XM DLX2 is one of two Deluxe models in the highly acclaimed XM series from Washburn. The other one is XM DLX2F. XM DLX2 comes with a solid, double-cut body made of basswood back and maple top. Top is a two-piece and it features the characteristic XM series contour. As all models in this series are, XM DLX2 is made primarily for players of heavy metal and shred styles. Strong pickups, super fast neck and 24-fret fingerboard indicate this. Bridge section features a tune-o-matic bridge with string-through-body construction and black plating. In it`s front, Washburn installs a pair of open-coil humbuckers. Master volume, master tone and a three-way toggle pickup switch comprise the controls unit. 24-fret fingerboard is made of rosewood and it`s installed on top of a set in maple neck.
Everything about the shape and feel of the S6 Original is meant to be as close to familiar acoustic guitars as possible, including its playability, which is brought about by its 25.5" scale length, 1.8" nut width and 16" fingerboard radius. Tone wise, you're getting a crisp yet warm tone thanks to its pressure-tested solid cedar top, which also adds to the overall earthy appeal of the instrument.
Anytime a single coil-sized humbucker is split, a tiny coil is the one seeing the strings, so the volume is going to drop. You can split to the other coil, or set the switch to wire the pickup in parallel, which will keep it hum cancelling. However, splitting to the other coil in a neck position Cool Rails probably won’t be a big difference in sound since the coils are pretty close together and pretty small.

I know of two amp-and-effects modeling apps for the iPhone/iPod Touch/iPad, both of which are great and allow you to get realistic amp tones through your headphones. AmpKit and Amplitube both do a great job of simulating all the standard amp models and pedals, and they aren't very expensive. I use and prefer AmpKit myself, and between the app and the guitar-to-iPhone interface, I spent a total of $50.
By the early ’80s, MTI was importing Westone guitars from Matsumoku, which had made its earlier Univox guitars (and the competitive Westbury guitars offered by Unicord). Wes-tone guitars continued to be distributed by MTI until ’84, when St. Louis Music, now a partner in the Matsumoku operation, took over the brand name and phased out its older Electra brand (also made by Matsumoku) in favor of Electra-Westone and then Westone. But that’s another story…
One of the things that initially surprised me was that coincident dual-mic techniques, where the two mics are placed as close as possible to each other to minimise phase cancellation between them, actually appear to be more commonly used than single-mic techniques. John Leckie explains: "There's an amazing difference in the sound and colouration you get from adjusting the balance of each of the mics, and you can get radically different textures depending on your mix of the two."
Now, as others have mentioned, there is a switch that controls which pickup (or pickups plural) you want to use at any given moment. Seeing as each pickup is placed at a different point under the strings, the vibrations are slightly different. The closer the strings are to the bridge at the bottom, the more 'narrow' and intense the vibrations get. Thus the current generated from the magnets lead to different sound characteristics.
A very useful way of creating space for guitars in the final mix is to use tunable high-pass and low-pass filters to remove extreme frequencies that do nothing to enhance the guitar tone, but invade the space of other instruments that do perform in those areas. Generally speaking, it’s worth losing everything below 80Hz, although it’s not unusual to set the filter a good degree higher. Shaving off some high end may also be useful to help place the guitar in a specific area of the audio spectrum. Filter at the mixing stage, as the sound of the recording will often determine the optimum filtering points.
Personally, I don't like the fender and gibson knockoffs, and squire's aren't the best brand, but I have a squire telecaster, which is actually great quality, better than I expected, and it has a slightly more drier, shaky tone that an actual tele, which is a nice feature. My friend has a squire precision bass, and upon hearing it, I honestly thought it was an actual precision bass at first, so, if you must get squire, than consider either the tele or the precision.
Phasers, also called phase shifters, duplicate the original waveform of a guitar’s output, and shift one wave out of phase with the other. They blend both waves together usually applying an oscillating circuit, resulting in the waves moving in and out of phase with each other creating spacey, “whooshing” effects. “Itchycoo Park” by the Small Faces was an early example of phase shifting in a recording. Eddie Van Halen and Queen’s Brian May often used phase effects in the 1970s and ‘80s.
Description: Flamed 10-Top, Gold Hardware Model. Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Gold, 1x Volume Control, 1x Tone Control, 5-Way Switch, Locking Tuners - Pickups: Dragon II - String Instrument Finish: Blue Mateo, Ruby, Gold Metallic, Whale Blue, Dark Cherry Sunburst, Violin Amber Sunburst, Emerald Green, Vintage Yellow, Black Sunburst, Gray Black, Natural, Black, Amber, Tobacco Sunburst, Orange, Black Cherry, Vintage Natural
Whilst we’re on the subject of practice amps, we have to talk about the amazing BOSS Katana-Mini Guitar Amplifier. This little powerhouse of tone makes our best cheap amps that don’t suck list due to its immense sound, portability and inspiring tones within. Coming straight out of the acclaimed BOSS Katana series, the Katana-Mini uses the authentic multi-stage analog gain circuitry which allows you to select from three classic sound settings - Brown, Crunch, and Clean and enjoy a selection of fantastic sonic options. On top of that you have a classic 3 band EQ to dial in your perfect sound as well as an onboard tape-style delay.
If you haven’t heard Colin Hay’s acoustic version of “Overkill” from his solo album ‘Man @ Work’, you haven’t really heard this song. This has been my favorite acoustic guitar song for some time now. I like the mainstream version, but this one blows it away. For a taste, try listening to it as a sample on iTunes or amazon. BTW, if you decide to download it, DO NOT get the much shorter edited version off of the ‘Scrubs’ soundtrack.
20 pages, black and white with color front cover. In the middle of 1981, Rosetti took over distribution of the Gibson line in the UK. Rosetti were a very big name in Britain, having distributed Epiphone since at least 1963, as well as Hagstrom and others. This catalogue was produced at the tail end of 1981, and introduces a number of models to the UK, such as the MV-II, MV-X guitars and the Victory basses, the GGC-700 and the Flying V bass. Some of these models were so short-lived that they were actually never included in US brochures. The cover image (reproduced in part here) showed some of the earliest demonstration models, including a Victory with a highly unusual white scratchplate.
Get it tuned up and play it in the store. Some people may find this uncomfortable, being a newbie and all. If you don't want to play it, just start bending strings, up and down, using the whammy bar; think of it as 'guitar stretching'. Then see how well it stays in tune. If this guitar has no locking nuts on the head, and it still stays in tune, it's a winner. But if you have to re-tune more than a little, and almost all the strings, pass on it. You will grow frustrated by it very quickly.
Remember how we said that Ibanez has some pretty rad entry level guitars? Well, Ibanez GRX70QATBB is one that is worth mentioning. It belongs to the legendary GRX family, and brings a well-balanced performance for the money. I actually bought one of these for my nephew, and had to put it through its paces before I handed it over. It’s a bit rough around the edges, but one visit to a guitar shop took care of that.
So far so obvious, right? But what's easy to miss is that this same scale shape also gives you A major and D major - they are the same chord shape, just starting on different strings. Now it's true that they're not quite the same physical shape, but that's just because of the funny little tuning 'kink' between the G and B strings (See Why is the guitar tuned like it is?). Once you iron that out, E, A and D are the same shape, as are the barre F and B chords.

This funky looking piece is a vintage Japanese-built Bruno MaxiTone semi-hollow guitar with a sunburst finish and two single-coil pickups with a 3-way blade pickup switch. We love the old Japanese electric guitars of the '60s where they had great looking retro cosmetics, such as this one with pearloid pickguard as well as pearloid base plates underneath the pickups. The guitar is in good playing condition, the vibrato tailpiece has been anchored with a screw in lieu of the spring, and there is a chip in the plastic mounting piece of the neck pickup. The guitar plays great and has a cool vintage Garage Rock tone to it!
Note from the Editors: While exploring the “Psychology of Tone” last month, we learned that digging into the mushiest part of any signal chain (the listener’s noodle) leads to a better understanding of the tonal journey involved. The journey itself may be more important than you realize. We continue this series dedicated to messing with your head with a look at the science involved with the creation of those tones. Everything can be explained with science, right?
For electric guitar amplifiers, there is often[vague] a distinction between "practice" or "recording studio" guitar amps, with output power ratings of less than one watt to 20 watts, and "performance" or "stage" amps of 30 watts or higher.[citation needed] Traditionally,[according to whom?] these have been fixed-power amplifiers,[jargon] with some models having a half-power switch to slightly reduce the listening volume while preserving power-tube distortion.
Yes...I've seen a VST guitar plugin (can't remember the name) where you play chords on the keyboard with the left hand and the software converts them into guitar chord voicings, then you "strum" with the right hand by hitting different keys....and each key does something different...up-strum, down-strum, rake, mute, etc. I actually thought it sounded pretty damn good considering. Definitely close enough for background rhythm guitar work.

