Vox Amps - Vox is one of the largest musical instrument producers in the world and their products were utilized by almost every major music group during the nineteen sixties. From The Beatles to Lawrence Welk, VOX was the "voice" of a generation of musicians worldwide. Now they continue to produce their distinctive amps and effects, embracing modeling technology while retaining tube amp products, and at times combining them. They also produce instruments and other guitar/bass related gear.
As with so very many elements in the great world of guitar, however, once the novelty wore off and we were less awestruck by the new technology—and, in many cases, came to realize that we had little use for 2 seconds, or even 500 milliseconds of delay time—many of us came to miss the warm, pliable sound of the analog pedals. Today, as with all such things, the jury is still out; plenty of great players use each type of pedal, and the music you make with the technology remains more important than the type of technology you choose to use to make music. Used in isolation, at the same delay settings, each would probably sound just a little different to a guitarist with good ears. At the back end of a pedalboard with eight or ten other effects on it and three or four running at a time, the differences are likely to be negligible—but different players have different preferences, depending on what makes them feel good about their tone.
The best guitarists of all time, voted on and ranked by many music fans, with photos and other info. With help from the wisdom of the crowd, you'll find a comprehensive ranking of the greatest guitar players in history. All the top guitarists are on this list - monster guitar heroes from rock, metal, blues, and alternative music. Are you on Team Eddie or Team Jimi? How about both!

The Line 6 Spider Classic 15 is similar in many ways to the Fender Champion 20. It offers digital simulations of various amplifiers and built-in special effects. The two amps are usually priced identically. The reasons we didn’t make the Spider Classic 15 our top pick is that it’s much larger and heavier than the Fender (about 40 percent overall, at 14.7 by 15.7 by 8.3 inches and 18.4 pounds), and its controls work in an unusual fashion that sometimes frustrated our panelists.

Some emulator designs include switchable filters, enabling them to simulate open or closed-backed speaker cabinets, and can come very close to the sound of a close-miked amp, while ambience can be simulated using a reverb processor or plug-in. Even if the amp has a good spring reverb, a little additional digital ambience (mainly early reflections) will help create the illusion of the amplifier being recorded in a room.

The Model EP-17-T was a regular-sized thinline with a single round cutaway, bolt-on neck, non-dipped three-and-three head, dots, three pickups, adjustable bridge, plain trapeze tail, elevated guard, three rocker switches plate-mounted on the upper shoulder, and controls on a rectangular strip on the lower bout. All three were offered in shaded mahogany finish.
Fuzz was originally intended to recreate the classic 1960's tone of an overdriven tube amp combined with torn speaker cones. Oldschool guitar players (like Link Wray) (citation needed) would use a screwdriver to poke several holes through the paperboard part of the guitar amp speaker to achieve a similar sound. Since the original designs, more extreme fuzz pedals have been designed and produced, incorporating octave-up effects, oscillation, gating, and greater amounts of distortion.
Well built, beautiful rich sound and stays tuned. Made in Canada by the Godin family. The slim neck and close action makes it easy to play for those with smaller hands. I have the black Songsmith and will never part with it. Many of my friends and family thought I had spent $1000 to $1500 for it and were really surprised at the price under $400. Godin makes a nice case for it and all of their guitars for around $120.00. Definitely should be in the top 10 of best acoustic guitars!
The world of audio effects is one that can be confusing even for experienced engineers. Especially in modern computer-based recording systems, there's a bewildering array of options, and to add to the confusion, some effects are widely referred to by more than one name. In this article, I'll take you through the most common effects, explaining how they work and where you might want to use them in your music. Meanwhile, SOS 's team of writers has contributed a wealth of expert tips and tricks, which you can find in the boxes scattered through this article.
Traditional sets can sometimes feature vastly different tensions between strings, causing players to compensate with altered techniques. New York string icon D’Addario set out to even the playing field with its Balanced Tension XL sets, which boast mathematically equalised resistance for a similar feel from string to string. That means even effort when bending, strumming, plucking and slapping, and even improved dynamic control.
Whether you’re young or old, there’s no better feeling than learning to play an instrument. While many attempt to learn the guitar, it is unfortunately very common for beginners to give up after only a couple of months. Guitar lessons with an instructor can be expensive and it can be frustrating if you’re not seeing progress immediately. That’s where ChordBuddy steps in, offering one of the easiest and quickest ways to learn to play the guitar in 60 days or less. Simple, effective, and affordable, this guitar learning device has shown great success among beginner guitar players of every age. Use this handy guide to learn everything you need to know as a beginner guitarist. You’ll be playing your favorite song in no time at all!

