From guitar faces to the different kinds of axes, here is the Top 10 Greatest Guitar Players. Squeezing the talent that’s blessed our ears for all these years into a list of 10 is just as difficult as choosing which limbs to lose or keep. The list is by no means definitive, but it’s an accurate representation for the uniqueness of the music the guitarist has made. In short, these famous guitar players have played the melodies that have made grown men cry, and probably gave you a taste of how your guitar face would look like pretending to play that solo. Of course many great guitarists may not have made this top 10 list, but feel free to add your own favorites in the comments.

I have my El Maya EM 1300 ( El Maya Japan, Kobe instruments) since 1989 but it was built during the end of 1982 and EL Maya Strat version, guitars are neck trough body, amazing instruments they are better then any guitars i ever played maybe I'm not objective , only my US Hamer is close or on that level. Does Anybody have any El Maya? and that you maybe wish to sell it? More over what are the fer prices for the almost mint state of those guitars, regards miki.

Guitarists have their own special system of music notation called guitar tablature, or "guitar tabs" for short. Using guitar tabs, a guitarist can play a wide variety of music without ever having to learn how to read standard sheet music. Though guitar tabs aren't a perfect way of describing music, they've allowed newer generations of guitarists to quickly and easily share information about how to play songs across the globe via the internet. Every guitarist should have at least a basic understanding of how to read tablature - it's the de facto shorthand for much of the guitar music you'll find written out online.
In terms of tone, a smaller dreadnought body will be slightly lacking in projecting the low-end frequencies. That doesn't matter here thanks to being an acoustic electric. With that said, the trebles and mids give away its origin, tone-wise. Play a few chords and you'll immediately hear that classic 'Taylor sound' even from a lower mid-range guitar like this one.
Emerald City Guitars is the professional’s choice for guitar repair in Seattle! A partial list of some of our more well known clients: Bill Frisell, Billy F. Gibbons, Jimmie Vaughan, The Black Crowes, Pearl Jam, Jessica Dobson & Deep Sea Diver, Telekinesis, The Walkmen, Lynval Golding, The Supersuckers, Mudhoney, Randy Hansen, Death Cab for Cutie, Clinton Fearon, KD Lang, Henry Cooper, Alien Crime Syndicate, Orbit Studios, The Lonely H, Mars Hill Church, Fleet Foxes, The Magic Mirrors… and YOU!
Gibson gave this guitar a comfortable V neck profile, which together with shorter 24.75" scale length and 1.725" nut width make this guitar one of the easiest instruments to play in this list. My only complaint with this guitar is its bank breaking price, but this steep price point and exclusivity play an important role in making this iconic instrument more appealing. Start saving now if you want to be one of the privileged few who can play this guitar.
You might initially think that Music Lab is narcissistic for creating a line of guitar VSTs with the word “real” in them. But after you hear the first note, you’ll be kicking yourself for doubting it. There is a lot to cover with the “Real” line, and since they share many of the same features, we will slowly go over the components of these VSTs throughout the reviews for them.  
Ovation are relative newcomers to the world of vintage guitars, only launching their range at the 1967 NAMM show in Chicago. Ovation started as an off-shoot of founder Charles Kamen's work in the aviation field, studying vibration and resonances in helicopter blades. Whilst other respected American manufacturers relied heavily of quality nautral products and the artistry of their master luthiers, Ovation came very much from a science and engineering perspective: they used oscillographs to test existing instruments, and came up with the famous Ovation rounded back design, and suggested the use of a synthetic material, Lyrachord, claiming it to be more resonant that any wood.

The irony with guitars is that an original 1950s Gibson, for example, whilst capable of producing the most amazing sounds, and playing like butter - may not stay in tune, or intonate quite as well as a modern day equivalent. Consequently old guitars have very often been 'upgraded', with original parts lost. But this can seriously down-grade their value. Replacing missing parts with original or period-correct ones can very much improve a guitars collectability, saleability and therefore value.
Like the others, you also have a doubled signal path and like the flanger, you have a short delay. This time you have a bit of a longer delay which causes a more subtle effect. As its name suggests it offers a choir-like effect that adds a certain level of depth to your tone. It also gives it a unique wavering quality that suits a lot of different styles of music.
Founded in 1974, Ernie Ball Music Man is an American guitar and bass company that produces high-quality instruments for pros and enthusiasts. Their guitars are on the expensive side. Most of them cost well over $2000. They are, however, extremely well-made. Music Man guitars Music Man guitars are predominantly made in the USA. This is part of the reason they can be so expensive. The sound is bright and lively. They are very versatile and can be used to play any genre. In addition to guitars, they also make bass guitars that are also very high-quality. One aspect of Music Man that is particularly good is their signature models. Their John Petrucci, or JP, models are some of their more well-known models. They also feature signature models for Steve Morse, Albert Lee, and more. If you’re interested in high-quality, signature model guitars, Ernie Ball Music Man guitars could be the kind of guitars for you.

Adding effects at the mixing stage gives the engineer greater creative flexibility, but if the guitarist needs to hear the effects to play, then you may get a better artistic performance by recording them with the take. All I'd say on this point is that editing is much more difficult if the sound is recorded with delay or reverb, so an alternative is not to record these effects initially, but still add them to the monitor mix for the player's benefit during performance. Effects like chorus and wah-wah can be recorded straight off, if required, as they don't affect the ease with which a part can be edited. Ultimately, the performance is what really counts, so compromise in favour of the player's artistic needs rather than your technical needs where a choice has to be made.

Much like any other job or hobby, building guitar pedals requires specific tools in order to get the job done. Furthermore, before you start putting together your first build, it is vital that you have a significant understanding of how to solder circuit board electronics – otherwise you may find yourself at a loss due to faulty soldering (believe me, this is not a fun issue to troubleshoot).  If you need to practice soldering, here is a helpful video.
While National blithely ignored Beauchamp’s electric experiments, their competition – Dobro – was next to enter the electric arena as early as 1933, with the introduction of the Dobro All-Electric. Basically, the All-Electric was a mahogany-bodied Model 37, most usually outfitted with a 12-fret square neck. It had a large lightning-bolt-engraved coverplate, two screen holes, three little holes under the fingerboard, a slothead, and rosewood ‘board with dot inlays. Instead of the usual resonator, this had a large metal plate where the cone assembly would normally be and a Stimson pickup mounted just in front of the bridge, curiously enough with the poles slanted from the bass side near the bridge toward the middle on the treble side.
If you love the sound of both acoustic and electric guitars, but you want to play both at the same time without draping one of each over your shoulder, then an Acoustic simulator pedal is ideal. These pedals take your guitar signal – regardless of what electric guitar you’re playing and make it sound like it’s an acoustic. These are often used by guitarists on stage who want to switch between an acoustic and electric guitar sound during a set or even the same song. The Boss AC-3 Acoustic Simulator is a great option.
At some point, possibly in 1967 – please forgive the fuzzy chronology, – Unicord was purchased by Gulf + Western, the big oil/hospitality conglomerate. This was part the corporate acquisition mania rage of the mid-’60s which included deals for Fender (CBS), Gretsch (Baldwin), Valco (Seeburg), Kay (Valco) and Gibson (Norlin). Either just before or just after the Gulf + Western purchase of Unicord, Unicord was merged with Merson. It was probably then Merson moved from New York City to Westbury.
Much of the difference between one make of guitar and another is in the player’s head. I doubt whether many people listening would really notice the difference and they certainly wouldn’t care. That said, there are differences in feel and in the player’s perception of the sound. I currently have four Gibsons and two Fenders, so you can see where my sympathies lie, but currently I’m more taken with either of my two Gretschs. One point of correction about scale length though. Over the years 25.5″ became standardised, probably by Martin. Fender copied this when it produced the Broadcaster/ Nocaster/ Telecaster since 25.5″ was the scale length for a guitar and Fender had no previous experience hence the poor neck radius and bad controls. Gibson, being actually considerably more innovative (I.e. the truss rod, the archtop, the raised finger rest/ scratch plate, controls for each pickup etc etc in fact most of the fundamentals we now take for granted) had worked out that scale length should be a function of body size. All of Gibson’s full size (17″ and up) guitars have 25.5″ scale lengths. Smaller bodies get shorter necks. So 24.75″ is only one of Gibson’s scale lengths sunce it has used shorter and longer as appropriate.

A complete step-by-step guide to maintenance and setup of your electric guitar. This guide, packed with images, will show every aspect of essential electric guitar care such as changing the strings, adjusting the neck, and setting the action to match your playing style. It will also show you how to fix common electric guitar problems such as buzzing strings, scratchy pots and much more. Electric Guitar Repair and Maintenance is a great resource for any guitar owner.

Silvertone starter pack is incredibly hard to beat. The candy blue finish gives the guitar a gorgeous aesthetic that looks fully professional. The pickup selector has 5 positions, and there are two tone knobs to give even more control over the sound. Stratocaster fans will love this guitar! Also included in the set is a gig bag, small Silvertone amp, strap, 5 picks, Allan wrenches, strings, a clip-on tuner, and a tremolo bar.
The design goal of these hybrid micro heads was to provide usable power from a compact digital power amp section combined with a real analogue preamplifier in a very small and light metal chassis. The amps each weigh about 1.1 lbs, and fit in one hand (Dimensions (W x D x H): 135mm x 100mm x 75mm/5.31” x 3.94” x 2.95”). These amps are advertised as 50 watt heads, so the power section is a special Class D design as might be expected. What is unexpected is the preamp design that includes a new type of vacuum tube (valve) called the Nutube 6P1, which is the result of Korg working with Japanese vacuum fluorescent display (VFD) company Noritake Itron Corp.(Ise Electronics Corp). As such, the Nutube is a dual-triode vacuum tube packaged similarly to a VFD "chip" which makes it mountable on a circuit board using holes and pads not unlike a DIP. The miniaturised flat package topography, low power consumption, and low heat, long life attributes of the Nutube are key contributors to deploying an analogue tube preamp in such a small, lightweight footprint. Power consumption is only 3.43 Amps which is provided by a DC19VAC adapter, but Vox rates the MV50 power output at 50 Watts. However, note the 50W rating is for a 4Ω load; power output specs are as follows: Max 50W RMS at 4 Ohms, 25W RMS at 8 Ohms, 12.5W RMS at 16 Ohms.

