It worked like all amps: the guitar in my hands translated the vibrations from its strings through magnetic pickups into a voltage that traveled through the guitar's wiring and out the main 1/4" cable, then the amp picked up the signal and sent it through a coil of wire around a much larger magnet than those in the pickups, and the vibrations of that magnet shook the cone of the speaker, producing sound. The specific vibrations corresponding to those voltages created specific frequencies of vibration through the air, and my 10-year-old ears were hooked.
This is breathtaking and very inspiring pop-rock music with great energy and bright motivational atmosphere. Main instruments are electric guitar, digital synth, bass, strings, piano and drums. This exciting and uplifting track could be a perfect choice as background music for any video production, multimedia projects, Youtube channels, narrations or life stories, films and other projects.
Capture ideas and create songs easily with a riff-based workflow, loop recording, automatic track creation (4 tracks), 7 guitar-oriented effects, support for amp models (AmpliTube, PodFarm, StudioDevil and others), 1 InstantDrummer (expandable), and more. Stay in the creative flow with tools that look like gear, and create complete songs without putting down your guitar!
I have 12 years whit my SL3 Jackson and 12 years whit my RG7420, so far I have replaced both POTs on the jackson, the frets are really worn out and FR chrome is peeling.. great guitar crappy components. oh, I havent had to replace anything on the Ibanez yet other than the stock pickups for something better. both are made in Japan =). So dont tell people that Ibanez sucks before actually owning one...
In launching the AZ series, the goal was not to merely create a completely new guitar model, but to sculpt a great guitar that can foster the potential of the modern ?third phase' while maintaining traditional elements. Even though Ibanez is thought of as a modern guitar brand, it has decades of accumulated knowledge and a history of pushing the boundaries. The AZ series carries with it all of the hallmarks of these tried and tested Ibanez qualities. The harmonic balance between bridge and pickups, nut and machine heads, neck and fret material all work together in order to help the guitarist create their desired sound. From A to Z, there is no aspect of guitar making that we ever overlook. This tradition has been passed down masterfully to the AZ series.

When recording an electric guitar, the amp is the instrument as far as the mic is concerned, and mic position is important. While a lot of sound comes direct from the speakers as you'd expect, a significant level is also emitted from the back and sides of the box via panel vibrations. Also, an open-backed cabinet throws about as much sound out of the back of the box as it does out of the front. Choosing a mic for recording electric guitar isn't difficult, as virtually any decent mic of any type can be made to produce usable results. If I were to generalise, I'd say that British recording engineers tend to use cardioid, dynamic models while American engineers seem to prefer capacitor microphones. The dynamic mic produces a solid sound with a smooth high end, while the capacitor mic's increased definition produces a brighter, more open sound when used in the same way. However, the mic position has just as much bearing on the tone as the mic itself.
Did I say WoW....your going to love this one...Here we have a VERY rare GREAT FIND and premium example at that this over 35 year old vintage mandolin has absolutely beautiful flamed AAA Fiddle grade Maple to both the back chevron 2 piece & sides .... this piece is simply gorgeous and has an aged & wonderfully grained figured Sitka spruce top this a VERY High Quality. This is a Japanese made Artist grade Mandolin from the prime Japanese Law-suit era ... the very talented Luthiers built this example... this one was made in the mid 1970's at the famous Ibanez factory in Japan this example is cleverly labeled with a beautiful mother of pearl logo then unheard of " CARLO ROBELLI "... This is a Gibson exact REPLICA of the " F Style " MANDOLIN this M-700 M700 ACOUSTIC Mandolin in excellent vintage condition WoW! its so nice dare I say Near Mint...its over 30 years old and has that aged and mellowed tone and has emerged as a great sounding professional quality constructed PRO level beauty that is available for a fraction of what the very same vintage Ibanez or Aria m-700 Logo'ed Mandolin will cost... ( same factory built those to ) same luthiers same materials... as seen with the great original golden plush lined hard shell case.. all & all one of the best sounding & playing mando's available under $1600.00 vintage F style and beautifully flamed & figured Maple ..looks like old school nitrocellulose lacquer but no visible checking cracks but just one short 3" finish check on back and is almost impossible to see... a few buckle mars on back but so faint not threw finish and again almost impossible to see... guard is also in top shape not all scratched up..this baby is in under the bed for 30 years condition it looks more like its one year old condition wise as it is actually 30+ years old...as you can tell the finish has that aged patina and warm appearance of a vintage Mando.. here is a great one w/ its original hard shell case ..WoW! Its being cleaned up now and is looking as new... the guard's glue just came loose so it will get cleaned prepped & re-glued and ready for another 30 years. I will also be restring her with a new set D'Addario strings we have in stock and set her up... she will ring like a sweet bell and be ready to record with or tour. Copy & paste this link to view many new pics of this beautiful Vintage Japanese crafted Mandolin... https://picasaweb.google.com/gr8bids/70sCarloRobelliFMandolin?authkey=Gv1sRgCNbp6p6_1cicsQE#slideshow/5588480984817011186.
Ovation Guitars proudly welcomes home legendary artist Richie Sambora with the launch of two new signature guitars benefitting youth music programs. The famed Bon Jovi songwriter/guitarist and 2018 Rock n’ Roll Hall of Fame inductee will donate royalties from the sales of the all-new Richie Sambora Signature Series Elite Double Neck guitar to the non-profit organization Notes for Notes which builds, equips, and staffs after-school recording studios in Boys & Girls Clubs after school facilities across the United States for youth to explore, create and record music for free.
I have been playing guitar for over 40 years and purchased Taylor's, Gibsons and Fenders as well as many others. This Godin company understands value and passes that along to its customers. Fine tone when played acoustic or threw an amp. The wood tone and workmanship are awesome for this or any price point. You will not be disappointed with this guitar, it is a great value.
As the name implies, TheFretWire DIY 175 kit is based on the popular ES-175 hollow body guitar, following its shape and configuration, but using more cost effective materials. More importantly, it lets you customize your own archtop as you prefer - you can make it into a classic jazz box, or add some cool paint jobs to turn it into a rockabilly style instrument.

1.  And now for my favorite customer fix… A re-glued bridge on an acoustic using Gorilla Glue and wood screws.  This is an epic failure on so many levels.  Wood screws should never be used to hold a bridge on (Gibson, take note) .  And anyone who has ever used Gorilla Glue knows it has no place in guitar construction/repair.  It’s a polyurethane glue that works very well in certain circumstances (water contact, etc.) but the foaming that occurs when the glue is curing can create a humongous mess.  Fix:  Take the bridge off and refinish the top.  What could have been a $85.00 repair is now over $400.00.
You can simulate any sound of three pickup guitar with two pickup guitar and vice versa, the only problem is getting it with proper wiring or customizing it. Even they will not sound the same may be close enough for your application or even better. And don't forget about potentiometers problem. The 250K potentiometer will cut some frequencies from humbuckers while 500K make singles brighter than they are by default. It may be not a problem or critical to choosing favorite tone :D
Hendrix was known for a lot of things.The beautiful chord embellishments on Little Wing, the grit of the solo in Voodoo Child screaming off of his strat pickups, his cover of the Dylan song All Along The Watchtower, and the backwards solo in Castles Made of Sand, but known as a great innovative guitar player over and over again. His short but explosive career influenced numerous artists for many years past his death and continues to influence musicians today. To make such a difference in such a short amount of time truly earns Jimi a spot as number two. But…then you may ask, “Who is deserving of number one?!”
That said, information regarding Asian-guitar production from the 1970s and early 1980s is cloudy at best. Most lower-end Lotus-branded guitars were produced by either Samick or other factories in Korea or Indonesia. However, some of the higher-end Lotus instruments were built by the Cort factory in Korea or by one of three factories in Japan: Yamaki, Matsumoku, and Moridaira.

