Another technology that is used in Delay units is a feedback circuit, consisting of a tracking oscillator circuit to hold a note of the last interval, and after amplifying the signal, send it back to the input side of the delay. While it was first associated with Boss DF-2 Super Feedbacker & Distortion, currently, the signal feedback circuit is employed by Delay pedals, and if used under "hold" mode (As in Boss DD-3) it will provide a sustain effect instead of a simply delay effect.
I started using cobalt .010 and I've found they have plenty of clarity and bite. Please keep in mind there are many factors going into your sound. Amp, guitar pickups, strings, pick type, etc. Don't be disappointed if you get some premium strings that don't change your sound if your pickups can't pick up the movement very well. Start at a regular light. .010 is plenty flexible, and they won't break as often as a 8 or 9. Don't get caught up in the rookie mentality of "THIS is what kind of guitarist I will be, so I need everything to fit that." Experiment with different sizes and types.
Bass effects are electronic effects units that are designed for use with the low pitches created by an electric bass or for an upright bass used with a bass amp or PA system. Two examples of bass effects are fuzz bass and bass chorus. Some bass amplifiers have built-in effects, such as overdrive or chorus. Upright bassists in jazz, folk, blues and similar genres may use a bass preamplifier, a small electronic device that matches the impedance between the piezoelectric pickup and the amp or PA system. Bass preamps also allow for the gain of the signal to be boosted or cut. Some models also offer equalization controls, a compressor, and a DI box connection.
Playing the guitar is no joke. To be honest, not all who bought a guitar end up playing. Maybe it’s just hype from friends and family or along the way found something else more interested on. You have to remember that you will spend countless hours practicing and the time you spent to it is impossible for you to get it back. This is not meant to discourage but to challenge you to succeed.
Anyway, this little beast didn’t need much work. This is one of the pleasures of working on a Champ-style practice amp. They have so little in them, there’s simply not much to go wrong or fix. This one, it turned out, only needed a filter cap job, a new preamp tube and one coupling cap. Piece o’ cake. Twenty minutes of soldering and one $4.00 7F7 tube later, I had a monster little Champ-esque amplifier (actually it sounds a little more like the Gibson Skylark than a Champ, but that’s cool by me) for under $80.
Lol I agree I'm a nirvana freak, not a kurt freak.... but dam fender all you can make is the same butt ugly designs that you have made for years come up with a compleatly new body design and I mean COMPLETELY NEW and just use the same components or better for a new guitar called, idk caster lol or DOUCHECASTER lol don't matter to me just hive us something new

Our basic no frills guitar Denny designed to go head to head with $1000+ guitars. Magazine reviews and customer testimonials say it actually outperforms many well known $1500 models. If you want the look, feel and sound of a high dollar acoustic with 50% easier playability this is the best guitar we offer. Shipped wholesale direct from our workshop in Lincoln, Nebraska. 100% money back guarantee, lifetime warranty.
There's no wrong answer to which neck will work best for you. When people speak of rounder vs. flatter being better for chording/bending, they are referring to the radius of the fretboard, not necessarily overall neck shape. The fretboard on all guitars has a curvature across is, from the the treble to the bass side. Generally speaking, most people would agree that rounder fretboards facilitate better chording, while flatter ones facilitate better bending, but even that's not hard and fast.
It has always amused me that one of the great tempests in the teapot of guitardom has been the legendary “lawsuit” of the 1970s. You know, when Norlin (aka Gibson) sued Elger (aka Hoshino, aka Ibanez) in 1977 over trademark infringement based upon “copying” Gibson’s headstock design. There are tons of ironies in this story, but one of the most amusing aspects is that companies such as Gibson have been one of the most egregious copyists of its own guitars over the years. Witness the Korean-made Epiphone Firebird 500 seen here.

{ "thumbImageID": "2017-SG-Faded-HP-Electric-Guitar-Worn-Brown/J46938000002000", "defaultDisplayName": "Gibson 2017 SG Faded HP Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Brown", "sku": "sku:site51500000029961", "price": "1,199.00", "regularPrice": "1,199.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Gibson/2017-SG-Faded-HP-Electric-Guitar-Worn-Brown-1500000029961.gc", "skuImageId": "2017-SG-Faded-HP-Electric-Guitar-Worn-Brown/J46938000002000", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Cherry", "sku": "sku:site51500000029960", "price": "1,199.00", "regularPrice": "1,199.00", "msrpPrice": "1,999.00", "priceVisibility": "1", "skuUrl": "/Gibson/2017-SG-Faded-HP-Electric-Guitar-Worn-Cherry-1500000029960.gc", "skuImageId": "2017-SG-Faded-HP-Electric-Guitar-Worn-Cherry/J46938000001000", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Being part of the Gibson family, Epiphone today makes a variety of officially-sanctioned Gibson classics, including the Les Paul, which comes in versions including the Tribute with authentic Gibson pickups and the Special II with Epiphone's own pickups. There are also Epiphone editions of the timeless Gibson SG, like the G-400 Pro which is available in right or left-handed versions.
Like many others, Reinhold Bogner (born in Ulm, Germany, like the EL84 tube!) started his career with Fender mods. He founded his company in 1989 in Los Angeles and succeeded in earning a reputation among guitar amp manufacturers. His brand became famous with models like the Ecstasy 100A and 100B, where "A" stands for American (with 6L6 tubes) and "B" for British (with EL34 tubes). Among its famous users, you'll find Steve Stevens and Steve Vai (apparently your name must be Steve to be Bogner's friend).
Fender guitars are made either in the United States or Mexico. There is a limited number of guitars being made in Japan, but those are only sold on Japanese domestic market. The difference in quality between the U.S. and Mexican Fenders is obvious but not too great. No matter which one you go for, you will get the same refined tone that made this company famous.

Family Owned and Operated, Lamb's Music has been serving the musical metroplex for over 30 years. Offering warranty on almost every brand of stringed instrument, Lamb's Music has been the go-to spot for repairs and customizations for companies like Guitar Center, Gibson, Gretsch,Taylor Guitars, and Fender Musical Instruments as well as many others.  

Polytone Mega Brute, Jazz guitar amplifier fully functional. Has loads of clean head room but also has 3 settings: Warm, Edge and drive.  I think they’re rated and 65watts, into 8ohm 8” speaker. Super light and portable, approx. 22lbs. Probably from the mid ‘80s production. Hi and low gain inputs, bright switch, effects loop. Spring reverb. Mint condition and everything works like brand new. Shipped to the lower 48 for $50.00. Local pick up would be great. Return if unhappy but ship in same packing and also pay return shipping. Thanks  
Clapton himself has repeatedly called Guy “the greatest living guitarist.” Hendrix literally knelt at Buddy’s feet in the late Sixties, the better to study his riffs. Guy’s secret? He combines an old-time blues feel with the technical facility of a modern guitar player. He was a youngster at the legendary Chess Records in early Sixties Chicago. Fresh up from Lettsworth, Louisiana, Guy was some 20 years junior to giants like Muddy Waters and Howlin’ Wolf, yet old enough and gifted enough to share the studio with them.

• Don’t always blame the frets: Buzzing doesn’t necessarily mean there’s a fret problem. Some guitar players set their bridges for super-low action in their quest for speed, and that can makes frets buzz. For beginners unfamiliar with how accurately tuned strings sound or more experienced players exploring dropped and open tunings for the first time, buzzing can also be a buzz kill. Low tunings like dropped D and open D and open C may prompt guitars with normal action to buzz due to the slack in the strings unless a guitar is set up properly to accommodate such tunings.
I am old enough to remember Kay guitars back in the 70's. And what I remember of playing them is they were poorly put together, poor action (like mile high action), poor sounding pickups etc...They also seemed to always be the guitars that were the cheapest in all the mom n' pop stores, and the ones that were just sold to students, if they were sold at all. In other words,
I have been playing guitar for over 40 years and purchased Taylor's, Gibsons and Fenders as well as many others. This Godin company understands value and passes that along to its customers. Fine tone when played acoustic or threw an amp. The wood tone and workmanship are awesome for this or any price point. You will not be disappointed with this guitar, it is a great value.
Though not much is known about the production of the Hi-Flier after about 1977, it clearly came to an end — and clearly has had an impact on players in the vintage market. Used by guitarists like Cobain and Lee Ranaldo of Sonic Youth, as well as many others in a variety of bands, the Hi-Flier gained notoriety as a unique guitar with a sound as striking as its looks.
5.  Customer installed strap button on heel of acoustic.  This was a simple job that went horribly wrong because a pilot hole wasn’t drilled.  Result:  Cracked heal.  Fix:  Careful application of cyanoacrylate glue and touch up refinish.  I’ve also seen strap button installations on guitars with bolt on necks where the pilot hole has hit the threaded insert in the heel.  Make sure you know where the insert is placed on that particular guitar before you drill.
An excerpt: “Quite a few of the artists I’ve worked with have told me that my own personal style might be described as flashy. In this book, we will definitely cover the hotter aspects of playing, not only regarding lead styles, but rhythm techniques, too. What I’ve found after years of experience in the studio and onstage with many different types of artists is that a guitarist can modify his playing and adapt it to the requirements of the particular situation while still revealing his own distinctive musical personality.”
If you stick to a simple chromatic scale (all the semitones), you also run the risk of the pitch correction moving the audio to the wrong note if the singer is more than half a semitone off pitch. A user scale, containing only the desired notes, generally works much better. Some systems also allow you to dictate the correct notes via MIDI. If the song contains sections in different keys or that use different scales, it is often simplest to split the vocal part across several tracks and then use a different pitch-corrector on every track, each one set to the appropriate scale for the section being processed.
Most of the time, a chord diagram will not show you the finger numbers. They will leave that up to you, because different people sometimes play chords differently. Some people cannot play an A chord like this, because their fingers are too big, and this fingering is very cramped for them. Instead, they play an A with a mini-barre, using the same finger for more frets. For example, I could bar my 1st finger across the 4th, and 3rd strings at the second fret, then place my 2nd finger on the 2nd string, second fret (see image on the left). This gives me more room between the frets, and also frees up my 3rd and fourth fingers to pick out melody and bass notes. It’s just a preference, you can play the chord how you prefer.
Numerous sources, such as Physics by John D. Cutnell and Kenneth W. Johnson, state that the human ear can hear sounds ranging from 20 hertz to 20,000 hertz. A guitar is going to fall in this range because it wouldn’t make good business sense to produce an instrument that can only be heard by dogs. From a scientific perspective, just about everything within the normal human range would be considered effective, since the instrument accomplishes its goal. Beyond that, a researcher wouldn’t be able to designate what’s good.

Featuring a sound engine derived from the bigger, premium-priced GT-100, the GT-1 contains 99 preset and 99 user patches each built from a chain of blocks that can draw from 108 effects, including 27 amp/speaker sims and a 32-second looper. The first two footswitches scroll through patches, while the third (CTL1) footswitch is used to turn an effect, or a combination of effects, on and off in a patch, or for tap tempo. Sonically, there's some great stuff here. Many of the presets are playable straight off the bat, but the wide range of effects means that you can get really creative with your own patches. As you'd expect from Boss, the modulation effects are a highlight, as well as the delays and reverbs, particularly the Tera Echo. We've heard better pitch-shifting though... While the COSM amp sims will give you an approximation of the real thing for recording, at this price, you don't get the playability and detail of high-end modelers. Likewise, the overdrives and distortions work really well when building a patch but, used as solo effects, have less of the impact of real analogue pedals. The acoustic guitar simulator is class, though. For live use, the GT-1 doesn't have the flexibility of bigger units where you can switch individual effects, although you could get 
by in a live situation with careful sequential use of your own patches and the CTL1 button.

I disagree. Through the years I've owned many amps and many pedals, and played with numerous setups to get different sounds. My absolute favorite setup and sound I have had is my Les Paul straight through my JCM900. At most, I'll add a wah in there. That is my ideal setup. I've played many different styles over the years, and used many techniques. My playing has evolved as I went along, and started taking pedals out of the mix. I think pedals are a great thing, and if you want to use them, you should.
Here just in is a well crafted Japanese made Orville by Gibson J200 this is not a Gibson but is a copy of the Gibby by Orville Japan... So this would have been a sanctioned build and not the Lawsuit setting them apart from other makers like Alvarez and Ibanez and Aria and a few others in fact Orville is Mr. Gibson's first name Orville Gibson so This is NOT a Gibson but a very professionally built version of the J200 its an excellent high quality copy Beautifully crafted workmanship and amazing woods... must see... previous owner love this one so much they also had it professionally customized with its Grovers and logo in MOP... plays absolutely excellent with its low easy to play string action, and notice its old Gibson correct bridge with the ABR-1 type adjustable bridge for precise intonation adjustments over the 60's Gibson correct nylon saddles... nice touch... Its spruce top is really nicely grained and figured with beautiful Patina of the real vintage gibby.
Twelve-string guitars produce a brighter and more jangly tone than six-string guitars. They are used by guitarists for chord progressions that require thickening. The twelve-string is mainly used as a rhythm instrument due to the extra effort involved in playing lead guitar using paired strings. Twelve-string guitars have twelve tuning pegs and double truss rods and are slightly more expensive than their corresponding six-string version.
Regarding truss rods, all vintage Martin instruments post-1934 have *non-adustable* truss rods (T rod). This means the neck better be straight, otherwise an expensive repair will be in order. To check neck straightness on a guitar, first tune the guitar to pitch. Then hold the low-E string down at the 1st and 14th frets. Note the distance between the bottom of the low-E string, and the 7th fret. You should be able to put a medium guitar pick in this space. Any more, and the neck is "bowed". Any less, and the neck is "back bowed". Repeat this with the high-E string (the same results should be seen; if not, the neck has a "twist" to it).
Dirk Wacker lives in Germany and is fascinated by anything related to old Fender guitars and amps. He plays country, rockabilly, and surf music in two bands, works regularly as a session musician for a local studio, and writes for several guitar mags. He’s also a hardcore guitar and amp DIY-er who runs an extensive website——on the subject.
The hollow body electric guitar rose to prominence when Gibson introduced the ES-150 back in 1936. Fully hollow body electric guitars (sometimes referred to as “Jazz Box” guitars) tend to have arched tops and large, deep bodies that allow the sound to fully resonate to produce an incredible full-bodied voice with amazing projection and depth. Jazz players and blues players really love the sound fully hollow guitars deliver. While the classic, larger-bodied fully hollow electric guitars definitely still exist, there are also a substantial amount of thinline fully hollow body electric guitars that guitar players may find to be more comfortable. Guitar brands such as Gibson, Gretsch, Ibanez, D’Angelico, Guild, and Epiphone provide guitar players with a fantastic array of fully hollow body electric guitars.