With Apple including their Guitar Amp Pro plug‑in in Logic, Sonar coming bundled with Native Instruments' Guitar Rig, and Ableton adding their new Overdrive plug‑in to Live, guitar‑slinging Cubase 5 users might initially feel a bit left out. But you don't have to, because you can assemble some pretty amazing 'guitar racks' in Cubase: it's just that Cubase takes a more à la carte approach, where you need to draw on the existing effects as if they were stomp-boxes. A VST audio channel in Cubase offers inserts for up to eight series effects, including an amp simulator, so you actually have more options than with many pedalboard setups. Furthermore, you can add some quality 'studio effects', like the new Reverence reverb, as send effects. So think of Cubase as 'virtualising' a pedalboard, then bringing it into the studio so that its output can go to studio rack processors.
The guitar offers a beginner some great features in sound and playability. For starters, it is technically a Les Paul (giving you a great “cool factor,” which is important when you’re first starting out). It cuts a couple corners that a Standard or Special Les Paul won’t, like the fact that it’s a bolt-on neck, and there are proprietary single coil pickups (as opposed to the standard humbuckers you’ll usually find in a Les Paul).
Working with Dimebag Darrell Abbot, Rex Brown, Mike Scaccia, Scott Shelby and others, this guitar master has had to work overtime to keep up with these guitarslingers' abuse. These guys make their guitars scream on stage, and it's King's job to make them sing again. "Everbody knows -- other than Scott -- that they're at my mercy when it comes to working on their guitar," he says. "That's why I'm not out on the circuit. I'm pretty picky about which guitar players I work with." (Although Darrel and Mike are no longer with us - may they ignite heaven with their notes - Scott is still tearing it up with Warbeast.) Rabid Flesh Eater, Warbeast, Rigor Mortis, Pantera, this guy has worked on some brutal guitars. "If you're going to buy a Cadillac, put the right parts on it" is one of his mottoes.

While you're doing your strumming and picking lay that part of your hand on the strings by the bridge of your guitar. This will mute or partially silence the strings. On an electric guitar going through an amp, this can become a percussion instrument. The trick is to use it for a percussion effect and then raise that hand up when you want to let the strings rings er.. ring.
Necks are described as bolt-on, set-in, or neck-through, depending on how they attach to the body. Set-in necks are glued to the body in the factory. They are said to have a warmer tone and greater sustain.[citation needed] This is the traditional type of joint. Leo Fender pioneered bolt-on necks on electric guitars to facilitate easy adjustment and replacement. Neck-through instruments extend the neck the length of the instrument, so that it forms the center of the body, and are known for long sustain and for being particularly sturdy.[citation needed] While a set-in neck can be carefully unglued by a skilled luthier, and a bolt-on neck can simply be unscrewed, a neck-through design is difficult or even impossible to repair, depending on the damage. Historically, the bolt-on style has been more popular for ease of installation and adjustment. Since bolt-on necks can be easily removed, there is an after-market in replacement bolt-on necks from companies such as Warmoth and Mighty Mite. Some instruments—notably most Gibson models—continue to use set-in glued necks. Neck-through bodies are somewhat more common in bass guitars.
If you’re new to the world of guitar or bass, a looper pedal is a great way to hone your skills. A looper pedal is not an effect, but more a tool that allows you to record chord progressions, notes or riffs and then play it back through your amp. It’s ideal for playing a chord progression or rhythm section, looping it and then playing a lead line or riff over the top – like two guitars playing together.