Likewise, the two coils of a humbucker which are wired in series can be connected in parallel. This results in a brighter sound and lower output resembling that of a single-coil pickup. Compared to coil split the sound is usually a bit fuller and the pickup's hum-cancelling properties are retained. Like coil split, wiring a humbucker in parallel requires the start and end of both coils to be accessible, which is sometimes possible with stock pickups. Unlike coil split, it also requires a DPDT switch (coil split only requires a SPDT switch).[26][28]
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 48mm - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Dot - # of Strings: 7 - Scale Length: 25.5" (65cm) - Headstock: 7 In-Line - Bridge: Edge Zero II - Cutaway: Double - Hardware: Chrome - Pickups: DiMarzio - Pickup Configuration: H-H - String Instrument Finish: Black - Made In: Japan
Now you should have all you need to assemble your first effects pedal. Make sure you have a clean, well-ventilated area to work. Wash your hands before you start. If you like, wear some conductive nitrile gloves. Avoid handling components any more than necessary. Contaminants on the components and PCB will make them harder to solder and can cause reliability problems. Certain IC’s can be damaged by static electricity from handling. Solder is hot and creates dangerous fumes so be careful. Follow the instructions carefully, in particular making sure you insert components in the correct places and the correct way around. Many components look alike and some are polarity sensitive, so take your time to get it right. Solder one pin of a component and then double-check it before soldering the rest. It’s much easier to move or remove a component with only one lead soldered to the board.
1. Intonation: I have a brand-new Epiphone LP that will not completely intonate on the G, A, and Low E. Fretted notes remain sharp. I have replaced the factory strings with new Ernie Balls and tried every trick in the book to move the saddles as far away from the neck as possible. Many LP owners have this problem. Other than returning the guitar to Guitar World, my only other option is swap out the factory bridge with a wider one. You mention the latter option in one of your early comments, and I've decided to try it. I just bought a Gotoh one online. Hopefully, that will solve the problem.
Fender came up with the California Series lineup of acoustic guitars to celebrate its Southern California roots. Every aspect of this guitar is uniquely Fender, from the Strat-style headstock and vintage-style slot tuners to the slim-taper neck and preamp, which is the product of the collaboration between Fender and trusted electronics brand Fishman.

A record store owner named Leo Mintz explained his observation to his friend, DJ Alan Freed.  Freed had a popular show on WJW in Cleveland Ohio and loved finding and playing new music to his large audience. Mintz told him of a new trend he saw in his record store where many teenagers from white families were coming in and buying Rhythm and Blues records.
An instrument unlike any other, the electric guitar gives musicians a feeling and hands-on experience that's nearly indescribable. Even with the same electric guitar, no two players sound exactly alike. Every nuance of the player's hands comes out in the electric guitar's tone, both in fretting and plucking the strings. The best players master not only command of the electric guitar, but also its interaction with their effects and amplifier. It's difficult to imagine a world without the combination of the electric guitar and amplifier, yet it's still relatively new in music. By the turn of the twentieth century, it only made sense that the popularity of the guitar would soon be combined with the onset of electronics. Over the past 75 years, the electric guitar has established itself as one of the most iconic, unforgettable instruments in the world. From jazz and big band to rock 'n' roll and funk, popular music would be drastically different today had it not been for the electric guitar.
Yes, I see your point, quite. This article was not aimed at experienced Strat stranglers, but more at their parents or relatives, who may have wished to give them a pedal as a holiday gift but didn't know what to purchase or what the effects might be. We thought a simple guide might be helpful for the completely uninformed. Obviously, we're not an established guitar journal, so thank you very much for your helpful and constructive critique.
Gibson, like many guitar manufacturers, had long offered semi-acoustic guitars with pickups, and previously rejected Les Paul and his "log" electric in the 1940s. In apparent response to the Telecaster, Gibson introduced the first Gibson Les Paul solid body guitar in 1952 (although Les Paul was actually brought in only towards the end of the design process for expert fine tuning of the nearly complete design and for marketing endorsement [2]). Features of the Les Paul include a solid mahogany body with a carved maple top (much like a violin and earlier Gibson archtop hollow body electric guitars) and contrasting edge binding, two single-coil "soapbar" pickups, a 24¾" scale mahogany neck with a more traditional glued-in "set" neck joint, binding on the edges of the fretboard, and a tilt-back headstock with three machine heads (tuners) to a side. The earliest models had a combination bridge and trapeze-tailpiece design that was in fact designed by Les Paul himself, but was largely disliked and discontinued after the first year. Gibson then developed the Tune-o-matic bridge and separate stop tailpiece, an adjustable non-vibrato design that has endured. By 1957, Gibson had made the final major change to the Les Paul as we know it today - the humbucking pickup, or humbucker. The humbucker, invented by Seth Lover, was a dual-coil pickup which featured two windings connected out of phase and reverse-wound, in order to cancel the 60-cycle hum associated with single-coil pickups; as a byproduct, however, it also produces a distinctive, more "mellow" tone which appeals to many guitarists. The more traditionally designed and styled Gibson solid-body instruments were a contrast to Leo Fender's modular designs, with the most notable differentiator being the method of neck attachment and the scale of the neck (Gibson-24.75", Fender-25.5"). Each design has its own merits. To this day, the basic design of many solid-body electric guitar available today are derived from the original designs - the Telecaster, Stratocaster and the Les Paul.
Even if you are on a budget, it’s always worth looking in the higher price brackets and considering something a little more expensive, which will offer better sound quality (which is always encouraging), better build quality (usually more comfortable to hold and play), looks cooler (which will keep you motivated), and will last you longer – allowing you to grow with the guitar. It’s best to buy at the top end of what you can afford. For additional inspiration, make sure to check out this electric guitar list.

