM series. Both had bolt-on necks with bound rosewood fretboards and the top-edge rectangular inlays. The E-100 had a bridge/tailpiece assembly, volume and tone on a small pickguard, and one of the elongated Strat-style heads. The ET-100 had a platform vibrato. As a sign of things to come, the Teisco Del Rey ET-100 had a regular Strat-style headstock, the first to appear on Teiscos, as far as I’m aware.
This guitar master knows wood. He understands its rhythm. He's a master woodworker and began building acoustic guitars when he was a child. "I couldn't afford the ones I wanted," he says, "so I built them." Perretta Guitars is the result of his experiments. But it wasn't until he toured with the guitars that he'd receive some of the best advice of his life from George Gruhan, a guitar master in Music City, whose customers included Eric Clapton, Neil Young, Johnny Cash and George Harrison: "If you want to work in this business, do repair work."
Many people "re-amp" direct guitar tracks recorded to a DAW using amp-modeling software, with good results. Plug-ins are wonderfully suited to the virtual  recording environment, allowing for fast access to a plethora of modeling amplifier and speaker cabinet combinations, hence tones, effectively replacing a roomful of amps, cabs and microphones. Programming the virtual amplifier is the same as tweaking the knobs on the real thing, and the same is true for programming software dynamics and effects processors in relation to their hardware equivalents. As the realism and sophistication of modeling technology continue to develop, so does the viability of virtual re-amping as a production technique.
The core metal used for strings is an important variable to consider.  Not only does the string core affect tone, but it affects the tension strength as well.  The heavier the string gauge, the stronger the core metal needed.  You don’t want premature string breakage, especially during a gig.  Your options absolutely depend on the tone you desire, but they also depend on the string gauge you prefer for the genre of music you play.
Whether you're recording or just plain playing for the fun of it, a headphone guitar amp is a great thing to have. You can even choose headphone amps that will work with pedals, mixing consoles and other connections, giving you a ton of versatility in how you use them. If there's one thing that's universally true about these amplifiers, it's that no guitarist should be without at least one.
hey guys im just curious as i just got back from a music store that had to basses from two different brands (local luthiers) and they were virtually the same (5 string, j pickups, Aggie 3 band mahogany body, set neck) the only difference was one had a alder tone block, i personally couldn't hear a difference but the owner of said shop said tone wise it makes a huge difference, any thoughts?
Living Colour’s Vernon Reid agrees but also speaks to a larger shift. He remembers being inspired when he heard Santana on the radio. “There was a culture of guitar playing, and music was central,” adds Reid, 58. “A record would come out and you would hear about that record, and you would make the journey. There was a certain investment in time and resources.”
When jazz guitarists play chords underneath a song's melody or another musician's solo improvisations, it is called "comping", short for "accompanying" and for "complementing".[citation needed] The accompanying style in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In many popular styles of music, such as rock and pop, the rhythm guitarist usually performs the chords in rhythmic fashion which sets out the beat or groove of a tune. In contrast, in many modern jazz styles within smaller, the guitarist plays much more sparsely, intermingling periodic chords and delicate voicings into pauses in the melody or solo, and using periods of silence. Jazz guitarists commonly use a wide variety of inversions when comping, rather than only using standard voicings.[3]
When it comes to buying an electric guitar there are a lot of options available, and choosing one can be confusing. This guide will help you understand the basic differences in electric guitars so you can make an informed decision. And remember, we’re here to help with friendly Gear Heads available at 1-800-449-9128 who can guide you to the electric guitar that best meets your needs.
Gretsch was founded in 1883 and started out making banjos - it wasn't until the 1930s that they began producing guitars - but during the 1950s their guitars began to take on legendary status. During the 1960s their popularity hit stratospheric levels because George Harrison was playing a modified 1957 Gretsch Duo Jet that he bought second hand for £70 from a ship crew member in Liverpool who had bought it brand new in New York. Most collectors agree that the 50s & 60s are the most sought after Gretsch guitars.
Greg's Vintage Guitars Atlanta ,"we sell keepers",The Vintage Guitar News and Views.....vintage guitars for sale ,Atlanta georgia.Vintage guitars ,players guitars cool affordable,rare,vintage and collectible guitar and gear sales,the obscure and under appreciated guitars.Vintage fender guitars,vintage Gibson guitars,Vintage Ibanez guitars,Guild guitars,Valley arts guitars,Gretsch guitars,Taylor guitars,Martin guitars,Takamine guitars,Stratocasters ,Telecasters,guitar cases,and guitar parts. Both vintage electric guitars and vintage acoustic guitars for sale . Vintage Grammer guitars, Martin guitars. Also included are Fender amps,Guild amps,Magnatone amps,tweed,blackface,silverface amps,amp parts and repair..Electric guitars sales,acoustic guitars for sale ,vintage electric guitars ,vintage acoustic guitars,vintage bass guitars ,vintage fender guitars,vintage Gibson guitars,vintage Ibanez guitars,vintage guild guitars,vintage fender amps.vintage amps,fender,fender telecasters,Gibson Les Paul,,vintage guitars for sale ,guitars for trade ,buying guitars, sell guitars, vintage fender stratocaster,fender esquire,fender P- bass, fender jazz bass,  amps,the vintage guitar news and views, vintage guitar trader,vintage guitar parts ,vintage guitar tuning keys,So whether you are in the market to purchase a vintage or collectible guitar,consign a vintage guitar or place a collectible or vintage guitar on layaway contact Greg's Vintage Guitars Atlanta. vintage guitar pickups, vintage and collectible  guitar sales.

• Vibrato: There are several types of vibrato — a/k/a tremolo or whammy bar — tailpieces. They debuted in the 1930s via inventor Doc Kaufman, who developed a vibrato unit that was mounted on a guitar’s body and had an arm that moved side to side. Today’s vibrato arms move up and down and are dominated by the top-mounted Bigsby style vibrato and various types of through-body vibrato tailpieces, ranging from the spring-tensioned arms found on many classic thin solid bodied guitar models to the dive-bombing units like the Kahler and Floyd Rose types favored by metal shredders. These also have fine-tuners for each string, to compensate for any detuning the use of the vibrato arm might produce. Gibson also offers a top-mounted Vibrola unit of its own design.

It’s now time for the most challenging step: fitting everything back into the guitar. Don’t worry: if you did everything correctly up to this point, you shouldn’t have any problems getting it back together. You’ll be using extra wire to pull the electronic parts through the F hole and into their mounting holes on the body. It’s best to start with the component that’s furthest from the F hole, which is usually the jack.
{ "thumbImageID": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "defaultDisplayName": "Epiphone Limited Edition SG Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51500000013041", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry-1500000013041.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51500000013040", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue-1500000013040.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000-00-60x60.jpg", "imgAlt": "" } ] }

Perry has also endorsed an affordable replica version of the Boneyard guitar made by Epiphone that carries the same USA made Burstbucker pickups as the Gibson model. It is a customized Gibson B.B. King “Lucille” guitar; however, instead of the black finish and “Lucille” signature on the headstock, Perry’s guitar features a white finish, a “Billie Perry” signature on headstock and an image of Billie Perry on the front of the guitar.


