Overdrive / distortion pedals are one of the most important effects on your board and are very much a personal taste. The ones on my pedal board change all the time, I have more than a few that I really like; Analogman King Of Tone, Pete Cornish SS-3, Ibanez Tube Screamer, Boss Blues Driver, Nobels ODR-1,  Zen Drive, MXR Distortion +... and I like and use all of them. Probably my all-time favourite os the King Of Tone, but on a budget, the Nobels ODR-1 is great value and runs with the very best!
Zappa – would have liked to hear him play with Hendrix – as a compliment not competition. Zappa, a classically trained musician, playing in a rock and roll world,had such depth of experience from without – as much as Hendrix had from within – too bad the intensity killed him; Zappa tamed it and had fun with it. Hendrix was driven by it. Great guitarist? Who cares! My picks are artists, something a machine, human or otherwise can not approach let alone touch, and that is what it is all about, touching the soul through music. One trick ponies are a dime a dozen – some of them are at the right place at the right time and their ego does the rest. Who will be remembered a hundred years from now – it will not be the "best".
So I was all, "oh no...I want this one." So I did leave with it, and without even asking they sold it to me at less than the price on the thing because it was the demo and had a tiny belt buckle type scuff or two on the back. I think I actually wound up saving a few hundred dollars. I don't know if they figured a percentage of the total should be knocked off, or what.
Most bass speaker cabinets employ a vented bass-reflex design, which uses a port or vent cut into the cabinet and a length of carefully measured tubing or pipe to increase the low-frequency response and improve the speaker system's efficiency. To give an example, if one compares two bass cabinets, each with the same type and power of power amplifier, one cabinet being a sealed box and the other being a vented or ported cabinet, most listeners will perceive that the ported cabinet produces more bass tone and deeper bass tone. Less commonly, some bass speaker cabinets use one or more passive radiator speakers, a voice coil-less "drone cone" which is used in addition to a regular woofer to improve the low frequency response of a cabinet. Passive radiator speakers help to reduce the risk of overextension. Acoustic suspension designs with sealed cabinets are relatively uncommon because they are less efficient. Some cabinets use a transmission-line design similar to bass-reflex, and in rare cases, some large cabinets use horn-loading of the woofers (e.g., the Acoustic 361 18" speaker cabinet from the late 1960s).
The 75 Watt Fender Rumble 75 Bass Combo Amp and its 150 Watt and 300 Watt counterparts can produce an overdrive effect by using the gain and blend controls, giving overdrive sounds ranging from "mellow warmth [to] heavy distorted tones".[27] The Fender SuperBassman is a 300-watt tube head which has a built-in overdrive channel. The Fender Bronco 40 includes a range of effects including modern bass overdrive, vintage overdrive and fuzz.
The first recording of an electric guitar west of the Mississippi was in Dallas, in September 1935, during a session with Roy Newman and His Boys, an early Western swing dance band. Their guitarist, Jim Boyd, used his electrically-amplified guitar during the recording of three songs, Hot Dog Stomp, Shine On, Harvest Moon, and Corrine, Corrina.. An even earlier Chicago recording of an electrically amplified lap steel guitar was during a series of sessions by Milton Brown and His Brownies (another early Western swing band) that took place January 27-28, 1935, when Bob Dunn played his amplified Hawaiian guitar.
ESP is another huge brand in the realm of electric guitar, with huge bands like Metallica, The Rolling Stones, Deftones, Lamb of God, and Slayer endorsements in full swing. Any fan of this kind of acts will be very interested in starting with an ESP of their own. Like Fender and Gibson, ESP has a more affordable range known as LTD. This kit includes an electric blue H-51 guitar with 24 frets and dual humbuckers, as well as a 12 pick sampler set, gig bag, guitar stand, strap, 10-foot instrument cable, and a tuner.
Bottom Line: The Line 6 HD500X is incredibly in-depth in the amount of options and editability it gives you. Doing all of it from the small screen on the actual unit is headache-inducing, but if you have a computer you can hook it up via USB and edit your sounds from there much more easily. There’s more of a learning curve with the HD500X than there is with the Zoom G3X, but the presets are decent enough and allow you to audition it if you’re the impatient type. Where the HD500X lacks is that it’s less of an immediate-gratification pedal, and it’s hard to tweak on-the-fly and come up with potentially inspirational sounds. Because of how the interface is, this is definitely more of a “sit down with headphones and tinker with it to get your perfect sound” type unit. If the effects quality of the Zoom G3X is a 7/10, the Line 6 HD500X is an 8.5/10. This is the one to get if you’re the type that likes to dig in and have control over every little thing. The price tag is a little on the high side, but considering what a powerhouse this unit is, it’s definitely not unreasonable.
This particular Duo-Jet belonged to a right-handed gentleman who had owned and played it upside down from 1971 to 2008. The Duo-Jet was Gretsch’s answer to the Gibson Les Paul Custom, and the overwhelming majority of these were black, with a sprinkling of Cadillac Green from 1956-1958. In addition, the single-cut Silver Jet 6129 was offered with some custom sparkle colors from 1954-1960. This guitar was refinished in Orange a long time ago, before the second to most previous owner acquired it in 1971.
Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.

Essentially the 28s looked very similar to the E/EM/EB-18s. They had the same offset double cutaway body outline and the modified Viennese three-and-three headstock. Instead of maple laminate bodies with glued-in necks, the 28s had mahogany bodies and necks in a neck-through-body design. The basically slab bodies of the E-18 had gained a carved top, with a deep contour in the upper waist. The brass nut had become a Micarta nut. Fingerboards were now ebony. Finishes were sunburst.

You need to know what colour code your pickup wires are. If the 4-wire pickup is a Seymour Duncan then the link above should work for you, if it’s another brand of pickup then you’ll have to figure out how to correct for the appropriate colour wires e.g. DiMarzio pickups use a different colour code on their wires to Seymour Duncan and they’re all fairly easy to find on the web.
Think of some of your favorite songs. Maybe they get your toes tapping, or get you pumped up and ready to take on the world. Regardless of your musical preferences, the odds are that one thing all of our favorite songs have in common is an absolutely killer bass line. The bass has played a key role in holding down the rhythm throughout the history of popular music, and continues to make an impact to this day. Another One Bites the Dust by Queen, Been Caught Stealing by Jane's Addiction, Money by Pink Floyd, Sweet Emotion by Aerosmith, and Longview by Green Day are just a few examples of songs that are taken to the next level thanks to their incredible bass lines. Now it's your time to make your mark on this instrument with some serious grooves of your own. You'll find bass guitars for every skill level and playing style in this section.
One of the biggest hits of all-time, this song incorporates everything that is 80’s pop and is performed in the key of F# major, in 4/4 time. Lauper originally didn’t want to sing it since the original version was written by Robert Hazard, who wrote it from the perspective of a man. Eventually, the singer released her version of the song and the rest is history. 
Launch price: $779 / £849 | Body: Mahogany with maple top | Neck: Maple | Scale: 25" | Fingerboard: Rosewood | Frets: 24 | Pickups: 2x 85/15 'S' humbuckers | Controls: Volume, tone (with push-pull coil-split), 3-way selector | Hardware: PRS vibrato, PRS SE tuners | Left-handed: Yes | Finish: Fire Red Burst, Tobacco Sunburst, Trampas Green, Whale Blue
So the most likely answer here is to increase the height of that side of the bridge a little. This may mean the 5th and 4th strings are a little higher than absolutely necessary, but it's always about compromise with these things (unless you want to individually file down the heights of each of the saddles, but I'd advise against doing that until you really know what you're doing).
Sometimes called an auto-volume, these pedals work the same as the wah-wah pedal.  The effect functions based on your picking dynamics, but instead of a change in tone, you get a change in volume.  The effect will have no volume when you pick, but will then swell up to audible levels.  It masks your pick attack and simulates the sound of a bowed instrument.

