Whether it costs $100 or $1000, the build quality should feel worthy of the money. Naturally with budget models you will find more laminated woods compared the solid woods and exotic materials used in expensive guitars. However, a good model will have laminates that are put together securely and cleanly, with no excess glue or rough spots. Even a good budget guitar will look and feel great.
Though the guitar is played through an amplifier which is often miked and recorded, the engineer or producer may later decide to use a different amplifier tone that's better suited to the character and timbre of the song, while preserving all the nuance and inflection of the original performance embedded in the direct track. The re-amp device allows the dry track to be sent to an amplifier again and properly miked and re-recorded for use as the final track.
Scratch and Dent - Demo Model full size electric guitar from Davison is the perfect way to start playing at an affordable price with features you'd normally expect on a much more expensive instrument. With a built-in humbucker pickup for that "rock" sound, you can plug this guitar into any amplifier or software system. It has a high gloss finished body and a contoured body for ultimate play-ability. Perfect for the aspiring guitar player of any age, this Davison is also Teacher Approved.

: : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! Hello, The Vox "plank" guitar I had was EXACTLY like yours! I don't have it now (January,2005). I sold it on eBay this last Spring on Ebay to a collector that works at Warner Bros. studio. He bought it for $460.00 !! There were a few bidders, so I would hang on to that 1950 skiffle guitar if I were you. They are very RARE! Peace! Rory
Practice amps often have an auxiliary line-in jack, so that the bassist can plug in a recorded music signal (often via an 1/8" jack), to practice along with a recording. The line-in jack can also be used to plug a drum machine into the amp, also for practice purposes. Some practice amps have a level control knob for the line-in input. Practice amps often have a headphone jack, with a feature that turns off the power amplifier when headphones are connected. This feature enables bassists to practice silently at night, to avoid disturbing others in adjoining rooms or apartments. Higher-priced practice amps aimed at pro bassists may have a DI out jack, so that the amp's preamplifier signal can be connected directly to a mixing board for a live show's sound reinforcement system or for a sound recording session. DI out-equipped units effectively turn the practice amp into a preamplifier unit.
Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.
hey guys im just curious as i just got back from a music store that had to basses from two different brands (local luthiers) and they were virtually the same (5 string, j pickups, Aggie 3 band mahogany body, set neck) the only difference was one had a alder tone block, i personally couldn't hear a difference but the owner of said shop said tone wise it makes a huge difference, any thoughts?

The Yamaha's FG series FGX800C is a perfectly machined instrument. If there is one thing Yamaha is known for, it's the quality of their mass-produced acoustic guitars, which people like to pooh-pooh due to the romanticization of extremely expensive handmade guitars. Yamaha has perfected this machining process to a point where you wouldn't really be able to figure out if the instrument was put together by a luthier or if it was made on a factory floor somewhere. This is the case with nearly every accessible guitar these days thanks to machines reducing errors and driving prices down.
Read Full Review It’s amazing to see a company that excels in all the products and services they offer, while other companies are struggling and scratching their heads to find a way to break through in the market. The best example of such success on Yamaha is with their long line of guitars and two of those guitars they have are considered by many is best for beginners. The guitars I’m taking about is the Pacifica Series PAC112 together with the PA012 featured here, which is also available on a guitar package.
Bass guitar tabs are basically meant to be plucked with fingers. One should try to pluck with all the four figures and if not possible then first two. One should also try to understand the rhythm of the drum and the tempo of the song, while reading the bass beginner guitar tabs mentioned below. The technique used to play these tabs is that the alphabets mentioned to the left of each string, is the string name, and have to be used. And the number represents the fret number. Try jamm'n with the bass guitar and the bass guitar tabs for beginners, that are mentioned below.
Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.

The rhythm of a guitar itself leaves many of us awestruck. Though many a time, beginners have this question of how to play guitar tabs. Practically they are easy, but need a lot of practice. Nothing that's worthy comes easy in this world! There are some easy guitar lesson tabs which when practiced, can help to learn the instrument faster. Let's scroll through some of these easy acoustic guitar tabs for beginners, and enjoy the experience of these guitar lessons. To become a really good guitar player, it is essential that one knows how to read guitar music sheets.
Re-amplified Distortion: This re-amplified distortion is audible by comparison, when switching between a solid-state and valve amplifier in real time. By paying close attention, it is heard as a fine spurious inter-cluttering within the music. This is clearly noticeable with efficient speakers but not with inefficient speakers. Valve amplifiers are inherently linear. Their natural gain is small and therefore require minimal or no negative feedback.
Gotta say a tele has to be the hardest but most rewarding to play. If you make a mistake, you will definitely hear it, but it just helps you're playing get more clean. Les pauls are a lot easier with the shorter scale length and forgiving pickups. Haven't played any metal guitars but I figure it has a lot to do with their setup that makes it sound so easy. You can do just about anything with the tremolo arm into a van halen kind of setup and it'll sound cool. Or you can whack one off with your guitar like steve vai
While a straight DI approach can work for clean sounds, simply plugging a guitar into an overdrive pedal and then routing the output of the pedal into your recording system will sound unnaturally thin and raspy because there are no speakers to take away the unwanted high end, but that hasn't stopped some people using it as a 'trademark' sound! For a more conventional sound, a speaker simulator is needed to filter out the unwanted higher harmonics. A passive speaker simulator, such as the original Palmer Junction box can be placed directly after an overdrive pedal or a regular guitar amp preamp output, but it will need to be recorded using a mic input rather than a line input (passive filtering always results in a reduction in level). Active equivalents (usually battery or phantom powered) are also available, which may offer a greater range of tonalities.
Typically, guitar amplifiers have two amplifying circuit stages and in addition frequently have tone-shaping electric circuits, which usually include at least bass and treble controls, which function similarly to the equivalent controls on a home hi-fi system. More expensive amplifiers typically have more controls for other frequency ranges, such as one or two "midrange" controls and a "presence" control for high frequencies. Some guitar amplifiers have a graphic equalizer, which uses vertical faders to control multiple frequency bands. Some more expensive bass amps have a parametric equalizer, which enables precise control of tone.
While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:

Epiphone's Les Paul series were originally designed to allow the budget crowd to experience this awesome guitar without investing thousands of dollars. That's something that hasn't changed to this day. The Epiphone Special II is among the most basic Les Paul designs on offer, making it perfect for beginners. We've chosen this particular guitar because of its neutral configuration which will keep up with you even after you've built plenty of skill.

The late ’36 Supro Amplifier was a spiffed-up version of the amp seen in the ’36 Bronson catalog, with a leatherette-type covering, leather handle, and enclosed, removable back. It now had an 8″ speaker, which spoke through a round grill with four bolts visible from the front. It’s impossible for me to tell from the illustration available to me, but this may still have had the resonator plate grill. The amp had four tubes and a “…special high fidelity circuit” that was “…rich in tone quality, and superfluous [sic!] in power.”
The Seismic Audio SADIYG-02 is based on the iconic Telecaster electric guitar. It comes with a single-cutaway body that's crafted from paulownia, a China native wood that's known for being light. The pickguard is already set into the body when you get the package, but you'll need to solder the input jack, the volume and tone knobs, the bridge pickup and the selector switch before you start using it.
You finally bought that guitar you've been eyeing for a long time. You open the case, gently remove it from its plush cradle, and hold it in your arms. A fresh pick in your fingers, you begin an elegant and complex arpeggio that ranges across the fretboard. Suddenly, right in the middle of the run, the strings start buzzing. You check your technique and it's fine. So what's the problem?
Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce and Cedar as the key to getting the desired tone from a guitar. Indeed, many beginning builders agonize over wood choice combinations as they relate to tone, with more experienced craftspeople offering suggestions that seem to assure the correct … [Read More...]
This is a very general question, but I will attempt to answer. I'll not get into brands, buy what "feels" right and has a good tone. If, a beginner, a good acoustic can be bought new for $200.00 - $300.00. If, you are an experienced or professional player, "The Sky is the Limit" only limited by how much you want to spend. My first guitar was used, and I paid $50.00. Now, I play a Gibson Song Writer, $3500.00. Hope this helps.

Anyway, here’s how you adjust the truss rod. This must be done with the strings tuned to whatever pitch you usually use. If your neck is too bowed (the gap you just measured is too big), you tighten the truss rod by turning the socket clockwise. It is recommended that you only turn the tool a quarter turn at a time (or even one eighth) and then give the neck some time to settle. You will also need to make sure the strings are still properly tuned after each adjustment.
As an aside, people talk about “gold foil” like it’s some sort of rare mineral!  I see auctions all the time dropping words like “GOLD FOIL” pickups, and “As played by Ry Cooder!!!”  So far, I’ve identified 12 different kinds of pickups that had gold foil somewhere on them, and many of them are made differently!  What’s the point?  Don’t buy the hype!!  You have to play these guitars, or check out our videos to get an idea pertaining to sound.  Poor Ry Cooder gets attached to every darn gold foiled guitar ever made, geesh!  And I don’t even know who Ry Cooder is!
Dorado instruments are of decent quality, but are often found at slightly inflated asking prices due to the attachment of the Gretsch name. Remember, these are 1970s Japanese guitars imported in by Gretsch during their phase of Baldwin ownership! Dorados are sometimes rightly priced between $125 to $175; but many times they are tagged at prices double that. Of course, what a guitar is tagged at and what it sells at (cash talks, baby!) are always two different animals.
It’s important to remember that these setups are not set rules that must be followed.  You can get a variety of unique sounds by placing your effects in unorthodox locations.  It’s common to run into that special sound that came about as a ‘happy accident’ when setting up your effects.  Using these suggestions, you can build up your own pedalboard to suit your individual taste.

Charlie Christian and Django Reinhardt are generally held to have initiated the use of the guitar to play melodies and improvisations over other instruments, the former using an early form of amplification, the latter playing forcefully on an acoustic guitar. Over the years, jazz guitarists have been able to solo in standard jazz idioms, such as bebop, cool jazz and so on, while in also absorbing influences from rock guitarists, such as the use of electronic effects.
Some of Jackson’s most famous models – such as the Soloist, the Kelly and the Rhoads – are a common sight on the biggest stages around the world as the biggest names in metal use them, including Randy Rhoads, Adrian Smith, Marty Friedman and David Ellefson. Thankfully it’s not just premium guitars on offer, meaning guitarists on a budget can easily pick up a quality Jackson (the Dinky Series in particular) for just a few hundred bucks.
Another tone option for a guitarist is to put a pickup out of phase with another pickup, producing a thin "inside-out" squawky kind of sound. When 2 pickups are in phase, they work together and reinforce each other. When they are out of phase the 2 pickups are working against one another and the resulting sound is the "leftovers" from these cancelations. The closer the 2 pickups are, the greater the cancelations, the thinner the sound and the lesser the volume. Therefore, the neck and bridge pickups out of phase is the best choice for this type of sound.
The first edition of the Telecaster Custom was produced between 1959-1968, and featured a double-bound body. While the guitar was known as the Telecaster Custom, the decal on the headstock read “Custom Telecaster”. Later editions of the Tele Custom were popularized by Rolling Stones‘ guitarist and composer Keith Richards, featuring a Fender Wide Range humbucker in the neck position and a single-coil pickup in the bridge. The market generally refers to the guitar as the “1972 Custom”, indicating the year this model was originally released.
Likewise, the two coils of a humbucker which are wired in series can be connected in parallel. This results in a brighter sound and lower output resembling that of a single-coil pickup. Compared to coil split the sound is usually a bit fuller and the pickup's hum-cancelling properties are retained. Like coil split, wiring a humbucker in parallel requires the start and end of both coils to be accessible, which is sometimes possible with stock pickups. Unlike coil split, it also requires a DPDT switch (coil split only requires a SPDT switch).[26][28]
One of two guitar plug-ins that we’ve carried over from last year, VB-1 is one of the older plug-ins that Steinberg once sold and, along with the fantastic Model-E synth, is still available for download. As you might expect from the picture and the name, it emulates a proper bass guitar – not the easiest instrument to properly reproduce electronically.
Guitar amp modeling devices and software can reproduce various guitar-specific distortion qualities that are associated with a range of popular "stomp box" pedals and amplifiers. Amp modeling devices typically use digital signal processing to recreate the sound of plugging into analogue pedals and overdriven valve amplifiers. The most sophisticated devices allow the user to customize the simulated results of using different preamp, power-tube, speaker distortion, speaker cabinet, and microphone placement combinations. For example, a guitarist using a small amp modeling pedal could simulate the sound of plugging their electric guitar into a heavy vintage valve amplifier and a stack of 8 X 10" speaker cabinets.
A tung oil-finished rock maple neck, and a slightly more curved fretboard radius of 13.75 inches are the other small modifications to the ‘speed’ features on the MD200. However, it has a thinner bolt-on neck as compared to the MD400’s wider mahogany set neck. That said, both neck profiles remain a shallow “C” shape, and the guitars’ dramatically beveled cutaways give you ample room to reach the high notes.
The display borrows a lot of its design cues from Guitar Hero—which is probably a good thing, since so many players are already familiar with that system. Like GH, Rocksmith has vertical columns to show you which frets to hold, and the notes move toward you until they reach a line that represents the moment you're supposed to play them. However, GH's display didn't need to move since there were only five buttons. Because it has to span the entirety of an actual guitar neck, Rocksmith's display floats up and down. If you're playing primarily notes between the fourth and seventh frets, for example, it will show you just those frets on the screen, then slide up to the 10th or 11th when it's time for you to play those.
Need a portable pedalboard for fly dates? Tech 21 has the answer in the form of the Fly Rig 5: a small but perfectly functional pedalboard, powered by an auto-switching adaptor, so it can be used anywhere in the world. What you get is the equivalent of five stompboxes. The SansAmp is at the heart of the Fly Rig. Stomp on its footswitch and its six mini control knobs light up blue. You get level and drive knobs, three-band EQ and a spring reverb emulation based on the Boost RVB pedal. In front of the SansAmp, you get the Plexi section, based on Tech 21's Hot-Rod Plexi pedal. One footswitch emulates the natural overdrive and distortion of a late-60s Marshall, with sound dialled in with level, tone and drive controls. A second 'Hot' footswitch brings in up to 21dB of boost and can be used independently of the Plexi distortion. Last in the signal chain is the DLA, a delay with tap tempo. The Fly Rig 5 is an extremely functional unit that contains arguably the most essential effects - you can plug it into a guitar amp or straight into a PA or mixing desk. It's also a life-saver should your equipment go down at the last minute, as well as being the answer to the prayers of guitarists who need to travel light.
But if you never play with a tone as dark as the fully-rolled off sound, you might consider a lower-value cap. The next example is an .033μ (also know as 33n and 333), another popular choice, followed by the smaller .022μ (also know as 22n and 223), and the even smaller .01μ (also know as 10n and 103). As the cap gets smaller, the minimum tone knob settings gets less dark. As the overall range of the tone pot decreases, it may be easier to locate any desired “nooks and crannies” between the highest and lowest settings.

Small-diaphragm condenser mics, on the other hand, tend to have flatter frequency plots and a better-behaved off-axis response, giving a sound sometimes described as more focused, but they seem to be less commonly chosen by the interviewees than large-diaphragm ones. Neumann's KM84 seems to be the most regular choice of small-diaphragm condenser, and numbers John Fry and Bill Price amongst its high-profile users, while Sennheiser's MKH40 warrants a particular mention from Mike Hedges: "I started using [these mics] when I was working with the Beautiful South. I started off with two and now have more than 20. I think they were originally designed for classical recording, because they have very high gain and very low noise. This means that you can get a very clean sound. They also accept massive amounts of volume, so you can put one against a guitar amp on full and it will take it." Hedge's concern about the ability of the microphone to handle the sheer volume of some guitar amps is echoed by several of the other producers, who make a point of mentioning that they switch in a condenser's 10dB pad when recording electric guitars.
An amazing electric guitar player pack that is suitable for use by beginners. It has a mahogany body, with its fret board having been made from rosewood. The neck is also made from mahogany. Most interestingly, it comes with passive fienzo pickups, and an exclusive guitar player pack with gig bags, strap, cord, tuner, and an instructional DVD. It is well design to assist the beginner to better access the frets and practice through to perfection. Prices range from INR 12,650. Find it on the link below:

If you’re using a bunch of high gain pedals, or a lot of pedals chained together, chances are you’ll get a little bit of hum or unwanted buzzing coming from your amp. This is especially noticeable if you’re using high gain amps and guitars. If your amp is buzzing when you’re not playing anything, you might benefit from a noise gate pedal as they cut out all that unwanted noise but preserve your tone.

Fun !...so fun...I like the game it was worth waiting a couple years for it and I like the fact that even though I preordered it when I first got my xbox one to Best Buy they still gave me all the points for my xbox and the game so I recommend it to a friend and I'm glad that I finally got the Xbox one and the game came out to play it...IF YOU ARE A DIE HARD FAN OF HALO YOU WILL GIVE IT A 5, IF YOU ARE REALISTIC YOU WILL GO WITH A 4, NOT TOO MUCH HAS CHANGED A FEW NEW SUITS AND COLORS FOR YOUR SOLDIER, STORY IS GREAT LIKE ALWAYS, AND LIKE ALWAYS ALOT OF GRINDING ON EVERY LEVEL, IT DOES NOT BRING ANYTHING NEW ON THE 1 PLAYER SIDE,MULTIPLAYER HAS PLENTY NEW FEATURES,AS A FAN OF HALO, I MUST HAVE IT IN MY COLLECTION AND YOU MUST TOO!
Welcome to Silesia Guitars, the guitar repair shop in Shoreline that is dedicated to taking good care of your dear friend, the guitar. We are located in Shoreline, just 15 min north of downtown Seattle. Our work consists of repairs of anything from broken headstocks and  cracked guitar tops, through replacing/installing electronics and custom inlays. Just need a set up or a string change? No problem! We try to accommodate any needs, big or small. Usually, the cheaper the guitar, the more it would benefit from being professionally set up. Evaluations are free, so stop by with your guitar today and let's talk about how we can help you get the most out of it!