Sometimes people forget that the greatest musician is not the one who can plays faster. I play guitar and I admire who plays fast, but i admire more the ones who can make beatiful music, even if it's simple. Frusciante is one of the few guys who can do so (beside Hendrix). And Frusciante could play all of Jimi's songs when he was 12 years old, and I guess he still can. So for those who compare them to Steve Vai, you should listen to music and not watch to the speed of their fingers.
One app I can recommend for playing these SoundFonts on smartphones or tablets is bs-16i from bismark.  Large SoundFount files like Nice-Keys-* listed at the top of this page have been tested and run perfectly on newer iPads with 3gb of Ram or more. For iPads with 2gb (Air2) it is best to limit the SoundFont size to around 600mb. For older devices try SoundFonts around 300mb.
Another thing to keep in mind is the purpose of the amplifier. And I don’t mean the actual purpose. We all know that I’m pretty sure. What I mean is what you will be using it for? Are you a beginner who wants to practice a lot in their basement before they ever take their guitar and amp into the daylight or maybe you have been playing for quite some time and want to record your music. MAYBE you have gathered all your strength and confidence (and your band) and decided to gig. All of these situations are somewhat different and various amps work for different purposes. While there are a lot of amps that do all of them together, sometimes getting an amp just for practice might be more efficient and, of course, affordable.
I don't think its objective that sweep picking is better than tapping. I mean all of these techniques are great. One could say that vibrato is the best technique. But for me both tapping and sweep picking are great. Tapping kinda sounds like emotional/crying to me. While sweep picking kinda sounds like some fighting/running, I mean fast paced. - zxm
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.

Description: Body: Laminated Maple - Flamed - Top Wood: Laminated Maple - Flamed - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 43mm - Fingerboard: Ebony - Binding: White - Frets: 22, Jumbo, Medium - Inlay: Pearloid Thumbnail - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 3+3 - Bridge: Rocking Bar - Cutaway: Double - Hardware: 2x Volume Control, 1x Tone Control, 3-Way Switch, Schaller Tuners - Pickups: FilterTron - Pickup Configuration: Dual - String Instrument Finish: Orange Stain
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.[14] Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.
While there is absolutely no reason to go with "standard" if that's not what you prefer for a given instrument, I think it's safe to say that 10s (usually 10-46) are standard, since nearly every string manufacturer that uses such descriptors for their electric sets refers to their 10s as "regular." Ernie Ball Regular SLinky? 10-46. Fender Regular Whatevers? 10-46. D'addario Regular Light (note that there is no other, more REGULAR sounding name)? 10-46. Dean Markley Regular Blue Steels? 10-46...
Different people have different opinions on what makes a vintage guitar. For the purposes of this site, a vintage electric guitar or vintage bass is one that was produced in the golden age of rock and roll. From the very early 1950s when Fender first produced the Esquire and Broadcaster, and Gibson the Les Paul; to the early 1980s, when both of these companies sold to their current owners.
A tung oil-finished rock maple neck, and a slightly more curved fretboard radius of 13.75 inches are the other small modifications to the ‘speed’ features on the MD200. However, it has a thinner bolt-on neck as compared to the MD400’s wider mahogany set neck. That said, both neck profiles remain a shallow “C” shape, and the guitars’ dramatically beveled cutaways give you ample room to reach the high notes.
Although most of this article deals with miking regular guitar amps or using various DI options, there are also some great sounds to be had using very low-power guitar amps — even battery-powered ones. You can see these in music shops, often designed to look like miniature versions of Marshall, Fender or other top-name amplifiers. While some sound pretty grim, others sound surprisingly musical and raunchy. Obviously they don't have a lot of low end, but if you mic them closely to exploit whatever proximity effect your cardioid mic has to offer, and use EQ cut to tame the inevitable mid-range resonance, you can get some really great sounds. Best of all is that these things are cheap, so you can afford to experiment, and they also come in useful for their intended purpose, which is practising, something we all tend to do too little of when we get caught up in recording technology.
Last Update Sept 22nd, 2018 Electric guitars are those that have an amplification feature. You can connect your guitar to a power source and amplify the sound produced onto a loud speaker. They are normally a perfect choice for stage performances and bands. Below are brief reviews of 10 best electric guitars in India, which are among the best in Indian market. These best electric guitars were curated by our experts according to their popularity, reviews and ratings by people across India.
The Ibanez TSA15H gets most of its high ratings from users who love the sound of a cranked tube amp, because this is where it excels. This is especially true of guitarists who use single coil guitars, but there are some humbucker users who are just as impressed. Even experts commend the amp's dynamic response, Premiere Guitar's Kenny Rardin comments: "It feels and responds like a good tube amp, and varying the controls dials in the response even further". Value for money and reliability are also commended, as expected from Ibanez.
Our first recommendation in this list is the epic Les Paul model by Epiphone. The Special II model of Epiphone is specially made for beginners. If you are just starting to play the guitar and looking for a good quality one from the trusted band, you can buy this one. This one is very low cost and offers a lot more features than other Gibson guitars.
My interests are in the Kents with the script logo on the headstock, body, and pickups. The headstock is Gibson-ish with tuners on both sides. The pickup nearest the neck is tilted, regardless of how many pickups are on the guitar. One model, the 742 has four pickups with switches, volume and tone knobs for each. Overkill, to say the least, and I have read somewhere that they don’t sound very good. However, I have seen some youtube video where a 742 sounds pretty good in live performance. A lot of the sound comes from a proper setup and the hands of a skilled player. Hopefully I’ll be able to find out for myself someday. Regardless, the 742 is one funky-looking guitar.
The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.
I purchased my Dove in 1989 in a mom and pop kind of music store in North GA , actually Cumming GA. I have played it ever since and I have owned many other guitars in my 52 Years in the music business but it has always been my come back acoustic for the sound and playability of the neck slim D stile ,but the sound quality is very much as good as any lots more expensive guitars,the way it holds the overtone of the note long after you play the note in the body is just unbelievable ,my hat's off to which either company wants to claim they built it I am just glad they did!! Damn fine Guitar.Thanks,Victor
2) The neck edges at the fret board are not rounded and tend to be rather sharp which can really start to hurt your hands if you play for awhile . Typically this is where guitar companies skimp on their budget models and Yamaha didn't disappoint. But it's an easy fix for a Luthier who will just take some sand paper and sand down the sharp edges and dress the end of the frets if needed. Also, its an easy fix for someone with a steady hand, good eye, and a women's fingernail file. It took me about 10 minutes to round the neck edges with a fingernail file and it didn't even require touch up paint thereafter as the fret board is solid wood and the same color all the way through. She feels like a dream now and I can play all day long without the sharp neck edge digging into my hand, and my hand just glides ever so smoothly up and down the neck as it should.
Controls available are extensive, but pretty straight forward and the quality of the entire package defies logic when you consider the price. In terms of budget reverbs, this one is among the best you can find at the moment. Behringer keeps pushing the line further and further by delivering quality and versatility to those who are limited financially.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black
If you want to measure the fret size on existing instruments, a good way to do it is to get an inexpensive dial caliper (think Harbor Freight etc).  You can measure the width with the outer jaws (make sure to zero out the calipers for accurate measurements), but for the height (unless you are going to notch the depth rod and subtract the difference), use a piece of something of a uniform thickness and drill a hole in it to accomodate the depth rod, place it across two frets and measure thru the hole (usually near the crown) to the fingerboard and subtract your piece's thickness.  When measuring fret height, it is always good to measure a few different places on the neck as the height may vary according to leveling and wear. On many guitars (but not all) the upper frets (if there is not a neck joint area hump that was accounting for during leveling) will be a good indicator of fret height.
The ultimate in superb workmanship, total versatility. This deluxe 4 pickup electric will be played with pride by the most experienced performer.  Four simulated split pickups make possible virtually unlimited sound combinations. Powerful magnetic pickups are height adjustable. Ultra fast steel reinforced neck. Head and Rosewood fingerboard bound in White. .22 Nickel Silver frets (plus zero fret), 8 “N” shaped pearl position markers, 4 volume controls, 3 position rotary tone control (high-medium-low), Rhythm-Solo-Switch, 4 slide pickup switches.  Advanced type tremolo arm.  Chrome adjustable roller-type bridge.  Highly polished yellow-to-red-to-black sunburst finish.  Size 41″x14″.
There is no right or wrong answer when choosing a guitar. Choose whichever guitar suits your style. If you are inspired by electric guitar players, you may want to follow suit. If unplugged acoustic sounds tend to be what you enjoy most, then the acoustic guitar is the right choice for you. If you’re still not sure, make a list of ten bands or artists whose styles you’d like to emulate. If the list is predominantly electric, go electric. If it’s acoustic, then go acoustic.
If you had to write a soundtrack for the 20th century, electric guitars would almost certainly be playing the tune. No other instrument defines the angry rebelliousness of the modern age quite like it. Who could forget Chuck Berry, Jimi Hendrix, the Rolling Stones, or Nirvana—some of the greatest exponents of guitar-driven rock? But if you think playing an electric guitar is all about attitude and dexterity, think again: it's actually about the science of electromagnetism. Let's take a closer look a how these amazing instruments turn electricity into sound.
In January 2017, Vox introduced the MV50 amp head and amp sets. Described by Vox as a hybrid amp, the amp heads are called the MV50 AC, the MV50 Clean, and the MV50 Rock. When paired with the BC108 cabinet, each is then described as the MV50 AC set, the MV50 Clean set, and the MV50 Rock set respectively. Vox states the MV50 AC is designed to provide the sound of a VOX AC30, and that the MV50 Clean is designed to provide clean tones with a lot of headroom as inspired by the sound of American amplifiers. Vox states the MV50 Rock is designed to provide the more aggressive high gain sound of vintage British amps. In January 2018, Vox announced two new MV50 amp heads: the MV50 Boutique and the MV50 High Gain.
View a complete range of budget friendly electric guitars over at PMT Online today or call in to your local PMT store to see a full range. We have many electric guitars spanning all budgets, styles and genres including a complete range of guitar starter packs. Alternatively, call 0151 448 2089 to speak to one of our guitar experts to discuss your needs.
There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.
In 1935, the Dobro Corporation and National Stringed Instrument merged to become the National Dobro Corporation. The Dobro operation moved into the larger facilities of National, however, the two organizations never really reintegrated. Both National and Dobro maintained separate production lines, sales organizations and distributors throughout the rest of their L.A. tenure. Before long, as we shall see, National Dobro would relocate to Chicago while keeping its facilities in L.A. for a few more years. Dobro production would continue in L.A. through ’37 or so, with some leftover parts being assembled perhaps as late as ’39, after which the Dobro name went into hiatus until revived by the Dopyeras in ’59, but that, too, is another story in the Big Guitar City!

