He was barely known for decades after his 1938 death. But the 29 songs Robert Johnson recorded in 1936 and 1937 became holy writ to rock guitarists from Clapton to Dylan. They were dazzled by the way he made a guitar sound like an ensemble – slide and rhythm parts yelping in dialogue, riffs emerging from the mist. Dylan remembered playing King of the Delta Blues Singers, the 1961 LP that rescued Johnson from obscurity: "The vibrations from the loudspeaker made my hair stand up. The stabbing sounds… could almost break a window."
While some Supros were more or less re-branded Nationals, many represented totally unique designs in the Valco line. When the Supro equivalent to the National Grand Console was introduced in 1958, it featured a radically different body design. In place of the National’s conventional all-wood construction, the Supro 1475B Console Sixteen featured two wooden necks connected by three chromed metal rods that ran all the way through each neck. It’s not obvious why this design was chosen; it doesn’t have any advantages other than its unique aesthetics, and I don’t believe it could have made construction any cheaper. The Supro was cheaper than the National – $175 vs $235 – but the difference was likely due entirely to the more “exclusive” name on the National.
Before we go into the parts of an electric guitar, it’s worth noting that there are three different body types: solid body, hollow body, and semi-hollow body. The main difference between them is the way the bodies are constructed, and the amount of resonance they produce. If you’re into punk, rock, metal, or any style of fast or heavy music, then it should be solid body all the way. It allows for louder sounds and more sustain, while avoiding the feedback issues that affect some hollow bodied instruments at higher volumes. The hollow and semi-hollow bodied guitars on the market will appeal to players who prefer softer styles, such as jazz, country and blues, as well as soft rock and pop, as they offer a full, rich and more resonant sound with lots of bass. Beginners will be best off sticking to a solid bodied guitar, as they are easier to handle in most scenarios. For the rest of this anatomical breakdown we’ll focus on solid body guitars.
A rackmount effects unit may contain an electronic circuit nearly identical to a stompbox-based effect, but it is mounted in a standard 19" equipment rack, which is usually mounted in a road case that is designed to protect the equipment during transport. More recently, as signal-processing technology continuously becomes more feature-dense, rack-mount effects units frequently contain several types of effects. They are typically controlled by knobs or switches on the front panel, and often by a MIDI digital control interface.
History aside, modern-day Ibanez guitars are amazing instruments. They offer a very distinctive value and bang for your buck that is simply hard to match by other manufacturers. Ibanez has become huge in shred (fast lead playing) guitar and metal circles. High profile virtuosos like Joe Satriani, Steve Vai and Paul Gilbert have been greatly responsible for securing Ibanez’s place in super-fast, incredibly technical, shred guitar playing. Not to mention that Ibanez electric guitars simply feel “easy” to play, fast and comfortable. As far as ergonomics and playability, Ibanez guitars are hard to beat. Plus, you can get some very good inexpensive models too. If I where going to call a brand, “the Toyota of the guitar industry,” it would be Ibanez.

While electric guitar manufacturers like this are often more expensive, they do provide a level of customization that isn’t available with several mainline models. Most companies of this size can have a casual email or phone conversation with you, take a few notes about how you want your guitar setup (probably jotting it all down with pen and paper) and then making a guitar to your exact specifications.

Eight-string electric guitars are rare but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars. The largest manufacturer of eight- to 14-string instruments is Warr Guitars. Their models are used by Trey Gunn (ex King Crimson), who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars, and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the seventh and eighth strings. Stephen Carpenter of Deftones also switched from a seven-string to an eight-string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK, which is the first mass-produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.
Starting from the body, we see the standard Les Paul shape. The tonewood of choice is mahogany, as expected, but this time it comes with a maple top. The top of the guitar arches slightly just like the original Les Paul does. In terms of details, we see a white binding around the top section that really stands out on the dark matte finish.  It's something to behold.

