In some small to mid-size venues, such as bars and nightclubs, the PA system may not have the capacity to provide the bass sound for the venue, and the PA system may be used mainly for vocals. Bass players in bands that play at a variety of venues, including these types of small to mid-size venues, may need to be able to provide the bass sound for the venue, and so they will require a large combo amp or bass stack with this capability.

Perhaps the most popular choice though is a paper in oil capacitor. I have tried so many brands and options, and truth be told, it's very hard to notice a substantial difference and you can, unnecessarily spend a lot of money on premium ones. I received so many requests for a PIO equipped harness, so in an effort to try and whittle my findings down to a good value, tight tolerance and good sounding paper in oil capacitor, I've settled with one made by WD Music USA which are superb. Compared to other PIO caps on the market, they're a reasonable price and importantly are tight tolerance meaning the key details about how it will react with a tone pot, is accurately presented. Again, no real right or wrong here, if your budget allows you to go crazy on capacitor choices, no one can tell you not too. But truthfully, just pay attention to the tolerances, as that will tell you the most about how it will 'sound'. 


The Epiphone Broadway is a hollow body archtop guitar that has been in the Epiphone guitar lineup since 1931. The Broadway was initially an acoustic archtop, but after Gibson took over Epiphone in 1957 the “Broadway” designation was given to a new electric archtop. The electric model was reissued in 1997 and continues to be in production, and we’ve selected it for this list of best electric guitars.
I'm sorry to disagree Merlin, but the woods used really do make a big difference to the sound of a solid body guitar. Both the neck and body are resonators, the string energy drives the woods which damp some frequencies and use that energy to emphasise the resonant frequencies. That drives the string's vibration through the bridge/nut/fretboard. It's a feedback loop.

Basic Guitar chords and signatures. Find and save list of chords. Basic guitar chords A sheet of the most used rock chords. Suitable for beginners. Empty chord sheet All about how to play guitar chords and guitar chord charts. Once you finished the free online guitar lessons you know all there is to know about guitar. Music guitar tabs archive with over guitar chords for guitar, keyboard, banjo and viola, tabs for guitar, bass, drums, guitar note


A wah-wah pedal is a moving bandpass filter whose frequency center is controlled by the musician via a rocker pedal. This filter boosts the frequencies in the instrument signal around the moving frequency center, allowing the musician to emphasize different areas of the frequency spectrum while playing. Rocked to the bass end of the spectrum, a wah-wah pedal makes a guitar signal sound hollow, without upper harmonics. On the other end of the sweep, the filter emphasizes higher-end harmonics and omits some of the low-end "growl" of the natural instrument sound. Rocking the pedal while holding a note creates a sound that goes from growl to shriek, and sounds like a crying baby, which is how the effect got its name and also the reason behind the Crybaby line of wah-wah pedals. The wah-wah pedal, used with guitar, is most associated with 1960s psychedelic rock and 1970s funk. During this period wah-wah pedals often incorporated a fuzzbox to process the sound before the wah-wah circuit, the combination producing a dramatic effect known as fuzz-wah.

I think Washburn is one of the best out there, From their A series, to HM to x series they all rock. I've had a a-10 since 1980 and it plays great! I have also got the reissues still great quality over the years. The only issue I've seen is Washburn's commitment to catch/keep some artist. Either they can't keep um or they don't want to. Can't see it being the later. Its very difficult to try one of their pieces out as their are very few stores that even stock them. In the 80's early 90s they were everywhere, now?
New in ’64 were the TG-64 (named for the year) and a matching series of solid basses. The TG-64 was essentially a Fender Jazzmaster shape with a slightly extended bass horn, the new, hooked four-and-two headstock (usually with a metal plate on the front), and best of all, our old friend the “monkey grip” handle in the lower bass bout, handed down from the old T-60. The pickguard was two-part, with one large piece under the strings and a little extension on the lower bout for knobs and jack. These had three single-coil pickups, usually the chunky, metal-covered kind with a black insert and exposed poles, although some have smaller oval metal covers with exposed poles, all controlled by three on/off rocker switches above the strings. A small sliding switch served as a rhythm mute, or lead boost, depending on your point of view.
Adjusting saddle height couldn’t be easier on a Les Paul. Since the bridge can only be adjusted at each end, there is no need to adjust each saddle individually. Firstly check and, if necessary, adjust the low (thick) E string height. Do this by adjusting the height of the bridge at the thick E string end. This is done by rotating the thumbwheel anti-clockwise (counter-clockwise) to raise the bridge or clockwise to lower it. You might be able to do this with just your fingers, but chances are you will need to use pliers. Be careful if you use a tool as it is easy to slip and damage the finish on your guitar. Alternatively you can slacken all of the strings and use your fingers, although this is a very time-consuming process. Finger method
I took lessons with him when i was 8 years old. I stopped taking lessons when i was 12 years old. In those four years i have learned so much about guitar in such a little time. Patrick is an amazing teacher and by the time i left his teaching, i joined 4 bands and played at the whiskey twice, the house of blues four times, and the grove once. All amazing experiences and it all started from Patrick. I am 16 now and i will never forget what he has done for me. If you are thinking about eventually taking on guitar at all, Pat is your man.
Marshall Chess assembled in his words "the hottest, most avant garde rock guys in Chicago" for the album sessions consisting of Pete Cosey (lead guitar, later with Miles Davis) Phil Upchurch and Roland Faulkner (rhythm guitar), Louis Satterfield (bass) Gene Barge (tenor sax), Charles Stepney (organs) and Morris Jennings (drums). Since Muddy wasn't as accustomed to this style, he only contributed vocals, but he still played an essential part in this recording. Electric Mud (1968) was mostly recorded in live takes with few overdubs and that off-the-cuff live feel that's captured on it makes it stronger. On the opener, "I Just Want To Make Love to You," pounding drums and Cosey firing out raw screaming guitar grabs your ear with Muddy's confident singing pushing the music along. The solo on this song is nothing short of phenomenal. The guitar starts playing some distorted melodic notes then morphs into this gigantic screeching feedback riff becoming louder and wilder then continues to morph from a tearing solo until it reaches this intense mind-bending groove that sounds on the brink of collapse. At this point, the guitar cuts out, leaving you breathless, with just drums and Muddy's voice building up back to the verse, then with an out-of-your-mind guitar and organ playing off each other to the end. The next song, "Hoochie Coochie Man," begins with an incoming guitar sound and has the opposite feel of the last track. Muddy's vocals seemingly come out of the speakers at you as alternating lines come from the left and then right, giving the listener a disorienting acid-like effect. A liquidy sounding guitar that washes over like a wave accompanies the verse and changes into an expressive wah-wah lead on the chorus. There's a great, fun cover of "Let's Spend The Night Together" which the Stones must have taken as a huge compliment, having their idol cover one of their songs. Muddy and the band turn it, around making it appear like he wrote it with a big mean sounding back melody, soulful distorted guitar lines and Muddy's commanding voice sounding the way he might have sung in a club in Chicago. "She's Alright" has a trippy beginning with bass notes fluttering up then swaying back down to open up to smash your head against the wall along with crashing cymbals matched by a dirty guitar that has real spirit to it. The song makes great use of cross-overs with a screeching guitar bouncing back and forth between speakers and then somehow transforms and ends with a pleasant distorted instrumental version of "My Girl." Original material was also written for this record like "Tom Cat" and "Herbert Harper's Free Press News," with the latter as a vaguely topical song about the sixties with lines like "world is moving much too fast" and "where ya gonna run to, where ya gonna hide" and a fuzzed out guitar that parallels the confusion and outrage of the lyrics. "The Same Thing" closes Electric Mud with a slow heavy blues feel to it and a stretched out, aching guitar on top.
Heritage Guitars, founded in 1985 by four long-time Gibson employees when Gibson relocated to Nashville, continues to build guitars in the original factory at 225 Parsons Street inKalamazoo, Michigan. Many of their models evoke memories of Gibson’s late-1950s/early-1960s “golden years.” The H-150 and H-157 are reminiscent of the original Les Paul and Les Paul Custom, while the H-535 is a modern version of the Gibson ES-335.
Music man make the best regular production (i.E. non custom shop) guitars on the planet. Nobody else comes close. This is the quality that everybody else should be reaching for. The fit and finish and playing comfort are second to none. And the oil finish on the necks is to die for! These guys don't just churn out minor variations on the same 60-year old theme, they actually innovate, they challenge, they dare. Wonderful new designs, made for real players. The results are outstanding. Roasted maple and all-rosewood necks, new chambering and tonewood construction ideas. They are so far ahead of the game it makes you wonder why the rest of the industry stays so stagnant. Music Man are the only guitars I will buy now. I'm so proud to support them!