There are many varieties of speaker combinations used in guitar speaker cabinets, including one 12" speaker, one 15" speaker (this is more common for bass amplifiers than for electric guitar cabinets), two 10" speakers, four 10" speakers, four 12" speakers, or eight 10" speakers. Less commonly, guitar cabinets may contain different sizes of speaker in the same cabinet. Cabinets with eight 10" speakers are large and heavy, and they are often equipped with wheels and a "towel bar"-style handle for transport. Some cabinets use mixed speaker types, such as one 15" speaker and two 10" speakers.
FuzzPlus2 is an update of our popular free download Fuzz+. The basis of the plug-in is a transform model of a famous vintage fuzz pedal. There are four controls: Fuzz knob: This controls, as you might imagine, exactly how much fuzz is applied to the signal. Tone knob: This controls the brightness of the distorted signal. Output knob: This is the output volume of the device, when it is active. Bypass button: This works just like the switch on a stomp box. When the blue light is lit, you're money. When it's not, the input is passed directly to the output. This can be automated for a slightly different vibe than automating the effect bypass of your host. free vst plugin.
Primarily, reverb pedals tend to give you a lot more variety and control over the effect than you'll have with an amplifier. In fact, most amps that have reverb will have a single reverb knob that you turn up for more of the effect, or down for less. This can work if you use reverb sparingly, but if you're into the effect and like to use it a lot, that's not enough control to really get the most out of your reverberated tone.
PICK GUARD - KRAMER 450 - LO GIBSON - GOLDTOP - GIBSON SG CUSTOM SHOP - THUNDER JET - TAKAMINE - GIBSON 1959 - 450 12 - 66 ES-330 - 1972 - HAGSTROM F-300 RED LEFTHANDED - GIANNINI - BALLADEER - WHITE LES PAUL - HAGSTROM BRIDGE - CONRAD - LES PAUL 1953 - PROJECT - WASHBURN EA27 - KALAMAZOO KG - FRAMUS BASS - BASS VI - 1967 - ES-330 - HOLLOW - 1981 LES - BALDWIN BABY BISON - STELLA ACUOSTIC - MARTIN N-20 - VAN EPS - LES PAUL RECORDING - PIG - MARLBORO - HAGSTROM F12-S - FENDER STRATOCASTER 63 - LS 6 - HARMONY - J-45 - UNIVOX BASS
Firstly, they are cheaper than their tube counterparts, which is why most beginners will end up starting on a solid-state amp. They are also much more efficient, easier to maintain (no need to change tubes), lighter to carry, and less fragile. While the tone of modern-day solid-state amps can be incredible, they don’t tend to be as fluid or responsive as tube amps. For more on solid-state amps, check out our dedicated solid-state amp page.
Effects such as chorus, phasing, flanging and pitch vibrato are created using pitch modulation and, except in the case of vibrato, the modulated sound is added back to the original to create the effect. The pitch modulation is generated by delaying the signal by just a few milliseconds, and then modulating the delay time, using a low frequency oscillator (or LFO). For vibrato, this is all that needs to be done and, because the delay time is actually very short, the effect is perceived as happening in real time. The other effects, however, generally rely on an equal balance of the dry and modulated signals to achieve the strongest effect, so it is easier when working with plug-ins to adjust the wet/dry balance using the plug-in controls, rather than adding the wet only signal via a send/return loop. As a rule, these effects aren't very processor-intensive so, if you're working with plug-ins, you can probably afford to insert as many as you need into track or bus insert points as required. Stereo versions of these plug-ins may generate different modulated delays for the left and right channels to create a more dramatic spatial effect.
The two new Fender-style solidbody basses were the Precisely and Naked. The double-cutaway Precisely U1971 had a single pickup under a chrome cover, covered bridge/tailpiece assembly, Fender-style four-in-line head, dot-inlaid rosewood fingerboard, black-white-black pickguard with fingerrest, volume and tone. The Precisely had an outlined logo decal and a sunburst finish. The Naked U1971N was the same thing, natural-finished. Both cost $250.
The Ovation Guitar Company, a holding ofKaman Music Corporation, which itself is owned byFender Musical Instruments Corporation, is a guitarmanufacturing company based in New Hartford, Connecticut. Ovation primarily manufactures steel-string acoustic guitars. They have been credited with “by far the most significant developments in the design and construction of acoustic guitars” from the 1960s through the 1980s.[
ESP started life in Japan in 1975 as Electric Sound Products – a single store that provided replacements parts for guitars. These days they are a huge guitar manufacturer and a big name in heavy metal, having supplied guitars for Metallica, Megadeth, and Slayer, among others. ESP also own the subsidiary LTD, who produce low priced, entry-level versions of their guitars.
Many pedal builders will order their resistors, capacitors, IC, and other components in bulk online. Most of the time, this is a much cheaper method than buying single components – plus it gives you an enormous variety of components to use. It may also be wise to check out the circuit boards inside of any old electronics, or broken guitar pedals you no longer use. You’d be surprised what you may find.
By ’71, the Univox had expanded considerably with new copy guitars. Still around from earlier were the Hi Flyer Mosrite copy, the ‘Lectra violin bass, and the Mother or Rhythm and Blues Les Paul copy. Joining them were the Badazz guitar and bass, the Effie thinline, another Coily thinline guitar and bass, and the Naked and Precisely basses. Univox acoustics are also first sighted (as far as we know) in ’71.

Wah – This type of pedal was a Jimi Hendrix favorite, and you’ve probably heard the original “Cry Baby” in a lot of music. It was the first wah pedal to find success, and paved the way for others to follow. The Cry Baby is an example of manual wah, controlled by a rocker pedal that adjusts the level of treble response dynamically as you move it. Some modern wah pedals, by contrast, are “auto-wah effects,” which do the same thing but use presets for control instead of live input from your foot.
The key elements of mic positioning are distance from the source and orientation to it. Moving the mic closer to the amp provides more definition, increased highs and lows, and less room sound. As you pull the mic back, the sound becomes less detailed, more "midrangey," and more blended with the ambience. Depending on the room you're in, a distant-miked amp may gain a natural presence and unique character in the mix, despite an apparent decrease in definition. On the other hand, placing the mic too far back will result in a washed-out, murky, or hard-to-control tone.
The stars of the show are inarguably the pickups: the EMG Retro Active Hot 70 set, which goes for $200 alone. This combines a ceramic humbucker at the bridge and Alnico V humbucker at the neck—both open-coil—to produce the hot tones of Van Halen and other ’70s hard rock acts. They’re active pickups, too, wired to a FET preamp that minimizes noise and levels outputs.
Being in the entry level section of the market, the Blackstar ID:Core Stereo 20 V2 is meant to be an all-in-one practice rig complete with amp modeling and effects. But what makes it stand out is the use of two 5" speakers for a fuller stereo sound, which complements the amp's versatile voicing features. Speaking of voicing, this amp is loaded with 6 essential tones to play with, two variations of clean (warm and bright), crunch (normal and super) and overdrive (OD1 and OD2), which by themselves are enough to play most musical styles. But being from Blackstar, this amp is equipped with their ISF (Infinite Shape Feature) knob that lets you fine tune the voicing of the amp to your preference. In addition, the ID:Core Stereo 20 V2 comes with 12 built-in effects, covering essential modulation types, delays and reverbs, all of which add up to a portable amp that gives you a lot of tone options.

7 String 8 String Accessories Acoustic / Electric Guitar Acoustic Guitar Alvarez Amplifier Bass Guitar Blackjack Celebrity Classical Guitar Combo Amp D'Addario DN-2411 Dreadnought ebony Effects Electric Guitar Epiphone Fender Floyd Rose Gigbag Guitar Strap Hard Shell Case Hellraiser Ibanez Jackson Larrivee Les Paul Levy's Leathers Maple Lake New Ovation Refurbished Schecter Schecter Guitar Research Signature Solid Body Solid Top Strings Tacoma Takamine USA Used Wechter
Nearly all Martin instruments come in different styles. The higher the style number, the more fancy (and collectible) the instrument. Again starting in October 1930, Martin stamped all flat top guitars with the style number, directly after the body size (and above the serial number). Style numbers can range from 15 to 45. A letter can follow the style number too, giving some additional info about the instrument. For example, a "T" after the style number indicates a Tenor guitar. See the general specs section for a full list of these suffixes.

Yamaha is known for focusing, in modern years, on band instruments. But at one point in their tenure in the early 90s, they owned a good share of the student model market with their beautiful Pacifica line. Thankfully, in the past few years, they’ve reintroduced mass runs of this guitar, and it is a great option for a first-time guitar player. Why? Well if you ask any older player who once started on a Pacifica, most of them will tell you that they still have it in their collection somewhere, both for sentimental value, and because it’s built like a tank and plays well.
This guitar is the J Mascis signature, specifically spec’d out by the man at an affordable pricepoint. Jazzmasters will never not be cool, in part because their versatility tends to exceed expectations. Like the Modern Player Tele above, Fender leveraged much-improved Chinese production to bring this in under $500. They also opted for lesser P90 pickups compared to the expected (and usually truly excellent) proper Jazzmasters, but many players won’t notice this.
While the other digital amplifiers we tried (the Blackstone ID:Core Stereo 10 V2 and the Line 6 Spider Classic 15) offered a similarly wide range of good sounds, most of our panelists preferred the Champion 20 simply because it was easier to use. Lynn Shipley Sokolow preferred the simplicity of non-digital amps such as the Vox Pathfinder 10, but she said, “The Fender is the best of the digitals because it’s easy to understand the controls.”
Hello. If any of you who have a dorado guitar would like to sell it, please email me (swiver84@hotmail.com). I am always looking for cool vintage guitars. I am a big fan of the Gretsch name and have found the Dorados to be very nice guitars. I don't check follow ups much, so you'll have to email to get in touch with me. Put "Dorado" in the subject because I get a lot of spam and tend to get crazy with the delete button. Thanks :)

The Gibson L5, an acoustic archtop guitar which was first produced in 1923, was an early “jazz”-style guitar which was used by early jazz guitarists such as Eddie Lang. By the 1930s, the guitar began to displace the banjo as the primary chordal rhythm instrument in jazz music, because the guitar could be used to voice chords of greater harmonic complexity, and it had a somewhat more muted tone that blended well with the upright bass, which, by this time, had almost completely replaced the tuba as the dominant bass instrument in jazz music.
In 1970, B.B. crossed over to the white rock audience with “The Thrill Is Gone.” In 1988, he virtually repeated the trick when he recorded “When Love Comes to Town” with U2. Always the humble student of the instrument, B.B. King became jazzier and better than ever as his life and career continued well into the new century. His loss earlier this year was deeply felt by the music community and, particularly, by the guitarist he influenced.
Though these pickups can be modded to fit in other guitars, the Antiquity Jazzmaster flat coil design is intended to serve as an upgrade to the Fender or Squier Jazzmaster series. Popularized in the late ’50s and ’60s, the classic Jazzmaster tone is rich and crisp but, without harshness on the higher register. This pickup comes in both a neck and bridge version that work together to cancel noise and produce that same rich tone with some extra snap and good string response coming out of two Alnico magnets.
This website is not affiliated with the Samick Musical Instrument Mfg. Company in any way. We do not deal in the buying or selling of instruments of any kind, nor do we offer evaluation services for your instruments. Most prices listed are MSRP, taken from catalogs and price lists, and have not been adjusted for inflation (unless specified) and do not reflect the actual street value a model may have sold at. More on prices here: MSRP.

