Being in the entry level section of the market, the Blackstar ID:Core Stereo 20 V2 is meant to be an all-in-one practice rig complete with amp modeling and effects. But what makes it stand out is the use of two 5" speakers for a fuller stereo sound, which complements the amp's versatile voicing features. Speaking of voicing, this amp is loaded with 6 essential tones to play with, two variations of clean (warm and bright), crunch (normal and super) and overdrive (OD1 and OD2), which by themselves are enough to play most musical styles. But being from Blackstar, this amp is equipped with their ISF (Infinite Shape Feature) knob that lets you fine tune the voicing of the amp to your preference. In addition, the ID:Core Stereo 20 V2 comes with 12 built-in effects, covering essential modulation types, delays and reverbs, all of which add up to a portable amp that gives you a lot of tone options.
The word distortion refers to any modification of wave form of a signal, but in music it is used to refer to nonlinear distortion (excluding filters) and particularly to the introduction of new frequencies by memoryless nonlinearities.[32] In music the different forms of linear distortion have specific names describing them. The simplest of these is a distortion process known as "volume adjustment", which involves distorting the amplitude of a sound wave in a proportional (or ‘linear’) way in order to increase or decrease the volume of the sound without affecting the tone quality. In the context of music, the most common source of (nonlinear) distortion is clipping in amplifier circuits and is most commonly known as overdrive.[33]

The music industry is one that has really felt the effects of the digitalization of the world over the last few decades. In the 1970s and '80s, recording, composing and production work would have been done manually with a complicated series of hardware mixers, synths, sequencers and other devices. Today, all you have to do is plug into a computer running the music software that's relevant to the task. These programs and tools don't only make it possible for you to work faster; you can also get started sooner, since a large selection of software packages are available to download directly. You won't need to wait for shipping: just download and start working.

I took lessons with him when i was 8 years old. I stopped taking lessons when i was 12 years old. In those four years i have learned so much about guitar in such a little time. Patrick is an amazing teacher and by the time i left his teaching, i joined 4 bands and played at the whiskey twice, the house of blues four times, and the grove once. All amazing experiences and it all started from Patrick. I am 16 now and i will never forget what he has done for me. If you are thinking about eventually taking on guitar at all, Pat is your man.


The Jeff Beck Oxblood is available in limited numbers. The first 50 of these historic guitars were aged at Gibson Custom to look like Beck’s original, then signed, numbered and played by Beck himself. The next 100 guitars were prepared with Gibson Custom’s V.O.S. finish, bringing the total run to 150 instruments. Each one also comes with a standard Gibson Custom case.
If you prefer to pay monthly you can get started with $19.95. To take advantage of this offer follow the link below and key in your email address. I suggest that you wait until you receive an email from Guitar Tricks. You should get a username and a password. Use these details to logon to the site. Once you are inside of Guitar Tricks select the Upgrade button and choose the Monthly Membership option.

You might have read our review about the C40 GigMaker kit from Yamaha earlier on. This is a similar guitar, but it’s the C40II, and the black color makes it a limited edition instrument. The inlay is less “traditional” looking. Instead of an ornate “rosette” style, the inlay is a stripe pattern all the way around the sound hole, making the guitar look somewhat “jazzy,” to use a more descriptive term. So if this is the look you prefer, read on for more details.
Controls were volume and tone. A little elevated pickguard sat on the upper treble bout. The earliest examples of these had the little plastic logo on the head. By ’71, these had changed to an outlined block letter decal logo. A fretless version was also available by ’71. The U1970 with frets, and fretless U1970F, were both $220 with case. How long these were available is uncertain, but they were probably gone by ’73 or ’74.
they're both excellent guitars, and for jazz-only, and a little more money, the eastman was a little better. it had a bit more acoustic volume and sounded really killer plugged in. but, the godin is the one i ended up keeping. really, really versatile guitar. the tone knob has a wide range of usable tones. really a very articulate sounding guitar plugged in, especially with the tone a little more open. i play a lot of straight ahead jazz on it, and am very happy with the sound. i have always played it with 12 gague strings on it. again, it's not terribly loud unplugged, but the sound is great, and this is designed primarily to be used plugged in.
The Fender Mustang II V2 40w Guitar Amplifier Combo is an extremely versatile modelling amplifier that comes complete with 8 amp models, 37 effects, and 24 onboard factory and user presets. So, you’ve got a huge amount of different sounds to play with! It’s like having 18 amplifiers in one easy to carry box all pumping out through a powerful 1 x 12” fender Special Design speaker – great for gigs and studio use!

In March when the Cut interviewed Fabi Reyna, the editor-in-chief and founder of She Shreds, a magazine for female-identifying guitar players, she commented on men insisting she listen to the guitar heroes we’re all allegedly mourning. “I was talking to a dude at a big company recently and he asked me if I’d heard of this band, which was, of course, a band of all dudes,” she said. “I was like, ‘Sorry, I don’t know much about male guitar history, and I don’t really care to. Don’t tell me or ask me about these bands because I just don’t know them.’”
A very good option in the budget pedal market. Comes with a great number of effects to combine for solid sounds. Virtually all the factory pre-sets are worthless and are sort of demonstrations of what the pedal can do. But you have plenty of user saves and setting up good tones is straight forward and simple. The tuner in this and my handheld one never agree. Someone is lying!
The following open-tunings use a minor third, and give a minor chord with open strings. To avoid the relatively cumbersome designation "open D minor", "open C minor", such tunings are sometimes called "cross-note tunings". The term also expresses the fact that, compared to Major chord open tunings, by fretting the lowered string at the first fret, it is possible to produce a major chord very easily.[14]

Gibson’s offerings also differ from Fender in that they largely employ scale lengths of 24.75, resulting in a warmer, more rounded out sound that has come to characterize the brand’s output (3). Playability is also affected by the shorter scale length size, with reduced tension making string bending a bit easier. Gibson’s generally utilize mahogany in their construction, which contributes to a darker tone with increased sustain and warmth.
Yet another awesome 6 strings right handed electric guitar. The body is finished in solid basswood while the neck has a bolt on . The fingerboard is made of rosewood with 22 frets . It mostly comes in  black colour. It is quite affordable, with prices ranging from INR 9,071 depending on various market factors. you can click below to get more product details such as offers available:
got my dad's guitar after he passed away. its electric solid wood has a tone knob and volume knob next to the cord plug in and two little black slider buttons. I don't know anything about guitars but it only has one marker on the back its on the silver plate and it just says Japan in all caps. there is no brand name on the headstock or anywhere else on the guitar that I can find and I've looked at over many times.

Austin-based John Grammatico is building some of the best amps available, and with his current range of products he’s managed to capture the spirit of legendary vintage amps while utilizing modern reliable components. The LaGrange is a small 15 watt amp that will sound great with either single coils or humbuckers. Expect a warm, woody sound with throaty mids and bell-like highs. The sound is transparent, harmonically rich and well worth the investment.


American Fenders and USA Gibsons are not NOT for beginners! They are for people like myself who have invested 15+ years into developing the skills required to defend a purchase of one. IF you want beginner guitars, go see Mexico Fenders or Epiphone Guitars. Better yet, worry more about your skill and not which brand in on your headstock. I played for 11 years before I upgraded my Epiphone to a Gibson.

I found a Decca guitar lying in my woodworks shop at school, and my teacher let me take it home. My friend and I have been restoring it, and we nearly have it finished, the only thing missing is the tremolo spring. However the model of the guitar is kind of odd as we have not found any record of what type of guitar we own. Its a double cut-away archtop, with a tobacco sunburst and 3 single coil pick ups. We have looked everywhere and haven't been able to find any record of a 3 pick up Decca guitar. We're still looking...
Ever since Christmas Day 1967,I have been trying to find out who made my MIJ guitar I got as a gift that year.Today I found out who made my little Dover when your excellent book came in the mail.I was always puzzled I’ve never seen another Dover and despite many inquiries to guitar mags-nobody else had heard of the brand either.Back in 2009 I sent several pix of my whole collection to Vintage Guitar Mag-they only printed on pic,and that was the one with the Dover-even though there were several others that I thought were more historically significant.The guitar looks like a 3/4 size attempt of making a Jazzmaster copy as it had the strange Meito plastic pickups with the 6 little chrome triangles where the pole pieces usually go.I noticed that Sakai Mokko also made Sears guitars and that really clicked with me as my mother worked at Sears in Toronto at the time and that’s where she bought my Dover.I will try to send some pix your way.

All six strings are made from nylon, or nylon wrapped with metal, as opposed to the metal strings found on other acoustic guitars. Nylon strings also have a much lower tension than steel strings, as do the predecessors to nylon strings, gut strings (made from ox or sheep gut). The lower three strings ('bass strings') are wound with metal, commonly silver-plated copper.

You are bidding on a previously owned and in good playing condition Breedlove Atlas Series AD25/SM acoustic electric guitar. This auction is for the guitar and case you see pictured. No battery is included. Nothing else is included. It comes as pictured. Please take a moment to look at the pictures and get a better idea of what you are bidding on. There is a nick on the face of the guitar (see picture 3 for a better look). This guitar has scuffs and scratches from use. It could use a good cleaning. The electronics have been tested and are in good working condition. The neck is straight and the frets have plenty of life in them. The guitar is in good playing condition. Please take a moment to check out my other great items! Thanks ccloan.


Repetitive open-tunings are used for two non-Spanish classical-guitars. For the English guitar the open chord is C major (C-E-G-C-E-G);[67] for the Russian guitar which has seven strings, G major (G-B-D-G-B-D-G).[68] Mixing a perfect fourth and a minor third along with a major third, these tunings are on-average major-thirds regular-tunings. While on-average major-thirds tunings are conventional open tunings, properly major-thirds tunings are unconventional open-tunings, because they have augmented triads as their open chords.[69]
People sometimes don't really know what they want and use other brands of amps. They haven't found their sound yet and kind of trying other stuff or heard someone or some artist talking of using it and try. But that is not good enough and then they try a Fender. With a Fender you can create your own sound whether you are using pedals or just using the amp and the guitar. A true wonder for every player. Fender's just the best

The valvetronix XL-series builds on the success of the original valvetronix digital amplifier. A range of tube-powered modelling amplifiers, with hi-gain sounds designed to span the entire range of heavy rock music. The XL-series uses VOX's patented Valve Reactor technology, producing the sound and feel of an all-tube amp. Models: AD15VT-XL 15-watt 1×10" speaker, AD30VT-XL 30-watt 1×12" speaker, AD50VT-XL 50-watt 2×12" speakers, AD100VT-XL 100-watt 2×12" speakers.
Pedals allow instant variables, with built in effects you have to dial it in every song, I can turn on a chorus on the verse add fuzz on the hook and manage combinations in real time, much more flexible. Also boutique pedals like earthquaker devices and Devi Evers create much more complex sounds within each pedal, it really helps when u are trying to cultivate your own sound.
For those who just start to learn guitar, buying the expensive decent guitars is not a must. You can buy an affordable entry level guitar under those famous brands or buy guitars from those brands which focus on beginner guitars. So you can buy a Taylor entry level guitar or guitar from brands like Yamaha. Yamaha FG series are great for beginners because of the decent sound and affordable price.

I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.
Fender made some pretty big waves when they announced their latest line of Mustang amplifiers – primarily because of their sound-shaping abilities. You see, the brand’s modeling amp line has 17 preprogrammed amp models to choose from, as well as an auxiliary input so you can play along to your favorite tunes, and a wealth of included effects. The real highlights of this particular amp, however, can be found outside of the amp itself. You see, it includes a smartphone app that will let you shape the sound of the amp easily and remotely. Better still, the amp comes with its own recording software, so you can capture your songs at your leisure. For something so inexpensive, this amp packs a serious wallop.

Now we’ve got the basics down, let’s have a look at some simple modifiers to the circuit. This article first shows you how to add a “killswitch” to the guitar, then uses the lessons learned from that process to change that killswitch to a volume control instead. Finally, we’ll find out how capacitors are used in guitar circuits and install our first tone control.
Since Jackson is currently owned by Fender, they have the facilities, resources and more importantly, the legal right to use Strat bodies in their designs. The result are legitimate super strats from the brand that helped jumpstart the entire hot-rodded guitar market. The Adrian Smith SDX is a great example, co-designed by renowned Iron Maiden guitarist to be a road and gig-worthy metal guitar while retaining an accessible price point.
This is a fantastic tool for acoustic solos artists, worship leaders, session players or an acoustic rig that lacks a lot of control or a preamp source. Moreover, the Venue provides the additional functionality of tuning, feedback control, an effects loop and a built in DI box. Its price is usually on the higher end, though you can check used pricing which often dips significantly below retail. However, buying a preamp, tuner, noise gate and DI box separately would run you a lot more than what the Venue costs.
In many studios, the guitarist can play in the control room while the amp is mic’d up in the live room. It feels less natural at first, but this way, you can more accurately monitor how your guitar sits in the mix through the studio monitors while you track. Some players prefer to be in the same room as their amp for reasons of feel and response, but if you are using a hollowbody or pickups that are succeptible to microphony, separating the guitar and amp can help. Of course, if feedback is desirable, you are better off in the room with the amp.

“Photocell Tremolo is found in mid-1960s American amplifiers. Those classic circuits used a light-dependent resistor to attenuate the input signal, coupled with a miniature neon bulb that is connected to the LFO. As the LFO oscillates, the bulb gets brighter and dimmer which in turn varies the resistance of the LDR. The varying resistance works with other circuit impedances to change the signal level, which produces a characteristically ‘hard’ sounding tremolo that moves between two levels, reminiscent of a square wave.” Got that? Well it is tricky and they do sound somewhat different but essentially they produce the same effect. The pedal I am using here, the Fulltone Supa-Trem uses a photocell to produce the sounds found in the classic Fender amps and most common tremolo circuit.
Most reverb pedals fall into the ambient effect category, similar to delay and echo in the way it manipulates your signal. It's likened to the delay effect because it's technically a timing effect which, in the world of signal processing, can be described as "sound after sound." In other words, the original sound is produced and another sound follows.
Play your guitar a while like this, and notice how much more ring, richness, and sustain you get out of it. The strings should now vibrate for close to the full potential of the instrument (which, of course, also depends upon factors such as nut and bridge type and condition, body style, neck and body woods, and so forth). Put simply, your tone is likely to sound bigger and fuller, and to bloom with a broader voice and a longer note decay than previously. If this as-high-as-you-can-hack-it setting is a little too much for every-day playing, try backing the strings down a hair at a time, and hopefully you can find a height that offers a healthy compromise. Sure, it’s also possible you preferred it the way it was before you adjusted it at all, and if your playing style involves a lot of speed riffing, hammer-ons and pull-offs, or extreme bending, you might simply require that as-low-as-it-goes actions (and will very likely mask its drawbacks with some judicious high-gain tone). With any luck, though, you’ll have discovered an easy means of achieving a fatter tone, without purchasing or modifying a single thing.
For subtle modulation just set every knob at about 11 o'clock. You'll get a thin, shimmering layer over your acoustic guitar's tone that doesn't drown out the natural resonance of the instrument. The pedal doesn't boost your signal or add any kind of volume. All you'll hear is a clear, simple effect. Additionally, the CH-1's two stereo outputs allow you to easily split your signal between two amplification sources. Simply plug your primary source into output A (mono) and the secondary source into output B.
I am a learning myself Shreya.I purchased a Fender Model CF60 (£100) .This is a high quality "Folk guitar" from a reputable long standing company.It's got a lovely mellow tone and the size is not to big.Buld quality is excellent.At the end of the day it's all subjective.I recommend you go to your local musical instrument shop and try a few.All the Best Dean

While electric guitar manufacturers like this are often more expensive, they do provide a level of customization that isn’t available with several mainline models. Most companies of this size can have a casual email or phone conversation with you, take a few notes about how you want your guitar setup (probably jotting it all down with pen and paper) and then making a guitar to your exact specifications.
DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.
{ "thumbImageID": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black/J40048000002000", "defaultDisplayName": "Ernie Ball Music Man Cutlass Rosewood Fretboard Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Heritage Tobacco Burst", "sku": "sku:site51500000015290", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Heritage-Tobacco-Burst-1500000015290.gc", "skuImageId": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Heritage-Tobacco-Burst/J40048000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Heritage-Tobacco-Burst/J40048000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000015289", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,199.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black-1500000015289.gc", "skuImageId": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black/J40048000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black/J40048000002000-00-60x60.jpg", "imgAlt": "" } ] }

There is also a niche market for modifying or "modding" effects.[citation needed] Typically,[according to whom?] vendors provide either custom modification services or sell new effects pedals they have already modified.[citation needed] The Ibanez Tube Screamer, Boss DS-1, Pro Co RAT and DigiTech Whammy are some of the most often-modified effects.[101][102] Common modifications include value changes in capacitors or resistors, adding true-bypass so that the effect's circuitry is no longer in the signal path, substituting higher-quality components, replacing the unit's original operational amplifiers (op-amps), or adding functions to the device, such as allowing additional control of some factor or adding another output jack.[101][103][104]
Other unique features of this wonderful guitar are the 70’s styled headstock logo which effectively rounds out the look of this American instrument very nicely. Weighing just 7.2 pounds, the guitar is of pure single coil bliss! It sounds great as all Teles do and it plays like a dream. For every guitar lover, this is a true workhorse instrument to get.
While I have been able to find ways to get it to work for me most of the time, I have found that the controls for the video looping feature are not as precise as I would like them to be. There is definitely room for improvement. Another thing that I am missing is the option to control the speed of the video playback. Some competitors allow for the video playback to be slowed down or sped up while retaining the correct pitch. Guitar Tricks have been listening – Improvement have been made!This is a great help if you want to practice to play along at a slightly slower speed or if you want to review something in more detail. Luckily I have found a little helper too that allows me to control the speed of the video until Guitar Tricks are including this feature into their video player. I am using the MySpeed tool from Enounce. They advertise it to speed up videos to save time watching them. It also works a treat slowing videos down.
Slash is a longtime fan of legend Seymour Duncan’s hand-wound pickups, and for his new Epiphone Firebird, Slash choose custom Seymour Duncan "Slash" open coil-humbuckers for the rhythm (APH-1) and the lead positions (APH-2). These were Slash’s first custom pickups made with Seymour Duncan and feature Alnico II magnets and are slightly overwound for a boosted output. Each pickup has a single conductor cable, a long-legged bottom plate, and a wooden spacer. Controls include individual Volume and Tone pots with traditional Black Top Hat knobs with metal inserts and pointers along with a Switchcraft 3-way Toggle switch. Tone controls for both pickups also feature Sprague "Orange Drop" capacitors (0.022uF, 600V, 5%), the same capacitors Slash uses on his custom designed Les Pauls.
One of the quirkier instruments to emerge from the JMI/Vox operation in the 1960's (And that's saying something!) The Mando-Guitar never really caught on in a big way but remains a very cool and actually quite functional oddity. This is essentially an double-strung octave guitar; some describe it as an "octave 12 string guitar" but the strings are actually tuned in unison, not the octave arrangement of a conventional 12-string. The idea was to make an instrument that played in the mandolin range but was tuned as a guitar, as few of the Beat-era guitarists who were JMI's customers had a clue how to play mandolin! A few of the first Mand-Guitars were produced at Jennings' Dartford, Kent factory but the great bulk of extant examples were built by Eko in Recanati, Italy. With its small artist-palette shaped solid body and short 15" scale neck this is a very handy instrument, and with two Vox pickups has a fairly wide range of tones. There have been a number of similar instruments inspired by this design created in more recent decades, but the Vox Mando-guitar remains the original and coolest of all mini-guitar efforts.
"Mangoré, por Amor al Arte" is the title of the 2015 movie, the real life story of Agustín Barrios, an influential and important composer and classical guitarist from Paraguay. Born in Paraguay in 1885 talented Agustín was persuaded in his young adult age to move to Buenos Aires, the cultural hub of South America. In Argentina he began an affair with the beautiful Isabel but,...
What’s the point in having these lists anyway? There’s always going to be anger over people who were left out/included on the list when they didn’t deserve to be… And to say that any of the musicians mentioned so far aren’t talented is ridiculous, there’s no limit in the world on how much talent there is, so why does this list have to be limited to 10? Just saying…
Best Songs of 2018Best Songs of All TimeBest Singers of All TimeBest Guitarists EverBest Eminem SongsBest Metallica SongsTop 10 Linkin Park SongsBest Green Day SongsRockerboyBest Albums of All TimeBest Female Singers of All TimehayreanmarjonBest Avenged Sevenfold SongsBest Beatles SongsGreatest Music Artists of All Timecamp0112Top Ten Best Music GenresRHCPfan
I have a Les Paul Gold Top copy I bought new in the mid 70's. It has no brand name anywhere on it. I have done all the research I can and have found no conclusive results.I'm at a loss. It plays great! I do have pics. if that will help. Thanks for any help' It was bought in Montgomery Al. Clarence Carter's guitar player bought one while I was in the store so I figured ...must be a okay guitar. So I bought it. On the little square plate on the back it is hand engraved #0059. Thanks
JSL, I agree with you on the Mayer comment. Any one who is bashing him needs to listen to his latest live album. kid rips plain and simple. I have to disagree with you on the Van Halen comment, not that he isn't a great player, but to me his playing always lacked substance, no soul to it. Now, I can't stand Clapton, (I won't get into why), but he should definitely be on the list.
Chorus is a great way to thicken up the sound of a bass (especially in a 3-piece band), rhythm guitar, or solo guitar. It is often used with distorted sounds but is a fantastic way to create full-sounding clean sounds as well. Stereo output (from two separate speakers) enhances chorus a great deal. Many acoustic guitar amps include a clean-sounding chorus effect adding depth and character to the amplified signal. Chorus pedals can be very helpful in fattening up the tone of acoustic-electric guitars whose piezo pickups tend to sound a little thin.
I got this lyle acoustic (w-400) for $40 at a yard sale - it is THE MOST INCREDIBLE GUITAR you could ever ask for - looks just like a martin d-18 - solid spruce top - sweet figured mahog b&s's - back of headstock even has the valute like a martin - just kicks my buddies real d-18 to pieces - he's so jealous - if you get the chance to own one don't pass it up - it will probably be too cheap to pass up and you WILL regret it later (like I have been kicking my own ass for decades for passing up a 60's Gibson byrdland for $400)

The ‘HSS’ refers to the pickup combination, with a humbucker and two single-coils, which is a versatile arrangement for both clean and distorted playing, especially when coupled with two tone controls and a five-way pickup selector switch. An excellent price for a good brand, and perfect for newbies. Make sure to check out the full review of this guitar.

Dean Guitars is an American manufacturer, founded in Chicago in 1977. They build their guitars for speed players, and are famed for their eye-catching models, including the iconic Razorback. Signature models are also a specialty and they produce guitars for the likes of Dave Mustaine and Michael Angelo Batio, as well as huge line of Dimebag Darrell signature models.
There is some debate about who actually designed the solid-body, arch-topped Gibson Les Paul, which was introduced with a trapeze tailpiece as a Goldtop in 1952. To hear the guitarist Les Paul tell it, he was the man responsible for his namesake, pushing his prototype on Gibson executives as early as 1940. But guitar author and collector George Gruhn believes the great musician may have had little do to with the electric guitar's final...Continue Reading
There are of course, other buttons and positions featured on guitars. BB king’s Lucille had a switch to toggle different values for R11 (thus going from moody chords to punchy ‘Lead’ with a finger and no need for extra gear). Advanced guitars may have phase and antiphase switches for humbuckers or dual pickups. The jackson 5 Telecaster I think is an example as it has both a phase and anti-phase wiring on their pickup selector.

Taylor Guitars is an American guitar brand based in California. The company was founded in the mid 1970’s, and it has since grown into one of the largest and most respected acoustic guitar companies. Taylor guitars are recognized for their incredible quality, craftsmanship, and innovation, while still being an accessible guitar at a reasonable price.


Electric guitars are solid-bodied guitars that are designed to be plugged into an amplifier. The electric guitar when amplified produces a sound that is metallic with a lengthy decay. The shape of an electric guitar is not determined by the need for a deep resonating body and this had led to the development of contoured and thin bodied electric guitars. The two most popular designs are the Fender Stratocaster and the Gibson Les Paul.

Eric Clapton: select alder body with a special soft V-shaped maple neck/fretboard, 22 vintage-style frets, three Vintage Noiseless pickups, 25dB active mid-boost circuit and a “blocked” original vintage synchronized tremolo. Available in olympic white, pewter, candy green, torino red (Artist Series), Antigua burst, gold leaf, EC grey, daphne blue, graffiti canvas, mercedes blue, black and midnight blue (Custom Artist), as well in olympic white, torino red and pewter with a “Thinskin” nitrocellulose lacquer finish (Custom Thinskin Nitro).

With the development of rock, the Tele inspired and sustained yet another genre. Keith Richards of the Rolling Stones has composed many classic riffs on his battered “Micawber” Tele. Iconic are also worn-off green and respectively white Telecasters of the two frontmen of Status Quo, Francis Rossi and Rick Parfitt. Another signature Telecaster player is Andy Summersof The Police. Jimmy Page used a psychedelic-colored 1958 Telecaster, (painted by Page himself, and also known as the “Dragon Telecaster”) on the first Led Zeppelin albums, and also for the lead solo in the 1971 song “Stairway to Heaven“. The guitar had been given to Page by his friend Jeff Beck,[7] who had also been using the Telecaster with The Yardbirds. Bruce Springsteen used a custom Telecaster (with an Esquire neck) off and on throughout his career, both solo and with the E Street Band. David Knopfler, rhythm guitarist from Dire Straitsplayed a sunburst custom Fender Telecaster with white ribboning when with the band.


Before it gets shipped to you, each Monoprice guitar undergoes a setup, tuning, and inspection process by Master Luthier Roger Gresco here in Southern California. The setup ensures that the neck is straight, the action is right, and that it will stay in tune. Additionally, it comes with everything you need to get started, including strings (installed), a heavy-duty zippered black gig bag with shoulder strap, and a truss-rod wrench.

You know you’re getting great guitar from the outset, because it’s based on Gibson’s legendary Dove model, which has been sued for decades now by distinguished guitarists in numerous genres, including the likes of Elvis himself. It really does look the part, with the dove design on the fretboard and pickguard, and numerous other nice little touches.
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. However, some features are present on most guitars. The photo below shows the different parts of an electric guitar. The headstock (1) contains the metal machine heads (1.1), which use a worm gear for tuning. The nut (1.4)—a thin fret-like strip of metal, plastic, graphite or bone—supports the strings at the headstock end of the instrument. The frets (2.3) are thin metal strips that stop the string at the correct pitch when the player pushes a string against the fingerboard. The truss rod (1.2) is a metal rod (usually adjustable) that counters the tension of the strings to keep the neck straight. Position markers (2.2) provide the player with a reference to the playing position on the fingerboard.[18]
×