Build Your Own Effect Pedal. Mammoth Electronics makes an effort to offer our customers a very neatly packaged and personally customizable effect pedal kit. Each guitar pedal kit comes equipped with everything you need to build your own effect pedal as quickly and inexpensively as possible without sacrificing quality. These DIY guitar pedals kits are designed to make building your own effect pedal easy for everyone from the hobby builder to the manufacturer. All parts are labeled and packaged in the kit for easy identification. Enclosures are fully customizable to the user specification and specially wrapped in a protective foam for safe transit. We’ve provided a wide selection for any effect pedal kit needs you might have. From a simple boost pedals, and fuzz pedals, as well as overdrive, distortion, and compression kits. We also have a wide range of modulation kits, including delay, reverb, tremolo, and phaser effect pedal kits. If you need a quick fix or a more complex guitar pedal kit, Mammoth Electronics offers a variety of options making it effortless to build your own effect pedal with a sound quality that will make an impression. We work hard to build relationships with only the best brands for our customers. These strong relationships allow us to provide extremely competitive pricing on all of our DIY guitar pedals kits.. We’re confident you will save yourself money & time if you build your own effect pedal with Mammoth Electronics. Mammoth Electronics offers customized DIY guitar kits and effect pedal kits that allow you to experiment with, create and amplify your own taste of music, without compromising on the sound quality. With added protective layering, these kits are safe for transportation and transit. We’re passionate about helping our customers build the best effect pedal possible so please Check out our Facebook page where you can provide feedback, share tips or ask any questions you might have about your latest projects.
This affordable signature model for Iron Maiden guitarist Adrian Smith is an exemplary classic metal guitar for the money. It features a Jackson slim D profile neck with immaculately finished frets, while the oiled maple neck a joy to motor around on. Allied to the surprisingly good build quality, this imparts a premium feel to the SDX. Tonally, the body might not quite enjoy the snap and sparkle of Smith's alder-bodied American original, but basswood is a great tonewood anyway, particularly once you're piling on the gain. The bridge humbucker is plenty powerful, with just enough detail to prevent it sliding into the woolly morass suffered by many lower-end units, and the single coils give you more than a sniff of Strat flavour, making the SDX a versatile guitar indeed considering its heavy metal association. The Floyd Rose Special bridge also does a solid job of keeping you in tune, no matter how crazy you get. A versatile guitar capable of covering many bases, and perfect for nailing your favourite Maiden tunes? What more could you need, bar the white high tops and tight strides?
We specialise in 1960s and 1970s parts and literature, relating to American and European guitars and basses. Specifically Gibson, Guild and Vox. The parts for sale on this site are sorted by brand and type, or you can search for keywords in the box above. We have a lot of parts unlisted on this site - if you do not see the part you need, please ask.
In May 1965 Keith Richards used a Gibson Maestro FZ-1 Fuzz-Tone to record "(I Can't Get No) Satisfaction".[24] The song's success greatly boosted sales of the device, and all available stock sold out by the end of 1965.[25] Other early fuzzboxes include the Mosrite FuzzRITE and Arbiter Group Fuzz Face used by Jimi Hendrix,[26] the Electro-Harmonix Big Muff Pi used by Hendrix and Carlos Santana,[27] and the Vox Tone Bender used by Paul McCartney to play fuzz bass on "Think for Yourself" and other Beatles recordings.[28]
The strings movement moves the magnetic field creating current in the coil of the pickup. The string does not create the current the movement does. If you placed a solenoid beneath the pickup and moved the pickup you would also create a current in the coil. If you took the strings off the guitar, and held a hammer head over the pickup and activated the solenoid you would get a current in the coil.
This tonewood isn’t a very common wood used. But, when it is used on a solid-body guitar, you’re definitely going to have access to deeper, richer, and woodier tones. However, pair it with a Cedar top and you can have bright and warm overtones. Paired with a Spruce top, you can play to get an aggressive bite on the trebles with a definite presence on the low end.

If ever there were a forensic investigation to identify the true biological father of punk rock guitar, all DNA evidence would point clearly to Johnny Ramone. The guitar style that people most associate with punk—briskly downpicked barre chords executed with blinding precision at breakneck tempos and marshaled in service of concise catchy song structures—is the invention, progeny and proud legacy of the man born John Cummings on Long Island, New York.
Crafted with quality body woods, it features a solid cedar top with a wild cherry back and produces a dynamic sound with a good mid-range that projects wonderfully. Sitting at the top is a distinctive, tapered headstock, which allows for greater tuning stability, while the hand-finished silver leaf maple neck – with rosewood fretboard – is slightly fatter than other acoustics, and is great for fingerstyle guitarists.
Last but not least, we feel like it is important that we talk about a unit’s tonewood. As expected, it has been proven that the kind of wood that is used in the construction of one model can actively influence how that particular unit sounds. To put it shortly, the wood is the material that can help you define just how the model that you like sounds before testing it.
While Gretsch is known for semi-hollow and full hollow body guitars, and it is only fitting that one of their semi-hollow chambered body models make this list, specifically the Gretsch Electromatic Pro Jet Bigsby. Being part of their Electromatic line, brings with it all the Gretsch goodness minus the premium appointments, at a very accessible price point. It is a true archtop thinline guitar, that passed the same attention to quality and detail that more expensive Gretsch guitars also go through.
While he could put out an album of his farts or slap his name on any shitty guitar and still make millions, he is a painstaking perfectionist who spent years agonizing over every minute detail of his EVH Wolfgang guitar and EVH 5150 III amp before offering it to the public and who has refused to release a new Van Halen album until he feels it’s ready.
The construction allows the soundwaves to resonate freely within the body’s hollow airspace as well as around the violin-style F-holes and throughout the solid glue joints. Everything – from the body wood and construction to the neck wood and pitch – contributes to the tone of the 2019 Gibson ES-335 Figured guitar. This model boasts impressive depth and sustain in addition to an exceptional resonance that you can feel through the guitar’s body.

