For example, Al Schmitt starts with the traditional SM57 close mic, on axis but a little off the centre of the cone. "Then I'll put a really good mic up — maybe a Neumann U67 or an M50 — for the room... It could be anywhere from 15 to 20 feet away." It's worth noting that the M50 is an omni microphone and, although the omni polar pattern is only very occasionally mentioned for close-miking, it makes a much more sensible choice for capturing natural room ambience.
In 2003, The Blues, a PBS-TV series produced by famed director Martin Scorsese, traced the roots of the blues from Africa to modern day society, showing how it inspired other generations of musicians. While in production, Marshall Chess got an e-mail from Chuck D saying that he heard he was doing a film that connected the blues to hip hop and that he wanted to be part of it. Chess was happy to hear Chuck D say "Electric Mud was one of his favorite, most influential albums and that all the early hip hop guys were inspired by it," affirming a connection he thought had happened. In the episode titled Godfathers and Sons, the focus is on the Chicago blues, Chess records and the effect of Electric Mud on Public Enemy, with Chuck D coming to Chicago, led on a historic blues tour by Chess. There, Chuck D's feverant appreciation of EM got him to reassemble the musicians from the sessions to perform material from it for the upcoming 20th Anniversary Chicago Blues Festival. In keeping with the experimental vein of the record, Chuck D added a turntablist (Juice) and a rapper (Kyle Jason) to the band, re-naming the group the Electric Mudcats. Having the material played at a blues festival showed how the album had finally come full circle, from being hated to being respected and enjoyed.
While it is possible to practice on a huge stack, it’s more convenient (and probably more sensible) to practice on a compact, low-powered, versatile practice amp. These little combo amps are one of the most important tools in a guitarist’s tool box, especially for beginners who should avoid ‘dry practice’ (i.e. without an amp) as it encourages bad habits. Many amps can be considered a practice amp, but one of our favorites is the Fender Frontman 10G – a very affordable practice amp that offers 10 watts of power, solid Fender tone and a headphone jack for quiet practice sessions.
If you're looking for one of the best Strats Fender has to offer, be sure to check out the Fender American Professional Stratocaster. Developed with pickup master Tim Shaw, its brand-new V-Mod single-coil pickups are voiced specifically for each position, mixing alnico magnet types to produce powerful, nuanced tones with original Fender sonic DNA. For metal guitarists, have a look at the Jackson JS32 DKA electric guitar. Swift, mean, and easy to play, this guitar offers classic Jackson tone and playability at a more than affordable price. If you're looking for a Les Paul guitar, a great choice is the Epiphone Les Paul Custom PRO electric guitar. If you're ready to step up to a Gibson Les Paul, the 2019 Gibson electric guitar lineup is in-stock.
I have a sunset hellraiser fr. I have been playing for 8yrs and it is by far the best guitar I have ever owned or even played. Next to the ltd models that I was considering the schecter had better quality, feel, and sound at almost HALF the price of the high end lts. The quality of the abalone inlays, the finish (black cherry), the original floyd, grover tuners, 24 fret rosewood board, incredible set neck (you would think its a neckthrough without checking the specs), and the coil tapping emgs is unbelievable. I could go on forever about this guitar's action, sound, feel, quality, looks... I have spent over a 1000$ on a few dif. Guitars and I will never do it again. Ex- zack wylde epi, 2 usa fenders couple mex. 1's, a gibson Linkin Park standard, ltd kh-602, and a really nice jackson dinky style(not sure model) with 3 carvin humbuckers coiltaped just to name a few. Hellraiser is better than all of them. I recommend any of the hellraiser guitars especially with coil tapping emgs.
This aim of this site is to provide high quality SoundFonts (virtual musical instruments in sf2 format) that can be played using a midi keyboard connected to a computer, tablet or smart phone. Emphasis has been placed on real or acoustic instruments particularly piano and other favourites for keyboard players (pads, strings, electric pianos, organs and orchestral) but some SoundFonts here also include high quality guitars, some synths and ethnic instruments. There is also a nice GM set for playing general midi files. The SoundFont format sf2 is widely supported by lots of programs/apps and devices.
So I visit a Guitar Center, wild eyed in wonder at the vast array of choices now available. I start at the bottom end of the Strat food chain and go up. I had to reach a $1500.00 Eric Clapton Signature Model to find a guitar equivalent to the 200 dollar Mexican Strat, my dumbass had given away. (I didn’t think a 200 dollar guitar had any resale value.)
Treble is really a form of gain boost that must be considered while gain-staging our signal path. With good tone, a note should ring like a bell, not slaughter like a machete, and that is accomplished by shaving some attack off the waveform and rounding off the frequency response. A bit off rollback on the tone knob takes you into the ballpark, along with your amp settings (I have a dedicated treble-cut on my AC30 that is necessary to tame my telecaster). Once I am in the ballpark, I use the volume knob to fine tune, and personally I tend to let it be from there, relying on a gain-boost pedal to lift my sound when necessary without altering the tone.
You probably won’t have to do this, but if you do, here’s how to go about it: First, slacken the affected strings and move them to the sides of the saddles. Then take some needle-nose pliers and remove one end of the retaining spring (different styles of bridge will use different types of retaining spring – sometimes there is an individual one for each saddle, in which case you might even need to remove the whole bridge to do this).
“A magnet doesn’t have a tone, per se – you can’t put it to your ear and hear anything. It’s really the engine that drives the coils in a pickup. In a humbucker you’ve got a bar magnet located under the coils; if it’s a Stratocaster or a Telecaster you’ve got magnetic rods that are in the centre. But essentially they’re all doing the same thing: throwing up a magnetic field that the guitar strings vibrate in when they’re plucked.
PRS really took off back in the ‘90s when it seemed just about everyone had swapped out their Les Paul for a PRS. Eventually they capitalized on this trend and made the PRS more accessible by introducing the SE line of lower-budget guitars. But these aren’t beginner’s guitars. Even though they cost less than a standard PRS, they’re still high-quality instruments.
Hi, I’m John Anthony, Playing and collecting Cool Guitars is my hobby, and all of my friends and relatives know it. For the reason, I receive many queries over the phone, email and social media about Best Guitar Recommendation. Which one they should buy now, which will fit them etc. And finally, I created this GuitarListy.com and started putting my suggestions and reviews here.
If you just want one or two instruments from a large SoundFont then follow this procedure. Open the large multi-instrument SoundFont in Polyphone, then select File, New, Name the new SoundFont. Go to the Presets of the original SoundFont, Left-Click the Preset you want and then holding down the Left mouse button then drag it to the Presets of the new SoundFont and let go of the button (the preset is now inside your new SoundFont). Right-Click on the main heading of the original SoundFont and choose Close File. Now simply choose File, Save (or Save As), Close.
