Adding to their already good value, most multi-effects come with built-in features that are essential to gigging and practicing, first of which is a built-in tuner. Looping is also a good feature to look for, thankfully it now comes standard for most units. Having the ability to record straight to a computer is another handy features that should be considered, as well as the ability to edit the settings via your computer or mobile device. Built-in metronome/rhythm is also a nice plus, especially for those who want to take their skill to the next level.
The Rocker 32’s secret weapon is its stereo capabilities courtesy of two output stages and a mono out/stereo in valve-buffered effects loop – and it’s this that opens the door to some tantalising effects possibilities. It also features a half-power option incorporated into the front panel standby switch. The enamel control panel follows Orange’s classic 1970s ‘graphics only’ format, using pictograms to describe the control functions. The Dirty channel includes gain, bass, mid, treble and master volume controls, while the clean Natural channel has a single volume control. The Natural channel may only have a single volume control, but it’s perfectly dialled in to flatter practically any guitar and it sounds wonderful, with a glassy treble giving way to an addictive chime at higher volume levels. The Dirty channel’s gain control has a very wide range, allowing fine control of moderately driven sounds, with plenty of Dark Terror-approved filth at the top of its travel, making it ideal for everything from classic Brit rock and blues to modern metal. The Rocker 32’s stereo capability will make it almost irresistible to effects users. Plugging in a decent stereo chorus and setting the outputs to dry/wet sends a clean uneffected sound through one side and a fully wet modulated sound to the other. This wet/dry combination generates the chorus effect in the air between the loudspeaker and the ears, creating a real three-dimensional soundscape that swirls and breathes like a classic Leslie rotary loudspeaker.
You will come across many people who'll give you different opinions regarding different brands, and also, there are several other reviews on the Internet too. Keep your research simple, experiment, and keep frequenting guitar shops and secondhand musical instrument stores to check out the different kinds of brands. Play as many guitars of different brands as you can, and one day, you will find your 'guitar-soulmate' (sic.), the sight and sound of which will make you go 'wow!' So, if you're new to the guitar world or have recently developed an interest in it, this Melodyful article will surely sort out your doubts. Here is a brief comparison of different guitar brands along with detailed descriptions of the tone and sound. Take a look!
In 1956 Jennings was shown a prototype guitar amplifier made by Dick Denney, a big band guitarist and workmate from World War II. The company was renamed Jennings Musical Industries, or JMI, and in 1958 the 15-watt Vox AC15 amplifier was launched. It was popularised by The Shadows and other British rock 'n' roll musicians and became a commercial success.
It’s the knob that controls a potentiometer (informally a “pot”) which acts as an inhibitor of sorts (when used in conjunction with a capacitor), bleeding off the high end frequencies of a guitar’s pickup (or pickups) signal that has passed through the volume control and is on it’s way out of the guitar, giving it a “warmth” (think muffled-ish) sound.
The GE-7 Graphic Equalizer is good to have after the overdrive in case you want to use it to scoop mids or bump certain frequencies for solos. (To show that these are not hard rules, it also works pretty well if the EQ is after the compressor but before the overdrive. But this changes how the EQ sounds, since you would be distorting it with the overdrive, so try it in the suggested position first.) Also, it’s good to have the EQ before the noise suppressor, since EQs can add noise as they boost tone at various points in the frequency spectrum, including any noise that is already there.
GREAT PICK YOU DEFINITELY WONT BE DISAPPOINTED!! If you are going to want brighter more crisp tone in the mids and treble go with extra light string, for warmth light strings. Always keep in mind the following WELL known facts: strings DO MAKE A BIG DIFFERENCE ON ANY ACOUSTIC GUITAR. USE LIGHTER GAUGE STRINGS. for more of a sleepy tone like gravedigger by Dave Matthews use medium gauge. typically you want a SOLID WOOD guitar! They just give you that full bright sound all players want in a good guitar. Indian rosewood back and sides with solid usually solid Sitka spruce top rosewood is the fret board preference the 214 series and up are the best for the price. I know you will absolutely LOVE the Taylor. I am a huge fan of the grand auditorium series on all acoustics they are much lighter and more comfortable to play. They also are the most versatile among many different genres. Unlike martins although with the right model woods and strings they still don't stack up to a Taylor
An avid skateboarder and hot-rod enthusiast, Ness epitomizes working-class Southern Californian culture. Springsteen comparisons are always dangerous, but the Boss did appear on Ness’ 1999 solo disc Cheating at Solitaire. Springsteen also named Social Distortion’s Heaven and Hell as his favorite record of 1992. Brian Setzer is another kindred spirit and musical collaborator. Ness is one skate punk kid who has stood the test of time.
Here we have a cool vintage piece. Made in USA and is highly Possible this is a Gibson Archtop. Great Original condition make this a great find...this one is a Solid 8.5/10 condition. This one still has the original tuners and pick guard too. The neck is straight and the frets are still OK...and wow what a supprise this one plays great!..nice vintage tone...no repairs or damages just natural play wear and dings etc associated with a true vintage player....EZ on the eyes see the great detailed bindings! and wow this baby sounds very nice...great for Jazz .
Because of the miniaturization of all things electronic, you can now get full-sounding, authentic guitar sounds from a unit the size of a disposable camera — as long as you listen to it through headphones (meaning that it has no speaker or power amp of its own). These battery-powered wonders come with belt clips for untethered practicing (great for checking your stage moves in the mirror).
All of the guitars on this list except for the Blueridge BR-160 are equipped with an electronics system that make them stage- and studio-ready. You can simply plug and play when you need to perform in front of an audience in a crowded or big venue where there’s a lot of ambient noise. If you don’t need amplification – for example if you’re just practicing at home – these guitars sound great unplugged as well.
Nickel ES-335 diamond trapeze tailpiece. This is a short version of the standard ES-335 style tailpiece which was also used on many arched top instruments. Overall length of Tailpiece not including hinge = 3 1/8 inches. Side to Side width at bar = 3 9/32 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
I know a lot of you out there fancy yourself as “tinkerers”, and many of you may actually be quite good at handling repair work to your own instruments, but I’ve always been more of the kind who loves to find a good repair person. Number one, if the repairer doesn’t do the right job, or there are problems with the work they did, they have to own up to it, and make sure it’s done right until you are fully satisfied. Then of course, if they are actually a selected and accredited repair person for a given guitar company, it’s even better to bring them the guitar, rather than trying to take matters into your own hands.
Finally we have the good old Jackson JS22 Dinky. This is more or less Jackson’s default entry level model. As such, it brings the type of performance every beginner wants. Especially if they plan on playing metal. The pickups on this thing don’t have a whole lot of range, but I’ve managed to squeezer a light fuzz out of them. There wasn’t much range, but the consistency of tone was more than satisfactory.
Rack-mount gear has become somewhat of a lost art for guitar players since the late 90’s. Nonetheless, rack gear is great for people who want programmability of preset tones, the ability to interchange components, and those who love seeing bright lights flicker as all of your gear goes to work! So for the rack-gear heads that still exist on this earth, we’ve compiled what we think are the 10 best rackmount pre-amplifiers of all time.
You've Changed. Yep, you still LOVE your guitar, but man, you are now playing through a sweeet pedal board and amp that has way more gain than you could ever use. The days of plugging straight into a Twin Reverb and trying to bully her into distortion is (thankfully) long gone. Plus, you're older and wiser now, you no longer judge a pickup's value simply in it's output level ... you have now acquired a taste for true tone. You want rich complex harmonics and touch sensitivity. Face it, those EMG's did what needed to be done in 1991, but it's time to move on!
A lot of people begin with a nylon string acoustic, often called a classical guitar. They’re reasonably priced at beginners level (don’t go too cheap), the design has a wide fret board to accommodate your inexperienced fingers and the nylon strings are easier on your aching fingertips. You have to agree, they can sound kind of dull unless that dream of yours is of becoming a famous, classical guitarist like John Williams — certainly not a bad thing. So nylon string acoustics are great to learn with, but there’s a risk you’ll want something more pretty quickly.