While known primarily for their acoustic and acoustic-electric guitars, Takamine produced a limited run of very high quality solid body electric guitars in the early 1980’s.[1] These are the GX100 (Gibson Explorer body style), GX200 (proprietary type body style similar to a Stratocaster, stop tailpiece bridge), GX200-T or TB, (same as GX200 only with a tremolo bridge) GZ300 (proprietary design) and GZ340 (proprietary design). The GX200 and GZ340 contain factory DiMarzio made pickups.[2]
{ "thumbImageID": "FG830-Dreadnought-Acoustic-Guitar-Tobacco-Sunburst/J33498000003000", "defaultDisplayName": "Yamaha FG830 Dreadnought Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Autumn Burst", "sku": "sku:site51500000007792", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "495.00", "priceVisibility": "1", "skuUrl": "/Yamaha/FG830-Dreadnought-Acoustic-Guitar-Autumn-Burst-1500000007792.gc", "skuImageId": "FG830-Dreadnought-Acoustic-Guitar-Autumn-Burst/J33498000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FG830-Dreadnought-Acoustic-Guitar-Autumn-Burst/J33498000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tobacco Sunburst", "sku": "sku:site51500000007791", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "495.00", "priceVisibility": "1", "skuUrl": "/Yamaha/FG830-Dreadnought-Acoustic-Guitar-Tobacco-Sunburst-1500000007791.gc", "skuImageId": "FG830-Dreadnought-Acoustic-Guitar-Tobacco-Sunburst/J33498000003000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FG830-Dreadnought-Acoustic-Guitar-Tobacco-Sunburst/J33498000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000007788", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "495.00", "priceVisibility": "1", "skuUrl": "/Yamaha/FG830-Dreadnought-Acoustic-Guitar-Natural-1500000007788.gc", "skuImageId": "FG830-Dreadnought-Acoustic-Guitar-Natural/J33498000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FG830-Dreadnought-Acoustic-Guitar-Natural/J33498000001000-00-60x60.jpg", "imgAlt": "" } ] }
Just as it’s important that the guitar, amp and effects are performing to spec, make sure that all cables are functioning properly (it’s uncanny how many times a lead that was working fine yesterday suddenly develops a fault just before a take). It’s a good idea to ensure that spares are available. That goes for strings, too – valuable recording time can be lost just because a string has broken and no one has a spare. Some engineers will try to insist you use brand new strings when recording, but don’t be bullied into it if you prefer the warmer sound of a played-in set; that applies especially to bass, as new bass strings can introduce undesirable harmonic content into the sound.
This Schecter is an entry-level guitar into those kinds of tones that are an alternative to the standard Fender and Gibson sounds. Also, the arch top offers another kind of “feel” for playing that gives you slightly more accessible right-hand technique (it’s subtle, but it’s there), plus the body shape tucks the switches and controls out of the way.
I'll second the neck comment, conditionally. My first guitar was a hand-me-down Monterey archtop acoustic that had been my uncle's, and it have a sharp V neck. Out of nostalgia I bought another Monterey on eBay and its cross section feels like a tomato can lying in my hand. After a refret it plays smoother and easier than anything that fat has a right to. The original frets..., not quite.
MXR’s Distortion+ preceded the Tube Screamer and is an even simpler design, and, despite its name, is more an overdrive than a distortion. That said, its sound is considered by many to be a little more opaque, or colored, than the Tube Screamer’s. The box uses a 741-type IC and a pair of germanium diodes to achieve its soft-clipping sound. These are different components than the famed germanium transistors, but are made of the same material. Germanium is generally attributed a “softness” of tone, and the same applies to the diodes used in the Distortion+ (and other units); change them for silicon diodes and you’ve got a hard-clipping distortion pedal.
If you’re a beginner you might not feel like you know enough to be able to test play different guitars, but play whatever you know and see if you notice any difference. If you only know a few chords, or even “Smoke on the Water”, then play that, it’s better than nothing! Don’t care about the staff hearing you play, they’re used to it and are probably just happy to have a potential customer.

A while back I bought a GuitarPort, a product from Line6 that was one of the earliest guitar-to-PC interfaces. It cost me $99. It connects through USB and I could plug the guitar into it. I could play amp models and effects through my PC and the sound would come out of the computer speakers. (Headphones are of course an option through the PC speakers)
Think Eddie Van Halen in Eruption. Phaser effects create a swirling tone by splitting the signal and then moving each part in and out of phase with each other. Like chorus, it can sound dated, but it is great for adding a little bit of craziness to any riff or solo. Some pedals such as the famous MXR Phase 90 only have one control for the speed of the effect, while more modern designs also have controls for the depth and level of the phasing.
The 700-series guitars had removeable (loseable) bridge covers. Many of them for sale now are missing those covers and the vibrato arm. There are fewer 800s missing those vibrato arms. If I ever get a 700-series missing the cover and bar, I'll take a look under the bridge and see if any wood was removed. Maybe I can replace the bridge and tailpiece.
Be careful. Don't be rash. With the quality of Gibson's 2016 guitars, you should never have too many problems but... if in doubt with an older guitar, take it to a guitar repair pro. You won't need to do it often at all. And it's best to book-in your guitar with an explanation of what you think is wrong. Basic premise: T.L.C. for your guitar, and you'll feel the love back. Oh, and keep your guitar clean!
Who created the first distorted electric guitar sound in history? I’ll tell you: the first adventurous player to plug a hollowbody guitar into a tube amplifier way back in the 1930s, that’s who. We might have forgotten his name, or maybe there was no one there to witness the event, but you can bet he lifted up that guitar, checked out his new amp, saw that the loudness control went to 10, and cranked it up to hear just what it could do.
But there were already hints of the change to come, of the evolutions in music technology that would eventually compete with the guitar. In 1979, Tascam’s Portastudio 144 arrived on the market, allowing anybody with a microphone and a patch cord to record with multiple tracks. (Bruce Springsteen used a Portastudio for 1982’s “Nebraska.”) In 1981, Oberheim introduced the DMX drum machine, revolutionizing hip-hop.
Having tried out this technique, I have to say that it's something of a revelation to hear the enormous range of radically different sounds it makes available. When you start inverting the phase of a mic, it sounds like the most extreme EQ you've ever heard, which means that you can substantially reinvent guitar sounds at mixdown without using any heavy processing. For even more sonic mileage, you can also take a leaf out of John Leckie's book and process each of the three mic signals independently.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[mf] shop: amplifiers and effects: effects: multi effects pedals","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: amplifiers and effects: effects","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[mf] shop: amplifiers and effects","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"multi effects pedals","prop5":"[mf] shop: amplifiers and effects: effects: multi effects pedals","prop6":"[mf] shop: amplifiers and effects: effects: multi effects pedals","prop3":"[mf] shop: amplifiers and effects: effects: multi effects pedals","prop4":"[mf] shop: amplifiers and effects: effects: multi effects pedals","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category2"}
I couldn’t find a professional review of the Les Paul Express. The last time we checked, it had earned an average of just 3.8 stars out of 5 in 17 user reviews on Amazon, but most of the complaints I found on Amazon and elsewhere were from people who got samples that weren’t set up well at the factory. This wasn’t true of our sample, but it was true of the other Epiphone sample we received—and it was true of many of the cheap Epiphones I played in stores.
Beginning in 1960 with the T-60 solidbody, Teisco began to use the elongated “Strat” six-in-line headstock. This lasted through 1963. In 1963, the squarish Strat headstock appeared with the GB-1 solidbody bass. This seems to have lasted through 1965, but only on selected models, and with several subtle variations, including a slightly more rounded version. In 1964, probably later in the season, most of the Teisco solidbody line acquired a new hooked Strat-style headstock with four-and-two tuners on the guitars and three-and-one on the basses. This had the little hook at the throat like a Strat, and a larger hook on the tip, almost like a Woody Woodpecker plume.
That’s why it’s incredibly important that once you work through your first method book you should start seriously considering finding a teacher to further your education. A teacher can help give you the tools that you’ll need to continually advance on your instrument, which in turn will ensure that it will be a lifelong source of entertainment and enrichment.

