By the late 1970s, costs of manufacture in Japan had risen to such an extent that it was difficult to make student-grade guitars over there. It was far less expensive to manufacture instruments in Korea. Numerous factories were built, and existing facilities in Korea were expanded. Samick built a factory capable of producing one million instruments a year. Japanese companies invested heavily in Korea so that they would be able to produce their low-end models in Korea and high-end models under the same brand names in Japan. The early Korean-made instruments were not as good as the Japanese ones, but it did not take nearly as long for Korean quality to improve as it did for the Japanese to go from making crude low-end models to sophisticated instruments suitable for professional use. The Koreas had the benefit of all of the Japanese experience especially in the cases of factories with Japanese ownership or management.

As a rule, acoustic guitars with laminated spruce tops do not have the same resonance as those made from unlaminated tonewoods, but the Fender FA-100’s fuller dreadnought design provides a richer tone than some customers may expect. If price is a consideration, the Fender has been described as a “cheaply made guitar with a fantastic sound.” What’s more, When you buy a Fender product, you're investing in quality. The Fender Musical Instruments Corporation has been manufacturing instruments and equipment since the 1940s.
Bell's journey to become a guitar master began with a car running over him as a child. He was an aspiring baseball player just shy of his 13 birthday and left with a fractured skull that ended his future career. So he picked up the guitar and fell in love. He's been building and repairing guitars since 1975. Today, he's running Bell's Custom Guitars on the side and repairing guitars at Murphy's Music in Irving.
Fantastic article. I pretty much do all of my recording nowadays through my AxeFX II. Paired with a good set of studio monitors, it’s perfect for the at-home musician who does not want to sacrifice quality. I have a nice Tone King amp and pedalboard with nice boutique pedals like the Strymon Timeline, but when recording it’s so much easier to plug the AxeFX into my laptop. I don’t have to fuss about with mics or room treatment. Also, having three big dogs, it’s great to not worry that they’ll start barking in unison at the mailman when I’m almost finished with a “perfect” take.
Much of this is probably thanks to an outdated a pedal with a two-function switch that is labeled “Chorus” and “Vibrato.” These words will trigger a sigh of awe and wonder from many a guitarist because, of course, they are the labels on the mode switch of the famous Univox Uni-Vibe. This pedal is a good place to start because it was one of the first of the transistorized effects of this type to become widely available, and it occupies a patch of ground all its own in the world of things that go “swoosh”. That said, and despite the name and switch labeling, the Uni-Vibe is more akin to a four-stage phaser than what we today consider to be a chorus pedal, even if that’s the label on its most-loved setting. The deception is forgivable when you remember that the Uni-Vibe’s intention was to reproduce the chorus-type sound—or “chorale” sound, as it was often labeled—produced by a Leslie rotating speaker cabinet used with a Hammond organ. Also, the unit existed before there was much categorization of such things: it was a guitar effects footpedal, it had its own sound… and that was all anyone needed to know. The Uni-Vibe—and the better clones that have followed it down the years—is based around a discrete transistorized circuit with four sets of light bulbs and light cells and a low frequency oscillator (LFO) which does the shifting work to move the peaks and notches. Unlike the drawing-board phaser discussed above, however, the frequencies of each stage of the Uni-Vibe are set differently, so it could be argued that there is indeed more of a chorusing of the sound.
Neck Construction – The neck part of the guitar includes the fretboard and headstock. The tuners are mounted on this part of the guitar. The width and profile of the neck affects the playability of the guitar. Most necks are either “C” or “U” shaped. In most cases, the fretboard is made from a thin layer of rosewood or ebony, but some guitars have maple necks. Fretboard have position dots and other inlaid markers that assist the player. There are generally 3 types of necks – bolt on, set neck and neck through.
I have been playing guitar for over 40 years and purchased Taylor's, Gibsons and Fenders as well as many others. This Godin company understands value and passes that along to its customers. Fine tone when played acoustic or threw an amp. The wood tone and workmanship are awesome for this or any price point. You will not be disappointed with this guitar, it is a great value.
Fender’s MIM (Made in Mexico) Stratocasters are offered as an affordable option, buyable at about half the rates of their American siblings. Moreover, you can also select your preferred one from among the maple and rosewood fingerboards, SSS or HSS pickup configuration, and color variations. You can also find several models available with Floyd Rose tremolo and pretty tops. For those requiring American Fenders, the American Original Series is available with all essential features.
GuitarFX™ guitar software (it's on the market since 1997!) enables you to turn your computer into a guitar effects processor. Simply plug your guitar into the microphone or line input of your sound card, run this software, then press "Start" button. To stop playbacking pre-recorded guitar sounds click once on a picture of a small red lamp placed left to fx-slot with "Playback wav" title. Enjoy real-time crazy distortion smoothed by power filters and shaped by multi-band equalizers! Author of GuitarFX™ offers several presets, including "hard rock", "high gain lead" and "solo" effects. However, you can click through several menus to easily create custom tones. They can be saved as pre-sets for future use. Pre-sets can be assigned to "hot keys" F1..F12. Among the effects, you can apply 4 types of distortion, noise gate, wah-wah, compressor, EQ, flanger, reverb, chorus, delay and a number of other filters and effects. You can save your recordings to your hard drive. GuitarFX has the "software effects chain builder" with 16 fx slots. Clean guitar signals go to the top fx slot, then they are passed through all fx slots from the top to the bottom and go to the sound card output from the bottom fx slot. You can move any fx slot up. To do this place your mouse cursor on the top part of the appropriate "Tune" button and then do right mouse button click. Also you can move any fx slot down. To do this place your mouse cursor on the low part of the appropriate "Tune" button and then do right mouse button click.
Mijn first guitar was a Epiphone by gibson sg, it was all right, then I got my gibson sg special(Around 550e), really good guitar, huge difference with the Epiphone. My next was, believe it or not another Epiphone, a Casino limited edition with bigsby, best price/quiality guitar ever(I paid 430e), beautiful guitar, and next week I’m getting a Fender Telecaster American vintage 58′(1755e), I’m very excited about it. I also own a Fender jazz bass classic 70s, it’s a mexican which plays like an american, very proud of this bass. First rate guitars are normally the best, you pay for the quality of the materials and the workmanship and experience, but there are exceptions with second range guitars, you can get very good ones, just good models or plainly good guitars, it’s nice to own both kind of guitars.

