Speaking of overdrive and distortion, I come from the slightly less-is-more school. I recently heard Eddie Van Halen say he likes to crank things until they’re ready to explode, and then backs them down just a hair. I dig that way of thinking, and it applies whether you get your distortion from a pedal, a cranked NMV (non-master-volume) amp, or an amp with a more modern preamp-gain circuit.
{"id": "H99039", "skuOrProductId": "H99039", "categoryId":"site1AAG", "name":"DT520 Destroyer Series Electric Guitar", "pageUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "thumbnailUrl":"https://media.musiciansfriend.com/is/image/MMGS7/NonExistingImage-00-120x120.jpg", "addToCartUrl":"/guitars/ibanez-dt520-destroyer-series-electric-guitar", "hasFeatures":"0", "isAccessory":"0", "message":"Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.

Since it was originally introduced in 1975, the Destroyer has become an icon of that era's chapter in rock n' roll history. Over the years it has undergone many incarnations and the perennial classic returns once again. The body and neck of both guitars are made of a tight Mahogany for maximum resonance. The bound rosewood fingerboard is adorned with Jumbo frets. The Destroyer also features Sure Grip III control knobs for no-slip control. It's not called the Destroyer for nothing.", "value":"447.99", "priceMin":"447.99", "priceMax":"699.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"3", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site1LFMIC,site1HBA,site1LAAA", "stickerText": "", "checksum":"", "priceVisibility": "1"}

Tony Visconti is also into using ambient mics: "I'm very much a fan of the room sound, too. I always record it if it's a real heavy rock guitar with power chords and crunches and all. I'll go around the room and clap my hands and I say, 'Put the mics there, that's it.' Quite often, I'll turn the room mic towards the studio window, and you'll get a reflection of the guitar sound — not directly facing it, because you're looking for reflections." Although he states in the same interview that he'll try to use a pair of U87s for ambience if possible, he's also mentioned elsewhere using PZM mics as an alternative.
{"id": "113503875", "categoryId":"site5AAG", "name":"Vintage Palmer Electric Solid Body Electric Guitar", "pageUrl":"/Used/Palmer/Vintage-Palmer-Electric-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/NonExistingImage-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"", "priceMin":"", "priceMax":"", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Palmer", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "1", "outletonly": "", "checksum":"", "priceVisibility": "", "itemType": "Vintage"}
{"pageName":"[gc] vintage","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage","prop1":"[gc] vintage","prop17":"sort by","evar51":"default: united states","prop10":"premium gear","prop11":"vintage","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:
A batch of 20 to 30 guitars featuring Ripley’s electronics was assembled using Japanese bodies and necks. The one in our possession is a GS2-R (#28949) with a standard (no German carve) Strat-style body, bolt-on multilaminate neck made up of red-dyed 1/16″ maple strips glued end-to-end, pointy-droopy carved bi-level six-in-line headstock, Gotoh tuners, black hardware, 24-fret ebanol fingerboard, faux-pearl pennant inlays and locking Ovation Floyd-Rose-licensed vibrato system. Two plastic-covered humbucking pickups (no exposed poles) featured individual output controls for each string, with six individual three-way mini-toggles for selecting pickups combined with six fader pots directing string/pickup output to a stereo jack.
While it is fun to kick your amp and make car-crash noises with your reverb unit, a much better use is to add depth and echo to your guitar signal. The effect is similar to playing your guitar in an empty room where the sound bounces off the walls. When you move on to digital reverb pedals you have the option of some truly lush, expansive sounds ranging classic spring reverb, to studio-style plate reverb, to hall and arena-type effects.
That said, unless the beginner had a specific focus, I never have a problem recommending Line6 spider amps. Lots of options built right in (so you save a fortune on effects you may want to experiment with), and they don’t sound bad at all. I played one a few years back in a rock band and got compliments on my sound all the time, and I put nothing else in the signal path, I played straight in using one of their floor controllers at a gig. I think the whole setup (and this was the 120 watt one) cost me something like $350 bucks.
Wildwood Guitars is proud to be recognized as one of nine authorized online Gibson dealers. We invite you to browse our extensive inventory and discover the magic of one of the greatest American brands of all time. Located in the heart of Tennessee, the Gibson Memphis factory is known for crafting the majority of Gibson’s incredible semi-hollow and hollowbody instruments. These guitars are overflowing with the soul of the city they’re born in, and they represent the ultimate in both vibe and versatility.
I think I understand the value of not being tied to those things so your own technique can flourish -- not relying on anything, really. I think that it's cool to keep an eye on your purism sometimes. I'm glad I can pick up an acoustic guitar, and if it's not sounding too good, I just put it into a tuning until it does. I also have an appreciation for the almost novelty factor of being able to hit a couple of switches and go from one amp sound to another.
This is one of the coolest guitars to come out of the Gibson Custom Shop: 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Faded Cherry Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Faded Cherry.

Six slot-headed Classics were offered. The 133/8″-wide GN50 Standard ($65) had a yellow spruce top and mahogany neck and body. The 141/4″ GN60 Concert ($79.50) featured yellow spruce top and Brazilian Imulawood body. The 143/4″ GN70 Grand Concert ($99.50) sported yellow spruce and figured Brazilian fruitwood. The 15″ GN80 Auditorium (4109.50) was the same as the GN70 but with 4″ X 403/8″ dimensions. The 141/4″ GN90 Concert featured yellow spruce top and Brazilian rosewood body, with extra binding. The 14 1/2″ GN100 Grand Concert ($169.50) came in yellow spruce, Brazilian rosewood and ornate inlays. Cases were extra.

Modulation, in general electronics, means the altering of signal strength. In audio devices, modulation is a control feature that varies the strength of some effect over time to alter tonal properties. Some modulation effects mix ("modulate") an instrument's audio signal with a signal generated by the effect called a carrier wave.[70] Other modulation effects split an instrument's audio signal in two, altering one portion of the signal and mixing it with the unaltered portion.[71]
Welcome to the gallery of Silvertone guitars from the VintageSilvertones.com collection! The instruments are listed in chronological order from left (oldest) to right (more recent). The gallery will continue to grow as we get more Silvertones. The purpose of this gallery is to help identify all the Vintage Silvertone guitars from the 1950's through the early 1970's. We're major fan of Silvertones and have discovered that there's a lot of misinformation out there.
To preserve the clarity of the tone, it is most common to put compression, wah and overdrive pedals at the start of the chain, modulation (chorus, flanger, phase shifter) in the middle, and time-based units (delay, echo, reverb) at the end. When using many effects, unwanted noise and hum can be introduced into the guitar’s sound. Some performers use a noise gate or noise suppression pedal at the beginning or end of a chain to reduce unwanted noise and hum.

The electric guitar was essentially born in 1929—long before the advent of rock and roll music. The first commercially advertised electric guitar was offered that year by the Stromberg-Voisinet company of Chicago, though it was not a smash hit. The first commercially successful electric, Rickenbacker’s “Frying Pan” guitar, didn’t kick off rock ’n’ roll yet either, but it did inspire competitors to jump into the electric guitar market. Invented in 1931, the Frying Pan had an electromagnetic pickup made out of a pair of horseshoe magnets placed end-to-end to create an oval around the guitar’s strings, with a coil placed underneath the strings. The pickup, a device that converts the strings’ vibrations into electrical signals that can be amplified, was bulky and unattractive, but it worked. The commercial version of the Frying Pan was a hollow cast-aluminum lap-steel guitar, and wasn’t an immediate hit beyond some Hawaiian, country, and blues musicians. It differs from the traditional Spanish-style guitar in that it is played horizontally, on a stand or in the player’s lap, and has a sliding steel bar that can be moved along the frets for a gliding effect.
Except if, like George Gruhn, you know better. The 71-year-old Nashville dealer has sold guitars to Eric Clapton, Neil Young, Paul McCartney and Taylor Swift. Walking through NAMM with Gruhn is like shadowing Bill Belichick at the NFL Scouting Combine. There is great love for the product and great skepticism. What others might see as a boom — the seemingly endless line of manufacturers showcasing instruments — Gruhn sees as two trains on a collision course.
If you plan to be the more lead-orientated guitarist, good for you. You’ll get more chicks and a higher place in the band pecking order. You shouldn’t however, neglect your chordal playing. A song can exist without lead lines, but not without rhythm. Don’t be fooled, every one of your guitar heroes is invariably a demon on rhythm guitar too. It’s a prerequisite: you have to understand the chords, rhythm, and harmony of a song before you can play any meaningful melody on top of it.
Semi-hollow guitars are guitars which have an exposed opening, generally in the form of two f-holes on the top of the guitar’s body. The inner chamber of the guitar is then divided into two by a block of wood which runs through the body. A perfect representation of this type of guitar is the Gibson ES-335, which has been used at some point or another by musicians such as: Eric Clapton, Otis Rush, Warren Haynes, Dave Grohl, and B.B. King.
Reamping was originally invented as a creative tool. Instead of spending hours crafting the perfect guitar tone before hitting record, the dry signal from a DI is recorded and later “reamped”, saving time and letting the guitarist focus on nailing the performance. This allows the engineer to send the recorded dry signal through guitar amps or tone shaping devices during post production, eliminating the need for the guitarist to be present.
For electric guitar amplifiers, there is often[vague] a distinction between "practice" or "recording studio" guitar amps, with output power ratings of less than one watt to 20 watts, and "performance" or "stage" amps of 30 watts or higher.[citation needed] Traditionally,[according to whom?] these have been fixed-power amplifiers,[jargon] with some models having a half-power switch to slightly reduce the listening volume while preserving power-tube distortion.
One oil finish that many luthiers use and recommend is Tru-Oil, which was originally formulated for finishing gun stocks. It is the oil finish that Luthier's Mercantile carries, and if you Google for Tru-Oil you will find plentry of information about using it on guitars including some very good instructions. And those instructions will help you with Danish Oil as well.
I had a 1984 Jackson Randy Rhoads Custom with a serial # in the low 400′s…that thing would sing on a note with high gain and boost with a TS-808 Tube screamer like a Sustainiac guitar…problem was the bridge was mislocated and it wouldn’t intonate correctly…sent it back…made them replace it with a new guitar (didn’t want plugs in it)…the new one had (ermmm…still has as I still own it) the EXACT same pickups, hardware down to the tuning machines, etc…EVERY single piece of hardware was moved over to the replacement (and in the case of the bridge pickup it is a proven fact as that was/is a retail version of an SH-6 wired for series/single coil/parallel…along with the pickguard with the additional hole for switch)…same types of wood used (3 piece maple neck through construction with poplar wings) yet the replacement has NEVER sung on a note. So what does that say? I have to say that the replacement does sound “better” overall in some intangible way…glassier I guess…longer sustain…yet it REFUSES to go into a sustained feedback loop.
Since 1994 The Music Zoo has been a trusted source for musicians around the world. We've located guitars for Slash, sold guitars for Steve Miller, held performances by major artists like Steve Vai, built thousands of customer relationships, and helped countless enthusiasts find just the right instrument. Today we look forward to finding your next guitar!
A Chorus effect can help you achieve lush, warm, and rich tones that work well during busier parts of a song. The effect attempts to simulate the sound of multiple performers playing the same part of a song at once. It works similarly to a flanger effect, where a sound is duplicated and slightly delayed. Choruses often use a longer delay than a flanger, and the delay time is also modulated with an oscillator to simulate the natural variations in time and pitch that will occur between several different performers.
There are two main types of controls on bass amps: switches and rotary knobs. The simplest, least expensive practice amps and combo amps may only have a few switches and knobs, such as an "on/off" switch, a volume knob, and a bass and treble control knob. Mid-priced models may add additional tone controls (e.g., one, two or three "midrange" controls and a "presence" knob for very high frequencies) and/or add a second type of volume knob called a "gain", "preamplifier" (or "preamp"/"pre"), or "drive" (short for "overdrive") control. A good selection of equalizer knobs and gain stages is standard on expensive amplifiers. If an amp has one or more preamp or gain knobs, the second volume knob may be called "master", "volume" or "post".
Many pedal builders will order their resistors, capacitors, IC, and other components in bulk online. Most of the time, this is a much cheaper method than buying single components – plus it gives you an enormous variety of components to use. It may also be wise to check out the circuit boards inside of any old electronics, or broken guitar pedals you no longer use. You’d be surprised what you may find.
• Fast Fingers: If speed’s the goal, most shred-heads prefer light gauge strings. They’re easy to bend and promote fast playing by offering less resistance to the fretting and picking hands. Since guitar strings are measured in thousandths of an inch, the typical recommended gauge for players planning to burn in standard tuning are .009s, available in every guitar shop.
This is basically the same as having an entire studio’s worth of gear under your feet. You have 72 amp models to play with, painstakingly recreated from reference amps such as Vox Ac30 amps, Hiwatt Custom 100, Fender amps and more. There’s 194 effects to choose from ranging from distortion to modulation to delay, compression, wah – basically any effect you can think of! There’s also 37 cabinets that you can choose from which gives each amp model and effect a unique sound as well as 16 microphones which provide unique tonal qualities to your overall sound– we challenge you to get bored of this!

The reason: The dynamic range of music can exceed 60db (power ratio 1:1,000,000). Transients within the music can exceed 20db (power ratio 1:100). Therefore amps under 60Watts and ‘Single Ended Class A’ will not be discussed in this text. Valve amplifiers are used for applications such as guitar amplifiers, satellite transponders such as DirecTV and GPS systems, audiophile stereo amplifiers, military applications (such as target acquisition and radar) and very high power radio and UHF television transmitters

8dio sampled a 200-year-old Italian made mandolin to create a gorgeous sounding VST that simply rules, and will fool even the most well-trained ears into thinking it’s the real deal.  Like with the others in the series, we have our usual clean legato, artifacts, effects, tremolos, mutes — basically, you have everything you need to get the job done 99% of the time.

A lot of people will tell you that Jackson is not what they used to be. I’m not really going to try to refute or prove this claim, but their guitars are holding up pretty well at this moment. It’s still a brand you can trust to build you a solid guitar. Case in point that JS32 Dinky. It’s my favorite Jackson even though there are much better models in their current lineup.
The first step is to remove all the electronics from your guitar. This includes the potentiometers (volume and tone knobs), the switch, the pickups, and the jack. For most Fender style guitars, most of the electronics listed are mounted on the pick guard with the exception of the jack which usually has its own plate it resides on. For Gibson style guitars, the pickups are removed from the front and the rest of the electronics through the back. 
Most new electric guitars tend to ship pre-strung with "super light" guitar strings. Depending on your technique, and the style of music you play, that string gauge may or may not be too light for you. The following is a list of the standard string gauges included with each set of electric guitar strings. Note though that different manufacturers include slightly different string gauges in their sets of strings.
16-Series: Style 16 guitars were first introduced in 1961. Later, they were the first production Martins to utilize sustainable, native woods such as ash and walnut, as well as the first to implement hybrid A-frame “X” bracing. Today, these models use solid woods such as mahogany, East Indian rosewood, koa, sapele and maple. Models include DC-16RE Aura, OMC-16E Koa, D-16 GT, 000C-16RGTE Aura and the J12-16GT, a 12-string jumbo-size guitar with the series 16 appointments. Most -16 series instruments use the Martin long scale, 25.4″.
An instant classic, and an easy guitar song that offers a simple, repeated section of just a handful of dyads, or two-note chords. It is one of the most recognizable guitar riffs of all time and it’s great for beginners to learn. The entire section is played with just two notes per chord, and it’s a progression that keeps your fretting hand in just a single section of the neck. Once you learn this riff, it’ll be tough to stop, since it sounds so good, and it’s easy to play. 

The first rule of making repairs to any instrument is to decide if the value of the instrument, financial and otherwise, is worth the price of the desired repairs. If the repair is small enough to be comparable to guitar setup cost (about $50) then it is almost always worth having done. However, for large and expensive jobs like painting and neck replacement, the cost can easily outweigh the need of repair.
While Paul's Rick bass surged like an undertow, George Harrison's double-bound 360/12 (the second one made by the company) defined a new tone at the other end of the audio spectrum. Its ringing sound embellished "You Can't Do That," "Eight Days a Week," and "A Hard Day's Night," to name just three 12-string cuts from the 1964-65 period. Thus the Beatles created unprecedented, international interest in Rickenbackers, which many fans actually believed came from Britain...  (Before 1964 all Rickenbacker guitars had been made at the original Electro String factory in Los Angeles. That year Hall moved it over a six month period to Santa Ana, in nearby Orange County. )
Kay was best known for its mid-priced guitars, (i.e., quality guitars priced below top-of-the-line instruments like Gibson and Gretsch models) as well as its budget instruments. Kay made guitar models for its own brand name and guitars branded as Silvertone for Sears, Sherwood and Airline for Montgomery Wards, Old Kraftsman for Spiegel, Custom Kraft for St. Louis Music,[2] Truetone for Western Auto,[3] 'Penncrest' for JC Penney, etc.[16] Also, Kay produced a line of archtop acoustics called Kamico.

Samick is a Korean guitar manufacturing company, that is known first for constructing their pianos using imported pieces. The corporation is capable of manufacturing more than one million guitars each year. They have an acoustic guitar with good quality which makes an exceptional sound. The company sell its guitars under its own brands such as Abilene, Silvertone, Greg Bennett, and Samick.
WIRING Lay your beautifully finished guitar on a soft towel so you don't scratch it and cover the back with a cloth as wel so you don't splatter solder on it. How you wire you guitar up depends on the layout you have chosen. Mine was a simple one tone, one volume and three way switch set up. I have gone with the Les Paul set up on other guitars which is a two tone and two volume before as well. What ever set up you go with just follow the schematic that either came with you pickups or get one from Seymour Duncan. They also have instructional videos that are done by Seymore Duncan himself on Strats and Les Pauls. I recomend watching these if its your first time wiring a guitar.

Although there’s no clear delineation for when Phase Two officially began, the Hi-Flier began to develop new features. While it maintained the P90-style pickups, other aspects of the guitar were changed. The fret markers shrunk and were made uniform in size, the rocker switches were replaced by three-way toggles and a plain white pickguard was made standard.
There are a couple of tips that can help you out, however. First – as a new learner – you don’t need a stage-ready amplifier or even a high-end boutique amp, as they are both far too powerful and pricey for someone just picking up the hobby. Second, you should look into amplifier versatility. As a new player, it’s likely that you’re still figuring out your own style – and being able to change up your sound without the need for a bunch of extra peripherals is incredibly valuable in figuring that out.
Here we have something quite beautiful and very sweet sounding that I picked up directly from the very talented luthier himself while in Hawaii ...I liked this one because it has some very beautiful intricate inlay hand work see the gorgeous inlaied rosette and fingerboard not overstated just classicly tasteful WoW.. this is a Gorgeous all SOLID WOOD Hawaiian figured Koa Tenor Ukelele. I love the tone of this beauty and so will you its classic Uke tone is rich and full and plays like butta... Top wood : Solid Koa Back & Sides Material Solid Koa Neck Material : Solid AAA flamed grade Mahogany, Headplate wood: Solid Koa Strings : Italian Aquila Strings Fingerboard wood : Solid Rosewood Bridge wood : Solid Rosewood Nut Material : Real Buffalo Bone Finish : Polished Satin nitrocellulose instrument lacquer Scale Length : 17" Overall Length : 26 1/2 "( 673 mm ) Fingerboard Width At Nut : 35 mm Fingerboard Width At 12th Fret: 43.8 mm # Of Frets Total : 20 Hand picked for its great solid construction and impecable workmanship fit & finish are top notch, excellent volume & tone -playability and beauty. You will be hard pressed for find one this sweet for twice the price... Just $329. Direct comes with a top shelf hard shell case / included .
The Telecaster was important in the evolution of country, electric blues, funk, rock and roll, and other forms of popular music. Its solid construction let guitarists play loudly as a lead instrument, with long sustain if desired. It produced less of the uncontrolled, whistling, ‘hard’ feedback (‘microphonic feedback’) that hollowbodied instruments tend to produce at volume (different from the controllable feedback later explored by Pete Townshend and countless other players). Even though the Telecaster is more than half a century old, and more sophisticated designs have appeared since the early 1950s (including Fender’s own Stratocaster), the Telecaster remains in production. There have been numerous variations and modifications, but a model with something close to the original features has always been available.
After Fender’s decision in 1982 to switch Squier’s production from strings to guitars, the Stratocaster was one of the first models put under the Squier production line in Japan. It was the most commercially successful guitar Fender had produced. Originally in 1982, the headstock had a “Fender” name written in large script, followed by “Squier series” in smaller script. In 1983, this was later changed to the current 1970s large headstock featuring “Squier” in larger script, followed by “by Fender” in smaller script. Since then, there have been several variations of headstock size and Squier logos, typically based on what series the guitar is.

These are great choices, but if you want a great guitar for the price go used and get either esp ltd ec400vf or the ec401vf. They come w seymour duncan 59 neck and jb bridge or dimarzio pickups. Grover tuners jumbo frets set neck mahogany neck and body. You can find em used for $300-400 and need absolutely nothing but to be plugged in. The ec256 is a great option but for the same price get the 401 used. I have a 65 jaguar a newer mustang 2 epi's 1 paul 1 SG and when I picked up the ec401vf for $300 it was the best value to quality ratio I have ever had in a guitar. You won't be disappointed. The ec400 series were also made in s korea and the earlier 401s were made there also. The newer ones are made in China and Indonesia but the quality is still incredible. I got a s korea model ec401vf w seymour setup. It smokes my epi l.p. tradional pro and was $250 cheaper. By far best deal it there.
{"pageName":"[gc] pdp: samick artist series electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","products":";114368474;;;;evar65=Used-Guitars-Samick","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
Have a Columbus series 3 superstrat. Jackson/charvel knockoff. It plays ok with a dimarrzio bucker and 2 single coils od unknown origin. It original had a locking trem which could only dive and I replaced with a FR that can only do same because I wouldn't risk routing the ply body. Anyway the interesting point (and I'd love to find out) is that under the "Columbus series 3" badge can clearly be see the faint etching of another badge in gothic script "Winchester". Any thoughts?
We're proud to say that our best assets at Guitar Center Forth Worth are our people. When you come in for a visit, you'll find that our staff aren't just friendly folk - they're also experienced musicians. We know our way around all our new and used instruments and accessories, which is why we've earned the trust of Texan guitar slingers from the famous to the casual. If you're into percussion, you'll also love our impressive vintage drum collection here at Cowtown. Drop by for a face-to-face chat about all we can do for you, or feel free to give us a call at 817-423-3800.
As for Acoustic guitars go, you are somewhat limited by the make and model of the guitar. You can make differences in tone by the type of picks you use and also the thickness of your strings. Actually the string factor goes for both electric and acoustic. The thicker the strings the fuller the tone. Its kinda whatever you can stand on your fingers. I like to use 11’s. Stevie Ray Vaughan used crazy thick gauges of strings and had an incredible tone. Bottom line…you have to try different things and experiment to find the right tone!
omg guitar playing isnt just about speed and technically skill. its about style and uniqueness of sound, as shown by tom morello and jack white. most of those metal guitarist, with quite a few exceptions ill admit (tony iommi, john petrucci, randy rhoads & van halen, and joe satriani & steve vai), sound EXACTLY THE SAME. i think you need to expand YOUR musical taste.
This is a solid body bass guitar that has a full deep sound. There is not much middle to it which makes it less defined than a lot of basses but it does suit some music very well. There is a choice of sample sets to choose from in this soundfont. Direct or through my j-station (which makes it sound more like its through an amp), or a mix of the two. The j-station samples are the same direct samples routed out and through the j-station and back in again, which is why it is possible to have a mix of the two. The J-Station samples make a distorted beefy bass sound which can be useful for some music i.e. 3 piece bands where tha bass fills out instead of a rhythm guitar or just for a more lo-fi bass sound. The direct samples are not so distorted and can be used in alot more styles of music. There is a preset that includes slaps and slides etc to help add some realism.
Looking for Used Gear? You may have just discovered your future. Music Go Round franchisees started out as customers of our stores. They have a love of music, they love gear and they understand the industry. Most importantly they’ve taken their passion and turned it into a business they’re proud of which is an asset to the music scene in their community. Who wouldn’t want to own a business where every day they were doing what they truly love? Sound interesting?
Nice and great are just two of the many positive adjectives that people use to describe the Ibanez AEG12II-NT. And most of these satisfied users are pleased with its playability, describing it as a truly inspiring and fun instrument. Its visual appeal and sound quality are also commended often, some even coming from experienced players who compare it to more expensive acoustic-electric guitars.
If you do want to use single pedals then BOSS compact pedals come with a buffer circuit that converts your high impedance input into a low impedance output. For a more detailed discussion on the topic of single pedal buffers check out Steve Henderson’s excellent article here: https://www.rolandcorp.com.au/blog/buffered-effects-true-bypass-and-boss-pedals-by-steve-henderson
Fender:  These guys have also been around for a long time and are just as iconic as Gibson. Especially for the creation of what could arguably be the most popular electric guitar of all time – The Fender Stratocaster. The Stratocaster may be one of the most popular guitars of all time, but it’s what led to it that really changed the guitar world forever. It’s the fact that the man responsible, Leo Fender, a visionary and dedicated workaholic, invented the first commercially successful solidbody electric guitar –an invention that has led to the incredible array of amazing electric solidbodies of today. It’s important to note that Rickenbacker had created a somewhat solid-body guitar back in 1935. However, it was small, kind of awkward and not completely solid or even actual wood. Some consider it the first solidbody, but by other standards most people still credit Fender for the design. There where still other semi-solidbody experiments at the time created by Les Paul himself as well as Paul Bigsby for Merle Travis but none of those actually caught on commercially the way the Fender (Esquire, then Broadcaster) did. Fender’s original solidbody guitar went through a number of refinements and name changes until it finally came to be known as the, Telecaster.
Microphonic Pickups: Generally this is more of a problem with covered humbuckers, and more often than not it is caused by vibration of the cover itself. The easiest way to determine if this is the cause is to remove the cover. Typically there are two solder points which need to be de-soldered. If the microphonic condition goes away, you have four options. The first is to leave the cover off. This will affect the tone if the metal cover is magnetic, otherwise it will not. However, the cover does provide protection for the pickup and I'd advise leaving it, the pickup was designed to have a cover. Second is to have the pickup wax potted, this involves setting up a wax pot, and there is risk of damage to the pickup. Third is to apply a layer of silicoln inside the cover and seat the pickup in the cover before it dries making sure not to push it all out, but getting it up around the sides of the pickup. This is safe, easy and effective, but makes a mess of the pickup for future repair. (not a big concern IMO) The fourth option is to do a partial wax potting. Get some parafin from the grocery store. Boil a small pan of water then remove it from the heat. Place a chunk of wax in the cover press the wax into the holes to prevent water getting into the cover, and hold the cover on the surface of the water with a pair of tongs.As the wax softens spread it around and up the sides with a spoon. Resoften the wax until you can easily seat the pickup in the cover. This is much safer and easier than true wax potting.
This is one of our favourite cheap electric guitars and it certainly doesn’t suck thanks to its Alder body, comfortable “C” shape neck, snappy maple fingerboard and two Vintage-Style Single-Coil Tele pickups to provide that awesome tele twang. If you’ve always wanted a Telecaster and are just starting out in the world of guitar, this is a dream beginner’s guitar that is budget friendly and still completely high quality.
All guitars need to be tuned to play properly and sound on pitch. This is done with the tuning pegs (also referred to as tuning machines) on the headstock. On the top side of of the neck is the fingerboard, also called a fretboard, over which the strings are routed. Pressed into the fingerboard are small metal ridges called frets. They help delineate individual notes along the fretboard and also make it easier play on pitch.
A basic tone control consists of a capacitor and a potentiometer (the tone control itself).  The illustration below if the basic wiring for a tone control.  The view is as you would see it from the bottom of the potentiometer, wired for a right-handed guitar.  The oval "blobs" on the potentiometer casing are solder connections.  The ground wire should be soldered to the potentiometer casing for this tone control to work - and it helps shield out unwanted noise (really noticeable if not done this way and you use metal knobs).
On stages and in recording studios all over the globe, the Epiphone name can easily be found thanks to the incredible amount of work that's put into every instrument they design. So with that in mind, which is the right guitar value package for you? You certainly have plenty of choices, but starting with the top-rated items is a great way to speed up the decision-making process. For example, check out the Les Paul electric guitar player pack. Featuring an Electar-10 amp with overdrive, gig bag, pinch-on tuner, strap cables, picks and of course the classic Les Paul Special II in ebony, this package has it all. Plus, it also includes free online eMedia guitar lessons, so you'll be impressing family and friends with face-melting riffs in no time.
This extremely limited Marshall 1936V 2x12 Silver Jubilee Guitar Speaker Cabinet has been created to get the best sound out of your Silver Jubilee heads, most notably the 2555X and 2525H Mini Silver Jubilee tube amp heads. The Silver Jubilee styling looks great on stage and the 2 x 12” Celestion G12 Vintage 30 speakers provide you with all that gorgeous amp tone – perfect for 1980s/1990s hard rock.
Then there's the obvious fact that wood has no magnetic properties, so it's simply impossible that any acoustic vibrations from the body will have any effect on the amplified sound. It's also not true that any acoustic qualities of the body wood are somehow imparted back to the vibrating string; the vibrations go out into the air and, well, that's it. They're a by-product, nothing more.
This guitar is one of the most appreciated units on the market at the current time. This unit is prized for the fact that it comes equipped with a particularly sturdy body that has been made out of solid wood. Even more so, the body of this instrument was constructed using mahogany, hence its durability, while its top part contains maple. Consequently, this unit is glossy and has an appealing clear-cut design that you are prone to enjoy.

ANYBODY, OF EVERY ABILITY, CAN PLAY – Designed for every type of learner, ChordBuddy includes modifications that allow individuals of every ability to successfully learn a new instrument. Perfect for use in the music therapy, home, or school setting, ChordBuddy can help individuals learn to play the guitar flat or with two people at a time, making for what is an all-around therapeutic experience.

Barney Kessel was known for playing his Gibson hollow body jazz guitar and used it almost exclusively on his own recordings. But when it came to rock, pop, r&b and blues recording sessions with the most popular performers of the early '60s such as Elvis Presley, Sam Cooke, Connie Francis, T-Bone Walker, Ike & Tina Turner, Phil Spector, Dinah Washington and Bobby Darin, Kessel turned to his Kay Barney Kessel Artist guitar.
The distortion effect was first created back in the 1950's by overdriving the tubes of a guitar amplifier, usually by turning an amp all the way up. This caused the guitar signal to distort or "break up." While this effect was originally considered bad by amp manufactures, early rock players found it exciting since it provided a new tone for the electric guitar's sonic palette. A tone that had an edge and power that fit perfectly with the new type of rock playing that appeared in the 1960's. As amplifier manufacturers embraced distortion, they began adding more gain to their amps, which resulted in more distortion and lead to styles such as metal and shredding. Pedals have been created to simulate all these types of distortion.
I have an old 1964 60watt Australian Goldentone which I love and will keep. Had a Marshall 800 Lead at one time (head and quad box) when I was in a band but let that go when I stopped gigging. I tried a 50W ENGL combo as I was looking for an amp that was easier to cart around than my old Goldentone and I was blown away with the sound and the build quality. The ENGL should be in the top ten.
I have owned a Mesa Boogie Dual Rectifier for 5 years now and couldn't be happier! Granted, the amp took a long time to dial in my perfect tone, but it was a good way to familiarize yourself with the amp. If you want cleans, crunch, distortion, and a wall of gain that is big enough to destory small islands than this is the perfect amp. Not to mention, the customer service is out of this world! About a month after purchasing the amp Mesa Boogie called to make sure everything was okay and I was enjoying the amp. They also ask you to take a questionnaire on how the sales person performed. Great company, Best amps.
Electric basses tend to use a medium jumbo fret as most Fenders have thru the years.  There are some folks who like the medium or even the very narrow/small mandolin fretwire for basses – this is more of a vintage feel, like the earliest Fender basses (Fender created the Precision Bass in 1951).  Since string height for bass strings is higher due to gauge and tuning, they are easy to grip and many bassists do not seem as concerned about fret height as guitarists.
This guitar comes with an undersaddle piezo pickup system and a ¼-inch output. You also get a detachable lap rest so you can comfortably play this miniature guitar. The rosewood fingerboard has 22 medium frets, while the D’Addario EJ15 steel strings ensure superior playability. This compact guitar is small enough to fit even in airline overhead compartments.
THE NECK POCKET The next step is to rout the neck pocket and body cavities. For the neck pocket I like to use a 1/4" bit and leave the scrap wood edge around the body to give the router the extra support it needs when routing the neck area. To find out how deep you will have to rout the pocket measure the total thickness of the heal of the neck. Then measure the hieght of the bridge from the bottom to the top of the groove the string will sit in on the saddle and add about 1/8" to it. That allows for the string clearence over the frets. The subtract that from the overall thickness that you came up with when you measured the heal of the neck. That will give you a pretty accurate depth that you will need to carve the pocket down to. Be very careful when you rout the neck pocket! You don't want to make it too big otherwise you end up with gaps between the neck and the body and you don't want to go too deep because it can be impossible to fix. Rout a little bit at a time, and set the neck in each time to make sure you get the proper fit. It shouldn't fit to tight and the pocket should be slightly lager than the heal of the neck because you will have paint accumulation in it which will shrink it a little.
Directional mics, such as cardioids and figure-of-eights, exhibit different frequency responses off axis — broadly speaking, off-axis sounds tend to be duller, although it's a complex effect which is different for each model. Professional producers are well aware of this, and employ the effect to refine their sounds. For instance, Chuck Ainlay comments "I'll usually start with a [Shure SM57] on the amp; but not straight on axis with the middle of the speaker; it's usually off-centre, angled towards the middle of the speaker and generally just off the grille." Jay Graydon refers to a fairly similar setup: "I position the mic about one inch left of the edge of the speaker-cone centre, using a 22-degree angle, and about one inch back from the grille cloth." Andy Johns, on the other hand, has said that "the miking technique I used on electric guitars for years was two [Shure SM57s], one straight on, and one at 45 degrees. Put 'em together, and it always works."
The aim of this paper is to analyze through the finite element method (FEM) the dynamical behaviour of the ligno-cellulose composite plates from the structure of guitar. First it had been done the geometrical modelling of the structures from the plates, as the body of the classical guitar - size 4/4. Then the different structures were analyzed with finite element. The dynamical response had... [Show full abstract]
David Gilmour: Two models of Gilmour’s famous “The Black Strat” are available from the Fender Custom Shop: One is an American ’69 Strat body with an ’83 remake C-shaped ’57 RI maple neck (labeled as New old stock) with electronic and cosmetic modifications. The other is a”relic” style guitar that replicates the “The Black Strat” down to every scratch and dent. The relic version has two completely different coats of paint, just like the original.[16]
As we’ve shown here, a lot of relatively small—and inexpensive (many are practically free)—tweaks can hot-rod your tone and maneuver it to an array of differing ports of call. In some ways, it’s like tossing a handful of dice instead of just two—because the way small tweaks interact can lead to exponential changes in sound. For that reason, my advice is to take it slow and only make a single change at a time to understand what it delivers. Besides, it’s more fun (and less stressful) that way, anyway!
When you’re starting to become serious about playing the guitar, the question of “what amp should I get” is bound to pop up. There’s quite a deal of variety out there, with many brands and models, and constant innovation adding new features to choose between with each passing year. It’s enough to baffle even an intermediate player, let alone a rookie who’s just getting started. To ensure that you get the right amplifier for your needs, you’ll first need to know a bit about how the amp’s specifications translate to real life.
One of modern metal's key figures, Dimebag Darrell founded Pantera with his brother, drummer Vinnie Paul Abbott – forging a style that combined brutally precise, punk-honed grooves with splatter-paint melodic runs. After he was tragically shot by a deranged fan during a show with his band Damageplan in 2004 – on the anniversary of John Lennon's death, freakishly enough – the tributes rolled in from fans, peers and forerunners. "One of the greatest musicians to grace our world," Black Sabbath's Geezer Butler said simply. "Rest in peace."

There’s an old proverb that goes, “If you can’t afford a Fender Strat, get a Fender Standard Strat.” We can’t agree more. This is the guitar company that changed the world of electric guitar, so you can’t go wrong with any Fender. But, if you have the money, go with the Standard over the Squire as that’s truly a beginner guitar. The Standard has features such as three single-coil pickups, synchronized tremolo with high-mass bridge block, and a ‘70s-style headstock logo. While some sites are selling this guitar close to $400, it’s more commonly found just under $500. 

Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
If you feel you’re ready for a new and better axe or are keen on starting your musical journey with an awesome electric guitar, check out the models we’ve reviewed below. All of these electric guitars have become fast favorites since they were released to the music-loving public. We’re sure you’ll find one or two that would meet all of your requirements and fit your budget.
WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!
Chabot Guitars - Paul Chabot used to offer quality hand made Classical guitars (Colorado, USA) "Paul first apprenticed und er guitar maker / repairman Robert Buchanan, where he became familiar with the aspects of guitar repair, and guitar refinishing. Furthering his ability and knowledge, Paul attended Roberto-Venn School of Luthiery where he learned the basics of wood, instrument design and guitar making. Not long after graduating from Roberto-Venn, Paul was fortunate enough to apprentice under world renowned Master guitar maker Augustino Lo Prinzi. Through Augustino Lo Prinzi, Paul was able to learn some of the most proven methods and advanced techni ques of fine guitar making."
This website is not affiliated with the Samick Musical Instrument Mfg. Company in any way. We do not deal in the buying or selling of instruments of any kind, nor do we offer evaluation services for your instruments. Most prices listed are MSRP, taken from catalogs and price lists, and have not been adjusted for inflation (unless specified) and do not reflect the actual street value a model may have sold at. More on prices here: MSRP.
An amp head is an amplifier without the speakers. This is the type of amp that is most often used on stages of all sizes, from small clubs to huge stadiums. The reason is that amp heads tend to offer more power and can be hooked up to several different speaker cabinets. This allows you unrivalled power as well as the freedom to mix and match your favorite heads and speakers. Another plus is that they are much easier to carry around to gigs, especially if the venue has its own cabinet. The disadvantages of heads are that they are generally more expensive than a combo, while you will also have to factor in the cost of a speaker when purchasing one.
Albert Lee‘s extensive use of the Telecaster earned him the nickname of “Mr. Telecaster”. His acolyte Ronnie Earl (then still Ronnie Earl Horvath) favored a Telecaster during his tenure with Roomful of Blues. Both John Tichy and Bill Kirchen of Commander Cody and his Lost Planet Airmen wielded Teles, as did Chris Hillman and Gram Parsons with the Flying Burrito Brothers. Hugh Cornwell of The Stranglers has used Telecasters throughout his career. Joe Strummer (frontman of the punk band The Clash) used his worn and battered 1966 Telecaster (originally Sunburst but spray painted black) with its distinctive “Ignore Alien Orders” sticker from the beginning of his musical career until the day he died. In January 2007, Fender issued the G. E. Smith signature Telecaster in honor of Smith’s reputation as a modern master of the Telecaster. G.E. Smith was the lead guitarist in the Hall & Oates band and the musical director of Saturday Night Live. Tom Morello of “Rage Against The Machine” plays a black American Telecaster called “Sendero Luminoso” (Shining Path) for songs in drop-D tuning. Jim Root from Slipknot had a signature Telecaster released in 2009. Prince plays a Telecaster in the opening scene of his film, Purple Rain. Singer and Songwriter Jeff Buckley (Son of musician Tim Buckley) played an American Telecaster throughout his career. Lynval Golding, one of the guitarists for 2-Tone band The Specials, used a yellow telecaster throughout his time as a Special. Jonny Greenwood, lead guitarist of Radiohead uses a Telecaster Plus model with lace sensor pickups as his main guitar. British singer and guitar player Anna Calviexclusively plays a Telecaster through a Vox AC30. Danny Jones, of McFly, uses a Telecaster Vintage ’52. Deryck Whibley (frontman and guitarist of the band Sum 41) uses his own signature Telecaster Deluxe, issued in 2005. It features one knob for volume and tone, a single humbucker pickup near the synchronized six-saddle bridge and without the traditional pickup selector switch.
The extra-versatile twin-channel layout with independent controls delivers a wide variety of tones from clean to overdrive. The Sonzera 20—which we recently reviewed—packs a hell of a punch for players who need a versatile workhorse amp that pairs well with pedals and sounds incredible on its own for any style of music. While the Sonzera 50 Combo is well suited to the stage, the 20 is easy to haul to gigs, has a lower output that’s better suited for the studio—and its “American style” voicing thanks to its 6L6 power tubes (the Sonzera 50 features EL34 tubes).
ATTACHING AND DRILLING THE NECK For this you will want to use a clamp to hold the neck firmly in place while you dril the holes. Attach the neck to the body and clamp it lightly so you can set it in the right possition before drilling. Make sure you have some protection between the clamp and the body so you don't leave any indentions in the wood. A soft piece of plastic or a soft rag will work nicely. Use a long ruler to allign the neck to the position of the bridge. Do this on both sides of the neck to see that you get it centered. Tighten down the clamp a bit more until the neck doesn't move. Drill the holes as straight as possible with a smaller bit that you used on the body. If you can't reach all of the spots that you need to drill at because the clamp is in the way, take a couple of the furreles and neck screws and screw them into the neck. Once you have done this you can finish drilling the other holes with out the clamp.
In comparison with an electric guitar equalizer, a bass equalizer usually has a lower frequency range that goes down to 40 Hz, to accommodate the electric bass' lower range. Some bass equalizers designed for use with extended range basses go even lower, to 20 Hz. Equalizers can be used to change the tone and sound of the electric bass. If the instrument sounds too "boomy", the bassist can lower the frequency which is overly resonant, or if there is too much fingernail or pick noise, the higher frequencies can be reduced.
I bought mine used in 1989 in a mom and pop music store in the North GA mountains in Cumming GA and have loved it everysence I Know very little about it except that I would not trade it for a new one. The sustain in the body of the overtone note is fantastic and rare to find.I use d'Addario phosphorus bronze strings 11 - 52 and would not change anything about this guitar,fantastic!!! Thanks Victor
Brian Moore - Known for their innovative custom electronics and distinctive designs, Brian Moore Guitars continue to produce guitars that go beyond the conventional. Aside from their custom-built instruments, they now carry a host of artist signature models. One of their more popular products is the iGuitar, which feature acoustic MIDI, piezo, 13 pin Synth and more.

Ultimately, you want to make the best purchase for the person who will be playing the guitar while staying within your budget. As we recommended in the beginning, it’s good to get an idea of what the player is looking for. Find out what styles they like, and his or her favorite music. Looks are important too! The right guitar in the right color could make all the difference.
Mark Tremonti is well-known as an avid gearhead and first impressions of the MT 15 are of a purposeful, working player’s tool with no unnecessary bells or whistles. The MT 15 has clean and lead footswitchable preamp channels, with gain and master volume on the lead channel, and volume on the clean channel. Both channels have their own bass, mid and treble controls with a master presence control and a pull boost on the clean channel to add a mild overdriven edge. Around the back things are kept simple with a series effects loop plus a half-power switch which drops the MT 15 from 15 watts RMS down to around seven watts. At first glance there’s no channel indicator, however, when powered up all the MT 15’s valves are lit by LEDs which change colour: red for lead, blue for clean – very visible and very cool. The lead channel has no less than five gain stages and the amount of gain and distortion on tap is huge. However, it’s also been carefully sculpted into a stunning barrage of harmonic filth that flatters every note and power chord. Often, very high gain can easily descend into an unpleasant mush that’s perceived more as noise than music, yet the MT 15 manages to 
avoid this and retains exceptional clarity and articulation. The clean channel offers plenty of headroom to cater for any guitar, while pulling the channel mid-boost function adds a sweet vintage Fender overdrive with a medium-fast response that’s great for country picking or blues.
On the extreme end of things, adding a lot of reverb to your tone can create large, expansive soundscapes where the notes are less distinct and everything forms one carpet of background sound. Reverb pedals often have a number of controls, from the most basic knobs controlling the volume of the effect (known as “mix”, or how much reverb is mixed into your guitar signal) and the length each note reverberates for (known as “decay”), to more versatile pedals that have controls for different kinds of reverb such as “small room”, “plate” and “arena”.
You're close, but not quite where you want to be with your tone.  You are officially a serious tone chaser; you've already swapped the stock burstbuckers in your awesome R9 Les Paul for something better ... but you are still only at 95-percent of the TONE you want, need, and hear in your head.  Keep seeking grasshopper, and you will find.  For only those who persist will drink from the holy grail.
Like a door that's repeatedly opened and closed, you'll sometimes need some basic maintenance. Ensure everything is tight, and get some electronic contact cleaner (available at any electronics store), various screwdrivers and wrenches and you can often solve your own problems. It's easier on a Gibson Les Paul (with backplate access to the controls) than on a Gibson ES-335, but it can be done.
{"pageName":"[mf] pdp: epiphone firebird studio electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";519377","linkInternalFilters":"javascript:,musiciansfriend.com","channel":"[mf] shop","prop7":"[mf] product detail page"}
My rule of thumb, whenever possible, is drive the input and route the modulation. I.E. - I put compression, over drive, distortion, fuzz, and wah/filter effect on the input; and then I route flange, phase, chorus, and delay through an effects loop. I do this for a couple of reasons - 1.) I don't have 15 effects ganged together hitting my input which can effect tone, clarity, and volume; and 2.) I can shape the tone and dynamics of my guitar going the amp's input while maintaining definition, tone, and volume to my modulated effects through the buffering provided by an effects loop.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Inlay: Custom - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black - Pickups: Ibanez - String Instrument Finish: Satin Oil, Transparent Black Sunburst
The placement of pickups on the guitar's body has a significant influence on the tone they generate. Pickups located near the bridge sample the strings where they have the least overall motion. The result is accentuated treble sounds or "bite." Pickups located nearer the center of the strings—closer to the neck of the guitar—produce a tone characterized by more midrange and bass sounds.
At 10.8 pounds and 11.4 by 12 by 6.7 inches, the Crush 12 is one of the smallest amps we tested, so it’s easily portable and stashable—although with just 12 watts and a 6-inch speaker, it’s the least powerful of our top picks. It has a ¼-inch headphone jack but no line input, so you can’t connect a smartphone for play-along sessions. While our sample came in the company’s iconic orange color, it’s also available in black—although as Wirecutter editor-at-large Geoffrey Morrison put it, “Buying an Orange amp in black is like buying a sports car with an automatic transmission.”
The late ’36 Supro Amplifier was a spiffed-up version of the amp seen in the ’36 Bronson catalog, with a leatherette-type covering, leather handle, and enclosed, removable back. It now had an 8″ speaker, which spoke through a round grill with four bolts visible from the front. It’s impossible for me to tell from the illustration available to me, but this may still have had the resonator plate grill. The amp had four tubes and a “…special high fidelity circuit” that was “…rich in tone quality, and superfluous [sic!] in power.”
Personally, I just don’t understand how you can justify calling guitars that go for 2-3x the price an “alternative”. In a list like this, you should be providing alternatives that provide superior quality, sound, and ergonomics for a SIMILAR pricetag, not a jump from $200 to $600. Also, the concept that a beginner musician will have absolutely any clue that these guitars will sound poor is almost laughable to me. A good amp will do a lot of the work, and another portion of your sound goes into technique and playing style. An actual guitar itself is less important than the amp and the player. Think of an amp as a GPU and the player as the CPU cooler: if the GPU runs fine and the CPU cooler can do its job efficiently then your CPU will manage just fine as long as it isn’t so horribly behind as to bottleneck the GPU. Also, tonewoods only affect tone in a very small way that unless you are doing a back to back comparison on a clean channel with a flat response cab is very, very difficult to notice, and once you add any crunch or dirt or even distortion it’s just out of the question altogether. If somebody has never picked up a guitar then they could hardly appreciate a Mexican Strat more than a Squire at all.
For 2017, they introduced (or re-introduced?) the Firebird Studio. The Studio has regular tuners with protruding keys, and it has regular humbuckers instead of minis. It is not a Firebird, it is a Les Paul with the body of a ‘bird. This lie of a guitar sells for a whopping $1300, and the real version of the guitar - which is identical in every last detail to the cheaper 2016 model I own - now retails for $1500!

If you’re reading this guide, you probably need help purchasing a first acoustic guitar or electric guitar for yourself, a friend or a child. We're here to help you understand the key specifications and features to look out for. We'll explain the differences between acoustic, acoustic-electric and electric guitars. We'll also recommended six of our best beginner guitars and two beginner guitar value packs. 
However, these two companies were not always in as direct competition as might be assumed; yes they both made guitars, basses and amplifiers, but both tended to play to their strengths; Gibson's expertise was it's luthierie; they stuck to high end electric-acoustics, semi-acoustics and skillfully made solid bodies, whilst Fender excelled at electronics; they made amplifiers and easily built solid body basses and guitars.
Get a Luthier (or do it yourself if you have the knowledge) to change the tuners to the ones I specified, take the sharp edges off the neck, throw some extra light strings on, and do a set up and this guitar becomes a dream guitar for kids or adults for a lifetime. So while the Yamaha APXT2 may not be the best guitar for your purpose, in this price range you WILL NOT find the perfect guitar, period. At least Yamaha gave us a foundation off which to build (which you can't say for other brands) and with a little modification here and there, you will have the perfect little guitar. I bought this for my child and I find myself picking it up and playing it more than my more expensive full size guitars. It's just a pleasure having it around the house, but not so much so before I modified it. There's nothing worse than having a guitar that's just about not a toy as compared to a professional guitar. You want to make your guitar easy to tune and enjoyable to play so spend the extra bucks to make it perfect and you will have no regrets.

Guitar straps may be small, but they play a big role in your performance and comfort level during gigs or practice sessions. A top quality strap keeps your axe securely in place while you're shredding on stage, and reduces stress on the arm and shoulder. More than simply functional, guitar straps add a decorative look to your stage presence to complement your own personal vibe. To that end, El Dorado offers a variety of stylish, durable guitar straps to add to your accessory collection, allowing you to spend less time wrangling straps and more time focusing on the more important task of making awesome music.
I have a vox valvtronics amp I bought a while ago it has a real preamp tube and loads of very accurate effects great reverb 3 kinds good modulation effects awesome distortion and tube overdrive and very important it is easy to adjust effect level and a power knob that lets you adjust output 1 to 60 watts like a pr attenuator its great so you don't loose that sound of a cranked up amp when you don't want it to loud it also has a easy to use tuner this amp is very user friendly unlike some modeling and effects carrying amps and you can easily adjust effects levels with separate knobs no confusion also a pedal to control effects is available for about 50 dollars is a great studio or small gig still amp and saves a lot because all of the effects it offers its like having a vox tone labe on top of a amp exactly you can sound like van halen led Zeppelin pink floyd lady gaga or the beatles and more and the price is very competitive to all others in its category
4. Vox VT40X 40-watt 1x10 Combo Amp ($249.99): The Vox is another modeling combo that utilizes a Valvetronix tube preamp to give you the sound qualities of a tube amp. With 13 onboard effects, you can channel quality effects without having a pedalboard at your disposal. Vox’s Virtual Elements Technology has allowed them to carefully recreate up to 20 realistic models of very sought-after amp tones, all within an attractive looking package.

• Now let's add some slap-back room delay. In the seventh insert (which, incidentally, comes post‑fader in Cubase, as does insert eight), go to Delay/StereoDelay. In the left channel, try setting Delay to 1/16T, Feedback to 6.5, Lo to 50, Hi to 15000, Pan to ‑100, and Mix to 20, and enable Sync, Lo Filter, and Hi Filter. Use the same values for the right channel, but with Delay at 1/16, Feedback at 7.3, and Pan at 100.
Slow Gear – A dynamic effect created by BOSS that swells in volume as if you were riding the volume knob on your guitar. The effect is similar to the envelope of a violin with its ability to remove the “attack” or initial transient of the signal and produce gradual volume swells. The compact pedal version of this effect is discontinued but it is found in both the ME-80 and GT-100 multi effects pedals.

I keep coming back to this point because it’s absolutely essential: learn how to solo over chords. I don’t mean simple chord arpeggiating, even though that has its place, too. If you can follow the chord changes with smooth, soulful playing, you will never be fenced in. You can drop into any style, any band, and any situation. Most of us get stuck playing a given scale pattern for years before something shakes us up. Make this the foundation of your learning with this book.

JVGuitars is very proud to present to you yet another wonderfully aged High end Law Suit guitars out of Japanese it is a hand crafted acoustic guitar built well almost 40 years ago, what many may not know is that Takamine on these high end exotic tone woods models were master built by using well aged tone woods of 25-30+ years of age at the time when built making this a true vintage guitar in its own right. This example has been very well maintained and taken care of as you will see, this is a California guitar and has not seen much of the ravages of extreme weather and other extreme changes that can damage 0 warp – dry our and Split – crack and otherwise severely damage a perfectly good instrument so this guitar shows no evidence of any of those common afflictions on the contrary this guitar is rather CLEAN over all,Its beautiful solid spruce top is pretty flat and its bridge is nice and tight as well and its bracing ( same as Martin D-28 ) is all good throughout so this guitar has good bones!, bindings too are all good, frets are good and we dressed and polished the frets and they are good for another 20+ years of play, its neck is excellent!.. Fresh install of a new Martin bone nut and compensated saddle and this guitar is set up with Martin Marquis strings and plays beautifully. The original tuning gears are in place and working excellently too. This guitar is a pleasure to play its action is very good at medium - low more on the lower side of medium and it plays with ease and sounds incredible and has even more saddle room to go lower in future if wanted . This guitar has the LOOK it just has it… its absolutely GORGEOUS with the breath taking 2-piece center seam Brazilian Rosewood back & sides - fingerboard and headstock overlay its truly stunning ,as stated it’s exotic TONE WOODS are of the Brazilian Jacaranda verity and its presence overall is stunning perhaps surpassing that of the Original Martin D-28 they copied/ I will suggest that you be the judge of that see for yourself and have a good look At some old Martins as well this guitar stands toe to toe with any of them. This example is nice and deep sounding and its volume is excellent. This guitar is JVGuitars condition rated at 9/10 vintage excellent , it is not new or mint it has a few minor dings as its over 40 years old, it has patina aging that of the color showing on the bindings have Ambered naturally with age this is what make a vintage guitar beautiful this is in the eye of the beholder. These exotic TONE WOOD series guitars in this kind of condition are hard to find these days this one is A real GEM!…… Let me know if interested Thanks for Looking Joe Email me at: JVGuitars@gmail.com excellent recording possibilities.. Pics soon to come ! any questions let me know: jvguitars@gmail.com .

Great article. Thank you!However I've had a lot of experience with Squier guitars. They often come in at $200, sometimes on sale for $129 but I live in a college town and have had many Squiers. All have very sharp fret ends which discourage beginners not knowing they must be filed. IDK about any of the others but this is my only complaint. Squier quality and playability (after fretwork) is amazing at that price point.
It's amazing how this relatively new company, which officially started in 2007, is now playing with the big boys. Blackstar has a pretty straightforward claim to fame, and that is to provide premium quality high-gain tone in the price ranges that they enter into. And judging from the very positive response of rockers and metal heads, they are doing their job really well. As usual, artist endorsements play a big role, and Blackstar has big name backers like Neal Schon from Journey, Richie Sambora, Ted Nugent and Sammy Hagar to name a few, along with a long list of up and coming guitarists from rock and metal bands. While they still excel in providing high-gain tones, Blackstar amps also offer versatile overdrive and distortion flavors, thanks to the company's innovative ISF (Infinite Shape Feature) technology, which lets you change the tone of your amp from American to UK flavors with just one knob.
Electric guitars have come a long way since then, and today you’ll see many different designs. But you can still find big hollow-body jazz boxes that hearken back to those early days in the lineups of many manufacturers. They’re best suited for jazz players looking for a warm, woody sound. Of course the technology has improved greatly in the past eighty years, but these instruments still have a nice vintage vibe. You’ll sometimes see these instruments referred to as semi-acoustic.
Reverb is one of the most popular guitar effects in use. It’s so subtle, natural and valuable that it can easily turn a mediocre track into something more profound. The pedals we have listed above are by far some of the best you can get at the moment. They are not all the same, and each offers its own take on reverb in general. However, all of them will serve you more than well in your search for that tasty reverberation. Lastly, we hope that this guide has helped to clear up some misconceptions about reverbs you might have had.
There are times when a single-coil just doesn’t have enough twang. I’ve encountered Strat neck pickups that are just too wooly to provide me with that saucy, SRV/Hendrix-style rhythm juice. Or, sometimes an anemic bridge pickup just needs an extra dose of snap to push it into Tele-like territory. If so, this simple mod could be just what you’re looking for.

That’s why it’s incredibly important that once you work through your first method book you should start seriously considering finding a teacher to further your education. A teacher can help give you the tools that you’ll need to continually advance on your instrument, which in turn will ensure that it will be a lifelong source of entertainment and enrichment.
In 2003,[73] Gibson debuted its Ethernet-based[74] audio protocol, MaGIC, which it developed in partnership with 3COM, Advanced Micro Devices, and Xilinx.[73] Replacing traditional analog hook-ups with a digital connection that would, "...satisfy the unique requirements of live audio performances," may have been the goal of this project.[74] This system may require a special pickup,[73] but cabling is provided by a standard Cat-5 ethernet cable.[73][74]
As you will see, our list embraces outsiders, trailblazers, outliers, and Eugene Chadbourne playing a rake. We don’t worship “guitar gods,” but prefer our axe-wielders to be resourceful, egalitarian, flawed, and human. We’re not drawn to Olympic feats of fleet-fingered athletics, unless they’re used for unique and exploratory ends. We see the mewling histrionics of Jeff Beck as tyranny instead of catharsis. The name Derek Trucks is practically alien to us.

Unfortunately, there is no single unified format used for Ibanez serial numbers. Ibanez guitar production is outsourced to several companies and facilities through the world and the numbering schemes are different in each region and/or factory. The information on this page is culled from several sources both on-line and off-line and represents a distillation of the available information. It applies primarily to electric guitars, but some information may also be applicable to acoustics.
Everybody doubles their rhythm parts, but I always thought, 'Why don't they double their lead solos, too?'. It's really hard to do, especially with any bends and faster sections, and it does take a very long time, but I've been doing it a different way to make things a little easier. For instance, as soon as I've just finished a song, I'll double the lead part right away, while it's still completely fresh in my mind.
This is another classic in Fender's guitar roster. The Squier by Fender, Vintage Modified '51 is another example of how phenomenal Fender is as a company. This guitar is capable of producing versatile tones because of the SH pickup configuration and rotary pickup selector. The neck of this guitar is C-shaped which makes string bending easy as you like. This guitar has a strat body shape which adds to its cool, classic look.
As previously stated, a dominant seventh is a four-note chord combining a major chord and a minor seventh. For example, the C7 dominant seventh chord adds B♭ to the C-major chord (C,E,G). The naive chord (C,E,G,B♭) spans six frets from fret 3 to fret 8;[49] such seventh chords "contain some pretty serious stretches in the left hand".[46] An illustration shows a naive C7 chord, which would be extremely difficult to play,[49] besides the open-position C7 chord that is conventional in standard tuning.[49][50] The standard-tuning implementation of a C7 chord is a second-inversion C7 drop 2 chord, in which the second-highest note in a second inversion of the C7 chord is lowered by an octave.[49][51][52] Drop-two chords are used for sevenths chords besides the major-minor seventh with dominant function,[53] which are discussed in the section on intermediate chords, below. Drop-two chords are used particularly in jazz guitar.[54] Drop-two second-inversions are examples of openly voiced chords, which are typical of standard tuning and other popular guitar-tunings.[55]
Made famous by George Harrison in the ‘60s, the jangly Rickenbacker 360/12 12-string electric guitar has become perhaps one of the most iconic 12-string electrics. With a semi-hollow body and thru-body neck, the 360/12 is able to create a unique tone that is difficult to create with other 12-string guitars. Though this model has undergone many changes and seen many iterations through the years, the newer Rick 360/12 models have a slimmer neck and are still highly-sought instruments.

A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.