Every new 2008 Les Paul Standard will benefit from Gibson’s proven chambering technique, which leaves each guitar with perfect tone, balance, and weight. Prior to gluing the maple cap on top of the mahogany body, the expert craftsmen at Gibson USA carve out carefully mapped-out chambers in the body using a Computer Numeric Controlled (CNC) router. The positioning of the routes was established after careful examination of the resonant characteristics of the Les Paul. Gibson approached this process with the awareness that every change to the formula would have repercussions on the instrument’s sound. So, in addition to relieving the stress on a player’s back and shoulder, these lighter Gibson guitars also enhance the tone palette in a manner unique only to these guitars. The results are comfortable, lightweight guitars that are acoustically louder, with increased sustain and resonance.
went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back.
5 Star...So fun...I bought the playstation 4 for my wife for Christmas it came with the game uncharted 4 I'm surprised my wife played it and loved it so when she seen the uncharted the Nathan drake collection it has 1 and 2 and 3 on it she had to have it she started playing it and she loves this game also...great games to have for that special moment when you are in the mood for a journey.Few games have that replay ability when you get to know Drake you just can't put it down great deal great price only problem why I gave it 4 Stars there is no incentive or discount if you have already purchased it for Ps3 and now you would want it for your Ps4 but as I said great deal great story great price
I've gone into a fair bit of detail here, which may be baffling to some, or may be old news to others, but I hope it cleared some of the common misconceptions about certain parts transforming tone that I have discovered in my time doing this! Truth is, upgrading your wiring is a really worthwhile modification to carry out. Replacing parts with quality components, of reliable build quality and accurate tolerances and ratings will simply be the best for your guitar. You may well see a tonal improvement afterwards which each customer of mine has reported back after fitting one of our harnesses, which is lovely to hear. But approach with the right facts, approach without the mystique of 'this vintage style pot will transform my tone' and you'll be pleasantly surprised I'm sure! There's no magic to a responsive, great guitar tone. 

While there's nothing necessarily wrong with plonking your mic right at the centre of the speaker cone if it gets what you're after, a lot of producers take the time to experiment with different positionings off axis, where the sound is typically warmer. Mike Hedges: "Depending on where you have [the mic] — outer speaker or inner speaker — you get the difference in tone from the edge of the speaker and the centre of the cone." In fact, Mike Clink also tries small changes in position even when working with basically on-axis sounds. "I'll point [the SM57] exactly dead on, though I might move it an inch or two to get the right sound."
To answer your question directly, yes, but only from a strictly physical point of view. According to guitar enthusiasts, electric units are easier to handle than their counterparts. The main motif for this has to do with the fact that the acoustic models come equipped with what many describe as heavier gauge strings. Because of this feature, their strings are more difficult to pick and press down.
It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.
Description: Body: Mahogany - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: HoneyBurst, Green
Austin-based John Grammatico is building some of the best amps available, and with his current range of products he’s managed to capture the spirit of legendary vintage amps while utilizing modern reliable components. The LaGrange is a small 15 watt amp that will sound great with either single coils or humbuckers. Expect a warm, woody sound with throaty mids and bell-like highs. The sound is transparent, harmonically rich and well worth the investment.
Washburn is an EXCELLENT brand. I have owned an N4, 2 N2's, and their latest, cheapest Nuno model for my daughter. My daughter's guitar is amazing for the price I wish I had such quality for my starter guitar. I would put my N4 up against ANY guitar- period. Plus, whenever I have contacted the company, they have top notch customer service. I know this isn't about amps, but I wrote them about an issue I had with my Randall amp ( a division of Washburn). Without me asking, they mailed me an amp part with an apology. Top notch.
The HX removes the amp modelling and condenses the rock-solid build, intuitive user interface and neat form-factor of the Helix series into a svelte multi-effects box that will fit on a Pedaltrain JR with room to spare. As on the larger units, editing is highly intuitive. Lightly touching a footswitch opens the edit menu for that patch, with the large rotary and left-right buttons used to switch patch and parameters. More complex functionality like editing signal flow isn’t far away from the user - a couple of clicks through the menu gets you there, and makes creating banks of your own a breeze. In terms of sounds, the same high-quality effects from the flagship units are present and correct, with a number of additional effects that have been developed in the meantime. The drives on offer are excellent, and into a small tube amp we also found the boosts allowed us to drive the amp into saturation, or up the ante for soloing. With a real drive in front, the unit was able to keep up, and the interaction between external drive, HX and amp was close to indistinguishable from stacking two real drive pedals.

The biggest issue when starting out is not to get any bad habits with picking or hand/finger positioning. I'd highly recommend to find a teacher who - not necessarily on a periodical basis - would take a closer look at your progress and technique and make adjustments when needed. There are lots of bad habits that you can get and I'd rather spend some money on lessons than weeks of lifetime to undo those.
Drop A in D standard variation - A-G-C-F-a-D: Used by Mastodon on most of their first album (Remission) and on some songs on other albums. Also utilized by Periphery on the song "Zyglrox" as well as "Alpha" and "The Bad Thing." Also used on occasion by Black Label Society, who previously tuned it a half-step up, which Alter Bridge also utilizes on some of their songs such as "Broken Wings", "Come to Life", "I Know it Hurts", "Still Remains", "Breath Again", and "All Hope is Gone." Creed, Architects, and Sevendust all use this tuning tuned a half-step down on their songs "Bread of Shame", "Early Grave", and "Home" and "Chop" respectively, with the latter also tuning down a full step for the songs "Death Dance" and "Not Today". Danish industrial metal band Raunchy used this tuning tuned one and a half-step down (F#-E-A-D-f#-B) on the song "Dim the Lights and Run" from the album A Discord Electric. Wage War also utilize this tuning one whole step down for songs like "The River" and "Spineless" off their album Blueprints.
When two or more speakers are used in the same cabinet, or when two cabinets are used together, the speakers can be wired in parallel or in series, or in a combination of the two (e.g., two 2x10" cabinets, with the two speakers wired in series, can be connected together in parallel). Whether speakers are wired in parallel or in series affects the impedance of the system. Two 8 ohm speakers wired in parallel have 4 ohm impedance. Guitarists who connect multiple cabinets to an amplifier must consider the amp's minimum impedance. Parallel vs. series also affects tone and sound. Speakers wired in parallel slightly dampen[s] and restrain[s] them, giving what some describe as "tighter response" and "smoother breakup". Some describe speakers wired in series (usually no more than two) as sounding "...looser, giving a slightly more raw, open and edgy sound."[26]
Roger McGuinn's sparkling, chordal 12-string Rickenbacker riffs on the Byrds' early hits were the sonic bridge between folk and rock – and an irreplaceable color in rock's palette: Every indie band who's more interested in beatific strumming than screaming solos owes him a debt (the striking break in "Bells of Rhymney" could be on a Smiths record). McGuinn could do a lot more than chime, however, as demonstrated by his still-astonishing psychedelic-raga-Coltrane licks on "Eight Miles High."
In the image above, the first higher peak we see is E4 (i.e. the low E-string on a guitar in standard tuning), the second peak is E5 (i.e. an octave higher) and the following high peaks are B5, E6, G#6, B6, D7, and so on. Remember that the test rigs only have two strings, both tuned to E, and plucked open. So what you are hearing is a mish-mash of tons of overtones that shape the character of the “tone” that you hear.
The sound blew away guitarists when units first popped up in guitar stores. If the dizzying harmonic swirl didn’t just make you puke, it really sent you tripping. Interestingly, many tired of it a lot quicker than they did the phaser’s subtler, less imposing “swoosh”, and consequently it’s difficult today to name a fraction as many great guitar tracks with flangers slapped all over them as with phasers. For the latter, we’ve got the Stones’s “Shattered” (or just about anything from Some Girls), the Clash’s “Lost in the Supermarket” from London Calling and loads from Sandinista, and heavier rockers from early Van Halen to recent Foo Fighters. In the flanging corner, we’ve got The Pat Travers Band’s “Boom Boom, Out Go The Lights” and… well, I’m sure there’s another somewhere. Okay, maybe the intro lick to Heart’s “Barracuda” redeems it some.
Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  250K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.  Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
If you feel that you must attempt a setup on your own, and you have a suitably worthless guitar to work with, then there are a few pieces of advice that you should know. When adjusting the truss rod on any guitar (this changes the bend or warp in the guitar neck) you want to move in small, one quarter or less turns. Over-tightening the truss rod will lead to a back-bend which can permanently destroy your guitar’s neck. Loosen the rod to bring it from this kind of a bend to flat. From there, you will want a slight amount of sag in the guitar neck to allow the strings room to vibrate. Intonation on an electric guitar is achieved by making sure that the pitch of the note when a string is struck open matches the pitch of the note as struck at the twelfth fret of that string (one octave higher). If the note at the twelfth fret is higher, the string should be slightly loosened at the bridge (achieved by moving the saddle towards the neck). The opposite is true for flat sounding notes at the twelfth fret. It is best to use a high quality tuner when intonating an electric guitar.
Then I remembered Kent Guitars. I thought it would be pretty cool to have a guitar with my last name on it. Although they didn't appear on the U.S. west coast very often, if at all, (I would remember them if they did), It turns out there is a whole crapload of them out there. Information is scattered around the internet in bits and pieces and nobody who was making them at the time is talking about it. So I have started gathering information, limiting myself to the 500,600,700, and 800 series models. The only ones I am interested in owning are the 700 and 800s. I have a 740, an 820, 823, 833, and 834. I may never get the chance to buy another.
I own some 13 or so, high end American, Canadian and/or Japanese 6 strings 7 basses and a full studip of gear and if my opinion means FA then I can't help but not mention my Washburn Custom Shop WV548! It has Parker guitars (famous for the FLY) patented composite glass carbon fiber fretboard, EMG active PU's (81, 85) and a real Floyd with the Buzz Feiten system and it is bar none, the fastest, smoothest, and by far the nicest playing (and sounding for that matter) guitar I own or have played in my some 30 odd years plus, playing electrics.
Join the "Cigar Box Revolution"! This La Vox Cigar Box Electric Guitar is built from a decidedly uptown-looking round box. Neck-through construction means it is heavier than most cigar boxes, and it performs more like a standard electric guitar. Play some raw, smokin' blues, back-alley funk, or whatever else wells up from deep down inside.  More details...

This is like asking, how long is a piece of string? There are more brands than can be counted. This is because the factories in the east that produce mass production instruments often change name, and will label the same instrument with different labels depending on which market it is going to. Then there are the individual luthiers, small companies, large companies, toy shops hobbiests. The answer to this therefore would have to be infinite.
OCTAVACIÓN (FAT20) Cada una de las silletas está provista de un tornillo de bloqueo para impedir todo movimiento. Para ajustar la octavación, afloje el tornillo de bloqueo de la silleta con una llave Allen de 2 mm. (D) Para ajustar la octavación, introduzca una llave Allen de 2,5 mm en el tornillo de la silleta situado en la parte posterior del trémolo.
The Effect: Vibrato effect, often mistaken for a tremolo, is the type of guitar effect that alters the pitch of your signal. The result is very similar to that which you get when you operate the tremolo bar on your guitar. There are different types of vibratos out there, but the most common division is between analog and digital units. Analog vibratos are known for their clarity and organic feel that comes from analog pitch shifting.
Along with sweep picking, economy picking serves a more economical way to play single note ideas. It’s a form of alternate picking that calls for you to sweep the pick across strings when making your way to the next adjacent string. If you’re ascending, you sweep down and vice versa. They key is to make the motion have the same resistance sweep picking calls for while still utilizing a fluid alternate picking wrist approach. Just like most techniques, but with the same emphasis as sweep picking, you must start out slow and be mindful of the technique when starting to learn it. Be patient and work at it. It will come, and when it does – look out!
I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.
He revolutionized music by combining two different guitar styles who were begging to be played together, blues and country. It was through this courage and confidence that Berry was able to convey his slick attitude that made everyone stop and listen. Sadly, however, even though his lyrics and performances were positively received, the artist himself did not have as positive a reception. He was said to be quite hard to get along with… but that didn’t stop his band swinging along. A sign of complete trust in what they were achieving together.

• Brute force game : Offers the same realistic engine that can be found in STRUMMED ACOUSTIC 1 and 2 – ideal for chord accompaniment. It also contains riffs and a new game mode by picking Picking: just play a chord for creating very convincing arpeggio patterns. Reproduction of these new types of patterns should be completely familiar to users of STRUMMED ACOUSTIC.
Thanks to these affordable guitar kits, you can now build your own guitar without having to craft body parts from wooden tables and planks. Unlike Brian May and his dad, who built the iconic "Red Special" guitar from wooden tables and planks - all you have to do is order a guitar kit online, and you are free to assemble and customize as you prefer. These guitar kits reduce the skill and cost requirements of guitar building considerably, making for great entry points into lutherie and guitar modification.
A hard-tail guitar bridge anchors the strings at or directly behind the bridge and is fastened securely to the top of the instrument.[20] These are common on carved-top guitars, such as the Gibson Les Paul and the Paul Reed Smith models, and on slab-body guitars, such as the Music Man Albert Lee and Fender guitars that are not equipped with a vibrato arm.
I own a v100 gold top modified to fit regular humbuckers and boy it is great. I have played it with gibson lps and it holds it own. Not as nice really but damn it sounds great. I have an SG too but have never played an SG before this guitar. I am weirded out by the light body. Are they all like that? I know they are all neck heavy but this seems out of order. I do like the sg though more every time I pick it up.
The key to capturing any kind of ambient tracks is a good reverberant space, although a narrow or dead room can also work, as long as there is sufficient distance between the guitarist and the amp. I usually put the air mic at least ten feet from the amp, positioned off-axis, or in an omnidirectional pattern to pick up as much reflected sound as possible. Placing a baffle between the guitarist and the amp will increase the apparent room size, as will making the amp sound pass through a doorway or turn a corner into another room.
A phaser pedal is similar to a chorus as it thickens up your sound but also adds a sweeping effect – almost as if the speaker within the amplifier is spinning around or moving up and down. If you pretend the speaker is moving away from you and moving closer and back again – you’ll get an idea as to how it sounds. You can change the length of the effect and how quickly the movements are via the pedal.
The 700-series models were solid-body instruments while the 800-series models were hollow bodied. This is a small enough product range to make a nice little collection and the guitars are made well enough to be used. (Many of the early Japanese guitars were cheap and simply unplayable right out of the box. I know... I had one.) However interest in them seems to be rising and thus, prices are following along.

Some types of wood that were commonly used in the 1950s are close to extinct today, and can no longer be used for mass production. For instance, import and usage are restricted for certain types of Mahogany, Rosewood, and Ebony, and large guitar manufacturers in the US have been raided by the justice department on suspicion of using illegal materials.


TRUE. Tommy can be good but I find he has a lot of filler and some overly fluffy tunes sometimes. It makes it sound like he’s trying too hard to play it with as many different chords as possible before finally landing the first note. (which is usually late). and for clapton below me I could agree but I think Jimmy Page’s playing is just as good but he’s more reckless. he’s reckless for good reason though, it’s like he’s transfering his feeling to it like Jimi Hendrix would but Page’s guitar sounds like your heart wanting to rip out of your chest to claim your biggest desire once and for all. The kind of vibe when you finally realize your in love after a LONG time of dullness. Jimi is groovy, and Clapton likes to serenade seeming like an old gentle man from any age.
Some effects, and the boxes that produced them, altered musical periods beyond recognition. The valve-driven Watkins Copicat, for example, will forever be associated with the sound of the late 1950s British music “beat” scene. Developed by Charlie Watkins in 1958, this odd machine supported a tape-recording mechanism that would record and play back any sound with varying lengths of delay in-between the replay heads. The device was critical to the rockabilly sound of the late 1950s, the “beat-group” sound of The Shadows, and the Liverpool Merseybeat scene of early 1960s (as well as the Birminghambeat, or Brumbeat scene). The sensation of hearing a guitar warble and wail to its own output encouraged guitarists to experiment with different styles of attack and vigor. For example, the noise that begins and ends the original 1962 recording of “Telstar” by the Tornados was made using the Copicat by creating a loop of echo and reverb effects. This produced what can best be described as some sort of space-echo/attack-helicopter noise.

CP = manufactured by ???; some speculation is that CP stands for Cort Plant or that models with this designation were made by a partnership of Cort and Peerless or perhaps even that it indicates production at Cort's Indonesian plant which is known as Cort PT (although this last possibility seems highly unlikely since the instruments are marked as "Made in Korea"). (2003–2008)
The Salamander Grand (Yamaha C5) has by nature so many velocity samples that it already has a great expressive sound. I have normalised the samples and re-attenuated them to suit sf2 format and simplified it by leaving out some pedal noises and other non-critical sounds. Cut-off frequencies have been adjusted for extra expression and using Wavosaur I have removed the gaps at the front of the samples to greatly reduce latency.

Solid state amps have many advantages: they are cheaper, lighter, and require less care than a valve amps (which eventually will need new valves, for instance!). Vox, Line 6 and Hiwatt make really good solid state amps that you can gig with without worries. They are not necessarily "worse" amps. The Rolling Stones, Status Quo and many other big acts have used solid-state amps at some point. They're also quite popular with jazz guitarists.

Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.