The use of two or more mics is likely to result in other phase issues when these mics are combined in the mix, since they will almost certainly be capturing sound waves that reach the mic capsules at slightly different times. Whether such issues are bad enough to cause a problem (or even be heard) depends on the situation. First, if your two mics sound odd and hollow and/or lacking in low-end from the outset, flip the phase of one (usually via a switch on the preamp or afterward in your DAW) to ensure you aren’t trying to blend two mics that are reverse-phase in the first place. If your two-mic sound goes from hollow and thin sounding to fat and full, you had a reverse-phase issue. If it doesn’t improve – or gets worse – you need to consider other remedies. Once you know that both mics are at least in phase with each other, you can improve their phase relationship even further by moving the position of one around until any other sonic oddities are less obtrusive, which is simply determined by finding a pair of positions that are really smoking tone-wise.
If you want to get this game, you have a few options. The game is $60 with no guitar cable included; this is the best bet for owners of the original "Rocksmith," as the cable that came with that game works here, too. If you don't have the cable, but have a guitar, the game costs $80. If you need a guitar, too, that'll run you $200 for an Epiphone Les Paul Electric Jr. guitar, plus the game and cable.
Another unusual bass amp is Ashdown's B-Social combo amp, which the company calls a "desktop amp". The 75 watt combo amp has two 5" speakers, which provide stereo sound. While some keyboard amplifiers and electric guitar amplifiers provide stereo sound through two speakers, this is a rare feature on a bass amp. The B-Social provides Micro USB and Bluetooth 4.0 connections for hooking it up to a desktop computer. The amp is versatile enough to be used for playing bass, playing recorded music or streaming music as a home entertainment centre, or for amplifying video game sound effects. The amp has a special socket for connecting amp and cabinet simulation and effects unit apps which can be downloaded on iPhones and iPads. The amp was called "B-Social" because it has a second input, so that a bassist can jam with another performer. The B-Social's USB audio interface can be connected to Digital Audio Workstations for sound recording.
Needing a more compact logo suitable for the guitars’ headstock, the founders decided to change the name to “Taylor” as it sounded more American than “Listug” and because as Kurt Listug put it, “Bob was the real guitar-maker.”Listug became the businessman of the partnership while Taylor was responsible on design and production. In 1976, the company decided to begin selling their guitars through retailers. In 1981, facing financial difficulties, Taylor Guitars took out a bank loan to purchase equipment.
This mod revolves around the concept that adding mass to the headstock lowers its resonant frequency, while reducing mass will raise that frequency. The theory at work here is that vibration is absorbed or reflected back into the strings and body based upon this frequency. Depending upon the harmonic makeup of your particular instrument, changing this can enhance or degrade sustain and accentuate or attenuate certain harmonics. All of this is dependent not only on your guitar’s construction, but also on how large your headstock is to begin with. If all of this seems a bit hazy, that’s because it is. I don’t have a handy-dandy answer like “more mass equals more sustain” because it isn’t always true. Suffice it to say that you can make a difference in a guitar’s character by following this path. I usually go through this exercise with my builds because I have the luxury of time and the resources at hand. It’s like fine tuning a race car’s suspension settings to your liking.
The Ampeg Bassamp Company, founded in 1949 by Everett Hull, responded to the growing demand for electric bass equipment by producing a line of bass amplifiers. Ampeg bass amps were widely used by electric bass guitarists in the 1950s and 1960s. The first bass amplifier offered by Ampeg was an 18-watt model with a single 12" speaker and a rear ventilation port called the Super 800. In 1951, they introduced a 20-watt version with a 15-inch speaker. In 1960, they introduced the B-15 Portaflex, a flip-top 25-watt tube bass amplifier with a single 15" speaker. While the Ampeg Portaflex had a pleasing bass tone, and was used by studio bassists such as James Jamerson and Carol Kaye, it was not powerful enough to be used in a stadium or arena concert.