In 1956, Albert King (real name Albert Nelson) had moved to St Louis Missouri and his soulful blues performances were becoming very popular in their own right. He changed his surname to King on account of B.B King’s success with “Three O’Clock Blues‘. By 1967, the title track of his album ‘Born Under a Bad Sign‘ became his most popular and influential release.
If you are looking for a specific guitar wiring diagram, I would contact the manufacturer of your guitar. Most guitars have similar style wirings. If you have a Stratocaster style guitar that is made by another company, I would go ahead and just use a Strat wiring diagram. I have listed a few books on electric guitar wiring in my book section. Go to the electric guitar pickup wiring section for more information.
Their selection these days is insane, especially since they target a lot of awesome smaller brands that NOBODY else in the area carries. I'm pretty sure this is the only place in town you can go to play the Reverend line, not to mention damn near every PRS model currently in production. The locally-made boutique stuff they stock is awesome too, and I would have never even known about it had it not been for the shop.
It is also believed that 'Terada Musical Instrument Co., Ltd. of Japan also made some guitars for Ibanez during this period.' It's thought that 'these would be mostly hollow-body guitars, but may also included some solid-body Artist series models.' There is no proof whatsoever for either of these assumptions. It's most likely that this is a big misunderstanding caused by an over generalization in the database of the "Guitar Dater Project" website, which is not able to assign the right factory to a vintage Ibanez guitar based on its serial number. The false information this website generates has been propogated in numerous advertisements of sellers of vintage Ibanez guitars. There is no proof whatsoever of any solid body Ibanez guitar produced by Terada. On the contrary: the fact that the production of solid body Ibanez Artist guitars shifted to Iida Gakki 1987, while hollow-body and semi-hollow Artist guitars became Artstar labels with H serial numbers, shows that the original production before 1987 came all from the FujiGen Gakki factory, which was experiencing capacity problems during that time period caused by their commitment to produce guitars for Fender Japan. If Terada had produced AR models already, they would have continued doing so. The AR and AS models shared the same necks under the Artist flag. Splitting the production up from a situation in which they were already both made in the Terada factory wouldn't be efficient, so it is highly unlikely that pre-1987 AR and AS models were ever made there.
   I am now building several models which I offer as my signature work. I've always had a special affinity for archtop guitars, but as you'll see in this website, I will go wherever the creative impulse takes me. The instruments I am building now are a distillation of the best design ideas I've found in classic instruments, re-imagined and evolved into higher form and function, as fine tools for discerning artists. 
Eight-string electric guitars are rare but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars. The largest manufacturer of eight- to 14-string instruments is Warr Guitars. Their models are used by Trey Gunn (ex King Crimson), who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars, and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the seventh and eighth strings. Stephen Carpenter of Deftones also switched from a seven-string to an eight-string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK, which is the first mass-produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.
Awesome amp. This one sounds awesome and is not ice picky like some I’ve Owened before. This one sounds awesome and is in great shape (see pics for condition, few drinks, but nothing noticeable u less u are super close). Unfortunately I am listing this and my Jonny marr Jaguar since I need cash. Will only sell one item. If my guitar sells, this will be unlisted
While he could put out an album of his farts or slap his name on any shitty guitar and still make millions, he is a painstaking perfectionist who spent years agonizing over every minute detail of his EVH Wolfgang guitar and EVH 5150 III amp before offering it to the public and who has refused to release a new Van Halen album until he feels it’s ready.
Bassists can put an incorrect (that is too low) impedance load on their amplifiers even if they connect multiple speakers that are at the correct impedance rating. For example, if a bassist has a combo amp in which the power amp is rated at 4 ohms, and she/he plugs in a second 4 ohm speaker cabinet in parallel, this will drop the impedance ("load") on the amplifier down to 2 ohms, which is too low for the amplifier. When speakers of different impedance are wired up together (e.g., an 8 ohm speaker cabinet and a 4 ohm speaker cab, the impedance is calculated differently). In most applications, when bass speakers are plugged into an amplifier, they are wired in parallel. The parallel "input/output" speaker jacks on the rear of most bass cabinets, when plugged into additional speakers in a "daisy chain" approach, will cause the speakers to be connected in parallel. More rarely, bass speaker cabs may be wired up in series, which means that the impedance is calculated differently. Series wiring is much more complicated and in cases where a bassist is using series wiring, a custom-made cabling system is typically used. Some bass manufacturers that build large speaker cabinets with multiple speakers may wire some of the speakers in series and some in parallel to achieve a certain impedance rating for the entire speaker cabinet (e.g., in 8x10" speaker cabinets, the speakers inside the cabinet may be all wired up in series, but the overall cabinet's "input/output" jacks are in parallel). Professional bass technicians and speaker designers setting up custom-made bass speaker systems for bass players from major bands may use an electronic meter to test the impedance of the speaker cabinets they design.
While a noise suppressor/gate is not a modulation effect, it usually works and sounds best when it’s placed either directly after or in front of modulation effects. I prefer the noise suppressor after modulation effects as this placement will mute an unwanted constant “whoosh” that often can be heard when a flanger or phaser shifter is engaged even though the guitar is silent.
First introduced as a 35th Anniversary Edition Guitar in 2009, it joined Taylor’s standard line up as a Specialty Model in 2010. The Baritone model features a Grand Symphony body and a longer 27-inch scale length which enables it to be tuned from B to B while maintaining normal string tension. It comes in either 6-string or 8-string option. The 8-string models incorporates a pair of octave strings that double the 3rd and 4th (D and A) strings. Solid wood back and sides available for the Baritone model are Tropical mahogany or Indian Rosewood with rosewood binding and an abalone rosette.
Bridge craft USA musical instruments presents the exceptionally designed Glen Burton GA204BCO Acoustic Electric Cutaway Guitar in Black by Glen Burton. Perfect for the beginner or the expert, the full package comes with Strings, Picks, Gig Bag, Strap, Digital Clip-On Tuner, Truss Rod and a 10 Watt Amplifier . This excellent Acoustic Guitar also includes: Flame top; Basswood back and sides Catalpa Neck and Bridge; Rosewood Fingerboard Steel String; Sealed Gear Tuners EQ: Active 4 Band 7545 .
That’s not all modeling processors can do. In addition to offering guitar and amp models, most guitar modeling processors have libraries of the kinds of effects you would get from individual pedals—reverb, echo, chorus, overdrive, distortion, fuzz, etc., as well as integrated drum machines with scores of preset rhythm patterns to help your practice. You can run several effects simultaneously, combining them to create your own unique tonal palette. Most modeling processors now have USB connectivity, some even with two-way audio streaming, for use as interfaces in direct computer recording.
The Guild Starfire V Electric guitar is a deluxe cutaway with loads of outstanding features that gives a fully expressive voice to the user’s playing style and taste. Designed as a semi-hollow electric guitar, the Guild Starfire V features a beautiful thin line body with little twin Guild LB-1bucker pickups that make it suitable for rock, blues, roots and a lot of other variety of music styles.
The size and shape of the ME-80 is comparable to the Line 6 POD HD500X, though the Boss measures a few inches smaller, and also weighs a few lbs less. This is a Boss product, and as such it’s built like a tank. No worries whatsoever over the build quality of the chassis, knobs, and footswitches. Starting with the rear of the ME-80, you can see the I/O is pretty basic - mono input for your guitar, stereo output, a headphones jack, AUX in (so you can plug in your iPhone and jam along to your favorite tracks), and a USB port. Like the Zoom G3X and the Line 6 POD HD500X, you can use the Boss ME-80 as a USB interface for your computer and record your guitar straight into your favorite DAW. Oh and one small inconvenience is that you’ll need to buy the power supply separately. Why Boss doesn’t just include one for a unit of this quality and price, we don't really understand. If you do end up getting the ME-80, this is the power adapter you want. It can also use 6 AA batteries which is good if you need to use this on-the-go, but we don’t recommend it as it will suck those batteries dry in no time.
You didn’t think we would forget bass amps, did you? Due to their inherent differences in design, bass guitars require a dedicated amplifier – using your old Fender Champion isn’t going to cut it. Bass amps offer more power, with some outputs reaching 1000 watts or more. Like guitar amps, bass amplifiers come in many shapes and sizes – including heads and combos – although the mid-range Hartke HD500 offers a stage-worthy 500 watts of power in a portable combo unit, with great controls and an excellent balanced tone.
The Line 6 POD Farm program is famous for its amp simulation, however many users have realized that the quality of its modeled effects are equally superb. Some even use the POD Farm strictly for its effects! It has a huge collection of FX - up to 94 - and it modeled some of the most popular stompboxes including the MXR Phase 90, ProCo Rat, Uni-Vibe, Arbiter Fuzz Face and Big Muff Pi. It also includes modeled versions of old analog devices like the EP-1 Echoplex. Setting up is a breeze with its simple carousel-style interface, which lets you visualize your signal chain. Current Retail Price $49.00
The name has a long and involved history that is interwoven with that of the resonator guitar. Originally coined by the Dopyera brothers when they formed the Dobro Manufacturing Company, in time it came to commonly mean a resonator guitar, or specifically one with a single inverted resonator. This particular design was introduced by the Dopyeras’ new company, in competition to the already patented Tricone and biscuit designs owned and produced by the National String Instrument Corporation.
Producing one of the most popular clean sounds in rock, you’ll rarely see a solid-state amplifier with as much notoriety as the Roland JC-120. The amp was introduced in 1975, offering pure “JC Clean” sound with 120 watts of power and a built-in Dimensional Space Chorus effect. The JC-120 features dual 12” speakers plus dual power amps that drive the speakers to their full potential for a stunningly clear sound. As a result, the amplifier became a favorite among players like Andy Summers, Robert Smith, Johnny Marr, Jeff “Skunk” Baxter and more.

The more difficult nut to crack in emulating the full drive train of a modern guitar is the instrument itself. That breaks down into two categories -- acoustic and amplified. VSTs and the gear that emulate the performance logic and physics of a guitar can get close to an acceptable reproduction of acoustic instruments but that last mile will be a hard gap to close. That's because the resonate bodies of most instruments -- especially stringed instruments -- are shaped differently than speakers. The materials, the inertial matrix, they're just not the same. The resonance of a stringed instrument originates at a single point of impact with the string, much as a speaker's sound originates at a sort-of single magnetic point, but inertia carries the vibration of a bowed or plucked string through a 3D body to produce 3D acoustics that cannot be exactly matched with a forward facing speaker -- or by speakers facing front and back. Close, but no exact match. We might argue that speakers can render sounds closer than a human ear can detect, but nuanced vibrations picked up in the bones and fluids of the human body could arguably betray a difference.

Replace components. From plugging in and unplugging my guitar so much, the stock input jack lost its grab. So I had an extra Radioshack one lying around, and I soldered it in. Now all my cords are held tight. I also had a problem(common with Teles as I understand it) with my input jack "cup" coming out with wires and all. Once you take a look at how it's held in there, it's an easy fix.
Vacuum tube or "valve" distortion is achieved by "overdriving" the valves in an amplifier.[40] In layperson's terms, overdriving is pushing the tubes beyond their normal rated maximum. Valve amplifiers—particularly those using class-A triodes—tend to produce asymmetric soft clipping that creates both even and odd harmonics. The increase in even harmonics is considered to create "warm"-sounding overdrive effects.[37][41]
This guitar is one of the more affordable left-handed variants that you will find on the market. With a 41-inch body and a full-scale, you won’t find any limitations to the music you wish to play. The body is 3 inches thick which not only makes it comfortable to hold but also play. The cutaway gives you good access to higher frets while also increasing the appeal of the guitar.
The Fender Tele Jr. is a variant of the Fender Telecaster electric guitar that the Fender Custom Shop produced in a limited run of 100 units in the early 1990s. It uses a Telecaster body shape, scale length, and electronics controls (albeit, with a reversed control plate). However, many of its construction and electronic features—for example its set-in neck and P-90-style pickups—are similar to those of a Gibson Les Paul Junior (hence the name) and Gibson Les Paul Special electric guitars.
Beatles guitarist George Harrison bought a 425 during a brief visit to the USA in 1963.[7] In February 1964, while in New York City, F.C. Hall of Rickenbacker met with the band and their manager, and gave Harrison a model 360/12 (the second electric twelve-string built by Rickenbacker).[7] This instrument became a key part of the Beatles’ sound on their LP A Hard Day’s Night and other Beatles songs through late 1964. Harrison played this guitar sporadically throughout the remainder of his life.

