Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]

A great player knows a guitar is more than a few pieces of wood and metal.  Every Whalehazard guitar is handcrafted with incredible attention to detail and meets exacting standards of quality.  Each instrument is built in South Minneapolis by Andy Webber.  As a one-man operation, great care will be taken to make sure your custom guitar will take your playing and sound to a new level.  All materials and components are carefully selected for quality and longevity.  Designs are painstakingly contemplated and are constantly evolving.  From custom inlays to a hand-shaped bone nut, every detail of your instrument is studied and considered to make sure your Whalehazard guitar is a unique piece of craftsmanship that will stand the test of time.


Hertz Guitar company was originated from Shanghai/China & North Korea. This brand of guitars produces electric and other wide range of guitars that can be used in studio recordings and live shows. This brand also manufactures guitar accessories. The starting price of guitar from this brand is 12,504 INR approximately. Anyone looking for an affordable electric guitar at a beginner and advanced level can buy this brand of guitar.
The Fender Mustang I V2 Guitar Amplifier Combo also features USB connectivity allowing you to hook it up to your computer or DAW software for easy recording. If you don’t already have a DAW, you can utilise the free downloads of Fender FUSE and Ableton Live software suites to create your own music and take advantage of all the great features within the amplifier when recording. An intuitive, easy to use control panel allows you to see and change your sounds and footswitch connectivity (sold separately) ensures you can have complete control without the need for a pedalboard. A fantastic amplifier for beginners and players of all levels.
As mentioned above, the Martin DSR2 comes with an all-solid wood body, with traditional solid spruce as its top. In conjunction with the solid sapele back and sides, this configuration produces premium level Martin dreadnought tones, albeit with stripped down aesthetics. The neck is as familiar as it gets, with its 1.75" nut width and 25.4" scale length.

The Les Paul Special VE has a Poplar body with a sleek look thanks to the Vintage Worn finish and no binding on the neck or body. The Les Paul VE is cut to the same classic profile of all Les Pauls and has a comfortable and fast Mahogany bolt-on neck with a 1960's SlimTaper D profile. The Rosewood fingerboard has traditional Pearloid "Dot" inlays, a 24.75” scale, a 14” radius, 22 medium jumbo frets, and a standard 1-11/16” nut. Just below the headstock is the famed “bell” shaped truss rod cover found on every Les Paul since the early '50s with “Vintage Edition” in white. 


We don’t have many cutaway styles or Jose Ramirez guitars in our review list, but this is one of them, and it just happens to be a “hybrid,” or a classical guitar with an electronic pickup. Handcrafted in Spain, the 4NCWE model is a cedar-top with Indian rosewood on the back and sides. Like the other Ramirez guitars we have listed, this comes with a hard-shell case, so you won’t have to worry about the guitar being broken in transit.

Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.


Being by nature rather sceptical, I have to admit to initially dismissing many of the recording methods in this article as 'studio snake oil', and because there was usually too little time during my own sessions to experiment with new ideas, I'd usually end up with an SM57 glued to the speaker grille by default. Taking the time out to trial the above techniques in the studio showed me quite how much I had been missing — not only much better raw recordings, but also tremendous extra flexibility at mixdown. But don't take it from me — listen to the audio examples for yourself and make up your own mind. If they don't expand your recording horizons, I'll eat my SM57...
Different types of guitars have different sound aesthetics, e.g. different colour-spectrum characteristics (the way the sound energy is spread in the fundamental frequency and the overtones), different response, etc. These differences are due to differences in construction; for example modern classical guitars usually use a different bracing (fan-bracing) from that used in earlier guitars (they had ladder-bracing); and a different voicing was used by the luthier.
The guitar is hand-made by Martin's top luthiers, using exotic cocobolo wood for the back and sides, mixed with a more conventional solid sitka spruce top. As expected from a high-end instrument, this guitar features impressive visual appointments, most notable of which is its ivoroid binding, beautiful rosette and fretboard inlays. While its price tag and looks may push you to just hide this guitar in the closet, know that this instrument is built to make music in the road or in the studio. Martin employed modern bracing and construction techniques to ensure the guitar stays reliable, beautiful and great sounding for a long time. Those that are lucky enough to own this guitar have themselves a treasure that they can pass down to the next generation of players.
At the core of this pedal is the Line 6 HX technology, which emulates the behavior of actual amp and stompbox components. This means that instead of merely copying the sound, it recreates the entire pedal or amplifier in digital format, allowing the models to respond to guitar tone and adjustments much like the real thing. While it originally had 70 effects, firmware updates have raised this number to 104, which is more than enough to keep you busy for months, if not years. Amp, cab and mic models were also increased to 115. Since Line 6 is well known for providing updates, it is reasonable to expect more expansions in the future. It does everything that the Helix LT can, with some extras, most notable of which is the LED scribble strips for labeling each footswitch. The Helix Floor also comes with expanded input/output options to work with mics and other instruments.

: "Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired


If you have been playing for a year or two and are looking at something to replace your current model, it would be wise to save a little more and go for a mid-range guitar that may cost between $300 and $500. On this kind of guitar you’ll notice a big difference in sound, as well as the feel of the instrument and the overall playability. Use this page as a starting point to find something that may suit you. Until then, you are probably best off sticking with your current guitar.