The roots of effects pedal usage can be traced back to early into the history of the electric guitar, but two people immediately come to mind who really pushed its usage out there:  Roger Mayer and Jimi Hendrix.  We’ve come a long way since those early days and it’s easy to be overwhelmed by the insane amount of options out there.  From good old standbys to newer boutique options, it can be a chore to know what effects pedals could be right for you.

I have my Dad's '68 Kent guitar and am looking to have it restored..any info on parts would be helpful...I think all it needs is the spring for the vibrato (whammy bar)...everything else is there...the rubber piece on the bridge looks quite worn or perhaps brittle (rightfully so). Does anyone know what this guitar is worth? It's in orange sunburst ...It's a left handed guitar

11. Yamaha THR10 ($299): Another compact yet mighty combo amp, the THR10 boasts a mid-century-modern design with a variety of onboard effects and amp emulation options. This amp uses Virtual Circuitry Modeling (TCM) technology, which creates realistic and pristine tone. When plugging in your bass or acoustic guitars, you can even bypass the modeling section. One of the most convenient functions is the ability for the amp to run on a supplied AC adaptor or battery power for ultimate portability in your individual practice scenario. And it even includes Steinberg’s Cubase AI recording software so it’s plug-and-play right out the box!
bought at a tiny store in holland, back then they said to me the guiter was already 20 years old. he was looking a new, and bought it for 1000,- dutch guildens. thats maybe...445,- euro now. thats nothing compared to the prices they ask for a vox guitar they make TODAY! thay are building guitars again and ask pricies beginning by: 2000,- euro's. I wanna know when my guitar was bild, he has a chrome plate at the back with made by japan on it too.
Keyboard players who use subwoofers for on-stage monitoring include electric organ players who use bass pedal keyboards (which go down to a low "C" which is about 33 Hz) and synth bass players who play rumbling sub-bass parts that go as low as 18 Hz. Of all of the keyboard instruments that are amplified onstage, synthesizers produce some of the lowest pitches because, unlike a traditional electric piano or electric organ which have as their lowest notes a low "A" and a low "C", respectively, a synth does not have a fixed lowest octave. A synth player can add lower octaves to a patch by pressing an "octave down" button, which can produce pitches that are at the limits of human hearing.
Hand built with the same precision as our larger guitars, just 25% smaller.  Great for travel, ideal for children struggling to get their arms around full size guitars, fantastic second guitar for the office.  Because it has a smaller box design our Travel will have a smaller sound (like any smaller guitar) but our Travel Electric with built in auto tuner allows you to plug into any amplifier or PA system giving you the same power as our full size guitars.
Which brings us to this 1985 DT-250. While it sports the tail notch, the shape is a little more sleek and diminutive than the comparable Dean ML. The lower front bout is extended to be almost symmetrical with the diagonally opposite bass wing. The treble-side lower bout is shortened, giving the whole guitar a tasteful offset-X shape… X Series. To add dimension to the shape, Fuji Gen Gakki added “crystal cuts” to the edges, basically code for angled bevels.
There is enough acoustic guitars in the world to rock it to sleep, with a peaceful feeling of spanish legends to it. On the other hand there are enough electric guitars in the world to guarantee that it will never go to sleep, because there is always an electric guitar playing somewhere in the world. Which is exciting and which also causes the prices for electric guitar amps to be lower than for the amps of acoustic guitars, while retaining the same level of quality. The Roland Micro Cube Guitar Amplifier is a tiny little angel in the form of metal and plastic combined. It is small enough to be easy to carry around and store wherever, but it is also powerful enough to attract the attention of anyone passing you in the street, sitting in the bar, or otherwise hanging out in your vicinity. With a punkish style and a punk attitude, it is the perfect little helper for any musician, beginner or otherwise.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(863) 688-4590, visibilitySalePrice=239.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114572014, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Fri Oct 12 04:15:17 PDT 2018, invMsgAvailability=, serialized=false, listPrice=239.99, isShipsInternational=false, name=dark red, storeCity=Lakeland, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Lakeland, newPrice=239.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=239.99, warranty=true, storeId=774, displayId=114572014, stickerDesc=, isOnSale=false} 239.99 USD
I have been playing Guitar and Bass for over 40 years. The items in this article not only enlightened me by explaining things that I did not even know, It helped me decide to make some changes to my current guitar, rather than spend a bunch of money on a new guitar that would probably be inferior to what I currently own. THANK YOU to the folks who furnished this information.
{ "name": "Lime Green", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Lime-Green-1500000152097.gc", "status": "backorderable", "statusText": "Back Order", "skuItemType": "New", "inventoryText": "Backordered", "inventoryKey": "out_of_stock", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152097", "shipToStore": false, "displaySku": "K47863000004000", "displayId": "1500000152097   POS #: 113861066", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000004000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-25-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/California-Redondo-Player-Acoustic-Electric-Guitar-Lime-Green/K47863000004000-00-140x140.jpg", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Lime Green", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"368856727023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
By the way, if you like older Japanese guitars, you must obtain a copy of Mr. Noguchi’s book, ’60s Bizarre Guitars (Guitar Magazine Mooks, Rittor Music). It is lusciously printed in color and, while the text is in Japanese, model names and dates are in English, so it is an invaluable reference tool, as well as a fun coffee table book. Some of the following information on specific guitars comes from this source, as well as catalogs and other research materials kindly provided by dedicated guitar fans in both the U.S. and Japan. It’s virtually impossible to reconstruct a comprehensive chronology, but we will attempt to document some broad-brush details and periods of what guitars we can, and with luck you’ll be able to search out and identify your favorite Teiscos with much greater authority. Your corrections and additions are most welcome!

Have you ever looked at a hollow or semi-hollow guitar on the wall at your local music store and wondered how the heck they get the electronics in there? The short answer: it’s do-able, but not easy. In fact, it’s widely considered to be one of the most difficult jobs in the wide world of guitar maintenance. My tech charges extra for doing electronics work in a hollow-body, and he’s definitely not the only one.

We make our Tone Bars / Ferrule Blocks (tone slugs) out of 360 brass and use them on most all of our string through custom guitars. You will notice an enhancement in sustain and beauty.  The ones sold here are not polished. Go to shawwoodshop.com to purchase slugs that are polished. Please ask any questions you might have about the Slug. I offer quantity discounts.
Before diving in, it’s also worth mentioning the “crap in, crap out” rule, which dictates that any recorded track is only going to sound as good as the guitar and amp that it captures, however good your mic or skilled your engineering. You can’t expect elevated studio technique to convert junk tone or a mediocre performance to stellar sounds in the mix; the best you can hope for is to accurately capture the sound being made by your amp, and to do so with optimum depth, dynamics, and fidelity. Of course, it’s possible that the crappy, low-grade junk tone you capture from a scuzzball rig is exactly what the recording demanded (Jack White or Dan Auerbach, anyone?), but it will usually benefit the tune to capture it as powerfully as you can!
Clarence Leonidas “Leo” Fender was established this brand in 1946. The Fender Musical Instruments Corporation (FMIC) manufactures the stringed instruments and amplifiers, such as solid-body electric guitars, including the Stratocaster and the Telecaster. This brand is the kings of hearts and getting the popularity from blues to quick rock tempo. Fender’s Precision and Jazz Bass models are now considered to be the standard to which most other electric bass guitars are measured. It’s famous for best guitars which are made ever in the history.
what cha got yourself there partner is an awsome guitar! if you dont like the headstock you should have got the exact same but with the strat headstock and their cheaper! or you could change the neck to a blank headstock and there is a guy on ebay that will print you out a vinal sticker for it or if you have the cash get a fender neck and let people think its a fender!

I'll start off by saying I am a novice guitar player. I've been playing off and on for 30 years, but more off than on. I've been playing on a hand-me-down Yamaha acoustic that was once a great guitar, but through many years of moving, poor storage and not doing anything other than the occasional set of new strings, that Yamaha just did not play well. One reason I was so off and on is that I could never get a clean sound from the Yamaha. I just thought I was not capable of learning guitar. Then, about a year ago, I tried out a friend's Fender acoustic and, after apologizing in advance for my poor playing ability, found that the same chords I struggled with on the Yamaha sounded crisp and clean on my friend's Fender, and I didn't have to make my fingers bleed
The reason why we love this guitar so much is that the top is made from koa wood. What is koa? It’s a Hawaiian wood that has a very special look to it, with an unusual grain pattern. When you have a guitar top made from koa like this, it just looks very organic and natural, so if you don’t like the plastic-fantastic style, then this is the best way to go!
"Our expertise is to customize guitars according to the specifications of our clients. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. Our 100% satisfaction guarantee allows you to buy with confidence!"
The last rating is the value, which gives you an idea of how good a purchase the guitar is for the money. You’d expect most sub-$200 guitars would give you good value for money, while guitars in the $1000 have to work harder to justify their price tags. Finally it’s worth noting that each rating is relative to its overall price. Of course a $2000 Gibson is likely to play and sound so much better than a $150 Squier, but they may both receive a rating of around 8 for features because we keep the ratings relative to the price.
Modeling pedals use a host of methods to make your guitar sound like it’s coming from a specific sound source. For example, there are many pedals out there that are designed to model the sound of classic amps. This allows you to plug your amp and pedal straight into a PA system or even a pair of headphones, while maintaining the characteristics of the amp the pedal is modeled after. This also helps you avoid having to carry your amp with you everywhere you go.
This guitar is awesome. If you are on the fence, get off and buy it. It's beautiful and sounds awesome. I'd give it 10 stars if I could. The tone is so much better than my old acoustic. All mahogany I love it. Looking forward to years of getting better with this beauty. I have zero negative to say. Had it a few months have played everyday. I hate to leave it to go to work. Wish I had all day to play it.
Tuner: If you’re new to guitars and playing music, there is absolutely NO way that you know how to recognize all the notes by ear and tune your guitar without a tuner. Even if someone tunes the guitar for you at the shop, it will get out of tune by the time you’re home, so this one’s an absolute must have. Hang on for the price until we discuss the next device.

Your guitar is a model H1213 Archtone made in 1963. Harmony did a great job of stamping model numbers and dates of manufacture on their guitars, but they often require some decoding. The F-63-HB is the date code and the two numbers, not surprisingly, indicate 1963. The “F” preceding the year was often thought to be a fall production indicator while the other letter stamp they would use was an “S,” which researchers thought stood for a spring production instrument. However, a former Harmony employee notified a Harmony database website that it is more likely an “F” stands for “first” and “S” stands for “second.” He explained that Harmony would shut the factory down for two weeks in July and that guitars produced before this break were stamped “F,” while guitars produced after were stamped “S.” The H1213 is the model number as indicated in Harmony’s catalogs and literature. The “3714” is the serial number of your guitar, but little information has been uncovered as to what this series of numbers represents. More than likely, it was a consecutive production number of that particular model for either the first or second half of the year.

Jim Root: Featuring mahogany body, maple Modern C shaped neck, ebony fretboard in Flat Black finish, maple in Flat White, 22 Jumbo frets, EMG pickups, EMG 81 in bridge position, EMG 60 in neck position, strings-through-body hardtail bridge, locking tuners, 3-way switch, single volume knob and large headstock.[18] Along with his Jim Root Telecaster, it is the only Fender guitar equipped with EMG pickups as standard.

In this article you will learn the basics of guitar effects pedals so you will be better prepared to choose the right analog stomp boxes and digital effects to complement your sound. I’m not going to spend too much time on the science of how effects boxes do what they do. But I will do my best to explain, in plain English, the basics of each effect.

The 2019 Gibson Les Paul Standard sports a mahogany back with an artisan-grade AAA figured maple top and a mahogany neck with Ultra-Modern weight relief. This chambering technique is provides a solid core through the center of the guitar, retaining the classic Les Paul sound and making the guitar less prone to feedback. The Ultra Modern weight-relieved body also makes playing long sets a breeze. The neck has an asymmetrical Slim Taper neck profile for increased playability and comfort.

Transistors are related to crystals. Their individual function is non linear and have to be arranged in compound groups to behave as a linear circuit. Solid-state amps operate at low voltages (10 - 100V). Valves amps operate at high voltages (200 - 600V). Speakers operate at approx (0 - 40V). The Output Transformer converts the high operating voltages of valves to the lower operating voltage of speakers. A transformer has 2 separate coils of wire (primary and secondary) wound around an iron core. Electricity flowing through wire causes a magnetic field around the wire and visa versa, a changing magnetic field causes electricity to flow through wire.

The volume knob can act as a boost which can take your guitar from clean sounds for rhythm playing to dirty overdrive tones for soloing. When playing a song keep your volume knob at 6 or 7 when playing chords or verse parts and when it’s time to deliver a rockin’ solo roll up the volume to 10 and you will not only hear a boost of gain (overdrive) but also a volume lift over any other instruments in the song.

The original flanger effect was produced back in the 1960’s by recording to two tape deck simultaneously and mixing the result. As they were recording, an audio engineer would lightly touching the flange of one the reels of tape. When it played back, it created a swooshing effect similar to what you hear when a jet airplane takes off. Stomp boxes use a delay effect to create a similar sound.

Compared with many of the guitar models on this list that have been around for half a century, the Ibanez Artcore AF75 is still a baby. Ibanez introduced its Artcore line of semi and full hollow body electric guitars only in 2002. Nevertheless, the Artcore guitars have amassed a massive fan base because of their tuning stability, rich tone, impressive sustain and overall quality. Plus, they’re also extremely affordable considering their features.

This aim of this site is to provide high quality SoundFonts (virtual musical instruments in sf2 format) that can be played using a midi keyboard connected to a computer, tablet or smart phone. Emphasis has been placed on real or acoustic instruments particularly piano and other favourites for keyboard players (pads, strings, electric pianos, organs and orchestral) but some SoundFonts here also include high quality guitars, some synths and ethnic instruments. There is also a nice GM set for playing general midi files. The SoundFont format sf2 is widely supported by lots of programs/apps and devices.

I don't have enough good things to say about this shop.  Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings?  Well, this ain't that shop.  James, the owner,  is super helpful and knowledgeable, and stocks his shop with really top quality gear.  I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection).  That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well.  

Epiphone's passion has always been about more than just making guitars. It has been about making music. It has been about understanding what is inside every musican that makes them want to, have to, express themselves. And understanding the myriad musical styles, where they are going and how they might develop. For over one hundred and twenty-five years they have continually looked for new and better ways to help players take their music farther.
With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.
This mod works great for Strat-type pickups or aftermarket Tele-style reproduction pickups that don’t already have a plate. Some pickup companies make P-90s that don’t have a metal base plate, and these can be twang-ified in this way, too. The best part is that, if you don’t like the sound, you can just peel the plate off and be right back where you started.
Since 1971 Hoffman Guitars has provided a full range of services to guitar players nationwide.   We have always worked to provide the finest in instrument repair services and handcrafted guitars.  We provide a full range of repair services, including factory authorized warranty service for C.F. Martin, Gibson, Guild, Fender, Taylor, Jim Olson and others.  I (Charlie Hoffman) have built over 600 individually handcrafted guitars, which are (or have been) played by such players as Leo Kottke, Tim Sparks,  Dakota Dave Hull, Ann Reed, Jerry Rau, Charlie Maguire and others.  In addition, we carry a fairly complete range of accessories for guitar players (strings, picks, capos, pickups, cases, etc, etc.).  In this day and age it may seem a bit anachronistic but we really believe in customer service and strive to provide the very best.

{"eVar4":"outlet: guitars","eVar5":"outlet: guitars: electric guitars","pageName":"[gc] outlet: guitars: electric guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"outlet","prop2":"[gc] outlet: guitars: electric guitars","prop1":"[gc] outlet: guitars","evar51":"default: united states","prop10":"category","prop11":"extended range electric guitars","prop5":"[gc] outlet: guitars: electric guitars","prop6":"[gc] outlet: guitars: electric guitars","prop3":"[gc] outlet: guitars: electric guitars","prop4":"[gc] outlet: guitars: electric guitars","channel":"[gc] outlet","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] outlet"}

This open-C tuning gives the initial harmonic series when a C-string is struck.[4] The C-C-G-C-E-G tuning uses the harmonic sequence (overtones) of the note C. When an open-note C-string is struck, its harmonic sequence begins with the notes (C,C,G,C,E,G,B♭,C).[3][4] This overtone-series tuning was modified by Mick Ralphs, who used a high C rather than the high G for "Can't Get Enough" on Bad Company. Ralphs said, "It needs the open C to have that ring," and "it never really sounds right in standard tuning".[5]

It is possible to perform a setup at home, but it can easily become a laborious and time-consuming process. You can instead bring your instrument to a local store or other professional. Guitar setup cost is usually a large value in comparison to the work it would take to do the job at home. You should consider that the cost of a guitar setup includes the addition of new strings but may not cover the actual cost of them. Whether or not strings are included in the price is something that should be investigated prior to having an instrument professionally setup. Guitar setup cost may also increase if the tuning keys need adjustment, or if you have a complicated bridge system (like a Floyd Rose) that requires extra knowledge and skill to be properly fine-tuned.
The other guitarish plugins that contribute to the best most real guitar VST include amp emulators to get that warm, liquid sound of tube amps, along with VSTs for almost any other effect ever hauled on stage. Those amp-and-effects VSTs might be used by actual guitarists as well, in various straight-to-computer workflow setups - either through a DAW host or otherwise maybe straight through some standalone VSTs to amp, headphones, recording device or onboard speakers.
This is by and large the most common body type, and includes some of the most iconic axes ever made, like the Gibson Les Paul and Fender Statocaster. Solid-body guitars simply are capable of the widest range of tones; their construction also allows for reduced feedback and increased sustain compared to other guitar types. This style is extremely well suited to rock and alternative, but if you really aren’t sure of what music you want to play, you’re not likely to go wrong by picking one up.
The body and neck are also slimmer than other Spanish guitar models, as well, so if you’re used to a steel-string, but gearing up to try a classical guitar, the Kremona Sofia is one to put on your list to try. The strings are Royal Classic Sonata strings, made in Spain, so add this to the guitar body’s manufacturing origins, and you will have a sound that is worthy of a professional, but affordable for just about everyone.
Jump up ^ "Now the Gibson Guitar Raids Make Sense". www.investors.com. Investors' Business Daily. May 23, 2013. Retrieved July 14, 2018. According to C.F. Martin's catalog, several of their guitars contain 'East Indian Rosewood,' which is the exact same wood in at least 10 of Gibson's guitars. So why were they not raided and their inventory of foreign wood seized? Grossly underreported at the time was the fact that Gibson's chief executive, Henry Juszkiewicz, contributed to Republican politicians...By contrast, Chris Martin IV, the Martin & Co. CEO, is a long-time Democratic supporter.
Flamenco technique, in the performance of the rasgueado also uses the upstroke of the four fingers and the downstroke of the thumb: the string is hit not only with the inner, fleshy side of the fingertip but also with the outer, fingernail side. This was also used in a technique of the vihuela called dedillo[40] which has recently begun to be introduced on the classical guitar.