“As a general rule, the more powerful the magnet the more high frequencies you’ll get, and also the more low frequencies as well. The high frequencies don’t really need a lot of power to drive them, but the bass frequencies do. However, it’s also down to the coil windings you use and the gauge of wire. So it's not just the magnet that’s responsible for the change.”
I am a giging, solo acoustic musician from Ohio, performing in Western NY, Buffalo. I only had Acoustic Electrics, 6 and 12 strings until I bought my first Godin A6 Ultra. (Acoustic and Electric Pick-ups). The A6 was impressive in it's own right, so I started looking at other Godin products, and ran into a 5th Ave Kingpin 1. Acoustically it was a 3 star, as I have a couple of Taylors and an Epiphone Masterbuilt that this guitar is no match for unplugged. HOWEVER !! This guitar was designed to be plugged in, and the Tone and ease of Play come shining through when the p90 is in the loop.
i think i have the exact same guitar as you do daniel. it's the same red into black faded with one pickup and no serial number tho. i'm looking everywhere for the exact model info etc. but i can't seem to find it either. i got it free froma guy i know and i had to replace the tuning heads, the strings and some of the ground wiring but now it's doing great. i love it. it has a really good sound for being so old!
If the book had been proofread better, I'd give it 5 stars. For example, there are places where the text has both a fret number and standard musical notation, and the fret number is wrong. The book refers you to play along with the instructional CD backing tracks, but it doesn't tell you which track number to play. It's easy enough to figure out what was meant, but a little more care would have been better.

Depending on your choice of guitar kit you may be required to perform a small amount (or a large amount) of work wiring the guitar. This typically involves a soldering iron and a basic understanding of guitar electronics. You will also need to be able to follow schematic diagrams of pickup configurations. It’s not a one size fits all job either, wiring up a Telecaster is different to wiring a Stratocaster and a Les Paul or hollow body is different again.
Two brands are synonymous with this type of instrument: Gibson and Fender.  Not only were they the earliest to bring the electric guitar to the masses, but the designs they created are still employed today, preferred by budding beginners and working professional musicians alike.  Other companies have made their mark in the market by creating variants on Gibson’s and Fender’s original designs, but they are still identified through the names that the originals were given.
The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.
Soundwise, it still packs the same AudioDNA2 processor but somehow sounds 'better', I think John Johnson (founder of Digitech before it was sold to Harman re-hired to work on this RP) had a lot to do with the improvements. I think they have made this with it being used/abused in mind, from the rigid metal chasis, to the USB connectivity, line-in jack to play along backing tracks, headphone input, stereo out, built-in looper (40 seconds) and the awesome Stompbox and SoundCheck features.
I thin Yamaha LL16 is one of the best acoustic guitar on the market . Yamaha is known for making affordable, quality guitars, and this is one is no different. It features a solid spruce top, solid rosewood back and sides, and an ebony fretboard. It is smaller than the dreadnought guitars – a fact that is neither good nor bad but that does affect the way the instrument sounds and feels.
Two other Spanish guitars were available in 1954 which were not shown in the Teisco history photo, the J-2 and the TN-54. These are pretty much a mystery. The J-2 was likely a two-pickup companion to the J-1, although by a few years later, both these models had become double-cutaways. Whether that was the case with the J-2 from the beginning is unknown, but unlikely. The description of the TN-54 is completely unknown.

