In general, using an acoustic electric guitar expands your possibilities. You are no longer limited to the volume the guitar itself is capable of producing, which can come in pretty handy at times, nor having to mic an amplifier either. With an acoustic electric, you can perform in just about any venue that's worth its salt, without dealing with close miking and a lot of post-processing like equalizing out the boomy low-end.

It’s safe to say a wah-wah pedal will be your first stompbox if it’s not already. The wah is a sweepable fixed bandwidth filter that has a treadle you rock back and forth producing vowel-like inflections. The phrasing possibilities are only limited by the player. These days, you have an array of major as well as indie pedal builders who make incredible wah pedals such as Dunlop, Vox, Fulltone, Teese, Xotic, and Wilson Effects.
I found a Decca guitar lying in my woodworks shop at school, and my teacher let me take it home. My friend and I have been restoring it, and we nearly have it finished, the only thing missing is the tremolo spring. However the model of the guitar is kind of odd as we have not found any record of what type of guitar we own. Its a double cut-away archtop, with a tobacco sunburst and 3 single coil pick ups. We have looked everywhere and haven't been able to find any record of a 3 pick up Decca guitar. We're still looking...
The first “production” electrics were made by Stromberg-Voisinet in Chicago in 1928 under the direction of Henry Kay “Hank” Kuhrmeyer, soon to be president of the company which would shortly be renamed the Kay Musical Instrument Company. S-V developed the first commercially viable (more or less) pickup and amplifier. The pickup – we’ve yet to see one so an accurate description is impossible at this point in time – was probably a quasi-transducer which probably adapted phono cartridge or telephone receiver technology. It was placed on S-V’s two-pointed Venetian-shaped acoustic guitars and was greeted with great ballyhoo in the music trade press. The amp was produced before the development of preamp tubes, and was undoubtedly very primitive (there is no mention of even volume controls), and probably not particularly loud (though, of course, listeners had nothing to compare). Apparently, the reality didn’t live up to the hype, because Kuhrmeyer later suggested than only a few hundred of these guitars were actually made, and mention of them evaporates after 1928, likely done in by a combination of lack of performance and the upcoming Great Depression, which descended in 1929.
I personally use Vegas, Sonar, and REAPER. I would not recommend Vegas or Sonar for live playing, if for no other reason than both have crashed on me during recording sessions, and I do not easily forgive that. REAPER (Audio Production Without Limits) never, ever crashes. It’s not as full featured as some DAWs, but what it does, it does well. I use it for all my recording.
The name Epiphone stands above all for very good, less expensive alternatives to the unfortunately always quite expensive Gibson guitars. Gibson tries to offer good alternatives to their Gibson branded Instruments through its subsidiary Epiphone. Les Paul, SG, Explorer and other models. Todays Epiphone program includes electrical, half- and full-resonance guitars, basses, acoustic and electro-acoustic instruments, banjos and mandolins. Epiphone stands on the one hand for innovative ideas in guitar manufacturing and on the other for successful replicas of instrument classics that are affordable for everyone.

Actually it was a rolling stone interview, I don’t remember the exact issue but the reply was Rory Gallagher. I’ve also heard it was Phil Keaggy which is unlikely because he was relatively unknown when Hendrix was alive. I’ve also heard it was Terry Kath, Billy Gibbons, and Eric Clapton. I do know that Hendrix said his favorite guitar player was Gibbons, because he just couldn’t get that sound that Billy gets. As for the Quote……. maybe it’s just folklore… The most likely correct answer is Rory Gallagher though…. it’s even referred to in Rory Gallaghers biography and the actual issue of the rolling stone interview is listed in there. I’ve never heard anyone say that the quote was with Jerry Reed though. But, Jerry Reed is an AMAZING guitar player. He actually wrote alot of Chet Atkins material. As for misquoting Hendrix you may not want to be so quick to point fingers…. I’m pretty sure yours is wrong. 😉

#A1056:Another super rare piece from Guitars West! This little number found its way across the pond and onto our doorstep. A very early VamPower 70's 100 watt P.A. 6 channel input head. With speaker channels, one 4 ohm-100w-#1 & 2 input, one 8 ohm-100w-#3 & 4 input, one 15 ohm-100w-# 5 input, two 8 ohm-50w-# 1 & 2 input, two 15 ohm-50w-# 3 & 4 input.
Gibson guitars are the produce of the Gibson Guitar Corporation which produces guitars and other musical instruments which sell under a variety of brand names. Gibson Guitar Corporation was founded in the year 1890 by Orville Gibson in USA. It is a mass producer of the Guitars and is the most widely used guitars in the world. Gibson guitars are exported all over the world and are considered as one of the best guitar brands in the world. Gibson Guitars actually are the giant guitar company which also owns other brands of guitars. Some of the popular brands which are owned by Gibson are Baldwin, Epiphone, Kramer, Maestro, Slingerlands etc.
Excellent explanation! One thing that no one has touched on, yet is the physics of the high frequency components (mentioned above). When you clamp a string at both ends and pluck it it will have a fundamental frequency of waving back and forth based on a) it's length b) it's thickness and c) how tightly it's stretched. All wavering strings, though will have additional waverings. These are referred to as overtones. The first overtone will be a doubling of the frequency and the next a trippleing and so forth. Each of these overtone frequencies contribute to the rich, complex sound of the instrument. Here's a good explanation with pictures. Note the location of the frequency nodes in relation to the placement of the pickups.
I started out doing pretty much what I do now on an acoustic and transferred it to electric when I was able to get a paper route and buy a crappy red electric guitar. I knew the value of working stripped down and I still do, although in this day and age I've made a lot of records with different sounds. I must say I really love what technology can afford you.
Scott Walker began tinkering with electronics at an early age. In his early teens he began playing guitar and experimenting with pickups. In the Spring of 2001 he attended the Roberto-Venn School of Luthiery.  Following graduation he accepted a job with luthier Richard Hoover, of Santa Cruz Guitar Company. At Santa Cruz Guitar Company his specialty became hand-carving necks, and he also began to take on other responsibilities, including the position of shop foreman. At this time he began developing an electric guitar for the ‘21st century.’ After meeting musician Barry Sless, he began to develop an instrument that had the broadest tonal range available. After five years of R&D he began offering his guitars to the public. During his pursuit to develop an electronic package to incorporate into these instruments, he began working with electronic wizards Peter Miller and John Cutler. This collaboration resulted in the current design now found on all ‘Walker Guitars.’  For more information please visit:
I have a Kona Signature Acoustic with beautiful inlays in the wood. I believe the body is mahogany, decent resonant tone, and once I shimmed up the saddle bridge (which technically should have been replaced all together due to notching), sounds better than my Martin in many ways, where it better distributes the low, high, and mid-range tones. The Martin is too bassy sounding, but have ordered new bone bridge saddle, which hope it improves the cheap plastic one it came with...
Once you have the height of the strings over the fretboard adjusted, you can fine tune the intonation setting with an electronic tuner. If the saddle locations are already close to where they should be (based on your measurements), your saddle height should not have to be changed very much as you make the final intonation adjustment. If this is a tremolo bridge and it is blocked, tension the tremolo spring claw to the correct setting( this adjustment will be the subject of a separate article).
Most newbie guitarists want a small amp that sounds good but doesn’t cost too much. The amps listed above are that and more. However, there are some guitar players who mean business from the beginning, and won’t want to waste time on small beginner amps when they have the resources and ambition to grab an intermediate or pro-level amp. If you know you are going to stick with playing guitar, and if you can justify it in your budget, that’s not a bad idea.