Fuzz boxes and other heavy distortions can produce unwanted dissonances when playing chords. To get around this, guitar players (and keyboard players) using these effects may restrict their playing to single notes and simple "power chords" (root, fifth, and octave). Indeed, with the most extreme fuzz pedals, players may choose to play mostly single notes, because the fuzz can make even single notes sound very thick and heavy. Heavy distortion also tends to limit the player's control of dynamics (loudness and softness) - similar to the limitations imposed on a Hammond organ player (Hammond organ does not produce louder or softer sounds depending on how hard or soft the performer plays the keys; however, the performer can still control the volume with drawbars and the expression pedal). Heavy metal music has evolved around these restrictions, using complex rhythms and timing for expression and excitement. Lighter distortions and overdrives can be used with triadic chords and seventh chords; as well, lighter overdrive allows more control of dynamics.[citation needed]
Three CraViolas were offered. These had a strange asymmetrical shape with a pear shape, no waist on the bass side and sharp waist (and almost cutaway taper) on the treble. Soundholes were D-shaped with fancy rosettes, with a pointed tortoise guard on the steel-stringed versions. These had slotheads with a Woody Woodpecker-like peak pointed bassward. The bridges were similar to the mustache version on the Country Western. The CRA6N Classic ($150) had a yellow spruce top and full-grained Brazilian rosewood body, no inlays or pickguard. The CRA6S Steel String ($160) was a similar steel-string with pin bridge and diamond inlays. The CRA12S 12 String ($175) was the 12-string version.
A Customer brought this guitar into us in horrible shape. He had stored this guitar in the basement for a number of years with no issues, however in the fall of 2007 a large flood swept through our area filling his basement, and in turn his guitar, with water for almost a week. Needless to say, by the time he was able to get the guitar out it had been heavily damaged. When he brought this guitar into us it was completely covered in mud and river residue, the electroics were completely shot, and the hardware had begun to oxidize. We began by completely taking apart the guitar. We thoroughly cleaned each part of the guitar, inside and out. Once completed we were actually able to save all the original hardware from the guitar and the finish had withstood the flood. The electronics had to be completely replaced however. Staying true to the guitar we used as much era specific parts as we could find. As you can see, by the time we were done with the guitar you could hardly tell anything had happened to it!
Fender Pro Series Stratocaster and Telecaster Case   New from$119.99In Stockor 4 payments of $30 FREE 2-DAY SHIPPING Epiphone E519 Hardshell Case for 335-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Epiphone Hardshell Case for Les Paul-Style Guitars   New from$129.00In Stockor 4 payments of $32.25 FREE 2-DAY SHIPPING Fender Deluxe Molded Case for Stratocaster or Telecaster   New from$149.99In Stockor 4 payments of $37.50 FREE 2-DAY SHIPPING See All Electric Guitar Cases
We are your Vintage Pickup specialists.   We have cornered the market of manufacturing the most accurate vintage pickup reproductions to which can not be equaled.  Our process is to chemically analyze an original pickup magnets and wire, then we reproduce them with the exact same magnets and wire.  We don't use stock magnets or wire.   We don't degauss magnets and say they are vintage.  Our magnets are only as strong as the elemental composition will hold.  Our wire is specially manufactured for us, we have many batches of wire with all different types of resistances and O.D.'s.  Our wire also is processed differently than modern conventional wire, these little details are what makes the Klein Pickups Reproductions the most accurate in the world.   We have a full array of models that we reproduce.  Check out our site for the full list of all of our offerings.   As a small business we always appreciate your business & support.  -Thanks
The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.
Have you ever looked at a hollow or semi-hollow guitar on the wall at your local music store and wondered how the heck they get the electronics in there? The short answer: it’s do-able, but not easy. In fact, it’s widely considered to be one of the most difficult jobs in the wide world of guitar maintenance. My tech charges extra for doing electronics work in a hollow-body, and he’s definitely not the only one.
Located in Kobe, Japan, this manufacturer made the famous Maya brand guitar. Maya guitars were in production from 1970-1980. It's been suggested that Maya may have been responsible for the Aztec badge. You'll notice that Maya has been attributed to a company known as Tahara. At this point I do not know if Maya assisted in production or if Tahara produced some Maya guitars as a subcontractor. Maya and El Maya badges have also been attributed to Chushin Gakki. More research is needed to clarify this point.
ASIO drivers do a bunch of things. For one, your DAW talks directly to an ASIO driver, no going through the Windows Mixer and actually bypassing a bunch of other Windows stuff you can’t see. The ASIO driver itself is very efficient. And native ASIO drivers allow you to adjust the buffering on that interface. If you’re working a DAW with 64 tracks of audio going to and from hard drive, you may need to add some “buffer’ memory to keep everything working, because computers are way better at doing a fewer big things than lots of little things. But if it’s just your guitar playing live, you can dial down to minimum buffering to make the delay through the PC as small as possible.
The fretboard wood is used for the part where the frets are installed (front of the neck, where you press on the strings). All our fretboards are built from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
Epiphone Les Paul Special II Player Pack   New from$249.00In Stockor 6 payments of $41.50 Free Ground Shipping Silvertone SS10 Citation Electric Guitar Package   New from$150.95In Stockor 4 payments of $37.74 FREE 2-DAY SHIPPING Silvertone SS11 Revolver Electric Guitar Package   New from$160.95In Stockor 4 payments of $40.24 FREE 2-DAY SHIPPING Epiphone Slash Appetite for Destruction Les Paul Performance Pack   New from$349.00Coming Soonor 8 payments of $43.63 Free Ground Shipping See All Electric Guitar Packs
I cut my template with a jig saw and a fine tooth blade to make sure it kept a straight edge. Then i mounted it to the body blank using small screws in the ares that would be routed out later like the neck cavity area and where the pick ups would be. You will want to start routing a bit outside your line or the edge of the template so you can get you router bit to the depth it will need to be at for the ball bearing to follow the template. I use a 1/2"x1" bit with a ball bearing guide on top.I make several passes around the body, lowering the router 1/4" at a time for smooth easy cuts. Once you have made your pass were the bearing runs along side the template, it is much easier to rout and you will end up with a nice squared edge to the body.
Thanks for this explanation. I have built a few electric guitars, but they have been in the Gibson style with two humbuckers. I am now working on a guitar with an HSH configuration, so for starters, I needed to understand the basic 5 way switch, which if you just looked at it, it makes no sense. Now I see that the wipers of each pole are on the opposite end of each side.
Built-in mics aren’t necessarily the budget option as they can be seen on some high-end guitars. They’re extremely helpful when you need volume but not so much where the acoustics of your setting, say in a concert hall, carries sound projection for you. However, the internal mic can raise problems for the performer as they’re prone to producing unwanted feedback. Multi-blend pickup and preamp systems allow you the flexibility to switching out from the mic when it proves to be problematic. However, if you’re going to install one yourself, look for one with a high feedback resistance of exceptional quality.
Fishman is the main brand that you’ll see manufacturing the electrics, but lots of the bigger guitar brands will also have their own in house products. Higher end guitars are more likely to have specialist or boutique equipment which is generally considered to be better. Gibson using LR Baggs pickups systems is one such example. You can also opt for aftermarket pickups.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Wood: Maple & Wenge - Neck Construction: 5 Piece - Nut Width: 54mm - Fingerboard: Rosewood - Frets: Jumbo - Inlay: White Dot - # of Strings: 7 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Gibraltar Standard II-8 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Circuit Type: Active - Pickups: EMG 808 - Pickup Configuration: H-H - String Instrument Finish: Cobalt Blue Metallic, Galaxy Black - Made In: Japan

As with other plucked instruments (such as the lute), the musician directly touches the strings (usually plucking) to produce the sound. This has important consequences: Different tone/timbre (of a single note) can be produced by plucking the string in different manners and in different positions. For example, plucking an open string will sound brighter than playing the same note(s) on a fretted position (which would have a warmer tone).
When making solder joints to switches and pots, the lug and wire should be heated by the tip of the iron and the solder pressed (or flowed) onto the joint. In this manner you can avoid cold solder joints as both components are properly heated prior to the application of solder. Melting solder on the tip of the iron does not insure the actual components are being heated properly.
If you never intend to do octave high vibrato bar stuff or play music in the style of bands like PANTERA (hard, fast metal, with lots of high note bending leads), or Jimi Hendrix (psychedelic rock), then exclude any floating or fancy bridge (also called a tailpiece). Non-floating tail pieces are usually more stable (keeping tune and intonation) and cheaper to buy.

Others are perfect for getting started. In fact, the Epiphone Les Paul Special II is the electric guitar I most often recommend for beginners. This is an instrument that’s modeled on the legendary Gibson Les Paul, with many of the same attributes such as a single-cutaway body, dual humbuckers and tune-o-matic bridge. It is a simple yet versatile setup.

Buy a kit if you want to make things easier. Several companies produce electric guitar kits that include all of the parts you’ll need, prepared and ready to assemble. If you just want to get your feet wet, these can be a good choice. While you won’t get the full experience of making a guitar from scratch, you’ll still get the satisfaction of putting it together and finishing it yourself.[6]
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.

The way you fix this is by finding a book that makes you reconsider an aspect of your playing, regardless of what that is. If you’re into metal go ahead and pick up a book on Gypsy jazz. If you’re a dedicated Bluegrass flatpicker try your hand at learning some jazz. If you learn one thing from a different genre that you can routinely apply to your genre of choice you can break yourself out of just about any rut imaginable.

More often than not a customer chooses bone as a replacement for cheap plastic nuts supplied on new guitars. It's such a good material for instruments because it's really dense – meaning vibrations travel through it faster meaning that more vibration is transferred to the rest of your instrument - essential! It's also great because it contains natural lubricants which are essential for tuning stability.
GuitarFX™ guitar software (it's on the market since 1997!) enables you to turn your computer into a guitar effects processor. Simply plug your guitar into the microphone or line input of your sound card, run this software, then press "Start" button. To stop playbacking pre-recorded guitar sounds click once on a picture of a small red lamp placed left to fx-slot with "Playback wav" title. Enjoy real-time crazy distortion smoothed by power filters and shaped by multi-band equalizers! Author of GuitarFX™ offers several presets, including "hard rock", "high gain lead" and "solo" effects. However, you can click through several menus to easily create custom tones. They can be saved as pre-sets for future use. Pre-sets can be assigned to "hot keys" F1..F12. Among the effects, you can apply 4 types of distortion, noise gate, wah-wah, compressor, EQ, flanger, reverb, chorus, delay and a number of other filters and effects. You can save your recordings to your hard drive. GuitarFX has the "software effects chain builder" with 16 fx slots. Clean guitar signals go to the top fx slot, then they are passed through all fx slots from the top to the bottom and go to the sound card output from the bottom fx slot. You can move any fx slot up. To do this place your mouse cursor on the top part of the appropriate "Tune" button and then do right mouse button click. Also you can move any fx slot down. To do this place your mouse cursor on the low part of the appropriate "Tune" button and then do right mouse button click.
When you’re just starting out you generally play in less than ideal conditions and your soundman, if one is present at all, isn’t going to be as well versed in his/her craft as someone who works in larger venues. Because the guitar is resistant to feedback and gives you the option to sculpt your tone without having to rely on a console, it will prove to be a valuable asset.
It is an obvious fact that all those great guitarists must have had a humble beginning, having started with the best beginner guitar that suits them. Some of these artists started with guitars inherited from their parent, friends and/or relatives while others ordered theirs from guitar shops. If you are a newbie yet a guitar enthusiast and you are seeking to buy one among the best guitars for beginners, then there are tips and facts you will have to put into consideration.
Hook isn’t worried the current challenging economic pressures will jeopardize the guitarist’s iconic status. “The guitar hero will never go away,” he said. “People adore this image of the guitarist almost being like a cowboy. You will always see the odd-looking kid walking down the street holding a guitar — there just might not be as many of them.”
For those other performances, we run into limits of computer memory, computer processing power and computer programmers' time (and talent). With increasing processing power available in the consumer market, simulations are in some cases surpassing storage intensive sample libraries in terms of acoustic similarity and perceptive preferences. In guitar world, though, there seem to be no VST players of the simulation variety contending for top honors against leading sample libraries - of which amplesound.net seems to be the leading collection (unless you like something Vienna Symphonic Libraries has to offer)
For rehearsals, studio recording sessions, or small club performances, electric and upright bass players typically use a "combo" amplifier, which combines a preamplifier, tone controls, a power amplifier and a speaker (or multiple speakers) in a single cabinet. Combo amps come in a variety of speaker configurations, such as one speaker (e.g., often one 12" speaker or one 15" speaker, although there are some micro-amps with one 10" speaker) or two speakers (e.g., two 10" speakers) or four speakers (e.g., four 10" speakers). The dividing line between practice amps and combo amps that can be used for live venue shows is described in the power in watts section. The most powerful combo amps available deliver between 800 and 1000 watts to the internal speakers.
You might be wondering: “Why the glossy finish?” Having a gloss finish can mean the difference between your guitar cracking—or not--in extreme temperature changes.Of course, like all Cordobas, there is a truss rod with which you can change the string relief, so you’re not having to press the strings down so hard, making it easier for beginners to learn.

Anyone who wants a guitar that can handle both the expected twang and bluesy yield of a traditional Tele, along with the hard rock and punch of humbucking pickups will find a rather ideal companion in this guitar. I like it for studio guitarists in particular since it gets you a professional brand along with a wide range of tone capability that can help you be more accommodating to clients.


...Wow! I JUST bought this electric guitar from a pawn shop for 37 dollars. I could instantly tell it was a 60's guitar, so I had to have a closer look. Mine has the tailpiece clam, but it was missing the whammy bar, so my dad built me one. It didn't even work, at all. A good cleaning fixed that though, it now works perfectly. Now it's fun little piece of history.
Adolph Rickenbacher was born in Switzerland in 1886 and emigrated to the United States with relatives after the death of his parents. Sometime after moving to Los Angeles in 1918, he changed his surname to “Rickenbacker”. This was done probably in order to avoid German connotations in light of the recently concluded First World War as well as to capitalize on Adolph’s distant relation to World War I flying ace Eddie Rickenbacker. In 1925, Adolph Rickenbacker and two partners formed the Rickenbacker Manufacturing Company and incorporated it in 1927. By the time he met George Beauchamp and began manufacturing metal bodies for the “Nationals” being produced by the National String Instruments Corporation, Rickenbacker was a highly skilled production engineer and machinist. Adolph soon became a shareholder in National and, with the assistance of his Rickenbacker Manufacturing Company, National was able to boost production to as many as fifty guitars a day.[4]
There are quite a few types of guitar shapes, with the most popular one being the dreadnought. However, contrary to acoustic guitars, many acoustic-electric variants come with some form of cutaway for better access to the higher frets. This can really come in handy for a wide range of techniques so you don’t have to play with your hand over the body, which can be uncomfortable.

it is my opinion that most classical and jazz guitar instructors at local colleges and music stores are better than tom morello and jack white. I like both of them and they are definitly innovators and very popular but my college classical/flamenco instructors were doing things incredibly more complex and emotional than anything ive ever heard tom or jack do. ask tom morello to play a segovia piece and see what happens. this list seems like it was made by a 17 year old kid who thinks he’s smart because he knows who robert johnson is, like putting him at #1 instead of hendrix is his “ace in the hole” of guitar knowledge. there is no real answer to the question “whos the best” but we guitarists will never tire of discussing it.
There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.
For notation and composition work, some of the common choices are Avid Sibelius 7, Makemusic Finale and PG Music Band-in-a-Box. Or, for DJ-ing and remixing, check out the Native Instruments Traktor series, Avid Torq or the software packages from Venue Magic. There truly are dozens of options available for you to take advantage of the benefits digital editing has to offer. Whether you're an independent artist mixing tracks on your own laptop or a professional sound editor working on a major TV series or indie film, the right music software is here to handle your needs.
Unabashedly brute class, with typical German overbuilding, the Schallers shown here are the Incredible Hulk of the bunch (Fig. 17). At a hefty 272 grams, they have the might to get noticed when you fasten them to your axe. If you have a guitar with a tiny headstock, you’ll hear and feel a difference with the Schallers. Whether or not you like the change is subjective, and it depends on the makeup of the rest of your guitar.

Every guitarist seeks to produce an expressive and distinctive tone. Unfortunately, figuring out what kind of gear you need can be a baffling proposition. Here are the three main equipment categories that comprise your music-making rig: your electric guitar, guitar amps, and effects pedals and units. These components all work together to create your sound. And because you can swap out equipment and change settings, the creative possibilities are virtually limitless.


It comes with a single coil pickup in the neck position and a humbucker at the bridge - switching between the two pickups gives you both a strat like sound and an LP like tone. The pickup selector is 3-way so you can play with both pickups at the same time. It sports a shorter 24.75" scale length and smaller 12" radius on the rosewood topped mahogany bolt-on neck with a 1.6875" nut width making it very playable and accessible to guitarists of all levels of experience. Many customer reviews suggest the Empire HG feels and plays like a more expensive guitar.

This category of effects pedals does what the name implies.  It tweaks the volume of your guitar signal in some fashion.  These typically come in this spot in the pedal chain (after everything but the time-based effects) so that any change to your volume is already receiving the effects of all the pedals before it.  You’ll be altering your entire signal minus delays and reverbs.
Shouldn't even be questioned. Ever hear of 'Voodoo Child'? Yeah, that was recorded in one take. & almost entirely improvised. & it's the greatest recording of an electric guitar being played EVER. & this isn't from some idiot who just listens to a lot of music, I play the guitar and have done a lot of reading and I know a few of your favorite guitarists would agree with me.

For one thing, the signal hasn't really "left the guitar" until the strings stop vibrating completely. In electrical sense, you can only say it's "left the guitar" for a given window of time. It's not unrealistic to think that what's happening ongoing in the guitar can affect the future signal (the pickups don't simply pickup an instantaneous signal then stop abruptly)


Fuzz gained much glory from the sixties and seventies when popularized by musicians such as Jimi Hendrix. Today, fuzz pedals have evolved into a staple for some bands and is capable of producing everything from a singing, warm sustain to a scratchy, velcro sound. The mainstay of a fuzz pedal's sound is produced by an electrical component called a transistor. Fuzz pedals today can be created from silicon transistors, or germanium transistors. Silicon is known to produce a slightly harsh or bright sound (some consider it sterile) while germanium typically accentuates the low end and produces a warmer sound. Just as extreme settings on a silicon fuzz pedal can easily produce a harsh, glass-like sound, extreme settings on a germanium transistor based fuzz can produce an overly warm, and muted tone.
Ibanez, a guitar and bass manufacturer, came to prominence as a result of music legends like Steve Vai and Joe Satriani using this brand. These guitars provide an exceptionally uniform neck action, a highly versatile tone, and top of the range pick up configuration. One of the main reasons that this brand gained popularity was the effective tone from cheap and mass-produced instruments. Heavy music is what they excel in, and metal enthusiasts have been loving Ibanez for decades now. They manufacture guitars for every style and genre. The most iconic model is the RG, but S series is also loved by all. They are also the makers of the 7-string guitar, with the first model Universe being made in the year 1990.
You planned out your hardware but it is best to make the purchase after you know you have the body and neck built and made sure they will fit together. If you have made it to that point, you are ready to put in the hardware components. Realize that you may need to do some basic soldering. If you need some guidance in that area, you can get it in a free course on metalworking.

I'll second the neck comment, conditionally. My first guitar was a hand-me-down Monterey archtop acoustic that had been my uncle's, and it have a sharp V neck. Out of nostalgia I bought another Monterey on eBay and its cross section feels like a tomato can lying in my hand. After a refret it plays smoother and easier than anything that fat has a right to. The original frets..., not quite.
Two of the strongest reasons to buy an acoustic guitar are user-friendliness and price. Some musical instruments are prohibitively expensive for beginners, and they’re difficult to learn, too. Not the acoustic guitar. Acoustic guitars are easy to learn, easy to carry, easy on the ears. And you can buy an acoustic guitar for an affordable price. The most difficult challenge in purchasing an acoustic guitar is finding the ideal fit for you. In this shopping guide, we will discuss some important elements to consider when browsing the acoustic guitar market.
After the wah, we have a compressor. A compressor improves the sustain available to your guitar by increasing the overall volume of any signal you feed into it. At the same time it helps to soften out any big volume spikes by clamping down the volume if it gets too loud. The ME-80 puts the compressor close to your guitar because any other effect placed before the compressor will be boosted in volume which will make the effect a lot harder to control.
Description: Body: Alder - Body Construction: Solid - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Goldburst, Redburst