On these guitar tracks, I did use a little bit of the 1176. I don’t overcompress on these tracks, I just basically want to get a little bit more sustain out of the notes, so I have it setup so that there’s plenty of attack that comes through. I’m not trying to control that so much as I am the sustain of the note, and get a little bit more length out of it, though I’m pretty gentle with that. Then it just goes into Pro Tools and I record it as is.
Prior to being acquired by Gibson back in 1957, Epiphone once competed with the most popular guitar brands in the market - including Gibson. These days, Epiphone is known for being the affordable sub-brand of Gibson, producing cost-effective alternatives to many of their premium guitars. Many experienced players today credit this brand for manufacturing their first ever instrument, and their popularity in the entry level market continue to soar high.
By the turn of the century, new-metal grinders and post-grunge plodders had given loud guitars a bad reputation. Then Jack White hit the reset button. With each savage riff, he reconnected hard rock and roots music and showed that a blues-based band could escape what he calls "note-pushing Stratocaster white-blues bullshit." And he didn't let his analog leanings prevent him from ingenious use of a DigiTech Whammy pedal – the secret behind the faux-bass thunder of "Seven Nation Army" and the screaming leads of songs like "Ball and Biscuit."
To build an electric guitar, start by cutting out the guitar body from a piece of wood like maple or swamp ash. Then, bolt a pre-made neck onto the body and attach the bridge. Next, install the pick-ups, volume control, and guitar cord. Finish by putting your strings on the guitar and testing out your instrument. If you want to make the process easier, you could try purchasing an electric guitar kit.
Although the book contains some good information, it is not well written. In particular the use of poor grammar makes reading annoying. There is also incorrect reference to measurement units. She makes reference to measuring 1/32 or 1/64 of a millimeter. A millimeter is metric, measuring 1/32 or 1/64 are fractions of an inch, not a millimeter. I'm glad it was a free book.
The company was within three months of going out of business before it was bought by Henry E. Juszkiewicz, David H. Berryman, and Gary A. Zebrowski in January 1986.[18] Gibson's wholesale shipments in 1993 were an estimated $70 million, up from $50 million in 1992. When Juszkiewicz and Berryman took over in 1986, sales were below $10 million.[19] New production plants were opened in Memphis, Tennessee, as well as Bozeman, Montana. The Memphis facility is used for semi-hollow and custom shop instruments, while the Bozeman facility is dedicated to acoustic instruments.[20]
Unfortunately there are a few who are not too happy with with some of the default patches, they caution that the PODHD500X is not a plug-and-play unit. While you can get good tones with a bit of tweaking, you can get even better tones with more experience, so the learning curve can be a bit steep for some. For best results, you ought to research the actual gear that your favorite musicians use, along with their settings and use them as your starting points to creating your own tones. Thankfully, there are user made presets that you can also use as base for your own virtual signal chain.
* 3 most basic reverb modes: Room: Simulates the spaciousness of a room; Hall: Simulates the spatial dimension of a music hall; Plate: Simulates the unique reverberation character only coming from a plate reverberator. * One reverb control balances the dry/wet signal, simple enough to dial in the perfect amount of reverb for your tonal needs. * True bypass for zero tonal coloration. * Extreme mini size for great compactness. * Heavy-duty metal casing for great stability and durability; Connectors include input, output, and power supply; Powered by 9v DC. W/ a 6 inch patch cable included. SONICAKE Digital Reverb is reverb pedal designed to add dimension and spaciousness to your tone. It is extremely straight-forward to use with only one “Reverb” knob to adjust the balance between the raw d.
If you really want your guitar strings to stand out as well as your playing does, then these colourful options from DR are a novel eye-catcher. For even more fun, stick them under a UV light and they’ll glow, too! They might also serve a practical purpose for beginners, too, as new guitarists can quickly identify specific strings based on their colour.
By moving up or down one level, in terms of magnetic strength, you can usually add or subtract a little edge from a pickup. If your guitar is too tangy, moving down one pickup level (e.g., from alnico 4 to alnico 2) may smooth it out. If you want to add bite, go with a slightly stronger magnet—like, alnico 5 to a ceramic magnet. The good part is that magnets are both easy to find and inexpensive in comparison to buying a whole new pickup.
There were marked differences between the other Les Paul models and the Les Paul Junior. For instance, although the Junior’s body outline was clearly reminiscent of the original upmarket Les Paul guitar, the Junior issue was characterized by its flat-top “slab” mahogany body, finished in traditional Gibson Sunburst. The Junior was touted as an inexpensive option for Gibson electric guitar buyers[citation needed]: it had a single P-90 pickup, simple volume and tone controls, and the unbound rosewood fingerboard bore plain dot-shape position markers. However, as a concession to the aspirations of the beginning guitarist buyer, the Junior did feature the stud bridge/tailpiece similar to the second incarnation of the upscale Gold-Top.
Although the G&L Legacy electric guitar was released one year after the passing of Leo Fender, it is designed to the specifications of the original Stratocaster but with a few modern features specific to G&L instruments. The Legacy included, for instance, G&L's Dual Fulcrum vibrato and Schaller tuners and was available in a combination of different tonewoods. Even if the G&L guitars from before Leo Fender's death are more collectable, the Legacy electric guitar is still considered a high-quality instrument.
Ovation Instruments is a Division of Kaman Corporation, a major supplier to the United States government of military helicopters, rescue equipment, electronic components and other aerospace products. There are eight divisions of Kaman, participating in such diverse industries as commercial transportation, nuclear sciences, space medicine, education and social sciences, oceanography and, most recently, recreation.

The classical series includes GA series of which GA 15 series is known for its cedar top with mahogany backs and sides while other ones are famed for their spruce top. The acoustic line comes with perfectly projected design and tone offering. The pick of the lot is AEL, EWP and PF series. As for electrical options RGX, GRG and GRX series make up as the finest of the lot. For other series players around, the RG and AR series are the picks.
alright i think we all need to stop hating on john mayer. I don't think that he really would even call himself one of the best guitarists of all time, he's obviously not far enough into his career to be criticized about this stuff. But i love him, and he eventually will make it on this list. Oh, and for all you who say he sucks and whatever, if he is so bad then why has he played with so many of the people who actually should deserve to be on this list?
Launch price: $499 / £279 | Body: Laminated maple, semi-hollow | Neck: Mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: Alnico Classic humbucker (neck), Alnico Classic Plus humbucker (bridge) | Controls: Neck volume, bridge volume, neck tone, bridge tone, 3-way pickup selector | Hardware: LockTone Tune-O-Matic stopbar, Grover 18:1 tuners | Left-handed: No | Finish: Vintage Sunburst, Natural, Cherry, Ebony
Other early phase shifters used field effect transistors (FETs) to control each phasing stage in place of the light bulbs in the ’Vibe, and certainly later units employed opamps with variable resistors (six TL072 dual opamps or similar in the MXR Phase 100, for example). Electro-Harmonix’s sweet little Small Stone, on the other hand, has a more unusual design that employs five CA3094 type Operational Transconductance Amplifiers (OTAs). The results are similar, but subtly different. Many phasers—such as MXR’s Phase 45 and Phase 90, and E-H’s Small Stone—carry nothing but a speed control, plus a “Color” switch in the case of the latter. Others have Depth, Mix and Resonance controls. The latter appears on many units with internal feedback loops (the Small Stone and most phasers before it lack this circuitry), and allows the player tweak the degree to which the portion of the signal fed back enhances the frequency peaks.
If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
i think i have the exact same guitar as you do daniel. it's the same red into black faded with one pickup and no serial number tho. i'm looking everywhere for the exact model info etc. but i can't seem to find it either. i got it free froma guy i know and i had to replace the tuning heads, the strings and some of the ground wiring but now it's doing great. i love it. it has a really good sound for being so old!

Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural

Players discovered that, if you put the switch in the right position, you could get the neck-and-middle and bridge-and-middle sounds. Jimi Hendrix is a popularizer of this technique, and it became popular enough that the Strat got wired stock with five-position switches. Eventually the middle pickup was made reverse wound and reversed polarity, so that neck-middle and bridge middle would effectively be noiseless, humbucking positions.
JVGuitars is very proud to present to you yet another wonderfully aged High end Law Suit guitars out of Japanese it is a hand crafted acoustic guitar built well almost 40 years ago, what many may not know is that Takamine on these high end exotic tone woods models were master built by using well aged tone woods of 25-30+ years of age at the time when built making this a true vintage guitar in its own right. This example has been very well maintained and taken care of as you will see, this is a California guitar and has not seen much of the ravages of extreme weather and other extreme changes that can damage 0 warp – dry our and Split – crack and otherwise severely damage a perfectly good instrument so this guitar shows no evidence of any of those common afflictions on the contrary this guitar is rather CLEAN over all,Its beautiful solid spruce top is pretty flat and its bridge is nice and tight as well and its bracing ( same as Martin D-28 ) is all good throughout so this guitar has good bones!, bindings too are all good, frets are good and we dressed and polished the frets and they are good for another 20+ years of play, its neck is excellent!.. Fresh install of a new Martin bone nut and compensated saddle and this guitar is set up with Martin Marquis strings and plays beautifully. The original tuning gears are in place and working excellently too. This guitar is a pleasure to play its action is very good at medium - low more on the lower side of medium and it plays with ease and sounds incredible and has even more saddle room to go lower in future if wanted . This guitar has the LOOK it just has it… its absolutely GORGEOUS with the breath taking 2-piece center seam Brazilian Rosewood back & sides - fingerboard and headstock overlay its truly stunning ,as stated it’s exotic TONE WOODS are of the Brazilian Jacaranda verity and its presence overall is stunning perhaps surpassing that of the Original Martin D-28 they copied/ I will suggest that you be the judge of that see for yourself and have a good look At some old Martins as well this guitar stands toe to toe with any of them. This example is nice and deep sounding and its volume is excellent. This guitar is JVGuitars condition rated at 9/10 vintage excellent , it is not new or mint it has a few minor dings as its over 40 years old, it has patina aging that of the color showing on the bindings have Ambered naturally with age this is what make a vintage guitar beautiful this is in the eye of the beholder. These exotic TONE WOOD series guitars in this kind of condition are hard to find these days this one is A real GEM!…… Let me know if interested Thanks for Looking Joe Email me at: excellent recording possibilities.. Pics soon to come ! any questions let me know: .
I have had some dog bad guitars! You and every one passes up Rickenbacker. I just dumped mine, I had two in my life they are bad out dated guitars. I saw people come in a store to buy one, they play one with a great Fender amp and walk out with some other brand. You do not see and of the greats play them. The sounds of the 60's is not a Ricky. Look for them and you will only see old photo of Lennon play one, no solos!
Half a step down from standard, used by bands such as Emmure, TesseracT and Meshuggah in their earlier days, Jeff Loomis (now formerly of Nevermore), Cannibal Corpse mid-career, ERRA, Hypocrisy on End of Disclosure, Adema, American Head Charge, Sonata Arctica in their album Unia, Mushroomhead, Korn in Neidermeyer's Mind demo album, Revocation, Dir En Grey since "Dum Spiro Spero," After The Burial on Forging a Future Self album, Chad Kroeger of Nickelback on the song "This Means War" (Ryan Peake used a six-string), Slayer (on War Zone and Here Comes the Pain from God Hates Us All), and Trivium on Silence in the Snow, The Sin and the Sentence, and all live performances of songs previously written on standard tuned seven string guitars.
Among other things, Peavy is somewhat famous in the guitar amps world for being one of the first manufacturers to produce a close-to-tubes type of sound from their transistors amps. While this achievement might not have seemed perfect for the most discerning of ears, their solid state guitar amplifiers are good enough for the general public not to tell the difference.
This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.
A giant when it comes to the British amplification companies, Vox is always in the conversation when talking about great guitar gear. And that’s no different when the conversation is about amps for beginners. As far as bang-for-your-buck options are concerned, the Valvetronix VT20X definitely ranks at the top – and with good reason: it features tube amp sounds, but with the versatility of a modeling amp (which it is). This impressive hybrid boasts 11 onboard models, 13 effects, and 33 preset programs – allowing you an astonishingly wide range of produceable sounds. And you can control the whole thing from your smartphone, making it easier than ever before. Excellent work, Vox.

Unless you get the guitar that is great for all types of venue, knowing your venue is highly recommended as you might be buying a guitar that has features not suitable or useless to your venue, not only will you be wasting great features for not using it, but you will also be paying for the said features which you will not be using anyway—not practical at all.

A common theme with these models is the capability to easily access the highest notes of the instrument, alongside dual humbuckers and massive sustaining bodies.  The Explorer, much like the V, is now a very common electric guitar shape in the heavy rock and metal genres, but was widely used in other styles as well.  This is evidenced by one of the most famous Gibson Explorer players, Allen Collins of Lynyrd Skynyrd.
Up for sale, a 1961 Fender Super in excellent condition and in perfect working order. And of course this is the most compact Brownface-era amp to feature the "Harmonic Vibrato" circuit. The circuit has just been thoroughly tested by our techs here at Mike & Mike's Guitar Bar and almost all of the original blue Ajax capacitors in the preamp are intact.