A combo amp contains the amplifier and one or more speakers in a single cabinet. In a "head and speaker cabinet" configuration, the amplifier and speaker each have their own cabinet. The amplifier (head) may drive one or more speaker cabinets. In the 1920s, guitarists played through public address amplifiers, but by the 1940s, this was uncommon. A rare exception in the 1990s was grunge guitarist Kurt Cobain, who used four 800 watt PA amplifiers in his early guitar set-up.
We carry many new and ‘lightly’ used instruments. So called “low mileage” instruments, in near mint condition, are our specialty. Currently in house: Santa Cruz, Bourgeois, Eastman, Fender, Larrivee, Martin, Epiphone, Gibson, Gretsch, Guild, Giebitz, Huss & Dalton, Sobell, New World Classical Guitars, Cordoba Classical Guitars, Loar, Recording King, G&L, LsL, Breedlove. Amps from Magnatone, […]

The specifications of the neck and string setup dictate the guitar's overall playability. As such, it is important to get a handle of important specs which include scale length (the length by which the string is stretched from the bridge saddle to the nut), nut width, fingerboard radius, and neck profile (shape of the back of the neck). Beginners normally want guitars to play easier, and will prefer those with shorter scale length, thin nut width and neck profile, and flatter fingerboard radius. On the other hand, experienced players will have grown accustomed to a specific neck configuration, if this is your case, you will want your new guitar to have similar specs to what you already like.

Someone recently posted one of my pedal demos in a thread on a guitar forum and stated that he really liked the sound of the pedal in the demo. Another forum member chimed in and said that for some reason, everything I play through usually sounds good. Shortly after, forum member “Squank” replied, “It’s a talent. Most gear can be dialed in to sound at least decent.”
The three Teisco amps included the Teisco-88, the AMP-71R and the Miny. No details are available on these, but they were fairly rectangular cabinets with top-mounted controls. The Teisco-88 had “Teisco” and a big “88” on the grillcloth. The ’66 model was a tube amp, so this likely was, as well. I suspect the others shown were tubers as well. The Miny had the italicized T logo on the front. The AMP-71R had reverb.
At Ibanez, there has always been a goal to be anything but traditional. For over half a century, Ibanez has been pushing the world of guitar manufacturing forward, consistently breaking new ground. It's this drive that led them to become one of the first Japanese musical instrument companies to make a name for themselves in Europe and North America. With unparalleled commitment to quality, Ibanez Guitars are considered among the upper echelon by musicians of all playing styles around the world. A quick look at some of the musicians who play Ibanez guitars is sure to leave you very impressed. Artists such as Head and Munky of KoRn, Noodles of the Offspring, Mick Thomson of Slipknot, Fletcher Dragge of Pennywise, Steve Vai, and Joe Satriani all trust their sound to Ibanez guitars. Now it's your turn to do the same. Ibanez makes an impressively wide selection of guitars, so you're sure to be able to find one that is perfect for you here. Say, for example, you're a beginner who's looking for a great acoustic guitar? If that's the case, you'll love the JamPack IJV50 Quickstart Dreadnought Acoustic Guitar Pack. This set features everything you need to get started, including a beautiful dreadnought, as well as an electric tuner, a gig bag, a guitar strap, and an accessory pouch. If you'd rather a versatile acoustic-electric, you'll love an option such as the V70CE Acoustic-Electric Guitar. This guitar is highlighted by its outstanding playability and fantastic tone. With an incredible response and dynamic range, this guitar is perfectly suited for small clubs and larger venues alike. Of course, if all you want to do is plug in and pump up the volume, you're going to want to check out the JS1200 Joe Satriani Signature Guitar. This candy apple dream is built with top-tier electronics and sleek overall construction. With a resonant tone an impressive sustain (thanks, in part, to its DiMarzio humbuckers), this guitar is a progressive player's dream. Regardless of your playing style, there's an Ibanez here with your name on it that is ready to be played. With expertise that is second to none, Ibanez is a name you can trust in the music world.
Well built, beautiful rich sound and stays tuned. Made in Canada by the Godin family. The slim neck and close action makes it easy to play for those with smaller hands. I have the black Songsmith and will never part with it. Many of my friends and family thought I had spent $1000 to $1500 for it and were really surprised at the price under $400. Godin makes a nice case for it and all of their guitars for around $120.00. Definitely should be in the top 10 of best acoustic guitars!
After the lawsuit Hoshino Gakki abandoned the strategy of copying "classic" USA electric guitar designs and moved to the popular superstrat era in the mid-1980s. The newer Ibanez models began incorporating more modern elements into their design such as radical body shapes, slimmer necks, 2-octave fingerboards, slim pointed headstocks, higher-output electronics, humbucker/single-coil/humbucker pickups, locking tremolo bridges and different finishes.
Introduced in 1948, the Fender Deluxe was praised for its dynamic, harmonically rich overdrive and compression. It was offered in numerous configurations and designs over the years, but the most desirable model is the 5E3 narrow-panel Deluxe, built from 1955 to 1960 and offered in a tweed-covered cabinet. The circuit runs at higher voltages than other models and features a split-phase inverter and driver that add a little gritty breakup at the start of the output stage.
Dobro – we’re still in Dobro territory here, not National – quickly followed suit in 1934 with the Dobro Electric Resophonic guitar. This was basically a wood-bodied Dobro resonator guitar with a Stimson pickup just in front of the handrest. Unlike the All-Electric, this had the poles perpendicular to the strings. This also did not especially go over, and dropped from sight before the year was up.
The OM model came about due to Perry Bechtel, who was a virtuoso plectrum banjo player. Perry came to see the Martin family in the early summer of 1929. He wanted Martin to make him a guitar which he could easily adapt his banjo style (remember by the late 1920s guitar was the hot instrument, replacing the banjo). He requested 15 frets clear of the body and a 27" scale in Martin's largest standard body size (which at that time was the 000, with 12 frets clear of the neck). The 27" scale would retain the fret spacing of the plectrum banjo, and 15 frets clear of the body would closely resemble the length of a banjo neck.
{ "thumbImageID": "SR300E-4-String-Electric-Bass-Black-Planet-Matte/J27307000009000", "defaultDisplayName": "Ibanez SR300E 4-String Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Navy Planet Matte", "sku": "sku:site51500000177839", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "466.65", "priceVisibility": "1", "skuUrl": "/Ibanez/SR300E-4-String-Electric-Bass-Navy-Planet-Matte-1500000177839.gc", "skuImageId": "SR300E-4-String-Electric-Bass-Navy-Planet-Matte/J27307000010000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SR300E-4-String-Electric-Bass-Navy-Planet-Matte/J27307000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black Planet Matte", "sku": "sku:site51500000177838", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "466.65", "priceVisibility": "1", "skuUrl": "/Ibanez/SR300E-4-String-Electric-Bass-Black-Planet-Matte-1500000177838.gc", "skuImageId": "SR300E-4-String-Electric-Bass-Black-Planet-Matte/J27307000009000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SR300E-4-String-Electric-Bass-Black-Planet-Matte/J27307000009000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ocean Fade Metallic", "sku": "sku:site51500000032773", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "466.65", "priceVisibility": "1", "skuUrl": "/Ibanez/SR300E-4-String-Electric-Bass-Ocean-Fade-Metallic-1500000032773.gc", "skuImageId": "SR300E-4-String-Electric-Bass-Ocean-Fade-Metallic/J27307000008000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SR300E-4-String-Electric-Bass-Ocean-Fade-Metallic/J27307000008000-00-60x60.jpg", "imgAlt": "" } , { "name": "Pearl Black Fade Metallic", "sku": "sku:site51500000015476", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "466.65", "priceVisibility": "1", "skuUrl": "/Ibanez/SR300E-4-String-Electric-Bass-Pearl-Black-Fade-Metallic-1500000015476.gc", "skuImageId": "SR300E-4-String-Electric-Bass-Pearl-Black-Fade-Metallic/J27307000007000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SR300E-4-String-Electric-Bass-Pearl-Black-Fade-Metallic/J27307000007000-00-60x60.jpg", "imgAlt": "" } , { "name": "Autumn Fade Metallic", "sku": "sku:site51500000015477", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "466.65", "priceVisibility": "1", "skuUrl": "/Ibanez/SR300E-4-String-Electric-Bass-Autumn-Fade-Metallic-1500000015477.gc", "skuImageId": "SR300E-4-String-Electric-Bass-Autumn-Fade-Metallic/J27307000006000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SR300E-4-String-Electric-Bass-Autumn-Fade-Metallic/J27307000006000-00-60x60.jpg", "imgAlt": "" } , { "name": "Iron Pewter", "sku": "sku:site51500000002187", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "466.65", "priceVisibility": "1", "skuUrl": "/Ibanez/SR300E-4-String-Electric-Bass-Iron-Pewter-1500000002187.gc", "skuImageId": "SR300E-4-String-Electric-Bass-Iron-Pewter/J27307000003000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SR300E-4-String-Electric-Bass-Iron-Pewter/J27307000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Metallic Gray", "sku": "sku:site51441207059458", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "466.65", "priceVisibility": "1", "skuUrl": "/Ibanez/SR300E-4-String-Electric-Bass-Metallic-Gray-1441207059458.gc", "skuImageId": "SR300E-4-String-Electric-Bass-Metallic-Gray/J27307000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/SR300E-4-String-Electric-Bass-Metallic-Gray/J27307000001000-00-60x60.jpg", "imgAlt": "" } ] }

This product was not working and parts were defect. I don't know how some people made it works. The instruction was terrible and seller's wires description photos are more worse. I did not expect much for this little toy. Just piece of the junk. I was tried to return, but the seller said that I had to pay return shipping and he gave me a fake return shipping address.
Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.
Music is an art, which can create pleasure in our mind. We can do it with the help of a good musical instruments like guitar, flute, harmonium etc. This art has the power to change our mood. Here we are introducing top ten best guitar brands with price in India. These brands are providing high quality guitar. Most of the musicians choose these brands. All are ensuring high performance. Some of the companies provide quality guitar at affordable prices. Our list covers ten well known company. They offer wide range of guitars. If you are looking for a good guitar brand, check out our list.