An equalizer adjusts the frequency response in a number of different frequency bands. A graphic equalizer (or "graphic EQ") provides slider controls for a number of frequency region. Each of these bands has a fixed width (Q) and a fixed center-frequency, and as such, the slider changes only the level of the frequency band. The tone controls on guitars, guitar amps, and most pedals are similarly fixed-Q and fixed-frequency, but unlike a graphic EQ, rotary controls are used rather than sliders.
Anyone who has a Tempest XII probably needs a pick guard. I have a 1966 which was in the case for much of the past forty years. The plastic apparently dried out and "shrunk," causing the two corners to pop off at the screws near the neck. Some guitar repair technicians are good at fabricating pick guards, but most are either woodcrafters or electronics geeks. Please advise how your search has gone. Maybe I'll replace mine, too. RED
This mod works great for Strat-type pickups or aftermarket Tele-style reproduction pickups that don’t already have a plate. Some pickup companies make P-90s that don’t have a metal base plate, and these can be twang-ified in this way, too. The best part is that, if you don’t like the sound, you can just peel the plate off and be right back where you started.
Dobro was founded by John Dopyera and a brother after he left National Guitar in 1928. The history of Dobro and National is long and complicated. Dobro merged with National in 1934. They contracted with Regal to build their guitars and for a time Regal was the exclusive builder of resonator guitars. They lost the rights to the names during World War II which led to a number of other names. The Original Musical Instrument Company was the last name used with Hound Dog being a brand of resonator guitar when Gibson eventually purchased them in 1994. Gibson currently sells Dobros (single cone, spider bridge resonator guitars) and Hound Dog brand guitars. Epiphone has also made resonator guitars.
Ideally, a steel string acoustic guitar or an electric guitar would be the best for you if you want to learn to play blues and classic rock. Classical guitar because of its nylon strings and its warm tone is best played by fingers. If you need help in what kind of guitar to buy, check out our article on different kinds of guitars available for beginners, this might help:
Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
Stripped holes: small holes without much tension on them (i.e. pickguard screws) can be repaired with super glue (gel stuff). Put some glue in the hole and screw the screw in about 1/2 way. The glue will not stick to the plated screw, and will form threads. More severely stripped holes or holes w/ more tension on them (i.e. strap button screws) require pieces of toothpick be glued in w/ wood glue. Larger holes w/ alot of tension (i.e. neck mounting screws) require the hole be drilled out and a hardwood dowel glued in place.

Much like the FG series model we have talked about above, this guitar is made solid and has passed Yamaha's unforgiving quality control. You know precisely what you're getting and how it'll perform because each guitar in this line-up is exactly the same as the next, with no discernible variation. They went with a nice solid Sitka spruce top in combination with a rosewood back and sides. This should tell you right away that the guitar is going to be very responsive aurally.
Use songs as vehicles, certainly, and have fun playing them, by yourself, with friends, but get to realise that knowing what one chord sounds like after another will help you to play a new song almost spontaneously - a great trick to impress. Just learning songs will not give you much of a clue how music actually works, so you're better off using them to help learn music. obviously, you'll learn some songs to play along to, or with mates, but that's not the be-all and end-all. And it's not only the chords: learn pentatonics and you'll realise how many great guitarists use them in solos. Gilmour, Clapton, etc. Sunshine of your Love is pure blues scale notes!
So you want to shred without all the lettuce. You want to strum without losing all your Benjamins. You want an electric guitar without spending loads of money…is what these metaphors mean. Probably over-explaining it now. If you’re looking for an affordable electric guitar that doesn’t sacrifice quality, you’ve come to the right place. Let’s take a look at ten notable electric guitars for under $500.

High frequency tweeters, typically horn-loaded, are included in some bass instrument speaker cabinets. Vox's 1960s-era "Super Beatle" amplifier was an early enclosure that used horn tweeters. During the late 1960s Acoustic's 260 Series guitar amp used a treble horn in the dual 15" loudspeaker 261 guitar enclosure, and Kustom's nearly 5-foot-tall (1.5 m) 2J + 1H guitar enclosure used two 15" speakers and a 15" diameter treble horn. Horn-equipped cabinets were not available for bass players until much later.
In the Popular Mechanics lab, we played the Xbox 360 version of Rocksmith 2014 with a pair of Epiphone guitars: The Les Paul Junior that comes with the game bundle, and a $1000 Les Paul Custom that the company sent us for testing, and which, sadly, we have to send back. The thing that sets Rocksmith apart from other rhythm games is the "Hercules" adapter. It's a cable that plugs into the output jack of any guitar or bass and connects it to your console via the USB port. You use the ordinary console controller to navigate menus.

Acoustic necks are usually listed as 12- or 14-fret necks. This number refers to the number of frets above the guitar body, not the total number of frets. On a 12-fret neck, the 13th and 14th frets will be on the body, and, thus, harder to reach than on a 14-fret neck, where they are extended beyond the guitar body. If you have small hands, look for an acoustic guitar with a smaller diameter neck.
Epiphone began in Manhattan in 1903 when Anastasios Stathopoulo set up shop (not as Epiphone). When Anastasios died of cancer in 1915 his son Epaminondas (Epi) took over the business. Epiphone and Gibson had an on-going rivalry first in banjos and then in archtop guitars. Gibson finally acquired Epiphone in 1957. Although Epiphone guitars continued to be made in America for a time after the acquisition (often in the same factory, side-by-side with similar Gibson models), Epiphone is now a Gibson brand for overseas, imported lower cost guitars, though many are based on Gibson designs.
The Ibanez GRX20ZBKN is part of the GIO series developed for players who want Ibanez quality in a more affordable package. The guitar is suitable for all types of music, but often a favorite of rock, metal and shred lovers. It features an alder body and a maple neck which feels sleek and fast. Great for moving quickly up and down the neck for those fast riffs and licks. A solid good looking low budget guitar for the beginner and intermediate.

Three CraViolas were offered. These had a strange asymmetrical shape with a pear shape, no waist on the bass side and sharp waist (and almost cutaway taper) on the treble. Soundholes were D-shaped with fancy rosettes, with a pointed tortoise guard on the steel-stringed versions. These had slotheads with a Woody Woodpecker-like peak pointed bassward. The bridges were similar to the mustache version on the Country Western. The CRA6N Classic ($150) had a yellow spruce top and full-grained Brazilian rosewood body, no inlays or pickguard. The CRA6S Steel String ($160) was a similar steel-string with pin bridge and diamond inlays. The CRA12S 12 String ($175) was the 12-string version.
I'd never heard of this brand but was recently in a store in North Carolina looking for a nylon string guitar. The salesman asked me if I was "open minded" and if I'd be receptive to trying a brand that I probably had never heard of. He handed me a really pretty instrument with a very different looking headstock. I immediately figured he was showing me a very expensive instrument. I asked how much it cost, but he didn't answer. He simply replied "Try it, then let me know what you think." I had no idea how much this guitar would cost, and honestly I hate guessing games, but the guitar was really beautiful. I played several classical guitars there that day. A Yamaha, a Cordoba and an Alvarez, but the Merida was unquestionably the best sounding (and looking).
During the 1960s, many musicians[who?] preferred Martin guitars built beforeWorld War II to more recent guitars of the same model. The pre-War guitars were believed[citation needed] to have internal bracing carved more skillfully than later instruments, producing better resonance, and tops made from Adirondack red spruce rather than Sitka spruce. Additionally, 1970s Martin dreadnoughts suffered from poor intonation in the higher registers[citation needed]. Some luthiers and repairmen[who?] attribute this to a gradual trend of misplacing the bridge on these guitars: the same jigs for bridge placement were used throughout the history of each model’s production. As the amount of production increased from the Martin factory, the jigs eroded, resulting in inaccurate bridge placement[citation needed]. This was eventually identified and corrected.
Electric guitar design and construction vary greatly in the shape of the body and the configuration of the neck, bridge, and pickups. Guitars may have a fixed bridge or a spring-loaded hinged bridge, which lets players "bend" the pitch of notes or chords up or down, or perform vibrato effects. The sound of an electric guitar can be modified by new playing techniques such as string bending, tapping, and hammering-on, using audio feedback, or slide guitar playing. There are several types of electric guitar, including: the solid-body guitar; various types of hollow-body guitars; the six-string guitar (the most common type), which is usually tuned E, A, D, G, B, E, from lowest to highest strings; the seven-string guitar, which typically adds a low B string below the low E; and the twelve-string guitar, which has six pairs of strings.
I am leaning toward Justin and keep watching Marty I jumped way ahead into intervals and in the middle of the presentation it clicked. He knows his stuff. As a newcomer I want to see a bit of the whole picture as I learn basics. PS senior .Found this review very good of top sites and subscribers. AndyGuitar claims on Amazon to be the number one you tube guitar teacher. Not college educated like Justin, J Kehew or Marty Swartz . I will check these others out. Thanks for the review. I would have missed some. So many flooding You Tube
Boss is an effects legend, but thanks to the digital expertise of parent company Roland, the brand now also has an amp that promises organic, valve-like tones at an impressively low price. It does this by using the same Tube Logic technology employed in last year’s 150-watt Waza Craft head, and other Roland amps. The K100 doesn’t invite direct comparison with specific amp brands and models. Instead, there are five generic voices: Acoustic, Clean, Crunch, Lead and Brown. You can pre-load 15 different effects types into the amp, with 55 to currently choose from when you link the Katana to the Boss Tone Studio application. The Katana may look plain, but its tones are truly exceptional. The Crunch voice is responsive and dynamic, while the Brown solo sound is as good as many USA valve-powered competitors. Start using the Tone Studio editor and the Katana’s edge becomes sharper still, with different effects chain presets and assignable control parameters.
Matt Heafy, of Trivium is working on a signature 6 string and 7 string Les Paul with Epiphone. Heafy has said that ‘(I) chose Epiphone, because I have to work my way up, from an Epiphone, Gibson USA, then a Gibson Custom. The thing is if it was a Gibson Custom, the kids would be paying $6000 for it, and they can’t afford that. I want it to be affordable but something I will use on stage”[citation needed]
To produce Music and create the melody man has invented some musical instruments. In this process he has created the Guitar. Guitar is the instrument in which by the vibrations of the strings we can amplify the music. It’s an instrument having “a long, fretted neck, flat wooden soundboard, ribs, and a flat back, most often with incurved sides”. The melody produced by Guitar is also depends on the better finishing of its parts and strong pickups. That’s why it’s a vital task to select the best quality of guitar.
The Ibanez TSA15H gets most of its high ratings from users who love the sound of a cranked tube amp, because this is where it excels. This is especially true of guitarists who use single coil guitars, but there are some humbucker users who are just as impressed. Even experts commend the amp's dynamic response, Premiere Guitar's Kenny Rardin comments: "It feels and responds like a good tube amp, and varying the controls dials in the response even further". Value for money and reliability are also commended, as expected from Ibanez.
This full-sized, 22-fret, single cutaway electric guitar features two single-coil pickups and is capable of producing a wide range of tones. With the bridge pickup, you can get that bright, rich, cutting tone known as the country "twang" made famous by artists such as Merle Haggard and Waylon Jennings. With the neck pickup you get a warmer, mellow, bluesy tone, such as that of Albert Collins or Muddy Waters. Additionally, rock musicians as diverse as Syd Barrett, Chrissy Hynde, and Keith Richards have found a way to make their own distinctive sound using this style of guitar.
Oh and you play really great sounding exercises in blues, rock and country that encourage you to noodle around and find your own riffs and leads to play over the tracks which is something that I had never really been inspired to do before with any other book. The author doesn't just throw a bunch of tired, boring, public domain yankee doodles and scarborough fairs because he is too cheap to pay royalties or some crappy tunes that a kindergardener could write but actual original pro sounding tunes and riffs. Yes, I HAVE been around my fair share of crappy guitar lesson books, thanks for asking!

{ "thumbImageID": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "defaultDisplayName": "Ernie Ball Music Man StingRay 5 HH 5-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pace Car Blue Maple Neck", "sku": "sku:site51312645331323", "price": "1,699.00", "regularPrice": "1,999.00", "msrpPrice": "1,999.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck-1312645331323.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay-5-HH-5-String-Electric-Bass-Guitar-Pace-Car-Blue-Maple-Neck/515512000004004-00-60x60.jpg", "imgAlt": "" } , { "name": "India Ivory Maple Fretboard", "sku": "sku:site51312645326641", "price": "1,749.00", "regularPrice": "2,049.00", "msrpPrice": "2,049.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard-1312645326641.gc", "skuImageId": "StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard/515512000007000", "brandName": "Ernie Ball Music Man", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/StingRay-5-HH-5-String-Electric-Bass-Guitar-India-Ivory-Maple-Fretboard/515512000007000-00-60x60.jpg", "imgAlt": "" } ] }


Solid Body: This build is rather self-explanatory, meaning there is no sound box (as typically seen in other instruments, especially acoustic guitars) but instead relies on an entire electric pickup system to gather the vibrations of the strings to portray your sound. This typically dominates the preferred ‘guitar type’ category unless you’re aware of what the differences are in terms of sound (telecasters, Ibanez, etc.). The perks of this solid build include the ability to be amplified at very high volumes without feedback worries, giving us more combinations when it comes to shapes\designs, and are very responsive to the use of effects since it’s nearly entirely dependent on amplification. Preferred genres? Rock, punk, metal, classic rock, etc.
As a musician for 50 years and a custom builder for 30 years I definitely believe that wood choice has an effect on the tone and sound characteristics of an electric guitar. In my younger years as a cabinet maker, I was helping install a large church pipe organ (Cassavan I believe). The installer from Montreal and I had some discussions about wood and specifically wood properties best for certain applications. He told me that they used poplar for the spacers between the organ pipes because as a good tone wood, sound did not bleed from one pipe to another which is very important with pipe organs. They are the oldest and I believe the largest pipe organ manufacturer in the world and have done a lot of trial and error in this area according to the installer as to what wood works best. I happen to agree with them and agree that poplar is an excellent tone wood and works very well in guitars. Jackson guitars use poplar in there guitar bodies and is a great sounding tone wood. I use it a lot in my custom guitar because of the nice tone it produces.
Martin makes classic guitars that have been featured in countless hit tunes. While they are best known for their top-of-the-line $2,000+ models, Martin also makes great guitars for any budget. Martin guitars always honor their tradition while continuing to strive for a better instrument. Give Martin’s new 17 Series a try if you want to see that theory in action.
Description: Body: Alder - Body Construction: Solid - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Goldburst, Redburst
Martin ukuleles produced in greatest numbers in the smallest soprano size, but concert and tenor sizes were available circa 1922. Concert and tenor models were available in all the following styles, with the exception of Style 0, which was produced only as a soprano. Custom order ukuleles, while rare, were available upon request, and may have combined features from various styles.
Smaller-scale instruments are produced to assist children in learning the instrument as the smaller scale leads to the frets being closer together, making it easier for smaller hands. The scale-size for the smaller guitars is usually in the range 484–578 mm (19.1–22.8 in), with an instrument length of 785–915 mm (30.9–36.0 in). Full-size instruments are sometimes referred to as 4/4, while the smaller sizes are 3/4, 1/2 or 1/4.
The phaser is an interesting pedal that has a surprising mix of uses across genres. What a phaser does is add an out of phase version of your signal with your original signal. This gives your sound a swirling effect that has many sonic possibilities. Eddie Van Halen famously used a phaser set a a low rate to add some “movement” to his solos. In funk, phasers are fundamental in creating the bright and terse rhythm sounds.
Another Quality Ibanez Guitar ....This example is MODEL VINTAGE # V302 BS...And it IS A REAL GEM and it has a Premium German Sitka SOLID Spruce Top, WoW! what a nice original finish this one has...AAA Mahogany Sides-Neck & Back "see quality og the grain in the pics" . Lots of Full-and Wonderful rich tone from this baby. Its real ez to play & stays in tune well. It is a crafted in Japan guitar and it compairs favorably to Gibson, Guild or Martin! Please Note: If you prefer the guitar in Natural and not sunburst see our other listing for another V302 non sunburst we have in stock & available.. thank you for your interest, Joe .

Also like Taylor, high-end Martin guitars can cost thousands of dollars and are out of the reach of many players. But the DRS2 Acoustic-Electric is an affordable guitar that will keep you under budget, and allow you to own a real Martin. It features a dreadnought body style for strong projection, and is constructed using a solid Sitka Spruce top, solid Sapele back and sides and a Stratabond neck. Stratabond is a strong laminate Martin has been using on some of their guitars in order to preserve some of those aforementioned tonewoods, and keep costs down. Richlite is another eco-friendly material, and here Martin uses it for the fingerboard and bridge.


Compared to the guitar amp rankings, the bass amp list is largely dominated by heads rather than combos. Notably, many of the entries on this year's rankings come from the recent wave of ultra-portable, Class D bass amp—a topic we've covered before. Clearly, this subcategory of bass amp is dominating the market, and it's likely that there will be at least a few new entries under that heading at NAMM next month.
well it does not effect the strings electronically. however. each pickup depending on its position on the guitar is designed to pick up a specific range of tones. the pickup closes to the neck is meant to pick up the bass range whereas the one closest to the bridge is meant to pick up the treble(higher) end of the tonal spectrum. all that aside when you actually move the switch it might have a reverberation throughout your guitar because the switch is just really hard or stiff. it might need to be broken in no worries there.

So, if you’d like to emulate some of the guitar greats like Jimmy Page (Led Zeppelin) or Slash, this Epiphone package again with all the extras you’ll need—but with an Epiphone guitar—is a great way to start. Also, it’s worth mentioning that Gibson/Epiphone Les Paul designs usually have a slightly rounded, more narrow fret board and, in my opinion, are a little easier to play compared to the flatter, wider Fender fret boards. But I strongly recommend you don’t take my word for that. Get into a music shop and try the two types of guitar for yourself.

From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.


Making their second appearance on our list, Mesa Boogie delivers with the Dual Rectifier Rackmount (appropriately nicknamed the “Racktifier”). This 3-U behemoth is simply a Dual Rectifier Head, and is one of the very few rackmounts to contain a pre-amp and power-amp all-in-one.  The Racktifier is made for those who simply want the dual rectifier sound, but have the “rack-gear bug”.
I’m not sure if you’re right about Joe being wrong. My memory of exactly how tone controls are usually wired is kind of failing me, but I think I remember that what you’re saying would be true if the output was taken from the node connected to the capacitor, but it’s not–the output node is the node on the opposite end of the tone pot from the capacitor, unless I’m remembering wrong. I think that filter-characteristics of guitar tone circuits are easier to visualize if you imagine them as reacting to a current source. Meaning “a big resistor in series with a capacitor” reacts the same way that “a big resistor” does. Basically, current above the cutoff frequency is shunted to ground through the tone pot–so if the tone pot is high, very little percentage (compared to if it was just a capacitor) of this current gets shunted, whereas if the tone pot is low, a high percentage gets shunted.
In 1935, the Dobro Corporation and National Stringed Instrument merged to become the National Dobro Corporation. The Dobro operation moved into the larger facilities of National, however, the two organizations never really reintegrated. Both National and Dobro maintained separate production lines, sales organizations and distributors throughout the rest of their L.A. tenure. Before long, as we shall see, National Dobro would relocate to Chicago while keeping its facilities in L.A. for a few more years. Dobro production would continue in L.A. through ’37 or so, with some leftover parts being assembled perhaps as late as ’39, after which the Dobro name went into hiatus until revived by the Dopyeras in ’59, but that, too, is another story in the Big Guitar City!

At the other end of the size extreme sits a shape called the parlour. Parlour acoustics are among the smallest in body size you can buy – not counting the modern ‘baby’ guitars – and are typically favoured by players of more low-key, less brash musical styles like folk and indie. Once again, the guitar’s distinctive shrunken body shape is another invention from the CF Martin guitar house, with the guitar’s neck typically joining the body around the 12th fret.

In the late 1950s, various guitars in the Kay line were assigned new model numbers; according to the 1959 catalog, the Thin Twin became K5910 and the Electronic Bass became K5965.[18] Both instruments remained in Kay's catalog offerings with only minor cosmetic variations until 1966, when Kay revamped its entire guitar line to only feature budget instruments. Kay also manufactured versions of the Thin Twin guitar under the Silvertone (Sears) and Old Kraftsman (Spiegel) brands.
However, if you want a small guitar that will give the quality of sound you might expect from a larger guitar, or if you are considering this style as the first beginner guitar for a child or student, you may want to consider other models that are more typical of a guitar suitable for learning, recording or for growing and developing better skills.
Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches (18.4 cm). Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars' compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.
Introducing the next stage in the evolution of the music game. Rocksmith, the first and only game where you can plug into any real guitar. Featuring gameplay that automatically adjusts to your personal ability and innovative game design that makes playing music visually intuitive, Rocksmith will engage experienced musicians as well as those who have never picked up a guitar in their life. You'll unlock mini games to hone specific skills. You'll be able to choose from a large catalog of songs in different styles including:Every copy of Rocksmith will include a revolutionary 1/4 inch USB cable that turns the guitar's signal from analog to digital, allowing it to be played through video game consoles. By plugging into your console, you'll develop real skills and real styles while playing absolutely real music.
Despite what appears now to a somewhat dated design (all the quasi-organic shapes inspired by Alembic at the time are tough to love with the passage of time), Martin’s 18 Series electrics are actually quite comfortable and yield a versatile number of useful sounds. The neck profile is quite round, not unlike many acoustics, but very easy to play. The frets are small and squarish, which makes them a bit awkward for blues-style bending.

ATTACHING AND DRILLING THE NECK For this you will want to use a clamp to hold the neck firmly in place while you dril the holes. Attach the neck to the body and clamp it lightly so you can set it in the right possition before drilling. Make sure you have some protection between the clamp and the body so you don't leave any indentions in the wood. A soft piece of plastic or a soft rag will work nicely. Use a long ruler to allign the neck to the position of the bridge. Do this on both sides of the neck to see that you get it centered. Tighten down the clamp a bit more until the neck doesn't move. Drill the holes as straight as possible with a smaller bit that you used on the body. If you can't reach all of the spots that you need to drill at because the clamp is in the way, take a couple of the furreles and neck screws and screw them into the neck. Once you have done this you can finish drilling the other holes with out the clamp.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"performance level","prop11":"beginner","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}

Despite what the Peate copy says, these instruments are not Dobros, but rather Supros. The guitars and mandolin shown in the Peate catalog are identified as being “The New Dobro Electric Guitars,” part of National Dobro electric guitars. However, the No. 1 Hawaiian shown is clearly the Supro frying pan (recall that the Hawaiian in ’35 was the fancier Dobro), and the No. 2 Spanish Guitar and No. 3 Mandolin are clearly labeled “Supro.”
As this site was founded by one of the circuit board designers from GuitarPCB.com, you can be assured that all of the homework has been done for you in selecting the appropriate parts for each circuit. Many of the kits we sell are not available from any other US supplier. Currently, we only ship to the USA, however, we plan to expand to the rest of North America in the future.

In ’74, Ibanez, which was by then leading the copy pack, followed the suggestions of Jeff Hasselberger and changed its designs by squaring off the end of the fingerboard and lowering the neck into the body to look and play more like a Gibson original. Virtually all Japanese manufacturers followed. Since Univox guitars were primarily made by Aria, it is probable that in late ’74 or ’75, Univox guitars also had these features, although the Gimme shown in a 1976 flyer still has the rounded fingerboard, and this was in a 1980 binder, so you can’t be too rigid in evaluating Univox guitars based on these details.
Today's use of Torres and post-Torres type guitars for repertoire of all periods is sometimes critically viewed: Torres and post-Torres style modern guitars (with their fan-bracing and design) have a thick and strong tone, very suitable for modern-era repertoire. However, they are considered to emphasize the fundamental too heavily (at the expense of overtone partials) for earlier repertoire (Classical/Romantic: Carulli, Sor, Giuliani, Mertz, ...; Baroque: de Visee, ...; etc.). "Andrés Segovia presented the Spanish guitar as a versatile model for all playing styles"[5] to the extent, that still today, "many guitarists have tunnel-vision of the world of the guitar, coming from the modern Segovia tradition".[6]
A basic tone control consists of a capacitor and a potentiometer (the tone control itself).  The illustration below if the basic wiring for a tone control.  The view is as you would see it from the bottom of the potentiometer, wired for a right-handed guitar.  The oval "blobs" on the potentiometer casing are solder connections.  The ground wire should be soldered to the potentiometer casing for this tone control to work - and it helps shield out unwanted noise (really noticeable if not done this way and you use metal knobs).
If you like to run all your effects into an amp set clean and get your gain sounds from pedals, you probably don’t ever need to consider using amplifier effects loops or a wet/dry/wet rig. If your amp(s) are set relatively clean, you will be able to use any of the effects listed above straight into the front of the amp—and they should sound really good.
Rickenbacker basses became a staple of 1970s hard rock and were featured on countless recordings of the decade (such as the first two albums by Deep Purple). These instruments were also widely used among progressive rockbassists, particularly Chris Squire of Yes and Geddy Lee of Rush, who achieved distinctive signature sounds with their Rickenbacker bass, strung with round-wound Rotosound bass strings. The “Ricks” were not as visible among the punk/new wave explosion of the late 1970s and early 1980s, with the notable exception of Kira Roessler (Black Flag). Many bass players continue to play Rickenbackers. (see “Ric” players section below)
Today I was working on my fave guitar, a James Trussart Steelcaster. Instead of reconnecting my tone pot and capacitor as usual, I ran two wires from the tone pot’s wiper and ground terminals, the spots where the cap normally connects, and soldered them to a little piece of stripboard with sockets for connecting the caps. Then I recorded quick demos for six possible cap values. I started with the two most common values, and then added two lower values and two higher ones.
Jazz guitar playing styles include rhythm guitar-style "comping" (accompanying) with jazz chord voicings (and in some cases, walking basslines) and "blowing" (improvising solos) over jazz chord progressions with jazz-style phrasing and ornaments. The accompanying style for electric guitar in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In rock and pop, the rhythm guitarist typically performs chords in dense and regular fashion to define a tune's rhythm. Simpler music tends to use chord voicings focused on the first, third, and fifth notes of the chord. In contrast, more complex music styles of pop might intermingle periodic chords and delicate voicings into pauses in the melody or solo. Complex guitar chord voicings are often have no root, especially in chords that have more than six notes. Such chords typically emphasize the third and seventh notes of the chord. These chords also often include the 9th, 11th and 13th notes of the chord, which are called extensions, or color notes.
Is there any particular reason you're opposed to Kontakt libraries? All of the plugins you mentioned are sample-based themselves, with the notable weakness that you would not be able to change the mapping, grouping, programming (etc), unlike with Kontakt. As someone who uses a lot of virtual instruments, I'd say it's always preferable to have a sample-based instrument in an open sampler plugin since you can see what's going on under the hood and change things like envelopes as needed.
I just want to say I completely agree with the assesment of getting a non-shit Fender strat vs a Squire to begin with. I was on one of these cheapos and a 15w marshall amp for way too long. I became decent at playing, but in the end I didn’t feel inspired to keep playing. I recently bought a Maton MS503 Classic and a Fender Blues Deville 410 and playing that setup was like my body was on fucking fire. I wish I’d had more of that feeling sooner in my life. Those $200 for a squire goes a couple of years, but a $600 strat or other great guitar can go a lifetime. Amp matters heaps too of course.
Bill Collings dropped out of medical school in the early 1970s[3] and instead worked in a machine shop for five years.[4] At the same time he built his first guitar. In 1975 he moved to Houston, Texas, where he worked as an engineer with a pipeline and oil field equipment company by day and a guitar builder by night. Three years later he met renowned musician Lyle Lovett and built him a guitar.
While Gibson are the creators of the original J2000 jumbo-sized acoustics, the company’s reasonably priced sister company Epiphone do a range of acoustics which are perfect for players looking to dip their toes in the water. The Epiphone EJ2000 is identical in dimensions and appearance to its more costly sibling, yet offers the perfect entry guitar for budding rhythm players.
Get ready to rock! This kid's electric guitar set has everything little rockstars need to jam out in style and foster a growing passion for music. Whether a child is just learning the basics or has mastered every chord, this guitar is the perfect practice tool to lift them to the next level. Hook it up to the included 5-watt amplifier and let your kid experience music like never before!

As already stated, the perfect-fifths (P5) interval is the most harmonious, after the unison and octave intervals. An explanation of human perception of harmony relates the mechanics of a vibrating string to the musical acoustics of sound waves using the harmonic analysis of Fourier series. When a string is struck with a finger or pick (plectrum), it vibrates according to its harmonic series. When an open-note C-string is struck, its harmonic series begins with the terms (C,C,G,C,E,G,B♭,C). The root note is associated with a sequence of intervals, beginning with the unison interval (C,C), the octave interval (C,C), the perfect fifth (C,G), the perfect fourth (G,C), and the major third (C,E). In particular, this sequence of intervals contains the thirds of the C-major chord {(C,E),(E,G)}.[4]
There sure are a lot of electric guitar options to choose from in this day and age. Thankfully, your choice doesn't have to be a difficult one to make thanks to world-leading guitar companies like Epiphone. In fact, Epiphone specializes in a wide range of electric guitar value packages, assembled specifically to help budding enthusiasts begin their musical journey on the right foot. If learning how to play the guitar is something you've always wanted to try but were never sure where to start, consider this section your launching pad.
You can trace all things loud and riff-y right back to the Kinks' Dave Davies, starting with the fantastically simple power chords of "You Really Got Me," which he recorded at age 17 – setting off a run of proto-metal singles from "All Day and All of the Night" to "Till the End of the Day." Davies, who created the distortion on "You Really Got Me" by slicing an amp speaker with a razor, has laughed off claims that it was actually played by an uncredited Jimmy Page: "Who'd want to play a solo that crazy, anyway? Only Dave Davies could do that."
A musician's pedalboard can be a cluttered place, with lots of stompboxes all competing for room, not to mention creating a virtual spaghetti of patch cables. Wouldn't it be nice to swap out some of those pedals in exchange for a single unit? Of course it would, and that's why multi effects pedals exist. With one of these babies at your feet, you'll have multiple pedals in one. That does more than just clean up the visual look of your effects loop - it also makes your pedals easier to manage and use, and if you're a beginner, you'll appreciate how much simpler it is to put together your board with the most common effects all gathered in one unit.
It was founded by Orville Gibson in 1902 as “The Gibson Mandolin-Guitar Mfg. Co., Ltd.” in Kalamazoo, Michigan.    Gibson is known for its innovation and supreme quality. Gibson’s Les Paul is very famous Guitar which creates the wildfire in the hearts of million fans. Gibson is always committed to provide the best quality with minimum disorder in all over the world. To enrich your experience the can prefer this wonderful Guitar.
{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: music software","pageName":"[gc] shop: pro audio: music software","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: music software","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"music software","prop5":"[gc] shop: pro audio: music software","prop6":"[gc] shop: pro audio: music software","prop3":"[gc] shop: pro audio: music software","prop4":"[gc] shop: pro audio: music software","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
i have an original 12string vox mark XII and i would like some parts (original or replicas) to repair it. For example the neck(is the right word?)has a surious damage and i want to replace it, also i miss the tremolo stick and the circle black plastic stuff fit the back side. i need some connections all around the world but it could be better if i ll find something in europe. please help-mail me and sorry for my english syntax. dimitris from athens greece.

Years ago companies used to manufacture rotating speaker cabinets (the most famous being the Leslie Rotary Speaker) – as they rotated the sound would change and develop, creating interesting modulation effects. Nowadays such things are considered too large and inconvenient to transport and use, so we have stomp boxes to help us emulate the sound. The most famous of these is the Dunlop Uni-Vibe, and although it doesn’t sound as close as other pedals to the real thing, it has become a famous sound in its own right. Rotary speaker effects often have controls for the speed of the effect, and can sometimes (such as in the case of the Uni-Vibe) be connected to expression pedals to control the speed on the fly. If you’re into 60’s psychedelic rock like Jimi Hendrix, this one’s a must.


I am writing this due to the mixed reviews that I read before buying this. This is a really powerful device. I have had a POD 2.0 for years. This is just as good and is also small, portable, and inexpensive. Most of the criticism that I read is that it is not well made and durable. It is well made, but I don't think it is designed for gigging. It is perfect for practicing or interfacing with a home studio. If this is your application, then you will be very satisfied. One other thing that I found true of this and similar devices that I own is that the quality of the headphones makes a big difference. If you use studio quality headphones it will sound great, if you use music player headphones it will just sound good. I haven't ... full review
What makes the THR100HD special is its clever digital power amp, which faithfully mimics the operation of real valves. Then there's the fact that you get two of everything: two preamps, both with a built-in booster function that behaves as a stompbox; two effects loops; two power amps; two XLR line outs. What you see is very much what you get, with a five-position amp voice selector, which packs three overdrives - crunch, lead and modern - and two cleans: solid, and er, clean. There's also a channel volume control, because the master volume control works inside Yamaha's Virtual Circuit Modelling environment, adding more drive to the THR's digital power amp simulation, which in turn has five different valve choices, as well as Class A or Class A/B operation. Lurking on the rear panel are two speaker-simulated balanced XLR line-outs, with a ground lift switch that uses the latest Impulse Response cabinet simulation. There are superb Fender-influenced cleans, bluesy touch-sensitive crunches and a choice of classic or modern lead tones, all footswitchable for your convenience. The tones are so convincing it's really hard to believe there are no valves. The interaction of the clever digital power stage with the loudspeaker is just like that of a good valve amp, and the virtual valve choices are uncannily authentic.
If it’s not self-evident why 2018 Britain needs Liverpool’s Queen Zee and The Sasstones, the comment “shouldn’t be aloud” - left under their BBC Introducing YouTube vid - unintentionally says plenty. The Liverpool punk rockers offer a cauterising, incendiary reaction to a rotten state of affairs. Taylor Brown is the songwriting, guitar-wailing savvy - crafting debauched, distorted rock ’n’ roll solos betwixt the raw expression of band leader Queen Zee’s powerful, Manson-like vocals. Aloud and proud. 
Open Loop Gain: Feedback Solid-state amplifiers are inherently nonlinear. They have a very large ‘open loop gain’ approx 20,000. The amplifier output is (feedback) to the comparator input to reduce the gain to approx 50. Therefore 99.9% of this feedback corrects all instability and non-non-linearity of the amplifier, as explained in amplifiers. The speaker also acts as a large microphone. All non-linear movements and vibrations within the speaker cone, (caused by reflected nodes, chaotic resonances etc) of which there are many, are regenerated back into electricity by the voice coil. This re-generated signal from the voice coil is inadvertanetly fed-back to the solid-state amps comparator input, and re-amplified back to the speaker as recycled distortion.
The chord below (an Am) is going to be used for demonstration. Firstly, you'll notice the name of the chord labeled up the top. Next you'll see a "grid" below it. This grid represents your guitar fretboard. The 6 lines running downwards represent the six strings on your guitar with the fattest and lowest sounding string on the left hand side. The horizontal lines represent the frets on your guitar neck. The top line is the top of the neck.
I didn’t use any guitar effects. I just used a straight into the amp, and I put the amp up pretty hot, though. The tweeds go up to 12 usually, and this one I had on 10 on the bridge pickup on the Strat. I was using a glass slide. Here’s the slide I was using. It’s like an old medicine bottle. I put some felt in there to make it a little bit of a tighter grip on my finger, but it’s the same slide that Dwayne Allman used.

The SD is a classic. This had a more exaggerated Jazzmaster shape than the T-60. It had a dramatically swept back lower horn, and an offset pair of waists, looking as though it’s been slightly melted. These had bolt-on necks with the elongated Strat-style head, with round logo stickers. A rectangular plastic control panel was mounted above the strings, with large thumbwheel controls and on/off rocker switches, while a large-ish pickguard was mounted under the strings. The controls on the SD-4L were especially interesting, taking their cue from the Italians, no doubt. The thumbwheels were for volume and tone, while there were a total of six rocker switches. Four of these were on/off for each of the four pickups, but in between were two more. Their function is unknown, but a good guess would be phase reversal between the front and back pairs of pickups. Both models had the rectangular fingerboard edge inlays. With “L” designations, both had vibratos. These consisted of a fairly simple bar for string attachment with a series of springs behind it, all covered with a hinged metal cover. The handle was extremely long. Pickups were the beefy tall rectangular type with metal cases and black plastic center tops with exposed pole pieces (these could be screws or squares). The SD-4L had four pickups, in two pairs, while the SD-2L had two. If I couldn’t have a Spectrum 5, I’d be looking for one of these (I am!).

Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Bubinga - Neck Construction: 3 Piece - Nut Width: 48mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 7 In-Line - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG 707 - String Instrument Finish: Black


Dive bomb is a guitar technique in which the tremolo bar is used to rapidly lower the pitch of a note, creating a sound considered to be similar to a bomb dropping. One of the most recognized pioneers of this technique is Jimi Hendrix. Other notable musicians who are widely known for using this technique are Eddie Van Halen and Joe Satriani. - winner333
Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.
Bonnie Raitt: features an alder body, a narrow C-shape maple neck with a late 1960s large headstock, rosewood fretboard, 9.5″ radius and 22 medium jumbo frets. Other refinements included a 3-ply white shell pickguard, three Texas Special single-coils with 5-way switching and American Vintage hardware. Available in 3-color sunburst and desert sunset. Discontinued in 2000.

The tone selector on an electric guitar controls the capacitor, which basically filters out high frequencies. The same way a high-cut filter (or low-pass-filter if you prefer) works on a standard equalizer. By dialing down the tone, you remove brightness and treble. The pickup selector does just what it's called.. Selecting which pickups being used to capture the vibration of the strings, and translates the energy into electric current, though the configuration and number of "presets" can vary from guitar to guitar, depending on how many pickups it has etc. If you're a handyman you can even configure this yourself.
Make sure that only the notes you deliberately play actually sound. Guitar strings aren't isolated systems like the tone generators of a synthesizer; if you simply leave them open they may ring even though you've never actually played them. Always watch out carefully for such “rogue sympathetic vibrations” and make sure you properly stop strings that sound in unintended ways.

Boost/volume pedal: A boost or "clean boost" pedal amplifies the volume of an instrument by increasing the amplitude of its audio signal. These units are generally used for "boosting" volume during solos and preventing signal loss in long "effects chains". A guitarist switching from rhythm guitar to lead guitar for a guitar solo may use a boost to increase the volume of his or her solo.[59]
Many guitarists with instruments that have more than one pickup spend most of their time on the bridge unit. Using a variety of pickup positions when recording will thin or fatten the sound as required, but also help free up space when it comes to the mixing stage. Think of a recorded mix as a layer cake; too much density in one frequency range will cause a headache for the mixing engineer.
“It was just a different world,” Ford says. “There was ‘Don Kirshner’s Rock Concert,’ Ed Sullivan, Dick Clark, and they would have one band on and you would wait all week to see who that band was going to be. And you could talk about it all week long with your friends — ‘Saturday night, Deep Purple’s going to be on, what are they going to play?’ — and then everybody’s around the TV like you’re watching a football game.”
Stay tuned for the second part of our series/parallel discussion next month. We’ll pick up the soldering iron and explore some sweet parallel/ series switching options for our Strats. This will also close out our run of Stratocaster mod columns. When we finish the series/parallel discussion, we’ll switch over to Telecaster and Esquire mods. Until next time, keep on modding!
The output transformer sits between the power valves and the speaker, serving to match impedance. When a transformer's ferromagnetic core becomes electromagnetically saturated a loss of inductance takes place, since the back E.M.F. is reliant on a change in flux in the core. As the core reaches saturation,the flux levels off and cannot increase any further. With no change in flux there is no back E.M.F. and hence no reflected impedance. The transformer and valve combination then generate large 3rd order harmonics. So long as the core does not go into saturation, the valves will clip naturally as they drop the available voltage across them. In single ended systems the output harmonics will be largely even ordered due to the valve's relatively non linear characteristics at large signal swings. This is only true however if the magnetic core does NOT saturate.[45]
Whether you call us Guitar Center Forth Worth or GC Cowtown, it's all the same to us! One way or the other, we'll be sure to send a smile and a big Texas "Howdy!" your way when you walk in the front door. Conveniently located on South Hulen Street, we're just a stone's throw from Hulen Mall, near the Chisholm Trail and I-20 interchange. Turn in when you see Chili's, and get ready to experience the down-home vibe that's been growing our community of regular customers since our grand opening back in 2004.First and foremost at Guitar Center Fort Worth, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales to repairs, our staff in each department is well-trained to cater to Dallas/Fort Worth area music-lovers. Our store is open every day of the week, so there's always a right time to visit even if you're on a busy schedule.
At some point, possibly in 1967 – please forgive the fuzzy chronology, – Unicord was purchased by Gulf + Western, the big oil/hospitality conglomerate. This was part the corporate acquisition mania rage of the mid-’60s which included deals for Fender (CBS), Gretsch (Baldwin), Valco (Seeburg), Kay (Valco) and Gibson (Norlin). Either just before or just after the Gulf + Western purchase of Unicord, Unicord was merged with Merson. It was probably then Merson moved from New York City to Westbury.
• Stop: A stop tailpiece is a bar, typically made of an alloy, which is held to the body of a guitar by large screws threaded into embedded sleeves. They are most often aluminum, zinc or brass based, with the latter the most costly. Aluminum has a few advantages. When the stop tailpiece was perfected by Gibson over a half-century ago, the originals were made of aluminum. Many players prefer those today for the vintage vibe, but aluminum is also the lightest weight tailpiece alloy, which some believe allows the strings and the guitar’s body to connect — which is another function of the tailpiece — in a more resonant fashion. It’s best to be careful while changing strings with a stop tailpiece, because they sometimes fall out of their sleeves and can scratch the finish.
For our purposes, I’ll break pedals down into four overarching categories: 1) Boost, Compression, Distortion, and Fuzz; 2) Modulation; 3) Echo and Delay; and 4) Filtering and EQ-Based effects, and this series will focus on individual types that come within each of those larger categories (for example, Modulation includes many quite different effects, such as chorus, vibrato, phasing, and so on). This is not to say that some manufacturers or other writers couldn’t categorize things differently, and certainly a few examples below could be safely lifted out of the heading I have stuck them in and accurately described by another category. It doesn’t matter all that much. These headings are mainly a means of breaking down the sonic results of the enormously varied range of pedals that exists out there, and taking a brief look at what makes them tick.
Several concert sound subwoofer manufacturers suggest that their subs can be used for bass instrument amplification. Meyer Sound suggests that its 650-R2 Concert Series Subwoofer, a 14-square-foot (1.3 m2) enclosure with two 18-inch drivers, can be used for bass instrument amplification.[23] While performers who use concert sound subwoofers for onstage monitoring may like the powerful sub-bass sound that they get onstage, sound engineers may find the use of large subwoofers (e.g., two 18" drivers) for onstage instrument monitoring to be problematic, because it may interfere with the "Front of House" sub-bass sound.

Are you running it through a cab simulator? That or proper eqing. Turn up the mids and drop a high pass filter on that sucker. If you're finding it still lacking check out the KeFir cab simulator and then just use the preamp you have now. I've had wonderful results with that. If you're not liking your preamp try out The Anvil by Ignite amps. Best clean tone I've had out of freeware.
As an active musician in Los Angeles, I often hear guitarists marvel at how good the latest Squier by Fender guitars are for the price. The Squier by Fender HSS Bullet Strat is no exception. A few minor complaints aside, it’s simply a well-made version of a decades-proven design at a very affordable price. All of our panelists felt that it played well, sounded good, and in general felt like a more expensive guitar.
Do you have an old guitar that requires knowing how to repair a damaged guitar body? Read on and learn some neat tricks for repairing body damage on a guitar. Body damage on a guitar ruins the acoustics. Body damage on a guitar body really make it useless in the playing arena. If you are looking to bust out that old guitar but need some handy advice on how to repair some old damage, MadeMan has the fixes for you. This article will give you the fixes for larger damage and the annoying little nicks and teach you the way to repair them.
Melodious tuning powerful pickups and with supreme body ESP is also famous for its affordable prices. This brand is famous for its quality and best for the lovers of Electronic Guitar lovers. The Japanese company was founded in Tokyo Japan in 1975.it manufactures some best  brands like  “ESP Standard”, “ESP Custom Shop”, “LTD Guitars and Basses”, “Navigator”, “Edwards Guitar and Basses” and “Grassroots”.
When technology changed from valve to solid-state, it was noticed that solid-state amplifiers lacked warmth and bass performance, and had to be twice as powerful as valve amplifiers, to sound as loud. Current Drive: Solid-state amplifiers behave in ‘Voltage Drive’. This acts as a short circuit (zero output impedance, or 100% damping factor) across the speakers, causing excessive damping, which reduces efficiency, limiting responsiveness. Valve amplifiers behave in ‘Current Drive’. This represents an open circuit across the speaker without over damping, allowing maximum response and efficiency.

Loop-based guitar plugins are slowly moving to the point of obscurity as virtual instrument technology is getting to the point where even string instruments can sound out-of-this-world good and blossom with character. But there still exists some gems out there such as Acoustic Revolutions, which updated to volume two as recently as 2015, doubling the number of loops.
OM-42PS: Paul Simon’s signature acoustic model (manufactured in the 1997 model year) is based on the OM-42, which had not been manufactured since 1930. Alterations were specifically requested by Simon himself. From the original planned run of approximately 500, only 223 were produced, making these a collector’s item. A standard version of the OM-42 is in the current range.
The two ’71 piggyback bass amps included the 1060 Bass Amplifier System ($530), featuring seven tubes, 105 watts, two channels, four inputs, volume, bass, middle and treble controls on each channel, presence, variable impedance, and a cabinet with one Univox 15″ speaker with 22-ounce dual diameter Alnico magnet and 2″ voice coil, plus a fully loaded reflex cabinet with true folded horn principle (you ampheads may know what the heck that means!). The grille had two large square cutouts with rounded corners. The 1245 Bass Amplifier System ($385) offered five tubes, 60 watts, two channels with the same controls as the 1060, and two 12″ Univox speakers with 20-ounce Alnico magnets and 2″ voice coil.
Here’s an interesting (they’re all interesting to me!!!) guitar that shows the evolution of Matsumoku made guitars.  Even the earliest solid body electrics that came out of the Matsumoku plant were made of solid wood and displayed really good wood craftsmanship!  Lots of start up companies went to Matsumoku in the early days because the plant had proper wood drying facilities (if the wood wasn’t dried properly, the guitars often became seriously messed up during the import trip across the ocean).
Two new 325s were created for Lennon and were shipped to him while The Beatles were in Miami Beach, Florida, on the same 1964 visit to the US: a one-off custom 12-string 325 model and an updated six-string model with modified electronics and vibrato. He used this newer 6-string model on The Beatles’ sequentially “second” appearance on The Ed Sullivan Show.[7]

Merson emerges again as an importer in the late ’50s and early ’60s (as the guitar boom was building), marketing Giannini acoustic guitars made in Brazil and Hagstrom electric guitars made in Sweden. Recall that in the ’50s, the accordion craze had given great impetus to the success of music merchandisers. But by the end of the decade, the collapse of the fad left them holding the squeeze-box, as it were. After some meandering, the Folk Revival picked up at the end of the decade, creating a growing market for acoustic guitars. Hence the Gianninis.


I’ve been keeping track of completed Ebay sales since I started looking at Kents, and have come up with a few average sale prices. The way I figure an average is by first tossing out the highest and lowest sales. If I am left with fewer than three sales I don’t bother. That’s too small a sampling to be worthwhile, otherwise I take the average of the rest. The table below will only be updated when there is a sale that results in a change, so if the table looks like it might be dated, it’s probably because there haven’t been any sales that affected the numbers. Availability of Kent guitars on Ebay seems to ebb and flow.
Basic guitar chords are built using the first, third, and fifth tones of the scale that corresponds with the chord you want to play. For instance, if you want to play a G major chord, you go to the G major scale and find the first, third, and fifth notes in the scale. The G major scale has one sharp (F), so the notes in the scale are G-A-B-C-D-E-F#. The first note is G, the third note is a B, and the fifth note is D. These are the notes you need to make a G major chord. If you wanted a G minor chord all you need to do is make the third note a flat. This system applies to any chord you want to build. These three note chords are called triads and make up the bulk of the beginner open positions chords you’ll use to play a lot of guitar chords songs. When you study these chord shapes, you’ll notice that the root of the note (the first note) usually appears on the lower string and is doubled on a higher string, which reinforces the key tonality.
Went here for the first time yesterday to get the strings replaced on my acoustic guitar. Kevin, the owner, completely encompasses the definition of true customer service. He not only was professional, courteous and friendly but also willing to talk me through the process as he was re-stringing my guitar when I asked if I could watch and learn. I highly encourage coming here, especially for a an excellent and personal experience! I will be back no doubt!
So half of it is finding a happy place in terms of neck size. The other half is the setup. String height is usually adjustable, with electric guitars, which is a good thing in your case. Lower string height means you don't need to push down on the string as hard to play the notes. When you find a guitar that feels good to you but the strings are kinda hard to push down, talk to the store about having it setup and intonated with a very low string height... some people use the term "fast" action. 

Three full steps from standard tuning. Used by Dream Theater, Adema, Asking Alexandria on From Death to Destiny and The Black, Boris, Cannibal Corpse, Morbid Angel (on several songs starting with their album Covenant), Father Befouled, Sepultura, Jeff Hanneman of Slayer (on "War Zone" and "Here Comes the Pain" from God Hates Us All and "Not Of This God" from World Painted Blood. Kerry King used a 7-string for those songs), Mutoid Man (Stephen Brodsky started using the tuning during the recording of the Helium Head EP to fill in the low end of the sound, in an attempt to make up for their lack of a bassist at the time), American Head Charge, Nickelback (on "This Means War" and "Gotta Get Me Some" from " Here and Now" and Nevermore (when band switched to 7 strings).
Another popular modification is to reverse the electric polarity of one of the pickups (or one coil of a dual-coil pickup). When two pickups are selected, this produces a very thin and weak sound, due to phase cancellation between the pickups.[21] The closer the pickups are to each other, the greater the cancellation and thus the weaker and thinner the resulting sound. In case of a humbucker this results in a sound that is so weak as to be almost unusable, as well as the loss of the pickup's hum-cancelling properties (due to the coils being magnetically out-of-phase, but electrically in-phase with each other).[22]
Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
For solidbodies there is usually a one- or two-letter prefix indicating the body style or general model. This is followed by a dash and a number which usually indicates the number of pickups (e.g., J-1), although on occasion the number indicates the year of introduction (e.g., TG-54). Guitars bearing a vibrato usually appended an “L” after the pickup number (e.g., MJ-2L).
First, you have 11 different modes, including the TonePrint option, just like the Flashback delay. Then you have a true bypass circuit with an analog dry-through signal, which perfectly preserves the natural tone and EQ of your acoustic guitar (again, similar to the Flashback's setup). When you're using the effect, we would advise tinkering with the mix to get about 35-50 percent of your dry signal coming through.
Bruce Springsteen has always had a not-so-secret weapon: "I got signed in the pack of new Dylans," he told Rolling Stone, "but I could turn around, kick-start my Telecaster and burn the house down." Springsteen didn't make any technical breakthroughs on guitar, but few players are better at coaxing emotion from steel and wood: witness the surf-rock recklessness of the "Born to Run" solo, the junkyard-dog bite of "Adam Raised a Cain" and the melancholy twang of "Tougher Than the Rest."
A guitar tuner pedal is an absolute must have if you’re serious about guitar as it provides accurate tuning instantly and can even allow you to tune your guitar to alternative tunings such as Drop D, open tunings and more. Check out our top 12 Best Guitar Tuners blog for more info on guitar tuners. The absolute industry standard is the BOSS TU-3 tuner pedal - a must have.

Your skill level on the guitar is another factor that should be taken into consideration while shopping for the perfect instrument. It is generally wise to start out with a lower quality model when you are first beginning to study the guitar, whereas a veteran player with a trained ear will likely require the bells and whistles of more high end gear. If you’re a beginner, it’s a great idea to start out with a Yamaha or a Fender Squier, for example, as you get plenty of quality to learn on without breaking the bank. It’s wise not to go overly basic, however, as cheap guitars will have harsh playability that will leave a beginner with painful calluses that may scare them away from the instrument.


Launch price: $799 / £826 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Pau ferro (rosewood reviewed) | Frets: 21 | Pickups: American Vintage '58 Single-Coil Tele, American Vintage '52 Single-Coil Tele | Controls: Volume (with S-1 Switch), tone | Hardware: 3-saddle American Vintage strings-through-body bridge | Left-handed: No | Finish: Faded Sonic Blue, 3-Color Sunburst
However, when I’m building a guitar, there’s a myriad of small adjustments I can make to steer the instrument on a desired trajectory. These micro mods are interactive with each other and, depending upon the combination, offer a wide variety of sonic outcomes. But these little mods can also be applied to existing guitars—your guitars—in any number of permutations and to great affect. Let’s take a look at five mods that are easy enough for most players to try.
{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: supro","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"supro","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
Deco Tape Saturation & Doubletracker is a unique effects pedal that allows for a wide variety of tonal possibilities.  You can place Deco near the beginning of your signal chain and use the Tape Saturation as a light overdrive.  Or, you can place Deco at the end of your chain, use lower Tape Saturation settings, and provide your entire signal with the tape-like warmth, compression, and added low end harmonics.
Everyone has an opinion on Crate amplifiers. Some guitarists are strong supporters, if for no other reason than a fond recollection of a Crate as one of their first amps. Others aren’t as impressed. While it’s true that many Crate models are geared toward beginners and intermediate guitarists, they also have plenty of pro-quality gear in their lineup.

Music is a passion for many people around the world. There are possible over 3000 musical instruments in the world, right from the most traditional ones to the highly sophisticated modern ones. Guitar is one of the most stylish modern musical instruments known to man. A lot of young stars are actually inclined towards playing a guitar. The guitar is an instruments which produces sound on the strumming of strings attached to the strand, which is like a long bar on the upper portion of the guitar. There are a number of manufacturers who manufactures these amazing instruments. But question is which the best are? Here is a list of top ten brands of guitar to choose from:

The Zoom G3X features a built-in wah-wah expression pedal that controls the sound parameters in real time. It has over 100 effects and 22-amp models that bring out the amazing sounds of your guitar. This distortion pedal also features a stompbox with over 100 stage-ready effects. For computer recording, this pedal has a USB audio interface for Mac and PC. In addition, it has a balanced line-level output, an onboard chromatic tuner, and an integrated drum machine. Its 40-second looper gives it overdubbing capabilities.
As obvious as it sounds, a tuner (or tuning pedal) is fundamental for your rig. It can also act as a mute switch for changing guitars between songs. These days there are many smartphone apps for tuning your guitar – as well as clip-on tuners – but when you need precision and a clear visual indication of the pitch of your strings, nothing beats a good old tuning pedal. The Boss TU-3 is a classic tuning pedal with lots of useful settings – alternatively, you can check out the CPT-20 by Harley Benton which features true bypass connections and a super large LCD display. Need a smaller footprint? Try the Mooer Baby Tuner!

His first solo album, Texas Flood, was released in 1983 and featured blistering renditions of “Testify” and “Texas Flood” as well as now-classic originals like “Pride and Joy” and “Lenny.” Several other successful solo albums followed. On August 27, 190, Vaughan perished in a helicopter crash while returning form a gig he shared with Eric Clapton, Buddy Guy, Jimmie Vaughan and Robert Cray.


Looper pedal: A looper pedal or "phrase looper" allows a performer to record and later replay a phrase, riff or passage from a song. Loops can be created on the spot during a performance (live looping) or they can be pre-recorded. By using a looper pedal, a singer-guitarist in a one person band can play the backing chords (or riffs) to a song, loop them with the pedal, and then sing and do a guitar solo over the chords. Some units allow a performer to layer multiple loops, enabling the performer to create the effect of a full band.[87] The first loop effects were created with reel-to-reel tape using a tape loop. High-end boutique tape loop effects are still used by some studio producers who want a vintage sound. Digital loop effects recreate this effect using an electronic memory.[88]
What makes this one of the best electric guitar amp for beginners is Peavey’s TransTube preamp technology which provides a realistic tube amp tone and response, with the price and stability of a solid state amp – the best of both amp styles. Loud enough to rock, yet the headphone jack allows you to rock in isolation without disturbing others. The line in lets you plug in a CD player or mp3 player to jam with your favorite bands. It currently retails for $79.99.
Frets are positioned proportionally to scale length—the shorter the scale length, the closer the fret spacing. Opinions vary regarding the effect of scale length on tone and feel. Popular opinion holds that longer scale length contributes to greater amplitude. Reports of playing feel are greatly complicated by the many factors involved in this perception. String gauge and design, neck construction and relief, guitar setup, playing style and other factors contribute to the subjective impression of playability or feel.
×