Slash is a longtime fan of legend Seymour Duncan's hand-wound pickups, and for his new Epiphone Firebird, Slash choose custom Seymour Duncan "Slash" open coil-humbuckers for the rhythm (APH-1) and the lead positions (APH-2). These were Slash's first custom pickups made with Seymour Duncan and feature Alnico II magnets and are slightly overwound for a boosted output. Each pickup has a single conductor cable, a long-legged bottom plate, and a wooden spacer. Controls include individual Volume and Tone pots with traditional Black Top Hat knobs with metal inserts and pointers along with a Switchcraft 3-way Toggle switch. Tone controls for both pickups also feature Sprague "Orange Drop" capacitors (0.022uF, 600V, 5%), the same capacitors Slash uses on his custom designed Les Pauls.
In addition to building world-class custom basses and guitars, our luthiers also perform a wide variety of guitar repairs, restorations, modifications and upgrades. Whether you have an electric guitar, acoustic guitar or a bass, new or old, feel free to bring it by the shop for a free assessment. We have the experience, skill and equipment to provide maximum playability.
From what I've been able to find out (as a proud owner of a mint W-415 'Dove' model acoustic), Lyle guitars are actually Gibson seconds, that for whatever reason didn't pass muster to be sold as a Gibson (bad finish, scuff, imperfection in the wood, etc.). The Lyle company was out of Portland, OR (I believe) and was started by former Gibson employees who would fix the flawed Gibsons and resell them under the Lyle name. Made in Japan was because Gibsons were made in Japan at the time(?). A damn fine instrument; considered rare now, I guess. I don't ever want to get rid of mine!
This legendary thinline electric guitar has been in continuous production since 1958 and has been updated for 2019. The new Gibson ES-335 Figured has the classic semi-hollow body construction with a chambered maple center block with a three-ply AAA-grade figured maple/poplar/maple top and back. Its bracing is made of quarter-sawn Adirondack spruce. The center block and bracing are both thermally engineered.
The Teisco brand name stands for 'Tokyo Electric Instrument and Sound Company'. Teisco was founded in 1946 by renowned Hawaiian and Spanish guitarist Atswo Kaneko, and electrical engineer Doryu Matsuda. Teisco guitars sold in the United States were badged "Teisco Del Rey" beginning in 1964. Teisco guitars were also imported in the U.S. under several brand names including Silvertone, Jedson, Kent, Kingston, Kimberly, Tulio, Heit Deluxe and World Teisco. While guitars manufactured by Teisco were ubiquitous in their day, they are now very collectable.

Terry Kath and Stevie Ray Vaughan for me over anyone on that list but Jimi. I’ve seen Page, Clapton, Billy Gibbons, Brian May, David Gilmour, Steve Howe, Eddie Van Halen, Buddy Guy, Keith Richards, Pete Townshend, Mick Ronson, Kerry Livgren, Joe Walsh, Don Felder and Carlos Santana among others. Totally subjective as is all art and I have weird taste.
ACT TRMOLO REPLACING THE STRINGS ACT tremolo allow two styles of string installation. 1) The strings are installed by putting the ball end into the string slot and hooking the ball end below the string catch at the rear of the tremolo unit. 2) The strings are installed by putting the ball end into the string slot and hooking the ball end in the string catch at the bottom of the tremolo unit.

New in ’64 were the TG-64 (named for the year) and a matching series of solid basses. The TG-64 was essentially a Fender Jazzmaster shape with a slightly extended bass horn, the new, hooked four-and-two headstock (usually with a metal plate on the front), and best of all, our old friend the “monkey grip” handle in the lower bass bout, handed down from the old T-60. The pickguard was two-part, with one large piece under the strings and a little extension on the lower bout for knobs and jack. These had three single-coil pickups, usually the chunky, metal-covered kind with a black insert and exposed poles, although some have smaller oval metal covers with exposed poles, all controlled by three on/off rocker switches above the strings. A small sliding switch served as a rhythm mute, or lead boost, depending on your point of view.
An extremely wise Liverpudlian once said: "Life is what happens to you while you're busy making other plans." Well, we've been busy with life and now, after a few year's hiatus, it's time to present the first phase of our new collection. For your consideration are some truly unique guitars: Silvertones, Danelectros Harmonys, a Supro 60, an Eko Florentine, and many more. Also, did we mention for all you Shagg's fans, there's a pretty stunning Avalon AV-2T. There's more to come very soon, stay tuned. Welcome to!
Echo (also sometimes called long delay) is a natural effect as well, but it is only encountered in large open spaces such as canyons or stadiums. It sounds like when you emit a loud, sharp yelp and a second later you hear the yelp come bouncing faintly back to you from a far wall. This is a particularly fun effect to play around with by yourself. If you set the delay of the echo long enough, you can play against the notes you just played and harmonize with yourself while the rate sets up a kind of beat.
I have played all sorts of guitars, Guild, Gibson, Epi, Lowden, Fender etc etc. Walden for a beginner/intermediate are far beyond anything you can get for the same money. Exceptional sounding and great build quality, and because no-one has heard of them you can pick them up for half the price or any of the "named" brands if you get a good used one. I have had my hands on 3 in recent years, I got them for less than £100 each - one for £50 and it held its own with anything else I had that cost nearly £1k new. I would recommend them absolutely.
The #1 cause of fret wear is the fretting hand pressure exerted by the player.  I have some clients that grip very tightly and wear frets quickly (Rob Fahey), and some that grip very lightly and take forever to exhibit significant wear (Jasan Stepp, Dog Fashion Disco/PolkaDot Cadaver).  Fret material hardness, string hardness and frequency of use all contribute to wear as well, but hand pressure is still the leading cause since frets do not wear themselves out.  Technique is different for every player, unique and personal and habits can be hard to change.  Just like brakes in a car, how hard and how much something is driven directly impacts wear and longevity.  Please see the refrets page for further thoughts on this topic.
Maybe a more modern, streamlined strap is better suited to your personality. No problem: the best-selling El Dorado Durango Suave Leather Strap uses the same top quality material but in a smoother style that's ideal for acoustic or electric rock guitarists. It comes in a variety of colors so you can seamlessly customize to your favorite looks. Comfortable, adjustable and lightweight, this thick edge-stitched leather strap travels easily wherever you go.
The Kay guitar company's origins date back to the 1890's, starting with the Groeschel Mandolin Company of Chicago, Illinois. The company's name was changed to "Stromberg-Voisinet" in 1921, and shortlyafterwards, in 1923, Henry Kay "Hank" Kuhrmeyer (the origin of the name "Kay") joined the company and quickly worked his way up to the top. By 1928, Kuhrmeyer had bought the company and that same year the company started producing electric guitars and amps.

Guitar effects pedals offer a huge range of possibilities for guitar-sound manipulation―there are literally hundreds of pedals from scores of manufacturers. If you or someone you know is not completely satisfied with the clean, unprocessed sound coming from their guitar and they want to experiment with and modify or color that sound, a great way to tweak it is with effects pedals, also called “stompboxes.” An effects pedal, depending upon its configuration, modifies the sound of a guitar through electrical circuitry or digital modeling via computer chips, either giving it subtle color or dramatic shift. All pedals include knobs on the enclosures that allow the player to adjust the intensity, speed, depth, and shape of the effect in increments, from nuanced color to ear-splitting crunch.
This guitar needs love. It is in used condition with the biggest flaw being near the input jack.  This is the super rare RT series that were only produced for a couple of years and it is MIJ. Has tremolo but no arm If you are reading this, then you know what these are about.. I am the second owner of this guitar. Was bought from a guitar shop locally in San Jose, CA. No returns please

The guitar is one of the most beloved musical instruments of all time. Guitarists tend to wear that title with pride, and their instrument becomes an extension of the player’s distinct personality. Because of this, players tend to develop a strict loyalty to the guitar brand of their choosing. Luckily, there are many great options out there today, with niches that cater to virtually all genres and styles. This guide will weigh the pros and cons of the five best guitar brands on the market, to help you make as informed a decision as possible on which brand will best suit your needs.