Semi-hollow, slim, and designed with a comfortable ‘C’ shape exterior, the D’Angelico EX-DC Standard is a high-price electric guitar with professional grade features. Creating a more natural tone that delivers an organic quality to its sound, the Standard guitar uses Kent Armstrong Vintage humbuckers for a focused sound free of excess reverberation. The Super-Rotomatic tuners maintain their tuning accuracy for a longer time, due in part to the turning radius within the design. Strings remain at a comfortable tension due to the unique Stairstep tailpiece, creating both a strong resonant sound and assured sturdiness. A semi-hollow body designed with maple on the top and back, other features include a 3-way toggle that provides two modes of volume as well as two separate tones. Meant for use throughout various genres of music, the EX-DC Standard is an electric guitar to please the masses.

Here we ( SOLD ) are very proud to offer a USA built Martin Acoustic electric the model # JC-16RGTe.... More info soon to come and more pics as well... near mint condition like new! Everyone from Eric Clapton to Sting to Johnny Lang has played a Martin guitar, and professionals and amateurs alike know the bright sparkle and deep, resonant tone that Martin guitars have become famous for, from the most high end acoustics to the Backpacker. Carefully hand-selected tonewoods, master craftsmanship and beautiful finishes and styles make Martin acoustics a class all their own, and must be played to be believed. Martin sets the standard for acoustic guitars, and since 1833 has been a leader in guitar innovation and craftsmanship. The following info is from Martin. Martin JC16RGTE Features: * CONSTRUCTION: 1 Style; Ply Blocks; Mortise/Tenon Neck Joint * BODY SIZE: D-14 Fret CUTAWAY * TOP: Solid Sitka Spruce * ROSETTE: Bold Herringbone * TOP BRACING PATTERN: D1 Hybrid * TOP BRACES: 1 Style/Scalloped * BACK MATERIAL: Solid East Indian Rosewood * SIDE MATERIAL: Solid East Indian Rosewood * ENDPIECE: White Boltaron® * ENDPIECE INLAY: Black/White Boltaron® * BINDING: White Boltaron® * TOP INLAY STYLE: Multiple Black/White * NECK MATERIAL: Solid Spanish Cedar * NECK SHAPE: Modified Low Oval * NUT MATERIAL: White Corian® * HEADSTOCK: Solid/6 String No Diamond/Standard Taper * HEADPLATE: Solid East Indian Rosewood/ Raised Gold Foil Logo * HEELCAP: Solid East Indian Rosewood * FINGERBOARD MATERIAL: Black Micarta® * SCALE LENGTH: 25.4" * # OF FRETS CLEAR: 14 * # OF FRETS TOTAL: 20 * FINGERBOARD WIDTH AT NUT: 1 11/16" * FINGERBOARD WIDTH AT 12TH FRET: 2 1/8" * FINGERBOARD POSITION INLAYS: 28 Style * FINGERBOARD BINDING: White Boltaron® * FINISH BACK & SIDES: Semi Gloss/ Dark Filler * FINISH TOP: Polished Gloss * FINISH NECK: Semi Gloss/ Dark Mahogany Stain/ Dark Filler * BRIDGE MATERIAL: Black Micarta * BRIDGE STYLE: 1 Style Belly * BRIDGE STRING SPACING: 2 1/8" * SADDLE: 16" Radius/Compensated/White Micarta® * TUNING MACHINES: Chrome w/ Small Knobs * RECOMMENDED STRINGS: Martin MSP 4100 Light Phosphor Bronze * BRIDGE & END PINS: White w/ Black Dots * PICKGUARD: I-02 Tortoise Color * ELECTRONICS: Fishman® Prefix Premium Stereo Onboard Blender .

For any venue, it's important to bring along the right amp. A huge amp in a tiny club is not only overkill; it's also extra setup work that you can avoid altogether with a smaller combo amp. On the flipside, a little amp in a big theatre could mean that some of the audience won't even hear you. Take your time deciding what the best option is for you.
The biggest issue when starting out is not to get any bad habits with picking or hand/finger positioning. I'd highly recommend to find a teacher who - not necessarily on a periodical basis - would take a closer look at your progress and technique and make adjustments when needed. There are lots of bad habits that you can get and I'd rather spend some money on lessons than weeks of lifetime to undo those.
{ "thumbImageID": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "defaultDisplayName": "Lakland Skyline Deluxe 55-02 5-String Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Maple Fretboard", "sku": "sku:site51274115060918", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard-1274115060918.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063", "brandName": "Lakland", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Skyline-Deluxe-55-02-5-String-Bass-Natural-Maple-Fretboard/517707000010063-00-60x60.jpg", "imgAlt": "" } , { "name": "Cherry Sunburst Maple Fretboard", "sku": "sku:site51274115060902", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard-1274115060902.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard/517707000020063", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Skyline-Deluxe-55-02-5-String-Bass-Cherry-Sunburst-Maple-Fretboard/517707000020063-00-60x60.jpg", "imgAlt": "" } , { "name": "3-Color Sunburst Rosewood Fretboard", "sku": "sku:site51274115060911", "price": "1,499.00", "regularPrice": "1,499.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Lakland/Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard-1274115060911.gc", "skuImageId": "Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard/517707000064069", "brandName": "Lakland", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Skyline-Deluxe-55-02-5-String-Bass-3-Color-Sunburst-Rosewood-Fretboard/517707000064069-00-60x60.jpg", "imgAlt": "" } ] }
Every skilled worker needs to look after their tools and musicians are no exception. Sure, wear and tear is normal—especially when you play your instrument often—but a little T.L.C. will ensure your musical gear continues to look, play and sound amazing for years. At Guitar Center Repairs, you'll find a dedicated team of certified musicians who take pride in helping you reach your highest level of playing potential. Make no mistake, your music maker is in the best of hands at GC Repairs. When it comes to looking after your musical equipment, certain things should be left to professionals—pickup installation, wiring customization and structural repair, to name a few. Mind you, there are tasks that every guitarist can take care of at home, including regular polishing and restringing. Of course, not everyone has the time to continually look after their instrument and bringing it to Guitar Center is a great way to save yourself time and ensure that the job gets done right. With that being said, GC's services go well beyond cleaning and string changing. For those of you who own a stringed instrument and find the action is higher than it once was, a truss rod adjustment is definitely in order. Or, maybe you want to personalize the look and sound of your guitar—in which case, an expert will be more than happy to swipe out your pickups for a new set, replace the pickguard or perform any other task to give you an axe that’s entirely your own. Honestly, your best bet is to browse this entire section and see what else is offered in the way of repairs, maintenance and modifications. Who knows, maybe your local GC is having a free guitar setup day, so feel free to have a look around this page or take a swing by the store in your area. Our friendly and knowledgeable staff is always happy to speak with other local musicians and setting up a quick appointment for your instrument will do wonders for your musical enjoyment. From nut and bridge replacements to even amp electronic upgrades, Guitar Center Repairs has you covered.
Minor chords arise as the tonic notes of minor keys that share the same key signature with major keys. From the major key's I-ii-iii-IV-V-vi-viio progression, the "secondary" (minor) triads ii-iii-vi appear in the relative minor key's corresponding chord progression as i-iv-v (or i-iv-V or i-iv-V7): For example, from C's vi-ii-iii progression Am-Dm-Em, the chord Em is often played as E or E7 in a minor chord progression.[24] Among basic chords, the minor chords (D,E,A) are the tonic chords of the relative minors of the three major-keys (F,G,C):
While electric bass players have used regular guitar amplifiers in large concerts since the 1960s, this is usually just for the higher register; a bass amp is still typically used for the low register, because regular guitar amps are only designed to go down to about 80 Hz. One of the reasons bassists split their signal into a bass amp and an electric guitar amp is because this arrangement enables them to overdrive the higher-register sound from the electric guitar amp, while retaining the deep bass tone from the bass amp. Naturally-produced overdrive on bass obtained by cranking a tube amplifier or solid-state preamplifier typically results in a loss of bass tone, because when pushed into overdrive, a note goes to the upper octave second harmonic.
Beginner amps aren’t going to be packed with features, but they should include good clean and distortion sounds, plus a decent EQ layout to shape your tone. Part of your journey as a newbie guitarist will include discovering what tones you like and don’t like, and that’s hard to do with a cheap amp that only produces one generic sound. If your first amp has some reverb or onboard effects, that’s a bonus.
The Vintage Modified Jazzmaster has the tried-and-tested dual circuitry of the original models from the ’60s. The “Rhythm” circuit activates only the neck pickup, while the “Lead” circuit lets you pick between neck, bridge and both at the same time. Each circuit has its own dedicated master volume and tone knobs. (In comparison, the Fender American Professional Jazzmasters don’t have this circuitry.)
Several years after his last adventure, retired fortune hunter, Nathan Drake, is forced back into the world of thieves. With the stakes much more personal, Drake embarks on a globe-trotting journey in pursuit of a historical conspiracy behind a fabled pirate treasure. His greatest adventure will test his physical limits, his resolve, and ultimately what he's willing to sacrifice to save the ones he loves.
On round hole martin guitars, the serial and model numbers are stamped on the neck block inside the instrument. The number can be seen by looking inside the sound hole. Look at an angle towards the neck. All f-hole Martin archtops have their serial and model numbers stamped on the inside center of the backstripe, roughly under the shadow of the bridge (and best seen from the bass side "f" hole).
On regular occasion I have stuff come through to me after the instrument owner has already taken it to another shop that, for whatever reason, could not fix or solve the problem. This time, a supposedly professional and legitimate shop... and after the customer PAID FOR WORK THAT DID NOT YEILD THE DESIRED RESULTS. That just boggles my mind a bit. I would never charge a customer unless they are happy and satisfied with my work.
A tremolo pedal takes your signal and chops it up, making it sound like the volume is dropping and reappearing very quickly. Imagine what it would sound like whilst holding a note and turning the volume down on your amp and back up again and you’ll get the idea. A tremolo allows you to change the speed at which the volume drops happen and how severe the cut off is. You can have it set to completely cut your sound out or just gate it, which allows a certain amount of sound through at each interval. The BOSS TR2 Tremolo is one of our favourites here at PMT.
The musical revolutions occurring during the period in question created the first well-known guitar heroes, and gave their guitars iconic status. It is no surprise that the right guitar can immediately conjure a specific period in time, both with looks and sound. And modern day guitarists who want to capture an essence of that period will naturally tend towards these guitars. Nothing says 1950s quite like a Gretsch. Nothing says 1960s quite like a Vox teardrop or Phantom.
The Red Hot Chili Peppers always knew how to rock a party; it took John Frusciante to turn them into an arena-packing band with a sound they could call their own. Frusciante is a remarkably elastic stylist and a gifted sculptural arranger who pushed the Chilis to explore new worlds without getting in the way of their funk-pumped energy; he beefed up their sound with both well-placed fire (the volcanic, Hendrix-style solo on “Dani California”) and remarkable elegance (the indelible opening chords of “Under the Bridge”).

You have so many effects on this that you’ll find it difficult to get bored, all of which have been modelled on some of the most iconic sounds in effects pedal history including Boss, Line 6, Electro Harmonix, Z Vex and more. You have a huge amount of distortions, delays, reverbs, modulations, pitch/synth/filters, compressors/limiters, EQs, wahs, and even a looper to sculpt your sound with, all of which have been meticulously modelled to include the subtlest qualities and sound abnormalities that made these effects and their respective pedals so revered.

Harry Rosenbloom, founder of the (now-bankrupt) Medley Music of Bryn Mawr, Pennsylvania, was manufacturing handmade guitars under the name "Elger." By 1965 Rosenbloom had decided to stop manufacturing guitars and chose to become the exclusive North American distributor for Ibanez guitars. In September of 1972 Hoshino began a partnership with Elger Guitars to import guitars from Japan. In September of 1981, Elger was renamed "Hoshino U.S.A.", retaining the company headquarters in Bensalem, Pennsylvania as a distribution and quality-control center.
Stephen Ray Vaughan, known as Stevie Ray Vaughan, was an American musician, singer, songwriter, and record producer. In spite of a short-lived mainstream career spanning seven years, he is widely considered one of the most influential electric guitarists in the history of blues music, and one of the most important figures in the revival of blues in the 1980s. AllMusic describes him as "a rocking powerhouse of a guitarist who gave blues a burst of momentum in the '80s, with influence still felt long after his tragic death." Born and raised in Dallas, Texas, Vaughan began playing guitar at the age of seven, inspired by his older brother Jimmie. In 1971 he dropped out of high school, and moved ...more on Wikipedia
Analyzing the notes you are playing plays an important role while you are performing. The built-in chromatic tuner in these pedals shows you the live feed of your notes whether they are sharp, flat or dead. Similarly, one can bypass the currently selected sound fx for maintaining a pure sound when tuning or completely mute the signal for a uniform silence.
It's not subjective. When you're setting up a guitar you measure the height of the strings, typically you're at about 4/64" for the high E and 5/64" for the low E. You can go above or below the recommendation but if you go too low you can start to get a bit of fret buzz. How low you can go is not a function so much of what guitar you own, but how level your frets are and your neck relief. Most good guitars can be set up to play "fast". Obviously they don't get faster when you paint them fluorescent orange, or make the headstock pointy.
I bought an effects pedal off eBay a couple of weeks ago that was defective. Anyone acquainted with eBay's horrendous customer service knows that it's far less hassle to just eat the cost of repairs rather than try to get a guy in India to understand and help with the problem. Enter Kevin at Grumpy's Guitars. He immediately opened up the pedal and fixed it while I hung out with him and played a beautiful old Juzek half-size bass and browsed through his small but comfortable, remarkably cool store. Half an hour later, I'm holding my repaired pedal, which, I might add, he also did some extensive preventative maintenance on, and he asks me for $10! Most places charge a $60 bench fee just to open the sucker up! I insisted on tipping him another $20, not only because he deserved it, but also because I still got out with my problem solved at less than half what most places would charge. It's nice to see someone running a business according to good old-fashioned ethical principles. Thanks, Kevin.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category2"}

Description: Body: Alder - Top Wood: Maple - Flamed - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 48mm - Fingerboard: Maple - Frets: 24, Jumbo - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 4+3 - Bridge: Floyd Rose Speedloader - Bridge Construction: Maple - Cutaway: Double - Hardware: ESP Tuners, Black, 1x Volume Control, 3-Way Switch - Pickups: Dimarzio Crunchlab 7/LiquiFire 7 - String Instrument Finish: See-Thru Black
The SD is a classic. This had a more exaggerated Jazzmaster shape than the T-60. It had a dramatically swept back lower horn, and an offset pair of waists, looking as though it’s been slightly melted. These had bolt-on necks with the elongated Strat-style head, with round logo stickers. A rectangular plastic control panel was mounted above the strings, with large thumbwheel controls and on/off rocker switches, while a large-ish pickguard was mounted under the strings. The controls on the SD-4L were especially interesting, taking their cue from the Italians, no doubt. The thumbwheels were for volume and tone, while there were a total of six rocker switches. Four of these were on/off for each of the four pickups, but in between were two more. Their function is unknown, but a good guess would be phase reversal between the front and back pairs of pickups. Both models had the rectangular fingerboard edge inlays. With “L” designations, both had vibratos. These consisted of a fairly simple bar for string attachment with a series of springs behind it, all covered with a hinged metal cover. The handle was extremely long. Pickups were the beefy tall rectangular type with metal cases and black plastic center tops with exposed pole pieces (these could be screws or squares). The SD-4L had four pickups, in two pairs, while the SD-2L had two. If I couldn’t have a Spectrum 5, I’d be looking for one of these (I am!).
Launch price: $4,149 / £2,999 | Body: 3-piece maple/poplar/maple with figured maple top | Neck: Mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x MHS Alnico II humbuckers | Controls: 2x volume, 2x tone, 3-way selector switch | Hardware: ABR-1 bridge with titanium inserts and stopbar tailpiece | Left-handed: Yes | Finish: Sunburst
• Fast Fingers: If speed’s the goal, most shred-heads prefer light gauge strings. They’re easy to bend and promote fast playing by offering less resistance to the fretting and picking hands. Since guitar strings are measured in thousandths of an inch, the typical recommended gauge for players planning to burn in standard tuning are .009s, available in every guitar shop.
4) SPAM AND SELF-ADVERTISING ARE NOT ALLOWED. NO ADVERTISING YOUR NEW SUB. NO LINKS TO SOCIAL MEDIA, BLOGS, OR OTHER PERSONAL SITES. This includes the comment area of youtube videos as well as anything that's embedded into the video itself. Your content will be removed!!! NO ADVERTISING EVEN BY PROXY Ask yourself if you're here to post a video of yourself playing guitar or to gain subscribers/fans. If it's the later, you are in the wrong place. We are not here to make you more popular. This means no linking to anything that is commerce related, your blog, web site, bandcamp, facebook, instagram, snapchat, twitter, etc. You can link to your youtube channel, but do NOT have channel plugs/ads in your video, subscription requests, or links to any of the aforementioned, unless you are on our whitelist. If you would like to be considered for our whitelist, message the mods!
If it helps, Schaller have very accurate drawings of all their hardware on their website. You can also get very good drawings of all Gotoh parts as well, but theirs are harder to find (hidden in the parent company's site and I can't recall the full details). It is worth having a look at those, and pay attention to the way the tuning posts are shaped. That radiused section turned into the post is important , it really helps lock the strings firmly.
The Eastcoast Vintage T Series Custom Electric Guitar seen here in Flame Red is a cheap electric guitar that certainly doesn’t suck! It features appointments usually associated with higher tier guitars such as a solid alder body and hard maple neck. In addition, you have a high quality 22 fret rosewood fingerboard as well as 2 x single coil pickups to achieve a wide variety of tones from rock to blues to country – this thing can handle it all. The “T” style bridge is a great feature often found on guitars 3 x the price. A fantastic option and an extremely hard working, handmade guitar for those in need of a high quality first guitar or a great second option for the studio or stage.
I've had it for a few months and have been using it at shows. It has become erratic. The patch I use most often occasionally oscillates. It's like microphonic feedback (not guitar sustaining feedback). The output level seems to change on it's own as well. I will say I found an amazing sound with the marshall 800 emulation but the inconsistency makes it unusable live. It is possible it's not the unit but a power supply problem or connection, but I have not seem the power go off and other devices on the same power supply work fine. I have ordered the digitech 360xp since I had used that brand for 15 years or more with no issue.
Two and a half steps down from standard tuning. Used in Swedish death metal by bands such as At The Gates, Dismember, Edge of Sanity, Entombed, Amon Amarth, and Arch Enemy (during the Johan Liiva era), as well as Fear Factory, Carcass, Type O Negative, Cathedral, Seventh Void, Fleshgod Apocalypse, Sepultura, Five Finger Death Punch, Soulfly, Within Temptation, Triptykon and guitarist Kirk Windstein of Crowbar and Kingdom of Sorrow.
This D-15M dreadnought features a solid 'genuine' (South American) mahogany top over A-Frame X bracing; the same material is used for the back, sides and neck. The neck profile is a 'modified low oval', and it's hard to imagine anyone having a problem with it. Bone nut and saddle: check. Vintage-style, open-gear tuners check. Super-thin matt nitrocellulose finish all over: check. Tonally, there is a rich and projecting core sound that's complemented by the unmistakable, Martin D-resonance. It's vibrant and ebullient, yet not brash; warm and full without being thick or indistinct. It puts every single cent of its build budget into making the best sounding and playing instrument, with very little concession to cosmetics, electronics or anything else. Solid woods, improved neck joint, bone nut and saddle, no frills whatsoever, save for the 'burst – it's unreservedly recommended.
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions- opens in a new window or tab ... Read moreabout the condition
Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.
Steve's a great technician. He's done a great job on every single guitar I've brought to him. Helpful, easy going, friendly, and extremely good at what he does. After the first setup he did for me I stopped looking for other repair shops in town. He's just too good and is a pleasure to do business with. I hesitate giving 5 star reviews, but anyone who can turn a nigh-unplayable Dano baritone into a gigging instrument deserves it. Highly recommended.
Bottom Line: The Line 6 HD500X is incredibly in-depth in the amount of options and editability it gives you. Doing all of it from the small screen on the actual unit is headache-inducing, but if you have a computer you can hook it up via USB and edit your sounds from there much more easily. There’s more of a learning curve with the HD500X than there is with the Zoom G3X, but the presets are decent enough and allow you to audition it if you’re the impatient type. Where the HD500X lacks is that it’s less of an immediate-gratification pedal, and it’s hard to tweak on-the-fly and come up with potentially inspirational sounds. Because of how the interface is, this is definitely more of a “sit down with headphones and tinker with it to get your perfect sound” type unit. If the effects quality of the Zoom G3X is a 7/10, the Line 6 HD500X is an 8.5/10. This is the one to get if you’re the type that likes to dig in and have control over every little thing. The price tag is a little on the high side, but considering what a powerhouse this unit is, it’s definitely not unreasonable.
GUITAR BLEND/BALANCE POT, 500KA.  Bourns dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. 1/4" knurled shaft diameter. Solder lugs. 3/8" bushing.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special MN taper used for balance/blend pots.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
Here's a fresh one from the JVG Vault... vintage tone much like an old classic Martin Acoustic has some wear and has the "feel" just feels great in your hands and plays & sounds wonderful. Good volume and rich sounding lows and very nice.. condition rated at a solid 8.5 / 10 or better no cracks no repairs and plays nicely with original nut & saddle still in place , optional change nut & saddle & set up add $80.00. Please SEE MORE FULL SCREEN HIGH RES PICTURES HERE: https://picasaweb.google.com/gr8bids/70sYamahaFG140RedLableLikeFG180?authkey=Gv1sRgCIHmw573kYa6HA#slideshow/5634523767539294722.
1928 to 1967: Tortoise grain celluloid pickguards glued directly to the top, clear finish then applied over top and pickguard. Due to extreme shrinkage of celluloid and lacquer, this often causes a "pickguard crack" in the top. Pickguards became "standard" in 1931 on most models, but some martin guitars had them as early as 1928. The OM series was the first model to consistently have a pickguard in 1930.
Taylor also has a Build-To-Order program that allows anyone to design their very own guitar. There’s an extensive menu of guitar options starting from tonewoods, including species and grades that aren’t offered through Taylor’s standard line; inlay, binding and purfling options; finish options such as solid colors, sunburst, or vintage finishes; wood accents like a backstrap, armrest or truss rod cover; neck options such as scale length and neck profiles; and finally body shapes including the deep-body Dreadnought and the new Grand Orchestra.
Anyway, as the Strat-style guitars have three pickups, the selector switch works like this: all the way to the left (relative to the Jimi pic) would limit the guitar’s output to the sound of the neck pickup. One position to the right will blend the neck pickup with the middle pickup. Put the switch in the middle, and you’ll get just the sound of the middle pickup, as you may have guessed. The next position will blend the middle and bridge pickups, and all the way to the right, it’s all bridge pickup.

Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.

Been meaning to try this for years.... Should have done it earlier! It really works well for me, despite a puny Atom cpu in an HP netbook and a kludged lead from an electric Ukulele stuck into the microphone socket. Yes, this lash-up can be noisy - the impedances are mismatched, the signal levels too, but a very respectable result indeed. The processing is highly effective and the presets are (of course) variable in their suitability (not every effect is ideal for a ukulele) with gems that include a really decent and surprising choice of autowah effects. Never thought I'd say that. The user interface is logical, but there is a lot of it. That's because it can do so much. Fortunately there is a 'Random' button that creates random new patches for you - keep pushing it and some fun stuff can emerge. Documentation is helpful - press F1 and have a look, it even includes hardware suggestions and hints. I intend to follow that religiously so as to get the best from this gem - and I'll be spending money to get the suggested full fat Behringer interface (~£20) from Amazon, and trying a less-compact machine with some more CPU to see if that adds to the experience. Problems? A couple of the presets do seem to crash Rakarrack - but apart from that irt has been solid. Recommended to give it a go, if you have not already done so. Both guitar an uke work well with this.
An equalizer (more often called EQ) is the device that allows you to adjust certain frequencies within your tone. The 3-band part implies that the EQ offers three points of control: bass, middle and treble. While 3-band is the standard, you can also have 2-Band EQ (which tend to offer just bass and treble), as well as 4-band EQ, 5-band EQ (low-bass, mid-bass, midrange, upper-midrange, treble) and upwards! Of course, the higher the band, the more versatility the amp offers. But 3-band tends to be the easiest to get to grips with.
To show you how to read the chords diagrams above, let's use the A chord as an example. For the purposes of chord diagrams, here is how your left-hand fingers are numbered. As you will notice, the index finger is denoted with number 1 the middle with 2 the ring finger with 3 and the pinky with 4. These numbers are used on the diagrams to show you what fingers use for pressing the frets composing the chords.
A simple, inexpensive amplifier may have only two tone controls, a passive bass and treble control. In some better quality amps, one or more midrange controls are provided. On the most expensive amps, there may be shelving equalizers for bass and treble, a number of mid-range controls (e.g., low mid, mid and high mid), and a graphic equalizer or parametric equalizer. The amplifier's master volume control restricts the amount of signal permitted through to the driver stage and the power amplifier. When using a power attenuator with a tube amplifier, the master volume no longer acts as the master volume control. Instead, the power attenuator's attenuation control controls the power delivered to the speaker, and the amplifier's master volume control determines the amount of power-tube distortion. Power-supply based power reduction is controlled by a knob on the tube power amp, variously labeled "wattage", "power", "scale", "power scale", or "power dampening".
He was no virtuoso, and that's the whole point: By snatching electric guitar from note-shredding technicians and giving it back to artists, freaks and poets, Kurt Cobain became one of the most important players ever. Cobain didn't invent alt-rock. But with his love of Cheap Trick, the Melvins and Kiss, he gave it the metallic power necessary to conquer the world. His playing wasn't all untutored squall, either: See the unconventional chord progression and mastery of quiet-loud-quiet dynamics on "Lithium" – and pretty much every other Nirvana song.
There are also companies like Eastwood Guitars that are releasing their own versions of the Hi-Flier. Available for a pretty low sum, you can get Eastwood’s recreation of a Phase 4 Hi-Flier in both right-handed and lefty configurations. If you don’t find the world of vintage guitars too appealing, but you dig the look and feel of the Hi-Flier, this might be a prime option for you.
I've got a vox white shadow too though its a crimson/red colour with 2 chrome plated humbuckers, it has one volume pot, two tone pots, 1 toggle switch aswell as 2 further switches to change between pick-ups. It has stamped on the back neck plate "made in japan" I can't seem to locate the serial number though. Would love to know more about this guitar.
Launch price: $1,699 / £1,006 | Body: Laminated mahogany, semi-hollow | Neck: 3-piece mahogany/maple/mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x LB-1 humbuckers | Controls: Bridge volume, bridge tone, neck volume, neck tone, 3-way selector | Hardware: Guild Tune-o-matic bridge with rosewood base, Guild vibrato, Grover Sta-Tite open-gear 14:1 tuners | Left-handed: No | Finish: Cherry Red, White, Black
I started playing harmonica when I was a little boy. I used to get pushed out to entertain adults at two o'clock in the morning. I also had a kind of obsession about the guitar. The first actual toy that I had that I loved was a little wooden guitar that my folks brought me from a shop that sold brooms and buckets and stuff like that. I used to carry that guitar around like my friends would carry a football. I took this thing with me everywhere.

Many players use more than one effect – in this case, they place them next to each other on the floor, joining the output of one pedal to the input of the next using a small guitar lead called a “patch lead”. This allows them to use more than one effect at a time and toggle and combine them as they wish. Most players with multiple effects pedals attach them to a board, imaginatively called a… “pedal board”. This makes the pedals easier to transport and carry around. They set up and plug together all the pedals on the board, so when the user gets to a gig they can just plug in and play without having to set everything up again.

Hand built with the same precision as our larger guitars, just 25% smaller.  Great for travel, ideal for children struggling to get their arms around full size guitars, fantastic second guitar for the office.  Because it has a smaller box design our Travel will have a smaller sound (like any smaller guitar) but our Travel Electric with built in auto tuner allows you to plug into any amplifier or PA system giving you the same power as our full size guitars.
Hopefully, that explains the basic components and tools. As mentioned guitar electronics can be a little daunting and my best advice if new to guitar electronics is to avoid seeking out information on guitar related forums as you may leave your head spinning, feeling more daunted than you did in the first place. We will cover the basics here and in most cases that will be more than enough to help you put together a great guitar.

The Ovation Guitar Company, a holding ofKaman Music Corporation, which itself is owned byFender Musical Instruments Corporation, is a guitarmanufacturing company based in New Hartford, Connecticut. Ovation primarily manufactures steel-string acoustic guitars. They have been credited with “by far the most significant developments in the design and construction of acoustic guitars” from the 1960s through the 1980s.[
So, what string gauge is standard for electric guitars? Most new guitars come strung with super-light or light-gauge strings. For beginning guitarists, that’s probably a good place to start. As you develop fretting and picking skills and your fingers gain calluses and strength, you may want to gradually move up to heavier strings, depending on the music you play and the tone you seek. Many guitar manufacturers make specific recommendations about what strings to use. Some produce their own strings or have them custom-manufactured to their specifications.
{ "thumbImageID": "GRX20-Electric-Guitar-Black-Night/519417000787000", "defaultDisplayName": "Ibanez GRX20 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Night", "sku": "sku:site51275776901849", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Black-Night-1275776901849.gc", "skuImageId": "GRX20-Electric-Guitar-Black-Night/519417000787000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GRX20-Electric-Guitar-Black-Night/519417000787000-00-60x60.jpg", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51275776902065", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Jewel-Blue-1275776902065.gc", "skuImageId": "GRX20-Electric-Guitar-Jewel-Blue/519417000085000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GRX20-Electric-Guitar-Jewel-Blue/519417000085000-00-60x60.jpg", "imgAlt": "" } ] }

I think jackson (particularly the USA models) are truly the most versatile of all the high end electric guitars. The build quality is second to none as they are made at the custom shop by very experienced luthiers, the woods used are exotic and tonally superb. The hardware is the best around Floyd rose/ Seymour Duncan's and the action/playability is fantastic. All in all you feel although expensive, you feel like you're getting your monies worth. But the great thing is that they produce an incredible array of sounds which covers all aspects of musical style from the beefed up classic grind of a Gibson, to the stringy percussive violin sounds of a start and everything in between. The USA ones are expensive but I have 2 (an sl 1 and sl 2) and given the enjoyment and reliability they have given me, they owe me nothing.
Again, it's a matter of personal preference and style. Many people prefer to learn on acoustic guitars, but the strings are much tougher which causes fatigue to learning fingertips. The strings produce a buzzing effect as they are hard. Harder strings mean that learning fingers will find it hard to play bar chords. On the other hand, electric guitars offer comfort while holding down chords as the width of the neck is shorter than that of an acoustic guitar. The strings on an electric guitar are softer which makes means you can practice longer without your fingers getting sore. The habit of playing with light strings from the beginning can trouble in near future as acoustic guitars are also needed in various music production situations. And don't forget, you'll need to pick up an amp and so on to play your electric guitar.

I purchased this as a replacement for my acoustic guitar of 15 years. I couldn't be more pleased with the purchase. The construction is excellent without gaps or excess glue around joints. The top is solid sitka spruce which is a very attractive feature at any price point let alone $200. The aesthetics on the DG800 are simple and the design on the head stock is painted and will rub off with time. However that has no bearing on the overall fit and finish of this guitar, both of which are excellent for a <$1000 guitar.
Ovation guitars have a history of innovative design, reflecting its founder’s engineering training and development of Kaman helicopters. Ovation guitars have composite synthetic bowls; earlier acoustic guitars have had wooden sides abutting a flat back since the 1700s. Kaman diagnosed structural weaknesses in the orthogonal joining of the sides, and felt that a composite material could be used for a smooth designed body. Ovation’s parabolic bowls dramatically reduced feed-back, allowing greater amplification of acoustic guitars. Improved synthetics used techniques from helicopter engineering to control vibrations in the bowl. Ovation has developed a thin neck, with the feel of an electric-guitar’s neck, but with additional strength from layers of mahogany and maple reinforced by a steel rod in an aluminum channel.[1] The composite materials and thin necks reduced the weight of Ovations.
This acoustic guitar model has been over the time well renowned as the best selling in the UK. This is owed to its high value and sound quality, accompanied by its trendy design and ease of use. It has a shortened scale length that makes it easy to play, even for beginner guitarists. It mostly comes in a warm natural color and is for the right handed guitarists. It is quite affordable, with prices ranging from around INR 8900. You can click below to find more product details on the official link.
You don’t need to be the new Bob Dylan of lyrics to write a song. Writing a song with your own lyrics and vocal melody will help you learn how your guitar fits into songs. Phrasing, space, when to play rhythm, when to think about any solo (see 13), chord changes etc. You don’t have to share it. But do it for yourself. It will help you understand songs much better.
I bought my first guitar several years ago and I’ve been happy with the purchase. But recently I’ve thought about buying a used guitar if I happen to find a good guitar at a bargain at a music store or pawn shop. I like the advice you gave for buying a used guitar: that I should stick with well-known brands and inspect the fret boards, neck, and other parts for needed repair. I’ll keep these tips in mind the next time I visit a guitar shop.

Guitar Center Albuquerque provides comprehensive guitar repair services for the Albuquerque area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Albuquerque can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.
I have a Schecter S-1+ (which I believe is close enough) so I'll try my best to answer. There should be 3 knobs and 1 switch. The toggle switch is the pick-up selector. When it is in the middle the sound is coming from both pick-ups. When you flip it left the sound is coming from the neck pick-up. When you flip it right the sound is coming from the bridge pick-up. Next the 3 knobs. The left knob is the volume for the neck pick-up I believe. The middle knob is the tone. And the right knob is the volume of the bridge pick-up. If you are playing a left handed guitar the switch the directions (Ex. Left would now be right; right would now be left; middle stays the same.) So there ya go. Hope that helped!
Les Paul, the legend, designed this guitar. This guitar has had more widespread popularity than the Strat, IMO. Jimmy Page was a huge fan of the Les Paul and the SG. Gibson made the double neck SG on special request made by Jimmy Page which was featured in the song "Stairway to Heaven" in the concert at Madison Square garden. Jeff Beck and Pete Townshend are among other notable people who use the Gibson Les Paul.
Where do you people get off not even mentioning BC Rich. They have a fine selection of Guitars, they use some of the best woods you can ask for, very good electronics, and Kerry King of Slayer fame will only play BC Rich, that in itself should be enough said. On top of that the body styles that they have to choose from is far more innovative and original than anything that Ibanez could ever dream of producing. Fender and Gibson are in fact the most well known guitars in the world but frankly the body styles are outdated and worn. They believe in staying with what works but wheres the originality? Im sorry if I offend but BC Rich til death. I have never seen anyone come up with anything as wild and as evil looking as the worlock models. I mean the nickname for a guitar is an axe but so far only BC Rich guitwrs look like somthing you can take into battle, and the sound is like the very voice of Satan himself. And shame on you all to forget about Dean Guitars, They were used and endorsed by the God of Metal shreddiing himself Dimebag Darrell Abbott. The man died on stage with one in his hands. RIP Brotger and Goddspeed. give repect where respect is due.

After the retirement of Kuhrmeyer in 1955, the company was taken over by Sidney M. Katz. The product line of Kay was shifted toward electric musical instruments on demands, and in 1964, the company moved to a new factory in Elk Grove Village, Illinois. In 1965 Katz sold Kay to Seeburg Corporation, and he became the head of Seeburg's musical instrument division. In 1967, Kay was resold and merged with Valco, but dissolved in 1968 due to financial problems.[9]
For strumming, I've recently been using Virtual Guitarist Iron. They have a lot of similar strum types in each preset, but different enough that you can switch between them and it almost sounds like a real guitarist if you time it right and it is easy to use. They do a power chord type of strum. I also find if you run them through something like Guitar Rig, they sound a lot better also.
A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:
Feedback is essentially the presence of a sound loop where the guitar’s amplified sound causes increased vibration in the strings. The sound of this vibration then gets further amplified, continuing the loop and resulting in distorted sound. Usually the source of the feedback is the guitar’s amp, but in cases of hollow-body guitars, the amp’s output resonates in the actual guitar body. For many music styles feedback is an undesirable trait, but it’s also been used as an awesome effect by prominent guitarists such as Jimi Hendrix and Kurt Cobain.
The electric guitar was at the heart of popular music for the new generation. Fender released the Telecaster – the first mass produced solid body electric which made it possible for the average Joe to buy a guitar and start a band to express themselves.  With amplifiers and solid body electrics the volume could be cranked and every bit of emotion displayed through the music.
Here we have a cool vintage piece. Made in USA and is highly Possible this is a Gibson Archtop. Great Original condition make this a great find...this one is a Solid 8.5/10 condition. This one still has the original tuners and pick guard too. The neck is straight and the frets are still OK...and wow what a supprise this one plays great!..nice vintage tone...no repairs or damages just natural play wear and dings etc associated with a true vintage player....EZ on the eyes see the great detailed bindings! and wow this baby sounds very nice...great for Jazz .

Probably one of the greatest is Glenn Schwartz, formerly of the James Gang and Pacific Gas & Electric. Considered to be a "white" Jimi Hendrix, he was asked by Jimi to play at what was to be his last birthday party. Glenn played behind his back and with his teeth (now with his gums) before Jimi ever did. Now out of the limelight (and out of his mind) Glenn plays (and preaches) on Thursdays at a blue collar bar in Cleveland. ONE F*CKING INCREDIBLE PLAYER. Should be on any list.
The theory of evolution says that the longer something has been evolving the more complex it tends to get, and this is certainly true of the electric guitar, which has been evolving for over half a century. Electric guitar sounds rely on the instrument itself, the amplifier through which it is played and also on the loudspeaker system used. Further variables are introduced when miking techniques are taken into consideration, though these days miking is only one of the ways of recording an electric guitar — we also have a number of effective DI techniques from which to choose.
While the acoustic-electric guitar isn’t actually its own body type, it’s simply an acoustic guitar with electric pickups to amplify its signal (we’ll talk about pickups soon!), it’s worth mentioning that you’re almost never going to get a comparable tone to that of a hollow body or really, any kind of electric guitar. It’s just not built for that, and in fact, it’s almost always better if you want that acoustic sound, to buy a really resonant acoustic guitar and add a nice soundhole pickup (like this one) instead.
In May 1965 Keith Richards used a Gibson Maestro FZ-1 Fuzz-Tone to record "(I Can't Get No) Satisfaction".[24] The song's success greatly boosted sales of the device, and all available stock sold out by the end of 1965.[25] Other early fuzzboxes include the Mosrite FuzzRITE and Arbiter Group Fuzz Face used by Jimi Hendrix,[26] the Electro-Harmonix Big Muff Pi used by Hendrix and Carlos Santana,[27] and the Vox Tone Bender used by Paul McCartney to play fuzz bass on "Think for Yourself" and other Beatles recordings.[28]
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.[14] Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.

The Police were a new kind of power trio, and Andy Summers was the main reason. Quickly moving away from punk, he recast jazz chords and reggae rhythms as headlong rock & roll. Summers played as sparely as possible, constructing clipped twitches or dubby washes of sound – leaving ample room for Sting and Stewart Copeland. "His tone and style were just absolutely perfect – he left space around everything," Rush's Alex Lifeson said. "And he can handle anything from beautiful acoustic playing to jazz to hybrid kinds of stuff."

Most of the time, you’ll almost always see a piezo pickup on an acoustic electric guitar with the addition of an on-board preamp. Typically, it will be installed underneath and in contact with the saddle on the bridge of the guitar where it can effectively pick up vibration energy. This specific type of device is called an active undersaddle transducer. This type of pickup is often paired with other pickups and microphones to provide versatility for sound options, and to produce a richer, more organic and natural sound. A piezo pickup and other types of electronic pickups are what we call active pickups.

But add some effects to the blend and the results can be even more interesting. Keyboard-like tones can be generated by rolling off the tone pots and employing digital delay, expanding the sound of your band without overstuffing the van, and the gentle application of a phase shifter or wah-wah can bring an interesting voice to warm, low tones. Jimi Hendrix’s “Pali Gap” is a classic example of the latter.
A favored brand of a number of against-the-grain musicians – like Jack White of The White Stripes, Dan Auerbach of The Black Keys, and the late great David Bowie – Eastwood is unique in that, alongside their catalog of more traditional guitars, they’ve also taken it upon themselves to bring back a number of more obscure models through the revived Airline brand. For instance, the ’59 Custom 2P pictured above was originally offered by VALCO in a catalog sale through Montgomery Ward from 1958 to 1968. Their vintage style instruments are updated with modern manufacturing techniques, giving players the opportunity to pick up rare offerings at a reasonable cost. But perhaps the coolest thing about this company is their custom shop. Set up almost like a Kickstarter, the shop allows customers to bid on defunct, new, and bizarre guitars and go on to build whichever models meet their funding requirements.

The Loar guitars are crafted after the classic guitars of the 1920’s and 30’s. Cited by many owners as a great singer songwriter guitar, the LH 200 is a small body folk style acoustic. It does not have the volume of a dreadnought style body, but this guitar is described as having a warmer tone. It has a solid spruce top with mahogany back and sides. So if you fancy yourself a singer songwriter, this may be a great choice for you. It's the best small body acoustic guitar under $500, in my opinion.

This question is one of those legendary analog vs. digital type debates. Many a forum war has been started around this topic. It’s typically a question asked by beginner and intermediate guitarists looking to get into effects. Given a budget, is it better to start a collection and buy a couple of individual effects, or get a single multi-fx unit? There’s not really one correct answer to this question one way or the other, since it largely matters on what your goals are.

We would recommend that you, for your first guitar, spend between $500-$1000. This price range is good, because you know that you will be getting a guitar that is made for some serious music making (which the cheapest ones out there just aren’t). Of course you don’t want to spend this much money on something you’re not even sure you will be using a year from now, so if you aren’t that serious about learning to play the guitar it might be a good idea to go for an even cheaper option.

At the beginning of the 1920s, Andrés Segovia popularized the guitar with tours and early phonograph recordings. Segovia collaborated with the composers Federico Moreno Torroba and Joaquin Turina with the aim of extending the guitar repertoire with new music.[14] Segovia's tour of South America revitalized public interest in the guitar and helped the guitar music of Manuel Ponce and Heitor Villa-Lobos reach a wider audience.[15] The composers Alexandre Tansman and Mario Castelnuovo-Tedesco were commissioned by Segovia to write new pieces for the guitar.[16] Luiz Bonfá popularized Brazilian musical styles such as the newly created Bossa Nova, which was well received by audiences in the USA.
There are a couple of important things to look out for when buying an acoustic guitar for the first time, one of which being plastic hardware – especially if it’s used on the bridge or the tuning pegs. Unless you are paying less than a hundred dollars for the instrument, there’s no reason why a good beginner guitar should have a plastic bridge or saddles, which aren’t particularly durable and do nothing for the instrument’s tone or sustain.
The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.

Tube amp distortion is created when tubes are overdriven by receiving more juice than they can handle, thus causing the signal break up. Tube-driven amplifiers are still in demand by seasoned players because of the warm, musical tones they create, and some distortion-type effects use actual tubes to replicate that sound. But most distortion effects are produced either through analog solid-state circuitry or digitally.
This depends on personal preference; changing the order of drive pedals changes how they sound when used together. For instance, a clean boost placed before a heavy distortion or fuzz will result in a louder boosted signal hitting the heavier distortion circuit which in turn works that circuit harder and you get heavier distortion. If you place that clean boost after the heavy distortion, it will just make the original distorted sound louder. Experiment with different placement order and you will find your own preference.
The explanation for this "asymmetrical" tuning (in the sense that the maj 3rd is not between the two middle strings as say in the tuning of the viola da gamba) is probably that the guitar originated as a 4-string instrument (actually an instrument with 4 double courses of strings, see above) with a maj 3rd between the 2nd and 3rd strings and that it only became a 6-string instrument by gradual addition of a 5th string and then a 6th string tuned a 4th apart:
2.  Cracked peg head.  Customer “fixed” with mystery glue and a wood screw.  Result:  Peg head and neck shaft not aligned. Fix: If the peg head can be re-broken you may be able to re-align the neck and re-glue (if it was glued with aliphatic glue you won’t be able to as the glue will not stick to itself).  The joint may have to be resurfaced and new wood may have to be inserted, possibly a spline as well.
Description: Body: Maple - Body Construction: Solid - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Natural
Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.
It features a solid mahogany top with laminated sapele back and sides, leading to a warm tone that’s a joy to listen too. Despite the small body size, the BT2 has a robust projection, thanks to the arched back. The neck is joined to the body via screws, which tarnish the look a little, but leave no impact on the slick playability or the tone, so aren’t a big deal.
Sound images are very similar to visual images. If you're in a large auditorium, but standing on stage right next to an actor's face, you will see every nuance of his face, pimples, pores and all. You will not see his whole body though, and you won't see him in the context of the rest of the stage or the room. If you move back to the tenth row, you will lose some of the facial detail, but you will gain perspective. If you move to the rear of the auditorium you'll lose all the detail of the actor's face, but you see the whole enchilada in perspective.

Another factor to consider are the alloys used to make the string. Acoustic strings may be phosphor bronze or an 80/20 bronze/zinc alloy, electric strings may be pure steel or a steel/nickel alloy, and the outer winding on the thicker strings may be either round wound or flat wound, which is typically used by jazz guitarists for smooth fingering with less fretting noise. Acoustic and electric strings are both now available with special super-thin coatings to protect them from sweat and corrosion. Coated strings cost more, but generally last much longer. Find out what type of string your favorite player uses, try guitars with different types of strings at your local guitar store, then try a few different sets on your guitar to see what feels and sounds best for your playing style. Major manufacturers include Ernie Ball, Martin, GHS, D'Addario, and Elixir, among others. Make sure you have a string winder to make installing the strings go faster, and some pliers with a fine wire cutter to clip the excess string from the tuning post, a well as some guitar polish - changing strings is a good time to perform some routine maintenance. Keep a clean cloth in your case to wipe down the strings after each use, along with extra bridge pins for your acoustic guitar. Regular string changes are the best way to keep your tone crisp and clear, so grab a pack and tune 'em up!
One problem with adding a tweeter to a bass speaker cabinet is that the tweeter may be damaged by the overdriven amplifier tone that is popular in some musical genres, since overdriving the amplifier adds a great deal of high frequency information to the signal. Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets produced by manufacturers such as Gallien-Krueger and Carvin and other manufacturers allow bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn, which prevents this problem. Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
I have a Palmer P 33 acoustic (hand-crafted etc), that I bought second hand about 20 years ago for £80. It still sounds and looks superb and rarely loses its tuning. (Probably better than my newer Tanglewood.) I can't find out anything about it. However, somebody out there must have made it. Surely that somebody knows something about them! Do they never go on the internet! Pete.
Although I’ve spent most of my life focusing on audio journalism, I’ve been active as a musician since taking up guitar seriously in the 1970s, and I have played lots of gigs with jazz, rock, and folk groups in New York and Los Angeles. I now play mostly double bass and ukulele; I currently play in three jazz groups in Los Angeles, and I sub regularly in a couple more groups. I also conduct more-or-less weekly jazz jam sessions at my home, where I accompany numerous guitarists of widely varying skill levels, toting all sorts of axes. Having conducted innumerable multi-listener comparisons of audio products over some 25 years, I have a good idea of how to make product tests fair.
While the Line 6 PODHD500X is no longer the flagship guitar processor, it is still very much in demand in the market, as evidenced by the overwhelmingly positive response that it continues to get from users and expert alike. It follows after its predecessor, albeit with a more powerful CPU and improved interface via colorful LED rings around the footswitches.
Regarding truss rods, all vintage Martin instruments post-1934 have *non-adustable* truss rods (T rod). This means the neck better be straight, otherwise an expensive repair will be in order. To check neck straightness on a guitar, first tune the guitar to pitch. Then hold the low-E string down at the 1st and 14th frets. Note the distance between the bottom of the low-E string, and the 7th fret. You should be able to put a medium guitar pick in this space. Any more, and the neck is "bowed". Any less, and the neck is "back bowed". Repeat this with the high-E string (the same results should be seen; if not, the neck has a "twist" to it).
The F-55 was identical to the F-50 except for the addition of a bridge DeArmond humbucker, plus the attendant three-way toggle on the cutaway horn and a second set of volume and tone knobs flanking the treble f-hole. The F-55, too, had a Martin “M” trapeze tail. This series began with guitar #279831. Some 1,700 F-55s were made from mid-’62 to the summer of 1965.
Was skeptical at first since I own a couple of vintage Martins. Aside from the LX1E being a sustainable responsibly built guitar that has HPL back/sides, hybrid neck/fingerboard, and whose soundhole smells like a Lincoln Log toy set this is an amazing find. Yup- it’s perfect for the overhead bin on airplanes, comes with a good gig bag, and sounds great plugged in. Experimented with .11 gauge string set, but this guitar is really made for either .12 gauge or a true .13 (medium gauge) strings set. This guitar is designed for the combination of heavier strings and assertive strumming or picking to create a sound that belies its small size. It welcomes being pushed, muted, and/or percussively played. Found the same to be true of Martin’s DX regular size guitars which sound amazing for what they are. While the E Sheeran LX model has his logos on it, this
When discussing the science of tone, it’s safe to assume that we all know how electric guitars work. Pickups are electro-magnets that sense string vibrations and produce a signal that ultimately blares out of the amplifier. Of course, we all know that myriad other factors influence the sound, as well. Body shape, wood choice, string selection, pedal effects, rack effects, humidity, amount of people in the room, and the guitar player’s recent fight with his girlfriend are just some of the items that can alter a guitar tone from performance to performance.

A continuation of the 7-string, adding another string a perfect fourth lower than the seven strings low B. The eight string guitars additional low F♯ string is just a whole step up from a bass guitars low E string. While luthiers have been building these instruments previously, mass-produced Eight-string electric guitars are a relatively recent innovation. Ibanez was first to offer a production eight-string guitar in March 2007.[46] Many other companies now produce mass-market eight-string models, yet these guitars remain relatively uncommon.

This guitar has a mahogany neck topped by a 20-fret rosewood fingerboard. It has a scale length of 25.62", while the nut width is 1.69". Since the AW54 is from Ibanez, you can expect the neck profile, string action and overall playability to be comfortable and beginner friendly. Wrapping up this affordable guitar's premium-like specs is its Open Pore Natural finish, which gives the instrument an earthy appeal that's easy on the eyes.
At the other end of the size extreme sits a shape called the parlour. Parlour acoustics are among the smallest in body size you can buy – not counting the modern ‘baby’ guitars – and are typically favoured by players of more low-key, less brash musical styles like folk and indie. Once again, the guitar’s distinctive shrunken body shape is another invention from the CF Martin guitar house, with the guitar’s neck typically joining the body around the 12th fret.
Even if he had never progressed beyond the brain-rattling riffing of "2112" and "Xanadu," Rush's guitarist would have left his mark on Metallica and other like-minded metalheads. But he went on to fill out Rush's power-trio sound with a seamless mix of lush arpeggios and rock crunch that sounded like at least two players at once. "The guitar just had to make a broader statement," he says. Alex Lifeson reserves his most daring playing for his solos – just try wrapping your head around the extra­terrestrial lunacy of "Freewill."
If you're looking for one of the best Strats Fender has to offer, be sure to check out the Fender American Professional Stratocaster. Developed with pickup master Tim Shaw, its brand-new V-Mod single-coil pickups are voiced specifically for each position, mixing alnico magnet types to produce powerful, nuanced tones with original Fender sonic DNA. For metal guitarists, have a look at the Jackson JS32 DKA electric guitar. Swift, mean, and easy to play, this guitar offers classic Jackson tone and playability at a more than affordable price. If you're looking for a Les Paul guitar, a great choice is the Epiphone Les Paul Custom PRO electric guitar. If you're ready to step up to a Gibson Les Paul, the 2019 Gibson electric guitar lineup is in-stock.