The sets, as mentioned above, are paired with Vox's BC108, which is a compact, portable, semi open-back cabinet that is front loaded with a single "8” VOX Original 8 Ohm Speaker" rated at 25W input (Dimensions W x D x H: 260 x 200 x 285 mm/10.24" x 7.87" x 11.2"). The BC108 also comes with two 1/4" jacks, wired in parallel, for adding another cabinet. Vox has also suggested the compact BC112, a semi-open back, oval port cabinet containing a single 70W, 12" Celestion G12 V-type speaker, to pair with the MV50.

With a body shape that looks like it could have been cut out by hand using a saw in your garden shed, this Kay Old Kraftsman Sizzler guitar manages to be crude and quite fantastic at the same time. "Old Kraftsman" was actually a brandname used on Kay guitars sold by Spiegel stores. The maple neck gives it a rather Fender-like appearance, but this is in fact a set neck and not a bolt-on.
By 1954 the Teisco line had begun to grow. Some valuable reference is available in a Japanese history of Teisco guitars, which is written completely in Japanese (which I unfortunately can’t read). This has an early photo of the company’s founders and presumably engineers and designers, mugging around a car parked in front of the Teisco factory. The photo is from the ’50s (1954 or later), and the instruments in their hands and surrounding them are at the core of the ’50s line. Shown were two small Les Pauls, two single-cutaway archtop electrics, at least three Hawaiian lap steels, and at least four amplifiers.
There is enough acoustic guitars in the world to rock it to sleep, with a peaceful feeling of spanish legends to it. On the other hand there are enough electric guitars in the world to guarantee that it will never go to sleep, because there is always an electric guitar playing somewhere in the world. Which is exciting and which also causes the prices for electric guitar amps to be lower than for the amps of acoustic guitars, while retaining the same level of quality. The Roland Micro Cube Guitar Amplifier is a tiny little angel in the form of metal and plastic combined. It is small enough to be easy to carry around and store wherever, but it is also powerful enough to attract the attention of anyone passing you in the street, sitting in the bar, or otherwise hanging out in your vicinity. With a punkish style and a punk attitude, it is the perfect little helper for any musician, beginner or otherwise.
Take a guitar playing friend with you, decide on a price range and try out all the guitars you can afford. Then go to another shop and do the same. Include used instruments too, and don't worry too much about the appearance. The important thing is how it sounds and how well it plays. A guitar with a nice low action which sounds reasonably good will help a great deal toward helping you stick with it. A guitar with a high action that sounds horrible will make you give up before your fingertips have time to harden!
This is sort of a corollary to the DI+Amp suggestion. While effects on bass aren’t as common as with guitar parts, some bassists will come in with these big rigs of effect boxes, and want to record “their sound”, which often is clearly overprocessed for the song. Rather than argue the point, let the player hear the sound he’s used to during tracking, but be sure to also grab a nice clean signal, prior to all the effects, usually straight off the bass via a DI. That way, if your concerns prove all too true come mixdown, you can turn to the dry track, and recreate those favored effects to a more appropriate degree, with studio tools. Even if the effected bass sounds good to you, many pedals and MI effect boxes are noisy, and you might have to recreate the sound anyway, to avoid problematic buzz or hiss from the player’s cool-but-dirty toys.
I received a Dorado 12 string as a birthday present in the late 1990s, installed a passive pickup, and played it around the house and at small venues for fifteen years or more. For an all-laminate, smaller body 12 string with a trapeze bridge, it sounded great. The neck was comfortable, too. I had a 1965 Gibson B-25 12 for a few of those years, but the neck was way fatter than the Dorado, which I passed along to a friend in need. I can't say the Dorado sounded better than the Gibson, but it sure out-jangled it. Wish I still had it!
In terms of tone, a smaller dreadnought body will be slightly lacking in projecting the low-end frequencies. That doesn't matter here thanks to being an acoustic electric. With that said, the trebles and mids give away its origin, tone-wise. Play a few chords and you'll immediately hear that classic 'Taylor sound' even from a lower mid-range guitar like this one.
Or course, you have a repulsive snobs on here that can't acknowledge the truth that the list above correctly consists of quality, popular choices. I'd never play a Dean, a Parker, or a Godin. I'm so glad you love them, but you're a minority. The Gibsons and Fenders are tried and true designs. That's why the majority play them. They're actually good guitars, at least the equal of the snobs-are-us suggestions above. Having limited funds to spend, and wanting to ensure that a quality guitar with quality tone is aquired, I would go with a Fender or a Gibson without hesitation. I'm not a snotty nosed rich brat like most of the above put-downs and belly achers; I'm a 50+ mature adult who knows how to play and I play good, thank you. Not because I say, but because that's what others say. Fender and Gibson are overall the best guitars on the market for the average person of means and talent, unless you're rich and can afford something above $5000.00. Otherwise, calm down, remove the pentangle from your rectum, and relax. Is it really that important to you? THEN OPEN YOUR OWN WEBSITE AND PREACH ABOUT IT. This has been a public service message...Billy
While modified four-stage phasers like the Uni-Vibe and other effects before it had sought to evoke a choral-like sound, the chorus pedal as we know it didn’t arrive until affordable short-delay chips became widely available in the late 1970s. This in itself implies that chorus is a type of delay, and indeed it is, but the sonic results of the ways in which these short delays are transformed lands the effect firmly in the modulation camp, so it’s easiest to consider it as such (the function of these delay chips will be explained in more detail in the Echo & Delay section down the road). IC-based chorus effects work in a manner very similar to flangers, detailed above. The main difference, put simply, is that the short delays used to create harmonically spaced notches and peaks in the frequency spectrum are manipulated to modulate more tightly above and below specific frequency ranges, rather than shifted to swoosh broadly up and down the entire spectrum. The result, and intention, is a sound like a group of singers or similar instruments, where some voices/strings inevitably waver slightly from those beside them, producing a quivering clash of harmonics that evokes space and dimension when used subtly. The effect is possibly best heard—as pure effect, at least—in stereo, and the nature of the beast lends itself readily to stereo outputs. The broad soundstage and Doppler-like movement a good stereo chorus can spread out before you between a pair of spaced amps or L-R headphones make it one of the most spacious, three-dimensional effects available, short of long delays or cavernous reverb settings.
Planning for this review started right after the January 2018 National Association of Music Merchants (NAMM) show in Anaheim, California. We didn’t notice any significant introductions in the under-$200 electric guitar category during our time there, but new guitars can appear at any time. We’ll be watching out for them, and we’ll get our hands on them as soon as we can.
The first popular humbucker was introduced by Gibson in 1955, and the world of music was never the same again. In general, the humbucker offers a thick, rich tone, with a medium to high output, which is why they are staple of heavy rock and metal (although equally popular in jazz music). You will find that humbuckers are used by everyone from Eddie van Halen and Dave Mustaine, to Jimmy Page and Dimebag Darrell. Humbuckers feature two coils wired out of phase with each other, and – as the name suggests – are used to eliminate the unpleasant 60-cycle hum that plagues many single-coil pickups. Gibson’s ’57 Classic Plus is a legend in the world of humbuckers, although be sure to check out our humbucker page for more excellent models.
The goal is to find the body shape and configuration that appeals the most to your eyes and ears. The most straightforward choice for beginners will be the solidbody for its durability. Players who are looking to expand their sonic palette are usually the ones who will take interest in semi-hollow and hollow body guitars. For more information on this topic read The Different Types of Electric Guitars Explained. 

When it comes to acoustics, you can’t beat Taylor’s eco-sourced Tone Woods. The 114e features a solid Sitka Spruce top and layered Sapele back and sides, giving the Taylor a rich and full-bodied sound that is hard to tell apart from solid wood bodies more than twice the price. The electrics and built-in preamp are top notch and you can’t beat that Taylor neck for finger-friendliness if you’re just starting out with chords.​

Iidi began manufacturing guitars in 1958 in Nagoya, Japan. Iida is still producing guitars, but mostly in their factory located in Korea. They were mainly responsible for producing acoustic and semi-acoustic rather than electric guitars for major manufacturers Ibanez and Yamaha. There is speculation that Iida may have assisted Moridara for a short period in making Morris badged guitars, but that is not verified.
Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
The Effect: Bass guitars are the core of every band. Along with drums, they make the rhythm section. Because of this, bass players are seen as ‘background members’ in a band. With that said, bass guitar offers much more range than that. Following the footsteps of legends such as Lemmy Kilmister and others, we can see that bass guitar can be the star of the show. All you really need is a good distortion pedal. Finding one may prove to be trickier than it seems. Your average guitar dist pedal may work, but chances are you will get better results with something like Tech 21 RIP Red Ripper. This is adedicated dist box for bass guitar, which covers the low end segment of bass tone and gives you some advanced tone shaping options. A proper bass dist box can really make all the difference if you are looking for proper sound.
This fully analog simple plug and play guitar amplifier is enjoyable to play with. It has a switchable clean and dirty channel with separate volume knobs that shares a 3-band EQ treble-mid-bass and gain control to add more grit so players can arrive on a crunch and lead sounds. Other useful attributes on the amp are set of input jacks for a headphone and audio source to play along with a backing track.
Anything for which they are wired and/or programmed.  One great example is my first real guitar, a Carvin V220.  It had two humbuckers in a sorta heavy angular gibson explorer body.  Each pickup had volume and tone with a 3 way selector for either or both pickups to be on.  In addition, you could toggle switches to split coils on the humbucker to do a good approximation of a single coil pickup.  Further, you could toggle in/out of phase to get a Peter Green tone or other effects.   Tom anderson guitars have great configurations.  I have gone to lighter strats in recent years and usually replace the pickups with handwounds and customize my 5way switch depending on the guitar.   I love true single coils except that I prefer a humbucker in the bridge. 
{"id": "L20582", "categoryId":"site5AAG", "name":"Slash Firebird Limited-Edition Electric Guitar", "pageUrl":"/Epiphone/Slash-Firebird-Limited-Edition-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Slash-Firebird-Limited-Edition-Electric-Guitar-Trans-Black/L20582000001000-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"899.00", "priceMin":"899.00", "priceMax":"899.00", "msrp":"1,499.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"565047124900", "priceVisibility": "1", "itemType": "New"}

Gretsch is one of the oldest manufacturers on this list. It was founded in 1883 in New York City by Friedrich Gretsch. He was an immigrant from Germany and was only 27 at the time he founded the company. Gretsch has a wide selection of both acoustic style and electric style guitars. They have models in just about everyone’s price range. You can buy a Gretsch for under $500 or over $2000. Their style is fairly unique. They have an almost “classical” look to them. Keep in mind that the older Gretsch guitars were not as consistent in quality as they are today. So if you’re looking to buy used, try to keep it so you’re buying guitars that are made semi-recently. On the other hand, you might get lucky and snag a great deal. As expected, their sound is excellent.
For example, in the guitar (like other stringed instruments but unlike the piano), open-string notes are not fretted and so require less hand-motion. Thus chords that contain open notes are more easily played and hence more frequently played in popular music, such as folk music. Many of the most popular tunings—standard tuning, open tunings, and new standard tuning—are rich in the open notes used by popular chords. Open tunings allow major triads to be played by barring one fret with only one finger, using the finger like a capo. On guitars without a zeroth fret (after the nut), the intonation of an open note may differ from then note when fretted on other strings; consequently, on some guitars, the sound of an open note may be inferior to that of a fretted note.[37]
Let's face it: Big, high-powered guitar amplifiers full of sizzling tubes capable of frying an omelet are fun, and the sound of an electric guitar playing through one has been pervasive in popular music since the 1960's. They're sometimes very loud as well, and sustaining the volume levels required whilst attaining those majestic, exotic or extreme guitar tones for any appreciable length of playing time in one's house or apartment without interruption from family, neighbors or the police is generally impossible. Don't fret over it. We'll discuss a variety of solutions for the volume problem later on.
{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000-00-60x60.jpg", "imgAlt": "" } ] }
Some effects produced dramatically weird sounds that were largely impossible to pull off. The peculiar 1948 DeArmond Trem-Trol (used extensively by rock-and-roll pioneer Bo Diddley) altered the volume of the guitar signal by exposing the connecting pin to a brass-and-glass canister half-filled with shaking, water-based electrolytic “Hydro-fluid.” The shaking—and often leaky—fluid washed over the pin and would bend the signal’s volume, causing an oscillating, watery tone. In the words of Chris Gray, one of its few remaining owners, “This is not a subtle effect—it adds all its personality to your sound whether you’re ready for it or not.”
The desire for innovative sounds has intrigued musicians in every culture since the dawn of time. Oscillating the volume of a note is an ancient technique — we’ve been able to do it with our voices as long as we’ve been capable of singing. Any musician playing a stringed instrument can create tremolo effect — they simply move the bow or finger back and forth while sustaining a note, as violinists and cellists do. But what about other sounds? How has the addition of mechanical and digital devices changed our music?
In his informative, yet relaxed style, Sean takes us on a complete guitar recording journey starting at the vibrating strings and ending at the DAW. You'll first learn how to tune and prepare a guitar for recording. Next you're off to investigate the world of the electric guitar. You'll see microphones and mic placement techniques followed by a deep look at amplifiers and what to do when you're working with combos and stacks.
Petros Guitars are an elite customized acoustic guitar luthier, formed by the Petros brothers, Bruce and Matt Petros, based in Kaukauna, Wisconsin. They are noted for their exceptionally high quality craftsmanship and often make guitars similar in appearance to Spanish Baroque guitars with the design, making both steel and nylon string hand-made guitars. Bruce began making guitars in 1972, and in 2000 he was joined by his brother to form the Petros company.[
pay is about HALF of what it should be for this expensive of a product, when a factory is turning out nearly $1 million a week in profits from one factory with less than 50 employees, they should make more than the salary cap of $12-$15 per hr, the only reason you make a decent living wage is because you work so much you don't have any time to live. You may have time to go home and sleep (and eat something, if you're VERY lucky, most days i don't even have the energy to wake up and eat once i get home.

SolarWinds Server & Application Monitor allows you to monitor your hybrid IT applications and systems. Monitor Microsoft® Office 365 Exchange side by side on your on-premises Exchange server and other applications. Check, track, and report on O365 user/shared mailbox growth, users over quota, archived mailboxes, inactive mailboxes, mobile device, mailbox groups, and more. You can also monitor Microsoft portal access to help ensure you're meeting your SLAs.


What people may not know is that they have a very affordable line of entry-level guitars.  This line continues the legacy of craftsmanship and prestige that comes with owning a Taylor. Whether you look into their line of Baby Taylors – 3/4 sized guitars that play better than many full-sized budget guitars, or you look into their entry full-sized acoustics, Taylor will not disappoint you.

Pedals of this template offer a sound that’s considered “natural,” “warm” and “tubey” partly by achieving smooth, symmetrical clipping, and partly by reining in harsher high harmonics that can result in sounds that are heard as jagged and spikey in other pedals. The truth is, opamps really don’t clip in the same way that tubes do, but they are manipulated in these designs to simulate a generally “tube-like” sound. Other early overdrive pedals were designed around discrete transistorized clipping and boosting circuits, though many leaned toward distortion units as properly defined, and added more artificiality to the sound—hence the Tube Screamers’ near-instant popularity when it was introduced.
Guitar brands such as Antoria shared some Ibanez guitar designs. The Antoria guitar brand was managed by JT Coppock Leeds Ltd England. CSL was a brand name managed by Charles Summerfield Ltd England. Maurice Summerfield of the Charles Summerfield Ltd company contributed some design ideas to Hoshino Gakki and also imported Ibanez and CSL guitars into the UK with Hoshino Gakki cooperation from 1964-1987.[3] The Maxxas brand name came about because Hoshino Gakki thought that the guitar did not fit in with the Ibanez model range and was therefore named Maxxas by Rich Lasner from Hoshino USA [4].

If you are considering a traveler or mini guitar, be sure to read reviews of people who own models that range between $40 - $500, because you will find various reasons to stay away from some of the cheaper models that are under$150.  Some of these guitars that are made that cheaply are not much better than toys in quality, sound and crafstmanship, and at this model and price range, you will get what you pay for.  By investing an extra $100 - $200, you can find some fine travelers and minis that will more than accomplish the job, and in fact, some professionals choose certain travelers and minis over others for playability, quality, performance and recording reasons.
The Badazz U1820 guitar and U1820B bass were essentially bolt-neck copies of the new Guild S-100 introduced in 1970, the so-called “Guild SG.” This was a solidbody with slightly offset double cutaways. It had a bolt-on neck with a Gibson-style open book head, outlined decal logo, block inlays, bound 22-fret rosewood fingerboard (rounded end), two of the 12-pole humbuckers with the narrow center black insert, finetune bridge, Hagstrom-style vibrato (as found on early Guilds), two volume and two tone controls, plus three-way. The bass was the same without the vibrato and with dots along the upper edge of the fingerboard. These were available in cherry red, orange sunburst or natural (“naked”). List price for the guitars in ’71 was $199.50 with case, while the basses cost $220. These pickups, by the way, while being somewhat microphonic (as with most early Japanese units), scream, if you like a really hot, high-output sound.

{ "name": "Jet Blue Burst", "skuUrl": "/Ibanez/Artstar-AS153-Semi-Hollow-Electric-Guitar-Jet-Blue-Burst-1500000032799.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "12-13-2018", "price": 999.99, "isOnSale": false, "msrp": 1377.76, "salePrice": 999.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $49 back in rewards Valid through,999.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "999", "decimalValue": "99", "listPrice": 999.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 377.77, "discountPercentage": 27, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000032799", "shipToStore": true, "displaySku": "H91419000002000", "displayId": "1500000032799   POS #: 113004634", "serialized": false, "stickerDesc":"Top Rated", "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/H91419000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Artstar-AS153-Semi-Hollow-Electric-Guitar-Jet-Blue-Burst/H91419000002000-00-140x140.jpg", "styleImgAlt": "Artstar AS153 Semi-Hollow Electric Guitar Jet Blue Burst", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"637145126000", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Available Now" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
Even with a H-H configuration, you could utilize coil splitting to achieve single coil-ish sounds. While arguably this does not give a "true" single coil sound, if humbucker sounds are mainly used, this can be enough. My impression is that most people aren't using the middle position that much, I think the way forward is to try different pickup configurations to find out what you need.
PPS: Made from Polyphenlene Sulfide a material commonly used in automobile and computer parts the PPS picks are lightweight but hard enough to ensure picking is strong and precise, so the pick provides accurate attack with a full-bodied tone as it strikes thestring. Silicon rubber based surfacing on each side, makes this pick ideal for fast picking styles. Available in Teardrop and Jazz shapes, and 0.8mm-1.0mm-1.2mm gauges.
"Craftsmanship, materials, and dimensional design are combined to make this one of Alvarez' most outstanding models. It has fine projection, sensitive response, and speedy action. The inlaid Tree of Life design on the rosewood fingerboard adds to its graceful distinction. Sides and back of flame grained rosewood are bound with ivoroid. Machine heads are chrome enclosed for longer life. Tuning is fast and precise. Slender mahogany neck with adjustable steel rod reinforcement. The top is select spruce chosen for its acoustic quality."
The first subject I concentrated on is (you guessed it) recording electric guitars. What became immediately apparent was that there was a huge range of different techniques being used, and also that there were strong differences of opinion between different professionals, which left the question 'who do I believe?' The only way I could answer that question was to put the different techniques into practice in the studio, and then A/B them to sort the sheep from the goats.
The Hughes & Kettner Tube Meister 36 is a distinct looking tube amplifier head that's packed with features. For something that's compact, this amp can do quite a lot of what bigger amps can in terms of functionality, including having three channels that let you switch between clean, crunch and lead and a full set of complementary controls to tweak each channel to your liking. Another interesting feature of this amp is its TSC (Tube Safety Control), which automatically keeps the tube in bias and monitors them to extend their use. Finally, this amp head comes with a built-in Red box DI, so you can plug the amp head straight to any PA system or recording console without any problem. The people also installed a power attenuator into the amp, which lets you lower the rating to just 1 Watt for quiet practice. Wrapping up its features is the built-in reverb, which compliments the amp instead of distracting users.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Custom - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Ivory, Sunburst
The one-man band has been elevated to new heights lately, but behind the loopers and pads, there usually lies an unremarkable musician. Australian songwriter Tash Sultana brings a widescreen pizazz to the format. Her sprawling, expertly weighted amalgamations of hip hop beats, soothing synth pads and foil-wrapped shimmering tones, give way to surprising bursts of scuzzy, shred-y solos, creating an exhilarating contrast to her breathy vocals. A talent that doesn’t decay with the delay pedal.
This one SOLD pictured has been SOLD OUT: This is one of my favorite vintage Alvarez guitars and is always truly a very good surprise just how great these sound / impressive and I have collected more than several over the years of this very model vintage era lawsuit guitar in AMAZING Condition. Here we have a wonderful and very clean example of a Vintage Japanese Acoustic its a late 1970's great Alvarez 5056 with the most intricately detailed inlay work everywhere on the body.... the front & back in Abalone & the fingerboard is rich - dark and wavy grained it looks to be Brazilian Jacaranda Rosewood and has the Gorgeous Tree of Life in mother of pearl & abalone inlayed into the rich rosewood fingerboard WoW!,even the bridge has Mother of pearl inlaid, (you should have a real good look to come to your own conclusions if its something you like ) and the frets are in very good original condition... action is very good nice & low adjustable either way with no buzzing anywhere on the fretboard real nice playing example here folks.. The finish has a natural golden patina as seen to it and this guitar is strikingly beautiful. No cracks, no repairs, very good - excellent vintage used condition and is JVG rated at 9/10 WoW!... She's very EZ on the eyes to say the least and a premium performer this vintage piece has had over 33+ years to age and mellow and was a one owner California guitar in above better than average condition... no splits or cracks or separations or repairs ever... I believe this to be the cleanest best playing vintage 5056's we have ever had in JVG or seen for that matter. This one is a real pleasure to play! HERE IS A LINK TO CUT & PASTE TO SEE MANY MORE PICS OF THIS INSTRUMENT: https://picasaweb.google.com/gr8bids/Alvarez5059TreeofLifeVintage?authkey=Gv1sRgCNLn6LnEg8bmCQ#slideshow/5613001158042817730 .
When it comes to the specific tone of a guitar as opposed to a harp or piano common wisdom suggests the transient, say “the pick” to be the discriminator at least for untrained listeners. Then the series of harmonics might be of interest. But this is fixed by the scale and fretting. Only the relative amplitude of harmonics may vary, which by common wisdom does not do to much in reasonable bounds.