I also was amazed how well my Norma FG-7 played..its a parlor size acoustic guitar made of what looks to be all mohagony with a white pic guard kinda cool looking but it was a cheap guitar for the times.it was made in Korea...I acquired it in a small trade ...the bridge was broken on the peghead and luckily both pieces were still there as it still had 4 strings that looked original to me that held the two pieces together...lol....I re-glued the bridge...cleaned her up real well...re-strung her...and wow...I couldn't really contain myself as she sounded as well as a lot of other guitars out there today...although they aren't worth that much...it;s all in how they play and sound...so I believe they are a dandy for sure...but most will be a rebuild! have fun all and keep strummin'
There’s still a lot of confusion over Japanese- and Korean-built guitars from this era in regards to trademarks, who built them, when they were offered, and the connection between them all. However, many of these guitars are high quality and you should always pay close attention when encountering an unknown trademark. If a guitar was produced at one of the aforementioned factories, it could very well be a treasure, just like your Lotus.
The original run of Marshall Silver Jubilee amps were designed to celebrate Jim Marshall's 50th anniversary in music as well as 25 years of Marshall amps. These beautiful sounding (and highly sought after) amps have been brought back from extinction with the Marshall 2525H Mini Silver Jubilee Head, matching cab and combo and have been constructed using the original 2525 diagrams. This means you have all that vintage sounding goodness with modern reliability. You can even switch it from 20 Watt to 5 Watt power so you can go from live sound to home practice easily without ever losing your tone. A great amp for stage, home and studio recording.
This has changed with the introduction of the 2018 Gibson Les Paul Studio, which now has white neck binding. Apart from this cosmetic addition, there are other new features. It has cryogenically treated frets, which means the fret wires have been exposed to extreme cold before they were fitted on the guitar’s rosewood fingerboard. The result? More durable frets that don’t wear out as quickly as regular frets.
Fender California Series Classic This acoustic guitar series will make you swoon with its original Fender body shapes, fully painted tops of solid Sitka spruce and matching Stratocaster-style headstocks. But the California Series Classic models don’t only have the looks; they also have the sound and tonal quality to match. We don’t expect anything less from Fender, and this lineup surely delivers.
The “quacky” tone of the middle and bridge pickups, popularized by players such as David Gilmour, Rory Gallagher, Mark Knopfler, Bob Dylan, Scott Thurston, Ronnie Wood, Ed King, Eric Clapton and Robert Cray, can be obtained by using the pickup selector in positions 2 and 4. The neck and middle pickups are each wired to a tone control that incorporates a single, shared tone capacitor, whereas the bridge pickup, which is slanted towards the high strings for a more trebly sound, has no tone control for maximum brightness. On many modern Stratocasters, the first tone affects the neck pickup; the second tone affects the middle and bridge pickups; on some Artist Series models (Eric Clapton and Buddy Guy signature guitars), the first tone is a presence circuit that cuts or boosts treble and bass frequencies, affecting all the pickups; the second tone is an active midrange booster that boosts the midrange frequencies up to 25dB (12dB on certain models) to produce a fatter humbucker-like sound.
Reverb creates a sense of space, but it also increases the perception of distance. If you need something to appear at the front of a mix, a short, bright reverb may be more appropriate than a long, warm reverb, which will have the effect of pushing the sound into the background. If you need to make the reverb sound 'bigger', a pre-delay (a gap between the dry and wet signals) of up to 120ms can help to do this without pushing the sound too far back, or obscuring it.
After I published that blog post, a number of beginners wrote to tell me they had a higher budget and would actually like me to recommend some better beginner guitars than those you typically find in starter packs. When I dug deeper, most told me they had a max budget of about $300 for the guitar alone, and weren’t interested in all-in-one starter packs. They wanted a really great (but affordable) guitar and wanted to shop for amps and accessories separately. I further confirmed this with a little informal poll on Twitter:
The first National Dobro cast aluminum Hawaiians are probably relatively rare. They were probably only made for about a year, maybe less, from sometime in 1935 until sometime in 1936. By late ’36, the aluminum-bodied Supro laps (and the electric mandolin) had dropped from sight to be replaced by wood-bodied Hawaiians. The reason for discontinuing the aluminum steels appears to be related to the move. The aluminum castings and assembly were done in L.A. By late ’36, National Dobro had substantially relocated to Chicago (though an L.A. office was maintained until mid-’37), and it wasn’t economical to have them shipped all the way to Chicago. It was easier to make wooden bodies in Chicago, so after the move (by late 1936), National Dobro switched to wood-bodied Hawaiians.
Schecter is a really great guitar brand. When I was looking for my electric I searched through many guitar brands most of which are on this list and the only one that really felt right in my hands was the Schecter I play. Its got awesome tone quality, gorgeous body design and fret inlay along with very nice balance and it will stay relatively in tune for up to a few days at a time without the pegs slipping. Great for metal and rock and even really lots of other genres as well. Performs very well it should be at least top 5 if not top 3.
This guitar comes with a 25.5-inch scale, 20 frets, and a 1.68-inch nut. The rosewood bridge features a compensated saddle for a smoother tone and warmer sound. The mahogany SlimTaper D profile neck makes it easy to play even if you’re a beginner, while the Grover machine heads will ensure your guitar stays well-tuned for an accurate musical performance.
Loop-based guitar plugins are slowly moving to the point of obscurity as virtual instrument technology is getting to the point where even string instruments can sound out-of-this-world good and blossom with character. But there still exists some gems out there such as Acoustic Revolutions, which updated to volume two as recently as 2015, doubling the number of loops.
So leaving aside the complexities of exactly emulating acoustic instruments with speaker technology -- which we have all come to accept although no speaker can sound quite as sweet as (or at least not exactly like) the acoustical nuance of a fine wooden stringed instrument, we reach the vast majority of modern music - amplified sounds. Again, stringed instruments are among the most difficult to emulate, if not the most difficult to emulate technologically, because of the vast and infinitely variable set performance possibilities which in turn produce a vast and infinitely variable set of physical reactions. Even if MIDI notation can document the coordinated left-hand/right-hand performance of various pitches, velocities, durations and legato, our VST is strained to faithfully reproduce every possible physical result of every possible combination of performed licks.
i have an old Dorado solid-body electric serial # 0726454 on the neck plate it says STEEL ADJUSTABLE NECK, then the serial number, then made in japan. it has abalone fret markers, and dorado is in abalone in the headstock, blonde finish white-black-white-black pickguard, and a funky trem. i was told once that maybe guild had made this guitar... seems pretty unlikely... and that it retains it's original value, it all seems pretty unlikely... but i don't know... please help!!!
by pedalhaven @airbag3333 has a seriously stacked board! Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️ #pedalhaven #pedalboard #guitarpedals #knowyourtone #ambienttones #pedalboards #pedalnerds #pedalporn #guitar #gearporn #gearnerds #pedalboardpeople #shoegaze #geartalk #guitarsdaily #gottone #tonefordays #guitargear #reverb #gearpost #boardshot
While an acoustic guitar's sound depends largely on the vibration of the guitar's body and the air inside it, the sound of an electric guitar depends largely on the signal from the pickups. The signal can be "shaped" on its path to the amplifier via a range of effect devices or circuits that modify the tone and characteristics of the signal. Amplifiers and speakers also add coloration to the final sound.
