The Fender Squier Bullet Stratocaster is one of the most popular low budget electric guitars on the market. For what money can buy around this price, it’s good value. The quality of the hardware, tuners and pickups can’t go up against the original Fender Stratocaster, but it still sounds really nice and feels good for playing, practicing and some first gigs. A perfect entry-level guitar that is worth the investment.
bought at a tiny store in holland, back then they said to me the guiter was already 20 years old. he was looking a new, and bought it for 1000,- dutch guildens. thats maybe...445,- euro now. thats nothing compared to the prices they ask for a vox guitar they make TODAY! thay are building guitars again and ask pricies beginning by: 2000,- euro's. I wanna know when my guitar was bild, he has a chrome plate at the back with made by japan on it too.
Fender’s open-back combo tube amps have been used on countless hit records in practically every genre of music in the past half-century. They can deliver both warm bell-like clean tones and gritty overdriven snarls. The Blue Junior III is a relatively inexpensive way to get into Fender tube amps, and it’s the perfect size for studio and small venues.
That's right. It's neck first, then bridge height, then intonation (at least the way I do it). Nut height can be taken out of the equation by putting a capo on the first fret, so it can be sorted out later if there are any problems with it. Of course if you were to put a capo on the first fret, you'd need to compare that with the 13th fret when setting up the intonation.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: lyle","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
SOLD OUT! Takamine EF406 RARE Here we have a RARE and GORGEOUS 1999 limited Edition Takamine acoustic-electric guitar, model EF-406. This instrument is a PREMIUM example of a New York or also called a Parlor guitar and is a Hand Crafted in Japan model an amazing example of Japans high Quality workmanship & fit & finish and is truly just as good as it gets. As you can see from the pictures, it is simply gorgeous to look at. It has a classic slotted headstock with Top Quality gold open gears and gold tuners with Pearl buttons. The Top- Back & sides are all a High grade choice AAAA FLAMED KOA with natural Koa color (there is no stain)and none was needed to bring out the AWESOME grain patterns of this Rare Native Hawaiian Wood. The top sound hole apears to be bound or painted and inside looks same as out /all Takamine internet information leeds to say the tops on this model is solid however we can not guarantee this as fact. The electronics are a GRAPH-EX pre-amp system: peizo transducer, with "exciter," volume, bass, treble, and mid controls. It comes with a deluxe, plush hardh shell case, note: In he picture close up of the ack of the headstock you may notice a dull spot running threw the center over the made in Japan tag area this is just a spot of waxed area that was inadvertently missed and not rubbed out... it is fine this guitar is in Excellent used condition. .
The 2008 Les Paul Standard sports a revolutionary enlarged neck tenon designed by Gibson’s team of pioneering engineers. The expanded neck tenon features an innovative interlocking joint that allows the neck to be dropped into the body from the guitar’s top side, as opposed to sliding the neck in from the rim. When the glue is added, a solid unyielding bond is created that maximizes the wood to wood contact between the neck and the body, offering increased stability and superb transfer of vibration for enhanced tone, improved sustain, and superior resonance. It is also the largest neck tenon in the history of the Les Paul.
Good point Gary. The T5 is in a separate category. I found it to be useless as a true acoustic. Thin, weak tone due to its shallow body. Plugged in as an amped acoustic just so-so, and as an electric for rock with overdrive or distortion, pretty good. The Ovations with deep contour bowls, like my Elite 2078, while not so easy to hold, are better at everything, especially unplugged tone, and cost half as much.
Melodious tuning powerful pickups and with supreme body ESP is also famous for its affordable prices. This brand is famous for its quality and best for the lovers of Electronic Guitar lovers. The Japanese company was founded in Tokyo Japan in 1975.it manufactures some best  brands like  “ESP Standard”, “ESP Custom Shop”, “LTD Guitars and Basses”, “Navigator”, “Edwards Guitar and Basses” and “Grassroots”.
Like the Les Paul, the SG guitar models has an iconic status and it is another guitar coming from Gibson that has been passed-on to Epiphone to cater a wider audience because it carries a much friendlier price. This SG Special has the famous devilish cutaway body made from mahogany and has a bolt-on okoume neck with a comfortable to play slim tapered D-profile having 22 frets.
There are many varieties of speaker combinations used in guitar speaker cabinets, including one 12" speaker, one 15" speaker (this is more common for bass amplifiers than for electric guitar cabinets), two 10" speakers, four 10" speakers, four 12" speakers, or eight 10" speakers. Less commonly, guitar cabinets may contain different sizes of speaker in the same cabinet. Cabinets with eight 10" speakers are large and heavy, and they are often equipped with wheels and a "towel bar"-style handle for transport. Some cabinets use mixed speaker types, such as one 15" speaker and two 10" speakers.

The most common route for absolute beginners will likely be a good, old fashioned guitar instruction book. We’ve all seen at least one of these kicking around. They tend to have a guitar and some interesting 80s-inspired graphics emblazoned on the front. The typical format is either an encyclopedia of scales and chords (indeed, some on this list follow that formula), or a series of songs broken down into digestible theory tidbits often accompanied by an ancient information vessel known as a Compact Disc.
This site aims to be a reference point for guitar players and guitar collectors. There's information, history, photographs and sound clips of many famous, and not so famous guitars and basses by makes such as Danelectro, Epiphone, Fender, Gibson, Guild, Gretsch, Hagstrom, Harmony, Hofner, Rickenbacker and Vox. There is a section on effects pedals too!
This style of volume effect rhythmically reduces and swells the volume of the signal in a regular cyclic fashion.  Often heard in Country and Western type guitar tracks, tremolo was commonly built into older amplifiers and is one of the earliest recorded effects.  The speed and depth of the effect is controlled on the pedal by way of one or two potentiometers.  When set to the tempo of a song, the player can produce an extra layer of rhythm on top of what is being played.
It’s ironic that Leo Fender, the creator of the most influential instrument in rock music, wasn’t actually a fan of rock ’n’ roll; he preferred country and western. But it goes to show you that once something new is out there, you can’t stop makers and players from reinventing it, adapting it for new purposes, taking it apart and putting it back together in new ways. The electric guitar is a prime example of unintended consequences. Initially, it just wanted to be a bit louder, but it ended up taking over and reinventing popular music and culture. Will we even recognize the sound of the electric guitar 10 or 20 years from now? I, for one, hope not.
Another +1 for shreddage. I have the PRS version and was trying it out through BIAS and TH3 the other day. Had an absolute ball, and was able to achieve somewhat realistic results with very little effort. I also love pretty much everything I have from Amplesound, though results through effects engines can be hit and miss. Their Taylor acoustic is lovely if that's what you're looking for. I've not found a really fantastic strum engine/option yet but then I will fully admit I haven't put the time into mastering what I already have in that department. I have heard demos using the guitar VIs that I have that do sound convincing so it is possible though maybe not easy.
So many new guitarists, and even not so new guitarists, play with the volume and tone knobs turned all the way up all the time and then shell out lots of money for pedals when they are not satisfied with their tone before taking advantage of what the guitar can do (and it's a lot). Then of course, your amp's tone controls can refine things even more.

The entry point for guitar pedal self-assembly is the effects pedal kit. A lot of the work such as designing and manufacturing the circuit board, drilling the enclosure, and selecting suitable parts has already been done for you. With a little care and careful following of the instructions, there’s no reason not to have a first time success with a pedal kit.
The Octavia was created by Roger Mayer for Jimi Hendrix in 1967. It’s musical debut can be heard on “Purple Haze” on the Are You Experienced record. One of the many ground breaking sounds on this recording. The pedal produces a doubling effect an octave above the fundamental note. The octave is similar to a ring modulator in that it is kind of dirty and strange sounding.
With this modification, you will not get any parallel sounds which are so typical of the "Fender sound". (For example, "Sultans of Swing" is played with the middle and bridge pickups in parallel). The pickups in series gives you a fuller sound with much higher output, which is good for distortion. If you want a more versatile modification, go to the Wolf Wire™ Modification which will give you series choices, parallel, single coil, and out of phase options.

The guitar's contribution to the sound comes from its mechanical construction, including the type of wood used, and the pickup system fitted. The hugely popular Fender Stratocaster uses simple single-coil pickups, which tend to give it a bright, articulate sound that doesn't take up too much room in a mix. Guitars with humbucking pickups, on the other hand, tend to have a thicker, more solid sound that can overpower other guitar parts or other mid-range instrument sounds. Tonal qualities aside, humbuckers by their very nature are designed to reject electromagnetic interference, while single-coil pickups are very susceptible to it. Specialist stacked humbuckers, such as those made by Kinman, Dimarzio, Fender and others, are available for use where something close to the original tonality is desired but without the noise problems, and for serious studio work these are a good option. Note that CRT computer monitors emit a lot of electromagnetic radiation from their scan coils, so a flat-screen LCD display is always an advantage if you need to record guitar into a computer system.
We received a quote so promptly and after already seeing so many other rates in the DFW area, I knew instantly that this was the best value. My 8 year old son is shy and even though he was super interested in learning how to play the guitar, I worried that he’d have a hard time connecting with whoever we chose. After about 5 minutes into the lesson, that fear was long gone. Jack was awesome with him and very patient. He showed up right on time which was great because any parent knows that adding one more thing to an already busy schedule isn’t always the easiest thing to do. Great experience so far!
Artwork: George Beauchamp's original "frying-pan" electric guitar design from 1934. On the right, you can see a top view of the guitar with the pickup unit shown in dark blue and the pickup coil (green) sitting underneath the six strings (shown in orange). On the left, there's an end-on, cross-section of the pickup unit (looking down from the head of the guitar toward the bridge). You can see that Beauchamp has used a pair of horseshoe magnets, with their north poles (red) and south poles (blue) aligned and the strings threading between them. The pickup sits between the magnets under the strings. From US Patent 2,089,171: Electrical Stringed Musical Instrument by George Beauchamp (filed June 2, 1934, issued August 10, 1937). Artwork courtesy of US Patent and Trademark Office.

Schecter Keith Merrow KM7 MKIII Electric Guitar, 7-String   New from$1,699.00In Stockor 12 payments of $141.59 FREE 2-DAY SHIPPING Epiphone Limited Edition Matt Heafy Les Paul Custom-7 Electric Guitar, 7-String   New from$949.00In Stockor 12 payments of $79.09 FREE 2-DAY SHIPPING ESP LTD SCT-607B Stephen Carpenter Baritone Electric Guitar, 7-String   New from$1,099.00In Stockor 12 payments of $91.59 FREE 2-DAY SHIPPING Ibanez FRIX7FEAH Iron Label Electric Guitar   New from$899.99Only 2 Left!or 12 payments of $75 Free Ground Shipping See All Electric Guitars: 7-String
 How to Order Custom Guitar: THIS IS A PRE-BUILD PRICING. You will receive the custom guitar exactly as pictured. Please make sure to choose the required options marked with the RED ( * ) asterisks and it will compute automatically the options you choose. We also offer Optional Upgrades but they are not required. And then once you hit on Buy Now button, go to the top most portion of the website and you can see a cart image logo and click on that then you can see VIEW CART and CHECKOUT to determine the total cost of the guitar including the shipping and the discount.
If this were a list of the best electric guitar brands for metal it is very likely Jackson would be near the top. This is a company practically synonymous with metal, and for decades the most extreme players on the planet have looked to Jackson to get the job done. But Jackson also has a strong presence in the rock and hard rock genres, and if that’s your bag you’d be smart to give them a good look.
Typically do not use any effects, but have an EQ, Sustain, and Room echo sim in my effects chain with Ampkit on my iPad that I use pretty much 100% of the time, but my goal is clean ,clean, clean. I'm still just a beginner so I am holding off do effects until I at least learn how to play. I play more Jazz then anything else. I even play metal clean so I can hear my technique.
Immediately you can see that this unit is on the larger side, measuring 25 inches (63.5 cm) across, and weighing about 11 lbs (5 kg). If you’re concerned about portability, we noticed one of the most purchased items together with the HD500X is this case, which comes highly recommended and will keep your multi-effects pedal safe during transit and storage. The Line 6 POD HD500X itself has superb build quality. It has a very nice metal chassis, and heavy duty construction. The build quality probably doesn't get much better than this in a multi-fx unit (we say it is a step above the Zoom G3X). We won’t spend a ton of time talking about the inputs/outputs and controls available on the Line 6 POD HD500X, since you can very easily discern that from photos of it. We will say that of all the multi-effects pedals on our top 5 list, this is the most robust. The inputs/outputs cover above and beyond what you probably need. You’ve got your basic inputs and outputs, USB 2.0 so you can use it as a USB interface and for DAW integration, MIDI in/out/thru, FX send and return, AUX input, balanced XLR outputs, integrated mic preamp, and more. In short, however you want to integrate the HD500X into your bedroom, music studio, or live setup, there’s a very good chance you’re covered.
You can set an octave to play the higher or lower notes or both at the same time. This is ideal for those who want to really thicken up their sound and are often used by heavy metal guitarists to make solos and riffs sound really cool! The Valeton OC-10 Octave pedal is a budget friendly choice and the Electro Harmonix Nano Pog is an industry standard option.
In March when the Cut interviewed Fabi Reyna, the editor-in-chief and founder of She Shreds, a magazine for female-identifying guitar players, she commented on men insisting she listen to the guitar heroes we’re all allegedly mourning. “I was talking to a dude at a big company recently and he asked me if I’d heard of this band, which was, of course, a band of all dudes,” she said. “I was like, ‘Sorry, I don’t know much about male guitar history, and I don’t really care to. Don’t tell me or ask me about these bands because I just don’t know them.’”

The final stages of on-board sound-shaping circuitry are the volume control (potentiometer) and tone control (a low-pass filter which "rolls off" the treble frequencies). Where there are individual volume controls for different pickups, and where pickup signals can be combined, they would affect the timbre of the final sound by adjusting the balance between pickups from a straight 50:50.


The brilliance of Guitar Rig is the ability to create so many different tones. This is in large part due to the variety of amps that are modeled in the software. You have a choice between Citrus, Ultrasonic, High White, Tweed Delight, Plexi, and Lead 800, among others. I’m sure you can guess what Native Instruments’ clever amp names translate to in the real world.

I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar. I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best. You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment. You get treated like a valued customer. Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars. They have a great variety of quality instruments. Plus, they have some really cool, unique guitars. A place like this is so rare nowadays.


Before deciding on how to go about mic’ing the amp, listen to the sound in the room. If the guitar is being recorded as part of a rhythm track in the same room as drums and other instruments, the only option may be to use a close-mic’ing technique, unless you don’t mind dealing with the other instruments bleeding into the guitar track. Recording guitars in isolation, as an overdub, presents more options for ambient room mic’ing. Experiment with mic positioning to achieve the right amount of room sound and the desired bass and treble response. Distance-mic’ing in a very live-sounding room can create an appealing slapback echo-type sound, while close mic’ing gives you absolute flexibility in the mix.   
Many musical instruments are works of art, so it’s little doubt that design is very important to a lot of people. Make sure that you really like the way a guitar looks before purchase, because you might be playing it for years. This is one of the reasons the more natural wood colored guitars are always popular - they don’t go out of style or look out of place.

Many people "re-amp" direct guitar tracks recorded to a DAW using amp-modeling software, with good results. Plug-ins are wonderfully suited to the virtual  recording environment, allowing for fast access to a plethora of modeling amplifier and speaker cabinet combinations, hence tones, effectively replacing a roomful of amps, cabs and microphones. Programming the virtual amplifier is the same as tweaking the knobs on the real thing, and the same is true for programming software dynamics and effects processors in relation to their hardware equivalents. As the realism and sophistication of modeling technology continue to develop, so does the viability of virtual re-amping as a production technique.
Thank you for the post. This explained a lot to me. However, one question I have is that I play lead and when I solo, I need to boost volume. I currently have an Ernie Ball volume pedal but I can never get it to go back to the right spot when I decrease the volume after a solo. I’d much prefer to use stomp box that I can just preset the volume before playing so I have a solo volume, and a strumming volume that matches the other guitar. Do you have any suggestion on what I can do to achieve this since the EB pedal doesn’t seem to work well for me?

The prototype was introduced at the 2011 NAMM exhibition. Bolan is seen holding the instrument on the outer gatefold jacket of T. Rex, his first album after shortening the band name from “Tyrannosaurus Rex”. The guitar was stolen from Bolan in London, and for the last months of his career he was using a wine-red 1970s Les Paul Standard. Gibson announced the availability of the Marc Bolan signature Les Paul in February 2011.

This model stands out from the rest due to its modified Explorer body shape. It’s one of the more affordable guitars with such an exotic design. However, it not only looks good but it also sounds good as well. There’s enough juice in those pups to make any amp scream. Explorers aren’t really my thing, but I can’t say that Jackson JS32T Kelly was bad when I played it. On the contrary, it’s actually quite good.
The earliest extant six-string guitar is believed to have been built in 1779 by Gaetano Vinaccia (1759 - after 1831) in Naples, Italy; however, the date on the label is a little ambiguous.[37][38] The Vinaccia family of luthiers is known for developing the mandolin. This guitar has been examined and does not show tell-tale signs of modifications from a double-course guitar.[39] The authenticity of guitars allegedly produced before the 1790s is often in question. This also corresponds to when Moretti's 6-string method appeared, in 1792.
Go to the blues and jazz though and things change. Listen to the guitars. Warm, mellow, beefy, thick, with tons of butter. And those guitar sounds are mostly clean or overdriven (not distorted as with a distortion pedal). Using the neck pickup works well for this, but in addition to that, guitarists roll off the tone knob to cut more of the treble to warm up the tone and make it blend with the rest of the music. It also keeps the tone beefy and thick so the soloist can cut through the mix but without sounding as harsh like a rock player. Don’t get it wrong though, some blues and jazz tones will require trebley tones, but the guitarist will use the tone knob to change his tone instantly without having to change his amp settings for each movement or song, especially when improvisations and long instrumentals are involved.
I have a very unique Lyle guitar. It is apparently a 1972 but on the headstock it has the pearl from Gibson and it says Gibson on it as well on the headstock. It has the tail trapeze and the adjustable saddle. I recently had it set up and there is absolutely no fret buzz, it looks like it just came off the wall, stellar condition. My tech was stunned at the body condition and even the frets were like a new guitar? This is the only guitar I have seen that is definately a Lyle but it has Gibson, correctly done on the front of the headstock? I went in to the acoustic section and played a Gibson new hummingbird next to mine and it sounded cheap! I was stunned. I have no idea what this is worth but is like the perfect guitar. No dents, nicks, scratches, just and old guitar that has been babied, no warping anywhere, I think this will play another 30 years easy. If anyone knows about a Lyle with a Gibson logo and Gibson written on the headstock, please let me know
Yamaha is famous Japanese Company known for producing an extensive range of musical instruments. It has caught the attention of the beginners and intermediate guitar players due to its budget-friendly product prices. Thus, it is the excellent choice for those who are going to have a first experience of buying any guitar. They can indeed get a good deal without costing a fortune. It is also suitable for Acoustic players. Yamaha continuously produces high-quality instruments that are unconquerable when it comes to the material or even sound quality.
Open the case and you will find over 689MB of rich guitar tones ranging from 70 to 130BPM. These sensational loops are neatly arranged into 3 categories comprising of 50+ Ballad Hooks, 50+ Steady Riffs and 50+ Upbeat Jams, all applicable to a vast range of genres! From the clean, delay-drenched chime of Ballad Hook 'Serene' to the upbeat overdrive of Steady Riff 'Perpetual' and the crunchy swagger of Upbeat Jam 'Loose', STUDIO GUITARS redefines quality guitar samples and delivers them in stunning 24-bit high definition.
@Josh – Changing the order of the effects in your signal chain can drastically change the sound you get from each pedal depending on where it was before and where it is now. Can you please send us an email to support@strymon.net with further details including a video recording of what you are experiencing so we have a better idea of what is happening?

Don’t worry about getting the strumming patterns down perfect. You will develop your own strumming style in time. Just try to stay in time. If you have to strum open strings in-between chords, while you switch from one to the other, that’s OK, too. In fact, sometimes, it’s even desirable. It’s what we call ‘style’. You’re main objective right now is learning the chord fingerings, and getting your changes smooth.
A lot of amateur guitar players are tempted by the ‘cut’ of a high treble sound that gives their notes definition above the cacophony of the rest of the band. They become so accustomed to this sound that they lose sensitivity to its harshness. Treble becomes the ultimate weapon in their arsenal for the volume war, but to the listener, all they hear is a headache, aka bad tone.
Epiphone was once among the most significant competitors of Gibson. Later on, Gibson acquired them and, now, Epiphone form sits budget-friendly. However, the popularity of Epiphone as one of the best electric guitar brands was always there owing to their affordability and near to top-notch quality. Thus, choosing an Epiphone Les Paul guitar doesn’t mean you have to compromise much on the tone and specs. In fact, you get a guitar with specs comparable to Gibson – that too – on a much cheaper rate.
Whether you call us Guitar Center Forth Worth or GC Cowtown, it's all the same to us! One way or the other, we'll be sure to send a smile and a big Texas "Howdy!" your way when you walk in the front door. Conveniently located on South Hulen Street, we're just a stone's throw from Hulen Mall, near the Chisholm Trail and I-20 interchange. Turn in when you see Chili's, and get ready to experience the down-home vibe that's been growing our community of regular customers since our grand opening back in 2004.First and foremost at Guitar Center Fort Worth, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales to repairs, our staff in each department is well-trained to cater to Dallas/Fort Worth area music-lovers. Our store is open every day of the week, so there's always a right time to visit even if you're on a busy schedule.
Last Update Sept 22nd, 2018 Electric guitars are those that have an amplification feature. You can connect your guitar to a power source and amplify the sound produced onto a loud speaker. They are normally a perfect choice for stage performances and bands. Below are brief reviews of 10 best electric guitars in India, which are among the best in Indian market. These best electric guitars were curated by our experts according to their popularity, reviews and ratings by people across India.
The 600 series pairs maple back and sides with a spruce top that has gone through Taylor’s torrefaction process, which accelerates the wood’s aging process through heat. We couldn’t find a single fault with this guitar’s build quality and the 612ce is an unbelievably comfortable guitar to play. The tone is still that of a maple guitar, but a more refined one than we’re used to. Likewise with the torrefied spruce: it’s immediately familiar, but with enough difference to cause a cocked ear. Strumming out chords and standard singer-songwriter fare was pleasing, and it put in a good shift with some country-style flat-picking, but it is fingerstyle playing that this guitar lives and breathes. By any token these models from the 600 series are stunning guitars. They have a laudable ecological footprint, they look superb and they have rich, unexpected tonal qualities. 
In 1961, Grady Martin scored a hit with a fuzzy tone caused by a faulty preamplifier that distorted his guitar playing on the Marty Robbins song "Don't Worry". Later that year Martin recorded an instrumental tune under his own name, using the same faulty preamp. The song, on the Decca label, was called "The Fuzz." Martin is generally credited as the discoverer of the "fuzz effect." [18]
Kadence guitar has soothing sound quality with a bright tone, which indicates you have to go for higher gauge strings if you need bass-heavy sound output. This guitar is manufactured in our home nation – yes in India! was established in -2006. They produce an acoustic range of guitars that are available at a starting price of 5000 INR. approximately. Guitars in this brand that have a superior quality of sound start from 10,000 INR.

One of my friend's first "good" guitars was a Lotus LP copy with a set neck. Your typical heavy brown 70s with a plain top LP copy but it had binding like a custom and real inlays. I helped him put dimarzios in it and we set it up. It was a pretty good guitar except for the color. His mother bought it new, and it was a medium priced guitar back then (not cheap really, it was $400 or so in the 70s).
A looper pedal or "phrase looper" allows a performer to record and later replay a phrase or passage from a song. Loops can be created on the spot during a performance or they can be pre-recorded. Some units allow a performer to layer multiple loops. The first loop effects were created with reel-to-reel tape using a tape loop. High-end boutique tape loop effects are still used by some studios who want a vintage sound. Digital loop effects recreate this effect using an electronic memory.
This is another really nice 12" 16 ohm guitar speaker from 1973, and is a matched pair with the one listed earlier, it has its original Pulsonic H1777 cone, and is in excellent condition, there it also has a tiny repair on the edge of the cone but this doesn't affect the sound in any way.Cash on collection preferred but carriage can be arrange if required.

Welcome to Part 1 of a new Gibson series that will dissect a different breed of effect each week, to tell you—the player—what each does, and how it does it. Effects pedals can be divided into a range of categories of types, but there are undeniably some gray areas between these, since different designs will achieve their sonic ends via different means. The distinctions get blurrier when we throw digital technology into the brew. An analog and a digital chorus, for example, are very different circuits, approached—from the design perspective—from very different standpoints, although the sonic results may sound roughly similar (in the good ones, though, the subtleties are usually quite distinctive).


And while he'd heard its calling, Swank didn't move into the field until death arrived at the music shop where he was working. The resident guitar repairman suffered an aortic aneurysm and died. "It was terrible," Swank says. "He was a good friend of mine, but he still had a bunch of stuff in his shop." But Swank was able to step in and finish some of those jobs, and then more jobs began pouring in. The next thing he knew he had built a reputation for himself. "I'm a [guitar] player. I know how I like things to work, how instruments should play."
By moving up or down one level, in terms of magnetic strength, you can usually add or subtract a little edge from a pickup. If your guitar is too tangy, moving down one pickup level (e.g., from alnico 4 to alnico 2) may smooth it out. If you want to add bite, go with a slightly stronger magnet—like, alnico 5 to a ceramic magnet. The good part is that magnets are both easy to find and inexpensive in comparison to buying a whole new pickup.
Description: Body: Maple & Poplar & Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple & Poplar & Maple - Neck Attachment: Glued - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Cream - Frets: 22 - Inlay: Pearloid block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ABR-1 - Cutaway: Double - Hardware: 2x Volume Control, 2x Tone Control, Grover Tuners - Pickups: Burstbucker 1/Burstbucker 2 - Pickup Configuration: H-H - String Instrument Finish: Faded Cherry - String Instrument Accessories: Hardshell Case, Certificate of Authenticity - Made In: America

Seagull guitars were first manufactured in Quebec in 1982. Their goal was to introduce a high-quality guitar with all the essentials for a reasonable price. It goes without saying that they completed that goal, as Seagull guitars are still here today.Seagulls are great for both beginners and pros. They are durable and high-quality. They have incredible sound-quality and they have something for everyone. They make both acoustic and electric guitars at reasonable prices. Seagulls are easy to play even for beginners. Additionally, they strive to reduce the impact guitar manufacturers have on the environment. They use sustainable wood sourcing so that they can avoid deforestation. Reclaimed wood is often used in the production of Seagull guitars. 


i have an original 12string vox mark XII and i would like some parts (original or replicas) to repair it. For example the neck(is the right word?)has a surious damage and i want to replace it, also i miss the tremolo stick and the circle black plastic stuff fit the back side. i need some connections all around the world but it could be better if i ll find something in europe. please help-mail me and sorry for my english syntax. dimitris from athens greece.


Started shopping here when I was just getting my feet wet with the music career, bought a Mexican Humbucker strat and went on from there. Over the next 3 years, after many pedals, amps, and other major gears, I've become a solid local musician. This place has the best service hands down to take care of your gear needs in your career, they find out what you need, let you demo the gear for as long as you want, and never forces you to make a purchase decision. I'm glad I can go to this place for all my gear needs and support, so I can spend most of my time on actual music. The employees are super chill, and you eventually get to know them and the bands they play in after a while. It's a really supportive community for local musicians.


We would also recommend starting off with a DIY guitar pedal building kit. We created a list of the best DIY pedal kits here. Places like Mammoth Electronics and Build Your Own Clone (BYOC) have some fantastic sounding kits available – they even come with a step by step guide to lend you a hand along the way. Even Amazon has a killer tube drive pedal kit!
If anyone has earned the right to two spots on this list, it’s Fender. Sitting squarely at the top of the guitar and amp game, this Southern California company might be at their peak at this very moment – and that’s a very good thing for you, if you want to get into playing guitar. This Super Champ X2 amp is a hell of a value, boasting the welcome bounce of Fender’s signature sound in a package that wont break the bank. And what’s even cooler about it is that it has 16 different amp modeling selections – meaning you still get the warmth of tube amplification with the right amount of modeling amp versatility. It also comes with two channels that can be controlled via an optional footswitch, and it’s equipped with a USB port for easy and quiet recording.

The old Harmony and Kay guitars were notably inferior in playability and sound to professional-grade instruments by Martin, Gibson and Fender. Typically the necks on the student grade instruments were clumsy in contour compared to a professional-grade instrument, and generally the action was much higher. Neckset angles on student-grade acoustics were often quite poor on Day One such that they were physically hard to play when new. By the time they were ten years old, the neckset angles had often shifted so much that they were virtually unplayable. While today many craftsmen are very adept at resetting necks, in the mid 1960s no one I knew had mastered techniques for doing this. Even companies such as Martin and Gibson did not reset necks if guitars were sent back to them for warranty service. Martin's typical approach at that time was to plane the fingerboard, such that it was virtually paper thin by the nut and full thickness by the body joint, and then refret. Gibson would frequently tackle such a problem by sawing the neck off at the heel joint, chopping the remainder out from the dovetail with a chisel, and installing a new neck. Student-grade instruments with poor necksets frequently were simply thrown away. Truss rods in student grade guitars usually were little more than window dressing. Although many of these guitars bore labels reading "steel reinforced neck" or actually had a truss rod in the neck, these rods usually were not functional. Martin had a steel T-bar in the neck from late 1934 through the 1960s, and Gibson and Fender both had highly functional truss rods, but Harmony, Kay and other makers of student guitars usually installed rods so poorly that any attempt to adjust the rod was simply an exercise in frustration and futility. While Harmony and Kay as well as some other makers turned out many hundreds of thousands of guitars and greatly exceeded the number of instruments produced by Martin, Fender and Gibson combined in those days, a surprisingly small percentage of those instruments have survived over the years, such that good condition original examples are remarkably scarce today. Some of these instruments have become quite collectible and now bring prices exceeding $1,000. Kay hollowbody electrics with the so-called "Kelvinator" peghead, especially the early Barney Kessel models, are now considered to have a considerable "cool factor." Likewise, original Danelectro "longhorn" guitars and basses have a visual flare as well as a funky distinctive sound of their own.

Both guitarists have been a large part of the Montgomery Gentry sound since the beginning. Garrett had been working the bars in Lexington, Kentucky and ended up becoming the first-call guitarist for singer Troy Gentry. When he and Eddie Montgomery teamed up to conquer the Nashville music scene, Bo was the natural pick for lead guitar. When the time came to expand their sound by adding a second guitarist to embrace their Southern Rock roots, bassist Andy Bowers recommended his brother Frank. Being the consummate professional that he is, Frank did his homework and nailed the material his first day out, earning him his spot on stage with the group for more than eleven years now.


Your skill level on the guitar is another factor that should be taken into consideration while shopping for the perfect instrument. It is generally wise to start out with a lower quality model when you are first beginning to study the guitar, whereas a veteran player with a trained ear will likely require the bells and whistles of more high end gear. If you’re a beginner, it’s a great idea to start out with a Yamaha or a Fender Squier, for example, as you get plenty of quality to learn on without breaking the bank. It’s wise not to go overly basic, however, as cheap guitars will have harsh playability that will leave a beginner with painful calluses that may scare them away from the instrument.
Signature Guitar was a Canadian Guitar company, which providing good quality guitars for more than 30 years. They produce high quality electric guitars, beautifully crafted and basses. Their guitars are especially made for Indian weather. The company is situated in Aurora, Ontario, Canada. They are regarded as one of the reputed Indian Guitar brand. The price range starts from 4,999/- onwards (approx).
BAJAAO bring to you the best and extensive range Electro Acoustic Guitars also known as the Acoustic Electric Guitar or Semi Electric guitar in layman terms from all over the world. Versatile in design, the electro acoustic guitar is known for its smooth sound and powerful projection. At its core, an acoustic-electric guitar is acoustic in style fitted with a pickup device allowing it to be plugged into an amplifier, a number of effect pedals or played on its own for a more intimate sound. Heard in basically every genre of music, these guitars are indispensable in almost any modern band setting. In acoustic-electric nylon string guitars, piezoelectric pickups and microphones are used because magnetic pickups are not capable of picking up vibrations of non-magnetic materials. The design is distinct from a semi-acoustic guitar, which is an electric guitar but with the addition of sound chambers within the guitar body. Buy the best Electro Acoustic Guitars online with BAJAAO.com with the best and affordable price in India. Make your shopping experience a wonderful one with us.
With modern recording systems, track counts aren’t usually much of a limitation any more. In addition to a mic’ed up amp or a feed from pedals into your interface, try to also capture a clean feed of the guitar signal if your amp or pedal board allows a direct output to be routed. If you record this as well as the amp / fx feed, you have another option to re-process the guitar recording in software if you decide the original feed isn’t right.
An excerpt: “The Dobro brand name has been identified with resonator guitars since 1929 and is currently owned by Gibson Guitar Corporation. Despite its registered trademark status, the Dobro name has at times been used generically to refer to woodbodied instruments with 1) an aluminum cone or “resonator” mounted so that the cone opens toward the top of the instrument and 2) an 8-armed spider assembly supporting the bridge.”
I started by consulting with an old friend, Ken Korman, guitarist of the New Orleans band The O-Pines and a serious aficionado of guitars both expensive and cheap. He gave me some good ideas of what kinds of guitars had hit the market in the last few years and a few models we should consider considering. A walk through January’s National Association of Music Merchants (NAMM) show in Los Angeles gave me further insight.
The humbuckers were smaller than typical, with metal covers and two rows of exposed adjustable polepieces. The pickups and three-way were mounted on a small black/white pickguard, with knobs on the body. Two jacks for mono or stereo output were mounted on the side of the lower bout. The two-octave unbound rosewood fingerboard had dot inlays. Early Preachers had “Preacher” engraved on the lower pickguard and a bridge/tailpiece assembly was similar to that on the Breadwinner/Deacon, with more metal and less plastic. Other versions are seen without the engraving and all-metal bridge/tailpieces, indicating the model evolved. Though no information is currently available on when the transition occurred, based on evidence from later UKs, it happened late, possibly around 1980.
Whilst we’re on the subject of practice amps, we have to talk about the amazing BOSS Katana-Mini Guitar Amplifier. This little powerhouse of tone makes our best cheap amps that don’t suck list due to its immense sound, portability and inspiring tones within. Coming straight out of the acclaimed BOSS Katana series, the Katana-Mini uses the authentic multi-stage analog gain circuitry which allows you to select from three classic sound settings - Brown, Crunch, and Clean and enjoy a selection of fantastic sonic options. On top of that you have a classic 3 band EQ to dial in your perfect sound as well as an onboard tape-style delay.
Here we have a beautiful player with great heritage.. This guitar was an Import from Japan back in 1978 its a very well built guitar and employs the same x bracing seen on Martins. Workmanship is very high as is materials the vintage tone woods are beautifully mellowen and the tone has opened up nicely on this and so the volume is good on this guitar with a new set of straings now sounds like quite big a Piano...clear and clean god volume and reasonible bass.. Very good sound from this one..t also plays quite nicely with good play action not to low not to high...it plays very wel.. structually no cracks or serious anything to speak up just the most minimap superficial nicks as this vintage guitar qualifies for the xcllent vintage condition catagory. The finsh is wonderful and glass like shine to it and has a beautiful warm patine to it you can't get without waiting the near 40 years for it to age this way... this guitar will make somon a wonderful D-18 /28 style instrumnt to enjoy for another 40 years... If your like us you love vintage instruments and this is a bargain of a great lttle player, for a song.. You will be pleased. Thanks for looking if interested contact Joe at : gr8bids@comcast.net .

At the end of the day, this is obviously far from a perfect example, but this is an extremely hard-to-find factory left-handed 1958 Gretsch Duo-Jet, and provides a very rare opportunity for the vintage guitar collector, lefty or righty! I have seen far fewer left handed 50s Gretsch guitars as compared to Fender, Gibson, and even Martin over the years. Lefty 50s Gretsch guitars are insanely rare, especially in the Duo Jet model!
Martin also developed a line of archtop instruments during the 1930s. Their design differed from Gibson and other archtops in a variety of respects–the fingerboard was glued to the top, rather than a floating extension of the neck, and the backs and sides were flat rosewood plates pressed into an arch rather than the more common carved figured maple. Martin archtops were not commercially successful[citation needed] and were withdrawn after several years. In spite of this, during the 1960s, David Bromberg had a Martin archtop converted to a flat-top guitar with exceptionally successful results, and as a result, Martin has recently begun issuing a David Bromberg model based on this conversion.
{"pageName":"[gc] pdp: gandl legacy solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114488369;;;;evar65=Used-Guitars-G&L","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
: : "Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired

Another tone option for a guitarist is to put a pickup out of phase with another pickup, producing a thin "inside-out" squawky kind of sound. When 2 pickups are in phase, they work together and reinforce each other. When they are out of phase the 2 pickups are working against one another and the resulting sound is the "leftovers" from these cancelations. The closer the 2 pickups are, the greater the cancelations, the thinner the sound and the lesser the volume. Therefore, the neck and bridge pickups out of phase is the best choice for this type of sound.


When you start to look for that great beginner's electric guitar, focus on an instrument with good-quality wood and reasonable workmanship. That's the most commonly accepted method of choosing a low-cost electric guitar for a beginner. Guitar manufacturers tend to cut corners with cheaper guitars by using, for instance, cheaper pickups and hardware. But for the guitarist who gets more serious about playing, these are all upgradeable parts that can be swapped out for higher-quality parts. So begin with a good-quality wooden frame and upgrade as time and money allow.
If there was any doubt left in the late 1950s that the guitar – not the saxophone – was rock & roll's essential lead instrument, Duane Eddy settled the argument: See his 1958 single "Rebel Rouser," curled with country twang and rippling with tremolo. "Chet Atkins used vibrato in a selective way – Duane Eddy used it to thrash the music," says the Kinks' Dave Davies. The impact of Eddy's hits, like "Forty Miles of Bad Road" and "Peter Gunn," would soon be heard in surf music and guitarists such as Jeff Beck and George Harrison.
When looking at acoustic pianos, there are so many variations that can lead to differences in tone: upright vs. grand, hammer types, mechanical condition, the player, mic choices, and mic techniques. No matter what, though, the piano tends to be a behemoth in the mix – for better or worse – so most often you'll be looking to cut holes out for other things in your mix.
I ordered this for my 6 year old nephew for Christmas. He wanted one because I had just recently bought my 3rd. I thought a smaller one would be nice for him to start learning. Just opened the box and the amp doesn’t work! At all! Light turns on but nothing else happens! Hooked guitar up to my own amp and it sounds nice so it’d definitely not the guitar or cords fault. Trying to get a replacement but no luck.
JVGuitars is very proud to present to you yet another wonderfully aged High end Law Suit guitars out of Japanese it is a hand crafted acoustic guitar built well almost 40 years ago, what many may not know is that Takamine on these high end exotic tone woods models were master built by using well aged tone woods of 25-30+ years of age at the time when built making this a true vintage guitar in its own right. This example has been very well maintained and taken care of as you will see, this is a California guitar and has not seen much of the ravages of extreme weather and other extreme changes that can damage 0 warp – dry our and Split – crack and otherwise severely damage a perfectly good instrument so this guitar shows no evidence of any of those common afflictions on the contrary this guitar is rather CLEAN over all,Its beautiful solid spruce top is pretty flat and its bridge is nice and tight as well and its bracing ( same as Martin D-28 ) is all good throughout so this guitar has good bones!, bindings too are all good, frets are good and we dressed and polished the frets and they are good for another 20+ years of play, its neck is excellent!.. Fresh install of a new Martin bone nut and compensated saddle and this guitar is set up with Martin Marquis strings and plays beautifully. The original tuning gears are in place and working excellently too. This guitar is a pleasure to play its action is very good at medium - low more on the lower side of medium and it plays with ease and sounds incredible and has even more saddle room to go lower in future if wanted . This guitar has the LOOK it just has it… its absolutely GORGEOUS with the breath taking 2-piece center seam Brazilian Rosewood back & sides - fingerboard and headstock overlay its truly stunning ,as stated it’s exotic TONE WOODS are of the Brazilian Jacaranda verity and its presence overall is stunning perhaps surpassing that of the Original Martin D-28 they copied/ I will suggest that you be the judge of that see for yourself and have a good look At some old Martins as well this guitar stands toe to toe with any of them. This example is nice and deep sounding and its volume is excellent. This guitar is JVGuitars condition rated at 9/10 vintage excellent , it is not new or mint it has a few minor dings as its over 40 years old, it has patina aging that of the color showing on the bindings have Ambered naturally with age this is what make a vintage guitar beautiful this is in the eye of the beholder. These exotic TONE WOOD series guitars in this kind of condition are hard to find these days this one is A real GEM!…… Let me know if interested Thanks for Looking Joe Email me at: JVGuitars@gmail.com excellent recording possibilities.. Pics soon to come ! any questions let me know: jvguitars@gmail.com .
The Boss Waza 212 Guitar Amplifier Cabinet has been specially designed as a partner to the awesome Waza Amp head. Packed with 2 custom made 12 inch speakers and ready to roar! You can even select whether you want the back to be open or closed, allowing you to make whatever sound you want! If you want extra speakers, there's also the Boss Waza 4x12 Guitar Amplifier Cabinet with 2 x 12" speakers to pump out your riffs with.
Gibson makes authorized copies of its most successful guitar designs. They are less expensive than those bearing the Gibson name. A former competitor, Epiphone was purchased by Gibson and now makes competitively priced Gibson models, such as the Les Paul and SG, sold under the Epiphone brand,[69] while continuing to make Epiphone-specific models like the Sheraton, Sorrento, and Casino. In Japan, Orville by Gibson once made Gibson designs sold in that country.[70] Gibson has sought legal action against those that make and sell guitars Gibson believes are too similar to their own.
One of  the most widely used guitars in jazz, the ES-175 is a semi-acoustic, hollow-bodied archtop that comes equipped with two humbucking pickups. The ES-175’s deep body produces the thick, dark sound beloved of jazz guitarists and the thin neck allows for fast chording and soloing. The bridge pickup is capable of producing a less jazzy, thinner sound, and ES-175s can be used in blues and rock.
Dave Friedman (Rack System, Ltd.): “Pedal order is a very subjective thing, and I’ve had people do it all backwards because that’s the way they like it. Generally speaking, compressors come before overdrives, modulation things are kind of in the middle, and delays are at the end. The wah is kind of a personal preference. Sometimes it’s in front early in the chain, and sometimes it’s after overdrives.
While the other digital amplifiers we tried (the Blackstone ID:Core Stereo 10 V2 and the Line 6 Spider Classic 15) offered a similarly wide range of good sounds, most of our panelists preferred the Champion 20 simply because it was easier to use. Lynn Shipley Sokolow preferred the simplicity of non-digital amps such as the Vox Pathfinder 10, but she said, “The Fender is the best of the digitals because it’s easy to understand the controls.”
The better-quality Japanese guitars of the mid 1970s to the present have rivaled the quality of many new American guitars of the same time period. It is worth considering, however, that the 1970s were almost without a doubt the worst period in the history of American-made guitars as well as numerous other American manufactured products. I am firmly of the opinion that no Japanese maker has equaled the quality of pre-World War II Gibson and Martin acoustic instruments or electric guitars by Gibson and Fender of the 1950s through the mid 1960s, but I would be quick to agree that a Tokai or Fuji Gen Gakki top-line instrument of the mid 1970s would be in many cases every bit as good and in some cases superior to Norlin-era Gibson and CBS-period Fender guitars. While "Made In Japan" had a connotation of cheap and mediocre quality in the 1960s through the early 1970s, by the end of the 1970s "Made In Japan" was often viewed by consumers of guitars and other products such as automobiles as being as good as if not superior to American. Some of the Japanese instruments have gone on to be viewed not only as being of fine quality but worthy of consideration by collectors. While I personally do not collect Japanese made guitars and do not deal large numbers of these instruments, I would certainly agree that many of them are of excellent quality and provide good value.
Let us move from the best amplifiers among the mid range priced small amplifiers to the more affordable ones. The gap between affordable and less affordable has never been felt this much, in terms of money of course. In terms of quality, the gap is not that noticeable, especially not when you have a contender like the Orange Amplifier Micro Crush PiX 3 Watt 9-Volt mini amp. This little orange cube of happiness provides the side of the person it spends it time at, with a whole lot of brightness and a seeming ray of light. Whether it is because of the bright coloring of the amp, or because it is actually a great sound being amplified from it. Whatever it is, I really do enjoy this little piece of vocal citrus, especially since it has the best combination of so many important qualities for an amp. It sounds good, it looks good and it is so easy to maintain and carry with you wherever you go.
Fuzz: A fuzz pedal or "fuzzbox" is a type of overdrive pedal that clips a sound-wave until it is nearly a squarewave, resulting in a heavily distorted or "fuzzy" sound.[53][56] Fuzzboxes may contain frequency multiplier circuitry to achieve a harsh timbre by adding complex harmonics.[57][58] The Rolling Stones' song "(I Can't Get No) Satisfaction", with the main riff played by Keith Richards with fuzz guitar, greatly popularized the use of fuzz effects.[23] Fuzz bass (also called "bass overdrive") is a style of playing the electric bass that produces a buzzy, overdriven sound via a tube or transistor amp or by using a fuzz or overdrive pedal.
Semi-Hollow: As the name suggests, you’re getting a smaller type of sound box while some support of amplification at the same time. This allows us to use an amp (with proper adjustments — there will definitely be some feedback worries of course), but they’re a lot lighter in weight than solid bodies and people tend to say they’re more versatile than our previously explained type. The superlatives used when it comes to hollow-body sound usually include “warm”, “bright”, and nice overtones. Preferred guitarists? Jazz, rockabilly, vintage country, etc.
Potentiometers (Pots) for audio are used to adjust tone and volume. Pots are resistors with three terminals and a sliding contact (the wiper) that creates an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are most commonly used as control devices, such as volume control on audio equipment. A potentiometer for Audio applications would feature very low to no introduced noise.
While it was produced, Ovation’s super-shallow 1867 Legend was the recommended guitar in Robert Fripp‘s Guitar Craft.[22][23] Tamm (1990) wrote that the acoustic 1867 Legend has “a gently rounded super-shallow body design that may be about as close to the shape and depth of an electric guitar as is possible without an intolerable loss of tone quality. Fripp liked the way the Ovation 1867 fitted against his body, which made it possible for him to assume the right-arm picking position he had developed using electric guitars over the years; on deeper-bodied guitars, the Frippian arm position is impossible without uncomfortable contortions”.[22]
The Supro aluminum Hawaiian lap steel was similar to Beauchamp/Electro’s “frying pan,” with a round body and guitar-like neck, very similar to the Rick, but with the top carved away to allow a little more access. Given the close nature of the L.A. guitar world, it’s entirely possible that all these aluminum guitars were cast at the same place. The head was three-and-three with a single cutout in the middle. The Supro had dot inlays on the fingerboard, with an alternating two/one pattern and four dots at the octave. A rectangular Supro logo plate sat between the pickup cover and the fingerboard. The pickup – the single-coil version of the Stimson design – was mounted under a raised cover (part of the casting) with a slit to reveal the bar polepieces. It had one volume knob on the treble side and was housed in small form-fit hardshell case. This was closest to Beauchamp’s patented electro guitar design, making the Supro brand a direct descendent of George Beauchamp. An important point to remember is that these cast aluminum guitars were made in Los Angeles.
I thought I'd give a review from the point of view of someone completely new to the guitar, for those of you out there like me who are wondering if this will really teach you or if it'll be a frustrating waste of money. First off, I'll say that it isn't easy. As someone completely unfamiliar with the frets and the strings, I had a tough time starting out - very slow and clumsy. BUT, you'll see improvement REALLY quickly. I've only been playing for about two hours and although I still suck, I'm having a great time and I'm already loads better than I was when I started out. The only reason I stopped was because my finger got sore from holding down the strings. So far, for someone who's wanted to learn and either never had the time or money to take lessons, or found practice to be tedious and dropped it, or just doesn't have a mind for reading music, this is a definite recommendation. If anything changes as I get further along, I'll update this review. But as of now, I love it!
{"id": "L20582", "skuOrProductId": "L20582000001000", "categoryId":"site1AAG", "name":"Slash Firebird Limited-Edition Electric Guitar", "pageUrl":"/guitars/epiphone-slash-firebird-limited-edition-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/Slash-Firebird-Limited-Edition-Electric-Guitar-Trans-Black/L20582000001000-00-120x120.jpg", "addToCartUrl":"/guitars/epiphone-slash-firebird-limited-edition-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"Designed in collaboration with the legendary Guns N' Roses guitarist, this limited-edition Slash Firebird won't last long. After all, as Slash himself says, "Who doesn't want a Firebird?" Limited to a production run of just 900, worldwide, this version of the iconic guitar combines tradition, like the reissue Kluson banjo-style tuners, with some of Slash's signature touches like the Seymour Duncan Slash signature Alnico II pickups and flame maple top. Great for rock and blues, don't miss your chance to snap one of these up. Case sold separately.", "value":"899.00", "priceMin":"899.00", "priceMax":"899.00", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"40", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "Best Seller", "checksum":"565047124900", "priceVisibility": "1"}
Before buying any guitar you have to fix a budget range, so that later on you do not end up blowing off more money than you actually wanted to. Yes, it is true that buying a guitar can be expensive, but you do not have to burn a hole in your pocket in order to buy one. Just have a price range fixed and then search for the best ones accordingly. You may not find the good ones right at the beginning, but eventually you will definitely find the perfect one that will even last long.
While modified four-stage phasers like the Uni-Vibe and other effects before it had sought to evoke a choral-like sound, the chorus pedal as we know it didn’t arrive until affordable short-delay chips became widely available in the late 1970s. This in itself implies that chorus is a type of delay, and indeed it is, but the sonic results of the ways in which these short delays are transformed lands the effect firmly in the modulation camp, so it’s easiest to consider it as such (the function of these delay chips will be explained in more detail in the Echo & Delay section down the road). IC-based chorus effects work in a manner very similar to flangers, detailed above. The main difference, put simply, is that the short delays used to create harmonically spaced notches and peaks in the frequency spectrum are manipulated to modulate more tightly above and below specific frequency ranges, rather than shifted to swoosh broadly up and down the entire spectrum. The result, and intention, is a sound like a group of singers or similar instruments, where some voices/strings inevitably waver slightly from those beside them, producing a quivering clash of harmonics that evokes space and dimension when used subtly. The effect is possibly best heard—as pure effect, at least—in stereo, and the nature of the beast lends itself readily to stereo outputs. The broad soundstage and Doppler-like movement a good stereo chorus can spread out before you between a pair of spaced amps or L-R headphones make it one of the most spacious, three-dimensional effects available, short of long delays or cavernous reverb settings.
Don't just slap an effect on a track: why not try using automation to apply effects (in this case delay) on single words or phrases to make them stand out? Modern audio sequencers make it very easy to play around with spot effects — that is, effects which are applied to single notes or phrases within a track, rather than to a pattern or track as a whole. Try using different reverb styles on the snare within drum patterns: a short decay on the '2' and a long decay on the '4' for example. Another idea is to apply spot chorus to individual words within a vocal line, as a way of adding emphasis to the lyrics. The 'freeze' or audio bounce-down function of a typical sequencer allows you to get around any problems your computer might have in running lots of instances of a particular effect. Stephen Bennett
The first and easiest adjustment that most electric guitars can benefit from is stuffing soft foam into the cavity behind the pickups in order to stop microphonic squealing. The first time I used this was when I was repairing a Gibson Firebird for Johnny Winter—the foam stopped the pickup’s back plate from vibrating like a microphone diaphragm. I have since learned that reducing the space (the cubic volume) behind a pickup modifies its sound at higher sound levels. Discovering this resonating-chamber effect has altered my approach to routing a body for pickups on new guitars, too.
So, I was looking for a single-ended amp. Say what you will about class A/B amps (and, to be fair, most of the great recorded tones in rock history are class A/B push-pull amps), some of them don’t really get singing until they’re too loud for the bedroom or studio. Sometimes you just need to hear that cranked tone without getting the knock from the neighbors. To quickly recap:

After these is the overdrive/distortion, in this case our ST-2 Power Stack. The CS-3 Compression/Sustainer (and the PW-10 V-Wah) can improve the ST-2’s sustain and tone by increasing the signal to it, so they’re placed before the ST-2. Many players use a compressor just for this reason, and the “fixed wah” sound, which is a wah pedal turned on but not continuously swept, is very common in rock and metal lead tones.
For the typical two-figure Boss pedal price, the RC-1 gives you the stereo connection, some onboard memory and a little more recording time. However you do lose the true bypass and analog dry-thru circuit that makes the TC Electronic Ditto so attractive to guitar players. Still, for acoustic rigs, I find the Boss RC-1 to be the most ideal looper pedal option and a better value than something like the Ditto. 
That's right, we have another Martin guitar. This time around it's the Martin DCPA4R from their Performing Artist series. This guitar is not really the very best they have to offer, but we feel that it combines all of what makes Martin so unique at a price that isn't impossible to afford. Because there are some insanely priced ones out there from Martin and others, but funnily they aren't the best of the best, just the most expensive.
The next most important review criteria for any electric guitar, is its sound. Please allow me to be very clear here that this guitar is mostly suited for heavy rock tones, aggressive higher leads and chugging, crazy distortions. If you are more interested in a crisp, jazzy tone, maybe you should opt for a beginner’s Stratocaster electric guitar like Squier by Fender, instead. Having said that, this instrument sounds great in its genre, and also remains in tune for long periods, so you don’t have to worry about manually tuning it. Yes, the string tension is higher as compared to a 24.75” Stratocaster or XX Les Paul, but in a way this challenges electric guitar novices to acquire greater mastery over their notes!
“I like it because it’s light and simple,” Alana said, reflecting on its 5.1-pound weight. “It’s easier to get my hand around the neck on this one,” Charles noted. Both found the Les Paul Express’s rounded top shoulder to be more comfortable than the horn-shaped cutaways on most of the other short-scale models, and they felt the smooth finish on the back of the neck made it easier to play. The adults agreed. “I’m surprised—for a small guitar, it’s fun to play,” Ken Rosser said.
The main advantage of the Rocktron Velocity V10 is the low price tag. It is one of the better values for beginner guitar amps out there. There is nothing particularly amazing about the Velocity V10 in its own right, but it can potentially cost less than half as much as some other beginner level amps. The Velocity V10 is capable enough to be a solid practice amp with a price that almost nothing of similar quality can match. It is a good budget option that delivers on all the actually necessary features.
The Effect: Volume pedals are a simple, yet frequently essential piece of equipment for many musicians out there. This device’s function is quite self-explanatory – it allows the user to control the level of the sound output, allowing them to increase or decrease the volume of the instrument. Additionally, many of these products can also operate as expression pedals, or a control for some of the other effects on your pedalboard. These gizmos are typically known for being strong and sturdy pieces of gear, as they should since they get stomped on quite a lot. If you are looking for a proven solution, go for the Boss FV-500H, if not, check out our Best Volume Pedal reviews to find your perfect match.
Pre-delay on the reverb can help separate it out from the source sound. If your reverb has no controls for pre-delay, you can simulate this using a simple delay on an aux track before the reverb. Decay Settings: Choosing the most appropriate reverb treatment for a song can be surprisingly difficult, especially if you have hundreds of presets to choose from. So, instead of regarding reverb like the glue that holds the mix together, try adjusting its parameters (and in particular the decay time) while listening to the reverb return by itself. If the decay time is too long you'll hear a continuous mush of sound; if it's too short you'll scarcely hear it unless its level is turned right up. Somewhere in the middle you should find a setting that adds rhythmic interest to your song, without overpowering it, making the reverb work for its keep. This is also a useful technique when using several reverbs in a song, to make sure they complement each other. Martin Walker

Ovation’s Lyracord backs weren’t the company’s only fling with synthetic materials. In the early ’70s Charles Kaman set his engineers, many of whom were not guitar players, to work on developing a new synthetic guitar, yielding the deep-bowl, acoustic-electric Adamas which went into production in 1976. The Adamas top, called a Fibronic Soundboard, was made of a laminate of carbon-graphite and birch about a third the thickness of a conventional spruce top. Instead of a regular round central soundhole, Kaman engineers positioned 22 smaller holes on the upper shoulders surrounded by epaulets of multicolored woods in a kind of leaf design. The bridges and headstock featured elaborate scroll carving. The neck was reinforced with a patented Kaman bar, a u-shaped cast aluminum insert designed to keep the neck stable even with dramatic changes in temperature and climate. The necks and fingerboards were made of walnut. The fingerboards had hollow triangular maple inlays, tapered beginning at the 18th fret on the bass side to the 24th fret on the treble. Hardware was gold. Until the advent of Ovation’s Collector Series in 1982, the Adamas was Ovation’s flagship, favored by the likes of Larry Coryell and others.
Purchase the required hardware. There’s a lot of variety in terms of the looks and capabilities of the parts you’ll need for your guitar. You can choose based on the kind that existing guitars you like use, or experiment with something new. You can easily buy the equipment you’ll need from most guitar shops or online. For an electric guitar, you’ll need:[3]
Sorry it has sold: Here we have a rather nice rare vintage 1970 Yairi & Son Classical acoustic guitar It's Label reads... Hand Crafted in Japan by Yairi & Son Model # 300 Serial # 177 Pretty darn low serial number 1970 remember she's 45 years old! Condition overall is very good - excellent used / vintage Not new or mint of course... Regarding its build quality She exhibits beautiful workmanship and superior materials Aged woods of over 30+ years old in 1970 when it was built! Tone-Woods now are in the 75 year range on this example looks like a Vintage masterpiece with its patina and look and feel I love these oldies funny thing is It still shines like glass to, amazing really when you think about it. This guitar has very good deep base tone and excellent volume and plays easily and comfortably the neck is nice and big 2" at the nut nice and wide feel to it. The neck is made of a high grade mahogany see pics, back and sides are also beautiful mahogany, with black or very dark brown bindings for a very classic look, the on the business end she has a wonderful quality solid spruce top with lots of bear claw figuring a really nice sound box it projects very well in deed... As you look at its back side in its entirety top to bottom it's hard to find a blemish I'm sure there are a few minors but it's really looking very clean and with a surprisingly shiny original finish... The front the headstock is pretty clean as well!...notice a bone nut has been fit, frets show little to no wear what so ever more than 90% remaining fret life, the fingerboard shows a little play action remember it's a 1970! ... The top as several chips and drinks and I have addressed them a touch up lacquer pen and just dabbed the tiny chip to prevent further chipping there it as a result after I polished it up turned out pretty darn good looking too, This guitar came to us as a partial trade with its bridge pulled nearly off by a ding dong previous owner that put regular gauge dred heavy gauge strings on it for long term and it lifted off in time, I removed all that cleaned up the woods & prepped it for a new vintage period correct Jacaranda rosewood classical bridge and glued it with hide glue clamping it up for 2 weeks & set her up with a bone nut & saddle and a new set of Dean Markley strings... This beauty comes with its original hard shell case black Tolex with a plush Marigold lining one bad latch but still functions well good hinges and handle so it's still ok. This is rock solid now as the Yairi & Son label says use only nylon strings. If you just use what Yairi suggested this would have never happened not Yairi's fault just the wild eyed idea gone wrong. Anyways she's back in action and sounding better than ever so if you like these old Yairi & Son classical guitars this may be a good consideration for you.... Let me know if you likeeee. Email Joe at: jvguitars@gmail.com .
Another negative I found was that this book focuses more on traditional music notation, and places guitar tablature into the background. As a guitar teacher, I believe that tabs are the next best thing to sliced bread, since it makes learning soooo much easier for beginner guitarists. And since learning the guitar is hard, anything that makes it simpler is more than welcome. On the other hand, if you want to learn to read standard music notation, this will be the way to go for you.

Electronics installs are one of my favorite jobs here at the shop and this project was one of the funnest.  Installing a Clapton pre-amp is more then just a quick wiring job because of the surface mount board.  The board needs to be routed into the body underneath the pickguard.  Setting up the router is the most time consuming part of this job and once the routing in complete the actual wiring takes only a few minutes.  The guitar was then topped off with a fret level and setup. -Evan
Gibson now restricts the use of the name Dobro to its own product line, but care should be taken in interpreting documents written before 1993 or from outside the US. In these cases, the terms “Dobro” and “dobroist” may not necessarily refer to a Gibson Dobro. For example, consider the references to the use of a Dobro guitar on songs like “The Ballad of Curtis Loew” by Lynyrd Skynyrd, “Valium Waltz” by the Old 97’s, “When Papa Played the Dobro” by Johnny Cashon the Ride This Train album, or “Gold Dust Woman“, a song by Fleetwood Macfrom the album Rumours which features a Dobro. Mark Knopfler of Dire Straitsis famous for his guitar of this style, featured on the cover of the album Brothers in Arms.[2]
Check out, for instance, this rare bird. A 1966 Wurlitzer Gemini, made at the Hollman-Woodell guitar factory in Neodesha, Kansas. Part of Wurlitzer’s THE WILD ONES series (which included the more pedestrian-looking, but still pretty rad Cougar and Wildcat models), these were made to compete with the best of the domestic market. High end tuners (Klutsons), a wonderful chunky bound neck (like a Fender V shape, but a bit thicker), and a great look highlight the Gemini.
In order to achieve supreme neck grip comfort, the fretboard edge is finished with a smooth curve that extends from the border between the fretboard and the neck, and then to the surface of the fretboard. The detailed neck shape is precisely carved using a ball mill for ultimate consistency. The width measurements of the fretboard are at 42mm at the nut and 56.4mm at the last fret. These dimensions allow for an easy grip in the lower register, and a more modern feel in the higher register.

Ultimately, if you’re mostly playing rock, heavier blues, or any shred or metal styles, you might prefer jumbo or medium-jumbo frets. However, for country, rockabilly, surf, or old-school ’50s rock and roll, narrow frets could be the way to go. In any case, though, if your frets are in good condition and your guitar is set up right, the size of that wire in and of itself shouldn’t stop you from sounding great on whatever you play.

My first guitar was a fender knockoff. My first professional guitar was a Gibson LP custom. I like the richer tone of the Gibson for ballads, folk and country and the Fender gives you the edge you need for rock, garage and loud stuff. Foot pedals get the sounds you need for just about any style of music with either brand. The fender neck is a bit easier to move over because it is thin and fat-fingered guys like me need a bit of help that way. The Gibson reminds me more of my acoustic guitars. Strings are an important selection for any guitar to be comfortable and get the right sound.


A younger, but very high-quality brand that's also a favorite among country artists, Taylor manufactures some truly investment-worthy acoustic guitars—with a sound that only improves over time. Its creator, Bob Taylor, tested the use of exotic tonewoods in excellent guitars, so he used oak recovered from pallet wood to craft the back, sides, and neck of the Pallet Guitar, an important model originally made in 1995. Taylor's roster of tonewoods also includes Indian Rosewood, African Ebony, Blackheart Sassafras, Blackwood, Cocobolo, Figured Walnut, Granadillo, Hawaiian Koa, Maple, Ovangkol, Sapele, Tropical Mahogany, and several others.

This beautiful wood is not a very common tonewood for the construction of a guitar body, but you may see it more commonly in neck construction. However, it has been done to build a guitar body, and it was done well on the famous Gibson J-200 that the Epiphone EJ-200SCE also imitated. It’s a very solid, hard, and dense wood that has amazing sound punch and bright tones.
The Boss Katana Head is a full featured amplifier head that can handle stage, recording and practice duties. It does this with its built-in power attenuator, which lets you choose between 100W, 50W and a super quiet setting of 0.5W. To complement the 0.5W setting, Boss even added a built-in 5" speaker into the amp head - making the Katana head to be technically a combo amp in head form factor. Complementing its versatile power rating is its built in amp modeling, which gives you five voicings from acoustic, to clean to high-gain. As expected, this amp comes with essential effects from Boss, with over 50 of them to choose from, 15 of which can be loaded to the amp for quick use, albeit limited to just 3 effects running simultaneously. Finally, all these features are packed in sleek looking profile that feels really solid, as expected from Boss.
Gibson guitars have a shorter 24.75-inch scale length, giving them a looser feel and a somewhat warmer tone. They feature resonant tonewoods, typically mahogany for the body and neck. The neck is set in place and glued instead of bolted. Les Paul-style instruments have carved tops made from another tonewood such as maple, but other instruments such as the SG have flat tops like the Strat. If something goes wrong with this kind of guitar you may be able to repair it yourself, but issues like broken necks and headstocks require work done by a professional luthier.
Before buying any guitar you have to fix a budget range, so that later on you do not end up blowing off more money than you actually wanted to. Yes, it is true that buying a guitar can be expensive, but you do not have to burn a hole in your pocket in order to buy one. Just have a price range fixed and then search for the best ones accordingly. You may not find the good ones right at the beginning, but eventually you will definitely find the perfect one that will even last long.
In 2005, Gibson issued three Pete Townshend signature edition Les Paul Deluxe guitars, based on Townshend’s heavily customised “#1” Wine Red 1976 Les Paul Deluxe, “#3” Gold top 1976, and “#9” Cherry Sunburst 1976. These guitars were modified by Alan Rogan and used extensively on stage and in the studio with The Who. In addition to the two mini-humbuckers the guitar carried, Rogan modified Townshend’s originals with a DiMarzio humbucker in the middle. Toggle switches located behind the guitar’s tailpiece turned the pickup on and off and added volume boost. The control knobs were wired for volume, one for each pickup and a master volume. The reissues differed from Townshend’s originals in that the reissues had an inlay at the first fret while the originals did not.

Another factor to consider are the alloys used to make the string. Acoustic strings may be phosphor bronze or an 80/20 bronze/zinc alloy, electric strings may be pure steel or a steel/nickel alloy, and the outer winding on the thicker strings may be either round wound or flat wound, which is typically used by jazz guitarists for smooth fingering with less fretting noise. Acoustic and electric strings are both now available with special super-thin coatings to protect them from sweat and corrosion. Coated strings cost more, but generally last much longer. Find out what type of string your favorite player uses, try guitars with different types of strings at your local guitar store, then try a few different sets on your guitar to see what feels and sounds best for your playing style. Major manufacturers include Ernie Ball, Martin, GHS, D'Addario, and Elixir, among others. Make sure you have a string winder to make installing the strings go faster, and some pliers with a fine wire cutter to clip the excess string from the tuning post, a well as some guitar polish - changing strings is a good time to perform some routine maintenance. Keep a clean cloth in your case to wipe down the strings after each use, along with extra bridge pins for your acoustic guitar. Regular string changes are the best way to keep your tone crisp and clear, so grab a pack and tune 'em up!
The XB-40, (short for Extreme bending-40 reeds), is unlike any other diatonic made. Released in 2003, it was specifically designed by harmonica specialist Rick Epping to simplify proficient bending of the notes. To make this possible, the XB-40 uses forty reeds as opposed to the usual twenty found in most ten-hole diatonics. With these bending capabilities, the XB-40 gives access to all the notes on the chromatic scale through bending the natural tones of each hole. This model was discontinued in 2013. Shortly before production officially ceased, Suzuki Music released a similar model the SUB-30.[28]
ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Hauptfeder Anschlag Tremoloblock Anschlagstab Bei richtig gestimmter Gitarre stellen Sie die Hauptfeder ein, um sicherzustellen, dass Anschlagstab den Tremoloblock und Anschlag berührt. Wenn der Anschlagstab nicht den Tremoloblock und Anschlag berührt, stellen Sie die Hauptfeder- Einstellschraube ein, bis Kontakt hergestellt ist.
Yamaha is the most revered and leading manufacturer of full-line musical instruments. With its wide range of guitars, the company has become a best seller and is easily one of the best guitar brands in India. The C Series are the popular and affordable nylon string guitars by Yamaha suitable for beginners and young learners. The electric guitars of Yamaha available in India are of the Pacifica and RGX series. The Pacifica series offers the most value for money combining affordability with performance.
A better way to get distortion, of course, is to use guitar effect pedals. Got your hands on some pedals and starting to play around with the sounds you can make? Well, you can still use these tips to further enhance your distorted tone, since the same theory applies. Most distortion pedals have a volume, gain, and distortion knob in addition to whatever additional controls they give you. If you're simply not satisfied with your pedal's guitar distortion, you can turn the gain up and adjust the other settings, just like you'd do on your amp.
The National STEM Guitar Project, in partnership with NSF Advanced Technological Education (ATE) Centers with funding provided through a grant from The National Science Foundation (#1700531, #1304405, & #0903336), hosts innovative Guitar Building Institutes throughout the US. Five-day institutes, combined with additional instructional activities comprising 80 hours, provide middle, high school, and postsecondary faculty training on science, technology, engineering and math (STEM) applications as they relate to the guitar. The institutes present and teach participants hands-on, applied learning techniques to help engage students and spark excitement for learning STEM subject matter.
If you’ve ever stepped foot into a music store, you’ve seen a Hal Leonard book. They’re iconic in the annals of guitar-learning lore. They’re not the hippest or the most accessible, but they nevertheless remain key fixtures. This compendium combines the three books of the method into one. Just about everything you need to know is in here somewhere, though it’s commonly said that an instructor is needed to parse the flow of information. Still, it’s a great reference and if it makes sense to you out of the gate, there’s the potential to learn a lot from this classic tome.
In addition to the 1/4" input for your guitar, you may want to consider amps with better connectivity features like those with built-in USB output for direct recording, footswitch input, aux input for jamming with tracks, and headphone output. Speaking of headphone out, there are some amps that come with built-in speaker cabinet simulated outputs, this subtly changes the resulting sound much like the amp cabinet would without having to actually use the speaker. There are also a number of newer guitar amplifiers that come with Bluetooth connectivity for streaming audio and for software control.
{ "thumbImageID": "American-Elite-Precision-Bass-Maple-Fingerboard-Electric-Bass-Natural/J32625000002000", "defaultDisplayName": "Fender American Elite Precision Bass Maple Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000006153", "price": "1,999.99", "regularPrice": "1,999.99", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Precision-Bass-Maple-Fingerboard-Electric-Bass-Tobacco-Sunburst-1500000006153.gc", "skuImageId": "American-Elite-Precision-Bass-Maple-Fingerboard-Electric-Bass-Tobacco-Sunburst/J32625000003000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Elite-Precision-Bass-Maple-Fingerboard-Electric-Bass-Tobacco-Sunburst/J32625000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000006152", "price": "1,999.99", "regularPrice": "1,999.99", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Precision-Bass-Maple-Fingerboard-Electric-Bass-Natural-1500000006152.gc", "skuImageId": "American-Elite-Precision-Bass-Maple-Fingerboard-Electric-Bass-Natural/J32625000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Elite-Precision-Bass-Maple-Fingerboard-Electric-Bass-Natural/J32625000002000-00-60x60.jpg", "imgAlt": "" } ] }
These handpicked guitars represent the very highest-end when it comes to collector-grade, vintage instruments. Take a look at these stunning, investment-level guitars and basses from the golden eras of Fender, Gibson, Gretsch, Martin, Rickenbacker and more. These stunning specimens are the things of gearhead dreams, and even if you can't afford one today, there's still plenty of fun to be had perusing and exploring these iconic guitars.
Much like booster pedals – where its placement depends on what exactly you’re looking to boost – the location of compressors and wah-wah pedals in a signal chain will vary depending on what type of sound you are trying to create. In this case, you are encouraged to experiment with their order and see what you like best. Although as mentioned above, try to keep the wah-wah after tier one effects as they generally do not sound that usable in that order. Compressors, on the other hand, can be placed before any pedal, even distortion, as it shapes the signal rather than modifies it.

GuitarFX™ guitar software (it's on the market since 1997!) enables you to turn your computer into a guitar effects processor. Simply plug your guitar into the microphone or line input of your sound card, run this software, then press "Start" button. To stop playbacking pre-recorded guitar sounds click once on a picture of a small red lamp placed left to fx-slot with "Playback wav" title. Enjoy real-time crazy distortion smoothed by power filters and shaped by multi-band equalizers! Author of GuitarFX™ offers several presets, including "hard rock", "high gain lead" and "solo" effects. However, you can click through several menus to easily create custom tones. They can be saved as pre-sets for future use. Pre-sets can be assigned to "hot keys" F1..F12. Among the effects, you can apply 4 types of distortion, noise gate, wah-wah, compressor, EQ, flanger, reverb, chorus, delay and a number of other filters and effects. You can save your recordings to your hard drive. GuitarFX has the "software effects chain builder" with 16 fx slots. Clean guitar signals go to the top fx slot, then they are passed through all fx slots from the top to the bottom and go to the sound card output from the bottom fx slot. You can move any fx slot up. To do this place your mouse cursor on the top part of the appropriate "Tune" button and then do right mouse button click. Also you can move any fx slot down. To do this place your mouse cursor on the low part of the appropriate "Tune" button and then do right mouse button click.
Micro size and simple for live performance. 4 types of guitar effect in one strip: compressor, overdrive, delay and reverb Design for blues, jazz and country music etc. Max. delay time: 500ms Aluminum-alloy, stable and strong, LED indicator shows the working state. Sonicake Multi Guitar Effect strip Sonicbar Twiggy Blues is an effects pedal combo for roots/outlaw rockers. It combines the four most important effects: compressor, overdrive, delay and reverb in one, and it features a built-in cabinet simulator for getting a real stack sound straight from the PA system. It’s a tool that can take you back to the 60's, to that golden age of rock n' roll. Taste it! Specification: Power: DC 9V 5.5x2.1mm center nagative, 105mA Max. delay time: 500ms Dimension: 262mm ( D ) x 64mm ( W ) x 4.
If you're in a small, unsigned band, it's very important to choose an amp that's loud enough - as not every venue will mic your amp. Ironically, bigger artists don't need to worry about this, since they are safe in the knowledge they'll always have a good sound and their amps will always be mic'ed. That's why Seasick Steve plays a small Roland Cube amp, but it's not necessarily a great choice if you're in a band who plays live.
Don't forget that you can use MIDI velocity and other controller data to create quite complex effects — and this approach can take up much less computing power than using audio effects. Don't forget that you can create audio-style effects purely through MIDI. For example, using a grid-style sequencer, it's very easy to program in echo and delay effects, just by drawing in the repeated notes and then putting a velocity curve over the top to simulate the echoes fading away. By combining this with automated MIDI control of other parameters — reverb send, filter cutoff and resonance, for example — you can alter the timbre of the repeated note and create dubby-sounding, feedback-style delays. Stephen Bennett
The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
Use a lead to connect the row that the positive (anode) leg of the input cap C1 is on to the row that the base (middle leg) of the transistor Q1 is on. Use a second lead to connect the emitter row (left hand leg) to the ground bus. Finally, use a lead from the collector (right hand leg) row to a new row on the other side of the breadboard, near the power bus.
Modern electric guitars most commonly have two or three magnetic pickups. Identical pickups produce different tones depending on location between the neck and bridge. Bridge pickups produce a bright or trebly timbre, and neck pickups are warmer[when defined as?] or more bassy. The type of pickup also affects tone. Dual-coil pickups sound warm, thick, perhaps even muddy[citation needed]; single-coil pickups sound clear, bright, perhaps even biting[citation needed].
×