Resonator guitars are distinctive for not having a regular sound hole instead they have a large circular perforated cover plate which conceals a resonator cone. The cone is made from spun aluminum and resembles a loudspeaker. The bridge is connected to either the center or edge of the cone by an aluminum spring called the spider. The vibrations from the spider are projected by the cone through the perforated cover plate. The most common resonator guitars have a single cone although the original model patented in 1927 by John Dopyera had three and was called a tricone resophonic guitar. Resonator guitars are loud and bright. They are popular with blues and country guitarists and can be played with a slide or conventionally.
A lot of folks really like Squier guitars. In most cases, I'm not one of them. Fender’s economy guitars (Squiers) are cheap, coming in under $400 (often $200 or less), which can be an attractive option for a first-time buyer. However the price difference between a Squier Strat and a real deal Fender Strat isn’t big enough to make up for the quality hit you take when you buy a Squier.

{"id": "361091", "categoryId":"site5LRABAA", "name":"Vintage Leather Guitar Strap", "pageUrl":"/El-Dorado/Vintage-Leather-Guitar-Strap.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Vintage-Leather-Guitar-Strap-Black/361091000001000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"1", "message":"", "value":"85.00", "priceMin":"85.00", "priceMax":"85.00", "msrp":"85.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"11", "brand":"El Dorado", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"5.0", "reviewStarRatingInteger":"10", "reviewHowManyReviews":"1", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMI,site5LP", "stickerText": "", "isVintage": "0", "outletonly": "0", "checksum":"41079093650", "priceVisibility": "1", "itemType": "New"}


MusicMan is the story of two former Fender employees who decided to create their own company in 1971. In the beginning it was called Tri-Sonix, before they changed the name to MusicMan in 1974. While the first product of the brand was a tube/solid-state hybrid amp ─ the Sixty Five, developed with the help of a certain Leo Fender ─ the company became famous for its guitars and basses. The introduction of the mythical StingRay guitars and basses in 1976 is a milestone in the company's history. The guitar is an average seller (rock players find it too "clean"), but the bass and its active Tom Walker preamp that allows to boost certain frequencies is a huge success. After severe conflicts within the team, MusicMan was sold to Ernie Ball in 1984. The brand then started to endorse famous artists like Albert Lee, Steve Lukather (Toto), John Petrucci (Dream Theater), and Eddie Van Halen (Axis), and developed signature models for every one of them.


Though, it is important to know that diving into the world of building your own guitar pedals requires a vast amount of knowledge. A person who builds DIY guitar pedals should have a rather keen understanding to circuit board electronics, because this will allow them to understand how exactly to put a guitar pedal together, as well as troubleshooting.
Distortion effects are really like an overdrive pedal taken to another level. Many distortion pedals are simply overdrive pedals with the ability to dial in a higher gain setting (“Gain” can be thought of as the volume going into the overdrive components of the pedal). Some pedals will also have a built in equalizer to shape the tone of the distortion.
This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.
This tuning may also be used with a capo at the third fret to match the common lute pitch: G-c-f-a-d'-g'. This tuning also matches standard vihuela tuning and is often employed in classical guitar transcriptions of music written for those instruments, such as, for instance, "La Canción Del Emperador" and "Diferencias Sobre Guardame Las Vacas" by Renaissance composer Luis de Narváez.
1959 is widely considered to be the pinnacle year for Gibson’s mid-century solid body electric guitars, and no 1959 Gibson model is more famous than the sunburst Les Paul Standard. At first a commercial failure, the model was eventually adopted by some the world’s greatest guitarists – Jimmy Page, Duane Allman, Mike Bloomfield, Keith Richards, Eric Clapton, and Billy Gibbons, to name a few. The rarity and celebrity association of the model has pushed the values of original examples into the stratosphere. Gibson Custom’s 1959 Les Paul Standard is a painstakingly-accurate replica of these highly-valuable guitars rendered in detail so intricate that even the chemical composition of the parts has been scientifically examined and re-engineered – and that’s just one small example. Sonically, visually, and tactilely, owning a 2018 Gibson Custom Historic ’59 Les Paul Standard is as close as one can get to owning a priceless original!
Official Vintage Guitar Price Guide: This print guide, published by Vintage Guitar and Bass, is an annual guide that is re-published with updated information each year. The webpage above is handy because it shows links for all guides that have been published in one place and will continue adding links for future years. The link shown for each guide will take you to a store online where you can purchase the guide. It is known for being extremely thorough, and its latest edition, the 2017 guide, has appraisals for 2,000 brands of guitars, basses, amps, effects, mandolins, steels, lap steels, ukuleles and banjos.
On a Strat, you can also replace one of your tone pots with a “blender” pot. This allows you to “blend” in the neck pickup when your selector is in the bridge or bridge/middle positions, and allows you to blend in the bridge pickup when in the neck or neck/middle positions. You can have the neck/bridge on, or all three on at once. There are slight, but noticeable, tonal changes from one end to the other, as the blend pot does have some attenuation. You do have to buy a specific blender pot to do it right; otherwise when turned down it won’t shut the third pickup off all the way. Super cool mod, and doesn’t change the look of your Strat.

The Teisco TG-54 was a two-pickup Les Paul, named for the year it was designed, 1954, not long after the original! It had a large white plastic covered pickup at the neck, set into the pickguard, and a slanted metal-covered pickup set into a metal tailpiece assembly, sort of like a Telecaster. Again, strings passed through the tail assembly and the body. Similar to the J-1, the volume and tone controls (same knobs) sat on a small rectangular plate, this time metal like a Tele, with an added chicken-beak three-way rotary selector switch.