Effects such as chorus, phasing, flanging and pitch vibrato are created using pitch modulation and, except in the case of vibrato, the modulated sound is added back to the original to create the effect. The pitch modulation is generated by delaying the signal by just a few milliseconds, and then modulating the delay time, using a low frequency oscillator (or LFO). For vibrato, this is all that needs to be done and, because the delay time is actually very short, the effect is perceived as happening in real time. The other effects, however, generally rely on an equal balance of the dry and modulated signals to achieve the strongest effect, so it is easier when working with plug-ins to adjust the wet/dry balance using the plug-in controls, rather than adding the wet only signal via a send/return loop. As a rule, these effects aren't very processor-intensive so, if you're working with plug-ins, you can probably afford to insert as many as you need into track or bus insert points as required. Stereo versions of these plug-ins may generate different modulated delays for the left and right channels to create a more dramatic spatial effect.
Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
Even apparently crude solutions can produce useful results. For example, I was recording at a friend's flat many years ago and the amp I had only sounded any good when it was played flat out. The answer was to place the speaker cabinet on its back, place the mic right up against the grill, then cover the whole thing with blankets, sleeping bags and anything else that came to hand. It made the level in the room far more tolerable yet still produced the sound I wanted!
While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:
Spruce has historically been the wood of choice for acoustic flat-top guitar soundboards. However, Luthiers and other large guitar manufacturers very often choose more economical and readily available woods rather than top-quality spruce. Redwoods and cedar, for instance, are often used in soundboards by American guitar-makers to great effect. In some cases, two different woods are used together to give the guitar a distinctive appearance and tone.
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.[14] Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.

Sorry Joe but I don’t really any value of this arrangement. It could work only in super bright guitars that would always need some treble bleed. It’s much better to change pot values for guitars like that, go from 500K to 250K etc. When changing pots doesn’t cut it it’s better to get rid of the pickups/guitar than to have a bleed circuit on all the time, some of the magic is always lost.
If you love the sound of both acoustic and electric guitars, but you want to play both at the same time without draping one of each over your shoulder, then an Acoustic simulator pedal is ideal. These pedals take your guitar signal – regardless of what electric guitar you’re playing and make it sound like it’s an acoustic. These are often used by guitarists on stage who want to switch between an acoustic and electric guitar sound during a set or even the same song. The Boss AC-3 Acoustic Simulator is a great option.
The Fretted Synth website has mysteriously disappeared (the likes of Native Instruments not happy that they’re giving away so much goodness for free??), so we’re linking to the Rekkerd page that still seems to host the plugins. FreeAmp3 really shouldn’t be free: it features masses of sound-shaping potential and the user interface looks great. If you just want one (free) VST guitar plugin, get this.
This company really does nothing for me. Hideous designs, cumbersome shaped guitars and the fact that they keep milking dime bags name just makes me feel like they don't have much else. There are definitely worse brands out there like first act and daisy rock (shudders) but I've always thought dean just always sucked as a metal guitar company and b.c. rich isn't to far behind them in my opinion.
Curiously, Les Paul also contributed to recording... along with building his own recording studio at his home, he built his own disc cutting system, and did multitrack recording on acetate discs... recording on a disc, then overdubbing himself and that original disc playing onto another disc, and so on. He later worked with Ampex on multitrack tape machines, and released the first multitrack electric guitar recording on Capitol records in 1949... however, Sydney Bechet had released a multi-track recording using Paul's techniques back in 1941. 
Signature guitars in India provide a convenient way to cherish the same guitar experience, reminds you of your favorite artist. These are specified guitar models named after the top guitar players, and designed with their instructions to make them a real emblem of their signature music. In fact, some signature guitar brands are directly created by your favorite artists to ensure precision.
Boost/volume pedal: A boost or "clean boost" pedal amplifies the volume of an instrument by increasing the amplitude of its audio signal. These units are generally used for "boosting" volume during solos and preventing signal loss in long "effects chains". A guitarist switching from rhythm guitar to lead guitar for a guitar solo may use a boost to increase the volume of his or her solo.[59]
By 1968 (and probably with the union of Unicord), Merson and Gulf + Western, Univox amps had begun to employ a Japanese-made chassis in Westbury-made cabinets, still with the high-quality Jensen speakers. These combined tube output with transistorized components. They were covered with a black Rhinohide vinyl and sported a silver plastic logo with stylized block letters – initial cap with a little tail off the left followed by lower case letters – typical of the earliest imported Univox guitars, on the black grillcloth.
A common issue for playing on larger stages or in studios is the distance between a guitarist’s pedals and their amp. Guitar cables that are longer than eight or nine meters (25 or 30 feet) not only degrade the quality of the signal, but also become incredibly susceptible to noises like hiss and hum. To allow guitarists to drive their signal over 100 meters (300 feet), Radial created the SGI-TX/RX™. The SGI changes the unbalanced guitar signal to a balanced line-level signal, altering the impedance for longer XLR cable runs; guitarists are able to use their amps offstage or in an entirely separate room when trying to craft the perfect tone.

(function(){"use strict";function s(e){return"function"==typeof e||"object"==typeof e&&null!==e}function a(e){return"function"==typeof e}function l(e){X=e}function u(e){G=e}function c(){return function(){r.nextTick(p)}}function f(){var e=0,n=new ne(p),t=document.createTextNode("");return n.observe(t,{characterData:!0}),function(){t.data=e=++e%2}}function d(){var e=new MessageChannel;return e.port1.onmessage=p,function(){e.port2.postMessage(0)}}function h(){return function(){setTimeout(p,1)}}function p(){for(var e=0;et.length)&&(n=t.length),n-=e.length;var r=t.indexOf(e,n);return-1!==r&&r===n}),String.prototype.startsWith||(String.prototype.startsWith=function(e,n){return n=n||0,this.substr(n,e.length)===e}),String.prototype.trim||(String.prototype.trim=function(){return this.replace(/^[\s\uFEFF\xA0]+|[\s\uFEFF\xA0]+$/g,"")}),String.prototype.includes||(String.prototype.includes=function(e,n){"use strict";return"number"!=typeof n&&(n=0),!(n+e.length>this.length)&&-1!==this.indexOf(e,n)})},"./shared/require-global.js":function(e,n,t){e.exports=t("./shared/require-shim.js")},"./shared/require-shim.js":function(e,n,t){var r=t("./shared/errors.js"),i=(this.window,!1),o=null,s=null,a=new Promise(function(e,n){o=e,s=n}),l=function(e){if(!l.hasModule(e)){var n=new Error('Cannot find module "'+e+'"');throw n.code="MODULE_NOT_FOUND",n}return t("./"+e+".js")};l.loadChunk=function(e){return a.then(function(){return"main"==e?t.e("main").then(function(e){t("./main.js")}.bind(null,t))["catch"](t.oe):"dev"==e?Promise.all([t.e("main"),t.e("dev")]).then(function(e){t("./shared/dev.js")}.bind(null,t))["catch"](t.oe):"internal"==e?Promise.all([t.e("main"),t.e("internal"),t.e("qtext2"),t.e("dev")]).then(function(e){t("./internal.js")}.bind(null,t))["catch"](t.oe):"ads_manager"==e?Promise.all([t.e("main"),t.e("ads_manager")]).then(function(e){undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined,undefined}.bind(null,t))["catch"](t.oe):"publisher_dashboard"==e?t.e("publisher_dashboard").then(function(e){undefined,undefined}.bind(null,t))["catch"](t.oe):"content_widgets"==e?Promise.all([t.e("main"),t.e("content_widgets")]).then(function(e){t("./content_widgets.iframe.js")}.bind(null,t))["catch"](t.oe):void 0})},l.whenReady=function(e,n){Promise.all(window.webpackChunks.map(function(e){return l.loadChunk(e)})).then(function(){n()})},l.installPageProperties=function(e,n){window.Q.settings=e,window.Q.gating=n,i=!0,o()},l.assertPagePropertiesInstalled=function(){i||(s(),r.logJsError("installPageProperties","The install page properties promise was rejected in require-shim."))},l.prefetchAll=function(){t("./settings.js");Promise.all([t.e("main"),t.e("qtext2")]).then(function(){}.bind(null,t))["catch"](t.oe)},l.hasModule=function(e){return!!window.NODE_JS||t.m.hasOwnProperty("./"+e+".js")},l.execAll=function(){var e=Object.keys(t.m);try{for(var n=0;n=c?n():document.fonts.load(u(o,'"'+o.family+'"'),a).then(function(n){1<=n.length?e():setTimeout(t,25)},function(){n()})}t()});var w=new Promise(function(e,n){l=setTimeout(n,c)});Promise.race([w,m]).then(function(){clearTimeout(l),e(o)},function(){n(o)})}else t(function(){function t(){var n;(n=-1!=y&&-1!=g||-1!=y&&-1!=v||-1!=g&&-1!=v)&&((n=y!=g&&y!=v&&g!=v)||(null===f&&(n=/AppleWebKit\/([0-9]+)(?:\.([0-9]+))/.exec(window.navigator.userAgent),f=!!n&&(536>parseInt(n[1],10)||536===parseInt(n[1],10)&&11>=parseInt(n[2],10))),n=f&&(y==b&&g==b&&v==b||y==x&&g==x&&v==x||y==j&&g==j&&v==j)),n=!n),n&&(null!==_.parentNode&&_.parentNode.removeChild(_),clearTimeout(l),e(o))}function d(){if((new Date).getTime()-h>=c)null!==_.parentNode&&_.parentNode.removeChild(_),n(o);else{var e=document.hidden;!0!==e&&void 0!==e||(y=p.a.offsetWidth,g=m.a.offsetWidth,v=w.a.offsetWidth,t()),l=setTimeout(d,50)}}var p=new r(a),m=new r(a),w=new r(a),y=-1,g=-1,v=-1,b=-1,x=-1,j=-1,_=document.createElement("div");_.dir="ltr",i(p,u(o,"sans-serif")),i(m,u(o,"serif")),i(w,u(o,"monospace")),_.appendChild(p.a),_.appendChild(m.a),_.appendChild(w.a),document.body.appendChild(_),b=p.a.offsetWidth,x=m.a.offsetWidth,j=w.a.offsetWidth,d(),s(p,function(e){y=e,t()}),i(p,u(o,'"'+o.family+'",sans-serif')),s(m,function(e){g=e,t()}),i(m,u(o,'"'+o.family+'",serif')),s(w,function(e){v=e,t()}),i(w,u(o,'"'+o.family+'",monospace'))})})},void 0!==e?e.exports=a:(window.FontFaceObserver=a,window.FontFaceObserver.prototype.load=a.prototype.load)}()},"./third_party/tracekit.js":function(e,n){/**

