However, these two companies were not always in as direct competition as might be assumed; yes they both made guitars, basses and amplifiers, but both tended to play to their strengths; Gibson's expertise was it's luthierie; they stuck to high end electric-acoustics, semi-acoustics and skillfully made solid bodies, whilst Fender excelled at electronics; they made amplifiers and easily built solid body basses and guitars.
In October 2017, Gibson announced plans to relocate its Memphis operations to a smaller location and plans to sell the Memphis property. Gibson opened its Memphis facility 18 years before, which occupies just a portion of a massive 127,620 square foot complex. According to the Memphis Daily News, Gibson plans to search for a new facility for its Memphis operations and will stay in the current spot for the next 18 to 24 months. The facility, which sits across from the FedExForum along South B.B. King Boulevard, is expected to list for $17 million.
I found myself un-obligated, bored and holding a fist full of cash one Friday afternoon, so I wandered into my local guitar shop. With a new found love of single coil pickups I had been eyeballing the Gretsch and Guild hollow bodies unfortunately too poor to actually buy one. On this afternoon, however, I played the Godin 5th Avenue Kingpin. It was love at first strum. Mine is called Cognac Burst. The satin finish on these instruments is beautiful, and give it a vintage, played look. This guitar has a really nice feel in terms of the neck and the thickness of the body. I have fairly long fingers and the neck is comfortable to play. It feels to me, a bit like the thicker necks on the Les Pauls of the late 50s. When I got the guitar, the shop said they'd dial it in for me for free, but frankly, I have no complaints as it is. With the classic style floating bridge you can drop the action impossibly low before you start to get fret buzz. After I brought mine home, I did just that and it plays like a dream. The frets are finished well and there is a bevel on the edge of the fret board and frets that keep them out of the way if you're in the habit of sliding your hand up and down the neck quickly. The Kingpin has a warm mellow tone when unplugged that is perfect for playing jazz and blues. I also enjoy the lower volume of the guitar since it has f holes when I play later in the evening. Plugged in, the P90 kills and sounds good clean and driven. It also retains that warm, mellow tone when played without distortion. I haven't had any trouble with feedback as I tend to keep the volume a bit lower for small spaces. My one complaint is the hideously ugly case, that costs 80 bucks. It's like its made of extra tough styrofoam. I understand they were going for lightness, but it's just ugly. All in all though, this guitar is a great choice and plays as well as my Gibson Les Paul and my buddies Gretsch 51... whatever.
Some large combo amps and large speaker cabinets have ball-bearing-mounted caster wheels to make it easier to move them. All combo amplifiers and speaker cabinets have some types of carry handles, either a folding handle on the top or recessed handles on the sides. There are two types of recessed handles: some equipment has folding, spring-loaded metal handles, with the spring holding the handle flush against the chassis until it is pulled out for use; the second type is handles that are non-moving, and which are flush with the surface of the amp/cab, but with a hollow area behind the handle for the hand to go. In both cases, the handle does not project out beyond the amp/cab, preventing the handle from catching on items during transportation and/or being damaged.
For players who want an incredible palette of tones for a low entry cost, this is the amp for you. Experiment with 128 tonal presets, or create your own sounds with digital models of over 200 amps, cabs and effects. If you’re into playing different styles of music and you don’t want to invest in different rigs, look to this versatile solid state amp first.
A switch is a device that segments networks into different subnets. Segmenting the network into different subnets keeps one network from overloading with traffic. Therefore, a switch forwards all data in the data layer and sometimes the network layer as it filters the data. A switch allows a connection to be established and it terminates a connection when there is no longer a session to support. Prior to switches there were hubs. Hubs also connected multiple independent (connected) modules in a network, but they were not as efficient as switches. Since most switches work in Layer 2, and not in Layer 1 like a hub, they are better at filtering data. A switch looks for Ethernet MAC addresses, keeps a table (the bridge forwarding table) of these addresses, and navigates the switch between ports. The switch prevents collisions and gives full bandwidth to each connection at the switch port. Switches save bandwidth by only sending traffic to destinations that have traffic. When a switch switches Ethernet frames, they monitor the traffic for the response from that frame and see what device, on what port, responds to that flooded frame. There are different types of switches that range from "dumb" switches that lack manageability and can monitor only 4-8 ports to "managed" switches that can get statistics on switch traffic, monitor connections, and hard-code up to 96 port speeds and duplex. Then again, there are "chassis-based" switches with blades or cards that perform not just switching, but routing and intrusion detection too! If you are interested in this, look into Cisco's Catalyst 6500 Series. Another type of switch preferred by large enterprises is the "Layer 3 Switch," because it has the functionality of a router .

In typical pedal effect chains you will most likely be running cable lengths that are much longer than 5.5 meters. The ME-80 allows you to keep your tone pure when running lots of effects. You can run a cable up to 5.5 metres into the input of the ME-80. The multi effects engine processes up to 8 effects in its internal signal chain. Then the ME-80 outputs your guitar signal as a 2,000 Ohm low impedance signal allowing you to run a much longer cable to the amplifier.

YouTube has become well known for its tutorial videos and how-to clips on every subject on the planet and guitar lessons are no exception. Videos don’t provide the same kind of interactivity as our Uberchord app, which can listen through your device’s microphone and give you instant feedback on your playing. But we agree that YouTube clips can let you actually see and hear what’s going on—it can make a difference when things get confusing.
As we mentioned, this is both a multi-effects unit and an amp modeler. Like the Boss ME-80, you can use it in a regular editing mode where you set up your signal chain using buttons and knobs, or “Pedalboard Mode” which when activated lets you turn 5 effects on/off via the 5 footswitches along the bottom, much like if you had separate pedals on a pedalboard. This is a nice bonus if you play live and want that immediacy. To sculpt your sounds, you use the small up and down arrow buttons to cycle through your effect types, or slots. You’ve got WAH, COMPRESSOR, DISTORTION, AMP/CABINET, EQUALIZER, NOISE GATE, CHORUS/FX, DELAY, REVERB, and EXPRESSION (which sets what your expression pedal is used for, like wah or volume) available for use. For each type, you can cycle through which effect models you want. There are a ton to choose from, over 70 by our rough count. The DigiTech RP500 probably has the most comprehensive list of all the classic effects, from Tube Screamers, to Pro Co RAT, DS-1, Fuzz Face, Boss CE-2 Chorus, EHX Small Stone Phaser, and many more. All the classic amp models are there too, like Vox, Marshall, and Fender, all with appropriate cab models. If you have your own amp or just don’t care for the amp and cabinet modeling, you can bypass it which leaves you with just stompboxes and effects.

The only guitar instrument I can think of that is NOT sampler-based and that actually sounds decent would be RealGuitar. It's not the most realistic (IMO) and it's $160+. But if you ask most people for recommendations on realistic guitar instruments, you will hear stuff like Shreddage, Electri6ity, ProminyLPC, Lyrical Distortion, Strawberry Electric Guitar from Orange Tree... all Kontakt libraries, and all undoubtedly better than the 3 products you listed in your initial post, two of which are simply synths and not at all meant for realistic playing!
The SD is a classic. This had a more exaggerated Jazzmaster shape than the T-60. It had a dramatically swept back lower horn, and an offset pair of waists, looking as though it’s been slightly melted. These had bolt-on necks with the elongated Strat-style head, with round logo stickers. A rectangular plastic control panel was mounted above the strings, with large thumbwheel controls and on/off rocker switches, while a large-ish pickguard was mounted under the strings. The controls on the SD-4L were especially interesting, taking their cue from the Italians, no doubt. The thumbwheels were for volume and tone, while there were a total of six rocker switches. Four of these were on/off for each of the four pickups, but in between were two more. Their function is unknown, but a good guess would be phase reversal between the front and back pairs of pickups. Both models had the rectangular fingerboard edge inlays. With “L” designations, both had vibratos. These consisted of a fairly simple bar for string attachment with a series of springs behind it, all covered with a hinged metal cover. The handle was extremely long. Pickups were the beefy tall rectangular type with metal cases and black plastic center tops with exposed pole pieces (these could be screws or squares). The SD-4L had four pickups, in two pairs, while the SD-2L had two. If I couldn’t have a Spectrum 5, I’d be looking for one of these (I am!).
Guitar pedals and other effects, including an early version of the wah-wah pedal used by Jimi Hendrix and the Tone Bender fuzzbox pedal, a Vox variation on the famous original Gary Hurst Tone Bender (used by Jimmy Page of Led Zeppelin and Jeff Beck of the Yardbirds as well as The Beatles, Spencer Davis and others), were also marketed by Vox and later on manufactured in Italy.

When making solder joints to switches and pots, the lug and wire should be heated by the tip of the iron and the solder pressed (or flowed) onto the joint. In this manner you can avoid cold solder joints as both components are properly heated prior to the application of solder. Melting solder on the tip of the iron does not insure the actual components are being heated properly.

Even though pickups are the main component tasked with interpreting string vibrations and indirectly turning them into sound, your choice of wood still matters. Although the effect is subtle, certain woods will give you better sustain, more definition, and so on.  And in the end it's the accumulation of all of these choices that determine your ultimate sound.

John and I weeded out a couple of guitars that arrived in far-from-playable condition because we think every guitar should be at least reasonably playable when you buy it. Avi Shabat agreed, saying, “The more messed up a guitar is when I get it, the more I have to charge for setup.” We also didn’t have the short-scale guitars set up, for two reasons: First, we think a guitar for kids—one that’s likely to be purchased at a low price and given as a present—should play acceptably right out of the box with no setup; second, all of the short-scale models we received did play very well out of the box, and all were equipped with strings of the same approximate gauges.
A variation of the wah pedal is the auto wah. Not to be confused with a city in Canada, auto-wah effects do the same things a wah does, but without the foot treadle. Usually, you can adjust the attack time (how fast the tone shifts toward the treble) and the depth of the cycle. Some auto-wahs also let you set a constant up and down motion that's not triggered by the note. You’ll find auto-wahs included in many multi-effects processors. One of the newer developments in this area is the Talking Pedal from Electro-Harmonix. While eliminating the moving parts of traditional wahs, it produces amazing male-vocal and vowel-sound effects that harmonize with your guitar’s notes. A fuzz circuit lets you dial in more growl and grit.
Here we have a sweetie from the late 1970s folks they just don' make them like this anymore this is the RARE High End Lawsuit 5053 model this model was discontinued decades ago. This guitar was made nearing 40 years ago of woods said to have been aged 20-30 years at time of its being built.... food for thought. Fresh release from the JVGuitars Vintage Vault is a beauty seldom seen in this configuration and in this condition we have collected many 5053 Alvarez lawsuit era guitars not all are like this one is SPECIAL this is a must see and hear beauty! Based on the Martin top of the line D-45 this Japanese crafted D-45 copy was crafted with top workmanship only the top luthiers were allowed to use this precious expensive aged Brazilian Jacaranda rosewood on this guitar its back - sides - fingerboard - bridge and headstock are ALL made of this exotic tone wood, the neck looks to be a high grade Honduran Mahogany and proudly still displays it's original imported by Saint Lewis Music gold Medallion and fancy SLM truss rod cover see pics The top is Solid Sitka spruce this guitar is detailed and adorned with much perfling and inlay top to bottom including its fingerboard and headstock, this example is in top playing condition and cosmetically excellent as well and is VERY RARE in deed to find one so excellent. The neck is a nice handful like the old Martin a medium slim profile, its beautiful fingerboard is excellent as are its frets.... Headstock is striking with its A over A inlay in mother of pearl, tuners are original and still doing an excellent job, This guitar has the tone only the Exotic wood series guitars can produce unique rich and dynamic with excellent volume and clarity a fingerpickers delight. Just freshly received a JVG setup with a new Martin Bone & compensated sadle along with a fret dress and a new set of Martin 80/20 Phosphorius Bronze strings 12's x 54 for a substantial tonal upgrade from its old plastic. Overall rated 9.0 +++/10 well preserved it is over 40++ years old and has been lovingly played and well taken care of all these years is not new or mint of course it clearly is well above average used / vintage This comes with a good hard shell case ... and will protect it for the next 4-5 decades. Wonderful players guitar in excellent vintage condition when will I ever see another like this??? its here as of today ask if serious about owning this gem Thank you for your interest in our vintage guitar contact Joe to buy this guitar at: Pics soon to come.
The volume pedal is about as simple as a pedal can get. It is basically an external volume knob that you work with your foot. They are an excellent way to control the volume of your rig and can be placed at different places in your guitar chain. When placed first for example it can be great for volume swells (as we will see), reducing your amp gain by acting like your guitar’s volume knob. If placed after your gain section it will bring down your overall volume without reducing changing your tone or gain. You can really experiment with the placement of a volume pedal to see what matches your needs.
Perry has also endorsed an affordable replica version of the Boneyard guitar made by Epiphone that carries the same USA made Burstbucker pickups as the Gibson model. It is a customized Gibson B.B. King “Lucille” guitar; however, instead of the black finish and “Lucille” signature on the headstock, Perry’s guitar features a white finish, a “Billie Perry” signature on headstock and an image of Billie Perry on the front of the guitar.
Aimee, by Pure Prairie League, Love,Me by Collin Ray, Where have you been, Kathy Matea, Landslide, Fleetwood Mac, The Reach, Dan Fogelburg, The Seven Bridges Road, The Eagles, Longer, Dan Fogelburg, Fire and Rain, James Taylor, Your The Lucky One, Allison Krause & Union Station, Time in a bottle, Jim Croce, Whenever You Come Around, Vince Gill, Man of Constant Sorrow, (as performed by Union Station),
In August ’68, Ovation added three more models – the Hurricane 12-string and the Typhoon I and II basses, all with chrome hardware. The K-1120 Hurricane was a Tornado with the extra strings, advertised as offering a “harpsichordian” effect. This lasted only a year and was gone by ’69. The initial Typhoon basses had slightly smaller bodies than the guitars, with stubbier, more flared horns. These lasted only a year until ’69, when the body styling changed to that of the Gibson-style guitars. The K-1140 Typhoon I bass had one Schaller pickup and a covered bridge/tailpiece assembly. The K-1240 Typhoon II was a two-pickup model with a three-way select. This was also called the Williwaw (“mountain wind”) in some Ovation literature, but it was never really called that. The Typhoon I was only available in the stubby body and was discontinued in ’69. The Typhoon II changed model number in March ’70, becoming the K-1222. This model made it until June ’72.
Some of the most well-rounded acoustics on the market. They may not boast the character of some of the big names like the Martins and Gibsons but they fit in most musical situations just as well. Remember that Takamine achieved its success by copying Martin guitars - and they did a good job. Also they have some of clearest and cleanest electronic preamp systems on the planet. In fact, they essentially pioneered the style of electronics that we see in most guitars today. While you can spend an arm and a leg on one, you don't have to. I've had Takamines under $1,200 that played phenomenally. Don't make your purchase until you've tried one out. – offers PCB projects to build guitar and bass effects, and synth modules. All PCBs are professionally manufactured, and include soldermask, a silkscreened component legend, and plated through holes and pads. They are designed to be easy to build, provide simple and clean wiring, to work well with your other pedals, modules, and instruments, and most of all to sound great and provide sounds and features not available in commercial designs. Each PCB comes with a PDF document with wiring diagram, schematic, build notes, and large modding sections with details on how to perform a variety of mods to tailor the design to your needs/taste.

Replacing or repairing knobs. Knobs are covers for your pots so you can easily turn them, if any of your knobs are unable to be correctly placed on try due to broken or enlarge holes, place a good amount of tape around the pot's shaft that covers it and try to keep the the knob on the tape. If you cannot do so then you may need to replace your knobs.

We are still in the testing phase with this system, and our representatives are still finding out how to give you the best possible experience. Therefore, it may happen that we do not understand you (please speak clearly in either German or English only), that equipment is being tried out by other customers temporarily, or that there are problems with the connection. Please do not hesitate to give us feedback whenever anything like this happens, so that we may learn from this and improve our service.
"Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired
{"pageName":"[gc] pdp: palmer palmer electric solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113503875;;;;evar65=null-Guitars-Palmer","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}

I remember choosing a floating tremolo equipped electric guitar as my first ever purchase, and I ended up being so frustrated at how hard it is to keep the guitar in tune and how complex string replacements were. To make the long story short, I felt relief when I traded it up for a simpler Fender Strat. These days, floating tremolos have gotten better and easier to setup, but I'd still recommend a guitar with basic stop tail piece or tremolo bridge for beginners - just so you can focus on learning the instrument and worrying about string setup when you have more experience.
Nobody ever forgets their first guitar. It's an exciting moment that signifies the beginning of a life that's filled with musical enjoyment. For this reason, you need to be sure that the guitar you purchase is more than worthy of making your talents fully realized. And thankfully, there is no shortage of astounding guitar value packages to choose from, right here.
I took it into a local shop to have it looked at, turns out the neck was warped, leading to problem #2 above. I ended up returning it and ordering the same model from a different retailer; although the new guitar didn’t have the same neck problems I ended up having to replace the bridge with a Mastery Bridge (see issue #1, above, the Mastery Bridge cost me another $200 or so, including labor for installation).
: : "Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired

One of the most useful features of guitar-amp simulation plug-ins is that they can help mask some quite serious problems with whatever you're putting through them, without necessarily changing it beyond all recognition. I've found that even relatively clean settings can disguise such horrors as clipping on transients to a surprising extent. If you're ever faced with a badly recorded guitar part (even one that's played on an acoustic guitar, or through an amp), try putting it through an amp modeller.
Supro guitars were first produced in the 1930s by the National Dobro Corporation (rebranding as Valco in the 1940s), with the first solid body electrics produced in the early 1950s. The company produced guitars with numerous names on the headstock, with Supro and National being the best known. They produced some interesting guitars in the 1960s, including some of the earliest fiberglas-bodied instruments; financial pressure necessitated a merger with Kay of Chicago in 1967, but the new comapany only managed to limp on until 1968, before folding and ending all guitar production.
What people may not know is that they have a very affordable line of entry-level guitars.  This line continues the legacy of craftsmanship and prestige that comes with owning a Taylor. Whether you look into their line of Baby Taylors – 3/4 sized guitars that play better than many full-sized budget guitars, or you look into their entry full-sized acoustics, Taylor will not disappoint you.
To finish, here's one damn good last trick: doubling an electric guitar with... anything else. I know that's pretty vague but I must say that I had a hard time putting it any other way. The goal is to listen to your guitar sound and analyze it to find out what it lacks. Then you "only" need to find a sound that can fill this "hole." For instance, a friend of mine once told me he doubled a crunchy guitar sound with a sample of a lightbulb being rubbed on his boot with the goal of emphasizing the strumming sensation. Much less arcane, there's the famous example of the particularly "fat" riff on Radiohead's Airbag. If you listen to the intro, you can hear that the riff is being doubled with a cello, which obviously adds a lot of the breadth to the sound, as I'm sure you'll agree. I would love to keep on giving you more ideas in this regard, but the scope of this method is so wide and open that the only thing I can tell you is to let your imagination fly, experiment and have fun!

My Les Paul never did sound quite right. It was always off somehow. I discovered it had the same problem like yours with the intonation being off the scale. Once I followed your guide, I discovered the neck adjustment was far too loose, and gapped it properly. Shazaam, the intonation problem disappeared, and now it plays like butter with all the notes dead on! U R the MAN!

If ever there was a candidate for compression, bass is it. This instrument has a wide dynamic range (even more so when slap techniques are employed), but it usually needs to sit at a very steady level in the mix. But should compression be applied during recording, to control the levels going down, or later, during the mix, to insure the best blend in the track? Well, the answer is probably both, but with potentially different approaches to squashing the signal. During recording, a Limiter might be the ticket, to control transient peaks that might overload ADCs, producing pops and spikes that can ruin a take. A classic fast VCA compressor/limiter (like the dbx 160) could be employed to handle peaks, without really reducing the player’s dynamics at this early stage. Then when mixdown rolls around, more gentle compression can be introduced (like the smooth squash of an optical compressor like the LA-2A), to tighten up the dynamics, as needed for that particular mix. Applying the right kind, and amount, of compression/limiting at all stages will assure you get nice clean recordings, that can be properly squeezed into the mix when the time comes. 

While Laney brand might not sound as familiar to the “uninitiated”, this brand has been producing quality amps for very good prices. The  LG12 is a combo amp with 12-watts. While 12-watts isn’t much it seems to kick in a punch when needed (and plus, you want it for practice and more practice amps don’t have a lot of wattages). Apart from that this combo offers  LG12 12 single channel with switchable drive, CD input, headphone socket (a much for practice) as well as Bass, Middle and Treble control. The tone of this amp is pretty crisp and clean. That’s partly due to the 6.5″ custom-designed speaker. The speaker is not only functional but looks pretty nice. Looks wise this model has top mounted construction, rubber feet for sturdiness and leather handle for ease of transportation. Apart from being a great practice amp, it is also great if you travel around and want a model that can take a punch or two.

The guitar is hand-made by Martin's top luthiers, using exotic cocobolo wood for the back and sides, mixed with a more conventional solid sitka spruce top. As expected from a high-end instrument, this guitar features impressive visual appointments, most notable of which is its ivoroid binding, beautiful rosette and fretboard inlays. While its price tag and looks may push you to just hide this guitar in the closet, know that this instrument is built to make music in the road or in the studio. Martin employed modern bracing and construction techniques to ensure the guitar stays reliable, beautiful and great sounding for a long time. Those that are lucky enough to own this guitar have themselves a treasure that they can pass down to the next generation of players.
You are sure to find a Gibson in any guitar brand comparison list that you come across. This guitar manufacturer is the oldest producer of solid-body electric guitars. The first guitar was manufactured by Les Paul himself, and the company's signature model is, in fact, also a Les Paul model. It was the first company to introduce the double coil pick ups or the legendary 'humbucker' for rock music. The guitars by Gibson made rock and roll possible. Like Fender, Gibson is also a universally popular guitar brand whose guitars are known for their high treble and melodious tones. The company also has a bass series. It has remained consistent as far as styles and designs are concerned. Other famous electric guitars from Gibson include the SG, Flying V, Explorer, ES-335, and Firebird, and classic acoustics include models like the Hummingbird.
In 2008, Gibson USA released the Slash Signature Les Paul Standard, an authentic replica of one of two Les Pauls Slash received from Gibson in 1988. It has an Antique Vintage Sunburst finish over a solid mahogany body with a maple top. Production was limited to 1600.[35] The Gibson Custom Shop introduced the Slash “Inspired By” Les Paul Standard. This guitar is a replica of the 1988 Les Paul Standard and it features a carved three-piece maple top, one-piece mahogany back, and rosewood fingerboard, with a Heritage Cherry Sunburst finish. Two versions were made available—the “Aged by Tom Murphy,” aged to resemble the original guitar (a limited number of these were signed by Slash in gold marker on the back of the headstock), and the “Vintage Original Spec,” created to resemble the guitar as it was when Slash first received it.[32][36]

These 1950s models featured the thicker, more sustaining tone of Gibson’s humbucker pickups with the original units known as “Patent Applied For” (PAF) pickups. These PAFs were designed by Seth Lover while working for Gibson in 1955 (U.S. Patent 2,896,491), and debuted on Les Pauls in 1957. This innovation became a standard pick up design for Gibson, and subsequently, many other guitar companies followed suit, outfitting their electrics with copycat versions of the humbucking pickup altered to avoid infringing Gibson’s patent. Gretsch had their Filtertron pickups, and when Fender entered the humbucker market in 1972, it was with the radically different Fender Wide Range pickup. “Standard” humbuckers from other guitar manufacturers and third party replacement pickups from the likes of DiMarzio and Seymour Duncan were only offered after Gibson’s patent had expired.
Processed Pitch Shifts: Few pitch-shifting algorithms are transparent enough to allow you to transpose anything by more than a couple of semitones without obvious side-effects. If what you're processing is going through an amp modeller, however, you can get away with much more radical changes. You can even do effective swoops and dives in pitch by progressively increasing the amount of pitch-shifting you apply to a note, and pitch changes of an octave or more can sound good, although they probably won't sound natural at these extremes. Sam Inglis
This guitar master knows wood. He understands its rhythm. He's a master woodworker and began building acoustic guitars when he was a child. "I couldn't afford the ones I wanted," he says, "so I built them." Perretta Guitars is the result of his experiments. But it wasn't until he toured with the guitars that he'd receive some of the best advice of his life from George Gruhan, a guitar master in Music City, whose customers included Eric Clapton, Neil Young, Johnny Cash and George Harrison: "If you want to work in this business, do repair work."

So far so obvious, right? But what's easy to miss is that this same scale shape also gives you A major and D major - they are the same chord shape, just starting on different strings. Now it's true that they're not quite the same physical shape, but that's just because of the funny little tuning 'kink' between the G and B strings (See Why is the guitar tuned like it is?). Once you iron that out, E, A and D are the same shape, as are the barre F and B chords.

Recently while cruising around EBay I was able to find pretty strong evidence that the 700 and 800-series Kents were made by Kawai. Or maybe... the necks of the 700 and 800-series Kents and the Kawais were made by the same manufacturer. I don’t know if Kawai kept the factory that made Teisco operating after it was acquired. It appears that Kawai had more experience building hollow-bodied guitars than Teisco. So I call the 700 and 800-series Kents Made by Kawai. You can call them Made by Teisco if you want. Of course, the possibility exists that they were both made by an entirely different company. Who knows? The 1960’s were like a ‘wild west’ period of Japanese guitar making.
One unique application of a fuzz pedal involves starving the pedal of voltage--which will produce a scratchy, velcro-like tone. This is desirable by some musicians because it is a highly unique sound and is often employed by more avant garde musicians. This sound can be achieved by purchasing a power supply with a sag output, or using a nearly dead battery, although the pedal won't last long when using that method.
In the mid-1960s, as the sound of electric 12-string guitars became popular, Vox introduced the Phantom XII, which has been used by Tony Hicks of The Hollies, Captain Sensible of early English punk band The Damned and Greg Kihn, and Mark XII electric 12-string guitars as well as the Tempest XII, also made in Italy, which featured a more conventional body style. The Phantom XII and Mark XII both featured a unique Bigsby style 12-string vibrato tailpiece, which made them, along with Semie Moseley's "Ventures" model 12-string Mosrite, the only 12 string electric guitars to feature such a vibrato. The Stereo Phantom XII had split pick-ups resembling the Fender precision bass, each half of which could be sent to a separate amplifier using an onboard mix control. Vox produced a number of other models of 6 and 12 string electric guitars in both England and Italy.
Home>Guitars, Amps, and Effects >Electric Guitars PrintRefine your searchBy CategoryElectric Guitar Bags (55)Electric Guitar Cases (94)Electric Guitar Packs (5)Electric Guitar Parts (99)Electric Guitar Pickups (203)Electric Guitars: 6-String (946)Electric Guitars: 7-String (59)Electric Guitars: 8-String (13)Electric Guitars: 9-String (1)Electric Guitars: 12-String (5)Electric Guitar Strings (112)Electric Travel Guitars (2)Left-Handed Electric Guitars (70)Signature Model Electric Guitars (55)By BrandBabicz (8)Charvel (28)D'Addario (35)D'Angelico (33)Darco (1)Dean (34)Dean Markley (2)DiMarzio (39)DR Strings (10)Dunlop (3)Elixir (10)EMG (42)Epiphone (88)Ernie Ball (41)Ernie Ball Music Man (30)ESP (86)EVH (13)Fender (176)Fishman (39)Fret-King by Trev Wilkinson (3)Fusion (1)Gator (23)GHS (6)Gibson (167)Godin (2)Graph Tech (9)Gretsch (58)Guild (11)Hagstrom (15)Hamer (5)Ibanez (166)Jackson (78)Kramer Guitars (4)Levy's (2)Line 6 (6)Mojotone (35)Mono Cases (9)On-Stage (3)Peavey (1)Planet Waves (1)PRS Guitars: Paul Reed Smith (62)Reunion Blues (8)Reverend Guitars (11)Schaller (2)Schecter (77)Seymour Duncan (75)Silvertone (3)SKB (13)Squier (27)Steinberger (3)Sterling by Music Man (17)Supro (3)Taylor Guitars (7)TKL (5)Tronical (3)TV Jones (7)Ultimate Support (1)Vorson (1)Washburn (1)World Tour (8)Wylde Audio (6)Yamaha (5)Play as you Pay® Eligible4-Payment Plan (1022)6-Payment Plan (1133)8-Payment Plan (1053)12-Payment Plan (856)By Price$0 - $24 (154)$25 - $49 (25)$50 - $74 (23)$75 - $99 (107)$100 - $149 (132)$150 - $199 (93)$200 - $299 (100)$300 - $399 (80)$400 - $499 (92)$500 - $749 (210)$750 - $999 (267)$1000 - $1999 (304)$2000 - $2999 (99)$3000 - $3999 (66)$4000 - $4999 (35)$5000+ (13)Availability In Stock Items (1549)Clearance Gear (278)By ConditionNew (1631)Warehouse Resealed (11)Blemished (256)Scratch and Dent (22)Viewing products that ship to: Customer Kudos "The extended payment plans at zZounds are superior to the other online retailers. The others require you to have a credit card issued by them. Also I've never had a problem exchanging or returning defective gear and the exchange item is in the mail once the returning item is picked up by the shipper." - Customer on October 14, 2017 1 MILLION+ Happy Customers learn more Guitar·Bass·Keyboard·Recording·Computer Audio·Live Sound·Drums·DJ·Accessories
In this style, the guitarist aims to render an entire song — harmony, melody and bass — in something like the way a classical guitarist or pianist can. Chord roots cannot be left to the bassist in this style. Chords themselves can be used sparsely or more densely, depending on both the individual player and his or her arrangement of a particular piece. In the sparse style, a full chord is often played only at the beginning of a melodic phrase.[4] The denser chordal textures, in contrast, approach chord soloing (see below). A third approach is to maintain a steady, busy bass-line, like a New Orleans pianist. Here, no more than two or three notes are played at a time, and the full harmony is indicated by arpeggiation. Exponents of this style often come from a country, folk or ragtime background, such as Chet Atkins, although it is also sometimes employed by straight-ahead jazz practitioners, for instance Martin Taylor. Chord-melody is often played with a plectrum (see Tal Farlow, George Benson and others); whereas fingerstyle, as practised by Joe Pass, George van Eps, Ted Greene, Robert Conti, Lenny Breau or hybrid picking as practised by Ed Bickert, Laszlo Sirsom and others allows for a more complex, polyphonic approach to unaccompanied soloing.
In terms of the electronics, we are once more faced with a System 66 unit. You get a three-band EQ, a built-in tuner, and a versatile mid-range slider that allows you to really tune those mids to perfection. Overall, if you appreciate a comfortable guitar that sounds good and will take on any stage performance you can dish out, this Yamaha is something to look into.
Solid state amps have many advantages: they are cheaper, lighter, and require less care than a valve amps (which eventually will need new valves, for instance!). Vox, Line 6 and Hiwatt make really good solid state amps that you can gig with without worries. They are not necessarily "worse" amps. The Rolling Stones, Status Quo and many other big acts have used solid-state amps at some point. They're also quite popular with jazz guitarists.

The first successful guitar pickup was developed in the early 1930’s by Rickenbacker® to help amplify Hawaiian lap steel guitars which were popular at the time. The first pickups were single-coils and while they do a good job of picking up the guitar signal they are also susceptible to picking up interference from nearby electrical devices. The Gibson® humbucker (US Patent 2896491) was developed in the 1950’s to eliminate the “hum noises” resulting from electromagnetic interference. The humbucker uses two coils and a pair of pole pieces (having opposite magnetic polarities of each other) for each string. The coils are wound and connected to each other in such a way that the current produced by the moving guitar string in the two coils adds up (in-phase), while the current produced by electromagnetic interference in the two coils cancels (out-of-phase). Not only does the humbucker drastically reduce noise from interference, but it also has a different characteristic sound. The single-coil pickup is commonly considered to have a thin, clear and bright (more treble) sound, while the humbucker is known to have a full, but dark (less treble) sound with more overall signal output.
I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.
The goal is to find the body shape and configuration that appeals the most to your eyes and ears. The most straightforward choice for beginners will be the solidbody for its durability. Players who are looking to expand their sonic palette are usually the ones who will take interest in semi-hollow and hollow body guitars. For more information on this topic read The Different Types of Electric Guitars Explained.
Harmonizers – Commonly used for vocal harmonies, these pedals can do a lot to beef up your sound. You can also use them in creative ways, like Steve Vai and Robert Fripp, who have been known to disable the main signal altogether so that their music is coming only from the pitch-shifted output. Using a modern harmonizer can be as easy as setting it to the key you’re playing in, and many even support more than one harmony at once.
{ "thumbImageID": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "defaultDisplayName": "Epiphone Les Paul Standard Plain Top Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Gold Top", "sku": "sku:site51331921974967", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top-1331921974967.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Gold-Top/517413000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51331921974725", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue-1331921974725.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Pelham-Blue/517413000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cardinal Red", "sku": "sku:site51331921975042", "price": "469.00", "regularPrice": "469.00", "msrpPrice": "782.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red-1331921975042.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Cardinal-Red/517413000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51273888006873", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony-1273888006873.gc", "skuImageId": "Les-Paul-Standard-Plain-Top-Electric-Guitar-Ebony/517413000035000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
There is no real rule on what fretsize is best – it is purely personal preference.  To find out what size is right for you or for a specific guitar and application, you may have to try similar guitars with different fretsizes.  I have heard many differing opinions on fretsize over the years; some say tall wire is too bumpy for sliding into position or that tall wire causes them to play sharp (from overly pressing down the strings, these players are used to feeling fingerboard surface under their finger tips).  Some say that fretwire below a certain height is difficult to bend on.  Bending and fretting hand slurring techniques are easier when the string can be addressed towards the middle of the ball end of the fingertip so that it may be pushed and pulled from the side rather than fretted from directly on top by the lower part of the fingertip. Some folks like a low fretwire as it feels very smooth to them and they don’t do a lot of slurring techniques.
Hi, it seems like the problem lies in your hands and not in the guitar itself. If you are a beginner, you must start slowly and build up strength in your hands. A good way is to simply buy a "stress ball" or other hand exerciser. A "Gripmaster" one that lets you work each finger individually, which can be very useful, they are available for about $20 at most music stores.
It's not subjective. When you're setting up a guitar you measure the height of the strings, typically you're at about 4/64" for the high E and 5/64" for the low E. You can go above or below the recommendation but if you go too low you can start to get a bit of fret buzz. How low you can go is not a function so much of what guitar you own, but how level your frets are and your neck relief. Most good guitars can be set up to play "fast". Obviously they don't get faster when you paint them fluorescent orange, or make the headstock pointy.
I feel that most of the bad reviews are due to inexperience with electronics. Frustration caused by not knowing what the parts are or how they work. Missing parts is never a good thing, so I guess I was lucky that my kit came with everything. If you do buy this kit and did not manage to get it working please understand that you have probably made a simple mistake.

I disagree about Martin being THE BEST ACOUSTIC GUITAR. While Martin is an excellent guitar that is definitely ONE of the best! Taylor is THE BEST FOR THE HIGHER END TO MID PRICE RANGE! A decent TAYLOR will bea Taylor will beat the brakes off a brakes off the same Martin, because they SOUND BETTER and they can be used for more than one or two styles. If you are playing county music the Martin is better, but Taylor will play a lot better sound way better on every other kind of music styl! Buy a TAYLOR

A more successful early electric was the Ro-Pat-In "Frying Pan" guitar. This was played lap-steel style, and was the earliest I know of that uses something close to the magnetic pickups as they exist in modern guitars. This was conceptualized by George Beauchamp in 1931... he played Hawaiian style, thus the lap steel design. He met Adolph Rickenbacker and together the two worked out the details of the pickup system, and put this into production in 1932... the company name was eventually changed to "Rickenbacher".

Before taking the plunge, make sure that you have the necessary tools to build the guitar of your dreams. Most kits will require you to have screwdrivers, pliers and soldering iron for the assembly process. While others require more, like wood glue, bandsaw and other wood routing tools. Once you've decided on the finish, you'll also have to get finishing tools like sandpaper, wood sealant, primer, paint and more. It is also recommended to have a dedicated room or space for you to work on, a nice working table would also make work a bit more easier.
Where can you find one? My guess is that FIDELITY was a housebrand (like Holiday or Silvertone), and these might be Valcos or some other maker. But I have since seen 2 or 3 of them on Ebay, not going for too much money. Also, there are several other brands (and no-brands) that look much like these, so keep your eyes peeled, don’t pay too much, and score a little gem that will have other guitar players saying “what the hell is that” and have your significant other shaking his or her head when the UPS/Fedex people come knocking.
Read Full Review The brand ESP that we all know today started its roots as a shop in Tokyo Japan selling custom replacement parts for guitars that quickly gained a good reputation for its high quality. Soon came after the brand manufactured fully assembled guitars that burst in the trash metal seen of the 80’s signing in big name bands to carry their guitars and basses.
Pedals that fit this description usually end up being more of a problem than anything else, but that’s not the case with Behringer. We get rudimentary but functional controls, which allow you to dial in a decent variety of reverb effects. Same goes for shaping said reverb. You have a certain amount of maneuvering space to work with, which might not seem like a lite when you put this thing next to a boutique model.
The second issue of the Les Paul guitar was introduced to the public in 1954. Called the Gibson Les Paul Custom, this entirely black guitar was dubbed the Black Beauty. The Les Paul Custom featured a mahogany top to differentiate the instrument from its Goldtop predecessor’s maple top. It also featured the new Tune-o-Matic bridge design and a pickup with an alnico-5 magnet, P-480, in the neck position. In addition, since 1957, the Custom was fitted with Gibson’s new humbucker pickups, PAF,[16] and later became available with three pickups instead of the more usual two. The three pickup model retained the standard Gibson 3-way switch so not all pickup combinations were possible. The neck and bridge-only settings were retained, but the middle switch position was set to enable the middle and bridge pickups. A common modification was to restore the standard neck/both/bridge switching combination and add a switch to enable the middle pickup on its own.[citation needed] The guitar is wired as a “normal”2 pick up Les Paul except there is a master volume , master tone, (for front and back pu) while the middle pick up has its own volume / tone. this allows the middle pu to turned out of the circuit or mixed with the other two. allowing many different tones.
Hi Dan! Thanks for the kind words! As somewhat of a newbie, you may find a semi-hollow-body guitar more flexible and versatile, especially if you are still finding trying to figure out what genre you are going to focus on. If you are set on the hollow-body go for, but ,if you are on the fence, the versatility of the guitar is something to consider. Those are my thoughts. Good luck!

As the ’70s dawned, the market for electric guitars began to revive, significantly but conservatively. Gibson retracted its hopes for the flagship SG and reintroduced the Les Paul in ’68. Fender, likewise, was moving away from Jazzmasters and Jaguars, concentrating on its earlier successes, the Stratocaster and Telecaster. Paced by Shiro Arai of Aria, who’d been inspired by the reissue of the Les Paul (a “copy” of the ’50s classic), Japanese manufacturers were beginning to explore making copies of popular American designs, and the “copy era” was getting underway.
Guitar Tricks is a step-by-step learning system that’s designed to make learning guitar easy. The Guitar Fundamentals level 1 training curriculum has been totally reworked, improved and only recently re-released. Nothing else is as beginner-friendly as Guitar Tricks. In addition to working your way through the fundamental lessons of the Core Learning system you can explore great songs arranged with beginners in mind.

Add a maple top to the mahogany body, as do a great many Les Paul models, and a blend of characteristics comes forward. The mahogany’s depth and richness remain, but the maple provides added snap, clarity, and definition. It also tightens up the lows and adds more cut to the highs. For many players this sonic evolution is highly desirable, whereas others might prefer the smoothness of the pure-mahogany design.
The simplicity and ergonomic design of the Pacifica PA012 body mirrors that of the PAC112. It is also available in exciting colors to match it perfectly to the player preference. Tonewood for PA012 as specified on the Yamaha catalog can either be in alder, nato or agathis, while the PAC112 is only made in alder wood. Neck for both guitars are made in maple with a satin finish then it is overlaid by a 22 medium frets rosewood fingerboard marked by inlay dots.
Most Fender guitars are equipped with single-coil pickups. They have a lower output level than dual-coil pickups but sound brighter and sharper, which is perfect for clean and crunch sound. Both the Telecaster and the Stratocaster generally have an ash or alder body, a maple bolt-on neck and a rosewood or maple fretboard. Some other Fender models were also moderately successful (the Jazzmaster, the Jaguar or the Mustang). Squier, a brand that originally manufactured strings, was bought by Fender to become a sub-brand and sell guitars manufactured in Japan from 1982 onwards.
The first electric instrument amplifiers were not designed for use with electric guitars. The earliest examples were portable PA systems, which appeared in the early 1930s when the introduction of electrolytic capacitors and rectifier tubes allowed the production of economical built-in power supplies that could be plugged into wall sockets, instead of heavy multiple battery packs, since rechargeable batteries would not become lightweight until many decades later. While guitar amplifiers from the beginning were used to amplify acoustic guitar, electronic amplification of guitar was first widely popularized by the 1930s and 1940s craze for Hawaiian music, which extensively employed the amplified lap steel Hawaiian guitar.[2]
16-Series: Style 16 guitars were first introduced in 1961. Later, they were the first production Martins to utilize sustainable, native woods such as ash and walnut, as well as the first to implement hybrid A-frame “X” bracing. Today, these models use solid woods such as mahogany, East Indian rosewood, koa, sapele and maple. Models include DC-16RE Aura, OMC-16E Koa, D-16 GT, 000C-16RGTE Aura and the J12-16GT, a 12-string jumbo-size guitar with the series 16 appointments. Most -16 series instruments use the Martin long scale, 25.4″.
When Levon Helm of The Band sang "I pulled into Nazareth, was feelin' about half past dead" in "The Weight," he wasn’t alluding to a weary pilgrim’s desire for salvation. Rather, he was singing about a mythological trip to Nazareth, Pennsylvania, home of C. F. Martin & Co., makers of Martin flat top acoustic guitars. Founded in 1833 by a German immigrant named Christian Friedrich Martin, whose father was also an instrument maker, Martin...Continue Reading
There are times when a single-coil just doesn’t have enough twang. I’ve encountered Strat neck pickups that are just too wooly to provide me with that saucy, SRV/Hendrix-style rhythm juice. Or, sometimes an anemic bridge pickup just needs an extra dose of snap to push it into Tele-like territory. If so, this simple mod could be just what you’re looking for.
I taught myself how to play on a beat-up old acoustic decca my mom let me have. I couldnt begin to guess how old it is, but it must be just that; its serial number is 129! It has a pretty decent sound, but i really should replace the strings. it has 18 frets and marks at 5 7 9 and 11. Theres no pickgaurd, the body is orangish wood with thick finish and the neck is some sort of dark wood. The damn thing gave me headaches when i was learning because the strings were so far from the fretboard and all incredibly thick too. It came with extra strings and medium and heavy picks. I dont think it would be worth too much now, especially in its condition.
The Basic Principles: A Valve is an extension of the light bulb. Theoretically inside the valve is a vacuum. The hot filament is called ‘Cathode’ (Let’s not forget a T.V. is a’ Cathode ray tube’ ). Around the outside of the Cathode is a cylindrical metal tube called ‘Anode’. When a +Voltage is placed on the Anode and a -Voltage placed on the Cathode, a large current can flow between them, but not the other way around.
On amps, I think there are alot of affordable yet fantastic amps released in 2017. Try checking out the Boss Katana series, Orange Crush, Marshall Code series, Line 6 Spider V, Fender Mustang which are more in the budget range. Most of the amps I mentioned here are modelling amps, so I think you’ll have a fun time fiddling around with all the pokery jiggery. These amps will hopefully keep you occupied for awhile :)
With JH’s encouragement, I’ve made the decision to produce my own line of premium acoustic guitars, handbuilt as before, to the same high quality, and with an extended option list including other rare woods, finishes, and trim options. The brand I will be using is “Madeleine”, in honor of my late granddaughter who passed away May 2, 2011 at age 1 month.

We’d recommend starting off with building a clone, or modifying a cheap pedal that you already own – This is why we see so many of the famed Boss DS 1 mods. A lot of the cheap “starter” pedals have a wide array of modifications that can be done. However, if you do not have an old effect pedal laying around, look into getting a pedal clone kit. I recently built a ProCo RAT Distortion Pedal Clone by General Guitar Gadgets, and these kits can really help you succeed in understanding how guitar pedals are built.
20 pages, black and white with color front cover. In the middle of 1981, Rosetti took over distribution of the Gibson line in the UK. Rosetti were a very big name in Britain, having distributed Epiphone since at least 1963, as well as Hagstrom and others. This catalogue was produced at the tail end of 1981, and introduces a number of models to the UK, such as the MV-II, MV-X guitars and the Victory basses, the GGC-700 and the Flying V bass. Some of these models were so short-lived that they were actually never included in US brochures. The cover image (reproduced in part here) showed some of the earliest demonstration models, including a Victory with a highly unusual white scratchplate.
Unassigned maker badge names are AGS, Alex, Andre, Aquila, Asco, Avon, Axiom, Bradley, CG Winner, Clear Sound, CMI, Columbia, Commodore, Cortley, Crestline, Crown, D. Lewis (?), Danelectro, Dynelectron (some), Diplomat, Dixon, Dorado, Eagle, El Degas, Exceltro, Exper, Encore, Fandel, Garzia, Goya, Grant, Grenn, Laguna, LTD, Magnum (?), Maier, Monroe, Marchis, Mark II, Masaaki (?), Matador, Norwood, Palmer, Prairie, President, Rodeo, Sanox, S.G.C., Splender, Stella, Targa, Taro, Voxton by Vox, and Yoshi. Some of these badges are attributed to the importer as the 'maker', which is untrue. It's possible that some of these badges were made by smaller Japanese manufacturers that have faded into history.

The Kay Guitar Company has been the major producer of guitars since 1890. Most players do not realize that in 1928, Kay was the first company to start production of electric guitars in the USA. From 1952 through 1964, The Kay Guitar Company excelled at producing quality professional electric guitars with unique designs and features. The Kay Gold Line professional series became synonymous with that rich gutsy Blues/Jazz sound that eventually became known as Rock and Roll. This unique Blues sound was not available from any other guitar of that time. For the past decade, vintage Kay instruments have been fetching high prices and have had increasing interest from collectors and players because of the cool look and unique Blues/Jazz sound. Part of this special Blues sound came from the triple chamber design and the hand-wound blade pickups on the Kay K161V Thin Twin and the Kay K162V Electronic "Pro Bass" Guitar.

In 2008, Gibson USA released the Slash Signature Les Paul Standard, an authentic replica of one of two Les Pauls Slash received from Gibson in 1988. It has an Antique Vintage Sunburst finish over a solid mahogany body with a maple top. Production was limited to 1600.[35] The Gibson Custom Shop introduced the Slash “Inspired By” Les Paul Standard. This guitar is a replica of the 1988 Les Paul Standard and it features a carved three-piece maple top, one-piece mahogany back, and rosewood fingerboard, with a Heritage Cherry Sunburst finish. Two versions were made available—the “Aged by Tom Murphy,” aged to resemble the original guitar (a limited number of these were signed by Slash in gold marker on the back of the headstock), and the “Vintage Original Spec,” created to resemble the guitar as it was when Slash first received it.[32][36]
An acoustic guitar is a guitar that uses only an acoustic soundboard (the top of an acoustic guitar) to help transmit the strings energy into the air in order to produce its sound. The soundboard will add various tonal qualities due to its own mix of tonewoods and bracing, and the soundboard also has a strong effect on the loudness of the guitar. Without a soundboard, the string would just cut through the air without actually moving it much because it is large, the soundboard can push the air, creating a much louder sound. In addition, the acoustic guitar has a hollow body that resonates, increasing the efficiency of its lower frequencies.
If you’re a beginner you might not feel like you know enough to be able to test play different guitars, but play whatever you know and see if you notice any difference. If you only know a few chords, or even “Smoke on the Water”, then play that, it’s better than nothing! Don’t care about the staff hearing you play, they’re used to it and are probably just happy to have a potential customer.
Clean or replace jacks. To clean jacks use solvents such as contact cleaner or other solvents as a spray and spray the metal parts, clean any excess solvent with a rag. To replace jacks first obtain a similar one that complies with your guitar, then soldering in properly. Work in well-ventilated space to avoid harmful fumes from solder or solvents.
Semi-hollow body electric guitars are basically a middle ground between a solid body electric and a fully hollow body electric guitar. Jazz, country, and rock guitarists alike may gravitate towards semi-hollow body electric guitars for several reasons. One of the main reasons is that semi-hollow body guitars still produce that rich, resonant sound of a hollow instrument, but they typically have a solid or sometimes chambered center block in between the top and back. This design helps fight off that unwanted body-resonant feedback we spoke about before while even adding some extra sustain. Gibson offers a wide selection of semi-hollow body electric guitars, which include the iconic Gibson ES-335. Guitar brands such as Gretsch and Ibanez are also widely recognized for their semi-hollow body electric guitars.