Although a lot of engineers prefer to mic up the single, best-sounding speaker cone of a multi-speaker cab, some blend the sounds of more than one. Steve Churchyard: "If I'm using a 4x12 cabinet, I find two of the best-sounding speakers, and I'll put an SM57 right on axis and right on the cone of both those guys. Then I'll mix them in the control room, combine the two together. It seems a little different than just using one mic. It's not twice as good, but it's just mixing the character of two different speakers."
Guitar players who haven't done much recording tend to comment that the sound coming back over the studio monitors isn't the same as what they hear when standing in front of their amp at a gig. This is hardly surprising, since studios seldom monitor at that kind of level, so the question they should be asking is whether the sound you hear over the monitors is comparable with the guitar sounds heard on similar records.
While Ujam has only been in business since 2010, their members aren’t new to VSTs or even guitar VSTs for that matter. In 2002, Steinberg released Virtual Guitarist, developed by Wizoo, and this was one of the first VSTs that brought credibility to guitar VIs. It just so happens that the man that founded Wizoo, Peter Gorgers, founded Ujam and brought along many of the members, ensuring the same level of detail.
This multi effects pedals brings all that shine of the studio in a single compact device. Now you have state of the art processors like flanger (click here for flange pedals), chorus, a phaser pedal, delay, a vocal effects processing device, and tremolo and pitch shifter in your bare hands. Apart from such features, you also get a mind-blowing back up of 24-bit/40 kHz resolution that turns your jamming into a soulful experience.
Also in 1952, Kay introduced the matching K-162 "Electronic" Bass, which was the first commercially available thinline-hollowbody electric bass guitar, and the second production electric bass guitar after the Fender Precision Bass debuted in 1951. Due to the use of K-162 by a bassist of Howlin' Wolf, Andrew "Blueblood" McMahon, it is commonly known as the "Howlin Wolf" bass. These instruments[clarification needed] are believed to be the first semi-hollow electrics[citation needed] (i.e., thinline-hollowbody electric with solid center-block), predating the Gibson ES-335 by six years. Their unique design[clarification needed] featured a flat top with no f-holes, a free-floating arched back, and two braces running along the top. The result was a semi-acoustic instrument that was feedback-resistant while retaining natural acoustic resonances. In 1954, Kay added the K-160 bass to its catalog with baritone tuning, according to the catalog,[citation needed] "tuned like the first four guitar strings but one octave lower." Structurally this bass was basically same as K-162 bass, except for the higher pitched tuning and the addition of a white pickguard.
Billy Corgan chose the handcrafted LJ16 A.R.E. as the foundation for his signature model. A few sonic changes were made during design at Mr. Corgan’s request -- a slight emphasis on the upper-mid harmonic frequencies creating a better listening experience for the audience and a bit more detailing in the low-mid range to help round out the balance to complement his playing style. Other personalized Billy touches are brass bridge pins, TUSQ nut and saddle, GOTOH open-gear tuners and a unique “Zero” head stock logo.
what about Ernest Isley – he is easily in the top 3 of all times – no one can match this guy's riffs in songs like summer breese – who';s that lady – who loves better – hope you feel better – voyage to atlantis, and liquid love just to name a few of many powerful guitar riffs – y99u guys are missing a treat is you haven't heard Erney Isley get down
STEM educators take part in a five-day institute focused on how to manufacture guitar parts for their classroom or for the nationwide network of schools that are implementing the project. Modularized curriculum with assessments will cover the content provided as part of the institute. The primary focus of the institute will be the application of CNC technology as it relates to manufacturing guitar components. The participants leave this institute with the modularized curriculum and a custom guitar body they have designed and fabricated. The additional parts necessary to complete the guitar are also provided.
Over the years in my travels, I've seen more Peavey amps on real working musicians' stages than any other amp manufacturer. The fact that real, everyday working musicians use and depend on them also dictates that Peavey amps are out there making more money for real working musicians in total, than any other amp out there. Yes, I know, the big act shows have huge backlines of Marshalls behind them, but they are in the minority, as there are more lesser-famed bands and musicians out there working than there are "stars". I "stepped down" to Peavey almost 20 years ago, when I was beginning to have reliability issues with my Fender amps...issues I couldn't afford to keep having while on the road. I still have my old Fender amps, but I've been gigging regularly and exclusively with only Peavey for the past almost 20 years now. I still get the tone I want and need and the reliability I expect in order to keep making a living in music. And by the way, I've been gigging since 1963.
This is another classic in Fender's guitar roster. The Squier by Fender, Vintage Modified '51 is another example of how phenomenal Fender is as a company. This guitar is capable of producing versatile tones because of the SH pickup configuration and rotary pickup selector. The neck of this guitar is C-shaped which makes string bending easy as you like. This guitar has a strat body shape which adds to its cool, classic look.
Tube amps use the height of the 1940s electronic technology to give out what is widely considered the best sound quality to date. Since some people tend to be confused by this, it’s important to note that only their sound rendering circuitry is based on vacuum tubes (or lamps) while the equalizers and assorted bits employ transistors like any other piece of modern electronics, with no bearing whatsoever on how the sound will come out.
{ "thumbImageID": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-Burst/H64297000004000", "defaultDisplayName": "Rogue Rocketeer RR50 7/8 Scale Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Red Burst", "sku": "sku:site51343059402612", "price": "59.99", "regularPrice": "79.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-Burst-1343059402612.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-Burst/H64297000004000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Burst", "sku": "sku:site51343059402610", "price": "59.99", "regularPrice": "80.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Wine-Burst-1343059402610.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Wine-Burst/H64297000003000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51281539726430", "price": "59.99", "regularPrice": "79.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Black-1281539726430.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Black/H64297000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red", "sku": "sku:site51281539726431", "price": "59.99", "regularPrice": "79.99", "msrpPrice": "159.99", "priceVisibility": "1", "skuUrl": "/Rogue/Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red-1281539726431.gc", "skuImageId": "Rocketeer-RR50-7-8-Scale-Electric-Guitar-Red/H64297000002000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.
Chords are the heart and soul of playing guitar. Many guitar players seldom do anything else, other than strumming chords. The chord is the basic building block of guitar music. A chord is simply a combination of two of more notes played simultaneously. Different combinations give you different chords. There are different classes of chords, such as Major Chords, Minor Chords, Triads, Suspended Chords, Diminished Chords, etc...

In mid-’29, John Dopyera left the National company to start the Dobro Manufacturing Company along with his brothers Rudy and Ed, and Vic Smith. National String Instrument Corp. continued operating under Beauchamp, Barth et al. In 1930, the Dobro company name was changed to the Dobro Corporation, Ltd., with additional capital provided by Louis and Robert Dopyera. Dobro was, during this period, a competitor of National’s, although in this somewhat incestuous world, both got their resonator cones, plate covers and other parts, like tailpieces, from Adolph Rickenbacker.
This is sort of a corollary to the DI+Amp suggestion. While effects on bass aren’t as common as with guitar parts, some bassists will come in with these big rigs of effect boxes, and want to record “their sound”, which often is clearly overprocessed for the song. Rather than argue the point, let the player hear the sound he’s used to during tracking, but be sure to also grab a nice clean signal, prior to all the effects, usually straight off the bass via a DI. That way, if your concerns prove all too true come mixdown, you can turn to the dry track, and recreate those favored effects to a more appropriate degree, with studio tools. Even if the effected bass sounds good to you, many pedals and MI effect boxes are noisy, and you might have to recreate the sound anyway, to avoid problematic buzz or hiss from the player’s cool-but-dirty toys.
Ovation acoustic-electric guitars are unique, innovative and, for some players, almost addictive! Once you’ve played an Ovation, no other guitar may do. They have a different look and feel than most other acoustic guitars due to their design, which incorporates a wood top with a rounded, synthetic bowl shape instead of the traditional back and sides.
Fender also supply a variety of signature models, each with specifications similar to those used by a well-known performer. Custom Artist guitars are the Custom Shop versions of the Artist Series line, which significantly differ from the standard production models in terms of quality and construction, making these instruments much more expensive. As well as the other Custom Shop instruments, the Custom Artist guitars are available either as Team Built or Master Built items, some being exact replications of the specific artist’s original instrument, better known as “Tribute” series (featuring various degrees of “relicing”, such as Closet Classic, New Old Stock, Relic and Super Relic treatments, depending the model). Artists with models available in the signature range include:
: Palmer is a U.S.A. company based in Miami, FL. They contract out the building of cheap guitars to China and such; while reserving the high end, high priced guitars for those made in the states (like most guitar makers today). I had one that had a broken head stock. I paid $50 for it, just as a camp guitar. It sounded fair, but I could tell it was made cheap. I'd compare them to a cheap Cort, Mitchell, or Fender.
Ribbon mics exhibit a figure-of-eight pickup pattern. One useful close-mike application for achieving heavy rock sounds involves a ribbon mic (or large-diaphragm condenser set to a figure-of-eight pattern) aimed toward the center of the speaker, with a cardioid dynamic mic angled next to it at roughly 90°, aimed off-center, with the capsules almost touching. Record the mics on separate tracks, and with proper balancing the sound should be powerful and frequency-rich.
Kasuga produced their own house brand in Kasuga guitars. For a brief period of time the company produced Yamaha acoustic guitars. Kasuga guitars were first sold in America in 1972. Unlike many Japanese manufacturers who outsourced their guitar production in other factories outside the main maker, Kasuga produced all their products in-house. Badged guitars known to have been made by Kasuga include Conrad, Emperador, ES-S, Ganson, Heerby, Hondo, Mei Mei and Roland. Kasuga went out of business in 1996.
This can all get a little tricky and can become overwhelming especially if you have never tackled this type of job before. If this is the case, I strongly suggest starting with one of the easier models in regards to wiring e.g. Telecasters are significantly easier to work on as the scratchplate will often be pre-loaded with pickups. However, if you purchase a kit guitar such as an LP or you want to upgrade your electrical components (which is often the case with an entry level kit) understanding some basics about guitar electronics is useful.
The Gibson Mandolin-Guitar Mfg. Co., Ltd. was founded by Orville Gibson in 1902 in Kalamazoo, Michigan when he brought in a consortium of investors to finance expansion to keep up with demand. Orville had been selling his hand made instruments since 1894 and was awarded a patent for his one-piece designed mandolin in 1898. He also invented Archtop Guitars around that same time by applying similar lutherie techniques to those used on violins.
The Blues Junior's compact dimensions, light weight and pedal-friendly credentials have made it one of the most popular gigging combos in the world, but for 2018, Fender has updated it to the new Mark IV specification, which features various tweaks, including Celestion’s excellent A-Type loudspeaker. Controls include gain, bass treble and middle, reverb level and master volume, with a small push-button ‘Fat’ switch. In use, the Junior unleashes a stunning range of Fender tones, from spanky, sparkling cleans, to fat and smooth midrange crunch that’s spot on for blues and classic rock. The Fat switch adds a generous midrange boost and can be remote-controlled from a footswitch for greater versatility, while the improved reverb circuit is very impressive, with no noise and a smooth, warm delay that feels more integral to the overall amp tone, harking back to the best blackface reverbs of the 1960s. No matter what guitar you use, the Blues Junior flatters single coils and humbuckers alike, not to mention drive pedals with plenty of volume. The sounds are top-drawer, comparing well against many so-called boutique amps costing four times the price. Factor in the compact dimensions and light weight, and it’s easy to see why the Blues Junior remains a firm favourite.
Why does the material matter less than with an acoustic guitar? Because the body of an electric guitar is much less important in producing and amplifying the sound; all it really has to do is hold the strings so they're long and tight enough to make the kind of sound frequencies we want to hear. Although resonance still plays an important part in giving an electric guitar its tone, solid-body electric guitars generate most of their sound through an entirely different process from acoustic guitars. In fact, even though acoustic and electric guitars look similar, and you play them in a broadly similar way, they are quite different instruments.
Sound quality-wise, it’s too close to call. All modern Zoom, Line 6, Boss, and DigiTech multi-effects units sound excellent. Distortion sounds a bit better on the DigiTech, and if reverb is your thing it doesn’t get much better than the Lexicon verbs. The other multi-effects units might be better if you’re looking for more experimental sounds and textures. The DigiTech RP500 tends to be more conservative, and focuses on nailing the classics.

Unfortunately this guitar does not come with a solid top, but for its price you really can't expect much. Still, it is much better than what guitarists of old had to start out with! If you are looking for a beginner's guitar to test the water or if budget is limited, then you should check out the Epiphone DR-100. It currently comes in 3 colors - Ebony, Natural, and Vintage Sunburst (my personal favorite among the three). The MSRP is 182.00 but most online guitar shops sell it for $109.
Like Ibanez, Jackson is known for targeting the metal crowd. They have a variety of instruments available from affordable lower-cost guitars to high-end pro/enthusiast guitars. Jackson likes to keep their designs unique. Think of an 80s metal band and what they might be playing. If you thought of pointy guitars with sharp angles, Jackson might be what you’re looking for. Jackson not only sounds metal, it looks metal too. The Jackson King V, for example, is a staple instrument. If you know who Dave Mustaine is, you’ve heard of Megadeth. Because he was a co-founder and its guitarist. He is one of the people who made the Jackson King V as famous as it is. However, the design can be a bit too over the top for some people. Not everyone wants their guitar to be as “loud” as the sound it produces.
Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used.
As the name implies, TheFretWire DIY 175 kit is based on the popular ES-175 hollow body guitar, following its shape and configuration, but using more cost effective materials. More importantly, it lets you customize your own archtop as you prefer - you can make it into a classic jazz box, or add some cool paint jobs to turn it into a rockabilly style instrument.
In late 1966, Peter Green had the job of replacing Eric Clapton in John Mayall's Bluesbreakers. Mayall told his producer, "He might not be better [than Clapton] now. But you wait… he's going to be the best." Soon, with the original Fleetwood Mac, he was Britain's most progressive blues guitarist, with a Chicago-informed aggression heightened by the melodic adventure on albums like 1969's Then Play On. Green soon entered a dark age of mental and health problems, returning in the Nineties with more subdued but recognizable gifts.

Why Martin electric guitars have never been more popular isn’t too hard to figure out. Martin, whose expertise has always been in top-notch acoustics, never really put a lot of effort into marketing its electrics. They were always well made, and, especially in the necks, clearly “Martins.” In the final analysis, however, it probably comes down to being victims of the success of their acoustic brothers, and players have just never seemed to warm up to the idea of Martin “electric” guitars. For the savvy collector with a taste for quality and relative rarity, Martin electrics remain excellent and attainable prizes.

This thing has taken quite a rap from what I've seen. People griping about it not being as good as the previous model. I don't know much about the other model, I didn't have one. So, I'm unbiased. I've had tons of peddles, singles and multi fx. I absolutely love this! I've been playing for over 20 years on stage. I'm a worship leader at a big Church. This is great for replacing my single peddles. I thought it was very comparable in sound. I use it through an American Peavey classic 30 with an English Celestian speaker. It rocks, period. I think the sound quality is great. I don't need tons of options. I hate too many. I like have the excellent fewer options. They are great! I love how easy it is, I had it figured out right away. I've used both. On stage and studio. This is ... full review
If a guitar is going to be our other half it has got to be comfortable to play. Does that fit in on this one? It sure does! It would be easy to assume that if they have spent so much time making it look good they probably didn’t have time to make it ergonomic, but that’s exactly what they’ve done! The guitar has a deep belly cut, a hidden forearm contour and a neck joint that makes it easy to play high up on the fretboard.
For a long time Yamaha were regarded as one of the best producers of student guitars but their reputation didn't go far beyond that. And it's true that they make excellent guitars for beginners, I am one of the many who originally learned to play on their student nylon string C40. BTW I'm one of those guitarists who thoroughly recommend initially learning to play on a nylon string guitar.
Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
: "Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired
Let's now look at two real-life examples of what this would look like with a realistic setup. Our first example will be a linear sequence without an effects loop, while the second will use an amplifier effects loop. It should be noted that many pedals themselves can host their own effects loop, so how you set it up is up to you. It functions the same either way.
Masacre takes a great deal of my time, but in normal days I am also a guitar teacher in my hometown, Medellin. I counsel young rock bands as well, with the purpose of sharing my knowledge and experience with those who start in this road. I've been part of the selecting jury at several local rock festivals and when I am available and things work out, I join some of my friends and put together tribute bands to play at local clubs, paying homage to those bands that inspired us since childhood, such as Black Sabbath, Kiss, Ozzy Osbourne, Dio, and others.
Guitar effects pedals are a great way to get started with electronics. The simplest ones only require some basic skills to assemble. The few parts can be easily obtained, and the minimum of tools required can be purchased quite cheaply. Better still is the gratification from plugging it in for the first time and being able to incorporate a pedal that you made yourself into your music. With the skills you acquire, you can graduate from simple to more complex projects; maybe build an entire pedal board of your own effects. Your friends might ask you to build pedals for them too. What you learn can also be put to use with commercial pedals, as you will better understand how they work, and will be able to repair and hot rod old pedals. If you are interested in working at a repair shop, as a guitar tech, or for an electronics company in the future, your portfolio of home built pedals will be a great advertisement for your skills.

In the 1920s, it was very hard for a musician playing a pickup-equipped guitar to find an amplifier and speaker to make their instrument louder as the only speakers that could be bought were "radio horns of limited frequency range and low acoustic output". The cone speaker, widely used in 2000s-era amp cabinets, was not offered for sale until 1925. The first amplifiers and speakers could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.

Slot Peghead vs. Solid Peghead (steel string models): Most models converted from a 12 fret slot peghead to a 14 fret solid peghead around 1934 (except the OM series, which went 14 fret in 1929/1930 and the style 17 and 18 models which were available in 14 fret style in 1932). Basically if the guitar has a 14 fret neck, it will have a solid peghead. If it has a 12 fret neck, it will have a slot peghead. Note there were some post-WW2 gut string and classical models (i.e. 0-16NY) and some post-WW2 special order steel string guitars (i.e. 1967-1993 D-18S) which always have a slotted peghead.
To silence your guitar, go into the full-mute position discussed in Part I: let at least two of your fingers rest gently on the guitar strings, and don’t push down on any fret. Alternatively, bring the palm of your strumming hand down on the strings as if you were going to start palm muting. Practice playing power chords and quickly muting them either way.
I put the pots into a wiring jig I made for Les Pauls: a piece of pickguard plastic with holes to match the LP control arrangement (cardboard works just as well). This lets me do my wiring outside the body, and everything fits back in neatly.The guitar’s controls were on a metal mounting plate. We decided to ditch the plate, sticking with the ’50s theme.
Next models is another semi-hollow design, only this time we are looking at a bit more neutral guitar. I wouldn’t go so far as to say that it’s somewhere between a solid body and a semi-hollow. That would simply be wrong, but it does have a harder tone for a model of this type. It didn’t take me long to find the right setup, and off we went. Sound, playability – everything is on point.

The neck is also made of mahogany and is hand set into the body. Looking at the fretboard, we see a standard rosewood design with white binding and classic trapezoid inlays. Epiphone went with a set of Alnico Classic humbucker pickups. These are very close to what the original Gibson solution had to offer. Classic rock and blues just flow out of these, although you are more than free to crank up the gain and blast some heavy riffs.
It depends on whether you are playing with someone, or you just wanna start to play home in your bedroom. If you play with others, you need an amp that can play loud enough to follow the bass and especially the drums. Marshall make some great tubeamps, but also Vox make some great amps, where this one on 40 watt with effects incl are real good. Sound like a tubeamp, and have a 12ax7 in the frontamp.
Another great book by Nicolas, this one shows you exactly how to create your own personal tone using amplifiers, effects and your guitar itself. Any beginner will benefit from this clearly written guide including everything from a breakdown of all the different ways to individualize your guitar playing technique, to information about virtual effects.
We think this entry-level multi effects pedal is a perfect fit for beginner guitarists due to the simple layout and the fact you have three extremely useful effects at your disposal. You have individual overdrive, distortion and delay effects circuits as well as a built-in, footswitch activated tuner within this budget friendly multi effects pedal – basically all your bread-and-butter effects that will allow you to sculpt some seriously great sounds.
Electric guitars vary by type. Some are designed for beginners, while others are customized for professional guitar players. Most of the major electric guitar brands are available in a variety of different styles, each designed to best suit a customers' specific playing needs. The most popular electric guitars have great rock sounds and the best bodies. On electric guitars, strings affect the sounds too. Ease and sound are certainly big factors to consider when choosing a new electric guitar.
In mid-’29, John Dopyera left the National company to start the Dobro Manufacturing Company along with his brothers Rudy and Ed, and Vic Smith. National String Instrument Corp. continued operating under Beauchamp, Barth et al. In 1930, the Dobro company name was changed to the Dobro Corporation, Ltd., with additional capital provided by Louis and Robert Dopyera. Dobro was, during this period, a competitor of National’s, although in this somewhat incestuous world, both got their resonator cones, plate covers and other parts, like tailpieces, from Adolph Rickenbacker.
One other effect that depends on EQ modulation is the wah pedal. As you rock forward on the pedal, the sound becomes more trebly. As you rock back, the treble range is muted. In the middle positions, a wah produces a nasal, midrange-heavy tone that is interesting and useful in its own right. Since you can change the wah's tone constantly while you're playing, it's a very dynamic and expressive effect that can become an integral part of your playing. Jimi Hendrix was one of the first guitarists to exploit the wah’s capabilities.
{ "thumbImageID": "GigMaker-EG-Electric-Guitar-Pack-Black/516049000001000", "defaultDisplayName": "Yamaha GigMaker EG Electric Guitar Pack", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274115033940", "price": "259.99", "regularPrice": "259.99", "msrpPrice": "429.99", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-EG-Electric-Guitar-Pack-Black-1274115033940.gc", "skuImageId": "GigMaker-EG-Electric-Guitar-Pack-Black/516049000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Metallic Red", "sku": "sku:site51274115034206", "price": "259.99", "regularPrice": "259.99", "msrpPrice": "429.99", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-EG-Electric-Guitar-Pack-Metallic-Red-1274115034206.gc", "skuImageId": "GigMaker-EG-Electric-Guitar-Pack-Metallic-Red/516049000047000", "brandName": "Yamaha", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Metallic Dark Blue", "sku": "sku:site51274115034124", "price": "259.99", "regularPrice": "259.99", "msrpPrice": "429.99", "priceVisibility": "1", "skuUrl": "/Yamaha/GigMaker-EG-Electric-Guitar-Pack-Metallic-Dark-Blue-1274115034124.gc", "skuImageId": "GigMaker-EG-Electric-Guitar-Pack-Metallic-Dark-Blue/516049000087000", "brandName": "Yamaha", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
To answer this question, all you need to do is close your eyes and focus on what is currently going on around you. Just about every sound you hear, whether you are at home or on a busy street, is packed with some dose of reverb. In nature, sound reflects off of multiple objects and surfaces across various distances. Both our ears and our brains are used to reverb by default. That is one of the reasons why even an artificial reverb effect tends to make a track more enjoyable.
It has a solid poplar body with a maple neck and rosewood fingerboard, and based on the early reviews of the Epiphone Les Paul SL, the fit, finish and general playability are all pretty good. It’s loaded up with Epiphone’s reliable tune-o-matic bridge, a volume and tone knob, as well as a three-way selector switch to toggle your pickups and dial in tone. The hardware does feel admittedly cheap, but the general consensus is that this guitar ships well-made, well-setup and more than appropriate for a first-time player.
There were differences between the pickups as well – the National had slanted units under enormous covers, while the Supro featured 8-string versions of the Alnico V pickups found on many Spanish-style guitars. The difference in tone proved to be minimal. The Supro has a more refined sound than its cheaper cousins with the famous string-through pickup, but it can still be raw and biting when required. Although it is a single-coil pickup, it has excellent hum rejection and sounds wonderful either overdriven or clean. The guitar has plenty of sustain and a surprising level of output, making it an excellent instrument for rock and roll as well as country music.
Melodious tuning powerful pickups and with supreme body ESP is also famous for its affordable prices. This brand is famous for its quality and best for the lovers of Electronic Guitar lovers. The Japanese company was founded in Tokyo Japan in manufactures some best  brands like  “ESP Standard”, “ESP Custom Shop”, “LTD Guitars and Basses”, “Navigator”, “Edwards Guitar and Basses” and “Grassroots”.
I am not completely sure this tuner info is completely accurate. Sorry about that... Remember as a general rule Grovers were used on style 21 and above, and Klusons were used on style 18 and lower. There are some exceptions (like during 1940 to 1945, and pre-1930s). On pre-war Grover tuners, there are basically two types used on Martins: G-93 (round button 'butterbean') and G-98 (scalloped buttons, aka "Sta-Tite"). Both came in 6:1 and 12:1 tuning ratios, with 12:1 coming about in 1938 (and replacing the 6:1 ratio). The post-1938 12:1 ratio Grovers can be always be identified since they combine the thin seamed tuner buttons with the long pointed baseplate, and the tuner gear is screw mounted. The 1938 and prior Grover G98 tuners have a thin seamed button combined with the a square tipped baseplate, and always had the 6:1 ratio. They also had the riveted tuner gear. Ater WW2 the G98 was reintroduced with pointy baseplates and a screw mounted gear, and this was copied by Waverly, Grover, Schaller, etc after the war. Also Martin used original Waverly tuners (open back, rounded base tips, butterbean buttons) after WW2 on 00 and 000 and some D guitars style 18 (and some 28) in the late 1940s and 1950s.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Custom - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Diecast, Gold, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
It’s important to remember that these setups are not set rules that must be followed.  You can get a variety of unique sounds by placing your effects in unorthodox locations.  It’s common to run into that special sound that came about as a ‘happy accident’ when setting up your effects.  Using these suggestions, you can build up your own pedalboard to suit your individual taste.

Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.

So you want to learn how to play guitar but don’t know where to start? No worries. This how to play guitar for beginners guide will cover all the basic requirements to get you started with playing guitar. The guide is split into 2 sections: The Basics – where you’ll learn about the various parts of the guitar, how to hold the guitar and how to tune your guitar. Playing – where you’ll learn popular chords, strumming techniques, and how to read guitar tabs. This guitar for beginners guide is meant for guitarists just starting out, however there are also tips and

If you're getting your amp for the purposes of playing out with a band, it's very tempting to invest in a large amplifier, whether that means a big combo or a half-stack (don't even mention a full stack). I get it; it's what the pros use when they're rocking out at festivals. The reality there is that the vast majority of the time, whenever you see a guitarist with a wall of sound, it's comprised mainly of dummy cabs with no actual speakers. It's for the look.
Ibanez is a Japanese guitar brand, which is established in the year 1957. They provide Acoustic, Bass Guitars and Semi-Acoustic Guitars at different price segments. The company is owned by Hoshino Gakki. Their headquarters located in Nagoya, Aichi, Japan. They also manufacture amplifiers, mandolins and effect units. They become one of the top ten best guitar brands in India. The price range starts from Rs. 13,299/- onwards (approx). For further details, visit
When it comes to amplifiers that won’t break the bank, but sound loud enough to break your windows, Orange Amplification know exactly what they’re doing and they do it well! The Orange Crush 12 Solid State 12W 1X6 Combo is one of the best cheap amps in the music scene and one that can easily be used on stage and in the studio due to its legendary tone and reliability. This Orange Crush 12 Solid State 12 watt amplifier features a 6” Voice Of The World speaker custom designed by the team at Orange amplification to deliver punchy and articulate sound.

Epiphone's passion has always been about more than just making guitars. It has been about making music. It has been about understanding what is inside every musican that makes them want to, have to, express themselves. And understanding the myriad musical styles, where they are going and how they might develop. For over one hundred and twenty-five years they have continually looked for new and better ways to help players take their music farther.
I have tried many different wiring schemes as well, with 3-way switching, 3-way with coil taps, and even bypassed the tone control (since I never dial back the tone in my playing anyway). I have played this guitar through high-gain amps (Carvin V3, all three channels, Carvin Vai Legacy), through VOX AC15, Vox AC30 (both with Greenbacks and with Celestion Blues speakers), and an Orange 2x12 combo. In all of these excellent amps where my Carvin SC90 guitar sings and sparkles and does whatever I want it to, this Frankenstrat with Duncans or with Carvin P'ups sounds like a fart after 12 glasses of cheap Charles Shaw wine.
I recently purchased this guitar,and was wondering if you had any insight of it? i.e.-the pick up selector switch has a reverse,mono,& off setting.Question is:I would like to know if their are certain settings that only work,because I'm just not hearing that much of a difference in sound with this thing? I am running through two amps with the "VOX" original stereo chord,it has 12 volume & 12 tone knobs.
In the 1980s, when shred metal was at its peak, Ibanez took a big share of the market with models that were geared towards the fastest, loudest players – thin necks, floating double-locking tremolos and high-output pickups. These guitars were endorsed by modern day virtuosos such as Paul Gilbert, Steve Vai and Joe Satriani, with many artists designing their own custom Ibanez models.

Building a rare 4005 Rickenbacker takes the hands of a master. And this master has not only built one but also created the "Jazzblaster" line of custom guitars with bodies that resemble Rickenbacker and necks inspired by Leo Fender. He also builds custom basses. "I like building beautiful things," he says. A few of his custom guitars were recently picked up to be shown to rock star royalty like Tom Petty, Lindsay Buckingham and Joe Walsh. He's played and repaired guitars. Steve Stevens, Green River Ordinance, Rocky Athans and Eric Clapton have sought out his services. He's even touched one of Jimi Hendrix's legendary axes.

Sooner or later you may want to experiment further: What happens if I use a different opamp here, or change a capacitor value there? Specifying your own components is the next step. Two of the specialty jobs in building a typical effects pedal are the design of the circuit itself, and the production of the printed circuit board (PCB) on which to install the components. The next logical step from a kit is to order a pre-built PCB and then customize the component and enclosure choices yourself. AMZ effects, is the go-to place for a huge variety of pre-designed PCB’s. The cost is quite low and the projects include clear documentation providing guidance on different options and components.
{ "thumbImageID": "Player-Precision-Bass-Maple-Fingerboard-Black/L21559000004000", "defaultDisplayName": "Fender Player Precision Bass Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Polar White", "sku": "sku:site51500000219917", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Precision-Bass-Maple-Fingerboard-Polar-White-1500000219917.gc", "skuImageId": "Player-Precision-Bass-Maple-Fingerboard-Polar-White/L21559000005000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000219923", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Precision-Bass-Maple-Fingerboard-Black-1500000219923.gc", "skuImageId": "Player-Precision-Bass-Maple-Fingerboard-Black/L21559000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Buttercream", "sku": "sku:site51500000219915", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Precision-Bass-Maple-Fingerboard-Buttercream-1500000219915.gc", "skuImageId": "Player-Precision-Bass-Maple-Fingerboard-Buttercream/L21559000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tidepool", "sku": "sku:site51500000219921", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Precision-Bass-Maple-Fingerboard-Tidepool-1500000219921.gc", "skuImageId": "Player-Precision-Bass-Maple-Fingerboard-Tidepool/L21559000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Color Sunburst", "sku": "sku:site51500000219916", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Precision-Bass-Maple-Fingerboard-3-Color-Sunburst-1500000219916.gc", "skuImageId": "Player-Precision-Bass-Maple-Fingerboard-3-Color-Sunburst/L21559000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The Yamaha LL16 gives you high-end features for a lot less money, starting off with its solid Engelmann spruce top and solid rosewood back and sides. This all solid body results in richer and more detailed acoustic tone, something that you will have to pay top dollars for from other acoustic brands. It also sports a slightly smaller body that gives it an elegant appeal, adding to its already favorable affordable price and top-tier specs.
Originally this effect used 1/4″ tape going round a machine like the Echoplex. It then recorded whatever you were playing and played it back to you a set time later.Since its launch in the 1950’s tape based delay started to appear in more and more recordings. Its saturated sound and imperfect repeats gave it some stunning character that is still loved today.Now tape is dwindling so most people have moved on to emulated digital pedals. These get close to the sound of an original tape unit without any of the added maintenance.
Masacre takes a great deal of my time, but in normal days I am also a guitar teacher in my hometown, Medellin. I counsel young rock bands as well, with the purpose of sharing my knowledge and experience with those who start in this road. I've been part of the selecting jury at several local rock festivals and when I am available and things work out, I join some of my friends and put together tribute bands to play at local clubs, paying homage to those bands that inspired us since childhood, such as Black Sabbath, Kiss, Ozzy Osbourne, Dio, and others.

In addition to modern versions of tricones and single cone resonators, National Resophonic also produce Dobro-style guitars. This company made the Model D during the latter part of the 2000s. Production of the Model D guitar has now ceased, but a few dealers in the UK and USA have stock available. National Resophonic are now producing their Smith & Young `Spider Cone’ models and the Model 11 is built on traditional Dobro lines. Also, Goldtone, Paul Beard and a number of custom builders are producing good guitars.

Even by the mid 1970s costs to manufacture instruments in Japan were rapidly rising. Labor was still cheaper than in the USA (it isn't anymore), but real estate, raw material, fuel, transportation costs and virtually all other manufacturing costs were fully as much if not more in Japan as in the USA. The Japanese were able to compete in the international market due not only to low labor costs at that time but also due to highly efficient manufacturing techniques and the fact that their low-cost workers were skilled and highly motivated.

Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All of our kits have a build difficulty rating to help you determine which kit is right for you.
Fender is a guitar pioneer. Its history of making quality guitars stretches back decades. The Fender Modern Player Telecaster Thinline Deluxe is another classic by Fender. This guitar offers both sweet and aggressive tones thanks to its two MP-90 pickups. With its 9.5-inch radius, this guitar is incredibly comfortable to play. There are 22 medium-sized frets and a six-saddle hard-tail bridge. This guitar is easy to tune and stays in tune.

If you really want your guitar strings to stand out as well as your playing does, then these colourful options from DR are a novel eye-catcher. For even more fun, stick them under a UV light and they’ll glow, too! They might also serve a practical purpose for beginners, too, as new guitarists can quickly identify specific strings based on their colour.

The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.[14] Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.

Revamp the entire company staff from the C.E.O. down to the lowest level managers. Give workers raises. Treat them like human beings. Be nicer and friendlier. Reduce stress levels and not have such a toxic atmosphere. Make the daily numbers actually feasible and actually attainable without having to work 15 hrs. to achieve them. Have accountability on all levels - checks and balances- from C.E.O. down to lower management. Recognize the workers are human, and not robots!
The first thing is to adjust height. If you have the first type, you will need a flathead screwdriver. The two posts holding the bridge have flat slotted heads showing at either end. You can turn these clockwise to lower the strings or counter-clockwise to raise them. Find the string height that suits you. For an electric guitar, it will be about 1/4" off of the neck or lower. Get the strings as low as you can for comfort, but be careful that your frets don't start buzzing or that the strings are not coming into contact with pickups or any other parts. If this happens, your strings are too low. If the bridge is the second type, you will need a very narrow Allen wrench to adjust the saddles; you will find the Allen heads on either side of the saddle top.

The customer then tells me that it was the second brand new preamp that they failed to get working. The first one they couldn’t get working and blamed it on a defective preamp. Could have been, who knows? So the guy orders another new preamp and they still couldn’t get it working after 2 weeks. Sadly, they charged him anyway and he left with a bass that still was not working. So he brings it to me after being recommended by some of my very kind customers.
Paul Reed Smith Guitars SE Standard 24 is their baseline model that brings a lot of the features you can find in more expensive PRS guitars. It offers a great combination of electronics, hardware and tonewood. All at a price that makes it a bargain. If you’re looking for a neutral sounding guitar with enough punch to play whatever genre you’re into, Paul Reed Smith Guitars SE Standard 24 is worth checking out.
48-HOUR RISK FREE TRIAL PERIOD (Includes guitars, effect pedals; excludes speaker cabinets and amps). Returns for 100% refund will be issued if the customer expresses their desire to return the item by email, phone or Reverb Message, within 48-hours of receiving the product. If done so, Moore Guitars will issue a FedEx prepaid and insured shipping label via E-mail at our expense. We require that the item be return shipped within 24 hours of contacting Moore Guitars of your desire to return the item. If the item is not shipped within the 24 hour time period the you will be moved to the next tier of our return policy. This is our "try it out in your own jam room" return policy. Just FYI, this is not a "Gig it, and Return It" Opportunity. Items purchased during Official Sales Events are not eligible. See "After 48-Hours" for returns on these items. AFTER 48-HOURS Returns after 48 hours and up to 14 days may be authorized and a full refund will be issued for any item, for the purchase price. Moore Guitars will issue a FedEx prepaid and insured shipping label via E-mail. If your purchase originally qualified for free shipping, the actual shipping charges will be deducted from your refund, as will any/all return shipping charges. Returns occurring between 15 and 30 days will be exchanged for 100% toward a trade of equal or lesser value of in-store product, OR 85% of the purchase price less shipping to and from the customer. All returns for any reason and at any time must be cleared through a Moore Guitars Representative. No exceptions. Any damage due to shipping must be reported immediately upon receiving the item. If an item is damaged due to shipping, we will refund the purchase price and the shipping costs to ship the item back to Moore Guitars. All returned items must be complete, unregistered and in the original condition and packaging with all accessories and complete documentation (Owner's Manual, Warranty Card, quick start guides etc.) No returns on Special Orders, Pre-orders, Trades, Close-outs, or Blow-out items. Return requests on all non-domestic United States shipped items must be submitted via email or phone within 24 hours. A full refund will be issued less shipping costs to and from the buyer on any item once we have received it and inspected it. No refunds will be issued for non-domestic United States shipped items after the 24 hour window has closed. ALL RETURNS ARE SUBJECT TO AN INSPECTION BY A MOORE GUITARS REPRESENTATIVE AND A REFUND WILL ONLY BE ISSUED ONCE WE DEEM THE ITEM TO BE IN THE SAME CONDITION AS WHEN WE SHIPPED IT. Our return address is- Moore Music, 301 North Royal Avenue, Evansville, Indiana 47715 Thanks, The Crew at Moore Guitars
Solo, lead, and rhythm guitarists everywhere can now access the best selection of instantly downloadable digital sheet music and guitar tab on the internet. Put down the pick for just a moment and put your fingers to work browsing through's vast archives of guitar tabs ready to be enjoyed by musicians of all ages. Our collection features a weekly updated catalogue of some of guitars greatest compilations.
It would not be a lesson on electric guitars and DIs without mentioning Radial’s JDX 48. This DI box, designed to be positioned between an amplifier’s head and speaker, allows for the direct amp sound to travel to the PA and monitors for a more realistic snapshot of the guitar tone. The magic occurs as the JDX 48 is wired to capture both the signal coming from the guitar amplifier head and the back-electromotive impulse from the loudspeaker. The JDX 48 also allows for 100% consistent tone between shows which is impossible with the many variables related to microphones.
Of course, as guitar players we still want to remain open to a number of tonal aspects that happen after the front end of the initial attack. These elements aren’t necessarily in the front part of the very beginning of a guitar tone, nor are they delegated to the trail of lingering sustain. “The reason why people sound a certain way is because of little nuances, those little pull offs, those hammer ons, those plucking [dynamics]— the sequence of those things. Think of it as a sonic palette. That sequence is what makes the artist sound like himself.”
Ampeg was swallowed up by Japanese electrical giant Magnavox in 1971, when they wanted to get in on the electric guitar copy craze of the 1970s. Magnavox produced electric and bass guitars under the Stud badge as well as the successful Ampeg brand. It's been suggested that Magnavox was also responsible for producing Selmer acoustic guitar badges during this time, but that has not been verified. Selmer was sold to Magnavox around the same time they bought Ampeg, so it certainly seems plausible they could have made Selmer acoustic badged guitars as an offering for that market. Stud badged guitars were made until '75, with Ampeg guitar production continuing until 1980. Opus was another badge made by the company. Magnavox lost their interest in Ampeg shortly thereafter and the brand languished until it was resurrected over a decade later by another American company.
The quarter-sawn mahogany neck has a rounded “C” neck shape and it’s topped with a smooth 22-fret A-grade dark rosewood fretboard with small block pearloid inlays. The 2019 Gibson ES-335 Figured also features an ABR-1 bridge with titanium saddles for added sustain and clarity and Memphis Historic Spec II humbuckers. In addition, this classic axe now has MTC Premiere Controls.
Solid body guitars offer a fantastic platform for builders, allowing them to craft the wood into literally any shape. Naturally you’ll probably want to opt for a guitar with a single-cutaway Les Paul or Telecaster style shape, or a double-cutaway shape like a Stratocaster, Yamaha Pacifica, or Ibanez’s RG. However, the more extroverted beginner can check out some cool styles that always catch the attention, such as V or Z shaped guitars, or anything from Dean Guitars – especially if you want an eye-catching paint job!
Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.
In the 1920s, the earliest combo amplifiers did not have any tone controls. Tone controls on early guitar amplifiers were very simple and provided a great deal of treble boost, but the limited controls, the loudspeakers used, and the low power of the amplifiers (typically 15 watts or less prior to the mid-1950s) gave poor high treble and bass output. This made these early amplifier/speaker systems a poor way for upright bass players to amplify the sound of their instruments.
So, I’m 50+, I’ve never played a guitar, and I’m trying to decide on an electric guitar. I’m less concerned with the brand name, more concerned with high quality and workmanship, and last, I like the tone of the guitars played by the late Pete Ham of Badfinger (especially Baby Blue), and Joe Walsh. I know Ham played a cherry red Gibson SG standard, but I’m seeing quite a few mixed reviews on the quality control and workmanship of the current SGs. I listen to a lot of jam band music (i.e. Widespread Panic) and enjoy the rhythm guitar best. So, where to start and stay under $2000 to get a guitar that will produce the type of sound I’m looking for?
\n\n Harmony branded some of their old acoustic guitars with the Nashville\nname. \n\n There was a Japanese company called Nashville\nMusical Instruments NMI \n\n I have an acoustic guitar with no name on the headstock, and\na label inside that reads nothing but Nashville. I tracked down the information\non it once. It's a cheap guitar from the 80’s, made overseas, imported by a US\ncompany that sells children’s toys now. I can't for the life of me remember the\nname of that company now. I was searching for it, with no luck, when I found\nyour question. \n\n There is also the Nashville Guitar Company NGC based in\nInglewood, TN \n\n
Let’s kick things off with one of Schecter’s top tier models. Blackjack Slim Line C-1 FR is by far one of their more refined guitars. It’s slim, lightweight, and brings the kind of thunder that will give you goosebumps. With a set of premium Seymour Duncans, we expected nothing less. My brief encounter with this axe was one of the most enjoyable playing sessions I’ve ever had, and I’ve played many, many guitars.
One of the most popular and widespread pickups in history is the single-coil, played by more legends than we can count – from Jimi Hendrix and Eric Johnson, to Jeff Beck and Yngwie Malmsteen. Renowned for their delightfully bright and clear tone, the single-coil is exactly as the name describes – a single set of magnetic pole-pieces, wrapped in a thin wire coil. Simple in design, but complex in their sound, with exceptional dynamics, sparkling highs, and huge twang. They are great for all styles of music, from classic rock to country. Generally found on all kinds of models from a huge range of brands, single-coils are famously the exclusive pickup on both Fender Stratocasters and Telecasters. The DiMarzio DP419 Area 67 is a good example of a great single-coil pickup and a must for Hendrix fans, although check our dedicated single-coil category for more.
DR Strings makes strings that were specifically designed for drop d tuning, other alternate tunings, and even standard tuning. Known as DDT strings, DR spent over two years perfecting them. DR created a new patent pending method for constructing these strings to ensure great performance with lower pitches. Because of the amazing construction, and their ability to quickly lock into tune so quickly, DR calls their DDT's "Superstrings". Why not try a set? DDT's are available for electric guitar or bass guitar.
Dyna Gakki began production in 1972 in the city of Nagano, Japan. They manufactured guitars for Fender Japan and Greco, so they couldn't have been a terrible manufacturer as Fender is very choosy about outsourcing their product. Dyna may have been a source for Japanese manufacturer Yamaki. Dyna also produced the infamous Ibanez badges for a short period of time.
There were also a number of guitars that featured the same headstock style as the 700-800 models that featured symetrical hollow or semi-hollow bodies similar to some of the Gibsons. Gibson aficionados refer to the bodies as having "Mickey Mouse ears". One model had a deep jazz guitar-style body. They all had what appear to be humbucker pickups, some black and some plated. The Kent name only appeared on the headstocks.
Separate bass amplifiers which do not contain speakers, often called "heads" or "amp heads", are usually integrated units, with a preamplifier, equalizer (bass and treble controls) and a power amplifier combined in a single unit. Some players use separate preamplifier/power amplifier setups, where one or more preamplifiers drive one or more power amplifiers. In the latter example, a bass player can use a bass-specific power amplifier or use a sound reinforcement system power amp. Bass amp heads are available in high-wattage power ratings that are not available in combo units. For example, the Ampeg SVT8-PRO amp head puts out 2,500 watts RMS at 2 ohms, a power level that is high enough for the largest 8x10" cabinets and the largest venues (stadiums, outdoor festivals, etc.).
{ "thumbImageID": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst/J32680000003000", "defaultDisplayName": "Fender American Elite Jazz Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000005995", "price": "2,149.99", "regularPrice": "2,149.99", "msrpPrice": "2,150.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst-1500000005995.gc", "skuImageId": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Tobacco-Sunburst/J32680000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000005994", "price": "2,149.99", "regularPrice": "2,149.99", "msrpPrice": "2,150.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Elite-Jazz-Bass-V-Maple-Fingerboard-Natural-1500000005994.gc", "skuImageId": "American-Elite-Jazz-Bass-V-Maple-Fingerboard-Natural/J32680000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Most people who use this alternate tuning method change the pitch of the sixth string only, the low E, from E to D. This is frequently used for Rock songs when you want a darker tone, such as with Heavy Metal. In addition, dropping the E string two steps to D means that you can play power chords with one finger. Some people also drop the first string (high e) down to D, resulting in D-A-D-G-B-D.
Archives of the best free VST plugins (electric guitar and acoustic guitar plug-ins) for download. We have created audio / video demos for the most of VST plugins so that you can hear how they sound before you decide to download them. You don't have to register for download. The most of VST plugins in our archives are provided with a link to VST plugin developer so that you can donate to the author if you wish.

Finally, new by ’41 was the No. 130 Supro Rio Spanish Guitar. This was a slothead Regal roundhole flattop done up in a “radiant blonde hardwood body.” It had an 13″ body and logo plate on the head. In place of the typical acoustic bridge was the same square pickup/control panel found on the Clipper. The cord was permanently attached and sort of snuck out from under the control plate on the top. Cost was $33.
I know of two amp-and-effects modeling apps for the iPhone/iPod Touch/iPad, both of which are great and allow you to get realistic amp tones through your headphones. AmpKit and Amplitube both do a great job of simulating all the standard amp models and pedals, and they aren't very expensive. I use and prefer AmpKit myself, and between the app and the guitar-to-iPhone interface, I spent a total of $50.
Martin also developed a line of archtop instruments during the 1930s. Their design differed from Gibson and other archtops in a variety of respects–the fingerboard was glued to the top, rather than a floating extension of the neck, and the backs and sides were flat rosewood plates pressed into an arch rather than the more common carved figured maple. Martin archtops were not commercially successful[citation needed] and were withdrawn after several years. In spite of this, during the 1960s, David Bromberg had a Martin archtop converted to a flat-top guitar with exceptionally successful results, and as a result, Martin has recently begun issuing a David Bromberg model based on this conversion.
There are several aspects that make the acoustic guitar different from the electric one. The most notable difference is the fact that the acoustic types do not need a source of electricity or rather they do not have to be plugged in for them to be heard. They are relatively large and are built with a hollow chamber for the magnification of the guitar’s resonance thus giving out sound that originates from the plucked strings. It also has a bridge that is essential for the transmission of vibration of the strings to the body. They are self contained, needing minimal preparation to play. In other words, they are the guitars to be bought by all those looking for simplicity.
O WOW!...I love...Fallout 4 is a great game like the rest of the fallout series but if your a fan of the series u will be kinda of down that the choices u make don't affect the outcome of the game because they made more of a story they wanted to tell but don't lose hope still a good game and they might make a sequel to new Vegas and there just might be a Multiplayer for new Vegas 2....The world is so large and the gameplay non linear (which is good and bad), I find if I walk away from the game for a while, I have to spend a lot of time figuring out where I was and where I stashed things when I come back to it later.
That wraps it up folks! We hope you found some inspiration from our chart and managed to get a little closer to finding your best guitar for jazz. Now it’s simply a matter of reading some reviews, watching some videos and making a decision! Don’t forget, if this is your first guitar, you’ll need to buy a good amplifier to go with it. If you liked our stuff, you can subscribe to our newsletter for more sensational guitar deals.
But not everyone hated the album. Pete Cosey was later told by Hendrix's valet that before he would perform live, he'd listen to "Herbert Harper" for inspiration. In the '70's, when Marshall Chess went to visit the Rolling Stones rehearsal space, he saw a poster on the wall for the Electric Mud album. Led Zeppelin's bassist John Paul Jones cites Electric Mud as the inspiration for the basic riff behind "Black Dog." Marshall Chess also notes "the English accepted it; they are more eccentric." Strangely enough, rapper Chuck D of Public Enemy has emerged over the years as the biggest supporter of the record, stating "To me, it's a brilliant record. I've played it a thousand times." Chuck D also explained part of the intent of the record saying "It took me a while to warm up to traditional blues, but what struck me right away was the Electric Mud thing." Based on the success of Electric Mud, another blues musician on Chess, Howlin Wolf, was forced into recording a psych record. This Is Howlin Wolf's New Album (subtitled And He Doesn't Like It) (1969) isn't as good as Electric Mud although it did yield a minor hit with a psyched out version of "Evil." Chubby Checker even released a psych record (Chequered (1971)) that sounds better than you'd expect, though it only came out in England.
Amplesound's AGM Lite is a freebie guitar VST that can run as a plugin or as a standalone. (Standalone == no digital audio workstation required, just open the program, turn on your speakers and play). In either version, one can write strum patterns with the point-and-click cursor, and use the on-screen keyboard to make things happen without ever touching a keyboard.
The FR6UC's matt black flat finish and lack of bling lends the instrument a mean, no-nonsense aesthetic that would be a perfect fit for the modern metalcore player. There's an ebony fingerboard and its neck is a five-piece affair, with two thin strips of 0.5mm walnut between three sections of maple. The FR6UC's suitably rock-looking distressed pickup covers house a pair of Bare Knuckle Aftermath humbuckers with "accelerated bass response for exceptionally fast tracking of high-speed staccato riffing with crushing midrange and precise high-end articulation". The 14.7k-ohm bridge unit comprises a trio of ceramic magnets, while the neck is Alnico V with a DC resistance of 11.5k ohms. This instrument is built cleanly with excellent fretwork, as you would expect from a Japanese guitar at this price point, although it has to be noted that - considering its relatively compact proportions - it's a little on the weighty side, weighing in at 3.8kg (8.4lbs). The FR6UC's Bare Knuckle Aftermaths in full humbucking mode are perfect for a gamut of king-size-yet- articulate heavy rock tones, from Foo Fighters and Queens Of The Stone Age right through to Deftones and Slipknot. That said, the Aftermaths are by no means all about metallic high gain; back off the volume and switch to position two or four to get one of the inner coils in isolation and you'll enjoy pleasantly springy Strat-style tones. It may be none-more-black in appearance, but there's a broad range of hues on the FR6UC's sonic palette.
It features a solid mahogany top, supported by laminate mahogany back and sides, which gives a warmer tonality and a very earthy vibe. It also comes with Graphtech NuBone nut and saddle, a premium feature that you normally have to pay extra to add into your guitar. Giving this guitar its amplified voice is a Fishman Presys II 301T electronic pickup/preamp system that comes with a built-in tuner. On top of all that, the Washburn WL012SE does not skimp on ornamentation, which includes the Washburn Parquet rosette and rosewood bindings.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
Bowers loves combining incredible chops with strong melodies, and his influences read like a “Who’s Who” of guitar heroes. Included are such high-tech players as Steve Morse, John Petrucci, and Steve Howe. While talking with Frank, I learned that he has had two of his Les Pauls customized to accommodate a push-pull tap switch on their tone knobs. In the normal position he has full control of his Seymour Duncan humbuckers; in the pulled-up position he goes to a single coil “spin-a-split” configuration that allows him to get more of a “Tele” tone at zero—or he can dial in a bit more of the other half of the pickup to emulate more of a P-90 sound. The thinner “Tele-ish” tone cuts better, allowing more clarity on his leads and rhythm patches.
I disagree, not saying that you can hear tonewoods but saying that it isnt just the string and pickups that make a difference. There is a huge difference in how a string vibrates and pickups do pickup resonances, otherwise a semi hollow would sound exactly like a solidbody and would never feedback. Get some humbuckers put them in a telecaster and then put them in a 335 and tell me they sound exactly the same. What is important is scale length (string tension), weight and various things like bridge design. Get a hardtail strat with strat pickups and then route it for a trem bridge ... it will sound different, maybe minor or major depending on what but it will change the tone.
Pickup(s) 3 or 2 single-coils, with the latter having a hot humbucker in the bridge position,[1] with the exception of the Acoustasonic Strat and Stratacoustic models, the only acoustic Stratocasters.[1]Most Stratocasters generally came with a pickguard; on certain high-end versions, the pickguard is absent. There are also select models that come with active electronics and HSH, HHH, HH or Hpickup configurations.Humbucker-equipped Strats are often referred to as “Fat Strats”, in reference to the fact that humbucking pickups usually tend to have more bass in the output signal than single coils, thus making the sound “fatter”.
The filters and shifters group also shapes the waveform but in a different fashion than the dynamics group. First and foremost, now that you've gotten rid of noise and extreme volume variances, you want to use an equalizer to tweak your tone. You may roll off extra bass frequencies and increase some high frequencies while dipping the mids. You want this done before you apply the more obvious effects in the next groupings.

For visual clarity, I’ve indicated ground connections with a down-facing triangle. As you probably know, all ground wires must be electronically connected to each other. (One convenient method is to solder all pickup ground wires, the output jack ground, the pickup selector ground, and the bridge’s ground wire to the back of the volume pot, and then run a jumper wire to ground the treble control. In conventional wiring, all pots must be grounded, but here, it’s not necessary to ground the bass pot.)
The Dobro All-Electric featured a pickup purchased from the fellow who’d invented it in ’32, Arthur J. Stimson of Seattle, Washington (it was not invented by Dobro’s Vic Smith, as has been reported elsewhere). This was, as far as we know, the first modern electric guitar pickup, with the magnet under the pickup, rather than over the strings, as on Electro/Rickenbacker instruments (or the presumed “transducer” on the ’28 Stromberg-Voisinet). Stimson’s pickup had a large horseshoe pickup in the body with two coils, one for bass and one for treble strings, each with its own bar polepiece. A 1/4″ jack outlet sat on the top down near the standard stamped National trapeze tailpiece, next to a single volume control.
At that time European craftsmen operated under the guild system. The guitar (in its modern form) was a relatively new instrument, and most guitar makers were members of the Cabinet Makers’ Guild. The Violin Makers’ Guild claimed exclusive rights to manufacture musical instruments. The Violin Makers’ Guild filed appeals on three occasions – the first in 1806 – to prevent cabinet makers from producing guitars. Johann Martin is mentioned in a surviving submission dated 1832.
The tuner goes first. This one is pretty easy. It doesn’t want to hear an effected signal; it wants to see the direct input from the guitar. Another reason for putting the tuner first is that if you’re using any true-bypass pedals, the TU-3 will give them a buffered signal, which will protect your tone from loss of signal in the cables when other pedals are off. This is another one of the reasons there as so many TU tuners in pedalboards worldwide, even ones using nothing else but boutique true-bypass stompers.

The Boss GT-1000 Guitar Effects Processor is by far the best multi-effects pedal that the team at Boss have ever come up with. This is jam-packed with the entire back catalogue of Boss stomp box effects as well as tones from the coveted "500" series Delay, Modulation and Reverb multi FX pedals. So, you have over 116 types of effects to create music with – making it a no-brainer for Boss fans in general and those who need a huge array of expertly crafted FX.
It all began in California in 1946, when inventor Leo Fender decided he could improve on the hollow-bodied guitars that were popular at the time by introducing the world’s first production solid-bodied electric guitar. Arriving in 1951, the Telecaster soon became a commercial success, shortly followed by the release of the sleek Stratocaster in 1954.
The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
Squier Affinity Telecaster: The Tele features the same tonewoods as the Strat, with a slightly different single-cutaway body style. It also has two pickups instead of three, and a fixed bridge. Single-coil pickups have a thinner sound compared to humbuckers, and it case of the Telcaster they create the signature twang that put the guitar on the map.

Nor were Decca guitars made for or marketed to children. They were made at the same factory that made Teisco, Teisco del Rey, Kingston, Heit, Kawai and other brands of guitars. Some of these are quite decent beginner's instruments, and some are just flat out interesting/weird. No, they're not the same quality of a Gibson, Fender or Burns guitar from the same period, but they also cost a fraction of one of those guitars. And coincidentally, Fender guitars nowadays are largely made in Indonesia, China and Korea, places that *wish* they could make things as well as they can in Japan, so chew on that before you slag on Japanese-made guitars.
Before we go into the parts of an electric guitar, it’s worth noting that there are three different body types: solid body, hollow body, and semi-hollow body. The main difference between them is the way the bodies are constructed, and the amount of resonance they produce. If you’re into punk, rock, metal, or any style of fast or heavy music, then it should be solid body all the way. It allows for louder sounds and more sustain, while avoiding the feedback issues that affect some hollow bodied instruments at higher volumes. The hollow and semi-hollow bodied guitars on the market will appeal to players who prefer softer styles, such as jazz, country and blues, as well as soft rock and pop, as they offer a full, rich and more resonant sound with lots of bass. Beginners will be best off sticking to a solid bodied guitar, as they are easier to handle in most scenarios. For the rest of this anatomical breakdown we’ll focus on solid body guitars.
The music that Jimmy Page made was able to transport you so that you got lost in what he was playing. His solos were show-stopping and so innovative when it came to guitar-playing technique at the time. He set himself the challenge of breaking the preconceptions of what a guitar can do, so his style evolved over time. But he was always one of the greats, even when experimenting!
Kawai Teisco was founded by Atswo Kaneko and Doryu Matsuda. The company also produced the popular Ibanez badge in the 1960s. Kawai Teisco made their own house brands Kawai, Teisco, Del Rey and Teisco Del Rey. Badged guitars produced by the Kawai Teisco factories include Apollo, Aquarius, Arbiter, Atlas, Audition, Avar, Ayar, Barth, Beltone, Black Jack, Cameo, Cipher, Concert, Cougar, Crown, Daimaru, Decca, Diasonic, Domino, Duke, Emperador, Heit Deluxe, Holiday, Imperial, Inter-Mark Cipher, Jedson, Kay, Kent, Kimberly, Kingsley, Kingston, Keefy, Lindell, Marquis, May Queen, Minister, Noble, Prestige, Randall, Recco, Regina, Rexina, Sakai, Satellite, Schaffer, Sekova, Silvertone, Sorrento, Sterling, Swinger, Tele Star, Top Twenty, Victoria, and Winston. Possible badged guitars made by the company include: Astrotone, Demian, G-Holiday, Lafayette, Master, Orange, Tamaki and Trump.
Marshall Chess assembled in his words "the hottest, most avant garde rock guys in Chicago" for the album sessions consisting of Pete Cosey (lead guitar, later with Miles Davis) Phil Upchurch and Roland Faulkner (rhythm guitar), Louis Satterfield (bass) Gene Barge (tenor sax), Charles Stepney (organs) and Morris Jennings (drums). Since Muddy wasn't as accustomed to this style, he only contributed vocals, but he still played an essential part in this recording. Electric Mud (1968) was mostly recorded in live takes with few overdubs and that off-the-cuff live feel that's captured on it makes it stronger. On the opener, "I Just Want To Make Love to You," pounding drums and Cosey firing out raw screaming guitar grabs your ear with Muddy's confident singing pushing the music along. The solo on this song is nothing short of phenomenal. The guitar starts playing some distorted melodic notes then morphs into this gigantic screeching feedback riff becoming louder and wilder then continues to morph from a tearing solo until it reaches this intense mind-bending groove that sounds on the brink of collapse. At this point, the guitar cuts out, leaving you breathless, with just drums and Muddy's voice building up back to the verse, then with an out-of-your-mind guitar and organ playing off each other to the end. The next song, "Hoochie Coochie Man," begins with an incoming guitar sound and has the opposite feel of the last track. Muddy's vocals seemingly come out of the speakers at you as alternating lines come from the left and then right, giving the listener a disorienting acid-like effect. A liquidy sounding guitar that washes over like a wave accompanies the verse and changes into an expressive wah-wah lead on the chorus. There's a great, fun cover of "Let's Spend The Night Together" which the Stones must have taken as a huge compliment, having their idol cover one of their songs. Muddy and the band turn it, around making it appear like he wrote it with a big mean sounding back melody, soulful distorted guitar lines and Muddy's commanding voice sounding the way he might have sung in a club in Chicago. "She's Alright" has a trippy beginning with bass notes fluttering up then swaying back down to open up to smash your head against the wall along with crashing cymbals matched by a dirty guitar that has real spirit to it. The song makes great use of cross-overs with a screeching guitar bouncing back and forth between speakers and then somehow transforms and ends with a pleasant distorted instrumental version of "My Girl." Original material was also written for this record like "Tom Cat" and "Herbert Harper's Free Press News," with the latter as a vaguely topical song about the sixties with lines like "world is moving much too fast" and "where ya gonna run to, where ya gonna hide" and a fuzzed out guitar that parallels the confusion and outrage of the lyrics. "The Same Thing" closes Electric Mud with a slow heavy blues feel to it and a stretched out, aching guitar on top.
The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
Other handheld guitar and bass resonators on the market, manufactured under the tradename SRG, produced by Aescher Europa, in Germany, are available in both monophonic (one note at a time) and polyphonic (multiple notes at once) models, which include multiple onboard trigger switch effects, such as HPF (high pass filter) for enhancing harmonics and producing feedback effects, and LPF (low pass filter), producing a bass boost with a cello sound on heavy gauge strings. Later EBow models, such as the plus Ebow, contain a mode slide switch on the back, which allows the player to either produce just sustain or overtone feedback in addition to sustain.[69]

Russell, George (2001) [1953]. "Chapter 1 The Lydian scale: The seminal source of the principal of tonal gravity". George Russell's Lydian chromatic concept of tonal organization. Volume One: The art and science of tonal gravity (Fourth (Second printing, corrected, 2008) ed.). Brookline, Massachusetts: Concept Publishing Company. pp. 1–9. ISBN 0-9703739-0-2.

We also decided to test a separate group of smaller guitars with scale lengths (the distance from the string nut at the top of the neck to the bridge that supports the strings on the body) in the range of 22 inches, as compared with 24.75 to 25.5 inches for most full-size electric guitars. These models may be more comfortable for kids because their smaller hands won’t have to stretch as far, and many adults also like them because their compact size makes them easier to travel with.
Guitar amplifiers generally incorporate at least a few effects, the most basic being tone controls for bass and treble. There may be some form of "overdrive" control, where the preamplifier's output is increased to the point where the amplitude overloads the input of the power amplifier stage, causing clipping. In the 1970s, as effects pedals proliferated, their sounds were combined with tube amp distortion at lower, more controlled volumes by using power attenuators, such as Tom Scholz's Power Soak, as well as re-amplified dummy loads, such as Eddie Van Halen's use of dummy-load power resistor, post-power-tube effects, and a final solid-state amp driving the guitar speakers.