In many ways the Fender Stratocaster is the antithesis of the Gibson Les Paul style guitar. The first thing I notice when I sit down to play a Strat style guitar is the fantastic body shape - it's just a perfect fit. The Strat typically has a scale length of 251/2 inches which is considerably more spaced out than the Gibson. While a Gibson has the warm humbucker tone, a vintage Strat tone is thin and sharp, almost cutting. To achieve this there are three single coil pick-ups with staggered coils which equalise the prominence of all the strings. The humbuckers Gibson use are basically two single coils wired parallel to cancel some of the background hum that the Strats suffer from. In doing this however they loose some of the higher frequencies which give the Strat their sharp, jangling tone. The massive Fender scratch plates were originally used to protect their pick-ups from picking up too much background buzz and they've become one of the Stratocaster's most distinctive features. The Strat also has the tremolo bar which the Gibsons lack. For the uninitiated the name 'tremolo' is a bit of a misnomer as the 'whammy' bar actually allows you to pitch bend by tilting the bridge back and stretching the strings while the 'tremolo' effect usually refers to changes in volume.

The first popular humbucker was introduced by Gibson in 1955, and the world of music was never the same again. In general, the humbucker offers a thick, rich tone, with a medium to high output, which is why they are staple of heavy rock and metal (although equally popular in jazz music). You will find that humbuckers are used by everyone from Eddie van Halen and Dave Mustaine, to Jimmy Page and Dimebag Darrell. Humbuckers feature two coils wired out of phase with each other, and – as the name suggests – are used to eliminate the unpleasant 60-cycle hum that plagues many single-coil pickups. Gibson’s ’57 Classic Plus is a legend in the world of humbuckers, although be sure to check out our humbucker page for more excellent models.
A basic overview of how they function might, the volume pot will receive a signal from the pickup selector it will then transfer this signal to both the tone pot and output jack. Pots can also come as ‘blended’ in which case it will control two pickups and may even have a toggle switch dedicated to just the one pot. This is much less common and won’t play a role in assembling an electric guitar kit in most cases.
The term overdrive refers to when a tube amp is driven past its range to supply a clean tone. This is something we as guitar players have come to love and seek out. A common question is “what is the difference between overdrive, distortion, and fuzz as the terms have become interchangeable?” The short answer is not a lot, just one is more extreme as we go down the line.
The first and easiest adjustment that most electric guitars can benefit from is stuffing soft foam into the cavity behind the pickups in order to stop microphonic squealing. The first time I used this was when I was repairing a Gibson Firebird for Johnny Winter—the foam stopped the pickup’s back plate from vibrating like a microphone diaphragm. I have since learned that reducing the space (the cubic volume) behind a pickup modifies its sound at higher sound levels. Discovering this resonating-chamber effect has altered my approach to routing a body for pickups on new guitars, too.

Echo and delay are created by copying the original signal in some way, then replaying it a short time later. There's no exact natural counterpart, though the strong reflections sometimes heard in valleys or tunnels appear as reasonably distinct echoes. Early echo units were based on tape loops, before analogue charge-coupled devices eliminated the need for moving parts. Today, most delay units are digital, but they often include controls to help them emulate the characteristics of the early tape units, including distortion and low-pass filtering in the delay path and pitch modulation to emulate the wow and flutter of a well-used tape transport.
For guitarists who must have original-era Strat® sound, look and feel, the Classic Series '60s Stratocaster Lacquer epitomizes the instrument during its second decade, when musicians used it to conjure and create electrifying sounds never before imagined or experienced. With authentic features including a nitrocellulose lacquer finish in classic Fiesta Red, everything about it takes you back to a wildly creative time when rock music came into its own—from surf to psychedelia and more—and players started to discover in earnest just what a phenomenal instrument the Stratocaster really was.
Effects are electronic devices and circuits that process the electronic signal input from an instrument or mic. Also referred to as FX, they run the gamut from limiter or expander settings so subtle you can barely detect them to sci-fi modulation effects so extreme that the original sound is virtually undetectable. Think of your guitar or bass as your artist’s palette of primary colors. Effects are the equivalent of your brushes, tools, and color-mixing skills that add near-limitless creativity to your artistic vision.
{ "thumbImageID": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000", "defaultDisplayName": "Warwick German Pro Series Corvette $$ 5-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Satin", "sku": "sku:site51500000138039", "price": "2,069.99", "regularPrice": "2,069.99", "msrpPrice": "2,699.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin-1500000138039.gc", "skuImageId": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin/K36090000002000", "brandName": "Warwick", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Burgundy Red", "sku": "sku:site51500000072276", "price": "2,199.99", "regularPrice": "2,199.99", "msrpPrice": "2,849.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red-1500000072276.gc", "skuImageId": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

If you love effects like we do, we hope you'll find this top-50 list a useful guide to discovering the classic effect boxes that have shaped the guitar sounds of rock, metal, blues, punk and many other styles. And if you're like us, it will undoubtedly compel you to plunk down a chunk of cash for a collectible pedal or two on eBay. Don't say you weren't warned.
Speaking of tiny little helpers that could fit anyone, let me introduce to another seemingly impossible amalgamation of great sound and great look. The Line 6 Micro Spider 6-Watt Battery Powered guitar amplifier has a whole lot of qualities that make it the favorite small amplifier of so many musicians who are constantly on the go or don’t have too much space. With its small form and light body it can be easily transported anywhere you go, while its battery negates the need to be constantly plugged into an outlet and hoping that you have some kind of source of energy. The best part of the amp is of course the sound of the guitar, which is quite outstanding for the price it is offered up at. One of the best options of small guitar amplifiers available for you that I want you to remember when you start attempting to make a decision on buying one. Great stuff to have, really.
Most of the time, you’ll almost always see a piezo pickup on an acoustic electric guitar with the addition of an on-board preamp. Typically, it will be installed underneath and in contact with the saddle on the bridge of the guitar where it can effectively pick up vibration energy. This specific type of device is called an active undersaddle transducer. This type of pickup is often paired with other pickups and microphones to provide versatility for sound options, and to produce a richer, more organic and natural sound. A piezo pickup and other types of electronic pickups are what we call active pickups.
As the crowds at Beatles shows got louder, they needed louder amps. Jennings provided Lennon and Harrison with the first AC50 piggyback units, and McCartney's AC30/T60 rig was replaced with an AC100 head and an AC100 2×15" cabinet. Lennon and Harrison eventually got their own AC100 rigs, with 4×12"/2-horn configurations. In 1966 and 1967, The Beatles had several prototype or specially-built Vox amplifiers, including hybrid tube/solid-state units from the short-lived 4- and 7-series. Harrison in particular became fond of the 730 amp and 2×12 cabinet, using them to create many the guitar sounds found on Revolver and Sgt. Pepper's Lonely Hearts Club Band. Lennon favoured the larger 7120 amplifier, while Harrison preferred the 730 and McCartney had its sister 430 bass amplifier.
Eric Patrick Clapton, CBE, is an English musician, singer-songwriter and guitarist. He is the only three-time inductee to the Rock and Roll Hall of Fame: once as a solo artist and separately as a member of the Yardbirds and Cream. Clapton has been referred to as one of the most important and influential guitarists of all time. Clapton ranked second in Rolling Stone magazine's list of the "100 Greatest Guitarists of All Time" and fourth in Gibson's "Top 50 Guitarists of All Time". He was also named number five in Time magazine's list of "The 10 Best Electric Guitar Players" in 2009 In the mid-1960s, Clapton left the Yardbirds to play blues with John Mayall & the Bluesbreakers. Immediately ...more on Wikipedia
Let me begin by saying this guitar is really good right out of the box. It has a booming sound, and really fills a room even when not plugged in. However, to make it really shine, you should perform a basic setup. I replaced the saddle and pins with bone and sanded the bone saddle down to lower the action. The nut is good from the factory. I also oiled the rosewood fretboard and added Martin phosphor bronze medium strings. After doing this work, the guitar sounds every bit as good as my 90’s Martin DR which is stellar. At this price range, I didn’t expect much, but what I received was a very pleasant surprise. Don’t hesitate to buy this package!
Among other things, Peavy is somewhat famous in the guitar amps world for being one of the first manufacturers to produce a close-to-tubes type of sound from their transistors amps. While this achievement might not have seemed perfect for the most discerning of ears, their solid state guitar amplifiers are good enough for the general public not to tell the difference.