There's no wrong answer to which neck will work best for you. When people speak of rounder vs. flatter being better for chording/bending, they are referring to the radius of the fretboard, not necessarily overall neck shape. The fretboard on all guitars has a curvature across is, from the the treble to the bass side. Generally speaking, most people would agree that rounder fretboards facilitate better chording, while flatter ones facilitate better bending, but even that's not hard and fast.
The more difficult nut to crack in emulating the full drive train of a modern guitar is the instrument itself. That breaks down into two categories -- acoustic and amplified. VSTs and the gear that emulate the performance logic and physics of a guitar can get close to an acceptable reproduction of acoustic instruments but that last mile will be a hard gap to close. That's because the resonate bodies of most instruments -- especially stringed instruments -- are shaped differently than speakers. The materials, the inertial matrix, they're just not the same. The resonance of a stringed instrument originates at a single point of impact with the string, much as a speaker's sound originates at a sort-of single magnetic point, but inertia carries the vibration of a bowed or plucked string through a 3D body to produce 3D acoustics that cannot be exactly matched with a forward facing speaker -- or by speakers facing front and back. Close, but no exact match. We might argue that speakers can render sounds closer than a human ear can detect, but nuanced vibrations picked up in the bones and fluids of the human body could arguably betray a difference.

Now check both the open and the 12th fret notes again. You’ll have to tune the open string again because by moving the saddle, the tension of the string will have changed and so will need to be retuned. Once you have correctly moved the saddle so that both the open string and the 12th fret are in tune, you can move on to the A string. Repeat until all of the strings have been done. Note that on this particular guitar, the (thick) E, A and D saddles could not be moved far enough forward to intonate correctly, so I had to swap their orientation to give a bit more distance.
FuzzPlus2 is an update of our popular free download Fuzz+. The basis of the plug-in is a transform model of a famous vintage fuzz pedal. There are four controls: Fuzz knob: This controls, as you might imagine, exactly how much fuzz is applied to the signal. Tone knob: This controls the brightness of the distorted signal. Output knob: This is the output volume of the device, when it is active. Bypass button: This works just like the switch on a stomp box. When the blue light is lit, you're money. When it's not, the input is passed directly to the output. This can be automated for a slightly different vibe than automating the effect bypass of your host. free vst plugin.
Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
A seasoned guitarist, however, makes use of restraint at the high end of the spectrum. What to an amateur sounds muffled and buried by the drums is actually the guitar sitting in its proper place in the mix, assuming the role of a rhythm instrument. When it is time for the guitar to jump forward, in a lead part for example, power and contrast can be now gained by unleashing a bit more treble. Here you can use your pickup selector, tone knob, volume knob (which also functions as a mild treble cut as it is rolled back), or a pedal such as an equalizer or overdrive.
The guitar’s ‘shoulders’ – where the body meets the neck joint – will usually be slightly more sloped than you’d see in a classic dreadnought acoustic, while the base of the body will also be narrower than larger sized guitars. All of which makes for a more comfortable and less physically intrusive playing experience. Another obvious benefit of this is the portability of parlour guitars. Their relatively smaller form factor means they lend themselves well to being slung in a case and carted off to gigs with less hassle than, for example, a jumbo-sized acoustic.
Now, since I have started on my wishlist there is another thing that I would like to add. I have seen multi angle videos that include a shot the finger board from the point of view of the player. Looking at this video angle it shows the fingerboard from the same angle as when you are playing it yourself. This is a great view as you do not need to translate what you see mentally. You see it, you play it the same way.

A record store owner named Leo Mintz explained his observation to his friend, DJ Alan Freed.  Freed had a popular show on WJW in Cleveland Ohio and loved finding and playing new music to his large audience. Mintz told him of a new trend he saw in his record store where many teenagers from white families were coming in and buying Rhythm and Blues records.
By and large, time-based effects split the guitar output into two identical signals and momentarily hold one back while allowing the other to play in real time. The two signals are mixed back into one at the output. Usually you can control the length of the delay and the amount of the signal that is affected versus the part that stays "dry" (unaffected). This latter control—found on most effects—is usually called the level control.
Launch price: $779 / £849 | Body: Mahogany with maple top | Neck: Maple | Scale: 25" | Fingerboard: Rosewood | Frets: 24 | Pickups: 2x 85/15 'S' humbuckers | Controls: Volume, tone (with push-pull coil-split), 3-way selector | Hardware: PRS vibrato, PRS SE tuners | Left-handed: Yes | Finish: Fire Red Burst, Tobacco Sunburst, Trampas Green, Whale Blue
{ "thumbImageID": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "defaultDisplayName": "ESP LTD EC-256FM Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "See-Thru Black", "sku": "sku:site51371482100566", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-1371482100566.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Lemon Drop", "sku": "sku:site51335886296183", "price": "429.00", "regularPrice": "429.00", "msrpPrice": "613.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-Lemon-Drop-1335886296183.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-Lemon-Drop/H90046000001000", "brandName": "ESP", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LTD-EC-256FM-Electric-Guitar-Lemon-Drop/H90046000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "See-Thru Black Cherry Sunburst", "sku": "sku:site51371482100552", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst-1371482100552.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst/H90046000002000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst/H90046000002000-00-60x60.jpg", "imgAlt": "" } ] }
×