The process of building our kit guitars and basses is straight forward and requires little experience in woodworking or in instrument building. The entire instrument can be assembled with a few simple tools. Setting the instrument up for your playing style is also straightforward. We will guide you though the basic process in our instruction manual. For more complex or particular setup requirements, we suggest that you work with a professional for setup - just as you would with any instrument that you purchase.
That said, however, the volume knob can help you conjure a variety of tonal characteristics that can come in handy provided you play with dynamics. Using a volume knob in this context can allow such cool maneuvers as having different tones for verses and choruses, or for various styles of music. To get a handle on how your guitar’s volume dial or dials can affect tone, plug in and fire up your amp until it’s growling with overdrive. Start with your guitar’s volume pot at 10 and begin rolling the dial back in increments. As you go, you’ll hear not only a decrease in loudness, but your sound will clean up and experience variations in its harmonic characteristics.
Since 1971 Hoffman Guitars has provided a full range of services to guitar players nationwide. We have always worked to provide the finest in instrument repair services and handcrafted guitars. We provide a full range of repair services, including factory authorized warranty service for C.F. Martin, Gibson, Guild, Fender, Taylor, Jim Olson and others. I (Charlie Hoffman) have built over 600 individually handcrafted guitars, which are (or have been) played by such players as Leo Kottke, Tim Sparks, Dakota Dave Hull, Ann Reed, Jerry Rau, Charlie Maguire and others. In addition, we carry a fairly complete range of accessories for guitar players (strings, picks, capos, pickups, cases, etc, etc.). In this day and age it may seem a bit anachronistic but we really believe in customer service and strive to provide the very best.
Engineers invented the first loud, powerful amplifier and speaker systems for public address systems and movie theaters. These large PA systems and movie theatre sound systems were very large and very expensive, and so they could not be used by most touring musicians. After 1927, smaller, portable AC mains-powered PA systems that could be plugged into a regular wall socket "quickly became popular with musicians"; indeed, "...Leon McAuliffe (with Bob Wills) still used a carbon mic and a portable PA as late as 1935." During the late 1920s to mid-1930s, small portable PA systems and guitar combo amplifiers were fairly similar. These early amps had a "single volume control and one or two input jacks, field coil speakers" and thin wooden cabinets; remarkably, these early amps did not have tone controls or even an on-off switch.
The early rock bands of the 1960s used the PA system only for vocals. The electric guitarist and electric bassist had to produce their sound for the hall, club or other venue with their own amplifiers and speaker cabinets. As a result, bass players from the 1960s often used large, powerful amplifiers and large speaker cabinets. Some bass players would even use multiple bass amplifiers, with the signal from one bass amp being sent to one or more "slave" amps. In the mid-1960s John Entwistle, the bassist for The Who, was one of the first major players to make use of Marshall stacks. At a time when most bands used 50 to 100-watt amplifiers with single cabinets, Entwistle used twin stacks with new experimental prototype 200-watt amplifiers. This, in turn, also had a strong influence on the band's contemporaries at the time, with Jack Bruce of Cream and Noel Redding of the Jimi Hendrix Experience both following suit.
I have owned a lot of amps over the years. I am also a dealer in music accessories. Please note that we do not sell these amps, so I am not endorsing and using something my shop sells. I recently have bought a couple of amps in a series (I bought one first and then bought another) and have been really impressed. The Vox AV series. http://www.voxamps.com/AVSeries
At Sam Ash, we maintain close relationships with the most prominent electric guitar brands to make sure that we always have the very best, latest selection of electric guitars in our inventory. We carry acclaimed electric guitar brands including Fender, Gibson, Paul Reed Smith, Ibanez, ESP, Gretsch, Dean, Epiphone, Yamaha, Schecter, and so much more! If you’re a discerning player or guitar aficionado looking to add a new guitar to your collection, be sure to check out all the fine, premium electric guitars featured in our exclusive Electric Guitars of Distinction collection.