A way to increase the usability of the sound acquired this way is to wire a capacitor in series with the pickup that has its electric polarity reversed. This filters out that pickup's lower frequencies and thus preserves the corresponding frequencies from the other pickup. The resulting sound is fuller and stronger, yet still different from the standard in-phase combinations, resembling the sound of a "cocked wah" (a wah-wah pedal set in a fixed position). The capacitor used for this is usually in the 20–100 nF range.[23]
Pitch correction/vocal effects: Pitch correction effects use signal-processing algorithms to re-tune faulty intonation in a vocalist's performance [96] or create unusual vocoder-type vocal effects. One of the best known examples of this is Autotune, a software program and effect unit which can be used to both correct pitch (it moves a pitch to the nearest semitone), and add vocal effects. Some stompbox-style vocal pedals contain multiple effects, such as reverb and pitch correction.
Around ’77 or so (since the new shape was similar to the Magnum basses), with sales embarrassingly bad, Ovation took some Deacon bodies and added new contours, carving a dip into the top curve and adding angles. It didn’t help. The Breadwinner was officially axed in ’79, with the Breadwinner loosing its head in ’80, although the market had long passed them by.
The Quantum pickup configuration of H-S-H offers a wide variety of tones, and since this isn’t a Telecaster, having a humbucker in the neck position is especially nice, I find. That single coil in the middle should be used more as a coloring device on selector positions two and four than as a straight-ahead choice. Augment the natural fullness of the humbuckers with a little jangle from the single coil and you’re in business.
Ibanez is a Japanese music instruments manufacturer that has produced some of the most iconic guitars of the 20th century. Established in 1908, the company started to design the first guitars in 1957. Ibanez was one of the first companies to gain popularity in the US and Europe markets. It also was the first to mass-produce 7- and 8-string guitars.

Optocoupling Compressor using a LED and a LDR. Similar to Colorsound Supa Sustain or DOD 280. As others have mentioned, instructions are a single photocopied sheet showing component layout. There's no mention that you'll need a piece of heat shrink to fab up your optocoupler. If you have some experience you can figure it out. Wire was not supplied.

it's really hard to beat the ric sound. the 335 12's and fender 12's are cool, but really the ric has the sound we're all familiar with. that being said, everyone has different tastes and I encourage you to play as many different ones as possible. Jimmy Page used a Fender 12 on Stairway. I went rick for that early beatles sound. the neck is tiny but it's part of the instrument.
At that time European craftsmen operated under the guild system. The guitar (in its modern form) was a relatively new instrument, and most guitar makers were members of the Cabinet Makers’ Guild. The Violin Makers’ Guild claimed exclusive rights to manufacture musical instruments. The Violin Makers’ Guild filed appeals on three occasions – the first in 1806 – to prevent cabinet makers from producing guitars. Johann Martin is mentioned in a surviving submission dated 1832.
And how does adding a pedal, basically one more optional pre-amplification stage that you can turn on or off at your leisure, make somebody less “real”? Imagine some old-school guy is just using guitar to a (insert amp brand)? Great! I love them too. Which one? Ah, nice amp! Did they know that amp has one more gain stage than that amp over there? If I plug into that one while they play theirs, did I make them less real or genuine, or did I become SUPER-real? Are they going to start fading like Marty McFly when the outcome is in doubt at the end of Back To The Future? Will they spring back to life and start playing “Earth Angel” properly once I unplug?
First of all we have to make special mention for the build quality of the RP500. It has a cast-metal chassis and vacuum-style footswitches like on an actual stompbox, and it just feels like it’s built better than any Line 6 or Boss multi-effect we’ve tried. On the rear of the RP500 you’ll find a ¼” input for your guitar, stereo output, headphones jack, AUX in, balanced XLR stereo out, and a USB port. A power supply is included, so points for DigiTech over Boss for doing users that courtesy. A look at the front panel layout reveals it’s pretty unique. It doesn’t have the side-by-side stompbox look we love so much in the Zoom G3X, it has fewer knobs than the Boss ME-80, and yet it looks more straightforward to use than the Line 6 POD HD500X. The dimensions and weight are almost exactly the same as the Boss ME-80 (about 20 inches wide, and weighs approximately 8 lbs).
{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
The OO-18E was basically the small-bodied OO-18 acoustic with mahogany back and sides, spruce top, and the ring-mounted DeArmond tucked right at the end of the fingerboard. These featured one tone and one volume control, with large two-tone plastic knobs situated down on the lower treble bout. The first prototype was serial number 166839. OO-18Es were produced from 1959 to 1964. Around 1,526 of these were produced.
What if you don’t have a music shop nearby and need to order a guitar online? Our recommendation is that when you have read through our list of the best guitars, select a few that you’re interested in, and look them up on YouTube. There you can watch (and listen to!) great reviews where you can hear the guitar be played and get someone else’s opinion on it. Try listening to the different guitars directly after each other so you can determine which one sounds the best.

I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar. I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best. You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment. You get treated like a valued customer. Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars. They have a great variety of quality instruments. Plus, they have some really cool, unique guitars. A place like this is so rare nowadays.
Featuring a small scale neck, the Squier by Fender Mini Strat Electric Guitar comes with three single-coil electronic pickups, with solid and intuitive master volume and tone control. The neck of the guitar is made of C-shape maple wood design, whiles the rosewood fretboard holding the strings and containing dot markings is designed in a manner that makes it easy to strum.
Steve is the best. He made time for me to come in and talk about the problems I was having with my electric bass. When I got there, he knew exactly what was wrong with my bass, and he adjusted it quickly and perfectly. He also gave me a lot of incredibly useful information about what he was doing and why. I could not recommend Steve Morrill more highly.
Most newbie guitarists want a small amp that sounds good but doesn’t cost too much. The amps listed above are that and more. However, there are some guitar players who mean business from the beginning, and won’t want to waste time on small beginner amps when they have the resources and ambition to grab an intermediate or pro-level amp. If you know you are going to stick with playing guitar, and if you can justify it in your budget, that’s not a bad idea.

A noise gate is a very handy device that gets rid of hums and hisses that may become apparent when you're plugged in but not playing your instrument. Basically a limiter in reverse, the noise gate simply cuts out sounds below a preset level. As long as you're making music your sound is full on; but as soon as you stop playing, all the noise generated by your effects chain, vintage amp, and/or house wiring is silenced.


Taylors have a "happier" sound and I like the feel of them. I am a novice but from what I have seen for a beginner with an acoustic guitar, they felt and sounded warmer and less tinny than the laminated wood ones. A good rosewood taylor isn't on the cheap side of things but it feels like you can play better than you can. And the model I looked at had strings that were nice and close to the frets so you didn't feel like you were pushing in deep like the keys of an old typerwriter. Go into a Guitar Center or somewhere you can actually feel what you are getting before you buy anything. I got a cheap Gibson online less than a month ago and got what I paid for when it came with the bridge completely missing and a brassy sound when it was played. Buy your stuff in person. I think that Gibson is probably still a good brand, but the quality control of the cheaper models they put their name on is something I might question from my first experience with them...
The first Hagstrom electrics actually came to the U.S. beginning about 1959, carrying the Goya name imported by New York’s Hershman (Goya acoustics were made by Levin, also in Sweden). These were the now-legendary sparkle-covered hollowbody “Les Pauls” with the modular pickup units. However, while the Goya acoustics continued on in the ’60s (eventually to be distributed by Avnet, the owners of Guild in the late ’60s), the Hagstrom electrics took on their own identity and switched to Merson. The first Hagstrom I guitars were the little vinyl-covered mini-Strats with the “swimming pool” pickup assemblies – basically two single-coil pickups mounted in a molded plastic assembly looking like its nickname, with sliding on-off switches and the Hagstrom fulcrum vibrato (which was also used on early Guild solidbodies). These were followed by similar wood-bodied Hagstrom IIs, then the quasi-SG Hagstrom IIIs in the ’60s. Hagstrom electrics continued to be imported by Merson through most of the ’60s, but by the ’70s distribution had switched to Ampeg, which was responsible for the Swedes, and several thinlines, some of which were designed by Jimmy D’Aquisto. Hagstrom hung around until the early ’80s before disappearing.
You didn’t think we would forget bass amps, did you? Due to their inherent differences in design, bass guitars require a dedicated amplifier – using your old Fender Champion isn’t going to cut it. Bass amps offer more power, with some outputs reaching 1000 watts or more. Like guitar amps, bass amplifiers come in many shapes and sizes – including heads and combos – although the mid-range Hartke HD500 offers a stage-worthy 500 watts of power in a portable combo unit, with great controls and an excellent balanced tone.
Glen Campbell; DJ Ashba, Melissa Etheridge, Nikki Sixx, Mick Thomson; Kaki King, Steve Lukather; Marcel Dadi, Ray Davies,[30] Roy Harper,[31] James Hetfield, Josh Homme, Cyndi Lauper, John Lennon, Country Joe McDonald,John McLaughlin, Yngwie Malmsteen, Bob Marley, Ziggy Marley, Stephen Marley, Roman Miroshnichenko, Maury Muehleisen, Dave Mustaine, Vince Neil, Jimmy Page, Richard Daniel Roman, Shania Twain, Boz Scaggs, Luis Alberto Spinetta, Statler Brothers, Cat Stevens, and Aaron Tippin;[30]
Now, you may be wondering if there are things to love about Guitarist and there certainly are. The GUI is incredible and simply one of my favorites around. And if you need funk or jazz rhythms fast, then this is your guy — the auto-wah feature saves this plugin. The more you put realism out of your head and strive for interesting tones, the more you’ll like Guitarist.
Effects such as chorus, phasing, flanging and pitch vibrato are created using pitch modulation and, except in the case of vibrato, the modulated sound is added back to the original to create the effect. The pitch modulation is generated by delaying the signal by just a few milliseconds, and then modulating the delay time, using a low frequency oscillator (or LFO). For vibrato, this is all that needs to be done and, because the delay time is actually very short, the effect is perceived as happening in real time. The other effects, however, generally rely on an equal balance of the dry and modulated signals to achieve the strongest effect, so it is easier when working with plug-ins to adjust the wet/dry balance using the plug-in controls, rather than adding the wet only signal via a send/return loop. As a rule, these effects aren't very processor-intensive so, if you're working with plug-ins, you can probably afford to insert as many as you need into track or bus insert points as required. Stereo versions of these plug-ins may generate different modulated delays for the left and right channels to create a more dramatic spatial effect.
Martin began with a 000-size guitar, which had 12 frets clear of the body. They rejected the 27" scale idea, as this would have been impractical since the high string tension on a guitar would have made the instrument hard to play. Instead they used a 25.4" scale length. To accommodate Bechtel's request for 15 frets clear of the body, they squared the body's shoulders to add 1 5/16" to the clear part of the fingerboard. This allowed 14 frets clear of the body. Since they felt aesthetically the bridge should remain halfway between the center of the soundhole and the endblock, there really was no way to make the guitar have 15 frets clear. The bottom bout was reshaped slightly to match the new shape of the upper bout (note when the 000 went to 14 frets in 1934 it retained this initial OM body shape).
Most people think of Roy Orbison as the super-smooth crooner who sang songs like “Crying,” “In Dreams” and “Only the Lonely.” But Orbison was also a wicked guitar player, who ripped out several impressive solos on early Sun Records singles like “Ooby Dooby.” In fact, Sun owner Sam Phillips was more impressed with Orbison’s guitar playing than his singing during the early days of the rocker’s career.
Last Update Sept 22nd, 2018 Electric guitars are those that have an amplification feature. You can connect your guitar to a power source and amplify the sound produced onto a loud speaker. They are normally a perfect choice for stage performances and bands. Below are brief reviews of 10 best electric guitars in India, which are among the best in Indian market. These best electric guitars were curated by our experts according to their popularity, reviews and ratings by people across India.
What makes the wah so timeless is its versitility, it can emulate a human voice, be a rhythmic device, boost a screaming lead, a tone shaping tool, among other uses.The first known commercial recording of a wah pedal is Cream’s “Tales of Brave Ulysses”. As we know the distinctive sound caught on with just about every guitar player on the planet! There are too many uses of the wah to mention here, almost 50 years later it is still a must have pedal for every guitarist. For an in-depth look at wah history and a great read please check out “Analog Man’s Guide To Vintage Effects”.
Need a portable pedalboard for fly dates? Tech 21 has the answer in the form of the Fly Rig 5: a small but perfectly functional pedalboard, powered by an auto-switching adaptor, so it can be used anywhere in the world. What you get is the equivalent of five stompboxes. The SansAmp is at the heart of the Fly Rig. Stomp on its footswitch and its six mini control knobs light up blue. You get level and drive knobs, three-band EQ and a spring reverb emulation based on the Boost RVB pedal. In front of the SansAmp, you get the Plexi section, based on Tech 21's Hot-Rod Plexi pedal. One footswitch emulates the natural overdrive and distortion of a late-60s Marshall, with sound dialled in with level, tone and drive controls. A second 'Hot' footswitch brings in up to 21dB of boost and can be used independently of the Plexi distortion. Last in the signal chain is the DLA, a delay with tap tempo. The Fly Rig 5 is an extremely functional unit that contains arguably the most essential effects - you can plug it into a guitar amp or straight into a PA or mixing desk. It's also a life-saver should your equipment go down at the last minute, as well as being the answer to the prayers of guitarists who need to travel light.
This guide is as marvelously written as it is exceedingly informative. It takes a long look at each of the major and minor American guitar companies — Gibson chief among them — and recounts the story of every guitar to come off their workbenches. Buoyed by scads of historical photos and thoroughly researched copy, this book earns its place at the top of this list.
The GE-7 Graphic Equalizer is good to have after the overdrive in case you want to use it to scoop mids or bump certain frequencies for solos. (To show that these are not hard rules, it also works pretty well if the EQ is after the compressor but before the overdrive. But this changes how the EQ sounds, since you would be distorting it with the overdrive, so try it in the suggested position first.) Also, it’s good to have the EQ before the noise suppressor, since EQs can add noise as they boost tone at various points in the frequency spectrum, including any noise that is already there.
The Firebird did have some other unique features such as its banjo style tuners and mini humbuckers that produced a different sound than the full humbucker pickups Gibson typically offered.  Many notable players preferred the Firebird: Mick Taylor from the Rolling Stones used it on the album Exile on Main St.  Allen Collins would also use this axe on stage with Skynyrd alongside his Explorers.  The great Texan blues guitarist Johnny Winter was known for playing slide on his 1963 Firebird to great effect.  Dave Grohl, of Nirvana and Foo Fighters fame, used his white Firebird to create a modern rock sound.
I have been playing for two years. I use to play (and still have) a fender squier. Today I bought a Lyle on impuls. I wasn't planning on buying one, i just walked in and it looked so beautiful. I have a feeling it is about 10 years old or so, but the sales man didn't know much other than it was a Lyle and it had new tunning pegs on it. I got it for 150$ and i would REALLY love to know more about it. Thanks.

This guitar is one of the more affordable left-handed variants that you will find on the market. With a 41-inch body and a full-scale, you won’t find any limitations to the music you wish to play. The body is 3 inches thick which not only makes it comfortable to hold but also play. The cutaway gives you good access to higher frets while also increasing the appeal of the guitar.


The structure of the lessons are good, it varies between guitar technical stuff and theory as you progress, meaning that you won't get bored of any single topic, and you'll have a chance to try out the theoretical bits one step at a time. It's a shame they never made newer editions of this book with more graphics and supplemental audio-video tools.
The first thing to do is to cut out a piece of copper foil slightly larger than the bottom of the electronics cavity.This way the edges of the foil will go up the sides of the electronics cavity a bit. Next cut out strips of copper foil slightly wider than the depth of the cavity, and form them along the sides. When you are finished, it should look like the photo on the left.
2) The neck edges at the fret board are not rounded and tend to be rather sharp which can really start to hurt your hands if you play for awhile . Typically this is where guitar companies skimp on their budget models and Yamaha didn't disappoint. But it's an easy fix for a Luthier who will just take some sand paper and sand down the sharp edges and dress the end of the frets if needed. Also, its an easy fix for someone with a steady hand, good eye, and a women's fingernail file. It took me about 10 minutes to round the neck edges with a fingernail file and it didn't even require touch up paint thereafter as the fret board is solid wood and the same color all the way through. She feels like a dream now and I can play all day long without the sharp neck edge digging into my hand, and my hand just glides ever so smoothly up and down the neck as it should.
T3 (2009) – The T3 shares the same body styling as the T5 with some electronic and structural differences. It is a semi-hollow-body because it has a solid center block in the body. It comes standard with a quilted maple laminated top, and has and electric style bridge. The electronics include multiple humbucker pickups, coil splitters, and push-pull tone and volume pots. The T3 is available with the optional Bigsby vibrato in the T3/B.
The Boss MS-3 is a multi-effects pedal that is not meant to replace your favorite pedals, rather it is meant to help you make better use of them. It has more than enough effects (112) for most musical applications, but what makes it special is its old school approach that lets you incorporate pedals and amps into your rig, along with its built-in effects.
I skimmed ahead and quickly realized that, at last, someone has written THAT GUITAR BOOK that we are all looking for when we start out but that no one seems to have written yet but that you hope to write someday when you finally figure out what you are doing so that you can help others and prevent them from wasting so much time and money and hopes....(takes a breath)
As we mentioned before, the first mass-produced solid body electric guitar was introduced in the early ‘50s as a way for guitar players to avoid getting that unwanted feedback that amplified hollow body electric guitars were infamous for. Today, there are countless solid body guitars to accommodate any type of player and price range—from beginner guitar players to seasoned pros playing genres spanning hard rock, country, blues, heavy metal, jazz, and more! Some of the most popular solid body electric guitars include the Fender Telecaster, the Fender Stratocaster, the Gibson Les Paul, the Gibson SG, the Ibanez RG, and the ESP Eclipse.
×