The first type of distortion pedals were fuzz boxes. They produced a distorted tone that allowed guitar players to play singing leads. Like the name says, the tone was more "fuzz" than tube distortion, sounding like a damaged speaker cone. Still, fuzz pedals can be heard on countless recordings from the 60's (think of the opening guitar riff in the Rolling Stone's I Can't Get No Satisfaction or just about any of Jimi Hendrix's riffs.) Fuzz pedals remain popular today.
Seven-string electric guitars were popularized among rock players in the 1980s by Steve Vai. Along with the Japanese guitar company Ibanez, Vai created the Universe series seven-string guitars in the 1980s, with a double locking tremolo system for a seven-string guitar. These models were based on Vai's six-string signature series, the Ibanez Jem. Seven-string guitars experienced a resurgence in popularity in the 2000s, championed by Deftones, Limp Bizkit, Slayer, KoRn, Fear Factory, Strapping Young Lad, Nevermore, Muse and other hard rock and metal bands. Metal musicians often prefer the seven-string guitar for its extended lower range. The seven-string guitar has also played an essential role in progressive metal rock and is commonly used in bands such as Dream Theater and Pain of Salvation and by experimental guitarists such as Ben Levin.
Compressor pedals add a softening effect too, by reducing the front edge of notes and amplifying their tails. This increases sustain by bumping up the signal as the note fades out. Most compressors allow you to control both the thresholds (upper and lower limits) and the knee (the speed with which the signal is raised or lowered). The big appeal for guitarists is the compressor's ability to simulate the natural compression that tube amps generate when driven at medium to high levels. A good compressor can help thicken up the sound of your guitar and add extra punch to your performance.
Electric basses tend to use a medium jumbo fret as most Fenders have thru the years. There are some folks who like the medium or even the very narrow/small mandolin fretwire for basses – this is more of a vintage feel, like the earliest Fender basses (Fender created the Precision Bass in 1951). Since string height for bass strings is higher due to gauge and tuning, they are easy to grip and many bassists do not seem as concerned about fret height as guitarists.
The guitar is built of full, all-solid maple that gives a nice clean tone and helps to avert some of the feedback prone to other fully hollow guitars. There’s a mahogany set neck to both help with longer sustain and to give you the premium fit and finish usually reserved for more expensive hollow-body instruments. The two ACH-ST humbuckers aren’t ultra-heavy metal pickups, so you won’t get a ton of snarling distortion out of the AF55, but you can push an overdrive sound to the next level if you want to. It all adds up to a sound that’s perfect for a player who’s looking to go for the jazz/blues vibe, or someone who’s looking to go for a singer/songwriter roots project. The trapezoid tailpiece also gives you a nice nod to vintage axes, too.
One type of "effect" I've thought would be useful to have in a multi-pedal, though I've not seen it, would be to have a configurable automatic gain control (level compression) which would be applied before a distortion effect, followed by a gain adjustment after the distortion which would undo some or all of the effect of the previous AGC. For example, things might be set up so that playing at a level of -20dBm would boost the signal by 21dB (clipping slightly) and then reduce volume by 20dB, while playing at -10dBm would boost by 12dB (clipping a bit more) and then reduce by 12dB. – supercat Apr 30 '13 at 22:01
Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.
and i dont know how the new ones are, but the only ones, though called AD3000, they weren't like the other 3000 series guitars Agile offered. back then, they came with maple necks. they also came with 3 or 4 piece bodies, while AL3000/3100 etc came with 2. this came with a matching headstock, which only the 4000 series offered....so its almost as if the AD3000 was a missing link between the different series of guitars....
Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered. A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.
One look around our shop and you'll see that we're serious about offering our customers a large selection of instruments, equipment and gear. You'll find both new and used instruments, and our top-notch staff are here to help you choose exactly what fits your needs, preferences and budget. If you're interested in learning new skills and techniques, check out the group workshops we host on a regular basis. We cover a wide range of music topics, so stop by and see what class we're holding next. Can't make it in? Give us a call at 505-889-6300, and we'll be happy to answer all your questions.
Modern electric guitars most commonly have two or three magnetic pickups. Identical pickups produce different tones depending on location between the neck and bridge. Bridge pickups produce a bright or trebly timbre, and neck pickups are warmer[when defined as?] or more bassy. The type of pickup also affects tone. Dual-coil pickups sound warm, thick, perhaps even muddy; single-coil pickups sound clear, bright, perhaps even biting.
I was very surprised by your article on acoustic guitars and the ratings given by you. I have been playing acoustic guitars for most of my 62 years and have owned and played all of them. I cannot believe that you put Seagull guitars at the top of your list! I've played as well as owned a Seagull guitar for some time and I have found it to be constructed out of cheap materials with no regard to detail. The guitar's intonation was horrible... could never get the damn thing in tune beyond the fifth fret,which frustrated me very much. Lastly, the lack of a finish on the product lent itself to getting stains on it. With that being said,I just cannot see how you can even be on that list at all.
My sound is pretty clean with no overdrives or distortion. Besides a tuner and a volume pedal, I use a delay and a reverb pedal (TC Electronics) and I have a freeze pedal as well (EH Superego). I’m never sure if the freeze pedal should come before or after the delay and reverb. By trying both options I can’t really hear a difference in the overall sound which I guess is fine. Any thoughts or recommendations are welcome.
Boss is an effects legend, but thanks to the digital expertise of parent company Roland, the brand now also has an amp that promises organic, valve-like tones at an impressively low price. It does this by using the same Tube Logic technology employed in last year’s 150-watt Waza Craft head, and other Roland amps. The K100 doesn’t invite direct comparison with specific amp brands and models. Instead, there are five generic voices: Acoustic, Clean, Crunch, Lead and Brown. You can pre-load 15 different effects types into the amp, with 55 to currently choose from when you link the Katana to the Boss Tone Studio application. The Katana may look plain, but its tones are truly exceptional. The Crunch voice is responsive and dynamic, while the Brown solo sound is as good as many USA valve-powered competitors. Start using the Tone Studio editor and the Katana’s edge becomes sharper still, with different effects chain presets and assignable control parameters.
2. You have me to help you out! I’ve sorted through a bunch of the top acoustic-electric guitars and come up with a list of what I think are five of the best acoustic-electric guitars under $1000. I’ve been playing for almost 30 years, so I know a little bit about guitars. But just in case you don’t believe me, check around for yourself. Every one of these instruments is highly rated and top quality.
Drummers have their cowbells and double bass pedals, vocalists have their harmonisers and auto tune. We guitarists, however, are the luckiest: we get effects pedals. Ranging from subtle slap-back echoes to wild and crazy ring modulators; from simple boost pedals to drive your amp a little harder to insane distortion stomp boxes, we can have it all.
Play with it, see what happens. Worst case; you’ll set it, forget it or use it as a means to dial out some hum. Best case, you’ll find the guitar in your hands is far more versatile than advertised and use the tone knob to wield it like a musical samurai and leave everyone wondering…”how the hell do they get so many sounds without a guitar change?!”
After Fender’s decision in 1982 to switch Squier’s production from strings to guitars, the Stratocaster was one of the first models put under the Squier production line in Japan. It was the most commercially successful guitar Fender had produced. Originally in 1982, the headstock had a “Fender” name written in large script, followed by “Squier series” in smaller script. In 1983, this was later changed to the current 1970s large headstock featuring “Squier” in larger script, followed by “by Fender” in smaller script. Since then, there have been several variations of headstock size and Squier logos, typically based on what series the guitar is.
Build Your Own Effect Pedal. Mammoth Electronics makes an effort to offer our customers a very neatly packaged and personally customizable effect pedal kit. Each guitar pedal kit comes equipped with everything you need to build your own effect pedal as quickly and inexpensively as possible without sacrificing quality. These DIY guitar pedals kits are designed to make building your own effect pedal easy for everyone from the hobby builder to the manufacturer. All parts are labeled and packaged in the kit for easy identification. Enclosures are fully customizable to the user specification and specially wrapped in a protective foam for safe transit. We’ve provided a wide selection for any effect pedal kit needs you might have. From a simple boost pedals, and fuzz pedals, as well as overdrive, distortion, and compression kits. We also have a wide range of modulation kits, including delay, reverb, tremolo, and phaser effect pedal kits. If you need a quick fix or a more complex guitar pedal kit, Mammoth Electronics offers a variety of options making it effortless to build your own effect pedal with a sound quality that will make an impression. We work hard to build relationships with only the best brands for our customers. These strong relationships allow us to provide extremely competitive pricing on all of our DIY guitar pedals kits.. We’re confident you will save yourself money & time if you build your own effect pedal with Mammoth Electronics. Mammoth Electronics offers customized DIY guitar kits and effect pedal kits that allow you to experiment with, create and amplify your own taste of music, without compromising on the sound quality. With added protective layering, these kits are safe for transportation and transit. We’re passionate about helping our customers build the best effect pedal possible so please Check out our Facebook page where you can provide feedback, share tips or ask any questions you might have about your latest projects.
The only guitars that I have been able to find pictures of that have the little curly thingie on the headstocks have been Kents, Kawais and some kind of no-name guitar that looks like the factory took a red Kent 820 and sprayed black around the edges to create a “redburst” finish. The example above appears to has started as a regular sunburst finish with more red and black added. The neck, headstock, pickups, and body are identical to the Kent 820 except the name ‘Kent’ doesn’t appear on the guitar anywhere. Note that the hardware on it is the same as on the 820 shown. That bridge and tailpiece configuration is a little unusual for Kent 820s. (the 820 there is mine) The bridge and tailpiece on the Kent 823 is the more common configuration.
Chorus: Generally you won’t hear delay during the chorus, though guitarists who strictly play lead can still find ways to utilize it.Verse: It’s probably the most “delay friendly” portion of a song, providing the lowered intensity that makes room for the extra noise of the delay effect.Bridge: A short solo or lead guitar segment will usually be pretty tame in Christian songs, allowing for the use of heavy delay, as well as other effects.
Guitars in the JS series made in Japan have plates with a 6-digit numeric serial number which indicates the sequential number of JS production. These plates provide no other indication of the year of production. The early versions of these JS number plates (starting from around 1990) have a "J" prefixing the number, but the character was dropped some around J002700. The first 15 J number plates were set aside, with J000001 being used for a 1993 model which is currently in the Hoshino USA collection.
Gibson offers a whole variety of models, but if you want to experience this brand, Gibson Les Paul Standard is a must. This is as old school as it gets from a brand new guitar. The finish on this one is Cherry Sunburst, which is as iconic as the model itself. With two PAF humbuckers, you get to experience the vintage tone that launched Gibson into stardom.
The Les Paul body style actually encompasses a few different designs: solid, solid-arched, and solid-chambered. Solid Les Pauls are made from a solid piece of wood, with some having a significantly arched top and a maple cap and some lacking a curved top and the maple cap. Chambered Les Pauls are arched, but the inside of the body is chambered, so there are a few cavities underneath the top.
Generally, a band sounds the best to the audience when you have an attentive, knowledgeable sound person who is paid well by the band or venue. He also needs the right tools to balance the sound for the room. If all of the instruments onstage are blasting at full volume, the poor PA can’t keep up- and the people in the first few rows have their heads torn off by whatever instrument amplifier they are unlucky enough to be standing in front of. This results in an unbalanced mix that the sound person can’t fix. It might sound awesome onstage, but you want the audience to have a great experience too, right? With monitors, side fills, several amps/cabs, and a fort full of cymbals onstage, things get loud quickly, and everything competes for the same sonic space. It is easy for band members to get into ‘volume wars’ while the sound dude/dudette takes everyone out of the mix but the vocals right before they throw up their hands and shake their heads. The audience might not know what sonic problems are occurring, but they definitely will hear it. An audience member describing a gig like this to a friend might say, “I saw this band, but they sounded terrible.” No one wants that kind of review. We spend a lot of money on guitars, pedals, amps, and microphones. But many musicians at the gig just set everything up and hope for the best.
The Epiphone Dove Pro continues to work its old school magic into the hearts of guitarists, new and experienced alike. Its classic styling seems to be a major part of its appeal, as most reviewers attest to. Value for money comes in as close second, with many satisfied that they are getting a great looking solid guitar at a very justifiable price point. It is used in many different musical styles, including country, folk and even rock.
Once you've mastered the intricacies of single-transducer miking, it's fun to start working in stereo. For true stereo recording, you need a matched mic pair as well as a twin-speaker amplifier, preferably one with built-in stereo chorus and vibrato (such as a vintage Magnatone or a Roland Jazz Chorus). Two separate amplifiers fed by the same stereo delay or multi-effects unit will also work.
Silvertone starter pack is incredibly hard to beat. The candy blue finish gives the guitar a gorgeous aesthetic that looks fully professional. The pickup selector has 5 positions, and there are two tone knobs to give even more control over the sound. Stratocaster fans will love this guitar! Also included in the set is a gig bag, small Silvertone amp, strap, 5 picks, Allan wrenches, strings, a clip-on tuner, and a tremolo bar.
Another early analog delay was the Binson Echorec, this unit recorded your guitar signal onto a magnetic disk much like a hard drive does. This unit was favored by David Gilmour of Pink Floyd. Analog delay pedals made their debut in the 70’s with the use of what was called bucket brigade chips. These chips move the signal down a line like the way an old bucket brigade would pass buckets of water down a line to put out a fire. The most famous of these pedals is the Electro Harmonix Deluxe Memory Man.
I didn’t want to spend much money (I’m a cheap bastard…part of me thinks I could never truly love a 59 Bassman unless I scored it at a yard sale for a hundred bucks. Now, tone matters more than money to me, but I tend to love the tone of crappy amps just as much as high enders, so I’d feel like a stooge dropping that kind of money on an amp. Especially since I play them and would ruin the collectable value of anything by gigging with it).
This old Nickelback hit is made up of only four different chords, written in the Key of G. During the verses only use G – C – F to progress, while the chorus of the song will add an Am (A minor) to change things up a little bit. This is a fun song to listen to and play along with, especially since the song is set a slower tempo, especially for a rock song.
You may hear many guitarists or repairman talk about pots. What are pots? The word “pot” is short for potentiometer. A potentiometer is a simple electronic device that adjusts the flow of electric current. Most pots are basically glorified resistors. There are two outer lugs that carry the voltage to and from the pickups. The middle lug is a “swipe” lug that resists the voltage. When the knob is turned, the swipe resists more or less voltage allowing the volume to decrease or increase. Both volume and tone knobs are pots. The only difference between these two pots is that the tone pot has a capacitor soldered to the ground lug. The capacitor short-circuits the high frequencies disallowing them from reaching the output jack and eventually the amp. Your guitar will sound less trebly the smaller the resistance of the tone pot before the capacitor. For a more technical description of a capacitor, see the electric guitar capacitor page.
Some bridges have a lock position and at this point should be engaged. Other floating bridges will need to be stabilized by using pieces of wood fitted inside the cavity (accessed from the back of the body) to prevent the tremolo block from moving. Vintage Fender-style tremolo bridges can be stabilized by fully tightening the spring tension screws. Whatever method is used, the bridge must sit as we will want it to when we are done with the set-up procedure- parallel to and nearly flush with the top- so care must be taken at this stage to get the position of the bridge right.
The Schecter Hellraiser C-1 Electric Guitar features a solid mahogany body that guarantees durability, along with a set-neck having ultra access. There is hardly a guitar which sounds great in regular, single-coil configuration, also in humbucker mode, but that’s what the Schecter does; having excellent sustain. The set of this guitar was great out of the box, while the fingerboard is good, smooth and quick.
He was no virtuoso, and that's the whole point: By snatching electric guitar from note-shredding technicians and giving it back to artists, freaks and poets, Kurt Cobain became one of the most important players ever. Cobain didn't invent alt-rock. But with his love of Cheap Trick, the Melvins and Kiss, he gave it the metallic power necessary to conquer the world. His playing wasn't all untutored squall, either: See the unconventional chord progression and mastery of quiet-loud-quiet dynamics on "Lithium" – and pretty much every other Nirvana song.
Epiphone Broadway Electric Guitar Make way for the Broadway, Epiphone’s big, bold and blindingly beautiful hollow body archtop guitar. The Epiphone Broadway has been a jazz club staple since the 1930s and it continues its soulful career with new appointments. The big-bodied Broadway features a laminated maple body with a select spruce top, a hard maple neck, a rosewood fretboard and Alnico Classic Humbucker pickups.
While electric bass players have used regular guitar amplifiers in large concerts since the 1960s, this is usually just for the higher register; a bass amp is still typically used for the low register, because regular guitar amps are only designed to go down to about 80 Hz. One of the reasons bassists split their signal into a bass amp and an electric guitar amp is because this arrangement enables them to overdrive the higher-register sound from the electric guitar amp, while retaining the deep bass tone from the bass amp. Naturally-produced overdrive on bass obtained by cranking a tube amplifier or solid-state preamplifier typically results in a loss of bass tone, because when pushed into overdrive, a note goes to the upper octave second harmonic.
Yamaha is famous Japanese Company known for producing an extensive range of musical instruments. It has caught the attention of the beginners and intermediate guitar players due to its budget-friendly product prices. Thus, it is the excellent choice for those who are going to have a first experience of buying any guitar. They can indeed get a good deal without costing a fortune. It is also suitable for Acoustic players. Yamaha continuously produces high-quality instruments that are unconquerable when it comes to the material or even sound quality.
Late 1934: "T" frets (aka tang frets) replace Bar frets on flat tops. (Most other guitar makers had stopped using bar frets much earlier.) Martins Hawaiian style guitars retain bar frets until at least 1938. The first Martin model to use T frets was the 00-17, introduced on a lot of 00-17 guitars #57305-57329 in 1934. Initially the first T-frets were special ordered by Martin to contain 30% nickel ("normal" fret wire is 18% nickel, 65% copper and 17% zinc). The higher percent of nickel, the harder the fret wire. This special 30% nickel fret wire was ordered from the Horton-Angell Company (the inventor and patent holder for barbed alternating "fish hook" T frets) on 8-31-1934 in an 100 pound lot, along with 100 pounds of "normal" 18% nickel fret wire. It's unclear if Martin ever used 30% nickel fret wire after this, because it was more expensive and not the norm. The same instruments also introduced the "T" neck reinforcement bar. Shortly thereafter T frets were standard. (Like with steel strings in 1922, Martin tried these innovations first on inexpensive low-end models to minimize financial damage in case the experiment was a failure.)
Beyond shaping and body design, there are a number of characteristics that distinguish the Gibson Les Paul line from other electric guitars. For example, in a fashion similar to Gibson’s hollow-body instruments, the strings of Les Paul guitars are always mounted on the top of the guitar body, rather than through the guitar body, as seen in competitor Fender’s designs. The Gibson also features a variety of colors, such as Wine Red, Ebony, Classic White, Fire Burst, and Alpine White. In addition, the Les Paul models offered a variety of finishes and decorative levels, a diversity of hardware options, and an innovative array of electric pick-up options, some of which significantly impacted the sound of electric music. For instance, in 1957, Gibson introduced the humbucker (PAF), which revolutionized the sound of the electric guitar, and eliminated the mains hum, which had previously plagued guitars with single coilmagnetic pickups.