Thanks for the list. Michael Gurian was a luthier in NYC who began as a classical guitar maker then began making steel string instuments in the 1960’s , I remember seeing his instruments shortly after i bought My first Martin in the dog years of the 70’s along wi Don Gallaghers instruments. Recently acquired one of his jumbos in Brazilian rosewood made in 1971 still in remarkable condition. He was among the first to compete as luthier with the big boys at Martin and gibson , even before Bob taylor jumped in.
Next up is another electric guitar from Fender Standard, namely the American Special Telecaster. This one has two Texas Special Tele pickups and it’s perfect for great American genres like country, rock and blues. This American Special Telecaster has a lovely alder body and the neck is maple. Just like number one on our list, the 50’s Stratocaster, it’s vintage-looking, but the Vintage Blonde model we’re reviewing looks vintage in a cooler, less sentimental way.
Wiring: If you chose the optional snap together wiring, then all of our instruments come pre-wired and pre-soldered, so that you can assemble the instrument without needing to do any soldering. You simply snap a few connectors together to complete the electrical connections before you screw down the pickguard, control panel, and output jack plate. This is detailed on the guitar kit wiring and hole drilling description page. If you would prefer to not have your kit pre-wired and pre-soldered, please let us know.
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
This mod revolves around the concept that adding mass to the headstock lowers its resonant frequency, while reducing mass will raise that frequency. The theory at work here is that vibration is absorbed or reflected back into the strings and body based upon this frequency. Depending upon the harmonic makeup of your particular instrument, changing this can enhance or degrade sustain and accentuate or attenuate certain harmonics. All of this is dependent not only on your guitar’s construction, but also on how large your headstock is to begin with. If all of this seems a bit hazy, that’s because it is. I don’t have a handy-dandy answer like “more mass equals more sustain” because it isn’t always true. Suffice it to say that you can make a difference in a guitar’s character by following this path. I usually go through this exercise with my builds because I have the luxury of time and the resources at hand. It’s like fine tuning a race car’s suspension settings to your liking.
Lastly try a fuzz pedal like a Fuzz Face or Big Muff. Fuzz pedals offer huge amounts of drive and low end but are generally used for single notes and power chords. Regular chords can sound pretty nasty with fuzz and it’s probably a bit wild for acoustic guitars. Although if it works with your style and draws the congregation into worship, then why not? The important thing is to be tasteful and selective in how, when and how much you use effects. Follow the golden rule; a little ‘salt’ can bring out flavour but too much kills the dish altogether.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst

"The development of the modern tuning can be traced in stages. One of the tunings from the 16th century is C-F-A-D. This is equivalent to the top four strings of the modern guitar tuned a tone lower. However, the absolute pitch for these notes is not equivalent to modern "concert pitch". The tuning of the four-course guitar was moved up by a tone and toward the end of the 16th century, five-course instruments were in use with an added lower string tuned to A. This produced A-D-G-B-E, one of a wide number of variant tunings of the period. The low E string was added during the 18th century."[48]

2) Use a line-out box (I use the Suhr Iso Line Out box) between your amp and dry speaker cab to take a tap off the dry signal. Run the line-out signal into a small mixer, and run the outputs of the mixer into a stereo power amp and two guitar cabinets. As with the previous rig, use the mixer sends and returns to patch in effects—which you will set at 100 percent wet (no dry signal) and blend to taste. In this setup, you can blend the dry signal into your “wet” cabinets. For live applications, mic all three cabinets, and pan the wet cabinets hard left and right in the PA. This is the setup I use, and I was inspired to go this route by guitarists such as Steve Stevens and Eddie Van Halen. I like to blend a significant amount of dry signal into the wet cabs. In the PA, the sound is absolutely massive! I also use an expression pedal to control the amount of effects in my wet cabs, so I can tailor my delays and reverbs on the fly.
1928 to 1967: Tortoise grain celluloid pickguards glued directly to the top, clear finish then applied over top and pickguard. Due to extreme shrinkage of celluloid and lacquer, this often causes a "pickguard crack" in the top. Pickguards became "standard" in 1931 on most models, but some martin guitars had them as early as 1928. The OM series was the first model to consistently have a pickguard in 1930.
Input kewords into the searchbox at the top of each page, then click the WHAT'S IT WORTH button. The search engine will find matching pages based on keywords you type into the Search Box. The engine searches all categories of objects, not just this particular category, so you may get some irrelevant items in your search results. Too many results? Be more specific. Not enough results? Be less specific.
Guitarists have their own special system of music notation called guitar tablature, or "guitar tabs" for short. Using guitar tabs, a guitarist can play a wide variety of music without ever having to learn how to read standard sheet music. Though guitar tabs aren't a perfect way of describing music, they've allowed newer generations of guitarists to quickly and easily share information about how to play songs across the globe via the internet. Every guitarist should have at least a basic understanding of how to read tablature - it's the de facto shorthand for much of the guitar music you'll find written out online.
Solder the electronics. The pickups you purchased should come with a schematic that shows exactly how to connect these to the controls and to the input for the guitar cord. Follow this schematic, using an ordinary electronics soldering iron to complete the job. Wrap any wiring connections with electrical tape, unless the manufacturer’s instructions suggest another method.
What? I have an early 90s pe and I've recorded with it and its one of the best guitars I've ever played. Beutifull clean lp tone and ballsy as when you dirty it up. I also have a pro 2 fullarton which with the fender lace sensor pups I put in it, plays and sounds as good as any strat I've played in thirty years. Check the new arias comming out of the states at the moment and they are really awesome looking guitars. There is also a reason the early ones are known as lawsuit guitars as Gibson though they were so good they had to sue them!

Just knowing three chords will enable you to play all of these, albeit sometimes in a key that doesn't suit the song too well. As Rockin Cowboy illustrates, chords come in 'families', so if you understand that, songs become far more predictable. Sometimes I play with others, and when they try to explain that this new song 'has G, C and D in it', all I need to know is the key - in this case, G. The other two chords are virtually inevitable, but that fact seems to have escaped them!

However, unlike a boost pedal, the overdrive effect is not dependent on the amplifier to have a distorted sound. The overdrive pedal will internally boost the input signal so much that the top of the signal wave will be forced to naturally shrink itself. This is called soft clipping and it simulates amplifier like clipping as though an amplifier was being overly driven, hence the name overdrive. The distortion pedal will also boost the input signal but will then add resistors within the circuitry to not just shrink or soft clip the wave form but completely flatten the wave peaks. This is called hard clipping. For more understanding on the differences between soft clipping and hard clipping see the illustration below.
The material in the neck and fretboard also matters. Some guitars have both neck and fretboard in maple, and they will typically have a bright and open sound. Rosewood has traditionally been used for fretboards, usually combined with a maple neck, because it is a hardy and oily wood that can stand up to extensive human contact. Rosewood will give a darker tone than maple alone.
Gibson did not take Fender too seriously at first; Fender were just an amplifier company that made a few guitars. They didn't regard the solid-body Broadcaster launched in 1950 as a serious musical instrument, lacking the depth of tone of a Gibson electric-acoustic. But music was changing, guitarists wanted different sounds, and music was getting louder. Fenders instruments proved to be more appropriate for the emerging musical scenes. Over the next decade Fender created a number of solid-body guitars that defined genres. Guitars like the Stratocaster, Telecaster and Precision and Jazz basses proved to be exceptionally popular and have stayed in production ever since.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: ovation","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"ovation","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
do you have any iOS devices? So far Garageband and Guitarism are the most convincing guitar emulators ive heard yet. Next to that, for VST i go with RealStrat. But still, its going to track midi for notes that do not exist on a guitar. So while it wont play those incorrect notes through realstrat, it will make exporting midi to tab or sheetmusic a nightmare. Dont sleep on the iOs stuff, particularly because of the input and control methods. You have no idea the difference between a fake strum on a touchscreen versus all manner of keyboard inputs. You spend most of your time trying to emulate plucking in VST guitar apps...
This tonewood isn’t a very common wood used. But, when it is used on a solid-body guitar, you’re definitely going to have access to deeper, richer, and woodier tones. However, pair it with a Cedar top and you can have bright and warm overtones. Paired with a Spruce top, you can play to get an aggressive bite on the trebles with a definite presence on the low end.
As cool as these little amps are, they only have a fraction of the features you’ll find in their larger, more powerful big brothers. But, they are more than enough for a newbie to get started on, and they meet and exceed the criteria I outlined in the beginning as what to look for in a good starter amp: They sound good, they are flexible with good overdrive, multiple channels, solid EQ sections and some even have built-in effects.
Epiphone is regarded as one of American’s oldest and most revered musical instrument manufacture, which was founded in 1873 by Anastasios Stathopoulos. Their headquarters located in  Nashville, Tennessee, United States. Their produce amplifiers, mandolins, banjos, effect units etc. The company is owned by Gibson Guitar Corporation. Their guitars are the best selling one in Indian market. Available at Rs. 13,000/- onwards (approx). For more details, visit Epiphone.com.
Directional mics, such as cardioids and figure-of-eights, exhibit different frequency responses off axis — broadly speaking, off-axis sounds tend to be duller, although it's a complex effect which is different for each model. Professional producers are well aware of this, and employ the effect to refine their sounds. For instance, Chuck Ainlay comments "I'll usually start with a [Shure SM57] on the amp; but not straight on axis with the middle of the speaker; it's usually off-centre, angled towards the middle of the speaker and generally just off the grille." Jay Graydon refers to a fairly similar setup: "I position the mic about one inch left of the edge of the speaker-cone centre, using a 22-degree angle, and about one inch back from the grille cloth." Andy Johns, on the other hand, has said that "the miking technique I used on electric guitars for years was two [Shure SM57s], one straight on, and one at 45 degrees. Put 'em together, and it always works."
More often than not, we always find it interesting to see and hear if there is any possible way an entry level electric guitar can outshine or even just come close with an expensive guitar model. These comparisons would mainly starts on looking at how they are built, time spent making them, where it is made and components used on the whole guitar. Having those as criteria in mind and as reality of it. So far it is given that it is going to be all in favor of the expensive models by a margin.
It features a handsome Grand Auditorium shape with a soft cutaway for good access to the higher frets, while the satin-finished sapele neck is incredibly playable – as is the case with all Taylor guitars. The iconic brand keeps costs low with laminated sapele back and sides paired with solid Sitka spruce on the top, as well as producing it in the respected Mexican facility.
San Francisco-based Senior Contributing Editor Joe Gore has recorded with Tom Waits, PJ Harvey, Tracy Chapman, Courtney Love, Marianne Faithfull, Les Claypool, Flea, DJ Shadow, John Cale, and many other artists. His music appears in many films and TV shows, plus an incriminating number of jingles. Joe has written several thousand articles about music and musicians and has contributed to many musical products, including Apple’s Logic and GarageBand programs. In his spare time Joe produces the Joe Gore line of guitar effects and edits a geeky guitar blog (tonefiend.com).
SG style guitars are synonymous with hard rock thanks to guitarists such as Angus Young of AC/DC and Tommy Iommi of Black Sabbath. As a result, most customers interested in SG guitar kits are looking to play hard rock and heavier styles of music in general. But limiting the SG to one specific style of music really doesn’t do justice to the versatility of the instrument.

About 30 years ago, a fellow co-worker began teaching me how to play electric guitar. I believe it was an Aria Pro Strat. He had been playing for 20 plus years at this time and was a very good teacher, he owned a 1958 Les Paul. I have not played since he was in a car wreck in 1990 as he could not return to work. He was however able to continue to play, its just our schedules never allowed the time to take lessons. He passed away in 2011, and since I retired last year, I’d like to take up lessons. I found your article very helpful in selecting an electric guitar. It mentions a lot of things most people do not consider when buying.
The advantage of this specific package is that you’ve got everything you need to get started right away: guitar (duh), amp, strings, tuner, guitar cable, picks, gig bag, strap, and instructional DVD. Those of you who just wanna get a guitar and start, this is your choice. Squier also makes similar package, but I recommend this over the Squier because the parts (electronics) are higher quality, although the Yamaha costs a little bit extra.
You may be questioning why we’ve not covered bass pickups in this article. However, to keep things simple, we decided to stick solely to guitar pickups. If you are looking for a new tone or more power for your beloved bass, check out our dedicated articles on Jazz Bass pickups and Precision Bass pickups for all you need to know, as well as recommendations.
On my guitar, the bridge plate is held on by five screws. Three on the back of the plate, two towards the neck on the front. You may need to remove the intonation block things.One or all. If you decide to take any off, use your calipers and measure from the front of them to the back of the bridge plate, so that you don't lose your intonation. Mark each saddle like in the picture.
Laminate guitars are not made with solid pieces of wood. Instead, a laminate guitar is made with layered pieces of wood, like a veneer, to create the body of the guitar. Despite its reputation among music snobs, laminate guitars can be top-selling, high-performing instruments. Just check out the Fender CD-60CE Acoustic Electric Guitar for proof of a beautiful, all-laminate, highly-popular instrument!