This tonewood is nearly always seen in the material used for a fretboard on the neck. The various species of Rosewood add their own harmonic overtones with Indian Rosewood being the most warm. In general, Rosewood provides incredible harmonic complexity, personality, and resonance that’s worthy of stage and studio recording as can be seen on the solid Rosewood body of the Yamaha A3R A-Series Guitar.
“Tone that emulates the human voice is always more accessible,” Waara continues. “Otherwise, purely electronic music would have taken over, and we wouldn’t be making guitars anymore. There are some absolutes in human DNA about wanting to feel connection and that’s probably a fuller frequency tone, that’s tone that is more reminiscent of the human voice. Or, for instance, a violin or organic instruments that have been around for hundreds of years. When we talk about guitars having an organic quality, it’s because that’s rooted in what human beings know. Which is air moving, wood vibrating, people speaking.”
Bass amp speaker cabinets are typically more rigidly constructed, with thicker wood and more heavy bracing than those for non-bass amplification. They usually include tuned bass reflex ports or vents cut into the cabinet, for increased efficiency at low frequencies and improved bass sound. Preamplifier sections have equalization controls that are designed for the deeper frequency range of bass instruments, which extend down to 41 Hz or below. Bass amplifiers are more likely to be designed with heat sinks and/or cooling fans than regular guitar amplifiers, due to the high power demands of bass amplification. They are also more commonly equipped with audio compression or limiter circuitry to prevent overloading the power amplifier and to protect the speakers from damage due to unintended clipping in the power amp.
Tone shaping possibilities of overtone and spacious ambiance of Tera Echo is now versatile, thanks to the Boss’ flagship multi dimensional processing technology. Apart from those vintage options, the updated COSM preamps in this pedalboard include new additions like crunch and metal (for Metal Style players - see our review on the best Noise Gate pedals).
List of guitar brands that include the most reliable models available. Guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

Welcome to Part 1 of a new Gibson series that will dissect a different breed of effect each week, to tell you—the player—what each does, and how it does it. Effects pedals can be divided into a range of categories of types, but there are undeniably some gray areas between these, since different designs will achieve their sonic ends via different means. The distinctions get blurrier when we throw digital technology into the brew. An analog and a digital chorus, for example, are very different circuits, approached—from the design perspective—from very different standpoints, although the sonic results may sound roughly similar (in the good ones, though, the subtleties are usually quite distinctive).

Alnico magnets in a humbucker pickup should make you think vintage tone, with said pickups generally lower in output in comparison to their ceramic counterparts. But having proved capable, and indeed at home with rock and metal, it's great to learn that rolling off the gain emphatically proves that the XM-DLX2 is no one-trick pony; the neck pickup easily handles fat, rounded jazz/blues tones with the bridge pickup fluent in Skynyrd-esque raunchy pickin' country.

If you want to get this game, you have a few options. The game is $60 with no guitar cable included; this is the best bet for owners of the original "Rocksmith," as the cable that came with that game works here, too. If you don't have the cable, but have a guitar, the game costs $80. If you need a guitar, too, that'll run you $200 for an Epiphone Les Paul Electric Jr. guitar, plus the game and cable.

A guitarist’s or bassist’s effects chain can largely determine the uniqueness of that player’s tone. Perhaps the most common effects pedal is a distortion or overdrive pedal, which either provides a distorting effect or overdrives the guitar’s signal into the amplifier—a tone that is highly popular in many genres of music. Other popular effects pedals include a wah-wah pedal (designed for sweeping a guitar’s tone control), fuzz, delay, flanger, phaser, reverb, chorus, compression, looping and boost. Many guitarists also use an EQ pedal to further shape and customize their sound. With all the brands and effects available at Guitar Center, your effects pedal options are virtually endless.
Usually what a lot of people complain about when they say a small amp has a lack of power, they mean that the lower tones feel a little lacking. Well, picking the right amp, and placing it right, should allow the lead guitar to shine with the high tones, while also being powerful with the low tones. Yes a smaller amp will; forever have issues with low tone, but correct construction, presence of vacuum tubes, and even simply the correct placement can all solve these problems during small gigs.
Non Locking Tremolo FAT/SAT TREMOLO TREMOLO ARM INSTALLATION The tremolo arm can be inserted and removed very easily. Insert the arm into the armhole on the tremolo base plate. Pull up on the arm to remove it. TREMOLO ARM ADJUSTMENT (SAT PRO) To adjust the height of the arm, remove the tremolo spring cover from the back of the guitar, and use a 3 mm Allen wrench to turn the height adjustment screw attached to the bottom of the tremolo block.
So, how to use the tone knob? Open it to get a trebley sound, and roll it off to get a warmer, darker tone. Experiment. Some guitars sound best with the tiniest roll back on the tone knob, some songs require a certain combination of tone and pickup settings to sound best. Try to listen to the John Mayer DVD “Where the Light Is” and try to emulate the guitar tones there using only your pickup selector and knob. He uses different guitars and settings, but a lot of those can be emulated just with your guitar’s controls. Experiment.
The first and easiest adjustment that most electric guitars can benefit from is stuffing soft foam into the cavity behind the pickups in order to stop microphonic squealing. The first time I used this was when I was repairing a Gibson Firebird for Johnny Winter—the foam stopped the pickup’s back plate from vibrating like a microphone diaphragm. I have since learned that reducing the space (the cubic volume) behind a pickup modifies its sound at higher sound levels. Discovering this resonating-chamber effect has altered my approach to routing a body for pickups on new guitars, too.
To combat this, many jazz players began to favour semi-acoustic guitars. These often came with feedback reducing wooden blocks installed inside the body, which addded extra weight to the instrument. But, with the welcome side effect of increasing the amount of sustain produced. Gibson and Ibanez cornered the mass-production market, offering a range of hollow bodied guitars which were well received by jazz players as well as players of genres like blues and rock n’ roll. As time went on, many players even gravitated towards solid body guitars, on account of the unique and arguably more versatile palette of sounds on offer.

Some bass players cannot use a bass combo amp, either due to strict noise and disturbance rules in their apartment, lack of space to store a combo amp (if they live in a small room) or due to the need for a set-up which can amplify multiple types of instruments and/or voice. Alternatives to buying a bass amp for people who have noise or space constraints include a headphone amplifier or a micro-practice amp which includes a headphone jack (on bass amps, connecting headphones to a headphone jack automatically turns off the main loudspeaker). Multi-instrumentalists and bassist-singers can consider a keyboard amplifier, a small PA system, or some models of acoustic instrument amplifiers which include bass as one of the instruments which can be used; all of these options have full-range speakers that can handle the bass range.

There are just a few minor differences. For example it has a bolt-on mahogany neck instead of a set neck, and the fretboard is made of rosewood rather than expensive ebony. We don’t really care about that, since rosewood actually is really good for fretboard since it’s naturally oily. You don’t want a super dry fretboard. It’s good for the sound too, since it captures some extra overtones that make your tone fuller, nothing goes to waste!