Get ready to rock! This kid's electric guitar set has everything little rockstars need to jam out in style and foster a growing passion for music. Whether a child is just learning the basics or has mastered every chord, this guitar is the perfect practice tool to lift them to the next level. Hook it up to the included 5-watt amplifier and let your kid experience music like never before!
Description: 1966-1967 Model. Body: Alder - Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Headstock: 6 In-Line - Bridge: Vibrato - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Single Coil - Pickup Configuration: S-S - Guitar Features: Pickguard - String Instrument Finish: Blonde, Black, Sunburst - Guitar Type: Electric
I've used 3 effects applications till now: Amplitube podfarm and guitar rig 5. The best software I found so far is guitar rig the sound it gives is amazing it has some pretty good presets and it has an intuitive interface I recommend trying out demos of every software to see which better suits you. I recommend guitar rig. I would suggest using a PC instead of a laptop because they're processor intensive. Anything that's part of the is series is great (i3 i5 i7). Good luck and remember to get asio4all drivers google it and get the newest drivers
Epiphone returns with yet another Solid and high-quality Les Paul Standard electric guitar, this time, an ebony styled-version of the Les Paul series. The body of this ebony version is made of solid and durable mahogany wood construction, including a maple top design. The fretboard of this Epiphone Ebony version electric guitar is made of rosewood, containing 24.75 scales.
Three CraViolas were offered. These had a strange asymmetrical shape with a pear shape, no waist on the bass side and sharp waist (and almost cutaway taper) on the treble. Soundholes were D-shaped with fancy rosettes, with a pointed tortoise guard on the steel-stringed versions. These had slotheads with a Woody Woodpecker-like peak pointed bassward. The bridges were similar to the mustache version on the Country Western. The CRA6N Classic ($150) had a yellow spruce top and full-grained Brazilian rosewood body, no inlays or pickguard. The CRA6S Steel String ($160) was a similar steel-string with pin bridge and diamond inlays. The CRA12S 12 String ($175) was the 12-string version.
Mr. White is an incredibly underrated guitarist. His singles (From the White Stripes) always span with just three to four chords and his simplistic blues rhythm and picking styles have him overlooked most of the time. However, his masterful use of the Digitech Whammy and is erratic playing make for some of the most memorable guitar solos ever. Check out Ball and a Biscuit and try not to like that solo. One of my favorite Jack White moments was during the 2004 Grammys, where he took 7 Nation Army and went into a cover of Son House’s Death Letter (another artist who I had to unwillingly cut out of the list). In an awards show celebrating Justin Timberlake and Missy Eliot, Jack White took time to give a salute to where things got started, to an artist born a century ago.
Guitar technicians need a high school diploma or equivalent, though some community colleges offer programs in guitar technology. Apprenticeships or on-the-job training may also be available. These professionals should have hearing acuity for tone and pitch and the ability to play guitar. They should know how to use electronic tuning devices, as well as hand and power tools. Guitar technicians should also be skilled at woodworking. According to 2015 data from the U.S. Bureau of Labor Statistics, musical instrument repairs earn a median salary of $35,660.
When you hit a string it will vibrate. It will continue to vibrate until the energy put into it is expended. Where does that energy go? Well, it is expended through movement. That movement is what the pickup "sees" and translates into sound. In a world where 100 % of the initial energy imparted by the strum to the string was expended through movement, wood doesn't matter.
Neither player uses any sort of stomp boxes in their rigs. In an effort to emulate his heroes, Bo keeps it straight ahead, using no effects at all, while Frank opts to program his effects via rackmount gear and to make setting changes through a MIDI controller. The advantage is that he can change gain levels, EQs, and effects instantly with one tap, instead of having to do the stomp box break dance in time for the next down beat. Both axemen prefer to get their overdrive the old-fashioned way, by driving the tubes in their amps.
The original National and Dobro companies produced the most popular and most imitated acoustic Hawaiian guitars ever made, and Valco was no slouch when it came to their electric successors. Indeed, lap steels are among the most highly regarded of Valco’s products, regardless of the brand name on the headstock. The more affordable steels still command a respectable price considering their ubiquity, and the higher-end models usually match the equivalent Fenders and Gibsons in appraisal. This is particularly true of the National Grand Console, one of the staple steels of the 1950s.
This vintage Teisco Del Rey Japanese guitar was made in the 1960s and has a classic sunburst finish and tulip shaped body. Manufactured in Japan by the Tokyo Electric Instrument and Sound Company (yeah, you got it…TEISCo!), the Del Rey measures 37 3/8 inches x 11 1/4 inches at widest and longest points. The fretboard measures 18 3/8 inches in length from the nut to end. My dad bought this one from some guy at his work, who later supplied him with the original whammy bar and headstock hardware which he found later! The relatively small body size of the Teisco Del Rey was appealing to my wife, who was on the lookout for a smaller-sized guitar she could play. My dad replaced the original tuning pegs with much nicer chrome ones from a 1980’s Gibson SG and we took it home. However, she realized that she didn’t care much for electric guitar, so we decided to clean it up and sell it. Everything was in excellent shape, but it did have some electrical issues. The volume/tone pots were filthy and you could hear a wall of white noise as you turned the knobs. At the time, I didn’t know the marvels of Deoxit and contact cleaners, so I didn’t know how easy it would have been to clear that problem up. One of the pickups or pickup selectors also didn't seem to be working. It played OK without noise or distortion when the volume and tone knobs were set to 10 and the pickup selectors set to "black up, white down", but the sound could still fade in and out sometimes if you bumped the buttons or switches the wrong way. Again, simple issues that I could have cleared up with a soldering iron and contact cleaner. In any case, we meticulously cleaned it and put it up for auction. Despite the minor problems, a bidding war ensued and now this Teisco Del Rey Japanese guitar lives in Australia! Overall, the Teisco is a good playing trashy guitar with loads of funky style. Scroll down for more Japanese Guitars from our collection!
Wherever you purchase your first guitar from, make sure to take it to a local professional or friend with some experience and ask them to set it up for you. They may charge you a few dollars, but it’ll be worth it to have fresh strings, a good action, and correct tuning. If possible, ask them if you can watch how they set it up, so next time you can try it yourself.

Bridges and Tailpieces – These two parts of the electric guitar work in unison to control the tone and playability of the guitar. The bridge is mounted on the lower portion of the guitar. The strings are routed over the bridge before ending in the tailpiece. Bridges help to tune the strings of varying length, thickness and metals and they allow easy adjustment of the string length.


The main benefit with tube amps is the tone. They offer what is often described as a pure, natural, creamy or fluid guitar tone, which is incredibly responsive to the player’s dynamics. When pushed hard enough, they overload and produce natural overdrive (which is how overdrive first came to be). While their tone is hard to beat for all styles of music, tube amps tend to be expensive, harder to maintain and heavier than other amps. For more on tube amps, check out our dedicated tube amp page.

A good starting point when recording is to place the mic close to the grille and positioned over the centre of the speaker. However, it's worth moving the mic a little off centre if you're after a less toppy sound.Guitar amps tend to use 10-inch or 12-inch speakers without tweeters or crossovers, so they have a very limited upper-frequency response. These speakers may be used singly or in multiples, in either sealed or open-backed cabinets. The familiar overdrive sound was almost certainly discovered by accident when early amplifiers were driven beyond their design limits in an attempt to obtain more volume, but because of the restricted top end of the speaker systems employed at the time, the distortion was stripped of its more abrasive upper harmonics and actually sounded quite musical. So, what started out as a side effect of limited technology soon became adopted by blues players and turned into a distinctive style, which later evolved into rock, and then into heavy metal with all its spin-off genres.
A small number of bass amps designed for the upright bass have both a 1/4" input for a piezoelectric pickup and an XLR input for a condenser microphone mounted on the bass, with a simple mixer for combining the two signals, as described below. Some Acoustic Image amps have a dual input design. A rare feature on expensive amplifiers (e.g., the EBS TD660) is the provision of phantom power to supply electrical power over the patch cable to bass pickups, effects, a condenser mic (for an upright bass player) or other uses. A small number of 2010-era amps that have digital modelling features may have an input for a computer (e.g., USB), so that new digital effects and presets can be loaded onto the amp.
On the back of soundboards is a pattern of struts and braces that provide stability to the soundboard, while allowing it to vibrate as uniformly as possible. The choice of wood used for these struts and braces is much less critical than it is for the soundboard. However, the bracing pattern can have a significant impact on the sound of the instrument. Guitar makers have tried many different bracing patterns in attempts to add distinctive tonal qualities to their instruments. In addition to bracing patterns, hardwood plates designed to add support to the bridge and soundhole areas are also commonly attached to the underside of soundboards. Though the acoustic impact of these plates are minor compared to the bracing patterns, their size, shape and wood type can also affect the tone of the guitar.

Semi-hollow, slim, and designed with a comfortable ‘C’ shape exterior, the D’Angelico EX-DC Standard is a high-price electric guitar with professional grade features. Creating a more natural tone that delivers an organic quality to its sound, the Standard guitar uses Kent Armstrong Vintage humbuckers for a focused sound free of excess reverberation. The Super-Rotomatic tuners maintain their tuning accuracy for a longer time, due in part to the turning radius within the design. Strings remain at a comfortable tension due to the unique Stairstep tailpiece, creating both a strong resonant sound and assured sturdiness. A semi-hollow body designed with maple on the top and back, other features include a 3-way toggle that provides two modes of volume as well as two separate tones. Meant for use throughout various genres of music, the EX-DC Standard is an electric guitar to please the masses.
This right handed 6 string guitar is just so incredible. It is renowned to have been built in high expertise, from a brand that has been in the market for quite a long period of time. It has advanced  frets that make it unique in terms of sound and tune produced. It is quite easy to set up and operate, making it suitable for beginners. The  main reason is the price which is also relatively fair, ranging from around INR 3,999. Find more on:
Why We Liked It - Guitarists often have a love hate relationship with signature models, but we really think that the SE Angelus is a worthy addition to our rundown of the ten best electric acoustics you can buy right now. It’s a good price, offers some great design and hardware, and of course comes with the seal of approval from one of rock’s most accomplished guitarists.
A better idea is turning to established brands like Maton, Washburn, Epiphone, Fender… there’re plenty of respected manufacturers with long traditions in making guitars. No matter what type of guitar, all these companies have low-priced models that still benefit from the care and craftsmanship you’d expect from well-known brands. Prices start around $150 for basic types, then for $500-700 you’ll find an enormous choice.
Arch top body 16" wide across the top, carved spruce top, back not carved by arched by braces, rosewood back and sides, f-holes, style 45 backstripe, bound ebony fingerboard, 2 white lines inlaid down length of fingerboard at the edges, hexagonal fingerboard inlays on 6 frets (sometimes pearl, sometimes ivoroid), vertical "Martin" pearl peghead logo, nickel plated parts, sunburst top finish.
The Les Paul body style actually encompasses a few different designs: solid, solid-arched, and solid-chambered. Solid Les Pauls are made from a solid piece of wood, with some having a significantly arched top and a maple cap and some lacking a curved top and the maple cap. Chambered Les Pauls are arched, but the inside of the body is chambered, so there are a few cavities underneath the top.
B.C. Rich manufactured a ten-string six-course electric guitar, the Bich, whose radical shape positioned the machine heads for the four secondary strings onto the body, avoiding the head-heaviness of many electric twelve-string guitars. However, many players bought it for the body shape or electrics and simply removed the extra strings. The company recognized this and released six-string models of the Bich, a shape now generally incorporated into their standard Warlock.
Phaser – A frequency-based effect that makes a swirling, swooshing filtered guitar tone. Phasers use the principle of “phase” cancellation in which a filter passes over your guitar tone flipping the waveform at specific frequencies. This signal is then combined with your original guitar tone to give the iconic phaser effect used in songs by Van Halen, Pink Floyd and Smashing Pumpkins to name a few.
When two or more speakers are used in the same cabinet, or when two cabinets are used together, the speakers can be wired in parallel or in series, or in a combination of the two (e.g., two 2x10" cabinets, with the two speakers wired in series, can be connected together in parallel). Whether speakers are wired in parallel or in series affects the impedance of the system. Two 8 ohm speakers wired in parallel have 4 ohm impedance. Guitarists who connect multiple cabinets to an amplifier must consider the amp's minimum impedance. Parallel vs. series also affects tone and sound. Speakers wired in parallel slightly dampen[s] and restrain[s] them, giving what some describe as "tighter response" and "smoother breakup". Some describe speakers wired in series (usually no more than two) as sounding "...looser, giving a slightly more raw, open and edgy sound."[26]
Electric guitars are powered by electromagnetism—and electromagnetic induction to be precise. That might not sound familiar, but you've probably used it if you've ever ridden a bicycle at night with a dynamo-powered light. A dynamo is a simple electricity generator with two basic parts: a rotating coil of wire that spins around inside a hollow, curved magnet. As the coil spins, it cuts through the magnet's field. This makes electricity flow through the coil. Two electrical connections from the coil are wired up to a lamp and the electricity generated makes the lamp light up.

    Kahler Tremolo bridges feature 6-way adjustable string saddles, which really allow you to dial in your string action and intonation. They have a fairly wide range-of-motion, but less than the Floyd Rose. The Kahler’s have a smoother feel compared to the Floyd Rose, and also have a convenient locking mechanism to convert the bridge into a fixed bridge.
Another well established brand FMIC i.e. fender musical instrument company is widely recognized for manufacturing eminent guitars of superlative quality and texture. In India, the customers are satisfied form its products and won over millions of heart by providing brilliant guitar brands like FA – 100.So why waiting more? Quick make your purchase and enjoy the lovely music tone.
Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.
This is an American Fender Telecaster electric guitar played on the both pick-ups setting and is played through a Fender Bassman '59 Reissue with old valves in. This soundfont has the same presets as the Fender Jaguar above and is also recorded with the volume on the edge of break up on the amp (read the Fender Jaguar above for description of amplifier setting). This guitar is suited to jangly indie sounds or clean country sounds but can be very rocky with more distortion added. This guitar is also a classic that has been used in alot of types of music.
Mid-to high-priced amps may have other switches (which on some amps are switched on by pulling an existing rotary knob out) that boost or cut some part of the frequency range, such as "bright boost", "deep boost" or "mid scoop" switches. Amps with an onboard audio compressor or limiter, which is used to protect the speakers from sudden peaks in volume and from damage due to power amplifier clipping, may have only an on/off switch to turn on the effect (as with lower- to mid-priced amps), or they may have one or more knobs to control how much compression is applied to the bass tone (typically a ratio and threshold knob or just a single knob). Some 2000s-era amps may have an electronic tuner and a mute button, to mute the sound of tuning during a break between songs without having to change the volume settings. On some amps, vertical sliders may be provided to control a graphic equalizer, which gives the bassist control over a number of frequency bands.
Durability: Unlike individual stompboxes where you might use some sparingly, since your multi-effects unit contains all your effects you’ll be using it frequently. As such, it’s important that the build quality is up to par. This is where brand reputation comes into play as well, since you want the brand to stand behind their product in case anything bad happens. Rest assured the pedals we recommend in this guide are all from very reputable manufacturers with long histories of good customer support.
I own one of these that I found in the trash on the side of the road - I have to say it has a good bit of wear and looks like it might fall apart any second in blue with black and chrome hardware - you couldn't pay me to get rid of this thing. I love the way it sounds and plays - its the benchmark for me for all my other acoustics - I dig the sound of this beast. Been a total metal monster for an acoustic \m/>.<\m/
So, I've done what any self-respecting woman with a rather obsessive personality could do and trawled YouTube for all the best videos of Swift performing stripped down versions of her songs where it's just her singing against a minimal melody. I'm sure you'll agree that as much fun as queen of the squad, awkward dancing hero era Swift is, that these videos are all the proof you need that she doesn't need dance moves or supermodel friends on stage in order to rule.

Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.
Gibson lost the trademark for Les Paul in Finland. According to the court, “Les Paul” has become a common noun for guitars of a certain type. The lawsuit began when Gibson suedMusamaailma, which produces Tokai guitars, for trademark violation. However, several witnesses testified that the term “Les Paul” denotes character in a guitar rather than a particular guitar model. The court also found it aggravating that Gibson had used Les Paul in the plural form and that the importer of Gibson guitars had used Les Paul as a common noun. The court decision will become effective, as Gibson is not going to appeal.[48]
Distortion sound or "texture" from guitar amplifiers is further shaped or processed through the frequency response and distortion factors in the microphones (their response, placement, and multi-microphone comb filtering effects), microphone preamps, mixer channel equalization, and compression. Additionally, the basic sound produced by the guitar amplifier can be changed and shaped by adding distortion and/or equalization effect pedals before the amp's input jack, in the effects loop just before the tube power amp, or after the power tubes.
Most of the modern electric guitars are provided with several tones and volume controlling circuits which helps in controlling the string vibration and thus the electrical charge produced. These adjustments are mainly done with the help of knobs provided on the neck of the guitar. Thus, the more the number of electrical circuits, the better the guitar can be adjusted for different sounds.

{ "name": "Brown", "skuUrl":"/accessories/el-dorado-vintage-hand-tooled-leather-guitar-strap/361014000008000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 155.00, "formatedIntegerValue": "155", "decimalValue": "00", "isOnSale": false, "msrp": 155.00, "salePrice": 155.00, "listPrice": 155.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": false, "freeWarrantyAvail": false, "sku": "site1sku361014000008000", "displaySku": "361014 000008000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361014000008000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Vintage-Hand-Tooled-Leather-Guitar-Strap-Brown/361014000008000-00-140x140.jpg", "styleImgAlt": "Vintage Hand-Tooled Leather Guitar Strap Brown", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,240", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"82996536150", "restrictionType":"", "restrictionError":"" }


Hawaii was key in the development of the electric guitar. There was a giant Hawaiian craze in the 1910s and 1920s, with a rise in popularity of the island’s sounds and culture (as often seen in movies and Broadway performances). Integral to Hawaiian music is the Hawaiian-style steel guitar, which most of early electric guitar development modeled itself after.

MusicPCB.com – offers PCB projects to build guitar and bass effects, and synth modules. All PCBs are professionally manufactured, and include soldermask, a silkscreened component legend, and plated through holes and pads. They are designed to be easy to build, provide simple and clean wiring, to work well with your other pedals, modules, and instruments, and most of all to sound great and provide sounds and features not available in commercial designs. Each PCB comes with a PDF document with wiring diagram, schematic, build notes, and large modding sections with details on how to perform a variety of mods to tailor the design to your needs/taste.

There are no frills: a single channel controlled with a Volume, Tone and Gain knob. You can switch between 15 and 7 watts, and don’t forget that for an all-tube amp, that is a lot of volume! While not having effects may sound like a bummer, the stripped-down circuitry helps your guitar signal to maintain its purest tone. Simple, raw and with attitude, cool looks and a mere 5.5kg; be prepared to rattle your brain with an authentic “British” sound.
{ "thumbImageID": "APX600-Acoustic-Electric-Guitar-Vintage-White/L03937000005000", "defaultDisplayName": "Yamaha APX600 Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage White", "sku": "sku:site51500000208044", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Vintage-White-1500000208044.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Vintage-White/L03937000005000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/APX600-Acoustic-Electric-Guitar-Vintage-White/L03937000005000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000208043", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Natural-1500000208043.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Natural/L03937000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/APX600-Acoustic-Electric-Guitar-Natural/L03937000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Old Violin Sunburst", "sku": "sku:site51500000208047", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Old-Violin-Sunburst-1500000208047.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Old-Violin-Sunburst/L03937000003000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/APX600-Acoustic-Electric-Guitar-Old-Violin-Sunburst/L03937000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000208045", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Black-1500000208045.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Black/L03937000004000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/APX600-Acoustic-Electric-Guitar-Black/L03937000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Oriental Blue Burst", "sku": "sku:site51500000208046", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Oriental-Blue-Burst-1500000208046.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Oriental-Blue-Burst/L03937000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/APX600-Acoustic-Electric-Guitar-Oriental-Blue-Burst/L03937000001000-00-60x60.jpg", "imgAlt": "" } ] }
Alvarez has always been an under-rated brand. Beautiful workmanship, great sound- an excellent value for the money. I have one of the old six string "dove" guitars and a Yairi 12 string: both are close to forty years old and both still sound and look great and have never needed any repairs. I also have an old Martin six string. I have done the "blindfold" test with friends to choose the best sound between the alvarez and the martin - alvarez wins every time.
Hertz Guitar is a well known brand, which manufactures high quality guitars. The company was originated from Shanghai,China and North Korea. Their musical instruments were introduced on September 2009. They offer world class quality instruments from world class branded production houses. They maintain international standard. It mainly focuses on musical instruments as well as accessories. They manufacture a wide range of guitar. Available at below Rs. 12,040/- (approx).
Unfortunately, National’s line of instruments was not well diversified and, as demand for the expensive and hard-to-manufacture tri-cone guitars began to slip, the company realized that it would need to produce instruments with a lower production cost if it was going to succeed against rival manufacturers. Dissatisfaction with what John Dopyera felt was mismanagement led him to resign from National in January 1929, and he subsequently formed the Dobro Manufacturing Corporation, later called Dobro Corporation, Ltd, and began to manufacture his own line of resonator-equipped instruments (dobros). Patent infringement disagreements between National and Dobro led to a lawsuit in 1929 with Dobro suing National for $2,000,000 in damages. Problems within National’s management as well as pressure from the deepening Great Depression led to a production slowdown at National, and this ultimately resulted in part of the company’s fractured management structure organizing support for George Beauchamp’s newest project: the development of a fully electric guitar.[5]

The book provides examples of simple mathematical models for the complete signal chain consisting of the electric guitar and related accessories. Several do-it-yourself books have been written with the emphasis only on building a pre-specified circuit according to step-by-step instructions. This book takes one step further and brings up the designer perspective on guitar electronics. The importance of mathematics as a tool for design and analysis is emphasised throughout the text. Often in similar publications the use of mathematics is avoided as much as possible, but the fact is that mathematics provides ways to analyse circuits before spending time and money on random prototype builds. For more information on the contents of the book, check out the table of contents and the Google Books preview
There’s 200 unique patch locations for you to assign your own sounds with and make use of the effects for guitar and bass, including world class BOSS delays, reverbs, mod/pitch effects, overdrives, distortions such as the DS-1 and Metal Zone and more. A built-in tuner is extremely handy as is the onboard USB interface which allows you to load presets onto the unit. This multi-effects unit allows you to access the free MS-3 Editor/Librarian software on a Mac or PC where you can make changes to your effects, assign parameters and sculpt your sound in complete detail for later recall when you’re playing live. You can mix whatever pedals and sounds you want and have that preset ready to go in seconds.
Purchase a more suitable microphone, if necessary. If you have found that your mic really doesn't capture sound the way you need, you'll have to research to find the right mic for your situation. For example, you might use a large diaphragm condenser mic to capture crisp, pop rock tones.[32] However, you should be able to achieve consistently good recordings with the use of either a common:
Here you will find a selection of our most popular brands of acoustic guitars. This range includes Australian manufacturers Maton and Cole Clark, prestigious American companies C.F. Martin and Gretsch as well as fantastic value for money in Fender, Yamaha and Epiphone. We stock guitars ranging from beginner to professional, with and without pickups and in all different shapes, sizes and finishes.
People that "hear a difference" are usually pre-conditioned to hear one. If you were removed from the guitars presence completely and only given anonymous samples of their tone, it's highly doubtful you'd identify, match or even come close to choosing 100% of the guitars tones correctly. Especially based on some imagined effect the wood is having on the sound.
It's always hard to rate amps when mixing high gain with vintage, boutique amps and the mass produced monsters, but including S.S. and digital technology seems to be a unrealistic stretch. That being said, this manufacturer is making some of the best sounding vintage type tube amps I've heard to date. their lineup of vintage Fender style amps are all excellent, and considerably more affordable and reliable. If you are a fan of the tweed, black and silver faced gems, you have to give Victoria a try. If you prefer something with a unique spin they make their own unique creations as well and they are all serious tone machines. In so far as tube amps go, these guys are definitely in my top five. Speaking of boutique, where is Carr?
Pre-delay: No pre-delay? No problem! Some reverb plug-ins, from freeware favourites to tasty convolution types, don't offer pre-delay — a user-configurable gap before the onset of a reverb's early reflections and tail. It's useful to have, though, as it can contribute to the clarity and separation of individual voices and instruments in a mix when large amounts of reverb are used. Using most software DAWs it's straightforward to rig up a pre-delay for a reverb (or any other effect) that doesn't have one. All you do is set up your reverb on an aux track or channel, but place a simple delay plug-in in a slot above it. Set both plug-ins' wet/dry mix parameters to 100 percent wet, and feed them some audio using an aux send on your normal audio tracks. Now the delay plug-in operates as a pre-delay for the reverb: easy! This kind of 'modular' pre-delay actually opens up some interesting possibilities. By using a multi-tap delay, or a simple delay with some feedback, your dry signal can be fed to the reverb several times, making for longer, more complex — or plain weird — reverb tails. Robin Bigwood
Let me shoot you some names Mr Pro Guitar player. When those you mention can play with the likes of Jack Pearson you can put them on a list. You didn’t even touch on country or bluegrass so I have to assume you know nothing about them. So let me throw this out there. There is only ONE called Mr. Guitar. Chet Atkins. His protege, Jerry Reed is another great. Let’s try Merle Travis, Jody Maphis and in recent years Redd Volkaert. I think you need to expand your listening radius. Let’s not forget the man who likely has his name on your guitar, Mr. Les Paul. Then I would ask you listen to bluegrass flatpicking. You want speed? These guys can play with Ygnwgie and do it on a Martin D28.

The pickups on an electric guitar can only pick up the vibrations of the string and convert those vibrations into electricity, which is ultimately converted into sound waves that emanate from the speakers. Do the pickups shape the sound? Of course! Can pickups mask the characteristics and make two electric guitars with different tonewoods sound the same? Yes again. So, I guess the correct answer to the question if wood makes a difference in the sound of an electric guitar is “It depends”. A pickup that can’t pick up these subtle overtone differences, enough compression, or other kinds of dynamics-killing processing, will kill the dynamics of any guitar, regardless of tonewood. Does that make it a bad guitar? Not necessarily – it depends on what the musician is after.


Tube amplifiers are the original amplifier and still seen as the best way to amplify an electric guitar – and for good reason! Despite impressive advances in amplification technology, nothing beats the natural sound of a vacuum tube that has been pushed to its very limit. In fact, for many guitarists it’s either tube or nothing, as the volume, vibe and fluid sound profile of these amps is extremely hard to replicate. One model we really like is the Hughes & Kettner TubeMeister TM18H, which has killer looks, delivers a delightful tube tone, has switchable wattages, and doesn’t break the bank.
Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.
Here we have a great D-28 clone from the finest Matsumoto Japanese guitar factory with a lot of history of making premium guitars Aria this is a AD-35 model these high quality D-28 copy’s were made in Japan for a short time frame of about a decade or so I believe discontinued in early to mid 1990’s for the Japanese domestic market not seen in the US until recently. Aria Dreadnought / Aria Auditorium SERIES The pursuit of perfection - This was Aria’s theme pursuing continuously ever since they started to manufacture guitars in 1956. This Aria Dreadnought / Aria Auditorium series lent brilliance to the early and middle days in the history of Aria acoustic guitar they know how to make great guitars this is model is no exception. The high standard for workmanship and materials are simply second to none. This instrument produces a Rich sound and offers the intermediate - pro grade playability from the determined beginner to the accomplished player. With its premium Solid Sitka Spruce top, will increase the volume and dynamic complexity of sound as you play it more and more. Noted Japan’s advanced finishing skills learned over decades this gloss vintage thin poly finish allows tone to jump of its sound box. AD-35 features Solid sitka spruce top and beautiful rosewood back and sides -bridge and fingerboard, the body binding, the center line of the body back and so on. I believe the original brochures specs were all solid woods on this run from Aria I look and can not tell you be the judge for yourself. This is recommendable model to guitar players who want to own a high end Martin D-28 but on a realistic budget you wouldn’t compromise much here surprisingly. This example has been upgrades here at JVGuitars with a Martin bone nut and compensated saddle - solid ebony decorotive with Abalone detail bridge pins and new set of Martin Marquis strings .... she has been fully cleaned and polished from headstock to bridge pin and natural rosewood re-hydrated with lemon oil We also leveled -dressed -recrowned-polished refined frets .... she plays and sound like a MUCH more expensive guitar now... sure to please for decades to come She’s a beauty and easily in 8.7/10 condition with a few insignificant blemish nicks - scratched we have addressed by lacquer tip color matched touch up and repolished Specifications: Top : Solid Sitka Spruce Back & Sides : Rosewood ... said to possibly be solid woods ... little is difinitivly known of this series just looking it looks to be solid you judge for yourself Neck : Mahogany Fingerboard : Rosewood Bridge : Rosewood Hardware : Chrome Finish : vintage gloss Hand crafted in Japan Vintage very good used condition Sound is really good!!! Contact Joe to buy it at jvguitars@gmail.com .
Most of Peter, Paul and Mary’s work had splendid fingerstyle guitar work. My favorite is “Don’t Think Twice It’s Alright”. Paul Stookey also had some fine acoustic work going solo with stuff like “Sebastian” and “The Wedding Song”. “The Wedding Song” was supposedly “must learn” stuff for aspiring acoustic players in the 70’s (so they could play at their friends’ weddings).
The very first thing to remember about pickups is that the active option is not necessarily better than the passive choice, and vice versa. Each type brings its own set of drawbacks and benefits. Passive pickups might be limited in terms of signal strength and tone shaping, but they are much more expressive in comparison to the active pickups in terms of picking and strumming intensities.
The dark underbelly is Lou Reed’s comfort zone. Despair and degradation are his muses. Emerging in the mid Sixties at the helm of the Velvet Underground, he offered up a gritty black-and-white alternative to the rainbow-colored pyschedelia of the prevailing rock culture. He brought us along, albeit reluctantly, to meet junkies and hustlers, S&M bondage goddesses and suicidal transvestites. He was one of the first rock guitarists to embrace chaos truly and wholeheartedly.

Awesome amp. This one sounds awesome and is not ice picky like some I’ve Owened before. This one sounds awesome and is in great shape (see pics for condition, few drinks, but nothing noticeable u less u are super close). Unfortunately I am listing this and my Jonny marr Jaguar since I need cash. Will only sell one item. If my guitar sells, this will be unlisted
The fretboard (also called the fingerboard) is a piece of wood embedded with metal frets that constitutes the top of the neck. It is flat or slightly curved. The curvature of the fretboard is measured by the fretboard radius, which is the radius of a hypothetical circle of which the fretboard's surface constitutes a segment. The smaller the fretboard radius, the more noticeably curved the fretboard is. Fretboards are most commonly made of ebony, but may also be made of rosewood or of phenolic composite ("micarta").
If you choose, every hole is drilled for each component, including neck, bridge, pickguard and strap button mounting holes. If you choose the optional snap together wiring, then no soldering is required; all electronics connect together with easy to attach connectors. We have done most of the hard work for you! The body needs finish sanding only but should require no filling.
An electric guitar is an expensive toy, so deciding who to buy it for is very important. Depending on the electric guitar’s purpose, its size and sound have to align with the player’s taste and goals. Profciency is also another deciding factor. If you are a beginner electric guitar player, the most important things to keep in mind is how easily you can play the electric guitar. What type of body style is suitable? What types of tones suits your tastes? These are the types of questions anyone should ask themselves when deciding who to buy an electric guitar for.

Want to know more about how to distinguish all these guitars? Until a few years ago there wasn’t a good (or any!) English language reference book for Japanese guitars of the 1960s. But my co-author on this piece, the esteemed Frank Meyers of Drowning In Guitars, has written an excellent primer on this subject which can help demystify the confusion around a lot of these guitars. You can pick up your own copy here.


The honest truth lies with the listener’s ear and capability to identify a sound with an individual player.  B.B. King was known for his tone and only later revealed his secret mentioned above.  It wasn’t even really a secret; it was more of a physical shortcut that allowed him to express himself.  You should choose what feels and sounds best for your own musical expression.
By 1954 the Teisco line had begun to grow. Some valuable reference is available in a Japanese history of Teisco guitars, which is written completely in Japanese (which I unfortunately can’t read). This has an early photo of the company’s founders and presumably engineers and designers, mugging around a car parked in front of the Teisco factory. The photo is from the ’50s (1954 or later), and the instruments in their hands and surrounding them are at the core of the ’50s line. Shown were two small Les Pauls, two single-cutaway archtop electrics, at least three Hawaiian lap steels, and at least four amplifiers.
A multi-effects device (also called a "multi-FX" device) is a single electronics effects pedal or rack-mount device that contains many electronic effects. In the late 1990s and throughout the 2000s, multi-FX manufacturers such as Zoom and Korg produced devices that were increasingly feature-laden. Multi-FX devices combine several effects together, and most devices allow users to use preset combinations of effects, including distortion, chorus, reverb, compression, and so on. This allows musicians to have quick on-stage access to different effects combinations. Some multi-FX pedals contain modelled versions of well-known effects pedals or amplifiers.
×