A basic overview of how they function might, the volume pot will receive a signal from the pickup selector it will then transfer this signal to both the tone pot and output jack. Pots can also come as ‘blended’ in which case it will control two pickups and may even have a toggle switch dedicated to just the one pot. This is much less common and won’t play a role in assembling an electric guitar kit in most cases.
But this was different. This was build quality, and it completely wrecked the sound, feel and playability of the guitar. A competent pre-shipment QC inspection should have caught this and sent it back to be fixed at the factory, and they didn't. No serious guitarist would stand for ANY guitar made this way, at ANY price point. Yet there it was, on display on a guitar positioned as the flagship model of the brand, occupying the most expensive price point in the market.
The goal is to find the body shape and configuration that appeals the most to your eyes and ears. The most straightforward choice for beginners will be the solidbody for its durability. Players who are looking to expand their sonic palette are usually the ones who will take interest in semi-hollow and hollow body guitars. For more information on this topic read The Different Types of Electric Guitars Explained.
The so-called modeling amps can be said to differ from both tubes and solid state ones as they employ modern processing technology to apply preloaded characteristics to the sound. This can alter the output in a variety of ways, from imitating certain classic styles to rendering something entirely new. Needless to say, they are favored by cover bands and electronic music fans, but many guitarists don’t appreciate their “artificial” sound, although they can serve as good practice amps.   
During the first three decades of the 20th century, with the rising popularity of Hawaiian and big band music in America, guitar makers built larger-bodied instruments, using steel instead of gut strings, and metal instead of wood for the guitar body. Around 1925, John Dopyera designed a guitar with metal resonating cones built into the top that amplified the instrument’s sound. That suited twangy Hawaiian and blues music but not other genres. Then, in the 1920s, innovations in microphones and speakers, radio broadcasting, and the infant recording industry made electronic amplification for guitars possible. The volume was suddenly able to go up: way up.
Gibson Les Paul Studio Electric Guitar The Gibson Les Paul Studio electric guitar has been around since 1983. For 2018 Gibson upgraded one of its most well-loved models, fitting it with cryogenically treated frets for greater fret durability, adding fingerboard binding and giving it a Slim Taper neck profile. The core Les Paul tones and quality hardware and electronics are still there, of course.
According to the official information Guitar Tricks has more than double the number of song lessons than any other guitar learning site. It goes on to say that there are more than 600 but I feel that the number could be even higher by now because new songs are added regularly. The songs available on Guitar Tricks are the ones that I want to learn, oldies and modern songs from major artists like The Beatles, The Rolling Stones, Eagles, Blink-182, Extreme, Good Charlotte and many more. Check out this list of Guitar Tricks Artists. Did I mention that lots of songs have a beginner and an advanced level lesson? I just love that the advanced level songs are taught based on the original arrangement and not some vague resemblance used to avoid copyright issues. This is because Guitar Tricks has licenses for teaching the original songs.
{"id": "113469598", "categoryId":"site5AAG", "name":"Vintage 1960s K300 Solid Body Electric Guitar", "pageUrl":"/Used/Old-Kraftsman/Vintage-1960s-K300-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/1960s-K300-Solid-Body-Electric-Guitar/000000113469598-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"539.99", "priceMin":"539.99", "priceMax":"539.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"60.00", "priceSavingsMaxPercent":"6,000", "inventory":"1", "brand":"Old Kraftsman", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Price Drop", "isVintage": "1", "outletonly": "", "checksum":"234720911023", "priceVisibility": "", "itemType": "Vintage"}
In October 2017, Gibson announced plans to relocate its Memphis operations to a smaller location and plans to sell the Memphis property. Gibson opened its Memphis facility 18 years before, which occupies just a portion of a massive 127,620 square foot complex. According to the Memphis Daily News, Gibson plans to search for a new facility for its Memphis operations and will stay in the current spot for the next 18 to 24 months. The facility, which sits across from the FedExForum along South B.B. King Boulevard, is expected to list for $17 million.
The Gretsch G5421 Jet Club in Firebird Red is one of our favourite cheap electric guitars that features superb, world class build quality at an extremely budget friendly price tag. This is a professional level guitar at beginner prices and an absolute workhorse ready to be unleashed upon the stage of the world or just to accompany you on your journey into guitar. A chambered basswood body construction makes the guitar light on the shoulder but also provides a fantastic resonance and crispy treble.
This guitar continues to rake in good reviews and recommendations, even from experienced players who are looking for a compact couch guitar. This says much about its build-quality, tone and production consistency. If you are just starting out and you are not sure what to get, or you're simply looking for an affordable grab-and-go guitar, then checkout the Yamaha JR1.
Description: Body: Mahogany - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Rosewood - Binding: Cream - Frets: 22, Medium - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tone Pros - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Grover Tuners - Pickups: Duncan Designed - String Instrument Finish: Vintage White, Vintage Gold Top, Black
The EM-18 came with either a pair of Mighty Mite humbuckers or a pair of DiMarzios. It was otherwise the same as the E-18 with the addition of a three-way mini-toggle coil selector switch which allowed a choice of both or either coil on the lead pickup. This arrangement allowed for a rather remarkable variety of tones, by the way. EM-18 production began in 1979 and some 1,375 were made until the guitar ended in February 1982.

@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.
I own a v100 gold top modified to fit regular humbuckers and boy it is great. I have played it with gibson lps and it holds it own. Not as nice really but damn it sounds great. I have an SG too but have never played an SG before this guitar. I am weirded out by the light body. Are they all like that? I know they are all neck heavy but this seems out of order. I do like the sg though more every time I pick it up.
Del Rey, of course, is Spanish for “of the king,” which explains the crown. This was no doubt added to the Teisco name, in part, to suggest quality. However, it was also a way to add the de rigeur Spanish cachet necessary for “Spanish” guitars of the time. It was convention that “Spanish” guitars carried Spanish names, except for the well-known brand names – Gibson, Fender, Martin or Kay; thus the plethora of imported guitars named Greco, Ibanez, Goya and Espa�a. Of course, none of these were made in Spain, but rather in Japan, Japan, Sweden and Finland, respectively!
The LP-100 is among the most affordable, but also the most popular Epiphone models. It is the quintessential beginner guitar. Epiphone Les Paul-100 brings you that classic aesthetic in a package that is affordable and capable of sounding rather great. While it’s not something you’d want to do a world tour with, this Epiphone is perfect for beginners and intermediate players.

While jazz can be played on any type of guitar, from an acoustic instrument to a solid-bodied electric guitar such as a Fender Stratocaster, the full-depth archtop guitar has become known as the prototypical "jazz guitar." Archtop guitars are steel-string acoustic guitars with a big soundbox, arched top, violin-style f-holes, a "floating bridge" and magnetic or piezoelectric pickups. Early makers of jazz guitars included Gibson, Epiphone, D'Angelico and Stromberg. The electric guitar is plugged into a guitar amplifier to make it sound loud enough for performance. Guitar amplifiers have equalizer controls that allow the guitarist to change the tone of the instrument, by emphasizing or de-emphasizing certain frequency bands. The use of reverb effects, which are often included in guitar amplifiers, has long been part of the jazz guitar sound. Particularly since the 1970s jazz fusion era, some jazz guitarists have also used effects pedals such as overdrive pedals, chorus pedals and wah pedals.
Ovation Instruments is a Division of Kaman Corporation, a major supplier to the United States government of military helicopters, rescue equipment, electronic components and other aerospace products. There are eight divisions of Kaman, participating in such diverse industries as commercial transportation, nuclear sciences, space medicine, education and social sciences, oceanography and, most recently, recreation.

Pictures, description and soundclips from a 1973 Fender Musicmaster bass. The Musicmaster bass changed very little between it's introduction in 1970, and it's deletion in the early 1980s. Although often regarded as a student bass, the Musicmaster was of high enough quality, both in terms of components and build, to sell to student guitarists and more advanced players looking for an affordable shortscale bass.

Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Mahogany - Back: Solid Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Dovetail - Neck Construction: V-Shape - Fingerboard: Maple - Binding: Ivoroid - Frets: 20 - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Maple - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Open Pore Natural
Kramer served a prison sentence on drug-related charges after the MC5 split up. When he got out, he teamed up with Johnny Thunders to form Gang War and later re-emerged as a solo artist on L.A. punk label Epitaph. Smith went on to lead the punishingly loud Sonic Rendezvous Band and married New York punk rock poet, artist, singer and originator Patti Smith. He passed away in 1994. But from the Clash to Fugazi, Crass and Green Day, the politicized wing of punk rock continues to fly the banner first raised by the Motor City 5.

I was a guitarist for almost 18 years now I am a session musician. For me choosing the best string gauge is one of the most important things a guitarist should know. During those early years our band tends to play on Heavy metal music and if you are using those lighter string gauge its ineffective for those kind of genres. So at that point I have been using .011 or .013 string gauges to gain fat tones and huge sustain. But however as years goes by we tend to play lighter music so I am using .09 and .010 string gauges. For me using those heavier strings for a long time will cause damage in your wrist, after acquiring a carpal tunnel syndrome I have used lighter strings in my guitar.
Conceived in the early 1930s, the electric guitar became a necessity as jazz musicians sought to amplify their sound to be heard over loud big bands. When guitarists in big bands only had acoustic guitars, all they could do was play chords; they could not play solos because the acoustic guitar is not a loud instrument. Once guitarists switched from acoustic guitar to semi-acoustic guitar and began using guitar amplifiers, it made the guitar much easier to hear, which enabled guitarists to play guitar solos. Jazz guitar had an important influence on jazz in the beginning of the twentieth century. Although the earliest guitars used in jazz were acoustic and acoustic guitars are still sometimes used in jazz, most jazz guitarists since the 1940s have performed on an electrically amplified guitar or electric guitar.
One of my favourite hardware effect units is the Electrix Mo-FX (sadly no longer in production). It is superbly constructed for hands-on performance and it offers full MIDI control over the panel's knobs and buttons. I use this in conjunction with the Sequentix P3 (a hardware step sequencer). Not only can the P3 generate patterns of controllers suitable for varying multiple Mo-FX parameters, but it can generate evolving or shifting patterns, courtesy of its 'accumulators'. In a nutshell, accumulators are designed to prevent your sequences becoming annoyingly repetitive: controller values (actually values directed at any internal sequencer parameter) can be added or subtracted on each pass of the pattern, with rules and limits directing the behaviour as the accumulation progresses. Digging through the Mo-FX manual quickly reveals all the MIDI Continuous Controllers you need. Usefully, you can also trigger the tap-tempo function via MIDI, and this offers a rather wonderful way of generating clock intervals. As you can decide exactly where to place your tap-tempo trigger events, and the P3 sequencer can shift or vary these events according to rules you devise, you can find clock sync intervals unseen on any other device. Paul Nagle
The way you fix this is by finding a book that makes you reconsider an aspect of your playing, regardless of what that is. If you’re into metal go ahead and pick up a book on Gypsy jazz. If you’re a dedicated Bluegrass flatpicker try your hand at learning some jazz. If you learn one thing from a different genre that you can routinely apply to your genre of choice you can break yourself out of just about any rut imaginable.

Guitarists have their own special system of music notation called guitar tablature, or "guitar tabs" for short. Using guitar tabs, a guitarist can play a wide variety of music without ever having to learn how to read standard sheet music. Though guitar tabs aren't a perfect way of describing music, they've allowed newer generations of guitarists to quickly and easily share information about how to play songs across the globe via the internet. Every guitarist should have at least a basic understanding of how to read tablature - it's the de facto shorthand for much of the guitar music you'll find written out online.

An equalizer (more often called EQ) is the device that allows you to adjust certain frequencies within your tone. The 3-band part implies that the EQ offers three points of control: bass, middle and treble. While 3-band is the standard, you can also have 2-Band EQ (which tend to offer just bass and treble), as well as 4-band EQ, 5-band EQ (low-bass, mid-bass, midrange, upper-midrange, treble) and upwards! Of course, the higher the band, the more versatility the amp offers. But 3-band tends to be the easiest to get to grips with.
One of the greatest things about being a touring musician is having the opportunity to see, hear and play with some of the greatest guitarists on the planet. Over the course of my career, I’ve performed with legendary guitarists like Ted Nugent, Steve Cropper, and Glen Campbell, to drop just a few names. Playing lead for a headline act like Toby Keith also allows me to watch fantastic guitarists like Keith Urban and Brad Paisley take the stage before me.
There aren’t really any structured lessons—like, where you’re starting at the beginning and working your way sequentially through—you have to browse through the playlists and find what’s best, but the quality of the lessons and wide variety of topics will have everything covered. JamPlay is a sampler for the website, where you’re offered a subscription service to complete courses, which explains the kind of shotgun approach to the videos made available on YouTube. But the size and breadth of the topics you can access for free still makes it a great channel.
A switch is a device that segments networks into different subnets. Segmenting the network into different subnets keeps one network from overloading with traffic. Therefore, a switch forwards all data in the data layer and sometimes the network layer as it filters the data. A switch allows a connection to be established and it terminates a connection when there is no longer a session to support. Prior to switches there were hubs. Hubs also connected multiple independent (connected) modules in a network, but they were not as efficient as switches. Since most switches work in Layer 2, and not in Layer 1 like a hub, they are better at filtering data. A switch looks for Ethernet MAC addresses, keeps a table (the bridge forwarding table) of these addresses, and navigates the switch between ports. The switch prevents collisions and gives full bandwidth to each connection at the switch port. Switches save bandwidth by only sending traffic to destinations that have traffic. When a switch switches Ethernet frames, they monitor the traffic for the response from that frame and see what device, on what port, responds to that flooded frame. There are different types of switches that range from "dumb" switches that lack manageability and can monitor only 4-8 ports to "managed" switches that can get statistics on switch traffic, monitor connections, and hard-code up to 96 port speeds and duplex. Then again, there are "chassis-based" switches with blades or cards that perform not just switching, but routing and intrusion detection too! If you are interested in this, look into Cisco's Catalyst 6500 Series. Another type of switch preferred by large enterprises is the "Layer 3 Switch," because it has the functionality of a router .
There are many variations on the solid-body guitar theme. Companies such as Ibanez, Yamaha, PRS, Jackson and many others make solid-bodied guitars. Generally you get what you pay for, but provided you avoid the very cheapest models, and stick with reputable brands (such as those mentioned above) you can spend a relatively small amount of money and get a guitar that will last you long into your playing career.

The Yamaha LL16 gives you high-end features for a lot less money, starting off with its solid Engelmann spruce top and solid rosewood back and sides. This all solid body results in richer and more detailed acoustic tone, something that you will have to pay top dollars for from other acoustic brands. It also sports a slightly smaller body that gives it an elegant appeal, adding to its already favorable affordable price and top-tier specs.
Learning to do your own setup is just as important as learning how to play. If you feel uncomfortable doing it, go to a pawn shop and spend that 50 bucks you would have spent on a setup and buy a hack bass instead and pratcice on that. You can also practice your soldering and anything else without fear of ruining it and end up saving a ton of money in the long run!

If you're anything like me, you started out with a basic beginner's guitar, and over time you realized that you were ready for something better. I had a Squier Telecaster(standard series) and I was ready for a change. I was set on a Les Paul of some sort, possibly a used LP Standard. I read tons of reviews, then I started reading some of the Epi Les Pauls(the nicer ones, $400-500).
Hey! I just opened up my 1984 g&l for the first time today and I found a design very similar to this. I had always loved the tone control on it but was too nervous to open it up for whatever goofy reason. I may try to draw it out and share it but maybe include a picture at some point as well. I’m glad someone else has looked at this because it definitely threw me for a loop when I first saw the two caps both headed to ground.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
{ "thumbImageID": "FA-135CE-Concert-Acoustic-Electric-Guitar-3-Color-Sunburst/L00658000003000", "defaultDisplayName": "Fender FA-135CE Concert Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst", "sku": "sku:site51500000204613", "price": "169.99", "regularPrice": "199.99", "msrpPrice": "200.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Concert-Acoustic-Electric-Guitar-3-Color-Sunburst-1500000204613.gc", "skuImageId": "FA-135CE-Concert-Acoustic-Electric-Guitar-3-Color-Sunburst/L00658000003000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FA-135CE-Concert-Acoustic-Electric-Guitar-3-Color-Sunburst/L00658000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000204612", "price": "169.99", "regularPrice": "199.99", "msrpPrice": "200.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Concert-Acoustic-Electric-Guitar-Natural-1500000204612.gc", "skuImageId": "FA-135CE-Concert-Acoustic-Electric-Guitar-Natural/L00658000002000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FA-135CE-Concert-Acoustic-Electric-Guitar-Natural/L00658000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000204611", "price": "169.99", "regularPrice": "199.99", "msrpPrice": "200.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Concert-Acoustic-Electric-Guitar-Black-1500000204611.gc", "skuImageId": "FA-135CE-Concert-Acoustic-Electric-Guitar-Black/L00658000001000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FA-135CE-Concert-Acoustic-Electric-Guitar-Black/L00658000001000-00-60x60.jpg", "imgAlt": "" } ] }
Nice-Keys-Extreme-2.0  Still a big SoundFont set at 1gb or 1000mb (645mb dedicated to 3 pianos with 6 velocity layers). Similar to the top set but the main piano is a little less detailed so it leaves room for an extra piano (Steinways).  PC users should not have any problems or if running on iOS this set runs perfectly well on iPhone 6s or iPad Air 2. It is still possible to load this set within the bs-16i app and run Sweet Midi Player app using GM set one at the same time for midi backing if required. This set has everything described below plus the addition of guitars.
The OO-18E was basically the small-bodied OO-18 acoustic with mahogany back and sides, spruce top, and the ring-mounted DeArmond tucked right at the end of the fingerboard. These featured one tone and one volume control, with large two-tone plastic knobs situated down on the lower treble bout. The first prototype was serial number 166839. OO-18Es were produced from 1959 to 1964. Around 1,526 of these were produced.
For some performances - those well controlled performances of an orchestral guitarist, let's say - machine notation can get a lot closer to producing a true sound than it will to the variations offered by a virtuoso jazz guitarist, blues master or metal thrasher jamming outside the box. In some cases, the machine sound might already fool some of the most discerning listeners -- if the performance does not test the limits of the mechanical emulation.

Think "guitar god," and a particular image of Jimi Hendrix springs to mind: Hendrix kneeling, shamanlike, before his Fender Stratocaster, his hands seeming to coax flames from the instrument. Captured by photographer Jim Marshall at the 1967 Monterey Pop Festival, this image is burned into the collective consciousness of American rock culture in the same way that Hendrix's signature sound still echoes through the years. His defiant rendition of the "Star Spangled Banner" isn't quite a technical masterpiece -- one could almost play the melody with a single finger. What elevates the song is its sound. To get that dissonant wailing, Hendrix uses two effects: an Arbiter Fuzz Face and the Vox Wah-Wah [source: Trynka].
Want to write blazing leads and screaming solos? Crank the pitch bend up, use one of four vibrato modes, and shred to your heart's content. Need some ultra-chunky rhythm chugs? S2 features both single-note and powerchord palm mutes with up to 5 layers and 8 variations each, offering superior realism and maximum options. While it excels at rock & metal playing (both lead and rhythm alike), it is also well-suited for many other genres thanks to its clean tone and huge range.
To wire three two-conductor pickups we only need one pole. Common goes to volume pot input and 3 switched terminals are connected to pickup outputs. That way, we will select one pickup in positions 1-3-5 and two pickups wired in parallel in positions 2-4. When middle pickup has reverse polarity, noise will cancel out in positions 2-4 and they will be wired in so called “humbucking” mode.
You may be questioning why we’ve not covered bass pickups in this article. However, to keep things simple, we decided to stick solely to guitar pickups. If you are looking for a new tone or more power for your beloved bass, check out our dedicated articles on Jazz Bass pickups and Precision Bass pickups for all you need to know, as well as recommendations.
Gibson's factories were raided in 2009 and 2011 by agents of the United States Fish and Wildlife Service (FWS). In November 2009 authorities found illegally imported ebony wood from Madagascar.[37][38] A second raid was conducted in August 2011,[37] during which the FWS seized wood imports from India that had been mislabeled on the US Customs declaration.[39][40] Gibson Guitar Corp. filed a motion in January 2011 to recover seized materials and overturn the charges, which was denied by the court.[41][42]
The Canadian firm Godwin is another popular name for producing best quality electric and acoustic guitars. (Have you heard of Seagull acoustic guitars? It’s the same brand.) Godwin outshines among the world of guitars due to producing high-end instruments with surprising variations. They even manage to touch bass too. Not only the Godwin guitars depict quality, but also reflect classiness.

I’ve been keeping track of completed Ebay sales since I started looking at Kents, and have come up with a few average sale prices. The way I figure an average is by first tossing out the highest and lowest sales. If I am left with fewer than three sales I don’t bother. That’s too small a sampling to be worthwhile, otherwise I take the average of the rest. The table below will only be updated when there is a sale that results in a change, so if the table looks like it might be dated, it’s probably because there haven’t been any sales that affected the numbers. Availability of Kent guitars on Ebay seems to ebb and flow.

Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
Jump up ^ Hicks, Michael (2000). Sixties Rock: Garage, Psychedelic, and Other Satisfactions. University of Illinois Press. p. 18. ISBN 0-252-06915-3. While most of the documentation on early fuzz boxes has been discarded or lost, the earliest such devices appear to have been introduced in 1962. The best known from that year was the Maestro Fuzztone FZ-1...
A giant when it comes to the British amplification companies, Vox is always in the conversation when talking about great guitar gear. And that’s no different when the conversation is about amps for beginners. As far as bang-for-your-buck options are concerned, the Valvetronix VT20X definitely ranks at the top – and with good reason: it features tube amp sounds, but with the versatility of a modeling amp (which it is). This impressive hybrid boasts 11 onboard models, 13 effects, and 33 preset programs – allowing you an astonishingly wide range of produceable sounds. And you can control the whole thing from your smartphone, making it easier than ever before. Excellent work, Vox.
Taper – the ratio of wiper travel to the resistance between the wiper and the outer lugs. Logarithmic pots (also known as "log" or "audio" pots, and designated with the letter A) are generally used for volume controls, due to the human ear's response to sound pressure being roughly logarithmic, whereas tone controls can employ both logarithmic and linear pots (designated with the letter B), depending on personal preferences and wiring arrangements.[5][6] Reverse audio pots are sometimes used for volume controls on left-hand guitars, but this is not widespread due to the relative rarity of such pots.

Other defining features include its 3 on a side tuners on a painted headstock, a bound neck and body with trapezoid or block inlays on rosewood or ebony, and its Tune-O-Matic bridge with the Stop Bar tailpiece.  While some of these features are wonderfully cosmetic, the components such as the bridge set-up and pickup selection gave the Les Paul the massive sound and sustain for which the guitar is renowned.
I bought a Palmer acoustic-electric about 10 years ago, for 185.00, used, it's white, with black trim, and still plays very well. I also can't find out where it's made, the neck is still straight, and the tone is good. It says hand crafted inside, and model p-38-12 and a letter I don't recognise, or is a misprint. the pick-ups are near the last frets, small screws, almost hidden. The neck is kinda wide, but you get used to it. Thats all for now, I'll bet all their guitars are pretty good.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"delay & reverb effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}

There are different ways to play electric guitar. One is to just play the electric guitar, and to take it as it is. Another way is to play the guitar as a sort of synthesizer. With the right effects (delay, reverb, volume swells, added octaves), no one would even know that it was a guitar. Neither way is wrong, but we refer to both as "playing electric guitar" even though they're being used in completely different ways that may as well be different instruments. Drama ensues.

Drop A in D standard variation - A-G-C-F-a-D: Used by Mastodon on most of their first album (Remission) and on some songs on other albums. Also utilized by Periphery on the song "Zyglrox" as well as "Alpha" and "The Bad Thing." Also used on occasion by Black Label Society, who previously tuned it a half-step up, which Alter Bridge also utilizes on some of their songs such as "Broken Wings", "Come to Life", "I Know it Hurts", "Still Remains", "Breath Again", and "All Hope is Gone." Creed, Architects, and Sevendust all use this tuning tuned a half-step down on their songs "Bread of Shame", "Early Grave", and "Home" and "Chop" respectively, with the latter also tuning down a full step for the songs "Death Dance" and "Not Today". Danish industrial metal band Raunchy used this tuning tuned one and a half-step down (F#-E-A-D-f#-B) on the song "Dim the Lights and Run" from the album A Discord Electric. Wage War also utilize this tuning one whole step down for songs like "The River" and "Spineless" off their album Blueprints.
Like the Les Paul, the SG guitar models has an iconic status and it is another guitar coming from Gibson that has been passed-on to Epiphone to cater a wider audience because it carries a much friendlier price. This SG Special has the famous devilish cutaway body made from mahogany and has a bolt-on okoume neck with a comfortable to play slim tapered D-profile having 22 frets.
Other high-quality specifications include a bone nut, a molded metal jack plate that is curved and makes plugging and unplugging a guitar cable hassle-free, retooled knobs, fretwire that is slightly smaller than what you’d find on most PRS electric guitars, and PRS’s double action truss rod (accessible from the front of the headstock for ease of use).
The frets are the little metal pieces that are installed in the instrument's neck. Frets do not make a significant difference in the sound of the instrument. They come in various sizes and materials. If you're just starting out, we recommend choosing Medium size frets made of Nickel-Silver. For a more scalloped feel, we recommend Extra Jumbo size frets. For increased durability (wear-and-tear), we recommend Stainless Steel frets. Some customers have reported stainless steel frets to be very slippery and brighter sounding when compared to nickel-silver frets – this could be a good, or a bad thing depending on the player.
In the 1960s Japanese guitar makers started to mainly copy American guitar designs and Ibanez branded copies of Gibson, Fender and Rickenbacker models started to appear. This resulted in the so called Ibanez lawsuit period. After the lawsuit period Hoshino Gakki introduced Ibanez models that were not copies of the Gibson or Fender designs such as the Iceman and Roadster. The company has produced its own guitar designs ever since. The late 1980s and early 1990s were an important period for the Ibanez brand. Hoshino Gakki's relationship with Frank Zappa's former guitarist Steve Vai resulted in the introduction of the Ibanez JEM and the Ibanez Universe models and after the earlier successes of the Roadster and Iceman models in the late 1970s/early 1980s, Hoshino Gakki entered the superstrat market with the RG series which were a lower priced version of the Ibanez JEM model.
If you do want to use single pedals then BOSS compact pedals come with a buffer circuit that converts your high impedance input into a low impedance output. For a more detailed discussion on the topic of single pedal buffers check out Steve Henderson’s excellent article here: https://www.rolandcorp.com.au/blog/buffered-effects-true-bypass-and-boss-pedals-by-steve-henderson
One important thing to keep in mind about effects pedals is that the signal is doing a lot of work going through the complex electronics in them, and some effects play better as inputs for others. This all means that the order of your pedals does matter to some degree, depending on which effects are in the lineup. You can, of course, experiment to see how different orders affect the sound and that can be part of creating your own signature effects profile. But as a rule of thumb, here’s the basic order you should follow for your first foray into effects chaining:
Crafted with quality body woods, it features a solid cedar top with a wild cherry back and produces a dynamic sound with a good mid-range that projects wonderfully. Sitting at the top is a distinctive, tapered headstock, which allows for greater tuning stability, while the hand-finished silver leaf maple neck – with rosewood fretboard – is slightly fatter than other acoustics, and is great for fingerstyle guitarists.
Dude, John Mayer? unbelievable. Angus young, Gary moore I agree Eric Clapton you bet. but, it is an opinion. I think Michael Schenker is badass, and what about Steve Morse. I just saw Rush in Rio, and I forgot just how good Alex lifeson is. What about George Lynch? Tony MacAlpine. so I will let you have John Mayer, because he makes you feel something, for me, it's nausea…..Oh, and I forgot Brian May. Doyle Bramhall, I could go on.
The numbers below the chord tell you which fingers you should be using to form the chord. Finger one is the finger closest to your thumb and then it goes across until finger four is your pinky. The image below shows this labelled for you. If you're playing a left handed guitar you'll have to use the mirror image of these pictures. The thumb doesn't get a number because it is very, very rarely used when forming chords.

While I’m on the subject of guitar myths... Many sellers of vintage Japanese guitars have been throwing around the term “lawsuit guitar”, although not usually in reference to Kents. In 1977 the Norlin Company, which owned Gibson at the time, sued Elger Guitars, which was the U.S. distributing arm of Hoshino Gakki of Japan. The suit claimed that Hoshino-made Ibanez guitars too-closely copied the headstock design of Gibson. Just the headstock. By the time the suit was brought out, Hoshino had already changed to a headstock more closely resembling what was on Guild guitars of the time. So it was pretty easy for Elger Guitars/Hoshino to promise not to copy the Gibson headstock anymore.
I have to say I'm an Impact Soundworks fan. I haven't listened to the Archtop demos, but another one from them is Django Gypsy Jazz Guitar. The sound is stunning to me, both lead and rhythm. However, it depends on what style you're going for. It's not going to be as versatile as some other acoustic options, but what it does it does very well. I don't have it but it's on my buy list. I own Shreddage II SRP and it's my favorite electric because of the interface and playability.
Mahogany is a very dense, strong wood used in all parts of guitar manufacture except fretboards and bridges, which require harder wood. A mahogany neck and back are often found on short-scale guitars with maple tops. Another common combination is an all-mahogany body and neck (excluding the fretboard). Because mahogany is not very hard, it emphasizes the midrange and bass frequencies for a mellower guitar tone. Mahogany is a very resonant wood which enhances a guitar's sustain. It is generally a uniform rich brown color.
Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]

If you really like to cover all options, record using any of the above methods but also take a straight DI feed with no effects and record that onto a separate track so that you can process it later. Some engineers have been known to use a recorded DI guitar track to drive a guitar amplifier, which is then miked up and re-recorded, but you could take the easier route of using a hardware recording preamp or a guitar amp emulator plug-in to process the track.

There is also a niche market for modifying or "modding" effects.[citation needed] Typically,[according to whom?] vendors provide either custom modification services or sell new effects pedals they have already modified.[citation needed] The Ibanez Tube Screamer, Boss DS-1, Pro Co RAT and DigiTech Whammy are some of the most often-modified effects.[101][102] Common modifications include value changes in capacitors or resistors, adding true-bypass so that the effect's circuitry is no longer in the signal path, substituting higher-quality components, replacing the unit's original operational amplifiers (op-amps), or adding functions to the device, such as allowing additional control of some factor or adding another output jack.[101][103][104]
The guitar sports an AAA flame maple top on a three-piece mahogany body, whose Translucent Black finish was picked by the man in the top hat himself. The iconic Firebird pickguard sits prominently on the axe, but this one features Slash’s “Skull & Top Hat” logo. The mahogany neck comes in a custom profile, too, which is rounded but slim enough for searing fretwork. A pau ferro fingerboard with trapezoid pearl inlays completes the cosmetic concerns on the axe.

Based both in Japan and the USA, this Japanese manufacturer produces guitars under different brand names: "ESP Standard," "ESP Custom Shop," "LTD Guitars and Basses," "Navigator," "Edwards Guitar and Basses," and "Grass Roots." Hisatake Shibuya opened his "Electric Sound Product" store in 1975 where he used to sell guitar spare parts. He then started to build his own parts and became a Kramer and Schecter subcontractor. His first signature guitar went to George Lynch (the Kamikaze), while the powerful Gibson Explorer copy designed for metal heads and adopted by a certain James Hetfield (Metallica) became almost as popular as its owner in the late 1980's and early 1990's.
The Archtone acoustics were some of the most popular guitars ever produced by Harmony. While production totals are unavailable, we can safely say that tens of thousands of these instruments were manufactured. The Archtone had a non-cutaway body and was advertised as being constructed from hardwoods. These “hardwoods” were actually birch (grained to resemble mahogany and spruce) and maple (grained to look like rosewood) for the fretboard. The binding was actually painted on!
12. Once your wiring loom is complete, install it in the guitar, and reattach the pickup and ground wires. Test the guitar through your amp and make sure everything is working. If it is, congratulate yourself on a job well done. If it’s not, check that you’ve wired everything together properly. Also, check your solder joints and redo any that aren’t shiny or look a little iffy.
The Epiphone LP Special II Les Paul Collection Electric Guitar is a GREAT GUITAR for $169.00 (The average selling price at the time of this review). The pickups, tune-o-matic bridge and stop piece are the same ones used in Epiphone's more expensive guitars, and are similar to what's used in much more expensive Gibsons. Although the tone adjustments have been simplified to a toggle between the three pickup combinations and an overall tone control for both pickups, this is not as big a deal as many might make of it. Given the vast array of other things that influence electric guitar sound -- strings, amp choice and settings, effects pedals and so forth -- the guitar sounds great as is.
Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.