Semi-acoustic guitars have hollow bodies which give them a warmer and more dynamic range of sounds. They are vulnerable to unwanted feedback as the distorted sound increases the chances of feedback. That’s why we don’t see rock and metal musicians playing a semi-acoustic guitar. Many guitars have solid blocks inside for decreasing the feedback factor. Check out our list of semi-acoustic electric guitars here.
your right brian i been a acdc freak since u all been out in the early n mid 70s the greast band of all time. and i seen acdc 37 times through out the united states. i love my memories with the band and still watch and listen to the cds and dvds of the band. brian johnson is the best thing that happen to acdc since bond scott death. keep rockin guys i love u with a passion. mark
Launch price: $499 / £445 | Body: Chambered basswood body with arched-maple top | Neck: Maple | Scale: 24.6" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Black Top humbuckers | Controls: Neck volume, bridge volume, tone, master volume, 3-way pickup selector | Hardware: Anchored Adjusto-Matic bridge | Left-handed: No | Finish: Gold, Silver Sparkle, Black
Štěpán Rak and Kazuhito Yamashita have also generalized the use of the upstroke of the four fingers and the downstroke of the thumb (the same technique as in the rasgueado of the Flamenco: as explained above the string is hit not only with the inner, fleshy side of the fingertip but also with the outer, fingernail side) both as a free stroke and as a rest stroke.[41]
In the ideal scenario, once set, your saddles should neither be flush down on the bridge assembly of the guitar, nor extended so high they could go no further. This saddle height relative to the bridge assembly is a reflection of the neck angle. If the saddles sit flush, the neck angle is not set back very far and vice-versa. This is where you should decide if your neck angle is in need of adjustment ( if you have a bolt-on neck). Check the measurement at the 12th fret then progress up the neck, measuring every couple of frets. The string height should continue to gradually rise, if it doesn't the neck is set back too far and has to be tilted up just a little. This is a very sensitive adjustment and the thickness of a couple sheets of paper can make a big difference. Some Fenders have a neck tilt adjustment screw that is accessed with an Allen wrench through a hole in the neck screw plate. The strings must be loosened, then the neck screws, then the tilt adjustment screw is tightened or loosened. Never do this when the neck screws are tight! If you don't have a tilt adjustment, thin shims of wood veneer are fitted in the neck pocket to adjust neck angle. Uneven frets are also a possibility. If , after having followed all the above steps, you are still getting fret buzz, you must establish that the frets are all even. But this leads us to fret dressing, which is another story altogether.
I have never reviewed anything, however felt that I had to share that this is a complete disappointment. I bought it two weeks ago for my daughters birthday and it is already broken. The mechanism to plug the amp line/chord into the guitar broke, rendering it useless. The amp itself is very cheap and the sound quality was a disappointment, crackling when in use. The strap has holes that connect the strap to the guitar, were too big and would not stay fastened so I had to tie the strap with rope to see that it stayed on while she played.
I was paging through my daughter's Rolling Stone Magazine today and saw a small article with three different artists that use Harmony Guitars and they were singing their praises. I'm an old dude (or shall we say vintage)who's not familiar with all of the new bands popping up today, so I can't even tell you who these artists are. However, I did find it interesting that Rolling Stone did a spot on these guitars. I was too young to get my hands on many Harmonies when I was a kid, so I can't comment on their quality, but I know they were budget guitars and weren't considered anything special back then.
This company really does nothing for me. Hideous designs, cumbersome shaped guitars and the fact that they keep milking dime bags name just makes me feel like they don't have much else. There are definitely worse brands out there like first act and daisy rock (shudders) but I've always thought dean just always sucked as a metal guitar company and b.c. rich isn't to far behind them in my opinion.

Copyright © 1996-2018 American Musical Supply, Inc. All rights reserved. American Musical Supply reserves the right to correct pricing and/or product specifications in the event of typographical errors found in our print catalog or on our website. If a product is listed at an incorrect price due to such errors or because of inaccurate information received from a supplier, American Musical Supply shall have the right to refuse or cancel any orders placed, whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is canceled, American Musical Supply will issue a credit to your credit card account in the amount of the charge.

Interestingly, the 2019 version of this guitar doesn't stray too far from the more expensive Standard model in terms of looks - some even prefer it over more expensive models because of its streamlined appearance. While there are no high grade tonewoods involved, the Les Paul Tribute still uses the same mahogany body and maple top combination. The 24.75" scale length neck also follows after the Standard model, complete with a 22-fret rosewood fretboard and a 1.695" nut width. As the name suggests, this model features a slim taper neck profile that modern players will appreciate. Finally, it is equipped with a 490R humbucker for the neck and a 490T humbucker for the bridge, which reproduces the sound of old Les Pauls from the '60s.
Compression: A "limiter" is envisioned as a circuit which prevents the output signal from exceeding a certain limit. If it did this by clipping, it would cause distortion, but if it can do it cleanly by just progressively reducing the amplification of the incoming signal, then it may properly be called a compressor. A compressor reduces the overall dynamic range by "compressing" the gain of high amplitude signals while maintaining the design gain for lower amplitude signals.

Echo controls usually let you determine the level, the period between playbacks, and the decay—the rate at which succeeding notes become quieter and quieter until they fade out altogether. The period (or time) parameter is often controlled by a single button you push repeatedly in time with the music. This is called tap delay and keeps your echo effect from clashing with the music's time signature.
With a typical Strat single coil pickup and assuming an instrument cable capacitance of 500pF, 250K tone pot, 0.022uF cap, guitar plugged in to a 1Meg input, the range of the tone control is roughly from 6.0kHz -3dB (tone fully clockwise – with a resonant peak of +7.4dB at 3.9kHz) to 950Hz (tone fully anti-clockwise – with a resonant peak of +4.5dB at 594Hz). These figures vary from pickup to pickup and depending on the instrument cable capacitance.
Here you will find a selection of our most popular brands of acoustic guitars. This range includes Australian manufacturers Maton and Cole Clark, prestigious American companies C.F. Martin and Gretsch as well as fantastic value for money in Fender, Yamaha and Epiphone. We stock guitars ranging from beginner to professional, with and without pickups and in all different shapes, sizes and finishes.

I had this guitar handed down to me. It is in pretty rough shape. I think it is in good enough shape to restore to good condition/used shape. Before I attempt such a thing I would like to know more about the guitar itself. I know the history of Lyle and "Lawsuit" guitars so that part is done. The body has a cherry red finish with 2 "f" openings. The neck has had some stress on it, enough to have the wood lift a little on its grain pattern about 2 inches long from the nut to the fret board. I am not sure if injecting glue into this will keep the neck from breaking in the future. The fret board is loose at the nut but I believe I can glue it again. This is not the first restoration I have done. I have restored a flute and a grenadilla wood clarinet. Any comments regarding how to or if I am wasting my time will be welcome.
My current setup is tuner>wah>blues driver>keeley falng/delay/fuzz box>sonic max>looper. The second photo is current setup which sounds way better than original. Problem is now my flanger/phase side of my keeley won’t get loud like it used to and my loop wont let me hear what I’m playing when I lay down a riff, also when I play the loop back I can no longer play over the track.
In more recent years, a diverse cross-section of artists have started to favour Rickenbacker guitars. In 1979, Tom Petty and Mike Campbell of Tom Petty and the Heartbreakers would adopt the Rickenbacker 12-string “toaster” jangle into their records and still use the vintage 1960s models. The post-1960s “Hi-gain” pickup-equipped guitars are associated with The Jam and REM. The “Hi-gain” pickups are well suited to harder spiky pop/rock sounds as well as the classic clean chime.

So, what string gauge is standard for electric guitars? Most new guitars come strung with super-light or light-gauge strings. For beginning guitarists, that’s probably a good place to start. As you develop fretting and picking skills and your fingers gain calluses and strength, you may want to gradually move up to heavier strings, depending on the music you play and the tone you seek. Many guitar manufacturers make specific recommendations about what strings to use. Some produce their own strings or have them custom-manufactured to their specifications.

Even with such a lightweight configuration, the Fishman F1 system is still more than capable of rendering the tone of the DCPA4R with a great deal of accuracy due to the superior tight focus on the preamp. This guitar is our pick for the top acoustic electric guitar if price is no object. There are many other awesome models out there and we urge you to check them out as well, but you'll likely find that your search could have ended right here.
Chorus pedals really made their mark in the 80’s with the likes of the Boss CE-1 and CE-2, the Electro Harmonix Small Clone and the TC Electronics Stereo Chorus. I found a nice definition of chorusing on Wikipedia: “Chorus pedals mimic the effect choirs and string orchestras produce naturally by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or “vibrato” to part of the signal while leaving the rest unaltered.” A chorus is a modulation effect but the modulation we hear is produced by delaying the wet signal a very short duration causing the doubling effect we hear. So it is actually a time based effect.

The brand’s biggest boom through the fifties and sixties was largely down to the birth of rock n’ roll. Thanks to their excellent hollow and semi-hollow models, Gretsch guitars were used by icons including Chuck Berry, Chet Atkins, Bo Diddley, and George Harrison. Since 2002 the production side of things has been run by Fender, although the Gretsch family still own the company.
Got this beautiful guitar less than a month ago and played a couple of solo acoustic gigs. People were wowed by the way the sound of this guitar fills the space ( I played it through a Bose tower). Loved the feel of the fretboard. Though the body is a jumbo, it doesn't feel like a dreadnought. The guitar looks very attractive too and I had one person come over during a break just to admire the guitar. So now here's why I have given it 4 stars. The electronics were faulty on my guitar. The tuner switch didn't turn off automatically after I hit them to tune the guitar. The light stayed on till the batteries were drained out. This happened twice to me after which I decided to send it back. I also noticed a big hum building up during my second gig with the guitar - I
“The tremolo tail assembly was engineered specifically for the Spectrum ‘5.’ The bridge is an integral part of the whole assembly and is, of course, universally adjustable. The marvel of it all, however, is that the tremolo does not exert any friction (hence no wear and tear) on the strings. The tremolo action causes the whole bridge assembly to move smoothly back and forth.
Electronics.  If your guitar comes with a pickup system (either from the factory or aftermarket) we will test it before it ships.  Poor sound, uneven string balance, and just plain component failure is all checked & corrected so you don't have to fool around with it. If your guitar's system requires a battery inside the guitar, we may remove it prior to shipping.

But there are more questions – are you a beginner, or do you have 20 years playing experience under your belt? Are you on a tight budget, or is money no object? Do you prefer funk, or are you a full-on metalhead? Somewhere the perfect guitar is waiting for you, and – with hundreds of reviews on this site – chances are we have featured it on these pages!

One trait of most ribbon mics is the figure-of-eight polar response, and this is often exceptionally consistent across the frequency range. This polar pattern means, of course, that ribbons tend to pick up a little more room ambience than cardioids, given that the polar pattern is as sensitive behind the diaphragm as it is in front. Ribbon mics are also often characterised as sounding 'smoother' compared with typical condenser microphones, partly because their construction avoids the high-frequency diaphragm resonances normally inherent in condenser designs.
Definitely agree that Fender should be number one. Marshall is over rated, and fender brings the tone way better then a Marshall hands down. Marshall makes you pay for their name, fender only charges you for the amp components and the time tested fender quality. Why do you think so many amp companies try to replicate the fender tone?... Because its awesome and blows peoples minds!
Most overdrive/distortion pedals can be used in two ways: a pedal can be used as a "boost" with an already overdriven amplifier to drive it further into saturation and "color" the tone, or it can be used with a completely clean amplifier to generate the whole overdrive/distortion effect. With care - and with appropriately chosen pedals - it is possible to "stack" multiple overdrive/distortion pedals together, allowing one pedal to act as a 'boost' for another.[44]
The desire for innovative sounds has intrigued musicians in every culture since the dawn of time. Oscillating the volume of a note is an ancient technique — we’ve been able to do it with our voices as long as we’ve been capable of singing. Any musician playing a stringed instrument can create tremolo effect — they simply move the bow or finger back and forth while sustaining a note, as violinists and cellists do. But what about other sounds? How has the addition of mechanical and digital devices changed our music?
The humbuckers were smaller than typical, with metal covers and two rows of exposed adjustable polepieces. The pickups and three-way were mounted on a small black/white pickguard, with knobs on the body. Two jacks for mono or stereo output were mounted on the side of the lower bout. The two-octave unbound rosewood fingerboard had dot inlays. Early Preachers had “Preacher” engraved on the lower pickguard and a bridge/tailpiece assembly was similar to that on the Breadwinner/Deacon, with more metal and less plastic. Other versions are seen without the engraving and all-metal bridge/tailpieces, indicating the model evolved. Though no information is currently available on when the transition occurred, based on evidence from later UKs, it happened late, possibly around 1980.

Regardless of what side anyone is on, when it comes to the tonewood debate, tonewood's relevancy is just a small part of a bigger discussion. Simply talking about guitar, sparks interest in guitar. This is and will always be a good thing. Any pursuit that expands one's creative and mental abilities can be regarded, in most cases, as a grand and noble thing. So, in arguing about tone wood, it's fanatical sides raging against each other, interest in the instrument they're picking apart will inevitably grow.

Guitar Center Twin Cities provides comprehensive guitar repair services for the Roseville area. Our repair technicians are as passionate about your guitars and basses as you are, and we have the experience needed to keep them performing at their best. Whether you need a quick adjustment to make your guitar easier to play, or a complete guitar rebuild, we have the tools and know-how to take care of your instrument. Guitar Center Twin Cities can also help build a maintenance plan that fits you and your guitar or bass needs, including custom setups, restrings and more. We also take care of fret repairs, hardware and pickup installations, upgrades and customizations, bone and graphite services and more.
The plectrum, or flat pick, is another key piece of essential equipment. For electric guitars, it tends to be a thin piece of plastic, metal, shell or other material shaped like a teardrop or a triangle. There are also thumb picks mounted on rings and finger picks on the player's fingertips; you'll see electric guitarists using both of these as well as a standard pick. 
Greetings from Adam Reiver! Welcome to the new FU-Tone website! (Formerly FU does so much more than upgrade parts for "Floyds" and FU just seems so fitting for the circumstances of the name change! I have been working on improving tone with the greatest guitarplayers in the world for the last 25 years. I have found out what works and what does not... I am happy to share this with you. Tone is selective! FU is dedicated to help you find what is best for YOU! Using the best materials available, FU manufactures the ultimate in high performance guitar parts used by the PROS! Obviously, FU specializes in locking tremolo parts but if you dig around the site you will find upgrades for your Strat, Les Paul, Tele, Acoustic and more. In my dedicated effort to bring you the best of the best, I will continue to design and manufacture new FU products as well as bringing in other items that I think are cool. Check back often, feel free to ask me questions and keep chasing TONE!
The electric guitar is a staple in the music industry. Over the last several decades, the use of the best electric guitar has evolved across many music genres. The electric guitar has made grand entrances in the likes of Rock, Pop, Hip Hop, and more. Today, it is considered one of the most essential instruments in pushing musical creativity forward. Whether you are a beginner or an expert electric guitar player, the variety of sounds and distinct musical styles will surely take any music genius to the next level. We’ve reviewed electric guitars & compiled a guide on how you can best spend your money on the perfect electric guitar.
The second issue of the Les Paul guitar was introduced to the public in 1954. Called the Gibson Les Paul Custom, this entirely black guitar was dubbed the Black Beauty. The Les Paul Custom featured a mahogany top to differentiate the instrument from its Goldtop predecessor’s maple top. It also featured the new Tune-o-Matic bridge design and a pickup with an alnico-5 magnet, P-480, in the neck position. In addition, since 1957, the Custom was fitted with Gibson’s new humbucker pickups, PAF,[16] and later became available with three pickups instead of the more usual two. The three pickup model retained the standard Gibson 3-way switch so not all pickup combinations were possible. The neck and bridge-only settings were retained, but the middle switch position was set to enable the middle and bridge pickups. A common modification was to restore the standard neck/both/bridge switching combination and add a switch to enable the middle pickup on its own.[citation needed] The guitar is wired as a “normal”2 pick up Les Paul except there is a master volume , master tone, (for front and back pu) while the middle pick up has its own volume / tone. this allows the middle pu to turned out of the circuit or mixed with the other two. allowing many different tones.
The company’s craftsmanship and innovation remain unmatched. Aside from their traditional ranges, Gibson also offers seriously high-tech instruments. This Mashable review of one of the brand's most revered models lauded not only its full-bodied tone but also Gibson’s penchant for taking risks. Its modern-take-on-an-old-icon kind of thinking allows it to constantly raise the bar—and the prices too, unfortunately. respects the intellectual rights and property of the owners, luthiers and salespeople at the Rickenbacker, Gretsch, Gibson and Fender Guitar Corporations. Registered trademarks/designs of these corporations include, but are not limited to, 325, 330, 360, Jetglo, Stratocaster, Flying V. is not affiliated with these corporations in any way. The guitars above represent instruments built in Japan for the Japanese domestic market only. They are no longer being made or distributed, which makes them rare. This page was created for collectors and enthusiasts; for the sole purpose of providing information, photo documentation and research tools.
Smaller players, musicians who travel frequently, and parents shopping for children, may also want to consider travel and mini-acoustic guitars. These guitars were designed for the comfort of smaller players, and for convenience when traveling, but many guitar manufacturers have invested significant time and resources into creating smaller-scale acoustic guitars that don't compromise quality or sound.