I played a gig (to an empty house) at The Haunt in Ithaca NY. A lot of up and coming regional bands play there. We, on the other hand are just a cover band from Binghamton, about an hour away. While setting up, the sound man left a mic on the floor where I’d be setting up. I let him know that I send a direct signal. I could tell he wasn’t happy. After the gig though, he came and complimented me on my sound, saying that he didn’t expect a direct sound to be that good.

It has been said that Barney never played his signature Kays. On the contrary... Barney Kessel has been photographed in concert with the Kay K8700 Jazz Special on multiple occasions, has made appearances at Waldo's Jazz Club on the television classic "Johnny Staccato - Television's Jazz Detective" and has been confirmed by son Dan (who also recorded with the Artist on several famous recordings) to have used the Artist to record countless rock, pop, r&b and blues hits with the most popular performers of the early '60s.
Dexter Holland (b. 1965) is the rhythm guitarist of punk rock band The Offspring and has played Ibanez guitars for most of the band's existence. He currently uses a custom diamond plate RG with a custom Jägermeister logo on the twelfth fret, as well as DiMarzio Super Distortion pickups, though he used to use a brown and green custom RG and has been seen with a custom Purple RG.
With $500 in your pocket, buying a good amp becomes a lot easier. In fact, it’s probably as expensive as most casual guitarists would ever need to go. This category includes a big choice of both amp heads and combos, solid-state and tube amps. While they make great practice amps, they are all worthy of small to medium-sized gigs and studio recording. For example, you can find the excellent Peavey ValveKing II. This little amp head offers the same beastly tone as the iconic full-size 6505, with 20 watts of power and solid controls.
Rosewood » The diminishing supply of Brazilian Rosewood has led to Indian Rosewood replacing it in most markets. While the two look different, the tonal quality is virtually the same. One of the most popular and traditional woods used on acoustic guitars, rosewood has been prized for its rich, complex overtones that remain distinct even during bass-heavy passages. It's cutting attack and ringing tones make for highly articulate sound and plenty of projection. Rosewood is also a popular choice for fingerboards and bridges.

Heres a few no one has brought up … very under rated or possibly not well enough known …. Jeff Beck , Steve Vai , BucketHead , Ry Cooder , Eric Johnson ,Gary Moore , Ritchie Blackmore , Andy Summers ,John Petrucci ,Vivian Campbell , Paul Gilbert , Uli John Roth ,Robert Fripp ,Akira Takasaki ,Steve Howe ,MICHAEL ANGELO BATIO ,CHRIS IMPELLITTERI ,ZAKK WYLDE , Vinnie Vincent , Stevie Stevens , and my choice for best overall would definetely be Randy Rhoads…
A question which causes much thought and divide! Catch 22 to a degree: you can't play songs till you've learnt some chords, but just knowing some chords will mean you actually can (though you are not aware of it) play loads of songs. There is a plethora of songs out there with only three chords (some with only two!). Their differences are that the order of chords is slightly different for each - with the exception of the thousands of 12-bar tunes!
The ADA MP-1 was a legend for it’s superior versatility at the time of it’s release. Since first becoming available during the 80’s, players vied after it for it’s midi switching capability via footswitch. Paul Gilbert is most famous for his loyalty to the amp during the spawn of his career.  It runs on two 12AX7 preamp tubes and has three main voicings — Solid State, Clean and Distortion. One downfall of this amp stems from it’s lack of an input volume control, but thanks to a host of mods available nowadays for this thing, one can look really look past this minor flaw. On top of that, you can find them used for around $250! A steal for 80’s tone-in-a-box.
I want to focus on acoustic guitar but some electric is alright. Mainly I want to build up a repertoire of songs that MOST people will know if heard and be able to sing a long. Currently I know very few songs such as this but I have been playing off and on for years. Any really popular (old or newish is fine) songs that are not impossible to play would be great. Thanks!
The Website attempts to display product images shown on the Website as accurately as possible. However, The Top Guitars cannot guarantee that the image or color you see displayed on your monitor represents the actual product or conforms to the specifications of the product you have selected. If you have any questions about product appearance/specifications, please contact us before placing your order. The Website does not contain images of each offered item because some of them are Custom and not built and/or modified yet.
A tabletop unit is a type of multi-effects device that sits on a desk and is controlled manually. One such example is the Pod guitar amplifier modeler. Digital effects designed for DJs are often sold in tabletop models, so that the units can be placed alongside a DJ mixer, turntables and CD scratching gear.[17] For a DJ, a pedal located on the floor would not be practical because she/he would find it hard to adjust the knobs.
Im sure are techs at these stores that aren't bad AT ALL, but when you don't know who they are, I wouldn't trust them with a truss rod while you're not there standing over trheir shoulder watching them. I may just be paranoid, but hey, better safe than sorry is the way I look at it. I've done my own setups. And I plan to keep doing it until the day comes when I order myself a custom bass that I worked my ass off for, then I'll be willing to spend $50 on a 'properly' done setup. I dunno

The neck is also made of mahogany and is hand set into the body. Looking at the fretboard, we see a standard rosewood design with white binding and classic trapezoid inlays. Epiphone went with a set of Alnico Classic humbucker pickups. These are very close to what the original Gibson solution had to offer. Classic rock and blues just flow out of these, although you are more than free to crank up the gain and blast some heavy riffs.

Shop Hourly Rate is $60.00 per hour. Since each guitar is unique, prices quoted are estimates and may be adjusted based on actual time involved. A final price will be submitted prior to actual work and price may need to be adjusted in the case of repairs that get more involved as the work progresses. (Please see the article on the 1975 Gibson Hummingbird for a good example of this.)
There you go! That's the way to go about it. Now keep practicing till you get perfect. I am sure you would get these bass guitar tabs for beginners in few attempts. These were some of the best guitar tabs for beginners. There are some best acoustic guitars for beginners that you can select among the different types of guitars. Buy the best guitar, so that you do not come across any problems later on. You could also purchase some guitar tab software and practice the notations. There are many musical sites that provide you with free guitar tabs and tutorials, that you can refer to. They may also help you get a broader view on how to play guitar tabs. Learning any instrument is fun and helps you overcome fatigue, thus rejuvenating your power and mood. You can definitely trust me on that!
I don't have enough good things to say about this shop.  Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings?  Well, this ain't that shop.  James, the owner,  is super helpful and knowledgeable, and stocks his shop with really top quality gear.  I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection).  That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well.  

Leo Fender’s simple and modular design was geared to mass production, and made servicing broken guitars easier. Guitars were not constructed individually, as in traditional luthiery. Rather, components were produced quickly and inexpensively in quantity and assembled into a guitar on an assembly line. The bodies were bandsawn and routed from slabs, rather than hand-carved individually, as with other guitars made at the time, such as Gibsons. Fender did not use the traditional glued-in neck, but rather a bolt-on. This not only made production easier, but allowed the neck to be quickly removed and serviced, or replaced entirely. In addition, the classic Telecaster neck was fashioned from a single piece of maple without a separate fingerboard, and the frets were slid directly into the side of the maple surface—a highly unorthodox approach in its day (guitars traditionally featured rosewood or ebonyfingerboards glued onto mahogany necks). The electronics were easily accessed for repair or replacement through a removable control plate, a great advantage over typical construction, in which the electronics could only be accessed through the soundholes in the case of hollow-body instruments, or by taking off the pickguard after removing the strings (in a design popularized by Fender’s own later guitar model, the Stratocaster).
@Ricardo – I recommend placing tuners as close to your original signal as possible at the beginning of your signal chain. An EQ pedal can be placed where you would like to filter your signal to the settings of the EQ which is technically at any point in your signal chain. Try the EQ in different locations and use the setting that works best for your.
Although fairly small in size, this packs a serious punch thanks to the overdrive control which can produce that classic orange crunch to smooth and creamy British distortion. The Orange Crush 12 is definitely a great small gig and rehearsal amp, but it also makes a fantastic amplifier for practice at home thanks to the headphone/line output which features the Orange CabSim technology. This allows you to plug your headphones in and enjoy a faithfully emulated sound of a mic’d Orange 4×12" cabinet directly to your headphones – ideal for silent practice. This can also be used in conjunction with your audio interface for direct recording and the capturing of authentic Orange tones without dragging a massive cabinet into a room (or destroying your windows!).
This will only matter to some players (I’m looking at you, lefties), but if you happen to play guitar the non-traditional way (strumming with your left hand and fingering with your right) you may want to pay close attention to brand. Because left handed players are in the minority by a long shot, it can be difficult to find quality guitars of that orientation. If you are on the market for a left handed guitar, you may want to stick to Fender or Epiphone, as they are known to produce quality offerings in that category.
Another advantage of an Apple Macintosh computer is that they come with a much better built-in sound card than those of almost any brand of Windows PC. You can actually use the headphone audio output of any model of Apple Macintosh without needing a professional audio internal or external audio interface and get acceptable results. Of course, if you do in fact want the highest-quality audio output, especially for multiple channels, you would want to purchase a third-party external audio interface.
Smaller players, musicians who travel frequently, and parents shopping for children, may also want to consider travel and mini-acoustic guitars. These guitars were designed for the comfort of smaller players, and for convenience when traveling, but many guitar manufacturers have invested significant time and resources into creating smaller-scale acoustic guitars that don't compromise quality or sound.
Still in the ’64 line was the MJ-2L, pretty much unchanged, except for the new hooked headstock in later ’64. Given the evidence of Westheimer’s Kingstons, the MJ-1 and MJ-2 were probably still available. The BS-101 solidbody bass also remained, with the new, hooked three-and-one headstock. Also still in the line were the WGs, including the WG-2L, WG-3L and WG-4L. Many of these are found with the squarish Bizarro Strat head well into ’65, but they are also pictured in the ’64-65 catalog with the new, hooked four-and-two head, so expect to find either.

Due to the good critical response received, the ATH-M50x can be considered the flagship of Audio-Technica headphones, and it definitely doesn’t disappoint. It’s clearly a professional product, so much so in fact that philistines who dare compare it to models directed at casual entertainment get verbal beat downs in comment sections from its many fans.
Position 4 (inner coils, parallel connection): This is similar to position two just inverted. Pole 1 connects bridge pickup coil tap to the output through pole 2. Pole 3 grounds neck pickup coil tap and pole 4 connects neck pickup hot lead to the output. That leaves us with bridge pickup coil from ground to coil tap and neck pickup coil from coil tap to hot lead. Again, they are paralleled.

I always recommend the Cordoba C5 for beginners who are looking for their first classical or nylon string guitar. It’s comes at a very wallet-friendly price, but it sounds and plays exceptionally well for a guitar in its price range. More experienced players can look to other C-Series Cordoba guitars like the C12, which is built for advanced guitarists.

Perhaps our favorite feature is a far more subtle aspect of this pedal's interior, which is a circuit design that runs your dry signal through an analog path, before reuniting it with the wet reverb signal, which is produced by a digital processor. This means your guitar's signal coming into the pedal is unimpaired by the digital components, giving you a far more pure and organic-sounding output. 
FWIW: I have the same guitar, and it is around the same vintage as yours, with a 4 digit serial number and the headstock truss-rod adjustment. As you can see from the response from SLM, the headstock truss-rod adjustment was on the earliest Alvarez guitars. I have another Alvarez from 1981-2, that adjusts in the sound-hole. You'll see a lot of people claiming that they have, or are selling, 70's vintage Alvarez guitars, but have sound-hole truss-rod setup. To me, that's the first indicator that a guitar might be post 1980'ish. And actually, due to the neck attachment issues, I gravitate towards the 80's vintage, as they have had less time to have their neck angle change from string tension.
There were differences between the pickups as well – the National had slanted units under enormous covers, while the Supro featured 8-string versions of the Alnico V pickups found on many Spanish-style guitars. The difference in tone proved to be minimal. The Supro has a more refined sound than its cheaper cousins with the famous string-through pickup, but it can still be raw and biting when required. Although it is a single-coil pickup, it has excellent hum rejection and sounds wonderful either overdriven or clean. The guitar has plenty of sustain and a surprising level of output, making it an excellent instrument for rock and roll as well as country music.
The coolness in ’38, however, lay in two lap/amp combinations, the Supro 60 Electric Combination and the Portable Supro 70 Electric Combination. Both featured the little pearloid Supro Electric Hawaiian Guitar tucked into an amp-in-case! The Supro 60 featured a rectangular case with an 8-tube amp and 4″ speaker. This amp had to be plugged in, but was definitely boss. The combo cost $60. The Portable Supro 70 combination featured the same amp but operated with batteries (“…available at any radio supply house”). Most folks are conversant with Nat Daniel’s amp-in-cases from the early ’60s, but the idea was actually developed a good 25 years earlier. Actually, Daniel may have invented the first amp-in-case in 1936, with the amps he made for the first Epiphone Electar C steel guitars. These apparently had an amp built into the case, however, they were quickly replaced with a separate Model C amplifier. There’s no evidence that the Supro was a copy of the earlier Epiphone, but the idea was clearly around at the time.
Here we have a Faithful Recreation of the classic Martin D-18 that was well crafted in Japan over 33 years ago. This is an excellent vintage Japanese guitar as it has been well taken care of all these years And has spent its years in California in the perfect climate to preserve the guitars original structural and cosmetic integrity its fit and finish to this day is still JVG rated at very good to excellent with no cracks or finish checking none – clean and still shines like glass….. its 1-11/16ths at the nut neck is a nice comfortable medium slim profile, neck is straight with correct amount of slight relief, action is good medium low and plays with ease and sound is clear and volume is good, tone is vintage sweet from its Aged tone woods. This is a true Lawsuit model as it has the direct image shape & size of the vintage Martin it copies is is a very cool D-18 guitar, its 33 years it’s obviously not new or mint but is surely vintage beautiful with its age and genuine warmth & patina and yes a few minor doinks but nothing to detract from its overall appeal. .
Some single cabinets use mixed speaker sizes, although this is less common. Examples include MESA Engineering's 1x15"/4x10" cabinet,[8] Peavey's PVH 1516, which has 1x15" and 2x8" speakers.[9] and Traynor's TC1510 combo, which has 1x15" and 2x10". Other large single cabinets with speaker sizes other than 10", 12" or 15" are less commonly used, but they do exist. Examples include the 6x8" and 8x8" cab configurations. Users of two cabinets may use two 4x10" cabinets (more easy to transport than a single 8x10" cab), a 15" cab and a 2x10" cab, or other variations (e.g., a 2x15" cab and a 4x10" cab).
4.) Check the guitar’s string height by pressing down on the first, second, and third fret. You should be able to do so with minimal effort. Come to the 12th fret and press down. The distance from the top of fret to the bottom of the string should be no more than three times. If it is five times, the guitar may have a warped neck or too high of a bridge.
You can always rely on Epiphone to provide an acoustic guitar with eye-catching looks and a quality sound at an excellent price, and the EJ-200CE is certainly a testament to this. Based on one of the world’s most famous guitars, the J-200 (introduced in 1937), this revamped model offers an excellent mix of vintage style and modern components, perfect for any level of skill.
The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.

In general, this measurement is taken by measuring the distance between the bottom of the string and the top of the 6th fret while holding the string down at the 12th fret and the first fret. This is where the capo comes in handy - put it on the first fret so your hand is free to take the measurement. Using a feeler gauge of the desired height, in this example, 0.010, hold the low E string down at the 12th fret (with the capo on the first fret), and measure the distance between the top of the 6th fret and the bottom of the low E string. If the distance is greater than the desired relief, then you need to turn the truss rod clockwise (towards your right) as you're looking down the headstock towards the body of the guitar. If the distance is less than the desired amount, then you need to turn the truss rod counter-clockwise (towards your left) as you're looking down the headstock towards the body of the guitar. The basic rule is:

If you are considering a traveler or mini guitar, be sure to read reviews of people who own models that range between $40 - $500, because you will find various reasons to stay away from some of the cheaper models that are under$150.  Some of these guitars that are made that cheaply are not much better than toys in quality, sound and crafstmanship, and at this model and price range, you will get what you pay for.  By investing an extra $100 - $200, you can find some fine travelers and minis that will more than accomplish the job, and in fact, some professionals choose certain travelers and minis over others for playability, quality, performance and recording reasons.
In August 2014 Vox released two Night Train limited editions, both of which were cosmetic updates to the NT2H set and the NT15C1 combo respectively, that recall a more traditional Vox aesthetic. For the Lil' Night Train NT2H-GD-SET, Vox supplied the NT2H head with a matte gold coloured tube cage and black control knobs, and then covered its V110NT cab with a retro-traditional “Brown Diamond“ grille cloth and basket weave covering (since there was no "G2" version of the Lil Night Train, this limited edition NT2H seems to mark the end of the line for this model as Vox makes no further reference to it). For the NT15C1-CL (Classic) combo amp Vox applied a similar treatment with the installation of a gold logo badge and trim on the front of the NT15C1 combo as well as adding the “Brown Diamond“ grille cloth.
This is obviously the most important value when it comes to any musical instrument. If the guitar doesn’t sound right, none of the other values will be able to make up for that. Guitarists are notorious for their attention to tone, and many players will form a tight allegiance to the brand they feel provides the perfect sound. The Gibson is sought after for its full bodied overdriven sound in rock circles, while others swear by Fender’s classic offerings. It all comes down to a matter of preference, so you will want to be well acquainted with the sounds of each brand. Look up your favorite guitarists and see what they play. That will likely put you on the right track.
Jeff Beck: select alder body with a thinner C-shaped maple neck, contoured neck heel, rosewood fretboard with 22 medium-jumbo frets, three dual-coil Ceramic Vintage Noiseless pickups with 5-way switching, LSR Roller Nut, Schaller locking tuners and an American 2-point synchronized tremolo with stainless steel saddles. Available in Olympic White and Surf Green finishes (Artist Series, Custom Artist), as well as a “Custom Thinskin Nitro” version with a “Thinskin” nitrocellulose lacquer finish.
Most of the time, you’ll almost always see a piezo pickup on an acoustic electric guitar with the addition of an on-board preamp. Typically, it will be installed underneath and in contact with the saddle on the bridge of the guitar where it can effectively pick up vibration energy. This specific type of device is called an active undersaddle transducer. This type of pickup is often paired with other pickups and microphones to provide versatility for sound options, and to produce a richer, more organic and natural sound. A piezo pickup and other types of electronic pickups are what we call active pickups.
I have achieved my best results with this technique when miking resonant hollow-body guitars, getting the mic in as close as possible to the guitarist's picking hand. Large-diaphragm condensers, especially the Neumann U 87 and Manley Cardioid Reference tube mic, have proven superlative performers on big-box guitars such as the Gibson ES-175 (see photo on p. 114). The small-diaphragm Oktava MC 012 and medium-diaphragm Shure KSM32 have worked wonders on solid-body instruments, most notably on improvisational-guitarist Ron Thompson's seven-string custom axe.
From 1959 to 1967, the Stratocaster was made with a rosewood fretboard as standard, as well as color choices other than sunburst, including a variety of colorful car-like paint jobs that appealed to the nascent surfer and hot-rod culture, pioneered by such bands as the Surfaris,the Ventures and the Beach Boys. Fender would paint any guitar from the DuPont car color range for 5% over purchase price.

Playability and tone are two of its most commended traits. Many describe its neck as very easy on the hands, while others describe the overall playing experience to be better than their other acoustic guitars. The TK-40D preamp gets a lot of nod from users who want to fine tune their amplified sound, while there are also many who are satisfied with its acoustic sound.
Mostly everything about a guitar in this price range feels premium, and the sound quality and playability is enough to put a smile on any guitarist’s face. You also start to find advanced features such as brand-name pickups, active pickups, and EverTune bridges, as well as unique signature models that are too expensive for manufacturers to produce as a budget line.
I have a 12-string Lyle in really good shape. Bought as a b-day present from me back in late 1970's from a pawn shop. I need to take it to a luthier to have it set up better, but it sounds really good. Just right now the action is a little high, but not that much wear. For a long time, I put it away, finding it hard to chord as a relative newbie back then. But now, I am more than ready. It does say it was made in Korea ~ which makes it seem a little more rare. The sound is still great or maybe even better! Wish I knew what it was worth, but I hope the guy I find to set it up will know more.
Rule 1—There are no rules. The sound you’re after might not be made by what we could call the appropriate or logical signal path, but that’s not always the issue. The issue is this: what does it sound like? If it makes the sound you’re after, then it’s right…although, you may have to do something about the noise. Traditional pedal board arrangements were designed for certain reasons, and keeping the noise down is one biggie. Following the principles of how sound is made in physical space is another (see Rule 4 coming up). But the final choice is yours. As a very wise man said: if it works, don’t fix it.
One glance at this bad boy reveals just how accurate it is to the 1959 version. We are talking exact same tubeless truss rod assembly, aniline dye, exact same finish... everything. In terms of hardware, they went with a set of Klauson Deluxe tuners and period specific Tune-o-Matic bridge. The custom humbuckers were coiled and voiced to perfectly match the original PAF design from the late '50s which was done using Alnico III magnets and 42 AWG wire. The performance of this guitar is an experience that is rarely found out there.
A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:
In the early 1970s, Southland Musical Merchandise Corporation apparently acquired the Kent name and shifted manufacturing to Korea. The font for the logo changed and emphasis was placed on lower prices with a higher profit margin at the expense of quality. Most of those guitars were knock-offs of Gibson Les Pauls and ES-335s and Fender Stratocasters. I'm not watching those.
While Gretsch is known for semi-hollow and full hollow body guitars, and it is only fitting that one of their semi-hollow chambered body models make this list, specifically the Gretsch Electromatic Pro Jet Bigsby. Being part of their Electromatic line, brings with it all the Gretsch goodness minus the premium appointments, at a very accessible price point. It is a true archtop thinline guitar, that passed the same attention to quality and detail that more expensive Gretsch guitars also go through.
I have to say I'm an Impact Soundworks fan. I haven't listened to the Archtop demos, but another one from them is Django Gypsy Jazz Guitar. The sound is stunning to me, both lead and rhythm. However, it depends on what style you're going for. It's not going to be as versatile as some other acoustic options, but what it does it does very well. I don't have it but it's on my buy list. I own Shreddage II SRP and it's my favorite electric because of the interface and playability.
I am sorry to hear this, Andrew. Rear shifted bracing should help protect against the kind of top bulges normally seen behind the bridge. Unfortunately, when it comes to guitars made by hand out of organic materials like thin, solid wood, some pieces of wood will misbehave. The old saying is a guitar takes about two years before the wood stops trying to turn back into a tree.

Even cheaper (abour $40) is the Behringer Guitar Link (review: Behringer Guitar Link UCG102 USB Interface Review). One nice thing is the long cord.. you can sit a ways away from your PC without needing an extender, and like the line 6, it’s also got a headphone output. They offer some guitar effects software as well, via download, and a basic DAW program. Worth checking out, as this does check every basic box for forty bucks. I have not used this, but I have used other Behringer audio interfaces. Cheap, basic, but they do include ASIO drivers (read ahead).

{"pageName":"[gc] pdp: ibanez s421 s series solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114572014;;;;evar65=Used-Guitars-Ibanez","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
Just bought a Martin D-18GE beautiful sunburst from Franklin Guitar today and was absolutely blown away by the hospitality, friendly atmosphere and knowledge I was met with. I've never written a revie...w before but this place is so good it deserves praise and recognition! I would recommend anyone who wants to buy any level of guitar with all ranges of experience to go check out Franklin Guitar! From beginners to professionals, this little place has what your looking for and will no doubt be a joyful experience. Thanks Pat! See More
There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.

This acoustic-electric parlor style guitar features a solid cedar top and solid sapele back and sides, premium appointments that other builders will require you to pay top dollars for. And it features old school parlor style body shape, which gives the instrument a vintage appeal, and blues box style tone with emphasis on the middle frequencies. This makes it ideal for blues, folk and old school comping, a good contrast to regular sized acoustics in a mix.
-Would be nice to edit the string colors, add training modes telling you which finger to hit the note with, how many times to play through a sequence (so you learn/memorize the song, vs just respond to the game - i.e is the chorus sequence repeated 4 times before moving onto the next part of the song?),indicating strumming patterns to help with timing (newbies tend to down pick everything and just pick faster when the notes are closer vs switching to an up-down strum) etc.
Those items considered -- performance notation and computational capacity for emulation of stringed instrument sounds otherwise reinforced by the same speaker systems that amplify synthesized sounds -- the other significant factors in the realism matrix involve economics of VST production, listener preferences and, least we forget, performer or producer preferences.

Let’s start off with a guitar’s signal. As the driving force behind the entire effects chain, a guitar’s signal (more importantly, it’s voltage) must travel through the input cables and all of your effects pedals before it can reach the amp. As you can imagine, by the time a guitar’s signal finishes making its way all the way to the amp, the signal will undoubtedly suffer from a bit of degradation, losing its tone and body in the process. It's not your guitar's fault, it's simply the nature of electricity.
Combo amplifiers are the most popular type of guitar amplification these days. While amp heads are the source of incredible power, it is the versatility, convenience and simplicity of combos that makes them the go-to choice for so many – from beginner to seasoned pro. Combos come in a variety of flavors in all price ranges. While the practice amp and budget markets are awash with combos, there are also some epic premium models such as the Fender ’65 Princeton Reverb, which is a revamp of one of the most epic tube combo amps ever made. .
It’s hard to look beyond the original and classic Gibson J-45 when it comes to recommending this particular shape. Players love the J-45 on account of its sweet, warm tone with beautiful singing high notes and defined mid range. Upon release it quickly acquired the moniker ‘the workhorse’ on account of its durability and guarantee of quality. Nothing that’s happened since has diminished that.
Some Craigslist and EBay sellers have been claiming the 500 and 600-series Kents are made by Teisco. I think we’ve shown that that’s not the case. Some sellers also describe those early Kents as having “Ry Cooder” pickups. As most of you know, Ry Cooder is an incredibly talented multi-stringed-instrument musician. David Lindley, another great talent, gave him a pickup from an old Teisco guitar. The photo at left is exactly like it. Cooder put the pickup into one of his Stratocasters and liked the sound so much that he got another one and put it into another Strat. These pickups are also described as “gold foil” pickups. There are variations in the pattern of cut-outs on the chrome covers of different pickups. I don’t know if the others sound any different, but if I were looking for a “Ry Cooder Pickup”, something like the one pictured here is what I would be looking for. The pickups have become worth more than the guitars they are on, consequently, as the guitars are bought up and trashed for their pickups, their prices are going to rise.
No guitar recommendation list is ever complete without a Fender product in the mix. Squier is Fender’s more affordable instrument range, and this set is a great place to start. The affinity series Stratocaster is available in sunburst, classic black, or candy apple red. A 10 watt Fender amp and corresponding cable are also included alongside a strap, 3 picks, snap on the tuner, tremolo bar, replacement parts and tools, strings, gig bag, and an instructional DVD to help you get off on the right foot with your playing.
The Effect: Loop pedals essentially operate as recorders that have the ability to infinitely spin the recorded bits and possibly alternate them in a variety of ways. The main function of any looper is to be able to record a musical part, and then automatically put it on loop until ordered not to do so anymore. Depending on the complexity of the pedal, loopers can offer multiple layers, overdubs, as well as options of recording more than a single instrument. They range from simple single-switch stompboxes all the way to powerhouse loop workstations. Check out our full reviews to see which one is your perfect match. If you are looking for the quick winner, the Boss RC 3 is a great contender.
In 1950 and 1951, electronics and instrument amplifier maker Leo Fender through his company, designed the first commercially successful solid-body electric guitar with a single magnetic pickup, which was initially named the "Esquire". The two-pickup version of the Esquire was called the "Broadcaster". The bolt-on neck was consistent with Leo Fender's belief that the instrument design should be modular to allow cost-effective and consistent manufacture and assembly, as well as simple repair or replacement. The Broadcaster name was changed to Telecaster because of a legal dispute over the name.
When Leo and the boys at the big “F” ranch developed the Tele, they put a big slab of steel under the bridge-pickup coil. This reflected the magnetic field up and toward the strings. In the words of Seymour Duncan’s Evan Skopp, this gives it more “crack”—which, if you’re addicted to twang, is a good thing. The better news is that you can attach a plate (sometimes called an elevator plate, because of how it elevates the magnetic field toward the strings) to any single coil whose pole-piece magnets are exposed at the back.

OCTAVACIÓN (FAT20) Cada una de las silletas está provista de un tornillo de bloqueo para impedir todo movimiento. Para ajustar la octavación, afloje el tornillo de bloqueo de la silleta con una llave Allen de 2 mm. (D) Para ajustar la octavación, introduzca una llave Allen de 2,5 mm en el tornillo de la silleta situado en la parte posterior del trémolo.

Like Television not too long before them, Fugazi founders Ian MacKaye and Guy Picciotto engaged in a locomotive, dub-influenced dual-guitar shouting match. Though most of the talk around Fugazi inevitably leads back to their founding ethos, that way of thinking and operating permeated the music as well: Together, MacKaye and Picciotto were anti-frontmen, playing like a living, fire-breathing, two-pronged embodiment of democracy.
Most Heroic Moment: The simple, searing lines of 1990’s “Turnover.” D.B.

SOLD OUT ! We are VERY pleased to present a very special example Alvarez Yairi Classical guitar . The condition of this high end instrument is excellent plus and this guitar is simply wonderful. This is hand built example by The Kazou Yairi himself, Japanese Master Luthier. For those of you not familiar with the Premier Japanese Master Luthier Kazou Yairi and his masterfuly built instruments you may enjoy this vidio introduction to YAIRI GUITARS http://www.youtube.com/watch?v=NPRyLPouYZM The model is CY116 and is a very high-end professional guitar and is in excellent Plus condition. Only the highest grade woods used as you can see ...choice AAA Flamed-Quilted and is 3-dimensional depth is a work of art as you can see by the pictures. This guitar plays and sound AMAZING and is truly inspirational. This guitar shows very little fret wear. There are just a few minor nicks or scratches which is normal wear for a guitar of this vintage that has been lovingly played. This one is a one owner adult owned guitar and comes with its high quality custom hard shell case too. General Specs: Alvarez Yairi CY116 Classical Acoustic Guitar The CY116's Solid Cedar Top is adorned by an elaborate wooden mosaic rosette. Burled Maple Back/Sides give this classical amazing clarity and warmth like the fiery Andalusian plains that inspired the music that this guitar was born to perform. With room-filling projection, the CY116 is a guaranteed conversation starter. You hear it in the elegant pacing of a classical air. You see it in the vivid charm of a folk dance. Specs: Burled Mahogany Back/Sides Solid Cedar Top Mahogany Neck Ebony Fingerboard Scale: 25 1/2" (650mm) Width at Nut: 2" (51mm) Rosewood Bridge Ivory Body Binding Wooden Mosaic Rosette Gold Vintage Open-Style Tuning Machines .
Fender once again has proved itself to be a great name in the guitar industry by introducing this super acoustic model. It’s a full-size guitar and is IDEAL FOR BEGINNERS to start their musical journey as guitarists with it. It’s designed for learners so you must not expect too much from it, but yet, it is capable of producing great sounds in the hands of an advanced player that’s why claimed to be best suited for all styles of music.

"My part is just a few notes over and over," Iggy Pop once said about the Stooges song "TV Eye," "but Ron created a whole world around that." In Asheton's hands – on proto-punk anthems like "I Wanna Be Your Dog" and "No Fun" – the classic three-digit barre chord felt more like a superpowered battering ram: droning, relentless and almost mystical. (Asheton, who died in 2009, called it "those magical three fingers.") You can hear Asheton's wild-man approach all over the playing of Kurt Cobain, Thurston Moore and Jack White.

Modulation stompboxes like our BF-3 Flanger should be after the tone-producing effects like distortion, wah, etc. so they can process and modify the tone built by the pedals before it. If you put it before the distortion, then you are distorting the sound of the flanger. Maybe that’s what you’re after, but in general, put the BF-3 and other modulation effects after the tone-shaping (and noise–producing) pedals. And then there are the ambience effects: delay and reverb. As we discussed earlier, reverb—and sometimes delay, depending on the space—is the last thing that happens before the sound reaches your ears in a physical space, so these go last. Delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.

Squier has now seen fit to introduce Fender's revered '72 Thinline to its own range, and it looks the business, with white pearloid scratchplate, finely carved f-hole and Fender- embossed humbuckers. While you'll find the gloss-finished modern C neck across much of Squier's Vintage Modified range, you're unlikely to find tones quite like the Thinline's anywhere else, certainly at this price. Cleans from the neck and middle positions are punchy and persuasive, not dissimilar to fat P-90-ish single coils, but flicking over to the bridge humbucker yields a burly, resonant voice that screams for big open chords and an overdriven valve amp. That's why it's one of the best electric guitars for Indie and alt-rock players.

Once CNC (computer numeric control) equipment was introduced into guitar factories starting in the late 1980s and continuing on into the 1990s, it became far less of an issue where a guitar was made. Many of the CNC machines were made in Japan. In some cases the difference between an American-made guitar versus a Japanese-made guitar versus a Korean-made guitar was little more than where the machine was located. To make a guitar in the USA involved putting a Japanese-made CNC machine on a boat and sending it to the US whereupon it could be programmed in the USA and then American or other wood could be fed into the machine, which would spit out components made to tolerances within a few thousandths of an inch of the programming. By contrast a Japanese-made guitar would be produced by leaving the CNC machine in Japan, programming it with a disc done in the USA, and then importing wood to be put into the machine which would spit out components to the same specifications as those which would be made by a similar machine in the USA. A Korean-made guitar could be remarkably similar since the Japanese-made CNC machine could be sent to Korea whereupon the same process could be done there. By 1990 the quantity of guitars made in Japan was nowhere near what it had been earlier, but Korean production was in high gear. While some Japanese instruments have come to be viewed as quite desirable and collectible, I have seen little evidence of such activity with respect to Korean instruments, but the fact remains that the better-quality Korean guitars are remarkably good and most certainly are suitable for use on stage or in the studio.

Buy a Kay online at our main web site, call our store or visit our Chicago guitar shop in person and check out the new Kay Vintage Reissues. We're not one of those guitar super stores, you will find we're friendly, knowledgeable and easy to work with.  We sell guitars world wide and we want to earn your business so please don't hesitate to contact us for our best Kay prices.  We ship Kay Basses and Guitars to Canada, Australia, UK, Europe, Japan and other locations.
With expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with "locking" nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use.