Why the Ultra Hard Bodies flopped is a mystery, since they certainly fit with the superstrat rage of the times, but they hung around for only a year or so. According to Walter Carter, Ovation briefly contracted for a shipment of solidbodies made by a Japanese manufacturer. No information is available about these, but it doesn’t really matter since only one carton of 100 or so guitars ever came in. If you find an animal that doesn’t fit the descriptions here, take a picture and let us know about it.
By 1947 with the release of ‘Call it Stormy Monday’ – his biggest hit, Walker preferred playing with a smaller band lineup of six members. This size of band bridged the gap between the solo rural blues players like Robert Johnson or Charley Patton and the larger big band ensembles of the 20’s and 30’s. It became popular and adopted by bands that would find success over the next few decades.
If you prefer the Linux platform, then Guitarix is your best free guitar effects solution. It is a free, full featured guitar amp and effects software. Aside from its impressive amp modeling capabilities, Guitarix has 25 equally impressive effects modules. Effects include a noise gate, modulation effects like flanger and phaser and it even has weird stuff like auto-wah. Guitarix's low latency audio engine ensures respectable audio, which is said to give you not more than 10 milli seconds of delay. This is a simple yet effective guitar effects software, unfortunately it is only available for Linux users.
In addition to acoustic and electric guitars, the company now also makes mandolins and ukuleles. Their mandolins are highly regarded, they “more or less rule in the bluegrass market” in the United States.[5] As of May 2012 the company has about 85 employees and manufactures six to seven acoustic guitars, three electric guitars, two mandolins, and two ukuleles per day.[4]
{ "thumbImageID": "4003-Bass-Midnight-Blue/513600000089000", "defaultDisplayName": "Rickenbacker 4003 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Blue", "sku": "sku:site51274034491813", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Midnight-Blue-1274034491813.gc", "skuImageId": "4003-Bass-Midnight-Blue/513600000089000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jetglo", "sku": "sku:site51274034491793", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Jetglo-1274034491793.gc", "skuImageId": "4003-Bass-Jetglo/000000107918146", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mapleglo", "sku": "sku:site51274034491783", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Mapleglo-1274034491783.gc", "skuImageId": "4003-Bass-Mapleglo/000000107918138", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Fireglo", "sku": "sku:site51274034491780", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Fireglo-1274034491780.gc", "skuImageId": "4003-Bass-Fireglo/000000107918062", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar.  I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best.  You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment.  You get treated like a valued customer.  Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars.  They have a great variety of quality instruments.  Plus, they have some really cool, unique guitars.  A place like this is so rare nowadays.
{"product":{"id":"361014","stock":"","price":"155.00","name":"Vintage Hand-Tooled Leather Guitar Strap","download":false,"sku_id":"","checksum":"82996536150","rep_id":"site1prod361014","sku_rep_id":""},"category":"Fretted Instrument Accessories & Parts","pageName":"product_detail","subcategory":"Fretted Instrument Accessories","dept":"Accessories"}
Guitars with better-quality electronics can avoid these traits to an extent, but as you can see when you turn the tone pot all the way to zero, the dynamics of the RLC circuit that the pickup and tone circuit create result in a “hump” in the upper bass/low-midrange frequencies, roughly centered (in this example) around 300 Hz. This happens because the low resistance, coupled with the high “capacitive reactance” of the capacitor and the “inductive reactance” of the pickup’s inductor, creates what’s known as a “band-pass filter”, where a specific frequency range in between very low and very high frequencies has the lowest total impedance and thus becomes the most present in the tone.
First of all build quality. CTS's sturdy casings, brass shafts and contact patch, solid connections are second to none, and importantly are precision made by a company who have been doing so for a long long time. Fitting a well made pot will mean you'll likely only need to do it once in that guitar, that's important I feel! There are however a lot of different variations of CTS pot, and that is why I now only swear by the 450 Series, and 'TVT' Series, both are constructed with the same components, I like consistency here! Which is why you'll only find these models of pot in my harnesses. I've seen some lower quality series' of CTS pots that have been wildly inconsistent, which I'll get to next..
Lou Pallo, a longtime member of Les Paul’s performing trio until the virtuoso’s death in 2009, earned a signature Les Paul model in late 2010. Nicknamed “The Man of a Thousand Inversions,” Pallo played a Les Paul Custom in the Les Paul Trio. However, the Les Paul on which he consulted for its design features a Standard headstock and body but Custom fretboard block inlays including at the first fret. The body wood is natural-coloured mahogany while the top is ebony-painted maple and bound in single-ply binding like the production Standard. The guitar features, unusually, a black-covered P-90 single-coil pickup at the neck—the same pickup that was standard on the Les Paul from 1952 to 1956—and a double-coil Dirty Fingers pickup without a cover but with a black pickup frame at the bridge. The familiar “rhythm/treble” poker chip around the toggle switch is also black, and the guitar features no pickguard. (Interviewed for the guitar’s introduction, Pallo himself said he had actually wanted the guitar to feature a cream-coloured pickguard, cream-coloured Dirty Fingers frame, cream-coloured P-90 cover, and cream-coloured poker chip.) The Lou Pallo model also features a small reproduction of Pallo’s signature in the twelfth-fret inlay. Pallo introduced the guitar at New York’s Iridium club, where the Les Paul Trio played for many years. Pallo explained for a video of the event that he rejected Gibson’s original idea to put Pallo’s signature on the headstock, out of respect to his old friend and partner, suggesting the inlay signature in its place. After introducing the guitar to the gathering, Pallo played the jazz standard “Begin the Beguine” on the instrument.
The humbuckers were smaller than typical, with metal covers and two rows of exposed adjustable polepieces. The pickups and three-way were mounted on a small black/white pickguard, with knobs on the body. Two jacks for mono or stereo output were mounted on the side of the lower bout. The two-octave unbound rosewood fingerboard had dot inlays. Early Preachers had “Preacher” engraved on the lower pickguard and a bridge/tailpiece assembly was similar to that on the Breadwinner/Deacon, with more metal and less plastic. Other versions are seen without the engraving and all-metal bridge/tailpieces, indicating the model evolved. Though no information is currently available on when the transition occurred, based on evidence from later UKs, it happened late, possibly around 1980.

Fender Pro Series Stratocaster and Telecaster Case   New from$119.99In Stockor 4 payments of $30 FREE 2-DAY SHIPPING Epiphone E519 Hardshell Case for 335-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Epiphone Hardshell Case for Les Paul-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Fender Deluxe Molded Case for Stratocaster or Telecaster   New from$149.99In Stockor 4 payments of $37.50 FREE 2-DAY SHIPPING See All Electric Guitar Cases
Electro-Harmonix’s Memory Man was one of the most popular solid-state delays ever, and even with its meager 5 to 320 milliseconds delay time was little short of revolutionary upon its introduction in 1976. At around $150, it was something of a bargain, too, though not dirt-cheap by any means—considering that at that time you could buy a new Stratocaster for just a little over three times that figure. The Memory Man was launched with Reticon SAD1024 chips, but E-H switched to quieter, better sounding and more adaptable Panasonic MN3005 ICs when these became available, and the latter is the chip found in the better-known Stereo Echo/Chorus and Deluxe models.
The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
I suspect this has been done by someone but I can't find any such tests in my quick internet search. Seems to me this is the only way to really settle the debate; the differences may be too small to hear, but regardless if there is differences then the tone is being affected by the instrument. In that case the wood and body design is making the string vibrate differently, which is what the pickup...picks up.
ASIO drivers do a bunch of things. For one, your DAW talks directly to an ASIO driver, no going through the Windows Mixer and actually bypassing a bunch of other Windows stuff you can’t see. The ASIO driver itself is very efficient. And native ASIO drivers allow you to adjust the buffering on that interface. If you’re working a DAW with 64 tracks of audio going to and from hard drive, you may need to add some “buffer’ memory to keep everything working, because computers are way better at doing a fewer big things than lots of little things. But if it’s just your guitar playing live, you can dial down to minimum buffering to make the delay through the PC as small as possible.
I have never had a negative experience here. The staff is genuinely pumped about guitars. Every time I have gone in, I have always been greeted in a friendly manner and I have never felt that I had asked a stupid question. I really appreciate that they are able to take some of the intimidation out of purchasing a new guitar and put no pressure at all to buy. I'm so glad this store exists here in Seattle! Thank you so much guys!
The EB-18 was a bass version with a 33.825″ scale. According to Longworth, early versions had a single DiMarzio “One” pickup and Grover Titan tuners, while later basses had a DiMarzio “G” pickup and Schaller pickups. Expect to find various combinations of those. Longworth also mentions the possibility that some might have Mighty Mite pickups, but this is uncertain. EB-18 production began in ’79 and about 5,226 (about 1,300 a year) were made until the guitar ended in early 1982.
Frank Bowers Interestingly enough, they have completely different approaches to the job. Bo cranks his Gibson Firebird straight through a Peavey 6505 half stack with nothing in line but a tuner, while Frank rocks out on his Gibson Les Paul Customs through a Digitech GSP-2101 preamp, a Mesa/Boogie TriAxis preamp, a TC Electronics G-Major processor, a Mesa/Boogie 2:90 power amp, and a Marshall 4x12 cabinet. During their show, they each take jaw-dropping solos, and they share the spotlight on some of the best-executed twin leads since Thin Lizzy’s “The Boys Are Back in Town.”
BTW, Superstition is not played on synth but clavinet, a stringed keyboard instrument with magnetic pickups that are, in this song, actually used like two guitar single coils. — I quite agree with all your arguments, however I prefer HSS on a strat-like guitar as it doesn't have the too-muddy-neck-humbucker problem. On a Les Paul or Tele, a neck humbucker is much more useful of course. – leftaroundabout Jun 24 '14 at 23:28
To be able to buy a name brand guitar like this at such a great price was a real steal. One of my sons is a beginner learning to play, so it was great for me being able to purchase a guitar like this that would carry him from beginner into an intermediate player in later years. It is a well-made and beautiful guitar, and it produces a wonderful sound that you would expect from a name like Fender. Plus, with my son being left-handed, I thought it would be difficult to find a good affordable left-handed guitar for him. Not only was able to find this high quality one, but the price couldn't be beat.
Chorus is an effect that doubles and detunes your signal. It can add an otherworldly effect to your tone, as well as add emphasis to your playing. Chorus adds shimmer and depth to your signal. While it shines in making clean playing more lush, many players, Zakk Wylde included, use chorus to add a doubling effect to their solos, which really will bring it to the forefront of a song. When used carefully, you can even approximate the sound of a 12-string guitar.

As PA systems improved, horn-loaded "bass bins" and subwoofers were added and were often well-equipped to amplify directly-fed bass guitar and keyboard frequencies. As well, in the 1980s and 1990s, monitor systems were substantially improved, which allowed sound engineers to provide on-stage musicians with a loud, clear, and full-range reproduction of their instruments' sound.
A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.

Electri6ity is HUGE, like over 26 gigs, but it's like having Eddie Van Halen in your plugin bin once you figure out how to use it. The learning curve is steep, but there's no way I would ever be able to play guitar as well as I can program it not to mention afford the thousands of dollars worth of high-end guitars that are sampled. It also includes a very nice effects rack that is optimized for the library (although DI versions are included so you're free to run it through Amplitube or whatever you like).
Get a ruler (or straightedge if you want to be all fancy) that is at least as long as the neck, but not so long that it reaches all the way from the nut to the saddles (and watch it doesn’t lean on the pickups or pickup surrounds either). If you can’t get one between these lengths, and are willing to sacrifice a ruler, get one that’s too long and cut it to length. Alternatively, you can just cut a little out of one edge so that you can still make full use of the other edge of the ruler. Now lay the edge of the ruler along the frets (don’t rest it on top of the nut, saddles, pickups or pickup surrounds).
{"pageName":"[mf] pdp: ibanez artstar as153 semihollow electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";H91419","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] product detail page"}
[SIZE="2"]Guitar Gear: Gibson '61 RI SG, Dean Cadillac Select, Charvel 475 Special, BC Rich NJ Bich, Gibson Faded V, MIM Strat, Warmoth Tele, LP Copy, Yamaha Acoustic, VHT Pittbull Fifty/ST, VOX VT30, Blackheart BH5H, '72 Hiwatt 4123 Cab, Traynor TS-50, POD XT, 16 ohm THD Hotplate, 80's Peavey Rage combo, Boss ME-50, Russian Big Muff, Graphic Fuzz
The first edition of the Telecaster Custom was produced between 1959-1968, and featured a double-bound body. While the guitar was known as the Telecaster Custom, the decal on the headstock read “Custom Telecaster”. Later editions of the Tele Custom were popularized by Rolling Stones‘ guitarist and composer Keith Richards, featuring a Fender Wide Range humbucker in the neck position and a single-coil pickup in the bridge. The market generally refers to the guitar as the “1972 Custom”, indicating the year this model was originally released.

Some modeling processors fit the palm of your hand and you can place them on a tabletop and punch their buttons to select sounds and effects; some are almost two feet long, weigh as much as 10.5 pounds, sit comfortably on the floor and are operated by foot switches or rows of foot switches called pedalboards. Depending upon how sophisticated, complex and pricey your modeling processor is, you can have a huge sonic palette at your fingertips (or underfoot). Many of these units are MIDI compatible as well, allowing you to stream MIDI data to your computer or other recording device, or trigger other MIDI instruments. Just remember that for performance, you will probably be better off with a processor that is operated by foot switches; this allows your hands to remain free for playing your guitar or guitar synth.
PPS: Made from Polyphenlene Sulfide a material commonly used in automobile and computer parts the PPS picks are lightweight but hard enough to ensure picking is strong and precise, so the pick provides accurate attack with a full-bodied tone as it strikes thestring. Silicon rubber based surfacing on each side, makes this pick ideal for fast picking styles. Available in Teardrop and Jazz shapes, and 0.8mm-1.0mm-1.2mm gauges.
Rather than superfluous power, I suspect the copywriter really meant something like superior!! However, then again, maybe they did get it right, because they featured a 6A6 preamp tube that was exceptionally weak and microphonic. These amps also had a chassis built in Chicago, by Chicago Electric, with a cabinet made in Chicago, by Geib. These had performance problems and in 1937, National Dobro went back to using Webster chassis with Geib cabinets.
The Seismic Audio SADIYG-15 JEM Style Electric Guitar Kit gives you the ultimate shredder guitar. Originally designed by Steve Vai, this style is built for speed. Innovative features like a Monkey Grip Handle and Floyd Rose Tremolo complete the unique design. All the parts needed for a finished guitar are included. This guitar kit is suitable for the aspiring or established luthier and all guitar players. A truss rod adjustment hex wrench, two Floyd Rose tremolo adjustment hex wrenches and solder are included. You will need a phillips head screwdriver and a soldering iron to fully assemble the guitar. A pack of six nickel alloy strings and a right-angle guitar cable are also included.With your purchase, you will receive one DIY JEM Style Electric Guitar Kit pictured and described above.
Pickup selectors can wear out over time. The lugs and the rotating switch can loose their tight connect with years of use. Also, many inexpensive guitars made today use cheap electronic parts. You may just want to upgrade your switch for more control and better selections. It is fairly easy to install a new pickup selector. Here are a few simple steps to replacing your pickup selector.
The electric guitar was born out of necessity. Going back to the big band era, acoustic guitar players needed an instrument that could be heard over all the brass and woodwind instruments. They also need to be heard over the banjos and mandolins on the front porch. In the 1930s, companies such as Rickenbacker and Gibson started to add guitar pickups to their instruments, which allowed musicians to plug them into an amplifier for added volume. Rickenbacker added a pickup to their Hawaiian guitar (also known as a lap steel guitar) “Frying Pan” model, and similarly, Gibson added a pickup to their electric Hawaiian EH-150 model. Soon after that, Gibson introduced the iconic ES-150, which gave players the very best of both worlds. It gave guitarists a world-class Gibson hollow body guitar with a built-in pickup, which made it the perfect fit for guitarists who played large ensembles. In 1951, Fender revolutionized the electric guitar market even further by unveiling the first ever mass-produced solid body electric guitar, now known as the Telecaster, which was introduced in order to combat the feedback that hollow body electric guitars produced. Then in 1952, Gibson worked closely with one of the most widely respected guitarists of the era to create the first Gibson solid body electric guitar, now known as the Les Paul and named after its co-inventor.