One of the best and most affordable gigging amps I have ever played. Blackstar accommodates all styles and budgets and should be in place of line 6. Too many people want traditional tone, but Blackstar brings a new edge to the table and builds extremely reliable tough as nails amps with new ideas like the ID series amps, I own an ht40 and am extremely impressed. Get one.
A lot of folks really like Squier guitars. In most cases, I'm not one of them. Fender’s economy guitars (Squiers) are cheap, coming in under $400 (often $200 or less), which can be an attractive option for a first-time buyer. However the price difference between a Squier Strat and a real deal Fender Strat isn’t big enough to make up for the quality hit you take when you buy a Squier.
The F-65 was the top of the line with two equal cutaways. Other than the bookmatched cutaways, this was the same as the two-pickup F-55, with the addition of a Bigsby-made Martin vibrato in which the stylized “M” had become a similar “V” shape. Probably the strangest feature of the F-65 was the fact that the heel of the neck did not change from the single-cutaway models, creating a sort of thick chunk of body extending up to the 14th fret. The first F-65 was #179834. 1,825 F-65s were made from 1962 to the summer of ’65.
Over the years, Muddy has famously criticized EM, but around the time of its release, he seemed to have a different attitude. Blues fans claim he always hated it but the following proves otherwise. Six months after EM, the same line-up reassembled and recorded a sequel called After The Rain (1969) that still has distortion on it but isn't as overtly psychedelic. If Muddy hadn't liked EM, he would have had enough say at Chess to dismiss a follow-up, but instead he went along with it. In fact, Pete Cosey says "I'll never forget as soon as I walked into the studio for the follow-up and Muddy saw me he threw his arms around me and said ‘Hey, how you doing, boy, play some of that stuff you played on the last album." After The Rain's songs alternate between Chicago blues and distorted guitar tracks. There's a marked difference on After The Rain with Paul Oscher (harmonica) and Otis Spann (piano) from Muddy's old band joining in and Muddy playing lead guitar on several tracks. On the Chicago blues tracks, more prominent bass and drums put the music into a rock setting, but it's Muddy's slide guitar playing that highlights them. Muddy really let's loose with some striking, tenseful slide work on tracks like "Honey Bee," "Rollin and Tumblin" and "Blues and Trouble" that just send a chill through your bones. On the other side of the album, the guitar on "Ramblin Mind" lashes and cries out in dense fuzz while on "Bottom of the Sea," the fuzzy leads seem to hang in the air along with an innovative bowed bass and harmonious organ in the background (the bowed bass is also used on the record on "I am The Blues").
A musician is only as good as the songs he or she plays - except when you're improvising, of course! And even for those of us who write mostly our own music, there's always room for a repertoire of the classics. Building up your musical library starts with the tablature available in this section, and where it ends is up to you. If you're like most musicians, you'll probably spend your whole life collecting and trying your hand at new music. And with material here for guitar, bass, ukulele, banjo, mandolin and even violin, there's something for virtually everyone. Cover the songs in your own personal style or try your hand at recreating them as they were first recorded; it's up to you.
If anybody needs a Bridge, I have a Teisco Roller Bridge for sale, it is a a copy of a Gretsch Roller bridge but includes a solid steel Base like a Rickenbacker Bridge Base. The string saddles are rollers which are adjustable side-to-side for proper string spacing, and each side of the bridge is adjustable for Height. It is in excellent condition, probably from 1965 thru 1968. On a scale of 0 to 10, it is a 8.
Doling out everything that an electric guitar newbie could possibly require for less than a hundred bucks, the Davison Guitars Beginner Starter Package with a full-size electric guitar (39”) is super-alluring from the very outset. While many so-called beginners packages reek of inferior quality, this full size black electric guitar plus accessories combo strives to deliver complete bang for your buck. And that’s exactly why this thrifty, but high value electric guitar package has garnered massive popularity, and has been featured in ‘Top 5 Electric Guitar Beginner Packs’ across most reputed websites.
The Epiphone LP Special II has a mahogany body and neck. The fretboard features dotted inlays and is made of traditional, unfinished rosewood – a standard choice that yields a sound consistent with the aesthetic standards of a Les Paul. If you want a Les Paul but you don't want to pay a fortune for it, this mahogany beauty is worth your consideration.

Theory - These sessions will be devoted to investigating how the fretboard works, how strings and notes relate to each other, what chords are made up of etc. A lot of theory time will be spent reading and analysing diagrams and your guitar's fretboard. This aspect is for understanding how music works on the guitar, to map out the fretboard in your mind so you can later apply the physical techniques with confidence. If you're serious about getting good on guitar, you need time devoted to theory.
Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
My Les Paul never did sound quite right. It was always off somehow. I discovered it had the same problem like yours with the intonation being off the scale. Once I followed your guide, I discovered the neck adjustment was far too loose, and gapped it properly. Shazaam, the intonation problem disappeared, and now it plays like butter with all the notes dead on! U R the MAN!

What if you could get a wide variety of sounds from your acoustic guitar, including complex effects and virtual (MIDI) instruments, without having to use an external amp? That would certainly be a game-changer, as it could essentially turn your guitar into an all new instrument, and by adding to your available 'soundscapes' without needing to be tethered to a plug, it could also convert acoustic performances into rockin' ones.
Our pick here is the PAC112V version, for a few reasons. First off, the solid alder body offers you the same tonewood you’ll find in a lot of higher end S-style guitars. The maple neck and diecast tuners will feel really premium in your hands, too. But the 112 series further boosts its value with two Alnico V single coil pickups and an Alnico V humbucker. The addition of the humbucker in the bridge position will open up a whole other world of tones for a budding musician, giving the option for both clean, crisp single coil sounds and thick, high-output humbucker growls.
The questions I get asked in response to people reading my stuff on guitar wiring often relate to the 5-way pickup selector switch so I thought I’d write a brief explanation of how it works. Understanding how the 5-way switch on your guitar works is key to successful guitar wiring. Knowing what goes on inside the switch may sound like a simple, maybe trivial, detail but it’s something we all need to understand and it’s not as easy as it first seems.
Since affordable guitars are designed for students, manufacturers know that playability is of utmost priority. This is the reason why many of these budget-friendly guitars don't stray from familiar neck and body measurements. This ensures that they feel as close to premium guitars as possible, albeit utilizing more cost effective materials and production methods.