Guitar-Sunbeam : Precisely transmits the eternal electric guitar, ideally suited for modern production. It combines an extensive library of strum patterns, brute force, arpeggios and real riffs with real-time performance monitoring. An innovative playback engine allows you to create an almost infinite number of variations of chords and you get convincing, musical results.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: victoria","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"victoria","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}

If you want to measure the fret size on existing instruments, a good way to do it is to get an inexpensive dial caliper (think Harbor Freight etc).  You can measure the width with the outer jaws (make sure to zero out the calipers for accurate measurements), but for the height (unless you are going to notch the depth rod and subtract the difference), use a piece of something of a uniform thickness and drill a hole in it to accomodate the depth rod, place it across two frets and measure thru the hole (usually near the crown) to the fingerboard and subtract your piece's thickness.  When measuring fret height, it is always good to measure a few different places on the neck as the height may vary according to leveling and wear. On many guitars (but not all) the upper frets (if there is not a neck joint area hump that was accounting for during leveling) will be a good indicator of fret height.
I sold my Yamaha Pacifica 12 and have been trying to find out more about the Italia Rimini 12, the Schecter TSH-12 Classic(which is the new version and I only saw 2 -both sold) and the Eastwood Sidejack 12. I have the money, but finding anything but the Eastwood online, is rather difficult. I still would like to try them out before buying, if I could.
The exciting thing about the Kemper is that you can use it to capture the sound of your JTM45, right where it hits that sweet spot, with the microphone you prefer and that mic preamp that just adds a certain something. Then you can refine the 'profile' you've made while A/B-ing the digital signal with the original using the Kemper's onboard EQ, and save the sound alongside the library of 200 or so profiles that comes pre-loaded, with access to hundreds more via the Rig Exchange section of the Kemper website. If you fancy a little more spice you can clean up or crank the KPA's onboard gain control to go way beyond the level of drive available on your original amp, adjust sag, tweak the audible effects of pick attack and even, thanks to what Kemper claims is "digital alchemy", alter the size of your virtual cabinet from a huge stack right down to a cigarette packet, while there's also a fully loaded set of effects. We've heard various approaches to digital modelling sound good in the studio before but this is as close to a 'real' mic'd valve amp sound as to be indistinguishable. If you're the type of guitarist who records regularly, or a producer who wants 24/7 access to a personal library of refined and tested guitar sounds wherever you happen to be on the planet at any given time, the Kemper Profiling Amp is the product of the decade so far.

Most players dream of having comfortable, smooth action on a guitar. With the PLEK, the most optimal string action possible for any instrument can be realized. This gives the individual musician an instrument that plays exactly the way he has dreamed of. Optimal playability on a guitar makes it sounds better with notes that ring true and clean. There is no fret buzz under normal playing conditions and the intonation problems that occur because of high string action, are eliminated. You can hear and feel the difference.
Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.
Its the type of clipping you would expect to hear from a tube amp that been naturally gained up by cranking the volume levels really high.  Some players refer to this sound as Crunch.  These Overdrive pedals, such as the famous Ibanez Tube Screamer, can also be doubled up to give two gain stages:  Slight Crunch and Creamy Velvet Lead.  They sound as good as they might taste, if they were flavors of cereal or ice cream.  Many players found their tone by using two overdrive pedals back to back.
Sensitivity: Valve amplifiers (current drive) are sensitive to crossover resonances and speaker impedance variations. Quality speaker systems often used passive crossovers that were second-order, constant impedance, and critically aligned to avoid resonant effects. Some quality speakers had copper caped pole pieces, which helped damp impedance variations. Note:- With solid-state amps in voltage drive, power decreases as the speaker impedance rises. With valve amps in current drive, power increases as the speaker impedance rises. Therefore a flat speaker impedance is synonymous with a flat frequency response.
Jump up ^ DeCurtis, Anthony (1992). Present Tense: Rock & Roll and Culture (4. print. ed.). Durham, N.C.: Duke University Press. ISBN 0822312654. His first venture, the Phillips label, issued only one known release, and it was one of the loudest, most overdriven, and distorted guitar stomps ever recorded, "Boogie in the Park" by Memphis one-man-band Joe Hill Louis, who cranked his guitar while sitting and banging at a rudimentary drum kit.
Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-...  Click To Read More About This Product
In 2013 Vox released updated "G2" versions of the 15 watt and 50 watt heads, and added a combo version of the NT15H-G2 called the NT15C1. Compared to the original NT15H, the NT15H-G2 adds a foot-switchable Girth channel (which first appeared on the original NT50H) with an additional 12AX7 in the preamp section, a "Dark" switch, a digital reverb, and an effects loop. However, Vox did not retain the pentode/triode output section modes from the "G1" version that allowed for full or half power operation as well as a broader tonal palette. The NT50H-G2 differs from the original NT50H with the additions of an XLR D.I. out and a digital reverb, and the deletions of one 12AX7 preamp tube and the "Tight" switch. It also appears the FX loop is no longer bypassable. Gone is the bright chrome look of the "G1" models as both heads received new cosmetics in the form of a black mirror finish on the tube cage and a new suitcase-type handle. Vox also released "G2" versions of their matching cabs: the V112NT-G2 (one Celestion G12M Greenback speaker), and the V212NT-G2 (two Celestion G12H 70th anniversary model speakers), each also sporting the suitcase-type handle. The new NT15C1 combo combines an NT15H-G2 chassis with a single 16Ω 12” Celestion G12M Greenback speaker in a black tolex cabinet with a suitcase-type handle.
Johnny Thunders’ snot-nosed New York take on Keith Richards’ cool is one of the pillars on which punk rock was built. An Italian-American guy (birth name John Anthony Genzale Jr.) from Queens, he was born a little too late to be part of the Sixties rock explosion. But the bands of that era were his influences, and he put his own spin on them in the early Seventies as the New York Dolls came together with Thunders on lead guitar.
I moved permanently to Brazil from the USA. I brought an acoustic in a typical acoustic case. I had a vintage VOX v241 Bulldog in it’s original wood case. They both survived the counter check-in and belly load of the airplanes and transfers. My VOX Pathfinder amp was in a footlocker with other thing and made it just fine also. Yes, the plugs and voltage differences are a problem. I need to use a voltage transformer to change the 220v to 110v. I wouldn’t worry too much about shipping a Fender style guitar but any guitar with with a Gibson style neck I would worry about and want the best specialty travel guitar case I could find.
For better or worse, by 1982 the taste for natural-finished, neck-through guitars with lots of switches and active electronics had begun to move on. On the horizon were the brief affair with weird-shaped “heavy metal” guitars and the impending first Strat-mania and the rise of Superstrats which would pretty much define the remainder of the decade. 1982, and the 18 and 28 Series, marked the end of Martin’s direct manufacture of electric solidbody guitars.
The sound blew away guitarists when units first popped up in guitar stores. If the dizzying harmonic swirl didn’t just make you puke, it really sent you tripping. Interestingly, many tired of it a lot quicker than they did the phaser’s subtler, less imposing “swoosh”, and consequently it’s difficult today to name a fraction as many great guitar tracks with flangers slapped all over them as with phasers. For the latter, we’ve got the Stones’s “Shattered” (or just about anything from Some Girls), the Clash’s “Lost in the Supermarket” from London Calling and loads from Sandinista, and heavier rockers from early Van Halen to recent Foo Fighters. In the flanging corner, we’ve got The Pat Travers Band’s “Boom Boom, Out Go The Lights” and… well, I’m sure there’s another somewhere. Okay, maybe the intro lick to Heart’s “Barracuda” redeems it some.
Taming loud guitar playing isn’t the only reason to grab a mini amp, though. These also come in handy when traveling. Sure, you could bring along your acoustic guitar, but that will still make a fair amount of noise in your hotel room, and playing more quietly is less fun. With a mini amp, you can strum as hard as you want to and still control the volume. Many are also small enough to fit inside carry-ons without reducing the space you need for food, a travel pillow, and a good book.
It is a standard dreadnought with 26 frets. There are no electronics, no cutaway, and no fancy upgrades. It has a book matched sitka spruce top, rosewood fingerboard, adjustable rosewood bridge, cream colored plastic binding, rosewood back and sides, and a black inlaid headstock. The neck is not one piece and is made from presumably African mahogany. It has closed gold tone tuners, black beveled pick guard and some plain black line art for a rosette. This guitar is void of polyurethane and has a lacquer finish, so much the better.
This is a fantastic tool for acoustic solos artists, worship leaders, session players or an acoustic rig that lacks a lot of control or a preamp source. Moreover, the Venue provides the additional functionality of tuning, feedback control, an effects loop and a built in DI box. Its price is usually on the higher end, though you can check used pricing which often dips significantly below retail. However, buying a preamp, tuner, noise gate and DI box separately would run you a lot more than what the Venue costs.
This list is an amateurish joke. Many guitars listed are pure cheap junk I'd toss in the garbage even if they were free. Take it from a 45-year Pro, Parker & PRS are the 2 highest quality. Fender, Ric and Gibson, along w/ brands that have stood the test of time, plus a few hand-made (custom) brands are the only ones you can seriously depend on. The rest are mostly pathetic attempts at copying a major brand and cutting the price by REALLY cutting back on quality. As they say: "You get what you pay for. "
A soldering iron is basically a tool that allows you to transfer heat that in turn melts the solder which is used to join two pieces of metal. The heat is supplied electrically (this wasn’t always the case) and the soldering iron itself will have an insulated handle protecting you from the heat generated. For some useful tips on best practice for soldering click here: https://guitarkitworld.com/common-mistakes-to-avoid-when-building-an-electric-guitar-kit/

I would call it waistful or just plain ignorant to buy a $3000 guitar if your learning. Unless your actually a musician, buy yourself a decent$200 fender or whatever it may be and learn on that. Theres not that much diferrence if any at all, at least to someoe who doesnt know how to play yet. If youve got it like that do yourself a favor, buy a $3000 dollar guitarand whn you give up on it like most do in two or three months, find someone who actually plays and can appreciate a guitar of that quality and make his day and give it to someone deserving.
The ‘boomer’ kids wanted their own voice and opinions to be heard, they wanted to be taken seriously – and like the quote from the 1966 film ‘The Wild Angels’ which exaggerated this rebellious angst to the extreme “…We wanna to be free to do what we wanna do…”  There was a sense of needing to rebel against ‘The Man’ – basically anyone who told them what to do or how to conform to society respectfully.
It's like saying the wood handle of a hammer effects the tone generated by hitting a nail. The nails been hit, vibrations through the wood afterward are pointless. Unless the guitar itself is metal and hollow, you would hear sound generated acoustically, as you would with any acoustic instrument. An electric guitar is not an acoustic instrument in a classical sense.
There are different types of delay – digital, analogue and tape. Analogue and tape delays behave similarly. As each echo repeats, the sounds slightly distort which can be pleasing particularly for electric guitar. If you want cleaner repeats, go digital. Tip; if you are using it for acoustic, try the pedal set on a high number of repeats before you buy and check the sound quality. Some cheaper digital units can sound ‘grainy’ after a few repeats with an acoustic.
Archives of the best free VST plugins (electric guitar and acoustic guitar plug-ins) for download. We have created audio / video demos for the most of VST plugins so that you can hear how they sound before you decide to download them. You don't have to register for download. The most of VST plugins in our archives are provided with a link to VST plugin developer so that you can donate to the author if you wish.
Fender-type switches are, obviously, found in Fender guitars but are easily available so could find their way into any guitar, most likely Strat-type guitars. Import-type switches are often found in other makes like Ibanez and on replacement pickguard assemblies. If you have a look at my HSH wiring page and scroll down you’ll see I have an import switch in my Godin SD.
As this site was founded by one of the circuit board designers from GuitarPCB.com, you can be assured that all of the homework has been done for you in selecting the appropriate parts for each circuit. Many of the kits we sell are not available from any other US supplier. Currently, we only ship to the USA, however, we plan to expand to the rest of North America in the future.

The size and power rating of the amp, as well as the size and type of the speakers within the cabinet, will have a significant impact on the recorded sound. Obviously, huge stacks will produce a very different sound from small combos. That said, many recording engineers have found that a small, low-powered amp cranked right up can sound more exciting than a big powerhouse. Even cheap transistor amps with tiny speakers can sound great in the right context. Don’t be precious and don’t rule anything out; it’s all about the end result!
An additional note on the methods used; although we gathered rating and review data from guitarists around the world, we only considered brands that can be found at major online music gear retailers located in the United States. This means that fine brands like Maton from Australia (played by Tommy Emmanuel) weren't included - the same goes for some respected European brands. Also, only full sized guitars, or ones very close to it, were included in the data set - had we included smaller parlor guitars then this may have boosted Martin and also Gretsch might have made the list.
After you've made your selections from the best selection of guitar and bass tabs, you'll want to download the Musicnotes.com apps for your Android, iPad, iPhone, or other device to gain access to your digital library anywhere. The option to print the file is still available, and you will also have all of your sheet music stored in your personal account to access your digital file from any computer or mobile device. If any issues arise, make sure to contact our customer support of musicians, ready to help fellow musicians.
Blend potentiometers (essentially two potentiometers ganged on the same shaft) allow blending together two pickups in varying degrees. The operation is the same as in a balance control found in stereo equipment – in the middle position (often marked with a detent) both pickups supply their full output, and turning the pot in either direction gradually attenuates one of the pickups while leaving the other at full output.[13][29]

Not nearly as popular as single-coils and humbuckers, piezo pickups can be found on electric guitars as well. These crystalline sensors are usually embedded in the saddle of an electric guitar. Piezo sensors operate on mechanical vibration as opposed to magnets to convert sound from vibrating strings into an electric current. Piezo pickups can be used to trigger synthesizer or digital sounds much like an electronic keyboard. Most often, piezo pickups on an electric guitar are used to simulate an acoustic guitar tone. Piezo-equipped guitars often also include magnetic pickups to expand their tonal versatility.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black

A plucked string has many modes of vibration which all occur simultaneously; most of these correspond to overtones or harmonics of the fundamental frequency of the vibrating string. Near the center of the string, the fundamental frequency has the largest amplitude; a pickup at 1/4 of the length of the string will be at the point of maximum amplitude of the second harmonic and at a null point for the fourth harmonic. This position gives a strong, full, mellow tone. A pickup at 1/8 of the length of the string (closer to the bridge) will be at the point of maximum amplitude of the third harmonic, and will also get a lot of the fourth and fifth harmonics. This gives a much brighter tone. The change in tone caused by plucking the string close to the neck versus close to the bridge is based on the same idea: bringing out the harmonics in the string in different proportions. See link to a related article, below.


A second common problem we encounter is a poor mechanical connection. When inserting a cord into a jack, the click you feel is the tip of the cord seating against the metal prong on the end of the jack. With use this prong may spread outward and loose a bit of it's tension. A gentle bend of the prong may be just enough to create a solid connection, however, metal fatigue can dictate the need to replace.
With this high availability I can immediately check back with the program if I am unsure whether I am getting it right when practicing. I can play along to the backing track while practicing and I can continue with new material if I feel that I am ready to do so. All of this is simply not possible with a local instructor on a 30 minute per week basis.
The first effect in our signal chain is a pedal wah. A wah is an effect known as a filter that alters the basic tone of the guitar. When you push the pedal fully forward, the filter brightens up your guitar tone and you bring back the pedal your guitar tone gets darker. For the most variety of sound, you want all the other effects to have a shot at the sound from the Wah so the ME-80 places it as close to the guitar as possible.
If you want to spring for a pedalboard and processor combo that offers multiple effects in one unit, you might want to check out something like the HeadRush Pedalboard with Guitar Amplifier and Effects Modeling Processor. It offers 33 amplifier models, 15 cabinet models, 10 microphone models, 42 effects, and includes an expression pedal, 7" touchscreen, 12 foot switches with OLED Screens, and more.
Gretsch re-emerges with this awesome rex acoustic-like electric guitar that defines quality and perfection in terms of style and elegance. Te Jim Dandy Flat Top G9500 is one of the Gretsch best electric guitars which effectively brings back the quality and sound that characterize one of their most famous guitars throughout the 30’s, 40’s and the 50’s era.

I have an old 1964 60watt Australian Goldentone which I love and will keep. Had a Marshall 800 Lead at one time (head and quad box) when I was in a band but let that go when I stopped gigging. I tried a 50W ENGL combo as I was looking for an amp that was easier to cart around than my old Goldentone and I was blown away with the sound and the build quality. The ENGL should be in the top ten.
Continuing to look at the well-known Fender brand, the Stratocaster American Standard is a higher-priced option with necessary features for the seasoned guitarist. This is another one of the most popular electric guitars ever. In terms of build, the body is a mix of ash and alder, creating a balanced tone for both the sharpness of the upper range chords and the dense resonance of the lower range progressions. The modern bridge has an upgrade of utilizing a block infused with copper and steel saddles for strong intonation and an ease in adjusting pitch. The tuners are placed at varying degrees and heights, with this staggered design creating a decreased in reverberation and excess hum so as to focus in on the clarity of the sound. This electric guitar also has a custom designed single-coil strat known as the “Fat ‘50s”, which is intended to create a fuller sound compared to other guitars. With a comfortable ‘C’ shaped design and durable finish, this 22 fret guitar offers desirable features for the guitar enthusiast. If you’re unsure whether to grab this or our previous Fender pick, read this Telecaster vs. Stratocaster sound article for some more info.
Residing between your guitar and your amp, your effects pedals make it possible to change up your sound between songs or even verses. A pedalboard makes it easier to manage and transport all those stompboxes. The longer your effects chain, the more helpful a pedalboard becomes. Keeping all your pedals in one place, a pedalboard helps you stay organized and keeps your effects layout consistent.
From what I've been able to find out (as a proud owner of a mint W-415 'Dove' model acoustic), Lyle guitars are actually Gibson seconds, that for whatever reason didn't pass muster to be sold as a Gibson (bad finish, scuff, imperfection in the wood, etc.). The Lyle company was out of Portland, OR (I believe) and was started by former Gibson employees who would fix the flawed Gibsons and resell them under the Lyle name. Made in Japan was because Gibsons were made in Japan at the time(?). A damn fine instrument; considered rare now, I guess. I don't ever want to get rid of mine!

On the other hand, if you do decide to stick with it, having a good guitar means you won't have to worry about upgrading in the foreseeable future when your skill levels rise above the problems associated with cheap options.  Realistically, no matter who you are or are buying for, you shouldn't get the cheapest option.  At least go middle-tier unless we're talking about a 5 or 6 year old's first guitar.


Bill Collings dropped out of medical school in the early 1970s[3] and instead worked in a machine shop for five years.[4] At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.
What's funny is that guitars with cheap pickups very often sound better direct than guitars with "good pickups". I have an Epiphone Special I with ( presumably GFS ) P90-style pickups and that thing sounds great direct. It's also fine with a band thru an amp if the band doesn't play too loud - if the band's too loud the low mid buildup means you gotta EQ a lotta bass out and it loses it's girth.
Jackson is regarded as a manufacturer of electric guitars and electric bass guitars, which was founded in 1980 by Grover Jackson. Their headquarters located in Scottsdale, Arizona, USA. They manufacture trendy and stylish guitars. Most of the music players choose a Jackson’s guitar for good performance. It is very apt for sharp and clear music. The price range starts from Rs. 13,380/- onwards (approx). For further details, visit jacksonguitars.com.

As the market for iOS devices and apps has grown, so has the availability of affordable stompboxes and processors that can store downloaded effects. Being able to sample, purchase, and download effects through an iOS app or digital download gives you access to a whole new palette of sounds. Though relatively new, in years to come this may well become the way in which most players will assemble their effects libraries.


Most new electric guitars tend to ship pre-strung with "super light" guitar strings. Depending on your technique, and the style of music you play, that string gauge may or may not be too light for you. The following is a list of the standard string gauges included with each set of electric guitar strings. Note though that different manufacturers include slightly different string gauges in their sets of strings.
From rock to jazz or folk to metal, what separates the great guitarists from the rest is their mastery of the skills taught in this program. From basics like chords and scales to nuances like improvisation techniques, form, control, and inflexion, this certificate program will take your guitar playing to the next level. Few accomplished guitarists have reached their peak alone, and Berklee’s faculty is unparalleled when it comes to delivering the personalized instruction and feedback that will help you turn the fretboard into a playground packed with unlimited possibilities.
Power-tube distortion is required for amp sounds in some genres. In a standard master-volume guitar amp, as the amp's final or master volume is increased beyond the full power of the amplifier, power tube distortion is produced. The "power soak" approach places the attenuation between the power tubes and the guitar speaker. In the re-amped or "dummy load" approach, the tube power amp drives a mostly resistive dummy load while an additional low power amp drives the guitar speaker. In the isolation box approach, the guitar amplifier is used with a guitar speaker in a separate cabinet. A soundproofed isolation cabinet, isolation box, isolation booth, or isolation room can be used.
The least expensive practice amps and basic combo amps may only have a single indicator light: an LED to indicate when the amp's power is on. More expensive amps may also have LEDs to indicate when the preamp has a signal present from the instrument (helpful for troubleshooting during set-up, because if the amp is not producing any bass sound even when the bassist is playing, and the "signal present" light is illuminated, this indicates that a signal is reaching the amp); when a limiter or similar speaker protection feature is activated (e.g., Peavey's DDT system); when clipping is occurring; or when the amp is in standby mode. Amps with a built-in tuner typically have several LEDs to indicate when the note being played is flat, sharp, or in tune.
If you just want one or two instruments from a large SoundFont then follow this procedure.  Open the large multi-instrument SoundFont in Polyphone, then select File, New, Name the new SoundFont.  Go to the Presets of the original SoundFont, Left-Click the Preset you want and then holding down the Left mouse button then drag it to the Presets of the new SoundFont and let go of the button (the preset is now inside your new SoundFont).  Right-Click on the main heading of the original SoundFont and choose Close File.  Now simply choose File, Save (or Save As), Close.
There aren’t a lot of professional reviews of inexpensive amps, but James at Guitar Verdict raved about the Champion 20, saying, “For an amp of this price, the Fender Champion 20 watt offers a massive amount of value,” and calling it “a hard to beat offering.” At last count it had earned an average of 4.6 out of 5 stars in 595 Amazon user reviews and earned an A for review integrity from FakeSpot.
Where you let the overdrive or distortion fill out the tone generated by only three notes. Mess around with different pairs of notes and you'll soon find what sounds good with distortion and what sounds harsh and dissonant. A simple root fifth octave triad is the bread and butter of overdrive and distortion playing. Sometimes if you have a lot of gain on a hot distortion setup you may need to roll off the highs a bit as the high end harmonics can get a bit too brassy on top and harsh on your ears. Have a blast.
Guitarists don’t have to just look on in envy as pianists lead the holiday sing-a-longs this Christmas. Our selection of holiday Guitar Tabs include traditional classics we all love like “O Holy Night” and “Carol of the Bells” and the pop favorites that just wouldn’t be the same without a guitar, like “Jingle Bell Rock” and “Happy Xmas (War is Over)” by John Lennon. But if you just can’t get enough of those traditional Christmas classics, you can pick up our collection of ’Christmas Favorites for Guitar.’
There are different ways to play electric guitar. One is to just play the electric guitar, and to take it as it is. Another way is to play the guitar as a sort of synthesizer. With the right effects (delay, reverb, volume swells, added octaves), no one would even know that it was a guitar. Neither way is wrong, but we refer to both as "playing electric guitar" even though they're being used in completely different ways that may as well be different instruments. Drama ensues.
The one-string guitar is also known as the Unitar. Although rare, the one-string guitar is sometimes heard, particularly in Delta blues, where improvised folk instruments were popular in the 1930s and 1940s. Eddie "One String" Jones had some regional success.[citation needed] Mississippi blues musician Lonnie Pitchford played a similar, homemade instrument. In a more contemporary style, Little Willie Joe, the inventor of the Unitar, had a rhythm and blues instrumental hit in the 1950s with "Twitchy", recorded with the Rene Hall Orchestra.
For many engineers, a simple one-mic technique gives them all the recorded electric guitar sound they need. Dynamic types, such as the ubiquitous Shure SM57, are ideal for capturing loud sounds, as they can handle high SPLs. For a more accurate representation of the amplifier as the human ear hears it in the room, a condenser or ribbon mic can be employed, although care must be taken not to damage the mic with very loud signals. Pointing the mic at the centre of the speaker cone produces the brightest sound, with the sound becoming increasingly warm the further off-centre it’s placed. It’s common to position the mic quite close to the speaker grille, unless a degree of room sound is desired. A good starting point is to place the mic just off-centre, at a distance of between two and six inches.
Neck of the guitar is bolt-on made from maple with a scarf joint for an angled back headstock. Which in turn increases the tension behind the nut eliminating the need for string trees or string retainer bars. Also on the neck are 24 jumbo frets placed on a rosewood fingerboard garnish by sharks fin inlays for the looks and performance of the guitar.

My first electric was one of these (1962, I was 14) . My mother bought it by mail order, probably from the Bell's catalogue. I remember coming home from school every day for what seemed like weeks hoping it had arrived! It was very crudely made with a plywood body (mine was in a red finish). The neck was wide and flat (think that was ply too!) and the action appalling! I remember the original strings were copper wound and left you with green fingertips! I remember the price was around 14 pounds, quite a lot at the time! Even at that age I wasn't impressed for long and soon traded it in for a Hofner Clubman. Wish I still had it now though!

The other US-based manufacturers were from Chicago Harmony (formerly owned by Sears), National-Dobro (Supro/Valco) and Kay. Chicago was the largest guitar manufacturing area of the US at the time. The only other manufacturer of Silvertones during this period was the Japanese-based company, Teisco (or Teisco Del Ray as it was formerly called). Teisco created some of the wildest designs for Silvertones, in our opinion. The earliest model was the TG1. This was the first guitar to incorporate an amplifier and speaker into the body of the guitar. Although some people look down on the Japanese guitars we think they've got some really interesting sounds and innovations not found on American made guitars.
For a long time Yamaha were regarded as one of the best producers of student guitars but their reputation didn't go far beyond that. And it's true that they make excellent guitars for beginners, I am one of the many who originally learned to play on their student nylon string C40. BTW I'm one of those guitarists who thoroughly recommend initially learning to play on a nylon string guitar.
I purchased my Dove in 1989 in a mom and pop kind of music store in North GA , actually Cumming GA. I have played it ever since and I have owned many other guitars in my 52 Years in the music business but it has always been my come back acoustic for the sound and playability of the neck slim D stile ,but the sound quality is very much as good as any lots more expensive guitars,the way it holds the overtone of the note long after you play the note in the body is just unbelievable ,my hat's off to which either company wants to claim they built it I am just glad they did!! Damn fine Guitar.Thanks,Victor
Among the popular performers of Hawaiian (and most other types of) music on the Vaudeville music hall circuit was Roy Smeck (1900-1994). Smeck was a talented instrumentalist who played guitar, banjo, ukulele, and lap steel guitar, earning the sobriquet “Wizard of the Strings.” Smeck made quite a few recordings and starred in part of the first “sound on disk” movie that was released in 1926. Like many other performers, Smeck endorsed a number of instruments by various manufacturers over the years, but is probably best known for the line of Harmonies introduced in 1927 with the pear-shaped Vita-Uke. Smeck’s name would be associated with Harmony instruments until near the end of the company’s run in 1973.

The fretted instrument market is in many ways an excellent leading edge indicator of world economic conditions as a whole. China is not only rapidly advancing in the fretted instrument market but in all areas of manufacturing. Furniture factories in North Carolina are closing due to competition with imported Chinese products of equal quality for far less money. Numerous other industries are moving offshore. As you have all noticed the price of gasoline has risen dramatically in recent months. It should be noted that China now consumes approximately an equal amount of petroleum to Japan. This was certainly not the case five years ago. If OPEC and other producers pump the same amount of oil as they used to, but China emerges as a new player consuming this much fuel, it should come as no surprise that prices will go up. China now is a major importer of fuel, wood and agricultural products. Commodity prices in general are rapidly rising. China is not only becoming a world leader in manufacturing but it is becoming one of the world's leading consumers of all sorts of raw materials and commodities. While the per capita income in China and the per capita consumption of fuel is much lower than in the USA, their population is well over a billion people. At the rate they are going it will not be long before they consume fully as much fuel and other raw material as we do and have an economy which could rival the annual GNP of the USA. Not only are they an economic and manufacturing powerhouse, but they have a huge army. As their manufacturing capability increases not only quantitatively but qualitatively they become more and more of a super power. While the USA may have won the cold war with Russia, at the rate things are going as much as American consumers may benefit from inexpensive but high quality-guitars, furniture and other products from China, we may find ourselves in the uncomfortable position of no longer being the only world super power.
Decca's flat-top acoustic guitars seem to usually sell for $50-75. They're not highly regarded because (a) acoustic guitars don't have the collecto-mania of electric guitars, except for certain brands (Martin, Gibson, etc.), and (b) the tonewoods Decca used were inferior to solid spruce as used by the aforementioned makers. Indeed, Decca often used plywood, which doesn't yield very good tone in an acoustic.

Let's look at how the professionals go about combining the close and ambient techniques we've looked at so far, in order to create specific custom setups for different recordings. Joe Barresi, for example, relies heavily on the trusty SM57 and MD421 combination, but he'll choose from a variety of other mics to give character to particular sounds. "The two microphones I use most for recording electric guitars are the Shure SM57 and the Sennheiser MD421, often both, close up, placed at the edge of the speaker, where the speaker centre meets the cone, or, if I'm looking for a more bright sound, dead centre. When I want more low end, I may have an AKG C414 on there, and when I'm after a little more personality, a Neumann U87, backed up a foot, or a ribbon mic, like the Royer 122, or an RCA BK5 or 77."
First, you need to determine what type of guitar you have - acoustic nylon, acoustic steel string, or electric. You want to be sure to use the correct strings for your particular guitar. Acoustic guitars that require nylon strings, such as classical, flamenco and some folk guitars, generally have lighter tops, or soundboards, with less internal bracing than those found on steel-string acoustics, and stand the risk of serious damage if fitted with steel strings. Steel-string acoustics are designed to withstand the added stress that steel strings exert on the top, bridge, nut and neck, and won't sound very good with nylon strings, if they even fit. Electric guitar strings must be made of ferromagnetic metals like steel and nickel, so they can interact with the magnetic pickups, while acoustic-electric guitars typically use a different type of pickup which senses vibrations from the bridge, so acoustic strings may just have a steel core wound with a phosphor bronze alloy wrap for bright tone. Guitars with whammy bars might require a few extra steps to keep everything stable, so check your manufacturer's instructions or look for online videos.

Wah – a frequency-based effect that creates a sound similar to a voice saying “Wah”. A Wah pedal uses a filter that sweeps across the frequency band. In a pedal wah, pressing the toe down will make the guitar signal brighter; heel down makes the signal darker. The filter can be controlled either automatically by electronics within the pedal or manually by the use of an expression pedal giving the guitarist’s hands-free control over their tone.
While you don’t have to mortgage your home to buy a good guitar, price will still be a key factor in deciding which guitar to purchase. When buying for a beginner—especially younger players—you may be hesitant to spend too much without knowing if the recipient will stick with the guitar. That’s perfectly reasonable. There are guitars to fit just about every budget. Just keep in mind that the better the guitar the new player starts with, the more likely they will be to continue learning and playing. An instrument that’s hard to play or won’t stay in tune will deter even the most enthusiastic beginner.
A neat recording solution for when you want the sound of a speaker running flat out, but without being thrown out of your flat by your neighbours!A practical method endorsed by those engineers who don't like to leave their comfortable chairs too often is to combine the above techniques by using two close mics, one on-axis and one off-axis, plus one distant mic a few feet from the cabinet. If the close mics have very different characteristics, for example a capacitor mic on-axis and a dynamic mic off-axis, you'll get an even greater choice of tonality, as you can vary the mic balance being recorded. Switching the phase of individual mics can often yield interesting combinations and, if you really don't want to leave that chair, you can also delay the ambience to increase its effective distance when it is combined with the other mics. Each millisecond of delay is roughly equivalent to 12 inches of added distance.
This specific review is for the full-size guitar, which is 40”, so if you read all the reviews on Amazon, many of them are for the ½ and ¾ size. If you’re an adult with smaller hands, purchasing the smaller sizes may be a better bet than trying to wrestle with a full-size instrument. Size doesn’t necessarily have to do with this guitar model’s tone, which many reviewers say is quite good for the price.
The GE-7 Graphic Equalizer is good to have after the overdrive in case you want to use it to scoop mids or bump certain frequencies for solos. (To show that these are not hard rules, it also works pretty well if the EQ is after the compressor but before the overdrive. But this changes how the EQ sounds, since you would be distorting it with the overdrive, so try it in the suggested position first.) Also, it’s good to have the EQ before the noise suppressor, since EQs can add noise as they boost tone at various points in the frequency spectrum, including any noise that is already there.
Fender made some pretty big waves when they announced their latest line of Mustang amplifiers – primarily because of their sound-shaping abilities. You see, the brand’s modeling amp line has 17 preprogrammed amp models to choose from, as well as an auxiliary input so you can play along to your favorite tunes, and a wealth of included effects. The real highlights of this particular amp, however, can be found outside of the amp itself. You see, it includes a smartphone app that will let you shape the sound of the amp easily and remotely. Better still, the amp comes with its own recording software, so you can capture your songs at your leisure. For something so inexpensive, this amp packs a serious wallop.
The guitar player who makes his guitar sound anything but a guitar. Helicopter rudders, disc scratching, and his use of the kill switch for staccato like guitar riffs has made him probably the most innovative guitar player of our time. He is a guitarist who can take feedback, and ground hum from his own body into coherent music. Be it Rage Against The Machine, or Audioslave you can always see Morello’s signature licks shining through.
I'm going to break the electric guitar setup guide into five parts, which are all in the links below. It's important to note that the five parts be done in the order in which they're presented. If you have a truss rod that's out of whack, it makes no sense to move on and adjust the bridge. I realize this may be painfully obvious, but for the one person who may not get it, I'm talking to you. Good luck
{ "name": "Belmont Blue", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Belmont-Blue-1500000152096.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "12-03-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152096", "shipToStore": true, "displaySku": "K47863000003000", "displayId": "1500000152096   POS #: 113861058", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000003000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/California-Redondo-Player-Acoustic-Electric-Guitar-Belmont-Blue/K47863000003000-00-140x140.jpg", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Belmont Blue", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
“The V100MU is everything I want in a guitar. The variety of tones from the Wilkinson W90SK pickups combined with the vari-coil enabling me to go from single coil to quasi double coil whilst the roller bridge and ‘classic’ vibrola is something I’ve never seen before on a contoured topped guitar. It really is a thing of beauty not just to look at but to play.”

It is a popular technique in which the player's thumb or index finger on the picking hand slightly catches the string after it is picked, canceling the fundamental of the string, and letting one of the overtones dominate. It is used by popular guitarists such as Eddie Van Halen, Steve Vai and Joe Satriani who utilize the tremolo arm and high gain amps together with the pinch harmonic to produce horse-like wails from the instrument. - winner333

STEM educators take part in a five-day institute focused on how to manufacture guitar parts for their classroom or for the nationwide network of schools that are implementing the project. Modularized curriculum with assessments will cover the content provided as part of the institute. The primary focus of the institute will be the application of CNC technology as it relates to manufacturing guitar components. The participants leave this institute with the modularized curriculum and a custom guitar body they have designed and fabricated. The additional parts necessary to complete the guitar are also provided.


TASTING NOTES: The dynamic mics have the sharpest, edgiest tones. The condensers have a neutral, full-frequency sound. The ribbons have rounded highs and warm lows. Remember, though, that the prettiest sound isn’t always the best choice. Many engineers swear by the relatively harsh Shure SM-57, and not just because you can buy one for less than $100. Its tough, even brittle, edge can shine in aggressive rock mixes.
I have an acoustic that I bought from a lady I know who said she has had it since the early 70's. It says 'Maya' on the headstock and the reinforcement rod cover is stamped with 'Takamine'. The sticker inside the sound hole says 'Maya', "We made this guitar for the people who love guitar music", Made by Takamine, Model No. TF1o1S, Japan. On the inside of the sound hole at the top, the wood block there is stamped with 46.6.3. The guitar is only about 3 1/4 inches deep and approx. 15 inches wide at its widest spot. Small guitar with a big beautiful sound.
The only known American distributor of Lyle guitars is the L.D. Heater Music Company. A small warehouse based in Beaverton, Oregon, L.D. Heater was owned by Norlin, the parent company of Gibson, and known more for their exclusive production rights to Alembic instruments. As protection from potential lawsuits, Lyle guitars were part of the contract that stated under which brand names Gibson-licensed guitars could be produced and distributed.
Furtadosonline proudly presents our wide range of bass guitars for every playing style and musical need. Whatever the type of music you play, you\'ll find the right bass guitar from all your favorite brands Gibson, ESP, Warwick, Squier,Yamaha, Epiphone, Musicman, Cort and many more. Feel free to Choose an electric bass, an acoustic bass, an upright bass, a fretless bass, a left-handed bass, a 5-string bass, and even a 6 string bass, we have it all. Don\'t forget to browse through our portal for essential bass gear like bass amps, bass effects, bass heads and bass speaker cabinets. If you\'re shopping for bass guitar accessories look no further, bass strings, hardshell case or a gig bag for your bass. Feel free to take advantage of our wide range and great seasonal discounts. It is absolutley safe to purchase from us online and we can assure you total satisfaction backed by the Furtados Service Guarantee.
“Well, the legends didn’t use pedals.” Whenever somebody says something like this, and you ask them to whom they are referring, they’re often misinformed and factually wrong. “Jimmy Page”. Uh, ever see him use a Tone Bender Mk II? “Jimi Hendrix.” Please feel free to complete a Harry Potter novel while I finish laughing. “Stevie Ray Vaughan.” Ibanez and Maxon should retire a green Tube Screamer colored banner with his name hanging from their company rafters. This list goes on and on. Yes, there are lots of cool dudes back in the old times who didn’t use pedals to help them create some classic tones, but once they had the chance, they chose to.
The Mustang bass debuted in 1966 as (along with the Coronado) Fender's first shortscale bass, however the Competition finishes were not seen until 1969. It was effectively the same instrument, with sports stripes, and initially a matching coloured headstock. The competition colours were Red, Orange and Blue (although blue was officially called Burgundy). Have a closer look at this 1969 Fender and check out the soundclips through various vintage amplifiers.
The amplifier includes buttons for four different amplifier simulations: Clean, Crunch (a typical rock/blues sound), Metal (self-explanatory), and Insane (a version of Metal that our panelists found so distorted as to be nearly unusable). Like the Champion 20, it has a gain control (which is labeled Drive), and it adds a midrange control to its bass and treble controls.
The GT-70 was a re-styled two-pickup, single-cutaway recalling the F-55s. The cutaway retained the wide horizontal angle of before, however the upper bass bout received a more graceful treatment, with a slight inward curve as it met the neck at the 16th fret. The controls were the same as before; the elevated pickguard had become a large white affair, the tailpiece was the V-notched Bigsby. Pickups remained our familiar DeArmond humbuckers. Gone were the plastic bridges in favor of metal adjustable finetune variety. Finishes were either burgundy or black. The first prototype serial number was 203803. Around 1,450 of these were made between January of 1966 and October of 1968.

Fender’s open-back combo tube amps have been used on countless hit records in practically every genre of music in the past half-century. They can deliver both warm bell-like clean tones and gritty overdriven snarls. The Blue Junior III is a relatively inexpensive way to get into Fender tube amps, and it’s the perfect size for studio and small venues.


Jazz guitarists use their knowledge of harmony and jazz theory to create jazz chord "voicings," which emphasize the 3rd and 7th notes of the chord. Some more sophisticated chord voicings also include the 9th, 11th, and 13th notes of the chord. In some modern jazz styles, dominant 7th chords in a tune may contain altered 9ths (either flattened by a semitone, which is called a "flat 9th", or sharpened by a semitone, which is called a "sharp 9th"); 11ths (sharpened by a semitone, which is called a "sharp 11th"); 13ths (typically flattened by a semitone, which is called a "flat 13th").
Sounds cool! You’re right that flats are a key to the ’50s Nashville sound. But a lot of guitarists forget that almost EVERYONE used flats until the latter part of the ’60s. Early Beatles, Stones, Who, Kinks, Motown and other R&B, surf, and of course anything jazz-related — it’s all flatwound guitar work till ’66, ’67 or so. Also, the main reason we migrated away from nickel is because the material became markedly more expensive at the end of the decade. (Though yes, some did prefer the brighter tones of replacement materials.)
What makes the wah so timeless is its versitility, it can emulate a human voice, be a rhythmic device, boost a screaming lead, a tone shaping tool, among other uses.The first known commercial recording of a wah pedal is Cream’s “Tales of Brave Ulysses”. As we know the distinctive sound caught on with just about every guitar player on the planet! There are too many uses of the wah to mention here, almost 50 years later it is still a must have pedal for every guitarist. For an in-depth look at wah history and a great read please check out “Analog Man’s Guide To Vintage Effects”.
Firstly, they are cheaper than their tube counterparts, which is why most beginners will end up starting on a solid-state amp. They are also much more efficient, easier to maintain (no need to change tubes), lighter to carry, and less fragile. While the tone of modern-day solid-state amps can be incredible, they don’t tend to be as fluid or responsive as tube amps. For more on solid-state amps, check out our dedicated solid-state amp page.
Talk about sweet... gorgeous exotic Hawaiian woods.... The Beautiful curly Koa wood is so rare it is only found in the beautiful Hawaiian Islands...This example is well over 30+ years old and has mellowed to perfection...Very Clean Original condition WoW!....See the pics This one sounds amazing...talk about fun...I got into the Uke after seeing the Beatles anthology interview footage with George Harrison on Maui at his home had several Ukulele's at his home when company came over usually other pro buddies they would all have one to Jam on....so great footage of George etc....and we go to Maui every year now for the last 7 or so..you see the gorgeous Koa Wood everywhere you go almost...but The Curly stuff like this Uke is Very Expensive, This Uke's neck is arrow straight and is also highly curly & figured.... This one is the REAL DEAL folks and it don't get much better...Made in Hawaii in the 60's...in very good-excellent original condition so light finish checking only adds to the wonderful vintage feel of this great player...no disappointments .
Far as commercial recordings go, the oldest recording seems to be by the Hawaiian group Noelani Hawaiian Orchestra in 1933, which did four songs featuring the electric lap steel recorded on Victor records. However, the guitarist is unknown. Bob Dunn recorded electric lap steel in 1935, as part of the country swing group Milton Brown and His Musical Brownies. George Barnes recorded "Sweetheart Land" and "It's a Low-Down Dirty Shame" with Big Bill Broonzy in early 1938, followed a couple weeks later by  Eddie Durham with the Kansas City Five. Barnes played conventional guitar, not lap steel, so that's the first recording of a "conventional" electric guitar performance.
So, I was looking for a single-ended amp. Say what you will about class A/B amps (and, to be fair, most of the great recorded tones in rock history are class A/B push-pull amps), some of them don’t really get singing until they’re too loud for the bedroom or studio. Sometimes you just need to hear that cranked tone without getting the knock from the neighbors. To quickly recap:
Support your local music shops! The Guitar Store is a great spot in a convenient location. Helpful and friendly staff all around. A good assortment of electric and acoustic guitars, amps, and more pedals than you could possibly imagine. No cases full of BOSS Metal Zones either - we're talking real pedals for the pedal enthusiast. They also are great for lessons/workshops and instrument repair. We had been bugging the guitarist in my band for having a noisy output jack for weeks. He took his guitar in, came in during a slow time, and they replaced the jack for him on the spot! Amazing! So while Guitar Center might be your only option to buy that fancy pack of tapered-B 5-String bass strings, The Guitar Store should be your first choice for literally anything else. Check it out! SUPPORT LOCAL MUSIC SHOPS! But they make you leave your backpack at the counter?!? ZERO STARS!!!!! ;-)

well it does not effect the strings electronically. however. each pickup depending on its position on the guitar is designed to pick up a specific range of tones. the pickup closes to the neck is meant to pick up the bass range whereas the one closest to the bridge is meant to pick up the treble(higher) end of the tonal spectrum. all that aside when you actually move the switch it might have a reverberation throughout your guitar because the switch is just really hard or stiff. it might need to be broken in no worries there.
The Marshall CODE412 - 4x12 Speaker Cabinet is a powerful monster designed as a companion to your CODE 100 head. A classic angled cabinet that is packed with four 12” speakers, each with a 30-watt output. This extremely affordable 4x12 amplifier cab is perfect for those in need of a high-quality option for their set up, whether you have a CODE or not. A single input makes it easy to plug and play and the 24kg weight ensures you won’t break your back carrying it to practice. It’s also Marshall’s most affordable friendly speaker cabinet, making it a great choice for those on a budget.

Is there any particular reason you're opposed to Kontakt libraries? All of the plugins you mentioned are sample-based themselves, with the notable weakness that you would not be able to change the mapping, grouping, programming (etc), unlike with Kontakt. As someone who uses a lot of virtual instruments, I'd say it's always preferable to have a sample-based instrument in an open sampler plugin since you can see what's going on under the hood and change things like envelopes as needed.
Dave Murray: select alder body with a nitrocellulose lacquer finish, flat soft V-shaped maple neck with satin back, 21 medium-jumbo frets, American Vintage hardware and ahumbucker/single-coil/humbucker configuration – DiMarzio Super Distortion DP100 (bridge), American Vintage ’57/’62 (middle), DiMarzio PAF DP103 (neck) – with 3-way switching. Other features include chrome pickup bezels, synthetic bone nut and aged white plastic parts with black switch tip. Available in Black only and as a Japanese “Tribute” version with an original Floyd Rose locking vibrato system, dual DiMarzio Super Distortion DP100 humbucking pickups (Neck/Bridge) with a Fender Texas Special single-coil pickup (Middle), 3-way switching and an oval neck profile.
These guitars work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Semi-hollowbodies are noted for being able to provide a sweet, plaintive or funky tone. They are used in many genres, including blues, funk, ’60s pop and indie rock. They generally have cello-style F-shaped sound holes, though these can be blocked off to prevent feedback, as in B.B. King's famous Lucille.
×