Gibson Les Paul and Fender electric guitars can retail for several thousands of pounds, but electric guitars for beginners are available for less than £100. One example of a cheap electric guitar is the LA Electric Guitar + Amp Pack, which features everything a beginner needs to start playing the guitar right away for under £90.00. It includes a 15 watt guitar amp with 6.5" speaker for practising, a guitar lead, a strap, a padded gig bag, a set of spare strings, a pick and a 2-year warranty. The electric guitar itself has a neck made from maple - the most common type of wood used in necks - which helps to expand on the treble sounds of a guitar due to its hardness. The guitar is capable of producing a wide variety sounds, thanks in part to its 3x single coil pickups with a reverse wound middle pickup, which enables users to experiment with playing different styles of music.
At the core of this pedal is the Line 6 HX technology, which emulates the behavior of actual amp and stompbox components. This means that instead of merely copying the sound, it recreates the entire pedal or amplifier in digital format, allowing the models to respond to guitar tone and adjustments much like the real thing. While it originally had 70 effects, firmware updates have raised this number to 104, which is more than enough to keep you busy for months, if not years. Amp, cab and mic models were also increased to 115. Since Line 6 is well known for providing updates, it is reasonable to expect more expansions in the future. It does everything that the Helix LT can, with some extras, most notable of which is the LED scribble strips for labeling each footswitch. The Helix Floor also comes with expanded input/output options to work with mics and other instruments.
Bottom Line: The Line 6 HD500X is incredibly in-depth in the amount of options and editability it gives you. Doing all of it from the small screen on the actual unit is headache-inducing, but if you have a computer you can hook it up via USB and edit your sounds from there much more easily. There’s more of a learning curve with the HD500X than there is with the Zoom G3X, but the presets are decent enough and allow you to audition it if you’re the impatient type. Where the HD500X lacks is that it’s less of an immediate-gratification pedal, and it’s hard to tweak on-the-fly and come up with potentially inspirational sounds. Because of how the interface is, this is definitely more of a “sit down with headphones and tinker with it to get your perfect sound” type unit. If the effects quality of the Zoom G3X is a 7/10, the Line 6 HD500X is an 8.5/10. This is the one to get if you’re the type that likes to dig in and have control over every little thing. The price tag is a little on the high side, but considering what a powerhouse this unit is, it’s definitely not unreasonable.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: amplifiers","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"headphone guitar amplifiers","prop5":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop6":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop3":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}

Well, we are not part of the study! The study has been conducted, and he’s just giving you the results, it was written nowhere that you had to guess which wood was which or anything of the sort. This doesn’t imply that his little kid (cause this is his son’s science project, remember) performed any form of double-blind test, but still your remark is completely inapplicable and actually turns back on you, that make a big fuss about this article’s sloppyiness, only to attack it with wrong logical reasoning.
One of the quirkier instruments to emerge from the JMI/Vox operation in the 1960's (And that's saying something!) The Mando-Guitar never really caught on in a big way but remains a very cool and actually quite functional oddity. This is essentially an double-strung octave guitar; some describe it as an "octave 12 string guitar" but the strings are actually tuned in unison, not the octave arrangement of a conventional 12-string. The idea was to make an instrument that played in the mandolin range but was tuned as a guitar, as few of the Beat-era guitarists who were JMI's customers had a clue how to play mandolin! A few of the first Mand-Guitars were produced at Jennings' Dartford, Kent factory but the great bulk of extant examples were built by Eko in Recanati, Italy. With its small artist-palette shaped solid body and short 15" scale neck this is a very handy instrument, and with two Vox pickups has a fairly wide range of tones. There have been a number of similar instruments inspired by this design created in more recent decades, but the Vox Mando-guitar remains the original and coolest of all mini-guitar efforts.
By 2001, Michael Kelly Guitars added its first acoustic guitars and electric guitars. These collections have evolved and are now sold around the world. To this day, Michael Kelly remains focused on our vision statement to be "Built On Sound" and each time we put the cherry on top by giving the musician a bold look. We are proud that we do not offer the cookie cutter boring guitars that are readily available from so many brands. We know there are players that prefer classic simplicity and we very much respect that. However, Michael Kelly will continue to be the brand of choice for those that prefer something more boutique and unique.
The Hi Flyer guitar and bass would be offered pretty much until the end, in ’77. At some point after, probably around ’73 or ’74, the plastic logo was changed to an outline decal logo. Also, at some point the pickups were changed to the distinctive twin-coil humbuckers with metal sides and a see-through pink insert on top. These changes most certainly occurred by the ’76 catalog, when the Hi Flyers were available in four finishes – sunburst (U1815, U1815B), white (U1816, U1816B), black (U1817, U1817B) and a cool natural with maple fingerboard and black dots (U1818, U1818B).
Different types of guitars have different sound aesthetics, e.g. different colour-spectrum characteristics (the way the sound energy is spread in the fundamental frequency and the overtones), different response, etc. These differences are due to differences in construction; for example modern classical guitars usually use a different bracing (fan-bracing) from that used in earlier guitars (they had ladder-bracing); and a different voicing was used by the luthier.

Awesome amp. This one sounds awesome and is not ice picky like some I’ve Owened before. This one sounds awesome and is in great shape (see pics for condition, few drinks, but nothing noticeable u less u are super close). Unfortunately I am listing this and my Jonny marr Jaguar since I need cash. Will only sell one item. If my guitar sells, this will be unlisted
Hendrix, Van Halen and, uh, Mozart are the musicians to thank for most heavily influencing death-metal shredder Azagthoth, not that they really come through in the jagged riffs and cheetah-fast solos of Morbid Angel classics like “World of S—t” and “Where the Slime Live.” But that’s because he has blazed a tension-filled style all his own (when he solos, he enters a mystical mind state he calls the “Temple of Ostx”) that is finally getting more praise than early antics like cutting himself with a razor before hitting the stage and extolling Satanism.
Accompanying the Tempo guitar was the Merson Tempo Guitar-Amp. This was a tube amp with two instrument and one microphone input, heavy-duty 8″ Alnico 5 speaker, volume and tone controls, and a pilot light. The cabinet was covered in two-tone leatherette. The picture is in black-and-white, but the look is remarkably like Premier amps of the time, so a tan and brown color would not be a bad guess. The speaker baffle featured a classical guitar design (!) with “Tempo” written in little circles on the bridge! Substitute a lyre for the classical guitar and you’d swear this was a Premier, made by Manhattan neighbor Multivox, so that might, indeed, be the story there.
There are two different Vox Shadows (the Shadow made between 1060 and 1965 and the White Shadow made in the early to mid 80's). The Shadow is a double cutaway solid body with six-on-a-side tuner headstock,with 3 single coil pickups, the hardware is chrome, it has a white pickguard, tremelo bar with a retangular cover over the bridge with the VOX logo on it. It also has one volume and two tone controls and a pick-up selector knob on the lower cutaway bout. This is based on information from the 7th Ed. of the Bluebook of electric Guitars....Hope it helps...John
One glance at an El Dorado strap and you'll understand why so many musicians choose leather as their go-to pick for stage, studio or practice play. By combining sleek designer style with rugged, durable materials, these straps offer everything you need in a reliable accessory. And when you can keep your guitar secure while rocking out onstage, you'll be free to concentrate on the more important matter of dazzling your fans.

Pyle Pro’s PEGKT15SB package is the next step up. This guitar has more of a vintage feel thanks to its sunburst finish. Like the Silvertone above, it features 3 single coil pickups, two tone knobs, a tremolo bridge system, and a full-scale neck complete with a 22nd fret. Also included in the package is a Pyle Pro gig bag, a small 10-watt amp with cable, 3 guitar picks, a strap, and extra strings.
While you don’t have to mortgage your home to buy a good guitar, price will still be a key factor in deciding which guitar to purchase. When buying for a beginner—especially younger players—you may be hesitant to spend too much without knowing if the recipient will stick with the guitar. That’s perfectly reasonable. There are guitars to fit just about every budget. Just keep in mind that the better the guitar the new player starts with, the more likely they will be to continue learning and playing. An instrument that’s hard to play or won’t stay in tune will deter even the most enthusiastic beginner.
The best guitars?  Look at what the best players use.  Certainly Gibson and Fender are in the mix, but these are typically priceless, early production or highly customized one-off units.  If you want something more or less off the shelf that is in the same range of build, tone and feel quality look at the following (BTW, you can't get these at Guitar Center, which is probably why they haven't been mentioned yet):

Entwistle also experimented throughout his career with "bi-amplification," where the higher frequencies of the bass sound are divided from the lower frequencies, with each frequency range sent to separate amplifiers and speakers. This allows for more control over the tone, because each portion of the frequency range can then be modified (e.g., in terms of tone, added overdrive, etc.) individually. The Versatone Pan-O-Flex amplifier used a different approach to bi-amplification, with separate amplifier sections for bass and treble but a single 12-inch speaker. The Versatone was used by well-known bassists such as Jack Casady and Carol Kaye.
Make sure the notes you do want to play actually come out well-audibly. Good technique and dynamics go a long way here. Listen to your playing and take care that important melodic notes really come out, whereas accompaniment is often better subdued. Palm mute is useful so you can give notes a distinct loud attack without causing an indistinct muddle of cross-ringing notes. Also, make sure you play well in time and with good intonation.
It will take time to write and update all of the content at once. Come back regularly and I promise that there will be always something new for you to read, the list with essential guitar effects will be constantly updated. If you are just starting out, we recommend going through some online guitar training before you dive in the guitar pedals world.
Semi-acoustic guitars have a hollow body (similar in depth to a solid-body guitar) and electronic pickups mounted on the body. They work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Whereas chambered guitars are made, like solid-body guitars, from a single block of wood, semi-acoustic and full-hollowbody guitars bodies are made from thin sheets of wood. They do not provide enough acoustic volume for live performance, but they can be used unplugged for quiet practice. Semi-acoustics are noted for being able to provide a sweet, plaintive, or funky tone. They are used in many genres, including blues, funk, sixties pop, and indie rock. They generally have cello-style F-shaped sound holes. These can be blocked off to prevent feedback, as in B. B. King's famous Lucille. Feedback can also be reduced by making them with a solid block in the middle of the soundbox.
While it definitely looks unique with its four sharp edges and sculpted cutaways, this guitar follows conventional super strat design, starting with a basswood body that is joined to a maple neck. For its price, its quite surprising to find that this guitar features a neck through design, which is normally only found on more expensive electric guitars. The 25.5" scale neck is topped by a 24-fret rosewood fingerboard with a nut width of 1.65", providing a familiar shred friendly feel. Giving this guitar its metal friendly voice are two LH-150 Humbuckers that are hot enough for mean high gain metal tones.
So last week I wrote about if it made sense to replace the speaker in an amp, or if it would be better to just get a different amp, I'll bet some of ya saw this weeks topic coming, right?  Once again I must begin by stating that even though we design, build and sell pickups here, we will NOT offer biased information (I promise); remember, we are real-world guitar players too.  Yep, we also need to carefully watch how we spend our money lest we find ourselves without a roof over our head!  And I mean really, I could take being homeless ... but I'd NEVER do that to a good GUITAR! Shall we dive in?
Personally, I chose the Everlast version of Folsom Prison Blues because I find that the Everlast cover is so much more fun to play along with. The Everlast version is a little bit faster to play along with, but I think of a twelve bar blues while I’m doing the chord progression with this song; it really helps me to keep up and maintain a steady tempo.
Another factor to consider is the frequency with which you play. If you’re an occasional guitarist who plays just a few times a month and tend to play with a light touch, you may find less expensive strings perfectly suitable. On the other hand, if you’re devout about practice or play often and hard, premium-grade, heavy-duty strings may prove a better buy in the long run. Many manufacturers grade their strings according to their durability.
Shimming a neck: The best shims are one piece and the full size of the neck pocket. For this veneer from the hardware store works well. However, it is very hard to get an even taper on these. The next best option is to use masking tape. Masking tape is paper which is wood fiber so it's almost as good as a solid shim, and much better than the smaller shims which leave large gaps which impedes the transfer of vibration, and could cause problems later on. To make a tape shim, lay strips of tape side by side perpendicular to neck, and add layers to provide the taper. i.e. stripe 1- 1 layer, stripe 2- 2 layers, stripe 3- 3 layers. Place the neck in the pocket, mark outline of pocket, and trim just inside outline.
If you are a guitarist in search of an old-fashioned sound, then you might consider a vintage guitar amplifier. Whether you are interested in Fender, Silvertone, Ampeg, or others, vintage amps can help you recreate classic music with an extra layer of authenticity. From chiming clean tones to molten overdrive, you can find the make and model that will allow you to sculpt the tone you want and cut through the mix at your next practice or gig.
Hendrix, Van Halen and, uh, Mozart are the musicians to thank for most heavily influencing death-metal shredder Azagthoth, not that they really come through in the jagged riffs and cheetah-fast solos of Morbid Angel classics like “World of S—t” and “Where the Slime Live.” But that’s because he has blazed a tension-filled style all his own (when he solos, he enters a mystical mind state he calls the “Temple of Ostx”) that is finally getting more praise than early antics like cutting himself with a razor before hitting the stage and extolling Satanism.

Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All of our kits have a build difficulty rating to help you determine which kit is right for you.
Some Korean Ibanez serial numbers are purely numeric with no alphabetic characters. According to Jim Donahue these guitars were manufactured in the Cort factory, in which he had the supervision. Because they had no date stamps available when they started, the serials numbers of Artstar models in this factory were written by hand. These handwritten serial numbers are hard to decipher. The production of these Artstar models at the Cort factory was discontinued in 2003.
Make sure that only the notes you deliberately play actually sound. Guitar strings aren't isolated systems like the tone generators of a synthesizer; if you simply leave them open they may ring even though you've never actually played them. Always watch out carefully for such “rogue sympathetic vibrations” and make sure you properly stop strings that sound in unintended ways.

Guitar chords songs refers to songs that sound great when played using nothing but chords, whether on acoustic guitar, electric guitar, or both. These songs range from simple arrangements of rock, pop, and country favorites to more songs using more complex guitar chords. The arrangements you decide to play will probably be determined by how advanced your knowledge of chords is.
I personally could not play any of my songs as they currently stand on Amber and that influences my review a lot.  And while I like pushing away from open chords, power chords, and standard major/minor barre chords, I think a strumming/chord focused VSTs should be able to play a Cadd9/A with a capo on the second fret. That’s not even a complex or difficult chord to play (Guitar tab = 5x055).
Scott Knickelbine began writing professionally in 1977. He is the author of 34 books and his work has appeared in hundreds of publications, including "The New York Times," "The Milwaukee Sentinel," "Architecture" and "Video Times." He has written in the fields of education, health, electronics, architecture and construction. Knickelbine received a Bachelor of Arts cum laude in journalism from the University of Minnesota.
So what are acousticelectric guitars? Quite simply, it’s an acoustic guitar with slight modifications that means it can be plugged into a power amp. This means that the sound from the guitar can be made much louder for use live or with a band. It also means that, as the signal becomes electric, it can be altered with effects pedals and other equipment. Sometimes, because of this, electric acoustics are used when recording in a studio, though a microphone is often used too.
We would suggest that you don’t check price tags too much when choosing your guitar. If you try a few out in a music shop you can ask them to suggest a few different guitars within your price range and then try them out only thinking about sound, looks and feeling. This way you won’t be fooled by a cheap price tag to think that a guitar can’t be any good, or the opposite, be tricked into thinking that just because a guitar is expensive it has got to be the best.
Lastly try a fuzz pedal like a Fuzz Face or Big Muff. Fuzz pedals offer huge amounts of drive and low end but are generally used for single notes and power chords. Regular chords can sound pretty nasty with fuzz and it’s probably a bit wild for acoustic guitars. Although if it works with your style and draws the congregation into worship, then why not? The important thing is to be tasteful and selective in how, when and how much you use effects. Follow the golden rule; a little ‘salt’ can bring out flavour but too much kills the dish altogether.
The Gruhn Guitars repair shop has been world renowned for decades for its unrivaled expertise, skill, and respectful repair practices. Though our full-time staff of luthiers primarily focuses on repairing and restoring the instruments we make available for sale, beginning in 2016 we are also pleased to offer our repair services to loyal customers as an extended benefit of buying an instrument from Gruhn Guitars. Instruments purchased from Gruhn Guitars will be moved to the front of our repair queue and will be repaired at a discounted labor rate. As a sign of our appreciation for your business, Gruhn Guitars is here to help you for years to come to keep your instrument in the same prime working order as when it was listed for sale at the shop.
• We'll add EQ to give some polish and let the guitar cut through a little better in a mix. Enable a stage in the standard channel EQ (which comes after the inserts in the signal chain), and choose the Parametric II response. Add a boost of around 4‑5dB at 3.5kHz, with a Q of 0.2.This screen shows the VST Audio Channel Settings and the roster of effects used to create our basic guitar rack.
You may not have considered Orange Amplifiers before, but they’re a company with a history that dates back to the early days of hard rock. If you watch footage of rock bands from the 1960s you’ll see Orange amplifiers onstage almost as much as Marshalls. The British amp builder has had its ups and downs since those glory days, but today Orange is as strong as ever.
The Jameson Left-Handed Black is an acoustic-electric guitar that comes with a slick appearance, a smooth body, and an impressive sound. With its thinline frame and cutaway design, this model is good for both amateurs and seasoned guitar players. You get a guitar that sounds just as awesome regardless if you’re playing it unplugged or through an amp.
As we’ve shown here, a lot of relatively small—and inexpensive (many are practically free)—tweaks can hot-rod your tone and maneuver it to an array of differing ports of call. In some ways, it’s like tossing a handful of dice instead of just two—because the way small tweaks interact can lead to exponential changes in sound. For that reason, my advice is to take it slow and only make a single change at a time to understand what it delivers. Besides, it’s more fun (and less stressful) that way, anyway!
I bought my 10 year old son a digitech RP355 multi effects pedal to use. It's cheap and simple to edit patches for different sounds and you can download patches to get the sound used in some popular songs but the thing I like best about it is the amplifier emulation. After using it for a while my son found he liked the sound of Vox amps so we bought a AC4 and it sounds great. I liked the fender deluxe and bassman amps so I had a deluxe amp circuit built by a local amp guy. Later on you will find that you want to move on to real pedals as they sound better so a multieffects pedal is a good way to sample a lot of different effects in one package. Most multi effect pedals have a sampling function so you can record a short song segment and then the unit will replay it while you solo along. Some also have the ability to record from an outside source and then play it back at slower speed so you can learn tricky licks. Lastly, most units have drum tracks which is a great way to play along and stay on time.
Wholesale Guitar SymbolsWholesale Mahogany GuitarsWholesale Hollow Guitar EsWholesale Guitar Finger PicksWholesale Snakes GuitarWholesale Golden GuitarsWholesale Sunburst Hollow GuitarWholesale Custom Double GuitarWholesale Custom Shop Guitar 1959 Tiger FlameWholesale Ems Shipping GuitarWholesale Children's GuitarWholesale Fret GuitarWholesale Guitars LowWholesale Wood For GuitarsWholesale Red Active Guitar
Ovations reached the height of their popularity in the 1980s, where they were often seen during live performances by touring artists. Ovation guitars’ synthetic bowl-shaped back and early use (1971) of pre-amplifiers, onboard equalization and piezo pickups were particularly attractive to live acoustic musicians who constantly battled feedback problems from the high volumes needed in live venues.[citation needed]
 This Tempo guitar combo amplifier with tremolo and reverb effects is well-used, but still delivers great retro sound. If you're looking for genuine vintage guitar sounds, the Tempo delivers in a delightfully trashy way. The sound is twangy and clear, but you can overdrive the volume a bit to get a raw lo-fi sound perfect for garage punks, mod revivalists, surf rockers, etc. and This solid state amp was made by Japanese guitar manufacturer Tempo. It has three inputs, just like you'd expect from a late '60s - early '70s model. The temolo speed is adjustable from slow to fast, and though the intensity is not adjustable, it has a nice "just right" sound that's not too mellow or too choppy. The reverb sounds like a classic spring reverberation unit, and it gets the job done well. The cabinet measures 18 inches x 13 inches x 7 inches and houses one 8-inch loudspeaker. Check out the short video below to hear the Tempo in action and examples of the tremelo and reverb, both at maximum settings. Finding all of this great stuff for you guys has left me with virtually no free time, so please do not laugh at my years-out-of-practice playing style when you hear the sloppy Link Wray and Duane Eddy riffs...
I have 8 guitars and 5 Gretsches and I'm currently playing this one the most. It's very bright, which if you play a Martin you might not like. Like super duper bright. No really, brighter than that. But I like it. Unplugged it's good but not very loud, so it's a nice practice guitar, but you're going to want to plug in at the coffee shop or larger.
The Effect: Pedalboards are not guitar effects, but are an essential piece of equipment for every musician utilizing more than 2 or three pedals. Essentially, a pedalboard is a casing for guitar pedals, specially crafted to house a number of effects – typically ranging from 4 to 12. In some cases, boards come as just casings and it’s up to the player to sort out the electronic department and powers supply; in other cases, all the electronics are included in the mix and even cables are included. So in a nutshell, boards make your pedal use far more convenient and practical. In our opinion, they are an absolute must-have for any player who has more than two effects in use. For a first pedalboard I would recommend the Donner DB-2 as a great option.
The “Studio” model was introduced in 1983, and is still in production. The intended market for this guitar was the studio musician; therefore, the design features of the “Les Paul Studio” were centered on optimal sound output. This model retained only the elements of the Gibson Les Paul that contributed to tone and playability, including the carved maple top and standard mechanical and electronic hardware. However, the Studio design omitted several stock Gibson ornamentations that did not affect sound quality, including the binding on the body and neck. The two notable exceptions to this are the Studio Standard and the Studio Custom. Both models were produced in the mid-1980s, and included body and neck binding, though with dot fingerboard inlays instead of more ornate trapezoids. The first Studios from 83 to 86, except for Studio Standard and Studio Custom, were made with alder bodies rather than mahogany/maple. The current Studios come with a chambered mahogany body with either a maple or mahogany cap. The entry level Les Paul Studio “faded” has a chambered mahogany body and top and a satin finish and is the lowest priced Gibson USA Les Paul.
Throughout the 40’s, racial segregation was still in force across America, however within the music community, (both listeners and musicians) race boundaries were beginning to disappear. African American music (a.k.a ‘Race Music’) was popular with white communities too and with the vast melting pot of musical styles by that point including Folk, Country, Jazz and Delta blues, something exciting started to take shape.
I was lucky. Went into to a small local music store and they had it for a long time and were trying to get rid of it quick. Got it for about $800. The previous Rick 12 I had (with narrow neck) I bought for $400, fixed broken nut, then sold to West LA Music for $750 cash so I could get the Petty model. Transactions that were definitely worth it at the time.

As a new learner, the biggest reason for you wanting to begin with a full-sized guitar as opposed to a slender Stratocaster or a stylish Les Paul, has to do with your love for classic heavy rock tones. In this day and age, when you have scores of guitars with dizzying combinations of single-coil and humbucker pickups, along with complex toggle options, the Davison Full Size Black Electric Guitar keeps it really straight and simple. This is one of the few electric guitars that I’ve had the pleasure of reviewing straight out of the box, with hardly any setting required. And lest I skip the most important purchasing criteria here, you are not just buying a 39” electric guitar but a full-fledged Davison Guitar Beginner Starter Package. So you have a lot more going for that hundred bucks you spend, with a cool gig bag, strap, guitar picks as well as a compact amplifier and cable.
it is four solders on a guitar on say a les paul needs electricty so two wires pass the electricity through the other two wires are for your pickups the pickups electricity goes through the wires of them , into a potentiometer which is the technical name for the thing under the knob (or two depending on the guitars wiring) .... than into the 3 way and than finally passes out of the guitar and into an amp , pedal or tuner

The Jeff Beck Oxblood is available in limited numbers. The first 50 of these historic guitars were aged at Gibson Custom to look like Beck’s original, then signed, numbered and played by Beck himself. The next 100 guitars were prepared with Gibson Custom’s V.O.S. finish, bringing the total run to 150 instruments. Each one also comes with a standard Gibson Custom case.

One of my friend's first "good" guitars was a Lotus LP copy with a set neck. Your typical heavy brown 70s with a plain top LP copy but it had binding like a custom and real inlays. I helped him put dimarzios in it and we set it up. It was a pretty good guitar except for the color. His mother bought it new, and it was a medium priced guitar back then (not cheap really, it was $400 or so in the 70s).

{ "thumbImageID": "Ignition-Series-Vintage-Violin-Bass-Sunburst/511788000003000", "defaultDisplayName": "Hofner Ignition Series Vintage Violin Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Sunburst", "sku": "sku:site51389832990308", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "499.99", "priceVisibility": "1", "skuUrl": "/Hofner/Ignition-Series-Vintage-Violin-Bass-Sunburst-1389832990308.gc", "skuImageId": "Ignition-Series-Vintage-Violin-Bass-Sunburst/511788000003000", "brandName": "Hofner", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Ignition-Series-Vintage-Violin-Bass-Sunburst/511788000003000-00-60x60.jpg", "imgAlt": "" } ] }
Back in the good ol’ days, guitarists had to crank their amplifiers to eleven in order to obtain a nice and creamy distortion. Today, this is no longer the case. Thanks to overdrive pedals, you can basically drive every clean amp into overdrive – at any volume – and choose the amount of gain and shape the tone precisely as desired. The overdriven or crunch sounds are commonly used for rock, to slightly get that “breakup” clean tone or to play blues licks and solos. During the last two decades, guitarists found out that overdrive pedals are also perfect for boosting the crunch channel of their amps into total distortion – a technique often used during guitar solos, to give the sound that extra weight and girth – or, as with the famous Tubescreamer, to tighten up the bass response of the amplifier gain channel. The Boss SD-1 is a very popular choice for overdrive pedals, capable of great sounds. The legendary TS9 by Ibanez is also worth a mention – even considering that it’s available in Mini and Deluxe formats. And while we’re at it, why not give the Harley Benton Ultimate Drive a try? This little screamer can boost your amp into full overdrive at a very competitive price.

Jump up ^ Miller, Jim (1980). The Rolling Stone illustrated history of rock & roll. New York: Rolling Stone. ISBN 0-394-51322-3. Retrieved 5 July 2012. Black country bluesmen made raw, heavily amplified boogie records of their own, especially in Memphis, where guitarists like Joe Hill Louis, Willie Johnson (with the early Howlin' Wolf band) and Pat Hare (with Little Junior Parker) played driving rhythms and scorching, distorted solos that might be counted the distant ancestors of heavy metal.
One of the most versatile electric guitars we encountered when putting together our list is ESP’s LTD EC-1000 KOA. Koa is a Hawaiian wood that this guitars top is made from, and it has very special sound qualities. It makes the tone very bright, crisp and clear, but at the same time it’s full of life and depth. We immediately though that the sound reminded us of an ukulele or some other happy little stringed instrument, and the sound can easily bring us back to summer evenings around a camp fire.
The Neoclassical Speed Strategies for Guitar is another book we’d recommend more for the seasoned player. This one provides an excellent introduction into fingerpicking with helpful illustrations of exactly how to position yourself for the quickest and most efficient playing. It includes lots of helpful examples and exercises to make it easier to master.
I had this guitar handed down to me. It is in pretty rough shape. I think it is in good enough shape to restore to good condition/used shape. Before I attempt such a thing I would like to know more about the guitar itself. I know the history of Lyle and "Lawsuit" guitars so that part is done. The body has a cherry red finish with 2 "f" openings. The neck has had some stress on it, enough to have the wood lift a little on its grain pattern about 2 inches long from the nut to the fret board. I am not sure if injecting glue into this will keep the neck from breaking in the future. The fret board is loose at the nut but I believe I can glue it again. This is not the first restoration I have done. I have restored a flute and a grenadilla wood clarinet. Any comments regarding how to or if I am wasting my time will be welcome.
No, you’re right. The more I think about it, the more I see the attraction. Plus, I was wrong in my previous comment when I said the sides would sound the same up to the limit of the smaller cap. Because I think they’re be audible resonance differences between the two values. It’s the same reason why the scheme I’m discussing differs from a standard tone control. And I sound vague, it’s ’cause I am! One reason I’m eager to explore this …
You don't have to use plug-ins! Some synths such as the Virus TI have very flexible effects built in. You don't have to create audio effects in your sequencer. For example, I use the Access Virus synth, which features a simple delay effect, with the added bonus that all its parameters are available in the modulation matrix. One favourite trick involves routing velocity to the delay colour parameter. For parts that get brighter with increased velocity, it adds extra animation and bite if the echoes also get brighter. Unusually, the Virus also features four-way audio panning, so you can position an audio signal anywhere between the main stereo outputs and a second pair. If the second pair of outputs is routed to an external effects unit, you can play with the concept of moving a note around in a space, where its position also determines the treatment it gets. More fun can be had by modulating reverb time and colour via an LFO. The same LFO can then be used to control filter cutoff, EQ frequency and maybe wavetable position too (if your Virus is a TI). In this way, timbral changes happen at the same time as effect changes. Paul Nagle
In 1954 Pat Hare produced heavily distorted power chords for several recordings (including James Cotton's Cotton Crop Blues"), creating "a grittier, nastier, more ferocious electric guitar sound,"[36] accomplished by turning the volume knob on his amplifier "all the way to the right until the speaker was screaming."[37] Link Wray's 1958 recording "Rumble" inspired young musicians such as Pete Townshend of The Who, Jimmy Page of Led Zeppelin, Jeff Beck, Dave Davies of The Kinks, and Neil Young to explore distortion by various means.[38] In 1966, the British company Marshall Amplification began producing the Marshall 1963, a guitar amplifier capable of producing the distorted "crunch" that rock musicians were starting to seek.[39][40]
Get a ruler (or straightedge if you want to be all fancy) that is at least as long as the neck, but not so long that it reaches all the way from the nut to the saddles (and watch it doesn’t lean on the pickups or pickup surrounds either). If you can’t get one between these lengths, and are willing to sacrifice a ruler, get one that’s too long and cut it to length. Alternatively, you can just cut a little out of one edge so that you can still make full use of the other edge of the ruler. Now lay the edge of the ruler along the frets (don’t rest it on top of the nut, saddles, pickups or pickup surrounds).
eyelet boards. Today BYOC leads the way in DIY FX kits for guitarists. With distribution in Canada, Europe, Australia, Great Britain, and Asia, and over 25 thousand kits sold worldwide, BYOC is a leader in DIY effects. And our goal has not changed – to bring guitar players a product that is more than just some DIY effects project that merely “works”, but a complete stompbox that will rival or surpass any of the big name boutique pedals on the market today.
Arch top body 16" wide across the top, carved spruce top, back not carved by arched by braces, rosewood back and sides, f-holes, style 45 backstripe, bound ebony fingerboard, 2 white/black/while lines inlaid down length of fingerboard at the edges, abalone hexagonal fingerboard inlays on 8 frets (a few make with pearloid), vertical "Martin" pearl peghead logo, gold plated parts, sunburst top finish.
About the only thing that all these producers have tended to agree on across the board is that you should try to get your guitar sound as good as you can before you even think about recording. "The stupidest thing that any musician can do," remarks Tony Platt, "is to just plug in and play and say 'make that sound good'. It doesn't work like that. I will always say to the guitar player, for instance, 'Is that sound coming out of your amplifier the sound you want to hear? If it isn't, show me what it is and we'll try to get somewhere close to that before we even put a microphone on.' It's a waste of everybody's time to sit there tweaking stuff until somebody says 'Oh that's good.'"

Hey! I just opened up my 1984 g&l for the first time today and I found a design very similar to this. I had always loved the tone control on it but was too nervous to open it up for whatever goofy reason. I may try to draw it out and share it but maybe include a picture at some point as well. I’m glad someone else has looked at this because it definitely threw me for a loop when I first saw the two caps both headed to ground.

Our site has a wealth of information about what goes into making a Taylor guitar and how to make this very important decision. We have guides for how to find the right fit for you. Learn about the subtle differences in shapes and styles. Delve into different types of woods and construction, which are vital to the flavor and tone of an acoustic. Explore the Taylor line by series to find the look and style you want for your instrument.
Now, I'm sure that you're all sensibly busying yourselves with making music, so your lives are, frankly, too short to be sifting through more than a half a million words of interviews. Therefore, I'm going to try to digest what I've discovered during this process for the benefit of those less sad than me! I'm not about to dictate which technique is 'best', though, because if reading this many interviews has taught me anything it is that people will always disagree on what constitutes a great sound. Instead I've recorded a number of different audio examples to allow you to judge for yourselves, just as I did, which techniques are likely to make a real difference to your own productions. I've peppered this article with a number of boxes giving details of these files.