PRS, or Paul Reed Smith, guitars are a high-end luxury guitar brand that broke into the rock and roll scene in the 1980s. Famous guitarists such as Trent Reznor and Vince Neil could be seen wielding these beautiful instruments. In fact, that’s probably one of the first things you’ll notice about PRS guitars. They are absolutely stunning. They use high quality wood and only use the best cuts whether it’s their cheapest or most expensive models. Even the slightest imperfections are too much for PRS. Another aspect of PRS to take note of is how they have evolved over the years. PRS is not afraid to evolve their models and most, if not all, of their models have seen changes. They take time and effort to find mistakes in the older models and improve them. From pickups to the neck shape, PRS will change it if they feel they can improve it.
Two more guitars were introduced in 2008. Gibson USA issued the Slash Signature Les Paul Goldtop, modeled after a 1991 Gibson Les Paul Goldtop that was stolen from Slash’s collection in 1999 and never recovered. It features a mahogany body and a hand-carved maple top with Gibson’s classic Bullion Gold finish. Production was limited to 1000. Epiphone introduced a more affordable version of the Gibson model, featuring a traditional Les Paul body with a maple top, a mahogany neck with rosewood fingerboard, and Epiphone’s classic Goldtop finish. Production was limited to 2000.
Almost since the birth of amplified guitars in the early 1930s, players looked for ways to enhance the sound of their electric guitars. A huge variety of guitar effects have emerged from their experiments. These include rack-mounted effects, effects built into amplifiers, and pedal effects. While rack-mounted and built-in effects are separate topics, this article focuses on stomp boxes, which are foot-switchable pedal effects designed for use during live performance.
With that budget you can look about anywhere you choose. Try epiphone, maybe a boutique builder along the lines of your ideal, even a good kit that you rough in and take to a great tech/Luthier to trim finish….but about the Gibson…play em yourself, don’t get upset by a bunch of rumbling that’s largely bad noise. What your hearing is chatter largely perpetuated by their competition. They had a rough patch when they had ALL their imported wood jerked out from under them do to a screw-up of paperwork, wouldn’t at all surprise me if the government changed the rules and didn’t tell anybody(again). You can imagine what Gibson had to do to stay afloat, compromise was inevitable. I’m sure they more than anyone regret that, but you know everyone else in the industry was plenty happy to keep the scuttlebutt going, they ALL hate you when you’re on top. She. I was with strings and things of Memphis, Gibson came out of packing set up beautifully, usually perfectly in tune or nigh on to it. No other maker came close at all. By the way , I’m not a Gibson guy, the only one I’ve had is for sale, I prefer a more modern platform, that’s just my preference. But I still have to give props where they’re due…say, if your interested in an SG ’67 reissue at a good price, hit me up. I’ll give you the skinny on it, all right and wrong, and beat the brakes off any price from a shop!
Then, one weekend his combo got the biggest gig of its career – opening for Tommy Dorsey and his orchestra. Charlie was hot that night, and Dorsey took notice. In one of those rare coincidences, Dorsey’s guitar player had just quit, and the next day Kaman was offered the job. Which path does the son of a construction foreman pursue? The uncertain, fleeting glory of the entertainment industry, or the unknown possibilities of putting craft in the air?
@Umberto – Thanks for supporting Strymon! 🙂 The best place for the Lex is where it sounds best to you. If you like how it sounds in front of your drive pedals, I recommend using it in that location. I also want to note that turning up the PREAMP DRIVE on the Lex can lead to lower effect output volume and recommend using the pedals on-board boost (up to +6dB of boost) to counter this loss of volume.
We’ve decided to give our top choice award to the Martin DRS2 dreadnought acoustic because it’s simply the best all round balance of quality, sound and price, and pretty much anyone reading this should be able to consider it as an option. The only reason you might not is if you’re dead set against a dreadnought body. Otherwise, it’s a fine choice to spend your money on.
Hi Torch, appreciate the work gone into this , fantastically informative piece. Good to see such a following as well , too many Gibson / Fender fanatics out there that dismiss Jap / Asian guitars as inferior. Having played god knows how many guitars over 50 years I've had good and bad in both top and lesser known brands. Started off at 15 years old with a Tiesco ( cost me £15 S/H at the time. lol ). Admittedly it was a piece of junk, but hey it got me started. Just picked up a Strat copy made in China for £10 ( as new condition) Branded Excell , out plays my Aria by a country mile. I have an old acoustic here about 40 years old, cost £62.50 at the time. No place of origin , serial No or anything. Imported by Rose Morris with the brand Avon on the head stock. This baby out plays any acoustic I've ever played, including a couple of Martins, As any guitarist should know a guitar is how it feels and plays not it's name. Nothing wrong with Jap / Asian guitars , could be made in Iceland for all I care it's the guitar that counts. Keep up the good work. Regards and thanks.
Capture ideas and create songs easily with a riff-based workflow, loop recording, automatic track creation (4 tracks), 7 guitar-oriented effects, support for amp models (AmpliTube, PodFarm, StudioDevil and others), 1 InstantDrummer (expandable), and more. Stay in the creative flow with tools that look like gear, and create complete songs without putting down your guitar!
Tube or solid-state? One has the nice warm vintage tone, but the other is just so much simpler and free of hassle. Vox make one of the best hybrid amps, which heats up your guitar signal with a proper 12AX7 tube in the preamp before it becomes amplified by conventional transistors to deliver up to 30 Watts. A warm tone with smooth overdrive, but without the aggravation.
I have had an old beat-up non-functioning norma electric archtop (hollow body) since i was 13(in 1984). A friend gave it to me and said i could have it if i could fix it... well like 20 years later i fixed it! and had the electrical redone for like $60.00. it needed some new parts (basiclly EVERYTHING) but i really wanted an archtop and knew i could fix this one up to sound pretty cool.... what i have found out about these guitars is that they really arent worth anything... i thought this one may have been from the late 50's early 60's so i may be worth something.. but as it turns out most people i have talked to about restoring it says its not worth anything that they were just little copies made in the 50's-60's and bought in the US at probably sears or something.... oh well I DONT CARE i really like it and its made well, so for the sheer vintage look and great feel I LOVE IT!-jj
To load a SoundFont in sforzando you can just drag and drop to the desktop or click Instrument, import and navigate to your SoundFont. Another good free program for PC is MuseScore and loading a new SoundFont is done by putting the file in the default Musescore SoundFont folder then selecting View, Sythesizer, Add and Set as Default. Musescore has basic editing capabilities as well as an excellent sheet music/score viewer and editor.
The only guitars that I have been able to find pictures of that have the little curly thingie on the headstocks have been Kents, Kawais and some kind of no-name guitar that looks like the factory took a red Kent 820 and sprayed black around the edges to create a “redburst” finish. The example above appears to has started as a regular sunburst finish with more red and black added. The neck, headstock, pickups, and body are identical to the Kent 820 except the name ‘Kent’ doesn’t appear on the guitar anywhere. Note that the hardware on it is the same as on the 820 shown. That bridge and tailpiece configuration is a little unusual for Kent 820s. (the 820 there is mine) The bridge and tailpiece on the Kent 823 is the more common configuration.
• How wear alters playability: Fret wear – grooves worn in the frets from pressing down on the strings, depressions created by bending, lowered overall fret height from usage – can all cause buzzing noises to occur at points where frets are located along the neck. Luckily, these problems can typically be addressed by having the frets leveled and dressed several times before a fret replacement job is necessary, since fret replacements are costly.
We specialize in the repair and restoration of stringed instruments and Guitar repair in Nashville, and the surrounding area. Our services provide for stringed instrument repair and maintenance of all makes and models. We also sell stringed instrument related accessories. Contact us for all of your repair and restoration needs. We love rescuing injured instruments, and helping them make music again.
The lotus had a plywood body and was pretty cheap, I wouldn't pay a 100 bucks for one today, if anything. But, back then, it was as good as any, we worked with what we could get. I know we played some excrutiating unison leads (ala Blackfoot, Molly Hatchet,etc) he with his souped up Lotus, me with my Memphis Strat copy, both plugged into my bitchin solid state Crate (looked like a real wooden crate!) amp.
Meanwhile, Royston, due to the loss of a lucrative government contract in one of its other companies, went into liquidation in 1969. As a result, Vox went through a series of owners including a British bank and Dallas-Arbiter. The AC30 continued to be built alongside newer solid-state amps, but in a series of cost-cutting moves different loudspeakers with ceramic magnets began to be used, as were printed circuit boards and solid-state rectification. Particleboard replaced some plywood parts in cabinet construction, and at one point an all-solid-state version was introduced alongside the classic tube-powered model. Rose-Morris, Marshall Amplification's British distributor, bought Vox in the 1980s when their deal with Marshall ended. They tried to reinvigorate the Vox brand, continuing to build the AC30 along with a few other decent modern designs. In 1990 they sold the company to Korg.
Other notable effects include the tube-driven Leslie speaker series, which originally modified the sound of electric organs (such as the Hammond B3) until guitarists like George Harrison (and the Beatles more generally) began to use it for spacey chorus, tremolo, and phaser tones. The classic 60s model, the Leslie 122, was housed in a huge 41-inch wooden laminate casing and comprised of two motors (essentially two electromechanical horns) that had been rotated to create a Doppler-effect-based vibrato. These horns were, in turn, picked up by the dual speaker units. The Leslie 122 wasn’t even built to connect to a guitar, but bull-headed technicians fudged the electronics and made it work anyway. The laminate wood wasn’t just for aesthetics, either: It functioned as a partial enclosure, ensuring mellower tones, and different woods created different vibratos.
The first Merson guitar advertised in The Music Trades appeared in the December, 1948, issue. This was the Tempo Electric Spanish Guitar which listed at $59.50 plus $11.50 for a Dura-bilt case. The Merson Tempo was an auditorium-sized archtop with a glued-in neck, a harrow center-peaked head which looks almost Kay. The guitar was finished in a shaded mahogany with a pair of widely separated white lines around the edges. Available source material is hard to see, but these appear not to have any soundholes. The fingerboard was probably rosewood with four dots (beginning at the fifth fret). This had a typical moveable/adjustable compensated bridge, elevated pickguard and cheap trapeze tailpiece. One Super-Sensitive pickup sat nestled under the fingerboard, and volume and tone controls were “built-in.”
Gold trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
For practice, tone, playback and recording the Cube series is hard to beat. Integrates with iDevices for playing along with music and gives you all the effects and amp sounds you need in one place. The Roland CUBE-10GX Guitar Amplifier Combo is super lightweight and compact making it a great practice amp for home or studio use. If you're in need of a bass amp, the Roland Cube 20XL Bass Guitar Amplifier is a great solution too.
History: Before solid-state technology, Valve amps were manually assembled by large teams of women in conditions that would not be accepted today. For domestic application the majority were not well made. Before manufacture, designs were scrutinised and modified to reduce production cost. Valve count kept to minimum, cheapest components used at voltage rating limits, safety standards almost non-existent.
To simplify the many available guitar body shapes available, we can categorize them into three shapes: double cutaway shape (eg. Stratocaster), single cutaway (eg. Les Paul), and exotic shapes (eg. Flying V). While it maybe considered superficial, having the right guitar shape will add to how enjoyable an instrument is to play and look at - which in turn inspires you to play more and better. In addition to shape, getting a good grip of basic body configurations is essential, here's a primer of the three most common:
Low frets aren't a bad idea, and Carvin is a very good brand for guitar, amp, etc. To me, it seems that the neck shape is going to be very important for you. Double-check what Carvin's return policy is, and if you think it will work for you (whatever it is) then I would totally say go for it! The caveat is that I would bring it to your local music store for them to do the setup, setups and intonations usually need to be done after shipping, and you'd need to have it done if you were changing string gauges anyways, so....
Six slot-headed Classics were offered. The 133/8″-wide GN50 Standard ($65) had a yellow spruce top and mahogany neck and body. The 141/4″ GN60 Concert ($79.50) featured yellow spruce top and Brazilian Imulawood body. The 143/4″ GN70 Grand Concert ($99.50) sported yellow spruce and figured Brazilian fruitwood. The 15″ GN80 Auditorium (4109.50) was the same as the GN70 but with 4″ X 403/8″ dimensions. The 141/4″ GN90 Concert featured yellow spruce top and Brazilian rosewood body, with extra binding. The 14 1/2″ GN100 Grand Concert ($169.50) came in yellow spruce, Brazilian rosewood and ornate inlays. Cases were extra.