The Takamine GD71CE is a feature packed acoustic-electric guitar, with its solid top construction, visual embellishments and improved electronics. Takamine equipped this guitar with a solid spruce top and rosewood for the back and sides - a nice tonewood combination known for its articulate sound. It also comes with matching aesthetic appointments that include maple binding for the body, neck and headstock, abalone rosette, rosewood headcap, maple dot inlays, gold die-cast tuners with amber buttons, and the body is wrapped in a nice looking gloss finish. In addition to all this, the Takamine GD71CE is equipped with their TK-40D preamp system which gives you more control over your amplified sound with its mid contour switch, 3-band EQ with bypass and notch filter.
The way that cabinet manufacturers state the power handling capabilities of a speaker cabinet (or an individual speaker) can also be confusing. An important figure for a speaker cabinet's power handling capabilities is its rated wattage-handling capabilities as "RMS". For example, a bass speaker cabinet's back panel may state that it has a power handling capacity of 500 watts RMS. This means that the speaker can handle an average power, from a power amplifier, of 500 watts. The speaker can also handle occasional peaks or "transient" bursts of higher wattages, so long as these are brief. Where is becomes confusing is that some manufacturers also list "peak power", also called "maximum power", "max power" or "burst power". Peak power is the power-handling ability of the speaker for very short bursts of high-wattage signal. The RMS figure is much more important than the "peak power" or "max power" figure. To add to the confusion, some manufacturers state the "program power" capabilities of their speaker cabinet, which can be a vague and less defined term. Reputable, major manufacturers state the RMS output and/or power-handling capabilities of their gear.
If you are serious about studying guitar and taking your playing to the next level, you must possess not just a command of chords and scales but an understanding of improvisation and how to express depth and feeling. This certificate program, taught by Berklee’s world-renowned guitar faculty, enables you to develop your guitar technique and hone your skills in any style, from rock, jazz, and country to metal, blues, and beyond. Upon completion, you’ll be able to recreate parts played by your guitar heroes—but more importantly, you’ll be better able to realize your own unique sound.

In general, the typical situation is that HSH gives me options of cleaner/thinner/clearer tones which aren't as achievable with HH (even with volume and tone pots in use!). These are options I use very frequently, and I'd feel pretty restricted with HH! Though of course, this isn't the case for everyone. Indeed, I'm quite fascinated at the variety of tones Ron Thal and Andy Timmons get from the overly-simple SH set up they prefer!
Potentiometers are used in all types of electronic products so it is a good idea to look for potentiometers specifically designed to be used in electric guitars. If you do a lot of volume swells, you will want to make sure the rotational torque of the shaft feels good to you and most pots designed specifically for guitar will have taken this into account. When you start looking for guitar specific pots, you will also find specialty pots like push-pull pots, no-load pots and blend pots which are all great for getting creative and customizing your guitar once you understand how basic electric guitar circuits work.

Some guitarists find spectral overtone melodies inside sheets of feedback (see: Lou Reed’s Metal Machine Music, Sonic Youth), but British wunderkind James Blackshaw uncovers them in careful stacks of 12-string acoustic guitars and bright orchestrations. Minimal in his attack and classical in his drama, Blackshaw bears the acoustic guitar torch in the 21st century, his pieces unfolding in slow, formal shifts until they beam like a burning light through stained glass.
Music Go Round® is your ultimate used gear resource—we buy used musical instruments all day, every day. We understand the value of your instruments and make it easy for you to sell or trade. Bring your used music gear, such as guitars, drums, amps, bass guitars and pro-sound equipment —we’ll pay you $$$ on the spot—and you take home that must-have piece to your collection.
With the correct strings on the guitar, and the strings tensioned to the tuning you intend to use, place a capo at the first fret, or depress the low "E" string at the first fret. While doing this, depress the same string at the 12th fret. Site along the bottom of the string and note its relationship to the top of the frets up and down the fretboard between the fretted positions. The string in this situation, since it is under tension, is essentially a straight edge, and the curve, or profile, of the fretboard can now be seen. Generally, a gap of 1/64 - 1/32 " between the bottom of any string and the tops of the 6-7th frets (when fretting the string at the 1st and 12th frets or higher) is considered acceptable. You could go a hair flatter, or even a bit more curved depending on the needs of a given player, but start here.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: harmony","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
Most bass amps have only one rated wattage. A small number of amps, such as the Mesa/Boogie Strategy 88 amp head, have switchable wattage. A selector switch on the 88 enables the bassist to choose its full 465 watt power; half power (250 watts); or low power (125 watts). A bassist playing an arena on one night, then a club gig, and then recording in a studio could use full, half and low power for the different volume requirements. The Quilter 800 Bass Block has a "master control" knob which switches between various watt outputs for a similar approach.

| Tags: 1940's fidelity amplifier, 7F7, amp, amps, chickenhead knobs, EL86, fender clone, fender tweed champ, fidelity amp, fidelity amps, gibson skylark, gibson skylark amp, guitar amp, Guitar Amp History, guitar amps, practice amp, practice amps, silverface champ, silvertone, tone, tweed champ clone, valco, vintage amp, Vintage Amps, vintage guitar amp, vintage guitar amps

As to the “where,” positioning your mic an inch or less from the grillecloth and aiming it straight at the center of the speaker cone – pointing at the dust cap, in other words – yields a bright, punchy, detailed sound that suits many requirements, but can be too harsh. At the other extreme, aiming the mic at the edge of the cone, where the cone meets the suspension (the area just inside the speaker cutout in the cab’s mounting baffle) usually results in a looser, warmer, more raw and edgy tone. Between these two positions, there’s a wealth of voices to explore, and every inch of real estate that the mic covers between dust cap and cone edge will bring a noticeable sonic shift, without touching the amp’s controls. Also, aiming the mic straight at the speaker, in other words, mounted at 90 degrees to the flat plane of the front of the amp, and aiming it off axis, at a slight angle to the speaker, will illicit different sounds, too. With an assistant helping, or the guitarist playing if that’s not you, try moving the mic around the surface of the speaker while listening for the changes in tone through monitors or headphones, or if you don’t have enough isolation between live amp and monitors, record a little in each of several positions to listen back to. Pick the position you like for the track, and go with it.
PRS, for short, was started in 1985 as a true bootstrap brand and passion project of its namesake, Mr. Paul Reed Smith. Initially designing and building everything himself, Paul garnered his first following and retail purchases by selling guitars out of the back of his car. Over time, the business grew into what it is today: one of the world’s premier guitar manufacturing brands. Now headquartered in Stevensville, Maryland, PRS is a brand that is still as dedicated to their craft as they ever were. And with musician’s like Carlos Santana, Dave Navarro, Daryl Hall of Hall and Oats, and Orianthi Panagaris (the female guitarist from Michael Jackson’s final tour) backing them, it’s hard to make an argument against the brand or their instruments.
The rotary speaker effect is based on an actual rotating speaker system invented by Donald Leslie called the Leslie speaker. It was often paired with a Hammond organ, but in the 60’s guitar players also began using it for the unique tone and effect it gave the guitar. The original Leslie speaker cabinet used a two speaker system with a rotating horn and bass woofer drum. This created a cool, swirling effect where the music seemed to move around the room. Obviously, guitar pedals can only simulate this rotatary effect, which can be enhanced with a stereo amp setup. Of course you could use an actual Leslie speaker (or one of the newer competitors), but costs are high and it requires lugging around an extra speaker cabinet.
{ "thumbImageID": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco/L26865000001000", "defaultDisplayName": "Ernie Ball Music Man StingRay5 Special H Rosewood Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "HD Yellow", "sku": "sku:site51500000222156", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-HD-Yellow-1500000222156.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-HD-Yellow/L26865000005000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-HD-Yellow/L26865000005000-00-60x60.jpg", "imgAlt": "" } , { "name": "Vintage Tobacco", "sku": "sku:site51500000221730", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco-1500000221730.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco/L26865000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco/L26865000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Classic Natural", "sku": "sku:site51500000221728", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Classic-Natural-1500000221728.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Classic-Natural/L26865000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Classic-Natural/L26865000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Ivory White", "sku": "sku:site51500000221731", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Ivory-White-1500000221731.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Ivory-White/L26865000004000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Ivory-White/L26865000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Chopper Blue", "sku": "sku:site51500000221729", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Chopper-Blue-1500000221729.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Chopper-Blue/L26865000003000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Chopper-Blue/L26865000003000-00-60x60.jpg", "imgAlt": "" } ] }

As we mentioned before, the first mass-produced solid body electric guitar was introduced in the early ‘50s as a way for guitar players to avoid getting that unwanted feedback that amplified hollow body electric guitars were infamous for. Today, there are countless solid body guitars to accommodate any type of player and price range—from beginner guitar players to seasoned pros playing genres spanning hard rock, country, blues, heavy metal, jazz, and more! Some of the most popular solid body electric guitars include the Fender Telecaster, the Fender Stratocaster, the Gibson Les Paul, the Gibson SG, the Ibanez RG, and the ESP Eclipse.