I wish both of them bankrupt and disappear from the face of the earth to give way for new innovative brands with better pricing towards beginner musicians. I don’t care they are made on the blueridge mountains of Tennase or the shanty town in Shanghai. If they cann’t make a guitar to the new musicians for their liking, tradition or not they are garbage.
The Vox AC30CH Guitar Amplifier head contains all that gorgeous AC30 tone thanks to the classic 12AX7 tubes in the preamp and EL84 tubes in the power amp,. However, you have the option of hooking upo your own cabinet to mix and match the sound, or complete your set up with Vox V212C Speaker Cabinet or even the limited edition VOX V212C Extension Guitar Speaker Cabinet, White Bronco.
That's right. It's neck first, then bridge height, then intonation (at least the way I do it). Nut height can be taken out of the equation by putting a capo on the first fret, so it can be sorted out later if there are any problems with it. Of course if you were to put a capo on the first fret, you'd need to compare that with the 13th fret when setting up the intonation.
This is a tricky one, because I’d hate to see anyone miss out on a bargain. Unless you really know what you’re doing, buying a used guitar is a risky venture. Definitely, you shouldn’t buy a second-hand guitar without seeing or trying it out. Again, sticking with well-known brands is wise. Look carefully for worn fret boards (pitted holes under frequently-played notes) and grooves in the frets themselves. Check along the neck to see if it’s not too bent— it’s supposed to be slightly curved. Getting problems like these fixed professionally can be expensive and you might as well buy something new in the first place. The bottom line here is that high-quality instruments that have been properly maintained don’t lose any value. A good second-hand guitar should cost you as much as a good new one — but yes, those bargains are out there, too.
“Take a humbucker wound with 42-gauge wire as a benchmark. With an Alnico II magnet, it would have a warm, soft bass response, a very sweet high end and a slightly pronounced mid- range. Alnico III, funnily enough, is not quite as strong as Alnico II. So, the highs tend to be more muted and rounded. Probably the best way to imagine the sound of Alnico III is to think of the early 1950s when this form of magnet was very common. Think of the sounds of the jazz and clean guitar tones from that time – that plummy roundness.
Electric guitars vary by type. Some are designed for beginners, while others are customized for professional guitar players. Most of the major electric guitar brands are available in a variety of different styles, each designed to best suit a customers' specific playing needs. The most popular electric guitars have great rock sounds and the best bodies. On electric guitars, strings affect the sounds too. Ease and sound are certainly big factors to consider when choosing a new electric guitar.
Call of Duty: Black Ops III is the ultimate 3-games-in-1 experience. In Campaign mode, you must navigate the hot spots of a new Cold War to find your missing brothers. Players can play the campaign cooperatively or solo and are now always connected to the intelligence grid and their fellow operatives during battle. Multiplayer features a new momentum-based chained movement system, allowing players to fluidly move through the environment with finesse, using controlled thrust jumps, slides, and mantling. Black Ops III multiplayer also introduces the new Specialist character system, which allows players to master 9 characters' battle-hardened weapons and abilities through a challenge-based unlock progression system. No Treyarch title would be complete without its signature Zombies offering. "Shadows of Evil" has its own distinct storyline right out of the box, set in the fictional 1940s Morg City, where four particularly troubled individuals — the femme fatale, the magician, the detective, and the boxer — star in this film-noir inspired horror story.
Jackson is USA based guitar company founded by Grover Jackson. The company is the manufacturer of electric guitars or electric bass guitars. These electric guitars have a pointed headstock and are a typical rock style guitar popular amongst rock and metal band members. This is the style of electric and acoustic guitar that has a sleek layout and style. Not only do they provide great style but also deliver a higher sound quality. The starting price of a Jackson electric guitar is 12,500 INR approximately.
The EC-1000ET is an all-mahogany single-cut loaded with an set of EMG 81 and 60 active humbuckers, a comfortably modern neck and a high level of construction quality. Its key selling point, however, is a fitted EverTune bridge -  unlike other tuning systems, it doesn't tune your guitar for you or offer altered tunings. Instead, once set and tuned, it simply aims to stay there, thanks to a series of tension-calibrated springs and levers. We tried everything we could to knock it out of whack: huge, three-step bends, wildly exaggerated string stretching... we even put the guitar into a freezer. It came back perfectly in tune every single time.  What's more, a guitar that's perfectly tuned and intonated up and down the neck seems to play much more musically. We're not aware of any tone compromises, either. The EC sounds as full and aggressive as ever, with the more mellow tones of the neck EMG being pleasantly rounded, and all bereft of any metallic spring clank. If never going out of tune is important to you, this is one of the best electric guitars going.
However, it does give you a good flavour of the Martin and is a very playable plug-in, one of the best ways to see proper guitar emulation in action without paying for it. There are tab and effects options and a keyboard for playing it (we’ll assume if you can play a guitar, you’ll opt for the real thing, anyway). While it is free, we think you’ll be sorely tempted to upgrade, which will set you back $169.
• Now let's add some slap-back room delay. In the seventh insert (which, incidentally, comes post‑fader in Cubase, as does insert eight), go to Delay/StereoDelay. In the left channel, try setting Delay to 1/16T, Feedback to 6.5, Lo to 50, Hi to 15000, Pan to ‑100, and Mix to 20, and enable Sync, Lo Filter, and Hi Filter. Use the same values for the right channel, but with Delay at 1/16, Feedback at 7.3, and Pan at 100.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: sx","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"sx","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
Two other totally new guitars debuted in November of ’88, the ST-3 ($225) and ST-4 ($235). These were both Strats, with maple necks, rosewood fingerboards, volume and two tones, five-way select, chrome hardware, SAT non-locking vibrato, in black, white or red with graphics. The ST-3 had three single-coils, whereas the ST-4 had a ‘bucker and two singles. Cases or gig bags were extra.

Have you ever heard a bridge pickup that made a guitar sound like a giant mosquito attack? If you've run into this problem, The Tone Zone is the solution. The Tone Zone is hot enough to qualify as a high-output pickup, but it has a wider dynamic range - hard picking will produce a lot of power, and softer picking will be much cleaner and quieter. It's got tremendous bass and low-mid response to reinforce the bottom end and make the overall sound bigger. The highest single notes have depth, and chords sound huge. Patented dual-resonance coils reproduce more overtones than you'd expect from such a fat-sounding pickup. It makes a great match with an Air Norton.

As a rule, open-backed cabinets tend to have a different low-frequency characteristic to closed ones, partly because no air is trapped inside the box to act as a pneumatic spring. One characteristic is that low-frequency sounds, such as damped lower strings, cause the speaker cone to move a considerable distance, producing what is affectionately known as cabinet thump. In addition, there is interaction between the sound coming from the front and the back of the cabinet, which may cause some frequencies to cancel and others to be reinforced.

4x vintage revvo castors as used on loads of vintage cabs, combos ideal if you have a vintage cab and want period correct castors What you see in the photos is what you get, this is the second set I have for sale, the rubber wheels have split and their are chunks missing out of a few. (this is reflected in the price) this isn’t an issue if your cab is just going to stand in your front room looking cool. please do study the photographs Free postage in the UK Anything else just ask
Aimee, by Pure Prairie League, Love,Me by Collin Ray, Where have you been, Kathy Matea, Landslide, Fleetwood Mac, The Reach, Dan Fogelburg, The Seven Bridges Road, The Eagles, Longer, Dan Fogelburg, Fire and Rain, James Taylor, Your The Lucky One, Allison Krause & Union Station, Time in a bottle, Jim Croce, Whenever You Come Around, Vince Gill, Man of Constant Sorrow, (as performed by Union Station),
Guitar distortion is obtained and shaped at various points in the signal processing chain, including multiple stages of preamp distortion, power valve distortion, output and power transformer distortion, and guitar speaker distortion. Much of the distortion character or voicing is controlled by the frequency response before and after each distortion stage. This dependency of distortion voicing on frequency response can be heard in the effect that a wah pedal has on the subsequent distortion stage, or by using tone controls built into the guitar, the preamp or an EQ pedal to favor the bass or treble components of the guitar pickup signal prior to the first distortion stage. Some guitarists place an equalizer pedal after the distortion effect, to emphasize or de-emphasize different frequencies in the distorted signal.

The full-size Davidson guitar features a maple fretboard consisting of strings that sound very pretty good once you have tune it right out of the box. This Davidson full-size electric guitar comes with die cast tuners designed to keep it in perfect sound shape, followed by a practice amp having an overdrive body, which makes the practice exercise easy and fun-filled. The amp can be tuned with an iPhone App and by the time you set this baby to work, you will surely get your neighbors screaming for the peace.

{ "thumbImageID": "4003-Bass-Midnight-Blue/513600000089000", "defaultDisplayName": "Rickenbacker 4003 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Blue", "sku": "sku:site51274034491813", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Midnight-Blue-1274034491813.gc", "skuImageId": "4003-Bass-Midnight-Blue/513600000089000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Midnight-Blue/513600000089000-00-60x60.jpg", "imgAlt": "" } , { "name": "Jetglo", "sku": "sku:site51274034491793", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Jetglo-1274034491793.gc", "skuImageId": "4003-Bass-Jetglo/000000107918146", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Jetglo/000000107918146-00-60x60.jpg", "imgAlt": "" } , { "name": "Mapleglo", "sku": "sku:site51274034491783", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Mapleglo-1274034491783.gc", "skuImageId": "4003-Bass-Mapleglo/000000107918138", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Mapleglo/000000107918138-00-60x60.jpg", "imgAlt": "" } , { "name": "Fireglo", "sku": "sku:site51274034491780", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Fireglo-1274034491780.gc", "skuImageId": "4003-Bass-Fireglo/000000107918062", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Fireglo/000000107918062-00-60x60.jpg", "imgAlt": "" } ] }


Taper – the ratio of wiper travel to the resistance between the wiper and the outer lugs. Logarithmic pots (also known as "log" or "audio" pots, and designated with the letter A) are generally used for volume controls, due to the human ear's response to sound pressure being roughly logarithmic, whereas tone controls can employ both logarithmic and linear pots (designated with the letter B), depending on personal preferences and wiring arrangements.[5][6] Reverse audio pots are sometimes used for volume controls on left-hand guitars, but this is not widespread due to the relative rarity of such pots.

The central idea behind Vintage® is to offer accessibly priced, vintage-looking guitars with great finishes, quality parts, and features that are typically found on guitars costing upward of a thousand dollars. So, to design an industry-leading line of professional but affordable guitars, Trev Wilkinson joined forces with JHS over a decade ago. These instruments now include class-leading Wilkinson®-designed hardware.
Shure SM57.Sennheiser MD421.For a rock sound, many (though not all!) engineers will use a dynamic mic placed close to the speaker (sometimes on its own, sometimes in combination with other mics) like this Electrovoice RE20.Why such a strong preference? These days, force of habit has got to be part of the answer, but there is also a lot about the microphone's frequency response which suits guitar recording. For a start, the sub-200Hz response roll-off reduces low-end cabinet 'thumps', which might otherwise conflict with the kick drum and bass in the mix. This also compensates for proximity boost when the mic is used very close to the speaker cone. However, there's also a slight 'suckout' at 300-500Hz, an area where muddiness can easily occur, and a broad 2-12kHz presence peak, which adds bite and helps the guitars cut through the rest of the track.
The specs for this stripped-back Singlecut are identical to PRS's gloss Standards; the difference is in the paint - or, rather, the lack of it. Instead of that faster S2 gloss, here we have a nitrocellulose satin finish that doesn't bother with grain filler - you can easily see the body wood's grain and feel it on the neck - for a thinner finish, which will wear and age the harder you play it. Plus, thin finishes don't choke any vibrations or resonance. Along with the dot-only fingerboard inlays, this Satin Singlecut looks very workmanlike, but the build and parts still deliver the goods. The body is one-piece mahogany, the neck three-piece. The bridge is the USA Stoptail, the locking tuners, like the pickups, made in Korea to PRS specs. The pattern regular neck is a nice mainstream handful, and setup and intonation are, as ever, top-drawer. Mahogany guitars can be dark-sounding and here, yes, there's a throaty midrange focus, but a clean-edged ring and resonance that provides clarity and punch, much like the pickups that nail an almost P-90-ish sizzle and classic-rock poke. The four-control layout means there's plenty of adjustment, and the coil-splits on the tone controls add authentic single-coil cut. Clean, low, medium or high-gain, this one's a banker: the most rock-out, resonant blue-collar PRS we've ever played, and that's why it's one of the best electric guitars, especially at this price point.
Paul Reed Smith’s offering to pro musicians with exacting standards, the PRS McCarty 594 takes its name from two things. The first is its scale length of 24.594 inches and the second is that it’s a 1959-spec guitar with four knobs. According to Paul Reed Smith, this vintage-inspired instrument aims to recreate the most desired classic Gibson tone, that of a ‘59 Sunburst.
In addition to the 1/4" input for your guitar, you may want to consider amps with better connectivity features like those with built-in USB output for direct recording, footswitch input, aux input for jamming with tracks, and headphone output. Speaking of headphone out, there are some amps that come with built-in speaker cabinet simulated outputs, this subtly changes the resulting sound much like the amp cabinet would without having to actually use the speaker. There are also a number of newer guitar amplifiers that come with Bluetooth connectivity for streaming audio and for software control.
Heres a few no one has brought up … very under rated or possibly not well enough known …. Jeff Beck , Steve Vai , BucketHead , Ry Cooder , Eric Johnson ,Gary Moore , Ritchie Blackmore , Andy Summers ,John Petrucci ,Vivian Campbell , Paul Gilbert , Uli John Roth ,Robert Fripp ,Akira Takasaki ,Steve Howe ,MICHAEL ANGELO BATIO ,CHRIS IMPELLITTERI ,ZAKK WYLDE , Vinnie Vincent , Stevie Stevens , and my choice for best overall would definetely be Randy Rhoads…
Straight away, we have to talk about how good this guitar sounds. Lots of low-end and mid-range acoustics tend to do one tonal area well, but the Martin DRS2 does an awesome job all round. It’s got deep, booming lows, while the highs remain nice and crisp. And of course, all of this is available acoustically or electrically in the dreadnought cutaway acousticelectric guitar.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"performance level","prop11":"intermediate","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
The functional attribute of this guitar is not the only factor that it gets credit for. The instrument comes with a neck & body binding together with trapezoid inlays that produce the classic looks that you would always love to display on stages. These are features that are truly amazing especially when you are under the stage lights doing a performance both during the day as well as at night. Such nice appearance will obviously give you more courage to keep on soldiering on with your ambitions of becoming a professional guitarist.
All of the guitars on this list except for the Blueridge BR-160 are equipped with an electronics system that make them stage- and studio-ready. You can simply plug and play when you need to perform in front of an audience in a crowded or big venue where there’s a lot of ambient noise. If you don’t need amplification – for example if you’re just practicing at home – these guitars sound great unplugged as well.
Next up we have the specialty electric guitars. This category consists of several different types of electric guitars, but we’ll start out with 12-string electric guitars. The fact that the low E, A, D, and G strings all feature higher octave strings while the B and high e strings both have additional strings that are tuned the same, electric guitar 12-string models have a distinctive shimmer and richness to them that guitar players love. Guitar players who favor heavier genres like death metal or hard rock may want to add a 7-string, an 8-string, or even a 9-string electric guitar to their rig for when they need some extra low-end growl and power. Other specialty guitars include baritone guitars, double neck electric guitars, and pedal steel guitars & lap steel guitars.
×