Of all the positions GC interviews for, tech has the highest standards and is arguably more demanding in terms of hours worked and product knowledge required than store manager. The tech for the store I worked at frequently worked 60+ hours a week to keep turn-around time to a week or less and his set-ups were so good and in such high demand that the store got an exception to the chain-wide $35 set-up price to charge $50 in hopes of lightening his load/keeping his overtime down, but he still got just as much work as he did before. If you're unsure about the reputation of your local GC's tech, don't be afraid to call the other stores and ask them who the best tech in their district is, because they'll usually be pretty straight forward with you. Most GC sales people have had their instruments set up by their in-store tech at least once and if their tech isn't very good, they'll tell you who you should go to if you want good work done because it's an absolute pain in the ass dealing with a customer whose instrument wasn't set up right when the tech is gone for the day and having to deal with the tech's fuck-up.
Whether you have your sights set on a dreadnought acoustic or a classic Squire Strat, the guitar value packages found here consist of everything a player needs to make their guitar learning experience an exciting and enjoyable one. From Fender, Dean and Alfred to Jasmine, Ibanez and Martin, all the big names are here. You'll have no problem finding the perfect guitar value package that pertains to your specific music tastes.
Paramount: Around 1930 Martin made about 36 guitars with strange construction. A style 2 size body mounted into a larger rim and back of rosewood, small round soundholes around a "lip" that joins the outer rims to the inner rims, no soundhole in the top, 14 frets clear, dot fingerboard inlays to the 15th fret, rounded peak peghead with standard Paramount banjo peghead inlay, banjo-style tuners, four or six strings.
Whether you are an acoustic or electric guitar player one of the simplest ways you can add some dynamic or sonic change to your worship set is by stepping on an effects pedal at appropriate moments. However, if you are new to the world of pedals there seems to be endless choice of single or multiple effects units (and no, you don’t need as many as are in the photo!). Whilst multi-effects offer loads of sounds in one box, they can be hard to programme and difficult to adjust quickly on stage. There’s a million things written about effects pedals out there in Googleland but if you’re brand new to this here’s a potted overview of some of the most popular types.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
Whether it costs $100 or $1000, the build quality should feel worthy of the money. Naturally with budget models you will find more laminated woods compared the solid woods and exotic materials used in expensive guitars. However, a good model will have laminates that are put together securely and cleanly, with no excess glue or rough spots. Even a good budget guitar will look and feel great.
This is an American Fender Telecaster electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jangly indie sounds or clean country sounds but can be very rocky with more distortion added. This guitar is also a classic that has been used in alot of types of music.
An incredible acoustic baby right handed guitar, natural in color without a case. It has a solid wood and Nato fret board that constitutes of 19 frets. It also has an awesome mid range boost, has adjustable truss rods, is light in weight, and is easy to operate, making it suitable for an entry level guitarist. The prices are relatively fair, ranging from INR 9,990. You can get more details on the product by clicking on the following link:
Modern electric guitars most commonly have two or three magnetic pickups. Identical pickups produce different tones depending on location between the neck and bridge. Bridge pickups produce a bright or trebly timbre, and neck pickups are warmer[when defined as?] or more bassy. The type of pickup also affects tone. Dual-coil pickups sound warm, thick, perhaps even muddy; single-coil pickups sound clear, bright, perhaps even biting.
1) The tuning keys (machine heads) are as bad as it gets and if you're planning on keeping this guitar for a while and making it really workable plan on changing them ASAP and throwing the others away as far as you can throw them - Shame on you Yamaha, you could have at least used some half decent tuners!! These are an insult to your good name. So I replaced mine with Grover Sta-Tite V97-18NA (with brass colored gear) which are the best tuners "for the money" ($40) for any guitar especially for this one. However, be aware that you will also need to replace the Yamaha bushings because the I.D. is too small for the Grover post and, unfortunately,the Grover bushing O.D. is too small for the holes in the Yamaha headstock. The correct bushing that will allow an easy proper fit of the Grover tuning pegs to the Yamaha APXT2 is Kluson MBG65N or B bushings (Google it). If you elect to do this instead of letting your friendly Luthier do it, be advised that when you knock out the stock Yamaha bushings, since they're press fit it may have a tendency to split the wood on the top of the headstock. This one modification will bring this guitar from the level of a toy trying to be a serious contender to the best little guitar that money can buy.
When connecting more than one pickup, it’s important to follow the manufacturer’s color codes and wiring diagrams so that the phase relationship is correct. The phase relationship of a pickup is determined by the winding direction of the coil and the polarity of the magnets. The two coils of the traditional humbucker are connected in series with the phase relationship shown in Fig. 1. Most modern Stratocaster® style guitars with three single-coil pickups are supplied with a reverse wound/reverse polarity middle pickup for a parallel hum canceling effect when the guitar is switched to a two pickup position (e.g. neck & middle pickup together) as shown in Fig. 2.
Three full steps from standard tuning. Used by Dream Theater, Adema, Asking Alexandria on From Death to Destiny and The Black, Boris, Cannibal Corpse, Morbid Angel (on several songs starting with their album Covenant), Father Befouled, Sepultura, Jeff Hanneman of Slayer (on "War Zone" and "Here Comes the Pain" from God Hates Us All and "Not Of This God" from World Painted Blood. Kerry King used a 7-string for those songs), Mutoid Man (Stephen Brodsky started using the tuning during the recording of the Helium Head EP to fill in the low end of the sound, in an attempt to make up for their lack of a bassist at the time), American Head Charge, Nickelback (on "This Means War" and "Gotta Get Me Some" from " Here and Now" and Nevermore (when band switched to 7 strings).
This is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal as opposed to using transistors. A vast majority of vintage guitar amplifiers use tubes, which help to give them a warmer, sweeter tone. They are available in combo amps and in amp heads, which then require an external speaker cabinet to produce sound.
Taylor’s 214ce Grand Auditorium acoustic guitar has undergone a few changes over the years. One of the latest improvements added in 2017 concerns the wood used for the body. Because of the restrictions on the importation of rosewood, Taylor no longer uses it for their 200 series of guitars, which the 214ce is a part of. Instead, the company used the next best wood for a great, balanced tonal response: Hawaiian koa.
I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!
Since 1994 The Music Zoo has been a trusted source for musicians around the world. We've located guitars for Slash, sold guitars for Steve Miller, held performances by major artists like Steve Vai, built thousands of customer relationships, and helped countless enthusiasts find just the right instrument. Today we look forward to finding your next guitar!
If you really want ultimate tone and control, it’s hard to beat a w/d/w type rig. You have ultimate power and control over your tone in a rig like this. Of course, a rig like this probably isn’t going to fit in the trunk of your car! But the massive tones and ultimate control will have you running out to buy a bigger vehicle (or hiring roadies). Don’t say I didn’t warn you....
We also decided to test a separate group of smaller guitars with scale lengths (the distance from the string nut at the top of the neck to the bridge that supports the strings on the body) in the range of 22 inches, as compared with 24.75 to 25.5 inches for most full-size electric guitars. These models may be more comfortable for kids because their smaller hands won’t have to stretch as far, and many adults also like them because their compact size makes them easier to travel with.
With modern recording systems, track counts aren’t usually much of a limitation any more. In addition to a mic’ed up amp or a feed from pedals into your interface, try to also capture a clean feed of the guitar signal if your amp or pedal board allows a direct output to be routed. If you record this as well as the amp / fx feed, you have another option to re-process the guitar recording in software if you decide the original feed isn’t right.
Eight-string electric guitars are rare but not unused. One is played by Charlie Hunter, which was manufactured by Novax Guitars. The largest manufacturer of eight- to 14-string instruments is Warr Guitars. Their models are used by Trey Gunn (ex King Crimson), who has his own signature line from the company. Similarly, Mårten Hagström and Fredrik Thordendal of Meshuggah used 8-string guitars made by Nevborn Guitars and now guitars by Ibanez. Munky of the nu metal band KoRn is also known to use seven-string Ibanez guitars, and it is rumored that he is planning to release a K8 eight-string guitar similar to his K7 seven-string guitar. Another Ibanez player is Tosin Abasi, lead guitarist of the progressive metal band Animals as Leaders, who uses an Ibanez RG2228 to mix bright chords with very heavy low riffs on the seventh and eighth strings. Stephen Carpenter of Deftones also switched from a seven-string to an eight-string in 2008 and released his signature STEF B-8 with ESP Guitars. In 2008, Ibanez released the Ibanez RG2228-GK, which is the first mass-produced eight-string guitar. Jethro Tull's first album uses a nine-string guitar. Bill Kelliher, guitarist for the heavy metal group Mastodon, worked with First Act on a custom mass-produced nine-string guitar.
You might be playing guitar in a cramped garage or a poky bedroom – but it’ll sound like you’re gigging a cathedral when you step on a quality reverb pedal. Reverb brings a sense of space, depth and drama to even the most basic guitar parts, and as this video shows, few effects deliver more atmosphere for less effort. Using the BOSS RV-5 as our demo model, we’ll show you just how flexible reverb can be, running through key controls that adjust brightness, volume and more. Then, we’ll show how your playing can benefit from three different reverb types, whether that’s the vintage sound of spring reverb, the rock-club chug of room reverb, or the stadium-sized shimmer of hall reverb.
One of the most widely used guitars in jazz, the ES-175 is a semi-acoustic, hollow-bodied archtop that comes equipped with two humbucking pickups. The ES-175’s deep body produces the thick, dark sound beloved of jazz guitarists and the thin neck allows for fast chording and soloing. The bridge pickup is capable of producing a less jazzy, thinner sound, and ES-175s can be used in blues and rock.
Ibanez LGB30 George Benson Electric Guitar New from$1,099.99Only 2 Left!or 12 payments of $91.67 Free Ground Shipping ESP LTD KH602 Kirk Hammett Signature Electric Guitar New from$899.00In Stockor 12 payments of $74.92 FREE 2-DAY SHIPPING PRS Paul Reed Smith SE Zach Myers Semi-Hollowbody Electric Guitar New from$779.00In Stockor 12 payments of $64.92 FREE 2-DAY SHIPPING Epiphone Limited Edition Matt Heafy Les Paul Custom-7 Electric Guitar, 7-String New from$949.00In Stockor 12 payments of $79.09 FREE 2-DAY SHIPPING See All Signature Model Electric Guitars
Many recordings feature multiple guitar tracks playing simultaneously, but sometimes this can clutter up the mix. Another approach is to make each part sound distinctive by using different combinations of guitars, amps and effects. Panning the guitars to various areas of the stereo spectrum will create space for each part, while subtle use of ambient effects can create a sense of depth. EQ can be used to help guitars blend together. Try cutting certain frequencies from one guitar track and boosting those same frequencies in another.
Travis adapted the syncopated rhythms of Ragtime Piano music to the guitar – (the term syncopation refers to deliberately playing off the regular beat). Travis would pick the strings alternating the bass note on the low E and A strings. This style of finger picking was given the name ‘Travis picking’ and went on to influence Chet Atkins and Scott Moore’s ‘Rockabilly’ sound.
Boss's MS-3 is an ingenious pedalboard solution that gives you programmable loops for three of your own pedals and a host of built-in effects - 112 to be precise. The MS-3 can switch your amp channels, adjust external effects and integrate with MIDI-equipped pedals. Then there’s the built-in tuner, noise suppressor and global EQ. It’s as if Boss looked at everything players could want from a pedalboard controller and crammed it into one compact unit. There are 200 patch memories for saving your expertly tweaked sounds, each with four effects or pedals that can be switched in or out at will, or four presets that can be instantly recalled. The MS-3 is rammed with pristine modulations, all the essential delay and reverb types, as well as a load of Boss specials, such as the dynamic Tera Echo and sequenced tremolo Slicer. Then there’s the niche yet useful effects, such as an acoustic guitar sim, Slow Gear auto fade-in and that sitar sim you never knew you wanted. The drive tones don’t live up to standalone pedals, but for most players, we’d wager those three switchable loop slots will be used for analogue drives, with the ES-3 handling modulation, delay and reverb. A genuinely exciting pedalboard development.
The palm mute is a playing technique for guitar and bass guitar, executed by placing the side of the picking hand below the little finger across the strings to be plucked, very close to the bridge, and then plucking the strings while the damping is in effect. This produces a muted sound. It was popularized by Black Sabbath in the song "Paranoid". - winner333
Some of the more distinctive specifications include, the headstock shape, tuners, neck and fretboard, bridge, and pickups and electronics. The headstock shape is based on PRS’s trademark design, but inverted to both accommodate Mayer’s playing style and also to keep a consistent length of string behind the nut, which makes staying in tune easier. The tuners are a traditional vintage-style, closed-back tuner, but with PRS’s locking design. The neck shape was modeled after 1963/1964 vintage instruments, and the fretboard has a 7.25” radius. The moment your hand grabs this neck, it just feels right. Like the tuners, the steel tremolo takes a classic design and incorporates PRS’s trem arm and Gen III knife-edge screws. The bridge on the Silver Sky is setup flush to the body in the neutral position so that the tremolo bridge only goes down in pitch. By keeping the bridge in contact with the body, the guitar itself is acoustically louder, which improves the signal to noise ratio of the single-coil pickups. The 635JM single-coil pickups are very round and full, with a musical high end that is never “ice-picky” or brash.
In a very basic sense, your pickups create a magnetic field that is disturbed when guitar strings are vibrated above it. This, in turn, converts the vibration of the guitar strings into a current. The current is then sent through to your output jack where the signal then passes through your lead into your amplifier, where it is amplified. Different gauge strings vibrate at different rates e.g. an A string will typically vibrate at 440 cycles per second (440 hertz) which creates a current of 440 hertz in the pickup.
Dyna Gakki began production in 1972 in the city of Nagano, Japan. They manufactured guitars for Fender Japan and Greco, so they couldn't have been a terrible manufacturer as Fender is very choosy about outsourcing their product. Dyna may have been a source for Japanese manufacturer Yamaki. Dyna also produced the infamous Ibanez badges for a short period of time.
The first thing is to adjust height. If you have the first type, you will need a flathead screwdriver. The two posts holding the bridge have flat slotted heads showing at either end. You can turn these clockwise to lower the strings or counter-clockwise to raise them. Find the string height that suits you. For an electric guitar, it will be about 1/4" off of the neck or lower. Get the strings as low as you can for comfort, but be careful that your frets don't start buzzing or that the strings are not coming into contact with pickups or any other parts. If this happens, your strings are too low. If the bridge is the second type, you will need a very narrow Allen wrench to adjust the saddles; you will find the Allen heads on either side of the saddle top.
At the end of the day, Squier has come a long way in this pas decade. They upped their game in terms of build quality as well as selection. If you are just starting out, Squier is one brand you can trust to give you a perfect tool for the job. If I was starting all over again, I’d go with Squier by Fender Classic Vibe 60’s Stratocaster in a heartbeat.
Although acoustic guitars have recently surpassed electrics in popularity, the electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. If you want to play in a band, you’ll probably want an electric guitar. You’ll also want one if you want to develop the ability to play melodies and solos because electric guitars are, in general, better designed to accommodate fast fingering and more able to stand out in a musical group.
Gruhn Guitars: If you're looking for a convenient appraisal that can be done online--something along the lines of what May Music Studio used to do--Gruhn Guitars offers an appraisal service. You must first send information and pictures of your guitar according to their guidelines. You must also include a payment for the appraisal fee, which varies depending on the instrument.
There are, by the way, a number of discrepancies between Japanese Teisco and American Teisco Del Rey literature from 1966. Many of the older models continued to be promoted in Japan, but not in the U.S. Virtually all guitars in U.S. literature are also seen in Japanese catalogs. This does not mean that just because W.M.I. did not promote certain models, they were not still available in America. Many may have gone to Sears as Silvertones, and it’s possible that W.M.I. still brought in guitars other than those in its catalog.
Repairing pickups. You do not have the option of repairing and salvaging the pickup beyond re soldering the coil wire. If you do this be aware you are not repairing but instead customizing. However, to repair or restore pickups start by re-magnetize the coil magnets using strong earth magnets. If you need to re-solder the coil wire, unwind the pickup tape and properly re-solder in the wire appropriately.
Martin is a famous America-based company known for is a variety of impressive electric and acoustic guitars. Their guitars are predominantly manufactured in Pennsylvania and Nazareth. The history of Martin guitars dates back to 1833. From then on, Martin has managed to maintain classiness and quality in their guitars to satiate the thirst of pro players in America.
Like effects pedals, multi-effects processors are used to modify and alter the clean signal of your guitar to produce a large variety of effects (reverb, wah-wah, overdrive, distortion, chorus, etc). Unlike a simple pedal that gives you one or two options for modifying tone, a multi-effects processor has a full load of effects and sounds that allow you to play music with a rainbow-colored tonal palette. There are processors for modifying guitar, bass, and even units for vocalists with pitch-correction tools and harmonizer effects.
There’s an old joke in the technology industry: If a product has a problem, simply sell it as a feature. The electric-guitar-effects industry is no different. Music has often thrived on transforming faults into influential sound effects. Before professional studio production enabled granular tweaks in sound, standalone guitar effects emerged from deliberately converting hardware faults—often caused by the limitations of amplifiers—into positive features. By the end of the 1970s, it had become impossible to imagine how R&B, blues, and rock could have existed without these fortuitous mistakes.
When playing the electric guitar, you’ll have to simultaneously use both hands. One hand will be responsible for fretting and the other hand will be responsible for strumming or plucking. Depending on which is your more comfortable side and whether the electric guitar is designed more for one side than the other, it will impact your play style and music quality.
Vintage Gibson Les Paul Special model, introduced in 1955 This 1957 model is killer.Utilizing the Junior’s solid Mahogany body with single cutaway shape but finished in what Gibson called Limed Mahogany which appeared white on black and white television sets which gives it the nickname of "TV Special"A neck pickup with accompanying volume and tone circuitry was also added making the Special an affordable but still professionally playable instrument. The Special was sold in this configuration until 1958 . Gibson’s surviving shipping records indicate approx. 1,452 Les Paul Specials were shipped in 1957. MORE HERE.
If you think you might build more than one of a pedal, it’s helpful to keep a list of your preferred parts and their specifications in a spreadsheet. In manufacturing this is called a BOM (Bill of Materials). Some online stores will let you import a BOM direct into their web store and will build a purchase order for you based on the information. It’s a big time saver each time you need to order parts, and lets you compare different vendors stocks easily.
Back in the good ol’ days, guitarists had to crank their amplifiers to eleven in order to obtain a nice and creamy distortion. Today, this is no longer the case. Thanks to overdrive pedals, you can basically drive every clean amp into overdrive – at any volume – and choose the amount of gain and shape the tone precisely as desired. The overdriven or crunch sounds are commonly used for rock, to slightly get that “breakup” clean tone or to play blues licks and solos. During the last two decades, guitarists found out that overdrive pedals are also perfect for boosting the crunch channel of their amps into total distortion – a technique often used during guitar solos, to give the sound that extra weight and girth – or, as with the famous Tubescreamer, to tighten up the bass response of the amplifier gain channel. The Boss SD-1 is a very popular choice for overdrive pedals, capable of great sounds. The legendary TS9 by Ibanez is also worth a mention – even considering that it’s available in Mini and Deluxe formats. And while we’re at it, why not give the Harley Benton Ultimate Drive a try? This little screamer can boost your amp into full overdrive at a very competitive price.
Rock music evolved from Blues, the music of the streets. Most musos’ of the 50s and 60s were poor and guitar amps made to a budget. Some but not all technical principles of amp designs were well thought out. Fender and Marshall were the dominant and most copied brands. The powerful amps had 4 output valves in parallel push-pull and gave approx 60 - 100Watts.
Other Ovation innovations include composite tops and multiple offset sound holes on guitar tops, pioneered in the Adamas model in 1977. Kaman Music has also sold budget guitars—and even mandolins and ukuleles—based on similar design principles to the Ovation such as the Korean-built Celebrity series and the Korean or Chinese-built Applause brand.
While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:
Finally, we come to our time-based (and space-based) effects group. This includes reverb and delay. Both are forms of the same effect with reverb being a much faster version of delay. All they do is take the input and "smear it out" while reducing the volume over time. Not only does this create an extremely complicated signal that other effects won't react to well, but the variances in volumes these create would further confuse the previous pedals.
By placing two (or more) mics at different distances and angles from your speaker cab you will get two different sounds - and more variation will of course depend on whether these are the same model of mic, or different models. Mics placed further away will capture more room tone, and close mics are more upfront. Angled mics offer a less direct sound. Capture both feeds and blend or select from the two after recording.
Even by the mid 1970s costs to manufacture instruments in Japan were rapidly rising. Labor was still cheaper than in the USA (it isn't anymore), but real estate, raw material, fuel, transportation costs and virtually all other manufacturing costs were fully as much if not more in Japan as in the USA. The Japanese were able to compete in the international market due not only to low labor costs at that time but also due to highly efficient manufacturing techniques and the fact that their low-cost workers were skilled and highly motivated.
The movement to all-transistor amplifiers probably followed hot on the heels of the hybrid amps of 1968. The 1971 Univox catalog features a new, updated line of tube amps, but also has a little offset-printed flyer showing the Univox A Group of solidstate amps, which probably debuted a year or two before. These had black tolex-covered cabinets with vinyl handles, black grillcloths surrounded by white beading, and, on some, corner protectors. On amps with front-mounted controls, the logo had changed to wide, block, all-caps lettering printed on a metal strip running across the top of the grillcloth just under the panel. Combo amps with this logo treatment included the U-150R and U-65RN. The U-150R ($177.50) offered 20 watts of power running through two 10″ speakers, with reverb and tremolo, three inputs, and six control knobs. The U-65RN ($110) had 15 watts, one 15″ speaker, reverb and tremolo, with three inputs and five knobs. Joining these was the UB-250 ($150), a piggyback bass amp with 20 watts, 15″ speaker cabinet, two inputs, volume and tone. The U-4100 Minimax ($299.50) was a bass combo amp with 100 watts pushed through a 15″ speaker. Controls were on the back, with two channels for bass and normal. This had a rectangular logo plate on the upper left corner of the grille, with block letters and a round bullet or target design.
Originally, distortion of the guitar signal happened accidentally when tube amps were turned up too loud. While distortion was first considered undesirable, players soon came to recognize that a distorted signal increased the amount of sustain they could get out of each note. This essential discovery created a fundamental shift in guitar soloing styles to include extended notes such as those produced by a wind instrument or organ. Used on rhythm guitar parts, distortion thickens up the signal and allows for a much heavier, chunkier sound.
The humbuckers were smaller than typical, with metal covers and two rows of exposed adjustable polepieces. The pickups and three-way were mounted on a small black/white pickguard, with knobs on the body. Two jacks for mono or stereo output were mounted on the side of the lower bout. The two-octave unbound rosewood fingerboard had dot inlays. Early Preachers had “Preacher” engraved on the lower pickguard and a bridge/tailpiece assembly was similar to that on the Breadwinner/Deacon, with more metal and less plastic. Other versions are seen without the engraving and all-metal bridge/tailpieces, indicating the model evolved. Though no information is currently available on when the transition occurred, based on evidence from later UKs, it happened late, possibly around 1980.
Hi Learmonth! I always recommend Yamaha acoustics for beginners. The FG and FS Series both offer affordable, quality instruments. The question is what size you need to get. Some smaller kids do better on small-bodied guitars like the Yamaha JR2. Of course he would outgrow this by the time he is a teenager, though it would still be a cool guitar to have around. If you feel he can handle a full-size guitar look at something like the FG700S. It's a great starter guitar that will last him a long time, as long as he takes care of it. Good luck and let me know if you have any more questions.
Theory - These sessions will be devoted to investigating how the fretboard works, how strings and notes relate to each other, what chords are made up of etc. A lot of theory time will be spent reading and analysing diagrams and your guitar's fretboard. This aspect is for understanding how music works on the guitar, to map out the fretboard in your mind so you can later apply the physical techniques with confidence. If you're serious about getting good on guitar, you need time devoted to theory.
The Ibanez AFC95 extends the Japanese manufacturer’s reach well into the future whilst remaining true to its roots. The elegantly styled single-cutaway hollowbody is equipped with forward-thinking appointments that extends the tonal versatility of the hollowbody further than ever before. Sublime hardware includes a delightfully nimble ebony fingerboard, whilst the ebony bridge and AFC tailpiece optimise intonation and sustain superbly.
It’s important to remember that these setups are not set rules that must be followed. You can get a variety of unique sounds by placing your effects in unorthodox locations. It’s common to run into that special sound that came about as a ‘happy accident’ when setting up your effects. Using these suggestions, you can build up your own pedalboard to suit your individual taste.
If a love of flamenco and salsa music sung by the Gipsy Kings brought you to the best classical guitar, then you are going to want to read this review. The Cordoba company, as you can now see, has quite the reputation for quality guitars, and their GK Studio Negra left-handed model—a Gipsy Kings signature instrument—could easily be the right one for you (no pun intended).
: I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.
An electric guitar works on the principle of electromagnetic induction. This means that an electric guitar has electromagnets in its system which generate magnetic fields. Apart from this, an electric guitar has an amplification system which amplifies the sound waves generated by the guitar’s string. It is this combination of electromagnetic induction and amplification system that makes an electric guitar run.
Although PRS offers a range of affordable models (the Korean-made SE Series) and the mid-range S2 Series, the brand is still best known for its elegant high-end signature and custom guitars which are a prominent part of the modern rock and metal scene. As such, PRS boasts a full roster of artists playing its guitars, including John Mayer, Mark Holcomb, Mike Oldfield, Dave Navarro and Mark Tremonti.
I've played a Telecaster for years exclusively However i have tried playing a Les Paul and i remember thinkin how much easier it was to play. What guitar would you say was the easiest to play? I know it can be subjective but it seems to me that metal guitars are designed to play fast so they are made easier to hit notes etc. I'm guessing something like what steve Vai plays would be so easy and nice to play regardless of tone etc.
I love this shop. I have spent a good amount of $$$ at quite a few guitar shops in Seattle. I won't name them, but I swear to god there's one that I walk into and every time I walk in I'm a new customer. No one remembers me there, I mean fuck, one dude is from the same city as me on the east coast. But the guitar store? They always remember me and treat me like a guest even if I'm not there to buy shit. Everyone there is a genuinely good dude. They're all honest too, which can be hard to find in this industry. I took my guitar in for a check up and they told me doing anything to it would be unnecessary. They could have easily charged me $80 for a set up and taken my guitar. They definitely made a loyal customer out of me. Will definitely be going there for anything from new picks to a new amp.
The strings fitted to the guitar also have an influence on tone. Rock musicians often[when?] prefer the lightest gauge of roundwound string, which is easier to bend, while jazz musicians go for heavier, flatwound strings, which have a rich, dark sound. Steel, nickel, and cobalt are common string materials, and each gives a slightly different tone color.