{ "thumbImageID": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "defaultDisplayName": "Fender American Professional Jazz Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030611", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black-1500000030611.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030610", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray-1500000030610.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray/J46145000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The most underutilized sonic tool that electric guitarists have is built right into their instruments: the volume and tone dials. Most players tend to leave their guitar’s volume up full and set the tone knobs in one place and work from there, but with a little practice it’s easy to get used to using these potentiometers or pots — which are contacts that control voltage — to sculpt interesting sounds.
More and more are finding themselves downsizing their pedalboards, if not totally swapping all their stompboxes for a multi-effects unit. There are also many who are looking to upgrade their existing guitar processor. Whatever your case may be, it is our intention to help you find one that fits your needs, or at least point you to the right direction.
The Omen line is made for everyone, but perhaps leans just slightly toward the shredding crowd. This guitar features a maple bolt-on neck which features a rosewood fretboard with pearloid inlays. The inlays are a nice touch at this price, if you’re into that sort of thing. The pickups are Schecter Diamond Plus humbuckers and offer a well-balanced tone that can also be aggressive when needed. Twenty-four jumbo frets means this is good for speed.

For a more neutral experience, we bring you ESP E-II Horizon FR. This is one of ESP’s top tier models which packs a set of high output Seymour Duncans. Build quality is top notch, and so is the performance. We tested this guitar some time ago, with a number of us having the chance to play it for several days. Anyone who picked it up was in love it at the end of the day. It’s just that good.
I got the idea for this column while reviewing Universal Audio's Ox Amp Top Box for the May 2018 issue. Ox is an ingenious hybrid of speaker load box/power attenuator and cabinet/mic/room/effects modeler. You use your regular amp, but instead of miking it, you send a direct signal to the DAW or mixing board. You record the sound of your amp, while Ox simulates speakers, mics, and effects.
It’s not known how long this A group lasted – probably only a couple more years, except for the U-65RN. By ’76, the U-65RN was still around, now promoted with 17 watts, Hammond reverb, tremolo, 10 transistors, and a 12″ heavy duty speaker. This looked pretty much the same, except the logo was reversed in white out of a black metal strip above the grille and the power switch had changed. At some point, the U-65RN was joined by the UB-252 bass amp, offering 20 watts with a 15″ speaker, presumably similar and transistor. These are the only two Univox amps listed in a 1979 price list (contained in the 1980 book), though, as you see over and over, others may still have been available.
The same bracing system and pickups in chrome covers are also included within the Vintage Reissue Series, with individual volume and tone controls, and a 3-way bat-style selector switch. Hardware includes individual chromed saddle-style mounted bridge with height adjustments, and a chrome trapeze tailpiece. The one-piece, Canadian maple set neck features a 20 fret, bound rosewood fingerboard, with pearloid block position markers.
Their songs cut right to the melodic and rhythmic core of great rock and roll. Johnny contributed song ideas and slashing guitar arrangements, but he also kept the whole thing on the rails. A straight guy in a world of addicts, perverts, weirdoes and psychos, Johnny’s politics were dubious. But, like Mussolini, he made the Ramones’ rock and roll train run on time for more than two decades. John Cummings passed from this life in 2004 after a five-year fight with prostate cancer.
Whether you're recording or just plain playing for the fun of it, a headphone guitar amp is a great thing to have. You can even choose headphone amps that will work with pedals, mixing consoles and other connections, giving you a ton of versatility in how you use them. If there's one thing that's universally true about these amplifiers, it's that no guitarist should be without at least one.
While it was produced, Ovation’s super-shallow 1867 Legend was the recommended guitar in Robert Fripp‘s Guitar Craft.[22][23] Tamm (1990) wrote that the acoustic 1867 Legend has “a gently rounded super-shallow body design that may be about as close to the shape and depth of an electric guitar as is possible without an intolerable loss of tone quality. Fripp liked the way the Ovation 1867 fitted against his body, which made it possible for him to assume the right-arm picking position he had developed using electric guitars over the years; on deeper-bodied guitars, the Frippian arm position is impossible without uncomfortable contortions”.[22]
Maton JB6 is a 1970s guitar manufactured by Maton. It features a thin solid body, short scale 24 fret design, two humbucking pickups, two tone controls, one volume, in/out phase toggle for bridge pickup and standard three way pickup selector toggle switch. The body has double cutaways, set neck and heavy metal base plate supporting a stop piece and bridge for increased sustain.
In 2008, Gibson USA released the Slash Signature Les Paul Standard, an authentic replica of one of two Les Pauls Slash received from Gibson in 1988. It has an Antique Vintage Sunburst finish over a solid mahogany body with a maple top. Production was limited to 1600.[35] The Gibson Custom Shop introduced the Slash “Inspired By” Les Paul Standard. This guitar is a replica of the 1988 Les Paul Standard and it features a carved three-piece maple top, one-piece mahogany back, and rosewood fingerboard, with a Heritage Cherry Sunburst finish. Two versions were made available—the “Aged by Tom Murphy,” aged to resemble the original guitar (a limited number of these were signed by Slash in gold marker on the back of the headstock), and the “Vintage Original Spec,” created to resemble the guitar as it was when Slash first received it.[32][36]
I don't think its objective that sweep picking is better than tapping. I mean all of these techniques are great. One could say that vibrato is the best technique. But for me both tapping and sweep picking are great. Tapping kinda sounds like emotional/crying to me. While sweep picking kinda sounds like some fighting/running, I mean fast paced. - zxm
Covers all the material needed for the RGT Grade One electric guitar examination, enabling you to gain an internationally recognised qualification. The book should help you to develop all aspects of guitar playing, increase your knowledge of specialist electric guitar techniques, understand the music theory that relates to electric guitar playing and achieve your full potential as a guitarist.
While many appreciate its bulk of features, there are a few who feel that Fender went overboard, and should've limited the voicings to just a few to ensure that sound quality is not compromised. On the other hand, there are some who felt that the extra features are nice, but they are turned off by the need to use a computer to get full access to all the controls.
Naturally, it all comes down to manipulating the effect to fit the occasion. There is definitely such a thing as too much reverb or not enough. However, this is the type of thing you will have to figure out on case to case basis. With that said, you would be surprised at just how often reverb is used in music these days. Some sound engineers and producers like to be subtle to a point where you won’t notice the reverb unless you are actively looking for it. Others tend to go overboard in order to express themselves.
There’s been a steady evolution in effects signal processing since the 1940s. Guitarist-innovator Les Paul was among the first and most avid effects developers, experimenting with echo and multi-track recording to add sonic excitement to his music. The first foot-switched effect showed up in the late ‘40s with Harry DeArmond’s Trem Tol tremolo processor that was later used by Bo Diddley. In the 1950s and early 1960s other effects were developed, but they tended to be expensive and some had operational issues. Meanwhile amplifier makers such as Fender and Gibson were building reverb and tremolo effects into their amps. These tube amps also produced tasty distortion and overdrive effects when gain and volume were cranked up to maximum settings. Today, many effects are designed to reproduce those sounds.
Make sure that only the notes you deliberately play actually sound. Guitar strings aren't isolated systems like the tone generators of a synthesizer; if you simply leave them open they may ring even though you've never actually played them. Always watch out carefully for such “rogue sympathetic vibrations” and make sure you properly stop strings that sound in unintended ways.
Thank you for the post. This explained a lot to me. However, one question I have is that I play lead and when I solo, I need to boost volume. I currently have an Ernie Ball volume pedal but I can never get it to go back to the right spot when I decrease the volume after a solo. I’d much prefer to use stomp box that I can just preset the volume before playing so I have a solo volume, and a strumming volume that matches the other guitar. Do you have any suggestion on what I can do to achieve this since the EB pedal doesn’t seem to work well for me?
So the most likely answer here is to increase the height of that side of the bridge a little. This may mean the 5th and 4th strings are a little higher than absolutely necessary, but it's always about compromise with these things (unless you want to individually file down the heights of each of the saddles, but I'd advise against doing that until you really know what you're doing).
The top of the guitar has the greatest impact on the tone quality of the instrument. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. As discussed below under Tonewoods, the wood used for the top strongly influences the tonal characteristics of the guitar. The sound generated by the guitar's strings is transmitted by the bridge to the top where it is amplified. That is why, as mentioned above, the larger the soundboard, the larger the sound.
Most of these sites offer 'free' TAB, chord sheets, and lyrics. A few provide versions that are endorsed by they musician, the writer, or the company that owns the rights to the song (i.e., a licensed site). There is always a fee for access to the licensed TAB or music notation. There are even some unofficial sites that will charge a 'membership fee'.

The first National Dobro cast aluminum Hawaiians are probably relatively rare. They were probably only made for about a year, maybe less, from sometime in 1935 until sometime in 1936. By late ’36, the aluminum-bodied Supro laps (and the electric mandolin) had dropped from sight to be replaced by wood-bodied Hawaiians. The reason for discontinuing the aluminum steels appears to be related to the move. The aluminum castings and assembly were done in L.A. By late ’36, National Dobro had substantially relocated to Chicago (though an L.A. office was maintained until mid-’37), and it wasn’t economical to have them shipped all the way to Chicago. It was easier to make wooden bodies in Chicago, so after the move (by late 1936), National Dobro switched to wood-bodied Hawaiians.
An excerpt: “The Dobro brand name has been identified with resonator guitars since 1929 and is currently owned by Gibson Guitar Corporation. Despite its registered trademark status, the Dobro name has at times been used generically to refer to woodbodied instruments with 1) an aluminum cone or “resonator” mounted so that the cone opens toward the top of the instrument and 2) an 8-armed spider assembly supporting the bridge.”
Before being acquired by Gibson in 1957, Epiphone was one of the most popular guitar brands in the market. It competed with highly renowned guitar brands, including Gibson. These days, Epiphone is known for being a more affordable brand of Gibson guitars. They’re great for playing tunes from the 60s. Epiphone produce cost-effective versions or alternatives of Gibson Guitars. Many musicians claim that Epiphones were their first ever instrument. Epiphones tend to be very popular in the entry level market. Epiphones are great for people who are just starting and want a good brand name for their first guitar. So, if you’re looking for a cost effective entry level guitar, Epiphone would be your best choice.
For the metalheads, Ibanez has their Iron Label series in addition to the signature models. These guitars are absolutely metal-oriented, with no-nonsense designs that provide exactly what you need for intense shredding without gimmicks. Ibanez Iron Label guitars are based on the S and RG platforms and come in 6, 7 and 8-string varieties, all with fast, shreddable necks. The RG models even have an onboard kill switch so you can do manual strobe effects without the need for a pedal.
Myself, were my budget less than a thousand then I'm dropping a big name like Martin of my list entirely, and probably I'm dropping Taylor too. Seagull makes some solid wood instruments for around $ idea how much the electronics tack onto the price, but I'm betting a Seagull SWS guitar with electronics could be had at $900 or so with ...just the slightest of scratches or blemishes.
Effects Pedals are electronic devices that modify the tone, pitch, or sound of an electric guitar. Effects can be housed in effects pedals, guitar amplifiers, guitar amplifier simulation software, and rackmount preamplifiers or processors. Electronic effects and signal processing form an important part of the electric guitar tone used in many genres, such as rock, pop, blues, and metal. All these are inserted into the signal path between an electric instrument and the amplifier. They modify the signal coming from the instrument, adding "effects" that change the way it sounds in order to add interest, create more impact or create aural soundscapes.
The Effect: Metal has become the prevalent genre when it comes to music that involves guitars. Dialing in a proper distortion can make or break the sound of your guitar as well as your entire band. Coincidentally, it’s so easy to go overboard with distortion, all while being certain you are on the right track. The very first step is to get a dist box that is suitable for metal. Something like Electro­Harmonix Metal Muff carries just enough punch to get the job done, but not enough to drown your tone completely with gain. You’ll find this to be a reoccurring theme with a number of great metal dist boxes. At the end of the day, it all comes down to your prowess and skill. Every good metal guitarist know that it’s all about the unity of equipment and knowledge. With that said, these pedals will get you started.
Gibson market the J-200 as the most powerful acoustic guitar on the planet, and we might just agree. It’s so punchy, and has so much presence, both in the low end and right up there with the more sparkling high notes. Combine this with the L.R. Baggs Anthem pickup system, and this is a guitar that is aimed squarely at live performances where the acoustic needs to really make itself heard. It’l
Phase Three began in 1974, bringing some of the biggest changes to the series with it. Univox swapped in its own humbuckers, made unique in part due to their visible white bobbins. This change took the Phase Three Hi-Flier solidly out of the realm of Mosrite Ventures copy territory and into its own realm, considering the tone and high output changed the sound so significantly. The presence of these humbuckers – found on other Univox guitars of the same era – make the Phase Three versions some of the most highly sought after Hi-Fliers.

On my guitar, the bridge plate is held on by five screws. Three on the back of the plate, two towards the neck on the front. You may need to remove the intonation block things.One or all. If you decide to take any off, use your calipers and measure from the front of them to the back of the bridge plate, so that you don't lose your intonation. Mark each saddle like in the picture.

The specifications of the neck and string setup dictate the guitar's overall playability. As such, it is important to get a handle of important specs which include scale length (the length by which the string is stretched from the bridge saddle to the nut), nut width, fingerboard radius, and neck profile (shape of the back of the neck). Beginners normally want guitars to play easier, and will prefer those with shorter scale length, thin nut width and neck profile, and flatter fingerboard radius. On the other hand, experienced players will have grown accustomed to a specific neck configuration, if this is your case, you will want your new guitar to have similar specs to what you already like.
You should add the plugins on They are all free and are great. They use them as tools to help them design physical amps, so they are very accurate and almost zero-latency. They have a few amps and pre-amps, 2 OD pedals and even a cab modeller which is more than enough to get you started. The Emmisary is a freakin' miracle. It can do any tone (I use it for metal, blues, clean) but it's best for molten, in-your-face heavy metal since it has a 4-way EQ on the lead channel.
The thing is, if you aren’t a pro (and if you’re reading this, you probably aren’t) you don’t need to concern yourself with every element of the electric guitar. You just need a briefing on body styles and pickups, arguably the two most important pieces of a guitar’s build. More importantly, asking yourself a couple simple questions about what you’re after will help you immensely. We’ve got all that right here, plus a few great axes that should at least serve as starting points on your search. As for the Ziggy Stardust jumpsuit and the perfect rock-god pose…look elsewhere.
{ "thumbImageID": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "defaultDisplayName": "Schecter Guitar Research C-1 Platinum Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Transparent Midnight Blue", "sku": "sku:site51500000239535", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "699.02", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue-1500000239535.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Satin-Transparent-Midnight-Blue/H96103000002000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Translucent Black", "sku": "sku:site51364222300326", "price": "449.99", "regularPrice": "549.99", "msrpPrice": "799.00", "priceVisibility": "1", "skuUrl": "/Schecter-Guitar-Research/C-1-Platinum-Electric-Guitar-Translucent-Black-1364222300326.gc", "skuImageId": "C-1-Platinum-Electric-Guitar-Translucent-Black/H96103000001000", "brandName": "Schecter Guitar Research", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }