At one point, Fender switched to producing guitars with the bridge pickup located farthest from the highest-amplitude portion of the vibrating strings, slightly “over-wound”, thus increasing the signal output from that pickup. Even more overwound pickups (“hot-wired” designs) became popular, either for all three pickups (a “hot” configuration), or for the bridge position only (so-called “Texas Hot” due to its popularity among Southern Rock guitarists).
"Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired
A soldering iron is basically a tool that allows you to transfer heat that in turn melts the solder which is used to join two pieces of metal. The heat is supplied electrically (this wasn’t always the case) and the soldering iron itself will have an insulated handle protecting you from the heat generated. For some useful tips on best practice for soldering click here:
You can reach me by phone all day(8am until 5pm) on Monday through Saturday  If I don't answer I probably have machinery running or have both hands busy but leave a message and I will call you back shortly. During off hours please leave a message and I will call you that evening or the next morning. Feel free to email me with any general questions you may have.

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

Alonso de Mudarra's book Tres Libros de Música, published in Spain in 1546, contains the earliest known written pieces for a four-course guitarra. This four-course "guitar" was popular in France, Spain, and Italy. In France this instrument gained popularity among aristocrats. A considerable volume of music was published in Paris from the 1550s to the 1570s: Simon Gorlier's Le Troysième Livre... mis en tablature de Guiterne was published in 1551. In 1551 Adrian Le Roy also published his Premier Livre de Tablature de Guiterne, and in the same year he also published Briefve et facile instruction pour apprendre la tablature a bien accorder, conduire, et disposer la main sur la Guiterne. Robert Ballard, Grégoire Brayssing from Augsburg, and Guillaume Morlaye (c. 1510 – c. 1558) significantly contributed to its repertoire. Morlaye's Le Premier Livre de Chansons, Gaillardes, Pavannes, Bransles, Almandes, Fantasies – which has a four-course instrument illustrated on its title page – was published in partnership with Michel Fedenzat, and among other music, they published six books of tablature by lutenist Albert de Rippe (who was very likely Guillaume's teacher).
And for those who don't feel ready to tackle songs yet - or just need a refresher on guitar play - "Rocksmith 2014" has 1980s-looking Guitarcade games to help you work on various skills. "Gone Wailin'!" is a "Jetpack Joyride"-esque game where you fly through the air to catch bananas; how high and low you fly depends on how loud you play. In another, "String Skip Saloon," you shoot bandits by plucking the right string. With no time to look down, you have to learn which string is which.

While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.

Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.

Jazz guitarists need to learn about a range of different chords, including major 7th, major 6th, minor 7th, minor/major 7th, dominant 7th, diminished, half-diminished, and augmented chords. As well, they need to learn about chord transformations (e.g., altered chords, such as "alt dominant chords" described above), chord substitutions, and re-harmonization techniques. Some jazz guitarists use their knowledge of jazz scales and chords to provide a walking bass-style accompaniment.
Description: Guitar Type: Bass - Bass Type: Electric Solid Body - Body: Alder - Top Wood: Maple - Flamed - Neck Wood: Maple - Neck Attachment: Bolt - Neck Construction: 3 Piece - Nut Width: 54mm - Fingerboard: Rosewood - Frets: 24, Medium - Inlay: Abalone - # of Strings: 6 - Scale Length: 34" (86cm) - Headstock: 3+3 - Bridge: Mono-Rail IV - Cutaway: Double - Hardware: Black - Circuit Type: Active - Pickups: Bartolini Humbucker - EQ/Preamp: 3 Band - String Instrument Finish: Amber
In the late 1950s, various guitars in the Kay line were assigned new model numbers; according to the 1959 catalog, the Thin Twin became K5910 and the Electronic Bass became K5965.[18] Both instruments remained in Kay's catalog offerings with only minor cosmetic variations until 1966, when Kay revamped its entire guitar line to only feature budget instruments. Kay also manufactured versions of the Thin Twin guitar under the Silvertone (Sears) and Old Kraftsman (Spiegel) brands.
It is also believed that 'Terada Musical Instrument Co., Ltd. of Japan also made some guitars for Ibanez during this period.' It's thought that 'these would be mostly hollow-body guitars, but may also included some solid-body Artist series models.' There is no proof whatsoever for either of these assumptions. It's most likely that this is a big misunderstanding caused by an over generalization in the database of the "Guitar Dater Project" website, which is not able to assign the right factory to a vintage Ibanez guitar based on its serial number. The false information this website generates has been propogated in numerous advertisements of sellers of vintage Ibanez guitars. There is no proof whatsoever of any solid body Ibanez guitar produced by Terada. On the contrary: the fact that the production of solid body Ibanez Artist guitars shifted to Iida Gakki 1987, while hollow-body and semi-hollow Artist guitars became Artstar labels with H serial numbers, shows that the original production before 1987 came all from the FujiGen Gakki factory, which was experiencing capacity problems during that time period caused by their commitment to produce guitars for Fender Japan. If Terada had produced AR models already, they would have continued doing so. The AR and AS models shared the same necks under the Artist flag. Splitting the production up from a situation in which they were already both made in the Terada factory wouldn't be efficient, so it is highly unlikely that pre-1987 AR and AS models were ever made there.

