The fretboard wood is used for the part where the frets are installed (front of the neck, where you press on the strings). All our fretboards are built from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
This is an echo effect – every time you play a note it is repeated quieter and quieter, just like an echo. You can get a variety of different delay effects, from old-school “tape” echoes which are said to sound more natural, to analogue delay pedals and more modern digital ones. Digital pedals tend to sound clearer and a little harsher than their analogue cousins, making them more suited to modern styles such as modern metal.
Fender’s legendary tone is enough to win just about anyone over, and they cater to a wide range of customers by offering the more cost friendly Squier series. While their classic electric guitars are favored by plenty of players, their acoustic selection and Jazzmaster offerings have their fair share of supporters as well. No matter what you’re looking for in a guitar or what price range you’re shopping in, you’re likely to find a good fit with Fender.
{"product":{"id":"113900398","stock":"instock","price":"179.99","name":"Vintage 1960s Decca DM1-204 Natural Acoustic Guitar","download":false,"sku_id":"113900398","checksum":"134135816000","rep_id":"site5113900398","displayId":"113900398","sku_display_id":"113900398","sku_rep_id":"site5113900398","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
I’ve used Eagle for a long time, but I just recently started using Circuit Maker, and I like it so far. I’ll probably end up using both since I do most of my work on a Mac, and Eagle still works fine on that. I had to set up a dedicated Windows machine for Circuit Maker. Circuit Maker has a 3D view of the finished PCB which is a very helpful tool if you are dealing with odd board sizes and very constrained layouts.
Since joining Charley's team, Russell has worked on hundreds of guitars. Music shops across Dallas and Fort Worth call him with questions. He's even corrected other guitar masters' mistakes, and he's also repaired some of the music industry's finest guitarslingers, including the guitarist from Cold Play and countless prominent local musicians. "It's part of the joy is knowing that I'm helping put players in a position where they can get on stage and feel confident knowing their guitar is working at its peak." He's also probably the only guitar master on this list asked to restore a broken guitar back to its original broken state. But it wasn't just any broken guitar. It was Elvis Presley's Martin D-28. "Elvis had broken it." This guy is truly more than a guitar master; he's a magician performing musical magic at Charley's five days a week.
So far I’ve only tried this on breadboard, though I plan to deploy it in a new “parts” guitar I’m assembling. So far it sounds … really good. A lot like a ToneStyler, actually, but with fewer parts and handpicked values. The only tricky thing was finding a good pot value where all the action wasn’t bunched up at one end of the knob’s range. A reverse-log pot worked best for me—I got nice results with both a C500K and C1M.
Alnico magnets in a humbucker pickup should make you think vintage tone, with said pickups generally lower in output in comparison to their ceramic counterparts. But having proved capable, and indeed at home with rock and metal, it's great to learn that rolling off the gain emphatically proves that the XM-DLX2 is no one-trick pony; the neck pickup easily handles fat, rounded jazz/blues tones with the bridge pickup fluent in Skynyrd-esque raunchy pickin' country.

{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: lotus","pageName":"[gc] shop by brand: lotus","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop by brand: lotus","prop1":"[gc] shop by brand: lotus","evar51":"default: united states","prop10":"brands","prop11":"lotus","prop5":"[gc] shop by brand: lotus","prop6":"[gc] shop by brand: lotus","prop3":"[gc] shop by brand: lotus","prop4":"[gc] shop by brand: lotus","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section"}
We all know the sound of this effect: It replicates varying degrees of the sound of playing your guitar in the gym showers, a cathedral, or Mammoth Cave, and it has proved itself one of the most atmospheric aural adulterations available. Since none of those locations is entirely gig friendly, however, our ever-handy techs have bottled the flavor in a reliable, portable form. This category covers both echo and reverb effects, since they are versions of the same thing. The term “echo” was used more often in the early days, and is sometimes used today to refer to the distinct and distant repeats of a signal, while “delay” refers to anything from the same, to the short repeats heard as reverb, to the complex, long, manipulated repeats of an intricate digital delay line. Either way, they are both really the same thing, just used differently.
The fretboard wood is used for the part where the frets are installed (front of the neck, where you press on the strings). All our fretboards are built from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
Think Eddie Van Halen in Eruption. Phaser effects create a swirling tone by splitting the signal and then moving each part in and out of phase with each other. Like chorus, it can sound dated, but it is great for adding a little bit of craziness to any riff or solo. Some pedals such as the famous MXR Phase 90 only have one control for the speed of the effect, while more modern designs also have controls for the depth and level of the phasing.
Your fighting skills are legendary — you have all the right moves, the sharpest strategies and the guts to battle your way to the top. But when you enter the Mortal Kombat Tournament, the competition rises to a whole new level. It will take everything you have not only to prove you're the best, but to stay alive. Hang on tight because, ready or not, you're in for the fight of your life. Mortal Kombat X delivers the fast-paced fighting action that fans of the franchise have come to know and love, fueled by brand-new technology that elevates your experience to the next level. Enter the brutal world of Mortal Kombat with cinematic presentation that offers stunning visuals. Rise to the challenge of the competition with all-new gameplay. Craft your fighting and strategic styles with the ability to choose from multiple variations of each character. Prove your dominance with fully connected online play that lets you decimate the competition and show you're the best in the world. Steel yourself for battle — the fight for global supremacy, and your life, is on.
Sometimes a guitar cab gets mic'd up differently night to night, plus every voice is unique, and every snare drum "speaks" differently (just ask a drummer). All of these minute changes and differences can and will affect the EQ decisions you'll have to make. This is why I'm such a strong believer in ear training and learning how certain parts of the frequency spectrum present themselves outside of their source-specific applications. That being said, these tips can be helpful as a place to start your search, but are not gospel by any means. So without further adieu, let's begin.

I am old enough to remember Kay guitars back in the 70's. And what I remember of playing them is they were poorly put together, poor action (like mile high action), poor sounding pickups etc...They also seemed to always be the guitars that were the cheapest in all the mom n' pop stores, and the ones that were just sold to students, if they were sold at all. In other words,
The far mic will give you a bigger, more heavy-metal type of sound with a more pronounced bottom end on it. The reason for that is low end sound waves take much more distance to fully develop than high end waves. Someone once told me that a low E note on a bass guitar takes thirty-three feet to fully develop. Whether or not that is true will only be known by people who have enough time on their hands to calculate such things. I do know that if you take a tuning fork that's vibrating with a high note and stick it in the imaginary puddle of water, it will generate waves that are small in comparison, and closer together than what a low note will make. Simple physics.
Indeed, a little bit of bow is OK. In fact that's what we're doing when we make sure there's a gap of approximately 0.012” at the 8th fret. But as mentioned in the article, this is personal choice; some people prefer a bigger gap here, some like less, but 0.012” is usually a good starting point. As for buzzing, some people are OK with a little bit. Mostly as long as it isn't heard through the amp, a little bit is acceptable. Again, it's all down to personal choice.
Multiple stages of valve gain/clipping can be "cascaded" to produce a thicker and more complex distortion sound. In layperson's terms, a musician will plug a fuzz pedal into a tube amp that is being "cranked" to a clipping "overdriven" condition; as such, she will get the distortion from the fuzz which is then distorted further by the amp. During the 1990s, some Seattle grunge guitarists chained together as many as four fuzz pedals to create a thick "wall of sound" of distortion.

Adding effects at the mixing stage gives the engineer greater creative flexibility, but if the guitarist needs to hear the effects to play, then you may get a better artistic performance by recording them with the take. All I'd say on this point is that editing is much more difficult if the sound is recorded with delay or reverb, so an alternative is not to record these effects initially, but still add them to the monitor mix for the player's benefit during performance. Effects like chorus and wah-wah can be recorded straight off, if required, as they don't affect the ease with which a part can be edited. Ultimately, the performance is what really counts, so compromise in favour of the player's artistic needs rather than your technical needs where a choice has to be made.

Now that you have made it through, if you chose to build a guitar, you are probably going to want to make more. Hopefully some of the info as well as links I have provided has helped to get you started in the right direction. Guitar building is fun and chalenging at the same time, and if your like me you will always want to improve your skills and find something else to try out on your next project. I have added some pictures of some of the guitars that I have made down at the bottom so you can see my progression. So here's to having fun and building a piece of art that you don't just have to look at. Though they do look good hung on a wall!
For more balanced tone and increased sound quality, the Agile AL-3010 comes with two tone and two volume controls, plus three-way pickup switch.The guitar comes with professionally installed strings sitting tight on an ebony fretboard with 22 jumbo frets and solid abalone trapezoid inlays. This gorgeous guitar is highly recommended for the beginner and even the professional alike.

The most musically satisfying types of distortion tend to be progressive, where the audio waveform becomes more 'squashed' as the level increases. Hard clipping, by contrast, tends to sound harsh. All these types of distortion introduce additional harmonics into the signal, but it is the level and proportion of the added harmonics that creates the character of the sound. Harmonically related distortion can be added at much higher levels than non-harmonically related distortion before the human hearing system recognises it as such, so there is no way to define a percentage of distortion below which audio is acceptable or above which it is unacceptable. The reason that digital distortion has its own character, which most people find less musically pleasant, is because it is not usually harmonically related to the input signal. For example, quantisation distortion, which results from sampling at too low a bit depth, sounds quite ugly, though many dance and industrial music producers have found a use for it, and some plug-ins deliberately introduce it.

A very, and in my opinion (from experience), the most difficult technique to learn and one of the most versatile. From simple single string transitions (a term I use to describe it I don't know the actual term) and used in jazz to quick shredding in rock. Learning this skill was not only a task, but helped me more fully understand a lot of musical theory.
do you have any iOS devices? So far Garageband and Guitarism are the most convincing guitar emulators ive heard yet. Next to that, for VST i go with RealStrat. But still, its going to track midi for notes that do not exist on a guitar. So while it wont play those incorrect notes through realstrat, it will make exporting midi to tab or sheetmusic a nightmare. Dont sleep on the iOs stuff, particularly because of the input and control methods. You have no idea the difference between a fake strum on a touchscreen versus all manner of keyboard inputs. You spend most of your time trying to emulate plucking in VST guitar apps...
The PRS McCarty 594 features a double cutaway body style. It has an African mahogany body with a figured maple 10-Top and gloss nitrocellulose finish. The neck is mahogany and is topped with a bound dark rosewood fretboard with a 10-inch radius and iconic bird inlays. The neck sports a new Pattern Vintage neck shape, which is as wide as the standard Pattern neck profile but with just a little extra thickness and a slightly asymmetric carve.

Maple is a very hard type of wood with good tonal qualities and good sustain. Guitar necks are traditionally made from maple, in part because of its strength, and in part because the material can highlight and amplify the wood in the body. Maple is also often used as a top for the guitar body, partly because it is beautiful (think flame, or quilted maple tops), and partly because it can brighten a sound that would otherwise be murky.
One cheaper ampless option mentioned in the article is the Tech 21 Fly Rig used with pedals in front of it – I actually got a $270 Tech 21 RK5 (very close to being the same thing as the Fly Rig 5 mentioned in the article, but the Richie Kotzen signature version with his signature OMG distortion replacing the “Plexi” OD which is on the Fly Rig 5). I’ve used it direct into a cheap PA at practice and it doesn’t sound good to me that way – however, it sounds really pretty good going into an amp, which is what I did for a set-up-quick-and-get-out-after-playing hour-long gig a few weeks ago, plugging into an amp provided at the place we played at. It still didn’t come close sound-wise to my relatively cheap amp setup (hybrid Marshall JMD 50 watt head into Marshall 1960A 4 x 12 cabinet, no additional effects), but a lot more portable of course. So maybe I need to experiment with adding OD pedals to the RK5 for an improvement in sound.
I have had some dog bad guitars! You and every one passes up Rickenbacker. I just dumped mine, I had two in my life they are bad out dated guitars. I saw people come in a store to buy one, they play one with a great Fender amp and walk out with some other brand. You do not see and of the greats play them. The sounds of the 60's is not a Ricky. Look for them and you will only see old photo of Lennon play one, no solos!

Compressors also have the ability to increase the sustain of notes beyond sounds that are normally usable on the instrument; yet another reason the effect is a popular tool in the soloist’s arsenal. The tiniest signal can be normalized to the same amplitude of a fierce pick attack, and a trailing note will resonate at the exact same volume until the string stops inducing a signal on the pickup.

A humbucker pickup is electrically equivalent to two single-coil pickups wired together in series. Coil splitting involves shorting one of the coils to ground, essentially turning the humbucker into a single-coil pickup (not a perfect replica, though, as the magnetic circuits of the two pickup types are different). This is usually done with a DPDT switch, but can also be done with a push-pull pot. Some manufacturers have used a pot to vary the amount of signal shorted to ground from one coil, thus producing a range of tones between a humbucker and a single-coil. Coil splitting results in a sound that's brighter and has less output than a full humbucker. It also eliminates the humbucker's noise-cancelling properties. This modification requires the start and end of both coils to be exposed, which is more commonly available on aftermarket than stock pickups.[17][18]

The OM model came about due to Perry Bechtel, who was a virtuoso plectrum banjo player. Perry came to see the Martin family in the early summer of 1929. He wanted Martin to make him a guitar which he could easily adapt his banjo style (remember by the late 1920s guitar was the hot instrument, replacing the banjo). He requested 15 frets clear of the body and a 27" scale in Martin's largest standard body size (which at that time was the 000, with 12 frets clear of the neck). The 27" scale would retain the fret spacing of the plectrum banjo, and 15 frets clear of the body would closely resemble the length of a banjo neck.
From 1986-1989, “Made in China” Squier Stratocasters carry the “Affinity” decal on the smaller ball of the headstock and have serial numbers as NCXXXX with the first number the year of manufacture, e.g. NC6XXX (Made in China 1986). NCXXXX is also used for Squier Strat Bullets of the same vintage. The Affinities are practically the same as the Japanese-made Squier Bullets of the mid-’80s; the same alder bodies, same rosewood-type fretboard and maple necks. Tuners and electronics are also very similar – not the best but distinctive in sound. Common modifications are more stable tuners, larger potentiometers, better capacitors, and pickups. They had single-ply 8-hole pick guards like the ’50s Fender Strats giving them a classic look. Colors were typically black, white and red.

ESP is another huge brand in the realm of electric guitar, with huge bands like Metallica, The Rolling Stones, Deftones, Lamb of God, and Slayer endorsements in full swing. Any fan of this kind of acts will be very interested in starting with an ESP of their own. Like Fender and Gibson, ESP has a more affordable range known as LTD. This kit includes an electric blue H-51 guitar with 24 frets and dual humbuckers, as well as a 12 pick sampler set, gig bag, guitar stand, strap, 10-foot instrument cable, and a tuner.

Another great book by Nicolas, this one shows you exactly how to create your own personal tone using amplifiers, effects and your guitar itself. Any beginner will benefit from this clearly written guide including everything from a breakdown of all the different ways to individualize your guitar playing technique, to information about virtual effects.
{ "name": "Black", "skuUrl": "/El-Dorado/Vintage-Leather-Guitar-Strap-Black-1274228084716.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "11-16-2018", "price": 85.00, "isOnSale": false, "msrp": 85.00, "salePrice": 85.00, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $4 back in rewards Valid through,85.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "85", "decimalValue": "00", "listPrice": 85.00, "isPriceDrop": false, "priceDropPrice": "", "promos":["freeShipping","international","return"], "warranty": false, "sku": "site51274228084716", "shipToStore": true, "displaySku": "361091000001000", "displayId": "1274228084716", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361091000001000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Vintage Leather Guitar Strap Black", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"41079093650", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }

Everyone from Jazz guitarists to lovers of Queens of the Stone Age style heavy rock have fallen in love with the Artcore series since it was first introduced in 2002. Fusing expert workmanship with affordability, the Ibanez 2017 Artcore AS53 Semi-Acoustic Guitar, Transparent Black Flat is one of the best cheap electric guitars you’ll find on the market today. It’s budget friendly price tag makes it a fantastic choice for beginners whilst the high-quality pickups and superb tonewoods are the reason why so many pro level players will choose it for the stage and studio.

In 1978, Michel Chavarria, guitarist, singer and songwriter for French band Madrigal, decided to create a guitar shop with his friend Daniel Delfour. The shop was on a street called "rue de Laganne," which inspired the name Lâg. Like in many other cases, the small business started as a repair, setting and customization shop before creating its own models. Due to the quality of their instruments, they sell custom-made guitars to French and international musicians like Jean-Jacques Goldman, Phil Campbell (Motörhead) and Keziah Jones. Among the best-known models we have the Arkane (a Super-Strat available with different pickup combinations) and the Roxane (with Gibson-like humbuckers).

Overdrive can be subtle and produce warm slightly overdriven tones, think SRV. Distortion is easy to see as simply more overdrive, these tones are more saturated and compressed. The spectrum of overdriven tones is huge, from BB King’s slightly overdriven tube amp tones to Eddie Van Halen’s cranked Marshall, to Metallica’s thick distortion, to Smashing Pumpkins’ fuzz tones. It is all actually the same idea is a general sense, these tones may be gotten with amps, pedals, or a combination of both but it is all the same idea, overdrive. What was considered a heavy distorted tone in the 70’s is tame to the metal sounds of today.
Epiphone Les Paul Special II Player Pack   New from$249.00In Stockor 6 payments of $41.50 Free Ground Shipping Silvertone SS10 Citation Electric Guitar Package   New from$150.95In Stockor 4 payments of $37.74 FREE 2-DAY SHIPPING Silvertone SS11 Revolver Electric Guitar Package   New from$160.95In Stockor 4 payments of $40.24 FREE 2-DAY SHIPPING Epiphone Slash Appetite for Destruction Les Paul Performance Pack   New from$349.00Coming Soonor 8 payments of $43.63 Free Ground Shipping See All Electric Guitar Packs

The body is clearly a tweaked vintage shape, meant to evoke — and depart from — a more-typical Strat-type. It’s an exceptionally comfortable guitar and the H-S-S pickup layout allows for wide-ranging tones. They’re definitely on the airy side, as can be expected at this price, but the guitar itself is good enough to withstand future upgrades, if you should desire them.
If you really like to cover all options, record using any of the above methods but also take a straight DI feed with no effects and record that onto a separate track so that you can process it later. Some engineers have been known to use a recorded DI guitar track to drive a guitar amplifier, which is then miked up and re-recorded, but you could take the easier route of using a hardware recording preamp or a guitar amp emulator plug-in to process the track.
Our guide to guitar strings, the hope and savior of beginners across the world. We're going to cover the types of guitar strings, how they're made, the best brands, the standard gauges, how to pick the right ones for your instrument and style, what to expect in terms of cost, and much more. Take a ride with me through Ledger Note's guitar string guide...
My sound is pretty clean with no overdrives or distortion. Besides a tuner and a volume pedal, I use a delay and a reverb pedal (TC Electronics) and I have a freeze pedal as well (EH Superego). I’m never sure if the freeze pedal should come before or after the delay and reverb. By trying both options I can’t really hear a difference in the overall sound which I guess is fine. Any thoughts or recommendations are welcome.
Guitar amp and FX plug-ins are very advanced nowadays to the point that you can actually record “clean” by plugging your guitar straight into a mixer or interface, and add a plugin like Guitar Rig, Amplitube or Waves GTR as an insert. You will hear this effect as you play but without any risk of feedback, since no mics are live in the room. This approach also means you can tweak and change any aspect of the sound post-recording since the raw recording is actually completely dry.
Makers of the Elk badged guitar from the early to mid 1960s to 1975, although other sources indicate that the Elk brand did not stop production until the early 1980s. Elk badged guitars came in clear acrylics in addition to colors in the early 1970s, which was an attempt to copy clear acrylics designed by the legendary Dan Armstrong in the late 1960s.
Mike Hedges also uses this idea a great deal, and explains how it really comes into its own at the mix. "You've got two or three tracks of guitar: one clean, one medium — say, half-driven — and then one really driven. As the song progresses, you might use the nice clean track during the verse, as you're coming to the bridge you fade in the heavier guitar sound, then back it off a bit, into the chorus with everything full on, then back to the next verse and drop it all out. It's all done on one guitar track, so it doesn't sound like you've done 10 guitar overdubs. It has a different quality, it sounds like a live performance, but you've got real dynamics in the sounds. It's a very effective technique."

This deal leapt out of the page at me straight away. The Fender Squier series has been around a while and even though it’s a budget guitar, you can always rely on Fender for great quality. But what I like the most about this package is that everything you need is included (apart from a guitar stand) and the Frontman 10G amplifier has some extra features that are excellent. The amp has an input for a playback device to jam along to (like your iPad or Smart phone, or even a CD player) plus a headphone output for when the neighbours get too annoyed. A Gain control and Overdrive switch let you grunge everything up, or you can dial it back to a classic, clean Fender sound.

Back in the 1930s jazz and big-band guitarists began to make the switch to electric guitars in order to compete with the volume of other instruments onstage. Early electric instruments were hollow-body guitars. They were big, and featured an arched top that helped with power and projection. They had f-holes to facilitate amplification acoustically, and the first rudimentary pickups that allowed the guitar to be plugged into an external amplification system.
At the top of the fingerboard, just below the headstock, is a slotted piece of material called the nut. The strings are routed through the slots in the nut and terminate at the bridge, located on the far end of the body. When the strings are plucked or strummed, they vibrate between the nut and the bridge. This vibration is where the sound of a guitar begins. How that vibration translates into sound depends on whether the guitar is acoustic or electric, as we’ll see in a moment.

Stop tailpieces are usually paired with two types of bridges. The most basic is simply a wooden or metal bar with grooves that strings pass through. Most Gibson guitars come with another of the company’s early electric era innovations, the tune-o-matic bridge. Tune-o-matics have adjustable individual saddles for each string and are therefore more desirable for most players looking to control their instrument’s action and intonation.