The pre-amplifier section of a guitar amplifier serves to amplify a weak instrument signal to a level that can drive the power amplifier. It often also contains circuitry to shape the tone of the instrument, including equalization and gain controls. Often multiple cascading gain/clipping stages are employed to generate distortion. Because the first component in a valve amplifier is a valve gain stage, the output level of the preceding elements of the signal chain has a strong influence on the distortion created by that stage. The output level of the guitar's pickups, the setting of the guitar's volume knob, how hard the strings are plucked, and the use of volume-boosting effects pedals can drive this stage harder and create more distortion.
There’s 2 very small and cheap amps that are widely used by guitarists and by guitar technicians across the globe and the Marshall MS-2 Micro Amp is one of them. The other is number 2 in our list, before you ask… This tiny 1-watt Marshall amplifier may fit in the palm of your hand, but it sure packs a punch and is a LOT louder than you’d expect. Styled just like the classic Marshall amplifier stacks now synonymous with rock n roll, this is one of the best cheap amps thanks to its convenient size, 9V battery powered operation for ultimate portability and the fact you can plug your guitar into it and rock out anywhere you like.
In 2013, Gibson introduced the Government Series of Les Paul, SG, Flying V, Explorer and ES-335 guitars which were constructed solely of tonewood the US government seized but later returned to Gibson after the resolution of the company's Lacey Act violation in 2011. The guitars were finished in "government grey" and also featured decorations which intended to draw attention to the issue of government. A year later in 2014, Gibson released the Government Series II[77] of guitars, which were essentially the same as the first series, only finished in a new color: "government tan".
So far so obvious, right? But what's easy to miss is that this same scale shape also gives you A major and D major - they are the same chord shape, just starting on different strings. Now it's true that they're not quite the same physical shape, but that's just because of the funny little tuning 'kink' between the G and B strings (See Why is the guitar tuned like it is?). Once you iron that out, E, A and D are the same shape, as are the barre F and B chords.
There’s been a steady evolution in effects signal processing since the 1940s. Guitarist-innovator Les Paul was among the first and most avid effects developers, experimenting with echo and multi-track recording to add sonic excitement to his music. The first foot-switched effect showed up in the late ‘40s with Harry DeArmond’s Trem Tol tremolo processor that was later used by Bo Diddley. In the 1950s and early 1960s other effects were developed, but they tended to be expensive and some had operational issues. Meanwhile amplifier makers such as Fender and Gibson were building reverb and tremolo effects into their amps. These tube amps also produced tasty distortion and overdrive effects when gain and volume were cranked up to maximum settings. Today, many effects are designed to reproduce those sounds.

For experienced players, you already know what kind of questions need to be brought up when purchasing a guitar. For beginners, a great starting point is to look at what your favorite guitarists play. By taking your own musical tastes into consideration, you can narrow down your choices to models that will provide the tone and sound you already know and love. But whatever you're looking for, you can be certain that the perfect guitar for you can easily be found, right here. Just take a look around and see for yourself.
I think jackson (particularly the USA models) are truly the most versatile of all the high end electric guitars. The build quality is second to none as they are made at the custom shop by very experienced luthiers, the woods used are exotic and tonally superb. The hardware is the best around Floyd rose/ Seymour Duncan's and the action/playability is fantastic. All in all you feel although expensive, you feel like you're getting your monies worth. But the great thing is that they produce an incredible array of sounds which covers all aspects of musical style from the beefed up classic grind of a Gibson, to the stringy percussive violin sounds of a start and everything in between. The USA ones are expensive but I have 2 (an sl 1 and sl 2) and given the enjoyment and reliability they have given me, they owe me nothing.
The war over an electric guitar's tonewood, like the Princess Bride sword fight, has ranged all over leaving a wake of havoc whenever it's brought into a conversation. It's brought a few too many guitarists to the brink of insanity certainly. Regardless, everyone has an opinion about it and when the Internet comes into play, the world weighs in too.
I want to focus on acoustic guitar but some electric is alright. Mainly I want to build up a repertoire of songs that MOST people will know if heard and be able to sing a long. Currently I know very few songs such as this but I have been playing off and on for years. Any really popular (old or newish is fine) songs that are not impossible to play would be great. Thanks!
The Yamaha FG830 uses a well-engineered combination of woods to create a solid body and neck suitable for pro-level performance. You simply cannot go wrong with this guitar; the workmanship of this guitar is a cut above other acoustics in its class. Owners love the gorgeous dreadnought sound, describing it as rich, resonant, and well-rounded. One satisfied customer boasted that in a room full of acoustics, his Yamaha would “float to the top” of the din.
Six slot-headed Classics were offered. The 133/8″-wide GN50 Standard ($65) had a yellow spruce top and mahogany neck and body. The 141/4″ GN60 Concert ($79.50) featured yellow spruce top and Brazilian Imulawood body. The 143/4″ GN70 Grand Concert ($99.50) sported yellow spruce and figured Brazilian fruitwood. The 15″ GN80 Auditorium (4109.50) was the same as the GN70 but with 4″ X 403/8″ dimensions. The 141/4″ GN90 Concert featured yellow spruce top and Brazilian rosewood body, with extra binding. The 14 1/2″ GN100 Grand Concert ($169.50) came in yellow spruce, Brazilian rosewood and ornate inlays. Cases were extra.
One type of "effect" I've thought would be useful to have in a multi-pedal, though I've not seen it, would be to have a configurable automatic gain control (level compression) which would be applied before a distortion effect, followed by a gain adjustment after the distortion which would undo some or all of the effect of the previous AGC. For example, things might be set up so that playing at a level of -20dBm would boost the signal by 21dB (clipping slightly) and then reduce volume by 20dB, while playing at -10dBm would boost by 12dB (clipping a bit more) and then reduce by 12dB. – supercat Apr 30 '13 at 22:01
{"pageName":"[gc] pdp: in store vintage vintage 196s decca dmi 27 1 pickup sunburst solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";112131968;;;;evar65=null-Guitars-In Store Vintage","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}

: : I have a Vox Shadow that's sunburst, white pick guard that surrounds 3 solid chrome face pickups and the middle pick up has "VOX" engraved in it. 3 seperate volume controls and a master volume control. Tuning keys are all chrome, and the green decal on the face of the headstock reads Shadow, JMI Dartford, Kent. Neck is attached withthe help of a chrome plate, on the back side of the 'plank' body is an access plate for the jack that states made in England. Guitar also has the original roller/tremelo tail piece with palm lever. The numbers of 64728 are stamped on the back side of the headstock just below the tuning keys. Finish is beginning to crack a bit but it's all original, right down to the volume pots that have to be cleaned from time to time. It must be a rather unknown line that Vox had as I can't find out much on it either. Had this guitar for many years. Was handed to me in pieces in an old 'cardboard' case, (that has since gone away) put it back together and added it to my "music room".
Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.

Gibson guitar are among the best in the world, but they can also be a little expensive. You can go with an Epiphone, but Gibson always has a few good options under the $1,000 mark as well. If you love the idea of owning a Gibson Les Paul but you’re struggling with the cash part of it, check out the Les Paul Faded. A little while back I grabbed the 2016 version and it’s been a fantastic guitar with the tone and feel of a Les Paul, minus the big price tag.
After the wah or EQ, try throwing in your phasers, flangers, chorus or vibrato effects. Because they’re following overdrive/distortion, wah and EQ, you will find that modulation effects gain a richer and more complex sound than they would have on their own or toward the front of your chain. But annoyingly, putting them right at the end of your chain can also be somewhat limiting because these types of effects tend to overpower others that go before it. Modulation effects work best right in the middle of the effects sequence.

I thin Yamaha LL16 is one of the best acoustic guitar on the market . Yamaha is known for making affordable, quality guitars, and this is one is no different. It features a solid spruce top, solid rosewood back and sides, and an ebony fretboard. It is smaller than the dreadnought guitars – a fact that is neither good nor bad but that does affect the way the instrument sounds and feels.

Nicknamed - "Papa-Papa". DADDAD is common in folk music (Irish, Scottish), and for the execution of a rhythm guitar in "heavy" (alternative music) on 6th on the third string at the same time. To reach the tuning from DADGAD, Open D or Open D Minor, the G string is dropped to D so that the 3rd and 4th strings are tuned to the same pitch. DADDAD tuning is sometimes used on Dobro guitars for rock and blues. Notable users of this tuning include Billy McLaughlin and John Butler.
The second issue of the Les Paul guitar was introduced to the public in 1954. Called the Gibson Les Paul Custom, this entirely black guitar was dubbed the Black Beauty. The Les Paul Custom featured a mahogany top to differentiate the instrument from its Goldtop predecessor’s maple top. It also featured the new Tune-o-Matic bridge design and a pickup with an alnico-5 magnet, P-480, in the neck position. In addition, since 1957, the Custom was fitted with Gibson’s new humbucker pickups, PAF,[16] and later became available with three pickups instead of the more usual two. The three pickup model retained the standard Gibson 3-way switch so not all pickup combinations were possible. The neck and bridge-only settings were retained, but the middle switch position was set to enable the middle and bridge pickups. A common modification was to restore the standard neck/both/bridge switching combination and add a switch to enable the middle pickup on its own.[citation needed] The guitar is wired as a “normal”2 pick up Les Paul except there is a master volume , master tone, (for front and back pu) while the middle pick up has its own volume / tone. this allows the middle pu to turned out of the circuit or mixed with the other two. allowing many different tones.
Featuring classic Fender design, smooth playability, and simple controls, the Squier Classic Vibe Telecaster '50s is a great first electric guitar. The fixed bridge and quality tuning machines ensure simple and reliable tuning stability—a potential frustration for new players trying to learn on poor quality guitars. Single volume and tone controls along with two bright-sounding single-coil pickups give the beginning player a wide range of tones that are easy to control. The Telecaster has been a mainstay in music for decades and is especially associated with great country, pop, surf and rock sounds.
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.
The tremolo effect is a fluctuation in the guitar signal’s volume. By lowering and then raising the volume of the guitar you get a very cool effect. As you adjust the rate of the volume change you get faster fluctuations in volume. Tremolo is one of the early effects found on some  guitar amplifiers, though it was often mislabelled "vibrato." Vibrato is a variation in pitch, not volume. 
AGE CAN’T HINDER YOU – Working off of muscle memory and visual assistance, ChordBuddy is designed for players of every age. In fact, ChordBuddy is well-suited for those looking to play guitar with arthritis, offering a pain-free method of playing your favorite song. Utilizing ChordBuddy also allows you to learn the guitar on your own, eliminating the need for long guitar lessons with an instructor, which can result in prolonged joint pain.
This is worse than the Rolling Stones magazine’s list. Paco De Lucia, Django Reinhardt, Andres Segovia, Sabicas, Wes Montgomery, Joe Pass, Jeff Beck, David Gilmour, Jimi Hendrix, John Williams (no, not the movie score composer) IMO the top ten. It’s much harder to play jazz, flamenco, and sometimes classical, than it is to play blues or rock. These guitarists are all infinitely greater than Jack White, John Frusciante, Tom Morello, or John Mayor.

There is one drawback though, rather than signal that they might want a little more gain, too many players simply grab their volume knobs without warning. (the “sandbagging” I referred to previously), or kick in an overdrive pedal they “forgot” to check during SC. What sounds good for them onstage can send the audience running with bloody ears, Techs running for the backup cab cables, and lawyers sharpening their fangs. A little gain in their monitor, becomes multiplied by the power of the FOH. Sometimes it is a thought to let them blow out an amp speaker, rather than a bank of FOH speakers!
Why does the material matter less than with an acoustic guitar? Because the body of an electric guitar is much less important in producing and amplifying the sound; all it really has to do is hold the strings so they're long and tight enough to make the kind of sound frequencies we want to hear. Although resonance still plays an important part in giving an electric guitar its tone, solid-body electric guitars generate most of their sound through an entirely different process from acoustic guitars. In fact, even though acoustic and electric guitars look similar, and you play them in a broadly similar way, they are quite different instruments.

“The California Series captures the true meaning of a Fender acoustic guitar,” said Billy Martinez, VP Category Manager – Acoustics and Squier Divisions. “From the iconic 6-inline Stratocaster headstock to the original Fender body shapes and organic styling, everything about these guitars is uniquely Fender making them the ultimate tools for artistic creative expression. Whether you’re at the beach or rocking out with a band on stage, we’re offering players of all levels a chance to express their own creative style, standing out in the crowd with the bright colors and energy these guitars give off.
Lastly, we have the bread and butter of Schecter’s mid-range selection. Schecter Omen Extreme-6 is one of their oldest and most popular models to hit the market. This guitar brings a decent balance of price, performance and build quality. While it’s not as fancy as the previous models we have mentioned, as soon as you pick it up you know it’s made for serious business.
The value of the guitar will also be an important factor that will contribute to the overall score – because spending $200 on a model that sounds like a $2000 guitar is always something that can’t be ignored! We rate the best acoustic guitars and the best bass guitar list in the same way. With every new model we add and review, we update the top 10 rankings.
Which brings us to this 1985 DT-250. While it sports the tail notch, the shape is a little more sleek and diminutive than the comparable Dean ML. The lower front bout is extended to be almost symmetrical with the diagonally opposite bass wing. The treble-side lower bout is shortened, giving the whole guitar a tasteful offset-X shape… X Series. To add dimension to the shape, Fuji Gen Gakki added “crystal cuts” to the edges, basically code for angled bevels.
Fender Montara acoustic electric with HSC. Part of the California series made in the early 90's. BEAUTIFUL guitar! See pics. I would describe it as being in excellent condition for its age. Of course there are some minor signs of use upon very close inspection but nothing that jumps out. (2 small dings are shown in pics) All electronics work, could probably use some new strings. If you have any questions please ask!
You can use similar two-mic techniques, minus the effects, on a single amp to capture a variety of larger-than-life guitar sounds. One trick that I stumbled upon involves miking a twin-speaker amp with two mics that are close in response, but not matched (see Fig. 1). The first time I tried this, on a session with guitarist Paris Slim, I used an Electro-Voice RE20 and a Sennheiser 441.
Being part of Schecter's upper tier guitar line, this one comes packed with premium appointments, including a nice looking arched quilt maple top that follows the double cutaway shape of the mahogany body. It also has a 3-piece set mahogany neck that can withstand angry riff playing while the ultra access heel allows for easier upper fret access when you want to hit your audience with high note solos. The guitar has a Sustainiac Humbucker on the neck (known for long sustained notes) and the high output EMG 81 Active Humbucker that's great for metal riffs. Other features include Floyd Rose 1000 Series Tremolo, 25.5" scale length and 1.625" nut width.
When considering the guitar from a historical perspective, the musical instrument used is as important as the musical language and style of the particular period. As an example: It is impossible to play a historically informed de Visee or Corbetta (baroque guitarist-composers) on a modern classical guitar. The reason is that the baroque guitar used courses, which are two strings close together (in unison), that are plucked together. This gives baroque guitars an unmistakable sound characteristic and tonal texture that is an integral part of an interpretation. Additionally the sound aesthetic of the baroque guitar (with its strong overtone presence) is very different from modern classical type guitars, as is shown below.
I dont know but im looking for a good bass guitar too. Depends on your price range. Personally I realy like Ibanez basses and think they do really good low to mid price range basses. If you are looking at a professional quality basses you should look at Rickenbacker, Musicman (stingray), Fender, Lakland and Shadowsky as they are the main brands for professional basses.

Jackson is a well-known guitar manufacturing company that was set up in the year 1980. Jackson guitars are considered as among the best guitars on the planet. Their guitars are known for its slender and refined layouts. Jackson guitars are also popular for their typical pointed headstock. The Jackson JS32 Kelly RW is an electric guitar which has won the hearts of many owing to its stylish design and great sound quality. When it comes to the sound quality of the guitars, Jackson is the best guitar brand to have.

The Fender Blues Junior III has quickly become an industry standard amplifier for those chasing that coveted creamy Fender Blues tone. You have 15 watts of pure tube warmth in an easily transportable package and gorgeous sounds emanating from the 3 x 12AX7 preamp tubes and 2 x EL84 Power tubes. A perfect amplifier for small gigs and practice rooms as well as those in need of a quality amp to record with.
It also includes a -6dB/oct low-pass filter that’s built into the plugin’s tube/valve modeling equation, and can imitate a lower-quality tube triode.  There’s a switchable output saturation stage, which can be used to overdrive the output signal and all the standard Voxengo plugin features, such as full multi-channel operation, channel routing and built-in oversampling. It’s great for guitars and for dirtying up sounds such as vocals, drums or synths.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]