The body is very much the same, composed of a chambered basswood topped by an elegantly contoured laminate maple top - complete with the easily identifiable Gretsch style pickguard. The neck specifications also follow the Pro Jet Bigsby, with a shorter than usual 24.6" scale maple neck, 12" radius rosewood fingerboard, and 1.6875" nut width. It has a total of 22 medium jumbo frets with Neo Classic thumbnail inlays serving as fret markers. Because its not a Filter'tron pickup, the sound of this guitar will be subtly different, but apparently good enough for the many users that have rated this guitar highly and even recommend it.

The Hi Flyer guitar and bass would be offered pretty much until the end, in ’77. At some point after, probably around ’73 or ’74, the plastic logo was changed to an outline decal logo. Also, at some point the pickups were changed to the distinctive twin-coil humbuckers with metal sides and a see-through pink insert on top. These changes most certainly occurred by the ’76 catalog, when the Hi Flyers were available in four finishes – sunburst (U1815, U1815B), white (U1816, U1816B), black (U1817, U1817B) and a cool natural with maple fingerboard and black dots (U1818, U1818B).


The problem that had led to Martin and the idea of making guitars in the first place also led Kaman to the idea of using synthetic materials in guitars. He realized he could use a composite fiberglass to “improve” two aspects of guitar construction. He could solve the problem of cracking due to wood shrinkage caused by changes in heat and humidity, and he could improve vibration transmission from the back because fiberglass actually resonates at frequencies similar to many woods, but is more efficient (wood actually absorbs some of the instrument’s vibrations).
• Why size matters: Fret width and height affect playability considerably. Fret wire measures at .078 to .110 at the crown, or top, and runs between .035 and .055 high. Taller frets, at .45 and up, tend to make for easier string bending and produce clear notes without much pressure. The latter makes them ideal for high speed playing. The furthest point of that concept is the scalloped fretboard, employed most notably by Yngwie Malmsteen and John McLaughlin, who played a specially designed Gibson J-200 with scalloped frets and drone strings with the group Shakti.
Electric guitars are the easier to play as compared to acoustic guitars. But only because the chords are easy to play, that much force is not required to hold the chords as well as strum the chords. So it would better if you first practice the chords and the strumming on an acoustic guitar. The song Yellow by Coldplay, mentioned below, is considered as one of the best guitar tabs for beginners.
If all other Telecaster models fail, the Standard Tele is a safe pick. The two Tele pickups provide a warmer tone and add more “twang” to your sound than the other pickup configurations we’ve seen. I’ve had some Telecasters get strangely noisy, with even the more expensive American models needing help from a good noise suppressor. It’s not a universal Telecaster problem, but the Tele pickups (especially the neck variation) can be susceptible to excess noise.
Now that we covered the basic features, let’s talk about what really counts: the built-in effects, amp models, and usability. For better or for worse, people tend to compare multi-effects units with the experience and sound you get from owning a pedalboard full of individual pedals. Well, great news: the consensus is that the Zoom G3X feels a lot like using individual stompboxes; more so than any other multi-effects unit on the market. Zoom really nailed it when it comes to making an intuitive interface. If you look at the layout, you’ll notice 3 “stompbox-style” sections side by side, each with a little display and on/off footswitch. These are meant to feel like 3 guitar pedals next to each other. They’re technically 3 slots which can each hold an effect or an amp model. The Zoom has 6 slots total (you can scroll left and right to access them), and all 6 can be used at once. You’ve got LOTS of choices to shape your tone: 94 effects and 22 amp and cabinet models. Any type of effect you can dream up, the Zoom G3X has you covered. Tremolo, vibrato, compressors, filters, overdrives are all available, and many of the effects simulate popular pedals like the Tube Screamer, EHX Big Muff, Pro Co RAT, Boss DS-1, and the list goes on and on. Same goes for the amp modeling - you can emulate a Marshall, Fender, Orange, Vox, etc. and pair up different amp models with various cabinet models. You can make your effect chain in whatever order you want, which is great for the beginner who is figuring out pedal order for the first time, and the veteran who wants to experiment with unique pedal combos. From a user review:
The MESA Bigblock 750 has a built-in overdrive channel. The Mesa M2000 has a high gain switch which can be engaged with a footswitch. The Marshall MB450 head and combo bass amplifiers have a tube pre-amp on the "Classic" channel which can be overdriven. The Ashdown ABM 500 EVO III 575W Bass amp head has a built-in overdrive effect. Overdrive is also available on many Crate bass amplifiers. The Yamaha BBT500H has three types of built-in drive effects: overdrive, distortion and fuzz. The Ampeg B5R Bass Amplifier has two channels: clean and overdrive, with the ability to combine the two. Verellen, a boutique amp company, produces a bass amplifier with a built in overdrive channel.
I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.
For under £400 you get a set of Paul Gagon-Designed Alnico Pickups which provide a massive sound ranging from smooth and cool surf rock to all out grunge distortion. The AW4470B humbucker in the bridge position is complemented by an AP4285B P-90 neck pickup which ensures you have an array of tones at your fingertips – ideal for clean and distorted amplifiers. The addition of a push/pull coil tap allows you to split the humbucker so you can enjoy the classic sounds of a single coil. A mahogany body and maple neck provide the resonance, depth and snap you need for a wide range of tones and the G&L Saddle Lock Bridge with its six individual saddles offer incredible intonation as the saddles actually lock onto the strings.
This company slowly merged into Hoshino/Tama but prior to their unification, produced instruments with the Star badge, mainly drums. They also produced guitars, including the infamous Zim-Gar badged electric and acoustic guitars. Over time, drum production was segmented to Pearl, while guitar contracts were taken up by Tama. Zim-Gar production was relatively short, as these were budget guitars made for K-mart between 1962 and 1968.

In 1960, Gibson experienced a decline in electric guitar sales due to their high prices and strong competition from Fender’s comparable but much lighter double-cutaway design, the Stratocaster. In response, Gibson modified the Les Paul line. This 1961 issue Les Paul guitar was thinner and much lighter than the earlier models, with two sharply pointed cutaways and a vibrato system. However, the redesign was done without Les Paul’s knowledge. Although pleased with the sound, he asked Gibson to remove his name from the instrument until they fixed a design issue with the neck.[18] This separation occurred in 1960, but Gibson had a surplus stock of “Les Paul” logos and truss rod covers, and so continued to use the Les Paul name until 1963. At that point, the SG guitar’s name was finally changed to “SG“, which stood simply for Solid Guitar. In addition to the SG line, Gibson continued to issue the less expensive Jrs and Specials (and the Melody Makers) with the newer body style. These, together with the Firebird, were the standard Gibson solid-body models until the reintroduction of the Les Paul Standard Goldtop and the Les Paul Custom guitars to the market in 1968.
Here we have is one of the finest vintage Banjo's you will ever see. This example is a 32 year old High End no expense was spared. Its super well built with top grade materials like Brazilian Rosewood fingerboard and Mother of pearl inlay work just about everywhere WoW!... just have a good look at its AAA flamed Maple back and its AAA flamed Maple Neck.. this one is super nice and well its clean. The action is great and she has a very good feel & sound. More to come soon...stay posted for updates Thanks for looking. .
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: vox","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Modulating Offset: The output of solid-state amplifiers is directly connected to 2 DC power supplies through the output transistors. The instantaneous non-symmetry within the music waveform (particularly from the bass notes) is averaged as a modulating DC offset. This modulating offset is small, but it varies the efficiency of the speaker, introducing inter-modulation distortion, amplitude modulating the music. This problem is mostly eliminated by the trend to use an active sub-bass. In valve amplifiers the output transformer isolates the speaker from the amplifier electronics. No modulating offset can be produced.
You've Changed.  Yep, you still LOVE your guitar, but man, you are now playing through a sweeet pedal board and amp that has way more gain than you could ever use.  The days of plugging straight into a Twin Reverb and trying to bully her into distortion is (thankfully) long gone.  Plus, you're older and wiser now, you no longer judge a pickup's value simply in it's output level ... you have now acquired a taste for true tone.  You want rich complex harmonics and touch sensitivity.  Face it, those EMG's did what needed to be done in 1991, but it's time to move on! 
A strong guide for those learning their way around an acoustic guitar, this book will teach you to play popular songs like “Angie,” “Barely Breathing,” “Behind Blue Eyes,” “Building a Mystery,” “Change the World,” “Dust in the Wind,” “Fast Car,” “Here Comes the Sun,” “Jack and Diane,” “Landslide,” “Leaving on a Jet Plane,” “Maggie May,” “More Than Words,” “Name,” “You've Got a Friend,” “Yesterday,” and others.
MusicPCB.com – offers PCB projects to build guitar and bass effects, and synth modules. All PCBs are professionally manufactured, and include soldermask, a silkscreened component legend, and plated through holes and pads. They are designed to be easy to build, provide simple and clean wiring, to work well with your other pedals, modules, and instruments, and most of all to sound great and provide sounds and features not available in commercial designs. Each PCB comes with a PDF document with wiring diagram, schematic, build notes, and large modding sections with details on how to perform a variety of mods to tailor the design to your needs/taste.
We specialise in 1960s and 1970s parts and literature, relating to American and European guitars and basses. Specifically Gibson, Guild and Vox. The parts for sale on this site are sorted by brand and type, or you can search for keywords in the box above. We have a lot of parts unlisted on this site - if you do not see the part you need, please ask.
I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?
The truth is that I've never known what it's like to not want to play music of my own because I come from an Irish family that all played instruments. Luckily for me, my parents were very young when I was born -- they were like sixteen, seventeen -- and they were from a tradition of people playing instruments, accordions, pennywhistles, guitars, harmonicas and things like that -- cheap little instruments. But because they were young and moved over to Manchester, they liked rock and roll and pop music of the day.
SPEAKER-LANEY-LA30Stock Code: 558568Guitar Amp Items Available: 1Stock ID: 558568Available at Cash Converters Pinetown only. Subject to availability.Please visit the store to view and purchase the product.Cellphone number 083 459 1248 (Whatsapp) Telephone number 031 701 9017 - speak to JennyBuy with confidence -This product is covered by the Cash Converters guarantee.Faulty goods returned within 6 ...
Originally this effect used 1/4″ tape going round a machine like the Echoplex. It then recorded whatever you were playing and played it back to you a set time later.Since its launch in the 1950’s tape based delay started to appear in more and more recordings. Its saturated sound and imperfect repeats gave it some stunning character that is still loved today.Now tape is dwindling so most people have moved on to emulated digital pedals. These get close to the sound of an original tape unit without any of the added maintenance.

First Act is a very peculiar guitar company. They have guitars that sell at Toys R Us that will literally fall apart in your hands. They sell pedals that are a complete joke, leaving you with the impression that they must be a bad, bad joke. Then something strange happened, I did a little research and found some info that was stunning. First Act has a couple of guitar lines that are some of the finest guitars I have ever seen, heard, or even read about. They have guitars that go for $3000 plus and are better guitars than any person commenting on this board will ever have the opportunity of even being in the same room with (including myself) Who would have thought?! Go figure.


When we take a look at a guitar neck, it is important that the guitar is under string tension and in playing condition when measured. The PLEK measures the instruments neck and fret height with the instrument strung up to pitch. The computer ascertained a 3-D like graph of the fret board surface, including the position and height of the strings. Thanks to the PLEK SCAN the relief of the neck made by the string tension is taken into account while calculating the process-parameters. The operator then has the ability to manipulate the parameters to give the player an optimal playing instrument.

Epiphone zenith guitar from the early 1960's,made from the 1931-1969,,16-3/8" body,oval pearl inlays,sunburst in color,single wide binding top & back.this guitar has a deep scratch on the top but not thru the wood,a couple extra holes in the top body on each side of the frettboard were it looked like an extra pickguard was,lots of finish crazing on the back of neck.this guitar has a new set of strings and plays and sounds great with nice action.
Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
This style of volume effect rhythmically reduces and swells the volume of the signal in a regular cyclic fashion.  Often heard in Country and Western type guitar tracks, tremolo was commonly built into older amplifiers and is one of the earliest recorded effects.  The speed and depth of the effect is controlled on the pedal by way of one or two potentiometers.  When set to the tempo of a song, the player can produce an extra layer of rhythm on top of what is being played.
Taylor Guitars was founded in 1974 by Bob Taylor and Kurt Listug, and has grown into the leading global builder of premium acoustic guitars. Renowned for blending modern, innovative manufacturing techniques with a master craftsman's attention to detail, Taylor acoustic guitars are widely considered among the best-sounding and easiest to play in the world. The company is a pioneer in the use of computer mills, lasers and other high-tech tools and proprietary machinery, and today, Bob Taylor is widely recognized throughout the musical instrument industry as the visionary acoustic guitar manufacturer.
accessories aeolian mode analog basic chords basic guitar chords beginner best guitar brands cheap guitars chord diagrams digital dorian mode easy guitar songs effects guitar guitar amp photos guitar buying guitar effects guitar equipment guitar kits introduction ionian mode lessons locrian mode lydian mode major key major scale mixolydian mode music studio natural minor scale noise control pedalboard pentatonic major pentatonic minor phrygian mode pickups practice room recording scale diagrams soundproofing theory used guitars

Description: Body: Mahogany - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Maple - Frets: 24 - Inlay: None - # of Strings: 6 - Scale Length: 27" (69cm) - Headstock: 7 In-Line, Reverse - Bridge: Floyd Rose Style Locking Tremolo - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, Grover Tuners - Circuit Type: Active - Pickups: EMG 707 - Pickup Configuration: H-H - String Instrument Finish: Tribal Purple, Black flame, Tribal Green, Blue Quilt, Satin Natural, Blue Flame

Since treble frequencies pass through a capacitor, what would happen if you routed the positive lead THROUGH the capacitor rather than having it ground out frequencies?  The answer: just the opposite - the signal from you pickups would pass through the capacitor and only treble frequencies would get through.  Aha!  A new type of tone control.  The illustration below shows this type of wiring in a bit of an advanced concept.


To be able to buy a name brand guitar like this at such a great price was a real steal. One of my sons is a beginner learning to play, so it was great for me being able to purchase a guitar like this that would carry him from beginner into an intermediate player in later years. It is a well-made and beautiful guitar, and it produces a wonderful sound that you would expect from a name like Fender. Plus, with my son being left-handed, I thought it would be difficult to find a good affordable left-handed guitar for him. Not only was able to find this high quality one, but the price couldn't be beat.
A third product which does not fit into the "combo"/"head"/cabinet categorization are powered speaker cabinets designed for use with bass instruments. While these powered speakers share many features with a regular combo amp, a bassist cannot plug her bass directly into a powered speaker cab. The powered speaker system is designed to operate as a "slave" to another amplifier's unpowered signal (or another combo amp which has a pre-amp out jack). Some powered speaker cabs only accept a "link" XLR cable from the main amp. Some powered speaker cabinets are designed as part of a company's line of bass amps; as such, the colour of the cabinet and its grille match the combo amp which will be placed on top of the powered speaker. As well, the powered speaker may have interlocking corners to ensure that the main amp stays put on top of the powered speaker.
Having spent years developing the JDX 48 and Headload, it only made sense that Radial would develop a solution for guitarists who didn’t want to use an amp at all; hence, the JDX Direct-Drive™ was born! The Direct-Drive lets guitarists choose between three different amp voicings: “Combo”, “Stack” and “JDX 4×12”, with further controls to adjust the brightness of the amp. The guitarist simply plugs in their guitar through their pedals, into the JDX Direct-Drive and out to the board with an XLR cable. There are additional outputs for attaching to onstage amps or speakers as well for guitarists who are more comfortable having volume with them on stage. The engineer can then mic the amp and mix the two signals together to get the best tone out of the PA system.

You're headed in the right direction - don't stop! yes, the keyboardist should control vibrato directly with the fingers, not automatically with an LFO. The more you rely on the technology to play the music for you, the worse your results will be in the long run. Is your intention to emulate a guitar, or to achieve a similar kind of lead expression and sound control during playing? Because these two are very different.


When creating your tone with effects, understanding the order in which you connect your effects is very important. Creating an effects chain is a lot like making a sundae. The Ice cream is the base of your sundae, followed by toppings and finally sprinkles. If you put the sprinkles and toppings in before the ice cream, the flavours will still be there and it may still be a delicious sundae but it is a lot harder to see what extras you added underneath all that ice cream.
After these is the overdrive/distortion, in this case our ST-2 Power Stack. The CS-3 Compression/Sustainer (and the PW-10 V-Wah) can improve the ST-2’s sustain and tone by increasing the signal to it, so they’re placed before the ST-2. Many players use a compressor just for this reason, and the “fixed wah” sound, which is a wah pedal turned on but not continuously swept, is very common in rock and metal lead tones.

A. Electric guitars either have bolt-on, set neck, or neck-through neck construction. Bolt on necks are simply bolted onto the body, set necks are set into the body and glued, and neck-through construction is where the neck extends all the way through the body. The latter is generally considered the best and most durable, but won't be found on cheaper guitars.
When it comes to buying an electric guitar there are a lot of options available, and choosing one can be confusing. This guide will help you understand the basic differences in electric guitars so you can make an informed decision. And remember, we’re here to help with friendly Gear Heads available at 1-800-449-9128 who can guide you to the electric guitar that best meets your needs.
Guitar amps for newbies aren’t going to sound as good as the professional rigs used by advanced guitarists, but surely you don’t expect that for under $100. However, they should still sound good. In fact, in my opinion a starter amp should be good enough that, once you’ve moved to a better main amplifier, you can still use your first amp for practice.
InstantDrummer provides tempo-sycronized drum loop sessions that can be accessed easily from within RiffWorks guitar recording software. Most RiffWorks InstantDrummer Sessions are loop recordings of professional drummers brought into the InstantDrummer format for easy manipulation by RiffWorks users. Play along with InstantDrummer sessions by famous drummers like Alan White (Yes, Lennon), Jason McGerr (Death Cab for Cutie), John Tempesta (Rob Zombie, Exodus, Testament, Tony Iommi, The Cult), Lonnie Wilson (Brooks and Dunn, Faith Hill, Tim McGraw), and Matt Sorum (Guns N Roses, Velvet Revolver). Use them in your recordings royalty free!
I have a Kona Signature Acoustic with beautiful inlays in the wood. I believe the body is mahogany, decent resonant tone, and once I shimmed up the saddle bridge (which technically should have been replaced all together due to notching), sounds better than my Martin in many ways, where it better distributes the low, high, and mid-range tones. The Martin is too bassy sounding, but have ordered new bone bridge saddle, which hope it improves the cheap plastic one it came with...
Dont buy too cheap. The cheaper the guitar, the harder to play and the less quality the sound. You want a rewarding feel and sound or you will get discouraged. Buy a better guitar used than a new one cheap. Are you going to learn chords or fingerpicking ? Some guitars are better sounding for one than the other. Some like Taylors are versatile and provide good sound for both. Be smart. Good luck.
Quality replacement pot from Bourns with DPDT pull switch for coil tap or other switched application.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  1 Meg Ohm, Special A2 taper preferred by guitar and bass players.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.   Both pot and switch terminals are solder lugs.   Not designed for PC board insertion.
By the early 1980s, the radical experiments of early 1970s-era fusion gave way to a more radio-friendly sounds of smooth jazz. Guitarist Pat Metheny mixed the sounds of blues, country, and “world” music, along with rock and jazz, playing both a flat-top acoustic guitar and an electric guitar with a softer, more mellow tone which was sweetened with a shimmering effect known as “chorusing". During the 1980s, a neo-traditional school of jazz sought to reconnect with the past. In keeping with such an aesthetic, young guitarists of this era sought a clean and round tone, and they often played traditional hollow-body arch-top guitars without electronic effects, frequently through vacuum tube amplifiers.
Just plug your guitar into the sound card input, start Guitar FX BOX and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice and other inputs. This sound processing program is acting just like a good collection of guitar effects pedals. You can use several of them at the same time, even all if you need so.
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones.
With a typical Strat single coil pickup and assuming an instrument cable capacitance of 500pF, 250K tone pot, 0.022uF cap, guitar plugged in to a 1Meg input, the range of the tone control is roughly from 6.0kHz -3dB (tone fully clockwise – with a resonant peak of +7.4dB at 3.9kHz) to 950Hz (tone fully anti-clockwise – with a resonant peak of +4.5dB at 594Hz). These figures vary from pickup to pickup and depending on the instrument cable capacitance.
{ "thumbImageID": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "defaultDisplayName": "Yamaha FX335C Dreadnought Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000000265", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst-1500000000265.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000000264", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black-1500000000264.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000000262", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural-1500000000262.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000-00-60x60.jpg", "imgAlt": "" } ] }
The series features three original Fender body shapes – Malibu™, Newporter™ and Redondo™ – in several colors at three price points: California Classic ($799.99), California Special ($699.99) and California Player ($399.99). These exclusive shapes boast refined geometry and unique bracing patterns designed for responsive, articulate tone. They are diverse body shapes that can give any guitarist a comfortable playing experience– from the small and narrow-waisted Malibu, ideal for recording, to the larger Redondo, suited for ensemble playing. Each model’s personality is also defined by 11 vibrant and slick Fender colors, including some popularized in the electric guitar world: Cosmic Turquoise, Arctic Gold, Aqua Splash, Matte Black (California Special models only), Hot Rod Red Metallic, Candy Apple Red, Champagne, Rustic Copper, Electric Jade, Belmont Blue and Jetty Black.
I got this one because my 18-year-old Takamine G-series has some serious fret wear, and a slightly warped neck, even with the truss rod maxed out, and will cost more to repair/refurbish than this one cost outright. Hence, the action is quite high, and it's hard to play bar chords higher than the 3rd fret, and there's some noticeable buzz and rattle unless I hold my mouth just right...
Launch price: $1,499 / £1,399 | Body: Ash | Neck: Maple | Scale: 25.5" | Fingerboard: Maple/rosewood | Frets: 22 | Pickups: 2x V-Mod Single-Coil Telecaster | Controls: Volume with treble-bleed, tone, 3-way selector switch | Hardware: 3-saddle, strings-through-body Tele bridge with compensated brass saddles, 6-screw mounting with removable modern 'Ashtray' bridge cover | Left-handed: Yes | Finish: Mystic Seafoam, 2-Color Sunburst, 3-Color Sunburst, Black, Butterscotch Blonde, Candy Apple Red, Crimson Red Transparent, Natural, Olympic White, Sonic Gray
I started by consulting with an old friend, Ken Korman, guitarist of the New Orleans band The O-Pines and a serious aficionado of guitars both expensive and cheap. He gave me some good ideas of what kinds of guitars had hit the market in the last few years and a few models we should consider considering. A walk through January’s National Association of Music Merchants (NAMM) show in Los Angeles gave me further insight.
Indeed, the Adamas was not the only technological exploration conducted by Ovation. In 1973, as the threat of copying loomed, Ovation decided to manufacture its own inexpensive “copies.” Launching a full-out research effort Ovation came up with new bowl materials, a new way to make tops, and a new neck construction based on more technology used on the helicopter side.

If all other Telecaster models fail, the Standard Tele is a safe pick. The two Tele pickups provide a warmer tone and add more “twang” to your sound than the other pickup configurations we’ve seen. I’ve had some Telecasters get strangely noisy, with even the more expensive American models needing help from a good noise suppressor. It’s not a universal Telecaster problem, but the Tele pickups (especially the neck variation) can be susceptible to excess noise.


DR Strings makes strings that were specifically designed for drop d tuning, other alternate tunings, and even standard tuning. Known as DDT strings, DR spent over two years perfecting them. DR created a new patent pending method for constructing these strings to ensure great performance with lower pitches. Because of the amazing construction, and their ability to quickly lock into tune so quickly, DR calls their DDT's "Superstrings". Why not try a set? DDT's are available for electric guitar or bass guitar.

If you want to measure the fret size on existing instruments, a good way to do it is to get an inexpensive dial caliper (think Harbor Freight etc).  You can measure the width with the outer jaws (make sure to zero out the calipers for accurate measurements), but for the height (unless you are going to notch the depth rod and subtract the difference), use a piece of something of a uniform thickness and drill a hole in it to accomodate the depth rod, place it across two frets and measure thru the hole (usually near the crown) to the fingerboard and subtract your piece's thickness.  When measuring fret height, it is always good to measure a few different places on the neck as the height may vary according to leveling and wear. On many guitars (but not all) the upper frets (if there is not a neck joint area hump that was accounting for during leveling) will be a good indicator of fret height.

Ash is a common body material in solid body guitars. It is harder than mahogany and very resonant. This gives the guitar ringing sustain and bright tone with a well-defined mid-range. A light colored wood with attractive grain figuring, it is often given a transparent finish. Swamp ash is a particularly appealing, detailed wood used on higher-end guitars.


Re-amping a DI'd keyboard or bass can really liven up a sound, but if you don't have access to a nice amp or amp modeller, you can simulate the effect by sending the audio to a bus with a delay plug-in set to a short delay time and with the wet signal set to 100 percent and dry to 0 percent. Then send the bus's output to another bus with a distortion (or better still, a guitar amplifier emulator) plug-in inserted. This simulates the delay you get from miking up a speaker, and if you blend this in with the DI'd sound, it can give the recording a live feel — especially if you use a convolution reverb to add some 'room' ambience. You may also want to roll off the very low and high frequencies to help get rid of that DI'd vibe. Nicholas Rowland
A neat recording solution for when you want the sound of a speaker running flat out, but without being thrown out of your flat by your neighbours!A practical method endorsed by those engineers who don't like to leave their comfortable chairs too often is to combine the above techniques by using two close mics, one on-axis and one off-axis, plus one distant mic a few feet from the cabinet. If the close mics have very different characteristics, for example a capacitor mic on-axis and a dynamic mic off-axis, you'll get an even greater choice of tonality, as you can vary the mic balance being recorded. Switching the phase of individual mics can often yield interesting combinations and, if you really don't want to leave that chair, you can also delay the ambience to increase its effective distance when it is combined with the other mics. Each millisecond of delay is roughly equivalent to 12 inches of added distance.
If you were a fan of almost any kind of contemporary popular music when you were growing up, there was probably a time when you thought that it might be cool to learn how to play guitar. Whether you admired the road-going, globetrotting, fly by night lifestyle of rock stars or you just thought it might be a good way to pick up chicks, there’s something viscerally desirable about garnering even a modicum of instrumental mastery. And that very well might have something to do with the allure of the instrument itself.
hi-can you put two caps on your two tone pots or will just the one do as is mormal-aslo on a push pull pot do you need two tone caps one for the bottom half as regular-if putting on the square part  of the push pull pot -can you put on any of the six lugs ie the ones not used -i have instaleed a push pull swich but when down the tone on the neck pickup does not seem to have any effect -when i pull it when usingn the pull pull it does have a effect is this normal-i have now neck-bridge-and all three in a row-when not pulled which would be normal five wat switch sound i seem to get a telecasster sound ,i thought this was the case when i pull it up=i have now a nice selection of sounds—thankls sean

Guitar amps for newbies aren’t going to sound as good as the professional rigs used by advanced guitarists, but surely you don’t expect that for under $100. However, they should still sound good. In fact, in my opinion a starter amp should be good enough that, once you’ve moved to a better main amplifier, you can still use your first amp for practice.
What makes the THR100HD special is its clever digital power amp, which faithfully mimics the operation of real valves. Then there's the fact that you get two of everything: two preamps, both with a built-in booster function that behaves as a stompbox; two effects loops; two power amps; two XLR line outs. What you see is very much what you get, with a five-position amp voice selector, which packs three overdrives - crunch, lead and modern - and two cleans: solid, and er, clean. There's also a channel volume control, because the master volume control works inside Yamaha's Virtual Circuit Modelling environment, adding more drive to the THR's digital power amp simulation, which in turn has five different valve choices, as well as Class A or Class A/B operation. Lurking on the rear panel are two speaker-simulated balanced XLR line-outs, with a ground lift switch that uses the latest Impulse Response cabinet simulation. There are superb Fender-influenced cleans, bluesy touch-sensitive crunches and a choice of classic or modern lead tones, all footswitchable for your convenience. The tones are so convincing it's really hard to believe there are no valves. The interaction of the clever digital power stage with the loudspeaker is just like that of a good valve amp, and the virtual valve choices are uncannily authentic.
Were its fate left to the Electric Storms, Ovation may never have made it out of the ’60s. However, the breakthrough occurred when the company picked up the endorsement of pop star Glen Campbell, who began his career as a session guitarist and folk singer, at one point touring behind Ricky Nelson. In ’65 he was a member of the Beach Boys, but by the late ’60s he had broken through to be an enormously popular balladeer with country-tinged hits like “By the Time I Get to Phoenix” and “Wichita Lineman.”
Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.
CostHelper Electric Guitar Guide - [New Window] - Find out how much an electric guitar should cost. Get price guidelines and shopping tips for an electric guitar. A basic electric guitar with amplifier and cord starts around $200 to $400 for a beginner's outfit; a better quality kit can run $500 to $2,000, and high-end electric guitars are $2,000 to $5,000 or more for the instrument alone.
This page contains information, pictures, videos, user generated reviews, automatically generated review and videos about Washburn XM DLX2 but we do not warrant the quality, accuracy or completeness of any information on our web site. If you have more information about Washburn XM DLX2 please write a review. Some reviews are automatically generated generated by using verbal representation of publicly available numeric rating information musicians entered while writing review of Washburn XM DLX2. User generated reviews of Washburn XM DLX2 represent opinions of credited authors alone, and do not represent Chorder's opinion.
While Taylor Guitars is most famous for our acoustic guitars, we are also proud of our line of unique electric guitars. We have the T5, our original hollowbody hybrid that bridges both worlds like no other guitar. Check out our T5z, the smaller hybrid with a compact body that electric players will love. And be sure to try the T3, our inspired take on the semi-hollowbody guitar with a sound that comes alive with amazing pickup flavors, plus coil-splitting and tone-shaping versatility.
Another way of categorizing bass equipment manufacturers is by which part of the market they are targeting. While Peavey and Yorkville products are aimed at the generalist mass market, some bass equipment manufacturers, such as Acoustic Image or Walter Woods make expensive "boutique" equipment that is aimed at a niche market within the professional musician market. Acoustic Image amplifiers and speaker cabinets tend to be used by professional acoustic folk and jazz musicians, and Walter Woods amplifiers are associated with professional acoustic jazz bass players.
Get a Luthier (or do it yourself if you have the knowledge) to change the tuners to the ones I specified, take the sharp edges off the neck, throw some extra light strings on, and do a set up and this guitar becomes a dream guitar for kids or adults for a lifetime. So while the Yamaha APXT2 may not be the best guitar for your purpose, in this price range you WILL NOT find the perfect guitar, period. At least Yamaha gave us a foundation off which to build (which you can't say for other brands) and with a little modification here and there, you will have the perfect little guitar. I bought this for my child and I find myself picking it up and playing it more than my more expensive full size guitars. It's just a pleasure having it around the house, but not so much so before I modified it. There's nothing worse than having a guitar that's just about not a toy as compared to a professional guitar. You want to make your guitar easy to tune and enjoyable to play so spend the extra bucks to make it perfect and you will have no regrets.
Even with such a lightweight configuration, the Fishman F1 system is still more than capable of rendering the tone of the DCPA4R with a great deal of accuracy due to the superior tight focus on the preamp. This guitar is our pick for the top acoustic electric guitar if price is no object. There are many other awesome models out there and we urge you to check them out as well, but you'll likely find that your search could have ended right here.
{ "name": "Vintage Sunburst", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000004000", "status": "backorderable", "statusText": "Back Order", "pimStatus": "R1", "inventoryText": "Reserve now - Ships 11-05-2018", "inventoryKey": "available_date", "availableDate": "11-05-2018", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000004000", "displaySku": "J40301 000004000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000004000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-12-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Vintage-Sunburst/J40301000004000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Vintage Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }
ESP is yet another Japanese musical instrument brand. The brand has many artist endorsements and a ton of user recommendations. ESP was founded in 1975, and it started as a builder of custom made parts. Guitarists would use ESP parts to personalize their existing instruments. Now ESP is known for their creative versions of popular guitar shapes. The guitars are known for their fast play features and great sound. Their guitars are known for their unique and unconventional designs. For that reason, ESP guitars are most popular among modern rock and metal players.
"I have purchased 15 personalized guitars from the top guitar custom shop. All the guitars have met or exceeded my expectations. Great workmanship and quality work. An exceptional group of people to work with. They are ready to answer your questions or concerns. The one time i had a concern about a guitar they responded immediately and handled the situation more than i expected. I highly recommend this company!" Dr E C Fulcher Jr - Abingdon, Maryland USA.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
Taylor 214ce A ‘best acoustic guitar’ list would be incomplete without a Taylor in it. This Grand Auditorium guitar with a cutaway from Taylor projects plenty of volume and has a bright and defined tone that many fingerstyle players love. If you’ve always wanted a Taylor, this one with a solid top will surely stick with you for many years to come.
The neck and fretboard (2.1) extend from the body. At the neck joint (2.4), the neck is either glued or bolted to the body. The body (3) is typically made of wood with a hard, polymerized finish. Strings vibrating in the magnetic field of the pickups (3.1, 3.2) produce an electric current in the pickup winding that passes through the tone and volume controls (3.8) to the output jack. Some guitars have piezo pickups, in addition to or instead of magnetic pickups.
×