In 1992, two more models were added, the single-cutaway BC-40 and the 5-string B-540. Although widely admired[who?] for their high quality and lovely appointments, they proved to have limited appeal due to their $2000-plus list prices. By 1997, all four of these initial basses were dropped in favor of the B-1, a lower-priced ABG with laminated mahogany sides as part of Martin’s 1 series of guitars. The BM, an even less expensive model in Martin’s now discontinued Road series soon followed; it had laminated mahogany sides with a solid mahogany back. Also around this time electronics became standard on Martin basses. The most recent additions are the BC-15, a single-cutaway version with a mahogany top, the BC-16GTE, also a single-cutaway with solid Genuine mahogany back and sides with a gloss top, and the 00C-16GTAE, which is a slimmer thin-line version of the previously mentioned model. As a special edition, Martin offered the Alternative X Bass with jet black High Pressure Laminate back and sides and a Graffiti-patterned Aluminum finish top. This bass was very similar in build to the other guitars in Martin’s X series. There have been two Limited Edition Martin acoustic bass models. The first, the SWB Sting Signature Model, was released in 1999 and was made with woods certified by the Rainforest Alliance’s SmartWood program[citation needed]. The SWB’s top is made with book matched solid Sitka spruce reclaimed from pulp logs, the back, sides and neck are solid certified cherry, and the fingerboard is certified katalox. Sting’s signature is inlaid between the 18th and 19th frets, and a label inside the body states that a portion of the sale price is donated to the Rainforest Foundation International[citation needed]. The second and more recent Limited Edition is the B-28KV Klaus Voormann Signature model released in 2008 for the German market. It has a Sitka spruce top with Solid East Indian Rosewood back and sides and a black Ebony fingerboard. The headstock features a unique art design by Klaus as a circular inlay making each bass a one-of-a-kind. In addition to these U.S.-made instruments, Martin also markets Sigma ABGs made in Korea.
An Octaver is a cool little effect that will tune your original sound several octaves up or down in pitch. This effect can give you the ability to fill up the bass frequencies with your guitar. You can often see Jack White using this effect when he plays live with only one other drummer. He will turn on his octaver at certain points of the song to play bass lines.
Martin’s re-entry into electric manufacturing is related to the association of Richard (Dick) Boak with the C.F. Martin company. Dick Boak, with dreams of being a luthier and constantly working on guitar projects on his own, joined Martin in 1976 as a draftsman. In 1977 Boak was assigned to the project of designing an electric guitar for Martin. This resulted in the development of the E-18, EM-18 and EB-18 guitars and bass. The first prototypes of this new electric guitar series were produced in 1978, ten years after the demise of the GT-70/75, and production commenced in 1979 with guitar serial number 1000.

Other notable effects include the tube-driven Leslie speaker series, which originally modified the sound of electric organs (such as the Hammond B3) until guitarists like George Harrison (and the Beatles more generally) began to use it for spacey chorus, tremolo, and phaser tones. The classic 60s model, the Leslie 122, was housed in a huge 41-inch wooden laminate casing and comprised of two motors (essentially two electromechanical horns) that had been rotated to create a Doppler-effect-based vibrato. These horns were, in turn, picked up by the dual speaker units. The Leslie 122 wasn’t even built to connect to a guitar, but bull-headed technicians fudged the electronics and made it work anyway. The laminate wood wasn’t just for aesthetics, either: It functioned as a partial enclosure, ensuring mellower tones, and different woods created different vibratos.
Similarly to the previous model, this guitar has a mahogany body as well as a fine looking maple top. What is more, this unit has an elegant metallic gold finish that you might like. Among the features that make it stand out, we feel like it is important that we mention its practical Alnico Classic humbuckers and the fact that it has a Rosewood fretboard. Additionally, it comes supplied with trapezoid inlays.
Pacifica series of Yamaha electric guitars are the ones you have probably heard of once, mistaken for a Strat a couple of times, but never really considered. Needless to say, that was a mistake. One quick look at Yamaha Pacifica PAC510V OVS reveals why. Before even getting into details it doesn't take much to recognize the apparent quality all around.
Hi Dan! Thanks for the kind words! As somewhat of a newbie, you may find a semi-hollow-body guitar more flexible and versatile, especially if you are still finding trying to figure out what genre you are going to focus on. If you are set on the hollow-body go for, but ,if you are on the fence, the versatility of the guitar is something to consider. Those are my thoughts. Good luck!
The 5150 III EL34 50-watt head downsizes EVH's high-gain format, and boasts three channels: channel 1 (clean) and channel 2 (crunch) share the same EQ but feature separate gain and volume controls on clever, dual concentric pots; channel 3 (lead) gets its own dedicated EQ. A global presence control on the front panel and a global resonance control on the rear panel tune the power amplifier’s high and low frequency response to taste. The 5150 EL34 also takes MIDI program change commands, so you can sync it to MIDI-compatible effects units and floor controllers. The EL34 version of the 5150 is important because Van Halen’s groundbreaking early work relied exclusively on heavily-modified Marshall Super Lead heads, which used EL34s. Sat firmly in hot-rodded Plexi territory, the 5150’s channel 1 is capable of sparkling cleans, with enough gain for mildly driven blues sounds. Channel 2’s higher gain is perfect for crunch and classic rock leads, while Channel 3 launches into the stratosphere with gain levels that are cheerfully insane, yet works a clever magic trick by retaining most of the dynamics that are often lost at such extremes. This means the 5150 sounds properly cranked up, even at quite low practice levels. EVH’s 5150 III 50W EL34 is a highly-effective weapon for the modern rock and metal player that puts tone before unnecessary complexity.
2. Orange Micro Dark w/1x8 Cabinet ($288): Who doesn’t love tiny yet mighty lunchbox amps and the speakers they rest upon? The Micro Dark head uses a tube front end to push 20-watts of power and coupled with a 1x8” speaker, you’ll be able to get awesome tube tone for a fraction of the price and size of a bigger rig. This little duo is well-equipped to handle clean and overdriven tones whether you are cracking the volume on the speaker or playing through your headphones.

More often than not, we always find it interesting to see and hear if there is any possible way an entry level electric guitar can outshine or even just come close with an expensive guitar model. These comparisons would mainly starts on looking at how they are built, time spent making them, where it is made and components used on the whole guitar. Having those as criteria in mind and as reality of it. So far it is given that it is going to be all in favor of the expensive models by a margin.
The two new Fender-style solidbody basses were the Precisely and Naked. The double-cutaway Precisely U1971 had a single pickup under a chrome cover, covered bridge/tailpiece assembly, Fender-style four-in-line head, dot-inlaid rosewood fingerboard, black-white-black pickguard with fingerrest, volume and tone. The Precisely had an outlined logo decal and a sunburst finish. The Naked U1971N was the same thing, natural-finished. Both cost $250.
Some acoustic guitars, regardless of the body style, feature a cutaway in the upper bout to allow players to more easily reach the higher frets on the guitar neck. Phil Keaggy, a prolific and highly celebrated American guitarist, usually uses an acoustic guitar with a cutaway. If you plan to play leads on your acoustic, or are used to playing an electric guitar, you may prefer a guitar body with a cutaway.
peavey marshall bass tc electronic ampeg svt bass guitar laney ashdown mag ashdown cab carlsbro ashdown abm bass amp head marshall fender bass amp behringer peaveybassamp ashdown bass 4x10 bass cab sale sales roland bass amp speakers for bass amp combo peavey for sale guitar bass practice carlsbro amp fender ashdown head amplifier ampeg bass carlsbro bass bass guitar amplifier
Archtop-wise, the PEs apparently went into the ’62 and sometime in that year were renamed with the EP prefix, but otherwise remained the same. No detailed info on the full line is available, but the ’62 PE-8 had a bound fingerboard, small block or strip inlays, a single rounded cutaway, a rosewood pickguard, two � not one � metal-covered pickups (with one row of exposed poles along the edge), a chicken-beak selector on the upper shoulder, and four controls on the lower bout.
The first thing I did was solder all the colored pickup wires to their correct positions on the switch. You can solder the components on in any order you want. Make sure that all the wires go to their correct places. A lot of times the jack wire goes through a small hole in the body,  so make sure that the jack is mounted in its correct place before soldering it into the circuit. 
But this was different. This was build quality, and it completely wrecked the sound, feel and playability of the guitar. A competent pre-shipment QC inspection should have caught this and sent it back to be fixed at the factory, and they didn't. No serious guitarist would stand for ANY guitar made this way, at ANY price point. Yet there it was, on display on a guitar positioned as the flagship model of the brand, occupying the most expensive price point in the market.

: Decca's flat-top acoustic guitars seem to usually sell for $50-75. They're not highly regarded because (a) acoustic guitars don't have the collecto-mania of electric guitars, except for certain brands (Martin, Gibson, etc.), and (b) the tonewoods Decca used were inferior to solid spruce as used by the aforementioned makers. Indeed, Decca often used plywood, which doesn't yield very good tone in an acoustic.

This guitar is awesome. If you are on the fence, get off and buy it. It's beautiful and sounds awesome. I'd give it 10 stars if I could. The tone is so much better than my old acoustic. All mahogany I love it. Looking forward to years of getting better with this beauty. I have zero negative to say. Had it a few months have played everyday. I hate to leave it to go to work. Wish I had all day to play it.
Either way, the results in the Descent Reverb are nothing short of phenomenal.  If you watch the demo video below, you'll hear some of the most unique sounds capable of being produced by a guitar pedal. Pigtronix did something similar with delay and pitch shifting in the Echolution 2 Ultra Pro, but we think the combination is even better in the Descent.
Hum: other than singlecoil hum, it is almost certainly caused by a ground issue, either a faulty string ground or ground connection, or a ground loop. I highly recommend going to Star Grounding. Shielding is also recommended. See the guitar nuts site for more information on these topics. Single coils are very succeptable to rf frequencies such as emitted by flourescent lights, tv's, computers, motors etc. Also note that high load or other appliances running on the same electrical circuit can cause noises through your amp.
His tone is incredible and he is capable of an extreme vibrato that is perfect for his style of playing.  It’s obvious he’s not working hard for it.  His choices of strings benefit his economy of motion.  Even though he maintains low action on his Fender Stratocasters and even scallops the frets for acrobatic, tight-rope string walking, his ability is only strengthened by the ease of playing light string gauges.
Proceed to the next two chords. The next chord you would play would be a power chord on the fifth fret of A three times. So you would play with your index finger on the fifth fret of A, your middle finger on the seventh fret of D, and your ring finger on the seventh fret of G. Then, simply shift this finger shape down one string so that your index finger is on the fifth fret of the E string with your other fingers on the seventh frets of the A and D strings. Play the chords in the sequence that they're highlighted with parentheses below:
Proceed to the next two chords. The next chord you would play would be a power chord on the fifth fret of A three times. So you would play with your index finger on the fifth fret of A, your middle finger on the seventh fret of D, and your ring finger on the seventh fret of G. Then, simply shift this finger shape down one string so that your index finger is on the fifth fret of the E string with your other fingers on the seventh frets of the A and D strings. Play the chords in the sequence that they're highlighted with parentheses below:
The acoustic guitar is one of the most popular instruments around. It’s versatile, low maintenance and sounds great. You don’t need to lug around an amp if you’re just playing for a few friends and it provides enough volume to accompany vocals but not so much that it overshadows them. I personally love playing acoustic guitar. Everything from the sound to the feel of playing a nice acoustic is satisfying. What’s even more satisfying is learning how to play some great acoustic guitar songs. There are so many amazing acoustic guitar songs out there that it’s hard to narrow down
Thanks, guys....well, I don't think I'll be able to play any Agiles but I'll try and get my hands on some Epi's and give them a whirl. How are the stock pickups on both? Definitely in need of a swap? I had an Epi Les Paul an eon ago and don't recall liking the stock pickups, but I was also in highschool then and knew nothing about tone. Also, a quick look at Ebay indicates that any Epi SG in a color other than black or cherry will be hard to come by...
All of the complex air-coupling interactions, along with the resonant properties of the tonewoods themselves, are a key reason that different acoustic guitars will have different tonal qualities. The sound is a complex mixture of harmonics that give this type of guitar its distinctive sound. Some of the most important varieties are the classical guitar (nylon-stringed) and steel-string acoustic guitar.
The better-quality Japanese guitars of the mid 1970s to the present have rivaled the quality of many new American guitars of the same time period. It is worth considering, however, that the 1970s were almost without a doubt the worst period in the history of American-made guitars as well as numerous other American manufactured products. I am firmly of the opinion that no Japanese maker has equaled the quality of pre-World War II Gibson and Martin acoustic instruments or electric guitars by Gibson and Fender of the 1950s through the mid 1960s, but I would be quick to agree that a Tokai or Fuji Gen Gakki top-line instrument of the mid 1970s would be in many cases every bit as good and in some cases superior to Norlin-era Gibson and CBS-period Fender guitars. While "Made In Japan" had a connotation of cheap and mediocre quality in the 1960s through the early 1970s, by the end of the 1970s "Made In Japan" was often viewed by consumers of guitars and other products such as automobiles as being as good as if not superior to American. Some of the Japanese instruments have gone on to be viewed not only as being of fine quality but worthy of consideration by collectors. While I personally do not collect Japanese made guitars and do not deal large numbers of these instruments, I would certainly agree that many of them are of excellent quality and provide good value.

A vintage pickup is literally old. “Vintage-style” usually means a new pickup designed to sound like an old one. Vintage and vintage-style pickups generally have only moderate output. The term “vintage” has most often been applied to designs that originated before 1970, though as we move forward in time, so does the expiration date on “vintage.” But for now, at least, all vintage-style pickups are passive.

BTW, Superstition is not played on synth but clavinet, a stringed keyboard instrument with magnetic pickups that are, in this song, actually used like two guitar single coils. — I quite agree with all your arguments, however I prefer HSS on a strat-like guitar as it doesn't have the too-muddy-neck-humbucker problem. On a Les Paul or Tele, a neck humbucker is much more useful of course. – leftaroundabout Jun 24 '14 at 23:28
With smaller combos, it is worthwhile experimenting with their position within the room, especially when a distance mic is being used. For example, raising the combo further from the ground will result in a different reflected signal path length for ground reflections. Placing a reflective material such as hardboard or linoleum on the floor between the amp and mic will emphasise any coloration this produces. Where a small combo or practice amp lacks bass end, you can try to exploit the boundary effect by placing a mic in the corner of the room, then facing the amplifier into the corner. If the added bass is too much, move the mic and amplifier away from the corner until the tonal balance seems right.
The free GUITAR RIG 5 PLAYER is ready to rock right from the start: It offers a supreme selection of modular, high-class components, effects and routing tools, bundled as the free FACTORY SELECTION. For classic power and gain the Tube Compressor and Skreamer really come into their own, while a range of high-end effects such as the Studio Reverb and Delay Man can add that special touch. Choose from many Amp and Envelope modifiers as well as Routing Tools to further shape your sound to perfection.
What made him truly special was that, unlike other guitarists of his time who stuck to one style of playing, Jimi combined styles and used strumming alongside licks and other additions to create a fuller and more organic sound. Amazingly, he also used his thumb to do do a moving baseline whilst he was playing chords – he wanted to do what no other guitarists were doing, or were able to do and he succeeded. The way he dressed his chords with so many different sounds and rhythms just shows how naturally talented a guitarist Jimi Hendrix was. His guitar was like an extension of his body, a part of his left hand that had no boundaries.
When starting with the electric guitar, it’s not uncommon to look at experienced player’s pedal board and think “Wow, so many pedals, with different names – wonder what should I get”. And while everyone knows that the core of your sound comes from the sensibility of your touch, your guitar and your amplifier, it is also true that certain pedals can transform and shape your tone to make it more unique and personal. Before shelling out all your beloved savings on unnecessary pedals, take a look at this guide to understand the 10 basic pedals, the so-called “must-haves”. 
Yeah there is no double about it the Epiphone Special 11 is unreal value for money and even though I have over the years filled my Den with guitars some worth a lot of money the Epiphone Special 11 is my go to guitar. I just cannot fault, great tuners, pickups and basically the only guitar I have that stays in tune 90% plus of the time. It is also the lightest of my guitar collection weighing in at about 5.5lbs. For $299 Australian they are an absolute steal. If I could only have one guitar I would go to this Epiphone Les Paul Special 11 ever time.
This is a no brainer, but a value that must be considered before any purchase no less. As mentioned above, your abilities on the instrument will likely affect the price range you’re looking at, which may have an effect on the brands you shop within as a consequence. For instance, if you’re not looking to buy a high end guitar, you probably won’t even bother testing out a Gibson, as their guitars will likely be out of your range. The reverse is true as well, an experienced player on the market for high end tone probably won’t be satisfied by many of Yamaha’s offerings.

You can think of this article as a directory of sorts. There’s a lot of information presented here, but then again there are a lot of guitars out there in the world. I started this project a few years ago with the idea of creating a page where new and veteran players alike can find information about different guitar brands. I’ve got over thirty years of experience behind me, so maybe my opinions can help you make a better decision if you are looking for a new instrument.
I know a lot of you out there fancy yourself as “tinkerers”, and many of you may actually be quite good at handling repair work to your own instruments, but I’ve always been more of the kind who loves to find a good repair person. Number one, if the repairer doesn’t do the right job, or there are problems with the work they did, they have to own up to it, and make sure it’s done right until you are fully satisfied. Then of course, if they are actually a selected and accredited repair person for a given guitar company, it’s even better to bring them the guitar, rather than trying to take matters into your own hands.

1946 to present: Sitka spruce (darker than Adirondack). The change to Sitka happened on the larger "D" models first (in very early 1946). It took Martin a little while to use up all the smaller pieces of older Adirondack red spruce, hence the change to Sitka happend slower on the smaller body models. This is also the reason multiple piece Adi red spruce tops are sometimes seen on 0,00,000 bodies in 1946.
* The Chinese examples of the sunburst model that I have seen have a slightly golden-orange tone to the sunburst pattern, more like the traditional sunburst color in American guitars. The Indonesian examples I have seen have a much more over all orange look. Basswood does not have a lot of visible grain. The example guitar shown in the official Epiphone product photos, the photos you see on most web sites like Amazon and Musician's Friend and so forth, are probably a little optimistic when it comes to visible grain and the golden hued quality of the sunburst finish.
While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.
I'm a beginning player and have felt intimidated in guitar shops. That changed after walking into Grumpy's on Saturday. I didn't feel uncomfortable at all, quite the opposite. Kevin did a complete se...tup on my electric guitar while explaining the process to me. Looked at my other two guitars and (surprisingly) let me know that they didn't need anything. Such honesty is rare these days and I greatly appreciate it. I'll be back for all my guitar needs in the future. PS My son is a professional musician and has nothing but good to say about Grumpy's as well. He's a drummer but he loves the shop as well. See More
Orville Gibson founded the company in Michigan and stayed a family business until the early 50's. Ted Mcarty ran the company from 1951 or so, and is the "father" of most successful Gibson electric guitars, the Les Paul, the SG, Explorer, Flying V, ES-335 and so on.. In the late 60's Gibson was bought by the Norlin Corp, who mainly were known for making refrigerators. Most feel Gibson adopted a quanity over quality approach to guitar making during this period and 1970's to 1980's Gibson electrics are considered less desireable by most guitar collectors, and considered outright junk by many others.. Cosmetic changes to Gibson models during that period apparently reflect the poor taste of the buying public during that era... and while a 1974 Gibson SG may look ugly compared to the classic 1961 or 1968 models, please remember this was the era of ployester liesure suits and Chrysler Cordobas.. In 1986 Gibson was bought by a group who understood guitar making, and is a privately held company to this day. Gibson quality has appeared to improve steadily from 1987 to present day, but it seems to be unanimous that todays models do not approach the craftsmanship of the late 1950's when Gibson apparently peaked.
Gibson Les Paul Standard Electric Guitar This iconic instrument is regarded by many as one of the best electric guitars in the world because of its looks, sound and feel. The 2019 Gibson Les Paul Standard features a figured maple top, mahogany back and neck, rosewood fingerboard with cryogenically treated frets, calibrated BurstBucker Pro humbuckers and an asymmetrical Slim Taper neck shape for total playing comfort.
I took the Gearank scores we have calculated for individual guitars for each brand and combined them using a weighted average to produce a rating for each brand. I can best explain this by saying if a hypothetical brand had 2 models and one of them had 99 rating sources and the other one only had a single rating source then the first model's ratings would contribute 99% of the final rating for the brand. An interesting statistic; we processed more than 17,000 sources for these calculations.

Don’t worry about getting the strumming patterns down perfect. You will develop your own strumming style in time. Just try to stay in time. If you have to strum open strings in-between chords, while you switch from one to the other, that’s OK, too. In fact, sometimes, it’s even desirable. It’s what we call ‘style’. You’re main objective right now is learning the chord fingerings, and getting your changes smooth.
Gibson has been producing the Les Paul Studio electric guitar since 1983. One of the company’s lower-priced models, the Les Paul Studio was designed to attract guitar players who wanted to have the much-admired Les Paul sound without shelling out cash for cosmetic features found in upper-tier models like the Les Paul Standard. This is why the older Les Paul Studio models did not have headstock inlays and binding on the neck and body.
The ’62 EG-NT, EG-K and EG-Z were fairly primitive and appear to be leftover from the mid-’50s. The EG-NT had a small rectangular body with the bass side flush with the neck and the treble sticking out a bit to handle the controls. The head was stubby three-and-three with a circle Swan logo sticker and the fingerboard had painted diamond markers. The pickup looks to be the old slotted pickup of the early J-1, but may not be, with volume control. The EG-K was the Teisco version of the Rickenbacker Frying Pan, with a round body and neck with a head wider than the neck. This, too, had the rectangular head with a circle Swan logo. Markers were diamonds, the pickup was the slotted J-1 pickup, with one volume control. The EG-Z had an asymmetrical body with a short width on the bass side and a longer width on the treble side, with diamond markers and the stubby head. This had the old slotted J-1 pickup with volume control.
A variety of labels are used for level attenuation potentiometers (knobs) in a guitar amplifier and other guitar equipment. Electric guitars and basses have a volume control on the instrument that attenuates the signal from selected pickups. There may be two volume controls on an electric guitar or bass, wired in parallel to mix the signal levels from the neck and bridge pickups. Rolling back the guitar's volume control also changes the pickup's equalization or frequency response, which can provide pre-distortion equalization.
Copyright © 2016 Sonoma Wire Works. All rights reserved. RiffWorks and the RW Logo, RiffWorld, RiffCaster, RiffLink, RiffRumble, InstantDrummer, StudioTrack and the StudioTrack iPad App Logo, the FourTrack iPhone App Logo, GuitarTone and the GuitarTone Logo, GuitarJack and the GuitarJack logo, DrummerPack, KitPack and Discrete Drums are trademarks of Sonoma Wire Works. DrumCore and KitCore are registered trademarks of Sonoma Wire Works. iPod, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. ReWire and REX2 are technologies licensed from Propellerhead Software. VST is a trademark of Steinberg Media Technologies GmbH. All other trademarks are property of their respective owners.
Pressing a string against a fret reduces the vibrating length of that string to the distance between the pressure point and the bridge, thereby controlling pitch. On nearly every Western fretted instrument, the distance between frets is a semi-tone of equal temperament, assuring the easy achievement of strong sounding chords and single notes that fit our hemisphere’s usual expectations for rhythm sounds and melodies. Understanding the virtues and limitations created by the order of frets opens up the door to ways to escape their constricts, like bending strings, playing slide, using whammy bars, delving into extended technique or trying fretless instruments.
You’ll find a full slate of dedicated bass stompbox effects as well as many multi-effects pedals and processors. Like their guitar-friendly cousins, bass effects offer most of the same tone shaping capabilities, including chorus, reverbs, delays, phasers, and tremolos. Because of the bass’s unique sound dynamics that reach deep into the lower frequencies, many bass effects are focused around compression and limiters that help keep a lid on destructive subsonic sound waves that can damage gear. Typically, many guitar effects are not optimal when used with a bass.
Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (Some sources, or maybe just one source quoted all over the net, states that they may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. There are several photos on the net showing David Bowie in his Ziggy Stardust days playing a red Hagstrom with Kent branding on the headstock.
Now, these are known as Shaggs models because they’re what the Shaggs played, not because of some big corporate endorsement deal! No one knows who sold the Avalon brand. Mailorder? An area music store? An auto supply store? All possible. Nor who made them. Nothing like them shows up in the reference books. I’m not even sure when they were made, but 1967 or ’68 is a good guess. Japanese guitarmakers were competing with the Europeans early on in the 1960s and some of the earliest ‘copying’ was of European models.
Melodious tuning powerful pickups and with supreme body ESP is also famous for its affordable prices. This brand is famous for its quality and best for the lovers of Electronic Guitar lovers. The Japanese company was founded in Tokyo Japan in manufactures some best  brands like  “ESP Standard”, “ESP Custom Shop”, “LTD Guitars and Basses”, “Navigator”, “Edwards Guitar and Basses” and “Grassroots”.
It has a sensitivity of 96 dB, just two units short of the M50x’s 98, but the maximum input power is less than half of that model’s, at 700 mW. The impedance is somewhat higher at 47 W vs. the M50’s 38 W. Besides the price, another identifiable upside would be the lower weight, of 6.7 oz, a feature that won’t be easy to discard after spending the whole day with the headphones on.
Richie Sambora: features an alder body, a 22-fret neck with maple fingerboard, mother of pearl “star” fingerboard inlays, Floyd Rose “Original” locking tremolo, 25dB active mid-boost circuit with active/passive switch, two Fender Texas Special single-coil pickups (neck/middle) and a DiMarzio PAF Pro humbucker in the bridge position. Updated in 1999 with American Vintage hardware, dual-coil Ceramic Noiseless pickups and a 12dB active mid-boost preamp with “no-load” tone circuit and bypass switch. Also available as a “standard” version with a poplar body, rosewood fingerboard with 21 medium-jumbo frets, DiMarzio PAF Pro humbucker with two standard alnico single-coils and a Floyd Rose II locking tremolo. Discontinued in 2002.

@BLAKTORX - Charvel is a great brand for metal and shred that is really starting to regain some prominence in the music world. I really like the Pro Mod Series. Music Man, too, makes some good gear, but I tried to keep my list to 10. The Ibanez GIO series guitars are good for beginners. Seems like you're into metal. In that price range you might also check out the Jackson JS Series.

I think this is one of the better done tests. Any musical instrument is subjective, so there is no “this one sounds ‘better’”, but having an understanding of how individual components interact in the overall sound is important in a luthier. Too often players are too quick to label one guitar as sounding “good” or “bad” instead of quantifying what characteristics they do or don’t like. Building this sonic vocabulary helps a musician work their way towards their ideal instrument instead of haphazard trial and error.

The 700-series models were solid-body instruments while the 800-series models were hollow bodied. This is a small enough product range to make a nice little collection and the guitars are made well enough to be used. (Many of the early Japanese guitars were cheap and simply unplayable right out of the box. I know... I had one.) However interest in them seems to be rising and thus, prices are following along.
The rotary speaker effect is based on an actual rotating speaker system invented by Donald Leslie called the Leslie speaker. It was often paired with a Hammond organ, but in the 60’s guitar players also began using it for the unique tone and effect it gave the guitar. The original Leslie speaker cabinet used a two speaker system with a rotating horn and bass woofer drum. This created a cool, swirling effect where the music seemed to move around the room. Obviously, guitar pedals can only simulate this rotatary effect, which can be enhanced with a stereo amp setup. Of course you could use an actual Leslie speaker (or one of the newer competitors), but costs are high and it requires lugging around an extra speaker cabinet.
In May 1965 Keith Richards used a Gibson Maestro FZ-1 Fuzz-Tone to record "(I Can't Get No) Satisfaction".[24] The song's success greatly boosted sales of the device, and all available stock sold out by the end of 1965.[25] Other early fuzzboxes include the Mosrite FuzzRITE and Arbiter Group Fuzz Face used by Jimi Hendrix,[26] the Electro-Harmonix Big Muff Pi used by Hendrix and Carlos Santana,[27] and the Vox Tone Bender used by Paul McCartney to play fuzz bass on "Think for Yourself" and other Beatles recordings.[28]
{"pageName":"[mf] pdp: epiphone firebird studio electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";519377","linkInternalFilters":"javascript:,","channel":"[mf] shop","prop7":"[mf] product detail page"}
{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Nice list but how did the Hagstrom Ultra Swede not make the cut? Not only does its quality exceed most of what Epiphone has to offer (not knocking Epi, just sayin) and match many other brands 3x+ its price, it is (in my opinion) also one of the most versatile guitars I can think of. Actually, it seems Hagstrom is ignored or forgotten in what seemingly appears to be every comparison or "top ten" list available... What gives?

Chuck Berry is the true founding forefather of rock and roll. His guitar playing in the mid Fifties defined the true personality and vocabulary of rock and roll guitar so comprehensively and conclusively that it’s impossible to find any rock player who doesn’t still steal his licks, riffs and tricks today. In fact, Berry doesn’t even tour with his own band; instead, he hires local musicians to back him up, because almost everyone all over the world knows how to play his songs.

The easiest way to record bass is to just plug it straight into the console/interface—of course, using the correct instrument-level input or dedicated DI box, and not a standard line input. This will provide a nice, clean, deep tone, but it will likely lack the growl and grit that’s often desired—for that, you’ll want the sound of an amp. While you can always use a bass amp sim plug-in later, in the mix (see below), there’s nothing like the pants-flapping wall of low-end sound coming out of a real bass amp, if one is available. But most engineers will record both—a DI’d signal, and a miked-up amp. They can be combined later on, for the best of both worlds—the clean, round, depth from the DI, with the edge and midrange punch of the amp (but see below, for a caveat).
By the early ’80s, MTI was importing Westone guitars from Matsumoku, which had made its earlier Univox guitars (and the competitive Westbury guitars offered by Unicord). Wes-tone guitars continued to be distributed by MTI until ’84, when St. Louis Music, now a partner in the Matsumoku operation, took over the brand name and phased out its older Electra brand (also made by Matsumoku) in favor of Electra-Westone and then Westone. But that’s another story…
It’s curious to note that also tauted in the ’39 Grossman catalog was the National Res-O-Lectric Pick-up Unit, designed to be added to National and Dobro amplifying guitars. This was not sold as an accessory, but had to be factory-installed for $25. On single-cone guitars, the bridge assembly/cover was replaced with the pickup assembly, faced in gloss black Ebonoid. On tricone guitars the pickup would be built in to the silver cover. It’s not clear if these were also mid-’37 developments or if they appeared closer to the ’39 Grossman catalog publication date.

This guitar is one of the most popular choices for those looking for a quality acoustic guitar under $500. It comes in a dreadnought size or concert (smaller body) size. It also comes in a variety of colors (10 at time of writing). Some of the features of this acoustic are: Spruce top, rosewood back and sides, new scalloped bracing. Owners describe the sound of this guitar as full, bright, and balanced. It will surely bring a smile to your face as you strum chords for hours while learning new songs. See all the available color choices for this guitar here.

Firs, I'm a tube guy - 68 Vibro Champ, 57 Deluxe, Falcon. Next, I have hand wired boutique pedals. And C, I have owned previous Zoom iterations of this pedal, my favorite is the MS100 BT. With all that said this unit is awesome!! It's all metal and a solid build. The onboard tuner is easy to get to and has more options than I expected. I love that it is stereo out and has an aux in for my iPhone backing tracks. Now the sound - the word is the started from the ground up on modeling amps, cabs and effects. I can tell you the rocks my sox. Whether I'm going through it with my SG or my Les Paul this thing screams. From trippy ambient delays and reverb to 50's rock. The acoustic guitar tones are very convincing. All this for $200 is a steal. I would ... full review

Octave dividers, ring modulators, synthesizer pedals and distortion/overdrive/fuzz should all be considered “Tier One” effects. This means they should be treated like we treat distortion/overdrive in that the work best with the most amount to raw signal, meaning towards the very front, with the most prominent effect you’re going to use at the very beginning.
Before World War II, Epiphone was one of Gibson's fiercest competitors in the guitar market—especially when it came to archtops. With legendary models like the Broadway, Deluxe, Emperor and Triumph, they were a force to be reckoned with on the hollow-body electric guitar scene. In the 1940s, Epiphone went from one of Gibson's competitors to one of its subsidiaries, paving the way for Epiphone Electric Guitars to become synonymous with many Gibson models.  Despite this drastic shift, Epiphone continues to be renowned for their archtop electric guitars even today. Models like the Wildkat Royale and the limited edition ES-335 Pro are worthy throwbacks to that golden era of electric guitars, giving you authentic vintage sound that's perfect if you're into classic rock. Another Epiphone original that's still available today is the solid-body Wilshire. The impact that the Wilshire had on guitar design is so strong that it's still one of the first mental images that comes to mind when we think ""electric guitar.""

The MS-50G lets you use up to six of effects simultaneously, from its large pool of digitally modeled effects (47) and amps (8). And all of the settings and parameters are adjusted via its intuitive interface, albeit with just a single footswitch. You can save each preset you create or edit, just store them into the pedal's 50 memory banks. This flexibility gives you an unprecedented tone options. Other noteworthy features include its built-in chromatic tuner and its versatile power options, which include 2 x AA batteries or via a USB power source.
First of all, the pickup configuration is getting into the heavy metal side of things and, like the two previous recommendations, it offers a great introduction into changing your sounds on the fly. You know that expert players are constantly stomping on effects pedals to change the tone of the guitar, but they’re also tweaking the pickup positions, tones and volumes to create unique sounds, too.
There are two types of acoustic guitar namely the steel-string acoustic guitar and the classical guitar. Steel-string acoustic guitars produce a metallic sound that is a distinctive component of a wide range of popular genres. Steel-string acoustic guitars are sometimes referred to as flat tops. The word top refers to the face or front of the guitar which is called the table. Classical guitars have a wider neck than steel-string guitars and are strung with nylon strings. They are primarily associated with the playing of the solo classical guitar repertoire. Classical guitars are sometimes referred to as Spanish guitars in recognition of their country of origin.
The Hoshino Gakki company began in 1908 as the musical instrument sales division of the Hoshino Shoten, a bookstore company. The Ibanez brand name dates back to 1929 when Hoshino Gakki began importing Salvador Ibáñez é Hijos guitars from Spain.[1] In 1933 The Salvador Ibáñez é Hijos cy. was bought by Telesforo Julve and incorporated in his enterprise. Hoshino Gakki started making Spanish acoustic guitars from 1935, at first using the "Ibanez Salvador" name, and then later using the "Ibanez" brand name [2].
Lutherie has been my life's work since the beginning. After graduating from Roberto-Venn School of Lutherie in 1992, I set up my first shop in a rental garage, and began designing, building, repairing, and restoring fretted stringed instruments. Aided and abetted by 13 years of employment as a staff guitar repairman at Seattle's Trading Musician, I gained an extensive knowledge of the inner and outer workings of a vast array of instruments.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Frets: 24, Jumbo - # of Strings: 6 - Headstock: 3+3 - Bridge: Floyd Rose Special Tremolo - Cutaway: Single - Hardware: Satin Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickup Configuration: H-H - String Instrument Finish: Transparent Amber Sunburst, Transparent Black, Transparent Red
The body of the instrument is a major determinant of the overall sound variety for acoustic guitars. The guitar top, or soundboard, is a finely crafted and engineered element often made of spruce, red cedar, redwood or mahogany. This thin (often 2 or 3 mm thick) piece of wood, strengthened by different types of internal bracing, is considered the most prominent factor in determining the sound quality of a guitar. The majority of the sound is caused by vibration of the guitar top as the energy of the vibrating strings is transferred to it. Different patterns of wood bracing have been used through the years by luthiers (Torres, Hauser, Ramírez, Fleta, and C.F. Martin being among the most influential designers of their times); to not only strengthen the top against collapsing under the tremendous stress exerted by the tensioned strings, but also to affect the resonation of the top. Some contemporary guitar makers have introduced new construction concepts such as "double-top" consisting of two extra-thin wooden plates separated by Nomex, or carbon-fiber reinforced lattice - pattern bracing. The back and sides are made out of a variety of woods such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is chosen for its aesthetic effect and structural strength, and such choice can also play a significant role in determining the instrument's timbre. These are also strengthened with internal bracing, and decorated with inlays and purfling.
While a noise suppressor/gate is not a modulation effect, it usually works and sounds best when it’s placed either directly after or in front of modulation effects. I prefer the noise suppressor after modulation effects as this placement will mute an unwanted constant “whoosh” that often can be heard when a flanger or phaser shifter is engaged even though the guitar is silent.
There’s a bolt-on thin U-shaped maple neck, with a rosewood fretboard, and 24 extra-jumbo frets, which makes fast playing and string bending a breeze. As we highlight in our full review, the EC-10 is voiced by two ESP-designed passive LH-100 humbuckers at the neck and bridge positions, which are loud enough to cope with rock and metal lead playing, although articulate and warm when playing without distortion.
Cool guitar! And you’re right— most Harmony guitars aren’t worth much, or in other words, they aren’t very collectible. That said, I wonder how many guitarists reading this column started out learning to play on a Harmony. There are hundreds of thousands of Harmony guitars out there, and though these are mostly entry-level instruments, they’re very much a part of guitar history.
Then I remembered Kent Guitars. I thought it would be pretty cool to have a guitar with my last name on it. Although they didn't appear on the U.S. west coast very often, if at all, (I would remember them if they did), It turns out there is a whole crapload of them out there. Information is scattered around the internet in bits and pieces and nobody who was making them at the time is talking about it. So I have started gathering information, limiting myself to the 500,600,700, and 800 series models. The only ones I am interested in owning are the 700 and 800s. I have a 740, an 820, 823, 833, and 834. I may never get the chance to buy another.
Though comfortable playing many styles, Atkins was most often associated with country music and the acoustic guitar. By using a combination of his fingers and a thumb pick, he created his signature “fingerpicking” sound—a style somewhat inspired by fellow guitarist Merle Travis. Atkins even recorded a duo album with Travis, as well as with other respected guitarist like Doc Watson, Les Paul, Jerry Reed and Mark Knopfler.
Personally, I chose the Everlast version of Folsom Prison Blues because I find that the Everlast cover is so much more fun to play along with. The Everlast version is a little bit faster to play along with, but I think of a twelve bar blues while I’m doing the chord progression with this song; it really helps me to keep up and maintain a steady tempo.
Following the lead of Electro, which was having some success with their cast aluminum alloy bodies, Dobro – still a separate company – introduced its first cast aluminum Dobro Hawaiian electric lap steel guitar, probably in late 1934. Along with the aluminum lap, Dobro also debuted the Standard Guitar, and the Mandolin. Accompanying these was the Dobro Amplifier. All four listed for $67.50. These are all shown in the ’35 Tonk Brothers catalog.
I can give my own story as why I decided to go direct at shows when the band I am in uses our own PA. In a 5 piece band, with dense guitar, a busy keyboardist/organist, a 5 string bass, 3 vocalists and a cymbal-happy drummer, things were getting loud onstage. Our singer would have the monitors close to feedback all night (and it would feedback several times in the night). Live recordings, both in the room, or miked on TV or radio were a mess of frequencies, since setup times were quick, and we hoped for the best. My amp, a Mesa/Boogie with 6v6s & EL84s sounded amazing. But everyone said they couldn’t hear the vocals. When we listened back, we heard what everyone else (didn’t hear). We were a sonic mess. We tried clearing it up with EQs and amp placement. It sounded clearer onstage, but microphone leakage and feedback were still a problem, and the band had internal ‘volume wars’ with each other. Truth is, we didn’t always have a great soundperson. We were carrying a lot of gear. The venues we played and the sizes of the stages and audiences varied wildly. After several poor sounding gigs that left my ears ringing (even with earplugs), I started investigating. The first decision was to go with IEMs. This would eliminate the bulky monitors (with 1 poorly placed handle, mind you) and stop the feedback problems. It would free up stage space. The next problem was realizing that the amps onstage easily could overpower the IEMs that were directed right in our ears. So I came to the conclusion that the only way past this problem was to get rid of all of the amps. 
Lol I agree I'm a nirvana freak, not a kurt freak.... but dam fender all you can make is the same butt ugly designs that you have made for years come up with a compleatly new body design and I mean COMPLETELY NEW and just use the same components or better for a new guitar called, idk caster lol or DOUCHECASTER lol don't matter to me just hive us something new
I have a Lyle Acoustic Guitar Model 690 purchased about 1966 or 67. It appears to be in near brand new condition as I've rarely played it and it has been stored in a felt lined case its entire life. All the keys still turn, it has steel strings. I'm ready to part with it and want to ask a fair price and not get soaked. Does anyone have any idea what this beautiful instrument is worth?
Overdrive, and its noisier cousin distortion, are effects used to ‘push’ your guitar’s signal before it reachers your amplifier. Most amplifiers have some degree of drive capability built into them so you’re most likely familiar with what they sound like. Overdrive is what pushes a clean sound to break up slightly, giving it a warmer, thicker sound. This is perfect for blues and rock playing. It also serves to add more sustain to your playing, meaning notes ring out for longer. In addition to giving a noticeable boost to your volume. Distortion is effectively a more extreme version of overdrive, in that it takes the signal you’re feeding it and makes it all degrees of nasty. You’ll typically hear distortion used in heavier guitar styles like metal and punk. Here, a liberal dollop of dirt is required to give the sound its thicker characteristic.
I haven't had the pleasure of owning an Andrew White yet, but I plan to. I've followed the company and Andrew for some time after noticing repeated YouTube videos featuring unique guitars with lush, exotic tones. Since then, every time I've had a question or comment it is Andrew himself that responds quickly with pleasant and enthusiastic answers. Andrew White guitars have something different to offer and Andrew himself seems to be a down to earth guy with the passion of guitar building in his heart.
Solid body and Hollow are just two of the electric guitar types.  In many ways, the Semi-Hollow Body guitar is synonymous with Gibson’s ES series from 1936.  There have been many variants produced by Gibson itself, as well as copies built by other companies, but they all hark back to this original design.  Even though Rickenbacker first released the Semi-Hollow guitar, the ES-335 is now the mainstay in the world of guitar.
Cool guitar! You really don’t see many of these anymore. You are correct that it’s similar to the Washburn Wing series, specifically the Washburn Eagle from the late ’70s and early ’80s. In fact, aside from different fretboard inlays and brand names on the headstocks, when you compare the two they’re nearly identical. If this connection seems odd, the occurrence of very similar guitars with different brand names is more common that many of us would think.
The key to getting a great guitar sound really is in the hands of the engineer, not his equipment. I've gotten great sounds in multi-million dollar rooms, and topped them in the smallest of home studios. You can do it too. The key is to constantly experiment and apply some basic physics. Try different mics, try moving them closer and farther, try different angles, try putting the amp in a corner, try putting the amp on a concrete floor, try it on a wood floor, try it on a floor with green shag carpeting, just try anything!
There are a lot of choices out there for the prospective buyer of a fine guitar. It's no secret; a handmade instrument can cost a lot. For that matter, any of the better guitars purchased from a quality manufacturer is going to command what most people would consider to be a lot of money. Are there compelling reasons to spend your money on a handmade guitar from a custom builder rather than from a brand name factory or custom shop? There certainly are! … [Read More...]
In 1958, Gibson updated the Les Paul yet again. The new model retained most of the specifications of the 1957 Goldtop, including PAF humbucker pickups, maple top, tune-o-matic bridge with a stop tailpiece or Bigsby vibrato tailpiece. The most significant change in the new models was the finish. The Goldtop color used since 1952 was replaced by the Sunburst finish already being used on Gibson’s archtop acoustic and hollow electric guitars, such as the J-45 model. To differentiate from the earlier Goldtop model, the new Les Paul was referred to as The Les Paul Standard. Original production of the standards lasted from 1958 to 1960. Only 1,700 of these early models were made and have subsequently become highly collectible.[note 6] Original production ended when, in 1961, Gibson redesigned the Les Paul to feature a “double cutaway” body, which has subsequently become the Gibson SG. Due to high demand, Gibson resumed production of Les Paul Standards in 1968. Today, the Gibson Les Paul Standard has BurstBucker pickups on the Vintage Original Spec models and Burstbucker Pro on the lower end models bearing the ‘Standard’ name.
Wah-Wah: For swishy, rounded sounds that sort of sound like the guitar is wailing, a wah-wah pedal employs a sweeping filter controlled by a spring-loaded treadle, creating quirky frequency boosts as you work the pedal up and down. A famous version of this pedal is marketed by one manufacturer as the “Crybaby,” in an attempt to describe its tone in one word. The late Jimi Hendrix used one of these pedals to great advantage.
The Fender Hot Rod Deluxe or its big brother the Deville come to mind. I have a hot Rod Deluxe tube mode 40 watts and it really pumps out the volume. The simple foot switch allows four settings from clean, mean, beyond mean and in your face. It really makes slide guitar sound like a male cat calling to a female in heat. Also, it can be mellow. I have seen many youtube videos with Eric Clapton playing a Tweed Model. I also own a Line 6 Duo Verb, Line 6 DT50, and of course and old US Made Peavey 5150 Eddie Van Halen Signature Model. The Peavey really pumps up the heat and the sustain is as wide as the Grand Canyon.
Another Quality Ibanez Guitar ....This example is MODEL VINTAGE # V302 BS...And it IS A REAL GEM and it has a Premium German Sitka SOLID Spruce Top, WoW! what a nice original finish this one has...AAA Mahogany Sides-Neck & Back "see quality og the grain in the pics" . Lots of Full-and Wonderful rich tone from this baby. Its real ez to play & stays in tune well. It is a crafted in Japan guitar and it compairs favorably to Gibson, Guild or Martin! Please Note: If you prefer the guitar in Natural and not sunburst see our other listing for another V302 non sunburst we have in stock & available.. thank you for your interest, Joe .

Since joining Charley's team, Russell has worked on hundreds of guitars. Music shops across Dallas and Fort Worth call him with questions. He's even corrected other guitar masters' mistakes, and he's also repaired some of the music industry's finest guitarslingers, including the guitarist from Cold Play and countless prominent local musicians. "It's part of the joy is knowing that I'm helping put players in a position where they can get on stage and feel confident knowing their guitar is working at its peak." He's also probably the only guitar master on this list asked to restore a broken guitar back to its original broken state. But it wasn't just any broken guitar. It was Elvis Presley's Martin D-28. "Elvis had broken it." This guy is truly more than a guitar master; he's a magician performing musical magic at Charley's five days a week.
The guitar is an instrument capable of truly heavenly tones but capturing this sound in a recording is never as straight-forward as you'd think. Here at Prime Loops we've been changing strings, tweaking amps and adjusting mics to deliver only the finest tone imaginable to your DAW! We used a 1985 Gibson Les Paul electric and a Martin DC-16RGTE acoustic with Fishman, Marshall and Orange amps, recorded through an AKG C214 microphone, so STUDIO GUITARS guarantees to make the hairs on the back of your neck stand on end!
By the turn of the century, new-metal grinders and post-grunge plodders had given loud guitars a bad reputation. Then Jack White hit the reset button. With each savage riff, he reconnected hard rock and roots music and showed that a blues-based band could escape what he calls "note-pushing Stratocaster white-blues bullshit." And he didn't let his analog leanings prevent him from ingenious use of a DigiTech Whammy pedal – the secret behind the faux-bass thunder of "Seven Nation Army" and the screaming leads of songs like "Ball and Biscuit."
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Ash - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black - Pickups: Ibanez - String Instrument Finish: Natural Blue

The Neal Schon Signature Les Paul model has a carved mahogany top, mahogany back, multi-ply black/white binding on top, chrome-plated hardware and a Floyd Rose tremolo. The one-piece mahogany neck has a scarfed heel joint a “Schon custom” slim-taper neck profile. The 22-fret ebony fingerboard features pearl split-diamond inlays and single-ply white binding. The pickups are a DiMarzio Fast Track/Fernandes Sustainer in the neck position and a Gibson BurstBucker Pro in the bridge position. In addition to the standard Les Paul electronics (individual pickup volume and tone controls, plus three-way selector switch), the Schon Signature features two mini-toggles – an on/off for the Sustainer and an octave effect – along with a push/pull pot for midrange cut. Only 60 of the guitars were made, and sold it out in days upon release.
Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.
As the market for iOS devices and apps has grown, so has the availability of affordable stompboxes and processors that can store downloaded effects. Being able to sample, purchase, and download effects through an iOS app or digital download gives you access to a whole new palette of sounds. Though relatively new, in years to come this may well become the way in which most players will assemble their effects libraries.
The following chart will help you choose the right sized guitar for your child. It is important to note that guitar size is only one part of making it easy for your child to play. An un-adjusted guitar will not be easy to play, even if it is the right size. Here at, each guitar is inspected, properly adjusted and set up so that the strings are easy to press down and the notes ring clearly.
Let’s learn the basic layout of Tabs. When you take a look at a Tab that you want to learn you will most likely see some standard notation on top and the Tab on the bottom. The six strings of the guitar are represented by the six horizontal lines of the Tab. The top line represents the high E string of the guitar and the bottom line represents the low E string of the guitar. This can seem a bit counterintuitive to some people so just remember that the top line is the thinnest string and you will be good to go.

The newly designed Les Paul Recording guitar was released in 1971, in many ways as an updated version of the Les Paul Professional that had debuted two years earlier in 1969. The new guitar came with a new owners manual explaining the (somewhat complicated) controls, their operation, and giving other specifications, including recommended strings, action and control settings. Compare with the broadly similar owners manual for the Les Paul Personal / Professional
Benefits of this system are fairly obvious. You get to choose which source to use based on the venue you are playing at. Let's say the stage you are about to perform on has a number of large monitors pointed directly at you. In that case, you'd definitely want to stick with a piezoelectric pickup. On the other hand, if there are no monitors around, you can use both or only the microphone. Alternatively you can mike your acoustic guitar with external mics, which is great in isolated situations such as a recording studio.
As a trained engineer I just don’t see how contemporary luthiers would be able to control only these three parameters in combination in order to make up a specific tone. There is simply no connection between these and the sonic impact they have–again, in combination. Did anyone ever change the shape due to the wood he uses? For instance wood would be lighter by 5%, stiffer by 8% (which would be very much, by the way, but it happens all the time even with the same species) so consequentially make the horn less thick by 3% and trim the tail by 5 mm. A rule like that would be plausible in case wood would affect the tone that much. But luthiers never do. Thy do not even take care of weight and stiffness.
Note that the information presented in this article is for reference purposes only. Antique Electronic Supply makes no claims, promises, or guarantees about the accuracy, completeness, or adequacy of the contents of this article, and expressly disclaims liability for errors or omissions on the part of the author. No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, or fitness for a particular purpose, is given with respect to the contents of this article or its links to other resources.
We make our Tone Bars / Ferrule Blocks (tone slugs) out of 360 brass and use them on most all of our string through custom guitars. You will notice an enhancement in sustain and beauty.  The ones sold here are not polished. Go to to purchase slugs that are polished. Please ask any questions you might have about the Slug. I offer quantity discounts.
For guitarists who must have original-era Strat® sound, look and feel, the Classic Series '60s Stratocaster Lacquer epitomizes the instrument during its second decade, when musicians used it to conjure and create electrifying sounds never before imagined or experienced. With authentic features including a nitrocellulose lacquer finish in classic Fiesta Red, everything about it takes you back to a wildly creative time when rock music came into its own—from surf to psychedelia and more—and players started to discover in earnest just what a phenomenal instrument the Stratocaster really was.
Why would that be “magical thinking”? Unless you play a sine wave with a synth, the timbre of every instrument is made of a set of freuquencies, a dominant frequency plus a ton of harmonics (which is, I take it, the overtones people talk about). Woods, like every other material, resonate at particular frequencies, and consequently might emphasize a particular subset of these frequencies rather than another subset. Hardly magical thinking.

The thing is, if you aren’t a pro (and if you’re reading this, you probably aren’t) you don’t need to concern yourself with every element of the electric guitar. You just need a briefing on body styles and pickups, arguably the two most important pieces of a guitar’s build. More importantly, asking yourself a couple simple questions about what you’re after will help you immensely. We’ve got all that right here, plus a few great axes that should at least serve as starting points on your search. As for the Ziggy Stardust jumpsuit and the perfect rock-god pose…look elsewhere.
The lowest note on the double bass or four-stringed electric bass is E1, two octaves below middle C (approximately 41 Hz), and on a five-string it is B0 (approximately 31 Hz).[22] The requirement to reproduce low frequencies at high sound pressure levels means that most loudspeakers used for bass guitar amplification are designed around large diameter, heavy-duty drivers, with 10", 12" and 15" being most common. Less commonly, larger speakers (e.g., 18") or smaller speakers (e.g., the 8x8" cabinet, which contains eight 8" speakers) may be used. As a general rule, when smaller speakers are used, two or more of them are installed in a cabinet (e.g., 2x10", 4x10" and 8x8"). For 12" speakers, combo amps and cabinets are available with 1x12" and 2x12"; less commonly, 4x12" cabinets are seen. For 15" speakers, combo amps and cabinets usually have 1x15", although 2x15" and even 4x15" cabinets exist (Lemmy Kilmeister of Motorhead used 4x15" cabinets). A small number of 1x18" bass cabinets are sold (e.g., Trace Elliot).
:I purchased a Dorado Model 5990 in 1972 new and it was DISTRIBUTED by Gretch, made in Japan. This is a low price "starter" guitar that equals many higher priced brands. I can let it sit for weeks and it stays in tune. Age has mellowed the sound and it plays as well as any fender, Gibson, or even Gretch, of equal construction all things considered.

Wife wants to play guitar again after a long hiatus. My full sized Takamine with fat strings is too big and heavy for her. Got her this 3/4 Yamaha and I fell in love with it. I may have to get another one for her because I've been hogging it. It has a great voice for a 3/4. The action is nice, the built in tuner is a real treat. Never had one before but it is unbelievably convenient. I don't plug it in often but I had to check out that sound too. The electronics sound decent. Can't crank it up too loud or it starts to feedback, but I'm actually sitting right on top of my small but punchy VOX amp so I can't really say how it would work for playing out. The reviews convinced me to buy this one. The best review only had one major complaint; the tuning pegs. I agree they could be better, but I don't think they are awful. I have to tweak the tuning just a little once or twice a day before I play, but it isn't like it goes out of tune when I'm playing, even when I'm beating on it hard. I think it is well worth the price and was surprised by the volume it produces. Much better than expected. If you don't find the tuning pegs worthy, I think the instrument is good enough to spend money on for an upgrade, but I don't plan to. It is solid, light weight, comfortable, nice sounding, well designed, feature rich and handy. I'm keeping it in the corner by the bed and I pick it up every chance I get. I haven't played guitar much the past few years so having a guitar at my fingertips all the time is helping me get my callouses back quickly. No matter what you play, if you lose your callouses, rebuilding them is always painful for a few weeks, but this instrument is pretty easy to play. I've gone through the process several times over the years with my Takamine. This is far less painful. Perhaps that means it will take longer, but at least I can still use my fingers to type long reviews in the meantime. No avoiding the pain regardless of what you play, but there is pain, and there is agony. This guitar hits a sweet spot somewhere in between. It's just right for young or old, big or small. (FWIW, I heard an interview with Clapton where he confessed he doesn't play much when he's not working and when he has to prepare for a tour, even he has to go through the callous building process). Well, I'm way off topic now. Again, great little guitar. Go for it.

If the wood is the foundation of the structure, of course it will contribute to how the guitar sounds. Most people who argue that wood doesn’t affect the tone say that the string cant be affected by the wood because it is suspended between the metal parts of the guitar. If this were entirely true, you wouldn’t feel vibration in the guitar body. If the body of the guitar is vibrating, then it is going to affect the vibration of the string. The foundation of a structure will affect how it reacts to vibration.
I’m assuming rock guitar players so i’d say Jimi Hendrix, (I don’t personally like him but just about everyone else does) a good album of his would be “Are You Experienced?” or “Electric Ladyland”. Eric Clapton’s good stuff would be his records with Cream, mainly “Wheels Of Fire”. Van Halen’s first album (Just titled” Van Halen”.) Then Led Zeppelin 1, Led Zeppelin 2, and Led Zeppelin 4. A good Rush album would be nice too, either “Moving Pictures” or “Permanent Waves”. You might not see this but you should make sure he doesn’t have any of these yet and that he’ll like them.
You know Eddie Van Halen, that legendary guitar player who pretty much knocked the music world on its ear with his innovative sounds and playing style back in the late ‘70s. For years he partnered with brands such as Kramer, Ernie Ball and Peavey to create signature models of his guitars, as well as the real guitars he used onstage. Now he has his own company: EVH.
Very disappointed! This was a gift from Santa this morning and the amp failed miserably. Would not work at all. Not with a battery or an adapter(which by the way is not included). Amp started to smell like it was burning/melting even though it showed no power at all. Son is very disappointed to say the least and so is mommy. Only thing he wanted was an electric guitar and he couldn't even enjoy it this morning. How do I explain returning it to Santa...

The first step is to determine what’s in your pickup already. The most common magnets for humbuckers are (roughly in order of strength): alnico 2, alnico 4, alnico 5, and then various types of ceramic magnets. In simple terms, the stronger the magnet, the greater the potential output. But you can’t just look at magnetic strength alone, because stronger magnets also affect the string’s ability to sustain.
There are many different kinds of pickup selectors. The most common forms of pickup selectors are 3-way and 5-way switches. Obviously, a 5-way switch gives you more pickup combinations than a 3-way switch. Below are some diagrams of what 3-way and 5-way pickup selectors can do. In choosing a pickup selector, I suggest that you try to replace your pickup selector with the same kind of selector. Refer to the manufacturers website and wiring diagram to get the right specifications. Notice I said to get the same “kind” — not the same one. It would make no sense to replace a cheap selector with another cheap selector. Find out the specs on the old selector and buy a nice one.
Your fighting skills are legendary — you have all the right moves, the sharpest strategies and the guts to battle your way to the top. But when you enter the Mortal Kombat Tournament, the competition rises to a whole new level. It will take everything you have not only to prove you're the best, but to stay alive. Hang on tight because, ready or not, you're in for the fight of your life. Mortal Kombat X delivers the fast-paced fighting action that fans of the franchise have come to know and love, fueled by brand-new technology that elevates your experience to the next level. Enter the brutal world of Mortal Kombat with cinematic presentation that offers stunning visuals. Rise to the challenge of the competition with all-new gameplay. Craft your fighting and strategic styles with the ability to choose from multiple variations of each character. Prove your dominance with fully connected online play that lets you decimate the competition and show you're the best in the world. Steel yourself for battle — the fight for global supremacy, and your life, is on.
There are lot of great amp out there, but there are overpriced. Peavey prove they can do almost as great as other for a really more decent price. Moreover, they have great features and technical improvement that the "classic" manufactureres avoid to be focus on vintage sound and their reputation... The bandit 112 is a bargain. The valveking series was great budget valve amp for metal. Classic 30 and 6505 are interesting too. Vypr series was also great but it seems their recent series have issues... Anyway they build great amp and doesn't scam people as others do... check it out!

I began taking guitar lessons from Kenneth when I was 14, and right away, I noticed his ability to mold the lesson into an experience that fit 𝘮𝘺 musical interests and what I wanted to learn. Whether I wanted to learn theory, practice a certain technique or rudiment, or just have fun learning a song, Kenneth could always adapt and make the lesson interesting and enriching. This is a quality that many music teachers lack, and it’s the aspect of his teaching that kept me enticed for so long. In addition to being a great teacher, Kenneth is a passionate music fan of many different genres, and through taking lessons with him, I was exposed to many new musical concepts that opened my eyes to the world of music I was yet to discover. Though I no longer take lessons, I can say for sure that my time with Kenneth has made me a much more skilled, receptive and well rounded musician, and I am very thankful for all the things I learned.
Although I left it up to our panelists to decide what they think is most important in a beginner’s amp, we all agreed on a few parameters. First, the amp should have no glaring technical flaws—it shouldn’t produce excessive amounts of noise or hum, and it shouldn’t exhibit audible signs of distress, such as buzzes or rattles. Second, it should produce enough volume that the guitarist can jam with instruments such as piano, saxophone, and a small drum kit.

We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening and lubing the machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .010 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!), cleaning and polishing. One of the best things about this guitar is the modification to a factory flaw that most TW's we've seen have. The finger board is too long from the nut to the first fret, thus most all of these we have seen will not intonate, thus not play in tune. We had a compensated nut, modified and installed on this one (see photo collage). I don't know where they acquired it, but it worked like a charm. Plays and sounds great. We also installed a new set of .010 "Round-wound" strings. Guitar looks near new and plays great. No case.
Lastly, there's Session mode. When you need to take a break from structured lessons or just want to shred for a while, enter this mode and play to your heart's content. Rocksmith 2014 will even provide you with a backup band: tell the game what instruments you want in your power trio or quartet and the AI will follow your lead on the drums, bass, keys or anything else in its arsenal. We highly recommend the kazoo.
Once the old selector is removed, screw the new selector in place. Follow your wiring notes from the old pickup selector, strip the wires with a pair of wire strippers, and solder the wires to the correct lugs. After everything is soldered in place, reattached the cavity cover or pickguard. For more information about how to solder wiring, see the soldering page.
Here is a list of the schematics that are exclusive to this site. We created several and we have redrawn some schematics that were already available on the internet  for readability or ease of use (these needed an easier-to-read format, corrections or part identifiers).  Many of these schematics include “modernization” that are included and explained in the “Project” for the given schematic.  You may freely post links to any of the pages or files on this site, but please do not put copies of these files on your site. We frequently update our files.  If you want to see photos of the original units of any of these guitar effects see our  “Originals” board on Pintrest  Note: All Trademarks mentioned here belong to their owners and not to General Guitar Gadgets
My 5056 has pretty high action on it, and these guitars are very bad candidates for neck resets, as the necks were glued with epoxy, not hide glue (which can be softened with heat). Anyone who looks at buying a vintage Alvarez should bear this in mind if the action is high. There may be no practical remedy (Search web for comments on it.). And those who own them should probably stay away from heavy string gauges, i.e., not bigger than .12's on high "E". I now de-tune my Alvarez guitars when I put them away for longer period storage even though I use 11's on them. If you do use heavier gauge strings, you might want to de-tune when putting away the guitar. Just a suggestion. Cheers.
ok thank you so much! Unfortunately, it’s not as loud as the other single coils of my strat. I tried splitting to the other coil but doesn’t split. I followed the wiring diagram bit by bit. =( Thank you so much for responding right away. I’m a session musician here in our country and this is actually my first time to mod my guitar. Thank you so much!
In recent years, convolution reverbs have become both affordable and commonplace. These differ from synthetic reverbs insomuch as they work from impulse responses (or IRs), recorded in real spaces to faithfully recreate the ambience at the microphone's position when the IR was made. Sometimes these are referred to as sampling reverbs but there's no sampling involved as such, even though the process seems akin to sampling the sonic signature of a room, hall or other space.
Ibanez RG20061, also known as the RGT220A CAH, is an RG series Prestige limited edition guitar model specially created for the 2006 Winter NAMM Show. It based on the RGT220A, but stained brown, although claimed to be barbecued to a chocolaty brown color. Features include a neck through body construction, ash body wings, Dimarzio IBZ pickups and the Edge Pro tremolo. Only 153 Made 8/10 Condition
Breedlove Guitars was established in 1990 by luthiers Larry Breedlove and Steve Henderson, while working at Taylor Guitars. After moving to Oregon, Breedlove and Henderson began specializing in custom, fingerstyle six and twelve string guitars. In 1991 the first Breedlove guitar model appeared, after experiments with the JLD bridge truss system and various bracing techniques. Around 1994, Larry’s brother, Kim Breedlove, joined Larry and Steve as a master craftsman. Breedlove strives to be environmentally conscious, and is “dedicated to selecting alternatives to endangered rainforest woods.”[1] Breedlove has since expanded to include mandolins and ukuleles.

Replacing pickup rings and restoring covers. These rings are usually plastic and cannot be restored but covers are normally metal on Les Paul styles. You may not want to rub steel wool across your covers so follow the method of cleaning painted bridges to avoid unwanted scratches. Also, replace your pickup rings properly with rings that are the same length and/or color and make sure the screw holes do not need to be resized.

As mentioned earlier, technically, magnetic pickups are small magnets with fine wire coils. These small magnets produce a magnetic field around them. When the metal strings of the guitar are strung by the user, a vibrating motion is generated inside this magnetic field which changes the magnetic flux of the field. According to the law of electromagnetism, this change in the magnetic flux produces an electric charge in the wire coil around the magnet.
Chorus: Though it can be overused, light distortion works well as a filler for choruses in Christian worship and most other genres.Verse: You won’t typically hear a distorted verse, though at times a two guitar group can make this work. Generally, you’ll want to leave distortion for the higher intensity portions of a song.Bridge: A lot of Christian songs tend to lower intensity during the bridge, which means light distortion becomes a little less usable. Though for bridges that keep the tempo up, it can work pretty well.
The EB-18 was the first electric bass the Martin company produced in 1979. The single-pickup EB-18 was a partner to Martin’s E-series electric guitars. Its scroll-shaped headstock was reminiscent of the Stauffer-style pegheads of early Martins. The EB-28 was added to the line a year later. It had a mahogany body and PJ pickups. Both models were discontinued in 1983.

There’s another wrinkle: vintage-style pickup magnets can weaken over time, resulting in a softer, smoother tone. Some pickups are designed to mimic this ageing process. Say you were looking for a vintage P.A.F.-style humbucker: You could choose between one of our models that that sounds like a pickup straight off the late-’50s production line (the Seth Lover humbucker), and another that mimics a similar pickup as it would sound and look today after decades of wear and tear (the Antiquity humbucker).

The two mini Les Pauls are also illustrated in ’60s Bizarre Guitars. These were the J-1 and TG-54, slab-bodied solidbody electrics with bolt-on necks. Both had typical Teisco three-and-three headstocks, with a point or hump in the center not unlike Kay guitars, but slightly more rounded. They had rosewood ‘boards with large white dots, except for two small dots at the octave.

There's no reason not to try an effect if you want to. Sure, some kind of effect might mask some bad habits (reverb and delay might sort off mess your timing), but distortion for example is almost like playing another instrument, and if you're into punk/rock, the sooner you try it the better. You will have to figure out ways to mute the strings and reduce string noises, which is part of the technique.
The Teisco TG-54 was a two-pickup Les Paul, named for the year it was designed, 1954, not long after the original! It had a large white plastic covered pickup at the neck, set into the pickguard, and a slanted metal-covered pickup set into a metal tailpiece assembly, sort of like a Telecaster. Again, strings passed through the tail assembly and the body. Similar to the J-1, the volume and tone controls (same knobs) sat on a small rectangular plate, this time metal like a Tele, with an added chicken-beak three-way rotary selector switch.

Ibanez LGB30 George Benson Electric Guitar   New from$1,099.99Only 2 Left!or 12 payments of $91.67 Free Ground Shipping Gibson 2017 Les Paul Studio Worn T Electric Guitar (with Gig Bag)   New from$799.00In Stockor 12 payments of $66.59 Free Ground Shipping Epiphone Les Paul Standard Plustop PRO Electric Guitar   New from$599.00In Stockor 12 payments of $49.92 FREE 2-DAY SHIPPING Gibson 2018 Les Paul Tribute Electric Guitar (with Gig Bag)   New from$1,149.00In Stockor 12 payments of $95.75 FREE 2-DAY SHIPPING See All Electric Guitars: 6-String