Guyatone produced electric guitars for major guitar manufacturer Suzuki. The company also produced their house brand Guyatone. Badged guitars produced by Guyatone include Barclay, Broadway, Coronado, Crestwood, Futurama, Howard, Ibanez, Ideal, Imperial, Johnny Guitar, Kent, Kingston, Lafayette, Marco Polo (electrics only), Montclair, Omega, Orpheus, Prestige, Royalist, Saturn, Silhouette, Silvertone, Vernon, Winston and Zenta, an impressive amount of names produced by a single company. Other badges that may have been produced by Guyatone are Beeton (not to be confused by the Beeton Brass Guitar company founded in 1994), Bradford, Canora and Regent.

“The bottom line is you get a better dynamic response from the coil. Most people who play a hand-wound pickup say it sounds more ‘open’. It’s easy to make a pickup sound brighter but to have a truly open voice it’s got to be dynamically responsive – and that’s what scatter-winding [intentionally irregular hand-winding of a pickup coil] does. Also, compared to a machine-wound coil, the frequency response is slightly extended. So the sound is bigger and you hear more not just in the high frequencies but also in the depths of the frequency response.”
Analyzing the notes you are playing plays an important role while you are performing. The built-in chromatic tuner in these pedals shows you the live feed of your notes whether they are sharp, flat or dead. Similarly, one can bypass the currently selected sound fx for maintaining a pure sound when tuning or completely mute the signal for a uniform silence.
{ "thumbImageID": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "defaultDisplayName": "Epiphone Les Paul Custom PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Alpine White", "sku": "sku:site51321473136588", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White-1321473136588.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Alpine-White/H79039000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51321473136458", "price": "679.00", "regularPrice": "679.00", "msrpPrice": "1,132.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Custom-PRO-Electric-Guitar-Ebony-1321473136458.gc", "skuImageId": "Les-Paul-Custom-PRO-Electric-Guitar-Ebony/H79039000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
12 Month Financing: For a limited time, purchase $599 or more using the Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.
{"id": "113668304", "categoryId":"site5AAG", "name":"Vintage 1984 1984 Ibanez Destroyer I Red Solid Body Electric Guitar", "pageUrl":"/Used/Ibanez/Vintage-1984-1984-Ibanez-Destroyer-I-Red-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"", "priceMin":"", "priceMax":"", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "1", "outletonly": "", "checksum":"", "priceVisibility": "", "itemType": "Vintage"}
This is one of the most frustrating questions from the MIJ collector. As I've read many different guitar collector/enthusiast forums and spoken to local guitar dealers, it's clear that the layperson has little to no idea who made their badged guitar from the 1960-1980 period, also known as the MIJ golden age of guitar manufacturing. People often make the mistake of citing the American or European importer as the 'maker' of the guitar, when in fact several Japanese manufacturers were producing badged guitars out of their plants and shipping them to America and Europe to sell. Japanese manufacturers made multiple badges at the same plant, many of whom resemble each other closely. Some manufacturers merged or changed hands over the years which added to the confusion, sometime merging with another maker, only to pick up their name later. In some cases a manufacturer would farm out production to various manufacturers, making it still more difficult to know who made the guitar in your hands. Parts from other guitars would be used in the making of a particular badge for a period of time because it was all the manufacturer had to hand...which doesn't always help in identifying a maker. And sometimes, the guitar which is supposed to be an MIJ guitar is actually made elsewhere (Korea, Indonesia) because production was moved during this period in history. Sounds hopeless, right? Not always!
Gibson’s new version of the Les Paul Standard was released August 1, 2008 and features a long neck tenon, an asymmetrical neck profile to make for a comfortable neck, frets leveled by Plek machine, and locking Grover tunerswith an improved ratio of 18:1. With the 2008 model Gibson has introduced their “weight relief” chambering, which includes routing “chambers” in specific areas of the mahogany slab body as specified by Gibson R&D. Before 2008, Les Paul Standards were “swiss cheesed.” In other words, it had holes routed into the body, but it was not chambered like most of Gibson’s Les Paul lineup now is.[17]
EQ can make a tremendous difference in the sound of your instrument. This becomes especially important when playing in a band setting. Your guitar might sound great played alone, but within the sound mix of a full band may need some tweaking. Depending on which instruments are involved, you will need to adjust EQ to help your guitar fit into the overall sound the rest of the band. Using an EQ effects processor can help you dial that sound in more easily and precisely than depending on just your guitar and amp’s EQ controls.

Now, the body size isn’t the only thing to think about. There’s also whether or not there’s a cutaway, and how this is implemented. A cutaway makes it easier for you to access the higher frets, because you can place your hand right next to them. Naturally this will reduce some of the resonance because there’s less body beside the neck, but it’s a tradeoff that a great many guitarists are happy to make if they want to be able to play those higher frets well.
Fender guitars are made either in the United States or Mexico. There is a limited number of guitars being made in Japan, but those are only sold on Japanese domestic market. The difference in quality between the U.S. and Mexican Fenders is obvious but not too great. No matter which one you go for, you will get the same refined tone that made this company famous.
I wish I knew what goes on in there. I'm told it is a simple cut of the laminated neck and then the tone block is glued to the back. I hope it is that simple as I am about to perform some major surgery on my 9 ply neck to acomidate this construction technique . If any body out there can lend some advise on this , please do so I don't turn my bass into a clock!
When the Fender company invented the first widely produced electric bass guitar (the Fender Precision Bass) they also developed a bass amplifier, the Fender Bassman, first produced in 1952. This was a 26-watt tube amplifier with a single 15" speaker. In 1954, the Bassman was redesigned to use four 10" speakers. This speaker cabinet was an open-back design; as such, it had poor low-frequency efficiency and was prone to blowing speakers when used for bass because of the lack of damping. Somewhat ironically, it became very popular as an electric guitar amplifier. The circuit design also underwent repeated modifications. The "5F6A" circuit introduced in 1958 is regarded as a classic amplifier design and was copied by many other manufacturers, such as Marshall.
Paul Reed Smith Guitars SE Standard 24 is their baseline model that brings a lot of the features you can find in more expensive PRS guitars. It offers a great combination of electronics, hardware and tonewood. All at a price that makes it a bargain. If you’re looking for a neutral sounding guitar with enough punch to play whatever genre you’re into, Paul Reed Smith Guitars SE Standard 24 is worth checking out.
I have a really nice classical C-620. Got it for 50 dollars. Like new but now 40 year old wood. I went to a local store to sample what they had and to get the sound and build quality on my Lyle I had to look at name brands upwards of 500 dollars. That's where I stopped and realized I had gotten a great deal. I won't sell mine. Should last a long time. I just got a nice case for it, used, for 50. So. 100 dollars for a great guitar and case. I also got an attachable pickup.
Clipping is a non-linear process that produces frequencies not originally present in the audio signal. These frequencies can be harmonic overtones, meaning they are whole number multiples of one of the signal's original frequencies, or "inharmonic", resulting from general intermodulation distortion.[34][35][36] The same nonlinear device will produce both types of distortion, depending on the input signal. Intermodulation occurs whenever the input frequencies are not already harmonically related. For instance, playing a power chord through distortion results in intermodulation that produces new subharmonics.

{ "thumbImageID": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "defaultDisplayName": "Rogue Starter Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blue Burst", "sku": "sku:site51275425409510", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Blue-Burst-1275425409510.gc", "skuImageId": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut", "sku": "sku:site51275776901291", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Walnut-1275776901291.gc", "skuImageId": "Starter-Acoustic-Guitar-Walnut/519266000115000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pink", "sku": "sku:site51275776901306", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Pink-1275776901306.gc", "skuImageId": "Starter-Acoustic-Guitar-Pink/519266000218000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901295", "price": "49.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Black-1275776901295.gc", "skuImageId": "Starter-Acoustic-Guitar-Black/519266000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Matte Natural", "sku": "sku:site51275425409512", "price": "59.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Matte-Natural-1275425409512.gc", "skuImageId": "Starter-Acoustic-Guitar-Matte-Natural/519266000049000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red Burst", "sku": "sku:site51275776901310", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Red-Burst-1275776901310.gc", "skuImageId": "Starter-Acoustic-Guitar-Red-Burst/519266000224000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
{"id": "H99039", "skuOrProductId": "H99039", "categoryId":"site1AAG", "name":"DT520 Destroyer Series Electric Guitar", "pageUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "thumbnailUrl":"", "addToCartUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.

Since it was originally introduced in 1975, the Destroyer has become an icon of that era's chapter in rock n' roll history. Over the years it has undergone many incarnations and the perennial classic returns once again. The body and neck of both guitars are made of a tight Mahogany for maximum resonance. The bound rosewood fingerboard is adorned with Jumbo frets. The Destroyer also features Sure Grip III control knobs for no-slip control. It's not called the Destroyer for nothing.", "value":"447.99", "priceMin":"447.99", "priceMax":"699.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"3", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}

The Fender Mustang II V2 40w Guitar Amplifier Combo is an extremely versatile modelling amplifier that comes complete with 8 amp models, 37 effects, and 24 onboard factory and user presets. So, you’ve got a huge amount of different sounds to play with! It’s like having 18 amplifiers in one easy to carry box all pumping out through a powerful 1 x 12” fender Special Design speaker – great for gigs and studio use!

Phasers, also called phase shifters, duplicate the original waveform of a guitar’s output, and shift one wave out of phase with the other. They blend both waves together usually applying an oscillating circuit, resulting in the waves moving in and out of phase with each other creating spacey, “whooshing” effects. “Itchycoo Park” by the Small Faces was an early example of phase shifting in a recording. Eddie Van Halen and Queen’s Brian May often used phase effects in the 1970s and ‘80s.
I have a 12-string Lyle in really good shape. Bought as a b-day present from me back in late 1970's from a pawn shop. I need to take it to a luthier to have it set up better, but it sounds really good. Just right now the action is a little high, but not that much wear. For a long time, I put it away, finding it hard to chord as a relative newbie back then. But now, I am more than ready. It does say it was made in Korea ~ which makes it seem a little more rare. The sound is still great or maybe even better! Wish I knew what it was worth, but I hope the guy I find to set it up will know more.
Six-point rocking tremolo: This was the original rocking vibrato designed by Fender in the 1950s. Like the two-point tremolo, it is through-body, spring-loaded, and provides individual string intonation and height adjustment. Some players feel that because this type of tremolo rocks on six screws it provides greater vibration transfer to the top and hence better resonance.

I learnt to play guitar in my late teens, mainly because it was cool and the girls seemed to like hanging out with guitar players. I started off with a couple of weekly lessons with an elderly lady who managed to teach me some basic chords. After that I continued learning from friends because, imagine this, there was no internet at that time and no cool dudes who knew how to teach to play pop and rock guitar. Well, I strummed my acoustic hard and moved into playing folk and some bluegrass and had fun basking with friends on weekends and during school holidays.
Call of Duty: Black Ops III is the ultimate 3-games-in-1 experience. In Campaign mode, you must navigate the hot spots of a new Cold War to find your missing brothers. Players can play the campaign cooperatively or solo and are now always connected to the intelligence grid and their fellow operatives during battle. Multiplayer features a new momentum-based chained movement system, allowing players to fluidly move through the environment with finesse, using controlled thrust jumps, slides, and mantling. Black Ops III multiplayer also introduces the new Specialist character system, which allows players to master 9 characters' battle-hardened weapons and abilities through a challenge-based unlock progression system. No Treyarch title would be complete without its signature Zombies offering. "Shadows of Evil" has its own distinct storyline right out of the box, set in the fictional 1940s Morg City, where four particularly troubled individuals — the femme fatale, the magician, the detective, and the boxer — star in this film-noir inspired horror story.
1928 to 1967: Tortoise grain celluloid pickguards glued directly to the top, clear finish then applied over top and pickguard. Due to extreme shrinkage of celluloid and lacquer, this often causes a "pickguard crack" in the top. Pickguards became "standard" in 1931 on most models, but some martin guitars had them as early as 1928. The OM series was the first model to consistently have a pickguard in 1930.
Remember that each cited Mark has many different models, some better than others. Above all, the definition of how good a brand or model will depend on the personal taste of its user. When it comes to music, there is a lot of controversy and discussion about what are the best tone, the best touch, and the most beautiful design, ultimately the perception of each person is different. We try here only give direction for those seeking to know good guitar brands. This list is not intended to be exclusive or limiting. Of course, the amount you are willing to pay too much regard to the definition of the right guitar. Soon we will be adding this list marks a bit cheaper and cost-effective. If you think we missed any brand that deserved appear here in the list, send your suggestion to
I see some people using an A/B box straight from their guitar and then I suppose into two separate chains for 2 separate this a preferred method? I use my mormorley ab at the end and share my chain with both amps. Vox AC4-Marshall DSL...I have been contemplating running two separate chains...I'm fairly new to effects so I've just been toying around. Currently this my chain Guitar-Fulltone OCD-MetalPedals Dirty B*tch-Mesa Throttle Box- MXR 6 band EQ- EHX Small Clone-EHX Small Stone- Catalinbread Montavillian Echo- Visual Sounds Delay- TC Electronic Trinity 2 Reverb- Morley A/B/Y to Amps
After being branched into ESP-LTD designs, the company made its signature guitars accessible to the masses. This was done by launching these guitars with the affordable price range. The design of ESP-LTD guitars is quite similar to the typical ESP designs like the Eclipse. Its ESP-LTD EC-1000 is a fantastic guitar model for rock, with high-quality features. In fact, if you are looking for something that could substitute the Les Paul guitar, EC-1000 will be the right choice.
Description: Guitar Type: Bass - Bass Type: Electric Solid Body - Body: Alder - Top Wood: Maple - Flamed - Neck Wood: Maple - Neck Attachment: Bolt - Neck Construction: 3 Piece - Nut Width: 54mm - Fingerboard: Rosewood - Frets: 24, Medium - Inlay: Abalone - # of Strings: 6 - Scale Length: 34" (86cm) - Headstock: 3+3 - Bridge: Mono-Rail IV - Cutaway: Double - Hardware: Black - Circuit Type: Active - Pickups: Bartolini Humbucker - EQ/Preamp: 3 Band - String Instrument Finish: Amber
From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.
Most newbie guitarists want a small amp that sounds good but doesn’t cost too much. The amps listed above are that and more. However, there are some guitar players who mean business from the beginning, and won’t want to waste time on small beginner amps when they have the resources and ambition to grab an intermediate or pro-level amp. If you know you are going to stick with playing guitar, and if you can justify it in your budget, that’s not a bad idea.
Palmer is a Miami, FL based guitar maker. They have high end models made in the states and cheap models contracted out to the highest bidder like most guitar maker today. I would say that if you tried to sell one of these, you would most likely not get what you paid for it new because they are simply made cheaply in huge numbers. They eventually turn up at used music shops and garage sales around the country. I wouldn't pay more than $50 for one myself and did just that. They make good campfire guitars.
I have 2 Kent guitars. One like a Strat and one 12 string hollow body. I know they were made in the 60s and were distributed by Kent Musical Products. Address:5 Union Square, New York. 10003. And they were a subsidiary of Buegeleisen & Jacobson, Inc. Any further info on these would be appreciated. Most sold in the price range of 100 dollars and up.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 55mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 8 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Fixed - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: IBZ-8 - Pickup Configuration: H-H - String Instrument Finish: Black, White

Don’t feel like you have to spend a fortune either. While there are some very pricey boutique pedals on the market that get outstanding reviews, there are also affordable pedals that will do the job just fine. Consider brands like Boss, DOD and MXR for some great pedals at affordable prices. If you end up with a pedal you don’t like as much as you thought you would, you can always trade it in and get something different.

When two or more speakers are used in the same cabinet, or when two cabinets are used together, the speakers can be wired in parallel or in series, or in a combination of the two (e.g., two 2x10" cabinets, with the two speakers wired in series, can be connected together in parallel). Whether speakers are wired in parallel or in series affects the impedance of the system. Two 8 ohm speakers wired in parallel have 4 ohm impedance. Guitarists who connect multiple cabinets to an amplifier must consider the amp's minimum impedance. Parallel vs. series also affects tone and sound. Speakers wired in parallel slightly dampen[s] and restrain[s] them, giving what some describe as "tighter response" and "smoother breakup". Some describe speakers wired in series (usually no more than two) as sounding "...looser, giving a slightly more raw, open and edgy sound."[26]
Over the years, Muddy has famously criticized EM, but around the time of its release, he seemed to have a different attitude. Blues fans claim he always hated it but the following proves otherwise. Six months after EM, the same line-up reassembled and recorded a sequel called After The Rain (1969) that still has distortion on it but isn't as overtly psychedelic. If Muddy hadn't liked EM, he would have had enough say at Chess to dismiss a follow-up, but instead he went along with it. In fact, Pete Cosey says "I'll never forget as soon as I walked into the studio for the follow-up and Muddy saw me he threw his arms around me and said ‘Hey, how you doing, boy, play some of that stuff you played on the last album." After The Rain's songs alternate between Chicago blues and distorted guitar tracks. There's a marked difference on After The Rain with Paul Oscher (harmonica) and Otis Spann (piano) from Muddy's old band joining in and Muddy playing lead guitar on several tracks. On the Chicago blues tracks, more prominent bass and drums put the music into a rock setting, but it's Muddy's slide guitar playing that highlights them. Muddy really let's loose with some striking, tenseful slide work on tracks like "Honey Bee," "Rollin and Tumblin" and "Blues and Trouble" that just send a chill through your bones. On the other side of the album, the guitar on "Ramblin Mind" lashes and cries out in dense fuzz while on "Bottom of the Sea," the fuzzy leads seem to hang in the air along with an innovative bowed bass and harmonious organ in the background (the bowed bass is also used on the record on "I am The Blues").

If you're anything like me, you started out with a basic beginner's guitar, and over time you realized that you were ready for something better. I had a Squier Telecaster(standard series) and I was ready for a change. I was set on a Les Paul of some sort, possibly a used LP Standard. I read tons of reviews, then I started reading some of the Epi Les Pauls(the nicer ones, $400-500).
Then, one weekend his combo got the biggest gig of its career – opening for Tommy Dorsey and his orchestra. Charlie was hot that night, and Dorsey took notice. In one of those rare coincidences, Dorsey’s guitar player had just quit, and the next day Kaman was offered the job. Which path does the son of a construction foreman pursue? The uncertain, fleeting glory of the entertainment industry, or the unknown possibilities of putting craft in the air?
If you think not using any pedals makes you more “real” or “natural” of a player, you’ve got to be kidding me. Let’s think about what is physically happening when we play electric guitar. The sound is created when a guitar string is plucked by a pick, likely made from some polymer (oh wait, the “real” guys use their thumb, okay) causing it to vibrate. This vibration also creates a corresponding vibration through a magnetic field above your pickups. The pickup converts this into electric current, which passes through a simple low-pass filter tone circuit and a passive volume attenuator (we presume you’re not using an active pickup, being that you’re keeping it “real”) that does some equalization before it even gets to the cable. The standard cable consists of stranded, >99% oxygen free copper wire usually measuring between 18-24 gauge thickness, creating another filter in conjunction with the guitar circuitry based on cable capacitance.

Many recordings feature multiple guitar tracks playing simultaneously, but sometimes this can clutter up the mix. Another approach is to make each part sound distinctive by using different combinations of guitars, amps and effects. Panning the guitars to various areas of the stereo spectrum will create space for each part, while subtle use of ambient effects can create a sense of depth. EQ can be used to help guitars blend together. Try cutting certain frequencies from one guitar track and boosting those same frequencies in another.
The benefit of a compressor lies in that every note played will be at nearly the same amplitude, and therefore nearly equal in volume. This will help normalize tones that are sometimes lost in the mix because of complex overtones, and it will result in a more articulate sound. Notice that if you don’t pick all notes of an arpeggio at exactly the same pressure you will likely get a different sound for each note, especially if you are playing a tube amp. Tube amplifiers react dynamically to stronger and weaker signals it’s the allure of them and thus the non-uniformity of picking at different strengths will be exaggerated. A compressor will fix this problem and normalize all notes of the arpeggio regardless of the player’s technique and equipment, which is consequently why many soloists prefer them.
Delay is essentially echo, but it can be so much more when used well. The two most important knobs are “time” and “repeats”. Time will increase the length between repeats, and repeats will adjust how many echoes are heard. While it is tempting to max the repeats and enter space rock land, less can be more. Used gently you can get reverb or slap-back rockabilly sounds. With careful knob setting you can even create harmonies and loops like The Edge.
:I need to know how to get parts for my old kent guitar.I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.

The Yamaha's FG series FGX800C is a perfectly machined instrument. If there is one thing Yamaha is known for, it's the quality of their mass-produced acoustic guitars, which people like to pooh-pooh due to the romanticization of extremely expensive handmade guitars. Yamaha has perfected this machining process to a point where you wouldn't really be able to figure out if the instrument was put together by a luthier or if it was made on a factory floor somewhere. This is the case with nearly every accessible guitar these days thanks to machines reducing errors and driving prices down.
Essentially the 28s looked very similar to the E/EM/EB-18s. They had the same offset double cutaway body outline and the modified Viennese three-and-three headstock. Instead of maple laminate bodies with glued-in necks, the 28s had mahogany bodies and necks in a neck-through-body design. The basically slab bodies of the E-18 had gained a carved top, with a deep contour in the upper waist. The brass nut had become a Micarta nut. Fingerboards were now ebony. Finishes were sunburst.
The pitch shifter effect can also be used to detune or “capo” a guitar without the need to actually retune the instrument.  These detuning type pedals have become prominent in the age of dropped tunings and seven string guitars.  The Digitech Whammy Pedal is the most widely known pitch shifter for guitarists and has been used by players like Jonny Greenwood of Radiohead and Tom Morello of Rage Against the Machine fame.

Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce and Cedar as the key to getting the desired tone from a guitar. Indeed, many beginning builders agonize over wood choice combinations as they relate to tone, with more experienced craftspeople offering suggestions that seem to assure the correct … [Read More...]
Taylor 214ce A ‘best acoustic guitar’ list would be incomplete without a Taylor in it. This Grand Auditorium guitar with a cutaway from Taylor projects plenty of volume and has a bright and defined tone that many fingerstyle players love. If you’ve always wanted a Taylor, this one with a solid top will surely stick with you for many years to come.
Clean or replace jacks. To clean jacks use solvents such as contact cleaner or other solvents as a spray and spray the metal parts, clean any excess solvent with a rag. To replace jacks first obtain a similar one that complies with your guitar, then soldering in properly. Work in well-ventilated space to avoid harmful fumes from solder or solvents.
This is a very cool goldtop Vox SDC 33. Ultra slim body and neck makes playing extremely smooth and comfortable. Coaxe pickups provide a unique array of tones. Has some natural wear from normal use, like the buckle rash and a chip on the neck finish shown in the pictures. Overall a very clean and well playing guitar with a unique look and sound. Contact us with any questions! Thanks, Fondren Guitars
The Fender Super-Champ X2 HD is a true champion when it comes to versatility and quality, combining old school tube technology with modern amp voicing and digital effects, all in a compact and portable 15W amplifier head. With a single 12AX7 preamp tube and two 6V6 power amp tubes, you can't lump this amp with conventional amp modelers, but you also can't group it with traditional tube amps because it does let you choose from 16 amp voicings that cover everything from clean Tweed tones to high-gain metal. In addition, the amp comes with 15 effects that include variations of reverb, tremolo, modulation and delay. With its low watt rating, the Super-Champ X2 HD is ideal for practice and recording, while being loud and portable enough for small venue gigs. Finally all these features are made available in a compact and more importantly - affordable package.
Harmony pedals are often used to generate vocal harmonies, but can also do wonders for bass and guitar sounds. Some vocal harmony processors use the signal from your guitar to create two- or three-part vocal harmonies. Most harmony effects let you specify precisely how much higher or lower you want the accompanying note to be. Modern artists such as Steve Vai and Robert Fripp have created interesting music using a purely pitch-shifted signal with none of the original signal mixed in.

A hard-tail guitar bridge anchors the strings at or directly behind the bridge and is fastened securely to the top of the instrument.[20] These are common on carved-top guitars, such as the Gibson Les Paul and the Paul Reed Smith models, and on slab-body guitars, such as the Music Man Albert Lee and Fender guitars that are not equipped with a vibrato arm.