If you're a fan of the Grateful Dead, check out the D'Angelico Premier Series DC Grateful Dead Semi-Hollow Electric Guitar. In the acoustic department, the Alvarez Artist Series AD60 dreadnought acoustic guitar comes highly rated, thanks to its hand-selected spruce top, mahogany back and sides, and powerful tone. Singer-songwriters and fans of acoustic-driven music must check out the latest Ed Sheeran Martin guitar, the comfortable, easy-to-play Divide Signature Edition Little Martin acoustic-electric.

Kay was founded in 1931 by Henry “Kay” Kuhrmeyer. They supplied guitars to Montgomery Wards and others. During the 1950s their electric guitars were competitors for the Silvertone and Danelectro guitars. The company dissolved in 1968. Kay guitars are not currently in production. However, Kay also produced cellos and basses. Engelhardt-Link purchased the acoustic line of instruments from Kay. These are still being produced in Elk Grove Village, IL.
airline guitar Airline Guitars amp amps bass guitar danelectro eastwood guitar Eastwood Guitars electric guitar electric guitars fender george harrison gibson gibson guitars guitar guitar amp guitar amps guitarists guitar lessons guitar review guitars Guitar Theory guitar tips harmony guitars japanese guitars japanese made guitars jimi hendrix kay guitars les paul lessons mosrite NAMM Updates rare guitar rare guitars silvertone teisco the beatles tips tone tremelo valco vintage amp Vintage Amps vintage guitar Vintage Guitars

Last week we talked about choosing the right “Guitar Effects to Expand Your Sound” with sub-topics of “Guitar Effects Used By Your Favorite Pro Guitarists” and “Guitar Effects To Use For Each Music Genre”. Now that you’ve hopefully acquired some pedals of your own, there is another important topic that greatly influences the outcome of your tone – your pedalboard order.
The 700-series guitars had all controls and pickups mounted on a faux-tortise shell pickguard. That makes it very easy to do any required work on the electronics. By contrast, On the 800-series, with a couple of exceptions, the tone and volume control pots and the jack socket are mounted to the body, a three-way pickup switch, and a lead/rhythm slide switch are mounted to the pickguard; and the pickups are mounted to individual little mounting plates made of the faux-tortise shell material.
This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, while its 12” radius lets you bend notes deeply and its Plek-dressed medium-jumbo nickel frets deliver silky playability. The moment you open the luxurious deluxe Tolex hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing.
Neck Construction – The neck part of the guitar includes the fretboard and headstock. The tuners are mounted on this part of the guitar. The width and profile of the neck affects the playability of the guitar. Most necks are either “C” or “U” shaped. In most cases, the fretboard is made from a thin layer of rosewood or ebony, but some guitars have maple necks. Fretboard have position dots and other inlaid markers that assist the player. There are generally 3 types of necks – bolt on, set neck and neck through.
In most cases, the neck will sit tightly in the neck cavity hard up against the edge of the body. But if the scale length isn’t correct from this position you may need to make minor adjustments to the neck position. If the bridge holes aren’t yet drilled, it’s better to adjust the bridge position than the neck. The saddles will also allow you approx. 10mm adjustment.

Buy a kit if you want to make things easier. Several companies produce electric guitar kits that include all of the parts you’ll need, prepared and ready to assemble. If you just want to get your feet wet, these can be a good choice. While you won’t get the full experience of making a guitar from scratch, you’ll still get the satisfaction of putting it together and finishing it yourself.[6]

There were few things more powerful than Stevie Ray Vaughan with a guitar in his hands. Though he was deeply entrenched in the blues idiom, he took it to an entirely new and original level. Heavily influenced by Jimi Hendrix, his triple string bends and lightning fast double stops were things of absolute beauty. While every one of his songs is an electric blues guitar masterclass, perhaps his most impressive performance is in the song “Texas Flood.”

• Vibrato: There are several types of vibrato — a/k/a tremolo or whammy bar — tailpieces. They debuted in the 1930s via inventor Doc Kaufman, who developed a vibrato unit that was mounted on a guitar’s body and had an arm that moved side to side. Today’s vibrato arms move up and down and are dominated by the top-mounted Bigsby style vibrato and various types of through-body vibrato tailpieces, ranging from the spring-tensioned arms found on many classic thin solid bodied guitar models to the dive-bombing units like the Kahler and Floyd Rose types favored by metal shredders. These also have fine-tuners for each string, to compensate for any detuning the use of the vibrato arm might produce. Gibson also offers a top-mounted Vibrola unit of its own design.
Gibson sells guitars under a variety of brand names[5] and builds one of the world's most iconic guitars, the Gibson Les Paul. Many Gibson instruments are highly collectible. Gibson was at the forefront of innovation in acoustic guitars, especially in the big band era of the 1930s; the Gibson Super 400 was widely imitated. In 1952, Gibson introduced its first solid-body electric guitar, the Les Paul, which became its most popular guitar to date— designed by Ted McCarty and Les Paul.
TAB uses a series of hyphens to represent the strings. Each string is identified on the far left by the name of the note produced when played open. The high-e (string 1) is at the top; low-E (string 6) is at the bottom. There is no restriction for how long a line of TAB can be, but for readability it should be kept short enough to prevent wrapping on a web-site or printed page.
The full-size guitar in black by DirectlyCheap should therefore be on your list for consideration. Made out of linden, basswood and catalpa with a particularly ornate inlay around the sound hole, this model has a really lovely sound for the price. Just keep in mind that, like other guitar shipments, when you receive the guitar, you will have to “set up” the neck. If you need help with this, a guitar tech will assist.
In the early 1980s Collings decided to move to San Diego, California but never made it further than Austin, Texas.[3][4] He started out sharing work space with fellow luthiers Tom Ellis, a builder of mandolins, and Mike Stevens. A few years later he decided to continue on his own and take the craft more seriously, moving into a one-stall garage shop.
Your guitar is equipped with a volume knob – but that doesn’t mean you won’t benefit from a volume pedal. Very useful for various applications, the volume pedal can act – as you imagine – as a pure volume for your guitar signal (placed right before the amp) and also as a master volume if placed after your amp. By using a stereo volume pedal you can further expand the tonal possibilities of your setup. Ernie Ball makes a variety of volume pedals with different specifications (in order to match your guitar, amplifier or musical needs). Mooer offers a very compact and stylish pedal, the Expline – while Boss still sells to this day the FV-500-H, a pedal that passed the test of time and still performs amazingly well.
Subsequent years brought new company ownership to the Gibson Guitar Company. During the “Norlin Era“, Gibson Les Paul body designs were greatly altered, most notably, the change to the neck volute. Because the Les Paul had the reputation of having an easily broken neck joint, the volute strengthened the neck where it joined the headstock to avert breakage. To further increase the strength, the neck woods were changed from mahogany to a three-piece maple design. The LP body was changed from a one-piece mahogany with a maple top into multiple slabs of mahogany with multiple pieced maple tops. This is referred to as “multipiece” construction, and sometimes incorrectly referred to as a “pancake” body. The expression “pancake body” actually refers to a body made of a thin layer of maple sandwiched between two slabs of mahogany, with a maple cap. The grain of the maple was placed at 90 degrees to that of the mahogany. The “pancake”-like layers are clearly visible when looking at the edge of the guitar. This process is also known as “crossbanding”, and was done for strength and resistance to cupping/warping. Crossbanding was phased out by 1977.
This is because you won’t have to go through all the hassle of doing research on pickups, then finding a way to mount them without damaging your guitar. While magnetic pickups are surely quite easy to install, contact pickups or blended systems with microphones and preamps might require removing the top, drilling, using all sorts of screws and plates, etc.

{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(914) 963-2949, visibilitySalePrice=2099.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, displaySku=113478791, invMsgBackOrdered=false, skuPriceVisibility=1, stickerUrlLink=null, kitCarouselSkuIds=null, stickerURL=null, availableDate=Thu Oct 25 07:46:49 PDT 2018, invMsgAvailability=, serialized=false, listPrice=2299.99, isShipsInternational=false, name=Cherry Sunburst, storeCity=Yonkers, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Yonkers at Ridge Hill, newPrice=2099.99, condition=null, priceDropPrice=200.00, status=instock, stickerClass=stickerEmphasis, stickerText=Price Drop, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Fair, prop65=null, salePrice=2099.99, warranty=false, wasPrice=2299.99, storeId=861, displayId=113478791, stickerDesc=Price Drop, isOnSale=false} 2,099.99 USD
My granddaughter really liked this book. I know it was used but the CD and the wall chart were missing. I wish that would have been noted in the comments. Some of the other book sellers noted that one or the other of these were missing so I didn't order from them. Nothing was noted in the comments on this. My granddaughter was happy with the book and wanted to keep it.
The Sweetwater Used Gear Marketplace is a lot like Craigslist or eBay, only it's exclusively for gear, and it's 100% free — there are absolutely no charges or fees involved. Buying or selling, you'll be interacting directly with other musicians and audio enthusiasts, so we've included some tips below to help navigate your transactions. Learn More | Safe Shopping Tips
Those influences helped him develop a truly unique rhythm guitar style that no one has been able to duplicate since. Perhaps the coolest thing about Joe Strummer is no one could ever predict what he would do next. In 1981, the Clash played 17 consecutive nights at the 3,500-capacity Bond’s International Casino nightclub in Manhattan, but when they returned to New York the next year they played two sold-out shows at Shea Stadium as an opening act for the Who.

We’re bookending this article with two Epiphone guitars. Why? Because Les Paul was the man. And G-400 Pro was actually a successor Les Paul model from ’61 to ’68, making this guitar a true icon of rock, power, and endless sustain. With a mahogany neck and rosewood fretboard, this guitar has the looks and, with Alnico Classic Pro humbucking pickups, the tonal quality is excellent. 

A: If it looks like a ??? it almost certainly is a ??? Because the factory used to change the hardware at a whim there will be slight variations. This has, in most cases, nothing to do with a particular year but more to do with what happened to be to hand at the time. Some exceptions are pickups, pickguards, logos and headstocks. All I know is here on the website if you look hard enough. Also bear in mind that your guitar may have been modified at some stage in its life.
Hook isn’t worried the current challenging economic pressures will jeopardize the guitarist’s iconic status. “The guitar hero will never go away,” he said. “People adore this image of the guitarist almost being like a cowboy. You will always see the odd-looking kid walking down the street holding a guitar — there just might not be as many of them.”
While the general purpose is to emulate classic "warm-tube" sounds, distortion pedals such as the ones in this list can be distinguished from overdrive pedals in that the intent is to provide players with instant access to the sound of a high-gain Marshall amplifier such as the JCM800 pushed past the point of tonal breakup and into the range of tonal distortion known to electric guitarists as "saturated gain." Although most distortion devices use solid-state circuitry, some "tube distortion" pedals are designed with preamplifier vacuum tubes. In some cases, tube distortion pedals use power tubes or a preamp tube used as a power tube driving a built-in "dummy load." Distortion pedals designed specifically for bass guitar are also available. Some distortion pedals include:

This guide is as marvelously written as it is exceedingly informative. It takes a long look at each of the major and minor American guitar companies — Gibson chief among them — and recounts the story of every guitar to come off their workbenches. Buoyed by scads of historical photos and thoroughly researched copy, this book earns its place at the top of this list.
In the early 1970s, Southland Musical Merchandise Corporation apparently acquired the Kent name and shifted manufacturing to Korea. The font for the logo changed and emphasis was placed on lower prices with a higher profit margin at the expense of quality. Most of those guitars were knock-offs of Gibson Les Pauls and ES-335s and Fender Stratocasters. I'm not watching those.
Tablature, or Tab, is a very important tool that allows guitar players to easily learn how to play chords, melodies, and songs. Learning how to read guitar Tab can be a mystery for some newer guitar players. In this guitar lesson, we are going to learn how to read guitar Tabs and go over some of the more common elements you will see when you pull up a Tab for a song you want to learn. Try this lesson if you want to learn how to read guitar sheet music.
Clarence White helped shape two genres: His acoustic flatpicking, first displayed as a teenager when he and his brother formed the Kentucky Colonels band, was key in making the guitar a lead instrument in bluegrass. Later, he set the stage for country rock and transferred that dynamic precision and melodic symmetry to the electric guitar. A top session man in the Sixties, he played on the Byrds' 1968 landmark, Sweetheart of the Rodeo. After he joined the band later that year, White brought a full-bodied rock elation to his California-inflected Nashville chops. "He never played anything that sounded vaguely weak," said the Byrds' leader, Roger McGuinn. "He was always driving… into the music." White had returned to bluegrass with the acclaimed Muleskinner album when he was killed by a drunk driver in 1973. He was 29. "Clarence was immersed in hard country and bluegrass," said Dan Auerbach of the Black Keys. "He incorporated those elements into rock & roll, and it totally blew people's minds."

I started playing harmonica when I was a little boy. I used to get pushed out to entertain adults at two o'clock in the morning. I also had a kind of obsession about the guitar. The first actual toy that I had that I loved was a little wooden guitar that my folks brought me from a shop that sold brooms and buckets and stuff like that. I used to carry that guitar around like my friends would carry a football. I took this thing with me everywhere.
I picked up a Lyle 630L recently for $100. Best playing acoustic I've ever played and sounds awesome, but it has a few issues. First being the fact that it's been played long and hard, with at least 3 frets showing hard wear. I had to tweak the torsion rod and raise the adjustable bridge some to stop a few frets from buzzing, but one is still a stickler. Bridge has cracked between the peg holes but the pegs still stay secure. My thought is to use good epoxy to stabilize it. Any thoughts? Also, leaving the strings taught over the years seems to have warped the body some, but there are no cracks or finish peeling from it. One tuner has been replaced with another style tuner, (looks like crap from the back) and I'd love to replace it.
4-conductor humbuckers are fun to wire because they offer many combinations to play with. Some pickups have another bare wire which is there for shielding and should always be grounded. Manufacturers have their own color code, so make sure you find the right color code before connecting anything. Below is color code diagram for common pickup manufacturers.
In January 1986, Gibson changed ownership and began manufacturing a range of varied Les Paul models to suit different user needs. The 1980s also saw the end to several design characteristics that were classic to the Les Paul, including the volute and maple neck. However, due to consumer demand, the Gibson Les Paul guitar is available today in an array of choices, ranging from guitars equipped with modern digital electronics to classic re-issue models built to match the look and specifications of the guitar’s earliest production runs from 1952 to 1960.
To make it simple, we chose a four-chord song: The Ramones' "Blitzkrieg Bop." At first run-through, the game asked Andrew to play only one note every few seconds. As he successfully hit those, it added more and more until he was playing almost every note. On the next run through, the AI suddenly threw in two-note power chords. Once he mastered those, the game leveled up again, asking him to play every chord of the real guitar track that Johnny Ramone would have played. Finally, we unlocked Master Mode, which challenged us to play the song from memory. Only the measures appeared on the screen—no notes.
Gretsch G5422G12 Electromatic Double Cutaway Electric Guitar, 12-String   New from$999.99In Stockor 12 payments of $83.34 Free Ground Shipping Reverend 2017 Airwave 12 Electric Guitar, 12-String   New from$1,199.00In Stockor 12 payments of $99.92 FREE 2-DAY SHIPPING D'Angelico Premier DC Electric Guitar, 12-String (with Gig Bag)   New from$899.99Only 2 Left!or 12 payments of $75 Free Ground Shipping Ibanez Artcore AS7312 Electric Guitar, 12-String   New from$499.99In Stockor 8 payments of $62.50 FREE 2-DAY SHIPPING See All Electric Guitars: 12-String

An octave generator is a simplified form of pitch shifting. This effect will allow you to add an octave—usually below—the fundamental note. Units that add a lower octave exclusively are referred to as sub-octave generators. They can add a lot of depth to the guitarist’s sound. Many bass players also use sub-octave generators to significantly fatten up their sound.

This company really does nothing for me. Hideous designs, cumbersome shaped guitars and the fact that they keep milking dime bags name just makes me feel like they don't have much else. There are definitely worse brands out there like first act and daisy rock (shudders) but I've always thought dean just always sucked as a metal guitar company and b.c. rich isn't to far behind them in my opinion.
Today I was working on my fave guitar, a James Trussart Steelcaster. Instead of reconnecting my tone pot and capacitor as usual, I ran two wires from the tone pot’s wiper and ground terminals, the spots where the cap normally connects, and soldered them to a little piece of stripboard with sockets for connecting the caps. Then I recorded quick demos for six possible cap values. I started with the two most common values, and then added two lower values and two higher ones.

Boss is an effects legend, but thanks to the digital expertise of parent company Roland, the brand now also has an amp that promises organic, valve-like tones at an impressively low price. It does this by using the same Tube Logic technology employed in last year’s 150-watt Waza Craft head, and other Roland amps. The K100 doesn’t invite direct comparison with specific amp brands and models. Instead, there are five generic voices: Acoustic, Clean, Crunch, Lead and Brown. You can pre-load 15 different effects types into the amp, with 55 to currently choose from when you link the Katana to the Boss Tone Studio application. The Katana may look plain, but its tones are truly exceptional. The Crunch voice is responsive and dynamic, while the Brown solo sound is as good as many USA valve-powered competitors. Start using the Tone Studio editor and the Katana’s edge becomes sharper still, with different effects chain presets and assignable control parameters.

They say good things come in small packages. Well, "they" weren't wrong! The Orange Micro Terror Guitar Amplifier Head is no bigger than a lunchbox, but packs enough power to stand up to some of the bigger amplifiers out there, especially when you connect it to a 2x12 or even a 4x12 cab. It features a combination of solid state and valve technology and throws out 20w of pure power thanks to the 1 x 12AX7/ECC83 pre amp valve. Easy to use, affordable and even easier to carry around, you can easily gig with this or use it as a practice amp at home when coupled with the custom built Orange PPC108 1x8 Closed Back Speaker Cabinet.

Some people like to play the two notes on 5th and 4th strings with a small barre with the 3rd finger. It's O.K. to do that, but I think using two fingers gives you a better finger position on the notes; you'll get a better sound that way, it makes it easier to change chords most of the time and easier to get all the thin strings muted. I strongly advise to learn it this way, and then if you still prefer to use the little barre you have the option of choosing whichever one works best in any situation!
One type of "effect" I've thought would be useful to have in a multi-pedal, though I've not seen it, would be to have a configurable automatic gain control (level compression) which would be applied before a distortion effect, followed by a gain adjustment after the distortion which would undo some or all of the effect of the previous AGC. For example, things might be set up so that playing at a level of -20dBm would boost the signal by 21dB (clipping slightly) and then reduce volume by 20dB, while playing at -10dBm would boost by 12dB (clipping a bit more) and then reduce by 12dB. – supercat Apr 30 '13 at 22:01
BAJAAO bring to you the best and extensive range Electro Acoustic Guitars also known as the Acoustic Electric Guitar or Semi Electric guitar in layman terms from all over the world. Versatile in design, the electro acoustic guitar is known for its smooth sound and powerful projection. At its core, an acoustic-electric guitar is acoustic in style fitted with a pickup device allowing it to be plugged into an amplifier, a number of effect pedals or played on its own for a more intimate sound. Heard in basically every genre of music, these guitars are indispensable in almost any modern band setting. In acoustic-electric nylon string guitars, piezoelectric pickups and microphones are used because magnetic pickups are not capable of picking up vibrations of non-magnetic materials. The design is distinct from a semi-acoustic guitar, which is an electric guitar but with the addition of sound chambers within the guitar body. Buy the best Electro Acoustic Guitars online with with the best and affordable price in India. Make your shopping experience a wonderful one with us.
The Effect:These pedals keep the original clarity of your sound intact, depending on how you tune it, you can use a little bit of overdrive, that adds some grit to the signal, with higher tuning you can get relatively more aggressive overdrive sound that’s still tame and if you push your overdrive pedal to the limits you might get a similar sound to that of a distortion pedal’s lower settings. A good overdrive (like the Ibanez TS9 Tube Screamer) is an essential solution for those of you wanting sound enhancement with lower interference, while having the option to add some aggression in your sound, but without taking it to extreme degrees.
Processors, on the other hand, comprise an entirely different water heating appliance filled with piscean vertebrates, as they tend not to need any of the dry sound, other than in a few specialist applications. As a rule, processors such as EQ and compression are connected only via track, bus or master insert points — at least until you have the necessary experience to understand why you might want to break the rules once in a while. Having got that off my chest, let's look at some specific effects (we'll look more closely at processors another time).
As suggested by the numerical designation, Martin’s 28 Series was essentially an upgrade or refinement of the earlier 18 Series. Martin typically indicates fancier materials and appointments with a higher number (a D-28 is fancier dreadnought than a D-18, etc.). These consisted of one guitar, the E-28, and one bass, the EB-28. The first prototypes appeared in June of 1980; production began in January of 1981.
Solder the electronics. The pickups you purchased should come with a schematic that shows exactly how to connect these to the controls and to the input for the guitar cord. Follow this schematic, using an ordinary electronics soldering iron to complete the job. Wrap any wiring connections with electrical tape, unless the manufacturer’s instructions suggest another method.
Firstly these are both 'mic-level' or 'instrument-level' inputs (they carry very quiet signals) but hi-Z signals are more prone to interference. The lo-Z signal consists of the instrument's mono signal (hot) and it's inverted waveform (cold), the cables are twisted around one another such that any interfering signal generated in one is negated by the other (much the same as the way a humbucking pickup works).
Adding effects at the mixing stage gives the engineer greater creative flexibility, but if the guitarist needs to hear the effects to play, then you may get a better artistic performance by recording them with the take. All I'd say on this point is that editing is much more difficult if the sound is recorded with delay or reverb, so an alternative is not to record these effects initially, but still add them to the monitor mix for the player's benefit during performance. Effects like chorus and wah-wah can be recorded straight off, if required, as they don't affect the ease with which a part can be edited. Ultimately, the performance is what really counts, so compromise in favour of the player's artistic needs rather than your technical needs where a choice has to be made.
These two components work in tandem to influence tone and playability. The bridge is mounted to the lower portion of the guitar body. The strings are routed over it before terminating on the body or on a tailpiece. Bridges are designed to compensate for varying string lengths, gauges, and metals, ensuring that the strings remain in tune with each other. Bridges usually allow adjustment of the string's length to bring each string into tune along the entire length of the fretboard. This process is called intonation, and is an important part of setting up a guitar for optimal performance. Some bridges permit string height adjustments that affect the the ease with which the strings can be fretted, and is often referred to as the guitar's "action."
The Limited Edition Slash Firebird Premium Outfit also features Epiphone's rock solid nickel hardware including a classic Epiphone LockTone ABR Tune-o-matic bridge and Stopbar tailpiece, Kluson Reissue Firebird Banjo-style machine heads with a 12:1 ratio, a Switchcraft 1/4" output jack, and Epiphone Straplocks. A standard Epiphone hard case is also available.
Gibson’s drive to recapture the magic of the original “Patent Applied For” humbucker pickups of the 1950s culminated with the introduction of the Burstbucker line in the early 1990s. In 2002, Gibson followed up this innovative accomplishment with yet another breakthrough in pickup design—the Burstbucker Pro, designed specifically for the new Les Paul Standards. The Burstbucker Pro features an Alnico V magnet (instead of the Alnico II), which offers slightly higher output and allows preamps to be driven a little harder to achieve a more natural break-up. Like all Burstbuckers, the Burstbucker Pro has asymmetrical coils—true to the original PAFs—which supply a more open sound. The Burstbucker Pro Neck is wound slightly less than the original PAFs, while the Burstbucker Pro Bridge is slightly overwound for increased output. The Burstbucker Pro pickups are also wax potted to allow loud volume pressures with minimal feedback.
There is clearly a great deal that the guitarist can do for the sound by changing guitars, strings and amps, but from the perspective of the recording engineer it's also important to think about how the guitar cab is interacting with the room it's in. For example, Roy Thomas Baker mentions that he sometimes sets up the same guitar cab in different rooms because of the effect on the sound. Even if you're restricted to one room, a number of producers suggest trying out different positions of the amp in the room. Tony Visconti: "It's not so much that you're miking a guitar — you're miking a guitar in a room. I had a cellist in here recently, and I moved her until I got a good sound. Once I put her in one particular corner, her cello just sang — the room just filled up with the low end, and the sound exploded! A person who hasn't had years of experience might not have thought of doing that, but I could tell there was something lacking when she was in the centre of the room. That's mic technique. It's not so much the instrument; the room is very much part of the sound."
If you can’t commit hours of your time to tracking down the right electric guitar amp, we listed here a number of good ones that are varied enough to fulfill most requirements. Among these, we found the Vox Pathfinder 10 Denim to make a great choice for those that are just getting into playing guitar or who just need a good, inexpensive practice amp. It’s solid-state, so you won’t have to blow your money on replacing lamps and this will also make it easier to tweak its voice to whatever tune you want to try out. Folks who use it appreciate that resembles the overdrive on a lamp amp pretty well and at 10 W of power it can be used from a garage without any complaints from the neighbors. If this isn’t available, The Blackstar IDCORE10 will offer similar quality and even more of a possibility to play around with sound effects.

Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.
Gibson originally offered a single cutaway from the guitar body, so that players could access higher frets.  Notice that Fender includes a double cutaway design so the player’s thumb also has access to the higher side of the neck.  Gibson used “3 On A Side” tuners, so Fender offered “6 Inline” tuning pegs.  It was these choices that created a large part of the visual appeal of the Strat.
{ "thumbImageID": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "defaultDisplayName": "Ibanez GIO series GRGR120EX Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "White", "sku": "sku:site51500000032825", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-White-1500000032825.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51500000032826", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue-1500000032826.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue/J48397000001000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }