The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
Woods typically used in solid-body electric guitars include alder (brighter, but well rounded), swamp ash (similar to alder, but with more pronounced highs and lows), mahogany (dark, bassy, warm), poplar (similar to alder), and basswood (very neutral).[19] Maple, a very bright tonewood,[19] is also a popular body wood, but is very heavy. For this reason it is often placed as a "cap" on a guitar made primarily of another wood. Cheaper guitars are often made of cheaper woods, such as plywood, pine or agathis—not true hardwoods—which can affect durability and tone. Though most guitars are made of wood, any material may be used. Materials such as plastic, metal, and even cardboard have been used in some instruments.
Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally.

One problem with adding a tweeter to a bass speaker cabinet is that the tweeter may be damaged by the overdriven amplifier tone that is popular in some musical genres, since overdriving the amplifier adds a great deal of high frequency information to the signal. Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets produced by manufacturers such as Gallien-Krueger and Carvin and other manufacturers allow bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn, which prevents this problem. Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
The Dunlop Cry Baby is a classic example of a great wah pedal. This pedal adds a ton of texture and nuance to guitar solos, and can also be used to create some very funky ‘70s-ish effects. A wah is essentially a controllable frequency filter. By manipulating the pedal you can change your tone from treble to bass and anywhere in between. This control is part of what makes the wah effect so popular.
I played a gig (to an empty house) at The Haunt in Ithaca NY. A lot of up and coming regional bands play there. We, on the other hand are just a cover band from Binghamton, about an hour away. While setting up, the sound man left a mic on the floor where I’d be setting up. I let him know that I send a direct signal. I could tell he wasn’t happy. After the gig though, he came and complimented me on my sound, saying that he didn’t expect a direct sound to be that good.
Over a decade after putting down the guitar I was inspired to take it up again. I got this bundle since it includes all the essentials. HOLY COW!!! WHAT A GREAT DEAL THIS BUNDLE IS!!! First, the guitar itself is a beautiful, quality instrument. It's a solid top guitar with good sound, and a comfortable action and neck. It was easy to tune and is a tremedous value for an "entry level" guitar. Second, the case. There are better cases available but there are certainly alot of worse cases out there. Bottom line on the case, it's a $90 case by itself and you get it for less than $40 here. A great value if you ask me. Third, the tuner. It works, it's easy to use, that's all you really need right? Everything else is good.
In the ’80s, with the advent of new digital effects units, the “refrigerator racks” appeared on the scene—custom rigs built for the studio and touring pros of the day. Effects loops in guitar amps also became commonplace—allowing guitarists to insert line-level effects after the distortion generating preamp stages of their amps, and before the power amp stage—a big tonal improvement when using time-based effects like delay and reverb.

There were actually two bolt-neck DT-250s, both with basswood bodies and the very nice locking Powerocker vibratos. The regular model came in black or white and had a rosewood fingerboard. Well, a little boring. But the Transparent Red TRs came with a maple fingerboard stained red. Yes, that’s what we’re talking about! If you’re going to have a red guitar, you ought to have a matching red fingerboard. Hard maple, made slick with the red polyurethane.
Though the line between the two is easily smudged, where multi-effects processors create a broad spectrum of effects, modeling processors can recreate the sound of particular instruments and amplifiers, like a Gibson Les Paul played through a stack of Marshall amplifiers, or a Fender Stratocaster played through a Fender Deluxe Reverb amplifier. A modeling processor offers you the ability to make your guitar and amp combination sound like whatever guitar and amplifier sound you want—even if you don’t own either guitar or amplifier. You are limited only by the number of models programmed into the modeling processor when you plug your guitar into one.
Description: Body: Mahogany - Top Wood: Maple - Curly - Neck Wood: Mahogany - Fingerboard: Ebony - Binding: Natural - Frets: 24, Medium - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge Construction: Ebony - Cutaway: Double - Hardware: Gold, Nickel, 2x Volume Control, 2x Tone Control, 3-Way Switch, Waverly Tuners - Pickups: Fralin P-90 - String Instrument Finish: Golden Natural, Winter Solstice, Hickory Burst, Aged Scotch, Faded Onyx - Made In: America
Originally, the Californian brand created by Randall Smith in 1969 used to offer Fender mods, just like Marshall, to give the amps more gain or, in other words, more distortion. And they managed to seduce Carlos Santana and Keith Richards. The Mark series was the brand's flagship until the introduction of the Rectifier series whose name refers to their current rectifying technology (a rectifier converts AC to DC). Mesa Boogie is certainly the best-known brand after Fender and Marshall. It is still the reference among metal musicians, especially thanks to bands like Metallica and Dream Theater who tend to use Mesa products on stage and in the studio. More recently, Mesa Boogie introduced the Atlantic series that includes the TransAtlantic TA-15 and TA-30. These two amps reflect the manufacturer's interest in the "lunchbox" market.
Delay pedals are among the most popular effects around, and the reason is simple: A delay pedal not only gives your sound a professional sheen and adds a three-dimensional quality—even when set for a discreet, atmospheric effect—but it can also produce a wide variety of not-so-subtle sounds and textures, ranging from ear-twisting rhythmic repeats (à la Eddie Van Halen’s “Cathedral”) to faux twin-guitar harmonies and live looping.
The first trick I will show you is very simple: you only need to add a bit of distortion to the signal so that the bass line stands out from the mix without making it too heavy. To achieve that, and as awkward as it seems, guitar pedals seem to be more fitting than bass pedals, at least for recording and with this particular technique. Indeed, "crunchy" guitar distortion pedals are usually pretty "poor" in the low end of the frequency spectrum, which makes it easier to mix the distorted signal with the original one. In the following example I used the famous Ibanez Tube Screamer:
Ibanez Mikro GIO Electric Guitar in Black w/ Bag. The guitar is in good working condition does have few marks and one nick. Does not include stand just used to take pictures. Includes guitar strap and Ibanez bag. Please contact me if you have any problems with your purchased item and I would be Happy work with you to help make your Transaction a Pleasant Experience.           Please check photos carefully and use the enlarging tool. Some photos are taken with a flash and may cause the image to appear darker in some areas. Photos are an important part of the description and the condition of each item.Thanks for Looking!!           Also please verify the correct shipping address before bidding. Payment is expected within 48 hours.    
We think this entry-level multi effects pedal is a perfect fit for beginner guitarists due to the simple layout and the fact you have three extremely useful effects at your disposal. You have individual overdrive, distortion and delay effects circuits as well as a built-in, footswitch activated tuner within this budget friendly multi effects pedal – basically all your bread-and-butter effects that will allow you to sculpt some seriously great sounds.

Up for sale, a 1961 Fender Super in excellent condition and in perfect working order. And of course this is the most compact Brownface-era amp to feature the "Harmonic Vibrato" circuit. The circuit has just been thoroughly tested by our techs here at Mike & Mike's Guitar Bar and almost all of the original blue Ajax capacitors in the preamp are intact.

As a trained engineer I just don’t see how contemporary luthiers would be able to control only these three parameters in combination in order to make up a specific tone. There is simply no connection between these and the sonic impact they have–again, in combination. Did anyone ever change the shape due to the wood he uses? For instance wood would be lighter by 5%, stiffer by 8% (which would be very much, by the way, but it happens all the time even with the same species) so consequentially make the horn less thick by 3% and trim the tail by 5 mm. A rule like that would be plausible in case wood would affect the tone that much. But luthiers never do. Thy do not even take care of weight and stiffness.
The 1934-’35 Dobro amplifier was a square cabinet covered in imitation leather with a leather suitcase handle, the eight corners protected by metal bumper guards. The grill was curiously covered with a down-sized version of a Dobro resonator plate cover, probably made by Rickenbacker. It had back-mounted controls, five tubes (5Z3 rectifier, 56 and 79 preamps, and two 2A3 power outputs) and a 12″ Utah speaker. This amp was built for Dobro, with the cabinet coming from Bulwin of Los Angeles and the chassis coming from Webster of Racine, Wisconsin.

For our example pedal board, we’ll pick the ST-2 Power Stack. Another category with many choices is modulation.These are effects like flanger, phaser, chorus, tremolo, and others. Let’s use the most versatile of these—the BF-3 Flanger. Another group is ambience effects, such as delays and reverbs. We’ll use one of each: a DD-7 Digital Delay and the FRV-1 ’63 Fender Reverb. There are some pedal effects that can add notes or alter the pitch of what you’re playing. For want of a more esoteric name, we’ll call these “pitch-altering” pedals. From this category, let’s throw in a BOSS OC-3 Octave.
Here we have another very Beautiful and rare "The Aria Model" Vintage Japanese F style Mandolin with such amazing tone!!! nearing 40 years old these are AMAZING! This is the rare " The Aria" Model M700 as seen on the Classic inlay in the headstocks Gorgeous Brazilian Rosewood veneer is a super beautiful Japanese example of the highly revered F style mandolin made famous by Gibson. These older models were put out during the 1970s this example was 1973. These premium examples have become so popular with Players & Collectors over the past several years now. The inlays on the neck and headstock and the classic violin sunburst on this model are simply gorgeous! The top is solid tight grained old growth Sitka spruce and the back & sides are premium AAA figured & flamed maple, the neck is Mahogany This particular M 700 is in very good condition with some minimal wear from playing please refer to the pics for those details. The original case and pick guard are also still present and do come with this fine instrument the guard is simply off for now. With the resurgence in popularity of Bluegrass and other music styles utilizing the wonderful Mandolin sound in recordings and live performances these rare Gibson Replicas vintage mandolins have been steadily increasing in popularity and in value because players are catching onto the great old high end vintage Japanese instruments now so the demand has risen accordingly. If you're looking for a great Vintage Mandolin that is extremely well made with top craftsmanship utilizing top the grade AAA woods that have now aged and have a wonderful vintage patina to them these are the affordable Japanese vintage F Mandolin alternative choice to a $5000.00 - $10,000 vintage Gibson F-5 ..thats why many Pros today are seeking the best vintage for a great deal. This Old Aria M700 is simply a great one!.
This years new Guitar World Magazine Holiday Buyers Guide issue is full of great gear for the upcoming holiday season. The amazing new FU-Tone Design Your Own & the Titanium Bridges are featured and well worth checking out. Make sure you pickup a copy of the new Buyers Guide on news stands today and all of the beautiful women photographed don't hurt either!
I have a shecter omen extreme 7 and found that the factor strings they put on were nice for my small fingers. I had to replace because the factor set in general needed some tweaking and they changed all the strings. Now i don't really like the strings they put on. Too small. All they had listed for the strings were 24X jumbo strings. What string set should i buy since i play Ambient, soft, but also djent metal.
For practice, tone, playback and recording the Cube series is hard to beat. Integrates with iDevices for playing along with music and gives you all the effects and amp sounds you need in one place. The Roland CUBE-10GX Guitar Amplifier Combo is super lightweight and compact making it a great practice amp for home or studio use. If you're in need of a bass amp, the Roland Cube 20XL Bass Guitar Amplifier is a great solution too.

From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.
Now I know the image above will give some people fits. Just the idea of doing a gig without your favorite amp roaring behind you is enough to send people to their sheds, grabbing pitchforks and lighting torches. This article is about why some guitarists choose to go direct at gigs. Going direct doesn’t replace the traditional guitar/pedals/amp formula that has powered popular music for over 60 years. Bass players and acoustic guitarists have gone direct for years, and technology is catching up to the ears of electric guitarists. Of course, no one is trying to tell every guitarist to do this, but it does seem to have merit in certain situations. Those situations are exactly what we will be talking about here. 
Hertz Guitar company was originated from Shanghai/China & North Korea. This brand of guitars produces electric and other wide range of guitars that can be used in studio recordings and live shows. This brand also manufactures guitar accessories. The starting price of guitar from this brand is 12,504 INR approximately. Anyone looking for an affordable electric guitar at a beginner and advanced level can buy this brand of guitar.
Danelectro's new '59XT guitar was an exciting announcement at NAMM 2018, and we're stoked to have a chance to test out this sharp-looking axe. Control-wise, the guitar keeps it simple, with a three-way pickup selector switch stacked above tone and volume control knobs, but it ups the game with a Wilkinson tremolo and a lipstick pickup. Watch along as Andy tests out the Dano's sound, and look below for more information about how to get one of your very own.

“Ceramic is a much more powerful magnet again [than Alnico V]. The bass and treble get boosted significantly. A lot of people think ceramic magnets scoop the mids out, but when you analyse it you find the mids tend to stay where they are – it’s just that the bass and treble get boosted so much you get a V-shaped taper in the EQ. Ceramic pickups tend to suit players who need a very fast and percussive pick attack.”
Fender got really good at producing affordable high quality electric guitars thanks to the Squire brand, and with the T-Bucket 300CE they are trying to achieve the same thing in the acoustic electric world. This is an instrument that features superb electronics and offers great potential, and if it is in the hands of a professional it sounds better than any other guitar on this list.
when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier.  

Clapton is good… not gonna argue that he is an amazing guitarist… but no where near the best guitarist of all time…. Satriani can play ANY clapton riff, solo, song, chord progression, whatever.. Clapton can’t come close to playing any of Joe’s stuff. And most of Claptons best songs are JJ Cale tunes. Cocaine, Layla, After Midnight, etc,…. etc…. Oh and Clapton put out a whole album dedicated to Robert Johnson and admitted that most of the songs are redone and reworked because “the man” Clapton couldn’t play em anywhere near as well as Mr. Johnson.
Cool guitar! And you’re right— most Harmony guitars aren’t worth much, or in other words, they aren’t very collectible. That said, I wonder how many guitarists reading this column started out learning to play on a Harmony. There are hundreds of thousands of Harmony guitars out there, and though these are mostly entry-level instruments, they’re very much a part of guitar history.
Named using Jim Marshall’s initials and numbers from his car's license plate, the Marshall JCM800 debuted in 1981. With the newly introduced Master Volume feature, the JCM800 allowed for crunchy, sizzling distortion at low output levels, making it the amplifier of choice for heaps of hard rock and metal players, including Slayer’s Kerry King and Jeff Hanneman and Slash of Guns N’ Roses. The JCM800’s popularity carried on beyond the Eighties, becoming a favorite of Fugazi’s Ian Mackaye and Tom Morello of Rage Against the Machine.
FRET LEVELING ("Filing", "Dressing"...) $150.00 Worn or uneven frets can he filed level in many cases, if there will remain enough height on the fret to suit the customer (and practical playability). Frets must be lowered to the height of the lowest pit that can be found. Sometimes, replacing the most worn frets is appropriate. Includes "set up" adjustments.
Speakers and speaker stacks are a necessary partner for standalone amplifier heads. Take the total power level into account when you're looking at speakers, ensuring you're getting a stack with the muscle you need for the venues you play. Speaker configuration is also important, with larger woofers delivering more powerful bass and smaller tweeters bringing through the high-end.
Every guitar player has their own distinctive sound, and many guitar companies have created artist and signature electric guitar models that were inspired by and/or designed in collaboration with the very best guitar players from the past and the present. Some of the most popular signature electric guitar models we offer here at Sam Ash are the Eric Clapton Strat guitars from both Fender and the Fender Custom Shop, ESP Kirk Hammett guitars, John Petrucci guitars from both Ernie Ball Music Man and Sterling by Music Man, and many more!