Much of this is probably thanks to an outdated a pedal with a two-function switch that is labeled “Chorus” and “Vibrato.” These words will trigger a sigh of awe and wonder from many a guitarist because, of course, they are the labels on the mode switch of the famous Univox Uni-Vibe. This pedal is a good place to start because it was one of the first of the transistorized effects of this type to become widely available, and it occupies a patch of ground all its own in the world of things that go “swoosh”. That said, and despite the name and switch labeling, the Uni-Vibe is more akin to a four-stage phaser than what we today consider to be a chorus pedal, even if that’s the label on its most-loved setting. The deception is forgivable when you remember that the Uni-Vibe’s intention was to reproduce the chorus-type sound—or “chorale” sound, as it was often labeled—produced by a Leslie rotating speaker cabinet used with a Hammond organ. Also, the unit existed before there was much categorization of such things: it was a guitar effects footpedal, it had its own sound… and that was all anyone needed to know. The Uni-Vibe—and the better clones that have followed it down the years—is based around a discrete transistorized circuit with four sets of light bulbs and light cells and a low frequency oscillator (LFO) which does the shifting work to move the peaks and notches. Unlike the drawing-board phaser discussed above, however, the frequencies of each stage of the Uni-Vibe are set differently, so it could be argued that there is indeed more of a chorusing of the sound.
ESP Guitars makes seven types, the Eclipse series, James Hetfield Truckster, and Kirk Hammett KH-3 from ESP, the LTD EC series and Truckster, the Edwards E-LP series, and the Navigator N-LP series, which are based on the Les Paul design. Certain EC models have 24-fret necks and active electronics using EMG pickups instead of the standard passive pickups and 22 frets found in the traditional Les Paul. The Edwards and Navigator lines are made in Japan, and available only on the Japanese market; they come standard with Gotoh hardware and Seymour Duncan pickups (EMG pickups in a few models), and unlike the EC and Eclipse series guitars, which are updated variants on the Les Paul, these are made to be as close to the Gibson 1959 Les Paul design as possible, in the vein of the late 1970s and 1980s “lawsuit” model guitars from Tokai, Burny, and Greco, complete with Gibson style headstocks.
Want to visit our guitar shop? We electric and acoustic guitars in a comfortable laid back environment steps away from the Damen Brown Line, 81 and 50 CTA bus. The guitars we carry are more than just used guitars. Each guitar has a story - whether it’s where it was played, when it was built or how it was treated. Our guitar shop specializes in guitars for players and collectors. Vintage guitars and used guitars are inspected and set up by our Luthier before leaving our shop. Stop by our showroom often as our inventory changes frequently.
Most reverb pedals fall into the ambient effect category, similar to delay and echo in the way it manipulates your signal. It's likened to the delay effect because it's technically a timing effect which, in the world of signal processing, can be described as "sound after sound." In other words, the original sound is produced and another sound follows.
Each option has a unique tonal quality, some may not seem all that useful in some situations.  2 adjacent pickups that are out of phase, can sound very tinny and weak but often cut through better in the mix as they occupy a different placement in the spectrum.  Consider Brian May's (Queen) tone as some of his selections rely on 2 single coil pickups being out of phase

This is hands down THE BEST brand there is! Trust me, I've been playing guitar since I was a kid. I've had used, owned, and tried every guitar there is. Gibson is NO WAY better than PRS, the sound quality of a PRS is awesome! They are pretty light, the designs are awesome as well, although PRS is a bit more expensive than your average guitar it is worth every penny! Gibson's are way too over priced and would never match the PRS. I used to own a gibson sg and lp, and I sold them after I had my own PRS. If you really know the difference between a good and a great guitar you would pick PRS over any other brand. Period.
Amps available in ’61 included the large HG-8 (recommended for use with the EG-TW and Harp Guitar), the Amp-75C, Amp-73C, Amp-72A, Amp-72B, Amp-72C, Amp-71A, Amp-71B, Amp-71C, Amp-30, Amp-4C, Amp-15 and Amp-86 bass amp. These came in a varity of shapes, mostly with either a single color covering with a tweed grillcloth, or the two-tone Amp-30 or the two-tone Amp-15 with a cross-shaped grillcloth area. All had the Swan-S logo. These were most likely still all tube amps at this point in time.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: norma","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"norma","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
To create a fairly live, in-your-face sound, a short reverb or ambience program with a fairly bright character is ideal. A hint of slapback echo or a little pre-delay before the first reflection can enhance the sense of power and intimacy, as when a guitar is played in a small club. More generous reverb can be combined with repeat echo effects to create a lush, spacious sound, but you need to leave space in the instrumentation and arrangements for these sounds to work, otherwise they just sound confused and messy. Feeding the effects send through a chorus or flanger before the reverb gives a nicely complex twist to the sound without being too obvious.

Compressor pedals add a softening effect too, by reducing the front edge of notes and amplifying their tails. This increases sustain by bumping up the signal as the note fades out. Most compressors allow you to control both the thresholds (upper and lower limits) and the knee (the speed with which the signal is raised or lowered). The big appeal for guitarists is the compressor's ability to simulate the natural compression that tube amps generate when driven at medium to high levels. A good compressor can help thicken up the sound of your guitar and add extra punch to your performance.

Kamico guitars were lower-priced versions of Kay's original guitars. They were among the first guitars to use a humbucker type pickup, predating Gibson by some few years.[citation needed] Produced along with Kay brand name guitars from 1931–1951, according to most sources. The most recognizable model is the Jumbo Jazz. Kay also made banjo's under the kamico name.

Ooooohhhhh.... I used the Firebird 12 for two weeks on sessions in 1973.... I STILL solo the tracks I used that on... it's the BEST BEST BEST BEST OF ALL TIME !!!!!!!! FOR ANYTHING !!!!..... in fact, as I remember, the octave strings were wound different than the way Ric does it (high-low) and that even added to the incredible sound.....wanna sell the Firebird 12?

YouTube has become well known for its tutorial videos and how-to clips on every subject on the planet and guitar lessons are no exception. Videos don’t provide the same kind of interactivity as our Uberchord app, which can listen through your device’s microphone and give you instant feedback on your playing. But we agree that YouTube clips can let you actually see and hear what’s going on—it can make a difference when things get confusing.
As much a sculptor as a guitarist, Pajo’s work in post-rock progenitors Slint was a frightening, seemingly rootless display of guitartistry that glided between extremes. Songs formed and dissolved without notice, turned inside out and back again, always at wildly unpredictable volumes. Pajo’s uncanny knack for both creating and shrinking spaces on tape would eventually become the blueprint for later luminaries like Tortoise, with whom he also played.
With a growing popularity of the Les Paul guitars, hundreds of unendorsed imitations and copycat versions had appeared on the markets. However, due to the lack of U.S. legislation to address patent infringements and restrict the import sales, oversea imitations caused legal and financial problems to the Gibson Guitar Corporation. An also troublesome thing was the existence of high quality imitations of vintage Les Paul (and vintage Stratocaster) produced by oversea manufacturers.

First of all, let’s clear up some minor confusion over the name. It has been variously reported, including by me, that the name “Teisco” stands for the name of a company in Tokyo; however this is not the case. Teisco was simply the name chosen by one of the company’s founders, Mr. Atswo Kaneko. There was another prominent company called the Tokyo Sound Co., Ltd. which was responsible for making Guyatone guitars, another major early Japanese brand, some of which came to the United States as Kent guitars imported by New York’s Bugeleisen & Jacobson and others. However, neither of these companies or their guitars had anything to do with the Teisco brand.
@Christos – As mentioned in the article above, wherever they sound good to you is the best place to put them! However, traditionally people tend to put filter pedals near the beginning of the chain (like wah pedals), and volume pedals as well. An EQ can go first if you just want to EQ your guitar signal before running into your effects, or last if you want the EQ applied to your entire signal chain, or somewhere in between. It really depends on what you personally are going for.
One reason that some bass players choose to use a "bass stack" rather than a combo is that the separate component approach enables bassists to use different speaker cabinets for different shows or activities. For example, a bassist playing a stadium may use an 8x10" cab for this show, but then bring a 4x10" cab for a nightclub show the next day, or a 1x12" cab for a studio recording.
Combo guitar amplifier cabinets and guitar speaker cabinets use several different designs, including the "open back" cabinet, the closed back cabinet (a sealed box), and, less commonly, bass reflex designs, which use a closed back with a vent or port cut into the cabinet.[26] With guitar amps, most "open back" amp cabinets are not fully open; part of the back is enclosed with panels. Combo guitar amp cabinets and standalone speaker cabinets are often made of plywood. Some are made of MDF or particle board—especially in low-budget models.[26] Cabinet size and depth, material types, assembly methods, type and thickness of the baffle material (the wood panel that holds the speaker), and the way the baffle attaches to the cabinet all affect tone.[26]
If your guitar is your personality, your amp is your voice. Together, they join forces to deliver your sound. Choosing the right amp ensures the audience hears each note, chord, bend, and trill-just the way you intended. From the compact convenience of a combo amp to the iconic stack to the bone-crushing fury of a wall of cabinets, your new amp is in stock and ready to ship at AMS. Read more
But it would be a mistake to think that this guitar is only suitable for Jason Mraz strumming and happy songs, because it’s just as good for heavy metal! That sweet little tone can easily be transferred to heavy music, or why not pop, jazz or blues? In other words, this guitar is extremely versatile and is the best option for musicians who play many different types of music and want a guitar that works well for pretty much everything.
What worries Gruhn is not simply that profits are down. That happens in business. He’s concerned by the “why” behind the sales decline. When he opened his store 46 years ago, everyone wanted to be a guitar god, inspired by the men who roamed the concert stage, including Clapton, Jeff Beck, Jimi Hendrix, Carlos Santana and Jimmy Page. Now those boomers are retiring, downsizing and adjusting to fixed incomes. They’re looking to shed, not add to, their collections, and the younger generation isn’t stepping in to replace them.
15 Series: Constructed of solid all mahogany woods, featuring herringbone rosette, matte finish and A-frame “X” bracing. Models include D-15 and OMC-15E. Also acoustic bass guitar BC-15E. John Frusciante of the Red Hot Chili Peppers favors this series, himself owning two vintage O-15 acoustics. Used on solo albums (most notably on Curtains) and albums with the band (like the recent Stadium Arcadium), Frusciante’s O-15s can be seen in action during live performances of songs, including Venice Queen (most memorably at Slane Castle) and Desecration Smile. Chris Martin ofColdplay also uses Martin & Co. 15-series, which can be seen during Mylo Xyloto concerts. Martin also made a line of D-15 style guitars for Guitar Center/Musician’s Friend. The Guitar Center model is called the DSR and has a solid sitka spruce top with solid rosewood back and sides. Musician’s Friend had two models labeled as a simply Custom-D. Both models have a solid sitka spruce top as well as either solid rosewood or mahogany back and sides.
Boss’ CE-1 Chorus Ensemble was the first of these types commercially available, and is the best remembered of the company’s now-archaic looking early range of die-cast metal pedals. The unit was an instant success when it hit the market in 1976, and was quickly snatched up by a range of major players. Andy Summers used the CE-1 with the Police in the late 1970s and early 1980s, and it’s probably most famously heard on the band’s big 1979 hit “Message In A Bottle,” though others made creative use of it too. Shortly after the Boss, Electro-Harmonix offered both its Memory Man Stereo Echo/Chorus—which featured a very good, spacious chorus setting that a lot of player’s loved—and smaller, stand-alone Small Clone chorus. Like the Small Stone phaser before it, the Small Clone had a softer, subtler sound than many of the chorus pedals that would soon flood the market, and it too was a huge hit. Kurt Cobain’s use of the pedal on “Smells Like Teen Spirit” and Chris Novoselic’s bass part on “Come As You Are” from Nirvana’s Nevermind album shows off how it can add a rich, moving, liquid texture to both clean and distorted parts. MXR, DOD and Ibanez all offered popular early IC-based analog chorus pedals, and today every major mass-manufacturer has a unit on the market.

{ "thumbImageID": "CE-24-Electric-Guitar-Whale-Blue/J30024000008000", "defaultDisplayName": "PRS CE 24 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Whale Blue", "sku": "sku:site51500000005478", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Whale-Blue-1500000005478.gc", "skuImageId": "CE-24-Electric-Guitar-Whale-Blue/J30024000008000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Amber Stain", "sku": "sku:site51500000005480", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Amber-Stain-1500000005480.gc", "skuImageId": "CE-24-Electric-Guitar-Amber-Stain/J30024000007000", "brandName": "PRS", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ruby", "sku": "sku:site51500000005479", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Ruby-1500000005479.gc", "skuImageId": "CE-24-Electric-Guitar-Ruby/J30024000006000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Trampas Green", "sku": "sku:site51500000005437", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Trampas-Green-1500000005437.gc", "skuImageId": "CE-24-Electric-Guitar-Trampas-Green/J30024000005000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Dark Cherry Sunburst", "sku": "sku:site51500000005404", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Dark-Cherry-Sunburst-1500000005404.gc", "skuImageId": "CE-24-Electric-Guitar-Dark-Cherry-Sunburst/J30024000003000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000002332", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Vintage-Sunburst-1500000002332.gc", "skuImageId": "CE-24-Electric-Guitar-Vintage-Sunburst/J30024000002000", "brandName": "PRS", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Gray Black", "sku": "sku:site51500000002331", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.01", "priceVisibility": "1", "skuUrl": "/PRS/CE-24-Electric-Guitar-Gray-Black-1500000002331.gc", "skuImageId": "CE-24-Electric-Guitar-Gray-Black/J30024000001000", "brandName": "PRS", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }